linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Pavel Skripkin <paskripkin@gmail.com>
Cc: mchehab@kernel.org, gregkh@linuxfoundation.org,
	linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: media: atomisp: remove useless breaks
Date: Fri, 7 May 2021 10:54:58 +0300	[thread overview]
Message-ID: <20210507075458.GB3@paasikivi.fi.intel.com> (raw)
In-Reply-To: <20210506200956.16593-1-paskripkin@gmail.com>

Hi Pavel,

On Thu, May 06, 2021 at 11:09:56PM +0300, Pavel Skripkin wrote:
> Breaks are not useful after a return, they can
> simply be removed.
> 
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
>  .../pci/hive_isp_css_common/host/input_system.c       | 11 -----------
>  1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c b/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c
> index 0f5a231672a8..fd82997b11cc 100644
> --- a/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c
> +++ b/drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c
> @@ -904,16 +904,12 @@ static input_system_err_t input_system_configure_channel(
>  			break;
>  		case INPUT_SYSTEM_SOURCE_TPG:
>  			return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -			break;
>  		case INPUT_SYSTEM_SOURCE_PRBS:
>  			return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -			break;
>  		case INPUT_SYSTEM_SOURCE_FIFO:
>  			return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;

While at it, you could drop the individual return statements, too. There
seems to be another such location at the end of the patch.

> -			break;
>  		default:
>  			return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -			break;
>  		}
>  
>  		if (error != INPUT_SYSTEM_ERR_NO_ERROR) return error;
> @@ -995,7 +991,6 @@ static input_system_err_t input_buffer_configuration(void)
>  			default:
>  				config.csi_buffer_flags[port] |= INPUT_SYSTEM_CFG_FLAG_CONFLICT;
>  				return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -				break;
>  			}
>  
>  			// Check acquisition buffer specified but set it later since it has to be unique.
> @@ -1032,7 +1027,6 @@ static input_system_err_t input_buffer_configuration(void)
>  
>  			default:
>  				return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -				break;
>  			}
>  		} else {
>  			config.csi_buffer_flags[port] = INPUT_SYSTEM_CFG_FLAG_BLOCKED;
> @@ -1319,7 +1313,6 @@ static input_system_err_t configuration_to_registers(void)
>  
>  	default:
>  		return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -		break;
>  
>  	} // end of switch (source_type)
>  
> @@ -1696,16 +1689,12 @@ static input_system_err_t input_system_configure_channel_sensor(
>  		break;
>  	case INPUT_SYSTEM_FIFO_CAPTURE_WITH_COUNTING:
>  		return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -		break;
>  	case INPUT_SYSTEM_XMEM_CAPTURE:
>  		return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -		break;
>  	case INPUT_SYSTEM_XMEM_ACQUIRE:
>  		return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -		break;
>  	default:
>  		return INPUT_SYSTEM_ERR_PARAMETER_NOT_SUPPORTED;
> -		break;
>  	}
>  	return INPUT_SYSTEM_ERR_NO_ERROR;
>  }

-- 
Regards,

Sakari Ailus

  reply	other threads:[~2021-05-07  7:55 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 20:09 [PATCH] staging: media: atomisp: remove useless breaks Pavel Skripkin
2021-05-07  7:54 ` Sakari Ailus [this message]
2021-05-07 13:25   ` Pavel Skripkin
2021-05-08 10:51   ` [PATCH v2] staging: media: atomisp: code cleanup Pavel Skripkin
2021-05-08 10:58     ` Greg KH
2021-05-08 11:32       ` Pavel Skripkin
2021-05-08 12:21       ` [PATCH v3 0/3] staging: media: atomisp: code clean up Pavel Skripkin
2021-05-08 12:21         ` [PATCH v3 1/3] staging: media: atomisp: remove useless breaks Pavel Skripkin
2021-05-08 12:21         ` [PATCH v3 2/3] staging: media: atomisp: remove dublicate code Pavel Skripkin
2021-05-08 12:21         ` [PATCH v3 3/3] staging: media: atomisp: remove useless returns Pavel Skripkin
2021-05-08 12:43           ` Fabio Aiuto
2021-05-08 12:48             ` Dan Carpenter
2021-05-08 12:59               ` Fabio Aiuto
2021-05-08 13:05             ` Pavel Skripkin
2021-05-08 13:16             ` [PATCH v4 0/3] staging: media: atomisp: code clean up Pavel Skripkin
2021-05-08 13:17               ` [PATCH v4 1/3] staging: media: atomisp: remove useless breaks Pavel Skripkin
2021-05-08 13:17               ` [PATCH v4 2/3] staging: media: atomisp: remove dublicate code Pavel Skripkin
2021-05-08 13:17               ` [PATCH v4 3/3] staging: media: atomisp: remove useless returns Pavel Skripkin
2021-05-25 16:18               ` [PATCH v4 0/3] staging: media: atomisp: code clean up Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210507075458.GB3@paasikivi.fi.intel.com \
    --to=sakari.ailus@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=paskripkin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).