[PATCH net-next v8 0/9] microchip: add support for ksz88x3 driver family

[PATCH net-next v8 0/9] microchip: add support for ksz88x3 driver family

[Oleksij Rempel]

changes v8:
- add Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
- fix build issue on "net: dsa: microchip: ksz8795: move register
  offsets and shifts to separate struct"

changes v7:
- Reverse christmas tree fixes
- remove IS_88X3 and use chip_id instead
- drop own tag and use DSA_TAG_PROTO_KSZ9893 instead

changes v6:
- take over this patch set
- rebase against latest netdev-next and fix regressions
- disable VLAN support for KSZ8863. KSZ8863's VLAN is not compatible to the
  KSZ8795's. So disable it for now and mainline it separately.

This series adds support for the ksz88x3 driver family to the dsa based
ksz drivers. The driver is making use of the already available ksz8795
driver and moves it to an generic driver for the ksz8 based chips which
have similar functions but an totaly different register layout.

The mainlining discussion history of this branch:
v1: https://lore.kernel.org/netdev/20191107110030.25199-1-m.grzeschik@pengutronix.de/
v2: https://lore.kernel.org/netdev/20191218200831.13796-1-m.grzeschik@pengutronix.de/
v3: https://lore.kernel.org/netdev/20200508154343.6074-1-m.grzeschik@pengutronix.de/
v4: https://lore.kernel.org/netdev/20200803054442.20089-1-m.grzeschik@pengutronix.de/
v5: https://lore.kernel.org/netdev/20201207125627.30843-1-m.grzeschik@pengutronix.de/

Andrew Lunn (1):
  net: phy: Add support for microchip SMI0 MDIO bus

Michael Grzeschik (7):
  net: dsa: microchip: ksz8795: change drivers prefix to be generic
  net: dsa: microchip: ksz8795: move cpu_select_interface to extra
    function
  net: dsa: microchip: ksz8795: move register offsets and shifts to
    separate struct
  net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support
  dt-bindings: net: dsa: document additional Microchip KSZ8863/8873
    switch
  net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0

Oleksij Rempel (1):
  net: dsa: microchip: ksz8795: add support for ksz88xx chips

 .../bindings/net/dsa/microchip,ksz.yaml       |   2 +
 .../devicetree/bindings/net/mdio-gpio.txt     |   1 +
 drivers/net/dsa/microchip/Kconfig             |  10 +-
 drivers/net/dsa/microchip/Makefile            |   1 +
 drivers/net/dsa/microchip/ksz8.h              |  69 ++
 drivers/net/dsa/microchip/ksz8795.c           | 884 ++++++++++++------
 drivers/net/dsa/microchip/ksz8795_reg.h       | 125 +--
 drivers/net/dsa/microchip/ksz8795_spi.c       |  46 +-
 drivers/net/dsa/microchip/ksz8863_smi.c       | 213 +++++
 drivers/net/dsa/microchip/ksz_common.h        |   3 +-
 drivers/net/mdio/mdio-bitbang.c               |   8 +-
 drivers/net/mdio/mdio-gpio.c                  |   8 +
 include/linux/mdio-bitbang.h                  |   3 +
 13 files changed, 983 insertions(+), 390 deletions(-)
 create mode 100644 drivers/net/dsa/microchip/ksz8.h
 create mode 100644 drivers/net/dsa/microchip/ksz8863_smi.c

-- 
2.29.2

[PATCH net-next v8 1/9] net: dsa: microchip: ksz8795: change drivers prefix to be generic

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

The driver can be used on other chips of this type. To reflect
this we rename the drivers prefix from ksz8795 to ksz8.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---
v1 -> v4: - extracted this change from bigger previous patch
v4 -> v5: - removed extra unavailable variables in ksz8_r_vlan_entries
v5 -> v6: - move vlan variable size changes to other patch
---
 drivers/net/dsa/microchip/ksz8795.c     | 224 ++++++++++++------------
 drivers/net/dsa/microchip/ksz8795_spi.c |   2 +-
 drivers/net/dsa/microchip/ksz_common.h  |   2 +-
 3 files changed, 111 insertions(+), 117 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index b4b7de63ca79..91297df4371c 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -74,7 +74,7 @@ static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 			   bits, set ? bits : 0);
 }
 
-static int ksz8795_reset_switch(struct ksz_device *dev)
+static int ksz8_reset_switch(struct ksz_device *dev)
 {
 	/* reset switch */
 	ksz_write8(dev, REG_POWER_MANAGEMENT_1,
@@ -117,8 +117,7 @@ static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
 			true);
 }
 
-static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
-			      u64 *cnt)
+static void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
 {
 	u16 ctrl_addr;
 	u32 data;
@@ -148,8 +147,8 @@ static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
 	mutex_unlock(&dev->alu_mutex);
 }
 
-static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
-			      u64 *dropped, u64 *cnt)
+static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			   u64 *dropped, u64 *cnt)
 {
 	u16 ctrl_addr;
 	u32 data;
@@ -195,7 +194,7 @@ static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 	mutex_unlock(&dev->alu_mutex);
 }
 
-static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+static void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 {
 	/* enable the port for flush/freeze function */
 	if (freeze)
@@ -207,7 +206,7 @@ static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
 }
 
-static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
+static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
 {
 	struct ksz_port_mib *mib = &dev->ports[port].mib;
 
@@ -235,8 +234,7 @@ static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
 	memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
 }
 
-static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
-			    u64 *data)
+static void ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data)
 {
 	u16 ctrl_addr;
 
@@ -248,8 +246,7 @@ static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
 	mutex_unlock(&dev->alu_mutex);
 }
 
-static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
-			    u64 data)
+static void ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data)
 {
 	u16 ctrl_addr;
 
@@ -261,7 +258,7 @@ static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
 	mutex_unlock(&dev->alu_mutex);
 }
 
-static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 {
 	int timeout = 100;
 
@@ -284,9 +281,9 @@ static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	return 0;
 }
 
-static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
-				   u8 *mac_addr, u8 *fid, u8 *src_port,
-				   u8 *timestamp, u16 *entries)
+static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
+				u8 *mac_addr, u8 *fid, u8 *src_port,
+				u8 *timestamp, u16 *entries)
 {
 	u32 data_hi, data_lo;
 	u16 ctrl_addr;
@@ -298,7 +295,7 @@ static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
 	mutex_lock(&dev->alu_mutex);
 	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
 
-	rc = ksz8795_valid_dyn_entry(dev, &data);
+	rc = ksz8_valid_dyn_entry(dev, &data);
 	if (rc == -EAGAIN) {
 		if (addr == 0)
 			*entries = 0;
@@ -341,13 +338,13 @@ static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
 	return rc;
 }
 
-static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
-				   struct alu_struct *alu)
+static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+				struct alu_struct *alu)
 {
 	u32 data_hi, data_lo;
 	u64 data;
 
-	ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+	ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data);
 	data_hi = data >> 32;
 	data_lo = (u32)data;
 	if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
@@ -370,8 +367,8 @@ static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
 	return -ENXIO;
 }
 
-static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
-				    struct alu_struct *alu)
+static void ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+				 struct alu_struct *alu)
 {
 	u32 data_hi, data_lo;
 	u64 data;
@@ -394,17 +391,17 @@ static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
 		data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
 
 	data = (u64)data_hi << 32 | data_lo;
-	ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data);
+	ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data);
 }
 
-static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
+static void ksz8_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
 {
 	*fid = vlan & VLAN_TABLE_FID;
 	*member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
 	*valid = !!(vlan & VLAN_TABLE_VALID);
 }
 
-static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
+static void ksz8_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
 {
 	*vlan = fid;
 	*vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
@@ -412,12 +409,12 @@ static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
 		*vlan |= VLAN_TABLE_VALID;
 }
 
-static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
+static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
 {
 	u64 data;
 	int i;
 
-	ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
+	ksz8_r_table(dev, TABLE_VLAN, addr, &data);
 	addr *= dev->phy_port_cnt;
 	for (i = 0; i < dev->phy_port_cnt; i++) {
 		dev->vlan_cache[addr + i].table[0] = (u16)data;
@@ -425,7 +422,7 @@ static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
 	}
 }
 
-static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
 {
 	int index;
 	u16 *data;
@@ -435,11 +432,11 @@ static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
 	data = (u16 *)&buf;
 	addr = vid / dev->phy_port_cnt;
 	index = vid & 3;
-	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
 	*vlan = data[index];
 }
 
-static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
 {
 	int index;
 	u16 *data;
@@ -449,13 +446,13 @@ static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
 	data = (u16 *)&buf;
 	addr = vid / dev->phy_port_cnt;
 	index = vid & 3;
-	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
 	data[index] = vlan;
 	dev->vlan_cache[vid].table[0] = vlan;
-	ksz8795_w_table(dev, TABLE_VLAN, addr, buf);
+	ksz8_w_table(dev, TABLE_VLAN, addr, buf);
 }
 
-static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 {
 	u8 restart, speed, ctrl, link;
 	int processed = true;
@@ -546,7 +543,7 @@ static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 		*val = data;
 }
 
-static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 {
 	u8 p = phy;
 	u8 restart, speed, ctrl, data;
@@ -644,15 +641,15 @@ static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 	}
 }
 
-static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds,
-						      int port,
-						      enum dsa_tag_protocol mp)
+static enum dsa_tag_protocol ksz8_get_tag_protocol(struct dsa_switch *ds,
+						   int port,
+						   enum dsa_tag_protocol mp)
 {
 	return DSA_TAG_PROTO_KSZ8795;
 }
 
-static void ksz8795_get_strings(struct dsa_switch *ds, int port,
-				u32 stringset, uint8_t *buf)
+static void ksz8_get_strings(struct dsa_switch *ds, int port,
+			     u32 stringset, uint8_t *buf)
 {
 	struct ksz_device *dev = ds->priv;
 	int i;
@@ -663,8 +660,7 @@ static void ksz8795_get_strings(struct dsa_switch *ds, int port,
 	}
 }
 
-static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
-				    u8 member)
+static void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
 {
 	u8 data;
 
@@ -675,8 +671,7 @@ static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
 	dev->ports[port].member = member;
 }
 
-static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
-				       u8 state)
+static void ksz8_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
 {
 	struct ksz_device *dev = ds->priv;
 	int forward = dev->member;
@@ -734,7 +729,7 @@ static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
 	p->stp_state = state;
 	/* Port membership may share register with STP state. */
 	if (member >= 0 && member != p->member)
-		ksz8795_cfg_port_member(dev, port, (u8)member);
+		ksz8_cfg_port_member(dev, port, (u8)member);
 
 	/* Check if forwarding needs to be updated. */
 	if (state != BR_STATE_FORWARDING) {
@@ -749,7 +744,7 @@ static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
 		ksz_update_port_member(dev, port);
 }
 
-static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
+static void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
 {
 	u8 learn[DSA_MAX_PORTS];
 	int first, index, cnt;
@@ -782,9 +777,8 @@ static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
 	}
 }
 
-static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
-				       bool flag,
-				       struct netlink_ext_ack *extack)
+static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
+				    struct netlink_ext_ack *extack)
 {
 	struct ksz_device *dev = ds->priv;
 
@@ -793,9 +787,9 @@ static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
-				 const struct switchdev_obj_port_vlan *vlan,
-				 struct netlink_ext_ack *extack)
+static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
+			      const struct switchdev_obj_port_vlan *vlan,
+			      struct netlink_ext_ack *extack)
 {
 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 	struct ksz_device *dev = ds->priv;
@@ -804,8 +798,8 @@ static int ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
 
 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
 
-	ksz8795_r_vlan_table(dev, vlan->vid, &data);
-	ksz8795_from_vlan(data, &fid, &member, &valid);
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(data, &fid, &member, &valid);
 
 	/* First time to setup the VLAN entry. */
 	if (!valid) {
@@ -815,8 +809,8 @@ static int ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
 	}
 	member |= BIT(port);
 
-	ksz8795_to_vlan(fid, member, valid, &data);
-	ksz8795_w_vlan_table(dev, vlan->vid, data);
+	ksz8_to_vlan(fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
 
 	/* change PVID */
 	if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
@@ -834,8 +828,8 @@ static int ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
-				 const struct switchdev_obj_port_vlan *vlan)
+static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
+			      const struct switchdev_obj_port_vlan *vlan)
 {
 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 	struct ksz_device *dev = ds->priv;
@@ -847,8 +841,8 @@ static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
 
