* [PATCH 5.12 000/677] 5.12.4-rc1 review
@ 2021-05-12 14:40 Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 001/677] Bluetooth: verify AMP hci_chan before amp_destroy Greg Kroah-Hartman
` (683 more replies)
0 siblings, 684 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable
This is the start of the stable review cycle for the 5.12.4 release.
There are 677 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.12.4-rc1
Xin Long <lucien.xin@gmail.com>
sctp: delay auto_asconf init until binding the first addr
Xin Long <lucien.xin@gmail.com>
Revert "net/sctp: fix race condition in sctp_destroy_sock"
Arnd Bergmann <arnd@arndb.de>
smp: Fix smp_call_function_single_async prototype
Jonathon Reinhart <jonathon.reinhart@gmail.com>
net: Only allow init netns to set default tcp cong to a restricted algo
Andrii Nakryiko <andrii@kernel.org>
bpf: Prevent writable memory-mapping of read-only ringbuf pages
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
bpf, ringbuf: Deny reserve of buffers larger than ringbuf
Daniel Borkmann <daniel@iogearbox.net>
bpf: Fix alu32 const subreg bound tracking on bitwise operations
David Howells <dhowells@redhat.com>
afs: Fix speculative status fetches
Jane Chu <jane.chu@oracle.com>
mm/memory-failure: unnecessary amount of unmapping
Wang Wensheng <wangwensheng4@huawei.com>
mm/sparse: add the missing sparse_buffer_fini() in error branch
Muchun Song <songmuchun@bytedance.com>
mm: memcontrol: slab: fix obtain a reference to a freeing memcg
Vlastimil Babka <vbabka@suse.cz>
mm, slub: enable slub_debug static key when creating cache with explicit debug flags
Dan Carpenter <dan.carpenter@oracle.com>
kfifo: fix ternary sign extension bugs
Sergei Trofimovich <slyfox@gentoo.org>
ia64: fix EFI_DEBUG build
Valentin Schneider <valentin.schneider@arm.com>
ia64: ensure proper NUMA distance and possible map initialization
Leo Yan <leo.yan@linaro.org>
perf session: Add swap operation for event TIME_CONV
Leo Yan <leo.yan@linaro.org>
perf jit: Let convert_timestamp() to be backwards-compatible
Leo Yan <leo.yan@linaro.org>
perf tools: Change fields type in perf_record_time_conv
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
Tobias Waldekranz <tobias@waldekranz.com>
net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE
Linus Lüssing <linus.luessing@c0d3.blue>
net: bridge: mcast: fix broken length + header check for MRDv6 Adv.
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
RDMA/siw: Fix a use after free in siw_alloc_mr
Daniel Borkmann <daniel@iogearbox.net>
bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds
Andrii Nakryiko <andrii@kernel.org>
selftests/bpf: Fix core_reloc test runner
Andrii Nakryiko <andrii@kernel.org>
selftests/bpf: Fix field existence CO-RE reloc tests
Andrii Nakryiko <andrii@kernel.org>
selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send
Davide Caratti <dcaratti@redhat.com>
net/sched: act_ct: fix wild memory access when clearing fragments
Sean Christopherson <seanjc@google.com>
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
Sean Christopherson <seanjc@google.com>
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
Sean Christopherson <seanjc@google.com>
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
Sean Christopherson <seanjc@google.com>
KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM
Michael Chan <michael.chan@broadcom.com>
bnxt_en: Fix RX consumer index logic in the error path.
Mat Martineau <mathew.j.martineau@linux.intel.com>
mptcp: Retransmit DATA_FIN
Danielle Ratson <danieller@nvidia.com>
selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test
Danielle Ratson <danieller@nvidia.com>
selftests: mlxsw: Remove a redundant if statement in port_scale test
Petr Machata <petrm@nvidia.com>
selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static
Phillip Potter <phil@philpotter.co.uk>
net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
Dan Carpenter <dan.carpenter@oracle.com>
bnxt_en: fix ternary sign extension bug in bnxt_show_temp()
Martin Willi <martin@strongswan.org>
net, xdp: Update pkt_type if generic XDP changes unicast MAC
Arnd Bergmann <arnd@arndb.de>
net: enetc: fix link error again
Maxim Kochetkov <fido_max@inbox.ru>
net: phy: marvell: fix m88e1111_set_downshift
Maxim Kochetkov <fido_max@inbox.ru>
net: phy: marvell: fix m88e1011_set_downshift
Christophe Leroy <christophe.leroy@csgroup.eu>
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
Athira Rajeev <atrajeev@linux.vnet.ibm.com>
powerpc/perf: Fix the threshold event selection for memory events in power10
Colin Ian King <colin.king@canonical.com>
wlcore: Fix buffer overrun by snprintf due to incorrect buffer size
Shuah Khan <skhan@linuxfoundation.org>
ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
ath10k: Fix a use after free in ath10k_htc_send_bundle
Toke Høiland-Jørgensen <toke@redhat.com>
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
Christophe Leroy <christophe.leroy@csgroup.eu>
powerpc/64: Fix the definition of the fixmap area
Shay Drory <shayd@nvidia.com>
RDMA/core: Add CM to restrack after successful attachment to a device
Bob Pearson <rpearsonhpe@gmail.com>
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix possible invalid register access
Colin Ian King <colin.king@canonical.com>
mt76: mt7615: Fix a dereference of pointer sta before it is null checked
Martin Schiller <ms@dev.tdt.de>
net: phy: intel-xway: enable integrated led functions
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
net: renesas: ravb: Fix a stuck issue when a lot of frames are received
Ong Boon Leong <boon.leong.ong@intel.com>
net: stmmac: fix TSO and TBS feature enabling during driver open
Yinjun Zhang <yinjun.zhang@corigine.com>
nfp: devlink: initialize the devlink port attribute "lanes"
Tobias Waldekranz <tobias@waldekranz.com>
net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region size
Sean Christopherson <seanjc@google.com>
crypto: ccp: Detect and reject "invalid" addresses destined for PSP
Leonardo Bras <leobras.c@gmail.com>
powerpc/pseries/iommu: Fix window size for direct mapping with pmem
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7915: fix memleak when mt7915_unregister_device()
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7615: fix memleak when mt7615_unregister_device()
Po-Hao Huang <phhuang@realtek.com>
rtw88: refine napi deinit flow
Colin Ian King <colin.king@canonical.com>
net: davinci_emac: Fix incorrect masking of tx and rx error channel
Vadym Kochan <vkochan@marvell.com>
net: marvell: prestera: fix port event handling on init
Stefano Garzarella <sgarzare@redhat.com>
vsock/virtio: free queued packets when closing socket
Edward Cree <ecree.xilinx@gmail.com>
sfc: ef10: fix TX queue lookup in TX event handling
Colin Ian King <colin.king@canonical.com>
ALSA: usb: midi: don't return -ENOMEM when usb_urb_ep_type_check fails
Sindhu Devale <sindhu.devale@intel.com>
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
Potnuri Bharat Teja <bharat@chelsio.com>
RDMA/cxgb4: add missing qpid increment
Alexander Lobakin <alobakin@pm.me>
gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check
Linus Walleij <linus.walleij@linaro.org>
net: ethernet: ixp4xx: Set the DMA masks explicitly
Florent Revest <revest@chromium.org>
libbpf: Initialize the bpf_seq_printf parameters array field by field
Stefano Garzarella <sgarzare@redhat.com>
vsock/vmci: log once the failed queue pair allocation
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nftables_offload: special ethertype handling for VLAN
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nft_payload: fix C-VLAN offload support
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
mwl8k: Fix a double Free in mwl8k_probe_hw
Qii Wang <qii.wang@mediatek.com>
i2c: mediatek: Fix wrong dma sync flag
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: sh7760: fix IRQ error path
Arnd Bergmann <arnd@arndb.de>
wlcore: fix overlapping snprintf arguments in debugfs
Ping-Ke Shih <pkshih@realtek.com>
rtlwifi: 8821ae: upgrade PHY and RF parameters
David Edmondson <david.edmondson@oracle.com>
KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
powerpc/smp: Reintroduce cpu_core_mask
Geliang Tang <geliangtang@gmail.com>
mptcp: fix format specifiers for unsigned int
Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
iommu/mediatek: Always enable the clk on resume
Tyrel Datwyler <tyreld@linux.ibm.com>
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
MIPS: pci-legacy: stop using of_pci_range_to_resource
Dan Carpenter <dan.carpenter@oracle.com>
drm/amd/pm: fix error code in smu_set_power_limit()
Dan Carpenter <dan.carpenter@oracle.com>
drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add()
Vitaly Chikunov <vt@altlinux.org>
perf beauty: Fix fsconfig generator
Paul Menzel <pmenzel@molgen.mpg.de>
iommu/amd: Put newline after closing bracket in warning
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
Dan Carpenter <dan.carpenter@oracle.com>
drm/i915/gvt: Fix error code in intel_gvt_init_device()
Eric Dumazet <edumazet@google.com>
net/packet: remove data races in fanout operations
Colin Ian King <colin.king@canonical.com>
net/mlx5: Fix bit-wise and with zero
Shengjiu Wang <shengjiu.wang@nxp.com>
ASoC: ak5558: correct reset polarity
Nicholas Piggin <npiggin@gmail.com>
powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order
Cédric Le Goater <clg@kaod.org>
powerpc/xive: Fix xmon command "dxi"
Cédric Le Goater <clg@kaod.org>
powerpc/xive: Drop check on irq_data in xive_core_debug_show()
Mukesh Sisodiya <mukesh.sisodiya@intel.com>
iwlwifi: dbg: disable ini debug in 9000 family and below
Mordechay Goodstein <mordechay.goodstein@intel.com>
iwlwifi: rs-fw: don't support stbc for HE 160
Alessio Balsini <balsini@android.com>
fuse: fix matching of FUSE_DEV_IOC_CLONE command
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: sh7760: add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: rcar: add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: mlxbf: add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: jz4780: add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: emev2: add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
i2c: cadence: add IRQ check
Qinglang Miao <miaoqinglang@huawei.com>
i2c: xiic: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: sprd: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: omap: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: imx: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: img-scb: fix reference leak when pm_runtime_get_sync fails
Qinglang Miao <miaoqinglang@huawei.com>
i2c: cadence: fix reference leak when pm_runtime_get_sync fails
Tudor Ambarus <tudor.ambarus@microchip.com>
pinctrl: at91-pio4: Fix slew rate disablement
Gioh Kim <gi-oh.kim@ionos.com>
RDMA/rtrs-clt: destroy sysfs after removing session from active list
Wang Wensheng <wangwensheng4@huawei.com>
RDMA/srpt: Fix error return code in srpt_cm_req_recv()
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix kernel crash when the firmware fails to download
Colin Ian King <colin.king@canonical.com>
net: thunderx: Fix unintentional sign extension issue
Colin Ian King <colin.king@canonical.com>
cxgb4: Fix unintentional sign extension issues
Wang Wensheng <wangwensheng4@huawei.com>
RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal()
Wang Wensheng <wangwensheng4@huawei.com>
IB/hfi1: Fix error return code in parse_platform_config()
Wang Wensheng <wangwensheng4@huawei.com>
RDMA/qedr: Fix error return code in qedr_iw_connect()
Amir Goldstein <amir73il@gmail.com>
ovl: invalidate readdir cache on changes to dir with origin
Giuseppe Scrivano <gscrivan@redhat.com>
ovl: show "userxattr" in the mount data
Nicholas Piggin <npiggin@gmail.com>
KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix the dwell time control
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7921: always wake the device in mt7921_remove_interface
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset()
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset()
Sean Wang <sean.wang@mediatek.com>
mt76: mt7663s: fix the possible device hang in high traffic
Sean Wang <sean.wang@mediatek.com>
mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
Sean Wang <sean.wang@mediatek.com>
mt76: mt7663: fix when beacon filter is being applied
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7915: fix txrate reporting
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7915: fix rxrate reporting
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix the base of the dynamic remap
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix the base of PCIe interrupt
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: connac: fix kernel warning adding monitor interface
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7915: fix mib stats counter reporting to mac80211
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7615: fix mib stats counter reporting to mac80211
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7615: fix TSF configuration
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7921: fix stats register definitions
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7915: fix aggr len debugfs node
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7921: fix aggr length histogram
Lorenzo Bianconi <lorenzo@kernel.org>
mt76: mt7615: fix memory leak in mt7615_coredump_work
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fixup rx bitrate statistics
Sean Wang <sean.wang@mediatek.com>
mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix memory leak in mt7921_coredump_work
Sean Wang <sean.wang@mediatek.com>
mt76: mt7921: fix suspend/resume sequence
Felix Fietkau <nbd@nbd.name>
mt76: mt7915: fix tx skb dma unmap
Felix Fietkau <nbd@nbd.name>
mt76: mt7615: fix tx skb dma unmap
Colin Ian King <colin.king@canonical.com>
mt7601u: fix always true expression
Dan Carpenter <dan.carpenter@oracle.com>
rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()
Colin Ian King <colin.king@canonical.com>
xfs: fix return of uninitialized value in variable error
Weihang Li <liweihang@huawei.com>
RDMA/hns: Fix missing assignment of max_inline_data
Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric
Johannes Berg <johannes.berg@intel.com>
mac80211: bail out if cipher schemes are invalid
Randy Dunlap <rdunlap@infradead.org>
powerpc: iommu: fix build when neither PCI or IBMVIO is set
Athira Rajeev <atrajeev@linux.vnet.ibm.com>
powerpc/perf: Fix PMU constraint check for EBB events
Michael Ellerman <mpe@ellerman.id.au>
powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro()
Michael Ellerman <mpe@ellerman.id.au>
powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp()
Jordan Niethe <jniethe5@gmail.com>
powerpc/64s: Fix pte update for kernel memory on radix
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
IB/hfi1: Use kzalloc() for mmu_rb_handler allocation
Colin Ian King <colin.king@canonical.com>
liquidio: Fix unintented sign extension of a left shift of a u16
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
ASoC: simple-card: fix possible uninitialized single_cpu local variable
Alexandru Elisei <alexandru.elisei@arm.com>
KVM: arm64: Initialize VCPU mdcr_el2 before loading it
Hans de Goede <hdegoede@redhat.com>
HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE
Hans de Goede <hdegoede@redhat.com>
HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event()
Hans de Goede <hdegoede@redhat.com>
HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling
Hans de Goede <hdegoede@redhat.com>
HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness
Takashi Iwai <tiwai@suse.de>
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Invalidate PASID cache when root/context entry changed
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Remove WO permissions on second-level paging entries
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Report the right page fault address
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Report right snoop capability when using FL for IOVA
Xiang Chen <chenxiang66@hisilicon.com>
iommu: Fix a boundary issue to avoid performance drop
Lu Baolu <baolu.lu@linux.intel.com>
iommu/vt-d: Don't set then clear private data in prq_event_thread()
Wang Wensheng <wangwensheng4@huawei.com>
KVM: arm64: Fix error return code in init_hyp_mode()
Álvaro Fernández Rojas <noltari@gmail.com>
mips: bmips: fix syscon-reboot nodes
Salil Mehta <salil.mehta@huawei.com>
net: hns3: Limiting the scope of vector_ring_chain variable
Dan Carpenter <dan.carpenter@oracle.com>
nfc: pn533: prevent potential memory corruption
Håkon Bugge <haakon.bugge@oracle.com>
RDMA/core: Fix corrupted SL on passive side
Andrew Scull <ascull@google.com>
bug: Remove redundant condition check in report_bug
Yang Yingliang <yangyingliang@huawei.com>
net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start()
Michael Ellerman <mpe@ellerman.id.au>
powerpc/pseries: Only register vio drivers if vio bus exists
Paolo Abeni <pabeni@redhat.com>
udp: never accept GSO_FRAGLIST packets
Paolo Abeni <pabeni@redhat.com>
udp: skip L4 aggregation for UDP tunnel packets
Andre Edich <andre.edich@microchip.com>
net: phy: lan87xx: fix access to wrong register of LAN87xx
Jia Zhou <zhou.jia2@zte.com.cn>
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
ASoC: q6afe-clocks: fix reprobing of the driver
Yang Yingliang <yangyingliang@huawei.com>
fs: dlm: fix missing unlock on error in accept_from_sock()
Álvaro Fernández Rojas <noltari@gmail.com>
gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
Tiezhu Yang <yangtiezhu@loongson.cn>
MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again
Chen Huang <chenhuang5@huawei.com>
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
Nicholas Piggin <npiggin@gmail.com>
powerpc/64s: Fix hash fault to use TRAP accessor
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
IB/isert: Fix a use after free in isert_connect_request
Maor Gottlieb <maorg@nvidia.com>
RDMA/mlx5: Fix drop packet rule in egress table
Zhen Lei <thunder.leizhen@huawei.com>
iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK
Shengjiu Wang <shengjiu.wang@nxp.com>
ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk
Huang Pei <huangpei@loongson.cn>
MIPS: loongson64: fix bug when PAGE_SIZE > 16KB
Hanna Hawa <hhhawa@amazon.com>
pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero
Hanna Hawa <hhhawa@amazon.com>
pinctrl: pinctrl-single: remove unused parameter
Eric Dumazet <edumazet@google.com>
inet: use bigger hash table for IP ID generation
Li Huafei <lihuafei1@huawei.com>
ima: Fix the error code for restoring the PCR value
Huang Pei <huangpei@loongson.cn>
MIPS: fix local_irq_{disable,enable} in asmmacro.h
Nathan Chancellor <nathan@kernel.org>
powerpc/prom: Mark identical_pvr_fixup as __init
Nathan Chancellor <nathan@kernel.org>
powerpc/fadump: Mark fadump_calculate_reserve_size as __init
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used
KP Singh <kpsingh@kernel.org>
libbpf: Add explicit padding to btf_dump_emit_type_decl_opts
Andrii Nakryiko <andrii@kernel.org>
selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed
Rafał Miłecki <rafal@milecki.pl>
net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s)
Rafał Miłecki <rafal@milecki.pl>
net: dsa: bcm_sf2: add function finding RGMII register
Dmitry Osipenko <digetx@gmail.com>
ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
Jacob Pan <jacob.jun.pan@linux.intel.com>
iommu/vt-d: Reject unsupported page request modes
Robin Murphy <robin.murphy@arm.com>
iommu/dma: Resurrect the "forcedac" option
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
iommu: Check dev->iommu in iommu_dev_xxx functions
Andrii Nakryiko <andrii@kernel.org>
bpftool: Fix maybe-uninitialized warnings
Andrii Nakryiko <andrii@kernel.org>
libbpf: Add explicit padding to bpf_xdp_set_link_opts
Xie He <xie.he.0141@gmail.com>
net: lapbether: Prevent racing when checking whether the netif is running
Jiri Kosina <jkosina@suse.cz>
Bluetooth: avoid deadlock between hci_dev->lock and socket lock
Sean Christopherson <seanjc@google.com>
KVM: x86/mmu: Retry page faults that hit an invalid memslot
Marcus Folkesson <marcus.folkesson@gmail.com>
wilc1000: write value to WILC_INTR2_ENABLE register
Yevgeny Kliteynik <kliteyn@nvidia.com>
net/mlx5: DR, Add missing vhca_id consume from STEv1
Mark Zhang <markzhang@nvidia.com>
RDMA/mlx5: Fix mlx5 rates to IB rates map
Maor Gottlieb <maorg@nvidia.com>
RDMA/mlx5: Fix query RoCE port
Jason Gunthorpe <jgg@ziepe.ca>
RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr
Cezary Rojewski <cezary.rojewski@intel.com>
ASoC: Intel: Skylake: Compile when any configuration is selected
Colin Ian King <colin.king@canonical.com>
ASoC: Intel: boards: sof-wm8804: add check for PLL setting
Arnaldo Carvalho de Melo <acme@redhat.com>
perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
Maxim Mikityanskiy <maxtram95@gmail.com>
HID: plantronics: Workaround for double volume key presses
Alexander Lobakin <alobakin@pm.me>
xsk: Respect device's headroom and tailroom on generic xmit path
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
drivers/block/null_blk/main: Fix a double free in null_init.
Dan Carpenter <dan.carpenter@oracle.com>
ataflop: fix off by one in ataflop_probe()
Dan Carpenter <dan.carpenter@oracle.com>
ataflop: potential out of bounds in do_format()
Peter Zijlstra <peterz@infradead.org>
kthread: Fix PF_KTHREAD vs to_kthread() race
Waiman Long <longman@redhat.com>
sched/debug: Fix cgroup_path[] serialization
Dima Stepanov <dmitrii.stepanov@cloud.ionos.com>
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
Pavel Begunkov <asml.silence@gmail.com>
io_uring: fix overflows checks in provide buffers
Nathan Chancellor <nathan@kernel.org>
perf/amd/uncore: Fix sysfs type mismatch
Nathan Chancellor <nathan@kernel.org>
x86/events/amd/iommu: Fix sysfs type mismatch
Dan Carpenter <dan.carpenter@oracle.com>
HSI: core: fix resource leaks in hsi_add_client_from_dt()
Jernej Skrabec <jernej.skrabec@siol.net>
media: cedrus: Fix H265 status definitions
Neil Armstrong <narmstrong@baylibre.com>
media: meson-ge2d: fix rotation parameters
Niklas Cassel <niklas.cassel@wdc.com>
nvme-pci: don't simple map sgl when sgls are disabled
Elad Grupi <elad.grupi@dell.com>
nvmet-tcp: fix a segmentation fault during io parsing error
Fabrice Gasnier <fabrice.gasnier@foss.st.com>
mfd: stm32-timers: Avoid clearing auto reload register
Orson Zhai <orson.zhai@unisoc.com>
mailbox: sprd: Introduce refcnt when clients requests/free channels
Brian King <brking@linux.vnet.ibm.com>
scsi: ibmvfc: Fix invalid state machine BUG_ON()
Sergey Shtylyov <s.shtylyov@omprussia.ru>
scsi: sni_53c710: Add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
scsi: sun3x_esp: Add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
scsi: jazz_esp: Add IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
scsi: hisi_sas: Fix IRQ checks
Sergey Shtylyov <s.shtylyov@omprussia.ru>
scsi: ufs: ufshcd-pltfrm: Fix deferred probing
Colin Ian King <colin.king@canonical.com>
scsi: pm80xx: Fix potential infinite loop
Igor Pylypiv <ipylypiv@google.com>
scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()
Colin Ian King <colin.king@canonical.com>
clk: uniphier: Fix potential infinite loop
Gustavo A. R. Silva <gustavoars@kernel.org>
bcache: Use 64-bit arithmetic instead of 32-bit
Yingjie Wang <wangyingjie55@126.com>
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
Sefa Eyeoglu <contact@scrumplex.net>
drm/amd/display: check fb of primary plane
Nirmoy Das <nirmoy.das@amd.com>
drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct
Chen Hui <clare.chenhui@huawei.com>
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
Chen Hui <clare.chenhui@huawei.com>
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
Chen Hui <clare.chenhui@huawei.com>
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
Jacopo Mondi <jacopo+renesas@jmondi.org>
media: i2c: rdamc21: Fix warning on u8 cast
Dan Carpenter <dan.carpenter@oracle.com>
drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()
Quanyang Wang <quanyang.wang@windriver.com>
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
Quanyang Wang <quanyang.wang@windriver.com>
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
Jason Gunthorpe <jgg@ziepe.ca>
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dpu: enable DPU_SSPP_QOS_8LVL for SM8250
Rob Clark <robdclark@chromium.org>
drm/msm: Fix debugfs deadlock
Jason Gunthorpe <jgg@ziepe.ca>
vfio/pci: Re-order vfio_pci_probe()
Jason Gunthorpe <jgg@ziepe.ca>
vfio/pci: Move VGA and VF initialization to functions
Jason Gunthorpe <jgg@ziepe.ca>
vfio/fsl-mc: Re-order vfio_fsl_mc_probe()
Daniel Almeida <daniel.almeida@collabora.com>
media: rkvdec: Do not require all controls to be present in every request
Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: v4l2-ctrls.c: fix race condition in hdl->requests list
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
media: i2c: imx219: Balance runtime PM use-count
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
Sakari Ailus <sakari.ailus@linux.intel.com>
media: ipu3-cio2: Fix pixel-rate derived link frequency
Sakari Ailus <sakari.ailus@linux.intel.com>
media: ccs: Fix sub-device function
Hannes Reinecke <hare@suse.de>
nvme: retrigger ANA log update if group descriptor isn't found
Ricardo Rivera-Matos <r-rivera-matos@ti.com>
power: supply: bq25980: Move props from battery node
Adam Ford <aford173@gmail.com>
clk: imx: Fix reparenting of UARTs not associated with stdout
Sagi Grimberg <sagi@grimberg.me>
nvmet-tcp: fix incorrect locking in state_change sk callback
Sagi Grimberg <sagi@grimberg.me>
nvme-tcp: block BH in sk state_change sk callback
Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
drm/mediatek: Don't support hdmi connector creation
Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
drm/mediatek: Switch the hdmi bridge ops to the atomic versions
Kenta.Tada@sony.com <Kenta.Tada@sony.com>
seccomp: Fix CONFIG tests for Seccomp_filters
Sergey Shtylyov <s.shtylyov@omprussia.ru>
ata: libahci_platform: fix IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
sata_mv: add IRQ checks
Sergey Shtylyov <s.shtylyov@omprussia.ru>
pata_ipx4xx_cf: fix IRQ check
Sergey Shtylyov <s.shtylyov@omprussia.ru>
pata_arasan_cf: fix IRQ check
Ilya Leoshkevich <iii@linux.ibm.com>
selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
Yang Li <yang.lee@linux.alibaba.com>
drm/omap: dsi: Add missing IRQF_ONESHOT
Masami Hiramatsu <mhiramat@kernel.org>
x86/kprobes: Fix to check non boostable prefixes correctly
Bart Van Assche <bvanassche@acm.org>
scsi: qla2xxx: Check kzalloc() return value
kernel test robot <lkp@intel.com>
of: overlay: fix for_each_child.cocci warnings
Victor Lu <victorchengchi.lu@amd.com>
drm/amd/display: Free local data after use
Felix Kuehling <Felix.Kuehling@amd.com>
drm/amdkfd: Fix recursive lock warnings
Felix Kuehling <Felix.Kuehling@amd.com>
drm/amdkfd: fix build error with AMD_IOMMU_V2=m
Masami Hiramatsu <mhiramat@kernel.org>
x86/kprobes: Retrieve correct opcode for group instruction
Dan Carpenter <dan.carpenter@oracle.com>
media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs()
Colin Ian King <colin.king@canonical.com>
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
Souptick Joarder <jrdr.linux@gmail.com>
media: atomisp: Fixed error handling path
Colin Ian King <colin.king@canonical.com>
media: [next] staging: media: atomisp: fix memory leak of object flash
Liu Ying <victor.liu@nxp.com>
media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30
Wei Yongjun <weiyongjun1@huawei.com>
media: m88ds3103: fix return value check in m88ds3103_probe()
Jia-Ju Bai <baijiaju1990@gmail.com>
media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming()
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
media: venus: core: Fix some resource leaks in the error path of 'venus_probe()'
Noralf Trønnes <noralf@tronnes.org>
drm/probe-helper: Check epoch counter in output_poll_execute()
Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
power: supply: bq27xxx: fix sign of current_now for newer ICs
Douglas Anderson <dianders@chromium.org>
drm/panel-simple: Undo enable if HPD never asserts
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
media: aspeed: fix clock handling logic
Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
media: rkisp1: rsz: crash fix when setting src format
Yang Yingliang <yangyingliang@huawei.com>
media: omap4iss: return error code when omap4iss_get() failed
Tasos Sahanidis <tasos@tasossah.com>
media: saa7146: use sg_dma_len when building pgtable
Tasos Sahanidis <tasos@tasossah.com>
media: saa7134: use sg_dma_len when building pgtable
Colin Ian King <colin.king@canonical.com>
media: vivid: fix assignment of dev->fbuf_out_flags
Arnd Bergmann <arnd@arndb.de>
media: mtk: fix mtk-smi dependency
Zhouyi Zhou <zhouzhouyi@gmail.com>
rcu: Remove spurious instrumentation_end() in rcu_nmi_enter()
David Howells <dhowells@redhat.com>
afs: Fix updating of i_mode due to 3rd party change
John Ogness <john.ogness@linutronix.de>
printk: limit second loop of syslog_print_all
Valentin Schneider <valentin.schneider@arm.com>
sched/fair: Fix shift-out-of-bounds in load_balance()
James Smart <jsmart2021@gmail.com>
scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb()
Linus Walleij <linus.walleij@linaro.org>
drm/mcde/panel: Inverse misunderstood flag
Dan Carpenter <dan.carpenter@oracle.com>
drm/amd/display: Fix off by one in hdmi_14_process_transaction()
Marek Vasut <marex@denx.de>
drm/stm: Fix bus_flags handling
Quanyang Wang <quanyang.wang@windriver.com>
drm/tilcdc: send vblank event when disabling crtc
Dan Carpenter <dan.carpenter@oracle.com>
soc: aspeed: fix a ternary sign expansion bug
Paul Durrant <pdurrant@amazon.com>
xen-blkback: fix compatibility bug with single page rings
Quanyang Wang <quanyang.wang@windriver.com>
spi: tools: make a symbolic link to the header file spi.h
Dario Binacchi <dariobin@libero.it>
serial: omap: fix rs485 half-duplex filtering
Dario Binacchi <dariobin@libero.it>
serial: omap: don't disable rs485 if rts gpio is missing
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
ttyprintk: Add TTY hangup callback.
Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
usb: dwc2: Fix hibernation between host and device modes.
Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
Chris von Recklinghausen <crecklin@redhat.com>
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
Michael Kelley <mikelley@microsoft.com>
Drivers: hv: vmbus: Increase wait time for VMbus unload
Dan Carpenter <dan.carpenter@oracle.com>
platform/surface: aggregator: fix a bit test
Paul Fertser <fercerpav@gmail.com>
hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
Ingo Molnar <mingo@kernel.org>
x86/platform/uv: Fix !KEXEC build failure
Arnd Bergmann <arnd@arndb.de>
btrfs: zoned: bail out in btrfs_alloc_chunk for bad input
Naohiro Aota <naohiro.aota@wdc.com>
btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
Ard Biesheuvel <ardb@kernel.org>
crypto: arm64/aes-ce - deal with oversight in new CTR carry code
Dan Carpenter <dan.carpenter@oracle.com>
Drivers: hv: vmbus: Use after free in __vmbus_open()
Eddie James <eajames@linux.ibm.com>
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
Dinghao Liu <dinghao.liu@zju.edu.cn>
spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpm: Honour pSnkStdby requirement during negotiation
Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
Zhihao Cheng <chengzhihao1@huawei.com>
char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()
James Bottomley <James.Bottomley@HansenPartnership.com>
security: keys: trusted: fix TPM2 authorizations
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
Wei Yongjun <weiyongjun1@huawei.com>
spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op()
Pawel Laszczak <pawell@cadence.com>
usb: cdnsp: Fixes issue with Configure Endpoint command
Liam Howlett <liam.howlett@oracle.com>
m68k: Add missing mmap_read_lock() to sys_cacheflush()
Ye Bin <yebin10@huawei.com>
usbip: vudc: fix missing unlock on error in usbip_sockfd_store()
Ayush Sawal <ayush.sawal@chelsio.com>
crypto: chelsio - Read rxchannel-id from firmware
Dan Carpenter <dan.carpenter@oracle.com>
node: fix device cleanups in error handling code
He Ying <heying24@huawei.com>
firmware: qcom-scm: Fix QCOM_SCM configuration
Johan Hovold <johan@kernel.org>
serial: core: return early on unsupported ioctls
Johan Hovold <johan@kernel.org>
tty: fix return value for unsupported termiox ioctls
Johan Hovold <johan@kernel.org>
tty: fix return value for unsupported ioctls
Johan Hovold <johan@kernel.org>
tty: actually undefine superseded ASYNC flags
Johan Hovold <johan@kernel.org>
USB: cdc-acm: fix TIOCGSERIAL implementation
Johan Hovold <johan@kernel.org>
USB: cdc-acm: fix unprivileged TIOCCSERIAL
Colin Ian King <colin.king@canonical.com>
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
Wang Li <wangli74@huawei.com>
spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware()
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: transmit dummy circles by using the controller's internal functionality
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: add mutex locking for exec_op
Quanyang Wang <quanyang.wang@windriver.com>
spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible
Pali Rohár <pali@kernel.org>
cpufreq: armada-37xx: Fix determining base CPU frequency
Pali Rohár <pali@kernel.org>
cpufreq: armada-37xx: Fix driver cleanup when registration failed
Pali Rohár <pali@kernel.org>
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
Pali Rohár <pali@kernel.org>
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
Pali Rohár <pali@kernel.org>
cpufreq: armada-37xx: Fix the AVS value for load L1
Marek Behún <kabel@kernel.org>
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
Marek Behún <kabel@kernel.org>
cpufreq: armada-37xx: Fix setting TBG parent for load levels
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
crypto: qat - Fix a double free in adf_create_ring
Colin Ian King <colin.king@canonical.com>
crypto: sa2ul - Fix memory leak of rxd
Colin Ian King <colin.king@canonical.com>
crypto: sun8i-ss - Fix memory leak of pad
Corentin Labbe <clabbe.montjoie@gmail.com>
crypto: allwinner - add missing CRYPTO_ prefix
Nathan Chancellor <nathan@kernel.org>
ACPI: CPPC: Replace cppc_attr with kobj_attribute
He Ying <heying24@huawei.com>
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
YueHaibing <yuehaibing@huawei.com>
PM: runtime: Replace inline function pm_runtime_callbacks_present()
Bjorn Andersson <bjorn.andersson@linaro.org>
soc: qcom: mdt_loader: Detect truncated read of segments
Bjorn Andersson <bjorn.andersson@linaro.org>
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
Yang Yingliang <yangyingliang@huawei.com>
spi: fsl: add missing iounmap() on error in of_fsl_spi_probe()
William A. Kennington III <wak@google.com>
spi: Fix use-after-free with devm_spi_alloc_*
Wei Yongjun <weiyongjun1@huawei.com>
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
Tony Lindgren <tony@atomide.com>
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
Tony Lindgren <tony@atomide.com>
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
Dong Aisheng <aisheng.dong@nxp.com>
PM / devfreq: Use more accurate returned new_freq as resume_freq
Qinglang Miao <miaoqinglang@huawei.com>
soc: qcom: pdr: Fix error return code in pdr_register_listener
Hans de Goede <hdegoede@redhat.com>
platform/x86: dell-wmi-sysman: Make init_bios_attributes() ACPI object parsing more robust
Johan Hovold <johan@kernel.org>
staging: greybus: uart: fix unprivileged TIOCCSERIAL
Johan Hovold <johan@kernel.org>
staging: fwserial: fix TIOCGSERIAL implementation
Johan Hovold <johan@kernel.org>
staging: fwserial: fix TIOCSSERIAL implementation
Colin Ian King <colin.king@canonical.com>
staging: rtl8192u: Fix potential infinite loop
Ian Abbott <abbotti@mev.co.uk>
staging: comedi: tests: ni_routes_test: Fix compilation error
Arnd Bergmann <arnd@arndb.de>
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
Lv Yunlong <lyl2019@mail.ustc.edu.cn>
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
Alexandru Ardelean <aardelean@deviqon.com>
iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol
Stephen Boyd <swboyd@chromium.org>
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
Stephen Boyd <swboyd@chromium.org>
firmware: qcom_scm: Reduce locking section for __get_convention()
Stephen Boyd <swboyd@chromium.org>
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Finn Thain <fthain@telegraphics.com.au>
m68k: mvme147,mvme16x: Don't wipe PCC timer config bits
Rander Wang <rander.wang@intel.com>
soundwire: stream: fix memory leak in stream config error path
gexueyuan <gexueyuan@gmail.com>
memory: pl353: fix mask of ECC page_size config register
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
driver core: platform: Declare early_platform_cleanup() prototype
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
nvmem: rmem: fix undefined reference to memremap
Ravi Kumar Bokka <rbokka@codeaurora.org>
drivers: nvmem: Fix voltage settings for QTI qfprom-efuse
Yang Yingliang <yangyingliang@huawei.com>
USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()
Tao Ren <rentao.bupt@gmail.com>
usb: gadget: aspeed: fix dma map failure
Giovanni Cabiddu <giovanni.cabiddu@intel.com>
crypto: qat - fix error path in adf_isr_resource_alloc()
Arnd Bergmann <arnd@arndb.de>
crypto: poly1305 - fix poly1305_core_setkey() declaration
Olga Kornievskaia <kolga@netapp.com>
NFSv4.2: fix copy stateid copying for the async copy
Fabien Parent <fparent@baylibre.com>
arm64: dts: mediatek: fix reset GPIO level on pumpkin
Wei Yongjun <weiyongjun1@huawei.com>
phy: ingenic: Fix a typo in ingenic_usb_phy_probe()
Wei Yongjun <weiyongjun1@huawei.com>
phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe()
Geert Uytterhoeven <geert+renesas@glider.be>
phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally
Sergio Paracuellos <sergio.paracuellos@gmail.com>
phy: ralink: phy-mt7621-pci: fix XTAL bitmask
Kishon Vijay Abraham I <kishon@ti.com>
phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
Enric Balletbo i Serra <enric.balletbo@collabora.com>
soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain()
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
soundwire: bus: Fix device found flag correctly
Jonathan Marek <jonathan@marek.ca>
arm64: dts: qcom: sm8250: fix display nodes
Pan Bian <bianpan2016@163.com>
bus: qcom: Put child node before return
Chunfeng Yun <chunfeng.yun@mediatek.com>
arm64: dts: mt8173: fix wrong power-domain phandle of pmic
Hsin-Yi Wang <hsinyi@chromium.org>
arm64: dts: mt8183: Add gce client reg for display subcomponents
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
arm64: dts: renesas: r8a779a0: Fix PMU interrupt
Michael Walle <michael@walle.cc>
mtd: require write permissions for locking and badblock ioctls
dillon min <dillon.minfei@gmail.com>
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
usb: gadget: s3c: Fix incorrect resources releasing
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Complete OUT requests on short packets
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Don't DMA more than the buffer can take
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Mask GRP2 interrupts we don't handle
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Remove a dubious condition leading to fotg210_done
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Fix EP0 IN requests bigger than two packets
Fabian Vogt <fabian@ritter-vogt.de>
fotg210-udc: Fix DMA on EP0 for length > max packet size
Tong Zhang <ztong0001@gmail.com>
crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
Tong Zhang <ztong0001@gmail.com>
crypto: qat - don't release uninitialized resources
Rijo Thomas <Rijo-john.Thomas@amd.com>
crypto: ccp - fix command queuing to TEE ring buffer
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Initialize device pointer before use
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Check for DMA mapping error
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
Rasmus Villemoes <linux@rasmusvillemoes.dk>
devtmpfs: fix placement of complete() call
Dmitry Osipenko <digetx@gmail.com>
usb: host: ehci-tegra: Select USB_GADGET Kconfig option
Otavio Pontes <otavio.pontes@intel.com>
x86/microcode: Check for offline CPUs before requesting new microcode
Dan Carpenter <dan.carpenter@oracle.com>
staging: qlge: fix an error code in probe()
Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Drivers: hv: vmbus: Drop error message when 'No request id available'
Alain Volmat <alain.volmat@foss.st.com>
spi: stm32: Fix use-after-free on unbind
Eric Biggers <ebiggers@google.com>
crypto: arm/blake2s - fix for big endian
Andy Lutomirski <luto@kernel.org>
selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S
Vladimir Barinov <vladimir.barinov@cogentembedded.com>
arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding
Dan Carpenter <dan.carpenter@oracle.com>
regulator: bd9576: Fix return from bd957x_probe()
Rafał Miłecki <rafal@milecki.pl>
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
Antonio Borneo <antonio.borneo@foss.st.com>
spi: stm32: drop devres version of spi_register_master
Colin Ian King <colin.king@canonical.com>
crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
Shawn Guo <shawn.guo@linaro.org>
arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'
Shawn Guo <shawn.guo@linaro.org>
arm64: dts: qcom: sm8250: fix number of pins in 'gpio-ranges'
Shawn Guo <shawn.guo@linaro.org>
arm64: dts: qcom: sm8150: fix number of pins in 'gpio-ranges'
Shawn Guo <shawn.guo@linaro.org>
arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'
Douglas Anderson <dianders@chromium.org>
arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
arm64: dts: qcom: sm8350: Fix level triggered PMU interrupt polarity
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity
Matthias Kaehlcke <mka@chromium.org>
arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone
Nuno Sa <nuno.sa@analog.com>
iio: adis16480: fix pps mode sampling frequency math
Aswath Govindraju <a-govindraju@ti.com>
arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
Valentin CARON - foss <valentin.caron@foss.st.com>
ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control
Jia-Ju Bai <baijiaju1990@gmail.com>
mtd: maps: fix error return code of physmap_flash_remove()
Baruch Siach <baruch@tkos.co.il>
mtd: parsers: qcom: incompatible with spi-nor 4k sectors
Miquel Raynal <miquel.raynal@bootlin.com>
mtd: parsers: qcom: Fix error condition
David Bauer <mail@david-bauer.net>
mtd: don't lock when recursively deleting partitions
Manivannan Sadhasivam <mani@kernel.org>
mtd: rawnand: qcom: Return actual error code instead of -ENODEV
Manivannan Sadhasivam <mani@kernel.org>
mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()
Álvaro Fernández Rojas <noltari@gmail.com>
mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
Dan Carpenter <dan.carpenter@oracle.com>
mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
Rafał Miłecki <rafal@milecki.pl>
arm64: dts: broadcom: bcm4908: fix switch parent node name
Arnd Bergmann <arnd@arndb.de>
spi: rockchip: avoid objtool warning
Meng Li <Meng.Li@windriver.com>
regmap: set debugfs_name to NULL after it is freed
David E. Box <david.e.box@linux.intel.com>
mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities
Wei Yongjun <weiyongjun1@huawei.com>
usb: typec: stusb160x: fix return value check in stusb160x_probe()
Wei Yongjun <weiyongjun1@huawei.com>
usb: typec: tps6598x: Fix return value check in tps6598x_probe()
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix tx_empty condition
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: add FIFO flush when port is closed
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix FIFO flush in startup and set_termios
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: call stm32_transmit_chars locked
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix tx dma completion, release channel
Wei Yongjun <weiyongjun1@huawei.com>
serial: liteuart: fix return value check in liteuart_probe()
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix a deadlock in set_termios
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix wake-up flag handling
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix a deadlock condition with wakeup event
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix TX and RX FIFO thresholds
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix incorrect characters on console
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix startup by enabling usart for reception
Erwan Le Ray <erwan.leray@foss.st.com>
serial: stm32: fix probe and remove order for dma
Mike Travis <mike.travis@hpe.com>
x86/platform/uv: Set section block size for hubless architectures
Tony Lindgren <tony@atomide.com>
bus: ti-sysc: Fix initializing module_pa for modules without sysc register
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
arm64: dts: renesas: Add mmc aliases into board dts files
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
Krzysztof Kozlowski <krzk@kernel.org>
ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
Colin Ian King <colin.king@canonical.com>
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
Corentin Labbe <clabbe.montjoie@gmail.com>
crypto: sun8i-ss - fix result memory leak on error path
Wei Yongjun <weiyongjun1@huawei.com>
crypto: keembay-ocs-aes - Fix error return code in kmb_ocs_aes_probe()
Wei Yongjun <weiyongjun1@huawei.com>
crypto: keembay-ocs-hcu - Fix error return code in kmb_ocs_hcu_probe()
Luca Ceresoli <luca@lucaceresoli.net>
fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
Jiri Slaby <jirislaby@kernel.org>
x86/vdso: Use proper modifier for len's format specifier in extract()
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
Tejas Patel <tejas.patel@xilinx.com>
firmware: xilinx: Fix dereferencing freed memory
Len Brown <len.brown@intel.com>
Revert "tools/power turbostat: adjust for temperature offset"
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
usb: gadget: pch_udc: Revert d3cb25a12138 completely
Gerd Hoffmann <kraxel@redhat.com>
Revert "drm/qxl: do not run release if qxl failed to init"
Dan Carpenter <dan.carpenter@oracle.com>
ovl: fix missing revert_creds() on error path
Rikard Falkeborn <rikard.falkeborn@gmail.com>
mfd: stmpe: Revert "Constify static struct resource"
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
Xie He <xie.he.0141@gmail.com>
Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"
Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Always run vCPU thread with blocked SIG_IPI
Peter Xu <peterx@redhat.com>
KVM: selftests: Sync data verify of dirty logging with guest sync
Eric Auger <eric.auger@redhat.com>
KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read
Marc Zyngier <maz@kernel.org>
KVM: arm64: Fully zero the vcpu state on reset
David Brazdil <dbrazdil@google.com>
KVM: arm64: Support PREL/PLT relocs in EL2 code
Sean Christopherson <seanjc@google.com>
KVM: Stop looking for coalesced MMIO zones if the bus is destroyed
Sean Christopherson <seanjc@google.com>
KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU
Eric Auger <eric.auger@redhat.com>
KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read
Sean Christopherson <seanjc@google.com>
KVM: nVMX: Truncate base/index GPR value on address calc in !64-bit
Sean Christopherson <seanjc@google.com>
KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit
Sean Christopherson <seanjc@google.com>
KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode
Sean Christopherson <seanjc@google.com>
KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch
Sean Christopherson <seanjc@google.com>
KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported
Sean Christopherson <seanjc@google.com>
KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created
Sean Christopherson <seanjc@google.com>
KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes
Sean Christopherson <seanjc@google.com>
KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs
Sean Christopherson <seanjc@google.com>
KVM: SVM: Don't strip the C-bit from CR2 on #PF interception
Sean Christopherson <seanjc@google.com>
KVM: nSVM: Set the shadow root level to the TDP level for nested NPT
Sean Christopherson <seanjc@google.com>
KVM: x86: Remove emulator's broken checks on CR0/CR3/CR4 loads
Sean Christopherson <seanjc@google.com>
KVM: x86: Check CR3 GPA for validity regardless of vCPU mode
Vitaly Kuznetsov <vkuznets@redhat.com>
KVM: x86: Properly handle APF vs disabled LAPIC situation
Wanpeng Li <wanpengli@tencent.com>
KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests
Sean Christopherson <seanjc@google.com>
KVM: x86/xen: Drop RAX[63:32] when processing hypercall
Sean Christopherson <seanjc@google.com>
KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit
Claudio Imbrenda <imbrenda@linux.ibm.com>
KVM: s390: extend kvm_s390_shadow_fault to return entry pointer
Claudio Imbrenda <imbrenda@linux.ibm.com>
KVM: s390: split kvm_s390_real_to_abs
Claudio Imbrenda <imbrenda@linux.ibm.com>
KVM: s390: VSIE: fix MVPG handling for prefixing and MSO
David Hildenbrand <david@redhat.com>
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
Heiko Carstens <hca@linux.ibm.com>
KVM: s390: fix guarded storage control register handling
Claudio Imbrenda <imbrenda@linux.ibm.com>
KVM: s390: split kvm_s390_logical_to_effective
Claudio Imbrenda <imbrenda@linux.ibm.com>
KVM: s390: VSIE: correctly handle MVPG when in VSIE
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32
Sami Loone <sami@loone.fi>
ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC662 quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
Victor Zhao <Victor.Zhao@amd.com>
drm/amdgpu: fix r initial values
Evan Quan <evan.quan@amd.com>
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
Christian König <christian.koenig@amd.com>
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
Harry Wentland <harry.wentland@amd.com>
drm/amd/display: Reject non-zero src_y and src_x for video planes
Paul Cercueil <paul@crapouillou.net>
drm: bridge/panel: Cleanup connector on bridge detach
Randy Dunlap <rdunlap@infradead.org>
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
Wayne Lin <Wayne.Lin@amd.com>
drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast
Wayne Lin <Wayne.Lin@amd.com>
drm/dp_mst: Revise broadcast msg lct & lcr
Colin Ian King <colin.king@canonical.com>
drm/radeon: fix copy of uninitialized variable back to userspace
Boris Brezillon <boris.brezillon@collabora.com>
drm/panfrost: Don't try to map pages that are already mapped
Boris Brezillon <boris.brezillon@collabora.com>
drm/panfrost: Clear MMU irqs before handling the fault
Paul Cercueil <paul@crapouillou.net>
drm/ingenic: Fix non-OSD mode
Gerd Hoffmann <kraxel@redhat.com>
drm/qxl: use ttm bo priorities
Maciej W. Rozycki <macro@orcam.me.uk>
FDDI: defxx: Make MMIO the configuration default except for EISA
Felix Fietkau <nbd@nbd.name>
mt76: fix potential DMA mapping leak
Ping-Ke Shih <pkshih@realtek.com>
rtw88: Fix array overrun in rtw_get_tx_power_params()
Johannes Berg <johannes.berg@intel.com>
cfg80211: scan: drop entry from hidden_list on overflow
Randy Dunlap <rdunlap@infradead.org>
net: xilinx: drivers need/depend on HAS_IOMEM
Dan Carpenter <dan.carpenter@oracle.com>
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
Ryder Lee <ryder.lee@mediatek.com>
mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()
Nathan Chancellor <nathan@kernel.org>
MIPS: generic: Update node names to avoid unit addresses
Maciej W. Rozycki <macro@orcam.me.uk>
MIPS: Reinstate platform `__div64_32' handler
Jan Glauber <jglauber@digitalocean.com>
md: Fix missing unused status line of /proc/mdstat
Zhao Heming <heming.zhao@suse.com>
md: md_open returns -EBUSY when entering racing area
Christoph Hellwig <hch@lst.de>
md: factor out a mddev_find_locked helper from mddev_find
Christoph Hellwig <hch@lst.de>
md: split mddev_find
Heming Zhao <heming.zhao@suse.com>
md-cluster: fix use-after-free issue when removing rdev
Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
md/bitmap: wait for external bitmap writes to complete during tear down
Xiao Ni <xni@redhat.com>
async_xor: increase src_offs when dropping destination page
Alison Schofield <alison.schofield@intel.com>
x86, sched: Treat Intel SNC topology as default, COD as exception
Paul Moore <paul@paul-moore.com>
selinux: add proper NULL termination to the secclass_map permissions
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
misc: vmw_vmci: explicitly initialize vmci_datagram payload
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
Kishon Vijay Abraham I <kishon@ti.com>
phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()
Hans de Goede <hdegoede@redhat.com>
misc: lis3lv02d: Fix false-positive WARN on various HP models
Kishon Vijay Abraham I <kishon@ti.com>
phy: cadence: Sierra: Fix PHY power_on sequence
Annaliese McDermond <nh6z@nh6z.net>
sc16is7xx: Defer probe if device read fails
Ye Xiang <xiang.ye@intel.com>
iio: hid-sensor-rotation: Fix quaternion data not correct
Gwendal Grignou <gwendal@chromium.org>
iio: sx9310: Fix access to variable DT array
Linus Walleij <linus.walleij@linaro.org>
iio: magnetometer: yas530: Fix return value on error path
Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio:adc:ad7476: Fix remove handling
Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio:accel:adis16201: Fix wrong axis assignment that prevents loading
Gwendal Grignou <gwendal@chromium.org>
iio: sx9310: Fix write_.._debounce()
Linus Walleij <linus.walleij@linaro.org>
iio: magnetometer: yas530: Include right header
Lars-Peter Clausen <lars@metafoo.de>
iio: inv_mpu6050: Fully validate gyro and accel scale writes
Dmitry Osipenko <digetx@gmail.com>
soc/tegra: regulators: Fix locking up when voltage-spread is out of range
Lukasz Luba <lukasz.luba@arm.com>
PM / devfreq: Unlock mutex and free devfreq struct in error path
Kishon Vijay Abraham I <kishon@ti.com>
PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
Dejin Zheng <zhengdejin5@gmail.com>
PCI: xgene: Fix cfg resource mapping
Sean Christopherson <seanjc@google.com>
KVM: x86: Defer the MMU unload to the normal path on an global INVPCID
Arun Easi <aeasi@marvell.com>
PCI: Allow VPD access for QLogic ISP2722
Maciej W. Rozycki <macro@orcam.me.uk>
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
MIPS: pci-rt2880: fix slot 0 configuration
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
MIPS: pci-mt7620: fix PLL lock check
Annaliese McDermond <nh6z@nh6z.net>
ASoC: tlv320aic32x4: Increase maximum register in regmap
Annaliese McDermond <nh6z@nh6z.net>
ASoC: tlv320aic32x4: Register clocks before registering component
Lukasz Majczak <lma@semihalf.com>
ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
ASoC: samsung: tm2_wm5110: check of of_parse return value
Chunfeng Yun <chunfeng.yun@mediatek.com>
usb: xhci-mtk: improve bandwidth scheduling with TT
Chunfeng Yun <chunfeng.yun@mediatek.com>
usb: xhci-mtk: remove or operator for setting schedule parameters
Johan Hovold <johan@kernel.org>
USB: serial: xr: fix CSIZE handling
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpm: update power supply once partner accepts
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply
Badhri Jagan Sridharan <badhri@google.com>
usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply
Randy Dunlap <rdunlap@infradead.org>
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
Johan Hovold <johan@kernel.org>
tty: mxser: fix TIOCSSERIAL permission check
Johan Hovold <johan@kernel.org>
staging: fwserial: fix TIOCSSERIAL permission check
Johan Hovold <johan@kernel.org>
tty: mxser: fix TIOCSSERIAL jiffies conversions
Johan Hovold <johan@kernel.org>
tty: moxa: fix TIOCSSERIAL permission check
Johan Hovold <johan@kernel.org>
staging: fwserial: fix TIOCSSERIAL jiffies conversions
Johan Hovold <johan@kernel.org>
USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check
Johan Hovold <johan@kernel.org>
staging: greybus: uart: fix TIOCSSERIAL jiffies conversions
Johan Hovold <johan@kernel.org>
USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions
Johan Hovold <johan@kernel.org>
tty: amiserial: fix TIOCSSERIAL permission check
Johan Hovold <johan@kernel.org>
tty: moxa: fix TIOCSSERIAL jiffies conversions
Hans de Goede <hdegoede@redhat.com>
usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode()
Johan Hovold <johan@kernel.org>
Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL"
Heikki Krogerus <heikki.krogerus@linux.intel.com>
software node: Allow node addition to already existing device
Mike Leach <mike.leach@linaro.org>
coresight: etm-perf: Fix define build issue when built as module
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
Or Cohen <orcohen@paloaltonetworks.com>
net/nfc: fix use-after-free llcp_sock_bind/connect
Lin Ma <linma@zju.edu.cn>
bluetooth: eliminate the potential race condition when removing the HCI controller
Archie Pusaka <apusaka@chromium.org>
Bluetooth: verify AMP hci_chan before amp_destroy
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 15 +-
.../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +-
Documentation/driver-api/xilinx/eemi.rst | 31 +-
.../userspace-api/media/v4l/subdev-formats.rst | 4 +-
Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 4 +-
arch/arm/boot/dts/exynos4210-i9100.dts | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 6 +-
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-p4note.dtsi | 4 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
.../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 2 +-
arch/arm/boot/dts/r8a7790-lager.dts | 3 +
arch/arm/boot/dts/r8a7791-koelsch.dts | 3 +
arch/arm/boot/dts/r8a7791-porter.dts | 2 +
arch/arm/boot/dts/r8a7793-gose.dts | 3 +
arch/arm/boot/dts/r8a7794-alt.dts | 3 +
arch/arm/boot/dts/r8a7794-silk.dts | 2 +
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 2 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 21 +-
arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +-
arch/arm/crypto/blake2s-core.S | 21 +
arch/arm/crypto/poly1305-glue.c | 2 +-
.../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 7 +
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 35 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 33 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 +-
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 3 +
.../boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts | 3 +
.../boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts | 3 +
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 2 +
.../boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts | 3 +
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 +-
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 3 +
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 5 +-
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 3 +
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1 +
arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 +
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +-
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 4 +-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 17 +-
arch/arm64/crypto/aes-modes.S | 1 +
arch/arm64/crypto/poly1305-glue.c | 2 +-
arch/arm64/include/asm/kvm_host.h | 1 +
arch/arm64/kvm/arm.c | 6 +-
arch/arm64/kvm/debug.c | 88 ++--
arch/arm64/kvm/hyp/nvhe/gen-hyprel.c | 18 +
arch/arm64/kvm/reset.c | 5 +
arch/arm64/kvm/vgic/vgic-kvm-device.c | 7 +-
arch/ia64/kernel/acpi.c | 7 +-
arch/ia64/kernel/efi.c | 11 +-
arch/m68k/include/asm/mvme147hw.h | 3 +
arch/m68k/kernel/sys_m68k.c | 2 +
arch/m68k/mvme147/config.c | 14 +-
arch/m68k/mvme16x/config.c | 14 +-
arch/mips/Kconfig | 1 +
arch/mips/boot/dts/brcm/bcm3368.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm63268.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6358.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6362.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6368.dtsi | 2 +-
arch/mips/crypto/poly1305-glue.c | 2 +-
arch/mips/generic/board-boston.its.S | 10 +-
arch/mips/generic/board-jaguar2.its.S | 16 +-
arch/mips/generic/board-luton.its.S | 8 +-
arch/mips/generic/board-ni169445.its.S | 10 +-
arch/mips/generic/board-ocelot.its.S | 20 +-
arch/mips/generic/board-serval.its.S | 8 +-
arch/mips/generic/board-xilfpga.its.S | 10 +-
arch/mips/generic/vmlinux.its.S | 10 +-
arch/mips/include/asm/asmmacro.h | 3 +-
arch/mips/include/asm/div64.h | 57 ++-
arch/mips/loongson64/init.c | 2 +-
arch/mips/pci/pci-legacy.c | 9 +-
arch/mips/pci/pci-mt7620.c | 5 +-
arch/mips/pci/pci-rt2880.c | 37 +-
arch/powerpc/Kconfig | 2 +-
arch/powerpc/Kconfig.debug | 1 +
arch/powerpc/include/asm/book3s/64/pgtable.h | 4 +-
arch/powerpc/include/asm/book3s/64/radix.h | 6 +-
arch/powerpc/include/asm/fixmap.h | 9 +
arch/powerpc/include/asm/nohash/64/pgtable.h | 5 +-
arch/powerpc/include/asm/smp.h | 5 +
arch/powerpc/kernel/fadump.c | 2 +-
arch/powerpc/kernel/interrupt.c | 4 +-
arch/powerpc/kernel/prom.c | 2 +-
arch/powerpc/kernel/smp.c | 39 +-
arch/powerpc/kvm/book3s_hv.c | 3 +
arch/powerpc/mm/book3s64/hash_pgtable.c | 6 +-
arch/powerpc/mm/book3s64/hash_utils.c | 4 +-
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +-
arch/powerpc/mm/mem.c | 2 +-
arch/powerpc/perf/isa207-common.c | 4 +-
arch/powerpc/perf/power10-events-list.h | 4 +-
arch/powerpc/platforms/52xx/lite5200_sleep.S | 2 +-
arch/powerpc/platforms/pseries/iommu.c | 2 +-
arch/powerpc/platforms/pseries/lpar.c | 4 +-
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +-
arch/powerpc/platforms/pseries/vio.c | 4 +
arch/powerpc/sysdev/xive/common.c | 35 +-
arch/s390/kernel/setup.c | 4 +-
arch/s390/kvm/gaccess.c | 30 +-
arch/s390/kvm/gaccess.h | 60 ++-
arch/s390/kvm/kvm-s390.c | 4 +-
arch/s390/kvm/vsie.c | 109 ++++-
arch/x86/Kconfig | 1 +
arch/x86/crypto/poly1305_glue.c | 6 +-
arch/x86/entry/vdso/vdso2c.h | 2 +-
arch/x86/events/amd/iommu.c | 6 +-
arch/x86/events/amd/uncore.c | 6 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 3 +
arch/x86/kernel/cpu/microcode/core.c | 8 +-
arch/x86/kernel/e820.c | 4 +-
arch/x86/kernel/kprobes/core.c | 23 +-
arch/x86/kernel/smpboot.c | 90 ++--
arch/x86/kvm/emulate.c | 80 +---
arch/x86/kvm/lapic.c | 6 +
arch/x86/kvm/mmu/mmu.c | 63 ++-
arch/x86/kvm/svm/sev.c | 42 +-
arch/x86/kvm/svm/svm.c | 44 +-
arch/x86/kvm/vmx/nested.c | 17 +-
arch/x86/kvm/vmx/vmx.c | 19 +-
arch/x86/kvm/x86.c | 18 +-
arch/x86/kvm/xen.c | 2 +-
arch/x86/power/hibernate.c | 89 +---
crypto/async_tx/async_xor.c | 1 +
drivers/acpi/cppc_acpi.c | 14 +-
drivers/ata/libahci_platform.c | 4 +-
drivers/ata/pata_arasan_cf.c | 15 +-
drivers/ata/pata_ixp4xx_cf.c | 6 +-
drivers/ata/sata_mv.c | 4 +
drivers/base/devtmpfs.c | 2 +-
drivers/base/node.c | 26 +-
drivers/base/regmap/regmap-debugfs.c | 1 +
drivers/base/swnode.c | 5 +-
drivers/block/ataflop.c | 16 +-
drivers/block/null_blk/zoned.c | 1 +
drivers/block/rnbd/rnbd-clt-sysfs.c | 6 +-
drivers/block/xen-blkback/common.h | 1 +
drivers/block/xen-blkback/xenbus.c | 38 +-
drivers/bus/qcom-ebi2.c | 4 +-
drivers/bus/ti-sysc.c | 6 +-
drivers/char/tpm/tpm_tis_i2c_cr50.c | 1 +
drivers/char/ttyprintk.c | 11 +
drivers/clk/clk-ast2600.c | 4 +-
drivers/clk/imx/clk-imx25.c | 12 +-
drivers/clk/imx/clk-imx27.c | 13 +-
drivers/clk/imx/clk-imx35.c | 10 +-
drivers/clk/imx/clk-imx5.c | 30 +-
drivers/clk/imx/clk-imx6q.c | 16 +-
drivers/clk/imx/clk-imx6sl.c | 16 +-
drivers/clk/imx/clk-imx6sll.c | 24 +-
drivers/clk/imx/clk-imx6sx.c | 16 +-
drivers/clk/imx/clk-imx7d.c | 22 +-
drivers/clk/imx/clk-imx7ulp.c | 31 +-
drivers/clk/imx/clk-imx8mm.c | 18 +-
drivers/clk/imx/clk-imx8mn.c | 18 +-
drivers/clk/imx/clk-imx8mp.c | 17 +-
drivers/clk/imx/clk-imx8mq.c | 18 +-
drivers/clk/imx/clk.c | 41 +-
drivers/clk/imx/clk.h | 4 +-
drivers/clk/mvebu/armada-37xx-periph.c | 83 ++--
drivers/clk/qcom/a53-pll.c | 1 +
drivers/clk/qcom/a7-pll.c | 1 +
drivers/clk/qcom/apss-ipq-pll.c | 1 +
drivers/clk/uniphier/clk-uniphier-mux.c | 4 +-
drivers/clk/zynqmp/pll.c | 24 +-
drivers/clocksource/ingenic-ost.c | 4 +-
drivers/clocksource/timer-ti-dm-systimer.c | 13 +-
drivers/cpufreq/armada-37xx-cpufreq.c | 76 +++-
drivers/cpuidle/Kconfig.arm | 2 +-
drivers/crypto/allwinner/Kconfig | 14 +-
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 9 +-
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c | 4 +-
drivers/crypto/ccp/sev-dev.c | 3 +
drivers/crypto/ccp/tee-dev.c | 49 +-
drivers/crypto/ccp/tee-dev.h | 20 +-
drivers/crypto/chelsio/chcr_algo.c | 19 +-
drivers/crypto/keembay/keembay-ocs-aes-core.c | 4 +-
drivers/crypto/keembay/keembay-ocs-hcu-core.c | 4 +-
drivers/crypto/qat/qat_c3xxxvf/adf_drv.c | 4 +-
drivers/crypto/qat/qat_c62xvf/adf_drv.c | 4 +-
drivers/crypto/qat/qat_common/adf_isr.c | 29 +-
drivers/crypto/qat/qat_common/adf_transport.c | 1 +
drivers/crypto/qat/qat_common/adf_vf_isr.c | 17 +-
drivers/crypto/qat/qat_dh895xccvf/adf_drv.c | 4 +-
drivers/crypto/sa2ul.c | 8 +-
drivers/devfreq/devfreq.c | 5 +-
drivers/firmware/Kconfig | 1 +
drivers/firmware/qcom_scm-smc.c | 12 +-
drivers/firmware/qcom_scm.c | 88 ++--
drivers/firmware/qcom_scm.h | 7 +-
drivers/firmware/xilinx/zynqmp.c | 5 +-
drivers/fpga/xilinx-spi.c | 24 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c | 19 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h | 1 +
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 +-
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 4 +
drivers/gpu/drm/amd/amdkfd/kfd_iommu.c | 6 +
drivers/gpu/drm/amd/amdkfd/kfd_iommu.h | 9 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 20 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 1 +
drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 2 +-
drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c | 6 +-
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c | 2 +-
.../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 26 +-
drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c | 9 +-
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 1 +
drivers/gpu/drm/bridge/Kconfig | 3 +
drivers/gpu/drm/bridge/analogix/Kconfig | 1 +
drivers/gpu/drm/bridge/panel.c | 12 +
drivers/gpu/drm/drm_dp_mst_topology.c | 17 +-
drivers/gpu/drm/drm_probe_helper.c | 7 +-
drivers/gpu/drm/i915/gvt/gvt.c | 8 +-
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +-
drivers/gpu/drm/mcde/mcde_dsi.c | 2 +-
drivers/gpu/drm/mediatek/mtk_hdmi.c | 174 +++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +-
drivers/gpu/drm/msm/msm_debugfs.c | 14 +-
drivers/gpu/drm/msm/msm_drv.c | 3 +
drivers/gpu/drm/msm/msm_drv.h | 9 +-
drivers/gpu/drm/msm/msm_gem.c | 14 +-
drivers/gpu/drm/msm/msm_gem.h | 12 +-
drivers/gpu/drm/omapdrm/dss/dsi.c | 3 +-
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 3 +-
drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 4 +-
drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c | 1 -
drivers/gpu/drm/panel/panel-simple.c | 11 +-
drivers/gpu/drm/panel/panel-sony-acx424akp.c | 3 +-
drivers/gpu/drm/panfrost/panfrost_mmu.c | 13 +-
drivers/gpu/drm/qxl/qxl_cmd.c | 2 +-
drivers/gpu/drm/qxl/qxl_display.c | 4 +-
drivers/gpu/drm/qxl/qxl_drv.c | 2 -
drivers/gpu/drm/qxl/qxl_gem.c | 2 +-
drivers/gpu/drm/qxl/qxl_object.c | 5 +-
drivers/gpu/drm/qxl/qxl_object.h | 1 +
drivers/gpu/drm/qxl/qxl_release.c | 18 +-
drivers/gpu/drm/radeon/radeon_dp_mst.c | 3 +
drivers/gpu/drm/radeon/radeon_kms.c | 1 +
drivers/gpu/drm/stm/ltdc.c | 33 +-
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 9 +
drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +-
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-lenovo.c | 47 +-
drivers/hid/hid-plantronics.c | 60 ++-
drivers/hsi/hsi_core.c | 3 +-
drivers/hv/channel.c | 2 +-
drivers/hv/channel_mgmt.c | 30 +-
drivers/hv/ring_buffer.c | 1 -
drivers/hwmon/pmbus/pxe1610.c | 9 +
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +-
drivers/i2c/busses/i2c-cadence.c | 9 +-
drivers/i2c/busses/i2c-emev2.c | 5 +-
drivers/i2c/busses/i2c-img-scb.c | 4 +-
drivers/i2c/busses/i2c-imx-lpi2c.c | 2 +-
drivers/i2c/busses/i2c-imx.c | 4 +-
drivers/i2c/busses/i2c-jz4780.c | 5 +-
drivers/i2c/busses/i2c-mlxbf.c | 2 +
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
drivers/i2c/busses/i2c-omap.c | 8 +-
drivers/i2c/busses/i2c-rcar.c | 5 +-
drivers/i2c/busses/i2c-sh7760.c | 5 +-
drivers/i2c/busses/i2c-sprd.c | 4 +-
drivers/i2c/busses/i2c-stm32f7.c | 12 +-
drivers/i2c/busses/i2c-xiic.c | 4 +-
drivers/i3c/master.c | 5 +-
drivers/iio/accel/adis16201.c | 2 +-
drivers/iio/adc/Kconfig | 2 +-
drivers/iio/adc/ad7476.c | 18 +-
drivers/iio/imu/adis16480.c | 128 ++++--
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 20 +-
drivers/iio/magnetometer/yamaha-yas530.c | 4 +-
drivers/iio/orientation/hid-sensor-rotation.c | 13 +-
drivers/iio/proximity/sx9310.c | 52 ++-
drivers/infiniband/core/cm.c | 3 +-
drivers/infiniband/core/cma.c | 12 +-
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 1 +
drivers/infiniband/hw/bnxt_re/qplib_res.c | 1 +
drivers/infiniband/hw/cxgb4/resource.c | 2 +-
drivers/infiniband/hw/hfi1/firmware.c | 1 +
drivers/infiniband/hw/hfi1/mmu_rb.c | 2 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 +
drivers/infiniband/hw/i40iw/i40iw_pble.c | 6 +-
drivers/infiniband/hw/mlx5/fs.c | 9 +-
drivers/infiniband/hw/mlx5/main.c | 6 +-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 103 +++--
drivers/infiniband/hw/mlx5/mr.c | 14 +-
drivers/infiniband/hw/mlx5/odp.c | 1 -
drivers/infiniband/hw/mlx5/qp.c | 15 +-
drivers/infiniband/hw/qedr/qedr_iw_cm.c | 4 +-
drivers/infiniband/sw/rxe/rxe_av.c | 2 +-
drivers/infiniband/sw/siw/siw_mem.c | 4 +-
drivers/infiniband/ulp/isert/ib_isert.c | 16 +-
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
drivers/infiniband/ulp/srpt/ib_srpt.c | 1 +
drivers/iommu/amd/init.c | 2 +-
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 2 +-
drivers/iommu/dma-iommu.c | 13 +-
drivers/iommu/intel/iommu.c | 38 +-
drivers/iommu/intel/irq_remapping.c | 2 +-
drivers/iommu/intel/pasid.c | 16 +
drivers/iommu/intel/pasid.h | 1 +
drivers/iommu/intel/svm.c | 18 +-
drivers/iommu/iommu.c | 24 +-
drivers/iommu/mtk_iommu.c | 19 +-
drivers/irqchip/irq-gic-v3-mbi.c | 2 +-
drivers/mailbox/sprd-mailbox.c | 43 +-
drivers/md/bcache/writeback.c | 6 +-
drivers/md/md-bitmap.c | 2 +
drivers/md/md.c | 73 +--
drivers/media/common/saa7146/saa7146_core.c | 2 +-
drivers/media/common/saa7146/saa7146_video.c | 3 +-
drivers/media/dvb-frontends/m88ds3103.c | 4 +-
drivers/media/i2c/ccs/ccs-core.c | 4 +-
drivers/media/i2c/imx219.c | 49 +-
drivers/media/i2c/rdacm21.c | 2 +-
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 2 +-
drivers/media/pci/saa7134/saa7134-core.c | 2 +-
drivers/media/platform/Kconfig | 3 +
drivers/media/platform/aspeed-video.c | 9 +-
drivers/media/platform/meson/ge2d/ge2d.c | 4 +-
drivers/media/platform/qcom/venus/core.c | 7 +-
.../platform/rockchip/rkisp1/rkisp1-resizer.c | 9 +-
.../media/platform/sunxi/sun6i-csi/sun6i_video.c | 4 +-
drivers/media/test-drivers/vivid/vivid-vid-out.c | 2 +-
drivers/media/tuners/m88rs6000t.c | 6 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 17 +-
drivers/memory/omap-gpmc.c | 7 +-
drivers/memory/pl353-smc.c | 2 +-
drivers/memory/renesas-rpc-if.c | 2 +-
drivers/memory/samsung/exynos5422-dmc.c | 4 +-
drivers/mfd/intel_pmt.c | 11 +-
drivers/mfd/stm32-timers.c | 7 +-
drivers/mfd/stmpe.c | 14 +-
drivers/misc/lis3lv02d/lis3lv02d.c | 21 +-
drivers/misc/vmw_vmci/vmci_doorbell.c | 2 +-
drivers/misc/vmw_vmci/vmci_guest.c | 2 +-
drivers/mtd/maps/physmap-core.c | 4 +-
drivers/mtd/mtdchar.c | 8 +-
drivers/mtd/mtdcore.c | 3 +
drivers/mtd/mtdpart.c | 2 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 +
drivers/mtd/nand/raw/fsmc_nand.c | 2 +
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 7 +-
drivers/mtd/parsers/qcomsmempart.c | 9 +-
drivers/net/dsa/bcm_sf2.c | 58 ++-
drivers/net/dsa/bcm_sf2_regs.h | 3 +-
drivers/net/dsa/mv88e6xxx/devlink.c | 2 +-
drivers/net/dsa/mv88e6xxx/serdes.c | 6 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +-
.../net/ethernet/cavium/liquidio/cn23xx_pf_regs.h | 2 +-
drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 22 +-
drivers/net/ethernet/freescale/Makefile | 4 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 +-
.../net/ethernet/marvell/prestera/prestera_main.c | 3 +-
.../net/ethernet/mellanox/mlx5/core/fpga/ipsec.c | 2 +-
.../mellanox/mlx5/core/steering/dr_ste_v1.c | 1 +
drivers/net/ethernet/netronome/nfp/nfp_devlink.c | 1 +
drivers/net/ethernet/qualcomm/emac/emac-mac.c | 4 +-
drivers/net/ethernet/renesas/ravb_main.c | 35 +-
drivers/net/ethernet/sfc/ef10.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +-
drivers/net/ethernet/ti/davinci_emac.c | 4 +-
drivers/net/ethernet/xilinx/Kconfig | 3 +
drivers/net/ethernet/xscale/ixp4xx_eth.c | 5 +-
drivers/net/fddi/Kconfig | 15 +-
drivers/net/fddi/defxx.c | 47 +-
drivers/net/geneve.c | 4 +-
drivers/net/phy/intel-xway.c | 21 +
drivers/net/phy/marvell.c | 52 ++-
drivers/net/phy/smsc.c | 7 +-
drivers/net/wan/hdlc_fr.c | 5 +-
drivers/net/wan/lapbether.c | 32 +-
drivers/net/wireless/ath/ath10k/htc.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 +
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
drivers/net/wireless/intel/ipw2x00/libipw_wx.c | 6 +-
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 20 +-
drivers/net/wireless/marvell/mwl8k.c | 1 +
drivers/net/wireless/mediatek/mt76/dma.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 56 +--
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 28 +-
drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 10 +-
.../net/wireless/mediatek/mt76/mt7615/pci_init.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7615/regs.h | 7 +-
.../net/wireless/mediatek/mt76/mt7615/sdio_txrx.c | 11 +-
.../net/wireless/mediatek/mt76/mt7615/usb_sdio.c | 7 +-
.../net/wireless/mediatek/mt76/mt76_connac_mcu.c | 6 +-
.../net/wireless/mediatek/mt76/mt7915/debugfs.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 52 +--
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 11 +-
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 85 ++--
drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h | 10 +-
.../net/wireless/mediatek/mt76/mt7921/debugfs.c | 10 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 192 ++++----
drivers/net/wireless/mediatek/mt76/mt7921/mac.h | 10 +-
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 11 +-
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 44 ++
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h | 13 +-
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 26 +-
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 27 +-
drivers/net/wireless/mediatek/mt76/sdio.c | 3 +
drivers/net/wireless/mediatek/mt76/tx.c | 15 +-
drivers/net/wireless/mediatek/mt7601u/eeprom.c | 2 +-
drivers/net/wireless/microchip/wilc1000/sdio.c | 2 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/table.c | 500 +++++++++++++++------
drivers/net/wireless/realtek/rtw88/debug.c | 2 +-
drivers/net/wireless/realtek/rtw88/pci.c | 19 +-
drivers/net/wireless/realtek/rtw88/pci.h | 1 +
drivers/net/wireless/realtek/rtw88/phy.c | 5 +-
drivers/net/wireless/ti/wlcore/boot.c | 13 +-
drivers/net/wireless/ti/wlcore/debugfs.h | 7 +-
drivers/nfc/pn533/pn533.c | 3 +
drivers/nvme/host/multipath.c | 4 +
drivers/nvme/host/pci.c | 2 +-
drivers/nvme/host/tcp.c | 4 +-
drivers/nvme/target/tcp.c | 43 +-
drivers/nvmem/Kconfig | 1 +
drivers/nvmem/qfprom.c | 21 +
drivers/of/overlay.c | 1 +
drivers/pci/controller/dwc/pci-keystone.c | 3 +-
drivers/pci/controller/pci-xgene.c | 3 +-
drivers/pci/vpd.c | 1 -
drivers/phy/cadence/phy-cadence-sierra.c | 7 +-
drivers/phy/ingenic/phy-ingenic-usb.c | 4 +-
drivers/phy/marvell/Kconfig | 4 +-
drivers/phy/ralink/phy-mt7621-pci.c | 6 +-
drivers/phy/ti/phy-j721e-wiz.c | 23 +-
drivers/pinctrl/pinctrl-at91-pio4.c | 8 +-
drivers/pinctrl/pinctrl-single.c | 63 +--
drivers/platform/surface/aggregator/controller.c | 2 +-
drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 32 +-
drivers/platform/x86/pmc_atom.c | 28 +-
drivers/power/supply/bq25980_charger.c | 40 +-
drivers/power/supply/bq27xxx_battery.c | 2 +-
drivers/regulator/bd9576-regulator.c | 11 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 57 ++-
drivers/scsi/jazz_esp.c | 4 +-
drivers/scsi/lpfc/lpfc_els.c | 50 +--
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 4 +-
drivers/scsi/qla2xxx/qla_bsg.c | 4 +
drivers/scsi/sni_53c710.c | 5 +-
drivers/scsi/sun3x_esp.c | 4 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
drivers/soc/aspeed/aspeed-lpc-snoop.c | 4 +-
drivers/soc/mediatek/mtk-pm-domains.c | 5 +-
drivers/soc/qcom/mdt_loader.c | 17 +
drivers/soc/qcom/pdr_interface.c | 2 +-
drivers/soc/tegra/regulators-tegra30.c | 2 +-
drivers/soundwire/bus.c | 3 +-
drivers/soundwire/stream.c | 10 +-
drivers/spi/spi-fsl-lpspi.c | 2 +-
drivers/spi/spi-fsl-spi.c | 23 +-
drivers/spi/spi-rockchip.c | 13 +-
drivers/spi/spi-stm32.c | 27 +-
drivers/spi/spi-zynqmp-gqspi.c | 168 ++++---
drivers/spi/spi.c | 9 +-
.../staging/comedi/drivers/tests/ni_routes_test.c | 6 +-
drivers/staging/fwserial/fwserial.c | 19 +-
drivers/staging/greybus/uart.c | 13 +-
drivers/staging/media/atomisp/i2c/atomisp-lm3554.c | 19 +-
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 4 +-
drivers/staging/media/atomisp/pci/hmm/hmm_bo.c | 13 +-
drivers/staging/media/omap4iss/iss.c | 4 +-
drivers/staging/media/rkvdec/rkvdec.c | 48 +-
drivers/staging/media/rkvdec/rkvdec.h | 1 -
drivers/staging/media/sunxi/cedrus/cedrus_regs.h | 17 +-
drivers/staging/qlge/qlge_main.c | 6 +-
drivers/staging/rtl8192u/r8192U_core.c | 2 +-
drivers/tty/amiserial.c | 1 +
drivers/tty/moxa.c | 18 +-
drivers/tty/mxser.c | 31 +-
drivers/tty/serial/liteuart.c | 4 +-
drivers/tty/serial/omap-serial.c | 51 ++-
drivers/tty/serial/sc16is7xx.c | 2 +-
drivers/tty/serial/serial_core.c | 6 +-
drivers/tty/serial/stm32-usart.c | 184 +++++---
drivers/tty/serial/stm32-usart.h | 3 -
drivers/tty/tty_io.c | 10 +-
drivers/tty/tty_ioctl.c | 4 +-
drivers/usb/cdns3/cdnsp-gadget.c | 17 +-
drivers/usb/cdns3/cdnsp-gadget.h | 1 +
drivers/usb/class/cdc-acm.c | 16 +-
drivers/usb/dwc2/core_intr.c | 154 ++++---
drivers/usb/dwc2/hcd.c | 10 +-
drivers/usb/gadget/udc/aspeed-vhub/core.c | 3 +-
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 2 +-
drivers/usb/gadget/udc/fotg210-udc.c | 26 +-
drivers/usb/gadget/udc/pch_udc.c | 123 +++--
drivers/usb/gadget/udc/r8a66597-udc.c | 2 +
drivers/usb/gadget/udc/s3c2410_udc.c | 24 +-
drivers/usb/gadget/udc/snps_udc_plat.c | 4 +-
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/xhci-mtk-sch.c | 80 +++-
drivers/usb/host/xhci-mtk.h | 6 +-
drivers/usb/roles/class.c | 2 +
drivers/usb/serial/ti_usb_3410_5052.c | 9 +-
drivers/usb/serial/usb_wwan.c | 9 +-
drivers/usb/serial/xr_serial.c | 5 +
drivers/usb/typec/stusb160x.c | 4 +-
drivers/usb/typec/tcpm/tcpci.c | 21 +-
drivers/usb/typec/tcpm/tcpm.c | 197 +++++---
drivers/usb/typec/tps6598x.c | 4 +-
drivers/usb/usbip/vudc_sysfs.c | 2 +
drivers/vfio/fsl-mc/vfio_fsl_mc.c | 74 +--
drivers/vfio/mdev/mdev_sysfs.c | 2 +-
drivers/vfio/pci/vfio_pci.c | 131 ++++--
fs/afs/dir.c | 7 +
fs/afs/dir_silly.c | 3 +
fs/afs/fs_operation.c | 6 +
fs/afs/inode.c | 12 +-
fs/afs/internal.h | 2 +
fs/afs/write.c | 1 +
fs/btrfs/tree-log.c | 12 +-
fs/btrfs/volumes.c | 2 +
fs/dlm/lowcomms.c | 1 +
fs/fuse/dev.c | 7 +-
fs/io_uring.c | 14 +-
fs/nfsd/nfs4proc.c | 4 +-
fs/overlayfs/copy_up.c | 3 +-
fs/overlayfs/overlayfs.h | 30 +-
fs/overlayfs/readdir.c | 12 -
fs/overlayfs/super.c | 2 +
fs/overlayfs/util.c | 31 +-
fs/proc/array.c | 2 +
fs/xfs/libxfs/xfs_attr.c | 1 +
include/crypto/internal/poly1305.h | 3 +-
include/crypto/poly1305.h | 6 +-
include/keys/trusted-type.h | 1 +
include/linux/dma-iommu.h | 2 +
include/linux/firmware/xlnx-zynqmp.h | 5 -
include/linux/gpio/driver.h | 9 +
include/linux/hid.h | 2 +
include/linux/intel-iommu.h | 1 +
include/linux/iommu.h | 2 +-
include/linux/kvm_host.h | 4 +-
include/linux/mlx5/driver.h | 2 +-
include/linux/platform_device.h | 3 +
include/linux/pm_runtime.h | 2 +-
include/linux/smp.h | 2 +-
include/linux/spi/spi.h | 3 +
include/linux/tty_driver.h | 2 +-
include/linux/udp.h | 16 +-
include/linux/usb/pd.h | 2 +
include/net/addrconf.h | 1 -
include/net/bluetooth/hci_core.h | 1 +
include/net/netfilter/nf_tables_offload.h | 12 +-
include/uapi/linux/tty_flags.h | 4 +-
init/init_task.c | 2 +-
kernel/bpf/ringbuf.c | 24 +-
kernel/bpf/verifier.c | 30 +-
kernel/kthread.c | 33 +-
kernel/printk/printk.c | 9 +-
kernel/rcu/tree.c | 1 -
kernel/sched/core.c | 2 +-
kernel/sched/debug.c | 42 +-
kernel/sched/fair.c | 5 +-
kernel/sched/sched.h | 7 +
kernel/smp.c | 20 +-
kernel/up.c | 2 +-
lib/bug.c | 33 +-
lib/crypto/poly1305-donna32.c | 3 +-
lib/crypto/poly1305-donna64.c | 3 +-
lib/crypto/poly1305.c | 3 +-
mm/memcontrol.c | 10 +-
mm/memory-failure.c | 2 +-
mm/slub.c | 9 +
mm/sparse.c | 1 +
net/bluetooth/hci_conn.c | 4 -
net/bluetooth/hci_event.c | 3 +-
net/bluetooth/hci_request.c | 12 +-
net/bridge/br_multicast.c | 33 +-
net/core/dev.c | 14 +-
net/ipv4/route.c | 42 +-
net/ipv4/tcp_cong.c | 4 +
net/ipv4/udp.c | 3 +
net/ipv4/udp_offload.c | 19 +-
net/ipv6/mcast_snoop.c | 12 +-
net/mac80211/main.c | 7 +-
net/mptcp/protocol.c | 29 +-
net/netfilter/nf_tables_offload.c | 44 ++
net/netfilter/nft_cmp.c | 41 +-
net/netfilter/nft_payload.c | 13 +-
net/nfc/digital_dep.c | 2 +
net/nfc/llcp_sock.c | 4 +
net/packet/af_packet.c | 15 +-
net/packet/internal.h | 2 +-
net/sched/act_ct.c | 6 +-
net/sctp/socket.c | 38 +-
net/tipc/crypto.c | 2 +
net/vmw_vsock/virtio_transport_common.c | 28 +-
net/vmw_vsock/vmci_transport.c | 3 +-
net/wireless/scan.c | 2 +
net/xdp/xsk.c | 8 +-
samples/kfifo/bytestream-example.c | 8 +-
samples/kfifo/inttype-example.c | 8 +-
samples/kfifo/record-example.c | 8 +-
security/integrity/ima/ima_template.c | 4 +-
security/keys/trusted-keys/trusted_tpm1.c | 32 +-
security/keys/trusted-keys/trusted_tpm2.c | 10 +-
security/selinux/include/classmap.h | 5 +-
sound/core/init.c | 2 -
sound/pci/hda/patch_realtek.c | 162 ++++---
sound/soc/codecs/ak5558.c | 4 +-
sound/soc/codecs/tlv320aic32x4.c | 12 +-
sound/soc/codecs/wm8960.c | 12 +-
sound/soc/generic/audio-graph-card.c | 2 +-
sound/soc/generic/simple-card.c | 2 +-
sound/soc/intel/Makefile | 2 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 38 +-
sound/soc/intel/boards/sof_wm8804.c | 6 +-
sound/soc/intel/skylake/Makefile | 2 +-
sound/soc/qcom/qdsp6/q6afe-clocks.c | 209 ++++-----
sound/soc/qcom/qdsp6/q6afe.c | 2 +-
sound/soc/qcom/qdsp6/q6afe.h | 2 +-
sound/soc/samsung/tm2_wm5110.c | 2 +-
sound/soc/tegra/tegra30_i2s.c | 40 +-
sound/usb/card.c | 14 +-
sound/usb/midi.c | 2 +-
sound/usb/quirks.c | 16 +-
sound/usb/usbaudio.h | 2 +
tools/bpf/bpftool/btf.c | 3 +
tools/bpf/bpftool/main.c | 3 +-
tools/bpf/bpftool/map.c | 2 +-
tools/lib/bpf/bpf_core_read.h | 16 +-
tools/lib/bpf/bpf_tracing.h | 40 +-
tools/lib/bpf/btf.h | 1 +
tools/lib/bpf/libbpf.h | 1 +
tools/lib/perf/include/perf/event.h | 7 +-
tools/perf/pmu-events/arch/x86/amdzen1/cache.json | 2 +-
.../pmu-events/arch/x86/amdzen1/recommended.json | 6 +-
tools/perf/pmu-events/arch/x86/amdzen2/cache.json | 2 +-
.../pmu-events/arch/x86/amdzen2/recommended.json | 6 +-
tools/perf/trace/beauty/fsconfig.sh | 7 +-
tools/perf/util/jitdump.c | 30 +-
tools/perf/util/session.c | 15 +-
tools/perf/util/symbol_fprintf.c | 2 +-
tools/power/x86/turbostat/turbostat.c | 62 +--
tools/spi/Makefile | 5 +-
tools/testing/selftests/bpf/Makefile | 5 +-
.../testing/selftests/bpf/prog_tests/core_reloc.c | 51 ++-
...tf__core_reloc_existence___err_wrong_arr_kind.c | 3 -
...re_reloc_existence___err_wrong_arr_value_type.c | 3 -
...tf__core_reloc_existence___err_wrong_int_kind.c | 3 -
.../btf__core_reloc_existence___err_wrong_int_sz.c | 3 -
...tf__core_reloc_existence___err_wrong_int_type.c | 3 -
..._core_reloc_existence___err_wrong_struct_type.c | 3 -
.../btf__core_reloc_existence___wrong_field_defs.c | 3 +
.../testing/selftests/bpf/progs/core_reloc_types.h | 20 +-
.../testing/selftests/bpf/verifier/array_access.c | 2 +-
.../selftests/drivers/net/mlxsw/port_scale.sh | 6 +-
.../selftests/drivers/net/mlxsw/tc_flower_scale.sh | 6 +-
tools/testing/selftests/kvm/dirty_log_test.c | 69 ++-
tools/testing/selftests/lib.mk | 3 +-
.../net/forwarding/mirror_gre_vlan_bridge_1q.sh | 2 +-
tools/testing/selftests/x86/thunks_32.S | 2 +
virt/kvm/coalesced_mmio.c | 19 +-
virt/kvm/kvm_main.c | 20 +-
677 files changed, 6153 insertions(+), 3838 deletions(-)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 001/677] Bluetooth: verify AMP hci_chan before amp_destroy
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 002/677] bluetooth: eliminate the potential race condition when removing the HCI controller Greg Kroah-Hartman
` (682 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Archie Pusaka,
syzbot+98228e7407314d2d4ba2, Alain Michaud,
Abhishek Pandit-Subedi, Marcel Holtmann, George Kennedy
From: Archie Pusaka <apusaka@chromium.org>
commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Example crash call trace:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe3/0x144 lib/dump_stack.c:118
print_address_description+0x67/0x22a mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report mm/kasan/report.c:412 [inline]
kasan_report+0x251/0x28f mm/kasan/report.c:396
hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free mm/kasan/kasan.c:521 [inline]
__kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
slab_free mm/slub.c:3009 [inline]
kfree+0x182/0x21e mm/slub.c:3972
hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_event.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -704,6 +704,7 @@ struct hci_chan {
struct sk_buff_head data_q;
unsigned int sent;
__u8 state;
+ bool amp;
};
struct hci_conn_params {
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5005,6 +5005,7 @@ static void hci_loglink_complete_evt(str
return;
hchan->handle = le16_to_cpu(ev->handle);
+ hchan->amp = true;
BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan);
@@ -5037,7 +5038,7 @@ static void hci_disconn_loglink_complete
hci_dev_lock(hdev);
hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle));
- if (!hchan)
+ if (!hchan || !hchan->amp)
goto unlock;
amp_destroy_logical_link(hchan, ev->reason);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 002/677] bluetooth: eliminate the potential race condition when removing the HCI controller
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 001/677] Bluetooth: verify AMP hci_chan before amp_destroy Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 003/677] net/nfc: fix use-after-free llcp_sock_bind/connect Greg Kroah-Hartman
` (681 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lin Ma, Marcel Holtmann
From: Lin Ma <linma@zju.edu.cn>
commit e2cb6b891ad2b8caa9131e3be70f45243df82a80 upstream.
