[PATCH 4.19 00/15] 4.19.190-rc1 review

[PATCH 4.19 00/15] 4.19.190-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.190 release.
There are 15 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.190-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.190-rc1

Miklos Szeredi <mszeredi@redhat.com>
    ovl: allow upperdir inside lowerdir

Mark Pearson <markpearson@lenovo.com>
    platform/x86: thinkpad_acpi: Correct thermal sensor allocation

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: ak5558: Add MODULE_DEVICE_TABLE

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: ak4458: Add MODULE_DEVICE_TABLE

Chris Chiu <chris.chiu@canonical.com>
    USB: Add reset-resume quirk for WD19's Realtek Hub

Kai-Heng Feng <kai.heng.feng@canonical.com>
    USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX

Jiri Kosina <jkosina@suse.cz>
    iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Fix masking negation logic upon negative dst register

Romain Naour <romain.naour@gmail.com>
    mips: Do not include hi and lo in clobber list for R6

Jiri Kosina <jkosina@suse.cz>
    iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()

Phillip Potter <phil@philpotter.co.uk>
    net: usb: ax88179_178a: initialize local variables before use

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: tables: x86: Reserve memory occupied by ACPI tables

Gao Xiang <hsiangkao@redhat.com>
    erofs: fix extended inode could cross boundary


-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/mips/vdso/gettimeofday.c                     |  14 ++-
 arch/x86/kernel/acpi/boot.c                       |  25 ++--
 arch/x86/kernel/setup.c                           |   7 +-
 drivers/acpi/tables.c                             |  42 ++++++-
 drivers/net/usb/ax88179_178a.c                    |   4 +-
 drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c |   7 +-
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c      |   7 +-
 drivers/platform/x86/thinkpad_acpi.c              |  31 +++--
 drivers/staging/erofs/inode.c                     | 135 ++++++++++++++--------
 drivers/usb/core/quirks.c                         |   4 +
 fs/overlayfs/super.c                              |  12 +-
 include/linux/acpi.h                              |   9 +-
 kernel/bpf/verifier.c                             |  12 +-
 sound/soc/codecs/ak4458.c                         |   1 +
 sound/soc/codecs/ak5558.c                         |   1 +
 sound/usb/quirks-table.h                          |  10 ++
 17 files changed, 224 insertions(+), 101 deletions(-)

[PATCH 4.19 01/15] erofs: fix extended inode could cross boundary

[Greg Kroah-Hartman]

From: Gao Xiang <hsiangkao@redhat.com>

commit 0dcd3c94e02438f4a571690e26f4ee997524102a upstream.

Each ondisk inode should be aligned with inode slot boundary
(32-byte alignment) because of nid calculation formula, so all
compact inodes (32 byte) cannot across page boundary. However,
extended inode is now 64-byte form, which can across page boundary
in principle if the location is specified on purpose, although
it's hard to be generated by mkfs due to the allocation policy
and rarely used by Android use case now mainly for > 4GiB files.

For now, only two fields `i_ctime_nsec` and `i_nlink' couldn't
be read from disk properly and cause out-of-bound memory read
with random value.

Let's fix now.

Fixes: 431339ba9042 ("staging: erofs: add inode operations")
Cc: <stable@vger.kernel.org> # 4.19+
Link: https://lore.kernel.org/r/20200729175801.GA23973@xiangao.remote.csb
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
[ Gao Xiang: resolve non-trivial conflicts for latest 4.19.y. ]
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/erofs/inode.c |  135 ++++++++++++++++++++++++++++--------------
 1 file changed, 90 insertions(+), 45 deletions(-)

--- a/drivers/staging/erofs/inode.c
+++ b/drivers/staging/erofs/inode.c
@@ -14,26 +14,78 @@
 
 #include <trace/events/erofs.h>
 
-/* no locking */
-static int read_inode(struct inode *inode, void *data)
+/*
+ * if inode is successfully read, return its inode page (or sometimes
+ * the inode payload page if it's an extended inode) in order to fill
+ * inline data if possible.
+ */
+static struct page *read_inode(struct inode *inode, unsigned int *ofs)
 {
+	struct super_block *sb = inode->i_sb;
+	struct erofs_sb_info *sbi = EROFS_SB(sb);
 	struct erofs_vnode *vi = EROFS_V(inode);
-	struct erofs_inode_v1 *v1 = data;
-	const unsigned advise = le16_to_cpu(v1->i_advise);
+	const erofs_off_t inode_loc = iloc(sbi, vi->nid);
+	erofs_blk_t blkaddr;
+	struct page *page;
+	struct erofs_inode_v1 *v1;
+	struct erofs_inode_v2 *v2, *copied = NULL;
+	unsigned int ifmt;
+	int err;
+
+	blkaddr = erofs_blknr(inode_loc);
+	*ofs = erofs_blkoff(inode_loc);
+
+	debugln("%s, reading inode nid %llu at %u of blkaddr %u",
+		__func__, vi->nid, *ofs, blkaddr);
 
-	vi->data_mapping_mode = __inode_data_mapping(advise);
+	page = erofs_get_meta_page(sb, blkaddr, false);
+	if (IS_ERR(page)) {
+		errln("failed to get inode (nid: %llu) page, err %ld",
+		      vi->nid, PTR_ERR(page));
+		return page;
+	}
+
+	v1 = page_address(page) + *ofs;
+	ifmt = le16_to_cpu(v1->i_advise);
 