 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
 
-	ksz8795_r_vlan_table(dev, vlan->vid, &data);
-	ksz8795_from_vlan(data, &fid, &member, &valid);
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(data, &fid, &member, &valid);
 
 	member &= ~BIT(port);
 
@@ -861,8 +855,8 @@ static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
 	if (pvid == vlan->vid)
 		new_pvid = 1;
 
-	ksz8795_to_vlan(fid, member, valid, &data);
-	ksz8795_w_vlan_table(dev, vlan->vid, data);
+	ksz8_to_vlan(fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
 
 	if (new_pvid != pvid)
 		ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
@@ -870,9 +864,9 @@ static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
-				   struct dsa_mall_mirror_tc_entry *mirror,
-				   bool ingress)
+static int ksz8_port_mirror_add(struct dsa_switch *ds, int port,
+				struct dsa_mall_mirror_tc_entry *mirror,
+				bool ingress)
 {
 	struct ksz_device *dev = ds->priv;
 
@@ -894,8 +888,8 @@ static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
-				    struct dsa_mall_mirror_tc_entry *mirror)
+static void ksz8_port_mirror_del(struct dsa_switch *ds, int port,
+				 struct dsa_mall_mirror_tc_entry *mirror)
 {
 	struct ksz_device *dev = ds->priv;
 	u8 data;
@@ -915,7 +909,7 @@ static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
-static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct ksz_port *p = &dev->ports[port];
 	u8 data8, member;
@@ -981,10 +975,10 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	} else {
 		member = dev->host_mask | p->vid_member;
 	}
-	ksz8795_cfg_port_member(dev, port, member);
+	ksz8_cfg_port_member(dev, port, member);
 }
 
-static void ksz8795_config_cpu_port(struct dsa_switch *ds)
+static void ksz8_config_cpu_port(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
 	struct ksz_port *p;
@@ -999,7 +993,7 @@ static void ksz8795_config_cpu_port(struct dsa_switch *ds)
 	p->vid_member = dev->port_mask;
 	p->on = 1;
 
-	ksz8795_port_setup(dev, dev->cpu_port, true);
+	ksz8_port_setup(dev, dev->cpu_port, true);
 	dev->member = dev->host_mask;
 
 	for (i = 0; i < dev->phy_port_cnt; i++) {
@@ -1010,7 +1004,7 @@ static void ksz8795_config_cpu_port(struct dsa_switch *ds)
 		 */
 		p->vid_member = BIT(i);
 		p->member = dev->port_mask;
-		ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+		ksz8_port_stp_state_set(ds, i, BR_STATE_DISABLED);
 
 		/* Last port may be disabled. */
 		if (i == dev->phy_port_cnt)
@@ -1034,7 +1028,7 @@ static void ksz8795_config_cpu_port(struct dsa_switch *ds)
 	}
 }
 
-static int ksz8795_setup(struct dsa_switch *ds)
+static int ksz8_setup(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
 	struct alu_struct alu;
@@ -1045,7 +1039,7 @@ static int ksz8795_setup(struct dsa_switch *ds)
 	if (!dev->vlan_cache)
 		return -ENOMEM;
 
-	ret = ksz8795_reset_switch(dev);
+	ret = ksz8_reset_switch(dev);
 	if (ret) {
 		dev_err(ds->dev, "failed to reset switch\n");
 		return ret;
@@ -1068,7 +1062,7 @@ static int ksz8795_setup(struct dsa_switch *ds)
 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
 			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
 
-	ksz8795_config_cpu_port(ds);
+	ksz8_config_cpu_port(ds);
 
 	ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true);
 
@@ -1083,7 +1077,7 @@ static int ksz8795_setup(struct dsa_switch *ds)
 			   BROADCAST_STORM_PROT_RATE) / 100);
 
 	for (i = 0; i < (dev->num_vlans / 4); i++)
-		ksz8795_r_vlan_entries(dev, i);
+		ksz8_r_vlan_entries(dev, i);
 
 	/* Setup STP address for STP operation. */
 	memset(&alu, 0, sizeof(alu));
@@ -1092,7 +1086,7 @@ static int ksz8795_setup(struct dsa_switch *ds)
 	alu.is_override = true;
 	alu.port_forward = dev->host_mask;
 
-	ksz8795_w_sta_mac_table(dev, 0, &alu);
+	ksz8_w_sta_mac_table(dev, 0, &alu);
 
 	ksz_init_mib_timer(dev);
 
@@ -1101,36 +1095,36 @@ static int ksz8795_setup(struct dsa_switch *ds)
 	return 0;
 }
 
-static const struct dsa_switch_ops ksz8795_switch_ops = {
-	.get_tag_protocol	= ksz8795_get_tag_protocol,
-	.setup			= ksz8795_setup,
+static const struct dsa_switch_ops ksz8_switch_ops = {
+	.get_tag_protocol	= ksz8_get_tag_protocol,
+	.setup			= ksz8_setup,
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
 	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_enable		= ksz_enable_port,
-	.get_strings		= ksz8795_get_strings,
+	.get_strings		= ksz8_get_strings,
 	.get_ethtool_stats	= ksz_get_ethtool_stats,
 	.get_sset_count		= ksz_sset_count,
 	.port_bridge_join	= ksz_port_bridge_join,
 	.port_bridge_leave	= ksz_port_bridge_leave,
-	.port_stp_state_set	= ksz8795_port_stp_state_set,
+	.port_stp_state_set	= ksz8_port_stp_state_set,
 	.port_fast_age		= ksz_port_fast_age,
-	.port_vlan_filtering	= ksz8795_port_vlan_filtering,
-	.port_vlan_add		= ksz8795_port_vlan_add,
-	.port_vlan_del		= ksz8795_port_vlan_del,
+	.port_vlan_filtering	= ksz8_port_vlan_filtering,
+	.port_vlan_add		= ksz8_port_vlan_add,
+	.port_vlan_del		= ksz8_port_vlan_del,
 	.port_fdb_dump		= ksz_port_fdb_dump,
 	.port_mdb_add           = ksz_port_mdb_add,
 	.port_mdb_del           = ksz_port_mdb_del,
-	.port_mirror_add	= ksz8795_port_mirror_add,
-	.port_mirror_del	= ksz8795_port_mirror_del,
+	.port_mirror_add	= ksz8_port_mirror_add,
+	.port_mirror_del	= ksz8_port_mirror_del,
 };
 
-static u32 ksz8795_get_port_addr(int port, int offset)
+static u32 ksz8_get_port_addr(int port, int offset)
 {
 	return PORT_CTRL_ADDR(port, offset);
 }
 
-static int ksz8795_switch_detect(struct ksz_device *dev)
+static int ksz8_switch_detect(struct ksz_device *dev)
 {
 	u8 id1, id2;
 	u16 id16;
@@ -1174,7 +1168,7 @@ struct ksz_chip_data {
 	int port_cnt;
 };
 
-static const struct ksz_chip_data ksz8795_switch_chips[] = {
+static const struct ksz_chip_data ksz8_switch_chips[] = {
 	{
 		.chip_id = 0x8795,
 		.dev_name = "KSZ8795",
@@ -1218,14 +1212,14 @@ static const struct ksz_chip_data ksz8795_switch_chips[] = {
 	},
 };
 
-static int ksz8795_switch_init(struct ksz_device *dev)
+static int ksz8_switch_init(struct ksz_device *dev)
 {
 	int i;
 
-	dev->ds->ops = &ksz8795_switch_ops;
+	dev->ds->ops = &ksz8_switch_ops;
 
-	for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) {
-		const struct ksz_chip_data *chip = &ksz8795_switch_chips[i];
+	for (i = 0; i < ARRAY_SIZE(ksz8_switch_chips); i++) {
+		const struct ksz_chip_data *chip = &ksz8_switch_chips[i];
 
 		if (dev->chip_id == chip->chip_id) {
 			dev->name = chip->dev_name;
@@ -1272,36 +1266,36 @@ static int ksz8795_switch_init(struct ksz_device *dev)
 	return 0;
 }
 
-static void ksz8795_switch_exit(struct ksz_device *dev)
+static void ksz8_switch_exit(struct ksz_device *dev)
 {
-	ksz8795_reset_switch(dev);
+	ksz8_reset_switch(dev);
 }
 
-static const struct ksz_dev_ops ksz8795_dev_ops = {
-	.get_port_addr = ksz8795_get_port_addr,
-	.cfg_port_member = ksz8795_cfg_port_member,
-	.flush_dyn_mac_table = ksz8795_flush_dyn_mac_table,
-	.port_setup = ksz8795_port_setup,
-	.r_phy = ksz8795_r_phy,
-	.w_phy = ksz8795_w_phy,
-	.r_dyn_mac_table = ksz8795_r_dyn_mac_table,
-	.r_sta_mac_table = ksz8795_r_sta_mac_table,
-	.w_sta_mac_table = ksz8795_w_sta_mac_table,
-	.r_mib_cnt = ksz8795_r_mib_cnt,
-	.r_mib_pkt = ksz8795_r_mib_pkt,
-	.freeze_mib = ksz8795_freeze_mib,
-	.port_init_cnt = ksz8795_port_init_cnt,
-	.shutdown = ksz8795_reset_switch,
-	.detect = ksz8795_switch_detect,
-	.init = ksz8795_switch_init,
-	.exit = ksz8795_switch_exit,
+static const struct ksz_dev_ops ksz8_dev_ops = {
+	.get_port_addr = ksz8_get_port_addr,
+	.cfg_port_member = ksz8_cfg_port_member,
+	.flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
+	.port_setup = ksz8_port_setup,
+	.r_phy = ksz8_r_phy,
+	.w_phy = ksz8_w_phy,
+	.r_dyn_mac_table = ksz8_r_dyn_mac_table,
+	.r_sta_mac_table = ksz8_r_sta_mac_table,
+	.w_sta_mac_table = ksz8_w_sta_mac_table,
+	.r_mib_cnt = ksz8_r_mib_cnt,
+	.r_mib_pkt = ksz8_r_mib_pkt,
+	.freeze_mib = ksz8_freeze_mib,
+	.port_init_cnt = ksz8_port_init_cnt,
+	.shutdown = ksz8_reset_switch,
+	.detect = ksz8_switch_detect,
+	.init = ksz8_switch_init,
+	.exit = ksz8_switch_exit,
 };
 
-int ksz8795_switch_register(struct ksz_device *dev)
+int ksz8_switch_register(struct ksz_device *dev)
 {
-	return ksz_switch_register(dev, &ksz8795_dev_ops);
+	return ksz_switch_register(dev, &ksz8_dev_ops);
 }
-EXPORT_SYMBOL(ksz8795_switch_register);
+EXPORT_SYMBOL(ksz8_switch_register);
 
 MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
 MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index f98432a3e2b5..45420c07c99f 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -55,7 +55,7 @@ static int ksz8795_spi_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = ksz8795_switch_register(dev);
+	ret = ksz8_switch_register(dev);
 
 	/* Main DSA driver may not be started yet. */
 	if (ret)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f212775372ce..f0681a891cca 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -142,7 +142,7 @@ int ksz_switch_register(struct ksz_device *dev,
 			const struct ksz_dev_ops *ops);
 void ksz_switch_remove(struct ksz_device *dev);
 
-int ksz8795_switch_register(struct ksz_device *dev);
+int ksz8_switch_register(struct ksz_device *dev);
 int ksz9477_switch_register(struct ksz_device *dev);
 
 void ksz_update_port_member(struct ksz_device *dev, int port);
-- 
2.29.2

[PATCH net-next v8 2/9] net: dsa: microchip: ksz8795: move cpu_select_interface to extra function

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch moves the cpu interface selection code to a individual
function specific for ksz8795. It will make it simpler to customize the
code path for different switches supported by this driver.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

---
v1 -> v5: - extracted this from previous bigger patch
---
 drivers/net/dsa/microchip/ksz8795.c | 92 ++++++++++++++++-------------
 1 file changed, 50 insertions(+), 42 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 91297df4371c..85fb727c13eb 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -909,10 +909,58 @@ static void ksz8_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
+static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+	u8 data8;
+
+	if (!p->interface && dev->compat_interface) {
+		dev_warn(dev->dev,
+			 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+			 "Please update your device tree.\n",
+			 port);
+		p->interface = dev->compat_interface;
+	}
+
+	/* Configure MII interface for proper network communication. */
+	ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+	data8 &= ~PORT_INTERFACE_TYPE;
+	data8 &= ~PORT_GMII_1GPS_MODE;
+	switch (p->interface) {
+	case PHY_INTERFACE_MODE_MII:
+		p->phydev.speed = SPEED_100;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		data8 |= PORT_INTERFACE_RMII;
+		p->phydev.speed = SPEED_100;
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		data8 |= PORT_GMII_1GPS_MODE;
+		data8 |= PORT_INTERFACE_GMII;
+		p->phydev.speed = SPEED_1000;
+		break;
+	default:
+		data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+		data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			data8 |= PORT_RGMII_ID_IN_ENABLE;
+		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			data8 |= PORT_RGMII_ID_OUT_ENABLE;
+		data8 |= PORT_GMII_1GPS_MODE;
+		data8 |= PORT_INTERFACE_RGMII;
+		p->phydev.speed = SPEED_1000;
+		break;
+	}
+	ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+	p->phydev.duplex = 1;
+}
+
 static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct ksz_port *p = &dev->ports[port];
-	u8 data8, member;
+	u8 member;
 