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/hci_request.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -272,12 +272,16 @@ int hci_req_sync(struct hci_dev *hdev, i
{
int ret;
- if (!test_bit(HCI_UP, &hdev->flags))
- return -ENETDOWN;
-
/* Serialize all requests */
hci_req_sync_lock(hdev);
- ret = __hci_req_sync(hdev, req, opt, timeout, hci_status);
+ /* check the state after obtaing the lock to protect the HCI_UP
+ * against any races from hci_dev_do_close when the controller
+ * gets removed.
+ */
+ if (test_bit(HCI_UP, &hdev->flags))
+ ret = __hci_req_sync(hdev, req, opt, timeout, hci_status);
+ else
+ ret = -ENETDOWN;
hci_req_sync_unlock(hdev);
return ret;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 003/677] net/nfc: fix use-after-free llcp_sock_bind/connect
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 001/677] Bluetooth: verify AMP hci_chan before amp_destroy Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 002/677] bluetooth: eliminate the potential race condition when removing the HCI controller Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 004/677] io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers Greg Kroah-Hartman
` (680 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Or Cohen, Nadav Markus, David S. Miller
From: Or Cohen <orcohen@paloaltonetworks.com>
commit c61760e6940dd4039a7f5e84a6afc9cdbf4d82b6 upstream.
Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.
This can be triggered by the following simple program:
int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
addr.sa_family = AF_NFC;
addr.nfc_protocol = NFC_PROTO_NFC_DEP;
bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
close(sock1);
close(sock2);
Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.
This addresses CVE-2021-23134.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reported-by: Nadav Markus <nmarkus@paloaltonetworks.com>
Fixes: c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/nfc/llcp_sock.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -109,12 +109,14 @@ static int llcp_sock_bind(struct socket
GFP_KERNEL);
if (!llcp_sock->service_name) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
ret = -ENOMEM;
goto put_dev;
}
llcp_sock->ssap = nfc_llcp_get_sdp_ssap(local, llcp_sock);
if (llcp_sock->ssap == LLCP_SAP_MAX) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
kfree(llcp_sock->service_name);
llcp_sock->service_name = NULL;
ret = -EADDRINUSE;
@@ -709,6 +711,7 @@ static int llcp_sock_connect(struct sock
llcp_sock->ssap = nfc_llcp_get_local_ssap(local);
if (llcp_sock->ssap == LLCP_SAP_MAX) {
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
ret = -ENOMEM;
goto put_dev;
}
@@ -756,6 +759,7 @@ sock_unlink:
sock_llcp_release:
nfc_llcp_put_ssap(local, llcp_sock->ssap);
nfc_llcp_local_put(llcp_sock->local);
+ llcp_sock->local = NULL;
put_dev:
nfc_put_device(dev);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 004/677] io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 003/677] net/nfc: fix use-after-free llcp_sock_bind/connect Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 005/677] coresight: etm-perf: Fix define build issue when built as module Greg Kroah-Hartman
` (679 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo, Jens Axboe
From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
commit d1f82808877bb10d3deee7cf3374a4eb3fb582db upstream.
Read and write operations are capped to MAX_RW_COUNT. Some read ops rely on
that limit, and that is not guaranteed by the IORING_OP_PROVIDE_BUFFERS.
Truncate those lengths when doing io_add_buffers, so buffer addresses still
use the uncapped length.
Also, take the chance and change struct io_buffer len member to __u32, so
it matches struct io_provide_buffer len member.
This fixes CVE-2021-3491, also reported as ZDI-CAN-13546.
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Reported-by: Billy Jheng Bing-Jhong (@st424204)
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/io_uring.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -238,7 +238,7 @@ struct fixed_rsrc_data {
struct io_buffer {
struct list_head list;
__u64 addr;
- __s32 len;
+ __u32 len;
__u16 bid;
};
@@ -4017,7 +4017,7 @@ static int io_add_buffers(struct io_prov
break;
buf->addr = addr;
- buf->len = pbuf->len;
+ buf->len = min_t(__u32, pbuf->len, MAX_RW_COUNT);
buf->bid = bid;
addr += pbuf->len;
bid++;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 005/677] coresight: etm-perf: Fix define build issue when built as module
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 004/677] io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 006/677] software node: Allow node addition to already existing device Greg Kroah-Hartman
` (678 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leo Yan, Mike Leach, Mathieu Poirier
From: Mike Leach <mike.leach@linaro.org>
commit 9204ff94868496f2d9b8b173af52ec455160c364 upstream.
CONFIG_CORESIGHT_SOURCE_ETM4X is undefined when built as module,
CONFIG_CORESIGHT_SOURCE_ETM4X_MODULE is defined instead.
Therefore code in format_attr_contextid_show() not correctly complied
when coresight built as module.
Use IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) to correct this.
Link: https://lore.kernel.org/r/20210414194808.22872-1-mike.leach@linaro.org
Fixes: 88f11864cf1d ("coresight: etm-perf: Support PID tracing for kernel at EL2")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210415202404.945368-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -52,7 +52,7 @@ static ssize_t format_attr_contextid_sho
{
int pid_fmt = ETM_OPT_CTXTID;
-#if defined(CONFIG_CORESIGHT_SOURCE_ETM4X)
+#if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X)
pid_fmt = is_kernel_in_hyp_mode() ? ETM_OPT_CTXTID2 : ETM_OPT_CTXTID;
#endif
return sprintf(page, "config:%d\n", pid_fmt);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 006/677] software node: Allow node addition to already existing device
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 005/677] coresight: etm-perf: Fix define build issue when built as module Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 007/677] Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL" Greg Kroah-Hartman
` (677 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pierre-Louis Bossart, Heikki Krogerus
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
commit b622b24519f5b008f6d4e20e5675eaffa8fbd87b upstream.
If the node is added to an already exiting device, the node
needs to be also linked to the device separately.
This will make sure the reference count is kept in balance
also when the node is injected to a device afterwards.
Fixes: e68d0119e328 ("software node: Introduce device_add_software_node()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210414075438.64547-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/swnode.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -1032,6 +1032,7 @@ int device_add_software_node(struct devi
}
set_secondary_fwnode(dev, &swnode->fwnode);
+ software_node_notify(dev, KOBJ_ADD);
return 0;
}
@@ -1105,8 +1106,8 @@ int software_node_notify(struct device *
switch (action) {
case KOBJ_ADD:
- ret = sysfs_create_link(&dev->kobj, &swnode->kobj,
- "software_node");
+ ret = sysfs_create_link_nowarn(&dev->kobj, &swnode->kobj,
+ "software_node");
if (ret)
break;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 007/677] Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 006/677] software node: Allow node addition to already existing device Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 008/677] usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode() Greg Kroah-Hartman
` (676 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anthony Mallet, Oliver Neukum, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 729f7955cb987c5b7d7e54c87c5ad71c789934f7 upstream.
This reverts commit b401f8c4f492cbf74f3f59c9141e5be3071071bb.
The offending commit claimed that trying to set the values reported back
by TIOCGSERIAL as a regular user could result in an -EPERM error when HZ
is 250, but that was never the case.
With HZ=250, the default 0.5 second value of close_delay is converted to
125 jiffies when set and is converted back to 50 centiseconds by
TIOCGSERIAL as expected (not 12 cs as was claimed, even if that was the
case before an earlier fix).
Comparing the internal current and new jiffies values is just fine to
determine if the value is about to change so drop the bogus workaround
(which was also backported to stable).
For completeness: With different default values for these parameters or
with a HZ value not divisible by two, the lack of rounding when setting
the default values in tty_port_init() could result in an -EPERM being
returned, but this is hardly something we need to worry about.
Cc: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/class/cdc-acm.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -942,7 +942,6 @@ static int set_serial_info(struct tty_st
{
struct acm *acm = tty->driver_data;
unsigned int closing_wait, close_delay;
- unsigned int old_closing_wait, old_close_delay;
int retval = 0;
close_delay = msecs_to_jiffies(ss->close_delay * 10);
@@ -950,17 +949,11 @@ static int set_serial_info(struct tty_st
ASYNC_CLOSING_WAIT_NONE :
msecs_to_jiffies(ss->closing_wait * 10);
- /* we must redo the rounding here, so that the values match */
- old_close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
- old_closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE :
- jiffies_to_msecs(acm->port.closing_wait) / 10;
-
mutex_lock(&acm->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
- if ((ss->close_delay != old_close_delay) ||
- (ss->closing_wait != old_closing_wait))
+ if ((close_delay != acm->port.close_delay) ||
+ (closing_wait != acm->port.closing_wait))
retval = -EPERM;
else
retval = -EOPNOTSUPP;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 008/677] usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 007/677] Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL" Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 009/677] tty: moxa: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
` (675 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Heikki Krogerus,
Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit 3a2a91a2d51761557843996a66098eb7182b48b4 upstream.
usb_role_switch_find_by_fwnode() returns a reference to the role-switch
which must be put by calling usb_role_switch_put().
usb_role_switch_put() calls module_put(sw->dev.parent->driver->owner),
add a matching try_module_get() to usb_role_switch_find_by_fwnode(),
making it behave the same as the other usb_role_switch functions
which return a reference.
This avoids a WARN_ON being hit at kernel/module.c:1158 due to the
module-refcount going below 0.
Fixes: c6919d5e0cd1 ("usb: roles: Add usb_role_switch_find_by_fwnode()")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210409124136.65591-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/roles/class.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -189,6 +189,8 @@ usb_role_switch_find_by_fwnode(const str
return NULL;
dev = class_find_device_by_fwnode(role_class, fwnode);
+ if (dev)
+ WARN_ON(!try_module_get(dev->parent->driver->owner));
return dev ? to_role_switch(dev) : NULL;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 009/677] tty: moxa: fix TIOCSSERIAL jiffies conversions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 008/677] usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode() Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 010/677] tty: amiserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
` (674 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 6e70b73ca5240c0059a1fbf8ccd4276d6cf71956 upstream.
The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.
Add the missing conversions so that TIOCGSERIAL works as expected also
when HZ is not 100.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-11-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/moxa.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -2040,7 +2040,7 @@ static int moxa_get_serial_info(struct t
ss->line = info->port.tty->index,
ss->flags = info->port.flags,
ss->baud_base = 921600,
- ss->close_delay = info->port.close_delay;
+ ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
mutex_unlock(&info->port.mutex);
return 0;
}
@@ -2069,7 +2069,7 @@ static int moxa_set_serial_info(struct t
return -EPERM;
}
}
- info->port.close_delay = ss->close_delay * HZ / 100;
+ info->port.close_delay = msecs_to_jiffies(ss->close_delay * 10);
MoxaSetFifo(info, ss->type == PORT_16550A);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 010/677] tty: amiserial: fix TIOCSSERIAL permission check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 009/677] tty: moxa: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 011/677] USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
` (673 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 1d31a831cc04f5f942de3e7d91edaa52310d3c99 upstream.
Changing the port closing_wait parameter is a privileged operation.
Add the missing check to TIOCSSERIAL so that -EPERM is returned in case
an unprivileged user tries to change the closing-wait setting.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-9-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/amiserial.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -970,6 +970,7 @@ static int set_serial_info(struct tty_st
if (!serial_isroot()) {
if ((ss->baud_base != state->baud_base) ||
(ss->close_delay != port->close_delay) ||
+ (ss->closing_wait != port->closing_wait) ||
(ss->xmit_fifo_size != state->xmit_fifo_size) ||
((ss->flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 011/677] USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 010/677] tty: amiserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 012/677] staging: greybus: uart: " Greg Kroah-Hartman
` (672 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 3d732690d2267f4d0e19077b178dffbedafdf0c9 upstream.
The port close_delay and closing_wait parameters set by TIOCSSERIAL are
specified in jiffies and not milliseconds.
Add the missing conversions so that the TIOCSSERIAL works as expected
also when HZ is not 1000.
Fixes: 02303f73373a ("usb-wwan: implement TIOCGSERIAL and TIOCSSERIAL to avoid blocking close(2)")
Cc: stable@vger.kernel.org # 2.6.38
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/usb_wwan.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -140,10 +140,10 @@ int usb_wwan_get_serial_info(struct tty_
ss->line = port->minor;
ss->port = port->port_number;
ss->baud_base = tty_get_baud_rate(port->port.tty);
- ss->close_delay = port->port.close_delay / 10;
+ ss->close_delay = jiffies_to_msecs(port->port.close_delay) / 10;
ss->closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- port->port.closing_wait / 10;
+ jiffies_to_msecs(port->port.closing_wait) / 10;
return 0;
}
EXPORT_SYMBOL(usb_wwan_get_serial_info);
@@ -155,9 +155,10 @@ int usb_wwan_set_serial_info(struct tty_
unsigned int closing_wait, close_delay;
int retval = 0;
- close_delay = ss->close_delay * 10;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(ss->closing_wait * 10);
mutex_lock(&port->port.mutex);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 012/677] staging: greybus: uart: fix TIOCSSERIAL jiffies conversions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 011/677] USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 013/677] USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check Greg Kroah-Hartman
` (671 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit b71e571adaa58be4fd289abebc8997e05b4c6b40 upstream.
The port close_delay and closing_wait parameters set by TIOCSSERIAL are
specified in jiffies and not milliseconds.
Add the missing conversions so that TIOCSSERIAL works as expected also
when HZ is not 1000.
Fixes: e68453ed28c5 ("greybus: uart-gb: now builds, more framework added")
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/greybus/uart.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -614,10 +614,12 @@ static int get_serial_info(struct tty_st
ss->line = gb_tty->minor;
ss->xmit_fifo_size = 16;
ss->baud_base = 9600;
- ss->close_delay = gb_tty->port.close_delay / 10;
+ ss->close_delay = jiffies_to_msecs(gb_tty->port.close_delay) / 10;
ss->closing_wait =
gb_tty->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : gb_tty->port.closing_wait / 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ jiffies_to_msecs(gb_tty->port.closing_wait) / 10;
+
return 0;
}
@@ -629,9 +631,10 @@ static int set_serial_info(struct tty_st
unsigned int close_delay;
int retval = 0;
- close_delay = ss->close_delay * 10;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(ss->closing_wait * 10);
mutex_lock(&gb_tty->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 013/677] USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 012/677] staging: greybus: uart: " Greg Kroah-Hartman
@ 2021-05-12 14:40 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 014/677] staging: fwserial: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
` (670 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:40 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit d370c90dcd64e427a79a093a070117a1571d4cd8 upstream.
Changing the port closing-wait parameter is a privileged operation so
make sure to return -EPERM if a regular user tries to change it.
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ti_usb_3410_5052.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1418,14 +1418,19 @@ static int ti_set_serial_info(struct tty
struct serial_struct *ss)
{
struct usb_serial_port *port = tty->driver_data;
- struct ti_port *tport = usb_get_serial_port_data(port);
+ struct tty_port *tport = &port->port;
unsigned cwait;
cwait = ss->closing_wait;
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = msecs_to_jiffies(10 * ss->closing_wait);
- tport->tp_port->port.closing_wait = cwait;
+ if (!capable(CAP_SYS_ADMIN)) {
+ if (cwait != tport->closing_wait)
+ return -EPERM;
+ }
+
+ tport->closing_wait = cwait;
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 014/677] staging: fwserial: fix TIOCSSERIAL jiffies conversions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-05-12 14:40 ` [PATCH 5.12 013/677] USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 015/677] tty: moxa: fix TIOCSSERIAL permission check Greg Kroah-Hartman
` (669 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 7a3791afdbd5a951b09a7689bba856bd9f6c6a9f upstream.
The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.
Add the missing conversions so that TIOCGSERIAL works as expected also
when HZ is not 100.
Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/fwserial/fwserial.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -1223,7 +1223,7 @@ static int get_serial_info(struct tty_st
ss->flags = port->port.flags;
ss->xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN;
ss->baud_base = 400000000;
- ss->close_delay = port->port.close_delay;
+ ss->close_delay = jiffies_to_msecs(port->port.close_delay) / 10;
mutex_unlock(&port->port.mutex);
return 0;
}
@@ -1245,7 +1245,7 @@ static int set_serial_info(struct tty_st
return -EPERM;
}
}
- port->port.close_delay = ss->close_delay * HZ / 100;
+ port->port.close_delay = msecs_to_jiffies(ss->close_delay * 10);
mutex_unlock(&port->port.mutex);
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 015/677] tty: moxa: fix TIOCSSERIAL permission check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 014/677] staging: fwserial: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 016/677] tty: mxser: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
` (668 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit dc8c8437658667be9b11ec25c4b5482ed2becdaa upstream.
Changing the port close delay or type are privileged operations so make
sure to return -EPERM if a regular user tries to change them.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-12-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/moxa.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -2050,6 +2050,7 @@ static int moxa_set_serial_info(struct t
struct serial_struct *ss)
{
struct moxa_port *info = tty->driver_data;
+ unsigned int close_delay;
if (tty->index == MAX_PORTS)
return -EINVAL;
@@ -2061,19 +2062,24 @@ static int moxa_set_serial_info(struct t
ss->baud_base != 921600)
return -EPERM;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
+
mutex_lock(&info->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
- if (((ss->flags & ~ASYNC_USR_MASK) !=
+ if (close_delay != info->port.close_delay ||
+ ss->type != info->type ||
+ ((ss->flags & ~ASYNC_USR_MASK) !=
(info->port.flags & ~ASYNC_USR_MASK))) {
mutex_unlock(&info->port.mutex);
return -EPERM;
}
- }
- info->port.close_delay = msecs_to_jiffies(ss->close_delay * 10);
+ } else {
+ info->port.close_delay = close_delay;
- MoxaSetFifo(info, ss->type == PORT_16550A);
+ MoxaSetFifo(info, ss->type == PORT_16550A);
- info->type = ss->type;
+ info->type = ss->type;
+ }
mutex_unlock(&info->port.mutex);
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 016/677] tty: mxser: fix TIOCSSERIAL jiffies conversions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 015/677] tty: moxa: fix TIOCSSERIAL permission check Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 017/677] staging: fwserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
` (667 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit be6cf583d24dfe87324dd2830d90fc056e0a6648 upstream.
The port close_delay and closing wait parameters set by TIOCSSERIAL are
specified in jiffies, while the values returned by TIOCGSERIAL are
specified in centiseconds.
Add the missing conversions so that TIOCSSERIAL works as expected also
when HZ is not 100.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-14-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/mxser.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1208,19 +1208,26 @@ static int mxser_get_serial_info(struct
{
struct mxser_port *info = tty->driver_data;
struct tty_port *port = &info->port;
+ unsigned int closing_wait, close_delay;
if (tty->index == MXSER_PORTS)
return -ENOTTY;
mutex_lock(&port->mutex);
+
+ close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
+ closing_wait = info->port.closing_wait;
+ if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ closing_wait = jiffies_to_msecs(closing_wait) / 10;
+
ss->type = info->type,
ss->line = tty->index,
ss->port = info->ioaddr,
ss->irq = info->board->irq,
ss->flags = info->port.flags,
ss->baud_base = info->baud_base,
- ss->close_delay = info->port.close_delay,
- ss->closing_wait = info->port.closing_wait,
+ ss->close_delay = close_delay;
+ ss->closing_wait = closing_wait;
ss->custom_divisor = info->custom_divisor,
mutex_unlock(&port->mutex);
return 0;
@@ -1233,7 +1240,7 @@ static int mxser_set_serial_info(struct
struct tty_port *port = &info->port;
speed_t baud;
unsigned long sl_flags;
- unsigned int flags;
+ unsigned int flags, close_delay, closing_wait;
int retval = 0;
if (tty->index == MXSER_PORTS)
@@ -1255,9 +1262,14 @@ static int mxser_set_serial_info(struct
flags = port->flags & ASYNC_SPD_MASK;
+ close_delay = msecs_to_jiffies(ss->close_delay * 10);
+ closing_wait = ss->closing_wait;
+ if (closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ closing_wait = msecs_to_jiffies(closing_wait * 10);
+
if (!capable(CAP_SYS_ADMIN)) {
if ((ss->baud_base != info->baud_base) ||
- (ss->close_delay != info->port.close_delay) ||
+ (close_delay != info->port.close_delay) ||
((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) {
mutex_unlock(&port->mutex);
return -EPERM;
@@ -1271,8 +1283,8 @@ static int mxser_set_serial_info(struct
*/
port->flags = ((port->flags & ~ASYNC_FLAGS) |
(ss->flags & ASYNC_FLAGS));
- port->close_delay = ss->close_delay * HZ / 100;
- port->closing_wait = ss->closing_wait * HZ / 100;
+ port->close_delay = close_delay;
+ port->closing_wait = closing_wait;
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
(ss->baud_base != info->baud_base ||
ss->custom_divisor !=
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 017/677] staging: fwserial: fix TIOCSSERIAL permission check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 016/677] tty: mxser: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 018/677] tty: mxser: " Greg Kroah-Hartman
` (666 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 2104eb283df66a482b60254299acbe3c68c03412 upstream.
Changing the port close-delay parameter is a privileged operation so
make sure to return -EPERM if a regular user tries to change it.
Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/fwserial/fwserial.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -1232,20 +1232,24 @@ static int set_serial_info(struct tty_st
struct serial_struct *ss)
{
struct fwtty_port *port = tty->driver_data;
+ unsigned int cdelay;
if (ss->irq != 0 || ss->port != 0 || ss->custom_divisor != 0 ||
ss->baud_base != 400000000)
return -EPERM;
+ cdelay = msecs_to_jiffies(ss->close_delay * 10);
+
mutex_lock(&port->port.mutex);
if (!capable(CAP_SYS_ADMIN)) {
- if (((ss->flags & ~ASYNC_USR_MASK) !=
+ if (cdelay != port->port.close_delay ||
+ ((ss->flags & ~ASYNC_USR_MASK) !=
(port->port.flags & ~ASYNC_USR_MASK))) {
mutex_unlock(&port->port.mutex);
return -EPERM;
}
}
- port->port.close_delay = msecs_to_jiffies(ss->close_delay * 10);
+ port->port.close_delay = cdelay;
mutex_unlock(&port->port.mutex);
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 018/677] tty: mxser: fix TIOCSSERIAL permission check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 017/677] staging: fwserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 019/677] drm: bridge: fix LONTIUM use of mipi_dsi_() functions Greg Kroah-Hartman
` (665 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit b91cfb2573aeb5ab426fc3c35bcfe9e0d2a7ecbc upstream.
Changing the port type and closing_wait parameter are privileged
operations so make sure to return -EPERM if a regular user tries to
change them.
Note that the closing_wait parameter would not actually have been
changed but the return value did not indicate that.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-15-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/mxser.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1270,6 +1270,7 @@ static int mxser_set_serial_info(struct
if (!capable(CAP_SYS_ADMIN)) {
if ((ss->baud_base != info->baud_base) ||
(close_delay != info->port.close_delay) ||
+ (closing_wait != info->port.closing_wait) ||
((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) {
mutex_unlock(&port->mutex);
return -EPERM;
@@ -1296,11 +1297,11 @@ static int mxser_set_serial_info(struct
baud = ss->baud_base / ss->custom_divisor;
tty_encode_baud_rate(tty, baud, baud);
}
- }
- info->type = ss->type;
+ info->type = ss->type;
- process_txrx_fifo(info);
+ process_txrx_fifo(info);
+ }
if (tty_port_initialized(port)) {
if (flags != (port->flags & ASYNC_SPD_MASK)) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 019/677] drm: bridge: fix LONTIUM use of mipi_dsi_() functions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 018/677] tty: mxser: " Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 020/677] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply Greg Kroah-Hartman
` (664 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Randy Dunlap,
Adren Grassein, Dmitry Baryshkov, Sam Ravnborg, Vinod Koul,
Bjorn Andersson, Srinivas Kandagatla, Andrzej Hajda,
Neil Armstrong, Robert Foss, dri-devel
From: Randy Dunlap <rdunlap@infradead.org>
commit ad085b3a712a89e4a48472121b231add7a8362e4 upstream.
The Lontium DRM bridge drivers use mipi_dsi_() function interfaces so
they need to select DRM_MIPI_DSI to prevent build errors.
ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined!
ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined!
ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined!
ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined!
ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined!
ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined!
ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined!
ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined!
ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined!
ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined!
WARNING: modpost: suppressed 5 unresolved symbol warnings because there were too many)
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge")
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Adren Grassein <adrien.grassein@gmail.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/Kconfig | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -67,6 +67,7 @@ config DRM_LONTIUM_LT9611UXC
depends on OF
select DRM_PANEL_BRIDGE
select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
select REGMAP_I2C
help
Driver for Lontium LT9611UXC DSI to HDMI bridge
@@ -151,6 +152,7 @@ config DRM_SII902X
tristate "Silicon Image sii902x RGB/HDMI bridge"
depends on OF
select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
select REGMAP_I2C
select I2C_MUX
select SND_SOC_HDMI_CODEC if SND_SOC
@@ -200,6 +202,7 @@ config DRM_TOSHIBA_TC358767
tristate "Toshiba TC358767 eDP bridge"
depends on OF
select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
select REGMAP_I2C
select DRM_PANEL
help
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 020/677] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 019/677] drm: bridge: fix LONTIUM use of mipi_dsi_() functions Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 021/677] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply Greg Kroah-Hartman
` (663 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Badhri Jagan Sridharan,
Guenter Roeck, Adam Thomson, Heikki Krogerus
From: Badhri Jagan Sridharan <badhri@google.com>
commit f3dedafb8263ca4791a92a23f5230068f5bde008 upstream.
tcpm_pd_build_request overwrites current_limit and supply_voltage
even before port partner accepts the requests. This leaves stale
values in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values of current limit/supply voltage in req_current_limit
and req_supply_voltage. current_limit/supply_voltage gets updated
once the port partner accepts the request.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tcpm/tcpm.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -389,7 +389,10 @@ struct tcpm_port {
unsigned int operating_snk_mw;
bool update_sink_caps;
- /* Requested current / voltage */
+ /* Requested current / voltage to the port partner */
+ u32 req_current_limit;
+ u32 req_supply_voltage;
+ /* Actual current / voltage limit of the local port */
u32 current_limit;
u32 supply_voltage;
@@ -2432,8 +2435,8 @@ static void tcpm_pd_ctrl_request(struct
case SNK_TRANSITION_SINK:
if (port->vbus_present) {
tcpm_set_current_limit(port,
- port->current_limit,
- port->supply_voltage);
+ port->req_current_limit,
+ port->req_supply_voltage);
port->explicit_contract = true;
tcpm_set_auto_vbus_discharge_threshold(port,
TYPEC_PWR_MODE_PD,
@@ -2542,8 +2545,8 @@ static void tcpm_pd_ctrl_request(struct
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
port->pps_data.active = true;
- port->supply_voltage = port->pps_data.out_volt;
- port->current_limit = port->pps_data.op_curr;
+ port->req_supply_voltage = port->pps_data.out_volt;
+ port->req_current_limit = port->pps_data.op_curr;
tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
break;
case SOFT_RESET_SEND:
@@ -3192,8 +3195,8 @@ static int tcpm_pd_build_request(struct
flags & RDO_CAP_MISMATCH ? " [mismatch]" : "");
}
- port->current_limit = ma;
- port->supply_voltage = mv;
+ port->req_current_limit = ma;
+ port->req_supply_voltage = mv;
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 021/677] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 020/677] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 022/677] usb: typec: tcpm: update power supply once partner accepts Greg Kroah-Hartman
` (662 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Badhri Jagan Sridharan, Adam Thomson,
Heikki Krogerus
From: Badhri Jagan Sridharan <badhri@google.com>
commit e3a0720224873587954b55d193d5b4abb14f0443 upstream.
tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
port->pps_data.max_volt, port->pps_data.max_curr even before
port partner accepts the requests. This leaves incorrect values
in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
req_op_curr. min_volt, max_volt, max_curr gets updated once the
partner accepts the request. current_limit, supply_voltage gets updated
once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
current_limit and supply_voltage is enforced.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tcpm/tcpm.c | 88 +++++++++++++++++++++++++-----------------
1 file changed, 53 insertions(+), 35 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -268,12 +268,27 @@ struct pd_mode_data {
struct typec_altmode_desc altmode_desc[ALTMODE_DISCOVERY_MAX];
};
+/*
+ * @min_volt: Actual min voltage at the local port
+ * @req_min_volt: Requested min voltage to the port partner
+ * @max_volt: Actual max voltage at the local port
+ * @req_max_volt: Requested max voltage to the port partner
+ * @max_curr: Actual max current at the local port
+ * @req_max_curr: Requested max current of the port partner
+ * @req_out_volt: Requested output voltage to the port partner
+ * @req_op_curr: Requested operating current to the port partner
+ * @supported: Parter has atleast one APDO hence supports PPS
+ * @active: PPS mode is active
+ */
struct pd_pps_data {
u32 min_volt;
+ u32 req_min_volt;
u32 max_volt;
+ u32 req_max_volt;
u32 max_curr;
- u32 out_volt;
- u32 op_curr;
+ u32 req_max_curr;
+ u32 req_out_volt;
+ u32 req_op_curr;
bool supported;
bool active;
};
@@ -2495,8 +2510,8 @@ static void tcpm_pd_ctrl_request(struct
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
/* Revert data back from any requested PPS updates */
- port->pps_data.out_volt = port->supply_voltage;
- port->pps_data.op_curr = port->current_limit;
+ port->pps_data.req_out_volt = port->supply_voltage;
+ port->pps_data.req_op_curr = port->current_limit;
port->pps_status = (type == PD_CTRL_WAIT ?
-EAGAIN : -EOPNOTSUPP);
@@ -2545,8 +2560,11 @@ static void tcpm_pd_ctrl_request(struct
break;
case SNK_NEGOTIATE_PPS_CAPABILITIES:
port->pps_data.active = true;
- port->req_supply_voltage = port->pps_data.out_volt;
- port->req_current_limit = port->pps_data.op_curr;
+ port->pps_data.min_volt = port->pps_data.req_min_volt;
+ port->pps_data.max_volt = port->pps_data.req_max_volt;
+ port->pps_data.max_curr = port->pps_data.req_max_curr;
+ port->req_supply_voltage = port->pps_data.req_out_volt;
+ port->req_current_limit = port->pps_data.req_op_curr;
tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
break;
case SOFT_RESET_SEND:
@@ -3105,16 +3123,16 @@ static unsigned int tcpm_pd_select_pps_a
src = port->source_caps[src_pdo];
snk = port->snk_pdo[snk_pdo];
- port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src),
- pdo_pps_apdo_min_voltage(snk));
- port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src),
- pdo_pps_apdo_max_voltage(snk));
- port->pps_data.max_curr = min_pps_apdo_current(src, snk);
- port->pps_data.out_volt = min(port->pps_data.max_volt,
- max(port->pps_data.min_volt,
- port->pps_data.out_volt));
- port->pps_data.op_curr = min(port->pps_data.max_curr,
- port->pps_data.op_curr);
+ port->pps_data.req_min_volt = max(pdo_pps_apdo_min_voltage(src),
+ pdo_pps_apdo_min_voltage(snk));
+ port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src),
+ pdo_pps_apdo_max_voltage(snk));
+ port->pps_data.req_max_curr = min_pps_apdo_current(src, snk);
+ port->pps_data.req_out_volt = min(port->pps_data.max_volt,
+ max(port->pps_data.min_volt,
+ port->pps_data.req_out_volt));
+ port->pps_data.req_op_curr = min(port->pps_data.max_curr,
+ port->pps_data.req_op_curr);
power_supply_changed(port->psy);
}
@@ -3242,10 +3260,10 @@ static int tcpm_pd_build_pps_request(str
tcpm_log(port, "Invalid APDO selected!");
return -EINVAL;
}
- max_mv = port->pps_data.max_volt;
- max_ma = port->pps_data.max_curr;
- out_mv = port->pps_data.out_volt;
- op_ma = port->pps_data.op_curr;
+ max_mv = port->pps_data.req_max_volt;
+ max_ma = port->pps_data.req_max_curr;
+ out_mv = port->pps_data.req_out_volt;
+ op_ma = port->pps_data.req_op_curr;
break;
default:
tcpm_log(port, "Invalid PDO selected!");
@@ -3292,8 +3310,8 @@ static int tcpm_pd_build_pps_request(str
tcpm_log(port, "Requesting APDO %d: %u mV, %u mA",
src_pdo_index, out_mv, op_ma);
- port->pps_data.op_curr = op_ma;
- port->pps_data.out_volt = out_mv;
+ port->pps_data.req_op_curr = op_ma;
+ port->pps_data.req_out_volt = out_mv;
return 0;
}
@@ -5377,7 +5395,7 @@ static int tcpm_try_role(struct typec_po
return ret;
}
-static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
+static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr)
{
unsigned int target_mw;
int ret;
@@ -5395,12 +5413,12 @@ static int tcpm_pps_set_op_curr(struct t
goto port_unlock;
}
- if (op_curr > port->pps_data.max_curr) {
+ if (req_op_curr > port->pps_data.max_curr) {
ret = -EINVAL;
goto port_unlock;
}
- target_mw = (op_curr * port->pps_data.out_volt) / 1000;
+ target_mw = (req_op_curr * port->supply_voltage) / 1000;
if (target_mw < port->operating_snk_mw) {
ret = -EINVAL;
goto port_unlock;
@@ -5414,10 +5432,10 @@ static int tcpm_pps_set_op_curr(struct t
}
/* Round down operating current to align with PPS valid steps */
- op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP);
+ req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP);
reinit_completion(&port->pps_complete);
- port->pps_data.op_curr = op_curr;
+ port->pps_data.req_op_curr = req_op_curr;
port->pps_status = 0;
port->pps_pending = true;
mutex_unlock(&port->lock);
@@ -5438,7 +5456,7 @@ swap_unlock:
return ret;
}
-static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
+static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt)
{
unsigned int target_mw;
int ret;
@@ -5456,13 +5474,13 @@ static int tcpm_pps_set_out_volt(struct
goto port_unlock;
}
- if (out_volt < port->pps_data.min_volt ||
- out_volt > port->pps_data.max_volt) {
+ if (req_out_volt < port->pps_data.min_volt ||
+ req_out_volt > port->pps_data.max_volt) {
ret = -EINVAL;
goto port_unlock;
}
- target_mw = (port->pps_data.op_curr * out_volt) / 1000;
+ target_mw = (port->current_limit * req_out_volt) / 1000;
if (target_mw < port->operating_snk_mw) {
ret = -EINVAL;
goto port_unlock;
@@ -5476,10 +5494,10 @@ static int tcpm_pps_set_out_volt(struct
}
/* Round down output voltage to align with PPS valid steps */
- out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP);
+ req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP);
reinit_completion(&port->pps_complete);
- port->pps_data.out_volt = out_volt;
+ port->pps_data.req_out_volt = req_out_volt;
port->pps_status = 0;
port->pps_pending = true;
mutex_unlock(&port->lock);
@@ -5537,8 +5555,8 @@ static int tcpm_pps_activate(struct tcpm
/* Trigger PPS request or move back to standard PDO contract */
if (activate) {
- port->pps_data.out_volt = port->supply_voltage;
- port->pps_data.op_curr = port->current_limit;
+ port->pps_data.req_out_volt = port->supply_voltage;
+ port->pps_data.req_op_curr = port->current_limit;
}
mutex_unlock(&port->lock);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 022/677] usb: typec: tcpm: update power supply once partner accepts
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 021/677] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 023/677] USB: serial: xr: fix CSIZE handling Greg Kroah-Hartman
` (661 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Badhri Jagan Sridharan, Adam Thomson,
Heikki Krogerus
From: Badhri Jagan Sridharan <badhri@google.com>
commit 4050f2683f2c3151dc3dd1501ac88c57caf810ff upstream.
power_supply_changed needs to be called to notify clients
after the partner accepts the requested values for the pps
case.
Also, remove the redundant power_supply_changed at the end
of the tcpm_reset_port as power_supply_changed is already
called right after usb_type is changed.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210407200723.1914388-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tcpm/tcpm.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2565,6 +2565,7 @@ static void tcpm_pd_ctrl_request(struct
port->pps_data.max_curr = port->pps_data.req_max_curr;
port->req_supply_voltage = port->pps_data.req_out_volt;
port->req_current_limit = port->pps_data.req_op_curr;
+ power_supply_changed(port->psy);
tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
break;
case SOFT_RESET_SEND:
@@ -3133,7 +3134,6 @@ static unsigned int tcpm_pd_select_pps_a
port->pps_data.req_out_volt));
port->pps_data.req_op_curr = min(port->pps_data.max_curr,
port->pps_data.req_op_curr);
- power_supply_changed(port->psy);
}
return src_pdo;
@@ -3554,8 +3554,6 @@ static void tcpm_reset_port(struct tcpm_
port->sink_cap_done = false;
if (port->tcpc->enable_frs)
port->tcpc->enable_frs(port->tcpc, false);
-
- power_supply_changed(port->psy);
}
static void tcpm_detach(struct tcpm_port *port)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 023/677] USB: serial: xr: fix CSIZE handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 022/677] usb: typec: tcpm: update power supply once partner accepts Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 024/677] usb: xhci-mtk: remove or operator for setting schedule parameters Greg Kroah-Hartman
` (660 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manivannan Sadhasivam, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit ea7ada4de2f7406150dd35ecd0302842587a464e upstream.
The XR21V141X does not have a 5- or 6-bit mode, but the current
implementation failed to properly restore the old setting when CS5 or
CS6 was requested. Instead an invalid request would be sent to the
device.
Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/xr_serial.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/serial/xr_serial.c
+++ b/drivers/usb/serial/xr_serial.c
@@ -468,6 +468,11 @@ static void xr_set_termios(struct tty_st
if (old_termios)
termios->c_cflag |= old_termios->c_cflag & CSIZE;
else
+ termios->c_cflag |= CS8;
+
+ if (C_CSIZE(tty) == CS7)
+ bits |= XR21V141X_UART_DATA_7;
+ else
bits |= XR21V141X_UART_DATA_8;
break;
case CS7:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 024/677] usb: xhci-mtk: remove or operator for setting schedule parameters
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 023/677] USB: serial: xr: fix CSIZE handling Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 025/677] usb: xhci-mtk: improve bandwidth scheduling with TT Greg Kroah-Hartman
` (659 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chunfeng Yun
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
commit 5fa5827566e3affa1657ccf9b22706c06a5d021a upstream.
Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.
Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-mtk-sch.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -643,7 +643,7 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd
*/
if (usb_endpoint_xfer_int(&ep->desc)
|| usb_endpoint_xfer_isoc(&ep->desc))
- ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1));
+ ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(1));
return 0;
}
@@ -730,10 +730,10 @@ int xhci_mtk_check_bandwidth(struct usb_
list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
- ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts)
+ ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts)
| EP_BCSCOUNT(sch_ep->cs_count)
| EP_BBM(sch_ep->burst_mode));
- ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset)
+ ep_ctx->reserved[1] = cpu_to_le32(EP_BOFFSET(sch_ep->offset)
| EP_BREPEAT(sch_ep->repeat));
xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 025/677] usb: xhci-mtk: improve bandwidth scheduling with TT
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 024/677] usb: xhci-mtk: remove or operator for setting schedule parameters Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 026/677] ASoC: samsung: tm2_wm5110: check of of_parse return value Greg Kroah-Hartman
` (658 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yaqii Wu, Chunfeng Yun
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
commit e19ee44a3d07c232f9241024dab1ebd0748cdf5f upstream.
When the USB headset is plug into an external hub, sometimes
can't set config due to not enough bandwidth, so need improve
LS/FS INT/ISOC bandwidth scheduling with TT.
Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yaqii Wu <yaqii.wu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/2f30e81400a59afef5f8231c98149169c7520519.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-mtk-sch.c | 74 ++++++++++++++++++++++++++++++++--------
drivers/usb/host/xhci-mtk.h | 6 ++-
2 files changed, 64 insertions(+), 16 deletions(-)
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -378,6 +378,31 @@ static void update_bus_bw(struct mu3h_sc
sch_ep->allocated = used;
}
+static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
+{
+ struct mu3h_sch_tt *tt = sch_ep->sch_tt;
+ u32 num_esit, tmp;
+ int base;
+ int i, j;
+
+ num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
+ for (i = 0; i < num_esit; i++) {
+ base = offset + i * sch_ep->esit;
+
+ /*
+ * Compared with hs bus, no matter what ep type,
+ * the hub will always delay one uframe to send data
+ */
+ for (j = 0; j < sch_ep->cs_count; j++) {
+ tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe;
+ if (tmp > FS_PAYLOAD_MAX)
+ return -ERANGE;
+ }
+ }
+
+ return 0;
+}
+
static int check_sch_tt(struct usb_device *udev,
struct mu3h_sch_ep_info *sch_ep, u32 offset)
{
@@ -402,7 +427,7 @@ static int check_sch_tt(struct usb_devic
return -ERANGE;
for (i = 0; i < sch_ep->cs_count; i++)
- if (test_bit(offset + i, tt->split_bit_map))
+ if (test_bit(offset + i, tt->ss_bit_map))
return -ERANGE;
} else {
@@ -432,7 +457,7 @@ static int check_sch_tt(struct usb_devic
cs_count = 7; /* HW limit */
for (i = 0; i < cs_count + 2; i++) {
- if (test_bit(offset + i, tt->split_bit_map))
+ if (test_bit(offset + i, tt->ss_bit_map))
return -ERANGE;
}
@@ -448,24 +473,44 @@ static int check_sch_tt(struct usb_devic
sch_ep->num_budget_microframes = sch_ep->esit;
}
- return 0;
+ return check_fs_bus_bw(sch_ep, offset);
}
static void update_sch_tt(struct usb_device *udev,
- struct mu3h_sch_ep_info *sch_ep)
+ struct mu3h_sch_ep_info *sch_ep, bool used)
{
struct mu3h_sch_tt *tt = sch_ep->sch_tt;
u32 base, num_esit;
+ int bw_updated;
+ int bits;
int i, j;
num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
+ bits = (sch_ep->ep_type == ISOC_OUT_EP) ? sch_ep->cs_count : 1;
+
+ if (used)
+ bw_updated = sch_ep->bw_cost_per_microframe;
+ else
+ bw_updated = -sch_ep->bw_cost_per_microframe;
+
for (i = 0; i < num_esit; i++) {
base = sch_ep->offset + i * sch_ep->esit;
- for (j = 0; j < sch_ep->num_budget_microframes; j++)
- set_bit(base + j, tt->split_bit_map);
+
+ for (j = 0; j < bits; j++) {
+ if (used)
+ set_bit(base + j, tt->ss_bit_map);
+ else
+ clear_bit(base + j, tt->ss_bit_map);
+ }
+
+ for (j = 0; j < sch_ep->cs_count; j++)
+ tt->fs_bus_bw[base + j] += bw_updated;
}
- list_add_tail(&sch_ep->tt_endpoint, &tt->ep_list);
+ if (used)
+ list_add_tail(&sch_ep->tt_endpoint, &tt->ep_list);
+ else
+ list_del(&sch_ep->tt_endpoint);
}
static int check_sch_bw(struct usb_device *udev,
@@ -535,7 +580,7 @@ static int check_sch_bw(struct usb_devic
if (!tt_offset_ok)
return -ERANGE;
- update_sch_tt(udev, sch_ep);
+ update_sch_tt(udev, sch_ep, 1);
}
/* update bus bandwidth info */
@@ -548,15 +593,16 @@ static void destroy_sch_ep(struct usb_de
struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
{
/* only release ep bw check passed by check_sch_bw() */
- if (sch_ep->allocated)
+ if (sch_ep->allocated) {
update_bus_bw(sch_bw, sch_ep, 0);
+ if (sch_ep->sch_tt)
+ update_sch_tt(udev, sch_ep, 0);
+ }
- list_del(&sch_ep->endpoint);
-
- if (sch_ep->sch_tt) {
- list_del(&sch_ep->tt_endpoint);
+ if (sch_ep->sch_tt)
drop_tt(udev);
- }
+
+ list_del(&sch_ep->endpoint);
kfree(sch_ep);
}
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -20,13 +20,15 @@
#define XHCI_MTK_MAX_ESIT 64
/**
- * @split_bit_map: used to avoid split microframes overlay
+ * @ss_bit_map: used to avoid start split microframes overlay
+ * @fs_bus_bw: array to keep track of bandwidth already used for FS
* @ep_list: Endpoints using this TT
* @usb_tt: usb TT related
* @tt_port: TT port number
*/
struct mu3h_sch_tt {
- DECLARE_BITMAP(split_bit_map, XHCI_MTK_MAX_ESIT);
+ DECLARE_BITMAP(ss_bit_map, XHCI_MTK_MAX_ESIT);
+ u32 fs_bus_bw[XHCI_MTK_MAX_ESIT];
struct list_head ep_list;
struct usb_tt *usb_tt;
int tt_port;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 026/677] ASoC: samsung: tm2_wm5110: check of of_parse return value
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 025/677] usb: xhci-mtk: improve bandwidth scheduling with TT Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 027/677] ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function Greg Kroah-Hartman
` (657 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski,
Krzysztof Kozlowski, Sylwester Nawrocki, Pierre-Louis Bossart,
Mark Brown
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
commit d58970da324732686529655c21791cef0ee547c4 upstream.
cppcheck warning:
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef51a ("ASoC: samsung: Add support for HDMI audio on TM2 board")
Cc: <stable@vger.kernel.org>
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/samsung/tm2_wm5110.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/samsung/tm2_wm5110.c
+++ b/sound/soc/samsung/tm2_wm5110.c
@@ -553,7 +553,7 @@ static int tm2_probe(struct platform_dev
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
cells_name, i, &args);
- if (!args.np) {
+ if (ret) {
dev_err(dev, "i2s-controller property parse error: %d\n", i);
ret = -EINVAL;
goto dai_node_put;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 027/677] ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 026/677] ASoC: samsung: tm2_wm5110: check of of_parse return value Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 028/677] ASoC: tlv320aic32x4: Register clocks before registering component Greg Kroah-Hartman
` (656 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukasz Majczak, Pierre-Louis Bossart,
Mark Brown
From: Lukasz Majczak <lma@semihalf.com>
commit a523ef731ac6674dc07574f31bf44cc5bfa14e4d upstream.
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.
The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.
This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.
Tested for all use cases of the driver.
Based on similar fix in kbl_rt5663_rt5514_max98927.c
from Harsha Priya <harshapriya.n@intel.com> and
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Lukasz Majczak <lma@semihalf.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415124347.475432-1-lma@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/intel/boards/kbl_da7219_max98927.c | 38 +++++++++++++++++++++------
1 file changed, 30 insertions(+), 8 deletions(-)
--- a/sound/soc/intel/boards/kbl_da7219_max98927.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98927.c
@@ -282,12 +282,34 @@ static int kabylake_ssp_fixup(struct snd
struct snd_interval *chan = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
- struct snd_soc_dpcm *dpcm = container_of(
- params, struct snd_soc_dpcm, hw_params);
- struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link;
- struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link;
+ struct snd_soc_dpcm *dpcm, *rtd_dpcm = NULL;
/*
+ * The following loop will be called only for playback stream
+ * In this platform, there is only one playback device on every SSP
+ */
+ for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_PLAYBACK, dpcm) {
+ rtd_dpcm = dpcm;
+ break;
+ }
+
+ /*
+ * This following loop will be called only for capture stream
+ * In this platform, there is only one capture device on every SSP
+ */
+ for_each_dpcm_fe(rtd, SNDRV_PCM_STREAM_CAPTURE, dpcm) {
+ rtd_dpcm = dpcm;
+ break;
+ }
+
+ if (!rtd_dpcm)
+ return -EINVAL;
+
+ /*
+ * The above 2 loops are mutually exclusive based on the stream direction,
+ * thus rtd_dpcm variable will never be overwritten
+ */
+ /*
* Topology for kblda7219m98373 & kblmax98373 supports only S24_LE,
* where as kblda7219m98927 & kblmax98927 supports S16_LE by default.
* Skipping the port wise FE and BE configuration for kblda7219m98373 &
@@ -309,9 +331,9 @@ static int kabylake_ssp_fixup(struct snd
/*
* The ADSP will convert the FE rate to 48k, stereo, 24 bit
*/
- if (!strcmp(fe_dai_link->name, "Kbl Audio Port") ||
- !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") ||
- !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) {
+ if (!strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Port") ||
+ !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Headset Playback") ||
+ !strcmp(rtd_dpcm->fe->dai_link->name, "Kbl Audio Capture Port")) {
rate->min = rate->max = 48000;
chan->min = chan->max = 2;
snd_mask_none(fmt);
@@ -322,7 +344,7 @@ static int kabylake_ssp_fixup(struct snd
* The speaker on the SSP0 supports S16_LE and not S24_LE.
* thus changing the mask here
*/
- if (!strcmp(be_dai_link->name, "SSP0-Codec"))
+ if (!strcmp(rtd_dpcm->be->dai_link->name, "SSP0-Codec"))
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE);
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 028/677] ASoC: tlv320aic32x4: Register clocks before registering component
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 027/677] ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 029/677] ASoC: tlv320aic32x4: Increase maximum register in regmap Greg Kroah-Hartman
` (655 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Annaliese McDermond, Mark Brown
From: Annaliese McDermond <nh6z@nh6z.net>
commit 1ca1156cfd69530e6b7cb99943baf90c8bd871a5 upstream.
Clock registration must be performed before the component is
registered. aic32x4_component_probe attempts to get all the
clocks right off the bat. If the component is registered before
the clocks there is a race condition where the clocks may not
be registered by the time aic32x4_componet_probe actually runs.
Fixes: d1c859d314d8 ("ASoC: codec: tlv3204: Increased maximum supported channels")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/0101017889850206-dcac4cce-8cc8-4a21-80e9-4e4bef44b981-000000@us-west-2.amazonses.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/tlv320aic32x4.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -1243,6 +1243,10 @@ int aic32x4_probe(struct device *dev, st
if (ret)
goto err_disable_regulators;
+ ret = aic32x4_register_clocks(dev, aic32x4->mclk_name);
+ if (ret)
+ goto err_disable_regulators;
+
ret = devm_snd_soc_register_component(dev,
&soc_component_dev_aic32x4, &aic32x4_dai, 1);
if (ret) {
@@ -1250,10 +1254,6 @@ int aic32x4_probe(struct device *dev, st
goto err_disable_regulators;
}
- ret = aic32x4_register_clocks(dev, aic32x4->mclk_name);
- if (ret)
- goto err_disable_regulators;
-
return 0;
err_disable_regulators:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 029/677] ASoC: tlv320aic32x4: Increase maximum register in regmap
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 028/677] ASoC: tlv320aic32x4: Register clocks before registering component Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 030/677] MIPS: pci-mt7620: fix PLL lock check Greg Kroah-Hartman
` (654 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Annaliese McDermond, Mark Brown
From: Annaliese McDermond <nh6z@nh6z.net>
commit 29654ed8384e9dbaf4cfba689dbcb664a6ab4bb7 upstream.
AIC32X4_REFPOWERUP was added as a register, but the maximum register value
in the regmap and regmap range was not correspondingly increased. This
caused an error when this register was attempted to be written.
Fixes: ec96690de82c ("ASoC: tlv320aic32x4: Enable fast charge")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/0101017889851cab-ce60cfdb-d88c-43d8-bbd2-7fbf34a0c912-000000@us-west-2.amazonses.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/codecs/tlv320aic32x4.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -577,12 +577,12 @@ static const struct regmap_range_cfg aic
.window_start = 0,
.window_len = 128,
.range_min = 0,
- .range_max = AIC32X4_RMICPGAVOL,
+ .range_max = AIC32X4_REFPOWERUP,
},
};
const struct regmap_config aic32x4_regmap_config = {
- .max_register = AIC32X4_RMICPGAVOL,
+ .max_register = AIC32X4_REFPOWERUP,
.ranges = aic32x4_regmap_pages,
.num_ranges = ARRAY_SIZE(aic32x4_regmap_pages),
};
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 030/677] MIPS: pci-mt7620: fix PLL lock check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 029/677] ASoC: tlv320aic32x4: Increase maximum register in regmap Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 031/677] MIPS: pci-rt2880: fix slot 0 configuration Greg Kroah-Hartman
` (653 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Lipnitskiy, John Crispin,
linux-mips, linux-mediatek, Thomas Bogendoerfer
From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
commit c15b99ae2ba9ea30da3c7cd4765b8a4707e530a6 upstream.
Upstream a long-standing OpenWrt patch [0] that fixes MT7620 PCIe PLL
lock check. The existing code checks the wrong register bit: PPLL_SW_SET
is not defined in PPLL_CFG1 and bit 31 of PPLL_CFG1 is marked as reserved
in the MT7620 Programming Guide. The correct bit to check for PLL lock
is PPLL_LD (bit 23).
Also reword the error message for clarity.
Without this change it is unlikely that this driver ever worked with
mainline kernel.
[0]: https://lists.infradead.org/pipermail/lede-commits/2017-July/004441.html
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/pci/pci-mt7620.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -30,6 +30,7 @@
#define RALINK_GPIOMODE 0x60
#define PPLL_CFG1 0x9c
+#define PPLL_LD BIT(23)
#define PPLL_DRV 0xa0
#define PDRV_SW_SET BIT(31)
@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla
rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
mdelay(100);
- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
- dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
+ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
+ dev_err(&pdev->dev, "pcie PLL not locked, aborting init\n");
reset_control_assert(rstpcie0);
rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
return -1;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 031/677] MIPS: pci-rt2880: fix slot 0 configuration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 030/677] MIPS: pci-mt7620: fix PLL lock check Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 032/677] FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR Greg Kroah-Hartman
` (652 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Lipnitskiy, Lorenzo Pieralisi,
Tobias Wolf, Thomas Bogendoerfer
From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
commit 8e98b697006d749d745d3b174168a877bb96c500 upstream.
pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which
for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed,
only slots/funcs with devices attached would be called. While arguably
the right thing, that left no chance for this driver to ever initialize
slot 0, effectively bricking PCI and USB on RT2880 devices such as the
Belkin F5D8235-4 v1.
Slot 0 configuration needs to happen after PCI bus enumeration, but
before any device at slot 0x11 (func 0 or 1) is talked to. That was
determined empirically by testing on a Belkin F5D8235-4 v1 device. A
minimal BAR 0 config write followed by read, then setting slot 0
PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for
proper functionality.
Tested by ensuring that full- and high-speed USB devices get enumerated
on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt).
Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tobias Wolf <dev-NTEO@vplace.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/pci/pci-rt2880.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -180,7 +180,6 @@ static inline void rt2880_pci_write_u32(
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- u16 cmd;
int irq = -1;
if (dev->bus->number != 0)
@@ -188,8 +187,6 @@ int pcibios_map_irq(const struct pci_dev
switch (PCI_SLOT(dev->devfn)) {
case 0x00:
- rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
- (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
break;
case 0x11:
irq = RT288X_CPU_IRQ_PCI;
@@ -201,16 +198,6 @@ int pcibios_map_irq(const struct pci_dev
break;
}
- pci_write_config_byte((struct pci_dev *) dev,
- PCI_CACHE_LINE_SIZE, 0x14);
- pci_write_config_byte((struct pci_dev *) dev, PCI_LATENCY_TIMER, 0xFF);
- pci_read_config_word((struct pci_dev *) dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
- PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
- pci_write_config_word((struct pci_dev *) dev, PCI_COMMAND, cmd);
- pci_write_config_byte((struct pci_dev *) dev, PCI_INTERRUPT_LINE,
- dev->irq);
return irq;
}
@@ -251,6 +238,30 @@ static int rt288x_pci_probe(struct platf
int pcibios_plat_dev_init(struct pci_dev *dev)
{
+ static bool slot0_init;
+
+ /*
+ * Nobody seems to initialize slot 0, but this platform requires it, so
+ * do it once when some other slot is being enabled. The PCI subsystem
+ * should configure other slots properly, so no need to do anything
+ * special for those.
+ */
+ if (!slot0_init && dev->bus->number == 0) {
+ u16 cmd;
+ u32 bar0;
+
+ slot0_init = true;
+
+ pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
+ 0x08000000);
+ pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
+ &bar0);
+
+ pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd);
+ }
+
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 032/677] FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 031/677] MIPS: pci-rt2880: fix slot 0 configuration Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 033/677] PCI: Allow VPD access for QLogic ISP2722 Greg Kroah-Hartman
` (651 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, David S. Miller
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit f626ca682912fab55dff15469ce893ae16b65c7e upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
For those systems the PCI BARs that request a mapping in the I/O space
have the length recorded in the corresponding PCI resource set to zero,
which makes it unassigned:
# lspci -s 0031:02:04.0 -v
0031:02:04.0 FDDI network controller: Digital Equipment Corporation PCI-to-PDQ Interface Chip [PFI] FDDI (DEFPA) (rev 02)
Subsystem: Digital Equipment Corporation FDDIcontroller/PCI (DEFPA)
Flags: bus master, medium devsel, latency 136, IRQ 57, NUMA node 8
Memory at 620c080020000 (32-bit, non-prefetchable) [size=128]
I/O ports at <unassigned> [disabled]
Memory at 620c080030000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: defxx
Kernel modules: defxx
#
Regardless the driver goes ahead and requests it (here observed with a
Raptor Talos II POWER9 system), resulting in an odd /proc/ioport entry:
# cat /proc/ioports
00000000-ffffffffffffffff : 0031:02:04.0
#
Furthermore, the system gets confused as the driver actually continues
and pokes at those locations, causing a flood of messages being output
to the system console by the underlying system firmware, like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
defxx 0031:02:04.0: enabling device (0140 -> 0142)
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010000
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
and so on and so on (possibly intermixed actually, as there's no locking
between the kernel and the firmware in console port access with this
particular system, but cleaned up above for clarity), and once some 10k
of such pairs of the latter two messages have been produced an interace
eventually shows up in a useless state:
0031:02:04.0: DEFPA at I/O addr = 0x0, IRQ = 57, Hardware addr = 00-00-00-00-00-00
This was not expected to happen as resource handling was added to the
driver a while ago, because it was not known at that time that a PCI
system would be possible that cannot assign port I/O resources, and
oddly enough `request_region' does not fail, which would have caught it.
Correct the problem then by checking for the length of zero for the CSR
resource and bail out gracefully refusing to register an interface if
that turns out to be the case, producing messages like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
0031:02:04.0: Cannot use I/O, no address set, aborting
0031:02:04.0: Recompile driver with "CONFIG_DEFXX_MMIO=y"
Keep the original check for the EISA MMIO resource as implemented,
because in that case the length is hardwired to 0x400 as a consequence
of how the compare/mask address decoding works in the ESIC chip and it
is only the base address that is set to zero if MMIO has been disabled
for the adapter in EISA configuration, which in turn could be a valid
bus address in a legacy-free system implementing PCI, especially for
port I/O.
Where the EISA MMIO resource has been disabled for the adapter in EISA
configuration this arrangement keeps producing messages like:
eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
00:05: Cannot use MMIO, no address set, aborting
00:05: Recompile driver with "CONFIG_DEFXX_MMIO=n"
00:05: Or run ECU and set adapter's MMIO location
with the last two lines now swapped for easier handling in the driver.
There is no need to check for and catch the case of a port I/O resource
not having been assigned for EISA as the adapter uses the slot-specific
I/O space, which gets assigned by how EISA has been specified and maps
directly to the particular slot an option card has been placed in. And
the EISA variant of the adapter has additional registers that are only
accessible via the port I/O space anyway.
While at it factor out the error message calls into helpers and fix an
argument order bug with the `pr_err' call now in `dfx_register_res_err'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4d0438e56a8f ("defxx: Clean up DEFEA resource management")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/fddi/defxx.c | 47 ++++++++++++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 17 deletions(-)
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -495,6 +495,25 @@ static const struct net_device_ops dfx_n
.ndo_set_mac_address = dfx_ctl_set_mac_address,
};
+static void dfx_register_res_alloc_err(const char *print_name, bool mmio,
+ bool eisa)
+{
+ pr_err("%s: Cannot use %s, no address set, aborting\n",
+ print_name, mmio ? "MMIO" : "I/O");
+ pr_err("%s: Recompile driver with \"CONFIG_DEFXX_MMIO=%c\"\n",
+ print_name, mmio ? 'n' : 'y');
+ if (eisa && mmio)
+ pr_err("%s: Or run ECU and set adapter's MMIO location\n",
+ print_name);
+}
+
+static void dfx_register_res_err(const char *print_name, bool mmio,
+ unsigned long start, unsigned long len)
+{
+ pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, aborting\n",
+ print_name, mmio ? "MMIO" : "I/O", len, start);
+}
+
/*
* ================
* = dfx_register =
@@ -568,15 +587,12 @@ static int dfx_register(struct device *b
dev_set_drvdata(bdev, dev);
dfx_get_bars(bdev, bar_start, bar_len);
- if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {
- pr_err("%s: Cannot use MMIO, no address set, aborting\n",
- print_name);
- pr_err("%s: Run ECU and set adapter's MMIO location\n",
- print_name);
- pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""
- "\n", print_name);
+ if (bar_len[0] == 0 ||
+ (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0)) {
+ dfx_register_res_alloc_err(print_name, dfx_use_mmio,
+ dfx_bus_eisa);
err = -ENXIO;
- goto err_out;
+ goto err_out_disable;
}
if (dfx_use_mmio)
@@ -585,18 +601,16 @@ static int dfx_register(struct device *b
else
region = request_region(bar_start[0], bar_len[0], print_name);
if (!region) {
- pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "
- "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,
- (long)bar_len[0], (long)bar_start[0]);
+ dfx_register_res_err(print_name, dfx_use_mmio,
+ bar_start[0], bar_len[0]);
err = -EBUSY;
goto err_out_disable;
}
if (bar_start[1] != 0) {
region = request_region(bar_start[1], bar_len[1], print_name);
if (!region) {
- pr_err("%s: Cannot reserve I/O resource "
- "0x%lx @ 0x%lx, aborting\n", print_name,
- (long)bar_len[1], (long)bar_start[1]);
+ dfx_register_res_err(print_name, 0,
+ bar_start[1], bar_len[1]);
err = -EBUSY;
goto err_out_csr_region;
}
@@ -604,9 +618,8 @@ static int dfx_register(struct device *b
if (bar_start[2] != 0) {
region = request_region(bar_start[2], bar_len[2], print_name);
if (!region) {
- pr_err("%s: Cannot reserve I/O resource "
- "0x%lx @ 0x%lx, aborting\n", print_name,
- (long)bar_len[2], (long)bar_start[2]);
+ dfx_register_res_err(print_name, 0,
+ bar_start[2], bar_len[2]);
err = -EBUSY;
goto err_out_bh_region;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 033/677] PCI: Allow VPD access for QLogic ISP2722
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 032/677] FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 034/677] KVM: x86: Defer the MMU unload to the normal path on an global INVPCID Greg Kroah-Hartman
` (650 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Arun Easi, Bjorn Helgaas
From: Arun Easi <aeasi@marvell.com>
commit e00dc69b5f17c444a38cd9745a0f76bc989b3af4 upstream.
0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") disabled access
to VPD of the ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter because
reading past the end of the VPD caused NMIs.
104daa71b396 ("PCI: Determine actual VPD size on first access") limits
reads to the actual size of VPD, which should prevent these NMIs.
104daa71b396 was merged *before* 0d5370d1d852, but we think the testing
that prompted 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722")
was done with a kernel that lacked 104daa71b396. See [1, 2].
Remove the quirk added by 0d5370d1d852 ("PCI: Prevent VPD access for QLogic
ISP2722") so customers can read the HBA VPD.
[1] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2012161641230.28924@irv1user01.caveonetworks.com/
[2] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2104071535110.13940@irv1user01.caveonetworks.com/
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210409215153.16569-2-aeasi@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/vpd.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -570,7 +570,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LS
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
/*
* The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
* device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 034/677] KVM: x86: Defer the MMU unload to the normal path on an global INVPCID
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 033/677] PCI: Allow VPD access for QLogic ISP2722 Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 035/677] PCI: xgene: Fix cfg resource mapping Greg Kroah-Hartman
` (649 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit f66c53b3b94f658590e1012bf6d922f8b7e01bda upstream.
Defer unloading the MMU after a INVPCID until the instruction emulation
has completed, i.e. until after RIP has been updated.
On VMX, this is a benign bug as VMX doesn't touch the MMU when skipping
an emulated instruction. However, on SVM, if nrip is disabled, the
emulator is used to skip an instruction, which would lead to fireworks
if the emulator were invoked without a valid MMU.
Fixes: eb4b248e152d ("kvm: vmx: Support INVPCID in shadow paging mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/x86.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -11539,7 +11539,7 @@ int kvm_handle_invpcid(struct kvm_vcpu *
fallthrough;
case INVPCID_TYPE_ALL_INCL_GLOBAL:
- kvm_mmu_unload(vcpu);
+ kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu);
return kvm_skip_emulated_instruction(vcpu);
default:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 035/677] PCI: xgene: Fix cfg resource mapping
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 034/677] KVM: x86: Defer the MMU unload to the normal path on an global INVPCID Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 036/677] PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c Greg Kroah-Hartman
` (648 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, dann.frazier, Dejin Zheng, Lorenzo Pieralisi
From: Dejin Zheng <zhengdejin5@gmail.com>
commit d4707d79fae08c8996a1ba45965a491045a22dda upstream.
In commit e2dcd20b1645 a change was made to use
devm_platform_ioremap_resource_byname() to simplify code and remove
the res variable; this was wrong since the res variable is still needed
and as an outcome the port->cfg_addr gets an erroneous address.
Revert the change going back to original behaviour.
Link: https://lore.kernel.org/r/20210328144118.305074-1-zhengdejin5@gmail.com
Fixes: e2dcd20b1645a ("PCI: controller: Convert to devm_platform_ioremap_resource_byname()")
Reported-by: dann.frazier@canonical.com
Tested-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-xgene.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -354,7 +354,8 @@ static int xgene_pcie_map_reg(struct xge
if (IS_ERR(port->csr_base))
return PTR_ERR(port->csr_base);
- port->cfg_base = devm_platform_ioremap_resource_byname(pdev, "cfg");
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ port->cfg_base = devm_ioremap_resource(dev, res);
if (IS_ERR(port->cfg_base))
return PTR_ERR(port->cfg_base);
port->cfg_addr = res->start;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 036/677] PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 035/677] PCI: xgene: Fix cfg resource mapping Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 037/677] PM / devfreq: Unlock mutex and free devfreq struct in error path Greg Kroah-Hartman
` (647 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kishon Vijay Abraham I,
Lorenzo Pieralisi, Krzysztof Wilczyński
From: Kishon Vijay Abraham I <kishon@ti.com>
commit 3d0b2a3a87ce5ae85de46c4241afd52ab8b566fe upstream.
Both TI's AM65x (K3) and TI's K2 PCIe driver are implemented in
pci-keystone. However Only K2 PCIe driver should use it's own pci_ops
for configuration space accesses. But commit 10a797c6e54a
("PCI: dwc: keystone: Use pci_ops for config space accessors") used
custom pci_ops for both AM65x and K2. This breaks configuration space
access for AM65x platform. Fix it here.
Link: https://lore.kernel.org/r/20210317131518.11040-1-kishon@ti.com
Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/dwc/pci-keystone.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -798,7 +798,8 @@ static int __init ks_pcie_host_init(stru
int ret;
pp->bridge->ops = &ks_pcie_ops;
- pp->bridge->child_ops = &ks_child_pcie_ops;
+ if (!ks_pcie->is_am6)
+ pp->bridge->child_ops = &ks_child_pcie_ops;
ret = ks_pcie_config_legacy_irq(ks_pcie);
if (ret)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 037/677] PM / devfreq: Unlock mutex and free devfreq struct in error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 036/677] PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 038/677] soc/tegra: regulators: Fix locking up when voltage-spread is out of range Greg Kroah-Hartman
` (646 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lukasz Luba, Chanwoo Choi
From: Lukasz Luba <lukasz.luba@arm.com>
commit 8b50a7995770d41a2e8d9c422cd2882aca0dedd2 upstream.
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.
Change the goto destination which frees the allocated memory.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/devfreq/devfreq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -821,7 +821,8 @@ struct devfreq *devfreq_add_device(struc
if (devfreq->profile->timer < 0
|| devfreq->profile->timer >= DEVFREQ_TIMER_NUM) {
- goto err_out;
+ mutex_unlock(&devfreq->lock);
+ goto err_dev;
}
if (!devfreq->profile->max_state && !devfreq->profile->freq_table) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 038/677] soc/tegra: regulators: Fix locking up when voltage-spread is out of range
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 037/677] PM / devfreq: Unlock mutex and free devfreq struct in error path Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 039/677] iio: inv_mpu6050: Fully validate gyro and accel scale writes Greg Kroah-Hartman
` (645 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Geis, Dmitry Osipenko,
Thierry Reding, Matt Merhar
From: Dmitry Osipenko <digetx@gmail.com>
commit ef85bb582c41524e9e68dfdbde48e519dac4ab3d upstream.
Fix voltage coupler lockup which happens when voltage-spread is out
of range due to a bug in the code. The max-spread requirement shall be
accounted when CPU regulator doesn't have consumers. This problem is
observed on Tegra30 Ouya game console once system-wide DVFS is enabled
in a device-tree.
Fixes: 783807436f36 ("soc/tegra: regulators: Add regulators coupler for Tegra30")
Cc: stable@vger.kernel.org
Reported-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/soc/tegra/regulators-tegra30.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soc/tegra/regulators-tegra30.c
+++ b/drivers/soc/tegra/regulators-tegra30.c
@@ -178,7 +178,7 @@ static int tegra30_voltage_update(struct
* survive the voltage drop if it's running on a higher frequency.
*/
if (!cpu_min_uV_consumers)
- cpu_min_uV = cpu_uV;
+ cpu_min_uV = max(cpu_uV, cpu_min_uV);
/*
* Bootloader shall set up voltages correctly, but if it
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 039/677] iio: inv_mpu6050: Fully validate gyro and accel scale writes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 038/677] soc/tegra: regulators: Fix locking up when voltage-spread is out of range Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 040/677] iio: magnetometer: yas530: Include right header Greg Kroah-Hartman
` (644 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen,
Jean-Baptiste Maneyrol, Stable, Jonathan Cameron
From: Lars-Peter Clausen <lars@metafoo.de>
commit e09fe9135399807b8397798a53160e055dc6c29f upstream.
When setting the gyro or accelerometer scale the inv_mpu6050 driver ignores
the integer part of the value. As a result e.g. all of 0.13309, 1.13309,
12345.13309, ... are accepted as a valid gyro scale and 0.13309 is the
scale that gets set in all those cases.
Make sure to check that the integer part of the scale value is 0 and reject
it otherwise.
Fixes: 09a642b78523 ("Invensense MPU6050 Device Driver.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210405114441.24167-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -731,12 +731,16 @@ inv_mpu6050_read_raw(struct iio_dev *ind
}
}
-static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val)
+static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val,
+ int val2)
{
int result, i;
+ if (val != 0)
+ return -EINVAL;
+
for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) {
- if (gyro_scale_6050[i] == val) {
+ if (gyro_scale_6050[i] == val2) {
result = inv_mpu6050_set_gyro_fsr(st, i);
if (result)
return result;
@@ -767,13 +771,17 @@ static int inv_write_raw_get_fmt(struct
return -EINVAL;
}
-static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
+static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val,
+ int val2)
{
int result, i;
u8 d;
+ if (val != 0)
+ return -EINVAL;
+
for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) {
- if (accel_scale[i] == val) {
+ if (accel_scale[i] == val2) {
d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
result = regmap_write(st->map, st->reg->accl_config, d);
if (result)
@@ -814,10 +822,10 @@ static int inv_mpu6050_write_raw(struct
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ANGL_VEL:
- result = inv_mpu6050_write_gyro_scale(st, val2);
+ result = inv_mpu6050_write_gyro_scale(st, val, val2);
break;
case IIO_ACCEL:
- result = inv_mpu6050_write_accel_scale(st, val2);
+ result = inv_mpu6050_write_accel_scale(st, val, val2);
break;
default:
result = -EINVAL;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 040/677] iio: magnetometer: yas530: Include right header
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 039/677] iio: inv_mpu6050: Fully validate gyro and accel scale writes Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 041/677] iio: sx9310: Fix write_.._debounce() Greg Kroah-Hartman
` (643 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Harvey Harrison,
Linus Walleij, Stable, Jonathan Cameron
From: Linus Walleij <linus.walleij@linaro.org>
commit bb354aeb364f9dee51e16edfdf6194ce4ba9237e upstream.
To get access to the big endian byte order parsing helpers
drivers need to include <asm/unaligned.h> and nothing else.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210215153032.47962-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/magnetometer/yamaha-yas530.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -32,13 +32,14 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/random.h>
-#include <linux/unaligned/be_byteshift.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
+#include <asm/unaligned.h>
+
/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */
#define YAS5XX_DEVICE_ID 0x80
#define YAS5XX_ACTUATE_INIT_COIL 0x81
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 041/677] iio: sx9310: Fix write_.._debounce()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 040/677] iio: magnetometer: yas530: Include right header Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 042/677] iio:accel:adis16201: Fix wrong axis assignment that prevents loading Greg Kroah-Hartman
` (642 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gwendal Grignou, Stephen Boyd,
Jonathan Cameron
From: Gwendal Grignou <gwendal@chromium.org>
commit fc948409ccc1e8afe8655cee77c686eedbfbee60 upstream.
Check input to be sure it matches Semtech sx9310 specification and
can fit into debounce register.
Compare argument writen to thresh_.._period with read from same
sysfs attribute:
Before: Afer:
write | read write | read
-1 | 8 -1 fails: -EINVAL
0 | 8 0 | 0
1 | 0 1 | 0
2..15 | 2^log2(N) 2..15 | 2^log2(N)
16 | 0 >= 16 fails: -EINVAL
Fixes: 1b6872015f0b ("iio: sx9310: Support setting debounce values")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210331182222.219533-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/proximity/sx9310.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -763,7 +763,11 @@ static int sx9310_write_far_debounce(str
int ret;
unsigned int regval;
- val = ilog2(val);
+ if (val > 0)
+ val = ilog2(val);
+ if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val))
+ return -EINVAL;
+
regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val);
mutex_lock(&data->mutex);
@@ -780,7 +784,11 @@ static int sx9310_write_close_debounce(s
int ret;
unsigned int regval;
- val = ilog2(val);
+ if (val > 0)
+ val = ilog2(val);
+ if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val))
+ return -EINVAL;
+
regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val);
mutex_lock(&data->mutex);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 042/677] iio:accel:adis16201: Fix wrong axis assignment that prevents loading
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 041/677] iio: sx9310: Fix write_.._debounce() Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 043/677] iio:adc:ad7476: Fix remove handling Greg Kroah-Hartman
` (641 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Cameron, Stable,
Himanshu Jha, Nuno Sá,
Alexandru Ardelean
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
commit 4e102429f3dc62dce546f6107e34a4284634196d upstream.
Whilst running some basic tests as part of writing up the dt-bindings for
this driver (to follow), it became clear it doesn't actually load
currently.
iio iio:device1: tried to double register : in_incli_x_index
adis16201 spi0.0: Failed to create buffer sysfs interfaces
adis16201: probe of spi0.0 failed with error -16
Looks like a cut and paste / update bug. Fixes tag obviously not accurate
but we don't want to bother carry thing back to before the driver moved
out of staging.
Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/adis16201.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/accel/adis16201.c
+++ b/drivers/iio/accel/adis16201.c
@@ -215,7 +215,7 @@ static const struct iio_chan_spec adis16
ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
+ ADIS_INCLI_CHAN(Y, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(7)
};
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 043/677] iio:adc:ad7476: Fix remove handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 042/677] iio:accel:adis16201: Fix wrong axis assignment that prevents loading Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 044/677] iio: magnetometer: yas530: Fix return value on error path Greg Kroah-Hartman
` (640 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Cameron, Michael Hennerich,
Alexandru Ardelean, Stable
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
commit 6baee4bd63f5fdf1716f88e95c21a683e94fe30d upstream.
This driver was in an odd half way state between devm based cleanup
and manual cleanup (most of which was missing).
I would guess something went wrong with a rebase or similar.
Anyhow, this basically finishes the job as a precursor to improving
the regulator handling.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 4bb2b8f94ace3 ("iio: adc: ad7476: implement devm_add_action_or_reset")
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171759.318140-2-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7476.c | 18 ++++--------------
1 file changed, 4 insertions(+), 14 deletions(-)
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -321,25 +321,15 @@ static int ad7476_probe(struct spi_devic
spi_message_init(&st->msg);
spi_message_add_tail(&st->xfer, &st->msg);
- ret = iio_triggered_buffer_setup(indio_dev, NULL,
- &ad7476_trigger_handler, NULL);
+ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+ &ad7476_trigger_handler, NULL);
if (ret)
- goto error_disable_reg;
+ return ret;
if (st->chip_info->reset)
st->chip_info->reset(st);
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_ring_unregister;
- return 0;
-
-error_ring_unregister:
- iio_triggered_buffer_cleanup(indio_dev);
-error_disable_reg:
- regulator_disable(st->reg);
-
- return ret;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad7476_id[] = {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 044/677] iio: magnetometer: yas530: Fix return value on error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 043/677] iio:adc:ad7476: Fix remove handling Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 045/677] iio: sx9310: Fix access to variable DT array Greg Kroah-Hartman
` (639 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Andy Shevchenko, Linus Walleij, Stable, Jonathan Cameron
From: Linus Walleij <linus.walleij@linaro.org>
commit e64837bf9e2c063d6b5bab51c0554a60270f636d upstream.
There was a missed return variable assignment in the
default errorpath of the switch statement in yas5xx_probe().
Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210215153023.47899-1-linus.walleij@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/magnetometer/yamaha-yas530.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -888,6 +888,7 @@ static int yas5xx_probe(struct i2c_clien
strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name));
break;
default:
+ ret = -ENODEV;
dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid);
goto assert_reset;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 045/677] iio: sx9310: Fix access to variable DT array
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 044/677] iio: magnetometer: yas530: Fix return value on error path Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 046/677] iio: hid-sensor-rotation: Fix quaternion data not correct Greg Kroah-Hartman
` (638 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gwendal Grignou, Andy Shevchenko,
Jonathan Cameron
From: Gwendal Grignou <gwendal@chromium.org>
commit 6f0078ae704d94b1a93e5f3d0a44cf3d8090fa91 upstream.
With the current code, we want to read 4 entries from DT array
"semtech,combined-sensors". If there are less, we silently fail as
of_property_read_u32_array() returns -EOVERFLOW.
First count the number of entries and if between 1 and 4, collect the
content of the array.