+	vi->data_mapping_mode = __inode_data_mapping(ifmt);
 	if (unlikely(vi->data_mapping_mode >= EROFS_INODE_LAYOUT_MAX)) {
 		errln("unknown data mapping mode %u of nid %llu",
 			vi->data_mapping_mode, vi->nid);
-		DBG_BUGON(1);
-		return -EIO;
+		err = -EOPNOTSUPP;
+		goto err_out;
 	}
 
-	if (__inode_version(advise) == EROFS_INODE_LAYOUT_V2) {
-		struct erofs_inode_v2 *v2 = data;
-
+	switch (__inode_version(ifmt)) {
+	case EROFS_INODE_LAYOUT_V2:
 		vi->inode_isize = sizeof(struct erofs_inode_v2);
+		/* check if the inode acrosses page boundary */
+		if (*ofs + vi->inode_isize <= PAGE_SIZE) {
+			*ofs += vi->inode_isize;
+			v2 = (struct erofs_inode_v2 *)v1;
+		} else {
+			const unsigned int gotten = PAGE_SIZE - *ofs;
+
+			copied = kmalloc(vi->inode_isize, GFP_NOFS);
+			if (!copied) {
+				err = -ENOMEM;
+				goto err_out;
+			}
+			memcpy(copied, v1, gotten);
+			unlock_page(page);
+			put_page(page);
+
+			page = erofs_get_meta_page(sb, blkaddr + 1, false);
+			if (IS_ERR(page)) {
+				errln("failed to get inode payload page (nid: %llu), err %ld",
+				      vi->nid, PTR_ERR(page));
+				kfree(copied);
+				return page;
+			}
+			*ofs = vi->inode_isize - gotten;
+			memcpy((u8 *)copied + gotten, page_address(page), *ofs);
+			v2 = copied;
+		}
 		vi->xattr_isize = ondisk_xattr_ibody_size(v2->i_xattr_icount);
 
 		inode->i_mode = le16_to_cpu(v2->i_mode);
@@ -46,7 +98,7 @@ static int read_inode(struct inode *inod
 		} else if (S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
 			inode->i_rdev = 0;
 		} else {
-			return -EIO;
+			goto bogusimode;
 		}
 
 		i_uid_write(inode, le32_to_cpu(v2->i_uid));
@@ -58,10 +110,11 @@ static int read_inode(struct inode *inod
 		inode->i_ctime.tv_nsec = le32_to_cpu(v2->i_ctime_nsec);
 
 		inode->i_size = le64_to_cpu(v2->i_size);
-	} else if (__inode_version(advise) == EROFS_INODE_LAYOUT_V1) {
-		struct erofs_sb_info *sbi = EROFS_SB(inode->i_sb);
-
+		kfree(copied);
+		break;
+	case EROFS_INODE_LAYOUT_V1:
 		vi->inode_isize = sizeof(struct erofs_inode_v1);
+		*ofs += vi->inode_isize;
 		vi->xattr_isize = ondisk_xattr_ibody_size(v1->i_xattr_icount);
 
 		inode->i_mode = le16_to_cpu(v1->i_mode);
@@ -74,7 +127,7 @@ static int read_inode(struct inode *inod
 		} else if (S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
 			inode->i_rdev = 0;
 		} else {
-			return -EIO;
+			goto bogusimode;
 		}
 
 		i_uid_write(inode, le16_to_cpu(v1->i_uid));
@@ -86,11 +139,12 @@ static int read_inode(struct inode *inod
 		inode->i_ctime.tv_nsec = sbi->build_time_nsec;
 
 		inode->i_size = le32_to_cpu(v1->i_size);
-	} else {
+		break;
+	default:
 		errln("unsupported on-disk inode version %u of nid %llu",
-			__inode_version(advise), vi->nid);
-		DBG_BUGON(1);
-		return -EIO;
+		      __inode_version(ifmt), vi->nid);
+		err = -EOPNOTSUPP;
+		goto err_out;
 	}
 
 	inode->i_mtime.tv_sec = inode->i_ctime.tv_sec;
@@ -100,7 +154,16 @@ static int read_inode(struct inode *inod
 
 	/* measure inode.i_blocks as the generic filesystem */
 	inode->i_blocks = ((inode->i_size - 1) >> 9) + 1;
-	return 0;
+	return page;
+bogusimode:
+	errln("bogus i_mode (%o) @ nid %llu", inode->i_mode, vi->nid);
+	err = -EIO;
+err_out:
+	DBG_BUGON(1);
+	kfree(copied);
+	unlock_page(page);
+	put_page(page);
+	return ERR_PTR(err);
 }
 
 /*
@@ -132,7 +195,7 @@ static int fill_inline_data(struct inode
 		if (unlikely(lnk == NULL))
 			return -ENOMEM;
 
-		m_pofs += vi->inode_isize + vi->xattr_isize;
+		m_pofs += vi->xattr_isize;
 
 		/* inline symlink data shouldn't across page boundary as well */
 		if (unlikely(m_pofs + inode->i_size > PAGE_SIZE)) {
@@ -153,35 +216,17 @@ static int fill_inline_data(struct inode
 
 static int fill_inode(struct inode *inode, int isdir)
 {
-	struct erofs_sb_info *sbi = EROFS_SB(inode->i_sb);
-	struct erofs_vnode *vi = EROFS_V(inode);
 	struct page *page;
-	void *data;
-	int err;
-	erofs_blk_t blkaddr;
-	unsigned ofs;
+	unsigned int ofs;
+	int err = 0;
 
 	trace_erofs_fill_inode(inode, isdir);
 
