From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
David Rhodes <david.rhodes@cirrus.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH 2/3] ASoC: cs42l42: Use device_property API instead of of_property
Date: Mon, 26 Apr 2021 16:53:02 +0100 [thread overview]
Message-ID: <20210426155303.853236-2-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210426155303.853236-1-tanureal@opensource.cirrus.com>
From: Richard Fitzgerald <rf@opensource.cirrus.com>
Use the device_property APIs so that the code will work on devicetree
and ACPI systems.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 60 +++++++++++++++-----------------------
1 file changed, 24 insertions(+), 36 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 2143957b95e6..bce541735437 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -20,10 +20,9 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <sound/core.h>
@@ -1637,17 +1636,15 @@ static const unsigned int threshold_defaults[] = {
CS42L42_HS_DET_LEVEL_1
};
-static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
+static int cs42l42_handle_device_data(struct device *dev,
struct cs42l42_private *cs42l42)
{
- struct device_node *np = i2c_client->dev.of_node;
unsigned int val;
- unsigned int thresholds[CS42L42_NUM_BIASES];
+ u32 thresholds[CS42L42_NUM_BIASES];
int ret;
int i;
- ret = of_property_read_u32(np, "cirrus,ts-inv", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-inv", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_INV_EN:
@@ -1655,7 +1652,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_inv = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-inv DT value %d\n",
val);
cs42l42->ts_inv = CS42L42_TS_INV_DIS;
@@ -1668,8 +1665,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_TS_INV_MASK,
(cs42l42->ts_inv << CS42L42_TS_INV_SHIFT));
- ret = of_property_read_u32(np, "cirrus,ts-dbnc-rise", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-dbnc-rise", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_DBNCE_0:
@@ -1683,7 +1679,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_dbnc_rise = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-dbnc-rise DT value %d\n",
val);
cs42l42->ts_dbnc_rise = CS42L42_TS_DBNCE_1000;
@@ -1697,8 +1693,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
(cs42l42->ts_dbnc_rise <<
CS42L42_TS_RISE_DBNCE_TIME_SHIFT));
- ret = of_property_read_u32(np, "cirrus,ts-dbnc-fall", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,ts-dbnc-fall", &val);
if (!ret) {
switch (val) {
case CS42L42_TS_DBNCE_0:
@@ -1712,7 +1707,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->ts_dbnc_fall = val;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,ts-dbnc-fall DT value %d\n",
val);
cs42l42->ts_dbnc_fall = CS42L42_TS_DBNCE_0;
@@ -1726,13 +1721,12 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
(cs42l42->ts_dbnc_fall <<
CS42L42_TS_FALL_DBNCE_TIME_SHIFT));
- ret = of_property_read_u32(np, "cirrus,btn-det-init-dbnce", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,btn-det-init-dbnce", &val);
if (!ret) {
if (val <= CS42L42_BTN_DET_INIT_DBNCE_MAX)
cs42l42->btn_det_init_dbnce = val;
else {
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,btn-det-init-dbnce DT value %d\n",
val);
cs42l42->btn_det_init_dbnce =
@@ -1743,14 +1737,13 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_BTN_DET_INIT_DBNCE_DEFAULT;
}
- ret = of_property_read_u32(np, "cirrus,btn-det-event-dbnce", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,btn-det-event-dbnce", &val);
if (!ret) {
if (val <= CS42L42_BTN_DET_EVENT_DBNCE_MAX)
cs42l42->btn_det_event_dbnce = val;
else {
- dev_err(&i2c_client->dev,
- "Wrong cirrus,btn-det-event-dbnce DT value %d\n", val);
+ dev_err(dev,
+ "Wrong cirrus,btn-det-event-dbnce DT value %d\n", val);
cs42l42->btn_det_event_dbnce =
CS42L42_BTN_DET_EVENT_DBNCE_DEFAULT;
}
@@ -1759,19 +1752,17 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
CS42L42_BTN_DET_EVENT_DBNCE_DEFAULT;
}
- ret = of_property_read_u32_array(np, "cirrus,bias-lvls",
- (u32 *)thresholds, CS42L42_NUM_BIASES);
-
+ ret = device_property_read_u32_array(dev, "cirrus,bias-lvls",
+ thresholds, ARRAY_SIZE(thresholds));
if (!ret) {
for (i = 0; i < CS42L42_NUM_BIASES; i++) {
if (thresholds[i] <= CS42L42_HS_DET_LEVEL_MAX)
cs42l42->bias_thresholds[i] = thresholds[i];
else {
- dev_err(&i2c_client->dev,
- "Wrong cirrus,bias-lvls[%d] DT value %d\n", i,
+ dev_err(dev,
+ "Wrong cirrus,bias-lvls[%d] DT value %d\n", i,
thresholds[i]);
- cs42l42->bias_thresholds[i] =
- threshold_defaults[i];
+ cs42l42->bias_thresholds[i] = threshold_defaults[i];
}
}
} else {
@@ -1779,8 +1770,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->bias_thresholds[i] = threshold_defaults[i];
}
- ret = of_property_read_u32(np, "cirrus,hs-bias-ramp-rate", &val);
-
+ ret = device_property_read_u32(dev, "cirrus,hs-bias-ramp-rate", &val);
if (!ret) {
switch (val) {
case CS42L42_HSBIAS_RAMP_FAST_RISE_SLOW_FALL:
@@ -1800,7 +1790,7 @@ static int cs42l42_handle_device_data(struct i2c_client *i2c_client,
cs42l42->hs_bias_ramp_time = CS42L42_HSBIAS_RAMP_TIME3;
break;
default:
- dev_err(&i2c_client->dev,
+ dev_err(dev,
"Wrong cirrus,hs-bias-ramp-rate DT value %d\n",
val);
cs42l42->hs_bias_ramp_rate = CS42L42_HSBIAS_RAMP_SLOW;
@@ -1930,11 +1920,9 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
(1 << CS42L42_ADC_PDN_SHIFT) |
(0 << CS42L42_PDN_ALL_SHIFT));
- if (i2c_client->dev.of_node) {
- ret = cs42l42_handle_device_data(i2c_client, cs42l42);
- if (ret != 0)
- goto err_disable;
- }
+ ret = cs42l42_handle_device_data(&i2c_client->dev, cs42l42);
+ if (ret != 0)
+ goto err_disable;
/* Setup headset detection */
cs42l42_setup_hs_type_detect(cs42l42);
--
2.31.1
next prev parent reply other threads:[~2021-04-26 15:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-26 15:53 [PATCH 1/3] ASoC: cs42l42: Add support for set_jack calls Lucas Tanure
2021-04-26 15:53 ` Lucas Tanure [this message]
2021-04-26 15:53 ` [PATCH 3/3] ASoC: cs42l42: Add support for ACPI table match entry Lucas Tanure
2021-05-11 8:25 ` [PATCH 1/3] ASoC: cs42l42: Add support for set_jack calls Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210426155303.853236-2-tanureal@opensource.cirrus.com \
--to=tanureal@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=david.rhodes@cirrus.com \
--cc=james.schulman@cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).