Fixes: 5b19ca2c78a0 ("iio: sx9310: Set various settings from DT")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210326184603.251683-2-gwendal@chromium.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/proximity/sx9310.c | 40 ++++++++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 12 deletions(-)
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -1221,17 +1221,17 @@ static int sx9310_init_compensation(stru
}
static const struct sx9310_reg_default *
-sx9310_get_default_reg(struct sx9310_data *data, int i,
+sx9310_get_default_reg(struct sx9310_data *data, int idx,
struct sx9310_reg_default *reg_def)
{
- int ret;
const struct device_node *np = data->client->dev.of_node;
- u32 combined[SX9310_NUM_CHANNELS] = { 4, 4, 4, 4 };
+ u32 combined[SX9310_NUM_CHANNELS];
+ u32 start = 0, raw = 0, pos = 0;
unsigned long comb_mask = 0;
+ int ret, i, count;
const char *res;
- u32 start = 0, raw = 0, pos = 0;
- memcpy(reg_def, &sx9310_default_regs[i], sizeof(*reg_def));
+ memcpy(reg_def, &sx9310_default_regs[idx], sizeof(*reg_def));
if (!np)
return reg_def;
@@ -1242,15 +1242,31 @@ sx9310_get_default_reg(struct sx9310_dat
reg_def->def |= SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND;
}
- reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK;
- of_property_read_u32_array(np, "semtech,combined-sensors",
- combined, ARRAY_SIZE(combined));
- for (i = 0; i < ARRAY_SIZE(combined); i++) {
- if (combined[i] <= SX9310_NUM_CHANNELS)
- comb_mask |= BIT(combined[i]);
+ count = of_property_count_elems_of_size(np, "semtech,combined-sensors",
+ sizeof(u32));
+ if (count > 0 && count <= ARRAY_SIZE(combined)) {
+ ret = of_property_read_u32_array(np, "semtech,combined-sensors",
+ combined, count);
+ if (ret)
+ break;
+ } else {
+ /*
+ * Either the property does not exist in the DT or the
+ * number of entries is incorrect.
+ */
+ break;
}
+ for (i = 0; i < count; i++) {
+ if (combined[i] >= SX9310_NUM_CHANNELS) {
+ /* Invalid sensor (invalid DT). */
+ break;
+ }
+ comb_mask |= BIT(combined[i]);
+ }
+ if (i < count)
+ break;
- comb_mask &= 0xf;
+ reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK;
if (comb_mask == (BIT(3) | BIT(2) | BIT(1) | BIT(0)))
reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3;
else if (comb_mask == (BIT(1) | BIT(2)))
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 046/677] iio: hid-sensor-rotation: Fix quaternion data not correct
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 045/677] iio: sx9310: Fix access to variable DT array Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 047/677] sc16is7xx: Defer probe if device read fails Greg Kroah-Hartman
` (637 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ye Xiang, Stable, Jonathan Cameron
From: Ye Xiang <xiang.ye@intel.com>
commit 6c3b615379d7cd90d2f70b3cf9860c5a4910546a upstream.
Because the data of HID_USAGE_SENSOR_ORIENT_QUATERNION defined by ISH FW
is s16, but quaternion data type is in_rot_quaternion_type(le:s16/32X4>>0),
need to transform data type from s16 to s32
May require manual backporting.
Fixes: fc18dddc0625 ("iio: hid-sensors: Added device rotation support")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210130102546.31397-1-xiang.ye@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/orientation/hid-sensor-rotation.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/iio/orientation/hid-sensor-rotation.c
+++ b/drivers/iio/orientation/hid-sensor-rotation.c
@@ -21,7 +21,7 @@ struct dev_rot_state {
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info quaternion;
struct {
- u32 sampled_vals[4] __aligned(16);
+ s32 sampled_vals[4] __aligned(16);
u64 timestamp __aligned(8);
} scan;
int scale_pre_decml;
@@ -170,8 +170,15 @@ static int dev_rot_capture_sample(struct
struct dev_rot_state *rot_state = iio_priv(indio_dev);
if (usage_id == HID_USAGE_SENSOR_ORIENT_QUATERNION) {
- memcpy(&rot_state->scan.sampled_vals, raw_data,
- sizeof(rot_state->scan.sampled_vals));
+ if (raw_len / 4 == sizeof(s16)) {
+ rot_state->scan.sampled_vals[0] = ((s16 *)raw_data)[0];
+ rot_state->scan.sampled_vals[1] = ((s16 *)raw_data)[1];
+ rot_state->scan.sampled_vals[2] = ((s16 *)raw_data)[2];
+ rot_state->scan.sampled_vals[3] = ((s16 *)raw_data)[3];
+ } else {
+ memcpy(&rot_state->scan.sampled_vals, raw_data,
+ sizeof(rot_state->scan.sampled_vals));
+ }
dev_dbg(&indio_dev->dev, "Recd Quat len:%zu::%zu\n", raw_len,
sizeof(rot_state->scan.sampled_vals));
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 047/677] sc16is7xx: Defer probe if device read fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 046/677] iio: hid-sensor-rotation: Fix quaternion data not correct Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 048/677] phy: cadence: Sierra: Fix PHY power_on sequence Greg Kroah-Hartman
` (636 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Annaliese McDermond
From: Annaliese McDermond <nh6z@nh6z.net>
commit 158e800e0fde91014812f5cdfb92ce812e3a33b4 upstream.
A test was added to the probe function to ensure the device was
actually connected and working before successfully completing a
probe. If the device was actually there, but the I2C bus was not
ready yet for whatever reason, the probe fails permanently.
Change the probe so that we defer the probe on a regmap read
failure so that we try the probe again when the dependent drivers
are potentially loaded. This should not affect the case where the
device truly isn't present because the probe will never successfully
complete.
Fixes: 2aa916e67db3 ("sc16is7xx: Read the LSR register for basic device presence check")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/010101787f9c3fd8-c1815c00-2d6b-4c85-a96a-a13e68597fda-000000@us-west-2.amazonses.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/sc16is7xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1196,7 +1196,7 @@ static int sc16is7xx_probe(struct device
ret = regmap_read(regmap,
SC16IS7XX_LSR_REG << SC16IS7XX_REG_SHIFT, &val);
if (ret < 0)
- return ret;
+ return -EPROBE_DEFER;
/* Alloc port structure */
s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 048/677] phy: cadence: Sierra: Fix PHY power_on sequence
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 047/677] sc16is7xx: Defer probe if device read fails Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 049/677] misc: lis3lv02d: Fix false-positive WARN on various HP models Greg Kroah-Hartman
` (635 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kishon Vijay Abraham I,
Philipp Zabel, Vinod Koul
From: Kishon Vijay Abraham I <kishon@ti.com>
commit 5b4f5757f83be34d1428a1ffbb68d4a1966e9aae upstream.
Commit 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
de-asserts PHY_RESET even before the configurations are loaded in
phy_init(). However PHY_RESET should be de-asserted only after
all the configurations has been initialized, instead of de-asserting
in probe. Fix it here.
Fixes: 44d30d622821d ("phy: cadence: Add driver for Sierra PHY")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210319124128.13308-2-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/phy/cadence/phy-cadence-sierra.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -319,6 +319,12 @@ static int cdns_sierra_phy_on(struct phy
u32 val;
int ret;
+ ret = reset_control_deassert(sp->phy_rst);
+ if (ret) {
+ dev_err(dev, "Failed to take the PHY out of reset\n");
+ return ret;
+ }
+
/* Take the PHY lane group out of reset */
ret = reset_control_deassert(ins->lnk_rst);
if (ret) {
@@ -616,7 +622,6 @@ static int cdns_sierra_phy_probe(struct
pm_runtime_enable(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- reset_control_deassert(sp->phy_rst);
return PTR_ERR_OR_ZERO(phy_provider);
put_child:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 049/677] misc: lis3lv02d: Fix false-positive WARN on various HP models
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 048/677] phy: cadence: Sierra: Fix PHY power_on sequence Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 050/677] phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create() Greg Kroah-Hartman
` (634 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit 3641762c1c9c7cfd84a7061a0a73054f09b412e3 upstream.
Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.
The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.
The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:
int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.
Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.
Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.
Fixes: 1510dd5954be ("lis3lv02d: avoid divide by zero due to unchecked")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=785814
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1817027
BugLink: https://bugs.centos.org/view.php?id=10720
Link: https://lore.kernel.org/r/20210217102501.31758-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/lis3lv02d/lis3lv02d.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -208,7 +208,7 @@ static int lis3_3dc_rates[16] = {0, 1, 1
static int lis3_3dlh_rates[4] = {50, 100, 400, 1000};
/* ODR is Output Data Rate */
-static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
+static int lis3lv02d_get_odr_index(struct lis3lv02d *lis3)
{
u8 ctrl;
int shift;
@@ -216,15 +216,23 @@ static int lis3lv02d_get_odr(struct lis3
lis3->read(lis3, CTRL_REG1, &ctrl);
ctrl &= lis3->odr_mask;
shift = ffs(lis3->odr_mask) - 1;
- return lis3->odrs[(ctrl >> shift)];
+ return (ctrl >> shift);
}
static int lis3lv02d_get_pwron_wait(struct lis3lv02d *lis3)
{
- int div = lis3lv02d_get_odr(lis3);
+ int odr_idx = lis3lv02d_get_odr_index(lis3);
+ int div = lis3->odrs[odr_idx];
- if (WARN_ONCE(div == 0, "device returned spurious data"))
+ if (div == 0) {
+ if (odr_idx == 0) {
+ /* Power-down mode, not sampling no need to sleep */
+ return 0;
+ }
+
+ dev_err(&lis3->pdev->dev, "Error unknown odrs-index: %d\n", odr_idx);
return -ENXIO;
+ }
/* LIS3 power on delay is quite long */
msleep(lis3->pwron_delay / div);
@@ -816,9 +824,12 @@ static ssize_t lis3lv02d_rate_show(struc
struct device_attribute *attr, char *buf)
{
struct lis3lv02d *lis3 = dev_get_drvdata(dev);
+ int odr_idx;
lis3lv02d_sysfs_poweron(lis3);
- return sprintf(buf, "%d\n", lis3lv02d_get_odr(lis3));
+
+ odr_idx = lis3lv02d_get_odr_index(lis3);
+ return sprintf(buf, "%d\n", lis3->odrs[odr_idx]);
}
static ssize_t lis3lv02d_rate_set(struct device *dev,
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 050/677] phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 049/677] misc: lis3lv02d: Fix false-positive WARN on various HP models Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 051/677] misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct Greg Kroah-Hartman
` (633 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kishon Vijay Abraham I,
Swapnil Jakhade, Vinod Koul
From: Kishon Vijay Abraham I <kishon@ti.com>
commit f7eb147d306ad2efae6837e20d2944f03be42eb4 upstream.
Invoke wiz_init() before configuring anything else in Sierra/Torrent
(invoked as part of of_platform_device_create()). wiz_init() resets the
SERDES device and any configuration done in the probe() of
Sierra/Torrent will be lost. In order to prevent SERDES configuration
from getting reset, invoke wiz_init() immediately before invoking
of_platform_device_create().
Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Cc: <stable@vger.kernel.org> # v5.10
Link: https://lore.kernel.org/r/20210319124128.13308-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/phy/ti/phy-j721e-wiz.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -947,27 +947,24 @@ static int wiz_probe(struct platform_dev
goto err_get_sync;
}
+ ret = wiz_init(wiz);
+ if (ret) {
+ dev_err(dev, "WIZ initialization failed\n");
+ goto err_wiz_init;
+ }
+
serdes_pdev = of_platform_device_create(child_node, NULL, dev);
if (!serdes_pdev) {
dev_WARN(dev, "Unable to create SERDES platform device\n");
ret = -ENOMEM;
- goto err_pdev_create;
- }
- wiz->serdes_pdev = serdes_pdev;
-
- ret = wiz_init(wiz);
- if (ret) {
- dev_err(dev, "WIZ initialization failed\n");
goto err_wiz_init;
}
+ wiz->serdes_pdev = serdes_pdev;
of_node_put(child_node);
return 0;
err_wiz_init:
- of_platform_device_destroy(&serdes_pdev->dev, NULL);
-
-err_pdev_create:
wiz_clock_cleanup(wiz, node);
err_get_sync:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 051/677] misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 050/677] phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create() Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 052/677] misc: vmw_vmci: explicitly initialize vmci_datagram payload Greg Kroah-Hartman
` (632 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tetsuo Handa
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
commit 376565b9717c30cd58ad33860fa42697615fa2e4 upstream.
KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x484/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_send_datagram+0x150/0x280
vmci_dbell_register_notification_bitmap+0x133/0x1e0
vmci_guest_probe_device+0xcab/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
vmci_dbell_register_notification_bitmap+0x50/0x1e0
vmci_dbell_register_notification_bitmap+0x50/0x1e0
Bytes 28-31 of 32 are uninitialized
Memory access of size 32 starts at ffff88810098f570
=====================================================
Fixes: 83e2ec765be03e8a ("VMCI: doorbell implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/vmw_vmci/vmci_doorbell.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/vmw_vmci/vmci_doorbell.c
+++ b/drivers/misc/vmw_vmci/vmci_doorbell.c
@@ -326,7 +326,7 @@ int vmci_dbell_host_context_notify(u32 s
bool vmci_dbell_register_notification_bitmap(u64 bitmap_ppn)
{
int result;
- struct vmci_notify_bm_set_msg bitmap_set_msg;
+ struct vmci_notify_bm_set_msg bitmap_set_msg = { };
bitmap_set_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
VMCI_SET_NOTIFY_BITMAP);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 052/677] misc: vmw_vmci: explicitly initialize vmci_datagram payload
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 051/677] misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 053/677] selinux: add proper NULL termination to the secclass_map permissions Greg Kroah-Hartman
` (631 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tetsuo Handa
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
commit b2192cfeba8481224da0a4ec3b4a7ccd80b1623b upstream.
KMSAN complains that vmci_check_host_caps() left the payload part of
check_msg uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x202/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_guest_probe_device+0xf0b/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Uninit was created at:
kmsan_internal_poison_shadow+0x5c/0xf0
kmsan_slab_alloc+0x8d/0xe0
kmem_cache_alloc+0x84f/0xe30
vmci_guest_probe_device+0xd11/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Bytes 28-31 of 36 are uninitialized
Memory access of size 36 starts at ffff8881675e5f00
=====================================================
Fixes: 1f166439917b69d3 ("VMCI: guest side driver implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/vmw_vmci/vmci_guest.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -168,7 +168,7 @@ static int vmci_check_host_caps(struct p
VMCI_UTIL_NUM_RESOURCES * sizeof(u32);
struct vmci_datagram *check_msg;
- check_msg = kmalloc(msg_size, GFP_KERNEL);
+ check_msg = kzalloc(msg_size, GFP_KERNEL);
if (!check_msg) {
dev_err(&pdev->dev, "%s: Insufficient memory\n", __func__);
return -ENOMEM;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 053/677] selinux: add proper NULL termination to the secclass_map permissions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 052/677] misc: vmw_vmci: explicitly initialize vmci_datagram payload Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 054/677] x86, sched: Treat Intel SNC topology as default, COD as exception Greg Kroah-Hartman
` (630 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Moore
From: Paul Moore <paul@paul-moore.com>
commit e4c82eafb609c2badc56f4e11bc50fcf44b8e9eb upstream.
This patch adds the missing NULL termination to the "bpf" and
"perf_event" object class permission lists.
This missing NULL termination should really only affect the tools
under scripts/selinux, with the most important being genheaders.c,
although in practice this has not been an issue on any of my dev/test
systems. If the problem were to manifest itself it would likely
result in bogus permissions added to the end of the object class;
thankfully with no access control checks using these bogus
permissions and no policies defining these permissions the impact
would likely be limited to some noise about undefined permissions
during policy load.
Cc: stable@vger.kernel.org
Fixes: ec27c3568a34 ("selinux: bpf: Add selinux check for eBPF syscall operations")
Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
security/selinux/include/classmap.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/security/selinux/include/classmap.h
+++ b/security/selinux/include/classmap.h
@@ -242,11 +242,12 @@ struct security_class_mapping secclass_m
{ "infiniband_endport",
{ "manage_subnet", NULL } },
{ "bpf",
- {"map_create", "map_read", "map_write", "prog_load", "prog_run"} },
+ { "map_create", "map_read", "map_write", "prog_load", "prog_run",
+ NULL } },
{ "xdp_socket",
{ COMMON_SOCK_PERMS, NULL } },
{ "perf_event",
- {"open", "cpu", "kernel", "tracepoint", "read", "write"} },
+ { "open", "cpu", "kernel", "tracepoint", "read", "write", NULL } },
{ "lockdown",
{ "integrity", "confidentiality", NULL } },
{ "anon_inode",
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 054/677] x86, sched: Treat Intel SNC topology as default, COD as exception
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 053/677] selinux: add proper NULL termination to the secclass_map permissions Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 055/677] async_xor: increase src_offs when dropping destination page Greg Kroah-Hartman
` (629 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra (Intel),
Alison Schofield, Dave Hansen
From: Alison Schofield <alison.schofield@intel.com>
commit 2c88d45edbb89029c1190bb3b136d2602f057c98 upstream.
Commit 1340ccfa9a9a ("x86,sched: Allow topologies where NUMA nodes
share an LLC") added a vendor and model specific check to never
call topology_sane() for Intel Skylake Server systems where NUMA
nodes share an LLC.
Intel Ice Lake and Sapphire Rapids CPUs also enumerate an LLC that is
shared by multiple NUMA nodes. The LLC on these CPUs is shared for
off-package data access but private to the NUMA node for on-package
access. Rather than managing a list of allowable SNC topologies, make
this SNC topology the default, and treat Intel's Cluster-On-Die (COD)
topology as the exception.
In SNC mode, Sky Lake, Ice Lake, and Sapphire Rapids servers do not
emit this warning:
sched: CPU #3's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210310190233.31752-1-alison.schofield@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/smpboot.c | 90 +++++++++++++++++++++++-----------------------
1 file changed, 46 insertions(+), 44 deletions(-)
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -458,29 +458,52 @@ static bool match_smt(struct cpuinfo_x86
return false;
}
+static bool match_die(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
+{
+ if (c->phys_proc_id == o->phys_proc_id &&
+ c->cpu_die_id == o->cpu_die_id)
+ return true;
+ return false;
+}
+
/*
- * Define snc_cpu[] for SNC (Sub-NUMA Cluster) CPUs.
+ * Unlike the other levels, we do not enforce keeping a
+ * multicore group inside a NUMA node. If this happens, we will
+ * discard the MC level of the topology later.
+ */
+static bool match_pkg(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
+{
+ if (c->phys_proc_id == o->phys_proc_id)
+ return true;
+ return false;
+}
+
+/*
+ * Define intel_cod_cpu[] for Intel COD (Cluster-on-Die) CPUs.
*
- * These are Intel CPUs that enumerate an LLC that is shared by
- * multiple NUMA nodes. The LLC on these systems is shared for
- * off-package data access but private to the NUMA node (half
- * of the package) for on-package access.
+ * Any Intel CPU that has multiple nodes per package and does not
+ * match intel_cod_cpu[] has the SNC (Sub-NUMA Cluster) topology.
*
- * CPUID (the source of the information about the LLC) can only
- * enumerate the cache as being shared *or* unshared, but not
- * this particular configuration. The CPU in this case enumerates
- * the cache to be shared across the entire package (spanning both
- * NUMA nodes).
+ * When in SNC mode, these CPUs enumerate an LLC that is shared
+ * by multiple NUMA nodes. The LLC is shared for off-package data
+ * access but private to the NUMA node (half of the package) for
+ * on-package access. CPUID (the source of the information about
+ * the LLC) can only enumerate the cache as shared or unshared,
+ * but not this particular configuration.
*/
-static const struct x86_cpu_id snc_cpu[] = {
- X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, NULL),
+static const struct x86_cpu_id intel_cod_cpu[] = {
+ X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
+ X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
+ X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
+ const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
+ bool intel_snc = id && id->driver_data;
/* Do not match if we do not have a valid APICID for cpu: */
if (per_cpu(cpu_llc_id, cpu1) == BAD_APICID)
@@ -495,32 +518,12 @@ static bool match_llc(struct cpuinfo_x86
* means 'c' does not share the LLC of 'o'. This will be
* reflected to userspace.
*/
- if (!topology_same_node(c, o) && x86_match_cpu(snc_cpu))
+ if (match_pkg(c, o) && !topology_same_node(c, o) && intel_snc)
return false;
return topology_sane(c, o, "llc");
}
-/*
- * Unlike the other levels, we do not enforce keeping a
- * multicore group inside a NUMA node. If this happens, we will
- * discard the MC level of the topology later.
- */
-static bool match_pkg(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
-{
- if (c->phys_proc_id == o->phys_proc_id)
- return true;
- return false;
-}
-
-static bool match_die(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
-{
- if ((c->phys_proc_id == o->phys_proc_id) &&
- (c->cpu_die_id == o->cpu_die_id))
- return true;
- return false;
-}
-
#if defined(CONFIG_SCHED_SMT) || defined(CONFIG_SCHED_MC)
static inline int x86_sched_itmt_flags(void)
@@ -592,14 +595,23 @@ void set_cpu_sibling_map(int cpu)
for_each_cpu(i, cpu_sibling_setup_mask) {
o = &cpu_data(i);
+ if (match_pkg(c, o) && !topology_same_node(c, o))
+ x86_has_numa_in_package = true;
+
if ((i == cpu) || (has_smt && match_smt(c, o)))
link_mask(topology_sibling_cpumask, cpu, i);
if ((i == cpu) || (has_mp && match_llc(c, o)))
link_mask(cpu_llc_shared_mask, cpu, i);
+ if ((i == cpu) || (has_mp && match_die(c, o)))
+ link_mask(topology_die_cpumask, cpu, i);
}
+ threads = cpumask_weight(topology_sibling_cpumask(cpu));
+ if (threads > __max_smt_threads)
+ __max_smt_threads = threads;
+
/*
* This needs a separate iteration over the cpus because we rely on all
* topology_sibling_cpumask links to be set-up.
@@ -613,8 +625,7 @@ void set_cpu_sibling_map(int cpu)
/*
* Does this new cpu bringup a new core?
*/
- if (cpumask_weight(
- topology_sibling_cpumask(cpu)) == 1) {
+ if (threads == 1) {
/*
* for each core in package, increment
* the booted_cores for this new cpu
@@ -631,16 +642,7 @@ void set_cpu_sibling_map(int cpu)
} else if (i != cpu && !c->booted_cores)
c->booted_cores = cpu_data(i).booted_cores;
}
- if (match_pkg(c, o) && !topology_same_node(c, o))
- x86_has_numa_in_package = true;
-
- if ((i == cpu) || (has_mp && match_die(c, o)))
- link_mask(topology_die_cpumask, cpu, i);
}
-
- threads = cpumask_weight(topology_sibling_cpumask(cpu));
- if (threads > __max_smt_threads)
- __max_smt_threads = threads;
}
/* maps the cpu to the sched domain representing multi-core */
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 055/677] async_xor: increase src_offs when dropping destination page
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 054/677] x86, sched: Treat Intel SNC topology as default, COD as exception Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 056/677] md/bitmap: wait for external bitmap writes to complete during tear down Greg Kroah-Hartman
` (628 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Xiao Ni, Song Liu
From: Xiao Ni <xni@redhat.com>
commit ceaf2966ab082bbc4d26516f97b3ca8a676e2af8 upstream.
Now we support sharing one page if PAGE_SIZE is not equal stripe size. To
support this, it needs to support calculating xor value with different
offsets for each r5dev. One offset array is used to record those offsets.
In RMW mode, parity page is used as a source page. It sets
ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5.
So it needs to add src_list and src_offs at the same time. Now it only
needs src_list. So the xor value which is calculated is wrong. It can
cause data corruption problem.
I can reproduce this problem 100% on a POWER8 machine. The steps are:
mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G
mkfs.xfs /dev/md0
mount /dev/md0 /mnt/test
mount: /mnt/test: mount(2) system call failed: Structure needs cleaning.
Fixes: 29bcff787a25 ("md/raid5: add new xor function to support different page offset")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
crypto/async_tx/async_xor.c | 1 +
1 file changed, 1 insertion(+)
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -233,6 +233,7 @@ async_xor_offs(struct page *dest, unsign
if (submit->flags & ASYNC_TX_XOR_DROP_DST) {
src_cnt--;
src_list++;
+ src_offs++;
}
/* wait for any prerequisite operations */
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 056/677] md/bitmap: wait for external bitmap writes to complete during tear down
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 055/677] async_xor: increase src_offs when dropping destination page Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 057/677] md-cluster: fix use-after-free issue when removing rdev Greg Kroah-Hartman
` (627 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sudhakar Panneerselvam, Zhao Heming,
Song Liu
From: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
commit 404a8ef512587b2460107d3272c17a89aef75edf upstream.
NULL pointer dereference was observed in super_written() when it tries
to access the mddev structure.
[The below stack trace is from an older kernel, but the problem described
in this patch applies to the mainline kernel.]
[ 1194.474861] task: ffff8fdd20858000 task.stack: ffffb99d40790000
[ 1194.488000] RIP: 0010:super_written+0x29/0xe1
[ 1194.499688] RSP: 0018:ffff8ffb7fcc3c78 EFLAGS: 00010046
[ 1194.512477] RAX: 0000000000000000 RBX: ffff8ffb7bf4a000 RCX: ffff8ffb78991048
[ 1194.527325] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ffb56b8a200
[ 1194.542576] RBP: ffff8ffb7fcc3c90 R08: 000000000000000b R09: 0000000000000000
[ 1194.558001] R10: ffff8ffb56b8a298 R11: 0000000000000000 R12: ffff8ffb56b8a200
[ 1194.573070] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1194.588117] FS: 0000000000000000(0000) GS:ffff8ffb7fcc0000(0000) knlGS:0000000000000000
[ 1194.604264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1194.617375] CR2: 00000000000002b8 CR3: 00000021e040a002 CR4: 00000000007606e0
[ 1194.632327] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1194.647865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1194.663316] PKRU: 55555554
[ 1194.674090] Call Trace:
[ 1194.683735] <IRQ>
[ 1194.692948] bio_endio+0xae/0x135
[ 1194.703580] blk_update_request+0xad/0x2fa
[ 1194.714990] blk_update_bidi_request+0x20/0x72
[ 1194.726578] __blk_end_bidi_request+0x2c/0x4d
[ 1194.738373] __blk_end_request_all+0x31/0x49
[ 1194.749344] blk_flush_complete_seq+0x377/0x383
[ 1194.761550] flush_end_io+0x1dd/0x2a7
[ 1194.772910] blk_finish_request+0x9f/0x13c
[ 1194.784544] scsi_end_request+0x180/0x25c
[ 1194.796149] scsi_io_completion+0xc8/0x610
[ 1194.807503] scsi_finish_command+0xdc/0x125
[ 1194.818897] scsi_softirq_done+0x81/0xde
[ 1194.830062] blk_done_softirq+0xa4/0xcc
[ 1194.841008] __do_softirq+0xd9/0x29f
[ 1194.851257] irq_exit+0xe6/0xeb
[ 1194.861290] do_IRQ+0x59/0xe3
[ 1194.871060] common_interrupt+0x1c6/0x382
[ 1194.881988] </IRQ>
[ 1194.890646] RIP: 0010:cpuidle_enter_state+0xdd/0x2a5
[ 1194.902532] RSP: 0018:ffffb99d40793e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff43
[ 1194.917317] RAX: ffff8ffb7fce27c0 RBX: ffff8ffb7fced800 RCX: 000000000000001f
[ 1194.932056] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000
[ 1194.946428] RBP: ffffb99d40793ea0 R08: 0000000000000004 R09: 0000000000002ed2
[ 1194.960508] R10: 0000000000002664 R11: 0000000000000018 R12: 0000000000000003
[ 1194.974454] R13: 000000000000000b R14: ffffffff925715a0 R15: 0000011610120d5a
[ 1194.988607] ? cpuidle_enter_state+0xcc/0x2a5
[ 1194.999077] cpuidle_enter+0x17/0x19
[ 1195.008395] call_cpuidle+0x23/0x3a
[ 1195.017718] do_idle+0x172/0x1d5
[ 1195.026358] cpu_startup_entry+0x73/0x75
[ 1195.035769] start_secondary+0x1b9/0x20b
[ 1195.044894] secondary_startup_64+0xa5/0xa5
[ 1195.084921] RIP: super_written+0x29/0xe1 RSP: ffff8ffb7fcc3c78
[ 1195.096354] CR2: 00000000000002b8
bio in the above stack is a bitmap write whose completion is invoked after
the tear down sequence sets the mddev structure to NULL in rdev.
During tear down, there is an attempt to flush the bitmap writes, but for
external bitmaps, there is no explicit wait for all the bitmap writes to
complete. For instance, md_bitmap_flush() is called to flush the bitmap
writes, but the last call to md_bitmap_daemon_work() in md_bitmap_flush()
could generate new bitmap writes for which there is no explicit wait to
complete those writes. The call to md_bitmap_update_sb() will return
simply for external bitmaps and the follow-up call to md_update_sb() is
conditional and may not get called for external bitmaps. This results in a
kernel panic when the completion routine, super_written() is called which
tries to reference mddev in the rdev that has been set to
NULL(in unbind_rdev_from_array() by tear down sequence).
The solution is to call md_super_wait() for external bitmaps after the
last call to md_bitmap_daemon_work() in md_bitmap_flush() to ensure there
are no pending bitmap writes before proceeding with the tear down.
Cc: stable@vger.kernel.org
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Reviewed-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md-bitmap.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -1722,6 +1722,8 @@ void md_bitmap_flush(struct mddev *mddev
md_bitmap_daemon_work(mddev);
bitmap->daemon_lastrun -= sleep;
md_bitmap_daemon_work(mddev);
+ if (mddev->bitmap_info.external)
+ md_super_wait(mddev);
md_bitmap_update_sb(bitmap);
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 057/677] md-cluster: fix use-after-free issue when removing rdev
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 056/677] md/bitmap: wait for external bitmap writes to complete during tear down Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 058/677] md: split mddev_find Greg Kroah-Hartman
` (626 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gang He, Heming Zhao, Song Liu
From: Heming Zhao <heming.zhao@suse.com>
commit f7c7a2f9a23e5b6e0f5251f29648d0238bb7757e upstream.
md_kick_rdev_from_array will remove rdev, so we should
use rdev_for_each_safe to search list.
How to trigger:
env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns).
```
node2=192.168.0.3
for i in {1..20}; do
echo ==== $i `date` ====;
mdadm -Ss && ssh ${node2} "mdadm -Ss"
wipefs -a /dev/sda /dev/sdb
mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \
/dev/sdb --assume-clean
ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
mdadm --wait /dev/md0
ssh ${node2} "mdadm --wait /dev/md0"
mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda
sleep 1
done
```
Crash stack:
```
stack segment: 0000 [#1] SMP
... ...
RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod]
... ...
RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50
RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246
RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800
FS: 0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
raid1d+0x5c/0xd40 [raid1]
? finish_task_switch+0x75/0x2a0
? lock_timer_base+0x67/0x80
? try_to_del_timer_sync+0x4d/0x80
? del_timer_sync+0x41/0x50
? schedule_timeout+0x254/0x2d0
? md_start_sync+0xe0/0xe0 [md_mod]
? md_thread+0x127/0x160 [md_mod]
md_thread+0x127/0x160 [md_mod]
? wait_woken+0x80/0x80
kthread+0x10d/0x130
? kthread_park+0xa0/0xa0
ret_from_fork+0x1f/0x40
```
Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code")
Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment")
Cc: stable@vger.kernel.org
Reviewed-by: Gang He <ghe@suse.com>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9251,11 +9251,11 @@ void md_check_recovery(struct mddev *mdd
}
if (mddev_is_clustered(mddev)) {
- struct md_rdev *rdev;
+ struct md_rdev *rdev, *tmp;
/* kick the device if another node issued a
* remove disk.
*/
- rdev_for_each(rdev, mddev) {
+ rdev_for_each_safe(rdev, tmp, mddev) {
if (test_and_clear_bit(ClusterRemove, &rdev->flags) &&
rdev->raid_disk < 0)
md_kick_rdev_from_array(rdev);
@@ -9569,7 +9569,7 @@ err_wq:
static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
{
struct mdp_superblock_1 *sb = page_address(rdev->sb_page);
- struct md_rdev *rdev2;
+ struct md_rdev *rdev2, *tmp;
int role, ret;
char b[BDEVNAME_SIZE];
@@ -9586,7 +9586,7 @@ static void check_sb_changes(struct mdde
}
/* Check for change of roles in the active devices */
- rdev_for_each(rdev2, mddev) {
+ rdev_for_each_safe(rdev2, tmp, mddev) {
if (test_bit(Faulty, &rdev2->flags))
continue;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 058/677] md: split mddev_find
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 057/677] md-cluster: fix use-after-free issue when removing rdev Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 059/677] md: factor out a mddev_find_locked helper from mddev_find Greg Kroah-Hartman
` (625 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
From: Christoph Hellwig <hch@lst.de>
commit 65aa97c4d2bfd76677c211b9d03ef05a98c6d68e upstream.
Split mddev_find into a simple mddev_find that just finds an existing
mddev by the unit number, and a more complicated mddev_find that deals
with find or allocating a mddev.
This turns out to fix this bug reported by Zhao Heming.
----------------------------- snip ------------------------------
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
---
drivers/md/md.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -736,6 +736,22 @@ EXPORT_SYMBOL_GPL(mddev_init);
static struct mddev *mddev_find(dev_t unit)
{
+ struct mddev *mddev;
+
+ if (MAJOR(unit) != MD_MAJOR)
+ unit &= ~((1 << MdpMinorShift) - 1);
+
+ spin_lock(&all_mddevs_lock);
+ mddev = mddev_find_locked(unit);
+ if (mddev)
+ mddev_get(mddev);
+ spin_unlock(&all_mddevs_lock);
+
+ return mddev;
+}
+
+static struct mddev *mddev_find_or_alloc(dev_t unit)
+{
struct mddev *mddev, *new = NULL;
if (unit && MAJOR(unit) != MD_MAJOR)
@@ -5644,7 +5660,7 @@ static int md_alloc(dev_t dev, char *nam
* writing to /sys/module/md_mod/parameters/new_array.
*/
static DEFINE_MUTEX(disks_mutex);
- struct mddev *mddev = mddev_find(dev);
+ struct mddev *mddev = mddev_find_or_alloc(dev);
struct gendisk *disk;
int partitioned;
int shift;
@@ -6524,11 +6540,9 @@ static void autorun_devices(int part)
md_probe(dev);
mddev = mddev_find(dev);
- if (!mddev || !mddev->gendisk) {
- if (mddev)
- mddev_put(mddev);
+ if (!mddev)
break;
- }
+
if (mddev_lock(mddev))
pr_warn("md: %s locked, cannot run\n", mdname(mddev));
else if (mddev->raid_disks || mddev->major_version
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 059/677] md: factor out a mddev_find_locked helper from mddev_find
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 058/677] md: split mddev_find Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 060/677] md: md_open returns -EBUSY when entering racing area Greg Kroah-Hartman
` (624 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Heming Zhao, Christoph Hellwig, Song Liu
From: Christoph Hellwig <hch@lst.de>
commit 8b57251f9a91f5e5a599de7549915d2d226cc3af upstream.
Factor out a self-contained helper to just lookup a mddev by the dev_t
"unit".
Cc: stable@vger.kernel.org
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -734,6 +734,17 @@ void mddev_init(struct mddev *mddev)
}
EXPORT_SYMBOL_GPL(mddev_init);
+static struct mddev *mddev_find_locked(dev_t unit)
+{
+ struct mddev *mddev;
+
+ list_for_each_entry(mddev, &all_mddevs, all_mddevs)
+ if (mddev->unit == unit)
+ return mddev;
+
+ return NULL;
+}
+
static struct mddev *mddev_find(dev_t unit)
{
struct mddev *mddev;
@@ -761,13 +772,13 @@ static struct mddev *mddev_find_or_alloc
spin_lock(&all_mddevs_lock);
if (unit) {
- list_for_each_entry(mddev, &all_mddevs, all_mddevs)
- if (mddev->unit == unit) {
- mddev_get(mddev);
- spin_unlock(&all_mddevs_lock);
- kfree(new);
- return mddev;
- }
+ mddev = mddev_find_locked(unit);
+ if (mddev) {
+ mddev_get(mddev);
+ spin_unlock(&all_mddevs_lock);
+ kfree(new);
+ return mddev;
+ }
if (new) {
list_add(&new->all_mddevs, &all_mddevs);
@@ -793,12 +804,7 @@ static struct mddev *mddev_find_or_alloc
return NULL;
}
- is_free = 1;
- list_for_each_entry(mddev, &all_mddevs, all_mddevs)
- if (mddev->unit == dev) {
- is_free = 0;
- break;
- }
+ is_free = !mddev_find_locked(dev);
}
new->unit = dev;
new->md_minor = MINOR(dev);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 060/677] md: md_open returns -EBUSY when entering racing area
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 059/677] md: factor out a mddev_find_locked helper from mddev_find Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 061/677] md: Fix missing unused status line of /proc/mdstat Greg Kroah-Hartman
` (623 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
From: Zhao Heming <heming.zhao@suse.com>
commit 6a4db2a60306eb65bfb14ccc9fde035b74a4b4e7 upstream.
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.
This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).
For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.
---
drivers/md/md.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7841,8 +7841,7 @@ static int md_open(struct block_device *
/* Wait until bdev->bd_disk is definitely gone */
if (work_pending(&mddev->del_work))
flush_workqueue(md_misc_wq);
- /* Then retry the open from the top */
- return -ERESTARTSYS;
+ return -EBUSY;
}
BUG_ON(mddev != bdev->bd_disk->private_data);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 061/677] md: Fix missing unused status line of /proc/mdstat
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 060/677] md: md_open returns -EBUSY when entering racing area Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 062/677] MIPS: Reinstate platform `__div64_32 handler Greg Kroah-Hartman
` (622 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Glauber, Song Liu
From: Jan Glauber <jglauber@digitalocean.com>
commit 7abfabaf5f805f5171d133ce6af9b65ab766e76a upstream.
Reading /proc/mdstat with a read buffer size that would not
fit the unused status line in the first read will skip this
line from the output.
So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something
like: unused devices: <none>
Don't return NULL immediately in start() for v=2 but call
show() once to print the status line also for multiple reads.
Cc: stable@vger.kernel.org
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: Jan Glauber <jglauber@digitalocean.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8172,7 +8172,11 @@ static void *md_seq_start(struct seq_fil
loff_t l = *pos;
struct mddev *mddev;
- if (l >= 0x10000)
+ if (l == 0x10000) {
+ ++*pos;
+ return (void *)2;
+ }
+ if (l > 0x10000)
return NULL;
if (!l--)
/* header */
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 062/677] MIPS: Reinstate platform `__div64_32 handler
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 061/677] md: Fix missing unused status line of /proc/mdstat Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 063/677] MIPS: generic: Update node names to avoid unit addresses Greg Kroah-Hartman
` (621 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huacai Chen, Maciej W. Rozycki,
Thomas Bogendoerfer
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit c49f71f60754acbff37505e1d16ca796bf8a8140 upstream.
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/div64.h | 57 ++++++++++++++++++++++++++++++------------
1 file changed, 41 insertions(+), 16 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2004 Maciej W. Rozycki
+ * Copyright (C) 2000, 2004, 2021 Maciej W. Rozycki
* Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,25 +9,18 @@
#ifndef __ASM_DIV64_H
#define __ASM_DIV64_H
-#include <asm-generic/div64.h>
-
-#if BITS_PER_LONG == 64
+#include <asm/bitsperlong.h>
-#include <linux/types.h>
+#if BITS_PER_LONG == 32
/*
* No traps on overflows for any of these...
*/
-#define __div64_32(n, base) \
-({ \
+#define do_div64_32(res, high, low, base) ({ \
unsigned long __cf, __tmp, __tmp2, __i; \
unsigned long __quot32, __mod32; \
- unsigned long __high, __low; \
- unsigned long long __n; \
\
- __high = *__n >> 32; \
- __low = __n; \
__asm__( \
" .set push \n" \
" .set noat \n" \
@@ -51,18 +44,50 @@
" subu %0, %0, %z6 \n" \
" addiu %2, %2, 1 \n" \
"3: \n" \
- " bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
+ " bnez %4, 0b \n" \
+ " srl %5, %1, 0x1f \n" \
" .set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (__high), "1" (__low)); \
+ : "Jr" (base), "0" (high), "1" (low)); \
\
- (__n) = __quot32; \
+ (res) = __quot32; \
__mod32; \
})
-#endif /* BITS_PER_LONG == 64 */
+#define __div64_32(n, base) ({ \
+ unsigned long __upper, __low, __high, __radix; \
+ unsigned long long __modquot; \
+ unsigned long long __quot; \
+ unsigned long long __div; \
+ unsigned long __mod; \
+ \
+ __div = (*n); \
+ __radix = (base); \
+ \
+ __high = __div >> 32; \
+ __low = __div; \
+ __upper = __high; \
+ \
+ if (__high) { \
+ __asm__("divu $0, %z1, %z2" \
+ : "=x" (__modquot) \
+ : "Jr" (__high), "Jr" (__radix)); \
+ __upper = __modquot >> 32; \
+ __high = __modquot; \
+ } \
+ \
+ __mod = do_div64_32(__low, __upper, __low, __radix); \
+ \
+ __quot = __high; \
+ __quot = __quot << 32 | __low; \
+ (*n) = __quot; \
+ __mod; \
+})
+
+#endif /* BITS_PER_LONG == 32 */
+
+#include <asm-generic/div64.h>
#endif /* __ASM_DIV64_H */
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 063/677] MIPS: generic: Update node names to avoid unit addresses
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 062/677] MIPS: Reinstate platform `__div64_32 handler Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 064/677] mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put() Greg Kroah-Hartman
` (620 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Simon Glass, Nathan Chancellor,
Tom Rini, Thomas Bogendoerfer
From: Nathan Chancellor <nathan@kernel.org>
commit e607ff630c6053ecc67502677c0e50053d7892d4 upstream.
With the latest mkimage from U-Boot 2021.04, the generic defconfigs no
longer build, failing with:
/usr/bin/mkimage: verify_header failed for FIT Image support with exit code 1
This is expected after the linked U-Boot commits because '@' is
forbidden in the node names due to the way that libfdt treats nodes with
the same prefix but different unit addresses.
Switch the '@' in the node name to '-'. Drop the unit addresses from the
hash and kernel child nodes because there is only one node so they do
not need to have a number to differentiate them.
Cc: stable@vger.kernel.org
Link: https://source.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4
Link: https://source.denx.de/u-boot/u-boot/-/commit/3f04db891a353f4b127ed57279279f851c6b4917
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/generic/board-boston.its.S | 10 +++++-----
arch/mips/generic/board-jaguar2.its.S | 16 ++++++++--------
arch/mips/generic/board-luton.its.S | 8 ++++----
arch/mips/generic/board-ni169445.its.S | 10 +++++-----
arch/mips/generic/board-ocelot.its.S | 20 ++++++++++----------
arch/mips/generic/board-serval.its.S | 8 ++++----
arch/mips/generic/board-xilfpga.its.S | 10 +++++-----
arch/mips/generic/vmlinux.its.S | 10 +++++-----
8 files changed, 46 insertions(+), 46 deletions(-)
--- a/arch/mips/generic/board-boston.its.S
+++ b/arch/mips/generic/board-boston.its.S
@@ -1,22 +1,22 @@
/ {
images {
- fdt@boston {
+ fdt-boston {
description = "img,boston Device Tree";
data = /incbin/("boot/dts/img/boston.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
};
configurations {
- conf@boston {
+ conf-boston {
description = "Boston Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@boston";
+ kernel = "kernel";
+ fdt = "fdt-boston";
};
};
};
--- a/arch/mips/generic/board-jaguar2.its.S
+++ b/arch/mips/generic/board-jaguar2.its.S
@@ -1,23 +1,23 @@
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/ {
images {
- fdt@jaguar2_pcb110 {
+ fdt-jaguar2_pcb110 {
description = "MSCC Jaguar2 PCB110 Device Tree";
data = /incbin/("boot/dts/mscc/jaguar2_pcb110.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
- fdt@jaguar2_pcb111 {
+ fdt-jaguar2_pcb111 {
description = "MSCC Jaguar2 PCB111 Device Tree";
data = /incbin/("boot/dts/mscc/jaguar2_pcb111.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
@@ -26,14 +26,14 @@
configurations {
pcb110 {
description = "Jaguar2 Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@jaguar2_pcb110";
+ kernel = "kernel";
+ fdt = "fdt-jaguar2_pcb110";
ramdisk = "ramdisk";
};
pcb111 {
description = "Jaguar2 Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@jaguar2_pcb111";
+ kernel = "kernel";
+ fdt = "fdt-jaguar2_pcb111";
ramdisk = "ramdisk";
};
};
--- a/arch/mips/generic/board-luton.its.S
+++ b/arch/mips/generic/board-luton.its.S
@@ -1,13 +1,13 @@
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/ {
images {
- fdt@luton_pcb091 {
+ fdt-luton_pcb091 {
description = "MSCC Luton PCB091 Device Tree";
data = /incbin/("boot/dts/mscc/luton_pcb091.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
@@ -16,8 +16,8 @@
configurations {
pcb091 {
description = "Luton Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@luton_pcb091";
+ kernel = "kernel";
+ fdt = "fdt-luton_pcb091";
};
};
};
--- a/arch/mips/generic/board-ni169445.its.S
+++ b/arch/mips/generic/board-ni169445.its.S
@@ -1,22 +1,22 @@
/ {
images {
- fdt@ni169445 {
+ fdt-ni169445 {
description = "NI 169445 device tree";
data = /incbin/("boot/dts/ni/169445.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
};
configurations {
- conf@ni169445 {
+ conf-ni169445 {
description = "NI 169445 Linux Kernel";
- kernel = "kernel@0";
- fdt = "fdt@ni169445";
+ kernel = "kernel";
+ fdt = "fdt-ni169445";
};
};
};
--- a/arch/mips/generic/board-ocelot.its.S
+++ b/arch/mips/generic/board-ocelot.its.S
@@ -1,40 +1,40 @@
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/ {
images {
- fdt@ocelot_pcb123 {
+ fdt-ocelot_pcb123 {
description = "MSCC Ocelot PCB123 Device Tree";
data = /incbin/("boot/dts/mscc/ocelot_pcb123.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
- fdt@ocelot_pcb120 {
+ fdt-ocelot_pcb120 {
description = "MSCC Ocelot PCB120 Device Tree";
data = /incbin/("boot/dts/mscc/ocelot_pcb120.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
};
configurations {
- conf@ocelot_pcb123 {
+ conf-ocelot_pcb123 {
description = "Ocelot Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@ocelot_pcb123";
+ kernel = "kernel";
+ fdt = "fdt-ocelot_pcb123";
};
- conf@ocelot_pcb120 {
+ conf-ocelot_pcb120 {
description = "Ocelot Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@ocelot_pcb120";
+ kernel = "kernel";
+ fdt = "fdt-ocelot_pcb120";
};
};
};
--- a/arch/mips/generic/board-serval.its.S
+++ b/arch/mips/generic/board-serval.its.S
@@ -1,13 +1,13 @@
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/ {
images {
- fdt@serval_pcb105 {
+ fdt-serval_pcb105 {
description = "MSCC Serval PCB105 Device Tree";
data = /incbin/("boot/dts/mscc/serval_pcb105.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
@@ -16,8 +16,8 @@
configurations {
pcb105 {
description = "Serval Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@serval_pcb105";
+ kernel = "kernel";
+ fdt = "fdt-serval_pcb105";
ramdisk = "ramdisk";
};
};
--- a/arch/mips/generic/board-xilfpga.its.S
+++ b/arch/mips/generic/board-xilfpga.its.S
@@ -1,22 +1,22 @@
/ {
images {
- fdt@xilfpga {
+ fdt-xilfpga {
description = "MIPSfpga (xilfpga) Device Tree";
data = /incbin/("boot/dts/xilfpga/nexys4ddr.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
- hash@0 {
+ hash {
algo = "sha1";
};
};
};
configurations {
- conf@xilfpga {
+ conf-xilfpga {
description = "MIPSfpga Linux kernel";
- kernel = "kernel@0";
- fdt = "fdt@xilfpga";
+ kernel = "kernel";
+ fdt = "fdt-xilfpga";
};
};
};
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -6,7 +6,7 @@
#address-cells = <ADDR_CELLS>;
images {
- kernel@0 {
+ kernel {
description = KERNEL_NAME;
data = /incbin/(VMLINUX_BINARY);
type = "kernel";
@@ -15,18 +15,18 @@
compression = VMLINUX_COMPRESSION;
load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
- hash@0 {
+ hash {
algo = "sha1";
};
};
};
configurations {
- default = "conf@default";
+ default = "conf-default";
- conf@default {
+ conf-default {
description = "Generic Linux kernel";
- kernel = "kernel@0";
+ kernel = "kernel";
};
};
};
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 064/677] mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 063/677] MIPS: generic: Update node names to avoid unit addresses Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 065/677] ipw2x00: potential buffer overflow in libipw_wx_set_encodeext() Greg Kroah-Hartman
` (619 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau
From: Ryder Lee <ryder.lee@mediatek.com>
commit 06991d1f73a9bdbc5f234ee96737b9102705b89c upstream.
We should use ieee80211_free_txskb() to report skb status avoid wrong
aql accounting after reset.
Cc: stable@vger.kernel.org
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2000,8 +2000,12 @@ void mt7615_tx_token_put(struct mt7615_d
spin_lock_bh(&dev->token_lock);
idr_for_each_entry(&dev->token, txwi, id) {
mt7615_txp_skb_unmap(&dev->mt76, txwi);
- if (txwi->skb)
- dev_kfree_skb_any(txwi->skb);
+ if (txwi->skb) {
+ struct ieee80211_hw *hw;
+
+ hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+ ieee80211_free_txskb(hw, txwi->skb);
+ }
mt76_put_txwi(&dev->mt76, txwi);
}
spin_unlock_bh(&dev->token_lock);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 065/677] ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 064/677] mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put() Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 066/677] net: xilinx: drivers need/depend on HAS_IOMEM Greg Kroah-Hartman
` (618 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Stanislav Yakovlev,
Kalle Valo
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 260a9ad9446723d4063ed802989758852809714d upstream.
The "ext->key_len" is a u16 that comes from the user. If it's over
SCM_KEY_LEN (32) that could lead to memory corruption.
Fixes: e0d369d1d969 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/intel/ipw2x00/libipw_wx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/intel/ipw2x00/libipw_wx.c
+++ b/drivers/net/wireless/intel/ipw2x00/libipw_wx.c
@@ -633,8 +633,10 @@ int libipw_wx_set_encodeext(struct libip
}
if (ext->alg != IW_ENCODE_ALG_NONE) {
- memcpy(sec.keys[idx], ext->key, ext->key_len);
- sec.key_sizes[idx] = ext->key_len;
+ int key_len = clamp_val(ext->key_len, 0, SCM_KEY_LEN);
+
+ memcpy(sec.keys[idx], ext->key, key_len);
+ sec.key_sizes[idx] = key_len;
sec.flags |= (1 << idx);
if (ext->alg == IW_ENCODE_ALG_WEP) {
sec.encode_alg[idx] = SEC_ALG_WEP;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 066/677] net: xilinx: drivers need/depend on HAS_IOMEM
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 065/677] ipw2x00: potential buffer overflow in libipw_wx_set_encodeext() Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 067/677] cfg80211: scan: drop entry from hidden_list on overflow Greg Kroah-Hartman
` (617 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, kernel test robot,
Radhey Shyam Pandey, Gary Guo, Zhang Changzhong, Andre Przywara,
Daniel Borkmann, David S. Miller, Jakub Kicinski, netdev
From: Randy Dunlap <rdunlap@infradead.org>
commit 46fd4471615c1bff9d87c411140807762c25667a upstream.
kernel test robot reports build errors in 3 Xilinx ethernet drivers.
They all use ioremap functions that are only available when HAS_IOMEM
is set/enabled. If it is not enabled, they all have build errors,
so make these 3 drivers depend on HAS_IOMEM.
ld: drivers/net/ethernet/xilinx/xilinx_emaclite.o: in function `xemaclite_of_probe':
xilinx_emaclite.c:(.text+0x9fc): undefined reference to `devm_ioremap_resource'
ld: drivers/net/ethernet/xilinx/xilinx_axienet_main.o: in function `axienet_probe':
xilinx_axienet_main.c:(.text+0x942): undefined reference to `devm_ioremap_resource'
ld: drivers/net/ethernet/xilinx/ll_temac_main.o: in function `temac_probe':
ll_temac_main.c:(.text+0x1283): undefined reference to `devm_platform_ioremap_resource_byname'
ld: ll_temac_main.c:(.text+0x13ad): undefined reference to `devm_of_iomap'
ld: ll_temac_main.c:(.text+0x162e): undefined reference to `devm_platform_ioremap_resource'
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Zhang Changzhong <zhangchangzhong@huawei.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: stable@vger.kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/xilinx/Kconfig | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -18,12 +18,14 @@ if NET_VENDOR_XILINX
config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
+ depends on HAS_IOMEM
select PHYLIB
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
config XILINX_AXI_EMAC
tristate "Xilinx 10/100/1000 AXI Ethernet support"
+ depends on HAS_IOMEM
select PHYLINK
help
This driver supports the 10/100/1000 Ethernet from Xilinx for the
@@ -31,6 +33,7 @@ config XILINX_AXI_EMAC
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+ depends on HAS_IOMEM
select PHYLIB
help
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 067/677] cfg80211: scan: drop entry from hidden_list on overflow
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 066/677] net: xilinx: drivers need/depend on HAS_IOMEM Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 068/677] rtw88: Fix array overrun in rtw_get_tx_power_params() Greg Kroah-Hartman
` (616 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit 010bfbe768f7ecc876ffba92db30432de4997e2a upstream.
If we overflow the maximum number of BSS entries and free the
new entry, drop it from any hidden_list that it may have been
added to in the code above or in cfg80211_combine_bsses().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210416094212.5de7d1676ad7.Ied283b0bc5f504845e7d6ab90626bdfa68bb3dc0@changeid
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/scan.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1751,6 +1751,8 @@ cfg80211_bss_update(struct cfg80211_regi
if (rdev->bss_entries >= bss_entries_limit &&
!cfg80211_bss_expire_oldest(rdev)) {
+ if (!list_empty(&new->hidden_list))
+ list_del(&new->hidden_list);
kfree(new);
goto drop;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 068/677] rtw88: Fix array overrun in rtw_get_tx_power_params()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 067/677] cfg80211: scan: drop entry from hidden_list on overflow Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 069/677] mt76: fix potential DMA mapping leak Greg Kroah-Hartman
` (615 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable,
Богдан
Пилипенко,
Larry Finger, Ping-Ke Shih, Kalle Valo
From: Ping-Ke Shih <pkshih@realtek.com>
commit 2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e upstream.
Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the
following array overrun is logged:
================================================================================
UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34
index 5 is out of range for type 'u8 [5]'
CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Workqueue: phy0 ieee80211_scan_work [mac80211]
Call Trace:
dump_stack+0x64/0x7c
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold+0x43/0x48
rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]
? rtw_pci_read16+0x20/0x20 [rtw_pci]
? check_hw_ready+0x50/0x90 [rtw_core]
rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]
rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]
rtw_set_channel+0xab/0x110 [rtw_core]
rtw_ops_config+0x87/0xc0 [rtw_core]
ieee80211_hw_config+0x9d/0x130 [mac80211]
ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]
ieee80211_scan_work+0x19f/0x2a0 [mac80211]
process_one_work+0x1dd/0x3a0
worker_thread+0x49/0x330
? rescuer_thread+0x3a0/0x3a0
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
================================================================================
The statement where an array is being overrun is shown in the following snippet:
if (rate <= DESC_RATE11M)
tx_power = pwr_idx_2g->cck_base[group];
else
====> tx_power = pwr_idx_2g->bw40_base[group];
The associated arrays are defined in main.h as follows:
struct rtw_2g_txpwr_idx {
u8 cck_base[6];
u8 bw40_base[5];
struct rtw_2g_1s_pwr_idx_diff ht_1s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_2s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_3s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_4s_diff;
};
The problem arises because the value of group is 5 for channel 14. The trivial
increase in the dimension of bw40_base fails as this struct must match the layout of
efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set
the group for channel 14 to 4 if rate <= DESC_RATE11M.
This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")
Fixes: fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")
Reported-by: Богдан Пилипенко <bogdan.pylypenko107@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210401192717.28927-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtw88/phy.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -1584,7 +1584,7 @@ void rtw_phy_load_tables(struct rtw_dev
}
EXPORT_SYMBOL(rtw_phy_load_tables);
-static u8 rtw_get_channel_group(u8 channel)
+static u8 rtw_get_channel_group(u8 channel, u8 rate)
{
switch (channel) {
default:
@@ -1628,6 +1628,7 @@ static u8 rtw_get_channel_group(u8 chann
case 106:
return 4;
case 14:
+ return rate <= DESC_RATE11M ? 5 : 4;
case 108:
case 110:
case 112:
@@ -1879,7 +1880,7 @@ void rtw_get_tx_power_params(struct rtw_
s8 *remnant = &pwr_param->pwr_remnant;
pwr_idx = &rtwdev->efuse.txpwr_idx_table[path];
- group = rtw_get_channel_group(ch);
+ group = rtw_get_channel_group(ch, rate);
/* base power index for 2.4G/5G */
if (IS_CH_2G_BAND(ch)) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 069/677] mt76: fix potential DMA mapping leak
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 068/677] rtw88: Fix array overrun in rtw_get_tx_power_params() Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 070/677] FDDI: defxx: Make MMIO the configuration default except for EISA Greg Kroah-Hartman
` (614 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Felix Fietkau
From: Felix Fietkau <nbd@nbd.name>
commit b4403cee6400c5f679e9c4a82b91d61aa961eccf upstream.
With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap
could potentially inherit a non-zero value from stack garbage.
If this happens, it will cause DMA mappings for MCU command frames to not be
unmapped after completion
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/mediatek/mt76/dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -309,7 +309,7 @@ static int
mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, struct mt76_queue *q,
struct sk_buff *skb, u32 tx_info)
{
- struct mt76_queue_buf buf;
+ struct mt76_queue_buf buf = {};
dma_addr_t addr;
if (q->queued + 1 >= q->ndesc - 1)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 070/677] FDDI: defxx: Make MMIO the configuration default except for EISA
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 069/677] mt76: fix potential DMA mapping leak Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 071/677] drm/qxl: use ttm bo priorities Greg Kroah-Hartman
` (613 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, David S. Miller
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit 193ced4a79599352d63cb8c9e2f0c6043106eb6a upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems. It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support. However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.
Make DEFXX_MMIO the configuration default then, except where configured
for EISA. This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core. Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.
The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.
Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e89a2cfb7d7b ("[TC] defxx: TURBOchannel support")
Cc: stable@vger.kernel.org # v2.6.21+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/fddi/Kconfig | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -40,17 +40,20 @@ config DEFXX
config DEFXX_MMIO
bool
- prompt "Use MMIO instead of PIO" if PCI || EISA
+ prompt "Use MMIO instead of IOP" if PCI || EISA
depends on DEFXX
- default n if PCI || EISA
+ default n if EISA
default y
help
This instructs the driver to use EISA or PCI memory-mapped I/O
- (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ (MMIO) as appropriate instead of programmed I/O ports (IOP).
Enabling this gives an improvement in processing time in parts
- of the driver, but it may cause problems with EISA (DEFEA)
- adapters. TURBOchannel does not have the concept of I/O ports,
- so MMIO is always used for these (DEFTA) adapters.
+ of the driver, but it requires a memory window to be configured
+ for EISA (DEFEA) adapters that may not always be available.
+ Conversely some PCIe host bridges do not support IOP, so MMIO
+ may be required to access PCI (DEFPA) adapters on downstream PCI
+ buses with some systems. TURBOchannel does not have the concept
+ of I/O ports, so MMIO is always used for these (DEFTA) adapters.
If unsure, say N.
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 071/677] drm/qxl: use ttm bo priorities
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 070/677] FDDI: defxx: Make MMIO the configuration default except for EISA Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 072/677] drm/ingenic: Fix non-OSD mode Greg Kroah-Hartman
` (612 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gerd Hoffmann, Thomas Zimmermann
From: Gerd Hoffmann <kraxel@redhat.com>
commit 4fff19ae427548d8c37260c975a4b20d3c040ec6 upstream.
Allow to set priorities for buffer objects. Use priority 1 for surface
and cursor command releases. Use priority 0 for drawing command
releases. That way the short-living drawing commands are first in line
when it comes to eviction, making it *much* less likely that
ttm_bo_mem_force_space() picks something which can't be evicted and
throws an error after waiting a while without success.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/qxl/qxl_cmd.c | 2 +-
drivers/gpu/drm/qxl/qxl_display.c | 4 ++--
drivers/gpu/drm/qxl/qxl_gem.c | 2 +-
drivers/gpu/drm/qxl/qxl_object.c | 5 +++--
drivers/gpu/drm/qxl/qxl_object.h | 1 +
drivers/gpu/drm/qxl/qxl_release.c | 18 ++++++++++++------
6 files changed, 20 insertions(+), 12 deletions(-)
--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -268,7 +268,7 @@ int qxl_alloc_bo_reserved(struct qxl_dev
int ret;
ret = qxl_bo_create(qdev, size, false /* not kernel - device */,
- false, QXL_GEM_DOMAIN_VRAM, NULL, &bo);
+ false, QXL_GEM_DOMAIN_VRAM, 0, NULL, &bo);
if (ret) {
DRM_ERROR("failed to allocate VRAM BO\n");
return ret;
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -798,8 +798,8 @@ static int qxl_plane_prepare_fb(struct d
qdev->dumb_shadow_bo = NULL;
}
qxl_bo_create(qdev, surf.height * surf.stride,
- true, true, QXL_GEM_DOMAIN_SURFACE, &surf,
- &qdev->dumb_shadow_bo);
+ true, true, QXL_GEM_DOMAIN_SURFACE, 0,
+ &surf, &qdev->dumb_shadow_bo);
}
if (user_bo->shadow != qdev->dumb_shadow_bo) {
if (user_bo->shadow) {
--- a/drivers/gpu/drm/qxl/qxl_gem.c
+++ b/drivers/gpu/drm/qxl/qxl_gem.c
@@ -55,7 +55,7 @@ int qxl_gem_object_create(struct qxl_dev
/* At least align on page size */
if (alignment < PAGE_SIZE)
alignment = PAGE_SIZE;
- r = qxl_bo_create(qdev, size, kernel, false, initial_domain, surf, &qbo);
+ r = qxl_bo_create(qdev, size, kernel, false, initial_domain, 0, surf, &qbo);
if (r) {
if (r != -ERESTARTSYS)
DRM_ERROR(
--- a/drivers/gpu/drm/qxl/qxl_object.c
+++ b/drivers/gpu/drm/qxl/qxl_object.c
@@ -103,8 +103,8 @@ static const struct drm_gem_object_funcs
.print_info = drm_gem_ttm_print_info,
};
-int qxl_bo_create(struct qxl_device *qdev,
- unsigned long size, bool kernel, bool pinned, u32 domain,
+int qxl_bo_create(struct qxl_device *qdev, unsigned long size,
+ bool kernel, bool pinned, u32 domain, u32 priority,
struct qxl_surface *surf,
struct qxl_bo **bo_ptr)
{
@@ -137,6 +137,7 @@ int qxl_bo_create(struct qxl_device *qde
qxl_ttm_placement_from_domain(bo, domain);
+ bo->tbo.priority = priority;
r = ttm_bo_init_reserved(&qdev->mman.bdev, &bo->tbo, size, type,
&bo->placement, 0, &ctx, size,
NULL, NULL, &qxl_ttm_bo_destroy);
--- a/drivers/gpu/drm/qxl/qxl_object.h
+++ b/drivers/gpu/drm/qxl/qxl_object.h
@@ -61,6 +61,7 @@ static inline u64 qxl_bo_mmap_offset(str
extern int qxl_bo_create(struct qxl_device *qdev,
unsigned long size,
bool kernel, bool pinned, u32 domain,
+ u32 priority,
struct qxl_surface *surf,
struct qxl_bo **bo_ptr);
extern int qxl_bo_kmap(struct qxl_bo *bo, struct dma_buf_map *map);
--- a/drivers/gpu/drm/qxl/qxl_release.c
+++ b/drivers/gpu/drm/qxl/qxl_release.c
@@ -199,11 +199,12 @@ qxl_release_free(struct qxl_device *qdev
}
static int qxl_release_bo_alloc(struct qxl_device *qdev,
- struct qxl_bo **bo)
+ struct qxl_bo **bo,
+ u32 priority)
{
/* pin releases bo's they are too messy to evict */
return qxl_bo_create(qdev, PAGE_SIZE, false, true,
- QXL_GEM_DOMAIN_VRAM, NULL, bo);
+ QXL_GEM_DOMAIN_VRAM, priority, NULL, bo);
}
int qxl_release_list_add(struct qxl_release *release, struct qxl_bo *bo)
@@ -326,13 +327,18 @@ int qxl_alloc_release_reserved(struct qx
int ret = 0;
union qxl_release_info *info;
int cur_idx;
+ u32 priority;
- if (type == QXL_RELEASE_DRAWABLE)
+ if (type == QXL_RELEASE_DRAWABLE) {
cur_idx = 0;
- else if (type == QXL_RELEASE_SURFACE_CMD)
+ priority = 0;
+ } else if (type == QXL_RELEASE_SURFACE_CMD) {
cur_idx = 1;
- else if (type == QXL_RELEASE_CURSOR_CMD)
+ priority = 1;
+ } else if (type == QXL_RELEASE_CURSOR_CMD) {
cur_idx = 2;
+ priority = 1;
+ }
else {
DRM_ERROR("got illegal type: %d\n", type);
return -EINVAL;
@@ -352,7 +358,7 @@ int qxl_alloc_release_reserved(struct qx
qdev->current_release_bo[cur_idx] = NULL;
}
if (!qdev->current_release_bo[cur_idx]) {
- ret = qxl_release_bo_alloc(qdev, &qdev->current_release_bo[cur_idx]);
+ ret = qxl_release_bo_alloc(qdev, &qdev->current_release_bo[cur_idx], priority);
if (ret) {
mutex_unlock(&qdev->release_mutex);
if (free_bo) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 072/677] drm/ingenic: Fix non-OSD mode
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 071/677] drm/qxl: use ttm bo priorities Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 073/677] drm/panfrost: Clear MMU irqs before handling the fault Greg Kroah-Hartman
` (611 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Daniel Vetter,
H. Nikolaus Schaller
From: Paul Cercueil <paul@crapouillou.net>
commit 7b4957684e5d813fcbdc98144e3cc5c4467b3e2e upstream.
Even though the JZ4740 did not have the OSD mode, it had (according to
the documentation) two DMA channels, but there is absolutely no
information about how to select the second DMA channel.
Make the ingenic-drm driver work in non-OSD mode by using the
foreground0 plane (which is bound to the DMA0 channel) as the primary
plane, instead of the foreground1 plane, which is the primary plane
when in OSD mode.
Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -554,7 +554,7 @@ static void ingenic_drm_plane_atomic_upd
height = state->src_h >> 16;
cpp = state->fb->format->cpp[0];
- if (priv->soc_info->has_osd && plane->type == DRM_PLANE_TYPE_OVERLAY)
+ if (!priv->soc_info->has_osd || plane->type == DRM_PLANE_TYPE_OVERLAY)
hwdesc = &priv->dma_hwdescs->hwdesc_f0;
else
hwdesc = &priv->dma_hwdescs->hwdesc_f1;
@@ -826,6 +826,7 @@ static int ingenic_drm_bind(struct devic
const struct jz_soc_info *soc_info;
struct ingenic_drm *priv;
struct clk *parent_clk;
+ struct drm_plane *primary;
struct drm_bridge *bridge;
struct drm_panel *panel;
struct drm_encoder *encoder;
@@ -940,9 +941,11 @@ static int ingenic_drm_bind(struct devic
if (soc_info->has_osd)
priv->ipu_plane = drm_plane_from_index(drm, 0);
- drm_plane_helper_add(&priv->f1, &ingenic_drm_plane_helper_funcs);
+ primary = priv->soc_info->has_osd ? &priv->f1 : &priv->f0;
- ret = drm_universal_plane_init(drm, &priv->f1, 1,
+ drm_plane_helper_add(primary, &ingenic_drm_plane_helper_funcs);
+
+ ret = drm_universal_plane_init(drm, primary, 1,
&ingenic_drm_primary_plane_funcs,
priv->soc_info->formats_f1,
priv->soc_info->num_formats_f1,
@@ -954,7 +957,7 @@ static int ingenic_drm_bind(struct devic
drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
- ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->f1,
+ ret = drm_crtc_init_with_planes(drm, &priv->crtc, primary,
NULL, &ingenic_drm_crtc_funcs, NULL);
if (ret) {
dev_err(dev, "Failed to init CRTC: %i\n", ret);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 073/677] drm/panfrost: Clear MMU irqs before handling the fault
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 072/677] drm/ingenic: Fix non-OSD mode Greg Kroah-Hartman
@ 2021-05-12 14:41 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 074/677] drm/panfrost: Dont try to map pages that are already mapped Greg Kroah-Hartman
` (610 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:41 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Boris Brezillon, Steven Price
From: Boris Brezillon <boris.brezillon@collabora.com>
commit 3aa0a80fc692c9959c261f4c5bfe9c23ddd90562 upstream.
When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/panfrost/panfrost_mmu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/panfrost/panfrost_mmu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_mmu.c
@@ -593,6 +593,8 @@ static irqreturn_t panfrost_mmu_irq_hand
access_type = (fault_status >> 8) & 0x3;
source_id = (fault_status >> 16);
+ mmu_write(pfdev, MMU_INT_CLEAR, mask);
+
/* Page fault only */
ret = -1;
if ((status & mask) == BIT(i) && (exception_type & 0xF8) == 0xC0)
@@ -616,8 +618,6 @@ static irqreturn_t panfrost_mmu_irq_hand
access_type, access_type_name(pfdev, fault_status),
source_id);
- mmu_write(pfdev, MMU_INT_CLEAR, mask);
-
status &= ~mask;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 074/677] drm/panfrost: Dont try to map pages that are already mapped
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-05-12 14:41 ` [PATCH 5.12 073/677] drm/panfrost: Clear MMU irqs before handling the fault Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 075/677] drm/radeon: fix copy of uninitialized variable back to userspace Greg Kroah-Hartman
` (609 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Boris Brezillon, Steven Price
From: Boris Brezillon <boris.brezillon@collabora.com>
commit f45da8204ff1707c529a8769f5467ff16f504b26 upstream.
We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/panfrost/panfrost_mmu.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/panfrost/panfrost_mmu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_mmu.c
@@ -488,8 +488,14 @@ static int panfrost_mmu_map_fault_addr(s
}
bo->base.pages = pages;
bo->base.pages_use_count = 1;
- } else
+ } else {
pages = bo->base.pages;
+ if (pages[page_offset]) {
+ /* Pages are already mapped, bail out. */
+ mutex_unlock(&bo->base.pages_lock);
+ goto out;
+ }
+ }
mapping = bo->base.base.filp->f_mapping;
mapping_set_unevictable(mapping);
@@ -522,6 +528,7 @@ static int panfrost_mmu_map_fault_addr(s
dev_dbg(pfdev->dev, "mapped page fault @ AS%d %llx", as, addr);
+out:
panfrost_gem_mapping_put(bomapping);
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 075/677] drm/radeon: fix copy of uninitialized variable back to userspace
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 074/677] drm/panfrost: Dont try to map pages that are already mapped Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 076/677] drm/dp_mst: Revise broadcast msg lct & lcr Greg Kroah-Hartman
` (608 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian König, Colin Ian King,
Alex Deucher
From: Colin Ian King <colin.king@canonical.com>
commit 8dbc2ccac5a65c5b57e3070e36a3dc97c7970d96 upstream.
Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can
copy back uninitialised data in value_tmp that pointer *value points
to. This can occur when rdev->family is less than CHIP_BONAIRE and
less than CHIP_TAHITI. Fix this by adding in a missing -EINVAL
so that no invalid value is copied back to userspace.
Addresses-Coverity: ("Uninitialized scalar variable)
Cc: stable@vger.kernel.org # 3.13+
Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/radeon_kms.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -518,6 +518,7 @@ int radeon_info_ioctl(struct drm_device
*value = rdev->config.si.backend_enable_mask;
} else {
DRM_DEBUG_KMS("BACKEND_ENABLED_MASK is si+ only!\n");
+ return -EINVAL;
}
break;
case RADEON_INFO_MAX_SCLK:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 076/677] drm/dp_mst: Revise broadcast msg lct & lcr
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 075/677] drm/radeon: fix copy of uninitialized variable back to userspace Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 077/677] drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast Greg Kroah-Hartman
` (607 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wayne Lin, Lyude Paul
From: Wayne Lin <Wayne.Lin@amd.com>
commit 419e91ea3143bf26991442465ac64d9461e98d96 upstream.
[Why & How]
According to DP spec, broadcast message LCT equals to 1 and LCR equals
to 6. Current implementation is incorrect. Fix it.
In addition, revise a bit the hdr->rad handling to include broadcast
case.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-2-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2829,10 +2829,15 @@ static int set_hdr_from_dst_qlock(struct
else
hdr->broadcast = 0;
hdr->path_msg = txmsg->path_msg;
- hdr->lct = mstb->lct;
- hdr->lcr = mstb->lct - 1;
- if (mstb->lct > 1)
- memcpy(hdr->rad, mstb->rad, mstb->lct / 2);
+ if (hdr->broadcast) {
+ hdr->lct = 1;
+ hdr->lcr = 6;
+ } else {
+ hdr->lct = mstb->lct;
+ hdr->lcr = mstb->lct - 1;
+ }
+
+ memcpy(hdr->rad, mstb->rad, hdr->lct / 2);
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 077/677] drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 076/677] drm/dp_mst: Revise broadcast msg lct & lcr Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 078/677] drm: bridge: fix ANX7625 use of mipi_dsi_() functions Greg Kroah-Hartman
` (606 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wayne Lin, Lyude Paul
From: Wayne Lin <Wayne.Lin@amd.com>
commit d919d3d6cdb31d0f9fe06c880f683a24f2838813 upstream.
[Why & How]
According to DP spec, CLEAR_PAYLOAD_ID_TABLE is a path broadcast request
message and current implementation is incorrect. Fix it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-3-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -1154,6 +1154,7 @@ static void build_clear_payload_id_table
req.req_type = DP_CLEAR_PAYLOAD_ID_TABLE;
drm_dp_encode_sideband_req(&req, msg);
+ msg->path_msg = true;
}
static int build_enum_path_resources(struct drm_dp_sideband_msg_tx *msg,
@@ -2824,7 +2825,8 @@ static int set_hdr_from_dst_qlock(struct
req_type = txmsg->msg[0] & 0x7f;
if (req_type == DP_CONNECTION_STATUS_NOTIFY ||
- req_type == DP_RESOURCE_STATUS_NOTIFY)
+ req_type == DP_RESOURCE_STATUS_NOTIFY ||
+ req_type == DP_CLEAR_PAYLOAD_ID_TABLE)
hdr->broadcast = 1;
else
hdr->broadcast = 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 078/677] drm: bridge: fix ANX7625 use of mipi_dsi_() functions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 077/677] drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 079/677] drm: bridge/panel: Cleanup connector on bridge detach Greg Kroah-Hartman
` (605 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Randy Dunlap,
Robert Foss, Xin Ji, Sam Ravnborg, dri-devel, Andrzej Hajda,
Neil Armstrong
From: Randy Dunlap <rdunlap@infradead.org>
commit ed01fca38717169fcb61bd45ad1c3750d9c40d59 upstream.
The Analogix DRM ANX7625 bridge driver uses mips_dsi_() function
interfaces so it should select DRM_MIPI_DSI to prevent build errors.
ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined!
ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined!
ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined!
ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined!
ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined!
Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Cc: Xin Ji <xji@analogixsemi.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210415183619.1431-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/analogix/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/bridge/analogix/Kconfig
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -30,6 +30,7 @@ config DRM_ANALOGIX_ANX7625
tristate "Analogix Anx7625 MIPI to DP interface support"
depends on DRM
depends on OF
+ select DRM_MIPI_DSI
help
ANX7625 is an ultra-low power 4K mobile HD transmitter
designed for portable devices. It converts MIPI/DPI to
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 079/677] drm: bridge/panel: Cleanup connector on bridge detach
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 078/677] drm: bridge: fix ANX7625 use of mipi_dsi_() functions Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 080/677] drm/amd/display: Reject non-zero src_y and src_x for video planes Greg Kroah-Hartman
` (604 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrzej Hajda, Neil Armstrong,
Laurent Pinchart, Jonas Karlman, Jernej Skrabec, Paul Cercueil,
Laurent Pinchart
From: Paul Cercueil <paul@crapouillou.net>
commit 4d906839d321c2efbf3fed4bc31ffd9ff55b75c0 upstream.
If we don't call drm_connector_cleanup() manually in
panel_bridge_detach(), the connector will be cleaned up with the other
DRM objects in the call to drm_mode_config_cleanup(). However, since our
drm_connector is devm-allocated, by the time drm_mode_config_cleanup()
will be called, our connector will be long gone. Therefore, the
connector must be cleaned up when the bridge is detached to avoid
use-after-free conditions.
v2: Cleanup connector only if it was created
v3: Add FIXME
v4: (Use connector->dev) directly in if() block
Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.")
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/panel.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -87,6 +87,18 @@ static int panel_bridge_attach(struct dr
static void panel_bridge_detach(struct drm_bridge *bridge)
{
+ struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+ struct drm_connector *connector = &panel_bridge->connector;
+
+ /*
+ * Cleanup the connector if we know it was initialized.
+ *
+ * FIXME: This wouldn't be needed if the panel_bridge structure was
+ * allocated with drmm_kzalloc(). This might be tricky since the
+ * drm_device pointer can only be retrieved when the bridge is attached.
+ */
+ if (connector->dev)
+ drm_connector_cleanup(connector);
}
static void panel_bridge_pre_enable(struct drm_bridge *bridge)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 080/677] drm/amd/display: Reject non-zero src_y and src_x for video planes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 079/677] drm: bridge/panel: Cleanup connector on bridge detach Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 081/677] drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 Greg Kroah-Hartman
` (603 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harry Wentland, nicholas.kazlauskas,
amd-gfx, alexander.deucher, Roman.Li, hersenxs.wu, danny.wang,
Christian König
From: Harry Wentland <harry.wentland@amd.com>
commit d89f6048bdcb6a56abb396c584747d5eeae650db upstream.
[Why]
This hasn't been well tested and leads to complete system hangs on DCN1
based systems, possibly others.
The system hang can be reproduced by gesturing the video on the YouTube
Android app on ChromeOS into full screen.
[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.
v2:
- Add code comment describing the reason we're rejecting non-zero
src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next
v3: removed trailing whitespace
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Cc: nicholas.kazlauskas@amd.com
Cc: amd-gfx@lists.freedesktop.org
Cc: alexander.deucher@amd.com
Cc: Roman.Li@amd.com
Cc: hersenxs.wu@amd.com
Cc: danny.wang@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3850,6 +3850,23 @@ static int fill_dc_scaling_info(const st
scaling_info->src_rect.x = state->src_x >> 16;
scaling_info->src_rect.y = state->src_y >> 16;
+ /*
+ * For reasons we don't (yet) fully understand a non-zero
+ * src_y coordinate into an NV12 buffer can cause a
+ * system hang. To avoid hangs (and maybe be overly cautious)
+ * let's reject both non-zero src_x and src_y.
+ *
+ * We currently know of only one use-case to reproduce a
+ * scenario with non-zero src_x and src_y for NV12, which
+ * is to gesture the YouTube Android app into full screen
+ * on ChromeOS.
+ */
+ if (state->fb &&
+ state->fb->format->format == DRM_FORMAT_NV12 &&
+ (scaling_info->src_rect.x != 0 ||
+ scaling_info->src_rect.y != 0))
+ return -EINVAL;
+
scaling_info->src_rect.width = state->src_w >> 16;
if (scaling_info->src_rect.width == 0)
return -EINVAL;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 081/677] drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 080/677] drm/amd/display: Reject non-zero src_y and src_x for video planes Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 082/677] drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC Greg Kroah-Hartman
` (602 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian König, James Zhu,
Alex Deucher
From: Christian König <christian.koenig@amd.com>
commit 20a5f5a98e1bb3d40acd97e89299e8c2d22784be upstream.
Starting with Vega the hardware supports concurrent flushes
of VMID which can be used to implement per process VMID
allocation.
But concurrent flushes are mutual exclusive with back to
back VMID allocations, fix this to avoid a VMID used in
two ways at the same time.
v2: don't set ring to NULL
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c | 19 +++++++++++--------
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 6 ++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h | 1 +
3 files changed, 18 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ids.c
@@ -215,7 +215,11 @@ static int amdgpu_vmid_grab_idle(struct
/* Check if we have an idle VMID */
i = 0;
list_for_each_entry((*idle), &id_mgr->ids_lru, list) {
- fences[i] = amdgpu_sync_peek_fence(&(*idle)->active, ring);
+ /* Don't use per engine and per process VMID at the same time */
+ struct amdgpu_ring *r = adev->vm_manager.concurrent_flush ?
+ NULL : ring;
+
+ fences[i] = amdgpu_sync_peek_fence(&(*idle)->active, r);
if (!fences[i])
break;
++i;
@@ -281,7 +285,7 @@ static int amdgpu_vmid_grab_reserved(str
if (updates && (*id)->flushed_updates &&
updates->context == (*id)->flushed_updates->context &&
!dma_fence_is_later(updates, (*id)->flushed_updates))
- updates = NULL;
+ updates = NULL;
if ((*id)->owner != vm->immediate.fence_context ||
job->vm_pd_addr != (*id)->pd_gpu_addr ||
@@ -290,6 +294,10 @@ static int amdgpu_vmid_grab_reserved(str
!dma_fence_is_signaled((*id)->last_flush))) {
struct dma_fence *tmp;
+ /* Don't use per engine and per process VMID at the same time */
+ if (adev->vm_manager.concurrent_flush)
+ ring = NULL;
+
/* to prevent one context starved by another context */
(*id)->pd_gpu_addr = 0;
tmp = amdgpu_sync_peek_fence(&(*id)->active, ring);
@@ -365,12 +373,7 @@ static int amdgpu_vmid_grab_used(struct
if (updates && (!flushed || dma_fence_is_later(updates, flushed)))
needs_flush = true;
- /* Concurrent flushes are only possible starting with Vega10 and
- * are broken on Navi10 and Navi14.
- */
- if (needs_flush && (adev->asic_type < CHIP_VEGA10 ||
- adev->asic_type == CHIP_NAVI10 ||
- adev->asic_type == CHIP_NAVI14))
+ if (needs_flush && !adev->vm_manager.concurrent_flush)
continue;
/* Good, we can use this VMID. Remember this submission as
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -3147,6 +3147,12 @@ void amdgpu_vm_manager_init(struct amdgp
{
unsigned i;
+ /* Concurrent flushes are only possible starting with Vega10 and
+ * are broken on Navi10 and Navi14.
+ */
+ adev->vm_manager.concurrent_flush = !(adev->asic_type < CHIP_VEGA10 ||
+ adev->asic_type == CHIP_NAVI10 ||
+ adev->asic_type == CHIP_NAVI14);
amdgpu_vmid_mgr_init(adev);
adev->vm_manager.fence_context =
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
@@ -331,6 +331,7 @@ struct amdgpu_vm_manager {
/* Handling of VMIDs */
struct amdgpu_vmid_mgr id_mgr[AMDGPU_MAX_VMHUBS];
unsigned int first_kfd_vmid;
+ bool concurrent_flush;
/* Handling of VM fences */
u64 fence_context;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 082/677] drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 081/677] drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 083/677] drm/amdgpu: fix r initial values Greg Kroah-Hartman
` (601 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Evan Quan, Alex Deucher
From: Evan Quan <evan.quan@amd.com>
commit c83c4e1912446db697a120eb30126cd80cbf6349 upstream.
Polaris12 32bit ASIC needs a special MC firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -59,6 +59,7 @@ MODULE_FIRMWARE("amdgpu/tonga_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris11_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris10_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris12_mc.bin");
+MODULE_FIRMWARE("amdgpu/polaris12_32_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris11_k_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris10_k_mc.bin");
MODULE_FIRMWARE("amdgpu/polaris12_k_mc.bin");
@@ -243,10 +244,16 @@ static int gmc_v8_0_init_microcode(struc
chip_name = "polaris10";
break;
case CHIP_POLARIS12:
- if (ASICID_IS_P23(adev->pdev->device, adev->pdev->revision))
+ if (ASICID_IS_P23(adev->pdev->device, adev->pdev->revision)) {
chip_name = "polaris12_k";
- else
- chip_name = "polaris12";
+ } else {
+ WREG32(mmMC_SEQ_IO_DEBUG_INDEX, ixMC_IO_DEBUG_UP_159);
+ /* Polaris12 32bit ASIC needs a special MC firmware */
+ if (RREG32(mmMC_SEQ_IO_DEBUG_DATA) == 0x05b4dc40)
+ chip_name = "polaris12_32";
+ else
+ chip_name = "polaris12";
+ }
break;
case CHIP_FIJI:
case CHIP_CARRIZO:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 083/677] drm/amdgpu: fix r initial values
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 082/677] drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 084/677] drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode Greg Kroah-Hartman
` (600 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Victor Zhao, Alex Deucher
From: Victor Zhao <Victor.Zhao@amd.com>
commit 4b12ee6f426e5e36396501a58f3a1af5b92a7e06 upstream.