-	blkaddr = erofs_blknr(iloc(sbi, vi->nid));
-	ofs = erofs_blkoff(iloc(sbi, vi->nid));
-
-	debugln("%s, reading inode nid %llu at %u of blkaddr %u",
-		__func__, vi->nid, ofs, blkaddr);
-
-	page = erofs_get_meta_page(inode->i_sb, blkaddr, isdir);
-
+	/* read inode base data from disk */
+	page = read_inode(inode, &ofs);
 	if (IS_ERR(page)) {
-		errln("failed to get inode (nid: %llu) page, err %ld",
-			vi->nid, PTR_ERR(page));
 		return PTR_ERR(page);
-	}
-
-	DBG_BUGON(!PageUptodate(page));
-	data = page_address(page);
-
-	err = read_inode(inode, data + ofs);
-	if (!err) {
+	} else {
 		/* setup the new inode */
 		if (S_ISREG(inode->i_mode)) {
 #ifdef CONFIG_EROFS_FS_XATTR
@@ -229,7 +274,7 @@ static int fill_inode(struct inode *inod
 		inode->i_mapping->a_ops = &erofs_raw_access_aops;
 
 		/* fill last page if inline data is available */
-		fill_inline_data(inode, data, ofs);
+		fill_inline_data(inode, page_address(page), ofs);
 	}
 
 out_unlock:

[PATCH 4.19 02/15] ACPI: tables: x86: Reserve memory occupied by ACPI tables

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream.

The following problem has been reported by George Kennedy:

 Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
 in __free_pages_core()") the following use after free occurs
 intermittently when ACPI tables are accessed.

 BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
 Read of size 4 at addr ffff8880be453004 by task swapper/0/1
 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
 Call Trace:
  dump_stack+0xf6/0x158
  print_address_description.constprop.9+0x41/0x60
  kasan_report.cold.14+0x7b/0xd4
  __asan_report_load_n_noabort+0xf/0x20
  ibft_init+0x134/0xc49
  do_one_initcall+0xc4/0x3e0
  kernel_init_freeable+0x5af/0x66b
  kernel_init+0x16/0x1d0
  ret_from_fork+0x22/0x30

 ACPI tables mapped via kmap() do not have their mapped pages
 reserved and the pages can be "stolen" by the buddy allocator.

Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.

In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.

The other architectures using ACPI should not be affected by this
change.

Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/acpi/boot.c |   25 ++++++++++++-------------
 arch/x86/kernel/setup.c     |    8 +++-----
 drivers/acpi/tables.c       |   42 +++++++++++++++++++++++++++++++++++++++---
 include/linux/acpi.h        |    9 ++++++++-
 4 files changed, 62 insertions(+), 22 deletions(-)

--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1565,10 +1565,18 @@ void __init acpi_boot_table_init(void)
 	/*
 	 * Initialize the ACPI boot-time table parser.
 	 */
-	if (acpi_table_init()) {
+	if (acpi_locate_initial_tables())
 		disable_acpi();
-		return;
-	}
+	else
+		acpi_reserve_initial_tables();
+}
+
+int __init early_acpi_boot_init(void)
+{
+	if (acpi_disabled)
+		return 1;
+
+	acpi_table_init_complete();
 
 	acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
 
@@ -1581,18 +1589,9 @@ void __init acpi_boot_table_init(void)
 		} else {
 			printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
 			disable_acpi();
-			return;
+			return 1;
 		}
 	}
-}
-
-int __init early_acpi_boot_init(void)
-{
-	/*
-	 * If acpi_disabled, bail out
-	 */
-	if (acpi_disabled)
-		return 1;
 
 	/*
 	 * Process the Multiple APIC Description Table (MADT), if present
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1097,6 +1097,9 @@ void __init setup_arch(char **cmdline_p)
 
 	cleanup_highmap();
 
+	/* Look for ACPI tables and reserve memory occupied by them. */
+	acpi_boot_table_init();
+
 	memblock_set_current_limit(ISA_END_ADDRESS);
 	e820__memblock_setup();
 
@@ -1183,11 +1186,6 @@ void __init setup_arch(char **cmdline_p)
 
 	early_platform_quirks();
 
-	/*
-	 * Parse the ACPI tables for possible boot-time SMP configuration.
-	 */
-	acpi_boot_table_init();
-
 	early_acpi_boot_init();
 
 	initmem_init();
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -732,7 +732,7 @@ acpi_os_table_override(struct acpi_table
 }
 
 /*
- * acpi_table_init()
+ * acpi_locate_initial_tables()
  *
  * find RSDP, find and checksum SDT/XSDT.
  * checksum all tables, print SDT/XSDT
@@ -740,7 +740,7 @@ acpi_os_table_override(struct acpi_table
  * result: sdt_entry[] is initialized
  */
 
-int __init acpi_table_init(void)
+int __init acpi_locate_initial_tables(void)
 {
 	acpi_status status;
 
@@ -755,9 +755,45 @@ int __init acpi_table_init(void)
 	status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
 	if (ACPI_FAILURE(status))
 		return -EINVAL;
-	acpi_table_initrd_scan();
 