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
@@ -929,47 +977,7 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
 
 	if (cpu_port) {
-		if (!p->interface && dev->compat_interface) {
-			dev_warn(dev->dev,
-				 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
-				 "Please update your device tree.\n",
-				 port);
-			p->interface = dev->compat_interface;
-		}
-
-		/* Configure MII interface for proper network communication. */
-		ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
-		data8 &= ~PORT_INTERFACE_TYPE;
-		data8 &= ~PORT_GMII_1GPS_MODE;
-		switch (p->interface) {
-		case PHY_INTERFACE_MODE_MII:
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_RMII:
-			data8 |= PORT_INTERFACE_RMII;
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_GMII:
-			data8 |= PORT_GMII_1GPS_MODE;
-			data8 |= PORT_INTERFACE_GMII;
-			p->phydev.speed = SPEED_1000;
-			break;
-		default:
-			data8 &= ~PORT_RGMII_ID_IN_ENABLE;
-			data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-				data8 |= PORT_RGMII_ID_IN_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-				data8 |= PORT_RGMII_ID_OUT_ENABLE;
-			data8 |= PORT_GMII_1GPS_MODE;
-			data8 |= PORT_INTERFACE_RGMII;
-			p->phydev.speed = SPEED_1000;
-			break;
-		}
-		ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
-		p->phydev.duplex = 1;
+		ksz8795_cpu_interface_select(dev, port);
 
 		member = dev->port_mask;
 	} else {
-- 
2.29.2

[PATCH net-next v8 3/9] net: dsa: microchip: ksz8795: move register offsets and shifts to separate struct

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

In order to get this driver used with other switches the functions need
to use different offsets and register shifts. This patch changes the
direct use of the register defines to register description structures,
which can be set depending on the chips register layout.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---
v1 -> v4: - extracted this change from bigger previous patch
v4 -> v5: - added missing variables in ksz8_r_vlan_entries
          - moved shifts, masks and registers to arrays indexed by enums
	  - using unsigned types where possible
v5 -> v6: - changed variable order to revers christmas tree
          - fixed shift entry VLAN_TABLE_MEMBERSHIP to VLAN_TABLE_MEMBERSHIP_S
---
 drivers/net/dsa/microchip/ksz8.h        |  69 ++++++
 drivers/net/dsa/microchip/ksz8795.c     | 287 +++++++++++++++++-------
 drivers/net/dsa/microchip/ksz8795_reg.h |  85 -------
 3 files changed, 281 insertions(+), 160 deletions(-)
 create mode 100644 drivers/net/dsa/microchip/ksz8.h

diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
new file mode 100644
index 000000000000..9d611895d3cf
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Microchip KSZ8XXX series register access
+ *
+ * Copyright (C) 2020 Pengutronix, Michael Grzeschik <kernel@pengutronix.de>
+ */
+
+#ifndef __KSZ8XXX_H
+#define __KSZ8XXX_H
+#include <linux/kernel.h>
+
+enum ksz_regs {
+	REG_IND_CTRL_0,
+	REG_IND_DATA_8,
+	REG_IND_DATA_CHECK,
+	REG_IND_DATA_HI,
+	REG_IND_DATA_LO,
+	REG_IND_MIB_CHECK,
+	P_FORCE_CTRL,
+	P_LINK_STATUS,
+	P_LOCAL_CTRL,
+	P_NEG_RESTART_CTRL,
+	P_REMOTE_STATUS,
+	P_SPEED_STATUS,
+	S_TAIL_TAG_CTRL,
+};
+
+enum ksz_masks {
+	PORT_802_1P_REMAPPING,
+	SW_TAIL_TAG_ENABLE,
+	MIB_COUNTER_OVERFLOW,
+	MIB_COUNTER_VALID,
+	VLAN_TABLE_FID,
+	VLAN_TABLE_MEMBERSHIP,
+	VLAN_TABLE_VALID,
+	STATIC_MAC_TABLE_VALID,
+	STATIC_MAC_TABLE_USE_FID,
+	STATIC_MAC_TABLE_FID,
+	STATIC_MAC_TABLE_OVERRIDE,
+	STATIC_MAC_TABLE_FWD_PORTS,
+	DYNAMIC_MAC_TABLE_ENTRIES_H,
+	DYNAMIC_MAC_TABLE_MAC_EMPTY,
+	DYNAMIC_MAC_TABLE_NOT_READY,
+	DYNAMIC_MAC_TABLE_ENTRIES,
+	DYNAMIC_MAC_TABLE_FID,
+	DYNAMIC_MAC_TABLE_SRC_PORT,
+	DYNAMIC_MAC_TABLE_TIMESTAMP,
+};
+
+enum ksz_shifts {
+	VLAN_TABLE_MEMBERSHIP_S,
+	VLAN_TABLE,
+	STATIC_MAC_FWD_PORTS,
+	STATIC_MAC_FID,
+	DYNAMIC_MAC_ENTRIES_H,
+	DYNAMIC_MAC_ENTRIES,
+	DYNAMIC_MAC_FID,
+	DYNAMIC_MAC_TIMESTAMP,
+	DYNAMIC_MAC_SRC_PORT,
+};
+
+struct ksz8 {
+	const u8 *regs;
+	const u32 *masks;
+	const u8 *shifts;
+	void *priv;
+};
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 85fb727c13eb..75518b4a253d 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -20,6 +20,57 @@
 
 #include "ksz_common.h"
 #include "ksz8795_reg.h"
+#include "ksz8.h"
+
+static const u8 ksz8795_regs[] = {
+	[REG_IND_CTRL_0]		= 0x6E,
+	[REG_IND_DATA_8]		= 0x70,
+	[REG_IND_DATA_CHECK]		= 0x72,
+	[REG_IND_DATA_HI]		= 0x71,
+	[REG_IND_DATA_LO]		= 0x75,
+	[REG_IND_MIB_CHECK]		= 0x74,
+	[P_FORCE_CTRL]			= 0x0C,
+	[P_LINK_STATUS]			= 0x0E,
+	[P_LOCAL_CTRL]			= 0x07,
+	[P_NEG_RESTART_CTRL]		= 0x0D,
+	[P_REMOTE_STATUS]		= 0x08,
+	[P_SPEED_STATUS]		= 0x09,
+	[S_TAIL_TAG_CTRL]		= 0x0C,
+};
+
+static const u32 ksz8795_masks[] = {
+	[PORT_802_1P_REMAPPING]		= BIT(7),
+	[SW_TAIL_TAG_ENABLE]		= BIT(1),
+	[MIB_COUNTER_OVERFLOW]		= BIT(6),
+	[MIB_COUNTER_VALID]		= BIT(5),
+	[VLAN_TABLE_FID]		= GENMASK(6, 0),
+	[VLAN_TABLE_MEMBERSHIP]		= GENMASK(11, 7),
+	[VLAN_TABLE_VALID]		= BIT(12),
+	[STATIC_MAC_TABLE_VALID]	= BIT(21),
+	[STATIC_MAC_TABLE_USE_FID]	= BIT(23),
+	[STATIC_MAC_TABLE_FID]		= GENMASK(30, 24),
+	[STATIC_MAC_TABLE_OVERRIDE]	= BIT(26),
+	[STATIC_MAC_TABLE_FWD_PORTS]	= GENMASK(24, 20),
+	[DYNAMIC_MAC_TABLE_ENTRIES_H]	= GENMASK(6, 0),
+	[DYNAMIC_MAC_TABLE_MAC_EMPTY]	= BIT(8),
+	[DYNAMIC_MAC_TABLE_NOT_READY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_ENTRIES]	= GENMASK(31, 29),
+	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(26, 20),
+	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(26, 24),
+	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(28, 27),
+};
+
+static const u8 ksz8795_shifts[] = {
+	[VLAN_TABLE_MEMBERSHIP_S]	= 7,
+	[VLAN_TABLE]			= 16,
+	[STATIC_MAC_FWD_PORTS]		= 16,
+	[STATIC_MAC_FID]		= 24,
+	[DYNAMIC_MAC_ENTRIES_H]		= 3,
+	[DYNAMIC_MAC_ENTRIES]		= 29,
+	[DYNAMIC_MAC_FID]		= 16,
+	[DYNAMIC_MAC_TIMESTAMP]		= 27,
+	[DYNAMIC_MAC_SRC_PORT]		= 24,
+};
 
 static const struct {
 	char string[ETH_GSTRING_LEN];
@@ -119,26 +170,32 @@ static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
 
 static void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u32 *masks;
+	const u8 *regs;
 	u16 ctrl_addr;
 	u32 data;
 	u8 check;
 	int loop;
 
+	masks = ksz8->masks;
+	regs = ksz8->regs;
+
 	ctrl_addr = addr + dev->reg_mib_cnt * port;
 	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 
 	/* It is almost guaranteed to always read the valid bit because of
 	 * slow SPI speed.
 	 */
 	for (loop = 2; loop > 0; loop--) {
-		ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
 
-		if (check & MIB_COUNTER_VALID) {
-			ksz_read32(dev, REG_IND_DATA_LO, &data);
-			if (check & MIB_COUNTER_OVERFLOW)
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+			if (check & masks[MIB_COUNTER_OVERFLOW])
 				*cnt += MIB_COUNTER_VALUE + 1;
 			*cnt += data & MIB_COUNTER_VALUE;
 			break;
@@ -150,27 +207,33 @@ static void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
 static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 			   u64 *dropped, u64 *cnt)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u32 *masks;
+	const u8 *regs;
 	u16 ctrl_addr;
 	u32 data;
 	u8 check;
 	int loop;
 
+	masks = ksz8->masks;
+	regs = ksz8->regs;
+
 	addr -= dev->reg_mib_cnt;
 	ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
 	ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
 	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 
 	/* It is almost guaranteed to always read the valid bit because of
 	 * slow SPI speed.
 	 */
 	for (loop = 2; loop > 0; loop--) {
-		ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
 
-		if (check & MIB_COUNTER_VALID) {
-			ksz_read32(dev, REG_IND_DATA_LO, &data);
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
 			if (addr < 2) {
 				u64 total;
 
@@ -178,13 +241,13 @@ static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 				total <<= 32;
 				*cnt += total;
 				*cnt += data;
-				if (check & MIB_COUNTER_OVERFLOW) {
+				if (check & masks[MIB_COUNTER_OVERFLOW]) {
 					total = MIB_TOTAL_BYTES_H + 1;
 					total <<= 32;
 					*cnt += total;
 				}
 			} else {
-				if (check & MIB_COUNTER_OVERFLOW)
+				if (check & masks[MIB_COUNTER_OVERFLOW])
 					*cnt += MIB_PACKET_DROPPED + 1;
 				*cnt += data & MIB_PACKET_DROPPED;
 			}
@@ -236,46 +299,56 @@ static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
 
 static void ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *regs = ksz8->regs;
 	u16 ctrl_addr;
 
 	ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
-	ksz_read64(dev, REG_IND_DATA_HI, data);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ksz_read64(dev, regs[REG_IND_DATA_HI], data);
 	mutex_unlock(&dev->alu_mutex);
 }
 
 static void ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *regs = ksz8->regs;
 	u16 ctrl_addr;
 
 	ctrl_addr = IND_ACC_TABLE(table) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write64(dev, REG_IND_DATA_HI, data);
-	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+	ksz_write64(dev, regs[REG_IND_DATA_HI], data);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 	mutex_unlock(&dev->alu_mutex);
 }
 
 static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	int timeout = 100;
+	const u32 *masks;
+	const u8 *regs;
+
+	masks = ksz8->masks;
+	regs = ksz8->regs;
 
 	do {
-		ksz_read8(dev, REG_IND_DATA_CHECK, data);
+		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
 		timeout--;
-	} while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
+	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
 