Sriov gets suspend of IP block <dce_virtual> failed as return
value was not initialized.
v2: return 0 directly to align original code semantic before this
was broken out into a separate helper function instead of setting
initial values
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -1355,7 +1355,7 @@ int amdgpu_display_suspend_helper(struct
}
}
}
- return r;
+ return 0;
}
int amdgpu_display_resume_helper(struct amdgpu_device *adev)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 084/677] drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 083/677] drm/amdgpu: fix r initial values Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 085/677] ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries Greg Kroah-Hartman
` (599 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bas Nieuwenhuizen, Alex Deucher
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
commit 8bf073ca9235fe38d7b74a0b4e779cfa7cc70fc9 upstream.
Otherwise tiling modes that require the values form this field
(In particular _*_X) would be corrupted upon video decode.
Copied from the VCN v2 code.
Fixes: 99541f392b4d ("drm/amdgpu: add mc resume DPG mode for VCN3.0")
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -584,6 +584,10 @@ static void vcn_v3_0_mc_resume_dpg_mode(
WREG32_SOC15_DPG_MODE(inst_idx, SOC15_DPG_MODE_OFFSET(
VCN, inst_idx, mmUVD_VCPU_NONCACHE_SIZE0),
AMDGPU_GPU_PAGE_ALIGN(sizeof(struct amdgpu_fw_shared)), 0, indirect);
+
+ /* VCN global tiling registers */
+ WREG32_SOC15_DPG_MODE(0, SOC15_DPG_MODE_OFFSET(
+ UVD, 0, mmUVD_GFX10_ADDR_CONFIG), adev->gfx.config.gb_addr_config, 0, indirect);
}
static void vcn_v3_0_disable_static_power_gating(struct amdgpu_device *adev, int inst)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 085/677] ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 084/677] drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 086/677] ALSA: hda/realtek: Re-order ALC882 Sony " Greg Kroah-Hartman
` (598 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit b265047ac56bad8c4f3d0c8bf9cb4e828ee0d28e upstream.
Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2470,13 +2470,13 @@ static const struct snd_pci_quirk alc882
ALC882_FIXUP_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
ALC882_FIXUP_ACER_ASPIRE_8930G),
+ SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
+ ALC882_FIXUP_ACER_ASPIRE_4930G),
+ SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
- SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
- ALC882_FIXUP_ACER_ASPIRE_4930G),
- SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
SND_PCI_QUIRK(0x1025, 0x021e, "Acer Aspire 5739G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 086/677] ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 085/677] ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 087/677] ALSA: hda/realtek: Re-order ALC882 Clevo " Greg Kroah-Hartman
` (597 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit b7529c18feecb1af92f9db08c8e7fe446a82d96d upstream.
Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2489,11 +2489,11 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
+ SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
+ SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9060, "Sony Vaio VPCL14M1R", ALC882_FIXUP_NO_PRIMARY_HP),
- SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
- SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
/* All Apple entries are in codec SSIDs */
SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC889_FIXUP_MBP_VREF),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 087/677] ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 086/677] ALSA: hda/realtek: Re-order ALC882 Sony " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 088/677] ALSA: hda/realtek: Re-order ALC269 HP " Greg Kroah-Hartman
` (596 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 13e1a4cd490b959a4c72c9f4fb502ef56b190062 upstream.
Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also, user lower hex letters in the entry.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2536,9 +2536,19 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
+ SND_PCI_QUIRK(0x1558, 0x50d3, "Clevo PC50[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x65d1, "Clevo PB51[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x65d2, "Clevo PB51R[CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x65e1, "Clevo PB51[ED][DF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x65e5, "Clevo PC50D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+ SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x9506, "Clevo P955HQ", ALC1220_FIXUP_CLEVO_P950),
- SND_PCI_QUIRK(0x1558, 0x950A, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950),
+ SND_PCI_QUIRK(0x1558, 0x950a, "Clevo P955H[PR]", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x95e1, "Clevo P95xER", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x95e2, "Clevo P950ER", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x95e3, "Clevo P955[ER]T", ALC1220_FIXUP_CLEVO_P950),
@@ -2548,16 +2558,6 @@ static const struct snd_pci_quirk alc882
SND_PCI_QUIRK(0x1558, 0x96e1, "Clevo P960[ER][CDFN]-K", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x97e1, "Clevo P970[ER][CDFN]", ALC1220_FIXUP_CLEVO_P950),
SND_PCI_QUIRK(0x1558, 0x97e2, "Clevo P970RC-M", ALC1220_FIXUP_CLEVO_P950),
- SND_PCI_QUIRK(0x1558, 0x50d3, "Clevo PC50[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x65d1, "Clevo PB51[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x65d2, "Clevo PB51R[CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x65e1, "Clevo PB51[ED][DF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x65e5, "Clevo PC50D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
- SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 088/677] ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 087/677] ALSA: hda/realtek: Re-order ALC882 Clevo " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 089/677] ALSA: hda/realtek: Re-order ALC269 Acer " Greg Kroah-Hartman
` (595 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 45461e3b554c75ddff9703539f3711cc3dfb0422 upstream.
Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way. So now we simply keep
the PCI SSID order for the whole.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 44 ++++++++++++++++++++----------------------
1 file changed, 21 insertions(+), 23 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8031,35 +8031,18 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
SND_PCI_QUIRK(0x103c, 0x18e6, "HP", ALC269_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x218b, "HP", ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED),
- SND_PCI_QUIRK(0x103c, 0x225f, "HP", ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY),
- /* ALC282 */
SND_PCI_QUIRK(0x103c, 0x21f9, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2210, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2214, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x221c, "HP EliteBook 755 G2", ALC280_FIXUP_HP_HEADSET_MIC),
+ SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2236, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2237, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2238, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2239, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x224b, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2268, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x226a, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x226b, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x226e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x2271, "HP", ALC286_FIXUP_HP_GPIO_LED),
- SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC280_FIXUP_HP_DOCK_PINS),
- SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC280_FIXUP_HP_DOCK_PINS),
- SND_PCI_QUIRK(0x103c, 0x229e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22b2, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22b7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22bf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22db, "HP", ALC280_FIXUP_HP_9480M),
- SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- /* ALC290 */
- SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
@@ -8067,26 +8050,41 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x225f, "HP", ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY),
SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2263, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2264, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x2268, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x226a, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x226b, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x226e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x2271, "HP", ALC286_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC280_FIXUP_HP_DOCK_PINS),
SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC280_FIXUP_HP_DOCK_PINS),
SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x228b, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x228e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x229e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22b2, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22b7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22bf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22c4, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22c5, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22c7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22c8, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x22c4, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+ SND_PCI_QUIRK(0x103c, 0x22db, "HP", ALC280_FIXUP_HP_9480M),
+ SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+ SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2334, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2335, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
- SND_PCI_QUIRK(0x103c, 0x221c, "HP EliteBook 755 G2", ALC280_FIXUP_HP_HEADSET_MIC),
SND_PCI_QUIRK(0x103c, 0x802e, "HP Z240 SFF", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x802f, "HP Z240", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x8077, "HP", ALC256_FIXUP_HP_HEADSET_MIC),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 089/677] ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 088/677] ALSA: hda/realtek: Re-order ALC269 HP " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 090/677] ALSA: hda/realtek: Re-order ALC269 Dell " Greg Kroah-Hartman
` (594 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 433f894ec7fbd3b4bf1f3187b2ddd566078c4aef upstream.
Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7947,12 +7947,12 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1025, 0x0349, "Acer AOD260", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x047c, "Acer AC700", ALC269_FIXUP_ACER_AC700),
SND_PCI_QUIRK(0x1025, 0x072d, "Acer Aspire V5-571G", ALC269_FIXUP_ASPIRE_HEADSET_MIC),
- SND_PCI_QUIRK(0x1025, 0x080d, "Acer Aspire V5-122P", ALC269_FIXUP_ASPIRE_HEADSET_MIC),
SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK),
SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK),
SND_PCI_QUIRK(0x1025, 0x0762, "Acer Aspire E1-472", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
+ SND_PCI_QUIRK(0x1025, 0x080d, "Acer Aspire V5-122P", ALC269_FIXUP_ASPIRE_HEADSET_MIC),
SND_PCI_QUIRK(0x1025, 0x0840, "Acer Aspire E1", ALC269VB_FIXUP_ASPIRE_E1_COEF),
SND_PCI_QUIRK(0x1025, 0x101c, "Acer Veriton N2510G", ALC269_FIXUP_LIFEBOOK),
SND_PCI_QUIRK(0x1025, 0x102b, "Acer Aspire C24-860", ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 090/677] ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 089/677] ALSA: hda/realtek: Re-order ALC269 Acer " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 091/677] ALSA: hda/realtek: Re-order ALC269 ASUS " Greg Kroah-Hartman
` (593 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit aa143ad39a52d968ac69e426d329bb74f270e6ca upstream.
Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8008,8 +8008,8 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1028, 0x0738, "Dell Precision 5820", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x1028, 0x075c, "Dell XPS 27 7760", ALC298_FIXUP_SPK_VOLUME),
SND_PCI_QUIRK(0x1028, 0x075d, "Dell AIO", ALC298_FIXUP_SPK_VOLUME),
- SND_PCI_QUIRK(0x1028, 0x07b0, "Dell Precision 7520", ALC295_FIXUP_DISABLE_DAC3),
SND_PCI_QUIRK(0x1028, 0x0798, "Dell Inspiron 17 7000 Gaming", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
+ SND_PCI_QUIRK(0x1028, 0x07b0, "Dell Precision 7520", ALC295_FIXUP_DISABLE_DAC3),
SND_PCI_QUIRK(0x1028, 0x080c, "Dell WYSE", ALC225_FIXUP_DELL_WYSE_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
@@ -8019,8 +8019,8 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1028, 0x08ad, "Dell WYSE AIO", ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x08ae, "Dell WYSE NB", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
- SND_PCI_QUIRK(0x1028, 0x097e, "Dell Precision", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x097d, "Dell Precision", ALC289_FIXUP_DUAL_SPK),
+ SND_PCI_QUIRK(0x1028, 0x097e, "Dell Precision", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x098d, "Dell Precision", ALC233_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x09bf, "Dell Precision", ALC233_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0a2e, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 091/677] ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 090/677] ALSA: hda/realtek: Re-order ALC269 Dell " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 092/677] ALSA: hda/realtek: Re-order ALC269 Sony " Greg Kroah-Hartman
` (592 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 3cd0ed636dd19e7fbe3ebe8de8476e1718d5a8f1 upstream.
Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8126,16 +8126,18 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x10d0, "ASUS X540LA/X540LJ", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x115d, "Asus 1015E", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x1043, 0x11c0, "ASUS X556UR", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1043, 0x125e, "ASUS Q524UQK", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x1271, "ASUS X430UN", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x1290, "ASUS X441SA", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x12a0, "ASUS X441UV", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE),
- SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC),
+ SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
+ SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE),
@@ -8148,13 +8150,11 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
- SND_PCI_QUIRK(0x1043, 0x125e, "ASUS Q524UQK", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502),
SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
- SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 092/677] ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 091/677] ALSA: hda/realtek: Re-order ALC269 ASUS " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 093/677] ALSA: hda/realtek: Re-order ALC269 Lenovo " Greg Kroah-Hartman
` (591 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit cab561f8d4bc9b196ae20c960aa5da89fd786ab5 upstream.
Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8161,12 +8161,12 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101),
- SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
- SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", ALC275_FIXUP_SONY_DISABLE_AAMIX),
+ SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK),
SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT),
SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 093/677] ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 092/677] ALSA: hda/realtek: Re-order ALC269 Sony " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 094/677] ALSA: hda/realtek: Re-order remaining ALC269 " Greg Kroah-Hartman
` (590 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit f552ff54c2a700616a02b038e4bf3cbf859f65b7 upstream.
Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8241,9 +8241,9 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
+ SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST),
SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2208, "Thinkpad T431s", ALC269_FIXUP_LENOVO_DOCK),
@@ -8287,6 +8287,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
+ SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x501a, "Thinkpad", ALC283_FIXUP_INT_MIC),
SND_PCI_QUIRK(0x17aa, 0x501e, "Thinkpad L440", ALC292_FIXUP_TPT440_DOCK),
@@ -8305,7 +8306,6 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x511e, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS),
SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 094/677] ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 093/677] ALSA: hda/realtek: Re-order ALC269 Lenovo " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 095/677] ALSA: hda/realtek: Re-order ALC662 " Greg Kroah-Hartman
` (589 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit c656f747df151a0a89756a5312f4ca2116758ba4 upstream.
Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8170,10 +8170,11 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK),
SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT),
SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN),
- SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN),
SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC),
+ SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN),
SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC),
SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE),
+ SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE),
SND_PCI_QUIRK(0x10ec, 0x1230, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK(0x10ec, 0x1252, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK(0x10ec, 0x1254, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
@@ -8183,9 +8184,9 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
- SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
@@ -8312,13 +8313,12 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI),
SND_PCI_QUIRK(0x1b35, 0x1237, "CZC L101", ALC269_FIXUP_CZC_L101),
SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */
+ SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802),
+ SND_PCI_QUIRK(0x1c06, 0x2015, "Lemote A190X", ALC269_FIXUP_LEMOTE_A190X),
SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),
SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
- SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE),
- SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802),
- SND_PCI_QUIRK(0x1c06, 0x2015, "Lemote A190X", ALC269_FIXUP_LEMOTE_A190X),
SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),
SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 095/677] ALSA: hda/realtek: Re-order ALC662 quirk table entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 094/677] ALSA: hda/realtek: Re-order remaining ALC269 " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 096/677] ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices Greg Kroah-Hartman
` (588 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 9edeb1109d05953b2f0e24e5b2341a98c3fa78d5 upstream.
Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10060,6 +10060,7 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x1025, 0x0349, "eMachines eM250", ALC662_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x034a, "Gateway LT27", ALC662_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
+ SND_PCI_QUIRK(0x1025, 0x0566, "Acer Aspire Ethos 8951G", ALC669_FIXUP_ACER_ASPIRE_ETHOS),
SND_PCI_QUIRK(0x1025, 0x123c, "Acer Nitro N50-600", ALC662_FIXUP_ACER_NITRO_HEADSET_MODE),
SND_PCI_QUIRK(0x1025, 0x124e, "Acer 2660G", ALC662_FIXUP_ACER_X2660G_HEADSET_MODE),
SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
@@ -10076,9 +10077,9 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2),
SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_ASUS_Nx50),
- SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX", ALC662_FIXUP_BASS_1A),
SND_PCI_QUIRK(0x1043, 0x129d, "Asus N750", ALC662_FIXUP_ASUS_Nx50),
SND_PCI_QUIRK(0x1043, 0x12ff, "ASUS G751", ALC668_FIXUP_ASUS_G751),
+ SND_PCI_QUIRK(0x1043, 0x13df, "Asus N550JX", ALC662_FIXUP_BASS_1A),
SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51),
@@ -10098,7 +10099,6 @@ static const struct snd_pci_quirk alc662
SND_PCI_QUIRK(0x1b0a, 0x01b8, "ACER Veriton", ALC662_FIXUP_ACER_VERITON),
SND_PCI_QUIRK(0x1b35, 0x1234, "CZC ET26", ALC662_FIXUP_CZC_ET26),
SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
- SND_PCI_QUIRK(0x1025, 0x0566, "Acer Aspire Ethos 8951G", ALC669_FIXUP_ACER_ASPIRE_ETHOS),
#if 0
/* Below is a quirk table taken from the old code.
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 096/677] ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 095/677] ALSA: hda/realtek: Re-order ALC662 " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 097/677] ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable Greg Kroah-Hartman
` (587 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit defce244b01ee12534910a4544e11be5eb927d25 upstream.
The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all. That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.
Let's unify them with the single vendor-quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9264,8 +9264,7 @@ static const struct snd_pci_quirk alc861
SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
- SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", ALC861_FIXUP_AMP_VREF_0F),
- SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", ALC861_FIXUP_AMP_VREF_0F),
+ SND_PCI_QUIRK_VENDOR(0x1584, "Haier/Uniwill", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", ALC861_FIXUP_FSC_AMILO_PI1505),
{}
};
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 097/677] ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 096/677] ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 098/677] ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32 Greg Kroah-Hartman
` (586 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sami Loone, Takashi Iwai
From: Sami Loone <sami@loone.fi>
commit 266fd994b2b0ab7ba3e5541868838ce30775964b upstream.
In 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo
laptops") an existing Lenovo quirk was made more generic by removing a
0x12 pin requirement from the entry. This made the second chance table
Thinkpad jack entry unreachable as the pin configurations became
identical.
Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk
back to the primary pin table as they can co-exist when more specific
configurations come first.
Add a more targeted pin quirk for Lenovo devices that have 0x12 as
0x40000000.
Tested on Yoga 6 (AMD) laptop.
[ Corrected the commit ID -- tiwai ]
Fixes: 9bbb94e57df1 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yoga
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8775,6 +8775,16 @@ static const struct snd_hda_pin_quirk al
{0x19, 0x03a11020},
{0x21, 0x0321101f}),
SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE,
+ {0x12, 0x90a60130},
+ {0x14, 0x90170110},
+ {0x19, 0x04a11040},
+ {0x21, 0x04211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE,
+ {0x14, 0x90170110},
+ {0x19, 0x04a11040},
+ {0x1d, 0x40600001},
+ {0x21, 0x04211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
{0x14, 0x90170110},
{0x19, 0x04a11040},
{0x21, 0x04211020}),
@@ -8945,10 +8955,6 @@ static const struct snd_hda_pin_quirk al
SND_HDA_PIN_QUIRK(0x10ec0274, 0x1028, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB,
{0x19, 0x40000000},
{0x1a, 0x40000000}),
- SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
- {0x14, 0x90170110},
- {0x19, 0x04a11040},
- {0x21, 0x04211020}),
{}
};
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 098/677] ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 097/677] ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 099/677] KVM: s390: VSIE: correctly handle MVPG when in VSIE Greg Kroah-Hartman
` (585 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
From: Takashi Iwai <tiwai@suse.de>
commit 622464c893142f7beac89f5ba8c9773bca5e5004 upstream.
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04. However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.
This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism. Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off. This should be good enough for the
purpose, and was actually confirmed to work fine.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4331,6 +4331,35 @@ static void alc245_fixup_hp_x360_amp(str
}
}
+/* toggle GPIO2 at each time stream is started; we use PREPARE state instead */
+static void alc274_hp_envy_pcm_hook(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream,
+ int action)
+{
+ switch (action) {
+ case HDA_GEN_PCM_ACT_PREPARE:
+ alc_update_gpio_data(codec, 0x04, true);
+ break;
+ case HDA_GEN_PCM_ACT_CLEANUP:
+ alc_update_gpio_data(codec, 0x04, false);
+ break;
+ }
+}
+
+static void alc274_fixup_hp_envy_gpio(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PROBE) {
+ spec->gpio_mask |= 0x04;
+ spec->gpio_dir |= 0x04;
+ spec->gen.pcm_playback_hook = alc274_hp_envy_pcm_hook;
+ }
+}
+
static void alc_update_coef_led(struct hda_codec *codec,
struct alc_coef_led *led,
bool polarity, bool on)
@@ -6443,6 +6472,7 @@ enum {
ALC255_FIXUP_XIAOMI_HEADSET_MIC,
ALC274_FIXUP_HP_MIC,
ALC274_FIXUP_HP_HEADSET_MIC,
+ ALC274_FIXUP_HP_ENVY_GPIO,
ALC256_FIXUP_ASUS_HPE,
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
ALC287_FIXUP_HP_GPIO_LED,
@@ -7882,6 +7912,10 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC274_FIXUP_HP_MIC
},
+ [ALC274_FIXUP_HP_ENVY_GPIO] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc274_fixup_hp_envy_gpio,
+ },
[ALC256_FIXUP_ASUS_HPE] = {
.type = HDA_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
@@ -8099,6 +8133,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
+ SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8730, "HP ProBook 445 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 099/677] KVM: s390: VSIE: correctly handle MVPG when in VSIE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 098/677] ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32 Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 100/677] KVM: s390: split kvm_s390_logical_to_effective Greg Kroah-Hartman
` (584 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudio Imbrenda, Janosch Frank,
David Hildenbrand, Christian Borntraeger
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
commit bdf7509bbefa20855d5f6bacdc5b62a8489477c9 upstream.
Correctly handle the MVPG instruction when issued by a VSIE guest.
Fixes: a3508fbe9dc6d ("KVM: s390: vsie: initial support for nested virtualization")
Cc: stable@vger.kernel.org # f85f1baaa189: KVM: s390: split kvm_s390_logical_to_effective
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210302174443.514363-4-imbrenda@linux.ibm.com
[borntraeger@de.ibm.com: apply fixup from Claudio]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/vsie.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 93 insertions(+), 5 deletions(-)
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -417,11 +417,6 @@ static void unshadow_scb(struct kvm_vcpu
memcpy((void *)((u64)scb_o + 0xc0),
(void *)((u64)scb_s + 0xc0), 0xf0 - 0xc0);
break;
- case ICPT_PARTEXEC:
- /* MVPG only */
- memcpy((void *)((u64)scb_o + 0xc0),
- (void *)((u64)scb_s + 0xc0), 0xd0 - 0xc0);
- break;
}
if (scb_s->ihcpu != 0xffffU)
@@ -984,6 +979,95 @@ static int handle_stfle(struct kvm_vcpu
}
/*
+ * Get a register for a nested guest.
+ * @vcpu the vcpu of the guest
+ * @vsie_page the vsie_page for the nested guest
+ * @reg the register number, the upper 4 bits are ignored.
+ * returns: the value of the register.
+ */
+static u64 vsie_get_register(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page, u8 reg)
+{
+ /* no need to validate the parameter and/or perform error handling */
+ reg &= 0xf;
+ switch (reg) {
+ case 15:
+ return vsie_page->scb_s.gg15;
+ case 14:
+ return vsie_page->scb_s.gg14;
+ default:
+ return vcpu->run->s.regs.gprs[reg];
+ }
+}
+
+static int vsie_handle_mvpg(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
+{
+ struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
+ unsigned long pei_dest, pei_src, src, dest, mask;
+ u64 *pei_block = &vsie_page->scb_o->mcic;
+ int edat, rc_dest, rc_src;
+ union ctlreg0 cr0;
+
+ cr0.val = vcpu->arch.sie_block->gcr[0];
+ edat = cr0.edat && test_kvm_facility(vcpu->kvm, 8);
+ mask = _kvm_s390_logical_to_effective(&scb_s->gpsw, PAGE_MASK);
+
+ dest = vsie_get_register(vcpu, vsie_page, scb_s->ipb >> 20) & mask;
+ src = vsie_get_register(vcpu, vsie_page, scb_s->ipb >> 16) & mask;
+
+ rc_dest = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, dest, &pei_dest);
+ rc_src = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, src, &pei_src);
+ /*
+ * Either everything went well, or something non-critical went wrong
+ * e.g. because of a race. In either case, simply retry.
+ */
+ if (rc_dest == -EAGAIN || rc_src == -EAGAIN || (!rc_dest && !rc_src)) {
+ retry_vsie_icpt(vsie_page);
+ return -EAGAIN;
+ }
+ /* Something more serious went wrong, propagate the error */
+ if (rc_dest < 0)
+ return rc_dest;
+ if (rc_src < 0)
+ return rc_src;
+
+ /* The only possible suppressing exception: just deliver it */
+ if (rc_dest == PGM_TRANSLATION_SPEC || rc_src == PGM_TRANSLATION_SPEC) {
+ clear_vsie_icpt(vsie_page);
+ rc_dest = kvm_s390_inject_program_int(vcpu, PGM_TRANSLATION_SPEC);
+ WARN_ON_ONCE(rc_dest);
+ return 1;
+ }
+
+ /*
+ * Forward the PEI intercept to the guest if it was a page fault, or
+ * also for segment and region table faults if EDAT applies.
+ */
+ if (edat) {
+ rc_dest = rc_dest == PGM_ASCE_TYPE ? rc_dest : 0;
+ rc_src = rc_src == PGM_ASCE_TYPE ? rc_src : 0;
+ } else {
+ rc_dest = rc_dest != PGM_PAGE_TRANSLATION ? rc_dest : 0;
+ rc_src = rc_src != PGM_PAGE_TRANSLATION ? rc_src : 0;
+ }
+ if (!rc_dest && !rc_src) {
+ pei_block[0] = pei_dest;
+ pei_block[1] = pei_src;
+ return 1;
+ }
+
+ retry_vsie_icpt(vsie_page);
+
+ /*
+ * The host has edat, and the guest does not, or it was an ASCE type
+ * exception. The host needs to inject the appropriate DAT interrupts
+ * into the guest.
+ */
+ if (rc_dest)
+ return inject_fault(vcpu, rc_dest, dest, 1);
+ return inject_fault(vcpu, rc_src, src, 0);
+}
+
+/*
* Run the vsie on a shadow scb and a shadow gmap, without any further
* sanity checks, handling SIE faults.
*
@@ -1071,6 +1155,10 @@ static int do_vsie_run(struct kvm_vcpu *
if ((scb_s->ipa & 0xf000) != 0xf000)
scb_s->ipa += 0x1000;
break;
+ case ICPT_PARTEXEC:
+ if (scb_s->ipa == 0xb254)
+ rc = vsie_handle_mvpg(vcpu, vsie_page);
+ break;
}
return rc;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 100/677] KVM: s390: split kvm_s390_logical_to_effective
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 099/677] KVM: s390: VSIE: correctly handle MVPG when in VSIE Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 101/677] KVM: s390: fix guarded storage control register handling Greg Kroah-Hartman
` (583 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudio Imbrenda, Christian Borntraeger
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
commit f85f1baaa18932a041fd2b1c2ca6cfd9898c7d2b upstream.
Split kvm_s390_logical_to_effective to a generic function called
_kvm_s390_logical_to_effective. The new function takes a PSW and an address
and returns the address with the appropriate bits masked off. The old
function now calls the new function with the appropriate PSW from the vCPU.
This is needed to avoid code duplication for vSIE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # for VSIE: correctly handle MVPG when in VSIE
Link: https://lore.kernel.org/r/20210302174443.514363-2-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/gaccess.h | 31 ++++++++++++++++++++++++-------
1 file changed, 24 insertions(+), 7 deletions(-)
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -37,6 +37,29 @@ static inline unsigned long kvm_s390_rea
}
/**
+ * _kvm_s390_logical_to_effective - convert guest logical to effective address
+ * @psw: psw of the guest
+ * @ga: guest logical address
+ *
+ * Convert a guest logical address to an effective address by applying the
+ * rules of the addressing mode defined by bits 31 and 32 of the given PSW
+ * (extendended/basic addressing mode).
+ *
+ * Depending on the addressing mode, the upper 40 bits (24 bit addressing
+ * mode), 33 bits (31 bit addressing mode) or no bits (64 bit addressing
+ * mode) of @ga will be zeroed and the remaining bits will be returned.
+ */
+static inline unsigned long _kvm_s390_logical_to_effective(psw_t *psw,
+ unsigned long ga)
+{
+ if (psw_bits(*psw).eaba == PSW_BITS_AMODE_64BIT)
+ return ga;
+ if (psw_bits(*psw).eaba == PSW_BITS_AMODE_31BIT)
+ return ga & ((1UL << 31) - 1);
+ return ga & ((1UL << 24) - 1);
+}
+
+/**
* kvm_s390_logical_to_effective - convert guest logical to effective address
* @vcpu: guest virtual cpu
* @ga: guest logical address
@@ -52,13 +75,7 @@ static inline unsigned long kvm_s390_rea
static inline unsigned long kvm_s390_logical_to_effective(struct kvm_vcpu *vcpu,
unsigned long ga)
{
- psw_t *psw = &vcpu->arch.sie_block->gpsw;
-
- if (psw_bits(*psw).eaba == PSW_BITS_AMODE_64BIT)
- return ga;
- if (psw_bits(*psw).eaba == PSW_BITS_AMODE_31BIT)
- return ga & ((1UL << 31) - 1);
- return ga & ((1UL << 24) - 1);
+ return _kvm_s390_logical_to_effective(&vcpu->arch.sie_block->gpsw, ga);
}
/*
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 101/677] KVM: s390: fix guarded storage control register handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 100/677] KVM: s390: split kvm_s390_logical_to_effective Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 102/677] s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility Greg Kroah-Hartman
` (582 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Heiko Carstens,
Christian Borntraeger, David Hildenbrand, Janosch Frank,
Cornelia Huck
From: Heiko Carstens <hca@linux.ibm.com>
commit 44bada28219031f9e8e86b84460606efa57b871e upstream.
store_regs_fmt2() has an ordering problem: first the guarded storage
facility is enabled on the local cpu, then preemption disabled, and
then the STGSC (store guarded storage controls) instruction is
executed.
If the process gets scheduled away between enabling the guarded
storage facility and before preemption is disabled, this might lead to
a special operation exception and therefore kernel crash as soon as
the process is scheduled back and the STGSC instruction is executed.
Fixes: 4e0b1ab72b8a ("KVM: s390: gs support for kvm guests")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: <stable@vger.kernel.org> # 4.12
Link: https://lore.kernel.org/r/20210415080127.1061275-1-hca@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/kvm-s390.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -4307,16 +4307,16 @@ static void store_regs_fmt2(struct kvm_v
kvm_run->s.regs.bpbc = (vcpu->arch.sie_block->fpf & FPF_BPBC) == FPF_BPBC;
kvm_run->s.regs.diag318 = vcpu->arch.diag318_info.val;
if (MACHINE_HAS_GS) {
+ preempt_disable();
__ctl_set_bit(2, 4);
if (vcpu->arch.gs_enabled)
save_gs_cb(current->thread.gs_cb);
- preempt_disable();
current->thread.gs_cb = vcpu->arch.host_gscb;
restore_gs_cb(vcpu->arch.host_gscb);
- preempt_enable();
if (!vcpu->arch.host_gscb)
__ctl_clear_bit(2, 4);
vcpu->arch.host_gscb = NULL;
+ preempt_enable();
}
/* SIE will save etoken directly into SDNX and therefore kvm_run */
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 102/677] s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 101/677] KVM: s390: fix guarded storage control register handling Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 103/677] KVM: s390: VSIE: fix MVPG handling for prefixing and MSO Greg Kroah-Hartman
` (581 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vasily Gorbik, David Hildenbrand,
Christian Borntraeger, Cornelia Huck, Janosch Frank,
Heiko Carstens
From: David Hildenbrand <david@redhat.com>
commit b208108638c4bd3215792415944467c36f5dfd97 upstream.
The PoP documents:
134: The vector packed decimal facility is installed in the
z/Architecture architectural mode. When bit 134 is
one, bit 129 is also one.
135: The vector enhancements facility 1 is installed in
the z/Architecture architectural mode. When bit 135
is one, bit 129 is also one.
Looks like we confuse the vector enhancements facility 1 ("EXT") with the
Vector packed decimal facility ("BCD"). Let's fix the facility checks.
Detected while working on QEMU/tcg z14 support and only unlocking
the vector enhancements facility 1, but not the vector packed decimal
facility.
Fixes: 2583b848cad0 ("s390: report new vector facilities")
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20210503121244.25232-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/setup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -937,9 +937,9 @@ static int __init setup_hwcaps(void)
if (MACHINE_HAS_VX) {
elf_hwcap |= HWCAP_S390_VXRS;
if (test_facility(134))
- elf_hwcap |= HWCAP_S390_VXRS_EXT;
- if (test_facility(135))
elf_hwcap |= HWCAP_S390_VXRS_BCD;
+ if (test_facility(135))
+ elf_hwcap |= HWCAP_S390_VXRS_EXT;
if (test_facility(148))
elf_hwcap |= HWCAP_S390_VXRS_EXT2;
if (test_facility(152))
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 103/677] KVM: s390: VSIE: fix MVPG handling for prefixing and MSO
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 102/677] s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 104/677] KVM: s390: split kvm_s390_real_to_abs Greg Kroah-Hartman
` (580 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Janosch Frank, Claudio Imbrenda,
David Hildenbrand, Christian Borntraeger
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
commit c3171e94cc1cdcc3229565244112e869f052b8d9 upstream.
Prefixing needs to be applied to the guest real address to translate it
into a guest absolute address.
The value of MSO needs to be added to a guest-absolute address in order to
obtain the host-virtual.
Fixes: bdf7509bbefa ("s390/kvm: VSIE: correctly handle MVPG when in VSIE")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210322140559.500716-3-imbrenda@linux.ibm.com
[borntraeger@de.ibm.com simplify mso]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/vsie.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -1002,7 +1002,7 @@ static u64 vsie_get_register(struct kvm_
static int vsie_handle_mvpg(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
{
struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
- unsigned long pei_dest, pei_src, src, dest, mask;
+ unsigned long pei_dest, pei_src, src, dest, mask, prefix;
u64 *pei_block = &vsie_page->scb_o->mcic;
int edat, rc_dest, rc_src;
union ctlreg0 cr0;
@@ -1010,9 +1010,12 @@ static int vsie_handle_mvpg(struct kvm_v
cr0.val = vcpu->arch.sie_block->gcr[0];
edat = cr0.edat && test_kvm_facility(vcpu->kvm, 8);
mask = _kvm_s390_logical_to_effective(&scb_s->gpsw, PAGE_MASK);
+ prefix = scb_s->prefix << GUEST_PREFIX_SHIFT;
dest = vsie_get_register(vcpu, vsie_page, scb_s->ipb >> 20) & mask;
+ dest = _kvm_s390_real_to_abs(prefix, dest) + scb_s->mso;
src = vsie_get_register(vcpu, vsie_page, scb_s->ipb >> 16) & mask;
+ src = _kvm_s390_real_to_abs(prefix, src) + scb_s->mso;
rc_dest = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, dest, &pei_dest);
rc_src = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, src, &pei_src);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 104/677] KVM: s390: split kvm_s390_real_to_abs
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 103/677] KVM: s390: VSIE: fix MVPG handling for prefixing and MSO Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 105/677] KVM: s390: extend kvm_s390_shadow_fault to return entry pointer Greg Kroah-Hartman
` (579 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudio Imbrenda, David Hildenbrand,
Thomas Huth, Christian Borntraeger
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
commit c5d1f6b531e68888cbe6718b3f77a60115d58b9c upstream.
A new function _kvm_s390_real_to_abs will apply prefixing to a real address
with a given prefix value.
The old kvm_s390_real_to_abs becomes now a wrapper around the new function.
This is needed to avoid code duplication in vSIE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210322140559.500716-2-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/gaccess.h | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,17 +18,14 @@
/**
* kvm_s390_real_to_abs - convert guest real address to guest absolute address
- * @vcpu - guest virtual cpu
+ * @prefix - guest prefix
* @gra - guest real address
*
* Returns the guest absolute address that corresponds to the passed guest real
- * address @gra of a virtual guest cpu by applying its prefix.
+ * address @gra of by applying the given prefix.
*/
-static inline unsigned long kvm_s390_real_to_abs(struct kvm_vcpu *vcpu,
- unsigned long gra)
+static inline unsigned long _kvm_s390_real_to_abs(u32 prefix, unsigned long gra)
{
- unsigned long prefix = kvm_s390_get_prefix(vcpu);
-
if (gra < 2 * PAGE_SIZE)
gra += prefix;
else if (gra >= prefix && gra < prefix + 2 * PAGE_SIZE)
@@ -37,6 +34,20 @@ static inline unsigned long kvm_s390_rea
}
/**
+ * kvm_s390_real_to_abs - convert guest real address to guest absolute address
+ * @vcpu - guest virtual cpu
+ * @gra - guest real address
+ *
+ * Returns the guest absolute address that corresponds to the passed guest real
+ * address @gra of a virtual guest cpu by applying its prefix.
+ */
+static inline unsigned long kvm_s390_real_to_abs(struct kvm_vcpu *vcpu,
+ unsigned long gra)
+{
+ return _kvm_s390_real_to_abs(kvm_s390_get_prefix(vcpu), gra);
+}
+
+/**
* _kvm_s390_logical_to_effective - convert guest logical to effective address
* @psw: psw of the guest
* @ga: guest logical address
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 105/677] KVM: s390: extend kvm_s390_shadow_fault to return entry pointer
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 104/677] KVM: s390: split kvm_s390_real_to_abs Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 106/677] KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit Greg Kroah-Hartman
` (578 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claudio Imbrenda, Janosch Frank,
David Hildenbrand, Christian Borntraeger
From: Claudio Imbrenda <imbrenda@linux.ibm.com>
commit 5ac14bac08ae827b619f21bcceaaac3b8c497e31 upstream.
Extend kvm_s390_shadow_fault to return the pointer to the valid leaf
DAT table entry, or to the invalid entry.
Also return some flags in the lower bits of the address:
PEI_DAT_PROT: indicates that DAT protection applies because of the
protection bit in the segment (or, if EDAT, region) tables.
PEI_NOT_PTE: indicates that the address of the DAT table entry returned
does not refer to a PTE, but to a segment or region table.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210302174443.514363-3-imbrenda@linux.ibm.com
[borntraeger@de.ibm.com: fold in a fix from Claudio]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/gaccess.c | 30 +++++++++++++++++++++++++-----
arch/s390/kvm/gaccess.h | 6 +++++-
arch/s390/kvm/vsie.c | 8 ++++----
3 files changed, 34 insertions(+), 10 deletions(-)
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -976,7 +976,9 @@ int kvm_s390_check_low_addr_prot_real(st
* kvm_s390_shadow_tables - walk the guest page table and create shadow tables
* @sg: pointer to the shadow guest address space structure
* @saddr: faulting address in the shadow gmap
- * @pgt: pointer to the page table address result
+ * @pgt: pointer to the beginning of the page table for the given address if
+ * successful (return value 0), or to the first invalid DAT entry in
+ * case of exceptions (return value > 0)
* @fake: pgt references contiguous guest memory block, not a pgtable
*/
static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr,
@@ -1034,6 +1036,7 @@ static int kvm_s390_shadow_tables(struct
rfte.val = ptr;
goto shadow_r2t;
}
+ *pgt = ptr + vaddr.rfx * 8;
rc = gmap_read_table(parent, ptr + vaddr.rfx * 8, &rfte.val);
if (rc)
return rc;
@@ -1060,6 +1063,7 @@ shadow_r2t:
rste.val = ptr;
goto shadow_r3t;
}
+ *pgt = ptr + vaddr.rsx * 8;
rc = gmap_read_table(parent, ptr + vaddr.rsx * 8, &rste.val);
if (rc)
return rc;
@@ -1087,6 +1091,7 @@ shadow_r3t:
rtte.val = ptr;
goto shadow_sgt;
}
+ *pgt = ptr + vaddr.rtx * 8;
rc = gmap_read_table(parent, ptr + vaddr.rtx * 8, &rtte.val);
if (rc)
return rc;
@@ -1123,6 +1128,7 @@ shadow_sgt:
ste.val = ptr;
goto shadow_pgt;
}
+ *pgt = ptr + vaddr.sx * 8;
rc = gmap_read_table(parent, ptr + vaddr.sx * 8, &ste.val);
if (rc)
return rc;
@@ -1157,6 +1163,8 @@ shadow_pgt:
* @vcpu: virtual cpu
* @sg: pointer to the shadow guest address space structure
* @saddr: faulting address in the shadow gmap
+ * @datptr: will contain the address of the faulting DAT table entry, or of
+ * the valid leaf, plus some flags
*
* Returns: - 0 if the shadow fault was successfully resolved
* - > 0 (pgm exception code) on exceptions while faulting
@@ -1165,11 +1173,11 @@ shadow_pgt:
* - -ENOMEM if out of memory
*/
int kvm_s390_shadow_fault(struct kvm_vcpu *vcpu, struct gmap *sg,
- unsigned long saddr)
+ unsigned long saddr, unsigned long *datptr)
{
union vaddress vaddr;
union page_table_entry pte;
- unsigned long pgt;
+ unsigned long pgt = 0;
int dat_protection, fake;
int rc;
@@ -1191,8 +1199,20 @@ int kvm_s390_shadow_fault(struct kvm_vcp
pte.val = pgt + vaddr.px * PAGE_SIZE;
goto shadow_page;
}
- if (!rc)
- rc = gmap_read_table(sg->parent, pgt + vaddr.px * 8, &pte.val);
+
+ switch (rc) {
+ case PGM_SEGMENT_TRANSLATION:
+ case PGM_REGION_THIRD_TRANS:
+ case PGM_REGION_SECOND_TRANS:
+ case PGM_REGION_FIRST_TRANS:
+ pgt |= PEI_NOT_PTE;
+ break;
+ case 0:
+ pgt += vaddr.px * 8;
+ rc = gmap_read_table(sg->parent, pgt, &pte.val);
+ }
+ if (datptr)
+ *datptr = pgt | dat_protection * PEI_DAT_PROT;
if (!rc && pte.i)
rc = PGM_PAGE_TRANSLATION;
if (!rc && pte.z)
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -387,7 +387,11 @@ void ipte_unlock(struct kvm_vcpu *vcpu);
int ipte_lock_held(struct kvm_vcpu *vcpu);
int kvm_s390_check_low_addr_prot_real(struct kvm_vcpu *vcpu, unsigned long gra);
+/* MVPG PEI indication bits */
+#define PEI_DAT_PROT 2
+#define PEI_NOT_PTE 4
+
int kvm_s390_shadow_fault(struct kvm_vcpu *vcpu, struct gmap *shadow,
- unsigned long saddr);
+ unsigned long saddr, unsigned long *datptr);
#endif /* __KVM_S390_GACCESS_H */
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -615,10 +615,10 @@ static int map_prefix(struct kvm_vcpu *v
/* with mso/msl, the prefix lies at offset *mso* */
prefix += scb_s->mso;
- rc = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, prefix);
+ rc = kvm_s390_shadow_fault(vcpu, vsie_page->gmap, prefix, NULL);
if (!rc && (scb_s->ecb & ECB_TE))
rc = kvm_s390_shadow_fault(vcpu, vsie_page->gmap,
- prefix + PAGE_SIZE);
+ prefix + PAGE_SIZE, NULL);
/*
* We don't have to mprotect, we will be called for all unshadows.
* SIE will detect if protection applies and trigger a validity.
@@ -909,7 +909,7 @@ static int handle_fault(struct kvm_vcpu
current->thread.gmap_addr, 1);
rc = kvm_s390_shadow_fault(vcpu, vsie_page->gmap,
- current->thread.gmap_addr);
+ current->thread.gmap_addr, NULL);
if (rc > 0) {
rc = inject_fault(vcpu, rc,
current->thread.gmap_addr,
@@ -931,7 +931,7 @@ static void handle_last_fault(struct kvm
{
if (vsie_page->fault_addr)
kvm_s390_shadow_fault(vcpu, vsie_page->gmap,
- vsie_page->fault_addr);
+ vsie_page->fault_addr, NULL);
vsie_page->fault_addr = 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 106/677] KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 105/677] KVM: s390: extend kvm_s390_shadow_fault to return entry pointer Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 107/677] KVM: x86/xen: Drop RAX[63:32] when processing hypercall Greg Kroah-Hartman
` (577 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ben Gardon, Sean Christopherson,
Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 04d45551a1eefbea42655da52f56e846c0af721a upstream.
Allocate the so called pae_root page on-demand, along with the lm_root
page, when shadowing 32-bit NPT with 64-bit NPT, i.e. when running a
32-bit L1. KVM currently only allocates the page when NPT is disabled,
or when L0 is 32-bit (using PAE paging).
Note, there is an existing memory leak involving the MMU roots, as KVM
fails to free the PAE roots on failure. This will be addressed in a
future commit.
Fixes: ee6268ba3a68 ("KVM: x86: Skip pae_root shadow allocation if tdp enabled")
Fixes: b6b80c78af83 ("KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/mmu/mmu.c | 44 +++++++++++++++++++++++++++++---------------
1 file changed, 29 insertions(+), 15 deletions(-)
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3193,14 +3193,14 @@ void kvm_mmu_free_roots(struct kvm_vcpu
if (mmu->shadow_root_level >= PT64_ROOT_4LEVEL &&
(mmu->root_level >= PT64_ROOT_4LEVEL || mmu->direct_map)) {
mmu_free_root_page(kvm, &mmu->root_hpa, &invalid_list);
- } else {
+ } else if (mmu->pae_root) {
for (i = 0; i < 4; ++i)
if (mmu->pae_root[i] != 0)
mmu_free_root_page(kvm,
&mmu->pae_root[i],
&invalid_list);
- mmu->root_hpa = INVALID_PAGE;
}
+ mmu->root_hpa = INVALID_PAGE;
mmu->root_pgd = 0;
}
@@ -3312,9 +3312,23 @@ static int mmu_alloc_shadow_roots(struct
* the shadow page table may be a PAE or a long mode page table.
*/
pm_mask = PT_PRESENT_MASK;
- if (vcpu->arch.mmu->shadow_root_level == PT64_ROOT_4LEVEL)
+ if (vcpu->arch.mmu->shadow_root_level == PT64_ROOT_4LEVEL) {
pm_mask |= PT_ACCESSED_MASK | PT_WRITABLE_MASK | PT_USER_MASK;
+ /*
+ * Allocate the page for the PDPTEs when shadowing 32-bit NPT
+ * with 64-bit only when needed. Unlike 32-bit NPT, it doesn't
+ * need to be in low mem. See also lm_root below.
+ */
+ if (!vcpu->arch.mmu->pae_root) {
+ WARN_ON_ONCE(!tdp_enabled);
+
+ vcpu->arch.mmu->pae_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
+ if (!vcpu->arch.mmu->pae_root)
+ return -ENOMEM;
+ }
+ }
+
for (i = 0; i < 4; ++i) {
MMU_WARN_ON(VALID_PAGE(vcpu->arch.mmu->pae_root[i]));
if (vcpu->arch.mmu->root_level == PT32E_ROOT_LEVEL) {
@@ -3337,21 +3351,19 @@ static int mmu_alloc_shadow_roots(struct
vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->pae_root);
/*
- * If we shadow a 32 bit page table with a long mode page
- * table we enter this path.
+ * When shadowing 32-bit or PAE NPT with 64-bit NPT, the PML4 and PDP
+ * tables are allocated and initialized at MMU creation as there is no
+ * equivalent level in the guest's NPT to shadow. Allocate the tables
+ * on demand, as running a 32-bit L1 VMM is very rare. The PDP is
+ * handled above (to share logic with PAE), deal with the PML4 here.
*/
if (vcpu->arch.mmu->shadow_root_level == PT64_ROOT_4LEVEL) {
if (vcpu->arch.mmu->lm_root == NULL) {
- /*
- * The additional page necessary for this is only
- * allocated on demand.
- */
-
u64 *lm_root;
lm_root = (void*)get_zeroed_page(GFP_KERNEL_ACCOUNT);
- if (lm_root == NULL)
- return 1;
+ if (!lm_root)
+ return -ENOMEM;
lm_root[0] = __pa(vcpu->arch.mmu->pae_root) | pm_mask;
@@ -5240,9 +5252,11 @@ static int __kvm_mmu_create(struct kvm_v
* while the PDP table is a per-vCPU construct that's allocated at MMU
* creation. When emulating 32-bit mode, cr3 is only 32 bits even on
* x86_64. Therefore we need to allocate the PDP table in the first
- * 4GB of memory, which happens to fit the DMA32 zone. Except for
- * SVM's 32-bit NPT support, TDP paging doesn't use PAE paging and can
- * skip allocating the PDP table.
+ * 4GB of memory, which happens to fit the DMA32 zone. TDP paging
+ * generally doesn't use PAE paging and can skip allocating the PDP
+ * table. The main exception, handled here, is SVM's 32-bit NPT. The
+ * other exception is for shadowing L1's 32-bit or PAE NPT on 64-bit
+ * KVM; that horror is handled on-demand by mmu_alloc_shadow_roots().
*/
if (tdp_enabled && kvm_mmu_get_tdp_level(vcpu) > PT32E_ROOT_LEVEL)
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 107/677] KVM: x86/xen: Drop RAX[63:32] when processing hypercall
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 106/677] KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 108/677] KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests Greg Kroah-Hartman
` (576 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joao Martins, David Woodhouse,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 6b48fd4cb206485c357420d91ea766ef81b20dc3 upstream.
Truncate RAX to 32 bits, i.e. consume EAX, when retrieving the hypecall
index for a Xen hypercall. Per Xen documentation[*], the index is EAX
when the vCPU is not in 64-bit mode.
[*] http://xenbits.xenproject.org/docs/sphinx-unstable/guest-guide/x86/hypercall-abi.html
Fixes: 23200b7a30de ("KVM: x86/xen: intercept xen hypercalls if enabled")
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/xen.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -673,7 +673,7 @@ int kvm_xen_hypercall(struct kvm_vcpu *v
bool longmode;
u64 input, params[6];
- input = (u64)kvm_register_read(vcpu, VCPU_REGS_RAX);
+ input = (u64)kvm_register_readl(vcpu, VCPU_REGS_RAX);
/* Hyper-V hypercalls get bit 31 set in EAX */
if ((input & 0x80000000) &&
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 108/677] KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 107/677] KVM: x86/xen: Drop RAX[63:32] when processing hypercall Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 109/677] KVM: x86: Properly handle APF vs disabled LAPIC situation Greg Kroah-Hartman
` (575 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wanpeng Li, Paolo Bonzini
From: Wanpeng Li <wanpengli@tencent.com>
commit b86bb11e3a79ac0db9a6786b1fe80f74321cb076 upstream.
Commit f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under
SEV-ES") prevents hypervisor accesses guest register state when the guest is
running under SEV-ES. The initial value of vcpu->arch.guest_state_protected
is false, it will not be updated in preemption notifiers after this commit which
means that the kernel spinlock lock holder will always be skipped to boost. Let's
fix it by always treating preempted is in the guest kernel mode, false positive
is better than skip completely.
Fixes: f1c6366e3043 (KVM: SVM: Add required changes to support intercepts under SEV-ES)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1619080459-30032-1-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/x86.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -11020,6 +11020,9 @@ bool kvm_arch_dy_runnable(struct kvm_vcp
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
{
+ if (vcpu->arch.guest_state_protected)
+ return true;
+
return vcpu->arch.preempted_in_kernel;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 109/677] KVM: x86: Properly handle APF vs disabled LAPIC situation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 108/677] KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 110/677] KVM: x86: Check CR3 GPA for validity regardless of vCPU mode Greg Kroah-Hartman
` (574 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastien Boeuf, Vitaly Kuznetsov,
Paolo Bonzini
From: Vitaly Kuznetsov <vkuznets@redhat.com>
commit 2f15d027c05fac406decdb5eceb9ec0902b68f53 upstream.
Async PF 'page ready' event may happen when LAPIC is (temporary) disabled.
In particular, Sebastien reports that when Linux kernel is directly booted
by Cloud Hypervisor, LAPIC is 'software disabled' when APF mechanism is
initialized. On initialization KVM tries to inject 'wakeup all' event and
puts the corresponding token to the slot. It is, however, failing to inject
an interrupt (kvm_apic_set_irq() -> __apic_accept_irq() -> !apic_enabled())
so the guest never gets notified and the whole APF mechanism gets stuck.
The same issue is likely to happen if the guest temporary disables LAPIC
and a previously unavailable page becomes available.
Do two things to resolve the issue:
- Avoid dequeuing 'page ready' events from APF queue when LAPIC is
disabled.
- Trigger an attempt to deliver pending 'page ready' events when LAPIC
becomes enabled (SPIV or MSR_IA32_APICBASE).
Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210422092948.568327-1-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 6 ++++++
arch/x86/kvm/x86.c | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -296,6 +296,10 @@ static inline void apic_set_spiv(struct
atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
}
+
+ /* Check if there are APF page ready requests pending */
+ if (enabled)
+ kvm_make_request(KVM_REQ_APF_READY, apic->vcpu);
}
static inline void kvm_apic_set_xapic_id(struct kvm_lapic *apic, u8 id)
@@ -2261,6 +2265,8 @@ void kvm_lapic_set_base(struct kvm_vcpu
if (value & MSR_IA32_APICBASE_ENABLE) {
kvm_apic_set_xapic_id(apic, vcpu->vcpu_id);
static_branch_slow_dec_deferred(&apic_hw_disabled);
+ /* Check if there are APF page ready requests pending */
+ kvm_make_request(KVM_REQ_APF_READY, vcpu);
} else {
static_branch_inc(&apic_hw_disabled.key);
atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -11293,7 +11293,7 @@ bool kvm_arch_can_dequeue_async_page_pre
if (!kvm_pv_async_pf_enabled(vcpu))
return true;
else
- return apf_pageready_slot_free(vcpu);
+ return kvm_lapic_enabled(vcpu) && apf_pageready_slot_free(vcpu);
}
void kvm_arch_start_assignment(struct kvm *kvm)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 110/677] KVM: x86: Check CR3 GPA for validity regardless of vCPU mode
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 109/677] KVM: x86: Properly handle APF vs disabled LAPIC situation Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 111/677] KVM: x86: Remove emulators broken checks on CR0/CR3/CR4 loads Greg Kroah-Hartman
` (573 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 886bbcc7a523b8d4fac60f1015d2e0fcad50db82 upstream.
Check CR3 for an invalid GPA even if the vCPU isn't in long mode. For
bigger emulation flows, notably RSM, the vCPU mode may not be accurate
if CR0/CR4 are loaded after CR3. For MOV CR3 and similar flows, the
caller is responsible for truncating the value.
Fixes: 660a5d517aaa ("KVM: x86: save/load state on SMM switch")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/x86.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1072,10 +1072,15 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, u
return 0;
}
- if (is_long_mode(vcpu) && kvm_vcpu_is_illegal_gpa(vcpu, cr3))
+ /*
+ * Do not condition the GPA check on long mode, this helper is used to
+ * stuff CR3, e.g. for RSM emulation, and there is no guarantee that
+ * the current vCPU mode is accurate.
+ */
+ if (kvm_vcpu_is_illegal_gpa(vcpu, cr3))
return 1;
- else if (is_pae_paging(vcpu) &&
- !load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3))
+
+ if (is_pae_paging(vcpu) && !load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3))
return 1;
kvm_mmu_new_pgd(vcpu, cr3, skip_tlb_flush, skip_tlb_flush);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 111/677] KVM: x86: Remove emulators broken checks on CR0/CR3/CR4 loads
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 110/677] KVM: x86: Check CR3 GPA for validity regardless of vCPU mode Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 112/677] KVM: nSVM: Set the shadow root level to the TDP level for nested NPT Greg Kroah-Hartman
` (572 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Babu Moger, Sean Christopherson,
Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit d0fe7b6404408835ed60232cb3bf28324b2f95db upstream.
Remove the emulator's checks for illegal CR0, CR3, and CR4 values, as
the checks are redundant, outdated, and in the case of SEV's C-bit,
broken. The emulator manually calculates MAXPHYADDR from CPUID and
neglects to mask off the C-bit. For all other checks, kvm_set_cr*() are
a superset of the emulator checks, e.g. see CR4.LA57.
Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-2-seanjc@google.com>
Cc: stable@vger.kernel.org
[Unify check_cr_read and check_cr_write. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/emulate.c | 80 +------------------------------------------------
1 file changed, 3 insertions(+), 77 deletions(-)
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4220,7 +4220,7 @@ static bool valid_cr(int nr)
}
}
-static int check_cr_read(struct x86_emulate_ctxt *ctxt)
+static int check_cr_access(struct x86_emulate_ctxt *ctxt)
{
if (!valid_cr(ctxt->modrm_reg))
return emulate_ud(ctxt);
@@ -4228,80 +4228,6 @@ static int check_cr_read(struct x86_emul
return X86EMUL_CONTINUE;
}
-static int check_cr_write(struct x86_emulate_ctxt *ctxt)
-{
- u64 new_val = ctxt->src.val64;
- int cr = ctxt->modrm_reg;
- u64 efer = 0;
-
- static u64 cr_reserved_bits[] = {
- 0xffffffff00000000ULL,
- 0, 0, 0, /* CR3 checked later */
- CR4_RESERVED_BITS,
- 0, 0, 0,
- CR8_RESERVED_BITS,
- };
-
- if (!valid_cr(cr))
- return emulate_ud(ctxt);
-
- if (new_val & cr_reserved_bits[cr])
- return emulate_gp(ctxt, 0);
-
- switch (cr) {
- case 0: {
- u64 cr4;
- if (((new_val & X86_CR0_PG) && !(new_val & X86_CR0_PE)) ||
- ((new_val & X86_CR0_NW) && !(new_val & X86_CR0_CD)))
- return emulate_gp(ctxt, 0);
-
- cr4 = ctxt->ops->get_cr(ctxt, 4);
- ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
-
- if ((new_val & X86_CR0_PG) && (efer & EFER_LME) &&
- !(cr4 & X86_CR4_PAE))
- return emulate_gp(ctxt, 0);
-
- break;
- }
- case 3: {
- u64 rsvd = 0;
-
- ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
- if (efer & EFER_LMA) {
- u64 maxphyaddr;
- u32 eax, ebx, ecx, edx;
-
- eax = 0x80000008;
- ecx = 0;
- if (ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx,
- &edx, true))
- maxphyaddr = eax & 0xff;
- else
- maxphyaddr = 36;
- rsvd = rsvd_bits(maxphyaddr, 63);
- if (ctxt->ops->get_cr(ctxt, 4) & X86_CR4_PCIDE)
- rsvd &= ~X86_CR3_PCID_NOFLUSH;
- }
-
- if (new_val & rsvd)
- return emulate_gp(ctxt, 0);
-
- break;
- }
- case 4: {
- ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
-
- if ((efer & EFER_LMA) && !(new_val & X86_CR4_PAE))
- return emulate_gp(ctxt, 0);
-
- break;
- }
- }
-
- return X86EMUL_CONTINUE;
-}
-
static int check_dr7_gd(struct x86_emulate_ctxt *ctxt)
{
unsigned long dr7;
@@ -4841,10 +4767,10 @@ static const struct opcode twobyte_table
D(ImplicitOps | ModRM | SrcMem | NoAccess), /* 8 * reserved NOP */
D(ImplicitOps | ModRM | SrcMem | NoAccess), /* NOP + 7 * reserved NOP */
/* 0x20 - 0x2F */
- DIP(ModRM | DstMem | Priv | Op3264 | NoMod, cr_read, check_cr_read),
+ DIP(ModRM | DstMem | Priv | Op3264 | NoMod, cr_read, check_cr_access),
DIP(ModRM | DstMem | Priv | Op3264 | NoMod, dr_read, check_dr_read),
IIP(ModRM | SrcMem | Priv | Op3264 | NoMod, em_cr_write, cr_write,
- check_cr_write),
+ check_cr_access),
IIP(ModRM | SrcMem | Priv | Op3264 | NoMod, em_dr_write, dr_write,
check_dr_write),
N, N, N, N,
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 112/677] KVM: nSVM: Set the shadow root level to the TDP level for nested NPT
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 111/677] KVM: x86: Remove emulators broken checks on CR0/CR3/CR4 loads Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 113/677] KVM: SVM: Dont strip the C-bit from CR2 on #PF interception Greg Kroah-Hartman
` (571 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit a3322d5cd87fef5ec0037fd1b14068a533f9a60f upstream.
Override the shadow root level in the MMU context when configuring
NPT for shadowing nested NPT. The level is always tied to the TDP level
of the host, not whatever level the guest happens to be using.
Fixes: 096586fda522 ("KVM: nSVM: Correctly set the shadow NPT root level in its MMU role")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/mmu/mmu.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4627,12 +4627,17 @@ void kvm_init_shadow_npt_mmu(struct kvm_
struct kvm_mmu *context = &vcpu->arch.guest_mmu;
union kvm_mmu_role new_role = kvm_calc_shadow_npt_root_page_role(vcpu);
- context->shadow_root_level = new_role.base.level;
-
__kvm_mmu_new_pgd(vcpu, nested_cr3, new_role.base, false, false);
- if (new_role.as_u64 != context->mmu_role.as_u64)
+ if (new_role.as_u64 != context->mmu_role.as_u64) {
shadow_mmu_init_context(vcpu, context, cr0, cr4, efer, new_role);
+
+ /*
+ * Override the level set by the common init helper, nested TDP
+ * always uses the host's TDP configuration.
+ */
+ context->shadow_root_level = new_role.base.level;
+ }
}
EXPORT_SYMBOL_GPL(kvm_init_shadow_npt_mmu);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 113/677] KVM: SVM: Dont strip the C-bit from CR2 on #PF interception
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 112/677] KVM: nSVM: Set the shadow root level to the TDP level for nested NPT Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 114/677] KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Greg Kroah-Hartman
` (570 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brijesh Singh, Tom Lendacky,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 6d1b867d045699d6ce0dfa0ef35d1b87dd36db56 upstream.
Don't strip the C-bit from the faulting address on an intercepted #PF,
the address is a virtual address, not a physical address.
Fixes: 0ede79e13224 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/svm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1898,7 +1898,7 @@ static void svm_set_dr7(struct kvm_vcpu
static int pf_interception(struct vcpu_svm *svm)
{
- u64 fault_address = __sme_clr(svm->vmcb->control.exit_info_2);
+ u64 fault_address = svm->vmcb->control.exit_info_2;
u64 error_code = svm->vmcb->control.exit_info_1;
return kvm_handle_page_fault(&svm->vcpu, error_code, fault_address,
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 114/677] KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 113/677] KVM: SVM: Dont strip the C-bit from CR2 on #PF interception Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 115/677] KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes Greg Kroah-Hartman
` (569 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brijesh Singh, Tom Lendacky,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit c36b16d29f3af5f32fc1b2a3401bf48f71cabee1 upstream.
Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting
VMSAs for SEV, which effectively switches to use online_vcpus instead of
created_vcpus. This fixes a possible null-pointer dereference as
created_vcpus does not guarantee a vCPU exists, since it is updated at
the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the
bulk of vCPU creation to run in parallel, while still correctly
restricting the max number of max vCPUs.
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/sev.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -564,6 +564,7 @@ static int sev_launch_update_vmsa(struct
{
struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
struct sev_data_launch_update_vmsa *vmsa;
+ struct kvm_vcpu *vcpu;
int i, ret;
if (!sev_es_guest(kvm))
@@ -573,8 +574,8 @@ static int sev_launch_update_vmsa(struct
if (!vmsa)
return -ENOMEM;
- for (i = 0; i < kvm->created_vcpus; i++) {
- struct vcpu_svm *svm = to_svm(kvm->vcpus[i]);
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ struct vcpu_svm *svm = to_svm(vcpu);
/* Perform some pre-encryption checks against the VMSA */
ret = sev_es_sync_vmsa(svm);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 115/677] KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 114/677] KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 116/677] KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created Greg Kroah-Hartman
` (568 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brijesh Singh, Tom Lendacky,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 9fa1521daafb58d878d03d75f6863a11312fae22 upstream.
Set sev->es_active only after the guts of KVM_SEV_ES_INIT succeeds. If
the command fails, e.g. because SEV is already active or there are no
available ASIDs, then es_active will be left set even though the VM is
not fully SEV-ES capable.
Refactor the code so that "es_active" is passed on the stack instead of
being prematurely shoved into sev_info, both to avoid having to unwind
sev_info and so that it's more obvious what actually consumes es_active
in sev_guest_init() and its helpers.
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/sev.c | 29 ++++++++++++-----------------
1 file changed, 12 insertions(+), 17 deletions(-)
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -87,7 +87,7 @@ static bool __sev_recycle_asids(int min_
return true;
}
-static int sev_asid_new(struct kvm_sev_info *sev)
+static int sev_asid_new(bool es_active)
{
int pos, min_asid, max_asid;
bool retry = true;
@@ -98,8 +98,8 @@ static int sev_asid_new(struct kvm_sev_i
* SEV-enabled guests must use asid from min_sev_asid to max_sev_asid.
* SEV-ES-enabled guest can use from 1 to min_sev_asid - 1.
*/
- min_asid = sev->es_active ? 0 : min_sev_asid - 1;
- max_asid = sev->es_active ? min_sev_asid - 1 : max_sev_asid;
+ min_asid = es_active ? 0 : min_sev_asid - 1;
+ max_asid = es_active ? min_sev_asid - 1 : max_sev_asid;
again:
pos = find_next_zero_bit(sev_asid_bitmap, max_sev_asid, min_asid);
if (pos >= max_asid) {
@@ -179,13 +179,14 @@ static void sev_unbind_asid(struct kvm *
static int sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp)
{
struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
+ bool es_active = argp->id == KVM_SEV_ES_INIT;
int asid, ret;
ret = -EBUSY;
if (unlikely(sev->active))
return ret;
- asid = sev_asid_new(sev);
+ asid = sev_asid_new(es_active);
if (asid < 0)
return ret;
@@ -194,6 +195,7 @@ static int sev_guest_init(struct kvm *kv
goto e_free;
sev->active = true;
+ sev->es_active = es_active;
sev->asid = asid;
INIT_LIST_HEAD(&sev->regions_list);
@@ -204,16 +206,6 @@ e_free:
return ret;
}
-static int sev_es_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp)
-{
- if (!sev_es)
- return -ENOTTY;
-
- to_kvm_svm(kvm)->sev_info.es_active = true;
-
- return sev_guest_init(kvm, argp);
-}
-
static int sev_bind_asid(struct kvm *kvm, unsigned int handle, int *error)
{
struct sev_data_activate *data;
@@ -1128,12 +1120,15 @@ int svm_mem_enc_op(struct kvm *kvm, void
mutex_lock(&kvm->lock);
switch (sev_cmd.id) {
+ case KVM_SEV_ES_INIT:
+ if (!sev_es) {
+ r = -ENOTTY;
+ goto out;
+ }
+ fallthrough;
case KVM_SEV_INIT:
r = sev_guest_init(kvm, &sev_cmd);
break;
- case KVM_SEV_ES_INIT:
- r = sev_es_guest_init(kvm, &sev_cmd);
- break;
case KVM_SEV_LAUNCH_START:
r = sev_launch_start(kvm, &sev_cmd);
break;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 116/677] KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 115/677] KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 117/677] KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported Greg Kroah-Hartman
` (567 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brijesh Singh, Tom Lendacky,
Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 8727906fde6ea665b52e68ddc58833772537f40a upstream.
Reject KVM_SEV_INIT and KVM_SEV_ES_INIT if they are attempted after one
or more vCPUs have been created. KVM assumes a VM is tagged SEV/SEV-ES
prior to vCPU creation, e.g. init_vmcb() needs to mark the VMCB as SEV
enabled, and svm_create_vcpu() needs to allocate the VMSA. At best,
creating vCPUs before SEV/SEV-ES init will lead to unexpected errors
and/or behavior, and at worst it will crash the host, e.g.
sev_launch_update_vmsa() will dereference a null svm->vmsa pointer.
Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/sev.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -182,6 +182,9 @@ static int sev_guest_init(struct kvm *kv
bool es_active = argp->id == KVM_SEV_ES_INIT;
int asid, ret;
+ if (kvm->created_vcpus)
+ return -EINVAL;
+
ret = -EBUSY;
if (unlikely(sev->active))
return ret;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 117/677] KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 116/677] KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 118/677] KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch Greg Kroah-Hartman
` (566 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson,
Vitaly Kuznetsov, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 6f2b296aa6432d8274e258cc3220047ca04f5de0 upstream.
Inject #GP on guest accesses to MSR_TSC_AUX if RDTSCP is unsupported in
the guest's CPUID model.
Fixes: 46896c73c1a4 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/svm/svm.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -2738,6 +2738,9 @@ static int svm_get_msr(struct kvm_vcpu *
case MSR_TSC_AUX:
if (!boot_cpu_has(X86_FEATURE_RDTSCP))
return 1;
+ if (!msr_info->host_initiated &&
+ !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
+ return 1;
msr_info->data = svm->tsc_aux;
break;
/*
@@ -2946,6 +2949,10 @@ static int svm_set_msr(struct kvm_vcpu *
if (!boot_cpu_has(X86_FEATURE_RDTSCP))
return 1;
+ if (!msr->host_initiated &&
+ !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
+ return 1;
+
/*
* This is rare, so we update the MSR here instead of using
* direct_access_msrs. Doing that would require a rdmsr in
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 118/677] KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 117/677] KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 119/677] KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode Greg Kroah-Hartman
` (565 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit c805f5d5585ab5e0cdac6b1ccf7086eb120fb7db upstream.
Defer reloading the MMU after a EPTP successful EPTP switch. The VMFUNC
instruction itself is executed in the previous EPTP context, any side
effects, e.g. updating RIP, should occur in the old context. Practically
speaking, this bug is benign as VMX doesn't touch the MMU when skipping
an emulated instruction, nor does queuing a single-step #DB. No other
post-switch side effects exist.
Fixes: 41ab93727467 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/nested.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -5479,16 +5479,11 @@ static int nested_vmx_eptp_switching(str
if (!nested_vmx_check_eptp(vcpu, new_eptp))
return 1;
- kvm_mmu_unload(vcpu);
mmu->ept_ad = accessed_dirty;
mmu->mmu_role.base.ad_disabled = !accessed_dirty;
vmcs12->ept_pointer = new_eptp;
- /*
- * TODO: Check what's the correct approach in case
- * mmu reload fails. Currently, we just let the next
- * reload potentially fail
- */
- kvm_mmu_reload(vcpu);
+
+ kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu);
}
return 0;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 119/677] KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 118/677] KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 120/677] KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit Greg Kroah-Hartman
` (564 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit d8971344f5739a9cc53f91f1f593ddd82265b93b upstream.
Drop bits 63:32 when storing a DR/CR to a GPR when the vCPU is not in
64-bit mode. Per the SDM:
The operand size for these instructions is always 32 bits in non-64-bit
modes, regardless of the operand-size attribute.
CR8 technically isn't affected as CR8 isn't accessible outside of 64-bit
mode, but fix it up for consistency and to allow for future cleanup.
Fixes: 6aa8b732ca01 ("[PATCH] kvm: userspace interface")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/vmx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -5062,12 +5062,12 @@ static int handle_cr(struct kvm_vcpu *vc
case 3:
WARN_ON_ONCE(enable_unrestricted_guest);
val = kvm_read_cr3(vcpu);
- kvm_register_write(vcpu, reg, val);
+ kvm_register_writel(vcpu, reg, val);
trace_kvm_cr_read(cr, val);
return kvm_skip_emulated_instruction(vcpu);
case 8:
val = kvm_get_cr8(vcpu);
- kvm_register_write(vcpu, reg, val);
+ kvm_register_writel(vcpu, reg, val);
trace_kvm_cr_read(cr, val);
return kvm_skip_emulated_instruction(vcpu);
}
@@ -5140,7 +5140,7 @@ static int handle_dr(struct kvm_vcpu *vc
unsigned long val;
kvm_get_dr(vcpu, dr, &val);
- kvm_register_write(vcpu, reg, val);
+ kvm_register_writel(vcpu, reg, val);
err = 0;
} else {
err = kvm_set_dr(vcpu, dr, kvm_register_readl(vcpu, reg));
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 120/677] KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 119/677] KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 121/677] KVM: nVMX: Truncate base/index GPR value on address calc " Greg Kroah-Hartman
` (563 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit ee050a577523dfd5fac95e6cc182ebe0293ead59 upstream.
Drop bits 63:32 of the VMCS field encoding when checking for a nested
VM-Exit on VMREAD/VMWRITE in !64-bit mode. VMREAD and VMWRITE always
use 32-bit operands outside of 64-bit mode.
The actual emulation of VMREAD/VMWRITE does the right thing, this bug is
purely limited to incorrectly causing a nested VM-Exit if a GPR happens
to have bits 63:32 set outside of 64-bit mode.
Fixes: a7cde481b6e8 ("KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/nested.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -5712,7 +5712,7 @@ static bool nested_vmx_exit_handled_vmcs
/* Decode instruction info and find the field to access */
vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
- field = kvm_register_read(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
+ field = kvm_register_readl(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
/* Out-of-range fields always cause a VM exit from L2 to L1 */
if (field >> 15)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 121/677] KVM: nVMX: Truncate base/index GPR value on address calc in !64-bit
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 120/677] KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 122/677] KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read Greg Kroah-Hartman
` (562 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 82277eeed65eed6c6ee5b8f97bd978763eab148f upstream.
Drop bits 63:32 of the base and/or index GPRs when calculating the
effective address of a VMX instruction memory operand. Outside of 64-bit
mode, memory encodings are strictly limited to E*X and below.
Fixes: 064aea774768 ("KVM: nVMX: Decoding memory operands of VMX instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/nested.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -4601,9 +4601,9 @@ int get_vmx_mem_address(struct kvm_vcpu
else if (addr_size == 0)
off = (gva_t)sign_extend64(off, 15);
if (base_is_valid)
- off += kvm_register_read(vcpu, base_reg);
+ off += kvm_register_readl(vcpu, base_reg);
if (index_is_valid)
- off += kvm_register_read(vcpu, index_reg) << scaling;
+ off += kvm_register_readl(vcpu, index_reg) << scaling;
vmx_get_segment(vcpu, &s, seg_reg);
/*
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 122/677] KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 121/677] KVM: nVMX: Truncate base/index GPR value on address calc " Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 123/677] KVM: Destroy I/O bus devices on unregister failure _after_ syncing SRCU Greg Kroah-Hartman
` (561 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Auger, Gavin Shan, Marc Zyngier, Stable
From: Eric Auger <eric.auger@redhat.com>
commit 94ac0835391efc1a30feda6fc908913ec012951e upstream.
When reading the base address of the a REDIST region
through KVM_VGIC_V3_ADDR_TYPE_REDIST we expect the
redistributor region list to be populated with a single
element.
However list_first_entry() expects the list to be non empty.
Instead we should use list_first_entry_or_null which effectively
returns NULL if the list is empty.
Fixes: dbd9733ab674 ("KVM: arm/arm64: Replace the single rdist region by a list")
Cc: <Stable@vger.kernel.org> # v4.18+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210412150034.29185-1-eric.auger@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/vgic/vgic-kvm-device.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -87,8 +87,8 @@ int kvm_vgic_addr(struct kvm *kvm, unsig
r = vgic_v3_set_redist_base(kvm, 0, *addr, 0);
goto out;
}
- rdreg = list_first_entry(&vgic->rd_regions,
- struct vgic_redist_region, list);
+ rdreg = list_first_entry_or_null(&vgic->rd_regions,
+ struct vgic_redist_region, list);
if (!rdreg)
addr_ptr = &undef_value;
else
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 123/677] KVM: Destroy I/O bus devices on unregister failure _after_ syncing SRCU
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 122/677] KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 124/677] KVM: Stop looking for coalesced MMIO zones if the bus is destroyed Greg Kroah-Hartman
` (560 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 2ee3757424be7c1cd1d0bbfa6db29a7edd82a250 upstream.
If allocating a new instance of an I/O bus fails when unregistering a
device, wait to destroy the device until after all readers are guaranteed
to see the new null bus. Destroying devices before the bus is nullified
could lead to use-after-free since readers expect the devices on their
reference of the bus to remain valid.
Fixes: f65886606c2d ("KVM: fix memory leak in kvm_io_bus_unregister_dev()")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210412222050.876100-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
virt/kvm/kvm_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -4511,7 +4511,13 @@ void kvm_io_bus_unregister_dev(struct kv
new_bus->dev_count--;
memcpy(new_bus->range + i, bus->range + i + 1,
flex_array_size(new_bus, range, new_bus->dev_count - i));
- } else {
+ }
+
+ rcu_assign_pointer(kvm->buses[bus_idx], new_bus);
+ synchronize_srcu_expedited(&kvm->srcu);
+
+ /* Destroy the old bus _after_ installing the (null) bus. */
+ if (!new_bus) {
pr_err("kvm: failed to shrink bus, removing it completely\n");
for (j = 0; j < bus->dev_count; j++) {
if (j == i)
@@ -4520,8 +4526,6 @@ void kvm_io_bus_unregister_dev(struct kv
}
}
- rcu_assign_pointer(kvm->buses[bus_idx], new_bus);
- synchronize_srcu_expedited(&kvm->srcu);
kfree(bus);
return;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 124/677] KVM: Stop looking for coalesced MMIO zones if the bus is destroyed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 123/677] KVM: Destroy I/O bus devices on unregister failure _after_ syncing SRCU Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 125/677] KVM: arm64: Support PREL/PLT relocs in EL2 code Greg Kroah-Hartman
` (559 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hao Sun, Sean Christopherson, Paolo Bonzini
From: Sean Christopherson <seanjc@google.com>
commit 5d3c4c79384af06e3c8e25b7770b6247496b4417 upstream.
Abort the walk of coalesced MMIO zones if kvm_io_bus_unregister_dev()
fails to allocate memory for the new instance of the bus. If it can't
instantiate a new bus, unregister_dev() destroys all devices _except_ the
target device. But, it doesn't tell the caller that it obliterated the
bus and invoked the destructor for all devices that were on the bus. In
the coalesced MMIO case, this can result in a deleted list entry
dereference due to attempting to continue iterating on coalesced_zones
after future entries (in the walk) have been deleted.
Opportunistically add curly braces to the for-loop, which encompasses
many lines but sneaks by without braces due to the guts being a single
if statement.
Fixes: f65886606c2d ("KVM: fix memory leak in kvm_io_bus_unregister_dev()")
Cc: stable@vger.kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210412222050.876100-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/kvm_host.h | 4 ++--
virt/kvm/coalesced_mmio.c | 19 +++++++++++++++++--
virt/kvm/kvm_main.c | 10 +++++-----
3 files changed, 24 insertions(+), 9 deletions(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -192,8 +192,8 @@ int kvm_io_bus_read(struct kvm_vcpu *vcp
int len, void *val);
int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
int len, struct kvm_io_device *dev);
-void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev);
+int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
+ struct kvm_io_device *dev);
struct kvm_io_device *kvm_io_bus_get_dev(struct kvm *kvm, enum kvm_bus bus_idx,
gpa_t addr);
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -174,21 +174,36 @@ int kvm_vm_ioctl_unregister_coalesced_mm
struct kvm_coalesced_mmio_zone *zone)
{
struct kvm_coalesced_mmio_dev *dev, *tmp;
+ int r;
if (zone->pio != 1 && zone->pio != 0)
return -EINVAL;
mutex_lock(&kvm->slots_lock);
- list_for_each_entry_safe(dev, tmp, &kvm->coalesced_zones, list)
+ list_for_each_entry_safe(dev, tmp, &kvm->coalesced_zones, list) {
if (zone->pio == dev->zone.pio &&
coalesced_mmio_in_range(dev, zone->addr, zone->size)) {
- kvm_io_bus_unregister_dev(kvm,
+ r = kvm_io_bus_unregister_dev(kvm,
zone->pio ? KVM_PIO_BUS : KVM_MMIO_BUS, &dev->dev);
kvm_iodevice_destructor(&dev->dev);
+
+ /*
+ * On failure, unregister destroys all devices on the
+ * bus _except_ the target device, i.e. coalesced_zones
+ * has been modified. No need to restart the walk as
+ * there aren't any zones left.
+ */
+ if (r)
+ break;
}
+ }
mutex_unlock(&kvm->slots_lock);
+ /*
+ * Ignore the result of kvm_io_bus_unregister_dev(), from userspace's
+ * perspective, the coalesced MMIO is most definitely unregistered.
+ */
return 0;
}
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -4486,15 +4486,15 @@ int kvm_io_bus_register_dev(struct kvm *
}
/* Caller must hold slots_lock. */
-void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
- struct kvm_io_device *dev)
+int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
+ struct kvm_io_device *dev)
{
int i, j;
struct kvm_io_bus *new_bus, *bus;
bus = kvm_get_bus(kvm, bus_idx);
if (!bus)
- return;
+ return 0;
for (i = 0; i < bus->dev_count; i++)
if (bus->range[i].dev == dev) {
@@ -4502,7 +4502,7 @@ void kvm_io_bus_unregister_dev(struct kv
}
if (i == bus->dev_count)
- return;
+ return 0;
new_bus = kmalloc(struct_size(bus, range, bus->dev_count - 1),
GFP_KERNEL_ACCOUNT);
@@ -4527,7 +4527,7 @@ void kvm_io_bus_unregister_dev(struct kv
}
kfree(bus);
- return;
+ return new_bus ? 0 : -ENOMEM;
}
struct kvm_io_device *kvm_io_bus_get_dev(struct kvm *kvm, enum kvm_bus bus_idx,
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 125/677] KVM: arm64: Support PREL/PLT relocs in EL2 code
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 124/677] KVM: Stop looking for coalesced MMIO zones if the bus is destroyed Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 126/677] KVM: arm64: Fully zero the vcpu state on reset Greg Kroah-Hartman
` (558 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, David Brazdil, Marc Zyngier
From: David Brazdil <dbrazdil@google.com>
commit 77e06b300161d41d65950be9c77a785c142b381d upstream.
gen-hyprel tool parses object files of the EL2 portion of KVM
and generates runtime relocation data. While only filtering for
R_AARCH64_ABS64 relocations in the input object files, it has an
allow-list of relocation types that are used for relative
addressing. Other, unexpected, relocation types are rejected and
cause the build to fail.
This allow-list did not include the position-relative relocation
types R_AARCH64_PREL64/32/16 and the recently introduced _PLT32.
While not seen used by toolchains in the wild, add them to the
allow-list for completeness.
Fixes: 8c49b5d43d4c ("KVM: arm64: Generate hyp relocation data")
Cc: <stable@vger.kernel.org>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210331133048.63311-1-dbrazdil@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/hyp/nvhe/gen-hyprel.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
+++ b/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
@@ -50,6 +50,18 @@
#ifndef R_AARCH64_ABS64
#define R_AARCH64_ABS64 257
#endif
+#ifndef R_AARCH64_PREL64
+#define R_AARCH64_PREL64 260
+#endif
+#ifndef R_AARCH64_PREL32
+#define R_AARCH64_PREL32 261
+#endif
+#ifndef R_AARCH64_PREL16
+#define R_AARCH64_PREL16 262
+#endif
+#ifndef R_AARCH64_PLT32
+#define R_AARCH64_PLT32 314
+#endif
#ifndef R_AARCH64_LD_PREL_LO19
#define R_AARCH64_LD_PREL_LO19 273
#endif
@@ -371,6 +383,12 @@ static void emit_rela_section(Elf64_Shdr
case R_AARCH64_ABS64:
emit_rela_abs64(rela, sh_orig_name);
break;
+ /* Allow position-relative data relocations. */
+ case R_AARCH64_PREL64:
+ case R_AARCH64_PREL32:
+ case R_AARCH64_PREL16:
+ case R_AARCH64_PLT32:
+ break;
/* Allow relocations to generate PC-relative addressing. */
case R_AARCH64_LD_PREL_LO19:
case R_AARCH64_ADR_PREL_LO21:
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 126/677] KVM: arm64: Fully zero the vcpu state on reset
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 125/677] KVM: arm64: Support PREL/PLT relocs in EL2 code Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 127/677] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read Greg Kroah-Hartman
` (557 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Marc Zyngier
From: Marc Zyngier <maz@kernel.org>
commit 85d703746154cdc6794b6654b587b0b0354c97e9 upstream.
On vcpu reset, we expect all the registers to be brought back
to their initial state, which happens to be a bunch of zeroes.
However, some recent commit broke this, and is now leaving a bunch
of registers (such as the FP state) with whatever was left by the
guest. My bad.
Zero the reset of the state (32bit SPSRs and FPSIMD state).
Cc: stable@vger.kernel.org
Fixes: e47c2055c68e ("KVM: arm64: Make struct kvm_regs userspace-only")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/reset.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -242,6 +242,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu
/* Reset core registers */
memset(vcpu_gp_regs(vcpu), 0, sizeof(*vcpu_gp_regs(vcpu)));
+ memset(&vcpu->arch.ctxt.fp_regs, 0, sizeof(vcpu->arch.ctxt.fp_regs));
+ vcpu->arch.ctxt.spsr_abt = 0;
+ vcpu->arch.ctxt.spsr_und = 0;
+ vcpu->arch.ctxt.spsr_irq = 0;
+ vcpu->arch.ctxt.spsr_fiq = 0;
vcpu_gp_regs(vcpu)->pstate = pstate;
/* Reset system registers */
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 127/677] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 126/677] KVM: arm64: Fully zero the vcpu state on reset Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 128/677] KVM: selftests: Sync data verify of dirty logging with guest sync Greg Kroah-Hartman
` (556 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Auger, Alexandru Elisei, Marc Zyngier
From: Eric Auger <eric.auger@redhat.com>
commit 53b16dd6ba5cf64ed147ac3523ec34651d553cb0 upstream.
The doc says:
"The characteristics of a specific redistributor region can
be read by presetting the index field in the attr data.
Only valid for KVM_DEV_TYPE_ARM_VGIC_V3"
Unfortunately the existing code fails to read the input attr data.