+	return 0;
+}
+
+void __init acpi_reserve_initial_tables(void)
+{
+	int i;
+
+	for (i = 0; i < ACPI_MAX_TABLES; i++) {
+		struct acpi_table_desc *table_desc = &initial_tables[i];
+		u64 start = table_desc->address;
+		u64 size = table_desc->length;
+
+		if (!start || !size)
+			break;
+
+		pr_info("Reserving %4s table memory at [mem 0x%llx-0x%llx]\n",
+			table_desc->signature.ascii, start, start + size - 1);
+
+		memblock_reserve(start, size);
+	}
+}
+
+void __init acpi_table_init_complete(void)
+{
+	acpi_table_initrd_scan();
 	check_multiple_madt();
+}
+
+int __init acpi_table_init(void)
+{
+	int ret;
+
+	ret = acpi_locate_initial_tables();
+	if (ret)
+		return ret;
+
+	acpi_table_init_complete();
+
 	return 0;
 }
 
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -230,10 +230,14 @@ void __iomem *__acpi_map_table(unsigned
 void __acpi_unmap_table(void __iomem *map, unsigned long size);
 int early_acpi_boot_init(void);
 int acpi_boot_init (void);
+void acpi_boot_table_prepare (void);
 void acpi_boot_table_init (void);
 int acpi_mps_check (void);
 int acpi_numa_init (void);
 
+int acpi_locate_initial_tables (void);
+void acpi_reserve_initial_tables (void);
+void acpi_table_init_complete (void);
 int acpi_table_init (void);
 int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
 int __init acpi_table_parse_entries(char *id, unsigned long table_size,
@@ -734,9 +738,12 @@ static inline int acpi_boot_init(void)
 	return 0;
 }
 
+static inline void acpi_boot_table_prepare(void)
+{
+}
+
 static inline void acpi_boot_table_init(void)
 {
-	return;
 }
 
 static inline int acpi_mps_check(void)

[PATCH 4.19 03/15] ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 6998a8800d73116187aad542391ce3b2dd0f9e30 upstream.

Commit 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by
ACPI tables") attempted to address an issue with reserving the memory
occupied by ACPI tables, but it broke the initrd-based table override
mechanism relied on by multiple users.

To restore the initrd-based ACPI table override functionality, move
the acpi_boot_table_init() invocation in setup_arch() on x86 after
the acpi_table_upgrade() one.

Fixes: 1a1c130ab757 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/setup.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1097,9 +1097,6 @@ void __init setup_arch(char **cmdline_p)
 
 	cleanup_highmap();
 
-	/* Look for ACPI tables and reserve memory occupied by them. */
-	acpi_boot_table_init();
-
 	memblock_set_current_limit(ISA_END_ADDRESS);
 	e820__memblock_setup();
 
@@ -1179,6 +1176,8 @@ void __init setup_arch(char **cmdline_p)
 	reserve_initrd();
 
 	acpi_table_upgrade();
+	/* Look for ACPI tables and reserve memory occupied by them. */
+	acpi_boot_table_init();
 
 	vsmp_init();
 

[PATCH 4.19 04/15] net: usb: ax88179_178a: initialize local variables before use

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit bd78980be1a68d14524c51c4b4170782fada622b upstream.

Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and
also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug
reported by syzbot at:
https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa

Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ax88179_178a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -307,12 +307,12 @@ static int ax88179_read_cmd(struct usbne
 	int ret;
 
 	if (2 == size) {
-		u16 buf;
+		u16 buf = 0;
 		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
 		le16_to_cpus(&buf);
 		*((u16 *)data) = buf;
 	} else if (4 == size) {
-		u32 buf;
+		u32 buf = 0;
 		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
 		le32_to_cpus(&buf);
 		*((u32 *)data) = buf;

[PATCH 4.19 05/15] iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()

[Greg Kroah-Hartman]

From: Jiri Kosina <jkosina@suse.cz>

commit 2800aadc18a64c96b051bcb7da8a7df7d505db3f upstream.

It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs
disabled (e.g. from LED core). We can't enable BHs in such a situation.

Turn the unconditional BH-enable/BH-disable code into
hardirq-disable/conditional-enable.

This fixes the warning below.

 WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0
 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7
 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0
 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e
 RSP: 0018:ffffafd580b13298 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389
 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000
 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000
 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001
 FS:  00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0
 Call Trace:
  ? _raw_spin_unlock_bh+0x1f/0x30
  iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
  iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi]
  iwl_trans_send_cmd+0x88/0x170 [iwlwifi]
  ? lock_acquire+0x277/0x3d0
  iwl_mvm_send_cmd+0x32/0x80 [iwlmvm]
  iwl_mvm_led_set+0xc2/0xe0 [iwlmvm]
  ? led_trigger_event+0x46/0x70
  led_trigger_event+0x46/0x70
  ieee80211_do_open+0x5c5/0xa20 [mac80211]
  ieee80211_open+0x67/0x90 [mac80211]
  __dev_open+0xd4/0x150
  __dev_change_flags+0x19e/0x1f0
  dev_change_flags+0x23/0x60
  do_setlink+0x30d/0x1230
  ? lock_is_held_type+0xb4/0x120
  ? __nla_validate_parse.part.7+0x57/0xcb0
  ? __lock_acquire+0x2e1/0x1a50
  __rtnl_newlink+0x560/0x910
  ? __lock_acquire+0x2e1/0x1a50
  ? __lock_acquire+0x2e1/0x1a50
  ? lock_acquire+0x277/0x3d0
  ? sock_def_readable+0x5/0x290
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? sock_def_readable+0xb3/0x290
  ? lock_release+0x166/0x2a0
  ? lock_is_held_type+0x90/0x120
  rtnl_newlink+0x47/0x70
  rtnetlink_rcv_msg+0x25c/0x470
  ? netlink_deliver_tap+0x97/0x3e0
  ? validate_linkmsg+0x350/0x350
  netlink_rcv_skb+0x50/0x100
  netlink_unicast+0x1b2/0x280
  netlink_sendmsg+0x336/0x450
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x1ed/0x250
  ? copy_msghdr_from_user+0x5c/0x90
  ___sys_sendmsg+0x88/0xd0
  ? lock_is_held_type+0xb4/0x120
  ? find_held_lock+0x2d/0x90
  ? lock_release+0x166/0x2a0
  ? __fget_files+0xfe/0x1d0
  ? __sys_sendmsg+0x5e/0xa0
  __sys_sendmsg+0x5e/0xa0
  ? lockdep_hardirqs_on_prepare+0xd9/0x170
  do_syscall_64+0x33/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc605c9572d
 Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48
 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d
 RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c
 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000
 irq event stamp: 170785
 hardirqs last  enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0
 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90
 softirqs last  enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
 softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi]

