linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
	Justin Tee <justin.tee@broadcom.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 53/57] scsi: lpfc: Fix error handling for mailboxes completed in MBX_POLL mode
Date: Mon,  3 May 2021 12:39:37 -0400	[thread overview]
Message-ID: <20210503163941.2853291-53-sashal@kernel.org> (raw)
In-Reply-To: <20210503163941.2853291-1-sashal@kernel.org>

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 304ee43238fed517faa123e034b593905b8679f8 ]

In SLI-4, when performing a mailbox command with MBX_POLL, the driver uses
the BMBX register to send the command rather than the MQ. A flag is set
indicating the BMBX register is active and saves the mailbox job struct
(mboxq) in the mbox_active element of the adapter. The routine then waits
for completion or timeout. The mailbox job struct is not freed by the
routine. In cases of timeout, the adapter will be reset. The
lpfc_sli_mbox_sys_flush() routine will clean up the mbox in preparation for
the reset. It clears the BMBX active flag and marks the job structure as
MBX_NOT_FINISHED. But, it never frees the mboxq job structure. Expectation
in both normal completion and timeout cases is that the issuer of the mbx
command will free the structure.  Unfortunately, not all calling paths are
freeing the memory in cases of error.

All calling paths were looked at and updated, if missing, to free the mboxq
memory regardless of completion status.

Link: https://lore.kernel.org/r/20210412013127.2387-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_attr.c | 75 +++++++++++++++++++++--------------
 drivers/scsi/lpfc/lpfc_init.c |  9 ++---
 drivers/scsi/lpfc/lpfc_sli.c  | 42 ++++++++++----------
 3 files changed, 70 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index bb973901b672..45db19e31b34 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1691,8 +1691,7 @@ lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out)
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
 				"0071 Set trunk mode failed with status: %d",
 				rc);
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mbox, phba->mbox_mem_pool);
+	mempool_free(mbox, phba->mbox_mem_pool);
 
 	return 0;
 }
@@ -6608,15 +6607,19 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmboxq->ctx_buf = NULL;
 	pmboxq->vport = vport;
 
-	if (vport->fc_flag & FC_OFFLINE_MODE)
+	if (vport->fc_flag & FC_OFFLINE_MODE) {
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
-	else
-		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
-
-	if (rc != MBX_SUCCESS) {
-		if (rc != MBX_TIMEOUT)
+		if (rc != MBX_SUCCESS) {
 			mempool_free(pmboxq, phba->mbox_mem_pool);
-		return NULL;
+			return NULL;
+		}
+	} else {
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+		if (rc != MBX_SUCCESS) {
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmboxq, phba->mbox_mem_pool);
+			return NULL;
+		}
 	}
 
 	memset(hs, 0, sizeof (struct fc_host_statistics));
@@ -6640,15 +6643,19 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	pmboxq->ctx_buf = NULL;
 	pmboxq->vport = vport;
 
-	if (vport->fc_flag & FC_OFFLINE_MODE)
+	if (vport->fc_flag & FC_OFFLINE_MODE) {
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
-	else
-		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
-
-	if (rc != MBX_SUCCESS) {
-		if (rc != MBX_TIMEOUT)
+		if (rc != MBX_SUCCESS) {
 			mempool_free(pmboxq, phba->mbox_mem_pool);
-		return NULL;
+			return NULL;
+		}
+	} else {
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+		if (rc != MBX_SUCCESS) {
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmboxq, phba->mbox_mem_pool);
+			return NULL;
+		}
 	}
 
 	hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
@@ -6721,15 +6728,19 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-		(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
+		(!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
-	else
-		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
-
-	if (rc != MBX_SUCCESS) {
-		if (rc != MBX_TIMEOUT)
+		if (rc != MBX_SUCCESS) {
 			mempool_free(pmboxq, phba->mbox_mem_pool);
-		return;
+			return;
+		}
+	} else {
+		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+		if (rc != MBX_SUCCESS) {
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmboxq, phba->mbox_mem_pool);
+			return;
+		}
 	}
 
 	memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
@@ -6739,15 +6750,19 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	pmboxq->vport = vport;
 