Fixes: 04c110932225 ("KVM: arm/arm64: Implement KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION")
Cc: stable@vger.kernel.org#v4.17+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-3-eric.auger@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/vgic/vgic-kvm-device.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -226,6 +226,9 @@ static int vgic_get_common_attr(struct k
u64 addr;
unsigned long type = (unsigned long)attr->attr;
+ if (copy_from_user(&addr, uaddr, sizeof(addr)))
+ return -EFAULT;
+
r = kvm_vgic_addr(dev->kvm, type, &addr, false);
if (r)
return (r == -ENODEV) ? -ENXIO : r;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 128/677] KVM: selftests: Sync data verify of dirty logging with guest sync
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 127/677] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 129/677] KVM: selftests: Always run vCPU thread with blocked SIG_IPI Greg Kroah-Hartman
` (555 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Bonzini, Sean Christopherson,
Andrew Jones, Peter Xu
From: Peter Xu <peterx@redhat.com>
commit 016ff1a442d9a8f36dcb3beca0bcdfc35e281e18 upstream.
This fixes a bug that can trigger with e.g. "taskset -c 0 ./dirty_log_test" or
when the testing host is very busy.
A similar previous attempt is done [1] but that is not enough, the reason is
stated in the reply [2].
As a summary (partly quotting from [2]):
The problem is I think one guest memory write operation (of this specific test)
contains a few micro-steps when page is during kvm dirty tracking (here I'm
only considering write-protect rather than pml but pml should be similar at
least when the log buffer is full):
(1) Guest read 'iteration' number into register, prepare to write, page fault
(2) Set dirty bit in either dirty bitmap or dirty ring
(3) Return to guest, data written
When we verify the data, we assumed that all these steps are "atomic", say,
when (1) happened for this page, we assume (2) & (3) must have happened. We
had some trick to workaround "un-atomicity" of above three steps, as previous
version of this patch wanted to fix atomicity of step (2)+(3) by explicitly
letting the main thread wait for at least one vmenter of vcpu thread, which
should work. However what I overlooked is probably that we still have race
when (1) and (2) can be interrupted.
One example calltrace when it could happen that we read an old interation, got
interrupted before even setting the dirty bit and flushing data:
__schedule+1742
__cond_resched+52
__get_user_pages+530
get_user_pages_unlocked+197
hva_to_pfn+206
try_async_pf+132
direct_page_fault+320
kvm_mmu_page_fault+103
vmx_handle_exit+288
vcpu_enter_guest+2460
kvm_arch_vcpu_ioctl_run+325
kvm_vcpu_ioctl+526
__x64_sys_ioctl+131
do_syscall_64+51
entry_SYSCALL_64_after_hwframe+68
It means iteration number cached in vcpu register can be very old when dirty
bit set and data flushed.
So far I don't see an easy way to guarantee all steps 1-3 atomicity but to sync
at the GUEST_SYNC() point of guest code when we do verification of the dirty
bits as what this patch does.
[1] https://lore.kernel.org/lkml/20210413213641.23742-1-peterx@redhat.com/
[2] https://lore.kernel.org/lkml/20210417140956.GV4440@xz-x1/
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210417143602.215059-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/kvm/dirty_log_test.c | 60 ++++++++++++++++++++++-----
1 file changed, 50 insertions(+), 10 deletions(-)
--- a/tools/testing/selftests/kvm/dirty_log_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_test.c
@@ -17,6 +17,7 @@
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <asm/barrier.h>
+#include <linux/atomic.h>
#include "kvm_util.h"
#include "test_util.h"
@@ -137,12 +138,20 @@ static uint64_t host_clear_count;
static uint64_t host_track_next_count;
/* Whether dirty ring reset is requested, or finished */
-static sem_t dirty_ring_vcpu_stop;
-static sem_t dirty_ring_vcpu_cont;
+static sem_t sem_vcpu_stop;
+static sem_t sem_vcpu_cont;
+/*
+ * This is only set by main thread, and only cleared by vcpu thread. It is
+ * used to request vcpu thread to stop at the next GUEST_SYNC, since GUEST_SYNC
+ * is the only place that we'll guarantee both "dirty bit" and "dirty data"
+ * will match. E.g., SIG_IPI won't guarantee that if the vcpu is interrupted
+ * after setting dirty bit but before the data is written.
+ */
+static atomic_t vcpu_sync_stop_requested;
/*
* This is updated by the vcpu thread to tell the host whether it's a
* ring-full event. It should only be read until a sem_wait() of
- * dirty_ring_vcpu_stop and before vcpu continues to run.
+ * sem_vcpu_stop and before vcpu continues to run.
*/
static bool dirty_ring_vcpu_ring_full;
/*
@@ -234,6 +243,17 @@ static void clear_log_collect_dirty_page
kvm_vm_clear_dirty_log(vm, slot, bitmap, 0, num_pages);
}
+/* Should only be called after a GUEST_SYNC */
+static void vcpu_handle_sync_stop(void)
+{
+ if (atomic_read(&vcpu_sync_stop_requested)) {
+ /* It means main thread is sleeping waiting */
+ atomic_set(&vcpu_sync_stop_requested, false);
+ sem_post(&sem_vcpu_stop);
+ sem_wait_until(&sem_vcpu_cont);
+ }
+}
+
static void default_after_vcpu_run(struct kvm_vm *vm, int ret, int err)
{
struct kvm_run *run = vcpu_state(vm, VCPU_ID);
@@ -244,6 +264,8 @@ static void default_after_vcpu_run(struc
TEST_ASSERT(get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC,
"Invalid guest sync status: exit_reason=%s\n",
exit_reason_str(run->exit_reason));
+
+ vcpu_handle_sync_stop();
}
static bool dirty_ring_supported(void)
@@ -301,13 +323,13 @@ static void dirty_ring_wait_vcpu(void)
{
/* This makes sure that hardware PML cache flushed */
vcpu_kick();
- sem_wait_until(&dirty_ring_vcpu_stop);
+ sem_wait_until(&sem_vcpu_stop);
}
static void dirty_ring_continue_vcpu(void)
{
pr_info("Notifying vcpu to continue\n");
- sem_post(&dirty_ring_vcpu_cont);
+ sem_post(&sem_vcpu_cont);
}
static void dirty_ring_collect_dirty_pages(struct kvm_vm *vm, int slot,
@@ -361,11 +383,11 @@ static void dirty_ring_after_vcpu_run(st
/* Update the flag first before pause */
WRITE_ONCE(dirty_ring_vcpu_ring_full,
run->exit_reason == KVM_EXIT_DIRTY_RING_FULL);
- sem_post(&dirty_ring_vcpu_stop);
+ sem_post(&sem_vcpu_stop);
pr_info("vcpu stops because %s...\n",
dirty_ring_vcpu_ring_full ?
"dirty ring is full" : "vcpu is kicked out");
- sem_wait_until(&dirty_ring_vcpu_cont);
+ sem_wait_until(&sem_vcpu_cont);
pr_info("vcpu continues now.\n");
} else {
TEST_ASSERT(false, "Invalid guest sync status: "
@@ -377,7 +399,7 @@ static void dirty_ring_after_vcpu_run(st
static void dirty_ring_before_vcpu_join(void)
{
/* Kick another round of vcpu just to make sure it will quit */
- sem_post(&dirty_ring_vcpu_cont);
+ sem_post(&sem_vcpu_cont);
}
struct log_mode {
@@ -768,7 +790,25 @@ static void run_test(enum vm_guest_mode
usleep(p->interval * 1000);
log_mode_collect_dirty_pages(vm, TEST_MEM_SLOT_INDEX,
bmap, host_num_pages);
+
+ /*
+ * See vcpu_sync_stop_requested definition for details on why
+ * we need to stop vcpu when verify data.
+ */
+ atomic_set(&vcpu_sync_stop_requested, true);
+ sem_wait_until(&sem_vcpu_stop);
+ /*
+ * NOTE: for dirty ring, it's possible that we didn't stop at
+ * GUEST_SYNC but instead we stopped because ring is full;
+ * that's okay too because ring full means we're only missing
+ * the flush of the last page, and since we handle the last
+ * page specially verification will succeed anyway.
+ */
+ assert(host_log_mode == LOG_MODE_DIRTY_RING ||
+ atomic_read(&vcpu_sync_stop_requested) == false);
vm_dirty_log_verify(mode, bmap);
+ sem_post(&sem_vcpu_cont);
+
iteration++;
sync_global_to_guest(vm, iteration);
}
@@ -819,8 +859,8 @@ int main(int argc, char *argv[])
};
int opt, i;
- sem_init(&dirty_ring_vcpu_stop, 0, 0);
- sem_init(&dirty_ring_vcpu_cont, 0, 0);
+ sem_init(&sem_vcpu_stop, 0, 0);
+ sem_init(&sem_vcpu_cont, 0, 0);
guest_modes_append_default();
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 129/677] KVM: selftests: Always run vCPU thread with blocked SIG_IPI
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 128/677] KVM: selftests: Sync data verify of dirty logging with guest sync Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 130/677] Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit" Greg Kroah-Hartman
` (554 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Peter Xu, Paolo Bonzini
From: Paolo Bonzini <pbonzini@redhat.com>
commit bf1e15a82e3b74ee86bb119d6038b41e1ed2b319 upstream.
The main thread could start to send SIG_IPI at any time, even before signal
blocked on vcpu thread. Therefore, start the vcpu thread with the signal
blocked.
Without this patch, on very busy cores the dirty_log_test could fail directly
on receiving a SIGUSR1 without a handler (when vcpu runs far slower than main).
Reported-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/kvm/dirty_log_test.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/kvm/dirty_log_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_test.c
@@ -527,9 +527,8 @@ static void *vcpu_worker(void *data)
*/
sigmask->len = 8;
pthread_sigmask(0, NULL, sigset);
+ sigdelset(sigset, SIG_IPI);
vcpu_ioctl(vm, VCPU_ID, KVM_SET_SIGNAL_MASK, sigmask);
- sigaddset(sigset, SIG_IPI);
- pthread_sigmask(SIG_BLOCK, sigset, NULL);
sigemptyset(sigset);
sigaddset(sigset, SIG_IPI);
@@ -858,6 +857,7 @@ int main(int argc, char *argv[])
.interval = TEST_HOST_LOOP_INTERVAL,
};
int opt, i;
+ sigset_t sigset;
sem_init(&sem_vcpu_stop, 0, 0);
sem_init(&sem_vcpu_cont, 0, 0);
@@ -916,6 +916,11 @@ int main(int argc, char *argv[])
srandom(time(0));
+ /* Ensure that vCPU threads start with SIG_IPI blocked. */
+ sigemptyset(&sigset);
+ sigaddset(&sigset, SIG_IPI);
+ pthread_sigmask(SIG_BLOCK, &sigset, NULL);
+
if (host_log_mode_option == LOG_MODE_ALL) {
/* Run each log mode */
for (i = 0; i < LOG_MODE_NUM; i++) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 130/677] Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 129/677] KVM: selftests: Always run vCPU thread with blocked SIG_IPI Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 131/677] Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register" Greg Kroah-Hartman
` (553 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Xie He, David S. Miller
From: Xie He <xie.he.0141@gmail.com>
commit d362fd0be456dba2d3d58a90b7a193962776562b upstream.
This reverts commit 1b479fb80160
("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit").
1. This commit is incorrect. "__skb_pad" will NOT free the skb on
failure when its "free_on_error" parameter is "false".
2. This commit claims to fix my commit. But it didn't CC me??
Fixes: 1b479fb80160 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit")
Cc: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wan/hdlc_fr.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -415,7 +415,7 @@ static netdev_tx_t pvc_xmit(struct sk_bu
if (pad > 0) { /* Pad the frame with zeros */
if (__skb_pad(skb, pad, false))
- goto out;
+ goto drop;
skb_put(skb, pad);
}
}
@@ -448,9 +448,8 @@ static netdev_tx_t pvc_xmit(struct sk_bu
return NETDEV_TX_OK;
drop:
- kfree_skb(skb);
-out:
dev->stats.tx_dropped++;
+ kfree_skb(skb);
return NETDEV_TX_OK;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 131/677] Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 130/677] Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit" Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 132/677] mfd: stmpe: Revert "Constify static struct resource" Greg Kroah-Hartman
` (552 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jae Hyun Yoo, Alexandre Belloni
From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
commit 0d95f41ebde40d552bb4fea64b1d618607915fd6 upstream.
Adding the destroy_workqueue call in i3c_master_register introduced below
kernel warning because it makes duplicate destroy_workqueue calls when
i3c_master_register fails after allocating the workqueue. The workqueue will
be destroyed by i3c_masterdev_release which is called by put_device at the
end of the i3c_master_register function eventually in failure cases so the
workqueue doesn't need to be destroyed in i3c_master_register.
[ 6.972952] WARNING: CPU: 1 PID: 1 at lib/list_debug.c:48 __list_del_entry_valid+0x9c/0xf4
[ 6.982205] list_del corruption, 8fe03c08->prev is LIST_POISON2 (00000122)
[ 6.989910] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.10.23-c12838a-dirty-31dc772 #1
[ 7.000295] Hardware name: Generic DT based system
[ 7.005638] Backtrace:
[ 7.008369] [<809133f0>] (dump_backtrace) from [<80913644>] (show_stack+0x20/0x24)
[ 7.016819] r7:00000030 r6:60000013 r5:00000000 r4:813b5d40
[ 7.023137] [<80913624>] (show_stack) from [<8091e1a0>] (dump_stack+0x9c/0xb0)
[ 7.031201] [<8091e104>] (dump_stack) from [<8011fa30>] (__warn+0xf8/0x154)
[ 7.038972] r7:00000030 r6:00000009 r5:804fa1c8 r4:80b6eca4
[ 7.045289] [<8011f938>] (__warn) from [<80913d14>] (warn_slowpath_fmt+0x8c/0xc0)
[ 7.053641] r7:00000030 r6:80b6eca4 r5:80b6ed74 r4:818cc000
[ 7.059960] [<80913c8c>] (warn_slowpath_fmt) from [<804fa1c8>] (__list_del_entry_valid+0x9c/0xf4)
[ 7.069866] r9:96becf8c r8:818cc000 r7:8fe03c10 r6:8fe03c00 r5:8fe03ba0 r4:ff7ead4c
[ 7.078513] [<804fa12c>] (__list_del_entry_valid) from [<8013f0b4>] (destroy_workqueue+0x1c4/0x23c)
[ 7.088615] [<8013eef0>] (destroy_workqueue) from [<806aa124>] (i3c_masterdev_release+0x40/0xb0)
[ 7.098421] r7:00000000 r6:81a43b80 r5:8fe65360 r4:8fe65048
[ 7.104740] [<806aa0e4>] (i3c_masterdev_release) from [<805f3f04>] (device_release+0x40/0xb0)
[ 7.114254] r5:00000000 r4:8fe65048
[ 7.118245] [<805f3ec4>] (device_release) from [<808fe754>] (kobject_put+0xc8/0x204)
[ 7.126885] r5:813978dc r4:8fe65048
[ 7.130877] [<808fe68c>] (kobject_put) from [<805f5fbc>] (put_device+0x20/0x24)
[ 7.139037] r7:8fe65358 r6:8fe65368 r5:8fe65358 r4:8fe65048
[ 7.145355] [<805f5f9c>] (put_device) from [<806abac4>] (i3c_master_register+0x338/0xb00)
[ 7.154487] [<806ab78c>] (i3c_master_register) from [<806ae084>] (dw_i3c_probe+0x224/0x24c)
[ 7.163811] r10:00000000 r9:8fe7a100 r8:00000032 r7:819fa810 r6:819fa800 r5:8fe65040
[ 7.172547] r4:00000000
[ 7.175376] [<806ade60>] (dw_i3c_probe) from [<805fdc14>] (platform_drv_probe+0x44/0x80)
[ 7.184409] r9:813a25c0 r8:00000000 r7:815ec114 r6:00000000 r5:813a25c0 r4:819fa810
[ 7.193053] [<805fdbd0>] (platform_drv_probe) from [<805fb83c>] (really_probe+0x108/0x50c)
[ 7.202275] r5:815ec004 r4:819fa810
[ 7.206265] [<805fb734>] (really_probe) from [<805fc180>] (driver_probe_device+0xb4/0x190)
[ 7.215492] r10:813dc000 r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa810 r5:00000000
[ 7.224228] r4:813a25c0
[ 7.227055] [<805fc0cc>] (driver_probe_device) from [<805fc5cc>] (device_driver_attach+0xb8/0xc0)
[ 7.236959] r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa854 r4:819fa810
[ 7.244439] [<805fc514>] (device_driver_attach) from [<805fc65c>] (__driver_attach+0x88/0x16c)
[ 7.254051] r7:00000000 r6:819fa810 r5:00000000 r4:813a25c0
[ 7.260369] [<805fc5d4>] (__driver_attach) from [<805f954c>] (bus_for_each_dev+0x88/0xc8)
[ 7.269489] r7:00000000 r6:818cc000 r5:805fc5d4 r4:813a25c0
[ 7.275806] [<805f94c4>] (bus_for_each_dev) from [<805fc76c>] (driver_attach+0x2c/0x30)
[ 7.284739] r7:81397c98 r6:00000000 r5:8fe7db80 r4:813a25c0
[ 7.291057] [<805fc740>] (driver_attach) from [<805f9eec>] (bus_add_driver+0x120/0x200)
[ 7.299984] [<805f9dcc>] (bus_add_driver) from [<805fce44>] (driver_register+0x98/0x128)
[ 7.309005] r7:80c4383c r6:00000000 r5:00000000 r4:813a25c0
[ 7.315323] [<805fcdac>] (driver_register) from [<805fedb4>] (__platform_driver_register+0x50/0x58)
[ 7.325410] r5:818cc000 r4:81397c98
[ 7.329404] [<805fed64>] (__platform_driver_register) from [<80c23398>] (dw_i3c_driver_init+0x24/0x28)
[ 7.339790] r5:818cc000 r4:80c23374
[ 7.343784] [<80c23374>] (dw_i3c_driver_init) from [<80c01300>] (do_one_initcall+0xac/0x1d0)
[ 7.353206] [<80c01254>] (do_one_initcall) from [<80c01630>] (kernel_init_freeable+0x1a8/0x204)
[ 7.362916] r8:000000d9 r7:80c4383c r6:00000007 r5:819ca2c0 r4:80c67680
[ 7.370398] [<80c01488>] (kernel_init_freeable) from [<8091eb18>] (kernel_init+0x18/0x12c)
[ 7.379616] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8091eb00
[ 7.388343] r4:00000000
[ 7.391170] [<8091eb00>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
[ 7.399607] Exception stack(0x818cdfb0 to 0x818cdff8)
[ 7.405243] dfa0: 00000000 00000000 00000000 00000000
[ 7.414371] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.423499] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 7.430879] r5:8091eb00 r4:00000000
This reverts commit 59165d16c699182b86b5c65181013f1fd88feb62.
Fixes: 59165d16c699 ("i3c master: fix missing destroy_workqueue() on error in i3c_master_register")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210408172803.24599-1-jae.hyun.yoo@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i3c/master.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -2535,7 +2535,7 @@ int i3c_master_register(struct i3c_maste
ret = i3c_master_bus_init(master);
if (ret)
- goto err_destroy_wq;
+ goto err_put_dev;
ret = device_add(&master->dev);
if (ret)
@@ -2566,9 +2566,6 @@ err_del_dev:
err_cleanup_bus:
i3c_master_bus_cleanup(master);
-err_destroy_wq:
- destroy_workqueue(master->wq);
-
err_put_dev:
put_device(&master->dev);
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 132/677] mfd: stmpe: Revert "Constify static struct resource"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 131/677] Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register" Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 133/677] ovl: fix missing revert_creds() on error path Greg Kroah-Hartman
` (551 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Rikard Falkeborn, Lee Jones
From: Rikard Falkeborn <rikard.falkeborn@gmail.com>
commit cb9e880a797a77c21c0f0e7ccd553da8eb4870af upstream.
In stmpe_devices_init(), the start and end field of these structs are
modified, so they can not be const. Add a comment to those structs that
lacked it to reduce the risk that this happens again.
This reverts commit 8d7b3a6dac4eae22c58b0853696cbd256966741b.
Fixes: 8d7b3a6dac4e ("mfd: stmpe: Constify static struct resource")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mfd/stmpe.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
* GPIO (all variants)
*/
-static const struct resource stmpe_gpio_resources[] = {
+static struct resource stmpe_gpio_resources[] = {
/* Start and end filled dynamically */
{
.flags = IORESOURCE_IRQ,
@@ -336,7 +336,8 @@ static const struct mfd_cell stmpe_gpio_
* Keypad (1601, 2401, 2403)
*/
-static const struct resource stmpe_keypad_resources[] = {
+static struct resource stmpe_keypad_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "KEYPAD",
.flags = IORESOURCE_IRQ,
@@ -357,7 +358,8 @@ static const struct mfd_cell stmpe_keypa
/*
* PWM (1601, 2401, 2403)
*/
-static const struct resource stmpe_pwm_resources[] = {
+static struct resource stmpe_pwm_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "PWM0",
.flags = IORESOURCE_IRQ,
@@ -445,7 +447,8 @@ static struct stmpe_variant_info stmpe80
* Touchscreen (STMPE811 or STMPE610)
*/
-static const struct resource stmpe_ts_resources[] = {
+static struct resource stmpe_ts_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "TOUCH_DET",
.flags = IORESOURCE_IRQ,
@@ -467,7 +470,8 @@ static const struct mfd_cell stmpe_ts_ce
* ADC (STMPE811)
*/
-static const struct resource stmpe_adc_resources[] = {
+static struct resource stmpe_adc_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "STMPE_TEMP_SENS",
.flags = IORESOURCE_IRQ,
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 133/677] ovl: fix missing revert_creds() on error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 132/677] mfd: stmpe: Revert "Constify static struct resource" Greg Kroah-Hartman
@ 2021-05-12 14:42 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 134/677] Revert "drm/qxl: do not run release if qxl failed to init" Greg Kroah-Hartman
` (550 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Miklos Szeredi
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 7b279bbfd2b230c7a210ff8f405799c7e46bbf48 upstream.
Smatch complains about missing that the ovl_override_creds() doesn't
have a matching revert_creds() if the dentry is disconnected. Fix this
by moving the ovl_override_creds() until after the disconnected check.
Fixes: aa3ff3c152ff ("ovl: copy up of disconnected dentries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/overlayfs/copy_up.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -932,7 +932,7 @@ static int ovl_copy_up_one(struct dentry
static int ovl_copy_up_flags(struct dentry *dentry, int flags)
{
int err = 0;
- const struct cred *old_cred = ovl_override_creds(dentry->d_sb);
+ const struct cred *old_cred;
bool disconnected = (dentry->d_flags & DCACHE_DISCONNECTED);
/*
@@ -943,6 +943,7 @@ static int ovl_copy_up_flags(struct dent
if (WARN_ON(disconnected && d_is_dir(dentry)))
return -EIO;
+ old_cred = ovl_override_creds(dentry->d_sb);
while (!err) {
struct dentry *next;
struct dentry *parent = NULL;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 134/677] Revert "drm/qxl: do not run release if qxl failed to init"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2021-05-12 14:42 ` [PATCH 5.12 133/677] ovl: fix missing revert_creds() on error path Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 135/677] usb: gadget: pch_udc: Revert d3cb25a12138 completely Greg Kroah-Hartman
` (549 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tong Zhang, Gerd Hoffmann, Thomas Zimmermann
From: Gerd Hoffmann <kraxel@redhat.com>
commit 93d8da8d7efbf690c0a9eaca798acc0c625245e6 upstream.
This reverts commit b91907a6241193465ca92e357adf16822242296d.
Patch is broken, it effectively makes qxl_drm_release() a nop
because on normal driver shutdown qxl_drm_release() is called
*after* drm_dev_unregister().
Fixes: b91907a62411 ("drm/qxl: do not run release if qxl failed to init")
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-3-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/qxl/qxl_drv.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -144,8 +144,6 @@ static void qxl_drm_release(struct drm_d
* reordering qxl_modeset_fini() + qxl_device_fini() calls is
* non-trivial though.
*/
- if (!dev->registered)
- return;
qxl_modeset_fini(qdev);
qxl_device_fini(qdev);
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 135/677] usb: gadget: pch_udc: Revert d3cb25a12138 completely
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 134/677] Revert "drm/qxl: do not run release if qxl failed to init" Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 136/677] Revert "tools/power turbostat: adjust for temperature offset" Greg Kroah-Hartman
` (548 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Iago Abal, Andy Shevchenko
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
commit 50a318cc9b54a36f00beadf77e578a50f3620477 upstream.
The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a12138 completely.
While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.
Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/pch_udc.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -596,18 +596,22 @@ static void pch_udc_reconnect(struct pch
static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
int is_active)
{
+ unsigned long iflags;
+
+ spin_lock_irqsave(&dev->lock, iflags);
if (is_active) {
pch_udc_reconnect(dev);
dev->vbus_session = 1;
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_lock(&dev->lock);
+ spin_unlock_irqrestore(&dev->lock, iflags);
dev->driver->disconnect(&dev->gadget);
- spin_unlock(&dev->lock);
+ spin_lock_irqsave(&dev->lock, iflags);
}
pch_udc_set_disconnect(dev);
dev->vbus_session = 0;
}
+ spin_unlock_irqrestore(&dev->lock, iflags);
}
/**
@@ -1166,20 +1170,25 @@ static int pch_udc_pcd_selfpowered(struc
static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
{
struct pch_udc_dev *dev;
+ unsigned long iflags;
if (!gadget)
return -EINVAL;
+
dev = container_of(gadget, struct pch_udc_dev, gadget);
+
+ spin_lock_irqsave(&dev->lock, iflags);
if (is_on) {
pch_udc_reconnect(dev);
} else {
if (dev->driver && dev->driver->disconnect) {
- spin_lock(&dev->lock);
+ spin_unlock_irqrestore(&dev->lock, iflags);
dev->driver->disconnect(&dev->gadget);
- spin_unlock(&dev->lock);
+ spin_lock_irqsave(&dev->lock, iflags);
}
pch_udc_set_disconnect(dev);
}
+ spin_unlock_irqrestore(&dev->lock, iflags);
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 136/677] Revert "tools/power turbostat: adjust for temperature offset"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 135/677] usb: gadget: pch_udc: Revert d3cb25a12138 completely Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 137/677] firmware: xilinx: Fix dereferencing freed memory Greg Kroah-Hartman
` (547 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Len Brown
From: Len Brown <len.brown@intel.com>
commit b2b94be787bf47eedd5890a249f3318bf9f1f1d5 upstream.
This reverts commit 6ff7cb371c4bea3dba03a56d774da925e78a5087.
Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.
(on most systems, TCC offset is 0, FWIW)
Fixes: 6ff7cb371c4b
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/power/x86/turbostat/turbostat.c | 62 ++++++++++++++++++----------------
1 file changed, 33 insertions(+), 29 deletions(-)
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -4822,33 +4822,12 @@ double discover_bclk(unsigned int family
* below this value, including the Digital Thermal Sensor (DTS),
* Package Thermal Management Sensor (PTM), and thermal event thresholds.
*/
-int read_tcc_activation_temp()
+int set_temperature_target(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
unsigned long long msr;
- unsigned int tcc, target_c, offset_c;
-
- /* Temperature Target MSR is Nehalem and newer only */
- if (!do_nhm_platform_info)
- return 0;
-
- if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr))
- return 0;
+ unsigned int target_c_local;
+ int cpu;
- target_c = (msr >> 16) & 0xFF;
-
- offset_c = (msr >> 24) & 0xF;
-
- tcc = target_c - offset_c;
-
- if (!quiet)
- fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C) (%d default - %d offset)\n",
- base_cpu, msr, tcc, target_c, offset_c);
-
- return tcc;
-}
-
-int set_temperature_target(struct thread_data *t, struct core_data *c, struct pkg_data *p)
-{
/* tcc_activation_temp is used only for dts or ptm */
if (!(do_dts || do_ptm))
return 0;
@@ -4857,18 +4836,43 @@ int set_temperature_target(struct thread
if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
return 0;
+ cpu = t->cpu_id;
+ if (cpu_migrate(cpu)) {
+ fprintf(outf, "Could not migrate to CPU %d\n", cpu);
+ return -1;
+ }
+
if (tcc_activation_temp_override != 0) {
tcc_activation_temp = tcc_activation_temp_override;
- fprintf(outf, "Using cmdline TCC Target (%d C)\n", tcc_activation_temp);
+ fprintf(outf, "cpu%d: Using cmdline TCC Target (%d C)\n",
+ cpu, tcc_activation_temp);
return 0;
}
- tcc_activation_temp = read_tcc_activation_temp();
- if (tcc_activation_temp)
- return 0;
+ /* Temperature Target MSR is Nehalem and newer only */
+ if (!do_nhm_platform_info)
+ goto guess;
+
+ if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr))
+ goto guess;
+
+ target_c_local = (msr >> 16) & 0xFF;
+
+ if (!quiet)
+ fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n",
+ cpu, msr, target_c_local);
+
+ if (!target_c_local)
+ goto guess;
+
+ tcc_activation_temp = target_c_local;
+
+ return 0;
+guess:
tcc_activation_temp = TJMAX_DEFAULT;
- fprintf(outf, "Guessing tjMax %d C, Please use -T to specify\n", tcc_activation_temp);
+ fprintf(outf, "cpu%d: Guessing tjMax %d C, Please use -T to specify\n",
+ cpu, tcc_activation_temp);
return 0;
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 137/677] firmware: xilinx: Fix dereferencing freed memory
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 136/677] Revert "tools/power turbostat: adjust for temperature offset" Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 138/677] firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE) Greg Kroah-Hartman
` (546 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Tejas Patel, Rajan Vaja, Michal Simek, Sasha Levin
From: Tejas Patel <tejas.patel@xilinx.com>
[ Upstream commit f1f21bece82c76a56a96988ec7d51ccc033d8949 ]
Fix smatch warning:
drivers/firmware/xilinx/zynqmp.c:1288 zynqmp_firmware_remove()
error: dereferencing freed memory 'feature_data'
Use hash_for_each_safe for safe removal of hash entry.
Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/1612765883-22018-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/xilinx/zynqmp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7eb9958662dd..83082e2f2e44 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -2,7 +2,7 @@
/*
* Xilinx Zynq MPSoC Firmware layer
*
- * Copyright (C) 2014-2020 Xilinx, Inc.
+ * Copyright (C) 2014-2021 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
* Davorin Mista <davorin.mista@aggios.com>
@@ -1280,12 +1280,13 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)
static int zynqmp_firmware_remove(struct platform_device *pdev)
{
struct pm_api_feature_data *feature_data;
+ struct hlist_node *tmp;
int i;
mfd_remove_devices(&pdev->dev);
zynqmp_pm_api_debugfs_exit();
- hash_for_each(pm_api_features_map, i, feature_data, hentry) {
+ hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) {
hash_del(&feature_data->hentry);
kfree(feature_data);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 138/677] firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 137/677] firmware: xilinx: Fix dereferencing freed memory Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 139/677] x86/vdso: Use proper modifier for lens format specifier in extract() Greg Kroah-Hartman
` (545 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nobuhiro Iwamatsu, Michal Simek, Sasha Levin
From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
[ Upstream commit 79bfe480a0a0b259ab9fddcd2fe52c03542b1196 ]
zynqmp_pm_get_eemi_ops() was removed in commit 4db8180ffe7c: "Firmware: xilinx:
Remove eemi ops for fpga related APIs", but not in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE).
Any driver who want to communicate with PMC using EEMI APIs use the functions provided
for each function
This removed zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE), and also
modify the documentation for this driver.
Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20210215155849.2425846-1-iwamatsu@nigauri.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/driver-api/xilinx/eemi.rst | 31 ++----------------------
include/linux/firmware/xlnx-zynqmp.h | 5 ----
2 files changed, 2 insertions(+), 34 deletions(-)
diff --git a/Documentation/driver-api/xilinx/eemi.rst b/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- a/Documentation/driver-api/xilinx/eemi.rst
+++ b/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
device to communicate with a power management controller (PMC) on a
device to issue or respond to power management requests.
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
- /* zynqmp-firmware driver maintain all EEMI APIs */
- struct zynqmp_eemi_ops {
- int (*get_api_version)(u32 *version);
- int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
- };
-
- static const struct zynqmp_eemi_ops eemi_ops = {
- .get_api_version = zynqmp_pm_get_api_version,
- .query_data = zynqmp_pm_query_data,
- };
-
-Example of EEMI ops usage::
-
- static const struct zynqmp_eemi_ops *eemi_ops;
- u32 ret_payload[PAYLOAD_ARG_CNT];
- int ret;
-
- eemi_ops = zynqmp_pm_get_eemi_ops();
- if (IS_ERR(eemi_ops))
- return PTR_ERR(eemi_ops);
-
- ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
IOCTL
------
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 71177b17eee5..66e2423d9feb 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -354,11 +354,6 @@ int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
#else
-static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
-{
- return ERR_PTR(-ENODEV);
-}
-
static inline int zynqmp_pm_get_api_version(u32 *version)
{
return -ENODEV;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 139/677] x86/vdso: Use proper modifier for lens format specifier in extract()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 138/677] firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE) Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 140/677] fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER Greg Kroah-Hartman
` (544 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Borislav Petkov,
Jarkko Sakkinen, Sasha Levin
From: Jiri Slaby <jslaby@suse.cz>
[ Upstream commit 70c9d959226b7c5c48c119e2c1cfc1424f87b023 ]
Commit
8382c668ce4f ("x86/vdso: Add support for exception fixup in vDSO functions")
prints length "len" which is size_t.
Compilers now complain when building on a 32-bit host:
HOSTCC arch/x86/entry/vdso/vdso2c
...
In file included from arch/x86/entry/vdso/vdso2c.c:162:
arch/x86/entry/vdso/vdso2c.h: In function 'extract64':
arch/x86/entry/vdso/vdso2c.h:38:52: warning: format '%lu' expects argument of \
type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'}
So use proper modifier (%zu) for size_t.
[ bp: Massage commit message. ]
Fixes: 8382c668ce4f ("x86/vdso: Add support for exception fixup in vDSO functions")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210303064357.17056-1-jslaby@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/entry/vdso/vdso2c.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/entry/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index 1c7cfac7e64a..5264daa8859f 100644
--- a/arch/x86/entry/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
@@ -35,7 +35,7 @@ static void BITSFUNC(extract)(const unsigned char *data, size_t data_len,
if (offset + len > data_len)
fail("section to extract overruns input data");
- fprintf(outfile, "static const unsigned char %s[%lu] = {", name, len);
+ fprintf(outfile, "static const unsigned char %s[%zu] = {", name, len);
BITSFUNC(copy)(outfile, data + offset, len);
fprintf(outfile, "\n};\n\n");
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 140/677] fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 139/677] x86/vdso: Use proper modifier for lens format specifier in extract() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 141/677] crypto: keembay-ocs-hcu - Fix error return code in kmb_ocs_hcu_probe() Greg Kroah-Hartman
` (543 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luca Ceresoli, Moritz Fischer, Sasha Levin
From: Luca Ceresoli <luca@lucaceresoli.net>
[ Upstream commit 484a58607a808c3721917f5ca5fba7eff809e4df ]
The current code produces an error message on devm_gpiod_get() errors even
when the error is -EPROBE_DEFER, which should be silent.
This has been observed producing a significant amount of messages like:
xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517
Fix and simplify code by using the dev_err_probe() helper function.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/fpga/xilinx-spi.c | 24 +++++++++---------------
1 file changed, 9 insertions(+), 15 deletions(-)
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index 27defa98092d..fee4d0abf6bf 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -233,25 +233,19 @@ static int xilinx_spi_probe(struct spi_device *spi)
/* PROGRAM_B is active low */
conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
- if (IS_ERR(conf->prog_b)) {
- dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
- PTR_ERR(conf->prog_b));
- return PTR_ERR(conf->prog_b);
- }
+ if (IS_ERR(conf->prog_b))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b),
+ "Failed to get PROGRAM_B gpio\n");
conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
- if (IS_ERR(conf->init_b)) {
- dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n",
- PTR_ERR(conf->init_b));
- return PTR_ERR(conf->init_b);
- }
+ if (IS_ERR(conf->init_b))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b),
+ "Failed to get INIT_B gpio\n");
conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
- if (IS_ERR(conf->done)) {
- dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
- PTR_ERR(conf->done));
- return PTR_ERR(conf->done);
- }
+ if (IS_ERR(conf->done))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->done),
+ "Failed to get DONE gpio\n");
mgr = devm_fpga_mgr_create(&spi->dev,
"Xilinx Slave Serial FPGA Manager",
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 141/677] crypto: keembay-ocs-hcu - Fix error return code in kmb_ocs_hcu_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 140/677] fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 142/677] crypto: keembay-ocs-aes - Fix error return code in kmb_ocs_aes_probe() Greg Kroah-Hartman
` (542 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Daniele Alessandrelli, Herbert Xu, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 662c1c5618aaf71f99ada3105b99668a503605ae ]
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 472b04444cd3 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/keembay/keembay-ocs-hcu-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/keembay/keembay-ocs-hcu-core.c b/drivers/crypto/keembay/keembay-ocs-hcu-core.c
index c4b97b4160e9..322c51a6936f 100644
--- a/drivers/crypto/keembay/keembay-ocs-hcu-core.c
+++ b/drivers/crypto/keembay/keembay-ocs-hcu-core.c
@@ -1220,8 +1220,10 @@ static int kmb_ocs_hcu_probe(struct platform_device *pdev)
/* Initialize crypto engine */
hcu_dev->engine = crypto_engine_alloc_init(dev, 1);
- if (!hcu_dev->engine)
+ if (!hcu_dev->engine) {
+ rc = -ENOMEM;
goto list_del;
+ }
rc = crypto_engine_start(hcu_dev->engine);
if (rc) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 142/677] crypto: keembay-ocs-aes - Fix error return code in kmb_ocs_aes_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 141/677] crypto: keembay-ocs-hcu - Fix error return code in kmb_ocs_hcu_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 143/677] crypto: sun8i-ss - fix result memory leak on error path Greg Kroah-Hartman
` (541 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Daniele Alessandrelli, Herbert Xu, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 2eee428d8212265af09d349b74746be03513382e ]
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 885743324513 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/keembay/keembay-ocs-aes-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/keembay/keembay-ocs-aes-core.c b/drivers/crypto/keembay/keembay-ocs-aes-core.c
index b6b25d994af3..2ef312866338 100644
--- a/drivers/crypto/keembay/keembay-ocs-aes-core.c
+++ b/drivers/crypto/keembay/keembay-ocs-aes-core.c
@@ -1649,8 +1649,10 @@ static int kmb_ocs_aes_probe(struct platform_device *pdev)
/* Initialize crypto engine */
aes_dev->engine = crypto_engine_alloc_init(dev, true);
- if (!aes_dev->engine)
+ if (!aes_dev->engine) {
+ rc = -ENOMEM;
goto list_del;
+ }
rc = crypto_engine_start(aes_dev->engine);
if (rc) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 143/677] crypto: sun8i-ss - fix result memory leak on error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 142/677] crypto: keembay-ocs-aes - Fix error return code in kmb_ocs_aes_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 144/677] memory: gpmc: fix out of bounds read and dereference on gpmc_cs[] Greg Kroah-Hartman
` (540 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Corentin Labbe, Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe.montjoie@gmail.com>
[ Upstream commit 1dbc6a1e25be8575d6c4114d1d2b841a796507f7 ]
This patch fixes a memory leak on an error path.
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
index 11cbcbc83a7b..0b9aa24a5edd 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
@@ -438,8 +438,8 @@ int sun8i_ss_hash_run(struct crypto_engine *engine, void *breq)
kfree(pad);
memcpy(areq->result, result, algt->alg.hash.halg.digestsize);
- kfree(result);
theend:
+ kfree(result);
crypto_finalize_hash_request(engine, breq, err);
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 144/677] memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 143/677] crypto: sun8i-ss - fix result memory leak on error path Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 145/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 Greg Kroah-Hartman
` (539 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Tony Lindgren,
Krzysztof Kozlowski, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit e004c3e67b6459c99285b18366a71af467d869f5 ]
Currently the array gpmc_cs is indexed by cs before it cs is range checked
and the pointer read from this out-of-index read is dereferenced. Fix this
by performing the range check on cs before the read and the following
pointer dereference.
Addresses-Coverity: ("Negative array index read")
Fixes: 9ed7a776eb50 ("ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210223193821.17232-1-colin.king@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memory/omap-gpmc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index cfa730cfd145..f80c2ea39ca4 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1009,8 +1009,8 @@ EXPORT_SYMBOL(gpmc_cs_request);
void gpmc_cs_free(int cs)
{
- struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
- struct resource *res = &gpmc->mem;
+ struct gpmc_cs_data *gpmc;
+ struct resource *res;
spin_lock(&gpmc_mem_lock);
if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
@@ -1018,6 +1018,9 @@ void gpmc_cs_free(int cs)
spin_unlock(&gpmc_mem_lock);
return;
}
+ gpmc = &gpmc_cs[cs];
+ res = &gpmc->mem;
+
gpmc_cs_disable_mem(cs);
if (res->flags)
release_resource(res);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 145/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 144/677] memory: gpmc: fix out of bounds read and dereference on gpmc_cs[] Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 146/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family Greg Kroah-Hartman
` (538 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 46799802136670e00498f19898f1635fbc85f583 ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4210-i9100.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 304a8ee2364c..d98c78207aaf 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -136,7 +136,7 @@
compatible = "maxim,max17042";
interrupt-parent = <&gpx2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max17042_fuel_irq>;
pinctrl-names = "default";
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 146/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 145/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 147/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family Greg Kroah-Hartman
` (537 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit c731a16e2cf424a462c7d42c33d6acd613576508 ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: f48b5050c301 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-p4note.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b2f9d5448a18..5fe371543cbb 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -146,7 +146,7 @@
pinctrl-0 = <&fuel_alert_irq>;
pinctrl-names = "default";
interrupt-parent = <&gpx2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
maxim,rsns-microohm = <10000>;
maxim,over-heat-temp = <600>;
maxim,over-volt = <4300>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 147/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 146/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 148/677] ARM: dts: exynos: correct MUIC " Greg Kroah-Hartman
` (536 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 8a45f33bd36efbb624198cfa9fdf1f66fd1c3d26 ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: e8614292cd41 ("ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 111c32bae02c..b8b75dc81aa1 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -221,7 +221,7 @@
fuel-gauge@36 {
compatible = "maxim,max17047";
interrupt-parent = <&gpx2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_fuel_irq>;
reg = <0x36>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 148/677] ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 147/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 149/677] ARM: dts: exynos: correct PMIC " Greg Kroah-Hartman
` (535 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 15107e443ab8c6cb35eff10438993e4bc944d9ae ]
The Maxim MUIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index b8b75dc81aa1..d75f554efde0 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -173,7 +173,7 @@
pmic@66 {
compatible = "maxim,max77693";
interrupt-parent = <&gpx1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_irq>;
reg = <0x66>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 149/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 148/677] ARM: dts: exynos: correct MUIC " Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 150/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family Greg Kroah-Hartman
` (534 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit e52dcd6e70fab51f53292e53336ecb007bb60889 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 15dfdfad2d4a ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index d75f554efde0..fc77c1bfd844 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -665,7 +665,7 @@
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
reg = <0x09>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 150/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (148 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 149/677] ARM: dts: exynos: correct PMIC " Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 151/677] ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family Greg Kroah-Hartman
` (533 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 6503c568e97a52f8b7a3109718db438e52e59485 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: eea6653aae7b ("ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2b20d9095d9f..eebe6a3952ce 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -278,7 +278,7 @@
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
reg = <0x09>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 151/677] ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (149 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 150/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 152/677] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 Greg Kroah-Hartman
` (532 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit fbe9c9bb2e929865500a0985735f81c0142accad ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: f48b5050c301 ("ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos4412-p4note.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 5fe371543cbb..9e750890edb8 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -322,7 +322,7 @@
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
reg = <0x09>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 152/677] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (150 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 151/677] ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 153/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Snow Greg Kroah-Hartman
` (531 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit f6368c60561370e4a92fac22982a3bd656172170 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8b5a79a8720c..39bbe18145cf 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
#clock-cells = <1>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 153/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (151 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 152/677] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 154/677] ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family Greg Kroah-Hartman
` (530 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 8987efbb17c2522be8615085df9a14da2ab53d34 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: c61248afa819 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 6635f6184051..2335c4687349 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 154/677] ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (152 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 153/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Snow Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 155/677] ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files Greg Kroah-Hartman
` (529 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 214e6ec8c9f5a3353d3282b3ff475d3ee86cc21a ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: 99bb20321f0e ("ARM: dts: s5pv210: Correct fuelgauge definition on Aries")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-10-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ca064359dd30..b47d8300e536 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -115,7 +115,7 @@
compatible = "maxim,max77836-battery";
interrupt-parent = <&gph3>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fg_irq>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 155/677] ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (153 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 154/677] ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 156/677] arm64: dts: renesas: Add mmc aliases into " Greg Kroah-Hartman
` (528 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda,
Geert Uytterhoeven, Sasha Levin
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit da926e813fc7f9f0912fa413981a1f5ba63a536d ]
After set PROBE_PREFER_ASYNCHRONOUS flag on the mmc host drivers,
the order of /dev/mmcblkN was not fixed in some SoCs which have
multiple SDHI and/or MMCIF controllers. So, we were hard to use
such a device as rootfs by using the kernel parameter like
"root=/dev/mmcblkNpM".
According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into R-Car Gen2
board dts files. Note that, since R-Car Gen2 is even more complicated
about SDHI and/or MMCIF channels variations and they share pins,
add the aliases into board dts files instead of SoC dtsi files.
[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/
Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1613131316-30994-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/r8a7790-lager.dts | 3 +++
arch/arm/boot/dts/r8a7791-koelsch.dts | 3 +++
arch/arm/boot/dts/r8a7791-porter.dts | 2 ++
arch/arm/boot/dts/r8a7793-gose.dts | 3 +++
arch/arm/boot/dts/r8a7794-alt.dts | 3 +++
arch/arm/boot/dts/r8a7794-silk.dts | 2 ++
6 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..1d6f0c5d02e9 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
i2c11 = &i2cexio1;
i2c12 = &i2chdmi;
i2c13 = &i2cpwr;
+ mmc0 = &mmcif1;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..6af1727b8269 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
i2c12 = &i2cexio1;
i2c13 = &i2chdmi;
i2c14 = &i2cexio4;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi1;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..bf51e29c793a 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
serial0 = &scif0;
i2c9 = &gpioi2c2;
i2c10 = &i2chdmi;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi2;
};
chosen {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..2b59a0491350 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
i2c10 = &gpioi2c4;
i2c11 = &i2chdmi;
i2c12 = &i2cexio4;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi1;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..32025986b3b9 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -19,6 +19,9 @@
i2c10 = &gpioi2c4;
i2c11 = &i2chdmi;
i2c12 = &i2cexio4;
+ mmc0 = &mmcif0;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi1;
};
chosen {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 677596f6c9c9..af066ee5e275 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
serial0 = &scif2;
i2c9 = &gpioi2c1;
i2c10 = &i2chdmi;
+ mmc0 = &mmcif0;
+ mmc1 = &sdhi1;
};
chosen {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 156/677] arm64: dts: renesas: Add mmc aliases into board dts files
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (154 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 155/677] ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 157/677] bus: ti-sysc: Fix initializing module_pa for modules without sysc register Greg Kroah-Hartman
` (527 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda,
Geert Uytterhoeven, Sasha Levin
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit d765a4f302cc046ca23453ba990d21120ceadbbd ]
After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in v4.14"), the order of /dev/mmcblkN
was not fixed in some SoCs which have multiple sdhi controllers.
So, we were hard to use an sdhi device as rootfs by using
the kernel parameter like "root=/dev/mmcblkNpM".
According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into Renesas
arm64 board dts files. Notes that mmc0 is an eMMC channel if
available.
[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/
Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 3 +++
arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts | 3 +++
arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts | 3 +++
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 2 ++
arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts | 3 +++
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 3 +++
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 3 +++
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1 +
arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++
9 files changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 7a3da9b06f67..0c7e6f790590 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -12,6 +12,9 @@
aliases {
serial0 = &scif2;
serial1 = &hscif0;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
index 501cb05da228..3cf2e076940f 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -21,6 +21,9 @@
serial4 = &hscif2;
serial5 = &scif5;
ethernet0 = &avb;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
index 71763f4402a7..3c0d59def8ee 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -22,6 +22,9 @@
serial5 = &scif5;
serial6 = &scif4;
ethernet0 = &avb;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index ea87cb5a459c..33257c6440b2 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -17,6 +17,8 @@
aliases {
serial0 = &scif2;
serial1 = &hscif2;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi3;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
index 273f062f2909..7b6649a3ded0 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -22,6 +22,9 @@
serial5 = &scif5;
serial6 = &scif4;
ethernet0 = &avb;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index f74f8b9993f1..6d6cdc4c324b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -16,6 +16,9 @@
aliases {
serial0 = &scif2;
ethernet0 = &avb;
+ mmc0 = &sdhi3;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi1;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index c22bb38994e8..15bb1eeb6601 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -36,6 +36,9 @@
serial0 = &scif2;
serial1 = &hscif1;
ethernet0 = &avb;
+ mmc0 = &sdhi2;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi3;
};
chosen {
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index e9ed2597f1c2..61bd4df09df0 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -16,6 +16,7 @@
aliases {
serial1 = &hscif0;
serial2 = &scif1;
+ mmc2 = &sdhi3;
};
clksndsel: clksndsel {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a04eae55dd6c..3d88e95c65a5 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -23,6 +23,8 @@
aliases {
serial0 = &scif2;
ethernet0 = &avb;
+ mmc0 = &sdhi2;
+ mmc1 = &sdhi0;
};
chosen {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 157/677] bus: ti-sysc: Fix initializing module_pa for modules without sysc register
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (155 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 156/677] arm64: dts: renesas: Add mmc aliases into " Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 158/677] x86/platform/uv: Set section block size for hubless architectures Greg Kroah-Hartman
` (526 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tony Lindgren, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit 7bad5af826aba00487fed9a3300d3f43f0cba11b ]
We have interconnect target modules with no known registers using only
clocks and resets, but we still want to detect them based on the module
IO range. So let's call sysc_parse_and_check_child_range() earlier so we
have module_pa properly initialized.
Fixes: 2928135c93f8 ("bus: ti-sysc: Support modules without control registers")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bus/ti-sysc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 9e535336689f..68145e326eb9 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -901,9 +901,6 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
struct device_node *np = ddata->dev->of_node;
int error;
- if (!of_get_property(np, "reg", NULL))
- return 0;
-
error = sysc_parse_and_check_child_range(ddata);
if (error)
return error;
@@ -914,6 +911,9 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
sysc_check_children(ddata);
+ if (!of_get_property(np, "reg", NULL))
+ return 0;
+
error = sysc_parse_registers(ddata);
if (error)
return error;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 158/677] x86/platform/uv: Set section block size for hubless architectures
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (156 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 157/677] bus: ti-sysc: Fix initializing module_pa for modules without sysc register Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 159/677] serial: stm32: fix probe and remove order for dma Greg Kroah-Hartman
` (525 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Travis, Borislav Petkov,
Steve Wahl, Russ Anderson, Sasha Levin
From: Mike Travis <mike.travis@hpe.com>
[ Upstream commit 6840a150b9daf35e4d21ab9780d0a03b4ed74a5b ]
Commit
bbbd2b51a2aa ("x86/platform/UV: Use new set memory block size function")
added a call to set the block size value that is needed by the kernel
to set the boundaries in the section list. This was done for UV Hubbed
systems but missed in the UV Hubless setup. Fix that mistake by adding
that same set call for hubless systems, which support the same NVRAMs
and Intel BIOS, thus the same problem occurs.
[ bp: Massage commit message. ]
Fixes: bbbd2b51a2aa ("x86/platform/UV: Use new set memory block size function")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20210305162853.299892-1-mike.travis@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/apic/x2apic_uv_x.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 52bc217ca8c3..c9ddd233e32f 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -1671,6 +1671,9 @@ static __init int uv_system_init_hubless(void)
if (rc < 0)
return rc;
+ /* Set section block size for current node memory */
+ set_block_size();
+
/* Create user access node */
if (rc >= 0)
uv_setup_proc_files(1);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 159/677] serial: stm32: fix probe and remove order for dma
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (157 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 158/677] x86/platform/uv: Set section block size for hubless architectures Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 160/677] serial: stm32: fix startup by enabling usart for reception Greg Kroah-Hartman
` (524 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 87fd0741d6dcf63ebdb14050c2b921ae14c7f307 ]
The probe and remove orders are wrong as the uart_port is registered
before saving device data in the probe, and unregistered after DMA
resource deallocation in the remove. uart_port registering should be
done at the end of probe and unregistering should be done at the begin of
remove to avoid resource allocation issues.
Fix probe and remove orders. This enforce resource allocation occur at
proper time.
Terminate both DMA rx and tx transfers before removing device.
Move pm_runtime after uart_remove_one_port() call in remove() to keep the
probe error path.
Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 57 ++++++++++++++++++++++++--------
1 file changed, 44 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index b3675cf25a69..3d58824ac2af 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1252,10 +1252,6 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
device_set_wakeup_enable(&pdev->dev, false);
}
- ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
- if (ret)
- goto err_wirq;
-
ret = stm32_usart_of_dma_rx_probe(stm32port, pdev);
if (ret)
dev_info(&pdev->dev, "interrupt mode used for rx (no dma)\n");
@@ -1269,11 +1265,40 @@ static int stm32_usart_serial_probe(struct platform_device *pdev)
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+
+ ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
+ if (ret)
+ goto err_port;
+
pm_runtime_put_sync(&pdev->dev);
return 0;
-err_wirq:
+err_port:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
+ if (stm32port->rx_ch) {
+ dmaengine_terminate_async(stm32port->rx_ch);
+ dma_release_channel(stm32port->rx_ch);
+ }
+
+ if (stm32port->rx_dma_buf)
+ dma_free_coherent(&pdev->dev,
+ RX_BUF_L, stm32port->rx_buf,
+ stm32port->rx_dma_buf);
+
+ if (stm32port->tx_ch) {
+ dmaengine_terminate_async(stm32port->tx_ch);
+ dma_release_channel(stm32port->tx_ch);
+ }
+
+ if (stm32port->tx_dma_buf)
+ dma_free_coherent(&pdev->dev,
+ TX_BUF_L, stm32port->tx_buf,
+ stm32port->tx_dma_buf);
+
if (stm32port->wakeirq > 0)
dev_pm_clear_wake_irq(&pdev->dev);
@@ -1295,11 +1320,20 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
int err;
pm_runtime_get_sync(&pdev->dev);
+ err = uart_remove_one_port(&stm32_usart_driver, port);
+ if (err)
+ return(err);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAR);
- if (stm32_port->rx_ch)
+ if (stm32_port->rx_ch) {
+ dmaengine_terminate_async(stm32_port->rx_ch);
dma_release_channel(stm32_port->rx_ch);
+ }
if (stm32_port->rx_dma_buf)
dma_free_coherent(&pdev->dev,
@@ -1308,8 +1342,10 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
- if (stm32_port->tx_ch)
+ if (stm32_port->tx_ch) {
+ dmaengine_terminate_async(stm32_port->tx_ch);
dma_release_channel(stm32_port->tx_ch);
+ }
if (stm32_port->tx_dma_buf)
dma_free_coherent(&pdev->dev,
@@ -1323,12 +1359,7 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
stm32_usart_deinit_port(stm32_port);
- err = uart_remove_one_port(&stm32_usart_driver, port);
-
- pm_runtime_disable(&pdev->dev);
- pm_runtime_put_noidle(&pdev->dev);
-
- return err;
+ return 0;
}
#ifdef CONFIG_SERIAL_STM32_CONSOLE
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 160/677] serial: stm32: fix startup by enabling usart for reception
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (158 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 159/677] serial: stm32: fix probe and remove order for dma Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 161/677] serial: stm32: fix incorrect characters on console Greg Kroah-Hartman
` (523 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit f4518a8a75f5be1a121b0c95ad9c6b1eb27d920e ]
RX is configured, but usart is not enabled in startup function.
Kernel documentation specifies that startup should enable the port for
reception.
Fix the startup by enabling usart for reception.
Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 3d58824ac2af..c6ca8f964c69 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -634,6 +634,7 @@ static int stm32_usart_startup(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ const struct stm32_usart_config *cfg = &stm32_port->info->cfg;
const char *name = to_platform_device(port->dev)->name;
u32 val;
int ret;
@@ -658,7 +659,7 @@ static int stm32_usart_startup(struct uart_port *port)
}
/* RX FIFO enabling */
- val = stm32_port->cr1_irq | USART_CR1_RE;
+ val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit);
if (stm32_port->fifoen)
val |= USART_CR1_FIFOEN;
stm32_usart_set_bits(port, ofs->cr1, val);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 161/677] serial: stm32: fix incorrect characters on console
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (159 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 160/677] serial: stm32: fix startup by enabling usart for reception Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 162/677] serial: stm32: fix TX and RX FIFO thresholds Greg Kroah-Hartman
` (522 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit f264c6f6aece81a9f8fbdf912b20bd3feb476a7a ]
Incorrect characters are observed on console during boot. This issue occurs
when init/main.c is modifying termios settings to open /dev/console on the
rootfs.
This patch adds a waiting loop in set_termios to wait for TX shift register
empty (and TX FIFO if any) before stopping serial port.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index c6ca8f964c69..eae54b8cf5e2 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -738,8 +738,9 @@ static void stm32_usart_set_termios(struct uart_port *port,
unsigned int baud, bits;
u32 usartdiv, mantissa, fraction, oversampling;
tcflag_t cflag = termios->c_cflag;
- u32 cr1, cr2, cr3;
+ u32 cr1, cr2, cr3, isr;
unsigned long flags;
+ int ret;
if (!stm32_port->hw_flow_control)
cflag &= ~CRTSCTS;
@@ -748,6 +749,15 @@ static void stm32_usart_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
+ ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TC),
+ 10, 100000);
+
+ /* Send the TC error message only when ISR_TC is not set. */
+ if (ret)
+ dev_err(port->dev, "Transmission is not complete\n");
+
/* Stop serial port and reset value */
writel_relaxed(0, port->membase + ofs->cr1);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 162/677] serial: stm32: fix TX and RX FIFO thresholds
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (160 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 161/677] serial: stm32: fix incorrect characters on console Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 163/677] serial: stm32: fix a deadlock condition with wakeup event Greg Kroah-Hartman
` (521 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 25a8e7611da5513b388165661b17173c26e12c04 ]
TX and RX FIFO thresholds may be cleared after suspend/resume, depending
on the low power mode.
Those configurations (done in startup) are not effective for UART console,
as:
- the reference manual indicates that FIFOEN bit can only be written when
the USART is disabled (UE=0)
- a set_termios (where UE is set) is requested firstly for console
enabling, before the startup.
Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-5-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index eae54b8cf5e2..223cec70c57c 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -649,19 +649,8 @@ static int stm32_usart_startup(struct uart_port *port)
if (ofs->rqr != UNDEF_REG)
stm32_usart_set_bits(port, ofs->rqr, USART_RQR_RXFRQ);
- /* Tx and RX FIFO configuration */
- if (stm32_port->fifoen) {
- val = readl_relaxed(port->membase + ofs->cr3);
- val &= ~(USART_CR3_TXFTCFG_MASK | USART_CR3_RXFTCFG_MASK);
- val |= USART_CR3_TXFTCFG_HALF << USART_CR3_TXFTCFG_SHIFT;
- val |= USART_CR3_RXFTCFG_HALF << USART_CR3_RXFTCFG_SHIFT;
- writel_relaxed(val, port->membase + ofs->cr3);
- }
-
- /* RX FIFO enabling */
+ /* RX enabling */
val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit);
- if (stm32_port->fifoen)
- val |= USART_CR1_FIFOEN;
stm32_usart_set_bits(port, ofs->cr1, val);
return 0;
@@ -770,9 +759,15 @@ static void stm32_usart_set_termios(struct uart_port *port,
if (stm32_port->fifoen)
cr1 |= USART_CR1_FIFOEN;
cr2 = 0;
+
+ /* Tx and RX FIFO configuration */
cr3 = readl_relaxed(port->membase + ofs->cr3);
- cr3 &= USART_CR3_TXFTIE | USART_CR3_RXFTCFG_MASK | USART_CR3_RXFTIE
- | USART_CR3_TXFTCFG_MASK;
+ cr3 &= USART_CR3_TXFTIE | USART_CR3_RXFTIE;
+ if (stm32_port->fifoen) {
+ cr3 &= ~(USART_CR3_TXFTCFG_MASK | USART_CR3_RXFTCFG_MASK);
+ cr3 |= USART_CR3_TXFTCFG_HALF << USART_CR3_TXFTCFG_SHIFT;
+ cr3 |= USART_CR3_RXFTCFG_HALF << USART_CR3_RXFTCFG_SHIFT;
+ }
if (cflag & CSTOPB)
cr2 |= USART_CR2_STOP_2B;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 163/677] serial: stm32: fix a deadlock condition with wakeup event
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (161 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 162/677] serial: stm32: fix TX and RX FIFO thresholds Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 164/677] serial: stm32: fix wake-up flag handling Greg Kroah-Hartman
` (520 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Fabrice Gasnier, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit ad7676812437a00a4c6be155fc17926069f99084 ]
Deadlock issue is seen when enabling CONFIG_PROVE_LOCKING=Y, and uart
console as wakeup source. Deadlock occurs when resuming from low power
mode if system is waked up via usart console.
The deadlock is triggered 100% when also disabling console suspend prior
to go to suspend.
Simplified call stack, deadlock condition:
- stm32_console_write <-- spin_lock already held
- print_circular_bug
- pm_wakeup_dev_event <-- triggers lockdep as seen above
- stm32_receive_chars
- stm32_interrupt <-- wakeup via uart console, takes the lock
So, revisit spin_lock in stm32-usart driver:
- there is no need to hold the lock to access ICR (atomic clear of status
flags)
- only hold the lock inside stm32_receive_chars() routine (no need to
call pm_wakeup_dev_event with lock held)
- keep stm32_transmit_chars() routine called with lock held
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-6-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 223cec70c57c..370141445780 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -214,13 +214,18 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded)
struct tty_port *tport = &port->state->port;
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- unsigned long c;
+ unsigned long c, flags;
u32 sr;
char flag;
if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
pm_wakeup_event(tport->tty->dev, 0);
+ if (threaded)
+ spin_lock_irqsave(&port->lock, flags);
+ else
+ spin_lock(&port->lock);
+
while (stm32_usart_pending_rx(port, &sr, &stm32_port->last_res,
threaded)) {
sr |= USART_SR_DUMMY_RX;
@@ -276,9 +281,12 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded)
uart_insert_char(port, sr, USART_SR_ORE, c, flag);
}
- spin_unlock(&port->lock);
+ if (threaded)
+ spin_unlock_irqrestore(&port->lock, flags);
+ else
+ spin_unlock(&port->lock);
+
tty_flip_buffer_push(tport);
- spin_lock(&port->lock);
}
static void stm32_usart_tx_dma_complete(void *arg)
@@ -459,8 +467,6 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 sr;
- spin_lock(&port->lock);
-
sr = readl_relaxed(port->membase + ofs->isr);
if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
@@ -474,10 +480,11 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch))
stm32_usart_receive_chars(port, false);
- if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch))
+ if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) {
+ spin_lock(&port->lock);
stm32_usart_transmit_chars(port);
-
- spin_unlock(&port->lock);
+ spin_unlock(&port->lock);
+ }
if (stm32_port->rx_ch)
return IRQ_WAKE_THREAD;
@@ -490,13 +497,9 @@ static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr)
struct uart_port *port = ptr;
struct stm32_port *stm32_port = to_stm32_port(port);
- spin_lock(&port->lock);
-
if (stm32_port->rx_ch)
stm32_usart_receive_chars(port, true);
- spin_unlock(&port->lock);
-
return IRQ_HANDLED;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 164/677] serial: stm32: fix wake-up flag handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (162 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 163/677] serial: stm32: fix a deadlock condition with wakeup event Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 165/677] serial: stm32: fix a deadlock in set_termios Greg Kroah-Hartman
` (519 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 12761869f0efa524348e2ae31827fd52eebf3f0d ]
This patch fixes several issue with wake-up handling:
- the WUF irq is handled several times at wake-up
- the USART is disabled / enabled at suspend to set wake-up flag.
It can cause glitches during RX.
This patch fix those issues:
- clear wake-up flag and disable wake-up irq in WUF irq handling
- enable wake-up from low power on start bit detection at port
configuration
- Unmask the wake-up flag irq at suspend and mask it at resume
In addition, pm_wakeup_event handling is moved from receice_chars to WUF
irq handling.
Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 370141445780..326f300dd410 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -218,9 +218,6 @@ static void stm32_usart_receive_chars(struct uart_port *port, bool threaded)
u32 sr;
char flag;
- if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
- pm_wakeup_event(tport->tty->dev, 0);
-
if (threaded)
spin_lock_irqsave(&port->lock, flags);
else
@@ -463,6 +460,7 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
+ struct tty_port *tport = &port->state->port;
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 sr;
@@ -473,9 +471,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
writel_relaxed(USART_ICR_RTOCF,
port->membase + ofs->icr);
- if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG)
+ if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
+ /* Clear wake up flag and disable wake up interrupt */
writel_relaxed(USART_ICR_WUCF,
port->membase + ofs->icr);
+ stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
+ if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+ pm_wakeup_event(tport->tty->dev, 0);
+ }
if ((sr & USART_SR_RXNE) && !(stm32_port->rx_ch))
stm32_usart_receive_chars(port, false);
@@ -901,6 +904,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
cr1 &= ~(USART_CR1_DEDT_MASK | USART_CR1_DEAT_MASK);
}
+ /* Configure wake up from low power on start bit detection */
+ if (stm32_port->wakeirq > 0) {
+ cr3 &= ~USART_CR3_WUS_MASK;
+ cr3 |= USART_CR3_WUS_START_BIT;
+ }
+
writel_relaxed(cr3, port->membase + ofs->cr3);
writel_relaxed(cr2, port->membase + ofs->cr2);
writel_relaxed(cr1, port->membase + ofs->cr1);
@@ -1476,23 +1485,20 @@ static void __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
{
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- const struct stm32_usart_config *cfg = &stm32_port->info->cfg;
- u32 val;
if (stm32_port->wakeirq <= 0)
return;
+ /*
+ * Enable low-power wake-up and wake-up irq if argument is set to
+ * "enable", disable low-power wake-up and wake-up irq otherwise
+ */
if (enable) {
- stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM);
- val = readl_relaxed(port->membase + ofs->cr3);
- val &= ~USART_CR3_WUS_MASK;
- /* Enable Wake up interrupt from low power on start bit */
- val |= USART_CR3_WUS_START_BIT | USART_CR3_WUFIE;
- writel_relaxed(val, port->membase + ofs->cr3);
- stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
+ stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE);
} else {
stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM);
+ stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 165/677] serial: stm32: fix a deadlock in set_termios
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (163 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 164/677] serial: stm32: fix wake-up flag handling Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 166/677] serial: liteuart: fix return value check in liteuart_probe() Greg Kroah-Hartman
` (518 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 436c97936001776f16153771ee887f125443e974 ]
CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
4 locks held by stty/766:
Move the scheduled code after the spinlock.
Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 326f300dd410..a381ee52168a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -829,12 +829,6 @@ static void stm32_usart_set_termios(struct uart_port *port,
cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
}
- /* Handle modem control interrupts */
- if (UART_ENABLE_MS(port, termios->c_cflag))
- stm32_usart_enable_ms(port);
- else
- stm32_usart_disable_ms(port);
-
usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
/*
@@ -916,6 +910,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Handle modem control interrupts */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ stm32_usart_enable_ms(port);
+ else
+ stm32_usart_disable_ms(port);
}
static const char *stm32_usart_type(struct uart_port *port)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 166/677] serial: liteuart: fix return value check in liteuart_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (164 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 165/677] serial: stm32: fix a deadlock in set_termios Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 167/677] serial: stm32: fix tx dma completion, release channel Greg Kroah-Hartman
` (517 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit cebeddd6d0d9f839b9df2930b6a768b54913a763 ]
In case of error, the function devm_platform_get_and_ioremap_resource()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210305034929.3234352-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/liteuart.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 64842f3539e1..0b06770642cb 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -270,8 +270,8 @@ static int liteuart_probe(struct platform_device *pdev)
/* get membase */
port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (!port->membase)
- return -ENXIO;
+ if (IS_ERR(port->membase))
+ return PTR_ERR(port->membase);
/* values not from device tree */
port->dev = &pdev->dev;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 167/677] serial: stm32: fix tx dma completion, release channel
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (165 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 166/677] serial: liteuart: fix return value check in liteuart_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 168/677] serial: stm32: call stm32_transmit_chars locked Greg Kroah-Hartman
` (516 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit fb4f2e04ac13e7c400e6b86afbbd314a5a2a7e8d ]
This patch add a proper release of dma channels when completing dma tx.
Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index a381ee52168a..74046ae3a412 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -292,6 +292,7 @@ static void stm32_usart_tx_dma_complete(void *arg)
struct stm32_port *stm32port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
+ dmaengine_terminate_async(stm32port->tx_ch);
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
stm32port->tx_dma_busy = false;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 168/677] serial: stm32: call stm32_transmit_chars locked
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (166 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 167/677] serial: stm32: fix tx dma completion, release channel Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 169/677] serial: stm32: fix FIFO flush in startup and set_termios Greg Kroah-Hartman
` (515 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Fabrice Gasnier, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit f16b90c2d9db3e6ac719d1946b9d335ca4ab33f3 ]
stm32_transmit_chars should be called under lock also in tx DMA callback.
Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-10-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 74046ae3a412..2bdd04a47f91 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -291,13 +291,16 @@ static void stm32_usart_tx_dma_complete(void *arg)
struct uart_port *port = arg;
struct stm32_port *stm32port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
+ unsigned long flags;
dmaengine_terminate_async(stm32port->tx_ch);
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
stm32port->tx_dma_busy = false;
/* Let's see if we have pending data to send */
+ spin_lock_irqsave(&port->lock, flags);
stm32_usart_transmit_chars(port);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static void stm32_usart_tx_interrupt_enable(struct uart_port *port)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 169/677] serial: stm32: fix FIFO flush in startup and set_termios
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (167 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 168/677] serial: stm32: call stm32_transmit_chars locked Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 170/677] serial: stm32: add FIFO flush when port is closed Greg Kroah-Hartman
` (514 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 315e2d8a125ad77a1bc28f621162713f3e7aef48 ]
Fifo flush set USART_RQR register by calling stm32_usart_set_bits
routine (Read/Modify/Write). USART_RQR register is a write only
register. So, read before write isn't correct / relevant to flush
the FIFOs.
Replace stm32_usart_set_bits call by writel_relaxed.
Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-11-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 2bdd04a47f91..183c76ddb165 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -657,7 +657,7 @@ static int stm32_usart_startup(struct uart_port *port)
/* RX FIFO Flush */
if (ofs->rqr != UNDEF_REG)
- stm32_usart_set_bits(port, ofs->rqr, USART_RQR_RXFRQ);
+ writel_relaxed(USART_RQR_RXFRQ, port->membase + ofs->rqr);
/* RX enabling */
val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit);
@@ -762,8 +762,8 @@ static void stm32_usart_set_termios(struct uart_port *port,
/* flush RX & TX FIFO */
if (ofs->rqr != UNDEF_REG)
- stm32_usart_set_bits(port, ofs->rqr,
- USART_RQR_TXFRQ | USART_RQR_RXFRQ);
+ writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ,
+ port->membase + ofs->rqr);
cr1 = USART_CR1_TE | USART_CR1_RE;
if (stm32_port->fifoen)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 170/677] serial: stm32: add FIFO flush when port is closed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (168 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 169/677] serial: stm32: fix FIFO flush in startup and set_termios Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 171/677] serial: stm32: fix tx_empty condition Greg Kroah-Hartman
` (513 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 9f77d19207a0e8ba814c8ceb22e90ce7cb2aef64 ]
Transmission complete error is sent when ISR_TC is not set. If port closure
is requested despite data in TDR / TX FIFO has not been sent (because of
flow control), ISR_TC is not set and error message is sent on port closure
but also when a new port is opened.
Flush the data when port is closed, so the error isn't printed twice upon
next port opening.
Fixes: 64c32eab6603 ("serial: stm32: Add support of TC bit status check")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-12-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 183c76ddb165..d205fce1950a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -691,6 +691,11 @@ static void stm32_usart_shutdown(struct uart_port *port)
if (ret)
dev_err(port->dev, "Transmission is not complete\n");
+ /* flush RX & TX FIFO */
+ if (ofs->rqr != UNDEF_REG)
+ writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ,
+ port->membase + ofs->rqr);
+
stm32_usart_clr_bits(port, ofs->cr1, val);
free_irq(port->irq, port);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 171/677] serial: stm32: fix tx_empty condition
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (169 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 170/677] serial: stm32: add FIFO flush when port is closed Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 172/677] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling Greg Kroah-Hartman
` (512 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Erwan Le Ray, Sasha Levin
From: Erwan Le Ray <erwan.leray@foss.st.com>
[ Upstream commit 3db1d52466dc11dca4e47ef12a6e6e97f846af62 ]
In "tx_empty", we should poll TC bit in both DMA and PIO modes (instead of
TXE) to check transmission data register has been transmitted independently
of the FIFO mode. TC indicates that both transmit register and shift
register are empty. When shift register is empty, tx_empty should return
TIOCSER_TEMT instead of TC value.
Cleans the USART_CR_TC TCCF register define (transmission complete clear
flag) as it is duplicate of USART_ICR_TCCF.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-13-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/stm32-usart.c | 5 ++++-
drivers/tty/serial/stm32-usart.h | 3 ---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index d205fce1950a..99dfa884cbef 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -515,7 +515,10 @@ static unsigned int stm32_usart_tx_empty(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE;
+ if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC)
+ return TIOCSER_TEMT;
+
+ return 0;
}
static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index cb4f327c46db..94b568aa46bb 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -127,9 +127,6 @@ struct stm32_usart_info stm32h7_info = {
/* Dummy bits */
#define USART_SR_DUMMY_RX BIT(16)
-/* USART_ICR (F7) */
-#define USART_CR_TC BIT(6)
-
/* USART_DR */
#define USART_DR_MASK GENMASK(8, 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 172/677] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (170 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 171/677] serial: stm32: fix tx_empty condition Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 173/677] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS Greg Kroah-Hartman
` (511 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Heikki Krogerus,
Badhri Jagan Sridharan, Sasha Levin
From: Badhri Jagan Sridharan <badhri@google.com>
[ Upstream commit 3287f58bcba6c6fa6167624b443a668782fac26d ]
When vbus auto discharge is enabled, TCPM can sometimes be faster than
the TCPC i.e. TCPM can go ahead and move the port to unattached state
(involves disabling vbus auto discharge) before TCPC could effectively
discharge vbus to VSAFE0V. This leaves vbus with residual charge and
increases the decay time which prevents tsafe0v from being met.
This change makes TCPM waits for a maximum of tSafe0V(max) for vbus
to discharge to VSAFE0V before transitioning to unattached state
and re-enable toggling. If vbus discharges to vsafe0v sooner, then,
transition to unattached state
happens right away.
Also, while in SNK_READY, when auto discharge is enabled, drive
disconnect based on vbus turning off instead of Rp disappearing on
CC pins. Rp disappearing on CC pins is almost instanteous compared
to vbus decay.
Sink detach:
[ 541.703058] CC1: 3 -> 0, CC2: 0 -> 0 [state SNK_READY, polarity 0, disconnected]
[ 541.703331] Setting voltage/current limit 5000 mV 0 mA
[ 541.727235] VBUS on
[ 541.749650] VBUS off
[ 541.749653] pending state change SNK_READY -> SNK_UNATTACHED @ 650 ms [rev3 NONE_AMS]
[ 541.749944] VBUS VSAFE0V
[ 541.749945] state change SNK_READY -> SNK_UNATTACHED [rev3 NONE_AMS]
[ 541.750806] Disable vbus discharge ret:0
[ 541.907345] Start toggling
[ 541.922799] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
Source detach:
[ 2555.310414] state change SRC_SEND_CAPABILITIES -> SRC_READY [rev3 POWER_NEGOTIATION]
[ 2555.310675] AMS POWER_NEGOTIATION finished
[ 2555.310679] cc:=3
[ 2593.645886] CC1: 0 -> 0, CC2: 2 -> 0 [state SRC_READY, polarity 1, disconnected]
[ 2593.645919] pending state change SRC_READY -> SNK_UNATTACHED @ 650 ms [rev3 NONE_AMS]
[ 2593.648419] VBUS off
[ 2593.648960] VBUS VSAFE0V
[ 2593.648965] state change SRC_READY -> SNK_UNATTACHED [rev3 NONE_AMS]
[ 2593.649962] Disable vbus discharge ret:0
[ 2593.890322] Start toggling
[ 2593.925663] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0,
Fixes: f321a02caebd ("usb: typec: tcpm: Implement enabling Auto Discharge disconnect support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210225101104.1680697-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tcpm/tcpm.c | 75 ++++++++++++++++++++++++++++++-----
1 file changed, 65 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index de214da4363e..b1040f00c2ba 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -456,6 +456,9 @@ struct tcpm_port {
enum tcpm_ams next_ams;
bool in_ams;
+ /* Auto vbus discharge status */
+ bool auto_vbus_discharge_enabled;
+
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
struct mutex logbuffer_lock; /* log buffer access lock */
@@ -525,6 +528,9 @@ static const char * const pd_rev[] = {
(tcpm_port_is_sink(port) && \
((port)->cc1 == TYPEC_CC_RP_3_0 || (port)->cc2 == TYPEC_CC_RP_3_0))
+#define tcpm_wait_for_discharge(port) \
+ (((port)->auto_vbus_discharge_enabled && !(port)->vbus_vsafe0v) ? PD_T_SAFE_0V : 0)
+
static enum tcpm_state tcpm_default_state(struct tcpm_port *port)
{
if (port->port_type == TYPEC_PORT_DRP) {
@@ -3439,6 +3445,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
if (port->tcpc->enable_auto_vbus_discharge) {
ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, true);
tcpm_log_force(port, "enable vbus discharge ret:%d", ret);
+ if (!ret)
+ port->auto_vbus_discharge_enabled = true;
}
ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port));
@@ -3521,6 +3529,8 @@ static void tcpm_reset_port(struct tcpm_port *port)
if (port->tcpc->enable_auto_vbus_discharge) {
ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, false);
tcpm_log_force(port, "Disable vbus discharge ret:%d", ret);
+ if (!ret)
+ port->auto_vbus_discharge_enabled = false;
}
port->in_ams = false;
port->ams = NONE_AMS;
@@ -3593,6 +3603,8 @@ static int tcpm_snk_attach(struct tcpm_port *port)
tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, false, VSAFE5V);
ret = port->tcpc->enable_auto_vbus_discharge(port->tcpc, true);
tcpm_log_force(port, "enable vbus discharge ret:%d", ret);
+ if (!ret)
+ port->auto_vbus_discharge_enabled = true;
}
ret = tcpm_set_roles(port, true, TYPEC_SINK, tcpm_data_role_for_sink(port));
@@ -4695,9 +4707,9 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
if (tcpm_port_is_disconnected(port) ||
!tcpm_port_is_source(port)) {
if (port->port_type == TYPEC_PORT_SRC)
- tcpm_set_state(port, SRC_UNATTACHED, 0);
+ tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port));
else
- tcpm_set_state(port, SNK_UNATTACHED, 0);
+ tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
}
break;
case SNK_UNATTACHED:
@@ -4728,7 +4740,23 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
tcpm_set_state(port, SNK_DEBOUNCED, 0);
break;
case SNK_READY:
- if (tcpm_port_is_disconnected(port))
+ /*
+ * EXIT condition is based primarily on vbus disconnect and CC is secondary.
+ * "A port that has entered into USB PD communications with the Source and
+ * has seen the CC voltage exceed vRd-USB may monitor the CC pin to detect
+ * cable disconnect in addition to monitoring VBUS.
+ *
+ * A port that is monitoring the CC voltage for disconnect (but is not in
+ * the process of a USB PD PR_Swap or USB PD FR_Swap) shall transition to
+ * Unattached.SNK within tSinkDisconnect after the CC voltage remains below
+ * vRd-USB for tPDDebounce."
+ *
+ * When set_auto_vbus_discharge_threshold is enabled, CC pins go
+ * away before vbus decays to disconnect threshold. Allow
+ * disconnect to be driven by vbus disconnect when auto vbus
+ * discharge is enabled.
+ */
+ if (!port->auto_vbus_discharge_enabled && tcpm_port_is_disconnected(port))
tcpm_set_state(port, unattached_state(port), 0);
else if (!port->pd_capable &&
(cc1 != old_cc1 || cc2 != old_cc2))
@@ -4827,9 +4855,13 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
* Ignore CC changes here.
*/
break;
-
default:
- if (tcpm_port_is_disconnected(port))
+ /*
+ * While acting as sink and auto vbus discharge is enabled, Allow disconnect
+ * to be driven by vbus disconnect.
+ */
+ if (tcpm_port_is_disconnected(port) && !(port->pwr_role == TYPEC_SINK &&
+ port->auto_vbus_discharge_enabled))
tcpm_set_state(port, unattached_state(port), 0);
break;
}
@@ -4993,8 +5025,16 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
case SRC_TRANSITION_SUPPLY:
case SRC_READY:
case SRC_WAIT_NEW_CAPABILITIES:
- /* Force to unattached state to re-initiate connection */
- tcpm_set_state(port, SRC_UNATTACHED, 0);
+ /*
+ * Force to unattached state to re-initiate connection.
+ * DRP port should move to Unattached.SNK instead of Unattached.SRC if
+ * sink removed. Although sink removal here is due to source's vbus collapse,
+ * treat it the same way for consistency.
+ */
+ if (port->port_type == TYPEC_PORT_SRC)
+ tcpm_set_state(port, SRC_UNATTACHED, tcpm_wait_for_discharge(port));
+ else
+ tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
break;
case PORT_RESET:
@@ -5013,9 +5053,8 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
break;
default:
- if (port->pwr_role == TYPEC_SINK &&
- port->attached)
- tcpm_set_state(port, SNK_UNATTACHED, 0);
+ if (port->pwr_role == TYPEC_SINK && port->attached)
+ tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
break;
}
}
@@ -5037,7 +5076,23 @@ static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port)
tcpm_set_state(port, tcpm_try_snk(port) ? SNK_TRY : SRC_ATTACHED,
PD_T_CC_DEBOUNCE);
break;
+ case SRC_STARTUP:
+ case SRC_SEND_CAPABILITIES:
+ case SRC_SEND_CAPABILITIES_TIMEOUT:
+ case SRC_NEGOTIATE_CAPABILITIES:
+ case SRC_TRANSITION_SUPPLY:
+ case SRC_READY:
+ case SRC_WAIT_NEW_CAPABILITIES:
+ if (port->auto_vbus_discharge_enabled) {
+ if (port->port_type == TYPEC_PORT_SRC)
+ tcpm_set_state(port, SRC_UNATTACHED, 0);
+ else
+ tcpm_set_state(port, SNK_UNATTACHED, 0);
+ }
+ break;
default:
+ if (port->pwr_role == TYPEC_SINK && port->auto_vbus_discharge_enabled)
+ tcpm_set_state(port, SNK_UNATTACHED, 0);
break;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 173/677] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (171 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 172/677] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 174/677] usb: typec: tps6598x: Fix return value check in tps6598x_probe() Greg Kroah-Hartman
` (510 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Heikki Krogerus,
Badhri Jagan Sridharan, Sasha Levin
From: Badhri Jagan Sridharan <badhri@google.com>
[ Upstream commit 19c234a14eafca78e0bc14ffb8be3891096ce147 ]
While interpreting CC_STATUS, ROLE_CONTROL has to be read to make
sure that CC1/CC2 is not forced presenting Rp/Rd.
>From the TCPCI spec:
4.4.5.2 ROLE_CONTROL (Normative):
The TCPM shall write B6 (DRP) = 0b and B3..0 (CC1/CC2) if it wishes
to control the Rp/Rd directly instead of having the TCPC perform
DRP toggling autonomously. When controlling Rp/Rd directly, the
TCPM writes to B3..0 (CC1/CC2) each time it wishes to change the
CC1/CC2 values. This control is used for TCPM-TCPC implementing
Source or Sink only as well as when a connection has been detected
via DRP toggling but the TCPM wishes to attempt Try.Src or Try.Snk.