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm
Signed-off-by: Jari Ruusu <jariruusu@protonmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -1495,6 +1495,7 @@ static int iwl_pcie_enqueue_hcmd(struct
 	u32 cmd_pos;
 	const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
 	u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
+	unsigned long flags2;
 
 	if (WARN(!trans->wide_cmd_header &&
 		 group_id > IWL_ALWAYS_LONG_GROUP,
@@ -1578,10 +1579,10 @@ static int iwl_pcie_enqueue_hcmd(struct
 		goto free_dup_buf;
 	}
 
-	spin_lock_bh(&txq->lock);
+	spin_lock_irqsave(&txq->lock, flags2);
 
 	if (iwl_queue_space(trans, txq) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
-		spin_unlock_bh(&txq->lock);
+		spin_unlock_irqrestore(&txq->lock, flags2);
 
 		IWL_ERR(trans, "No space in command queue\n");
 		iwl_op_mode_cmd_queue_full(trans->op_mode);
@@ -1742,7 +1743,7 @@ static int iwl_pcie_enqueue_hcmd(struct
 	spin_unlock_irqrestore(&trans_pcie->reg_lock, flags);
 
  out:
-	spin_unlock_bh(&txq->lock);
+	spin_unlock_irqrestore(&txq->lock, flags2);
  free_dup_buf:
 	if (idx < 0)
 		kfree(dup_buf);

[PATCH 4.19 06/15] mips: Do not include hi and lo in clobber list for R6

[Greg Kroah-Hartman]

From: Romain Naour <romain.naour@gmail.com>

commit 1d7ba0165d8206ac073f7ac3b14fc0836b66eae7 upstream

>From [1]
"GCC 10 (PR 91233) won't silently allow registers that are not
architecturally available to be present in the clobber list anymore,
resulting in build failure for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
  146 |  __asm__ volatile (      \
      |  ^~~~~~~

This is because base R6 ISA doesn't define hi and lo registers w/o DSP
extension. This patch provides the alternative clobber list for r6 targets
that won't include those registers."

Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to
build for mips r6 cpus with gcc 10 for the same reason as glibc.

[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8
[2] '24640f233b46 ("mips: Add support for generic vDSO")'

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/vdso/gettimeofday.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/arch/mips/vdso/gettimeofday.c
+++ b/arch/mips/vdso/gettimeofday.c
@@ -18,6 +18,12 @@
 #include <asm/unistd.h>
 #include <asm/vdso.h>
 
+#if MIPS_ISA_REV < 6
+#define VDSO_SYSCALL_CLOBBERS "hi", "lo",
+#else
+#define VDSO_SYSCALL_CLOBBERS
+#endif
+
 #ifdef CONFIG_MIPS_CLOCK_VSYSCALL
 
 static __always_inline long gettimeofday_fallback(struct timeval *_tv,
@@ -34,7 +40,9 @@ static __always_inline long gettimeofday
 	: "=r" (ret), "=r" (error)
 	: "r" (tv), "r" (tz), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }
@@ -55,7 +63,9 @@ static __always_inline long clock_gettim
 	: "=r" (ret), "=r" (error)
 	: "r" (clkid), "r" (ts), "r" (nr)
 	: "$1", "$3", "$8", "$9", "$10", "$11", "$12", "$13",
-	  "$14", "$15", "$24", "$25", "hi", "lo", "memory");
+	  "$14", "$15", "$24", "$25",
+	  VDSO_SYSCALL_CLOBBERS
+	  "memory");
 
 	return error ? -ret : ret;
 }

[PATCH 4.19 07/15] bpf: Fix masking negation logic upon negative dst register

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit b9b34ddbe2076ade359cd5ce7537d5ed019e9807 upstream.

The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6099,14 +6099,10 @@ static int fixup_bpf_calls(struct bpf_ve
 			*patch++ = BPF_ALU64_REG(BPF_OR, BPF_REG_AX, off_reg);
 			*patch++ = BPF_ALU64_IMM(BPF_NEG, BPF_REG_AX, 0);
 			*patch++ = BPF_ALU64_IMM(BPF_ARSH, BPF_REG_AX, 63);
-			if (issrc) {
-				*patch++ = BPF_ALU64_REG(BPF_AND, BPF_REG_AX,
-							 off_reg);
-				insn->src_reg = BPF_REG_AX;
-			} else {
-				*patch++ = BPF_ALU64_REG(BPF_AND, off_reg,
-							 BPF_REG_AX);
-			}
+			*patch++ = BPF_ALU64_REG(BPF_AND, BPF_REG_AX, off_reg);
+			if (!issrc)
+				*patch++ = BPF_MOV64_REG(insn->dst_reg, insn->src_reg);
+			insn->src_reg = BPF_REG_AX;
 			if (isneg)
 				insn->code = insn->code == code_add ?
 					     code_sub : code_add;

[PATCH 4.19 08/15] iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()

[Greg Kroah-Hartman]

From: Jiri Kosina <jkosina@suse.cz>

commit e7020bb068d8be50a92f48e36b236a1a1ef9282e upstream.

