linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>,
	dri-devel@lists.freedesktop.org,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <mripard@kernel.org>,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dom Cobley <dom@raspberrypi.com>, Daniel Vetter <daniel@ffwll.ch>,
	linux-rpi-kernel@lists.infradead.org,
	Eric Anholt <eric@anholt.net>
Subject: [PATCH 10/11] drm/vc4: hdmi: Remove redundant variables
Date: Fri,  7 May 2021 16:03:33 +0200	[thread overview]
Message-ID: <20210507140334.204865-11-maxime@cerno.tech> (raw)
In-Reply-To: <20210507140334.204865-1-maxime@cerno.tech>

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 26 ++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 --
 2 files changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 19739b57d067..a5780da70c1c 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1008,12 +1008,13 @@ static u32 vc5_hdmi_channel_map(struct vc4_hdmi *vc4_hdmi, u32 channel_mask)
 }
 
 /* HDMI audio codec callbacks */
-static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
+					 unsigned int samplerate)
 {
 	u32 hsm_clock = clk_get_rate(vc4_hdmi->audio_clock);
 	unsigned long n, m;
 
-	rational_best_approximation(hsm_clock, vc4_hdmi->audio.samplerate,
+	rational_best_approximation(hsm_clock, samplerate,
 				    VC4_HD_MAI_SMP_N_MASK >>
 				    VC4_HD_MAI_SMP_N_SHIFT,
 				    (VC4_HD_MAI_SMP_M_MASK >>
@@ -1025,12 +1026,11 @@ static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
 		   VC4_SET_FIELD(m - 1, VC4_HD_MAI_SMP_M));
 }
 
-static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
+static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned int samplerate)
 {
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
-	u32 samplerate = vc4_hdmi->audio.samplerate;
 	u32 n, cts;
 	u64 tmp;
 
@@ -1164,27 +1164,25 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 {
 	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
 	struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
+	unsigned int sample_rate = params->sample_rate;
+	unsigned int channels = params->channels;
 	u32 audio_packet_config, channel_mask;
 	u32 channel_map;
 	u32 mai_audio_format;
 	u32 mai_sample_rate;
 
 	dev_dbg(dev, "%s: %u Hz, %d bit, %d channels\n", __func__,
-		params->sample_rate, params->sample_width,
-		params->channels);
-
-	vc4_hdmi->audio.channels = params->channels;
-	vc4_hdmi->audio.samplerate = params->sample_rate;
+		sample_rate, params->sample_width, channels);
 
 	HDMI_WRITE(HDMI_MAI_CTL,
-		   VC4_SET_FIELD(params->channels, VC4_HD_MAI_CTL_CHNUM) |
+		   VC4_SET_FIELD(channels, VC4_HD_MAI_CTL_CHNUM) |
 		   VC4_HD_MAI_CTL_WHOLSMP |
 		   VC4_HD_MAI_CTL_CHALIGN |
 		   VC4_HD_MAI_CTL_ENABLE);
 
-	vc4_hdmi_audio_set_mai_clock(vc4_hdmi);
+	vc4_hdmi_audio_set_mai_clock(vc4_hdmi, sample_rate);
 
-	mai_sample_rate = sample_rate_to_mai_fmt(vc4_hdmi->audio.samplerate);
+	mai_sample_rate = sample_rate_to_mai_fmt(sample_rate);
 	if (params->iec.status[0] & IEC958_AES0_NONAUDIO &&
 	    params->channels == 8)
 		mai_audio_format = VC4_HDMI_MAI_FORMAT_HBR;
@@ -1202,7 +1200,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 		VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS |
 		VC4_SET_FIELD(0x8, VC4_HDMI_AUDIO_PACKET_B_FRAME_IDENTIFIER);
 
-	channel_mask = GENMASK(vc4_hdmi->audio.channels - 1, 0);
+	channel_mask = GENMASK(channels - 1, 0);
 	audio_packet_config |= VC4_SET_FIELD(channel_mask,
 					     VC4_HDMI_AUDIO_PACKET_CEA_MASK);
 
@@ -1221,7 +1219,7 @@ static int vc4_hdmi_audio_prepare(struct device *dev, void *data,
 	channel_map = vc4_hdmi->variant->channel_map(vc4_hdmi, channel_mask);
 	HDMI_WRITE(HDMI_MAI_CHANNEL_MAP, channel_map);
 	HDMI_WRITE(HDMI_AUDIO_PACKET_CONFIG, audio_packet_config);
-	vc4_hdmi_set_n_cts(vc4_hdmi);
+	vc4_hdmi_set_n_cts(vc4_hdmi, sample_rate);
 
 	memcpy(&vc4_hdmi->audio.infoframe, &params->cea, sizeof(params->cea));
 	vc4_hdmi_set_audio_infoframe(encoder);
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index fdee27faafa3..574f379faf93 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -108,8 +108,6 @@ struct vc4_hdmi_audio {
 	struct snd_soc_dai_link_component cpu;
 	struct snd_soc_dai_link_component codec;
 	struct snd_soc_dai_link_component platform;
-	int samplerate;
-	int channels;
 	struct snd_dmaengine_dai_dma_data dma_data;
 	struct hdmi_audio_infoframe infoframe;
 	bool streaming;
-- 
2.31.1


  parent reply	other threads:[~2021-05-07 14:05 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-07 14:03 [PATCH 00/11] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec Maxime Ripard
2021-05-07 14:03 ` [PATCH 01/11] snd: iec958: split status creation and fill Maxime Ripard
2021-05-25  7:33   ` Takashi Iwai
2021-05-25  9:33     ` Maxime Ripard
2021-05-07 14:03 ` [PATCH 02/11] ASoC: hdmi-codec: Rework to support more controls Maxime Ripard
2021-05-07 14:03 ` [PATCH 03/11] ASoC: hdmi-codec: Add iec958 controls Maxime Ripard
2021-05-07 14:03 ` [PATCH 04/11] ASoC: hdmi-codec: Add a prepare hook Maxime Ripard
2021-05-07 14:03 ` [PATCH 05/11] drm/vc4: hdmi: Set HD_CTL_WHOLSMP and HD_CTL_CHALIGN_SET Maxime Ripard
2021-05-07 14:03 ` [PATCH 06/11] drm/vc4: hdmi: Set HDMI_MAI_FMT Maxime Ripard
2021-05-07 14:03 ` [PATCH 07/11] drm/vc4: hdmi: Set VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE Maxime Ripard
2021-05-07 14:03 ` [PATCH 08/11] drm/vc4: hdmi: Remove firmware logic for MAI threshold setting Maxime Ripard
2021-05-07 14:03 ` [PATCH 09/11] drm/vc4: hdmi: Register HDMI codec Maxime Ripard
2021-05-07 14:03 ` Maxime Ripard [this message]
2021-05-07 14:03 ` [PATCH 11/11] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio Maxime Ripard
2021-05-24 13:39 ` [PATCH 00/11] drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec Maxime Ripard
2021-05-25  8:35   ` Takashi Iwai
2021-05-25  9:23     ` Maxime Ripard
2021-05-25  9:27       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210507140334.204865-11-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=broonie@kernel.org \
    --cc=daniel.vetter@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=perex@perex.cz \
    --cc=phil@raspberrypi.com \
    --cc=robh+dt@kernel.org \
    --cc=tim.gover@raspberrypi.com \
    --cc=tiwai@suse.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).