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
-	    (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
+	    (!(psli->sli_flag & LPFC_SLI_ACTIVE))) {
 		rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
-	else
+		if (rc != MBX_SUCCESS) {
+			mempool_free(pmboxq, phba->mbox_mem_pool);
+			return;
+		}
+	} else {
 		rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
-
-	if (rc != MBX_SUCCESS) {
-		if (rc != MBX_TIMEOUT)
-			mempool_free( pmboxq, phba->mbox_mem_pool);
-		return;
+		if (rc != MBX_SUCCESS) {
+			if (rc != MBX_TIMEOUT)
+				mempool_free(pmboxq, phba->mbox_mem_pool);
+			return;
+		}
 	}
 
 	lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d4c83eca0ad2..9ff463b597d2 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9387,8 +9387,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 				"3250 QUERY_FW_CFG mailbox failed with status "
 				"x%x add_status x%x, mbx status x%x\n",
 				shdr_status, shdr_add_status, rc);
-		if (rc != MBX_TIMEOUT)
-			mempool_free(mboxq, phba->mbox_mem_pool);
+		mempool_free(mboxq, phba->mbox_mem_pool);
 		rc = -ENXIO;
 		goto out_error;
 	}
@@ -9404,8 +9403,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 			"ulp1_mode:x%x\n", phba->sli4_hba.fw_func_mode,
 			phba->sli4_hba.ulp0_mode, phba->sli4_hba.ulp1_mode);
 
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
+	mempool_free(mboxq, phba->mbox_mem_pool);
 
 	/*
 	 * Set up HBA Event Queues (EQs)
@@ -10001,8 +9999,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
 					 &shdr->response);
-		if (rc != MBX_TIMEOUT)
-			mempool_free(mboxq, phba->mbox_mem_pool);
+		mempool_free(mboxq, phba->mbox_mem_pool);
 		if (shdr_status || shdr_add_status || rc) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"0495 SLI_FUNCTION_RESET mailbox "
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 79ae01bc7abf..ef7cef316d21 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5423,12 +5423,10 @@ lpfc_sli4_get_ctl_attr(struct lpfc_hba *phba)
 			phba->sli4_hba.lnk_info.lnk_no,
 			phba->BIOSVersion);
 out_free_mboxq:
-	if (rc != MBX_TIMEOUT) {
-		if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
-			lpfc_sli4_mbox_cmd_free(phba, mboxq);
-		else
-			mempool_free(mboxq, phba->mbox_mem_pool);
-	}
+	if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	else
+		mempool_free(mboxq, phba->mbox_mem_pool);
 	return rc;
 }
 
@@ -5529,12 +5527,10 @@ lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
 	}
 
 out_free_mboxq:
-	if (rc != MBX_TIMEOUT) {
-		if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
-			lpfc_sli4_mbox_cmd_free(phba, mboxq);
-		else
-			mempool_free(mboxq, phba->mbox_mem_pool);
-	}
+	if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	else
+		mempool_free(mboxq, phba->mbox_mem_pool);
 	return rc;
 }
 
@@ -16485,8 +16481,7 @@ lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 				"2509 RQ_DESTROY mailbox failed with "
 				"status x%x add_status x%x, mbx status x%x\n",
 				shdr_status, shdr_add_status, rc);
-		if (rc != MBX_TIMEOUT)
-			mempool_free(mbox, hrq->phba->mbox_mem_pool);
+		mempool_free(mbox, hrq->phba->mbox_mem_pool);
 		return -ENXIO;
 	}
 	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
@@ -16583,7 +16578,9 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba,
 	shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
-	if (rc != MBX_TIMEOUT)
+	if (!phba->sli4_hba.intr_enable)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	else if (rc != MBX_TIMEOUT)
 		mempool_free(mbox, phba->mbox_mem_pool);
 	if (shdr_status || shdr_add_status || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -16778,7 +16775,9 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba,
 	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
-	if (rc != MBX_TIMEOUT)
+	if (!phba->sli4_hba.intr_enable)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	else if (rc != MBX_TIMEOUT)
 		lpfc_sli4_mbox_cmd_free(phba, mbox);
 	if (shdr_status || shdr_add_status || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -16891,7 +16890,9 @@ lpfc_sli4_post_io_sgl_block(struct lpfc_hba *phba, struct list_head *nblist,
 	shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
-	if (rc != MBX_TIMEOUT)
+	if (!phba->sli4_hba.intr_enable)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	else if (rc != MBX_TIMEOUT)
 		lpfc_sli4_mbox_cmd_free(phba, mbox);
 	if (shdr_status || shdr_add_status || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
@@ -18238,8 +18239,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
 	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
+	mempool_free(mboxq, phba->mbox_mem_pool);
 	if (shdr_status || shdr_add_status || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2514 POST_RPI_HDR mailbox failed with "
@@ -19464,7 +19464,9 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 			break;
 		}
 	}
-	if (rc != MBX_TIMEOUT)
+	if (!phba->sli4_hba.intr_enable)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	else if (rc != MBX_TIMEOUT)
 		mempool_free(mbox, phba->mbox_mem_pool);
 	if (shdr_status || shdr_add_status || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-- 
2.30.2