Analogically to what we did in 2800aadc18a6 ("iwlwifi: Fix softirq/hardirq
disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to
iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same
contexts.

Reported-by: Heiner Kallweit <hkallweit1@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
Signed-off-by: Jari Ruusu <jariruusu@protonmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
@@ -654,6 +654,7 @@ static int iwl_pcie_gen2_enqueue_hcmd(st
 	const u8 *cmddata[IWL_MAX_CMD_TBS_PER_TFD];
 	u16 cmdlen[IWL_MAX_CMD_TBS_PER_TFD];
 	struct iwl_tfh_tfd *tfd;
+	unsigned long flags2;
 
 	copy_size = sizeof(struct iwl_cmd_header_wide);
 	cmd_size = sizeof(struct iwl_cmd_header_wide);
@@ -722,14 +723,14 @@ static int iwl_pcie_gen2_enqueue_hcmd(st
 		goto free_dup_buf;
 	}
 
-	spin_lock_bh(&txq->lock);
+	spin_lock_irqsave(&txq->lock, flags2);
 
 	idx = iwl_pcie_get_cmd_index(txq, txq->write_ptr);
 	tfd = iwl_pcie_get_tfd(trans, txq, txq->write_ptr);
 	memset(tfd, 0, sizeof(*tfd));
 
 	if (iwl_queue_space(trans, txq) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
-		spin_unlock_bh(&txq->lock);
+		spin_unlock_irqrestore(&txq->lock, flags2);
 
 		IWL_ERR(trans, "No space in command queue\n");
 		iwl_op_mode_cmd_queue_full(trans->op_mode);
@@ -870,7 +871,7 @@ static int iwl_pcie_gen2_enqueue_hcmd(st
 	spin_unlock_irqrestore(&trans_pcie->reg_lock, flags);
 
 out:
-	spin_unlock_bh(&txq->lock);
+	spin_unlock_irqrestore(&txq->lock, flags2);
 free_dup_buf:
 	if (idx < 0)
 		kfree(dup_buf);

[PATCH 4.19 09/15] ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 64f40f9be14106e7df0098c427cb60be645bddb7 upstream.

ToneLab EX guitar pedal device requires the same quirk like ToneLab ST
for supporting the MIDI.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2499,6 +2499,16 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
+{
+	USB_DEVICE_VENDOR_SPEC(0x0944, 0x0204),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "KORG, Inc.",
+		/* .product_name = "ToneLab EX", */
+		.ifnum = 3,
+		.type = QUIRK_MIDI_STANDARD_INTERFACE,
+	}
+},
+
 /* AKAI devices */
 {
 	USB_DEVICE(0x09e8, 0x0062),

[PATCH 4.19 10/15] USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream.

This is another branded 8153 device that doesn't work well with LPM
enabled:
[ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71

So disable LPM to resolve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1922651
Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -438,6 +438,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },
 
+	/* Lenovo ThinkPad USB-C Dock Gen2 Ethernet (RTL8153 GigE) */
+	{ USB_DEVICE(0x17ef, 0xa387), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* BUILDWIN Photo Frame */
 	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
 			USB_QUIRK_HONOR_BNUMINTERFACES },

[PATCH 4.19 11/15] USB: Add reset-resume quirk for WD19s Realtek Hub

[Greg Kroah-Hartman]

From: Chris Chiu <chris.chiu@canonical.com>

commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream.

Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work
after the system resumes from suspend with remote wakeup enabled
device connected:
[ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71)
[ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71)

Information of this hub:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480  MxCh= 5
D:  Ver= 2.10 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=5487 Rev= 1.47
S:  Manufacturer=Dell Inc.
S:  Product=Dell dock
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

The failure results from the ETIMEDOUT by chance when turning on
the suspend feature for the specified port of the hub. The port
seems to be in an unknown state so the hub_activate during resume
fails the hub_port_status, then the hub will fail to work.

The quirky hub needs the reset-resume quirk to function correctly.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -406,6 +406,7 @@ static const struct usb_device_id usb_qu
 
 	/* Realtek hub in Dell WD19 (Type-C) */
 	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+	{ USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },
 
 	/* Generic RTL8153 based ethernet adapters */
 	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },

[PATCH 4.19 12/15] ASoC: ak4458: Add MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

commit f84b4524005238fc9fd5cf615bb426fa40a99494 upstream.

Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.

Fixes: 08660086eff9 ("ASoC: ak4458: Add support for AK4458 DAC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/ak4458.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/ak4458.c
+++ b/sound/soc/codecs/ak4458.c
@@ -653,6 +653,7 @@ static struct i2c_driver ak4458_i2c_driv
 	.probe_new = ak4458_i2c_probe,
 	.remove = ak4458_i2c_remove,
 };
+MODULE_DEVICE_TABLE(of, ak4458_of_match);
 
 module_i2c_driver(ak4458_i2c_driver);
 

[PATCH 4.19 13/15] ASoC: ak5558: Add MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

commit 741c8397e5d0b339fb3e614a9ff5cb4bf7ae1a65 upstream.