 	/* Entry is not ready for accessing. */
-	if (*data & DYNAMIC_MAC_TABLE_NOT_READY) {
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
 		return -EAGAIN;
 	/* Entry is ready for accessing. */
 	} else {
-		ksz_read8(dev, REG_IND_DATA_8, data);
+		ksz_read8(dev, regs[REG_IND_DATA_8], data);
 
 		/* There is no valid entry in the table. */
-		if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
+		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
 			return -ENXIO;
 	}
 	return 0;
@@ -285,15 +358,23 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
 				u8 *mac_addr, u8 *fid, u8 *src_port,
 				u8 *timestamp, u16 *entries)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	const u8 *regs;
 	u16 ctrl_addr;
 	u8 data;
 	int rc;
 
+	shifts = ksz8->shifts;
+	masks = ksz8->masks;
+	regs = ksz8->regs;
+
 	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
 
 	rc = ksz8_valid_dyn_entry(dev, &data);
 	if (rc == -EAGAIN) {
@@ -306,23 +387,23 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
 		u64 buf = 0;
 		int cnt;
 
-		ksz_read64(dev, REG_IND_DATA_HI, &buf);
+		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
 		data_hi = (u32)(buf >> 32);
 		data_lo = (u32)buf;
 
 		/* Check out how many valid entry in the table. */
-		cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H;
-		cnt <<= DYNAMIC_MAC_ENTRIES_H_S;
-		cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
-			DYNAMIC_MAC_ENTRIES_S;
+		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+			shifts[DYNAMIC_MAC_ENTRIES];
 		*entries = cnt + 1;
 
-		*fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >>
-			DYNAMIC_MAC_FID_S;
-		*src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
-			DYNAMIC_MAC_SRC_PORT_S;
-		*timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
-			DYNAMIC_MAC_TIMESTAMP_S;
+		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+			shifts[DYNAMIC_MAC_FID];
+		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+			shifts[DYNAMIC_MAC_SRC_PORT];
+		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
+			shifts[DYNAMIC_MAC_TIMESTAMP];
 
 		mac_addr[5] = (u8)data_lo;
 		mac_addr[4] = (u8)(data_lo >> 8);
@@ -341,27 +422,37 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
 static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
 				struct alu_struct *alu)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
 	u64 data;
 
+	shifts = ksz8->shifts;
+	masks = ksz8->masks;
+
 	ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data);
 	data_hi = data >> 32;
 	data_lo = (u32)data;
-	if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
+	if (data_hi & (masks[STATIC_MAC_TABLE_VALID] |
+			masks[STATIC_MAC_TABLE_OVERRIDE])) {
 		alu->mac[5] = (u8)data_lo;
 		alu->mac[4] = (u8)(data_lo >> 8);
 		alu->mac[3] = (u8)(data_lo >> 16);
 		alu->mac[2] = (u8)(data_lo >> 24);
 		alu->mac[1] = (u8)data_hi;
 		alu->mac[0] = (u8)(data_hi >> 8);
-		alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
-			STATIC_MAC_FWD_PORTS_S;
+		alu->port_forward =
+			(data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >>
+				shifts[STATIC_MAC_FWD_PORTS];
 		alu->is_override =
-			(data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
+			(data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0;
 		data_hi >>= 1;
-		alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
-		alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >>
-			STATIC_MAC_FID_S;
+		alu->is_static = true;
+		alu->is_use_fid =
+			(data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0;
+		alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >>
+				shifts[STATIC_MAC_FID];
 		return 0;
 	}
 	return -ENXIO;
@@ -370,55 +461,82 @@ static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
 static void ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr,
 				 struct alu_struct *alu)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
 	u64 data;
 
+	shifts = ksz8->shifts;
+	masks = ksz8->masks;
+
 	data_lo = ((u32)alu->mac[2] << 24) |
 		((u32)alu->mac[3] << 16) |
 		((u32)alu->mac[4] << 8) | alu->mac[5];
 	data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
-	data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S;
+	data_hi |= (u32)alu->port_forward << shifts[STATIC_MAC_FWD_PORTS];
 
 	if (alu->is_override)
-		data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+		data_hi |= masks[STATIC_MAC_TABLE_OVERRIDE];
 	if (alu->is_use_fid) {
-		data_hi |= STATIC_MAC_TABLE_USE_FID;
-		data_hi |= (u32)alu->fid << STATIC_MAC_FID_S;
+		data_hi |= masks[STATIC_MAC_TABLE_USE_FID];
+		data_hi |= (u32)alu->fid << shifts[STATIC_MAC_FID];
 	}
 	if (alu->is_static)
-		data_hi |= STATIC_MAC_TABLE_VALID;
+		data_hi |= masks[STATIC_MAC_TABLE_VALID];
 	else
-		data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
+		data_hi &= ~masks[STATIC_MAC_TABLE_OVERRIDE];
 
 	data = (u64)data_hi << 32 | data_lo;
 	ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data);
 }
 
-static void ksz8_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
+static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid,
+			   u8 *member, u8 *valid)
 {
-	*fid = vlan & VLAN_TABLE_FID;
-	*member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
-	*valid = !!(vlan & VLAN_TABLE_VALID);
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = ksz8->shifts;
+	masks = ksz8->masks;
+
+	*fid = vlan & masks[VLAN_TABLE_FID];
+	*member = (vlan & masks[VLAN_TABLE_MEMBERSHIP]) >>
+			shifts[VLAN_TABLE_MEMBERSHIP_S];
+	*valid = !!(vlan & masks[VLAN_TABLE_VALID]);
 }
 
-static void ksz8_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
+static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid,
+			 u16 *vlan)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = ksz8->shifts;
+	masks = ksz8->masks;
+
 	*vlan = fid;
-	*vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
+	*vlan |= (u16)member << shifts[VLAN_TABLE_MEMBERSHIP_S];
 	if (valid)
-		*vlan |= VLAN_TABLE_VALID;
+		*vlan |= masks[VLAN_TABLE_VALID];
 }
 
 static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
 {
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *shifts;
 	u64 data;
 	int i;
 
+	shifts = ksz8->shifts;
+
 	ksz8_r_table(dev, TABLE_VLAN, addr, &data);
 	addr *= dev->phy_port_cnt;
 	for (i = 0; i < dev->phy_port_cnt; i++) {
 		dev->vlan_cache[addr + i].table[0] = (u16)data;
-		data >>= VLAN_TABLE_S;
+		data >>= shifts[VLAN_TABLE];
 	}
 }
 
@@ -454,16 +572,18 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
 
 static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	u8 restart, speed, ctrl, link;
+	const u8 *regs = ksz8->regs;
 	int processed = true;
 	u16 data = 0;
 	u8 p = phy;
 
 	switch (reg) {
 	case PHY_REG_CTRL:
-		ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
-		ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
-		ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+		ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+		ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
 		if (restart & PORT_PHY_LOOPBACK)
 			data |= PHY_LOOPBACK;
 		if (ctrl & PORT_FORCE_100_MBIT)
@@ -488,7 +608,7 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 			data |= PHY_LED_DISABLE;
 		break;
 	case PHY_REG_STATUS:
-		ksz_pread8(dev, p, P_LINK_STATUS, &link);
+		ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
 		data = PHY_100BTX_FD_CAPABLE |
 		       PHY_100BTX_CAPABLE |
 		       PHY_10BT_FD_CAPABLE |
@@ -506,7 +626,7 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 		data = KSZ8795_ID_LO;
 		break;
 	case PHY_REG_AUTO_NEGOTIATION:
-		ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+		ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
 		data = PHY_AUTO_NEG_802_3;
 		if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
 			data |= PHY_AUTO_NEG_SYM_PAUSE;
@@ -520,7 +640,7 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 			data |= PHY_AUTO_NEG_10BT;
 		break;
 	case PHY_REG_REMOTE_CAPABILITY:
-		ksz_pread8(dev, p, P_REMOTE_STATUS, &link);
+		ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
 		data = PHY_AUTO_NEG_802_3;
 		if (link & PORT_REMOTE_SYM_PAUSE)
 			data |= PHY_AUTO_NEG_SYM_PAUSE;
@@ -545,8 +665,10 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 
 static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 {
-	u8 p = phy;
+	struct ksz8 *ksz8 = dev->priv;
 	u8 restart, speed, ctrl, data;
+	const u8 *regs = ksz8->regs;
+	u8 p = phy;
 
 	switch (reg) {
 	case PHY_REG_CTRL:
@@ -554,15 +676,15 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 		/* Do not support PHY reset function. */
 		if (val & PHY_RESET)
 			break;
-		ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+		ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
 		data = speed;
 		if (val & PHY_HP_MDIX)
 			data |= PORT_HP_MDIX;
 		else
 			data &= ~PORT_HP_MDIX;
 		if (data != speed)
-			ksz_pwrite8(dev, p, P_SPEED_STATUS, data);
-		ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+			ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
+		ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
 		data = ctrl;
 		if (!(val & PHY_AUTO_NEG_ENABLE))
 			data |= PORT_AUTO_NEG_DISABLE;
@@ -581,8 +703,8 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 		else
 			data &= ~PORT_FORCE_FULL_DUPLEX;
 		if (data != ctrl)
-			ksz_pwrite8(dev, p, P_FORCE_CTRL, data);
-		ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+			ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
+		ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
 		data = restart;
 		if (val & PHY_LED_DISABLE)
 			data |= PORT_LED_OFF;
@@ -613,10 +735,10 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 		else
 			data &= ~PORT_PHY_LOOPBACK;
 		if (data != restart)
-			ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data);
+			ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], data);
 		break;
 	case PHY_REG_AUTO_NEGOTIATION:
-		ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+		ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
 		data = ctrl;
 		data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
 			  PORT_AUTO_NEG_100BTX_FD |
@@ -634,7 +756,7 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 		if (val & PHY_AUTO_NEG_10BT)
 			data |= PORT_AUTO_NEG_10BT;
 		if (data != ctrl)
-			ksz_pwrite8(dev, p, P_LOCAL_CTRL, data);
+			ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
 		break;
 	default:
 		break;
@@ -799,7 +921,7 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
 
 	ksz8_r_vlan_table(dev, vlan->vid, &data);
-	ksz8_from_vlan(data, &fid, &member, &valid);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
 
 	/* First time to setup the VLAN entry. */
 	if (!valid) {
@@ -809,7 +931,7 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
 	}
 	member |= BIT(port);
 
-	ksz8_to_vlan(fid, member, valid, &data);
+	ksz8_to_vlan(dev, fid, member, valid, &data);
 	ksz8_w_vlan_table(dev, vlan->vid, data);
 
 	/* change PVID */
@@ -842,7 +964,7 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
 
 	ksz8_r_vlan_table(dev, vlan->vid, &data);
-	ksz8_from_vlan(data, &fid, &member, &valid);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
 
 	member &= ~BIT(port);
 
@@ -855,7 +977,7 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
 	if (pvid == vlan->vid)
 		new_pvid = 1;
 
-	ksz8_to_vlan(fid, member, valid, &data);
+	ksz8_to_vlan(dev, fid, member, valid, &data);
 	ksz8_w_vlan_table(dev, vlan->vid, data);
 
 	if (new_pvid != pvid)
@@ -960,8 +1082,12 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
 static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct ksz_port *p = &dev->ports[port];
+	struct ksz8 *ksz8 = dev->priv;
+	const u32 *masks;
 	u8 member;
 
+	masks = ksz8->masks;
+
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
@@ -971,7 +1097,8 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
 
 	/* replace priority */
-	ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false);
+	ksz_port_cfg(dev, port, P_802_1P_CTRL,
+		     masks[PORT_802_1P_REMAPPING], false);
 
 	/* enable 802.1p priority */
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
@@ -989,13 +1116,18 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 static void ksz8_config_cpu_port(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *regs = ksz8->regs;
 	struct ksz_port *p;
+	const u32 *masks;
 	u8 remote;
 	int i;
 
+	masks = ksz8->masks;
+
 	/* Switch marks the maximum frame with extra byte as oversize. */
 	ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
-	ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true);
+	ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
 
 	p = &dev->ports[dev->cpu_port];
 	p->vid_member = dev->port_mask;
@@ -1024,7 +1156,7 @@ static void ksz8_config_cpu_port(struct dsa_switch *ds)
 		p = &dev->ports[i];
 		if (!p->on)
 			continue;
-		ksz_pread8(dev, i, P_REMOTE_STATUS, &remote);
+		ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
 		if (remote & PORT_FIBER_MODE)
 			p->fiber = 1;
 		if (p->fiber)
@@ -1222,6 +1354,7 @@ static const struct ksz_chip_data ksz8_switch_chips[] = {
 
 static int ksz8_switch_init(struct ksz_device *dev)
 {
+	struct ksz8 *ksz8 = dev->priv;
 	int i;
 
 	dev->ds->ops = &ksz8_switch_ops;
@@ -1249,6 +1382,10 @@ static int ksz8_switch_init(struct ksz_device *dev)
 	if (!dev->cpu_ports)
 		return -ENODEV;
 