  parent reply	other threads:[~2021-05-03 17:00 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-03 16:38 [PATCH AUTOSEL 5.4 01/57] drm: Added orientation quirk for OneGX1 Pro Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 02/57] drm/qxl: release shadow on shutdown Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 03/57] drm/amd/display: Check for DSC support instead of ASIC revision Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 04/57] drm/amd/display: Don't optimize bandwidth before disabling planes Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 05/57] scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 06/57] scsi: lpfc: Fix pt2pt connection does not recover after LOGO Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 07/57] scsi: target: pscsi: Fix warning in pscsi_complete_cmd() Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 08/57] media: ite-cir: check for receive overflow Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 09/57] media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 10/57] media: imx: capture: Return -EPIPE from __capture_legacy_try_fmt() Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 11/57] power: supply: bq27xxx: fix power_avg for newer ICs Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 12/57] extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 13/57] extcon: arizona: Fix various races on driver unbind Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 14/57] media: media/saa7164: fix saa7164_encoder_register() memory leak bugs Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 15/57] media: gspca/sq905.c: fix uninitialized variable Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 16/57] media: pci: saa7164: Rudimentary spelling fixes in the file saa7164-types.h Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 17/57] power: supply: Use IRQF_ONESHOT Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 18/57] drm/bridge/analogix/anx78xx: Setup encoder before registering connector Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 19/57] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 20/57] drm/amdgpu: mask the xgmi number of hops reported from psp to kfd Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 21/57] drm/amdkfd: Fix UBSAN shift-out-of-bounds warning Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 22/57] drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4f Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 23/57] drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool' Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 24/57] drm/amd/display: fix dml prefetch validation Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 25/57] scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 26/57] drm/vkms: fix misuse of WARN_ON Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 27/57] scsi: qla2xxx: Fix use after free in bsg Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 28/57] mmc: sdhci-pci: Add PCI IDs for Intel LKF Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 29/57] ata: ahci: Disable SXS for Hisilicon Kunpeng920 Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 30/57] scsi: smartpqi: Correct request leakage during reset operations Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 31/57] scsi: smartpqi: Add new PCI IDs Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 32/57] scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 33/57] media: em28xx: fix memory leak Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 34/57] media: vivid: update EDID Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 35/57] clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 36/57] power: supply: generic-adc-battery: fix possible use-after-free in gab_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 37/57] power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 38/57] media: tc358743: fix possible use-after-free in tc358743_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 39/57] media: adv7604: fix possible use-after-free in adv76xx_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 40/57] media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 41/57] media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 42/57] media: i2c: adv7842: fix possible use-after-free in adv7842_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 43/57] media: platform: sti: Fix runtime PM imbalance in regs_show Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 44/57] media: dvb-usb: fix memory leak in dvb_usb_adapter_init Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 45/57] media: gscpa/stv06xx: fix memory leak Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 46/57] sched/fair: Ignore percpu threads for imbalance pulls Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 47/57] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 48/57] drm/msm/mdp5: Do not multiply vclk line count by 100 Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 49/57] drm/amdkfd: Fix cat debugfs hang_hws file causes system crash bug Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 50/57] amdgpu: avoid incorrect %hu format string Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 51/57] drm/amdgpu: fix NULL pointer dereference Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 52/57] scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response Sasha Levin
2021-05-03 16:39 ` Sasha Levin [this message]
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 54/57] scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 55/57] mfd: arizona: Fix rumtime PM imbalance on error Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 56/57] scsi: libfc: Fix a format specifier Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 57/57] s390/archrandom: add parameter check for s390_arch_random_generate Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210503163941.2853291-53-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=jsmart2021@gmail.com \
    --cc=justin.tee@broadcom.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).