linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 21/43] KVM: VMX: Invert handling of CR0.WP for EPT without unrestricted guest
Date: Fri, 23 Apr 2021 17:46:23 -0700	[thread overview]
Message-ID: <20210424004645.3950558-22-seanjc@google.com> (raw)
In-Reply-To: <20210424004645.3950558-1-seanjc@google.com>

Opt-in to forcing CR0.WP=1 for shadow paging, and stop lying about WP
being "always on" for unrestricted guest.  In addition to making KVM a
wee bit more honest, this paves the way for additional cleanup.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/vmx/vmx.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 805888541142..d0050c140b4d 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -135,8 +135,7 @@ module_param(allow_smaller_maxphyaddr, bool, S_IRUGO);
 #define KVM_VM_CR0_ALWAYS_OFF (X86_CR0_NW | X86_CR0_CD)
 #define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR0_NE
 #define KVM_VM_CR0_ALWAYS_ON				\
-	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | 	\
-	 X86_CR0_WP | X86_CR0_PG | X86_CR0_PE)
+	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
 
 #define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR4_VMXE
 #define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
@@ -3103,9 +3102,7 @@ void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 	kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR);
 }
 
-static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
-					unsigned long cr0,
-					struct kvm_vcpu *vcpu)
+static void ept_update_paging_mode_cr0(unsigned long cr0, struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
@@ -3124,9 +3121,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
 	}
-
-	if (!(cr0 & X86_CR0_WP))
-		*hw_cr0 &= ~X86_CR0_WP;
 }
 
 void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
@@ -3139,6 +3133,8 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
 	else {
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON;
+		if (!enable_ept)
+			hw_cr0 |= X86_CR0_WP;
 
 		if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
 			enter_pmode(vcpu);
@@ -3157,7 +3153,7 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 #endif
 
 	if (enable_ept && !is_unrestricted_guest(vcpu))
-		ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
+		ept_update_paging_mode_cr0(cr0, vcpu);
 
 	vmcs_writel(CR0_READ_SHADOW, cr0);
 	vmcs_writel(GUEST_CR0, hw_cr0);
-- 
2.31.1.498.g6c1eba8ee3d-goog