+	ksz8->regs = ksz8795_regs;
+	ksz8->masks = ksz8795_masks;
+	ksz8->shifts = ksz8795_shifts;
+
 	dev->reg_mib_cnt = KSZ8795_COUNTER_NUM;
 	dev->mib_cnt = ARRAY_SIZE(mib_names);
 
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 40372047d40d..eea78c5636a0 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -98,7 +98,6 @@
 
 #define REG_SW_CTRL_10			0x0C
 
-#define SW_TAIL_TAG_ENABLE		BIT(1)
 #define SW_PASS_PAUSE			BIT(0)
 
 #define REG_SW_CTRL_11			0x0D
@@ -150,7 +149,6 @@
 #define REG_PORT_4_CTRL_2		0x42
 #define REG_PORT_5_CTRL_2		0x52
 
-#define PORT_802_1P_REMAPPING		BIT(7)
 #define PORT_INGRESS_FILTER		BIT(6)
 #define PORT_DISCARD_NON_VID		BIT(5)
 #define PORT_FORCE_FLOW_CTRL		BIT(4)
@@ -319,14 +317,12 @@
 
 #define REG_PORT_CTRL_5			0x05
 
-#define REG_PORT_CTRL_7			0x07
 #define REG_PORT_STATUS_0		0x08
 #define REG_PORT_STATUS_1		0x09
 #define REG_PORT_LINK_MD_CTRL		0x0A
 #define REG_PORT_LINK_MD_RESULT		0x0B
 #define REG_PORT_CTRL_9			0x0C
 #define REG_PORT_CTRL_10		0x0D
-#define REG_PORT_STATUS_2		0x0E
 #define REG_PORT_STATUS_3		0x0F
 
 #define REG_PORT_CTRL_12		0xA0
@@ -356,8 +352,6 @@
 #define REG_SW_MAC_ADDR_4		0x6C
 #define REG_SW_MAC_ADDR_5		0x6D
 
-#define REG_IND_CTRL_0			0x6E
-
 #define TABLE_EXT_SELECT_S		5
 #define TABLE_EEE_V			1
 #define TABLE_ACL_V			2
@@ -383,23 +377,13 @@
 #define TABLE_ENTRY_MASK		0x03FF
 #define TABLE_EXT_ENTRY_MASK		0x0FFF
 
-#define REG_IND_DATA_8			0x70
-#define REG_IND_DATA_7			0x71
-#define REG_IND_DATA_6			0x72
 #define REG_IND_DATA_5			0x73
-#define REG_IND_DATA_4			0x74
-#define REG_IND_DATA_3			0x75
 #define REG_IND_DATA_2			0x76
 #define REG_IND_DATA_1			0x77
 #define REG_IND_DATA_0			0x78
 
 #define REG_IND_DATA_PME_EEE_ACL	0xA0
 
-#define REG_IND_DATA_CHECK		REG_IND_DATA_6
-#define REG_IND_MIB_CHECK		REG_IND_DATA_4
-#define REG_IND_DATA_HI			REG_IND_DATA_7
-#define REG_IND_DATA_LO			REG_IND_DATA_3
-
 #define REG_INT_STATUS			0x7C
 #define REG_INT_ENABLE			0x7D
 
@@ -856,12 +840,6 @@
 #define P_MIRROR_CTRL			REG_PORT_CTRL_1
 #define P_802_1P_CTRL			REG_PORT_CTRL_2
 #define P_STP_CTRL			REG_PORT_CTRL_2
-#define P_LOCAL_CTRL			REG_PORT_CTRL_7
-#define P_REMOTE_STATUS			REG_PORT_STATUS_0
-#define P_FORCE_CTRL			REG_PORT_CTRL_9
-#define P_NEG_RESTART_CTRL		REG_PORT_CTRL_10
-#define P_SPEED_STATUS			REG_PORT_STATUS_1
-#define P_LINK_STATUS			REG_PORT_STATUS_2
 #define P_PASS_ALL_CTRL			REG_PORT_CTRL_12
 #define P_INS_SRC_PVID_CTRL		REG_PORT_CTRL_12
 #define P_DROP_TAG_CTRL			REG_PORT_CTRL_13
@@ -876,7 +854,6 @@
 #define S_MIRROR_CTRL			REG_SW_CTRL_3
 #define S_REPLACE_VID_CTRL		REG_SW_CTRL_4
 #define S_PASS_PAUSE_CTRL		REG_SW_CTRL_10
-#define S_TAIL_TAG_CTRL			REG_SW_CTRL_10
 #define S_802_1P_PRIO_CTRL		REG_SW_CTRL_12
 #define S_TOS_PRIO_CTRL			REG_TOS_PRIO_CTRL_0
 #define S_IPV6_MLD_CTRL			REG_SW_CTRL_21
@@ -889,65 +866,6 @@
 /* 148,800 frames * 67 ms / 100 */
 #define BROADCAST_STORM_VALUE		9969
 
-/**
- * STATIC_MAC_TABLE_ADDR		00-0000FFFF-FFFFFFFF
- * STATIC_MAC_TABLE_FWD_PORTS		00-001F0000-00000000
- * STATIC_MAC_TABLE_VALID		00-00200000-00000000
- * STATIC_MAC_TABLE_OVERRIDE		00-00400000-00000000
- * STATIC_MAC_TABLE_USE_FID		00-00800000-00000000
- * STATIC_MAC_TABLE_FID			00-7F000000-00000000
- */
-
-#define STATIC_MAC_TABLE_ADDR		0x0000FFFF
-#define STATIC_MAC_TABLE_FWD_PORTS	0x001F0000
-#define STATIC_MAC_TABLE_VALID		0x00200000
-#define STATIC_MAC_TABLE_OVERRIDE	0x00400000
-#define STATIC_MAC_TABLE_USE_FID	0x00800000
-#define STATIC_MAC_TABLE_FID		0x7F000000
-
-#define STATIC_MAC_FWD_PORTS_S		16
-#define STATIC_MAC_FID_S		24
-
-/**
- * VLAN_TABLE_FID			00-007F007F-007F007F
- * VLAN_TABLE_MEMBERSHIP		00-0F800F80-0F800F80
- * VLAN_TABLE_VALID			00-10001000-10001000
- */
-
-#define VLAN_TABLE_FID			0x007F
-#define VLAN_TABLE_MEMBERSHIP		0x0F80
-#define VLAN_TABLE_VALID		0x1000
-
-#define VLAN_TABLE_MEMBERSHIP_S		7
-#define VLAN_TABLE_S			16
-
-/**
- * DYNAMIC_MAC_TABLE_ADDR		00-0000FFFF-FFFFFFFF
- * DYNAMIC_MAC_TABLE_FID		00-007F0000-00000000
- * DYNAMIC_MAC_TABLE_NOT_READY		00-00800000-00000000
- * DYNAMIC_MAC_TABLE_SRC_PORT		00-07000000-00000000
- * DYNAMIC_MAC_TABLE_TIMESTAMP		00-18000000-00000000
- * DYNAMIC_MAC_TABLE_ENTRIES		7F-E0000000-00000000
- * DYNAMIC_MAC_TABLE_MAC_EMPTY		80-00000000-00000000
- */
-
-#define DYNAMIC_MAC_TABLE_ADDR		0x0000FFFF
-#define DYNAMIC_MAC_TABLE_FID		0x007F0000
-#define DYNAMIC_MAC_TABLE_SRC_PORT	0x07000000
-#define DYNAMIC_MAC_TABLE_TIMESTAMP	0x18000000
-#define DYNAMIC_MAC_TABLE_ENTRIES	0xE0000000
-
-#define DYNAMIC_MAC_TABLE_NOT_READY	0x80
-
-#define DYNAMIC_MAC_TABLE_ENTRIES_H	0x7F
-#define DYNAMIC_MAC_TABLE_MAC_EMPTY	0x80
-
-#define DYNAMIC_MAC_FID_S		16
-#define DYNAMIC_MAC_SRC_PORT_S		24
-#define DYNAMIC_MAC_TIMESTAMP_S		27
-#define DYNAMIC_MAC_ENTRIES_S		29
-#define DYNAMIC_MAC_ENTRIES_H_S		3
-
 /**
  * MIB_COUNTER_VALUE			00-00000000-3FFFFFFF
  * MIB_TOTAL_BYTES			00-0000000F-FFFFFFFF
@@ -956,9 +874,6 @@
  * MIB_COUNTER_OVERFLOW			00-00000040-00000000
  */
 
-#define MIB_COUNTER_OVERFLOW		BIT(6)
-#define MIB_COUNTER_VALID		BIT(5)
-
 #define MIB_COUNTER_VALUE		0x3FFFFFFF
 
 #define KS_MIB_TOTAL_RX_0		0x100
-- 
2.29.2

[PATCH net-next v8 4/9] net: dsa: microchip: ksz8795: add support for ksz88xx chips

[Oleksij Rempel]

We add support for the ksz8863 and ksz8873 chips which are
using the same register patterns but other offsets as the
ksz8795.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

---
v1 -> v4: - extracted this change from bigger previous patch
v4 -> v5: - added clear of reset bit for ksz8863 reset code
          - using extra device flag IS_KSZ88x3 instead of is_ksz8795 function
          - using DSA_TAG_PROTO_KSZ9893 protocol for ksz88x3 instead
v5 -> v6: - changed variable order to revers christmas tree
	  - added back missed dropped handling in init_cnt for ksz8863
          - disable VLAN support for ksz8863. Currently it need more
            work.
---
 drivers/net/dsa/microchip/ksz8795.c     | 311 ++++++++++++++++++++----
 drivers/net/dsa/microchip/ksz8795_reg.h |  40 ++-
 drivers/net/dsa/microchip/ksz_common.h  |   1 +
 3 files changed, 281 insertions(+), 71 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 75518b4a253d..ad509a57a945 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -72,9 +72,60 @@ static const u8 ksz8795_shifts[] = {
 	[DYNAMIC_MAC_SRC_PORT]		= 24,
 };
 
-static const struct {
+static const u8 ksz8863_regs[] = {
+	[REG_IND_CTRL_0]		= 0x79,
+	[REG_IND_DATA_8]		= 0x7B,
+	[REG_IND_DATA_CHECK]		= 0x7B,
+	[REG_IND_DATA_HI]		= 0x7C,
+	[REG_IND_DATA_LO]		= 0x80,
+	[REG_IND_MIB_CHECK]		= 0x80,
+	[P_FORCE_CTRL]			= 0x0C,
+	[P_LINK_STATUS]			= 0x0E,
+	[P_LOCAL_CTRL]			= 0x0C,
+	[P_NEG_RESTART_CTRL]		= 0x0D,
+	[P_REMOTE_STATUS]		= 0x0E,
+	[P_SPEED_STATUS]		= 0x0F,
+	[S_TAIL_TAG_CTRL]		= 0x03,
+};
+
+static const u32 ksz8863_masks[] = {
+	[PORT_802_1P_REMAPPING]		= BIT(3),
+	[SW_TAIL_TAG_ENABLE]		= BIT(6),
+	[MIB_COUNTER_OVERFLOW]		= BIT(7),
+	[MIB_COUNTER_VALID]		= BIT(6),
+	[VLAN_TABLE_FID]		= GENMASK(15, 12),
+	[VLAN_TABLE_MEMBERSHIP]		= GENMASK(18, 16),
+	[VLAN_TABLE_VALID]		= BIT(19),
+	[STATIC_MAC_TABLE_VALID]	= BIT(19),
+	[STATIC_MAC_TABLE_USE_FID]	= BIT(21),
+	[STATIC_MAC_TABLE_FID]		= GENMASK(29, 26),
+	[STATIC_MAC_TABLE_OVERRIDE]	= BIT(20),
+	[STATIC_MAC_TABLE_FWD_PORTS]	= GENMASK(18, 16),
+	[DYNAMIC_MAC_TABLE_ENTRIES_H]	= GENMASK(5, 0),
+	[DYNAMIC_MAC_TABLE_MAC_EMPTY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_NOT_READY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_ENTRIES]	= GENMASK(31, 28),
+	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(19, 16),
+	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(21, 20),
+	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(23, 22),
+};
+
+static u8 ksz8863_shifts[] = {
+	[VLAN_TABLE_MEMBERSHIP_S]	= 16,
+	[STATIC_MAC_FWD_PORTS]		= 16,
+	[STATIC_MAC_FID]		= 22,
+	[DYNAMIC_MAC_ENTRIES_H]		= 3,
+	[DYNAMIC_MAC_ENTRIES]		= 24,
+	[DYNAMIC_MAC_FID]		= 16,
+	[DYNAMIC_MAC_TIMESTAMP]		= 24,
+	[DYNAMIC_MAC_SRC_PORT]		= 20,
+};
+
+struct mib_names {
 	char string[ETH_GSTRING_LEN];
-} mib_names[] = {
+};
+
+static const struct mib_names ksz87xx_mib_names[] = {
 	{ "rx_hi" },
 	{ "rx_undersize" },
 	{ "rx_fragments" },
@@ -113,6 +164,48 @@ static const struct {
 	{ "tx_discards" },
 };
 