Add missed MODULE_DEVICE_TABLE for the driver can be loaded
automatically at boot.

Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614149872-25510-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/ak5558.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/ak5558.c
+++ b/sound/soc/codecs/ak5558.c
@@ -407,6 +407,7 @@ static struct i2c_driver ak5558_i2c_driv
 	.probe_new = ak5558_i2c_probe,
 	.remove = ak5558_i2c_remove,
 };
+MODULE_DEVICE_TABLE(of, ak5558_i2c_dt_ids);
 
 module_i2c_driver(ak5558_i2c_driver);
 

[PATCH 4.19 14/15] platform/x86: thinkpad_acpi: Correct thermal sensor allocation

[Greg Kroah-Hartman]

From: Mark Pearson <markpearson@lenovo.com>

commit 6759e18e5cd8745a5dfc5726e4a3db5281ec1639 upstream.

On recent Thinkpad platforms it was reported that temp sensor 11 was
always incorrectly displaying 66C. It turns out the reason for this is
that this location in EC RAM is not a temperature sensor but is the
power supply ID (offset 0xC2).

Based on feedback from the Lenovo firmware team the EC RAM version can
be determined and for the current version (3) only the 0x78 to 0x7F
range is used for temp sensors. I don't have any details for earlier
versions so I have left the implementation unaltered there.

Note - in this block only 0x78 and 0x79 are officially designated (CPU &
GPU sensors). The use of the other locations in the block will vary from
platform to platform; but the existing logic to detect a sensor presence
holds.

Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/thinkpad_acpi.c |   31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6300,6 +6300,7 @@ enum thermal_access_mode {
 enum { /* TPACPI_THERMAL_TPEC_* */
 	TP_EC_THERMAL_TMP0 = 0x78,	/* ACPI EC regs TMP 0..7 */
 	TP_EC_THERMAL_TMP8 = 0xC0,	/* ACPI EC regs TMP 8..15 */
+	TP_EC_FUNCREV      = 0xEF,      /* ACPI EC Functional revision */
 	TP_EC_THERMAL_TMP_NA = -128,	/* ACPI EC sensor not available */
 
 	TPACPI_THERMAL_SENSOR_NA = -128000, /* Sensor not available */
@@ -6498,7 +6499,7 @@ static const struct attribute_group ther
 
 static int __init thermal_init(struct ibm_init_struct *iibm)
 {
-	u8 t, ta1, ta2;
+	u8 t, ta1, ta2, ver = 0;
 	int i;
 	int acpi_tmp7;
 	int res;
@@ -6513,7 +6514,14 @@ static int __init thermal_init(struct ib
 		 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
 		 * non-implemented, thermal sensors return 0x80 when
 		 * not available
+		 * The above rule is unfortunately flawed. This has been seen with
+		 * 0xC2 (power supply ID) causing thermal control problems.
+		 * The EC version can be determined by offset 0xEF and at least for
+		 * version 3 the Lenovo firmware team confirmed that registers 0xC0-0xC7
+		 * are not thermal registers.
 		 */
+		if (!acpi_ec_read(TP_EC_FUNCREV, &ver))
+			pr_warn("Thinkpad ACPI EC unable to access EC version\n");
 
 		ta1 = ta2 = 0;
 		for (i = 0; i < 8; i++) {
@@ -6523,11 +6531,13 @@ static int __init thermal_init(struct ib
 				ta1 = 0;
 				break;
 			}
-			if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
-				ta2 |= t;
-			} else {
-				ta1 = 0;
-				break;
+			if (ver < 3) {
+				if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+					ta2 |= t;
+				} else {
+					ta1 = 0;
+					break;
+				}
 			}
 		}
 		if (ta1 == 0) {
@@ -6540,9 +6550,12 @@ static int __init thermal_init(struct ib
 				thermal_read_mode = TPACPI_THERMAL_NONE;
 			}
 		} else {
-			thermal_read_mode =
-			    (ta2 != 0) ?
-			    TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+			if (ver >= 3)
+				thermal_read_mode = TPACPI_THERMAL_TPEC_8;
+			else
+				thermal_read_mode =
+					(ta2 != 0) ?
+					TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
 		}
 	} else if (acpi_tmp7) {
 		if (tpacpi_is_ibm() &&

[PATCH 4.19 15/15] ovl: allow upperdir inside lowerdir

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 708fa01597fa002599756bf56a96d0de1677375c upstream.

Commit 146d62e5a586 ("ovl: detect overlapping layers") made sure we don't
have overlapping layers, but it also broke the arguably valid use case of

 mount -olowerdir=/,upperdir=/subdir,..

where upperdir overlaps lowerdir on the same filesystem.  This has been
causing regressions.

Revert the check, but only for the specific case where upperdir and/or
workdir are subdirectories of lowerdir.  Any other overlap (e.g. lowerdir
is subdirectory of upperdir, etc) case is crazy, so leave the check in
place for those.

Overlaps are detected at lookup time too, so reverting the mount time check
should be safe.

Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/super.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -1479,7 +1479,8 @@ out_err:
  * - upper/work dir of any overlayfs instance
  */
 static int ovl_check_layer(struct super_block *sb, struct ovl_fs *ofs,
-			   struct dentry *dentry, const char *name)
+			   struct dentry *dentry, const char *name,
+			   bool is_lower)
 {
 	struct dentry *next = dentry, *parent;
 	int err = 0;
@@ -1491,7 +1492,7 @@ static int ovl_check_layer(struct super_
 
 	/* Walk back ancestors to root (inclusive) looking for traps */
 	while (!err && parent != next) {
-		if (ovl_lookup_trap_inode(sb, parent)) {
+		if (is_lower && ovl_lookup_trap_inode(sb, parent)) {
 			err = -ELOOP;
 			pr_err("overlayfs: overlapping %s path\n", name);
 		} else if (ovl_is_inuse(parent)) {
@@ -1517,7 +1518,7 @@ static int ovl_check_overlapping_layers(
 
 	if (ofs->upper_mnt) {
 		err = ovl_check_layer(sb, ofs, ofs->upper_mnt->mnt_root,
-				      "upperdir");
+				      "upperdir", false);
 		if (err)
 			return err;
 
@@ -1528,7 +1529,8 @@ static int ovl_check_overlapping_layers(
 		 * workbasedir.  In that case, we already have their traps in
 		 * inode cache and we will catch that case on lookup.
 		 */
-		err = ovl_check_layer(sb, ofs, ofs->workbasedir, "workdir");
+		err = ovl_check_layer(sb, ofs, ofs->workbasedir, "workdir",
+				      false);
 		if (err)
 			return err;
 	}
@@ -1536,7 +1538,7 @@ static int ovl_check_overlapping_layers(
 	for (i = 0; i < ofs->numlower; i++) {
 		err = ovl_check_layer(sb, ofs,
 				      ofs->lower_layers[i].mnt->mnt_root,
-				      "lowerdir");
+				      "lowerdir", true);
 		if (err)
 			return err;
 	}

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Shuah Khan]

On 5/5/21 8:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Guenter Roeck]

On Wed, May 05, 2021 at 02:05:05PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 423 pass: 423 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Guenter Roeck]

On Wed, May 05, 2021 at 02:05:05PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 4.19.190-rc1
> 
> Miklos Szeredi <mszeredi@redhat.com>
>     ovl: allow upperdir inside lowerdir
> 
> Mark Pearson <markpearson@lenovo.com>
>     platform/x86: thinkpad_acpi: Correct thermal sensor allocation
> 
> Shengjiu Wang <shengjiu.wang@nxp.com>
>     ASoC: ak5558: Add MODULE_DEVICE_TABLE
> 
> Shengjiu Wang <shengjiu.wang@nxp.com>
>     ASoC: ak4458: Add MODULE_DEVICE_TABLE
> 
Wait, this also has the double commit. Can you please remove the bad one ?

Thanks,
Guenter

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Guenter Roeck]

On Wed, May 05, 2021 at 06:47:43PM -0700, Guenter Roeck wrote:
> On Wed, May 05, 2021 at 02:05:05PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.190 release.
> > There are 15 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> > Anything received after that time might be too late.
> > 
[ ... ]
> > 
> > Shengjiu Wang <shengjiu.wang@nxp.com>
> >     ASoC: ak5558: Add MODULE_DEVICE_TABLE
> > 
> > Shengjiu Wang <shengjiu.wang@nxp.com>
> >     ASoC: ak4458: Add MODULE_DEVICE_TABLE
> > 
> Wait, this also has the double commit. Can you please remove the bad one ?
> 
Actually, both need to be removed because they are already in the tree:

$ git describe
v4.19.189-16-g5a3ba2f90f87
$ git log --oneline v4.19.. sound/soc/codecs/ak4458.c sound/soc/codecs/ak5558.c
e32ee6f6fbcd ASoC: ak5558: Add MODULE_DEVICE_TABLE
5d0fe4839d63 ASoC: ak4458: Add MODULE_DEVICE_TABLE
04bb225a4824 ASoC: ak5558: Add MODULE_DEVICE_TABLE
25a09f4aad56 ASoC: ak4458: Add MODULE_DEVICE_TABLE
3f8d3c9506a5 ASoC: ak4458: rstn_control - return a non-zero on error only
4c31b4b4ba65 ASoC: ak4458: add return value for ak4458_probe

This applies to all branches.

Thanks,
Guenter

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Naresh Kamboju]

On Wed, 5 May 2021 at 17:35, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.190-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.190-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: 5a3ba2f90f8789162a03e07a37224bab4c643d1d
* git describe: v4.19.189-16-g5a3ba2f90f87
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.189-16-g5a3ba2f90f87

## No regressions (compared to v4.19.189-2-g1bd8f1c8ad2f)

## No fixes (compared to v4.19.189-2-g1bd8f1c8ad2f)

## Test result summary
 total: 68631, pass: 54812, fail: 2758, skip: 10808, xfail: 253,

## Build Summary
* arm: 96 total, 96 passed, 0 failed
* arm64: 24 total, 24 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 13 total, 13 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 14 total, 14 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Wed, May 05, 2021 at 02:05:05PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210430): 63 configs -> no failure
arm (gcc version 11.1.1 20210430): 116 configs -> no new failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.

CIP testing did not find any kernel problems here: (testing
infrastructure has some problems)

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/15] 4.19.190-rc1 review

[Samuel Zou]

On 2021/5/5 20:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.190 release.
> There are 15 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 07 May 2021 12:04:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.190-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.190-rc1
Commit: 5a3ba2f90f8789162a03e07a37224bab4c643d1d
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8435
passed: 8435
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8435
passed: 8435
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>