From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: peng.fan@oss.nxp.com, marex@denx.de, frieder.schrempf@kontron.de,
tharvey@gateworks.com, aford@beaconembedded.com,
Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andrey Smirnov <andrew.smirnov@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V3 5/5] arm64: dts: imx8mn: Add GPU node
Date: Thu, 29 Apr 2021 16:16:24 -0500 [thread overview]
Message-ID: <20210429211625.1835702-6-aford173@gmail.com> (raw)
In-Reply-To: <20210429211625.1835702-1-aford173@gmail.com>
According to the documentation from NXP, the i.MX8M Nano has a
Vivante GC7000 Ultra Lite as its GPU core.
With this patch, the Etnaviv driver presents the GPU as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
The stock operating voltage for the i.MX8M Nano is .85V which means
the GPU needs to run at 400MHz. For boards where the operating
voltage is higher, this can be increased.
Signed-off-by: Adam Ford <aford173@gmail.com>
---
V3: Rebase on series starting https://lkml.org/lkml/2021/4/29/72
V2: Move into this series
Update clocking description
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a2ca25aa8eb6..07a8ff58d44c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1040,6 +1040,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
prev parent reply other threads:[~2021-04-29 21:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-29 21:16 [PATCH V3 0/5] soc: imx8mn: Add gpcv2, USB and GPU Adam Ford
2021-04-29 21:16 ` [PATCH V3 1/5] dt-bindings: add defines for i.MX8MN power domains Adam Ford
2021-04-29 21:16 ` [PATCH V3 2/5] soc: imx: gpcv2: add support " Adam Ford
2021-04-29 21:16 ` [PATCH V3 3/5] arm64: dts: imx8mn: add GPC node and " Adam Ford
2021-04-29 21:16 ` [PATCH V3 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller Adam Ford
2021-04-29 21:16 ` Adam Ford [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210429211625.1835702-6-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=andrew.smirnov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=peng.fan@oss.nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).