Table 4-22. CC_STATUS Register Definition:
If (ROLE_CONTROL.CC1 = Rd) or ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp-1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp-3.0A
If (ROLE_CONTROL.CC2=Rd) or (ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp 1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp 3.0A
Fixes: 74e656d6b0551 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210304070931.1947316-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tcpm/tcpci.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index a27deb0b5f03..027afd7dfdce 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -24,6 +24,15 @@
#define AUTO_DISCHARGE_PD_HEADROOM_MV 850
#define AUTO_DISCHARGE_PPS_HEADROOM_MV 1250
+#define tcpc_presenting_cc1_rd(reg) \
+ (!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+ (((reg) & (TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT)) == \
+ (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT)))
+#define tcpc_presenting_cc2_rd(reg) \
+ (!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+ (((reg) & (TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT)) == \
+ (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT)))
+
struct tcpci {
struct device *dev;
@@ -178,19 +187,25 @@ static int tcpci_get_cc(struct tcpc_dev *tcpc,
enum typec_cc_status *cc1, enum typec_cc_status *cc2)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
- unsigned int reg;
+ unsigned int reg, role_control;
int ret;
+ ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &role_control);
+ if (ret < 0)
+ return ret;
+
ret = regmap_read(tcpci->regmap, TCPC_CC_STATUS, ®);
if (ret < 0)
return ret;
*cc1 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC1_SHIFT) &
TCPC_CC_STATUS_CC1_MASK,
- reg & TCPC_CC_STATUS_TERM);
+ reg & TCPC_CC_STATUS_TERM ||
+ tcpc_presenting_cc1_rd(role_control));
*cc2 = tcpci_to_typec_cc((reg >> TCPC_CC_STATUS_CC2_SHIFT) &
TCPC_CC_STATUS_CC2_MASK,
- reg & TCPC_CC_STATUS_TERM);
+ reg & TCPC_CC_STATUS_TERM ||
+ tcpc_presenting_cc2_rd(role_control));
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 174/677] usb: typec: tps6598x: Fix return value check in tps6598x_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (172 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 173/677] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 175/677] usb: typec: stusb160x: fix return value check in stusb160x_probe() Greg Kroah-Hartman
` (509 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Heikki Krogerus,
Wei Yongjun, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 604c75893a01c8a3b5bd6dac55535963cd44c3f5 ]
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094841.3587751-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tps6598x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index 29bd1c5a283c..4038104568f5 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -614,8 +614,8 @@ static int tps6598x_probe(struct i2c_client *client)
return ret;
fwnode = device_get_named_child_node(&client->dev, "connector");
- if (IS_ERR(fwnode))
- return PTR_ERR(fwnode);
+ if (!fwnode)
+ return -ENODEV;
tps->role_sw = fwnode_usb_role_switch_get(fwnode);
if (IS_ERR(tps->role_sw)) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 175/677] usb: typec: stusb160x: fix return value check in stusb160x_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (173 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 174/677] usb: typec: tps6598x: Fix return value check in tps6598x_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 176/677] mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities Greg Kroah-Hartman
` (508 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Heikki Krogerus,
Amelie Delaunay, Wei Yongjun, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit f2d90e07b5df2c7745ae66d2d48cc350d3f1c7d2 ]
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094839.3586773-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/stusb160x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index d21750bbbb44..6eaeba9b096e 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c
@@ -682,8 +682,8 @@ static int stusb160x_probe(struct i2c_client *client)
}
fwnode = device_get_named_child_node(chip->dev, "connector");
- if (IS_ERR(fwnode))
- return PTR_ERR(fwnode);
+ if (!fwnode)
+ return -ENODEV;
/*
* When both VDD and VSYS power supplies are present, the low power
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 176/677] mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (174 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 175/677] usb: typec: stusb160x: fix return value check in stusb160x_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 177/677] regmap: set debugfs_name to NULL after it is freed Greg Kroah-Hartman
` (507 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David E. Box, Hans de Goede,
Lee Jones, Sasha Levin
From: David E. Box <david.e.box@linux.intel.com>
[ Upstream commit a1a5c1c3df282dc122508a17500317266ef19e46 ]
Some products will be available that have PMT capabilities that are not
supported. Remove the warnings in this instance to avoid nuisance messages
and confusion.
Also return an error code for capabilities that are disabled by quirk to
prevent them from keeping the driver loaded if only disabled capabilities
are found.
Fixes: 4f8217d5b0ca ("mfd: Intel Platform Monitoring Technology support")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/intel_pmt.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/intel_pmt.c b/drivers/mfd/intel_pmt.c
index 744b230cdcca..65da2b17a204 100644
--- a/drivers/mfd/intel_pmt.c
+++ b/drivers/mfd/intel_pmt.c
@@ -79,19 +79,18 @@ static int pmt_add_dev(struct pci_dev *pdev, struct intel_dvsec_header *header,
case DVSEC_INTEL_ID_WATCHER:
if (quirks & PMT_QUIRK_NO_WATCHER) {
dev_info(dev, "Watcher not supported\n");
- return 0;
+ return -EINVAL;
}
name = "pmt_watcher";
break;
case DVSEC_INTEL_ID_CRASHLOG:
if (quirks & PMT_QUIRK_NO_CRASHLOG) {
dev_info(dev, "Crashlog not supported\n");
- return 0;
+ return -EINVAL;
}
name = "pmt_crashlog";
break;
default:
- dev_err(dev, "Unrecognized PMT capability: %d\n", id);
return -EINVAL;
}
@@ -174,12 +173,8 @@ static int pmt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
header.offset = INTEL_DVSEC_TABLE_OFFSET(table);
ret = pmt_add_dev(pdev, &header, quirks);
- if (ret) {
- dev_warn(&pdev->dev,
- "Failed to add device for DVSEC id %d\n",
- header.id);
+ if (ret)
continue;
- }
found_devices = true;
} while (true);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 177/677] regmap: set debugfs_name to NULL after it is freed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (175 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 176/677] mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 178/677] spi: rockchip: avoid objtool warning Greg Kroah-Hartman
` (506 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Meng Li, Mark Brown, Sasha Levin
From: Meng Li <Meng.Li@windriver.com>
[ Upstream commit e41a962f82e7afb5b1ee644f48ad0b3aee656268 ]
There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
regmap_debugfs_exit()
...
regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed.
Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap-debugfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index ff2ee87987c7..211a335a608d 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -660,6 +660,7 @@ void regmap_debugfs_exit(struct regmap *map)
regmap_debugfs_free_dump_cache(map);
mutex_unlock(&map->cache_lock);
kfree(map->debugfs_name);
+ map->debugfs_name = NULL;
} else {
struct regmap_debugfs_node *node, *tmp;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 178/677] spi: rockchip: avoid objtool warning
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (176 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 177/677] regmap: set debugfs_name to NULL after it is freed Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 179/677] arm64: dts: broadcom: bcm4908: fix switch parent node name Greg Kroah-Hartman
` (505 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Pratyush Yadav,
Mark Brown, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit e50989527faeafb79f45a0f7529ba8e01dff1fff ]
Building this file with clang leads to a an unreachable code path
causing a warning from objtool:
drivers/spi/spi-rockchip.o: warning: objtool: rockchip_spi_transfer_one()+0x2e0: sibling call from callable instruction with modified stack frame
Change the unreachable() into an error return that can be
handled if it ever happens, rather than silently crashing
the kernel.
Fixes: 65498c6ae241 ("spi: rockchip: support 4bit words")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210226140109.3477093-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-rockchip.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 936ef54e0903..0d75080da648 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -476,7 +476,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
return 1;
}
-static void rockchip_spi_config(struct rockchip_spi *rs,
+static int rockchip_spi_config(struct rockchip_spi *rs,
struct spi_device *spi, struct spi_transfer *xfer,
bool use_dma, bool slave_mode)
{
@@ -521,7 +521,9 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
* ctlr->bits_per_word_mask, so this shouldn't
* happen
*/
- unreachable();
+ dev_err(rs->dev, "unknown bits per word: %d\n",
+ xfer->bits_per_word);
+ return -EINVAL;
}
if (use_dma) {
@@ -554,6 +556,8 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
*/
writel_relaxed(2 * DIV_ROUND_UP(rs->freq, 2 * xfer->speed_hz),
rs->regs + ROCKCHIP_SPI_BAUDR);
+
+ return 0;
}
static size_t rockchip_spi_max_transfer_size(struct spi_device *spi)
@@ -577,6 +581,7 @@ static int rockchip_spi_transfer_one(
struct spi_transfer *xfer)
{
struct rockchip_spi *rs = spi_controller_get_devdata(ctlr);
+ int ret;
bool use_dma;
WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
@@ -596,7 +601,9 @@ static int rockchip_spi_transfer_one(
use_dma = ctlr->can_dma ? ctlr->can_dma(ctlr, spi, xfer) : false;
- rockchip_spi_config(rs, spi, xfer, use_dma, ctlr->slave);
+ ret = rockchip_spi_config(rs, spi, xfer, use_dma, ctlr->slave);
+ if (ret)
+ return ret;
if (use_dma)
return rockchip_spi_prepare_dma(rs, ctlr, xfer);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 179/677] arm64: dts: broadcom: bcm4908: fix switch parent node name
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (177 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 178/677] spi: rockchip: avoid objtool warning Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 180/677] mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe() Greg Kroah-Hartman
` (504 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
Florian Fainelli, Sasha Levin
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit a348ff97ffb840b9d74b0e64b3e0e6002187d224 ]
Ethernet switch and MDIO are grouped using "simple-bus". It's not
allowed to use "ethernet-switch" node name as it isn't a switch. Replace
it with "bus".
Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..9e799328c6db 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -131,7 +131,7 @@
status = "disabled";
};
- ethernet-switch@80000 {
+ bus@80000 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 180/677] mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (178 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 179/677] arm64: dts: broadcom: bcm4908: fix switch parent node name Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 181/677] mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC Greg Kroah-Hartman
` (503 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Miquel Raynal, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit e7a97528e3c787802d8c643d6ab2f428511bb047 ]
If dma_request_channel() fails then the probe fails and it should
return a negative error code, but currently it returns success.
fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YCqaOZ83OvPOzLwh@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/fsmc_nand.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 0101c0fab50a..a24e2f57fa68 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -1077,11 +1077,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
host->read_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->read_dma_chan) {
dev_err(&pdev->dev, "Unable to get read dma channel\n");
+ ret = -ENODEV;
goto disable_clk;
}
host->write_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->write_dma_chan) {
dev_err(&pdev->dev, "Unable to get write dma channel\n");
+ ret = -ENODEV;
goto release_dma_read_chan;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 181/677] mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (179 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 180/677] mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 182/677] mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions() Greg Kroah-Hartman
` (502 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Álvaro Fernández Rojas,
Brian Norris, Miquel Raynal, Sasha Levin
From: Álvaro Fernández Rojas <noltari@gmail.com>
[ Upstream commit f5200c14242fb8fa4a9b93f7fd4064d237e58785 ]
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall
always be done without ECC enabled.
This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2
clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed
from ff ff ff to 00 00 00, reporting incorrect ECC errors.
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 659eaa6f0980..5ff4291380c5 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2688,6 +2688,12 @@ static int brcmnand_attach_chip(struct nand_chip *chip)
ret = brcmstb_choose_ecc_layout(host);
+ /* If OOB is written with ECC enabled it will cause ECC errors */
+ if (is_hamming_ecc(host->ctrl, &host->hwcfg)) {
+ chip->ecc.write_oob = brcmnand_write_oob_raw;
+ chip->ecc.read_oob = brcmnand_read_oob_raw;
+ }
+
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 182/677] mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (180 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 181/677] mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 183/677] mtd: rawnand: qcom: Return actual error code instead of -ENODEV Greg Kroah-Hartman
` (501 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manivannan Sadhasivam, Miquel Raynal,
Sasha Levin
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Upstream commit 08608adb520e51403be7592c2214846fa440a23a ]
There are chances that the parse_mtd_partitions() function will return
-EPROBE_DEFER in mtd_device_parse_register(). This might happen when
the dependency is not available for the parser. For instance, on SDX55
the MTD_QCOMSMEM_PARTS parser depends on the QCOM_SMEM driver to parse
the partitions defined in the shared memory region. With the current
flow, the error returned from parse_mtd_partitions() will be discarded
in favor of trying to add the fallback partition.
This will prevent the driver to end up in probe deferred pool and the
partitions won't be parsed even after the QCOM_SMEM driver is available.
Fix this issue by bailing out of mtd_device_parse_register() when
-EPROBE_DEFER error is returned from parse_mtd_partitions() function and
propagate the error code to the driver core for probing later.
Fixes: 5ac67ce36cfe ("mtd: move code adding (registering) partitions to the parse_mtd_partitions()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/mtdcore.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 2d6423d89a17..d97ddc65b5d4 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -820,6 +820,9 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
/* Prefer parsed partitions over driver-provided fallback */
ret = parse_mtd_partitions(mtd, types, parser_data);
+ if (ret == -EPROBE_DEFER)
+ goto out;
+
if (ret > 0)
ret = 0;
else if (nr_parts)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 183/677] mtd: rawnand: qcom: Return actual error code instead of -ENODEV
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (181 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 182/677] mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 184/677] mtd: dont lock when recursively deleting partitions Greg Kroah-Hartman
` (500 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manivannan Sadhasivam, Miquel Raynal,
Sasha Levin
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Upstream commit 55fbb9ba4f06cb6aff32daca1e1910173c13ec51 ]
In qcom_probe_nand_devices() function, the error code returned by
qcom_nand_host_init_and_register() is converted to -ENODEV in the case
of failure. This poses issue if -EPROBE_DEFER is returned when the
dependency is not available for a component like parser.
So let's restructure the error handling logic a bit and return the
actual error code in case of qcom_nand_host_init_and_register() failure.
Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/qcom_nandc.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index fd4c318b520f..87c23bb320bf 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2898,7 +2898,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
struct device *dev = nandc->dev;
struct device_node *dn = dev->of_node, *child;
struct qcom_nand_host *host;
- int ret;
+ int ret = -ENODEV;
for_each_available_child_of_node(dn, child) {
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
@@ -2916,10 +2916,7 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
list_add_tail(&host->node, &nandc->host_list);
}
- if (list_empty(&nandc->host_list))
- return -ENODEV;
-
- return 0;
+ return ret;
}
/* parse custom DT properties here */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 184/677] mtd: dont lock when recursively deleting partitions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (182 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 183/677] mtd: rawnand: qcom: Return actual error code instead of -ENODEV Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 185/677] mtd: parsers: qcom: Fix error condition Greg Kroah-Hartman
` (499 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Bauer, Miquel Raynal, Sasha Levin
From: David Bauer <mail@david-bauer.net>
[ Upstream commit cb4543054c5c4fd33df960b41d7b483ebca8e786 ]
When recursively deleting partitions, don't acquire the masters
partition lock twice. Otherwise the process ends up in a deadlocked
state.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210217195320.893253-1-mail@david-bauer.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/mtdpart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 12ca4f19cb14..665fd9020b76 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -331,7 +331,7 @@ static int __del_mtd_partitions(struct mtd_info *mtd)
list_for_each_entry_safe(child, next, &mtd->partitions, part.node) {
if (mtd_has_partitions(child))
- del_mtd_partitions(child);
+ __del_mtd_partitions(child);
pr_info("Deleting %s MTD partition\n", child->name);
ret = del_mtd_device(child);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 185/677] mtd: parsers: qcom: Fix error condition
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (183 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 184/677] mtd: dont lock when recursively deleting partitions Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 186/677] mtd: parsers: qcom: incompatible with spi-nor 4k sectors Greg Kroah-Hartman
` (498 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Miquel Raynal, Sasha Levin
From: Miquel Raynal <miquel.raynal@bootlin.com>
[ Upstream commit c95310e1b33eae9767af9698aa976d5301f37203 ]
qcom_smem_get() does not return NULL, and even if it did, the NULL
condition is usually not an error but a success condition and should
not trigger an error trace.
Let's replace IS_ERR_OR_NULL() by IS_ERR().
This fixes the following smatch warning:
drivers/mtd/parsers/qcomsmempart.c:109 parse_qcomsmem_part() warn: passing zero to 'PTR_ERR'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 803eb124e1a6 ("mtd: parsers: Add Qcom SMEM parser")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303084634.12796-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/parsers/qcomsmempart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c
index 808cb33d71f8..1c8a44d0d6e4 100644
--- a/drivers/mtd/parsers/qcomsmempart.c
+++ b/drivers/mtd/parsers/qcomsmempart.c
@@ -104,7 +104,7 @@ static int parse_qcomsmem_part(struct mtd_info *mtd,
* complete partition table
*/
ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
- if (IS_ERR_OR_NULL(ptable)) {
+ if (IS_ERR(ptable)) {
pr_err("Error reading partition table\n");
return PTR_ERR(ptable);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 186/677] mtd: parsers: qcom: incompatible with spi-nor 4k sectors
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (184 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 185/677] mtd: parsers: qcom: Fix error condition Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 187/677] mtd: maps: fix error return code of physmap_flash_remove() Greg Kroah-Hartman
` (497 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manivannan Sadhasivam, Baruch Siach,
Miquel Raynal, Sasha Levin
From: Baruch Siach <baruch@tkos.co.il>
[ Upstream commit 8f62f59f83c3bc902af91c80732cfcd17e0d7069 ]
Partition size and offset value are in block size units, which is the
same as 'erasesize'. But when 4K sectors are enabled erasesize is set to
4K. Bail out in that case.
Fixes: 803eb124e1a64 ("mtd: parsers: Add Qcom SMEM parser")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/0a2611f885b894274436ded3ca78bc0440fca74a.1614790096.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/parsers/qcomsmempart.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c
index 1c8a44d0d6e4..d9083308f6ba 100644
--- a/drivers/mtd/parsers/qcomsmempart.c
+++ b/drivers/mtd/parsers/qcomsmempart.c
@@ -65,6 +65,13 @@ static int parse_qcomsmem_part(struct mtd_info *mtd,
int ret, i, numparts;
char *name, *c;
+ if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_4K_SECTORS)
+ && mtd->type == MTD_NORFLASH) {
+ pr_err("%s: SMEM partition parser is incompatible with 4K sectors\n",
+ mtd->name);
+ return -EINVAL;
+ }
+
pr_debug("Parsing partition table info from SMEM\n");
ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
if (IS_ERR(ptable)) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 187/677] mtd: maps: fix error return code of physmap_flash_remove()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (185 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 186/677] mtd: parsers: qcom: incompatible with spi-nor 4k sectors Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 188/677] ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control Greg Kroah-Hartman
` (496 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, TOTE Robot, Jia-Ju Bai,
Miquel Raynal, Sasha Levin
From: Jia-Ju Bai <baijiaju1990@gmail.com>
[ Upstream commit 620b90d30c08684dc6ebee07c72755d997f9d1f6 ]
When platform_get_drvdata() returns NULL to info, no error return code
of physmap_flash_remove() is assigned.
To fix this bug, err is assigned with -EINVAL in this case
Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/maps/physmap-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 001ed5deb622..4f63b8430c71 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -69,8 +69,10 @@ static int physmap_flash_remove(struct platform_device *dev)
int i, err = 0;
info = platform_get_drvdata(dev);
- if (!info)
+ if (!info) {
+ err = -EINVAL;
goto out;
+ }
if (info->cmtd) {
err = mtd_device_unregister(info->cmtd);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 188/677] ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (186 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 187/677] mtd: maps: fix error return code of physmap_flash_remove() Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 189/677] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Greg Kroah-Hartman
` (495 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Valentin Caron, Alexandre Torgue,
Sasha Levin
From: Valentin CARON - foss <valentin.caron@foss.st.com>
[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]
Modify usart 2 & 3 pins to allow wake up from low power mode while the
hardware flow control is activated. UART RTS pin need to stay configure
in idle mode to receive characters in order to wake up.
Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7b4249ed1983..060baa8b7e9d 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1891,10 +1891,15 @@
usart2_idle_pins_c: usart2-idle-2 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
- <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
<STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
};
pins2 {
+ pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins3 {
pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
bias-disable;
};
@@ -1940,10 +1945,15 @@
usart3_idle_pins_b: usart3-idle-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
- <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
<STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
};
pins2 {
+ pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
bias-disable;
};
@@ -1976,10 +1986,15 @@
usart3_idle_pins_c: usart3-idle-2 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
- <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
<STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
};
pins2 {
+ pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
bias-disable;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 189/677] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (187 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 188/677] ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 190/677] iio: adis16480: fix pps mode sampling frequency math Greg Kroah-Hartman
` (494 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aswath Govindraju, Nishanth Menon,
Kishon Vijay Abraham I, Sasha Levin
From: Aswath Govindraju <a-govindraju@ti.com>
[ Upstream commit eb8f6194e8074d7b00642dd75cf04d13e1b218e4 ]
According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
Also, update the itap delay values for all the MMCSD subsystems according
the latest J721e data sheet[2]
[1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
[2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: cd48ce86a4d0 ("arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210305054104.10153-1-a-govindraju@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 8c84dafb7125..f1e7da3dfa27 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1042,13 +1042,16 @@
assigned-clocks = <&k3_clks 91 1>;
assigned-clock-parents = <&k3_clks 91 2>;
bus-width = <8>;
- mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
mmc-ddr-1_8v;
ti,otap-del-sel-legacy = <0xf>;
ti,otap-del-sel-mmc-hs = <0xf>;
ti,otap-del-sel-ddr52 = <0x5>;
ti,otap-del-sel-hs200 = <0x6>;
ti,otap-del-sel-hs400 = <0x0>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
+ ti,itap-del-sel-ddr52 = <0x3>;
ti,trm-icp = <0x8>;
ti,strobe-sel = <0x77>;
dma-coherent;
@@ -1069,9 +1072,15 @@
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
+ sdhci-caps-mask = <0x2 0x0>;
};
main_sdhci2: mmc@4f98000 {
@@ -1089,9 +1098,15 @@
ti,otap-del-sel-sdr25 = <0xf>;
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,itap-del-sel-ddr50 = <0x2>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
+ sdhci-caps-mask = <0x2 0x0>;
};
usbss0: cdns-usb@4104000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 190/677] iio: adis16480: fix pps mode sampling frequency math
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (188 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 189/677] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 191/677] arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone Greg Kroah-Hartman
` (493 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nuno Sa, Jonathan Cameron, Sasha Levin
From: Nuno Sa <nuno.sa@analog.com>
[ Upstream commit 0463e60f087069adf25a815cd88753946aca2565 ]
When using PPS mode, the input clock needs to be scaled so that we have
an IMU sample rate between (optimally) 4000 and 4250. After this, we can
use the decimation filter to lower the sampling rate in order to get what
the user wants. Optimally, the user sample rate is a multiple of both the
IMU sample rate and the input clock. Hence, calculating the sync_scale
dynamically gives us better chances of achieving a perfect/integer value
for DEC_RATE. The math here is:
1. lcm of the input clock and the desired output rate.
2. get the highest multiple of the previous result lower than the adis
max rate.
3. The last result becomes the IMU sample rate. Use that to calculate
SYNC_SCALE and DEC_RATE (to get the user output rate).
Fixes: 326e2357553d3 ("iio: imu: adis16480: Add support for external clock")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/imu/adis16480.c | 128 ++++++++++++++++++++++++++----------
1 file changed, 94 insertions(+), 34 deletions(-)
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index dfe86c589325..c41b8ef1e250 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -10,6 +10,7 @@
#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/math.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
@@ -17,6 +18,7 @@
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/lcm.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -170,6 +172,11 @@ static const char * const adis16480_int_pin_names[4] = {
[ADIS16480_PIN_DIO4] = "DIO4",
};
+static bool low_rate_allow;
+module_param(low_rate_allow, bool, 0444);
+MODULE_PARM_DESC(low_rate_allow,
+ "Allow IMU rates below the minimum advisable when external clk is used in PPS mode (default: N)");
+
#ifdef CONFIG_DEBUG_FS
static ssize_t adis16480_show_firmware_revision(struct file *file,
@@ -312,7 +319,8 @@ static int adis16480_debugfs_init(struct iio_dev *indio_dev)
static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
{
struct adis16480 *st = iio_priv(indio_dev);
- unsigned int t, reg;
+ unsigned int t, sample_rate = st->clk_freq;
+ int ret;
if (val < 0 || val2 < 0)
return -EINVAL;
@@ -321,28 +329,65 @@ static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
if (t == 0)
return -EINVAL;
+ mutex_lock(&st->adis.state_lock);
/*
- * When using PPS mode, the rate of data collection is equal to the
- * product of the external clock frequency and the scale factor in the
- * SYNC_SCALE register.
- * When using sync mode, or internal clock, the output data rate is
- * equal with the clock frequency divided by DEC_RATE + 1.
+ * When using PPS mode, the input clock needs to be scaled so that we have an IMU
+ * sample rate between (optimally) 4000 and 4250. After this, we can use the
+ * decimation filter to lower the sampling rate in order to get what the user wants.
+ * Optimally, the user sample rate is a multiple of both the IMU sample rate and
+ * the input clock. Hence, calculating the sync_scale dynamically gives us better
+ * chances of achieving a perfect/integer value for DEC_RATE. The math here is:
+ * 1. lcm of the input clock and the desired output rate.
+ * 2. get the highest multiple of the previous result lower than the adis max rate.
+ * 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE
+ * and DEC_RATE (to get the user output rate)
*/
if (st->clk_mode == ADIS16480_CLK_PPS) {
- t = t / st->clk_freq;
- reg = ADIS16495_REG_SYNC_SCALE;
- } else {
- t = st->clk_freq / t;
- reg = ADIS16480_REG_DEC_RATE;
+ unsigned long scaled_rate = lcm(st->clk_freq, t);
+ int sync_scale;
+
+ /*
+ * If lcm is bigger than the IMU maximum sampling rate there's no perfect
+ * solution. In this case, we get the highest multiple of the input clock
+ * lower than the IMU max sample rate.
+ */
+ if (scaled_rate > st->chip_info->int_clk)
+ scaled_rate = st->chip_info->int_clk / st->clk_freq * st->clk_freq;
+ else
+ scaled_rate = st->chip_info->int_clk / scaled_rate * scaled_rate;
+
+ /*
+ * This is not an hard requirement but it's not advised to run the IMU
+ * with a sample rate lower than 4000Hz due to possible undersampling
+ * issues. However, there are users that might really want to take the risk.
+ * Hence, we provide a module parameter for them. If set, we allow sample
+ * rates lower than 4KHz. By default, we won't allow this and we just roundup
+ * the rate to the next multiple of the input clock bigger than 4KHz. This
+ * is done like this as in some cases (when DEC_RATE is 0) might give
+ * us the closest value to the one desired by the user...
+ */
+ if (scaled_rate < 4000000 && !low_rate_allow)
+ scaled_rate = roundup(4000000, st->clk_freq);
+
+ sync_scale = scaled_rate / st->clk_freq;
+ ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+ if (ret)
+ goto error;
+
+ sample_rate = scaled_rate;
}
+ t = DIV_ROUND_CLOSEST(sample_rate, t);
+ if (t)
+ t--;
+
if (t > st->chip_info->max_dec_rate)
t = st->chip_info->max_dec_rate;
- if ((t != 0) && (st->clk_mode != ADIS16480_CLK_PPS))
- t--;
-
- return adis_write_reg_16(&st->adis, reg, t);
+ ret = __adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t);
+error:
+ mutex_unlock(&st->adis.state_lock);
+ return ret;
}
static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
@@ -350,34 +395,35 @@ static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
struct adis16480 *st = iio_priv(indio_dev);
uint16_t t;
int ret;
- unsigned int freq;
- unsigned int reg;
+ unsigned int freq, sample_rate = st->clk_freq;
- if (st->clk_mode == ADIS16480_CLK_PPS)
- reg = ADIS16495_REG_SYNC_SCALE;
- else
- reg = ADIS16480_REG_DEC_RATE;
+ mutex_lock(&st->adis.state_lock);
+
+ if (st->clk_mode == ADIS16480_CLK_PPS) {
+ u16 sync_scale;
+
+ ret = __adis_read_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, &sync_scale);
+ if (ret)
+ goto error;
- ret = adis_read_reg_16(&st->adis, reg, &t);
+ sample_rate = st->clk_freq * sync_scale;
+ }
+
+ ret = __adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t);
if (ret)
- return ret;
+ goto error;
- /*
- * When using PPS mode, the rate of data collection is equal to the
- * product of the external clock frequency and the scale factor in the
- * SYNC_SCALE register.
- * When using sync mode, or internal clock, the output data rate is
- * equal with the clock frequency divided by DEC_RATE + 1.
- */
- if (st->clk_mode == ADIS16480_CLK_PPS)
- freq = st->clk_freq * t;
- else
- freq = st->clk_freq / (t + 1);
+ mutex_unlock(&st->adis.state_lock);
+
+ freq = DIV_ROUND_CLOSEST(sample_rate, (t + 1));
*val = freq / 1000;
*val2 = (freq % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
+error:
+ mutex_unlock(&st->adis.state_lock);
+ return ret;
}
enum {
@@ -1278,6 +1324,20 @@ static int adis16480_probe(struct spi_device *spi)
st->clk_freq = clk_get_rate(st->ext_clk);
st->clk_freq *= 1000; /* micro */
+ if (st->clk_mode == ADIS16480_CLK_PPS) {
+ u16 sync_scale;
+
+ /*
+ * In PPS mode, the IMU sample rate is the clk_freq * sync_scale. Hence,
+ * default the IMU sample rate to the highest multiple of the input clock
+ * lower than the IMU max sample rate. The internal sample rate is the
+ * max...
+ */
+ sync_scale = st->chip_info->int_clk / st->clk_freq;
+ ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale);
+ if (ret)
+ return ret;
+ }
} else {
st->clk_freq = st->chip_info->int_clk;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 191/677] arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (189 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 190/677] iio: adis16480: fix pps mode sampling frequency math Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 192/677] arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity Greg Kroah-Hartman
` (492 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephen Boyd, Douglas Anderson,
Matthias Kaehlcke, Bjorn Andersson, Sasha Levin
From: Matthias Kaehlcke <mka@chromium.org>
[ Upstream commit 38f3267def6511171aef0f056ad172686903603f ]
The trip point configuration of the charger thermal zone for trogdor
is missing a node for the critical trip point. Add the missing node.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: bb06eb3607e9 ("arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.3.Ife7768b6b4765026c9d233ad4982da0e365ddbca@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 07c8b2c926c0..753fd320dfbc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -22,9 +22,11 @@
thermal-sensors = <&pm6150_adc_tm 1>;
trips {
- temperature = <125000>;
- hysteresis = <1000>;
- type = "critical";
+ charger-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
};
};
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 192/677] arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (190 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 191/677] arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 193/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
` (491 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sai Prakash Ranjan, Bjorn Andersson,
Sasha Levin
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[ Upstream commit 93138ef5ac923b10f81575d35dbcb83136cbfc40 ]
As per interrupt documentation for SM8250 SoC, the polarity
for level triggered PMU interrupt is low, fix this.
Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/96680a1c6488955c9eef7973c28026462b2a4ec0.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..1864c459a563 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -279,7 +279,7 @@
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
psci {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 193/677] arm64: dts: qcom: sm8350: Fix level triggered PMU interrupt polarity
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (191 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 192/677] arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity Greg Kroah-Hartman
@ 2021-05-12 14:43 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 194/677] arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer Greg Kroah-Hartman
` (490 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sai Prakash Ranjan, Bjorn Andersson,
Sasha Levin
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[ Upstream commit 794d3e309e44c99158d0166b1717f297341cf3ab ]
As per interrupt documentation for SM8350 SoC, the polarity
for level triggered PMU interrupt is low, fix this.
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/ca57409198477f7815e32a6a7467dcdc9b93dc4f.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 5ef460458f5c..e8bf3f95c674 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -153,7 +153,7 @@
pmu {
compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
psci {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 194/677] arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (192 preceding siblings ...)
2021-05-12 14:43 ` [PATCH 5.12 193/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 195/677] arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor Greg Kroah-Hartman
` (489 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sai Prakash Ranjan, Bjorn Andersson,
Sasha Levin
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[ Upstream commit 29a3349543e4ce3fe4e2a761403cc629e3534c67 ]
ARM architected timer interrupts DT property specifies EL2/HYP
physical interrupt and not EL2/HYP virtual interrupt for the 4th
interrupt property. As per interrupt documentation for SM8250 SoC,
the EL2/HYP physical timer interrupt is 10 and EL2/HYP virtual timer
interrupt is 12, so fix the 4th timer interrupt to be EL2 physical
timer interrupt (10 in this case).
Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/744e58f725d279eb2b049a7da42b0f09189f4054.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1864c459a563..3232ac6253bb 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3754,7 +3754,7 @@
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 12
+ <GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 195/677] arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (193 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 194/677] arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 196/677] arm64: dts: qcom: sdm845: fix number of pins in gpio-ranges Greg Kroah-Hartman
` (488 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephen Boyd, Douglas Anderson,
Bjorn Andersson, Sasha Levin
From: Douglas Anderson <dianders@chromium.org>
[ Upstream commit e440e30e26dd6b0424002ad0ddcbbcea783efd85 ]
At boot time the following happens:
1. Device core gets ready to probe our SPI driver.
2. Device core applies SPI controller's "default" pinctrl.
3. Device core calls the SPI driver's probe() function which will
eventually setup the chip select GPIO as "unasserted".
Thinking about the above, we can find:
a) For SPI devices that the BIOS inits (Cr50 and EC), the BIOS would
have had them configured as "GENI" pins and not as "GPIO" pins.
b) It turns out that our BIOS also happens to init these pins as
"output" (even though it doesn't need to since they're not muxed as
GPIO) but leaves them at the default state of "low".
c) As soon as we apply the "default" chip select it'll switch the
function to GPIO and stop driving the chip select high (which is
how "GENI" was driving it) and start driving it low.
d) As of commit 9378f46040be ("UPSTREAM: spi: spi-geni-qcom: Use the
new method of gpio CS control"), when the SPI core inits things it
inits the GPIO to be "deasserted". Prior to that commit the GPIO
was left untouched until first use.
e) When the first transaction happens we'll assert the chip select and
then deassert it after done.
So before the commit to change us to use gpio descriptors we used to
have a _really long_ assertion of chip select before our first
transaction (because it got pulled down and then the first "assert"
was a no-op). That wasn't great but (apparently) didn't cause any
real harm.
After the commit to change us to use gpio descriptors we end up
glitching the chip select line during probe. It would go low and then
high with no data transferred. The other side ought to be robust
against this, but it certainly could cause some confusion. It's known
to at least cause an error message on the EC console and it's believed
that, under certain timing conditions, it could be getting the EC into
a confused state causing the EC driver to fail to probe.
Let's fix things to avoid the glitch. We'll add an extra pinctrl
entry that sets the value of the pin to output high (CS deasserted)
before doing anything else. We'll do this in its own pinctrl node
that comes before the normal pinctrl entries to ensure that the order
is correct and that this gets applied before the mux change.
This change is in the trogdor board file rather than in the SoC dtsi
file because chip select polarity can be different depending on what's
hooked up and it doesn't feel worth it to spam the SoC dtsi file with
both options. The board file would need to pick the right one anyway.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: cfbb97fde694 ("arm64: dts: qcom: Switch sc7180-trogdor to control SPI CS via GPIO")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210218145456.1.I1da01a075dd86e005152f993b2d5d82dd9686238@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 27 +++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 753fd320dfbc..b8f7cf5cbdab 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -770,17 +770,17 @@ hp_i2c: &i2c9 {
};
&spi0 {
- pinctrl-0 = <&qup_spi0_cs_gpio>;
+ pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
};
&spi6 {
- pinctrl-0 = <&qup_spi6_cs_gpio>;
+ pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
};
ap_spi_fp: &spi10 {
- pinctrl-0 = <&qup_spi10_cs_gpio>;
+ pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
cros_ec_fp: ec@0 {
@@ -1341,6 +1341,27 @@ ap_spi_fp: &spi10 {
};
};
+ qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio37";
+ output-high;
+ };
+ };
+
+ qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio62";
+ output-high;
+ };
+ };
+
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio89";
+ output-high;
+ };
+ };
+
qup_uart3_sleep: qup-uart3-sleep {
pinmux {
pins = "gpio38", "gpio39",
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 196/677] arm64: dts: qcom: sdm845: fix number of pins in gpio-ranges
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (194 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 195/677] arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 197/677] arm64: dts: qcom: sm8150: " Greg Kroah-Hartman
` (487 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Evan Green, Shawn Guo,
Bjorn Andersson, Sasha Levin
From: Shawn Guo <shawn.guo@linaro.org>
[ Upstream commit 02058fc3839df65ff64de2a6b1c5de8c9fd705c1 ]
The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.
This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.
pinctrl_gpio_set_config()
pinctrl_get_device_gpio_range()
pinctrl_match_gpio_range()
Fixes: bc2c806293c6 ("arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-2-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..6a2ed02d383d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2382,7 +2382,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 150>;
+ gpio-ranges = <&tlmm 0 0 151>;
wakeup-parent = <&pdc_intc>;
cci0_default: cci0-default {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 197/677] arm64: dts: qcom: sm8150: fix number of pins in gpio-ranges
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (195 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 196/677] arm64: dts: qcom: sdm845: fix number of pins in gpio-ranges Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 198/677] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
` (486 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vinod Koul, Shawn Guo,
Bjorn Andersson, Sasha Levin
From: Shawn Guo <shawn.guo@linaro.org>
[ Upstream commit de3abdf3d15c6e7f456e2de3f9da78f3a31414cc ]
The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.
This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.
pinctrl_gpio_set_config()
pinctrl_get_device_gpio_range()
pinctrl_match_gpio_range()
Fixes: e13c6d144fa0 ("arm64: dts: qcom: sm8150: Add base dts file")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-3-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..778613d3410b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -914,7 +914,7 @@
<0x0 0x03D00000 0x0 0x300000>;
reg-names = "west", "east", "north", "south";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-ranges = <&tlmm 0 0 175>;
+ gpio-ranges = <&tlmm 0 0 176>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 198/677] arm64: dts: qcom: sm8250: fix number of pins in gpio-ranges
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (196 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 197/677] arm64: dts: qcom: sm8150: " Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 199/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
` (485 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bjorn Andersson, Shawn Guo, Sasha Levin
From: Shawn Guo <shawn.guo@linaro.org>
[ Upstream commit e526cb03e2aed42866a0919485a3d8ac130972cf ]
The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.
This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.
pinctrl_gpio_set_config()
pinctrl_get_device_gpio_range()
pinctrl_match_gpio_range()
Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-4-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 3232ac6253bb..c30872c94686 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2689,7 +2689,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 180>;
+ gpio-ranges = <&tlmm 0 0 181>;
wakeup-parent = <&pdc>;
pri_mi2s_active: pri-mi2s-active {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 199/677] arm64: dts: qcom: sm8350: fix number of pins in gpio-ranges
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (197 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 198/677] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 200/677] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x Greg Kroah-Hartman
` (484 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vinod Koul, Shawn Guo,
Bjorn Andersson, Sasha Levin
From: Shawn Guo <shawn.guo@linaro.org>
[ Upstream commit 790158579c8e663081e7d708d57e8ac6d69dca4e ]
The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.
This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.
pinctrl_gpio_set_config()
pinctrl_get_device_gpio_range()
pinctrl_match_gpio_range()
Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-5-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e8bf3f95c674..e2fca420e518 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -382,7 +382,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 203>;
+ gpio-ranges = <&tlmm 0 0 204>;
qup_uart3_default_state: qup-uart3-default-state {
rx {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 200/677] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (198 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 199/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 201/677] crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map Greg Kroah-Hartman
` (483 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Bjorn Andersson,
Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit c561740e7cfefaf3003a256f3a0cd9f8a069137c ]
WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
This was working so far due to a shift bug in gpio driver, however
once that is fixed this will stop working, so fix this!
Fixes: 89a32a4e769cc ("arm64: dts: qcom: db845c: add analog audio support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309102025.28405-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c4ac6f5dc008..96d36b38f269 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1015,7 +1015,7 @@
left_spkr: wsa8810-left{
compatible = "sdw10217201000";
reg = <0 1>;
- powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
@@ -1023,7 +1023,7 @@
right_spkr: wsa8810-right{
compatible = "sdw10217201000";
- powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
reg = <0 2>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 201/677] crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (199 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 200/677] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 202/677] spi: stm32: drop devres version of spi_register_master Greg Kroah-Hartman
` (482 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 98b5ef3e97b16eaeeedb936f8bda3594ff84a70e ]
In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d. Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.
Addresses-Coverity: ("Resource leak")
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
index 08a1473b2145..3191527928e4 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
@@ -103,7 +103,8 @@ int sun8i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,
dma_iv = dma_map_single(ss->dev, ctx->seed, ctx->slen, DMA_TO_DEVICE);
if (dma_mapping_error(ss->dev, dma_iv)) {
dev_err(ss->dev, "Cannot DMA MAP IV\n");
- return -EFAULT;
+ err = -EFAULT;
+ goto err_free;
}
dma_dst = dma_map_single(ss->dev, d, todo, DMA_FROM_DEVICE);
@@ -167,6 +168,7 @@ err_iv:
memcpy(ctx->seed, d + dlen, ctx->slen);
}
memzero_explicit(d, todo);
+err_free:
kfree(d);
return err;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 202/677] spi: stm32: drop devres version of spi_register_master
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (200 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 201/677] crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 203/677] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode Greg Kroah-Hartman
` (481 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Antonio Borneo, Alain Volmat,
Mark Brown, Sasha Levin
From: Antonio Borneo <antonio.borneo@foss.st.com>
[ Upstream commit 8d559a64f00b59af9cc02b803ff52f6e6880a651 ]
A call to spi_unregister_master() triggers calling remove()
for all the spi devices binded to the spi master.
Some spi device driver requires to "talk" with the spi device
during the remove(), e.g.:
- a LCD panel like drivers/gpu/drm/panel/panel-lg-lg4573.c
will turn off the backlighting sending a command over spi.
This implies that the spi master must be fully functional when
spi_unregister_master() is called, either if it is called
explicitly in the master's remove() code or implicitly by the
devres framework.
Devres calls devres_release_all() to release all the resources
"after" the remove() of the spi master driver (check code of
__device_release_driver() in drivers/base/dd.c).
If the spi master driver has an empty remove() then there would
be no issue; the devres_release_all() will release everything
in reverse order w.r.t. probe().
But if code in spi master driver remove() disables the spi or
makes it not functional (like in this spi-stm32), then devres
cannot be used safely for unregistering the spi master and the
binded spi devices.
Replace devm_spi_register_master() with spi_register_master()
and add spi_unregister_master() as first action in remove().
Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1615545286-5395-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-stm32.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 25c076461011..97cf3a2d4180 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1929,7 +1929,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- ret = devm_spi_register_master(&pdev->dev, master);
+ ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "spi master registration failed: %d\n",
ret);
@@ -1960,6 +1960,7 @@ static int stm32_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct stm32_spi *spi = spi_master_get_devdata(master);
+ spi_unregister_master(master);
spi->cfg->disable(spi);
if (master->dma_tx)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 203/677] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (201 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 202/677] spi: stm32: drop devres version of spi_register_master Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 204/677] regulator: bd9576: Fix return from bd957x_probe() Greg Kroah-Hartman
` (480 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
Florian Fainelli, Sasha Levin
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit 5ccb9f9cf05bbd729430c6d6d30d40c96a15c56a ]
Port 7 is connected to the external BCM53134S switch using RGMII.
Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..8d5d368dbe90 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -65,6 +65,7 @@
port@7 {
label = "sw";
reg = <7>;
+ phy-mode = "rgmii";
fixed-link {
speed = <1000>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 204/677] regulator: bd9576: Fix return from bd957x_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (202 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 203/677] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 205/677] arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding Greg Kroah-Hartman
` (479 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Matti Vaittinen,
Mark Brown, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 320fcd6bbd2b500923db518902c2c640242d2b50 ]
The probe() function returns an uninitialized variable in the success
path. There is no need for the "err" variable at all, just delete it.
Fixes: b014e9fae7e7 ("regulator: Support ROHM BD9576MUF and BD9573MUF")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YEsbfLJfEWtnRpoU@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/bd9576-regulator.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c
index a8b5832a5a1b..204a2da054f5 100644
--- a/drivers/regulator/bd9576-regulator.c
+++ b/drivers/regulator/bd9576-regulator.c
@@ -206,7 +206,7 @@ static int bd957x_probe(struct platform_device *pdev)
{
struct regmap *regmap;
struct regulator_config config = { 0 };
- int i, err;
+ int i;
bool vout_mode, ddr_sel;
const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
@@ -279,8 +279,7 @@ static int bd957x_probe(struct platform_device *pdev)
break;
default:
dev_err(&pdev->dev, "Unsupported chip type\n");
- err = -EINVAL;
- goto err;
+ return -EINVAL;
}
config.dev = pdev->dev.parent;
@@ -300,8 +299,7 @@ static int bd957x_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"failed to register %s regulator\n",
desc->name);
- err = PTR_ERR(rdev);
- goto err;
+ return PTR_ERR(rdev);
}
/*
* Clear the VOUT1 GPIO setting - rest of the regulators do not
@@ -310,8 +308,7 @@ static int bd957x_probe(struct platform_device *pdev)
config.ena_gpiod = NULL;
}
-err:
- return err;
+ return 0;
}
static const struct platform_device_id bd957x_pmic_id[] = {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 205/677] arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (203 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 204/677] regulator: bd9576: Fix return from bd957x_probe() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 206/677] selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S Greg Kroah-Hartman
` (478 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladimir Barinov,
Niklas Söderlund, Geert Uytterhoeven, Sasha Levin
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
[ Upstream commit c8aebc1346522d3569690867ce3996642ad52e01 ]
This fixes the bindings in media framework:
The CSI40 is endpoint number 2
The CSI41 is endpoint number 3
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210312174735.2118212-1-niklas.soderlund+renesas@ragnatech.se
Fixes: 3182aa4e0bf4d0ee ("arm64: dts: renesas: r8a77980: add CSI2/VIN support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index ec7ca72399ec..1ffa4a995a7a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -992,8 +992,8 @@
reg = <1>;
- vin4csi41: endpoint@2 {
- reg = <2>;
+ vin4csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin4>;
};
};
@@ -1020,8 +1020,8 @@
reg = <1>;
- vin5csi41: endpoint@2 {
- reg = <2>;
+ vin5csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin5>;
};
};
@@ -1048,8 +1048,8 @@
reg = <1>;
- vin6csi41: endpoint@2 {
- reg = <2>;
+ vin6csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin6>;
};
};
@@ -1076,8 +1076,8 @@
reg = <1>;
- vin7csi41: endpoint@2 {
- reg = <2>;
+ vin7csi41: endpoint@3 {
+ reg = <3>;
remote-endpoint = <&csi41vin7>;
};
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 206/677] selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (204 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 205/677] arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 207/677] crypto: arm/blake2s - fix for big endian Greg Kroah-Hartman
` (477 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, Borislav Petkov,
Sasha Levin
From: Andy Lutomirski <luto@kernel.org>
[ Upstream commit f706bb59204ba1c47e896b456c97977fc97b7964 ]
test_syscall_vdso_32 ended up with an executable stacks because the asm
was missing the annotation that says that it is modern and doesn't need
an executable stack. Add the annotation.
This was missed in commit aeaaf005da1d ("selftests/x86: Add missing
.note.GNU-stack sections").
Fixes: aeaaf005da1d ("selftests/x86: Add missing .note.GNU-stack sections")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/487ed5348a43c031b816fa7e9efedb75dc324299.1614877299.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/x86/thunks_32.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/x86/thunks_32.S b/tools/testing/selftests/x86/thunks_32.S
index a71d92da8f46..f3f56e681e9f 100644
--- a/tools/testing/selftests/x86/thunks_32.S
+++ b/tools/testing/selftests/x86/thunks_32.S
@@ -45,3 +45,5 @@ call64_from_32:
ret
.size call64_from_32, .-call64_from_32
+
+.section .note.GNU-stack,"",%progbits
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 207/677] crypto: arm/blake2s - fix for big endian
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (205 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 206/677] selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 208/677] spi: stm32: Fix use-after-free on unbind Greg Kroah-Hartman
` (476 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Biggers, Ard Biesheuvel,
Herbert Xu, Sasha Levin
From: Eric Biggers <ebiggers@google.com>
[ Upstream commit d2f2516a3882c0c6463e33c9b112b39bd483f821 ]
The new ARM BLAKE2s code doesn't work correctly (fails the self-tests)
in big endian kernel builds because it doesn't swap the endianness of
the message words when loading them. Fix this.
Fixes: 5172d322d34c ("crypto: arm/blake2s - add ARM scalar optimized BLAKE2s")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/crypto/blake2s-core.S | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S
index bed897e9a181..86345751bbf3 100644
--- a/arch/arm/crypto/blake2s-core.S
+++ b/arch/arm/crypto/blake2s-core.S
@@ -8,6 +8,7 @@
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
// Registers used to hold message words temporarily. There aren't
// enough ARM registers to hold the whole message block, so we have to
@@ -38,6 +39,23 @@
#endif
.endm
+.macro _le32_bswap a, tmp
+#ifdef __ARMEB__
+ rev_l \a, \tmp
+#endif
+.endm
+
+.macro _le32_bswap_8x a, b, c, d, e, f, g, h, tmp
+ _le32_bswap \a, \tmp
+ _le32_bswap \b, \tmp
+ _le32_bswap \c, \tmp
+ _le32_bswap \d, \tmp
+ _le32_bswap \e, \tmp
+ _le32_bswap \f, \tmp
+ _le32_bswap \g, \tmp
+ _le32_bswap \h, \tmp
+.endm
+
// Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
// (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
// columns/diagonals. s0-s1 are the word offsets to the message words the first
@@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch)
tst r1, #3
bne .Lcopy_block_misaligned
ldmia r1!, {r2-r9}
+ _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14
stmia r12!, {r2-r9}
ldmia r1!, {r2-r9}
+ _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14
stmia r12, {r2-r9}
.Lcopy_block_done:
str r1, [sp, #68] // Update message pointer
@@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch)
1:
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
ldr r3, [r1], #4
+ _le32_bswap r3, r4
#else
ldrb r3, [r1, #0]
ldrb r4, [r1, #1]
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 208/677] spi: stm32: Fix use-after-free on unbind
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (206 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 207/677] crypto: arm/blake2s - fix for big endian Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 209/677] Drivers: hv: vmbus: Drop error message when No request id available Greg Kroah-Hartman
` (475 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Alain Volmat,
Mark Brown, Sasha Levin
From: Alain Volmat <alain.volmat@foss.st.com>
[ Upstream commit 79c6246ae8793448c05da86a4c82298eed8549b0 ]
stm32_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: 8d559a64f00b ("spi: stm32: drop devres version of spi_register_master")
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-stm32.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 97cf3a2d4180..7f0244a246e9 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1803,7 +1803,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
struct reset_control *rst;
int ret;
- master = spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi));
if (!master) {
dev_err(&pdev->dev, "spi master allocation failed\n");
return -ENOMEM;
@@ -1821,18 +1821,16 @@ static int stm32_spi_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(spi->base)) {
- ret = PTR_ERR(spi->base);
- goto err_master_put;
- }
+ if (IS_ERR(spi->base))
+ return PTR_ERR(spi->base);
spi->phys_addr = (dma_addr_t)res->start;
spi->irq = platform_get_irq(pdev, 0);
- if (spi->irq <= 0) {
- ret = dev_err_probe(&pdev->dev, spi->irq, "failed to get irq\n");
- goto err_master_put;
- }
+ if (spi->irq <= 0)
+ return dev_err_probe(&pdev->dev, spi->irq,
+ "failed to get irq\n");
+
ret = devm_request_threaded_irq(&pdev->dev, spi->irq,
spi->cfg->irq_handler_event,
spi->cfg->irq_handler_thread,
@@ -1840,20 +1838,20 @@ static int stm32_spi_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq,
ret);
- goto err_master_put;
+ return ret;
}
spi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(spi->clk)) {
ret = PTR_ERR(spi->clk);
dev_err(&pdev->dev, "clk get failed: %d\n", ret);
- goto err_master_put;
+ return ret;
}
ret = clk_prepare_enable(spi->clk);
if (ret) {
dev_err(&pdev->dev, "clk enable failed: %d\n", ret);
- goto err_master_put;
+ return ret;
}
spi->clk_rate = clk_get_rate(spi->clk);
if (!spi->clk_rate) {
@@ -1949,8 +1947,6 @@ err_dma_release:
dma_release_channel(spi->dma_rx);
err_clk_disable:
clk_disable_unprepare(spi->clk);
-err_master_put:
- spi_master_put(master);
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 209/677] Drivers: hv: vmbus: Drop error message when No request id available
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (207 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 208/677] spi: stm32: Fix use-after-free on unbind Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 210/677] staging: qlge: fix an error code in probe() Greg Kroah-Hartman
` (474 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Kelley,
Andrea Parri (Microsoft),
Wei Liu, Sasha Levin
From: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
[ Upstream commit 0c85c54bf7faeb80c6b76901ed77d93acef0207d ]
Running out of request IDs on a channel essentially produces the same
effect as running out of space in the ring buffer, in that -EAGAIN is
returned. The error message in hv_ringbuffer_write() should either be
dropped (since we don't output a message when the ring buffer is full)
or be made conditional/debug-only.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Fixes: e8b7db38449ac ("Drivers: hv: vmbus: Add vmbus_requestor data structure for VMBus hardening")
Link: https://lore.kernel.org/r/20210301191348.196485-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hv/ring_buffer.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 35833d4d1a1d..ecd82ebfd5bc 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -313,7 +313,6 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
rqst_id = vmbus_next_request_id(&channel->requestor, requestid);
if (rqst_id == VMBUS_RQST_ERROR) {
spin_unlock_irqrestore(&outring_info->ring_lock, flags);
- pr_err("No request id available\n");
return -EAGAIN;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 210/677] staging: qlge: fix an error code in probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (208 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 209/677] Drivers: hv: vmbus: Drop error message when No request id available Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 211/677] x86/microcode: Check for offline CPUs before requesting new microcode Greg Kroah-Hartman
` (473 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit f7bff017741d98567265ed6a6449311a51810fb6 ]
If alloc_etherdev_mq() fails then return -ENOMEM instead of success.
The "err = 0;" triggers an unused assignment now so remove that as
well.
Fixes: 953b94009377 ("staging: qlge: Initialize devlink health dump framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YFiyicHI189PXrha@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/qlge/qlge_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
index 5516be3af898..c1d52190e1bd 100644
--- a/drivers/staging/qlge/qlge_main.c
+++ b/drivers/staging/qlge/qlge_main.c
@@ -4550,7 +4550,7 @@ static int qlge_probe(struct pci_dev *pdev,
struct net_device *ndev = NULL;
struct devlink *devlink;
static int cards_found;
- int err = 0;
+ int err;
devlink = devlink_alloc(&qlge_devlink_ops, sizeof(struct qlge_adapter));
if (!devlink)
@@ -4561,8 +4561,10 @@ static int qlge_probe(struct pci_dev *pdev,
ndev = alloc_etherdev_mq(sizeof(struct qlge_netdev_priv),
min(MAX_CPUS,
netif_get_num_default_rss_queues()));
- if (!ndev)
+ if (!ndev) {
+ err = -ENOMEM;
goto devlink_free;
+ }
ndev_priv = netdev_priv(ndev);
ndev_priv->qdev = qdev;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 211/677] x86/microcode: Check for offline CPUs before requesting new microcode
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (209 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 210/677] staging: qlge: fix an error code in probe() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 212/677] usb: host: ehci-tegra: Select USB_GADGET Kconfig option Greg Kroah-Hartman
` (472 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Otavio Pontes, Borislav Petkov,
Tony Luck, Ashok Raj, Sasha Levin
From: Otavio Pontes <otavio.pontes@intel.com>
[ Upstream commit 7189b3c11903667808029ec9766a6e96de5012a5 ]
Currently, the late microcode loading mechanism checks whether any CPUs
are offlined, and, in such a case, aborts the load attempt.
However, this must be done before the kernel caches new microcode from
the filesystem. Otherwise, when offlined CPUs are onlined later, those
cores are going to be updated through the CPU hotplug notifier callback
with the new microcode, while CPUs previously onine will continue to run
with the older microcode.
For example:
Turn off one core (2 threads):
echo 0 > /sys/devices/system/cpu/cpu3/online
echo 0 > /sys/devices/system/cpu/cpu1/online
Install the ucode fails because a primary SMT thread is offline:
cp intel-ucode/06-8e-09 /lib/firmware/intel-ucode/
echo 1 > /sys/devices/system/cpu/microcode/reload
bash: echo: write error: Invalid argument
Turn the core back on
echo 1 > /sys/devices/system/cpu/cpu3/online
echo 1 > /sys/devices/system/cpu/cpu1/online
cat /proc/cpuinfo |grep microcode
microcode : 0x30
microcode : 0xde
microcode : 0x30
microcode : 0xde
The rationale for why the update is aborted when at least one primary
thread is offline is because even if that thread is soft-offlined
and idle, it will still have to participate in broadcasted MCE's
synchronization dance or enter SMM, and in both examples it will execute
instructions so it better have the same microcode revision as the other
cores.
[ bp: Heavily edit and extend commit message with the reasoning behind all
this. ]
Fixes: 30ec26da9967 ("x86/microcode: Do not upload microcode if CPUs are offline")
Signed-off-by: Otavio Pontes <otavio.pontes@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/20210319165515.9240-2-otavio.pontes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/cpu/microcode/core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index b935e1b5f115..6a6318e9590c 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -629,16 +629,16 @@ static ssize_t reload_store(struct device *dev,
if (val != 1)
return size;
- tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true);
- if (tmp_ret != UCODE_NEW)
- return size;
-
get_online_cpus();
ret = check_online_cpus();
if (ret)
goto put;
+ tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true);
+ if (tmp_ret != UCODE_NEW)
+ goto put;
+
mutex_lock(µcode_mutex);
ret = microcode_reload_late();
mutex_unlock(µcode_mutex);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 212/677] usb: host: ehci-tegra: Select USB_GADGET Kconfig option
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (210 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 211/677] x86/microcode: Check for offline CPUs before requesting new microcode Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 213/677] devtmpfs: fix placement of complete() call Greg Kroah-Hartman
` (471 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Alan Stern,
Dmitry Osipenko, Sasha Levin
From: Dmitry Osipenko <digetx@gmail.com>
[ Upstream commit 0b9828763aeafa5e527b9d98b8789bdb34937fbc ]
Select USB_GADGET Kconfig option in order to fix build failure which
happens because ChipIdea driver has a build dependency on both USB_GADGET
and USB_EHCI_HCD, while USB_EHCI_TEGRA force-selects the ChipIdea driver
without taking into account the tristate USB_GADGET dependency. It's not
possible to do anything about the cyclic dependency of the Kconfig
options, but USB_EHCI_TEGRA is now a deprecated option that isn't used
by defconfigs and USB_GADGET is wanted on Tegra by default, hence it's
okay to have a bit clunky workaround for it.
Fixes: c3590c7656fb ("usb: host: ehci-tegra: Remove the driver")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210320151915.7566-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b94f2a070c05..df9428f1dc5e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -272,6 +272,7 @@ config USB_EHCI_TEGRA
select USB_CHIPIDEA
select USB_CHIPIDEA_HOST
select USB_CHIPIDEA_TEGRA
+ select USB_GADGET
help
This option is deprecated now and the driver was removed, use
USB_CHIPIDEA_TEGRA instead.
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 213/677] devtmpfs: fix placement of complete() call
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (211 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 212/677] usb: host: ehci-tegra: Select USB_GADGET Kconfig option Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 214/677] usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits() Greg Kroah-Hartman
` (470 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Rasmus Villemoes,
Sasha Levin
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[ Upstream commit 38f087de8947700d3b06d3d1594490e0f611c5d1 ]
Calling complete() from within the __init function is wrong -
theoretically, the init process could proceed all the way to freeing
the init mem before the devtmpfsd thread gets to execute the return
instruction in devtmpfs_setup().
In practice, it seems to be harmless as gcc inlines devtmpfs_setup()
into devtmpfsd(). So the calls of the __init functions init_chdir()
etc. actually happen from devtmpfs_setup(), but the __ref on that one
silences modpost (it's all right, because those calls happen before
the complete()). But it does make the __init annotation of the setup
function moot, which we'll fix in a subsequent patch.
Fixes: bcbacc4909f1 ("devtmpfs: refactor devtmpfsd()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20210312103027.2701413-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/devtmpfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 653c8c6ac7a7..aedeb2dc1a18 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -419,7 +419,6 @@ static int __init devtmpfs_setup(void *p)
init_chroot(".");
out:
*(int *)p = err;
- complete(&setup_done);
return err;
}
@@ -432,6 +431,7 @@ static int __ref devtmpfsd(void *p)
{
int err = devtmpfs_setup(p);
+ complete(&setup_done);
if (err)
return err;
devtmpfs_work_loop();
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 214/677] usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (212 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 213/677] devtmpfs: fix placement of complete() call Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 215/677] usb: gadget: pch_udc: Check if driver is present before calling ->setup() Greg Kroah-Hartman
` (469 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]
Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:
.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27: got restricted __le32 [usertype]
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/pch_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 931a09fdbf6d..f6f8965c4f8c 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1765,7 +1765,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
}
/* prevent from using desc. - set HOST BUSY */
dma_desc->status |= PCH_UDC_BS_HST_BSY;
- dma_desc->dataptr = cpu_to_le32(DMA_ADDR_INVALID);
+ dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID);
req->td_data = dma_desc;
req->td_data_last = dma_desc;
req->chain_len = 1;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 215/677] usb: gadget: pch_udc: Check if driver is present before calling ->setup()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (213 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 214/677] usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 216/677] usb: gadget: pch_udc: Check for DMA mapping error Greg Kroah-Hartman
` (468 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]
Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:
[ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[ 55.245843] <IRQ>
[ 55.245843] ? pch_udc_svc_data_out+0x160/0x160
Check if driver is present before calling ->setup().
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/pch_udc.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index f6f8965c4f8c..b46e9bdc720f 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -2307,6 +2307,21 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
pch_udc_set_dma(dev, DMA_DIR_RX);
}
+static int pch_udc_gadget_setup(struct pch_udc_dev *dev)
+ __must_hold(&dev->lock)
+{
+ int rc;
+
+ /* In some cases we can get an interrupt before driver gets setup */
+ if (!dev->driver)
+ return -ESHUTDOWN;
+
+ spin_unlock(&dev->lock);
+ rc = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_lock(&dev->lock);
+ return rc;
+}
+
/**
* pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
* @dev: Reference to the device structure
@@ -2378,15 +2393,12 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
else /* OUT */
dev->gadget.ep0 = &ep->ep;
- spin_lock(&dev->lock);
/* If Mass storage Reset */
if ((dev->setup_data.bRequestType == 0x21) &&
(dev->setup_data.bRequest == 0xFF))
dev->prot_stall = 0;
/* call gadget with setup data received */
- setup_supported = dev->driver->setup(&dev->gadget,
- &dev->setup_data);
- spin_unlock(&dev->lock);
+ setup_supported = pch_udc_gadget_setup(dev);
if (dev->setup_data.bRequestType & USB_DIR_IN) {
ep->td_data->status = (ep->td_data->status &
@@ -2634,9 +2646,7 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
dev->ep[i].halted = 0;
}
dev->stall = 0;
- spin_unlock(&dev->lock);
- dev->driver->setup(&dev->gadget, &dev->setup_data);
- spin_lock(&dev->lock);
+ pch_udc_gadget_setup(dev);
}
/**
@@ -2671,9 +2681,7 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
dev->stall = 0;
/* call gadget zero with setup data received */
- spin_unlock(&dev->lock);
- dev->driver->setup(&dev->gadget, &dev->setup_data);
- spin_lock(&dev->lock);
+ pch_udc_gadget_setup(dev);
}
/**
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 216/677] usb: gadget: pch_udc: Check for DMA mapping error
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (214 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 215/677] usb: gadget: pch_udc: Check if driver is present before calling ->setup() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 217/677] usb: gadget: pch_udc: Initialize device pointer before use Greg Kroah-Hartman
` (467 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]
DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:
DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]
Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/pch_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index b46e9bdc720f..29e89ed6aad5 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -2955,7 +2955,7 @@ static int init_dma_pools(struct pch_udc_dev *dev)
dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf,
UDC_EP0OUT_BUFF_SIZE * 4,
DMA_FROM_DEVICE);
- return 0;
+ return dma_mapping_error(&dev->pdev->dev, dev->dma_addr);
}
static int pch_udc_start(struct usb_gadget *g,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 217/677] usb: gadget: pch_udc: Initialize device pointer before use
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (215 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 216/677] usb: gadget: pch_udc: Check for DMA mapping error Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 218/677] usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1) Greg Kroah-Hartman
` (466 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 971d080212be4ce2b91047d25a657f46d3e39635 ]
During conversion to use GPIO descriptors the device pointer,
which is applied to devm_gpiod_get(), is not yet initialized.
Move initialization in the ->probe() in order to have it set before use.
Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/pch_udc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 29e89ed6aad5..a39122f01cdb 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1369,6 +1369,7 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
*/
static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
{
+ struct device *d = &dev->pdev->dev;
int err;
int irq_num = 0;
struct gpio_desc *gpiod;
@@ -1377,7 +1378,7 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
dev->vbus_gpio.intr = 0;
/* Retrieve the GPIO line from the USB gadget device */
- gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
+ gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
gpiod_set_consumer_name(gpiod, "pch_vbus");
@@ -3080,6 +3081,7 @@ static int pch_udc_probe(struct pci_dev *pdev,
if (retval)
return retval;
+ dev->pdev = pdev;
pci_set_drvdata(pdev, dev);
/* Determine BAR based on PCI ID */
@@ -3121,7 +3123,6 @@ static int pch_udc_probe(struct pci_dev *pdev,
/* device struct setup */
spin_lock_init(&dev->lock);
- dev->pdev = pdev;
dev->gadget.ops = &pch_udc_ops;
retval = init_dma_pools(dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 218/677] usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (216 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 217/677] usb: gadget: pch_udc: Initialize device pointer before use Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 219/677] crypto: ccp - fix command queuing to TEE ring buffer Greg Kroah-Hartman
` (465 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 049d3db625a652e23488db88b6104de4d5b62f16 ]
Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12)
for VBUS sense. Provide a DMI based quirk to have it's being used.
Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/pch_udc.c | 71 +++++++++++++++++++++++++-------
1 file changed, 57 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index a39122f01cdb..fd3656d0f760 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -7,12 +7,14 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <linux/gpio/consumer.h>
#include <linux/irq.h>
#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */
@@ -1359,6 +1361,43 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static struct gpiod_lookup_table minnowboard_udc_gpios = {
+ .dev_id = "0000:02:02.4",
+ .table = {
+ GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+ {}
+ },
+};
+
+static const struct dmi_system_id pch_udc_gpio_dmi_table[] = {
+ {
+ .ident = "MinnowBoard",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
+ },
+ .driver_data = &minnowboard_udc_gpios,
+ },
+ { }
+};
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+ gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct pch_udc_dev *dev)
+{
+ struct device *d = &dev->pdev->dev;
+ const struct dmi_system_id *dmi;
+
+ dmi = dmi_first_match(pch_udc_gpio_dmi_table);
+ if (!dmi)
+ return 0;
+
+ gpiod_add_lookup_table(dmi->driver_data);
+ return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, dmi->driver_data);
+}
+
/**
* pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
* @dev: Reference to the driver structure
@@ -1377,8 +1416,12 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
dev->vbus_gpio.port = NULL;
dev->vbus_gpio.intr = 0;
+ err = pch_vbus_gpio_add_table(dev);
+ if (err)
+ return err;
+
/* Retrieve the GPIO line from the USB gadget device */
- gpiod = devm_gpiod_get(d, NULL, GPIOD_IN);
+ gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
gpiod_set_consumer_name(gpiod, "pch_vbus");
@@ -2888,14 +2931,20 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
* @dev: Reference to the driver structure
*
* Return codes:
- * 0: Success
+ * 0: Success
+ * -%ERRNO: All kind of errors when retrieving VBUS GPIO
*/
static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
+ int ret;
+
pch_udc_init(dev);
pch_udc_pcd_reinit(dev);
- pch_vbus_gpio_init(dev);
- return 0;
+
+ ret = pch_vbus_gpio_init(dev);
+ if (ret)
+ pch_udc_exit(dev);
+ return ret;
}
/**
@@ -3097,16 +3146,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
dev->base_addr = pcim_iomap_table(pdev)[bar];
- /*
- * FIXME: add a GPIO descriptor table to pdev.dev using
- * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
- * the PCI subsystem ID. The system-dependent GPIO is necessary for
- * VBUS operation.
- */
-
/* initialize the hardware */
- if (pch_udc_pcd_init(dev))
- return -ENODEV;
+ retval = pch_udc_pcd_init(dev);
+ if (retval)
+ return retval;
pci_enable_msi(pdev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 219/677] crypto: ccp - fix command queuing to TEE ring buffer
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (217 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 218/677] usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1) Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 220/677] crypto: qat - dont release uninitialized resources Greg Kroah-Hartman
` (464 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Devaraj Rangasamy, Rijo Thomas,
Herbert Xu, Sasha Levin
From: Rijo Thomas <Rijo-john.Thomas@amd.com>
[ Upstream commit 00aa6e65aa04e500a11a2c91e92a11c37b9e234d ]
Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.
One thread shall write a command to a TEE ring buffer entry only if:
- Trusted OS has notified that the TEE command for the given entry
has been processed and driver has copied the TEE response into
client buffer.
- The command entry is empty and can be written into.
After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.
If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.
Fixes: 33960acccfbd (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccp/tee-dev.c | 49 +++++++++++++++++++++++++-----------
drivers/crypto/ccp/tee-dev.h | 20 +++++++++++++--
2 files changed, 53 insertions(+), 16 deletions(-)
diff --git a/drivers/crypto/ccp/tee-dev.c b/drivers/crypto/ccp/tee-dev.c
index 5e697a90ea7f..bcb81fef4211 100644
--- a/drivers/crypto/ccp/tee-dev.c
+++ b/drivers/crypto/ccp/tee-dev.c
@@ -36,6 +36,7 @@ static int tee_alloc_ring(struct psp_tee_device *tee, int ring_size)
if (!start_addr)
return -ENOMEM;
+ memset(start_addr, 0x0, ring_size);
rb_mgr->ring_start = start_addr;
rb_mgr->ring_size = ring_size;
rb_mgr->ring_pa = __psp_pa(start_addr);
@@ -244,41 +245,54 @@ static int tee_submit_cmd(struct psp_tee_device *tee, enum tee_cmd_id cmd_id,
void *buf, size_t len, struct tee_ring_cmd **resp)
{
struct tee_ring_cmd *cmd;
- u32 rptr, wptr;
int nloop = 1000, ret = 0;
+ u32 rptr;
*resp = NULL;
mutex_lock(&tee->rb_mgr.mutex);
- wptr = tee->rb_mgr.wptr;
-
- /* Check if ring buffer is full */
+ /* Loop until empty entry found in ring buffer */
do {
+ /* Get pointer to ring buffer command entry */
+ cmd = (struct tee_ring_cmd *)
+ (tee->rb_mgr.ring_start + tee->rb_mgr.wptr);
+
rptr = ioread32(tee->io_regs + tee->vdata->ring_rptr_reg);
- if (!(wptr + sizeof(struct tee_ring_cmd) == rptr))
+ /* Check if ring buffer is full or command entry is waiting
+ * for response from TEE
+ */
+ if (!(tee->rb_mgr.wptr + sizeof(struct tee_ring_cmd) == rptr ||
+ cmd->flag == CMD_WAITING_FOR_RESPONSE))
break;
- dev_info(tee->dev, "tee: ring buffer full. rptr = %u wptr = %u\n",
- rptr, wptr);
+ dev_dbg(tee->dev, "tee: ring buffer full. rptr = %u wptr = %u\n",
+ rptr, tee->rb_mgr.wptr);
- /* Wait if ring buffer is full */
+ /* Wait if ring buffer is full or TEE is processing data */
mutex_unlock(&tee->rb_mgr.mutex);
schedule_timeout_interruptible(msecs_to_jiffies(10));
mutex_lock(&tee->rb_mgr.mutex);
} while (--nloop);
- if (!nloop && (wptr + sizeof(struct tee_ring_cmd) == rptr)) {
- dev_err(tee->dev, "tee: ring buffer full. rptr = %u wptr = %u\n",
- rptr, wptr);
+ if (!nloop &&
+ (tee->rb_mgr.wptr + sizeof(struct tee_ring_cmd) == rptr ||
+ cmd->flag == CMD_WAITING_FOR_RESPONSE)) {
+ dev_err(tee->dev, "tee: ring buffer full. rptr = %u wptr = %u response flag %u\n",
+ rptr, tee->rb_mgr.wptr, cmd->flag);
ret = -EBUSY;
goto unlock;
}
- /* Pointer to empty data entry in ring buffer */
- cmd = (struct tee_ring_cmd *)(tee->rb_mgr.ring_start + wptr);
+ /* Do not submit command if PSP got disabled while processing any
+ * command in another thread
+ */
+ if (psp_dead) {
+ ret = -EBUSY;
+ goto unlock;
+ }
/* Write command data into ring buffer */
cmd->cmd_id = cmd_id;
@@ -286,6 +300,9 @@ static int tee_submit_cmd(struct psp_tee_device *tee, enum tee_cmd_id cmd_id,
memset(&cmd->buf[0], 0, sizeof(cmd->buf));
memcpy(&cmd->buf[0], buf, len);
+ /* Indicate driver is waiting for response */
+ cmd->flag = CMD_WAITING_FOR_RESPONSE;
+
/* Update local copy of write pointer */
tee->rb_mgr.wptr += sizeof(struct tee_ring_cmd);
if (tee->rb_mgr.wptr >= tee->rb_mgr.ring_size)
@@ -353,12 +370,16 @@ int psp_tee_process_cmd(enum tee_cmd_id cmd_id, void *buf, size_t len,
return ret;
ret = tee_wait_cmd_completion(tee, resp, TEE_DEFAULT_TIMEOUT);
- if (ret)
+ if (ret) {
+ resp->flag = CMD_RESPONSE_TIMEDOUT;
return ret;
+ }
memcpy(buf, &resp->buf[0], len);
*status = resp->status;
+ resp->flag = CMD_RESPONSE_COPIED;
+
return 0;
}
EXPORT_SYMBOL(psp_tee_process_cmd);
diff --git a/drivers/crypto/ccp/tee-dev.h b/drivers/crypto/ccp/tee-dev.h
index f09960112115..49d26158b71e 100644
--- a/drivers/crypto/ccp/tee-dev.h
+++ b/drivers/crypto/ccp/tee-dev.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: MIT */
/*
- * Copyright 2019 Advanced Micro Devices, Inc.
+ * Copyright (C) 2019,2021 Advanced Micro Devices, Inc.
*
* Author: Rijo Thomas <Rijo-john.Thomas@amd.com>
* Author: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
@@ -18,7 +18,7 @@
#include <linux/mutex.h>
#define TEE_DEFAULT_TIMEOUT 10
-#define MAX_BUFFER_SIZE 992
+#define MAX_BUFFER_SIZE 988
/**
* enum tee_ring_cmd_id - TEE interface commands for ring buffer configuration
@@ -81,6 +81,20 @@ enum tee_cmd_state {
TEE_CMD_STATE_COMPLETED,
};
+/**
+ * enum cmd_resp_state - TEE command's response status maintained by driver
+ * @CMD_RESPONSE_INVALID: initial state when no command is written to ring
+ * @CMD_WAITING_FOR_RESPONSE: driver waiting for response from TEE
+ * @CMD_RESPONSE_TIMEDOUT: failed to get response from TEE
+ * @CMD_RESPONSE_COPIED: driver has copied response from TEE
+ */
+enum cmd_resp_state {
+ CMD_RESPONSE_INVALID,
+ CMD_WAITING_FOR_RESPONSE,
+ CMD_RESPONSE_TIMEDOUT,
+ CMD_RESPONSE_COPIED,
+};
+
/**
* struct tee_ring_cmd - Structure of the command buffer in TEE ring
* @cmd_id: refers to &enum tee_cmd_id. Command id for the ring buffer
@@ -91,6 +105,7 @@ enum tee_cmd_state {
* @pdata: private data (currently unused)
* @res1: reserved region
* @buf: TEE command specific buffer
+ * @flag: refers to &enum cmd_resp_state
*/
struct tee_ring_cmd {
u32 cmd_id;
@@ -100,6 +115,7 @@ struct tee_ring_cmd {
u64 pdata;
u32 res1[2];
u8 buf[MAX_BUFFER_SIZE];
+ u32 flag;
/* Total size: 1024 bytes */
} __packed;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 220/677] crypto: qat - dont release uninitialized resources
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (218 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 219/677] crypto: ccp - fix command queuing to TEE ring buffer Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 221/677] crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init Greg Kroah-Hartman
` (463 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tong Zhang, Andy Shevchenko,
Giovanni Cabiddu, Herbert Xu, Sasha Levin
From: Tong Zhang <ztong0001@gmail.com>
[ Upstream commit b66accaab3791e15ac99c92f236d0d3a6d5bd64e ]
adf_vf_isr_resource_alloc() is not unwinding correctly when error
happens and it want to release uninitialized resources.
To fix this, only release initialized resources.
[ 1.792845] Trying to free already-free IRQ 11
[ 1.793091] WARNING: CPU: 0 PID: 182 at kernel/irq/manage.c:1821 free_irq+0x202/0x380
[ 1.801340] Call Trace:
[ 1.801477] adf_vf_isr_resource_free+0x32/0xb0 [intel_qat]
[ 1.801785] adf_vf_isr_resource_alloc+0x14d/0x150 [intel_qat]
[ 1.802105] adf_dev_init+0xba/0x140 [intel_qat]
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: dd0f368398ea ("crypto: qat - Add qat dh895xcc VF driver")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_vf_isr.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_vf_isr.c b/drivers/crypto/qat/qat_common/adf_vf_isr.c
index 38d316a42ba6..888388acb6bd 100644
--- a/drivers/crypto/qat/qat_common/adf_vf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_vf_isr.c
@@ -261,17 +261,26 @@ int adf_vf_isr_resource_alloc(struct adf_accel_dev *accel_dev)
goto err_out;
if (adf_setup_pf2vf_bh(accel_dev))
- goto err_out;
+ goto err_disable_msi;
if (adf_setup_bh(accel_dev))
- goto err_out;
+ goto err_cleanup_pf2vf_bh;
if (adf_request_msi_irq(accel_dev))
- goto err_out;
+ goto err_cleanup_bh;
return 0;
+
+err_cleanup_bh:
+ adf_cleanup_bh(accel_dev);
+
+err_cleanup_pf2vf_bh:
+ adf_cleanup_pf2vf_bh(accel_dev);
+
+err_disable_msi:
+ adf_disable_msi(accel_dev);
+
err_out:
- adf_vf_isr_resource_free(accel_dev);
return -EFAULT;
}
EXPORT_SYMBOL_GPL(adf_vf_isr_resource_alloc);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 221/677] crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (219 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 220/677] crypto: qat - dont release uninitialized resources Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 222/677] fotg210-udc: Fix DMA on EP0 for length > max packet size Greg Kroah-Hartman
` (462 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tong Zhang, Andy Shevchenko,
Giovanni Cabiddu, Herbert Xu, Sasha Levin
From: Tong Zhang <ztong0001@gmail.com>
[ Upstream commit 8609f5cfdc872fc3a462efa6a3eca5cb1e2f6446 ]
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.180345] Call Trace:
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249f6 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_c3xxxvf/adf_drv.c | 4 ++--
drivers/crypto/qat/qat_c62xvf/adf_drv.c | 4 ++--
drivers/crypto/qat/qat_dh895xccvf/adf_drv.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c b/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
index 1d1532e8fb6d..067ca5e17d38 100644
--- a/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
diff --git a/drivers/crypto/qat/qat_c62xvf/adf_drv.c b/drivers/crypto/qat/qat_c62xvf/adf_drv.c
index 04742a6d91ca..51ea88c0b17d 100644
--- a/drivers/crypto/qat/qat_c62xvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_c62xvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
diff --git a/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c b/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
index c972554a755e..29999da716cc 100644
--- a/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 222/677] fotg210-udc: Fix DMA on EP0 for length > max packet size
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (220 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 221/677] crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 223/677] fotg210-udc: Fix EP0 IN requests bigger than two packets Greg Kroah-Hartman
` (461 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]
For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index d6ca50f01985..39260007ebf8 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -346,7 +346,7 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
if (req->req.length - req->req.actual > ep->ep.maxpacket)
length = ep->ep.maxpacket;
else
- length = req->req.length;
+ length = req->req.length - req->req.actual;
}
d = dma_map_single(dev, buffer, length,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 223/677] fotg210-udc: Fix EP0 IN requests bigger than two packets
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (221 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 222/677] fotg210-udc: Fix DMA on EP0 for length > max packet size Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 224/677] fotg210-udc: Remove a dubious condition leading to fotg210_done Greg Kroah-Hartman
` (460 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]
For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 39260007ebf8..345827cf1b64 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -820,7 +820,7 @@ static void fotg210_ep0in(struct fotg210_udc *fotg210)
if (req->req.length)
fotg210_start_dma(ep, req);
- if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+ if (req->req.actual == req->req.length)
fotg210_done(ep, req, 0);
} else {
fotg210_set_cxdone(fotg210);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 224/677] fotg210-udc: Remove a dubious condition leading to fotg210_done
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (222 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 223/677] fotg210-udc: Fix EP0 IN requests bigger than two packets Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 225/677] fotg210-udc: Mask GRP2 interrupts we dont handle Greg Kroah-Hartman
` (459 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]
When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 345827cf1b64..a3ad93bfd256 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -379,8 +379,7 @@ static void fotg210_ep0_queue(struct fotg210_ep *ep,
}
if (ep->dir_in) { /* if IN */
fotg210_start_dma(ep, req);
- if ((req->req.length == req->req.actual) ||
- (req->req.actual < ep->ep.maxpacket))
+ if (req->req.length == req->req.actual)
fotg210_done(ep, req, 0);
} else { /* OUT */
u32 value = ioread32(ep->fotg210->reg + FOTG210_DMISGR0);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 225/677] fotg210-udc: Mask GRP2 interrupts we dont handle
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (223 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 224/677] fotg210-udc: Remove a dubious condition leading to fotg210_done Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 226/677] fotg210-udc: Dont DMA more than the buffer can take Greg Kroah-Hartman
` (458 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]
Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index a3ad93bfd256..bbcc92376307 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1026,6 +1026,12 @@ static void fotg210_init(struct fotg210_udc *fotg210)
value &= ~DMCR_GLINT_EN;
iowrite32(value, fotg210->reg + FOTG210_DMCR);
+ /* enable only grp2 irqs we handle */
+ iowrite32(~(DISGR2_DMA_ERROR | DISGR2_RX0BYTE_INT | DISGR2_TX0BYTE_INT
+ | DISGR2_ISO_SEQ_ABORT_INT | DISGR2_ISO_SEQ_ERR_INT
+ | DISGR2_RESM_INT | DISGR2_SUSP_INT | DISGR2_USBRST_INT),
+ fotg210->reg + FOTG210_DMISGR2);
+
/* disable all fifo interrupt */
iowrite32(~(u32)0, fotg210->reg + FOTG210_DMISGR1);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 226/677] fotg210-udc: Dont DMA more than the buffer can take
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (224 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 225/677] fotg210-udc: Mask GRP2 interrupts we dont handle Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 227/677] fotg210-udc: Complete OUT requests on short packets Greg Kroah-Hartman
` (457 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]
Before this, it wrote as much as available into the buffer, even if it
didn't fit.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index bbcc92376307..9925d7ac9138 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -338,8 +338,9 @@ static void fotg210_start_dma(struct fotg210_ep *ep,
} else {
buffer = req->req.buf + req->req.actual;
length = ioread32(ep->fotg210->reg +
- FOTG210_FIBCR(ep->epnum - 1));
- length &= FIBCR_BCFX;
+ FOTG210_FIBCR(ep->epnum - 1)) & FIBCR_BCFX;
+ if (length > req->req.length - req->req.actual)
+ length = req->req.length - req->req.actual;
}
} else {
buffer = req->req.buf + req->req.actual;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 227/677] fotg210-udc: Complete OUT requests on short packets
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (225 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 226/677] fotg210-udc: Dont DMA more than the buffer can take Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 228/677] usb: gadget: s3c: Fix incorrect resources releasing Greg Kroah-Hartman
` (456 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabian Vogt, Sasha Levin
From: Fabian Vogt <fabian@ritter-vogt.de>
[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]
A short packet indicates the end of a transfer and marks the request as
complete.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/fotg210-udc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 9925d7ac9138..75bf446f4a66 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -849,12 +849,16 @@ static void fotg210_out_fifo_handler(struct fotg210_ep *ep)
{
struct fotg210_request *req = list_entry(ep->queue.next,
struct fotg210_request, queue);
+ int disgr1 = ioread32(ep->fotg210->reg + FOTG210_DISGR1);
fotg210_start_dma(ep, req);
- /* finish out transfer */
+ /* Complete the request when it's full or a short packet arrived.
+ * Like other drivers, short_not_ok isn't handled.
+ */
+
if (req->req.length == req->req.actual ||
- req->req.actual < ep->ep.maxpacket)
+ (disgr1 & DISGR1_SPK_INT(ep->epnum - 1)))
fotg210_done(ep, req, 0);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 228/677] usb: gadget: s3c: Fix incorrect resources releasing
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (226 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 227/677] fotg210-udc: Complete OUT requests on short packets Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 229/677] usb: gadget: s3c: Fix the error handling path in s3c2410_udc_probe() Greg Kroah-Hartman
` (455 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET,
Krzysztof Kozlowski, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 42067ccd9eb2077979ac3ce8b7b95c694bd09e14 ]
Since commit 188db4435ac6 ("usb: gadget: s3c: use platform resources"),
'request_mem_region()' and 'ioremap()' are no more used, so they don't need
to be undone in the error handling path of the probe and in the remove
function.
Remove these calls and the unneeded 'rsrc_start' and 'rsrc_len' global
variables.
Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/b317638464f188159bd8eea44427dd359e480625.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/s3c2410_udc.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index 1d3ebb07ccd4..b81979b3bdb6 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -54,8 +54,6 @@ static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
static int irq_usbd;
-static u64 rsrc_start;
-static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
static inline u32 udc_read(u32 reg)
@@ -1775,7 +1773,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
base_addr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base_addr)) {
retval = PTR_ERR(base_addr);
- goto err_mem;
+ goto err;
}
the_controller = udc;
@@ -1793,7 +1791,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
if (retval != 0) {
dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
- goto err_map;
+ goto err;
}
dev_dbg(dev, "got irq %i\n", irq_usbd);
@@ -1864,10 +1862,7 @@ err_gpio_claim:
gpio_free(udc_info->vbus_pin);
err_int:
free_irq(irq_usbd, udc);
-err_map:
- iounmap(base_addr);
-err_mem:
- release_mem_region(rsrc_start, rsrc_len);
+err:
return retval;
}
@@ -1899,9 +1894,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
free_irq(irq_usbd, udc);
- iounmap(base_addr);
- release_mem_region(rsrc_start, rsrc_len);
-
if (!IS_ERR(udc_clock) && udc_clock != NULL) {
clk_disable_unprepare(udc_clock);
clk_put(udc_clock);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 229/677] usb: gadget: s3c: Fix the error handling path in s3c2410_udc_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (227 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 228/677] usb: gadget: s3c: Fix incorrect resources releasing Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 230/677] dt-bindings: serial: stm32: Use type: object instead of false for additionalProperties Greg Kroah-Hartman
` (454 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET,
Krzysztof Kozlowski, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit e5242861ec6a0bce25b4cd10af0fc8a508fd067d ]
Some 'clk_prepare_enable()' and 'clk_get()' must be undone in the error
handling path of the probe function, as already done in the remove
function.
Fixes: 3fc154b6b813 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/2bee52e4ce968f48b4c32545cf8f3b2ab825ba82.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/s3c2410_udc.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index b81979b3bdb6..b154b62abefa 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1750,7 +1750,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
udc_clock = clk_get(NULL, "usb-device");
if (IS_ERR(udc_clock)) {
dev_err(dev, "failed to get udc clock source\n");
- return PTR_ERR(udc_clock);
+ retval = PTR_ERR(udc_clock);
+ goto err_usb_bus_clk;
}
clk_prepare_enable(udc_clock);
@@ -1773,7 +1774,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
base_addr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base_addr)) {
retval = PTR_ERR(base_addr);
- goto err;
+ goto err_udc_clk;
}
the_controller = udc;
@@ -1791,7 +1792,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
if (retval != 0) {
dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
- goto err;
+ goto err_udc_clk;
}
dev_dbg(dev, "got irq %i\n", irq_usbd);
@@ -1862,7 +1863,14 @@ err_gpio_claim:
gpio_free(udc_info->vbus_pin);
err_int:
free_irq(irq_usbd, udc);
-err:
+err_udc_clk:
+ clk_disable_unprepare(udc_clock);
+ clk_put(udc_clock);
+ udc_clock = NULL;
+err_usb_bus_clk:
+ clk_disable_unprepare(usb_bus_clock);
+ clk_put(usb_bus_clock);
+ usb_bus_clock = NULL;
return retval;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 230/677] dt-bindings: serial: stm32: Use type: object instead of false for additionalProperties
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (228 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 229/677] usb: gadget: s3c: Fix the error handling path in s3c2410_udc_probe() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 231/677] mtd: require write permissions for locking and badblock ioctls Greg Kroah-Hartman
` (453 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Valentin Caron,
dillon min, Rob Herring, Sasha Levin
From: dillon min <dillon.minfei@gmail.com>
[ Upstream commit 9f299d3264c67a892af87337dbaa0bdd20830c0c ]
To use additional properties 'bluetooth' on serial, need replace false with
'type: object' for 'additionalProperties' to make it as a node, else will
run into dtbs_check warnings.
'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 8631678283f9..865be05083c3 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -80,7 +80,8 @@ required:
- interrupts
- clocks
-additionalProperties: false
+additionalProperties:
+ type: object
examples:
- |
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 231/677] mtd: require write permissions for locking and badblock ioctls
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (229 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 230/677] dt-bindings: serial: stm32: Use type: object instead of false for additionalProperties Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 232/677] arm64: dts: renesas: r8a779a0: Fix PMU interrupt Greg Kroah-Hartman
` (452 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Walle,
Rafał Miłecki, Richard Weinberger, Miquel Raynal,
Sasha Levin
From: Michael Walle <michael@walle.cc>
[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]
MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.
MEMSETBADBLOCK modifies the bad block table.
Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/mtdchar.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 323035d4f2d0..688de663cabf 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -651,16 +651,12 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
case MEMGETINFO:
case MEMREADOOB:
case MEMREADOOB64:
- case MEMLOCK:
- case MEMUNLOCK:
case MEMISLOCKED:
case MEMGETOOBSEL:
case MEMGETBADBLOCK:
- case MEMSETBADBLOCK:
case OTPSELECT:
case OTPGETREGIONCOUNT:
case OTPGETREGIONINFO:
- case OTPLOCK:
case ECCGETLAYOUT:
case ECCGETSTATS:
case MTDFILEMODE:
@@ -671,9 +667,13 @@ static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
/* "dangerous" commands */
case MEMERASE:
case MEMERASE64:
+ case MEMLOCK:
+ case MEMUNLOCK:
+ case MEMSETBADBLOCK:
case MEMWRITEOOB:
case MEMWRITEOOB64:
case MEMWRITE:
+ case OTPLOCK:
if (!(file->f_mode & FMODE_WRITE))
return -EPERM;
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 232/677] arm64: dts: renesas: r8a779a0: Fix PMU interrupt
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (230 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 231/677] mtd: require write permissions for locking and badblock ioctls Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 233/677] arm64: dts: mt8183: Add gce client reg for display subcomponents Greg Kroah-Hartman
` (451 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda,
Geert Uytterhoeven, Sasha Levin
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit bbbf6db5a0b56199702bb225132831bced2eee41 ]
Should use PPI No.7 for the PMU. Otherwise, the perf command didn't
show any information.
Fixes: 834c310f5418 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210325041949.925777-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index dfd6ae8b564f..86ac48e2c849 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -60,10 +60,7 @@
pmu_a76 {
compatible = "arm,cortex-a76-pmu";
- interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
/* External SCIF clock - to be overridden by boards that provide it */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 233/677] arm64: dts: mt8183: Add gce client reg for display subcomponents
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (231 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 232/677] arm64: dts: renesas: r8a779a0: Fix PMU interrupt Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 234/677] arm64: dts: mt8173: fix wrong power-domain phandle of pmic Greg Kroah-Hartman
` (450 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hsin-Yi Wang, Enric Balletbo i Serra,
Matthias Brugger, Sasha Levin
From: Hsin-Yi Wang <hsinyi@chromium.org>
[ Upstream commit b7a8f50a1437164607f73831075c06120aa1f3b3 ]
Add mediatek,gce-client-reg for mmsys, ccorr, aal, gamma, dither.
Fixes: 91f9c963ce79 ("arm64: dts: mt8183: Add display nodes for MT8183")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210324070842.1037233-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..16f4b1fc0fb9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -983,6 +983,9 @@
compatible = "mediatek,mt8183-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
#clock-cells = <1>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+ <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
};
ovl0: ovl@14008000 {
@@ -1058,6 +1061,7 @@
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};
aal0: aal@14010000 {
@@ -1067,6 +1071,7 @@
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};
gamma0: gamma@14011000 {
@@ -1075,6 +1080,7 @@
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};
dither0: dither@14012000 {
@@ -1083,6 +1089,7 @@
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};
dsi0: dsi@14014000 {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 234/677] arm64: dts: mt8173: fix wrong power-domain phandle of pmic
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (232 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 233/677] arm64: dts: mt8183: Add gce client reg for display subcomponents Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 235/677] bus: qcom: Put child node before return Greg Kroah-Hartman
` (449 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chunfeng Yun, Enric Balletbo i Serra,
Matthias Brugger, Sasha Levin
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
[ Upstream commit 4db2b9af3ee92e6c51c6a9a5dc2748e4bc1800f9 ]
Due to power domain controller is added, the power domain's
phanle is also changed from 'scpsys' to 'spm', but forget to
modify pmic node's
Fixes: 8b6562644df9 ("arm64: dts: mediatek: Add mt8173 power domain controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1616048328-13579-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 6dffada2e66b..28aa634c9780 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -294,7 +294,7 @@
&pwrap {
/* Only MT8173 E1 needs USB power domain */
- power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
pmic: mt6397 {
compatible = "mediatek,mt6397";
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 235/677] bus: qcom: Put child node before return
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (233 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 234/677] arm64: dts: mt8173: fix wrong power-domain phandle of pmic Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 236/677] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
` (448 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linus Walleij, Pan Bian,
Bjorn Andersson, Sasha Levin
From: Pan Bian <bianpan2016@163.com>
[ Upstream commit ac6ad7c2a862d682bb584a4bc904d89fa7721af8 ]
Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a12754808 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bus/qcom-ebi2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/qcom-ebi2.c b/drivers/bus/qcom-ebi2.c
index 03ddcf426887..0b8f53a688b8 100644
--- a/drivers/bus/qcom-ebi2.c
+++ b/drivers/bus/qcom-ebi2.c
@@ -353,8 +353,10 @@ static int qcom_ebi2_probe(struct platform_device *pdev)
/* Figure out the chipselect */
ret = of_property_read_u32(child, "reg", &csindex);
- if (ret)
+ if (ret) {
+ of_node_put(child);
return ret;
+ }
if (csindex > 5) {
dev_err(dev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 236/677] arm64: dts: qcom: sm8250: fix display nodes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (234 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 235/677] bus: qcom: Put child node before return Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 237/677] soundwire: bus: Fix device found flag correctly Greg Kroah-Hartman
` (447 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Marek, Dmitry Baryshkov,
Bjorn Andersson, Sasha Levin
From: Jonathan Marek <jonathan@marek.ca>
[ Upstream commit 888771a9d04ff7bf96e5ecad37969002c88a95d7 ]
Apply these fixes to the newly added sm8250 display ndoes
- Remove "notused" interconnect (which apparently was blindly copied from
my old patches)
- Use dispcc node example from dt-bindings, removing clocks which aren't
documented or used by the driver and fixing the region size.
Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 27 ++++++---------------------
1 file changed, 6 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index c30872c94686..46a6c18cea91 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2327,10 +2327,9 @@
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
- interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
- <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
- interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+ interconnect-names = "mdp0-mem", "mdp1-mem";
power-domains = <&dispcc MDSS_GDSC>;
@@ -2580,7 +2579,7 @@
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
- reg = <0 0x0af00000 0 0x20000>;
+ reg = <0 0x0af00000 0 0x10000>;
mmcx-supply = <&mmcx_reg>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@
<&dsi1_phy 0>,
<&dsi1_phy 1>,
<0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <&sleep_clk>;
+ <0>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux",
- "dptx1_phy_pll_link_clk",
- "dptx1_phy_pll_vco_div_clk",
- "dptx2_phy_pll_link_clk",
- "dptx2_phy_pll_vco_div_clk",
- "edp_phy_pll_link_clk",
- "edp_phy_pll_vco_div_clk",
- "sleep_clk";
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 237/677] soundwire: bus: Fix device found flag correctly
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (235 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 236/677] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 238/677] soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain() Greg Kroah-Hartman
` (446 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla,
Pierre-Louis Bossart, Vinod Koul, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit f03690f4f6992225d05dbd1171212e5be5a370dd ]
found flag is used to indicate SoundWire devices that are
both enumerated on the bus and available in the device list.
However this flag is not reset correctly after one iteration,
This could miss some of the devices that are enumerated on the
bus but not in device list. So reset this correctly to fix this issue!
Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309104816.20350-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soundwire/bus.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 46885429928a..4ec29338ce9a 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -705,7 +705,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
struct sdw_slave *slave, *_s;
struct sdw_slave_id id;
struct sdw_msg msg;
- bool found = false;
+ bool found;
int count = 0, ret;
u64 addr;
@@ -737,6 +737,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
sdw_extract_slave_id(bus, addr, &id);
+ found = false;
/* Now compare with entries */
list_for_each_entry_safe(slave, _s, &bus->slaves, node) {
if (sdw_compare_devid(slave, id) == 0) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 238/677] soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (236 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 237/677] soundwire: bus: Fix device found flag correctly Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 239/677] phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup Greg Kroah-Hartman
` (445 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Enric Balletbo i Serra, Matthias Brugger, Sasha Levin
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[ Upstream commit 9950588a45241b0efcfc312ab0e414260ceca709 ]
Adding one power domain in scpsys_add_subdomain is missing to assign an
error code when it fails. Fix that assigning an error code to 'ret',
this also fixes the follwowing smatch warning.
drivers/soc/mediatek/mtk-pm-domains.c:492 scpsys_add_subdomain() warn: missing error code 'ret'
Fixes: dd65030295e2 ("soc: mediatek: pm-domains: Don't print an error if child domain is deferred")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210303091054.796975-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/mediatek/mtk-pm-domains.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index b7f697666bdd..06aaf03b194c 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -487,8 +487,9 @@ static int scpsys_add_subdomain(struct scpsys *scpsys, struct device_node *paren
child_pd = scpsys_add_one_domain(scpsys, child);
if (IS_ERR(child_pd)) {
- dev_err_probe(scpsys->dev, PTR_ERR(child_pd),
- "%pOF: failed to get child domain id\n", child);
+ ret = PTR_ERR(child_pd);
+ dev_err_probe(scpsys->dev, ret, "%pOF: failed to get child domain id\n",
+ child);
goto err_put_node;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 239/677] phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (237 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 238/677] soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 240/677] phy: ralink: phy-mt7621-pci: fix XTAL bitmask Greg Kroah-Hartman
` (444 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kishon Vijay Abraham I, Vinod Koul,
Sasha Levin
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit 7e52a39f1942b771213678c56002ce90a2f126d2 ]
commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module
present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in
wiz. However during cleanup, it removed only the MUX clock provider.
Remove the DIVIDER clock provider here.
Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ti/phy-j721e-wiz.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index a75433b459dd..e28e25f98708 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -615,6 +615,12 @@ static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)
of_clk_del_provider(clk_node);
of_node_put(clk_node);
}
+
+ for (i = 0; i < wiz->clk_div_sel_num; i++) {
+ clk_node = of_get_child_by_name(node, clk_div_sel[i].node_name);
+ of_clk_del_provider(clk_node);
+ of_node_put(clk_node);
+ }
}
static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 240/677] phy: ralink: phy-mt7621-pci: fix XTAL bitmask
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (238 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 239/677] phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 241/677] phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally Greg Kroah-Hartman
` (443 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergio Paracuellos, Vinod Koul, Sasha Levin
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
[ Upstream commit 982313c38f2f3793b6435ff50997ae96a2274f5a ]
When this was rewriten to get mainlined and start to
use 'linux/bitfield.h' headers, XTAL_MASK was wrong.
It must mask three bits but only two were used. Hence
properly fix it to make things work.
Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210302105412.16221-1-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ralink/phy-mt7621-pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index 9a610b414b1f..84ee2b5c2228 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -62,7 +62,7 @@
#define RG_PE1_FRC_MSTCKDIV BIT(5)
-#define XTAL_MASK GENMASK(7, 6)
+#define XTAL_MASK GENMASK(8, 6)
#define MAX_PHYS 2
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 241/677] phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (239 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 240/677] phy: ralink: phy-mt7621-pci: fix XTAL bitmask Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 242/677] phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe() Greg Kroah-Hartman
` (442 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Vinod Koul, Sasha Levin
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 6cb17707aad869de163d7bf42c253caf501be4e2 ]
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY
to MACH_ARMADA_375, and ask the user in case of compile-testing.
Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/marvell/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 6c96f2bf5266..c8ee23fc3a83 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -3,8 +3,8 @@
# Phy drivers for Marvell platforms
#
config ARMADA375_USBCLUSTER_PHY
- def_bool y
- depends on MACH_ARMADA_375 || COMPILE_TEST
+ bool "Armada 375 USB cluster PHY support" if COMPILE_TEST
+ default y if MACH_ARMADA_375
depends on OF && HAS_IOMEM
select GENERIC_PHY
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 242/677] phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (240 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 241/677] phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 243/677] phy: ingenic: Fix a typo in ingenic_usb_phy_probe() Greg Kroah-Hartman
` (441 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Sergio Paracuellos, Vinod Koul, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit b976c987511e34a2e9b23545de912a121a9eded5 ]
Fix the return value check which testing the wrong variable
in mt7621_pci_phy_probe().
Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210305034931.3237558-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ralink/phy-mt7621-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index 84ee2b5c2228..753cb5bab930 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -319,9 +319,9 @@ static int mt7621_pci_phy_probe(struct platform_device *pdev)
return PTR_ERR(phy->regmap);
phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy->phy)) {
dev_err(dev, "failed to create phy\n");
- return PTR_ERR(phy);
+ return PTR_ERR(phy->phy);
}
phy_set_drvdata(phy->phy, phy);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 243/677] phy: ingenic: Fix a typo in ingenic_usb_phy_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (241 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 242/677] phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 244/677] arm64: dts: mediatek: fix reset GPIO level on pumpkin Greg Kroah-Hartman
` (440 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Paul Cercueil, Vinod Koul, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 446c200ee3e8f6faf189ef6f25a0f5bb294afae4 ]
Fix the return value check typo which testing the wrong variable
in ingenic_usb_phy_probe().
Fixes: 31de313dfdcf ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210305034933.3240914-1-weiyongjun1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ingenic/phy-ingenic-usb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index ea127b177f46..28c28d816484 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -352,8 +352,8 @@ static int ingenic_usb_phy_probe(struct platform_device *pdev)
}
priv->phy = devm_phy_create(dev, NULL, &ingenic_usb_phy_ops);
- if (IS_ERR(priv))
- return PTR_ERR(priv);
+ if (IS_ERR(priv->phy))
+ return PTR_ERR(priv->phy);
phy_set_drvdata(priv->phy, priv);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 244/677] arm64: dts: mediatek: fix reset GPIO level on pumpkin
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (242 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 243/677] phy: ingenic: Fix a typo in ingenic_usb_phy_probe() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 245/677] NFSv4.2: fix copy stateid copying for the async copy Greg Kroah-Hartman
` (439 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabien Parent, Matthias Brugger, Sasha Levin
From: Fabien Parent <fparent@baylibre.com>
[ Upstream commit a7dceafed43a4a610d340da3703653cca2c50c1d ]
The tca6416 chip is active low. Fix the reset-gpios value.
Fixes: e2a8fa1e0faa ("arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210223221826.2063911-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 63fd70086bb8..9f27e7ed5e22 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -56,7 +56,7 @@
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
- reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 245/677] NFSv4.2: fix copy stateid copying for the async copy
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (243 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 244/677] arm64: dts: mediatek: fix reset GPIO level on pumpkin Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 246/677] crypto: poly1305 - fix poly1305_core_setkey() declaration Greg Kroah-Hartman
` (438 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Olga Kornievskaia,
Chuck Lever, Dai Ngo, Sasha Levin
From: Olga Kornievskaia <kolga@netapp.com>
[ Upstream commit e739b12042b6b079a397a3c234f96c09d1de0b40 ]
This patch fixes Dan Carpenter's report that the static checker
found a problem where memcpy() was copying into too small of a buffer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc5805a ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfsd/nfs4proc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index dd9f38d072dd..e13c4c81fb89 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1538,8 +1538,8 @@ nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
if (!nfs4_init_copy_state(nn, copy))
goto out_err;
refcount_set(&async_copy->refcount, 1);
- memcpy(©->cp_res.cb_stateid, ©->cp_stateid,
- sizeof(copy->cp_stateid));
+ memcpy(©->cp_res.cb_stateid, ©->cp_stateid.stid,
+ sizeof(copy->cp_res.cb_stateid));
dup_copy_fields(copy, async_copy);
async_copy->copy_task = kthread_create(nfsd4_do_async_copy,
async_copy, "%s", "copy thread");
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 246/677] crypto: poly1305 - fix poly1305_core_setkey() declaration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (244 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 245/677] NFSv4.2: fix copy stateid copying for the async copy Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 247/677] crypto: qat - fix error path in adf_isr_resource_alloc() Greg Kroah-Hartman
` (437 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Ard Biesheuvel,
Eric Biggers, Herbert Xu, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 8d195e7a8ada68928f2aedb2c18302a4518fe68e ]
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/crypto/poly1305-glue.c | 2 +-
arch/arm64/crypto/poly1305-glue.c | 2 +-
arch/mips/crypto/poly1305-glue.c | 2 +-
arch/x86/crypto/poly1305_glue.c | 6 +++---
include/crypto/internal/poly1305.h | 3 ++-
include/crypto/poly1305.h | 6 ++++--
lib/crypto/poly1305-donna32.c | 3 ++-
lib/crypto/poly1305-donna64.c | 3 ++-
lib/crypto/poly1305.c | 3 ++-
9 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c
index 3023c1acfa19..c31bd8f7c092 100644
--- a/arch/arm/crypto/poly1305-glue.c
+++ b/arch/arm/crypto/poly1305-glue.c
@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
{
poly1305_init_arm(&dctx->h, key);
dctx->s[0] = get_unaligned_le32(key + 16);
diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
index 683de671741a..9c3d86e397bf 100644
--- a/arch/arm64/crypto/poly1305-glue.c
+++ b/arch/arm64/crypto/poly1305-glue.c
@@ -25,7 +25,7 @@ asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
{
poly1305_init_arm64(&dctx->h, key);
dctx->s[0] = get_unaligned_le32(key + 16);
diff --git a/arch/mips/crypto/poly1305-glue.c b/arch/mips/crypto/poly1305-glue.c
index fc881b46d911..bc6110fb98e0 100644
--- a/arch/mips/crypto/poly1305-glue.c
+++ b/arch/mips/crypto/poly1305-glue.c
@@ -17,7 +17,7 @@ asmlinkage void poly1305_init_mips(void *state, const u8 *key);
asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
{
poly1305_init_mips(&dctx->h, key);
dctx->s[0] = get_unaligned_le32(key + 16);
diff --git a/arch/x86/crypto/poly1305_glue.c b/arch/x86/crypto/poly1305_glue.c
index 646da46e8d10..1dfb8af48a3c 100644
--- a/arch/x86/crypto/poly1305_glue.c
+++ b/arch/x86/crypto/poly1305_glue.c
@@ -16,7 +16,7 @@
#include <asm/simd.h>
asmlinkage void poly1305_init_x86_64(void *ctx,
- const u8 key[POLY1305_KEY_SIZE]);
+ const u8 key[POLY1305_BLOCK_SIZE]);
asmlinkage void poly1305_blocks_x86_64(void *ctx, const u8 *inp,
const size_t len, const u32 padbit);
asmlinkage void poly1305_emit_x86_64(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
@@ -81,7 +81,7 @@ static void convert_to_base2_64(void *ctx)
state->is_base2_26 = 0;
}
-static void poly1305_simd_init(void *ctx, const u8 key[POLY1305_KEY_SIZE])
+static void poly1305_simd_init(void *ctx, const u8 key[POLY1305_BLOCK_SIZE])
{
poly1305_init_x86_64(ctx, key);
}
@@ -129,7 +129,7 @@ static void poly1305_simd_emit(void *ctx, u8 mac[POLY1305_DIGEST_SIZE],
poly1305_emit_avx(ctx, mac, nonce);
}
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
{
poly1305_simd_init(&dctx->h, key);
dctx->s[0] = get_unaligned_le32(&key[16]);
diff --git a/include/crypto/internal/poly1305.h b/include/crypto/internal/poly1305.h
index 064e52ca5248..196aa769f296 100644
--- a/include/crypto/internal/poly1305.h
+++ b/include/crypto/internal/poly1305.h
@@ -18,7 +18,8 @@
* only the ε-almost-∆-universal hash function (not the full MAC) is computed.
*/
-void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
+void poly1305_core_setkey(struct poly1305_core_key *key,
+ const u8 raw_key[POLY1305_BLOCK_SIZE]);
static inline void poly1305_core_init(struct poly1305_state *state)
{
*state = (struct poly1305_state){};
diff --git a/include/crypto/poly1305.h b/include/crypto/poly1305.h
index f1f67fc749cf..090692ec3bc7 100644
--- a/include/crypto/poly1305.h
+++ b/include/crypto/poly1305.h
@@ -58,8 +58,10 @@ struct poly1305_desc_ctx {
};
};
-void poly1305_init_arch(struct poly1305_desc_ctx *desc, const u8 *key);
-void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key);
+void poly1305_init_arch(struct poly1305_desc_ctx *desc,
+ const u8 key[POLY1305_KEY_SIZE]);
+void poly1305_init_generic(struct poly1305_desc_ctx *desc,
+ const u8 key[POLY1305_KEY_SIZE]);
static inline void poly1305_init(struct poly1305_desc_ctx *desc, const u8 *key)
{
diff --git a/lib/crypto/poly1305-donna32.c b/lib/crypto/poly1305-donna32.c
index 3cc77d94390b..7fb71845cc84 100644
--- a/lib/crypto/poly1305-donna32.c
+++ b/lib/crypto/poly1305-donna32.c
@@ -10,7 +10,8 @@
#include <asm/unaligned.h>
#include <crypto/internal/poly1305.h>
-void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
+void poly1305_core_setkey(struct poly1305_core_key *key,
+ const u8 raw_key[POLY1305_BLOCK_SIZE])
{
/* r &= 0xffffffc0ffffffc0ffffffc0fffffff */
key->key.r[0] = (get_unaligned_le32(&raw_key[0])) & 0x3ffffff;
diff --git a/lib/crypto/poly1305-donna64.c b/lib/crypto/poly1305-donna64.c
index 6ae181bb4345..d34cf4053668 100644
--- a/lib/crypto/poly1305-donna64.c
+++ b/lib/crypto/poly1305-donna64.c
@@ -12,7 +12,8 @@
typedef __uint128_t u128;
-void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
+void poly1305_core_setkey(struct poly1305_core_key *key,
+ const u8 raw_key[POLY1305_BLOCK_SIZE])
{
u64 t0, t1;
diff --git a/lib/crypto/poly1305.c b/lib/crypto/poly1305.c
index 9d2d14df0fee..26d87fc3823e 100644
--- a/lib/crypto/poly1305.c
+++ b/lib/crypto/poly1305.c
@@ -12,7 +12,8 @@
#include <linux/module.h>
#include <asm/unaligned.h>
-void poly1305_init_generic(struct poly1305_desc_ctx *desc, const u8 *key)
+void poly1305_init_generic(struct poly1305_desc_ctx *desc,
+ const u8 key[POLY1305_KEY_SIZE])
{
poly1305_core_setkey(&desc->core_r, key);
desc->s[0] = get_unaligned_le32(key + 16);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 247/677] crypto: qat - fix error path in adf_isr_resource_alloc()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (245 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 246/677] crypto: poly1305 - fix poly1305_core_setkey() declaration Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 248/677] usb: gadget: aspeed: fix dma map failure Greg Kroah-Hartman
` (436 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Cabiddu, Marco Chiappero,
Herbert Xu, Sasha Levin
From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
[ Upstream commit 83dc1173d73f80cbce2fee4d308f51f87b2f26ae ]
The function adf_isr_resource_alloc() is not unwinding correctly in case
of error.
This patch fixes the error paths and propagate the errors to the caller.
Fixes: 7afa232e76ce ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_isr.c | 29 ++++++++++++++++++-------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_isr.c b/drivers/crypto/qat/qat_common/adf_isr.c
index c45853463530..e3ad5587be49 100644
--- a/drivers/crypto/qat/qat_common/adf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_isr.c
@@ -291,19 +291,32 @@ int adf_isr_resource_alloc(struct adf_accel_dev *accel_dev)
ret = adf_isr_alloc_msix_entry_table(accel_dev);
if (ret)
- return ret;
- if (adf_enable_msix(accel_dev))
goto err_out;
- if (adf_setup_bh(accel_dev))
- goto err_out;
+ ret = adf_enable_msix(accel_dev);
+ if (ret)
+ goto err_free_msix_table;
- if (adf_request_irqs(accel_dev))
- goto err_out;
+ ret = adf_setup_bh(accel_dev);
+ if (ret)
+ goto err_disable_msix;
+
+ ret = adf_request_irqs(accel_dev);
+ if (ret)
+ goto err_cleanup_bh;
return 0;
+
+err_cleanup_bh:
+ adf_cleanup_bh(accel_dev);
+
+err_disable_msix:
+ adf_disable_msix(&accel_dev->accel_pci_dev);
+
+err_free_msix_table:
+ adf_isr_free_msix_entry_table(accel_dev);
+
err_out:
- adf_isr_resource_free(accel_dev);
- return -EFAULT;
+ return ret;
}
EXPORT_SYMBOL_GPL(adf_isr_resource_alloc);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 248/677] usb: gadget: aspeed: fix dma map failure
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (246 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 247/677] crypto: qat - fix error path in adf_isr_resource_alloc() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 249/677] USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR() Greg Kroah-Hartman
` (435 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joel Stanley, Tao Ren, Sasha Levin
From: Tao Ren <rentao.bupt@gmail.com>
[ Upstream commit bd4d607044b961cecbf8c4c2f3bb5da4fb156993 ]
Currently the virtual port_dev device is passed to DMA API, and this is
wrong because the device passed to DMA API calls must be the actual
hardware device performing the DMA.
The patch replaces usb_gadget_map_request/usb_gadget_unmap_request APIs
with usb_gadget_map_request_by_dev/usb_gadget_unmap_request_by_dev APIs
so the DMA capable platform device can be passed to the DMA APIs.
The patch fixes below backtrace detected on Facebook AST2500 OpenBMC
platforms:
[<80106550>] show_stack+0x20/0x24
[<80106868>] dump_stack+0x28/0x30
[<80823540>] __warn+0xfc/0x110
[<8011ac30>] warn_slowpath_fmt+0xb0/0xc0
[<8011ad44>] dma_map_page_attrs+0x24c/0x314
[<8016a27c>] usb_gadget_map_request_by_dev+0x100/0x1e4
[<805cedd8>] usb_gadget_map_request+0x1c/0x20
[<805cefbc>] ast_vhub_epn_queue+0xa0/0x1d8
[<7f02f710>] usb_ep_queue+0x48/0xc4
[<805cd3e8>] ecm_do_notify+0xf8/0x248
[<7f145920>] ecm_set_alt+0xc8/0x1d0
[<7f145c34>] composite_setup+0x680/0x1d30
[<7f00deb8>] ast_vhub_ep0_handle_setup+0xa4/0x1bc
[<7f02ee94>] ast_vhub_dev_irq+0x58/0x84
[<7f0309e0>] ast_vhub_irq+0xb0/0x1c8
[<7f02e118>] __handle_irq_event_percpu+0x50/0x19c
[<8015e5bc>] handle_irq_event_percpu+0x38/0x8c
[<8015e758>] handle_irq_event+0x38/0x4c
Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20210331045831.28700-1-rentao.bupt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/aspeed-vhub/core.c | 3 ++-
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index be7bb64e3594..d11d3d14313f 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -36,6 +36,7 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
int status)
{
bool internal = req->internal;
+ struct ast_vhub *vhub = ep->vhub;
EPVDBG(ep, "completing request @%p, status %d\n", req, status);
@@ -46,7 +47,7 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
if (req->req.dma) {
if (!WARN_ON(!ep->dev))
- usb_gadget_unmap_request(&ep->dev->gadget,
+ usb_gadget_unmap_request_by_dev(&vhub->pdev->dev,
&req->req, ep->epn.is_in);
req->req.dma = 0;
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 02d8bfae58fb..cb164c615e6f 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -376,7 +376,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
if (ep->epn.desc_mode ||
((((unsigned long)u_req->buf & 7) == 0) &&
(ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) {
- rc = usb_gadget_map_request(&ep->dev->gadget, u_req,
+ rc = usb_gadget_map_request_by_dev(&vhub->pdev->dev, u_req,
ep->epn.is_in);
if (rc) {
dev_warn(&vhub->pdev->dev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 249/677] USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (247 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 248/677] usb: gadget: aspeed: fix dma map failure Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 250/677] drivers: nvmem: Fix voltage settings for QTI qfprom-efuse Greg Kroah-Hartman
` (434 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 2e3d055bf27d70204cae349335a62a4f9b7c165a ]
IS_ERR() and PTR_ERR() use wrong pointer, it should be
udc->virt_addr, fix it.
Fixes: 1b9f35adb0ff ("usb: gadget: udc: Add Synopsys UDC Platform driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210330130159.1051979-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/snps_udc_plat.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 32f1d3e90c26..99805d60a7ab 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -114,8 +114,8 @@ static int udc_plat_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
udc->virt_addr = devm_ioremap_resource(dev, res);
- if (IS_ERR(udc->regs))
- return PTR_ERR(udc->regs);
+ if (IS_ERR(udc->virt_addr))
+ return PTR_ERR(udc->virt_addr);
/* udc csr registers base */
udc->csr = udc->virt_addr + UDC_CSR_ADDR;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 250/677] drivers: nvmem: Fix voltage settings for QTI qfprom-efuse
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (248 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 249/677] USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR() Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 251/677] nvmem: rmem: fix undefined reference to memremap Greg Kroah-Hartman
` (433 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Douglas Anderson, Ravi Kumar Bokka,
Srinivas Kandagatla, Sasha Levin
From: Ravi Kumar Bokka <rbokka@codeaurora.org>
[ Upstream commit 9ec4f4b0e9fd3ad4b9a38bddb75b516ea09f4628 ]
QFPROM controller hardware requires 1.8V min for fuse blowing.
So, this change sets the voltage to 1.8V, required to blow the fuse
for qfprom-efuse controller.
To disable fuse blowing, we set the voltage to 0V since this may
be a shared rail and may be able to run at a lower rate when we're
not blowing fuses.
Fixes: 93b4e49f8c86 ("nvmem: qfprom: Add fuse blowing support")
Reported-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvmem/qfprom.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 6cace24dfbf7..100d69d8f2e1 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -127,6 +127,16 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
{
int ret;
+ /*
+ * This may be a shared rail and may be able to run at a lower rate
+ * when we're not blowing fuses. At the moment, the regulator framework
+ * applies voltage constraints even on disabled rails, so remove our
+ * constraints and allow the rail to be adjusted by other users.
+ */
+ ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
+ if (ret)
+ dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
+
ret = regulator_disable(priv->vcc);
if (ret)
dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
@@ -172,6 +182,17 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
goto err_clk_prepared;
}
+ /*
+ * Hardware requires 1.8V min for fuse blowing; this may be
+ * a rail shared do don't specify a max--regulator constraints
+ * will handle.
+ */
+ ret = regulator_set_voltage(priv->vcc, 1800000, INT_MAX);
+ if (ret) {
+ dev_err(priv->dev, "Failed to set 1.8 voltage\n");
+ goto err_clk_rate_set;
+ }
+
ret = regulator_enable(priv->vcc);
if (ret) {
dev_err(priv->dev, "Failed to enable regulator\n");
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 251/677] nvmem: rmem: fix undefined reference to memremap
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (249 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 250/677] drivers: nvmem: Fix voltage settings for QTI qfprom-efuse Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 252/677] driver core: platform: Declare early_platform_cleanup() prototype Greg Kroah-Hartman
` (432 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot,
Nicolas Saenz Julienne, Srinivas Kandagatla, Sasha Levin
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[ Upstream commit cc1bc56fdc76a55bb8fae9a145a2e60bf22fb129 ]
Fix below error reporte by kernel test robot
rmem.c:(.text+0x14e): undefined reference to memremap
s390x-linux-gnu-ld: rmem.c:(.text+0x1b6): undefined reference to memunmap
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvmem/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 75d2594c16e1..267a0d9e99ba 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -272,6 +272,7 @@ config SPRD_EFUSE
config NVMEM_RMEM
tristate "Reserved Memory Based Driver Support"
+ depends on HAS_IOMEM
help
This driver maps reserved memory into an nvmem device. It might be
useful to expose information left by firmware in memory.
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 252/677] driver core: platform: Declare early_platform_cleanup() prototype
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (250 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 251/677] nvmem: rmem: fix undefined reference to memremap Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 253/677] ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level Greg Kroah-Hartman
` (431 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Andy Shevchenko, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 1768289b44bae847612751d418fc5c5e680b5e5c ]
Compiler is not happy:
CC drivers/base/platform.o
drivers/base/platform.c:1557:20: warning: no previous prototype for ‘early_platform_cleanup’ [-Wmissing-prototypes]
1557 | void __weak __init early_platform_cleanup(void) { }
| ^~~~~~~~~~~~~~~~~~~~~~
Declare early_platform_cleanup() prototype in the header to make everyone happy.
Fixes: eecd37e105f0 ("drivers: Fix boot problem on SuperH")
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210331150525.59223-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/platform_device.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 3f23f6e430bf..cd81e060863c 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -359,4 +359,7 @@ static inline int is_sh_early_platform_device(struct platform_device *pdev)
}
#endif /* CONFIG_SUPERH */
+/* For now only SuperH uses it */
+void early_platform_cleanup(void);
+
#endif /* _PLATFORM_DEVICE_H_ */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 253/677] ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (251 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 252/677] driver core: platform: Declare early_platform_cleanup() prototype Greg Kroah-Hartman
@ 2021-05-12 14:44 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 254/677] ARM: dts: qcom: msm8974-samsung-klte: " Greg Kroah-Hartman
` (430 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Iskren Chernev,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 9d816b423dab5b59beec5e39b97428feac599ba7 ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: 45dfa741df86 ("ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210303182816.137255-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 0cda654371ae..56ee02ceba7d 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -575,7 +575,7 @@
maxim,rcomp = /bits/ 8 <0x4d>;
interrupt-parent = <&msmgpio>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fuelgauge_pin>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 254/677] ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger level
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (252 preceding siblings ...)
2021-05-12 14:44 ` [PATCH 5.12 253/677] ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 255/677] memory: pl353: fix mask of ECC page_size config register Greg Kroah-Hartman
` (429 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Iskren Chernev,
Bjorn Andersson, Sasha Levin
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 5fde3361ba57a9b4eb560dabf859176909d61004 ]
The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU. The falling edge
interrupt will mostly work but it's not correct.
Fixes: da8d46992e67 ("ARM: dts: qcom: msm8974-klte: Add fuel gauge")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Iskren Chernev <iskren.chernev@gmail.com>
Tested-By: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210303182816.137255-2-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index a0f7f461f48c..2dadb836c5fe 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -717,7 +717,7 @@
maxim,rcomp = /bits/ 8 <0x56>;
interrupt-parent = <&pma8084_gpios>;
- interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fuelgauge_pin>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 255/677] memory: pl353: fix mask of ECC page_size config register
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (253 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 254/677] ARM: dts: qcom: msm8974-samsung-klte: " Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 256/677] soundwire: stream: fix memory leak in stream config error path Greg Kroah-Hartman
` (428 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, gexueyuan, Krzysztof Kozlowski, Sasha Levin
From: gexueyuan <gexueyuan@gmail.com>
[ Upstream commit 25dcca7fedcd4e31cb368ad846bfd738c0c6307c ]
The mask for page size of ECC Configuration Register should be 0x3,
according to the datasheet of PL353 smc.
Fixes: fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller")
Signed-off-by: gexueyuan <gexueyuan@gmail.com>
Link: https://lore.kernel.org/r/20210331031056.5326-1-gexueyuan@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memory/pl353-smc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 3b5b1045edd9..9c0a28416777 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -63,7 +63,7 @@
/* ECC memory config register specific constants */
#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC
#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2
-#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0xC
+#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0x3
#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \
(2 << 21)) /* UpdateRegs operation */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 256/677] soundwire: stream: fix memory leak in stream config error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (254 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 255/677] memory: pl353: fix mask of ECC page_size config register Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 257/677] m68k: mvme147,mvme16x: Dont wipe PCC timer config bits Greg Kroah-Hartman
` (427 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rander Wang, Keyon Jie,
Guennadi Liakhovetski, Pierre-Louis Bossart, Bard Liao,
Vinod Koul, Sasha Levin
From: Rander Wang <rander.wang@intel.com>
[ Upstream commit 48f17f96a81763c7c8bf5500460a359b9939359f ]
When stream config is failed, master runtime will release all
slave runtime in the slave_rt_list, but slave runtime is not
added to the list at this time. This patch frees slave runtime
in the config error path to fix the memory leak.
Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soundwire/stream.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 1099b5d1262b..a418c3c7001c 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1375,8 +1375,16 @@ int sdw_stream_add_slave(struct sdw_slave *slave,
}
ret = sdw_config_stream(&slave->dev, stream, stream_config, true);
- if (ret)
+ if (ret) {
+ /*
+ * sdw_release_master_stream will release s_rt in slave_rt_list in
+ * stream_error case, but s_rt is only added to slave_rt_list
+ * when sdw_config_stream is successful, so free s_rt explicitly
+ * when sdw_config_stream is failed.
+ */
+ kfree(s_rt);
goto stream_error;
+ }
list_add_tail(&s_rt->m_rt_node, &m_rt->slave_rt_list);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 257/677] m68k: mvme147,mvme16x: Dont wipe PCC timer config bits
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (255 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 256/677] soundwire: stream: fix memory leak in stream config error path Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 258/677] firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Greg Kroah-Hartman
` (426 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Pavone, Finn Thain,
Geert Uytterhoeven, Sasha Levin
From: Finn Thain <fthain@telegraphics.com.au>
[ Upstream commit 43262178c043032e7c42d00de44c818ba05f9967 ]
Don't clear the timer 1 configuration bits when clearing the interrupt flag
and counter overflow. As Michael reported, "This results in no timer
interrupts being delivered after the first. Initialization then hangs
in calibrate_delay as the jiffies counter is not updated."
On mvme16x, enable the timer after requesting the irq, consistent with
mvme147.
Cc: Michael Pavone <pavone@retrodev.com>
Fixes: 7529b90d051e ("m68k: mvme147: Handle timer counter overflow")
Fixes: 19999a8b8782 ("m68k: mvme16x: Handle timer counter overflow")
Reported-and-tested-by: Michael Pavone <pavone@retrodev.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/4fdaa113db089b8fb607f7dd818479f8cdcc4547.1617089871.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/include/asm/mvme147hw.h | 3 +++
arch/m68k/mvme147/config.c | 14 ++++++++------
arch/m68k/mvme16x/config.c | 14 ++++++++------
3 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/arch/m68k/include/asm/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h
index 257b29184af9..e28eb1c0e0bf 100644
--- a/arch/m68k/include/asm/mvme147hw.h
+++ b/arch/m68k/include/asm/mvme147hw.h
@@ -66,6 +66,9 @@ struct pcc_regs {
#define PCC_INT_ENAB 0x08
#define PCC_TIMER_INT_CLR 0x80
+
+#define PCC_TIMER_TIC_EN 0x01
+#define PCC_TIMER_COC_EN 0x02
#define PCC_TIMER_CLR_OVF 0x04
#define PCC_LEVEL_ABORT 0x07
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index cfdc7f912e14..e1e90c49a496 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -114,8 +114,10 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
unsigned long flags;
local_irq_save(flags);
- m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
- m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF;
+ m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF | PCC_TIMER_COC_EN |
+ PCC_TIMER_TIC_EN;
+ m147_pcc->t1_int_cntrl = PCC_INT_ENAB | PCC_TIMER_INT_CLR |
+ PCC_LEVEL_TIMER1;
clk_total += PCC_TIMER_CYCLES;
legacy_timer_tick(1);
local_irq_restore(flags);
@@ -133,10 +135,10 @@ void mvme147_sched_init (void)
/* Init the clock with a value */
/* The clock counter increments until 0xFFFF then reloads */
m147_pcc->t1_preload = PCC_TIMER_PRELOAD;
- m147_pcc->t1_cntrl = 0x0; /* clear timer */
- m147_pcc->t1_cntrl = 0x3; /* start timer */
- m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR; /* clear pending ints */
- m147_pcc->t1_int_cntrl = PCC_INT_ENAB|PCC_LEVEL_TIMER1;
+ m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF | PCC_TIMER_COC_EN |
+ PCC_TIMER_TIC_EN;
+ m147_pcc->t1_int_cntrl = PCC_INT_ENAB | PCC_TIMER_INT_CLR |
+ PCC_LEVEL_TIMER1;
clocksource_register_hz(&mvme147_clk, PCC_TIMER_CLOCK_FREQ);
}
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 30357fe4ba6c..b59593c7cfb9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -366,6 +366,7 @@ static u32 clk_total;
#define PCCTOVR1_COC_EN 0x02
#define PCCTOVR1_OVR_CLR 0x04
+#define PCCTIC1_INT_LEVEL 6
#define PCCTIC1_INT_CLR 0x08
#define PCCTIC1_INT_EN 0x10
@@ -374,8 +375,8 @@ static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
unsigned long flags;
local_irq_save(flags);
- out_8(PCCTIC1, in_8(PCCTIC1) | PCCTIC1_INT_CLR);
- out_8(PCCTOVR1, PCCTOVR1_OVR_CLR);
+ out_8(PCCTOVR1, PCCTOVR1_OVR_CLR | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
+ out_8(PCCTIC1, PCCTIC1_INT_EN | PCCTIC1_INT_CLR | PCCTIC1_INT_LEVEL);
clk_total += PCC_TIMER_CYCLES;
legacy_timer_tick(1);
local_irq_restore(flags);
@@ -389,14 +390,15 @@ void mvme16x_sched_init(void)
int irq;
/* Using PCCchip2 or MC2 chip tick timer 1 */
- out_be32(PCCTCNT1, 0);
- out_be32(PCCTCMP1, PCC_TIMER_CYCLES);
- out_8(PCCTOVR1, in_8(PCCTOVR1) | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
- out_8(PCCTIC1, PCCTIC1_INT_EN | 6);
if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, IRQF_TIMER, "timer",
NULL))
panic ("Couldn't register timer int");
+ out_be32(PCCTCNT1, 0);
+ out_be32(PCCTCMP1, PCC_TIMER_CYCLES);
+ out_8(PCCTOVR1, PCCTOVR1_OVR_CLR | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
+ out_8(PCCTIC1, PCCTIC1_INT_EN | PCCTIC1_INT_CLR | PCCTIC1_INT_LEVEL);
+
clocksource_register_hz(&mvme16x_clk, PCC_TIMER_CLOCK_FREQ);
if (brdno == 0x0162 || brdno == 0x172)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 258/677] firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (256 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 257/677] m68k: mvme147,mvme16x: Dont wipe PCC timer config bits Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 259/677] firmware: qcom_scm: Reduce locking section for __get_convention() Greg Kroah-Hartman
` (425 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bjorn Andersson, Elliot Berman,
Brian Masney, Stephan Gerhold, Jeffrey Hugo, Douglas Anderson,
Stephen Boyd, Sasha Levin
From: Stephen Boyd <swboyd@chromium.org>
[ Upstream commit 9d11af8b06a811c5c4878625f51ce109e2af4e80 ]
Make __qcom_scm_is_call_available() return bool instead of int. The
function has "is" in the name, so it should return a bool to indicate
the truth of the call being available. Unfortunately, it can return a
number < 0 which also looks "true", but not all callers expect that and
thus they think a call is available when really the check to see if the
call is available failed to figure it out.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 0f206514749b ("scsi: firmware: qcom_scm: Add support for programming inline crypto keys")
Fixes: 0434a4061471 ("firmware: qcom: scm: add support to restore secure config to qcm_scm-32")
Fixes: b0a1614fb1f5 ("firmware: qcom: scm: add OCMEM lock/unlock interface")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/qcom_scm.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index f57779fc7ee9..2be5573dce53 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -113,9 +113,6 @@ static void qcom_scm_clk_disable(void)
clk_disable_unprepare(__scm->bus_clk);
}
-static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
- u32 cmd_id);
-
enum qcom_scm_convention qcom_scm_convention;
static bool has_queried __read_mostly;
static DEFINE_SPINLOCK(query_lock);
@@ -219,8 +216,8 @@ static int qcom_scm_call_atomic(struct device *dev,
}
}
-static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
- u32 cmd_id)
+static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id)
{
int ret;
struct qcom_scm_desc desc = {
@@ -247,7 +244,7 @@ static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
ret = qcom_scm_call(dev, &desc, &res);
- return ret ? : res.result[0];
+ return ret ? false : !!res.result[0];
}
/**
@@ -585,9 +582,8 @@ bool qcom_scm_pas_supported(u32 peripheral)
};
struct qcom_scm_res res;
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PIL_PAS_IS_SUPPORTED);
- if (ret <= 0)
+ if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED))
return false;
ret = qcom_scm_call(__scm->dev, &desc, &res);
@@ -1060,17 +1056,18 @@ EXPORT_SYMBOL(qcom_scm_ice_set_key);
*/
bool qcom_scm_hdcp_available(void)
{
+ bool avail;
int ret = qcom_scm_clk_enable();
if (ret)
return ret;
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+ avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
QCOM_SCM_HDCP_INVOKE);
qcom_scm_clk_disable();
- return ret > 0;
+ return avail;
}
EXPORT_SYMBOL(qcom_scm_hdcp_available);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 259/677] firmware: qcom_scm: Reduce locking section for __get_convention()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (257 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 258/677] firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 260/677] firmware: qcom_scm: Workaround lack of "is available" call on SC7180 Greg Kroah-Hartman
` (424 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Elliot Berman, Brian Masney,
Stephan Gerhold, Jeffrey Hugo, Douglas Anderson, Stephen Boyd,
Bjorn Andersson, Sasha Levin
From: Stephen Boyd <swboyd@chromium.org>
[ Upstream commit f6ea568f0ddcdfad52807110ed8983e610f0e03b ]
We shouldn't need to hold this spinlock here around the entire SCM call
into the firmware and back. Instead, we should be able to query the
firmware, potentially in parallel with other CPUs making the same
convention detection firmware call, and then grab the lock to update the
calling convention detected. The convention doesn't change at runtime so
calling into firmware more than once is possibly wasteful but simpler.
Besides, this is the slow path, not the fast path where we've already
detected the convention used.
More importantly, this allows us to add more logic here to workaround
the case where the firmware call to check for availability isn't
implemented in the firmware at all. In that case we can check the
firmware node compatible string and force a calling convention.
Note that we remove the 'has_queried' logic that is repeated twice. That
could lead to the calling convention being printed multiple times to the
kernel logs if the bool is true but __query_convention() is running on
multiple CPUs. We also shorten the time where the lock is held, but we
keep the lock held around the printk because it doesn't seem hugely
important to drop it for that.
Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-3-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/qcom_scm-smc.c | 12 ++++---
drivers/firmware/qcom_scm.c | 55 ++++++++++++++++-----------------
drivers/firmware/qcom_scm.h | 7 +++--
3 files changed, 39 insertions(+), 35 deletions(-)
diff --git a/drivers/firmware/qcom_scm-smc.c b/drivers/firmware/qcom_scm-smc.c
index 497c13ba98d6..d111833364ba 100644
--- a/drivers/firmware/qcom_scm-smc.c
+++ b/drivers/firmware/qcom_scm-smc.c
@@ -77,8 +77,10 @@ static void __scm_smc_do(const struct arm_smccc_args *smc,
} while (res->a0 == QCOM_SCM_V2_EBUSY);
}
-int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res, bool atomic)
+
+int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+ enum qcom_scm_convention qcom_convention,
+ struct qcom_scm_res *res, bool atomic)
{
int arglen = desc->arginfo & 0xf;
int i;
@@ -87,9 +89,8 @@ int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
size_t alloc_len;
gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL;
u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL;
- u32 qcom_smccc_convention =
- (qcom_scm_convention == SMC_CONVENTION_ARM_32) ?
- ARM_SMCCC_SMC_32 : ARM_SMCCC_SMC_64;
+ u32 qcom_smccc_convention = (qcom_convention == SMC_CONVENTION_ARM_32) ?
+ ARM_SMCCC_SMC_32 : ARM_SMCCC_SMC_64;
struct arm_smccc_res smc_res;
struct arm_smccc_args smc = {0};
@@ -148,4 +149,5 @@ int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
}
return (long)smc_res.a0 ? qcom_scm_remap_error(smc_res.a0) : 0;
+
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 2be5573dce53..21e07a464bd9 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -113,11 +113,10 @@ static void qcom_scm_clk_disable(void)
clk_disable_unprepare(__scm->bus_clk);
}
-enum qcom_scm_convention qcom_scm_convention;
-static bool has_queried __read_mostly;
-static DEFINE_SPINLOCK(query_lock);
+enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN;
+static DEFINE_SPINLOCK(scm_query_lock);
-static void __query_convention(void)
+static enum qcom_scm_convention __get_convention(void)
{
unsigned long flags;
struct qcom_scm_desc desc = {
@@ -130,36 +129,36 @@ static void __query_convention(void)
.owner = ARM_SMCCC_OWNER_SIP,
};
struct qcom_scm_res res;
+ enum qcom_scm_convention probed_convention;
int ret;
- spin_lock_irqsave(&query_lock, flags);
- if (has_queried)
- goto out;
+ if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN))
+ return qcom_scm_convention;
- qcom_scm_convention = SMC_CONVENTION_ARM_64;
- // Device isn't required as there is only one argument - no device
- // needed to dma_map_single to secure world
- ret = scm_smc_call(NULL, &desc, &res, true);
+ /*
+ * Device isn't required as there is only one argument - no device
+ * needed to dma_map_single to secure world
+ */
+ probed_convention = SMC_CONVENTION_ARM_64;
+ ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
if (!ret && res.result[0] == 1)
- goto out;
+ goto found;
- qcom_scm_convention = SMC_CONVENTION_ARM_32;
- ret = scm_smc_call(NULL, &desc, &res, true);
+ probed_convention = SMC_CONVENTION_ARM_32;
+ ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
if (!ret && res.result[0] == 1)
- goto out;
-
- qcom_scm_convention = SMC_CONVENTION_LEGACY;
-out:
- has_queried = true;
- spin_unlock_irqrestore(&query_lock, flags);
- pr_info("qcom_scm: convention: %s\n",
- qcom_scm_convention_names[qcom_scm_convention]);
-}
+ goto found;
+
+ probed_convention = SMC_CONVENTION_LEGACY;
+found:
+ spin_lock_irqsave(&scm_query_lock, flags);
+ if (probed_convention != qcom_scm_convention) {
+ qcom_scm_convention = probed_convention;
+ pr_info("qcom_scm: convention: %s\n",
+ qcom_scm_convention_names[qcom_scm_convention]);
+ }
+ spin_unlock_irqrestore(&scm_query_lock, flags);
-static inline enum qcom_scm_convention __get_convention(void)
-{
- if (unlikely(!has_queried))
- __query_convention();
return qcom_scm_convention;
}
@@ -1239,7 +1238,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
__scm = scm;
__scm->dev = &pdev->dev;
- __query_convention();
+ __get_convention();
/*
* If requested enable "download mode", from this point on warmboot
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 95cd1ac30ab0..632fe3142462 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -61,8 +61,11 @@ struct qcom_scm_res {
};
#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
-extern int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res, bool atomic);
+extern int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+ enum qcom_scm_convention qcom_convention,
+ struct qcom_scm_res *res, bool atomic);
+#define scm_smc_call(dev, desc, res, atomic) \
+ __scm_smc_call((dev), (desc), qcom_scm_convention, (res), (atomic))
#define SCM_LEGACY_FNID(s, c) (((s) << 10) | ((c) & 0x3ff))
extern int scm_legacy_call_atomic(struct device *dev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 260/677] firmware: qcom_scm: Workaround lack of "is available" call on SC7180
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (258 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 259/677] firmware: qcom_scm: Reduce locking section for __get_convention() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 261/677] iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol Greg Kroah-Hartman
` (423 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Elliot Berman, Brian Masney,
Stephan Gerhold, Jeffrey Hugo, Douglas Anderson, Stephen Boyd,
Bjorn Andersson, Sasha Levin
From: Stephen Boyd <swboyd@chromium.org>
[ Upstream commit 257f2935cbbf14b16912c635fcd8ff43345c953b ]
Some SC7180 firmwares don't implement the QCOM_SCM_INFO_IS_CALL_AVAIL
API, so we can't probe the calling convention. We detect the legacy
calling convention on these firmwares, because the availability call
always fails and legacy is the fallback. This leads to problems where
the rmtfs driver fails to probe, because it tries to assign memory with
a bad calling convention, which then leads to modem failing to load and
all networking, even wifi, to fail. Ouch!
Let's force the calling convention to be what it always is on this SoC,
i.e. arm64. Of course, the calling convention is not the same thing as
implementing the QCOM_SCM_INFO_IS_CALL_AVAIL API. The absence of the "is
this call available" API from the firmware means that any call to
__qcom_scm_is_call_available() fails. This is OK for now though because
none of the calls that are checked for existence are implemented on
firmware running on sc7180. If such a call needs to be checked for
existence in the future, we presume that firmware will implement this
API and then things will "just work".
Cc: Elliot Berman <eberman@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210223214539.1336155-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/qcom_scm.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 21e07a464bd9..9ac84b5d6ce0 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -131,6 +131,7 @@ static enum qcom_scm_convention __get_convention(void)
struct qcom_scm_res res;
enum qcom_scm_convention probed_convention;
int ret;
+ bool forced = false;
if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN))
return qcom_scm_convention;
@@ -144,6 +145,18 @@ static enum qcom_scm_convention __get_convention(void)
if (!ret && res.result[0] == 1)
goto found;
+ /*
+ * Some SC7180 firmwares didn't implement the
+ * QCOM_SCM_INFO_IS_CALL_AVAIL call, so we fallback to forcing ARM_64
+ * calling conventions on these firmwares. Luckily we don't make any
+ * early calls into the firmware on these SoCs so the device pointer
+ * will be valid here to check if the compatible matches.
+ */
+ if (of_device_is_compatible(__scm ? __scm->dev->of_node : NULL, "qcom,scm-sc7180")) {
+ forced = true;
+ goto found;
+ }
+
probed_convention = SMC_CONVENTION_ARM_32;
ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
if (!ret && res.result[0] == 1)
@@ -154,8 +167,9 @@ found:
spin_lock_irqsave(&scm_query_lock, flags);
if (probed_convention != qcom_scm_convention) {
qcom_scm_convention = probed_convention;
- pr_info("qcom_scm: convention: %s\n",
- qcom_scm_convention_names[qcom_scm_convention]);
+ pr_info("qcom_scm: convention: %s%s\n",
+ qcom_scm_convention_names[qcom_scm_convention],
+ forced ? " (forced)" : "");
}
spin_unlock_irqrestore(&scm_query_lock, flags);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 261/677] iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (259 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 260/677] firmware: qcom_scm: Workaround lack of "is available" call on SC7180 Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 262/677] mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init Greg Kroah-Hartman
` (422 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Alexandru Ardelean,
Jonathan Cameron, Sasha Levin
From: Alexandru Ardelean <aardelean@deviqon.com>
[ Upstream commit 194eafc9c1d49b53b59de9821fb63d423344cae3 ]
Because a dependency on HAS_IOMEM and OF was added for the ADI AXI ADC
driver, this makes the AD9467 driver have some build/dependency issues
when OF is disabled (typically on ACPI archs like x86).
This is because the selection of the AD9467 enforces the ADI_AXI_ADC symbol
which is blocked by the OF (and potentially HAS_IOMEM) being disabled.
To fix this, we make the AD9467 driver depend on the ADI_AXI_ADC symbol.
The AD9467 driver cannot operate on it's own. It requires the ADI AXI ADC
driver to stream data (or some similar IIO interface).
So, the fix here is to make the AD9467 symbol depend on the ADI_AXI_ADC
symbol. At some point this could become it's own subgroup of high-speed
ADCs.
Fixes: be24c65e9fa24 ("iio: adc: adi-axi-adc: add proper Kconfig dependencies")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210324182746.9337-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index e0667c4b3c08..dda0f1e37ec1 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -249,7 +249,7 @@ config AD799X
config AD9467
tristate "Analog Devices AD9467 High Speed ADC driver"
depends on SPI
- select ADI_AXI_ADC
+ depends on ADI_AXI_ADC
help
Say yes here to build support for Analog Devices:
* AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 262/677] mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (260 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 261/677] iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 263/677] irqchip/gic-v3: Fix OF_BAD_ADDR error handling Greg Kroah-Hartman
` (421 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Miquel Raynal, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 076de75de1e53160e9b099f75872c1f9adf41a0b ]
If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this->raw_buffer, gpmi_free_dma_buffer() will be called to free
this->auxiliary_virt. But this->auxiliary_virt is still a non-NULL
and valid ptr.
Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this->auxiliary_virt in err_out. This causes
a double free.
As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.
Fixes: 4d02423e9afe6 ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 3fa8c22d3f36..4d08e4ab5c1b 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2449,7 +2449,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
this->bch_geometry.auxiliary_size = 128;
ret = gpmi_alloc_dma_buffer(this);
if (ret)
- goto err_out;
+ return ret;
nand_controller_init(&this->base);
this->base.ops = &gpmi_nand_controller_ops;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 263/677] irqchip/gic-v3: Fix OF_BAD_ADDR error handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (261 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 262/677] mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 264/677] staging: comedi: tests: ni_routes_test: Fix compilation error Greg Kroah-Hartman
` (420 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Marc Zyngier, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 8e13d96670a4c050d4883e6743a9e9858e5cfe10 ]
When building with extra warnings enabled, clang points out a
mistake in the error handling:
drivers/irqchip/irq-gic-v3-mbi.c:306:21: error: result of comparison of constant 18446744073709551615 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (mbi_phys_base == OF_BAD_ADDR) {
Truncate the constant to the same type as the variable it gets compared
to, to shut make the check work and void the warning.
Fixes: 505287525c24 ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323131842.2773094-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-gic-v3-mbi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic-v3-mbi.c b/drivers/irqchip/irq-gic-v3-mbi.c
index 563a9b366294..e81e89a81cb5 100644
--- a/drivers/irqchip/irq-gic-v3-mbi.c
+++ b/drivers/irqchip/irq-gic-v3-mbi.c
@@ -303,7 +303,7 @@ int __init mbi_init(struct fwnode_handle *fwnode, struct irq_domain *parent)
reg = of_get_property(np, "mbi-alias", NULL);
if (reg) {
mbi_phys_base = of_translate_address(np, reg);
- if (mbi_phys_base == OF_BAD_ADDR) {
+ if (mbi_phys_base == (phys_addr_t)OF_BAD_ADDR) {
ret = -ENXIO;
goto err_free_mbi;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 264/677] staging: comedi: tests: ni_routes_test: Fix compilation error
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (262 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 263/677] irqchip/gic-v3: Fix OF_BAD_ADDR error handling Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 265/677] staging: rtl8192u: Fix potential infinite loop Greg Kroah-Hartman
` (419 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Spencer E. Olson, Ian Abbott, Sasha Levin
From: Ian Abbott <abbotti@mev.co.uk>
[ Upstream commit 6db58ed2b2d9bb1792eace4f9aa70e8bdd730ffc ]
The `ni_routes_test` module is not currently selectable using the
Kconfig files, but can be built by specifying `CONFIG_COMEDI_TESTS=m` on
the "make" command line. It currently fails to compile due to an extra
parameter added to the `ni_assign_device_routes` function by
commit e3b7ce73c578 ("staging: comedi: ni_routes: Allow alternate board
name for routes"). Fix it by supplying the value `NULL` for the added
`alt_board_name` parameter (which specifies that there is no alternate
board name).
Fixes: e3b7ce73c578 ("staging: comedi: ni_routes: Allow alternate board name for routes")
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210407140142.447250-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/comedi/drivers/tests/ni_routes_test.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/tests/ni_routes_test.c b/drivers/staging/comedi/drivers/tests/ni_routes_test.c
index 4061b3b5f8e9..68defeb53de4 100644
--- a/drivers/staging/comedi/drivers/tests/ni_routes_test.c
+++ b/drivers/staging/comedi/drivers/tests/ni_routes_test.c
@@ -217,7 +217,8 @@ void test_ni_assign_device_routes(void)
const u8 *table, *oldtable;
init_pci_6070e();
- ni_assign_device_routes(ni_eseries, pci_6070e, &private.routing_tables);
+ ni_assign_device_routes(ni_eseries, pci_6070e, NULL,
+ &private.routing_tables);
devroutes = private.routing_tables.valid_routes;
table = private.routing_tables.route_values;
@@ -253,7 +254,8 @@ void test_ni_assign_device_routes(void)
olddevroutes = devroutes;
oldtable = table;
init_pci_6220();
- ni_assign_device_routes(ni_mseries, pci_6220, &private.routing_tables);
+ ni_assign_device_routes(ni_mseries, pci_6220, NULL,
+ &private.routing_tables);
devroutes = private.routing_tables.valid_routes;
table = private.routing_tables.route_values;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 265/677] staging: rtl8192u: Fix potential infinite loop
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (263 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 264/677] staging: comedi: tests: ni_routes_test: Fix compilation error Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 266/677] staging: fwserial: fix TIOCSSERIAL implementation Greg Kroah-Hartman
` (418 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Colin Ian King, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit f9b9263a25dc3d2eaaa829e207434db6951ca7bc ]
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of riv->ieee80211->LinkDetectInfo.SlotNum
that is a u16 type. There is a potential infinite loop if SlotNum
is larger than the u8 loop counter. Fix this by making the loop
counter the same type as SlotNum.
Addresses-Coverity: ("Infinite loop")
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210407150308.496623-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/rtl8192u/r8192U_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9fc4adc83d77..b5a313649f44 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -3210,7 +3210,7 @@ static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
u32 *TotalRxDataNum)
{
u16 SlotIndex;
- u8 i;
+ u16 i;
*TotalRxBcnNum = 0;
*TotalRxDataNum = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 266/677] staging: fwserial: fix TIOCSSERIAL implementation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (264 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 265/677] staging: rtl8192u: Fix potential infinite loop Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 267/677] staging: fwserial: fix TIOCGSERIAL implementation Greg Kroah-Hartman
` (417 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit a7eaaa9d1032e68669bb479496087ba8fc155ab6 ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the fwserial implementation which was returning -EPERM also for a
privileged user when trying to change certain unsupported parameters,
and instead return success consistently.
Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/fwserial/fwserial.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index 440d11423812..2888b80a2c1a 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -1234,10 +1234,6 @@ static int set_serial_info(struct tty_struct *tty,
struct fwtty_port *port = tty->driver_data;
unsigned int cdelay;
- if (ss->irq != 0 || ss->port != 0 || ss->custom_divisor != 0 ||
- ss->baud_base != 400000000)
- return -EPERM;
-
cdelay = msecs_to_jiffies(ss->close_delay * 10);
mutex_lock(&port->port.mutex);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 267/677] staging: fwserial: fix TIOCGSERIAL implementation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (265 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 266/677] staging: fwserial: fix TIOCSSERIAL implementation Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 268/677] staging: greybus: uart: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
` (416 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 5e84a66f3682af4f177bb24bb2ad5135c51f764a ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Fix the fwserial implementation by dropping its custom interpretation of
the unused xmit_fifo_size field, which was overflowed with the driver
FIFO size. Also leave the type and flags fields unset as these cannot be
changed.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
closing_wait, but let's report back the default value actually used (30
seconds).
Fixes: 7355ba3445f2 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/fwserial/fwserial.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index 2888b80a2c1a..0f4655d7d520 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -1218,13 +1218,12 @@ static int get_serial_info(struct tty_struct *tty,
struct fwtty_port *port = tty->driver_data;
mutex_lock(&port->port.mutex);
- ss->type = PORT_UNKNOWN;
- ss->line = port->port.tty->index;
- ss->flags = port->port.flags;
- ss->xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN;
+ ss->line = port->index;
ss->baud_base = 400000000;
ss->close_delay = jiffies_to_msecs(port->port.close_delay) / 10;
+ ss->closing_wait = 3000;
mutex_unlock(&port->port.mutex);
+
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 268/677] staging: greybus: uart: fix unprivileged TIOCCSERIAL
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (266 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 267/677] staging: fwserial: fix TIOCGSERIAL implementation Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 269/677] platform/x86: dell-wmi-sysman: Make init_bios_attributes() ACPI object parsing more robust Greg Kroah-Hartman
` (415 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 60c6b305c11b5fd167ce5e2ce42f3a9098c388f0 ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the greybus implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: e68453ed28c5 ("greybus: uart-gb: now builds, more framework added")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/greybus/uart.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 29846dc1e1bf..a520f7f213db 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -641,8 +641,6 @@ static int set_serial_info(struct tty_struct *tty,
if ((close_delay != gb_tty->port.close_delay) ||
(closing_wait != gb_tty->port.closing_wait))
retval = -EPERM;
- else
- retval = -EOPNOTSUPP;
} else {
gb_tty->port.close_delay = close_delay;
gb_tty->port.closing_wait = closing_wait;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 269/677] platform/x86: dell-wmi-sysman: Make init_bios_attributes() ACPI object parsing more robust
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (267 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 268/677] staging: greybus: uart: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 270/677] soc: qcom: pdr: Fix error return code in pdr_register_listener Greg Kroah-Hartman
` (414 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Divya Bharathi, Mario Limonciello,
Hans de Goede, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 5e3f5973c8dfd2b80268f1825ed2f2ddf81d3267 ]
Make init_bios_attributes() ACPI object parsing more robust:
1. Always check that the type of the return ACPI object is package, rather
then only checking this for instance_id == 0
2. Check that the package has the minimum amount of elements which will
be consumed by the populate_foo_data() for the attr_type
Note/TODO: The populate_foo_data() functions should also be made more
robust. The should check the type of each of the elements matches the
type which they expect and in case of populate_enum_data()
obj->package.count should be passed to it as an argument and it should
re-check this itself since it consume a variable number of elements.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321121607.35717-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../x86/dell/dell-wmi-sysman/sysman.c | 32 ++++++++++++++++---
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
index 7410ccae650c..a90ae6ba4a73 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
@@ -399,6 +399,7 @@ static int init_bios_attributes(int attr_type, const char *guid)
union acpi_object *obj = NULL;
union acpi_object *elements;
struct kset *tmp_set;
+ int min_elements;
/* instance_id needs to be reset for each type GUID
* also, instance IDs are unique within GUID but not across
@@ -409,14 +410,38 @@ static int init_bios_attributes(int attr_type, const char *guid)
retval = alloc_attributes_data(attr_type);
if (retval)
return retval;
+
+ switch (attr_type) {
+ case ENUM: min_elements = 8; break;
+ case INT: min_elements = 9; break;
+ case STR: min_elements = 8; break;
+ case PO: min_elements = 4; break;
+ default:
+ pr_err("Error: Unknown attr_type: %d\n", attr_type);
+ return -EINVAL;
+ }
+
/* need to use specific instance_id and guid combination to get right data */
obj = get_wmiobj_pointer(instance_id, guid);
- if (!obj || obj->type != ACPI_TYPE_PACKAGE)
+ if (!obj)
return -ENODEV;
- elements = obj->package.elements;
mutex_lock(&wmi_priv.mutex);
- while (elements) {
+ while (obj) {
+ if (obj->type != ACPI_TYPE_PACKAGE) {
+ pr_err("Error: Expected ACPI-package type, got: %d\n", obj->type);
+ retval = -EIO;
+ goto err_attr_init;
+ }
+
+ if (obj->package.count < min_elements) {
+ pr_err("Error: ACPI-package does not have enough elements: %d < %d\n",
+ obj->package.count, min_elements);
+ goto nextobj;
+ }
+
+ elements = obj->package.elements;
+
/* sanity checking */
if (elements[ATTR_NAME].type != ACPI_TYPE_STRING) {
pr_debug("incorrect element type\n");
@@ -481,7 +506,6 @@ nextobj:
kfree(obj);
instance_id++;
obj = get_wmiobj_pointer(instance_id, guid);
- elements = obj ? obj->package.elements : NULL;
}
mutex_unlock(&wmi_priv.mutex);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 270/677] soc: qcom: pdr: Fix error return code in pdr_register_listener
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (268 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 269/677] platform/x86: dell-wmi-sysman: Make init_bios_attributes() ACPI object parsing more robust Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 271/677] PM / devfreq: Use more accurate returned new_freq as resume_freq Greg Kroah-Hartman
` (413 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Bjorn Andersson, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 769738fc49bb578e05d404b481a9241d18147d86 ]
Fix to return the error code -EREMOTEIO from pdr_register_listener
rather than 0.
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201125065034.154217-1-miaoqinglang@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/pdr_interface.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
index 209dcdca923f..915d5bc3d46e 100644
--- a/drivers/soc/qcom/pdr_interface.c
+++ b/drivers/soc/qcom/pdr_interface.c
@@ -153,7 +153,7 @@ static int pdr_register_listener(struct pdr_handle *pdr,
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
pr_err("PDR: %s register listener failed: 0x%x\n",
pds->service_path, resp.resp.error);
- return ret;
+ return -EREMOTEIO;
}
pds->state = resp.curr_state;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 271/677] PM / devfreq: Use more accurate returned new_freq as resume_freq
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (269 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 270/677] soc: qcom: pdr: Fix error return code in pdr_register_listener Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 272/677] clocksource/drivers/timer-ti-dm: Fix posted mode status check order Greg Kroah-Hartman
` (412 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dong Aisheng, Chanwoo Choi, Sasha Levin
From: Dong Aisheng <aisheng.dong@nxp.com>
[ Upstream commit 62453f1ba5d5def9d58e140a50f3f168f028da38 ]
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.
Fixes: 83f8ca45afbf0 ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/devfreq/devfreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index e4be0435c9ba..59ba59bea0f5 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -387,7 +387,7 @@ static int devfreq_set_target(struct devfreq *devfreq, unsigned long new_freq,
devfreq->previous_freq = new_freq;
if (devfreq->suspend_freq)
- devfreq->resume_freq = cur_freq;
+ devfreq->resume_freq = new_freq;
return err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 272/677] clocksource/drivers/timer-ti-dm: Fix posted mode status check order
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (270 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 271/677] PM / devfreq: Use more accurate returned new_freq as resume_freq Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 273/677] clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped Greg Kroah-Hartman
` (411 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lindgren, Daniel Lezcano, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit 212709926c5493a566ca4086ad4f4b0d4e66b553 ]
When the timer is configured in posted mode, we need to check the write-
posted status register (TWPS) before writing to the register.
We now check TWPS after the write starting with commit 52762fbd1c47
("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource
support").
For example, in the TRM for am571x the following is documented in chapter
"22.2.4.13.1.1 Write Posting Synchronization Mode":
"For each register, a status bit is provided in the timer write-posted
status (TWPS) register. In this mode, it is mandatory that software check
this status bit before any write access. If a write is attempted to a
register with a previous access pending, the previous access is discarded
without notice."
The regression happened when I updated the code to use standard read/write
accessors for the driver instead of using __omap_dm_timer_load_start().
We have__omap_dm_timer_load_start() check the TWPS status correctly using
__omap_dm_timer_write().
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210304072135.52712-2-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/timer-ti-dm-systimer.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 33b3e8aa2cc5..422376680c8a 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -449,13 +449,13 @@ static int dmtimer_set_next_event(unsigned long cycles,
struct dmtimer_systimer *t = &clkevt->t;
void __iomem *pend = t->base + t->pend;
- writel_relaxed(0xffffffff - cycles, t->base + t->counter);
while (readl_relaxed(pend) & WP_TCRR)
cpu_relax();
+ writel_relaxed(0xffffffff - cycles, t->base + t->counter);
- writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
while (readl_relaxed(pend) & WP_TCLR)
cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl);
return 0;
}
@@ -490,18 +490,18 @@ static int dmtimer_set_periodic(struct clock_event_device *evt)
dmtimer_clockevent_shutdown(evt);
/* Looks like we need to first set the load value separately */
- writel_relaxed(clkevt->period, t->base + t->load);
while (readl_relaxed(pend) & WP_TLDR)
cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->load);
- writel_relaxed(clkevt->period, t->base + t->counter);
while (readl_relaxed(pend) & WP_TCRR)
cpu_relax();
+ writel_relaxed(clkevt->period, t->base + t->counter);
- writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
- t->base + t->ctrl);
while (readl_relaxed(pend) & WP_TCLR)
cpu_relax();
+ writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+ t->base + t->ctrl);
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 273/677] clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (271 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 272/677] clocksource/drivers/timer-ti-dm: Fix posted mode status check order Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 274/677] clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() Greg Kroah-Hartman
` (410 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Lindgren, Daniel Lezcano, Sasha Levin
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit ac4daf737674b4d29e19b7c300caff3bcf7160d8 ]
To avoid spurious timer interrupts when KTIME_MAX is used, we need to
configure set_state_oneshot_stopped(). Although implementing this is
optional, it still affects things like power management for the extra
timer interrupt.
For more information, please see commit 8fff52fd5093 ("clockevents:
Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state") and commit cf8c5009ee37
("clockevents/drivers/arm_arch_timer: Implement
->set_state_oneshot_stopped()").
Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210304072135.52712-4-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/timer-ti-dm-systimer.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 422376680c8a..3fae9ebb58b8 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -554,6 +554,7 @@ static int __init dmtimer_clockevent_init(struct device_node *np)
dev->set_state_shutdown = dmtimer_clockevent_shutdown;
dev->set_state_periodic = dmtimer_set_periodic;
dev->set_state_oneshot = dmtimer_clockevent_shutdown;
+ dev->set_state_oneshot_stopped = dmtimer_clockevent_shutdown;
dev->tick_resume = dmtimer_clockevent_shutdown;
dev->cpumask = cpu_possible_mask;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 274/677] clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (272 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 273/677] clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 275/677] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
` (409 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Daniel Lezcano, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 2a65f7e2772613debd03fa2492e76a635aa04545 ]
In case of error, the function device_node_to_regmap() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210308123031.2285083-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clocksource/ingenic-ost.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/ingenic-ost.c b/drivers/clocksource/ingenic-ost.c
index 029efc2731b4..6af2470136bd 100644
--- a/drivers/clocksource/ingenic-ost.c
+++ b/drivers/clocksource/ingenic-ost.c
@@ -88,9 +88,9 @@ static int __init ingenic_ost_probe(struct platform_device *pdev)
return PTR_ERR(ost->regs);
map = device_node_to_regmap(dev->parent->of_node);
- if (!map) {
+ if (IS_ERR(map)) {
dev_err(dev, "regmap not found");
- return -EINVAL;
+ return PTR_ERR(map);
}
ost->clk = devm_clk_get(dev, "ost");
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 275/677] spi: Fix use-after-free with devm_spi_alloc_*
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (273 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 274/677] clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 276/677] spi: fsl: add missing iounmap() on error in of_fsl_spi_probe() Greg Kroah-Hartman
` (408 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, William A. Kennington III,
Mark Brown, Sasha Levin
From: William A. Kennington III <wak@google.com>
[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ]
We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98)
[<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24)
r4:b6700140
[<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40)
[<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4)
r5:b6700180 r4:b6700100
[<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60)
r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec)
r5:b117ad94 r4:b163dc10
[<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0)
r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8)
Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.
Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III <wak@google.com>
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi.c | 9 ++-------
include/linux/spi/spi.h | 3 +++
2 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 927c2a28011f..8da4fe475b84 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2496,6 +2496,7 @@ struct spi_controller *__devm_spi_alloc_controller(struct device *dev,
ctlr = __spi_alloc_controller(dev, size, slave);
if (ctlr) {
+ ctlr->devm_allocated = true;
*ptr = ctlr;
devres_add(dev, ptr);
} else {
@@ -2842,11 +2843,6 @@ int devm_spi_register_controller(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_spi_register_controller);
-static int devm_spi_match_controller(struct device *dev, void *res, void *ctlr)
-{
- return *(struct spi_controller **)res == ctlr;
-}
-
static int __unregister(struct device *dev, void *null)
{
spi_unregister_device(to_spi_device(dev));
@@ -2893,8 +2889,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
/* Release the last reference on the controller if its driver
* has not yet been converted to devm_spi_alloc_master/slave().
*/
- if (!devres_find(ctlr->dev.parent, devm_spi_release_controller,
- devm_spi_match_controller, ctlr))
+ if (!ctlr->devm_allocated)
put_device(&ctlr->dev);
/* free bus id */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 592897fa4f03..643139b1eafe 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -510,6 +510,9 @@ struct spi_controller {
#define SPI_MASTER_GPIO_SS BIT(5) /* GPIO CS must select slave */
+ /* flag indicating this is a non-devres managed controller */
+ bool devm_allocated;
+
/* flag indicating this is an SPI slave controller */
bool slave;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 276/677] spi: fsl: add missing iounmap() on error in of_fsl_spi_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (274 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 275/677] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 277/677] soc: qcom: mdt_loader: Validate that p_filesz < p_memsz Greg Kroah-Hartman
` (407 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
Mark Brown, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 5fed9fe5b41aea58e5b32be506dc50c9ab9a0e4d ]
Add the missing iounmap() before return from of_fsl_spi_probe()
in the error handling case.
Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210401140350.1677925-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-fsl-spi.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index e4a8d203f940..d0e5aa18b7ba 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -707,6 +707,11 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
struct resource mem;
int irq, type;
int ret;
+ bool spisel_boot = false;
+#if IS_ENABLED(CONFIG_FSL_SOC)
+ struct mpc8xxx_spi_probe_info *pinfo = NULL;
+#endif
+
ret = of_mpc8xxx_spi_probe(ofdev);
if (ret)
@@ -715,9 +720,8 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
type = fsl_spi_get_type(&ofdev->dev);
if (type == TYPE_FSL) {
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
- bool spisel_boot = false;
#if IS_ENABLED(CONFIG_FSL_SOC)
- struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
+ pinfo = to_of_pinfo(pdata);
spisel_boot = of_property_read_bool(np, "fsl,spisel_boot");
if (spisel_boot) {
@@ -746,15 +750,24 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
ret = of_address_to_resource(np, 0, &mem);
if (ret)
- return ret;
+ goto unmap_out;
irq = platform_get_irq(ofdev, 0);
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto unmap_out;
+ }
master = fsl_spi_probe(dev, &mem, irq);
return PTR_ERR_OR_ZERO(master);
+
+unmap_out:
+#if IS_ENABLED(CONFIG_FSL_SOC)
+ if (spisel_boot)
+ iounmap(pinfo->immr_spi_cs);
+#endif
+ return ret;
}
static int of_fsl_spi_remove(struct platform_device *ofdev)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 277/677] soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (275 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 276/677] spi: fsl: add missing iounmap() on error in of_fsl_spi_probe() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 278/677] soc: qcom: mdt_loader: Detect truncated read of segments Greg Kroah-Hartman
` (406 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sibi Sankar, Bjorn Andersson, Sasha Levin
From: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Upstream commit 84168d1b54e76a1bcb5192991adde5176abe02e3 ]
The code validates that segments of p_memsz bytes of a segment will fit
in the provided memory region, but does not validate that p_filesz bytes
will, which means that an incorrectly crafted ELF header might write
beyond the provided memory region.
Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107233119.717173-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/mdt_loader.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 24cd193dec55..2ddaee5ef9cc 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -230,6 +230,14 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
break;
}
+ if (phdr->p_filesz > phdr->p_memsz) {
+ dev_err(dev,
+ "refusing to load segment %d with p_filesz > p_memsz\n",
+ i);
+ ret = -EINVAL;
+ break;
+ }
+
ptr = mem_region + offset;
if (phdr->p_filesz && phdr->p_offset < fw->size) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 278/677] soc: qcom: mdt_loader: Detect truncated read of segments
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (276 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 277/677] soc: qcom: mdt_loader: Validate that p_filesz < p_memsz Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 279/677] PM: runtime: Replace inline function pm_runtime_callbacks_present() Greg Kroah-Hartman
` (405 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sibi Sankar, Bjorn Andersson, Sasha Levin
From: Bjorn Andersson <bjorn.andersson@linaro.org>
[ Upstream commit 0648c55e3a21ccd816e99b6600d6199fbf39d23a ]
Given that no validation of how much data the firmware loader read in
for a given segment truncated segment files would best case result in a
hash verification failure, without any indication of what went wrong.
Improve this by validating that the firmware loader did return the
amount of data requested.
Fixes: 445c2410a449 ("soc: qcom: mdt_loader: Use request_firmware_into_buf()")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107232526.716989-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/mdt_loader.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 2ddaee5ef9cc..eba7f76f9d61 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -261,6 +261,15 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
break;
}
+ if (seg_fw->size != phdr->p_filesz) {
+ dev_err(dev,
+ "failed to load segment %d from truncated file %s\n",
+ i, fw_name);
+ release_firmware(seg_fw);
+ ret = -EINVAL;
+ break;
+ }
+
release_firmware(seg_fw);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 279/677] PM: runtime: Replace inline function pm_runtime_callbacks_present()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (277 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 278/677] soc: qcom: mdt_loader: Detect truncated read of segments Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 280/677] cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration Greg Kroah-Hartman
` (404 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, YueHaibing, Rafael J. Wysocki, Sasha Levin
From: YueHaibing <yuehaibing@huawei.com>
[ Upstream commit 953c1fd96b1a70bcbbfb10973c2126eba8d891c7 ]
Commit 9a7875461fd0 ("PM: runtime: Replace pm_runtime_callbacks_present()")
forgot to change the inline version.