  parent reply	other threads:[~2021-04-24  0:51 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-24  0:46 [PATCH 00/43] KVM: x86: vCPU RESET/INIT fixes and consolidation Sean Christopherson
2021-04-24  0:46 ` [PATCH 01/43] KVM: nVMX: Set LDTR to its architecturally defined value on nested VM-Exit Sean Christopherson
2021-05-19  5:30   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 02/43] KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping Sean Christopherson
2021-05-19  5:59   ` Reiji Watanabe
2021-05-19 18:47     ` Sean Christopherson
2021-05-21  7:07       ` Reiji Watanabe
2021-05-21 15:28         ` Sean Christopherson
2021-05-24  4:29           ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 03/43] KVM: SVM: Require exact CPUID.0x1 match when stuffing EDX at INIT Sean Christopherson
2021-05-19  5:30   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 04/43] KVM: SVM: Fall back to KVM's hardcoded value for EDX at RESET/INIT Sean Christopherson
2021-05-19  5:41   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 05/43] KVM: x86: Split out CR0/CR4 MMU role change detectors to separate helpers Sean Christopherson
2021-05-19  5:31   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 06/43] KVM: x86: Properly reset MMU context at vCPU RESET/INIT Sean Christopherson
2021-05-17 16:57   ` Reiji Watanabe
2021-05-18 20:23     ` Sean Christopherson
2021-05-18 22:42       ` Reiji Watanabe
2021-05-19 17:16         ` Sean Christopherson
2021-05-24  4:57           ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 07/43] KVM: VMX: Remove explicit MMU reset in enter_rmode() Sean Christopherson
2021-04-24  0:46 ` [PATCH 08/43] KVM: SVM: Drop explicit MMU reset at RESET/INIT Sean Christopherson
2021-05-19  5:32   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 09/43] KVM: SVM: Drop a redundant init_vmcb() from svm_create_vcpu() Sean Christopherson
2021-05-19  5:32   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 10/43] KVM: VMX: Move init_vmcs() invocation to vmx_vcpu_reset() Sean Christopherson
2021-05-19  5:33   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 11/43] KVM: x86: WARN if the APIC map is dirty without an in-kernel local APIC Sean Christopherson
2021-04-24  0:46 ` [PATCH 12/43] KVM: x86: Remove defunct BSP "update" in local APIC reset Sean Christopherson
2021-05-26  6:54   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 13/43] KVM: x86: Migrate the PIT only if vcpu0 is migrated, not any BSP Sean Christopherson
2021-04-24  0:46 ` [PATCH 14/43] KVM: x86: Don't force set BSP bit when local APIC is managed by userspace Sean Christopherson
2021-05-26  6:55   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 15/43] KVM: x86: Set BSP bit in reset BSP vCPU's APIC base by default Sean Christopherson
2021-05-26  6:55   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 16/43] KVM: VMX: Stuff vcpu->arch.apic_base directly at vCPU RESET Sean Christopherson
2021-05-26  6:55   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 17/43] KVM: x86: Open code necessary bits of kvm_lapic_set_base() " Sean Christopherson
2021-05-26  7:04   ` Reiji Watanabe
2021-05-26 15:15     ` Sean Christopherson
2021-04-24  0:46 ` [PATCH 18/43] KVM: x86: Consolidate APIC base RESET initialization code Sean Christopherson
2021-05-26  7:04   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 19/43] KVM: x86: Move EDX initialization at vCPU RESET to common code Sean Christopherson
2021-05-19  5:45   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 20/43] KVM: SVM: Don't bother writing vmcb->save.rip at vCPU RESET/INIT Sean Christopherson
2021-05-19  5:34   ` Reiji Watanabe
2021-04-24  0:46 ` Sean Christopherson [this message]
2021-04-24  0:46 ` [PATCH 22/43] KVM: VMX: Remove direct write to vcpu->arch.cr0 during " Sean Christopherson
2021-05-19  5:34   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 23/43] KVM: VMX: Fold ept_update_paging_mode_cr0() back into vmx_set_cr0() Sean Christopherson
2021-04-24  0:46 ` [PATCH 24/43] KVM: nVMX: Do not clear CR3 load/store exiting bits if L1 wants 'em Sean Christopherson
2021-04-24  0:46 ` [PATCH 25/43] KVM: VMX: Pull GUEST_CR3 from the VMCS iff CR3 load exiting is disabled Sean Christopherson
2021-04-24  0:46 ` [PATCH 26/43] KVM: VMX: Process CR0.PG side effects after setting CR0 assets Sean Christopherson
2021-04-24  0:46 ` [PATCH 27/43] KVM: VMX: Skip emulation required checks during pmode/rmode transitions Sean Christopherson
2021-04-24  0:46 ` [PATCH 28/43] KVM: nVMX: Don't evaluate "emulation required" on VM-Exit Sean Christopherson
2021-04-24  0:46 ` [PATCH 29/43] KVM: SVM: Tweak order of cr0/cr4/efer writes at RESET/INIT Sean Christopherson
2021-05-19 18:16   ` Reiji Watanabe
2021-05-19 19:58     ` Sean Christopherson
2021-05-23 23:04       ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 30/43] KVM: SVM: Drop redundant writes to vmcb->save.cr4 " Sean Christopherson
2021-05-19  5:35   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 31/43] KVM: SVM: Stuff save->dr6 at during VMSA sync, not " Sean Christopherson
2021-04-24  0:46 ` [PATCH 32/43] KVM: VMX: Skip pointless MSR bitmap update when setting EFER Sean Christopherson
2021-04-24  0:46 ` [PATCH 33/43] KVM: VMX: Refresh list of user return MSRs after setting guest CPUID Sean Christopherson
2021-05-19  5:35   ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 34/43] KVM: VMX: Don't _explicitly_ reconfigure user return MSRs on vCPU INIT Sean Christopherson
2021-04-24  0:46 ` [PATCH 35/43] KVM: x86: Move setting of sregs during vCPU RESET/INIT to common x86 Sean Christopherson
2021-05-17 23:50   ` Reiji Watanabe
2021-05-18 21:45     ` Sean Christopherson
2021-05-21  5:19       ` Reiji Watanabe
2021-04-24  0:46 ` [PATCH 36/43] KVM: VMX: Remove obsolete MSR bitmap refresh at vCPU RESET/INIT Sean Christopherson
2021-04-24  0:46 ` [PATCH 37/43] KVM: nVMX: Remove obsolete MSR bitmap refresh at nested transitions Sean Christopherson
2021-04-24  0:46 ` [PATCH 38/43] KVM: VMX: Don't redo x2APIC MSR bitmaps when userspace filter is changed Sean Christopherson
2021-04-24  0:46 ` [PATCH 39/43] KVM: VMX: Remove unnecessary initialization of msr_bitmap_mode Sean Christopherson
2021-04-24  0:46 ` [PATCH 40/43] KVM: VMX: Smush x2APIC MSR bitmap adjustments into single function Sean Christopherson
2021-04-24  0:46 ` [PATCH 41/43] KVM: VMX: Remove redundant write to set vCPU as active at RESET/INIT Sean Christopherson
2021-04-24  0:46 ` [PATCH 42/43] KVM: VMX: Drop VMWRITEs to zero fields at vCPU RESET Sean Christopherson
2021-05-24 21:15   ` Paolo Bonzini
2021-05-24 22:21     ` Jim Mattson
2021-05-24 22:28     ` Sean Christopherson
2021-05-24 22:48       ` Jim Mattson
2021-05-25  1:02         ` Sean Christopherson
2021-04-24  0:46 ` [PATCH 43/43] KVM: x86: Drop pointless @reset_roots from kvm_init_mmu() Sean Christopherson
2021-05-27 19:11   ` Sean Christopherson
2021-05-27 19:25     ` Sean Christopherson
2021-06-10 16:54 ` [PATCH 00/43] KVM: x86: vCPU RESET/INIT fixes and consolidation Paolo Bonzini
2021-06-10 19:22   ` Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210424004645.3950558-22-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).