+static const struct mib_names ksz88xx_mib_names[] = {
+	{ "rx" },
+	{ "rx_hi" },
+	{ "rx_undersize" },
+	{ "rx_fragments" },
+	{ "rx_oversize" },
+	{ "rx_jabbers" },
+	{ "rx_symbol_err" },
+	{ "rx_crc_err" },
+	{ "rx_align_err" },
+	{ "rx_mac_ctrl" },
+	{ "rx_pause" },
+	{ "rx_bcast" },
+	{ "rx_mcast" },
+	{ "rx_ucast" },
+	{ "rx_64_or_less" },
+	{ "rx_65_127" },
+	{ "rx_128_255" },
+	{ "rx_256_511" },
+	{ "rx_512_1023" },
+	{ "rx_1024_1522" },
+	{ "tx" },
+	{ "tx_hi" },
+	{ "tx_late_col" },
+	{ "tx_pause" },
+	{ "tx_bcast" },
+	{ "tx_mcast" },
+	{ "tx_ucast" },
+	{ "tx_deferred" },
+	{ "tx_total_col" },
+	{ "tx_exc_col" },
+	{ "tx_single_col" },
+	{ "tx_mult_col" },
+	{ "rx_discards" },
+	{ "tx_discards" },
+};
+
+static bool ksz_is_ksz88x3(struct ksz_device *dev)
+{
+	return dev->chip_id == 0x8830;
+}
+
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
 	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
@@ -127,10 +220,18 @@ static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
 
 static int ksz8_reset_switch(struct ksz_device *dev)
 {
-	/* reset switch */
-	ksz_write8(dev, REG_POWER_MANAGEMENT_1,
-		   SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
-	ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+	if (ksz_is_ksz88x3(dev)) {
+		/* reset switch */
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true);
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false);
+	} else {
+		/* reset switch */
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+			   SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+	}
 
 	return 0;
 }
@@ -204,8 +305,8 @@ static void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
 	mutex_unlock(&dev->alu_mutex);
 }
 
-static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
-			   u64 *dropped, u64 *cnt)
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
 {
 	struct ksz8 *ksz8 = dev->priv;
 	const u32 *masks;
@@ -219,8 +320,8 @@ static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 	regs = ksz8->regs;
 
 	addr -= dev->reg_mib_cnt;
-	ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
-	ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
+	ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port;
+	ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0;
 	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
 
 	mutex_lock(&dev->alu_mutex);
@@ -257,8 +358,52 @@ static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 	mutex_unlock(&dev->alu_mutex);
 }
 
+static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	struct ksz8 *ksz8 = dev->priv;
+	const u8 *regs = ksz8->regs;
+	u32 *last = (u32 *)dropped;
+	u16 ctrl_addr;
+	u32 data;
+	u32 cur;
+
+	addr -= dev->reg_mib_cnt;
+	ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 :
+			   KSZ8863_MIB_PACKET_DROPPED_RX_0;
+	ctrl_addr += port;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+	mutex_unlock(&dev->alu_mutex);
+
+	data &= MIB_PACKET_DROPPED;
+	cur = last[addr];
+	if (data != cur) {
+		last[addr] = data;
+		if (data < cur)
+			data += MIB_PACKET_DROPPED + 1;
+		data -= cur;
+		*cnt += data;
+	}
+}
+
+static void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			   u64 *dropped, u64 *cnt)
+{
+	if (ksz_is_ksz88x3(dev))
+		ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt);
+	else
+		ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt);
+}
+
 static void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 {
+	if (ksz_is_ksz88x3(dev))
+		return;
+
 	/* enable the port for flush/freeze function */
 	if (freeze)
 		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
@@ -272,11 +417,14 @@ static void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
 {
 	struct ksz_port_mib *mib = &dev->ports[port].mib;
+	u64 *dropped;
 
-	/* flush all enabled port MIB counters */
-	ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
-	ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
-	ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+	if (!ksz_is_ksz88x3(dev)) {
+		/* flush all enabled port MIB counters */
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+		ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+	}
 
 	mib->cnt_ptr = 0;
 
@@ -287,10 +435,13 @@ static void ksz8_port_init_cnt(struct ksz_device *dev, int port)
 		++mib->cnt_ptr;
 	}
 
+	/* last one in storage */
+	dropped = &mib->counters[dev->mib_cnt];
+
 	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
 	while (mib->cnt_ptr < dev->mib_cnt) {
 		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
-					NULL, &mib->counters[mib->cnt_ptr]);
+					dropped, &mib->counters[mib->cnt_ptr]);
 		++mib->cnt_ptr;
 	}
 	mib->cnt_ptr = 0;
@@ -588,8 +739,13 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 			data |= PHY_LOOPBACK;
 		if (ctrl & PORT_FORCE_100_MBIT)
 			data |= PHY_SPEED_100MBIT;
-		if (!(ctrl & PORT_AUTO_NEG_DISABLE))
-			data |= PHY_AUTO_NEG_ENABLE;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((ctrl & PORT_AUTO_NEG_ENABLE))
+				data |= PHY_AUTO_NEG_ENABLE;
+		} else {
+			if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+				data |= PHY_AUTO_NEG_ENABLE;
+		}
 		if (restart & PORT_POWER_DOWN)
 			data |= PHY_POWER_DOWN;
 		if (restart & PORT_AUTO_NEG_RESTART)
@@ -623,7 +779,10 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 		data = KSZ8795_ID_HI;
 		break;
 	case PHY_REG_ID_2:
-		data = KSZ8795_ID_LO;
+		if (ksz_is_ksz88x3(dev))
+			data = KSZ8863_ID_LO;
+		else
+			data = KSZ8795_ID_LO;
 		break;
 	case PHY_REG_AUTO_NEGOTIATION:
 		ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
@@ -686,14 +845,22 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 			ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
 		ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
 		data = ctrl;
-		if (!(val & PHY_AUTO_NEG_ENABLE))
-			data |= PORT_AUTO_NEG_DISABLE;
-		else
-			data &= ~PORT_AUTO_NEG_DISABLE;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((val & PHY_AUTO_NEG_ENABLE))
+				data |= PORT_AUTO_NEG_ENABLE;
+			else
+				data &= ~PORT_AUTO_NEG_ENABLE;
+		} else {
+			if (!(val & PHY_AUTO_NEG_ENABLE))
+				data |= PORT_AUTO_NEG_DISABLE;
+			else
+				data &= ~PORT_AUTO_NEG_DISABLE;
+
+			/* Fiber port does not support auto-negotiation. */
+			if (dev->ports[p].fiber)
+				data |= PORT_AUTO_NEG_DISABLE;
+		}
 
-		/* Fiber port does not support auto-negotiation. */
-		if (dev->ports[p].fiber)
-			data |= PORT_AUTO_NEG_DISABLE;
 		if (val & PHY_SPEED_100MBIT)
 			data |= PORT_FORCE_100_MBIT;
 		else
@@ -767,7 +934,11 @@ static enum dsa_tag_protocol ksz8_get_tag_protocol(struct dsa_switch *ds,
 						   int port,
 						   enum dsa_tag_protocol mp)
 {
-	return DSA_TAG_PROTO_KSZ8795;
+	struct ksz_device *dev = ds->priv;
+
+	/* ksz88x3 uses the same tag schema as KSZ9893 */
+	return ksz_is_ksz88x3(dev) ?
+		DSA_TAG_PROTO_KSZ9893 : DSA_TAG_PROTO_KSZ8795;
 }
 
 static void ksz8_get_strings(struct dsa_switch *ds, int port,
@@ -777,8 +948,8 @@ static void ksz8_get_strings(struct dsa_switch *ds, int port,
 	int i;
 
 	for (i = 0; i < dev->mib_cnt; i++) {
-		memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
-		       ETH_GSTRING_LEN);
+		memcpy(buf + i * ETH_GSTRING_LEN,
+		       dev->mib_names[i].string, ETH_GSTRING_LEN);
 	}
 }
 
@@ -904,6 +1075,9 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
 {
 	struct ksz_device *dev = ds->priv;
 
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
 	ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
 
 	return 0;
@@ -918,6 +1092,9 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
 	u16 data, new_pvid = 0;
 	u8 fid, member, valid;
 
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
 	ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
 
 	ksz8_r_vlan_table(dev, vlan->vid, &data);
@@ -958,6 +1135,9 @@ static int ksz8_port_vlan_del(struct dsa_switch *ds, int port,
 	u16 data, pvid, new_pvid = 0;
 	u8 fid, member, valid;
 
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
 	ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
 	pvid = pvid & 0xFFF;
 
@@ -1091,7 +1271,8 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
-	ksz8795_set_prio_queue(dev, port, 4);
+	if (!ksz_is_ksz88x3(dev))
+		ksz8795_set_prio_queue(dev, port, 4);
 
 	/* disable DiffServ priority */
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
@@ -1104,7 +1285,8 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
 
 	if (cpu_port) {
-		ksz8795_cpu_interface_select(dev, port);
+		if (!ksz_is_ksz88x3(dev))
+			ksz8795_cpu_interface_select(dev, port);
 
 		member = dev->port_mask;
 	} else {
@@ -1156,9 +1338,11 @@ static void ksz8_config_cpu_port(struct dsa_switch *ds)
 		p = &dev->ports[i];
 		if (!p->on)
 			continue;
-		ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
-		if (remote & PORT_FIBER_MODE)
-			p->fiber = 1;
+		if (!ksz_is_ksz88x3(dev)) {
+			ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
+			if (remote & PORT_FIBER_MODE)
+				p->fiber = 1;
+		}
 		if (p->fiber)
 			ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
 				     true);
@@ -1277,19 +1461,30 @@ static int ksz8_switch_detect(struct ksz_device *dev)
 
 	id1 = id16 >> 8;
 	id2 = id16 & SW_CHIP_ID_M;
-	if (id1 != FAMILY_ID ||
-	    (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
-		return -ENODEV;
 
-	if (id2 == CHIP_ID_95) {
-		u8 val;
+	switch (id1) {
+	case KSZ87_FAMILY_ID:
+		if ((id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
+			return -ENODEV;
+
+		if (id2 == CHIP_ID_95) {
+			u8 val;
 
-		id2 = 0x95;
-		ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
-		if (val & PORT_FIBER_MODE)
-			id2 = 0x65;
-	} else if (id2 == CHIP_ID_94) {
-		id2 = 0x94;
+			id2 = 0x95;
+			ksz_read8(dev, REG_PORT_STATUS_0, &val);
+			if (val & PORT_FIBER_MODE)
+				id2 = 0x65;
+		} else if (id2 == CHIP_ID_94) {
+			id2 = 0x94;
+		}
+		break;
+	case KSZ88_FAMILY_ID:
+		if (id2 != CHIP_ID_63)
+			return -ENODEV;
+		break;
+	default:
+		dev_err(dev->dev, "invalid family id: %d\n", id1);
+		return -ENODEV;
 	}
 	id16 &= ~0xff;
 	id16 |= id2;
@@ -1350,6 +1545,15 @@ static const struct ksz_chip_data ksz8_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 	},
+	{
+		.chip_id = 0x8830,
+		.dev_name = "KSZ8863/KSZ8873",
+		.num_vlans = 16,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x4,	/* can be configured as cpu port */
+		.port_cnt = 3,
+	},
 };
 
 static int ksz8_switch_init(struct ksz_device *dev)
@@ -1382,12 +1586,21 @@ static int ksz8_switch_init(struct ksz_device *dev)
 	if (!dev->cpu_ports)
 		return -ENODEV;
 
