linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
	devicetree@vger.kernel.org, mka@chromium.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org,
	bgodavar@codeaurora.org, rjliao@codeaurora.org,
	hbandi@codeaurora.org, abhishekpandit@chromium.org
Subject: Re: [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema
Date: Thu, 6 May 2021 20:17:53 -0500	[thread overview]
Message-ID: <20210507011753.GB1126886@robh.at.kernel.org> (raw)
In-Reply-To: <1620322392-27148-5-git-send-email-gubbaven@codeaurora.org>

On Thu, May 06, 2021 at 11:03:11PM +0530, Venkata Lakshmi Narayana Gubba wrote:
> Converted Qualcomm Bluetooth binidings to DT schema.
> 
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
> ---
>  .../devicetree/bindings/net/qualcomm-bluetooth.txt |  69 -------------
>  .../bindings/net/qualcomm-bluetooth.yaml           | 111 +++++++++++++++++++++
>  2 files changed, 111 insertions(+), 69 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
>  create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml


> diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> new file mode 100644
> index 0000000..3f3ec4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Bluetooth Chips
> +
> +maintainers:
> +  - Marcel Holtmann <marcel@holtmann.org>

This should be someone who cares about Qcom BT.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +description:
> +  This binding describes Qualcomm UART-attached bluetooth chips.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,qca6174-bt
> +      - qcom,qca9377-bt
> +      - qcom,wcn3990-bt
> +      - qcom,wcn3991-bt
> +      - qcom,wcn3998-bt
> +      - qcom,qca6390-bt
> +
> +  enable-gpios:
> +    maxItems: 1
> +    description: gpio specifier used to enable chip
> +
> +  clocks:
> +    maxItems: 1
> +    description: clock provided to the controller (SUSCLK_32KHZ)
> +
> +  vddio-supply:
> +    description: VDD_IO supply regulator handle
> +
> +  vddxo-supply:
> +    description: VDD_XO supply regulator handle
> +
> +  vddrf-supply:
> +    description: VDD_RF supply regulator handle
> +
> +  vddch0-supply:
> +    description: VDD_CH0 supply regulator handle
> +
> +  max-speed:
> +    description: see Documentation/devicetree/bindings/serial/serial.yaml
> +
> +  firmware-name:
> +    description: specify the name of nvm firmware to load
> +
> +  local-bd-address:
> +    description: see Documentation/devicetree/bindings/net/bluetooth.txt
> +
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,qca6174-bt
> +    then:
> +      required:
> +        - enable-gpios
> +        - clocks
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,wcn3990-bt
> +              - qcom,wcn3991-bt
> +              - qcom,wcn3998-bt
> +    then:
> +      required:
> +        - vddio-supply
> +        - vddxo-supply
> +        - vddrf-supply
> +        - vddch0-supply
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    serial {
> +
> +        bluetooth {
> +            compatible = "qcom,qca6174-bt";
> +            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> +            clocks = <&divclk4>;
> +            firmware-name = "nvm_00440302.bin";
> +        };
> +    };
> +  - |
> +    serial {
> +
> +        bluetooth {
> +            compatible = "qcom,wcn3990-bt";
> +            vddio-supply = <&vreg_s4a_1p8>;
> +            vddxo-supply = <&vreg_l7a_1p8>;
> +            vddrf-supply = <&vreg_l17a_1p3>;
> +            vddch0-supply = <&vreg_l25a_3p3>;
> +            max-speed = <3200000>;
> +            firmware-name = "crnv21.bin";
> +        };
> +    };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 

  reply	other threads:[~2021-05-07  1:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 17:33 [PATCH v3 0/5] Enable Bluetooth functinality for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 1/5] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 2/5] Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-07  7:00   ` Marcel Holtmann
2021-05-10 17:16     ` gubbaven
2021-05-06 17:33 ` [PATCH v3 3/5] Bluetooth: btqca: Moved extracting rom version info to common place Venkata Lakshmi Narayana Gubba
2021-05-07  7:53   ` Marcel Holtmann
2021-05-10 17:09     ` gubbaven
2021-05-06 17:33 ` [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema Venkata Lakshmi Narayana Gubba
2021-05-07  1:17   ` Rob Herring [this message]
2021-05-07  6:55     ` Marcel Holtmann
2021-05-07 17:19       ` Rob Herring
2021-05-13 15:21         ` Marcel Holtmann
2021-05-18 16:30           ` gubbaven
2021-05-06 17:33 ` [PATCH v3 5/5] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-07  1:19   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210507011753.GB1126886@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=abhishekpandit@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gubbaven@codeaurora.org \
    --cc=hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    --cc=rjliao@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).