-	ksz8->regs = ksz8795_regs;
-	ksz8->masks = ksz8795_masks;
-	ksz8->shifts = ksz8795_shifts;
+	if (ksz_is_ksz88x3(dev)) {
+		ksz8->regs = ksz8863_regs;
+		ksz8->masks = ksz8863_masks;
+		ksz8->shifts = ksz8863_shifts;
+		dev->mib_cnt = ARRAY_SIZE(ksz88xx_mib_names);
+		dev->mib_names = ksz88xx_mib_names;
+	} else {
+		ksz8->regs = ksz8795_regs;
+		ksz8->masks = ksz8795_masks;
+		ksz8->shifts = ksz8795_shifts;
+		dev->mib_cnt = ARRAY_SIZE(ksz87xx_mib_names);
+		dev->mib_names = ksz87xx_mib_names;
+	}
 
-	dev->reg_mib_cnt = KSZ8795_COUNTER_NUM;
-	dev->mib_cnt = ARRAY_SIZE(mib_names);
+	dev->reg_mib_cnt = MIB_COUNTER_NUM;
 
 	dev->ports = devm_kzalloc(dev->dev,
 				  dev->port_cnt * sizeof(struct ksz_port),
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index eea78c5636a0..c2e52c40a54c 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -16,7 +16,8 @@
 
 #define REG_CHIP_ID0			0x00
 
-#define FAMILY_ID			0x87
+#define KSZ87_FAMILY_ID			0x87
+#define KSZ88_FAMILY_ID			0x88
 
 #define REG_CHIP_ID1			0x01
 
@@ -28,6 +29,12 @@
 
 #define CHIP_ID_94			0x60
 #define CHIP_ID_95			0x90
+#define CHIP_ID_63			0x30
+
+#define KSZ8863_REG_SW_RESET		0x43
+
+#define KSZ8863_GLOBAL_SOFTWARE_RESET	BIT(4)
+#define KSZ8863_PCS_RESET		BIT(0)
 
 #define REG_SW_CTRL_0			0x02
 
@@ -267,6 +274,7 @@
 #define REG_PORT_3_CTRL_9		0x3C
 #define REG_PORT_4_CTRL_9		0x4C
 
+#define PORT_AUTO_NEG_ENABLE		BIT(7)
 #define PORT_AUTO_NEG_DISABLE		BIT(7)
 #define PORT_FORCE_100_MBIT		BIT(6)
 #define PORT_FORCE_FULL_DUPLEX		BIT(5)
@@ -800,6 +808,7 @@
 
 #define KSZ8795_ID_HI			0x0022
 #define KSZ8795_ID_LO			0x1550
+#define KSZ8863_ID_LO			0x1430
 
 #define KSZ8795_SW_ID			0x8795
 
@@ -830,7 +839,7 @@
 
 #define KS_PRIO_IN_REG			4
 
-#define KSZ8795_COUNTER_NUM		0x20
+#define MIB_COUNTER_NUM		0x20
 
 /* Common names used by other drivers */
 
@@ -876,26 +885,13 @@
 
 #define MIB_COUNTER_VALUE		0x3FFFFFFF
 
-#define KS_MIB_TOTAL_RX_0		0x100
-#define KS_MIB_TOTAL_TX_0		0x101
-#define KS_MIB_PACKET_DROPPED_RX_0	0x102
-#define KS_MIB_PACKET_DROPPED_TX_0	0x103
-#define KS_MIB_TOTAL_RX_1		0x104
-#define KS_MIB_TOTAL_TX_1		0x105
-#define KS_MIB_PACKET_DROPPED_TX_1	0x106
-#define KS_MIB_PACKET_DROPPED_RX_1	0x107
-#define KS_MIB_TOTAL_RX_2		0x108
-#define KS_MIB_TOTAL_TX_2		0x109
-#define KS_MIB_PACKET_DROPPED_TX_2	0x10A
-#define KS_MIB_PACKET_DROPPED_RX_2	0x10B
-#define KS_MIB_TOTAL_RX_3		0x10C
-#define KS_MIB_TOTAL_TX_3		0x10D
-#define KS_MIB_PACKET_DROPPED_TX_3	0x10E
-#define KS_MIB_PACKET_DROPPED_RX_3	0x10F
-#define KS_MIB_TOTAL_RX_4		0x110
-#define KS_MIB_TOTAL_TX_4		0x111
-#define KS_MIB_PACKET_DROPPED_TX_4	0x112
-#define KS_MIB_PACKET_DROPPED_RX_4	0x113
+#define KSZ8795_MIB_TOTAL_RX_0		0x100
+#define KSZ8795_MIB_TOTAL_TX_0		0x101
+#define KSZ8795_MIB_TOTAL_RX_1		0x104
+#define KSZ8795_MIB_TOTAL_TX_1		0x105
+
+#define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100
+#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105
 
 #define MIB_PACKET_DROPPED		0x0000FFFF
 
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f0681a891cca..e0bbdca64375 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -71,6 +71,7 @@ struct ksz_device {
 	int port_cnt;
 	int reg_mib_cnt;
 	int mib_cnt;
+	const struct mib_names *mib_names;
 	phy_interface_t compat_interface;
 	u32 regs_size;
 	bool phy_errata_9477;
-- 
2.29.2

[PATCH net-next v8 5/9] net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

Add KSZ88X3 driver support. We add support for the KXZ88X3 three port
switches using the SPI Interface.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

---
v1 -> v2: - this glue was not implemented
v2 -> v3: - this glue was part of previous bigger patch
v3 -> v4: - this glue was moved to this separate patch
v4 -> v5: - added reviewed by from f.fainelli
          - using device_get_match_data instead of own matching code
---
 drivers/net/dsa/microchip/ksz8795_spi.c | 44 ++++++++++++++++++-------
 1 file changed, 32 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index 45420c07c99f..85ba12aa82d8 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -14,34 +14,52 @@
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 
+#include "ksz8.h"
 #include "ksz_common.h"
 
-#define SPI_ADDR_SHIFT			12
-#define SPI_ADDR_ALIGN			3
-#define SPI_TURNAROUND_SHIFT		1
+#define KSZ8795_SPI_ADDR_SHIFT			12
+#define KSZ8795_SPI_ADDR_ALIGN			3
+#define KSZ8795_SPI_TURNAROUND_SHIFT		1
 
-KSZ_REGMAP_TABLE(ksz8795, 16, SPI_ADDR_SHIFT,
-		 SPI_TURNAROUND_SHIFT, SPI_ADDR_ALIGN);
+#define KSZ8863_SPI_ADDR_SHIFT			8
+#define KSZ8863_SPI_ADDR_ALIGN			8
+#define KSZ8863_SPI_TURNAROUND_SHIFT		0
+
+KSZ_REGMAP_TABLE(ksz8795, 16, KSZ8795_SPI_ADDR_SHIFT,
+		 KSZ8795_SPI_TURNAROUND_SHIFT, KSZ8795_SPI_ADDR_ALIGN);
+
+KSZ_REGMAP_TABLE(ksz8863, 16, KSZ8863_SPI_ADDR_SHIFT,
+		 KSZ8863_SPI_TURNAROUND_SHIFT, KSZ8863_SPI_ADDR_ALIGN);
 
 static int ksz8795_spi_probe(struct spi_device *spi)
 {
+	const struct regmap_config *regmap_config;
+	struct device *ddev = &spi->dev;
 	struct regmap_config rc;
 	struct ksz_device *dev;
-	int i, ret;
+	struct ksz8 *ksz8;
+	int i, ret = 0;
 
-	dev = ksz_switch_alloc(&spi->dev, spi);
+	ksz8 = devm_kzalloc(&spi->dev, sizeof(struct ksz8), GFP_KERNEL);
+	ksz8->priv = spi;
+
+	dev = ksz_switch_alloc(&spi->dev, ksz8);
 	if (!dev)
 		return -ENOMEM;
 
+	regmap_config = device_get_match_data(ddev);
+	if (!regmap_config)
+		return -EINVAL;
+
 	for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) {
-		rc = ksz8795_regmap_config[i];
+		rc = regmap_config[i];
 		rc.lock_arg = &dev->regmap_mutex;
 		dev->regmap[i] = devm_regmap_init_spi(spi, &rc);
 		if (IS_ERR(dev->regmap[i])) {
 			ret = PTR_ERR(dev->regmap[i]);
 			dev_err(&spi->dev,
 				"Failed to initialize regmap%i: %d\n",
-				ksz8795_regmap_config[i].val_bits, ret);
+				regmap_config[i].val_bits, ret);
 			return ret;
 		}
 	}
@@ -85,9 +103,11 @@ static void ksz8795_spi_shutdown(struct spi_device *spi)
 }
 
 static const struct of_device_id ksz8795_dt_ids[] = {
-	{ .compatible = "microchip,ksz8765" },
-	{ .compatible = "microchip,ksz8794" },
-	{ .compatible = "microchip,ksz8795" },
+	{ .compatible = "microchip,ksz8765", .data = &ksz8795_regmap_config },
+	{ .compatible = "microchip,ksz8794", .data = &ksz8795_regmap_config },
+	{ .compatible = "microchip,ksz8795", .data = &ksz8795_regmap_config },
+	{ .compatible = "microchip,ksz8863", .data = &ksz8863_regmap_config },
+	{ .compatible = "microchip,ksz8873", .data = &ksz8863_regmap_config },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ksz8795_dt_ids);
-- 
2.29.2

[PATCH net-next v8 6/9] dt-bindings: net: dsa: document additional Microchip KSZ8863/8873 switch

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

It is a 3-Port 10/100 Ethernet Switch. One CPU-Port and two
Switch-Ports.

Cc: devicetree@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

---
v1 -> v3: - nothing changes
          - already Acked-by Rob Herring
v1 -> v4: - nothing changes
v4 -> v5: - nothing changes
---
 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 9f7d131bbcef..84985f53bffd 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -21,6 +21,8 @@ properties:
       - microchip,ksz8765
       - microchip,ksz8794
       - microchip,ksz8795
+      - microchip,ksz8863
+      - microchip,ksz8873
       - microchip,ksz9477
       - microchip,ksz9897
       - microchip,ksz9896
-- 
2.29.2

[PATCH net-next v8 7/9] net: phy: Add support for microchip SMI0 MDIO bus

[Oleksij Rempel]

From: Andrew Lunn <andrew@lunn.ch>

SMI0 is a mangled version of MDIO. The main low level difference is
the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The
read/write information is instead encoded in the PHY address.

Extend the bit-bang code to allow the op code to be overridden, but
default to normal C22 values. Add an extra compatible to the mdio-gpio
driver, and when this compatible is present, set the op codes to 0.

A higher level driver, sitting on top of the basic MDIO bus driver can
then implement the rest of the microchip SMI0 odderties.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---
v1 -> v2: - patch not present
v2 -> v3: - first patch
v3 -> v4: - added override_c22_op
v4 -> v5: - moved override_c22_op out of else case
---
 drivers/net/mdio/mdio-bitbang.c | 8 ++++++--
 drivers/net/mdio/mdio-gpio.c    | 8 ++++++++
 include/linux/mdio-bitbang.h    | 3 +++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/mdio-bitbang.c b/drivers/net/mdio/mdio-bitbang.c
index 0f457c436335..07609114a26b 100644
--- a/drivers/net/mdio/mdio-bitbang.c
+++ b/drivers/net/mdio/mdio-bitbang.c
@@ -158,7 +158,7 @@ int mdiobb_read(struct mii_bus *bus, int phy, int reg)
 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
 	} else
-		mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+		mdiobb_cmd(ctrl, ctrl->op_c22_read, phy, reg);
 
 	ctrl->ops->set_mdio_dir(ctrl, 0);
 
@@ -190,7 +190,7 @@ int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
 	} else
-		mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+		mdiobb_cmd(ctrl, ctrl->op_c22_write, phy, reg);
 
 	/* send the turnaround (10) */
 	mdiobb_send_bit(ctrl, 1);
@@ -217,6 +217,10 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
 	bus->read = mdiobb_read;
 	bus->write = mdiobb_write;
 	bus->priv = ctrl;
+	if (!ctrl->override_op_c22) {
+		ctrl->op_c22_read = MDIO_READ;
+		ctrl->op_c22_write = MDIO_WRITE;
+	}
 
 	return bus;
 }
diff --git a/drivers/net/mdio/mdio-gpio.c b/drivers/net/mdio/mdio-gpio.c
index 56c8f914f893..0fb3c2de0845 100644
--- a/drivers/net/mdio/mdio-gpio.c
+++ b/drivers/net/mdio/mdio-gpio.c
@@ -132,6 +132,13 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 		new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
 	}
 
+	if (dev->of_node &&
+	    of_device_is_compatible(dev->of_node, "microchip,mdio-smi0")) {
+		bitbang->ctrl.op_c22_read = 0;
+		bitbang->ctrl.op_c22_write = 0;
+		bitbang->ctrl.override_op_c22 = 1;
+	}
+
 	dev_set_drvdata(dev, new_bus);
 
 	return new_bus;
@@ -196,6 +203,7 @@ static int mdio_gpio_remove(struct platform_device *pdev)
 
 static const struct of_device_id mdio_gpio_of_match[] = {
 	{ .compatible = "virtual,mdio-gpio", },
+	{ .compatible = "microchip,mdio-smi0" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mdio_gpio_of_match);
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
index aca4dc037b70..373630fe5c28 100644
--- a/include/linux/mdio-bitbang.h
+++ b/include/linux/mdio-bitbang.h
@@ -33,6 +33,9 @@ struct mdiobb_ops {
 
 struct mdiobb_ctrl {
 	const struct mdiobb_ops *ops;
+	unsigned int override_op_c22;
+	u8 op_c22_read;
+	u8 op_c22_write;
 };
 
 int mdiobb_read(struct mii_bus *bus, int phy, int reg);
-- 
2.29.2

[PATCH net-next v8 8/9] net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

Add KSZ88X3 driver support. We add support for the KXZ88X3 three port
switches using the Microchip SMI Interface. They are supported using the
MDIO-Bitbang Interface.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

---
v1 -> v2:  - this code was part of previuos patch
v2 -> v3:  - this code was part of previuos patch
v3 -> v4:  - moved this glue code so separate patch
           - fixed locking in regmap and mdio_read/mdio_write
v4 -> v5:  - removed extra default y in Kconfig
           - fixed capitalization in Kconfig description
	   - removed unnecessary cast
	   - added back the define for READ operation
	   - added KSZ88x3 to help text for KSZ8795 Kconfig entry
---
 drivers/net/dsa/microchip/Kconfig       |  10 +-
 drivers/net/dsa/microchip/Makefile      |   1 +
 drivers/net/dsa/microchip/ksz8863_smi.c | 213 ++++++++++++++++++++++++
 3 files changed, 223 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/dsa/microchip/ksz8863_smi.c

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 4ec6a47b7f72..c9e2a8989556 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -29,7 +29,7 @@ menuconfig NET_DSA_MICROCHIP_KSZ8795
 	depends on NET_DSA
 	select NET_DSA_MICROCHIP_KSZ_COMMON
 	help
-	  This driver adds support for Microchip KSZ8795 switch chips.
+	  This driver adds support for Microchip KSZ8795/KSZ88X3 switch chips.
 
 config NET_DSA_MICROCHIP_KSZ8795_SPI
 	tristate "KSZ8795 series SPI connected switch driver"
@@ -40,3 +40,11 @@ config NET_DSA_MICROCHIP_KSZ8795_SPI
 
 	  It is required to use the KSZ8795 switch driver as the only access
 	  is through SPI.
+
+config NET_DSA_MICROCHIP_KSZ8863_SMI
+	tristate "KSZ series SMI connected switch driver"
+	depends on NET_DSA_MICROCHIP_KSZ8795
+	select MDIO_BITBANG
+	help
+	  Select to enable support for registering switches configured through
+	  Microchip SMI. It supports the KSZ8863 and KSZ8873 switch.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 929caa81e782..2a03b21a3386 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C)	+= ksz9477_i2c.o
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI)	+= ksz9477_spi.o
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795)		+= ksz8795.o
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI)	+= ksz8795_spi.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI)	+= ksz8863_smi.o
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
new file mode 100644
index 000000000000..30d97ea7a949
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8863 series register access through SMI
+ *
+ * Copyright (C) 2019 Pengutronix, Michael Grzeschik <kernel@pengutronix.de>
+ */
+
+#include "ksz8.h"
+#include "ksz_common.h"
+
+/* Serial Management Interface (SMI) uses the following frame format:
+ *
+ *       preamble|start|Read/Write|  PHY   |  REG  |TA|   Data bits      | Idle
+ *               |frame| OP code  |address |address|  |                  |
+ * read | 32x1´s | 01  |    00    | 1xRRR  | RRRRR |Z0| 00000000DDDDDDDD |  Z
+ * write| 32x1´s | 01  |    00    | 0xRRR  | RRRRR |10| xxxxxxxxDDDDDDDD |  Z
+ *
+ */
+
+#define SMI_KSZ88XX_READ_PHY	BIT(4)
+
+static int ksz8863_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
+			     void *val_buf, size_t val_len)
+{
+	struct ksz_device *dev = ctx;
+	struct mdio_device *mdev;
+	u8 reg = *(u8 *)reg_buf;
+	u8 *val = val_buf;
+	struct ksz8 *ksz8;
+	int i, ret = 0;
+
+	ksz8 = dev->priv;
+	mdev = ksz8->priv;
+
+	mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	for (i = 0; i < val_len; i++) {
+		int tmp = reg + i;
+
+		ret = __mdiobus_read(mdev->bus, ((tmp & 0xE0) >> 5) |
+				     SMI_KSZ88XX_READ_PHY, tmp);
+		if (ret < 0)
+			goto out;
+
+		val[i] = ret;
+	}
+	ret = 0;
+
+ out:
+	mutex_unlock(&mdev->bus->mdio_lock);
+
+	return ret;
+}
+
+static int ksz8863_mdio_write(void *ctx, const void *data, size_t count)
+{
+	struct ksz_device *dev = ctx;
+	struct mdio_device *mdev;
+	struct ksz8 *ksz8;
+	int i, ret = 0;
+	u32 reg;
+	u8 *val;
+
+	ksz8 = dev->priv;
+	mdev = ksz8->priv;
+
+	val = (u8 *)(data + 4);
+	reg = *(u32 *)data;
+
+	mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	for (i = 0; i < (count - 4); i++) {
+		int tmp = reg + i;
+
+		ret = __mdiobus_write(mdev->bus, ((tmp & 0xE0) >> 5),
+				      tmp, val[i]);
+		if (ret < 0)
+			goto out;
+	}
+
+ out:
+	mutex_unlock(&mdev->bus->mdio_lock);
+
+	return ret;
+}
+
+static const struct regmap_bus regmap_smi[] = {
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+		.max_raw_read = 1,
+		.max_raw_write = 1,
+	},
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+		.val_format_endian_default = REGMAP_ENDIAN_BIG,
+		.max_raw_read = 2,
+		.max_raw_write = 2,
+	},
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+		.val_format_endian_default = REGMAP_ENDIAN_BIG,
+		.max_raw_read = 4,
+		.max_raw_write = 4,
+	}
+};
+
+static const struct regmap_config ksz8863_regmap_config[] = {
+	{
+		.name = "#8",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 8,
+		.cache_type = REGCACHE_NONE,
+		.use_single_read = 1,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	},
+	{
+		.name = "#16",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 16,
+		.cache_type = REGCACHE_NONE,
+		.use_single_read = 1,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	},
+	{
+		.name = "#32",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 32,
+		.cache_type = REGCACHE_NONE,
+		.use_single_read = 1,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	}
+};
+
+static int ksz8863_smi_probe(struct mdio_device *mdiodev)
+{
+	struct regmap_config rc;
+	struct ksz_device *dev;
+	struct ksz8 *ksz8;
+	int ret;
+	int i;
+
+	ksz8 = devm_kzalloc(&mdiodev->dev, sizeof(struct ksz8), GFP_KERNEL);
+	ksz8->priv = mdiodev;
+
+	dev = ksz_switch_alloc(&mdiodev->dev, ksz8);
+	if (!dev)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(ksz8863_regmap_config); i++) {
+		rc = ksz8863_regmap_config[i];
+		rc.lock_arg = &dev->regmap_mutex;
+		dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
+						  &regmap_smi[i], dev,
+						  &rc);
+		if (IS_ERR(dev->regmap[i])) {
+			ret = PTR_ERR(dev->regmap[i]);
+			dev_err(&mdiodev->dev,
+				"Failed to initialize regmap%i: %d\n",
+				ksz8863_regmap_config[i].val_bits, ret);
+			return ret;
+		}
+	}
+
+	if (mdiodev->dev.platform_data)
+		dev->pdata = mdiodev->dev.platform_data;
+
+	ret = ksz8_switch_register(dev);
+
+	/* Main DSA driver may not be started yet. */
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(&mdiodev->dev, dev);
+
+	return 0;
+}
+
+static void ksz8863_smi_remove(struct mdio_device *mdiodev)
+{
+	struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+	if (dev)
+		ksz_switch_remove(dev);
+}
+
+static const struct of_device_id ksz8863_dt_ids[] = {
+	{ .compatible = "microchip,ksz8863" },
+	{ .compatible = "microchip,ksz8873" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ksz8863_dt_ids);
+
+static struct mdio_driver ksz8863_driver = {
+	.probe	= ksz8863_smi_probe,
+	.remove	= ksz8863_smi_remove,
+	.mdiodrv.driver = {
+		.name	= "ksz8863-switch",
+		.of_match_table = ksz8863_dt_ids,
+	},
+};
+
+mdio_module_driver(ksz8863_driver);
+
+MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>");
+MODULE_DESCRIPTION("Microchip KSZ8863 SMI Switch driver");
+MODULE_LICENSE("GPL v2");
-- 
2.29.2

[PATCH net-next v8 9/9] dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0

[Oleksij Rempel]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

Microchip SMI0 Mode is a special mode, where the MDIO Read/Write
commands are part of the PHY Address and the OP Code is always 0. We add
the compatible for this special mode of the bitbanged mdio driver.

Cc: devicetree@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

---
v1 -> v2: - patch not present
v2 -> v3: - first patch
v3 -> v4: - no changes
---
 Documentation/devicetree/bindings/net/mdio-gpio.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index 8dbcf8295c6c..4d91a36c5cf5 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt
@@ -2,6 +2,7 @@ MDIO on GPIOs
 
 Currently defined compatibles:
 - virtual,gpio-mdio
+- microchip,mdio-smi0
 
 MDC and MDIO lines connected to GPIO controllers are listed in the
 gpios property as described in section VIII.1 in the following order:
-- 
2.29.2

Re: [PATCH net-next v8 4/9] net: dsa: microchip: ksz8795: add support for ksz88xx chips

[Andrew Lunn]

On Tue, Apr 27, 2021 at 09:09:04AM +0200, Oleksij Rempel wrote:
> We add support for the ksz8863 and ksz8873 chips which are
> using the same register patterns but other offsets as the
> ksz8795.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v8 0/9] microchip: add support for ksz88x3 driver family

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 27 Apr 2021 09:09:00 +0200 you wrote:
> changes v8:
> - add Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> - fix build issue on "net: dsa: microchip: ksz8795: move register
>   offsets and shifts to separate struct"
> 
> changes v7:
> - Reverse christmas tree fixes
> - remove IS_88X3 and use chip_id instead
> - drop own tag and use DSA_TAG_PROTO_KSZ9893 instead
> 
> [...]

Here is the summary with links:
  - [net-next,v8,1/9] net: dsa: microchip: ksz8795: change drivers prefix to be generic
    https://git.kernel.org/netdev/net-next/c/4b5baca0403e
  - [net-next,v8,2/9] net: dsa: microchip: ksz8795: move cpu_select_interface to extra function
    https://git.kernel.org/netdev/net-next/c/c2ac4d2ac534
  - [net-next,v8,3/9] net: dsa: microchip: ksz8795: move register offsets and shifts to separate struct
    https://git.kernel.org/netdev/net-next/c/9f73e11250fb
  - [net-next,v8,4/9] net: dsa: microchip: ksz8795: add support for ksz88xx chips
    https://git.kernel.org/netdev/net-next/c/4b20a07e103f
  - [net-next,v8,5/9] net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support
    https://git.kernel.org/netdev/net-next/c/cc13e52c3a89
  - [net-next,v8,6/9] dt-bindings: net: dsa: document additional Microchip KSZ8863/8873 switch
    https://git.kernel.org/netdev/net-next/c/61df0e7bbb90
  - [net-next,v8,7/9] net: phy: Add support for microchip SMI0 MDIO bus
    https://git.kernel.org/netdev/net-next/c/800fcab8230f
  - [net-next,v8,8/9] net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support
    https://git.kernel.org/netdev/net-next/c/60a364760002
  - [net-next,v8,9/9] dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
    https://git.kernel.org/netdev/net-next/c/61b405985a6b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html