Fixes: 9a7875461fd0 ("PM: runtime: Replace pm_runtime_callbacks_present()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/pm_runtime.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index b492ae00cc90..6c08a085367b 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -265,7 +265,7 @@ static inline void pm_runtime_no_callbacks(struct device *dev) {}
static inline void pm_runtime_irq_safe(struct device *dev) {}
static inline bool pm_runtime_is_irq_safe(struct device *dev) { return false; }
-static inline bool pm_runtime_callbacks_present(struct device *dev) { return false; }
+static inline bool pm_runtime_has_no_callbacks(struct device *dev) { return false; }
static inline void pm_runtime_mark_last_busy(struct device *dev) {}
static inline void __pm_runtime_use_autosuspend(struct device *dev,
bool use) {}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 280/677] cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (278 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 279/677] PM: runtime: Replace inline function pm_runtime_callbacks_present() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 281/677] ACPI: CPPC: Replace cppc_attr with kobj_attribute Greg Kroah-Hartman
` (403 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, He Ying, Daniel Lezcano,
Sasha Levin
From: He Ying <heying24@huawei.com>
[ Upstream commit 498ba2a8a2756694b6f3888857426dbc8a5e6b6c ]
When CONFIG_ARM_QCOM_SPM_CPUIDLE is y and CONFIG_MMU is not set,
compiling errors are encountered as follows:
drivers/cpuidle/cpuidle-qcom-spm.o: In function `spm_dev_probe':
cpuidle-qcom-spm.c:(.text+0x140): undefined reference to `cpu_resume_arm'
cpuidle-qcom-spm.c:(.text+0x148): undefined reference to `cpu_resume_arm'
Note that cpu_resume_arm is defined when MMU is set. So, add dependency
on MMU in ARM_QCOM_SPM_CPUIDLE configuration.
Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406123328.92904-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpuidle/Kconfig.arm | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 0844fadc4be8..334f83e56120 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -107,7 +107,7 @@ config ARM_TEGRA_CPUIDLE
config ARM_QCOM_SPM_CPUIDLE
bool "CPU Idle Driver for Qualcomm Subsystem Power Manager (SPM)"
- depends on (ARCH_QCOM || COMPILE_TEST) && !ARM64
+ depends on (ARCH_QCOM || COMPILE_TEST) && !ARM64 && MMU
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
select DT_IDLE_STATES
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 281/677] ACPI: CPPC: Replace cppc_attr with kobj_attribute
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (279 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 280/677] cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 282/677] crypto: allwinner - add missing CRYPTO_ prefix Greg Kroah-Hartman
` (402 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, Rafael J. Wysocki,
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 2bc6262c6117dd18106d5aa50d53e945b5d99c51 ]
All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);
because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type
ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);
because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400
$ dmesg | grep "CFI failure"
[ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8):
As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.
Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.
[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/
Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/cppc_acpi.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 69057fcd2c04..a5e6fd0bafa1 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -119,23 +119,15 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
*/
#define NUM_RETRIES 500ULL
-struct cppc_attr {
- struct attribute attr;
- ssize_t (*show)(struct kobject *kobj,
- struct attribute *attr, char *buf);
- ssize_t (*store)(struct kobject *kobj,
- struct attribute *attr, const char *c, ssize_t count);
-};
-
#define define_one_cppc_ro(_name) \
-static struct cppc_attr _name = \
+static struct kobj_attribute _name = \
__ATTR(_name, 0444, show_##_name, NULL)
#define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
#define show_cppc_data(access_fn, struct_name, member_name) \
static ssize_t show_##member_name(struct kobject *kobj, \
- struct attribute *attr, char *buf) \
+ struct kobj_attribute *attr, char *buf) \
{ \
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
struct struct_name st_name = {0}; \
@@ -161,7 +153,7 @@ show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
static ssize_t show_feedback_ctrs(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
struct cppc_perf_fb_ctrs fb_ctrs = {0};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 282/677] crypto: allwinner - add missing CRYPTO_ prefix
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (280 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 281/677] ACPI: CPPC: Replace cppc_attr with kobj_attribute Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 283/677] crypto: sun8i-ss - Fix memory leak of pad Greg Kroah-Hartman
` (401 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen-Yu Tsai, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Corentin Labbe <clabbe.montjoie@gmail.com>
[ Upstream commit ac1af1a788b2002eb9d6f5ca6054517ad27f1930 ]
Some CONFIG select miss CRYPTO_.
Reported-by: Chen-Yu Tsai <wens@csie.org>
Fixes: 56f6d5aee88d1 ("crypto: sun8i-ce - support hash algorithms")
Fixes: d9b45418a9177 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/allwinner/Kconfig | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/crypto/allwinner/Kconfig b/drivers/crypto/allwinner/Kconfig
index 856fb2045656..b8e75210a0e3 100644
--- a/drivers/crypto/allwinner/Kconfig
+++ b/drivers/crypto/allwinner/Kconfig
@@ -71,10 +71,10 @@ config CRYPTO_DEV_SUN8I_CE_DEBUG
config CRYPTO_DEV_SUN8I_CE_HASH
bool "Enable support for hash on sun8i-ce"
depends on CRYPTO_DEV_SUN8I_CE
- select MD5
- select SHA1
- select SHA256
- select SHA512
+ select CRYPTO_MD5
+ select CRYPTO_SHA1
+ select CRYPTO_SHA256
+ select CRYPTO_SHA512
help
Say y to enable support for hash algorithms.
@@ -132,8 +132,8 @@ config CRYPTO_DEV_SUN8I_SS_PRNG
config CRYPTO_DEV_SUN8I_SS_HASH
bool "Enable support for hash on sun8i-ss"
depends on CRYPTO_DEV_SUN8I_SS
- select MD5
- select SHA1
- select SHA256
+ select CRYPTO_MD5
+ select CRYPTO_SHA1
+ select CRYPTO_SHA256
help
Say y to enable support for hash algorithms.
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 283/677] crypto: sun8i-ss - Fix memory leak of pad
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (281 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 282/677] crypto: allwinner - add missing CRYPTO_ prefix Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 284/677] crypto: sa2ul - Fix memory leak of rxd Greg Kroah-Hartman
` (400 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Corentin Labbe,
Herbert Xu, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 50274b01ac1689b1a3f6bc4b5b3dbf361a55dd3a ]
It appears there are several failure return paths that don't seem
to be free'ing pad. Fix these.
Addresses-Coverity: ("Resource leak")
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
index 0b9aa24a5edd..64446b86c927 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
@@ -348,8 +348,10 @@ int sun8i_ss_hash_run(struct crypto_engine *engine, void *breq)
bf = (__le32 *)pad;
result = kzalloc(digestsize, GFP_KERNEL | GFP_DMA);
- if (!result)
+ if (!result) {
+ kfree(pad);
return -ENOMEM;
+ }
for (i = 0; i < MAX_SG; i++) {
rctx->t_dst[i].addr = 0;
@@ -435,10 +437,9 @@ int sun8i_ss_hash_run(struct crypto_engine *engine, void *breq)
dma_unmap_sg(ss->dev, areq->src, nr_sgs, DMA_TO_DEVICE);
dma_unmap_single(ss->dev, addr_res, digestsize, DMA_FROM_DEVICE);
- kfree(pad);
-
memcpy(areq->result, result, algt->alg.hash.halg.digestsize);
theend:
+ kfree(pad);
kfree(result);
crypto_finalize_hash_request(engine, breq, err);
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 284/677] crypto: sa2ul - Fix memory leak of rxd
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (282 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 283/677] crypto: sun8i-ss - Fix memory leak of pad Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 285/677] crypto: qat - Fix a double free in adf_create_ring Greg Kroah-Hartman
` (399 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Herbert Xu, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 854b7737199848a91f6adfa0a03cf6f0c46c86e8 ]
There are two error return paths that are not freeing rxd and causing
memory leaks. Fix these.
Addresses-Coverity: ("Resource leak")
Fixes: 00c9211f60db ("crypto: sa2ul - Fix DMA mapping API usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/sa2ul.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index d7b1628fb484..b0f0502a5bb0 100644
--- a/drivers/crypto/sa2ul.c
+++ b/drivers/crypto/sa2ul.c
@@ -1146,8 +1146,10 @@ static int sa_run(struct sa_req *req)
mapped_sg->sgt.sgl = src;
mapped_sg->sgt.orig_nents = src_nents;
ret = dma_map_sgtable(ddev, &mapped_sg->sgt, dir_src, 0);
- if (ret)
+ if (ret) {
+ kfree(rxd);
return ret;
+ }
mapped_sg->dir = dir_src;
mapped_sg->mapped = true;
@@ -1155,8 +1157,10 @@ static int sa_run(struct sa_req *req)
mapped_sg->sgt.sgl = req->src;
mapped_sg->sgt.orig_nents = sg_nents;
ret = dma_map_sgtable(ddev, &mapped_sg->sgt, dir_src, 0);
- if (ret)
+ if (ret) {
+ kfree(rxd);
return ret;
+ }
mapped_sg->dir = dir_src;
mapped_sg->mapped = true;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 285/677] crypto: qat - Fix a double free in adf_create_ring
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (283 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 284/677] crypto: sa2ul - Fix memory leak of rxd Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 286/677] cpufreq: armada-37xx: Fix setting TBG parent for load levels Greg Kroah-Hartman
` (398 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Herbert Xu, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit f7cae626cabb3350b23722b78fe34dd7a615ca04 ]
In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().
My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.
Fixes: a672a9dc872ec ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/qat/qat_common/adf_transport.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/qat/qat_common/adf_transport.c b/drivers/crypto/qat/qat_common/adf_transport.c
index 888c1e047295..8ba28409fb74 100644
--- a/drivers/crypto/qat/qat_common/adf_transport.c
+++ b/drivers/crypto/qat/qat_common/adf_transport.c
@@ -172,6 +172,7 @@ static int adf_init_ring(struct adf_etr_ring_data *ring)
dev_err(&GET_DEV(accel_dev), "Ring address not aligned\n");
dma_free_coherent(&GET_DEV(accel_dev), ring_size_bytes,
ring->base_addr, ring->dma_addr);
+ ring->base_addr = NULL;
return -EFAULT;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 286/677] cpufreq: armada-37xx: Fix setting TBG parent for load levels
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (284 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 285/677] crypto: qat - Fix a double free in adf_create_ring Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 287/677] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock Greg Kroah-Hartman
` (397 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Gregory CLEMENT,
Pali Rohár, Tomasz Maciej Nowak, Anders Trier Olesen,
Philip Soares, Viresh Kumar, Sasha Levin
From: Marek Behún <kabel@kernel.org>
[ Upstream commit 22592df194e31baf371906cc720da38fa0ab68f5 ]
With CPU frequency determining software [1] we have discovered that
after this driver does one CPU frequency change, the base frequency of
the CPU is set to the frequency of TBG-A-P clock, instead of the TBG
that is parent to the CPU.
This can be reproduced on EspressoBIN and Turris MOX:
cd /sys/devices/system/cpu/cpufreq/policy0
echo powersave >scaling_governor
echo performance >scaling_governor
Running the mhz tool before this driver is loaded reports 1000 MHz, and
after loading the driver and executing commands above the tool reports
800 MHz.
The change of TBG clock selector is supposed to happen in function
armada37xx_cpufreq_dvfs_setup. Before the function returns, it does
this:
parent = clk_get_parent(clk);
clk_set_parent(clk, parent);
The armada-37xx-periph clock driver has the .set_parent method
implemented correctly for this, so if the method was actually called,
this would work. But since the introduction of the common clock
framework in commit b2476490ef11 ("clk: introduce the common clock..."),
the clk_set_parent function checks whether the parent is actually
changing, and if the requested new parent is same as the old parent
(which is obviously the case for the code above), the .set_parent method
is not called at all.
This patch fixes this issue by filling the correct TBG clock selector
directly in the armada37xx_cpufreq_dvfs_setup during the filling of
other registers at the same address. But the determination of CPU TBG
index cannot be done via the common clock framework, therefore we need
to access the North Bridge Peripheral Clock registers directly in this
driver.
[1] https://github.com/wtarreau/mhz
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 35 ++++++++++++++++++---------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index b4af4094309b..b8dc6c849579 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -25,6 +25,10 @@
#include "cpufreq-dt.h"
+/* Clk register set */
+#define ARMADA_37XX_CLK_TBG_SEL 0
+#define ARMADA_37XX_CLK_TBG_SEL_CPU_OFF 22
+
/* Power management in North Bridge register set */
#define ARMADA_37XX_NB_L0L1 0x18
#define ARMADA_37XX_NB_L2L3 0x1C
@@ -120,10 +124,15 @@ static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
* will be configured then the DVFS will be enabled.
*/
static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
- struct clk *clk, u8 *divider)
+ struct regmap *clk_base, u8 *divider)
{
+ u32 cpu_tbg_sel;
int load_lvl;
- struct clk *parent;
+
+ /* Determine to which TBG clock is CPU connected */
+ regmap_read(clk_base, ARMADA_37XX_CLK_TBG_SEL, &cpu_tbg_sel);
+ cpu_tbg_sel >>= ARMADA_37XX_CLK_TBG_SEL_CPU_OFF;
+ cpu_tbg_sel &= ARMADA_37XX_NB_TBG_SEL_MASK;
for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
unsigned int reg, mask, val, offset = 0;
@@ -142,6 +151,11 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
mask = (ARMADA_37XX_NB_CLK_SEL_MASK
<< ARMADA_37XX_NB_CLK_SEL_OFF);
+ /* Set TBG index, for all levels we use the same TBG */
+ val = cpu_tbg_sel << ARMADA_37XX_NB_TBG_SEL_OFF;
+ mask = (ARMADA_37XX_NB_TBG_SEL_MASK
+ << ARMADA_37XX_NB_TBG_SEL_OFF);
+
/*
* Set cpu divider based on the pre-computed array in
* order to have balanced step.
@@ -160,14 +174,6 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
regmap_update_bits(base, reg, mask, val);
}
-
- /*
- * Set cpu clock source, for all the level we keep the same
- * clock source that the one already configured. For this one
- * we need to use the clock framework
- */
- parent = clk_get_parent(clk);
- clk_set_parent(clk, parent);
}
/*
@@ -358,11 +364,16 @@ static int __init armada37xx_cpufreq_driver_init(void)
struct platform_device *pdev;
unsigned long freq;
unsigned int cur_frequency, base_frequency;
- struct regmap *nb_pm_base, *avs_base;
+ struct regmap *nb_clk_base, *nb_pm_base, *avs_base;
struct device *cpu_dev;
int load_lvl, ret;
struct clk *clk, *parent;
+ nb_clk_base =
+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-periph-clock-nb");
+ if (IS_ERR(nb_clk_base))
+ return -ENODEV;
+
nb_pm_base =
syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
@@ -439,7 +450,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
armada37xx_cpufreq_avs_configure(avs_base, dvfs);
armada37xx_cpufreq_avs_setup(avs_base, dvfs);
- armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, nb_clk_base, dvfs->divider);
clk_put(clk);
for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 287/677] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (285 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 286/677] cpufreq: armada-37xx: Fix setting TBG parent for load levels Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 288/677] cpufreq: armada-37xx: Fix the AVS value for load L1 Greg Kroah-Hartman
` (396 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Stephen Boyd,
Gregory CLEMENT, Pali Rohár, Tomasz Maciej Nowak,
Anders Trier Olesen, Philip Soares, Viresh Kumar, Sasha Levin
From: Marek Behún <kabel@kernel.org>
[ Upstream commit 4e435a9dd26c46ac018997cc0562d50b1a96f372 ]
Remove the .set_parent method in clk_pm_cpu_ops.
This method was supposed to be needed by the armada-37xx-cpufreq driver,
but was never actually called due to wrong assumptions in the cpufreq
driver. After this was fixed in the cpufreq driver, this method is not
needed anymore.
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/mvebu/armada-37xx-periph.c | 28 --------------------------
1 file changed, 28 deletions(-)
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index f5746f9ea929..6507bd2c5f31 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -440,33 +440,6 @@ static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
return val;
}
-static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
- struct regmap *base = pm_cpu->nb_pm_base;
- int load_level;
-
- /*
- * We set the clock parent only if the DVFS is available but
- * not enabled.
- */
- if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base))
- return -EINVAL;
-
- /* Set the parent clock for all the load level */
- for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
- unsigned int reg, mask, val,
- offset = ARMADA_37XX_NB_TBG_SEL_OFF;
-
- armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-
- val = index << offset;
- mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset;
- regmap_update_bits(base, reg, mask, val);
- }
- return 0;
-}
-
static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -592,7 +565,6 @@ static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops clk_pm_cpu_ops = {
.get_parent = clk_pm_cpu_get_parent,
- .set_parent = clk_pm_cpu_set_parent,
.round_rate = clk_pm_cpu_round_rate,
.set_rate = clk_pm_cpu_set_rate,
.recalc_rate = clk_pm_cpu_recalc_rate,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 288/677] cpufreq: armada-37xx: Fix the AVS value for load L1
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (286 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 287/677] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 289/677] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz Greg Kroah-Hartman
` (395 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Gregory CLEMENT,
Tomasz Maciej Nowak, Anders Trier Olesen, Philip Soares,
Viresh Kumar, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit d118ac2062b5b8331c8768ac81e016617e0996ee ]
The original CPU voltage value for load L1 is too low for Armada 37xx SoC
when base CPU frequency is 1000 or 1200 MHz. It leads to instabilities
where CPU gets stuck soon after dynamic voltage scaling from load L1 to L0.
Update the CPU voltage value for load L1 accordingly when base frequency is
1000 or 1200 MHz. The minimal L1 value for base CPU frequency 1000 MHz is
updated from the original 1.05V to 1.108V and for 1200 MHz is updated to
1.155V. This minimal L1 value is used only in the case when it is lower
than value for L0.
This change fixes CPU instability issues on 1 GHz and 1.2 GHz variants of
Espressobin and 1 GHz Turris Mox.
Marvell previously for 1 GHz variant of Espressobin provided a patch [1]
suitable only for their Marvell Linux kernel 4.4 fork which workarounded
this issue. Patch forced CPU voltage value to 1.108V in all loads. But
such change does not fix CPU instability issues on 1.2 GHz variants of
Armada 3720 SoC.
During testing we come to the conclusion that using 1.108V as minimal
value for L1 load makes 1 GHz variants of Espressobin and Turris Mox boards
stable. And similarly 1.155V for 1.2 GHz variant of Espressobin.
These two values 1.108V and 1.155V are documented in Armada 3700 Hardware
Specifications as typical initial CPU voltage values.
Discussion about this issue is also at the Armbian forum [2].
[1] - https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/dc33b62c90696afb6adc7dbcc4ebbd48bedec269
[2] - https://forum.armbian.com/topic/10429-how-to-make-espressobin-v7-stable/
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 1c3528232f4b ("cpufreq: armada-37xx: Add AVS support")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 37 +++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index b8dc6c849579..c7683d447b11 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -73,6 +73,8 @@
#define LOAD_LEVEL_NR 4
#define MIN_VOLT_MV 1000
+#define MIN_VOLT_MV_FOR_L1_1000MHZ 1108
+#define MIN_VOLT_MV_FOR_L1_1200MHZ 1155
/* AVS value for the corresponding voltage (in mV) */
static int avs_map[] = {
@@ -208,6 +210,8 @@ static u32 armada_37xx_avs_val_match(int target_vm)
* - L2 & L3 voltage should be about 150mv smaller than L0 voltage.
* This function calculates L1 & L2 & L3 AVS values dynamically based
* on L0 voltage and fill all AVS values to the AVS value table.
+ * When base CPU frequency is 1000 or 1200 MHz then there is additional
+ * minimal avs value for load L1.
*/
static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
struct armada_37xx_dvfs *dvfs)
@@ -239,6 +243,19 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++)
dvfs->avs[load_level] = avs_min;
+ /*
+ * Set the avs values for load L0 and L1 when base CPU frequency
+ * is 1000/1200 MHz to its typical initial values according to
+ * the Armada 3700 Hardware Specifications.
+ */
+ if (dvfs->cpu_freq_max >= 1000*1000*1000) {
+ if (dvfs->cpu_freq_max >= 1200*1000*1000)
+ avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ);
+ else
+ avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ);
+ dvfs->avs[0] = dvfs->avs[1] = avs_min;
+ }
+
return;
}
@@ -258,6 +275,26 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
target_vm = avs_map[l0_vdd_min] - 150;
target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm);
+
+ /*
+ * Fix the avs value for load L1 when base CPU frequency is 1000/1200 MHz,
+ * otherwise the CPU gets stuck when switching from load L1 to load L0.
+ * Also ensure that avs value for load L1 is not higher than for L0.
+ */
+ if (dvfs->cpu_freq_max >= 1000*1000*1000) {
+ u32 avs_min_l1;
+
+ if (dvfs->cpu_freq_max >= 1200*1000*1000)
+ avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ);
+ else
+ avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ);
+
+ if (avs_min_l1 > dvfs->avs[0])
+ avs_min_l1 = dvfs->avs[0];
+
+ if (dvfs->avs[1] < avs_min_l1)
+ dvfs->avs[1] = avs_min_l1;
+ }
}
static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 289/677] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (287 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 288/677] cpufreq: armada-37xx: Fix the AVS value for load L1 Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 290/677] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 Greg Kroah-Hartman
` (394 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Stephen Boyd,
Gregory CLEMENT, Tomasz Maciej Nowak, Anders Trier Olesen,
Philip Soares, Viresh Kumar, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 4decb9187589f61fe9fc2bc4d9b01160b0a610c5 ]
It was observed that the workaround introduced by commit 61c40f35f5cd
("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to
1.2GHz") when base CPU frequency is 1.2 GHz is also required when base
CPU frequency is 1 GHz. Otherwise switching CPU frequency directly from
L2 (250 MHz) to L0 (1 GHz) causes a crash.
When base CPU frequency is just 800 MHz no crashed were observed during
switch from L2 to L0.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/mvebu/armada-37xx-periph.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index 6507bd2c5f31..b15e177bea7e 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -487,8 +487,10 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
}
/*
- * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz
- * respectively) to L0 frequency (1.2 Ghz) requires a significant
+ * Workaround when base CPU frequnecy is 1000 or 1200 MHz
+ *
+ * Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz
+ * respectively) to L0 frequency (1/1.2 GHz) requires a significant
* amount of time to let VDD stabilize to the appropriate
* voltage. This amount of time is large enough that it cannot be
* covered by the hardware countdown register. Due to this, the CPU
@@ -498,15 +500,15 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
* To work around this problem, we prevent switching directly from the
* L2/L3 frequencies to the L0 frequency, and instead switch to the L1
* frequency in-between. The sequence therefore becomes:
- * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ)
+ * 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz)
* 2. Sleep 20ms for stabling VDD voltage
- * 3. Then switch from L1(600MHZ) to L0(1200Mhz).
+ * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz).
*/
static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base)
{
unsigned int cur_level;
- if (rate != 1200 * 1000 * 1000)
+ if (rate < 1000 * 1000 * 1000)
return;
regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 290/677] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (288 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 289/677] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 291/677] cpufreq: armada-37xx: Fix driver cleanup when registration failed Greg Kroah-Hartman
` (393 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Pali Rohár,
Stephen Boyd, Gregory CLEMENT, Tomasz Maciej Nowak,
Anders Trier Olesen, Philip Soares, Viresh Kumar, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit e93033aff684641f71a436ca7a9d2a742126baaf ]
When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1)
quickly followed by a call with 1 GHz (L0), the CPU does not necessarily
stay in L1 for at least 20ms as is required by Marvell errata.
This situation happens frequently with the ondemand cpufreq governor and
can be also reproduced with userspace governor. In most cases it causes CPU
to crash.
This change fixes the above issue and ensures that the CPU always stays in
L1 for at least 20ms when switching from any state to L0.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/mvebu/armada-37xx-periph.c | 45 ++++++++++++++++++++++----
1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index b15e177bea7e..32ac6b6b7530 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -84,6 +84,7 @@ struct clk_pm_cpu {
void __iomem *reg_div;
u8 shift_div;
struct regmap *nb_pm_base;
+ unsigned long l1_expiration;
};
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
@@ -504,22 +505,52 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
* 2. Sleep 20ms for stabling VDD voltage
* 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz).
*/
-static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base)
+static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu,
+ unsigned int new_level, unsigned long rate,
+ struct regmap *base)
{
unsigned int cur_level;
- if (rate < 1000 * 1000 * 1000)
- return;
-
regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
- if (cur_level <= ARMADA_37XX_DVFS_LOAD_1)
+
+ if (cur_level == new_level)
+ return;
+
+ /*
+ * System wants to go to L1 on its own. If we are going from L2/L3,
+ * remember when 20ms will expire. If from L0, set the value so that
+ * next switch to L0 won't have to wait.
+ */
+ if (new_level == ARMADA_37XX_DVFS_LOAD_1) {
+ if (cur_level == ARMADA_37XX_DVFS_LOAD_0)
+ pm_cpu->l1_expiration = jiffies;
+ else
+ pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20);
return;
+ }
+
+ /*
+ * If we are setting to L2/L3, just invalidate L1 expiration time,
+ * sleeping is not needed.
+ */
+ if (rate < 1000*1000*1000)
+ goto invalidate_l1_exp;
+
+ /*
+ * We are going to L0 with rate >= 1GHz. Check whether we have been at
+ * L1 for long enough time. If not, go to L1 for 20ms.
+ */
+ if (pm_cpu->l1_expiration && jiffies >= pm_cpu->l1_expiration)
+ goto invalidate_l1_exp;
regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD,
ARMADA_37XX_NB_CPU_LOAD_MASK,
ARMADA_37XX_DVFS_LOAD_1);
msleep(20);
+
+invalidate_l1_exp:
+ pm_cpu->l1_expiration = 0;
}
static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -553,7 +584,9 @@ static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
reg = ARMADA_37XX_NB_CPU_LOAD;
mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
- clk_pm_cpu_set_rate_wa(rate, base);
+ /* Apply workaround when base CPU frequency is 1000 or 1200 MHz */
+ if (parent_rate >= 1000*1000*1000)
+ clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base);
regmap_update_bits(base, reg, mask, load_level);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 291/677] cpufreq: armada-37xx: Fix driver cleanup when registration failed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (289 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 290/677] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 292/677] cpufreq: armada-37xx: Fix determining base CPU frequency Greg Kroah-Hartman
` (392 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Gregory CLEMENT,
Tomasz Maciej Nowak, Anders Trier Olesen, Philip Soares,
Viresh Kumar, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 92963903a8e11b9576eb7249f8e81eefa93b6f96 ]
Commit 8db82563451f ("cpufreq: armada-37xx: fix frequency calculation for
opp") changed calculation of frequency passed to the dev_pm_opp_add()
function call. But the code for dev_pm_opp_remove() function call was not
updated, so the driver cleanup phase does not work when registration fails.
This fixes the issue by using the same frequency in both calls.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 8db82563451f ("cpufreq: armada-37xx: fix frequency calculation for opp")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index c7683d447b11..1ab2113daef5 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -521,7 +521,7 @@ disable_dvfs:
remove_opp:
/* clean-up the already added opp before leaving */
while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
- freq = cur_frequency / dvfs->divider[load_lvl];
+ freq = base_frequency / dvfs->divider[load_lvl];
dev_pm_opp_remove(cpu_dev, freq);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 292/677] cpufreq: armada-37xx: Fix determining base CPU frequency
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (290 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 291/677] cpufreq: armada-37xx: Fix driver cleanup when registration failed Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 293/677] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible Greg Kroah-Hartman
` (391 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pali Rohár, Gregory CLEMENT,
Tomasz Maciej Nowak, Anders Trier Olesen, Philip Soares,
Viresh Kumar, Sasha Levin
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 8bad3bf23cbc40abe1d24cec08a114df6facf858 ]
When current CPU load is not L0 then loading armada-37xx-cpufreq.ko driver
fails with following error:
# modprobe armada-37xx-cpufreq
[ 502.702097] Unsupported CPU frequency 250 MHz
This issue was partially fixed by commit 8db82563451f ("cpufreq:
armada-37xx: fix frequency calculation for opp"), but only for calculating
CPU frequency for opp.
Fix this also for determination of base CPU frequency.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 1ab2113daef5..e4782f562e7a 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -469,7 +469,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
return -EINVAL;
}
- dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
+ dvfs = armada_37xx_cpu_freq_info_get(base_frequency);
if (!dvfs) {
clk_put(clk);
return -EINVAL;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 293/677] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (291 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 292/677] cpufreq: armada-37xx: Fix determining base CPU frequency Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 294/677] spi: spi-zynqmp-gqspi: add mutex locking for exec_op Greg Kroah-Hartman
` (390 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Amit Kumar Mahapatra,
Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit a16bff68b75fd082d36aa0b14b540bd7a3ebebbd ]
When Ctrl+C occurs during the process of zynqmp_qspi_exec_op, the function
wait_for_completion_interruptible_timeout will return a non-zero value
-ERESTARTSYS immediately. This will disrupt the SPI memory operation
because the data transmitting may begin before the command or address
transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.
This patch fixes the error as below:
root@xilinx-zynqmp:~# flash_erase /dev/mtd3 0 0
Erasing 4 Kibyte @ 3d000 -- 4 % complete
(Press Ctrl+C)
[ 169.581911] zynqmp-qspi ff0f0000.spi: Chip select timed out
[ 170.585907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[ 171.589910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[ 172.593910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[ 173.597907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[ 173.603480] spi-nor spi0.0: Erase operation failed.
[ 173.608368] spi-nor spi0.0: Attempted to modify a protected sector.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210408040223.23134-2-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index c8fa6ee18ae7..d49ab6575553 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -973,7 +973,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
GQSPI_IER_GENFIFOEMPTY_MASK |
GQSPI_IER_TXNOT_FULL_MASK);
- if (!wait_for_completion_interruptible_timeout
+ if (!wait_for_completion_timeout
(&xqspi->data_completion, msecs_to_jiffies(1000))) {
err = -ETIMEDOUT;
kfree(tmpbuf);
@@ -1001,7 +1001,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
GQSPI_IER_TXEMPTY_MASK |
GQSPI_IER_GENFIFOEMPTY_MASK |
GQSPI_IER_TXNOT_FULL_MASK);
- if (!wait_for_completion_interruptible_timeout
+ if (!wait_for_completion_timeout
(&xqspi->data_completion, msecs_to_jiffies(1000))) {
err = -ETIMEDOUT;
goto return_err;
@@ -1076,7 +1076,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
GQSPI_IER_RXEMPTY_MASK);
}
}
- if (!wait_for_completion_interruptible_timeout
+ if (!wait_for_completion_timeout
(&xqspi->data_completion, msecs_to_jiffies(1000)))
err = -ETIMEDOUT;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 294/677] spi: spi-zynqmp-gqspi: add mutex locking for exec_op
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (292 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 293/677] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 295/677] spi: spi-zynqmp-gqspi: transmit dummy circles by using the controllers internal functionality Greg Kroah-Hartman
` (389 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Amit Kumar Mahapatra,
Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit a0f65be6e880a14d3445b75e7dc03d7d015fc922 ]
The spi-mem framework has no locking to prevent ctlr->mem_ops->exec_op
from concurrency. So add the locking to zynqmp_qspi_exec_op.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210408040223.23134-3-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index d49ab6575553..3b39461d58b3 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -173,6 +173,7 @@ struct zynqmp_qspi {
u32 genfifoentry;
enum mode_type mode;
struct completion data_completion;
+ struct mutex op_lock;
};
/**
@@ -951,6 +952,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
op->dummy.buswidth, op->data.buswidth);
+ mutex_lock(&xqspi->op_lock);
zynqmp_qspi_config_op(xqspi, mem->spi);
zynqmp_qspi_chipselect(mem->spi, false);
genfifoentry |= xqspi->genfifocs;
@@ -1084,6 +1086,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
return_err:
zynqmp_qspi_chipselect(mem->spi, true);
+ mutex_unlock(&xqspi->op_lock);
return err;
}
@@ -1156,6 +1159,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_pclk;
}
+ mutex_init(&xqspi->op_lock);
+
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 295/677] spi: spi-zynqmp-gqspi: transmit dummy circles by using the controllers internal functionality
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (293 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 294/677] spi: spi-zynqmp-gqspi: add mutex locking for exec_op Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 296/677] spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op Greg Kroah-Hartman
` (388 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Amit Kumar Mahapatra,
Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit 8ad07d79bd56a531990a1a3f3f1c0eb19d2de806 ]
There is a data corruption issue that occurs in the reading operation
(cmd:0x6c) when transmitting common data as dummy circles.
The gqspi controller has the functionality to send dummy clock circles.
When writing data with the fields [receive, transmit, data_xfer] = [0,0,1]
to the Generic FIFO, and configuring the correct SPI mode, the controller
will transmit dummy circles.
So let's switch to hardware dummy cycles transfer to fix this issue.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210408040223.23134-4-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 40 +++++++++++++++-------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 3b39461d58b3..cf73a069b759 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -521,7 +521,7 @@ static void zynqmp_qspi_filltxfifo(struct zynqmp_qspi *xqspi, int size)
{
u32 count = 0, intermediate;
- while ((xqspi->bytes_to_transfer > 0) && (count < size)) {
+ while ((xqspi->bytes_to_transfer > 0) && (count < size) && (xqspi->txbuf)) {
memcpy(&intermediate, xqspi->txbuf, 4);
zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
@@ -580,7 +580,7 @@ static void zynqmp_qspi_fillgenfifo(struct zynqmp_qspi *xqspi, u8 nbits,
genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
genfifoentry |= GQSPI_GENFIFO_TX;
transfer_len = xqspi->bytes_to_transfer;
- } else {
+ } else if (xqspi->rxbuf) {
genfifoentry &= ~GQSPI_GENFIFO_TX;
genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
genfifoentry |= GQSPI_GENFIFO_RX;
@@ -588,6 +588,11 @@ static void zynqmp_qspi_fillgenfifo(struct zynqmp_qspi *xqspi, u8 nbits,
transfer_len = xqspi->dma_rx_bytes;
else
transfer_len = xqspi->bytes_to_receive;
+ } else {
+ /* Sending dummy circles here */
+ genfifoentry &= ~(GQSPI_GENFIFO_TX | GQSPI_GENFIFO_RX);
+ genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+ transfer_len = xqspi->bytes_to_transfer;
}
genfifoentry |= zynqmp_qspi_selectspimode(xqspi, nbits);
xqspi->genfifoentry = genfifoentry;
@@ -1011,32 +1016,23 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
}
if (op->dummy.nbytes) {
- tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL | GFP_DMA);
- if (!tmpbuf)
- return -ENOMEM;
- memset(tmpbuf, 0xff, op->dummy.nbytes);
- reinit_completion(&xqspi->data_completion);
- xqspi->txbuf = tmpbuf;
+ xqspi->txbuf = NULL;
xqspi->rxbuf = NULL;
- xqspi->bytes_to_transfer = op->dummy.nbytes;
+ /*
+ * xqspi->bytes_to_transfer here represents the dummy circles
+ * which need to be sent.
+ */
+ xqspi->bytes_to_transfer = op->dummy.nbytes * 8 / op->dummy.buswidth;
xqspi->bytes_to_receive = 0;
- zynqmp_qspi_write_op(xqspi, op->dummy.buswidth,
+ /*
+ * Using op->data.buswidth instead of op->dummy.buswidth here because
+ * we need to use it to configure the correct SPI mode.
+ */
+ zynqmp_qspi_write_op(xqspi, op->data.buswidth,
genfifoentry);
zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
GQSPI_CFG_START_GEN_FIFO_MASK);
- zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
- GQSPI_IER_TXEMPTY_MASK |
- GQSPI_IER_GENFIFOEMPTY_MASK |
- GQSPI_IER_TXNOT_FULL_MASK);
- if (!wait_for_completion_interruptible_timeout
- (&xqspi->data_completion, msecs_to_jiffies(1000))) {
- err = -ETIMEDOUT;
- kfree(tmpbuf);
- goto return_err;
- }
-
- kfree(tmpbuf);
}
if (op->data.nbytes) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 296/677] spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (294 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 295/677] spi: spi-zynqmp-gqspi: transmit dummy circles by using the controllers internal functionality Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 297/677] spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware() Greg Kroah-Hartman
` (387 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Amit Kumar Mahapatra,
Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit 41d310930084502433fcb3c4baf219e7424b7734 ]
When starting a read operation, we should call zynqmp_qspi_setuprxdma
first to set xqspi->mode according to xqspi->bytes_to_receive and
to calculate correct xqspi->dma_rx_bytes. Then in the function
zynqmp_qspi_fillgenfifo, generate the appropriate command with
operating mode and bytes to transfer, and fill the GENFIFO with
the command to perform the read operation.
Calling zynqmp_qspi_fillgenfifo before zynqmp_qspi_setuprxdma will
result in incorrect transfer length and operating mode. So change
the calling order to fix this issue.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210408040223.23134-5-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index cf73a069b759..036d8ae41c06 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -827,8 +827,8 @@ static void zynqmp_qspi_write_op(struct zynqmp_qspi *xqspi, u8 tx_nbits,
static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
u32 genfifoentry)
{
- zynqmp_qspi_fillgenfifo(xqspi, rx_nbits, genfifoentry);
zynqmp_qspi_setuprxdma(xqspi);
+ zynqmp_qspi_fillgenfifo(xqspi, rx_nbits, genfifoentry);
}
/**
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 297/677] spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (295 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 296/677] spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 298/677] usb: gadget: r8a66597: Add missing null check on return from platform_get_resource Greg Kroah-Hartman
` (386 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Li, Mark Brown, Sasha Levin
From: Wang Li <wangli74@huawei.com>
[ Upstream commit a03675497970a93fcf25d81d9d92a59c2d7377a7 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Li <wangli74@huawei.com>
Link: https://lore.kernel.org/r/20210409095430.29868-1-wangli74@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-fsl-lpspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index a2886ee44e4c..5d98611dd999 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -200,7 +200,7 @@ static int lpspi_prepare_xfer_hardware(struct spi_controller *controller)
spi_controller_get_devdata(controller);
int ret;
- ret = pm_runtime_get_sync(fsl_lpspi->dev);
+ ret = pm_runtime_resume_and_get(fsl_lpspi->dev);
if (ret < 0) {
dev_err(fsl_lpspi->dev, "failed to enable clock\n");
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 298/677] usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (296 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 297/677] spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 299/677] USB: cdc-acm: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
` (385 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Colin Ian King, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 9c2076090c2815fe7c49676df68dde7e60a9b9fc ]
The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.
Fixes: c41442474a26 ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/20210406184510.433497-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/udc/r8a66597-udc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 896c1a016d55..65cae4883454 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1849,6 +1849,8 @@ static int r8a66597_probe(struct platform_device *pdev)
return PTR_ERR(reg);
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!ires)
+ return -EINVAL;
irq = ires->start;
irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 299/677] USB: cdc-acm: fix unprivileged TIOCCSERIAL
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (297 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 298/677] usb: gadget: r8a66597: Add missing null check on return from platform_get_resource Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 300/677] USB: cdc-acm: fix TIOCGSERIAL implementation Greg Kroah-Hartman
` (384 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/class/cdc-acm.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 473b64ebc45f..b57cbdf4ff9f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -955,8 +955,6 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
if ((close_delay != acm->port.close_delay) ||
(closing_wait != acm->port.closing_wait))
retval = -EPERM;
- else
- retval = -EOPNOTSUPP;
} else {
acm->port.close_delay = close_delay;
acm->port.closing_wait = closing_wait;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 300/677] USB: cdc-acm: fix TIOCGSERIAL implementation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (298 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 299/677] USB: cdc-acm: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 301/677] tty: actually undefine superseded ASYNC flags Greg Kroah-Hartman
` (383 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 496960274153bdeb9d1f904ff1ea875cef8232c1 ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when it is
not used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected, but might as well be left unset when it is not
known (which is the case for CDC).
Fix the cdc-acm TIOCGSERIAL implementation by dropping its custom
interpretation of the unused xmit_fifo_size and baud_base fields, which
overflowed the former with the URB buffer size and set the latter to the
current line speed. Also return the port line number, which is the only
other value used besides the close parameters.
Note that the current line speed can still be retrieved through the
standard termios interfaces.
Fixes: 18c75720e667 ("USB: allow users to run setserial with cdc-acm")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/class/cdc-acm.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b57cbdf4ff9f..c103961c3fae 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -929,8 +929,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
{
struct acm *acm = tty->driver_data;
- ss->xmit_fifo_size = acm->writesize;
- ss->baud_base = le32_to_cpu(acm->line.dwDTERate);
+ ss->line = acm->minor;
ss->close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
ss->closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 301/677] tty: actually undefine superseded ASYNC flags
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (299 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 300/677] USB: cdc-acm: fix TIOCGSERIAL implementation Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 302/677] tty: fix return value for unsupported ioctls Greg Kroah-Hartman
` (382 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ]
Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.
Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.
Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/uapi/linux/tty_flags.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
index 900a32e63424..6a3ac496a56c 100644
--- a/include/uapi/linux/tty_flags.h
+++ b/include/uapi/linux/tty_flags.h
@@ -39,7 +39,7 @@
* WARNING: These flags are no longer used and have been superceded by the
* TTY_PORT_ flags in the iflags field (and not userspace-visible)
*/
-#ifndef _KERNEL_
+#ifndef __KERNEL__
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
@@ -81,7 +81,7 @@
#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-#ifndef _KERNEL_
+#ifndef __KERNEL__
/* These flags are no longer used (and were always masked from userspace) */
#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 302/677] tty: fix return value for unsupported ioctls
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (300 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 301/677] tty: actually undefine superseded ASYNC flags Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 303/677] tty: fix return value for unsupported termiox ioctls Greg Kroah-Hartman
` (381 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]
Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.
Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.
Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.
Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/tty_io.c | 10 +++++-----
include/linux/tty_driver.h | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 391bada4cedb..adbcbfa11b29 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2530,14 +2530,14 @@ out:
* @p: pointer to result
*
* Obtain the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
static int tty_tiocmget(struct tty_struct *tty, int __user *p)
{
- int retval = -EINVAL;
+ int retval = -ENOTTY;
if (tty->ops->tiocmget) {
retval = tty->ops->tiocmget(tty);
@@ -2555,7 +2555,7 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p)
* @p: pointer to desired bits
*
* Set the modem status bits from the tty driver if the feature
- * is supported. Return -EINVAL if it is not available.
+ * is supported. Return -ENOTTY if it is not available.
*
* Locking: none (up to the driver)
*/
@@ -2567,7 +2567,7 @@ static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
unsigned int set, clear, val;
if (tty->ops->tiocmset == NULL)
- return -EINVAL;
+ return -ENOTTY;
retval = get_user(val, p);
if (retval)
@@ -2607,7 +2607,7 @@ int tty_get_icount(struct tty_struct *tty,
if (tty->ops->get_icount)
return tty->ops->get_icount(tty, icount);
else
- return -EINVAL;
+ return -ENOTTY;
}
EXPORT_SYMBOL_GPL(tty_get_icount);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 61c3372d3f32..2f719b471d52 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -228,7 +228,7 @@
*
* Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
* structure to complete. This method is optional and will only be called
- * if provided (otherwise EINVAL will be returned).
+ * if provided (otherwise ENOTTY will be returned).
*/
#include <linux/export.h>
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 303/677] tty: fix return value for unsupported termiox ioctls
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (301 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 302/677] tty: fix return value for unsupported ioctls Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 304/677] serial: core: return early on unsupported ioctls Greg Kroah-Hartman
` (380 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 8871de06ff78e9333d86c87d7071452b690e7c9b ]
Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.
Support for termiox was added by commit 1d65b4a088de ("tty: Add
termiox") in 2008 but no driver support ever followed and it was
recently ripped out by commit e0efb3168d34 ("tty: Remove dead termiox
code").
Fix the return value for the unsupported termiox ioctls, which have
always returned -EINVAL, by explicitly returning -ENOTTY rather than
removing them completely and falling back to the default unrecognised-
ioctl handling.
Fixes: 1d65b4a088de ("tty: Add termiox")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/tty_ioctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 4de1c6ddb8ff..803da2d111c8 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -774,8 +774,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
case TCSETX:
case TCSETXW:
case TCSETXF:
- return -EINVAL;
-#endif
+ return -ENOTTY;
+#endif
case TIOCGSOFTCAR:
copy_termios(real_tty, &kterm);
ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 304/677] serial: core: return early on unsupported ioctls
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (302 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 303/677] tty: fix return value for unsupported termiox ioctls Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 305/677] firmware: qcom-scm: Fix QCOM_SCM configuration Greg Kroah-Hartman
` (379 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, Sasha Levin
From: Johan Hovold <johan@kernel.org>
[ Upstream commit 79c5966cec7b148199386ef9933c31b999379065 ]
Drivers can return -ENOIOCTLCMD when an ioctl is not recognised to tell
the upper layers to continue looking for a handler.
This is not the case for the RS485 and ISO7816 ioctls whose handlers
should return -ENOTTY directly in case a serial driver does not
implement the corresponding methods.
Fixes: a5f276f10ff7 ("serial_core: Handle TIOC[GS]RS485 ioctls.")
Fixes: ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-9-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/serial_core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ba31e97d3d96..43f02ed055d5 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1305,7 +1305,7 @@ static int uart_set_rs485_config(struct uart_port *port,
unsigned long flags;
if (!port->rs485_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
return -EFAULT;
@@ -1329,7 +1329,7 @@ static int uart_get_iso7816_config(struct uart_port *port,
struct serial_iso7816 aux;
if (!port->iso7816_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
spin_lock_irqsave(&port->lock, flags);
aux = port->iso7816;
@@ -1349,7 +1349,7 @@ static int uart_set_iso7816_config(struct uart_port *port,
unsigned long flags;
if (!port->iso7816_config)
- return -ENOIOCTLCMD;
+ return -ENOTTY;
if (copy_from_user(&iso7816, iso7816_user, sizeof(*iso7816_user)))
return -EFAULT;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 305/677] firmware: qcom-scm: Fix QCOM_SCM configuration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (303 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 304/677] serial: core: return early on unsupported ioctls Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 306/677] node: fix device cleanups in error handling code Greg Kroah-Hartman
` (378 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hulk Robot, He Ying, Sasha Levin
From: He Ying <heying24@huawei.com>
[ Upstream commit 2954a6f12f250890ec2433cec03ba92784d613e8 ]
When CONFIG_QCOM_SCM is y and CONFIG_HAVE_ARM_SMCCC
is not set, compiling errors are encountered as follows:
drivers/firmware/qcom_scm-smc.o: In function `__scm_smc_do_quirk':
qcom_scm-smc.c:(.text+0x36): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call':
qcom_scm-legacy.c:(.text+0xe2): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call_atomic':
qcom_scm-legacy.c:(.text+0x1f0): undefined reference to `__arm_smccc_smc'
Note that __arm_smccc_smc is defined when HAVE_ARM_SMCCC is y.
So add dependency on HAVE_ARM_SMCCC in QCOM_SCM configuration.
Fixes: 916f743da354 ("firmware: qcom: scm: Move the scm driver to drivers/firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210406094200.60952-1-heying24@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 3f14dffb9669..5dd19dbd67a3 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -237,6 +237,7 @@ config INTEL_STRATIX10_RSU
config QCOM_SCM
bool
depends on ARM || ARM64
+ depends on HAVE_ARM_SMCCC
select RESET_CONTROLLER
config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 306/677] node: fix device cleanups in error handling code
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (304 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 305/677] firmware: qcom-scm: Fix QCOM_SCM configuration Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 307/677] crypto: chelsio - Read rxchannel-id from firmware Greg Kroah-Hartman
` (377 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 4ce535ec0084f0d712317cb99d383cad3288e713 ]
We can't use kfree() to free device managed resources so the kfree(dev)
is against the rules.
It's easier to write this code if we open code the device_register() as
a device_initialize() and device_add(). That way if dev_set_name() set
name fails we can call put_device() and it will clean up correctly.
Fixes: acc02a109b04 ("node: Add memory-side caching attributes")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YHA0JUra+F64+NpB@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/node.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index f449dbb2c746..2c36f61d30bc 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -268,21 +268,20 @@ static void node_init_cache_dev(struct node *node)
if (!dev)
return;
+ device_initialize(dev);
dev->parent = &node->dev;
dev->release = node_cache_release;
if (dev_set_name(dev, "memory_side_cache"))
- goto free_dev;
+ goto put_device;
- if (device_register(dev))
- goto free_name;
+ if (device_add(dev))
+ goto put_device;
pm_runtime_no_callbacks(dev);
node->cache_dev = dev;
return;
-free_name:
- kfree_const(dev->kobj.name);
-free_dev:
- kfree(dev);
+put_device:
+ put_device(dev);
}
/**
@@ -319,25 +318,24 @@ void node_add_cache(unsigned int nid, struct node_cache_attrs *cache_attrs)
return;
dev = &info->dev;
+ device_initialize(dev);
dev->parent = node->cache_dev;
dev->release = node_cacheinfo_release;
dev->groups = cache_groups;
if (dev_set_name(dev, "index%d", cache_attrs->level))
- goto free_cache;
+ goto put_device;
info->cache_attrs = *cache_attrs;
- if (device_register(dev)) {
+ if (device_add(dev)) {
dev_warn(&node->dev, "failed to add cache level:%d\n",
cache_attrs->level);
- goto free_name;
+ goto put_device;
}
pm_runtime_no_callbacks(dev);
list_add_tail(&info->node, &node->cache_attrs);
return;
-free_name:
- kfree_const(dev->kobj.name);
-free_cache:
- kfree(info);
+put_device:
+ put_device(dev);
}
static void node_remove_caches(struct node *node)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 307/677] crypto: chelsio - Read rxchannel-id from firmware
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (305 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 306/677] node: fix device cleanups in error handling code Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 308/677] usbip: vudc: fix missing unlock on error in usbip_sockfd_store() Greg Kroah-Hartman
` (376 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ayush Sawal, Herbert Xu, Sasha Levin
From: Ayush Sawal <ayush.sawal@chelsio.com>
[ Upstream commit 16a9874fe468855e8ddd72883ca903f706d0a9d0 ]
The rxchannel id is updated by the driver using the
port no value, but this does not ensure that the value
is correct. So now rx channel value is obtained from
etoc channel map value.
Fixes: 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per...")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/chelsio/chcr_algo.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index f5a336634daa..405ff957b837 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -769,13 +769,14 @@ static inline void create_wreq(struct chcr_context *ctx,
struct uld_ctx *u_ctx = ULD_CTX(ctx);
unsigned int tx_channel_id, rx_channel_id;
unsigned int txqidx = 0, rxqidx = 0;
- unsigned int qid, fid;
+ unsigned int qid, fid, portno;
get_qidxs(req, &txqidx, &rxqidx);
qid = u_ctx->lldi.rxq_ids[rxqidx];
fid = u_ctx->lldi.rxq_ids[0];
+ portno = rxqidx / ctx->rxq_perchan;
tx_channel_id = txqidx / ctx->txq_perchan;
- rx_channel_id = rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[portno]);
chcr_req->wreq.op_to_cctx_size = FILL_WR_OP_CCTX_SIZE;
@@ -806,6 +807,7 @@ static struct sk_buff *create_cipher_wr(struct cipher_wr_param *wrparam)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(wrparam->req);
struct chcr_context *ctx = c_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
struct ablk_ctx *ablkctx = ABLK_CTX(ctx);
struct sk_buff *skb = NULL;
struct chcr_wr *chcr_req;
@@ -822,6 +824,7 @@ static struct sk_buff *create_cipher_wr(struct cipher_wr_param *wrparam)
struct adapter *adap = padap(ctx->dev);
unsigned int rx_channel_id = reqctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
nents = sg_nents_xlen(reqctx->dstsg, wrparam->bytes, CHCR_DST_SG_SIZE,
reqctx->dst_ofst);
dst_size = get_space_for_phys_dsgl(nents);
@@ -1580,6 +1583,7 @@ static struct sk_buff *create_hash_wr(struct ahash_request *req,
int error = 0;
unsigned int rx_channel_id = req_ctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
transhdr_len = HASH_TRANSHDR_SIZE(param->kctx_len);
req_ctx->hctx_wr.imm = (transhdr_len + param->bfr_len +
param->sg_len) <= SGE_MAX_WR_LEN;
@@ -2438,6 +2442,7 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req,
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
struct chcr_context *ctx = a_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
struct chcr_aead_ctx *aeadctx = AEAD_CTX(ctx);
struct chcr_authenc_ctx *actx = AUTHENC_CTX(aeadctx);
struct chcr_aead_reqctx *reqctx = aead_request_ctx(req);
@@ -2457,6 +2462,7 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req,
struct adapter *adap = padap(ctx->dev);
unsigned int rx_channel_id = reqctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
if (req->cryptlen == 0)
return NULL;
@@ -2710,9 +2716,11 @@ void chcr_add_aead_dst_ent(struct aead_request *req,
struct dsgl_walk dsgl_walk;
unsigned int authsize = crypto_aead_authsize(tfm);
struct chcr_context *ctx = a_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
u32 temp;
unsigned int rx_channel_id = reqctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
dsgl_walk_init(&dsgl_walk, phys_cpl);
dsgl_walk_add_page(&dsgl_walk, IV + reqctx->b0_len, reqctx->iv_dma);
temp = req->assoclen + req->cryptlen +
@@ -2752,9 +2760,11 @@ void chcr_add_cipher_dst_ent(struct skcipher_request *req,
struct chcr_skcipher_req_ctx *reqctx = skcipher_request_ctx(req);
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(wrparam->req);
struct chcr_context *ctx = c_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
struct dsgl_walk dsgl_walk;
unsigned int rx_channel_id = reqctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
dsgl_walk_init(&dsgl_walk, phys_cpl);
dsgl_walk_add_sg(&dsgl_walk, reqctx->dstsg, wrparam->bytes,
reqctx->dst_ofst);
@@ -2958,6 +2968,7 @@ static void fill_sec_cpl_for_aead(struct cpl_tx_sec_pdu *sec_cpl,
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
struct chcr_context *ctx = a_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
struct chcr_aead_ctx *aeadctx = AEAD_CTX(ctx);
struct chcr_aead_reqctx *reqctx = aead_request_ctx(req);
unsigned int cipher_mode = CHCR_SCMD_CIPHER_MODE_AES_CCM;
@@ -2967,6 +2978,8 @@ static void fill_sec_cpl_for_aead(struct cpl_tx_sec_pdu *sec_cpl,
unsigned int tag_offset = 0, auth_offset = 0;
unsigned int assoclen;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
+
if (get_aead_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_AEAD_RFC4309)
assoclen = req->assoclen - 8;
else
@@ -3127,6 +3140,7 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req,
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
struct chcr_context *ctx = a_ctx(tfm);
+ struct uld_ctx *u_ctx = ULD_CTX(ctx);
struct chcr_aead_ctx *aeadctx = AEAD_CTX(ctx);
struct chcr_aead_reqctx *reqctx = aead_request_ctx(req);
struct sk_buff *skb = NULL;
@@ -3143,6 +3157,7 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req,
struct adapter *adap = padap(ctx->dev);
unsigned int rx_channel_id = reqctx->rxqidx / ctx->rxq_perchan;
+ rx_channel_id = cxgb4_port_e2cchan(u_ctx->lldi.ports[rx_channel_id]);
if (get_aead_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_AEAD_RFC4106)
assoclen = req->assoclen - 8;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 308/677] usbip: vudc: fix missing unlock on error in usbip_sockfd_store()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (306 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 307/677] crypto: chelsio - Read rxchannel-id from firmware Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 309/677] m68k: Add missing mmap_read_lock() to sys_cacheflush() Greg Kroah-Hartman
` (375 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Shuah Khan, Ye Bin, Sasha Levin
From: Ye Bin <yebin10@huawei.com>
[ Upstream commit 1d08ed588c6a85a35a24c82eb4cf0807ec2b366a ]
Add the missing unlock before return from function usbip_sockfd_store()
in the error handling case.
Fixes: bd8b82042269 ("usbip: vudc synchronize sysfs code paths")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408112305.1022247-1-yebin10@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/usbip/vudc_sysfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c
index f7633ee655a1..d1cf6b51bf85 100644
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -156,12 +156,14 @@ static ssize_t usbip_sockfd_store(struct device *dev,
tcp_rx = kthread_create(&v_rx_loop, &udc->ud, "vudc_rx");
if (IS_ERR(tcp_rx)) {
sockfd_put(socket);
+ mutex_unlock(&udc->ud.sysfs_lock);
return -EINVAL;
}
tcp_tx = kthread_create(&v_tx_loop, &udc->ud, "vudc_tx");
if (IS_ERR(tcp_tx)) {
kthread_stop(tcp_rx);
sockfd_put(socket);
+ mutex_unlock(&udc->ud.sysfs_lock);
return -EINVAL;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 309/677] m68k: Add missing mmap_read_lock() to sys_cacheflush()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (307 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 308/677] usbip: vudc: fix missing unlock on error in usbip_sockfd_store() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 310/677] usb: cdnsp: Fixes issue with Configure Endpoint command Greg Kroah-Hartman
` (374 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liam R. Howlett,
Matthew Wilcox (Oracle),
Geert Uytterhoeven, Sasha Levin
From: Liam Howlett <liam.howlett@oracle.com>
[ Upstream commit f829b4b212a315b912cb23fd10aaf30534bb5ce9 ]
When the superuser flushes the entire cache, the mmap_read_lock() is not
taken, but mmap_read_unlock() is called. Add the missing
mmap_read_lock() call.
Fixes: cd2567b6850b1648 ("m68k: call find_vma with the mmap_sem held in sys_cacheflush()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20210407200032.764445-1-Liam.Howlett@Oracle.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/m68k/kernel/sys_m68k.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 1c235d8f53f3..f55bdcb8e4f1 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -388,6 +388,8 @@ sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
ret = -EPERM;
if (!capable(CAP_SYS_ADMIN))
goto out;
+
+ mmap_read_lock(current->mm);
} else {
struct vm_area_struct *vma;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 310/677] usb: cdnsp: Fixes issue with Configure Endpoint command
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (308 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 309/677] m68k: Add missing mmap_read_lock() to sys_cacheflush() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 311/677] spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op() Greg Kroah-Hartman
` (373 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pawel Laszczak, Peter Chen, Sasha Levin
From: Pawel Laszczak <pawell@cadence.com>
[ Upstream commit 10076de33b5ed5b1e049593a611d2fd9eba60565 ]
Patch adds flag EP_UNCONFIGURED to detect whether endpoint was
unconfigured. This flag is set in cdnsp_reset_device after Reset Device
command. Among others this command disables all non control endpoints.
Flag is used in cdnsp_gadget_ep_disable to protect controller against
invoking Configure Endpoint command on disabled endpoint. Lack of this
protection in some cases caused that Configure Endpoint command completed
with Context State Error code completion.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/cdns3/cdnsp-gadget.c | 17 ++++++++++++-----
drivers/usb/cdns3/cdnsp-gadget.h | 1 +
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
index d7d4bdd57f46..56707b6b0f57 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.c
+++ b/drivers/usb/cdns3/cdnsp-gadget.c
@@ -727,7 +727,7 @@ int cdnsp_reset_device(struct cdnsp_device *pdev)
* are in Disabled state.
*/
for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
- pdev->eps[i].ep_state |= EP_STOPPED;
+ pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
@@ -942,6 +942,7 @@ static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
pep = to_cdnsp_ep(ep);
pdev = pep->pdev;
+ pep->ep_state &= ~EP_UNCONFIGURED;
if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
"%s is already enabled\n", pep->name))
@@ -1023,9 +1024,13 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
goto finish;
}
- cdnsp_cmd_stop_ep(pdev, pep);
pep->ep_state |= EP_DIS_IN_RROGRESS;
- cdnsp_cmd_flush_ep(pdev, pep);
+
+ /* Endpoint was unconfigured by Reset Device command. */
+ if (!(pep->ep_state & EP_UNCONFIGURED)) {
+ cdnsp_cmd_stop_ep(pdev, pep);
+ cdnsp_cmd_flush_ep(pdev, pep);
+ }
/* Remove all queued USB requests. */
while (!list_empty(&pep->pending_list)) {
@@ -1043,10 +1048,12 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
cdnsp_endpoint_zero(pdev, pep);
- ret = cdnsp_update_eps_configuration(pdev, pep);
+ if (!(pep->ep_state & EP_UNCONFIGURED))
+ ret = cdnsp_update_eps_configuration(pdev, pep);
+
cdnsp_free_endpoint_rings(pdev, pep);
- pep->ep_state &= ~EP_ENABLED;
+ pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
pep->ep_state |= EP_STOPPED;
finish:
diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
index 6bbb26548c04..783ca8ffde00 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.h
+++ b/drivers/usb/cdns3/cdnsp-gadget.h
@@ -835,6 +835,7 @@ struct cdnsp_ep {
#define EP_WEDGE BIT(4)
#define EP0_HALTED_STATUS BIT(5)
#define EP_HAS_STREAMS BIT(6)
+#define EP_UNCONFIGURED BIT(7)
bool skip;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 311/677] spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (309 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 310/677] usb: cdnsp: Fixes issue with Configure Endpoint command Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 312/677] memory: renesas-rpc-if: fix possible NULL pointer dereference of resource Greg Kroah-Hartman
` (372 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun, Mark Brown,
Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 6043357263fbe2df0bf0736d971ad5dce7d19dc1 ]
Add the missing unlock before return from function zynqmp_qspi_exec_op()
in the error handling case.
Fixes: a0f65be6e880 ("spi: spi-zynqmp-gqspi: add mutex locking for exec_op")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210412160025.194171-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 036d8ae41c06..408e348382c5 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -965,8 +965,10 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
if (op->cmd.opcode) {
tmpbuf = kzalloc(op->cmd.nbytes, GFP_KERNEL | GFP_DMA);
- if (!tmpbuf)
+ if (!tmpbuf) {
+ mutex_unlock(&xqspi->op_lock);
return -ENOMEM;
+ }
tmpbuf[0] = op->cmd.opcode;
reinit_completion(&xqspi->data_completion);
xqspi->txbuf = tmpbuf;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 312/677] memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (310 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 311/677] spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op() Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 313/677] memory: samsung: exynos5422-dmc: handle clk_set_parent() failure Greg Kroah-Hartman
` (371 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ Upstream commit 59e27d7c94aa02da039b000d33c304c179395801 ]
The platform_get_resource_byname() can return NULL which would be
immediately dereferenced by resource_size(). Instead dereference it
after validating the resource.
Addresses-Coverity: Dereference null return value
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210407154357.70200-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memory/renesas-rpc-if.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 8d36e221def1..45eed659b0c6 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -192,10 +192,10 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
- rpc->size = resource_size(res);
rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rpc->dirmap))
rpc->dirmap = NULL;
+ rpc->size = resource_size(res);
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 313/677] memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (311 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 312/677] memory: renesas-rpc-if: fix possible NULL pointer dereference of resource Greg Kroah-Hartman
@ 2021-05-12 14:45 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 314/677] security: keys: trusted: fix TPM2 authorizations Greg Kroah-Hartman
` (370 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Lukasz Luba,
Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ Upstream commit 132c17c3ff878c7beaba51bdd275d5cc654c0e33 ]
clk_set_parent() can fail and ignoring such case could lead to invalid
clock setup for given frequency.
Addresses-Coverity: Unchecked return value
Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210407154535.70756-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/memory/samsung/exynos5422-dmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c
index 1dabb509dec3..dee503640e12 100644
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@@ -1298,7 +1298,9 @@ static int exynos5_dmc_init_clks(struct exynos5_dmc *dmc)
dmc->curr_volt = target_volt;
- clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll);
+ ret = clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll);
+ if (ret)
+ return ret;
clk_prepare_enable(dmc->fout_bpll);
clk_prepare_enable(dmc->mout_bpll);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 314/677] security: keys: trusted: fix TPM2 authorizations
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (312 preceding siblings ...)
2021-05-12 14:45 ` [PATCH 5.12 313/677] memory: samsung: exynos5422-dmc: handle clk_set_parent() failure Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 315/677] char: tpm: fix error return code in tpm_cr50_i2c_tis_recv() Greg Kroah-Hartman
` (369 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Bottomley, Jarkko Sakkinen,
Sasha Levin
From: James Bottomley <James.Bottomley@HansenPartnership.com>
[ Upstream commit de66514d934d70ce73c302ce0644b54970fc7196 ]
In TPM 1.2 an authorization was a 20 byte number. The spec actually
recommended you to hash variable length passwords and use the sha1
hash as the authorization. Because the spec doesn't require this
hashing, the current authorization for trusted keys is a 40 digit hex
number. For TPM 2.0 the spec allows the passing in of variable length
passwords and passphrases directly, so we should allow that in trusted
keys for ease of use. Update the 'blobauth' parameter to take this
into account, so we can now use plain text passwords for the keys.
so before
keyctl add trusted kmk "new 32 blobauth=f572d396fae9206628714fb2ce00f72e94f2258fkeyhandle=81000001" @u
after we will accept both the old hex sha1 form as well as a new
directly supplied password:
keyctl add trusted kmk "new 32 blobauth=hello keyhandle=81000001" @u
Since a sha1 hex code must be exactly 40 bytes long and a direct
password must be 20 or less, we use the length as the discriminator
for which form is input.
Note this is both and enhancement and a potential bug fix. The TPM
2.0 spec requires us to strip leading zeros, meaning empyty
authorization is a zero length HMAC whereas we're currently passing in
20 bytes of zeros. A lot of TPMs simply accept this as OK, but the
Microsoft TPM emulator rejects it with TPM_RC_BAD_AUTH, so this patch
makes the Microsoft TPM emulator work with trusted keys.
Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/keys/trusted-type.h | 1 +
security/keys/trusted-keys/trusted_tpm1.c | 32 ++++++++++++++++++-----
security/keys/trusted-keys/trusted_tpm2.c | 10 ++++---
3 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/include/keys/trusted-type.h b/include/keys/trusted-type.h
index a94c03a61d8f..b2ed3481c6a0 100644
--- a/include/keys/trusted-type.h
+++ b/include/keys/trusted-type.h
@@ -30,6 +30,7 @@ struct trusted_key_options {
uint16_t keytype;
uint32_t keyhandle;
unsigned char keyauth[TPM_DIGEST_SIZE];
+ uint32_t blobauth_len;
unsigned char blobauth[TPM_DIGEST_SIZE];
uint32_t pcrinfo_len;
unsigned char pcrinfo[MAX_PCRINFO_SIZE];
diff --git a/security/keys/trusted-keys/trusted_tpm1.c b/security/keys/trusted-keys/trusted_tpm1.c
index 493eb91ed017..1e13c9f7ea8c 100644
--- a/security/keys/trusted-keys/trusted_tpm1.c
+++ b/security/keys/trusted-keys/trusted_tpm1.c
@@ -791,13 +791,33 @@ static int getoptions(char *c, struct trusted_key_payload *pay,
return -EINVAL;
break;
case Opt_blobauth:
- if (strlen(args[0].from) != 2 * SHA1_DIGEST_SIZE)
- return -EINVAL;
- res = hex2bin(opt->blobauth, args[0].from,
- SHA1_DIGEST_SIZE);
- if (res < 0)
- return -EINVAL;
+ /*
+ * TPM 1.2 authorizations are sha1 hashes passed in as
+ * hex strings. TPM 2.0 authorizations are simple
+ * passwords (although it can take a hash as well)
+ */
+ opt->blobauth_len = strlen(args[0].from);
+
+ if (opt->blobauth_len == 2 * TPM_DIGEST_SIZE) {
+ res = hex2bin(opt->blobauth, args[0].from,
+ TPM_DIGEST_SIZE);
+ if (res < 0)
+ return -EINVAL;
+
+ opt->blobauth_len = TPM_DIGEST_SIZE;
+ break;
+ }
+
+ if (tpm2 && opt->blobauth_len <= sizeof(opt->blobauth)) {
+ memcpy(opt->blobauth, args[0].from,
+ opt->blobauth_len);
+ break;
+ }
+
+ return -EINVAL;
+
break;
+
case Opt_migratable:
if (*args[0].from == '0')
pay->migratable = 0;
diff --git a/security/keys/trusted-keys/trusted_tpm2.c b/security/keys/trusted-keys/trusted_tpm2.c
index c87c4df8703d..4c19d3abddbe 100644
--- a/security/keys/trusted-keys/trusted_tpm2.c
+++ b/security/keys/trusted-keys/trusted_tpm2.c
@@ -97,10 +97,12 @@ int tpm2_seal_trusted(struct tpm_chip *chip,
TPM_DIGEST_SIZE);
/* sensitive */
- tpm_buf_append_u16(&buf, 4 + TPM_DIGEST_SIZE + payload->key_len + 1);
+ tpm_buf_append_u16(&buf, 4 + options->blobauth_len + payload->key_len + 1);
+
+ tpm_buf_append_u16(&buf, options->blobauth_len);
+ if (options->blobauth_len)
+ tpm_buf_append(&buf, options->blobauth, options->blobauth_len);
- tpm_buf_append_u16(&buf, TPM_DIGEST_SIZE);
- tpm_buf_append(&buf, options->blobauth, TPM_DIGEST_SIZE);
tpm_buf_append_u16(&buf, payload->key_len + 1);
tpm_buf_append(&buf, payload->key, payload->key_len);
tpm_buf_append_u8(&buf, payload->migratable);
@@ -265,7 +267,7 @@ static int tpm2_unseal_cmd(struct tpm_chip *chip,
NULL /* nonce */, 0,
TPM2_SA_CONTINUE_SESSION,
options->blobauth /* hmac */,
- TPM_DIGEST_SIZE);
+ options->blobauth_len);
rc = tpm_transmit_cmd(chip, &buf, 6, "unsealing");
if (rc > 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 315/677] char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (313 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 314/677] security: keys: trusted: fix TPM2 authorizations Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 316/677] platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table Greg Kroah-Hartman
` (368 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Zhihao Cheng,
Jarkko Sakkinen, Sasha Levin
From: Zhihao Cheng <chengzhihao1@huawei.com>
[ Upstream commit 3d785d73b4c1014839d9f9af0ee526f8d5706a73 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/tpm/tpm_tis_i2c_cr50.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
index ec9a65e7887d..f19c227d20f4 100644
--- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
+++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
@@ -483,6 +483,7 @@ static int tpm_cr50_i2c_tis_recv(struct tpm_chip *chip, u8 *buf, size_t buf_len)
expected = be32_to_cpup((__be32 *)(buf + 2));
if (expected > buf_len) {
dev_err(&chip->dev, "Buffer too small to receive i2c data\n");
+ rc = -E2BIG;
goto out_err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 316/677] platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (314 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 315/677] char: tpm: fix error return code in tpm_cr50_i2c_tis_recv() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 317/677] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation Greg Kroah-Hartman
` (367 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Steffen Dirkwinkel,
Hans de Goede, Sasha Levin
From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
[ Upstream commit d21e5abd3a005253eb033090aab2e43bce090d89 ]
pmc_plt_clk* clocks are used for ethernet controllers, so need to stay
turned on. This adds the affected board family to critclk_systems DMI
table, so the clocks are marked as CLK_CRITICAL and not turned off.
This replaces the previously listed boards with a match for the whole
device family CBxx63. CBxx63 matches only baytrail devices.
There are new affected boards that would otherwise need to be listed.
There are unaffected boards in the family, but having the clocks
turned on is not an issue.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/pmc_atom.c | 28 ++--------------------------
1 file changed, 2 insertions(+), 26 deletions(-)
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index ca684ed760d1..a9d2a4b98e57 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -393,34 +393,10 @@ static const struct dmi_system_id critclk_systems[] = {
},
{
/* pmc_plt_clk* - are used for ethernet controllers */
- .ident = "Beckhoff CB3163",
+ .ident = "Beckhoff Baytrail",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
- DMI_MATCH(DMI_BOARD_NAME, "CB3163"),
- },
- },
- {
- /* pmc_plt_clk* - are used for ethernet controllers */
- .ident = "Beckhoff CB4063",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
- DMI_MATCH(DMI_BOARD_NAME, "CB4063"),
- },
- },
- {
- /* pmc_plt_clk* - are used for ethernet controllers */
- .ident = "Beckhoff CB6263",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
- DMI_MATCH(DMI_BOARD_NAME, "CB6263"),
- },
- },
- {
- /* pmc_plt_clk* - are used for ethernet controllers */
- .ident = "Beckhoff CB6363",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
- DMI_MATCH(DMI_BOARD_NAME, "CB6363"),
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "CBxx63"),
},
},
{
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 317/677] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (315 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 316/677] platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 318/677] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe Greg Kroah-Hartman
` (366 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Heikki Krogerus,
Badhri Jagan Sridharan, Sasha Levin
From: Badhri Jagan Sridharan <badhri@google.com>
[ Upstream commit 123086843372bc93d26f52edfb71dbf951cd2f17 ]
>From PD Spec:
The Sink Shall transition to Sink Standby before a positive or
negative voltage transition of VBUS. During Sink Standby
the Sink Shall reduce its power draw to pSnkStdby. This allows
the Source to manage the voltage transition as well as
supply sufficient operating current to the Sink to maintain PD
operation during the transition. The Sink Shall
complete this transition to Sink Standby within tSnkStdby
after evaluating the Accept Message from the Source. The
transition when returning to Sink operation from Sink Standby
Shall be completed within tSnkNewPower. The
pSnkStdby requirement Shall only apply if the Sink power draw
is higher than this level.
The above requirement needs to be met to prevent hard resets
from port partner.
Without the patch: (5V/3A during SNK_DISCOVERY all the way through
explicit contract)
[ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 95.837190] VBUS on
[ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[ 95.882086] polarity 1
[ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0
[ 95.883441] enable vbus discharge ret:0
[ 95.883445] Requesting mux state 1, usb-role 2, orientation 2
[ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS]
[ 96.038960] VBUS on
[ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms]
[ 96.383946] Setting voltage/current limit 5000 mV 3000 mA
[ 96.383961] vbus=0 charge:=1
[ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS]
[ 96.394404] PD RX, header: 0x2161 [1]
[ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E]
[ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA []
[ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 96.394416] Setting usb_comm capable false
[ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1
[ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA
[ 96.395093] PD TX, header: 0x1042
[ 96.397404] PD TX complete, status: 0
[ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION]
[ 96.400826] PD RX, header: 0x363 [1]
[ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION]
[ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION]
[ 96.577315] PD RX, header: 0x566 [1]
[ 96.577321] Setting voltage/current limit 9000 mV 2000 mA
[ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0
[ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION]
With the patch:
[ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 168.522348] VBUS on
[ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[ 168.568688] polarity 1
[ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0
[ 168.570158] enable vbus discharge ret:0
[ 168.570161] Requesting mux state 1, usb-role 2, orientation 2
[ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS]
[ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms]
[ 169.070695] Setting voltage/current limit 5000 mV 3000 mA
[ 169.070702] vbus=0 charge:=1
[ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS]
[ 169.077162] PD RX, header: 0x2161 [1]
[ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E]
[ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA []
[ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 169.077191] Setting usb_comm capable false
[ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1
[ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA
[ 169.077762] PD TX, header: 0x1042
[ 169.079990] PD TX complete, status: 0
[ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION]
[ 169.083183] VBUS on
[ 169.084195] PD RX, header: 0x363 [1]
[ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION]
[ 169.084206] Setting standby current 5000 mV @ 500 mA
[ 169.084209] Setting voltage/current limit 5000 mV 500 mA
[ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION]
[ 169.260222] PD RX, header: 0x566 [1]
[ 169.260227] Setting voltage/current limit 9000 mV 2000 mA
[ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0
[ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION]
[ 169.261570] AMS POWER_NEGOTIATION finished
Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/typec/tcpm/tcpm.c | 17 +++++++++++++++++
include/linux/usb/pd.h | 2 ++
2 files changed, 19 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index b1040f00c2ba..1a086ba254d2 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4134,6 +4134,23 @@ static void run_state_machine(struct tcpm_port *port)
}
break;
case SNK_TRANSITION_SINK:
+ /* From the USB PD spec:
+ * "The Sink Shall transition to Sink Standby before a positive or
+ * negative voltage transition of VBUS. During Sink Standby
+ * the Sink Shall reduce its power draw to pSnkStdby."
+ *
+ * This is not applicable to PPS though as the port can continue
+ * to draw negotiated power without switching to standby.
+ */
+ if (port->supply_voltage != port->req_supply_voltage && !port->pps_data.active &&
+ port->current_limit * port->supply_voltage / 1000 > PD_P_SNK_STDBY_MW) {
+ u32 stdby_ma = PD_P_SNK_STDBY_MW * 1000 / port->supply_voltage;
+
+ tcpm_log(port, "Setting standby current %u mV @ %u mA",
+ port->supply_voltage, stdby_ma);
+ tcpm_set_current_limit(port, stdby_ma, port->supply_voltage);
+ }
+ fallthrough;
case SNK_TRANSITION_SINK_VBUS:
tcpm_set_state(port, hard_reset_state(port),
PD_T_PS_TRANSITION);
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index 70d681918d01..bf00259493e0 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -493,4 +493,6 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
#define PD_N_HARD_RESET_COUNT 2
+#define PD_P_SNK_STDBY_MW 2500 /* 2500 mW */
+
#endif /* __LINUX_USB_PD_H */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 318/677] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (316 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 317/677] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 319/677] ARM: dts: aspeed: Rainier: Fix humidity sensor bus address Greg Kroah-Hartman
` (365 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dinghao Liu, Mark Brown, Sasha Levin
From: Dinghao Liu <dinghao.liu@zju.edu.cn>
[ Upstream commit a21fbc42807b15b74b0891bd557063e6acf4fcae ]
When platform_get_irq() fails, a pairing PM usage counter
increment is needed to keep the counter balanced. It's the
same for the following error paths.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210408092559.3824-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 408e348382c5..32e53f379e9b 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1163,11 +1163,16 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to pm_runtime_get_sync: %d\n", ret);
+ goto clk_dis_all;
+ }
+
/* QSPI controller initializations */
zynqmp_qspi_init_hw(xqspi);
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
@@ -1190,6 +1195,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
SPI_TX_DUAL | SPI_TX_QUAD;
ctlr->dev.of_node = np;
+ ctlr->auto_runtime_pm = true;
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret) {
@@ -1197,9 +1203,13 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
clk_dis_all:
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(xqspi->refclk);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 319/677] ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (317 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 318/677] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 320/677] Drivers: hv: vmbus: Use after free in __vmbus_open() Greg Kroah-Hartman
` (364 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eddie James, Joel Stanley, Sasha Levin
From: Eddie James <eajames@linux.ibm.com>
[ Upstream commit 1d5d46a1adafafce2b0c9105eab563709c84e3db ]
The si7021 was incorrectly placed at 0x20 on i2c bus 7. It is at 0x40.
Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6c9804d2f3b4..6df1ce545061 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -713,9 +713,9 @@
multi-master;
status = "okay";
- si7021-a20@20 {
+ si7021-a20@40 {
compatible = "silabs,si7020";
- reg = <0x20>;
+ reg = <0x40>;
};
tmp275@48 {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 320/677] Drivers: hv: vmbus: Use after free in __vmbus_open()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (318 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 319/677] ARM: dts: aspeed: Rainier: Fix humidity sensor bus address Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 321/677] crypto: arm64/aes-ce - deal with oversight in new CTR carry code Greg Kroah-Hartman
` (363 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Andrea Parri, Wei Liu,
Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 3e9bf43f7f7a46f21ec071cb47be92d0874c48da ]
The "open_info" variable is added to the &vmbus_connection.chn_msg_list,
but the error handling frees "open_info" without removing it from the
list. This will result in a use after free. First remove it from the
list, and then free it.
Fixes: 6f3d791f3006 ("Drivers: hv: vmbus: Fix rescind handling issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/YHV3XLCot6xBS44r@mwanda
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hv/channel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 0bd202de7960..945e41f5e3a8 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -653,7 +653,7 @@ static int __vmbus_open(struct vmbus_channel *newchannel,
if (newchannel->rescind) {
err = -ENODEV;
- goto error_free_info;
+ goto error_clean_msglist;
}
err = vmbus_post_msg(open_msg,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 321/677] crypto: arm64/aes-ce - deal with oversight in new CTR carry code
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (319 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 320/677] Drivers: hv: vmbus: Use after free in __vmbus_open() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 322/677] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue Greg Kroah-Hartman
` (362 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Herbert Xu, Sasha Levin
From: Ard Biesheuvel <ardb@kernel.org>
[ Upstream commit 0f19dbc994dcb7f7137f2e056e813c84530b7538 ]
The new carry handling code in the CTR driver can deal with a carry
occurring in the 4x/5x parallel code path, by using a computed goto to
jump into the carry sequence at the right place as to only apply the
carry to a subset of the blocks being processed.
If the lower half of the counter wraps and ends up at exactly 0x0, a
carry needs to be applied to the counter, but not to the counter values
taken for the 4x/5x parallel sequence. In this case, the computed goto
skips all register assignments, and branches straight to the jump
instruction that gets us back to the fast path. This produces the
correct result, but due to the fact that this branch target does not
carry the correct BTI annotation, this fails when BTI is enabled.
Let's omit the computed goto entirely in this case, and jump straight
back to the fast path after applying the carry to the main counter.
Fixes: 5318d3db465d ("crypto: arm64/aes-ctr - improve tail handling")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/crypto/aes-modes.S | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
index bbdb54702aa7..247011356d11 100644
--- a/arch/arm64/crypto/aes-modes.S
+++ b/arch/arm64/crypto/aes-modes.S
@@ -359,6 +359,7 @@ ST5( mov v4.16b, vctr.16b )
ins vctr.d[0], x8
/* apply carry to N counter blocks for N := x12 */
+ cbz x12, 2f
adr x16, 1f
sub x16, x16, x12, lsl #3
br x16
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 322/677] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (320 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 321/677] crypto: arm64/aes-ce - deal with oversight in new CTR carry code Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 323/677] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume Greg Kroah-Hartman
` (361 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit c6bdae08012b2ca3e94f3a41ef4ca8cfe7c9ab6f ]
The clks "pclk" and "ref_clk" are enabled twice during the probe. The
first time is in the function zynqmp_qspi_probe and the second time is
in zynqmp_qspi_setup_op which is called by devm_spi_register_controller.
Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks
will trigger a warning as below:
[ 309.124604] Unpreparing enabled qspi_ref
[ 309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110
Since pm_runtime works now, clks can be enabled/disabled by calling
zynqmp_runtime_suspend/resume. So we don't need to enable these clks
explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue.
And remove clk enabling/disabling in zynqmp_qspi_resume because there is
no spi transfer operation so enabling ref_clk is redundant meanwhile pclk
is not disabled for it is shared with other peripherals.
Furthermore replace clk_enable/disable with clk_prepare_enable and
clk_disable_unprepare in runtime_suspend/resume functions.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-2-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 47 ++++++----------------------------
1 file changed, 8 insertions(+), 39 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 32e53f379e9b..f9056f0a480c 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -487,24 +487,10 @@ static int zynqmp_qspi_setup_op(struct spi_device *qspi)
{
struct spi_controller *ctlr = qspi->master;
struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
- struct device *dev = &ctlr->dev;
- int ret;
if (ctlr->busy)
return -EBUSY;
- ret = clk_enable(xqspi->refclk);
- if (ret) {
- dev_err(dev, "Cannot enable device clock.\n");
- return ret;
- }
-
- ret = clk_enable(xqspi->pclk);
- if (ret) {
- dev_err(dev, "Cannot enable APB clock.\n");
- clk_disable(xqspi->refclk);
- return ret;
- }
zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
return 0;
@@ -863,26 +849,9 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
- struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
- int ret = 0;
-
- ret = clk_enable(xqspi->pclk);
- if (ret) {
- dev_err(dev, "Cannot enable APB clock.\n");
- return ret;
- }
-
- ret = clk_enable(xqspi->refclk);
- if (ret) {
- dev_err(dev, "Cannot enable device clock.\n");
- clk_disable(xqspi->pclk);
- return ret;
- }
spi_controller_resume(ctlr);
- clk_disable(xqspi->refclk);
- clk_disable(xqspi->pclk);
return 0;
}
@@ -898,8 +867,8 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
{
struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
- clk_disable(xqspi->refclk);
- clk_disable(xqspi->pclk);
+ clk_disable_unprepare(xqspi->refclk);
+ clk_disable_unprepare(xqspi->pclk);
return 0;
}
@@ -917,16 +886,16 @@ static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
int ret;
- ret = clk_enable(xqspi->pclk);
+ ret = clk_prepare_enable(xqspi->pclk);
if (ret) {
dev_err(dev, "Cannot enable APB clock.\n");
return ret;
}
- ret = clk_enable(xqspi->refclk);
+ ret = clk_prepare_enable(xqspi->refclk);
if (ret) {
dev_err(dev, "Cannot enable device clock.\n");
- clk_disable(xqspi->pclk);
+ clk_disable_unprepare(xqspi->pclk);
return ret;
}
@@ -1136,13 +1105,11 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto remove_master;
}
- init_completion(&xqspi->data_completion);
-
xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xqspi->refclk)) {
dev_err(dev, "ref_clk clock not found.\n");
ret = PTR_ERR(xqspi->refclk);
- goto clk_dis_pclk;
+ goto remove_master;
}
ret = clk_prepare_enable(xqspi->pclk);
@@ -1157,6 +1124,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_pclk;
}
+ init_completion(&xqspi->data_completion);
+
mutex_init(&xqspi->op_lock);
pm_runtime_use_autosuspend(&pdev->dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 323/677] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (321 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 322/677] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 324/677] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op Greg Kroah-Hartman
` (360 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit 799f923f0a66a9c99f0a3eaa078b306db7a8b33a ]
After calling platform_set_drvdata(pdev, xqspi) in probe, the return
value of dev_get_drvdata(dev) is a pointer to struct zynqmp_qspi but
not struct spi_controller. A wrong structure type passing to the
functions spi_controller_suspend/resume will hang the system.
And we should check the return value of spi_controller_suspend, if
an error is returned, return it to PM subsystem to stop suspend.
Also, GQSPI_EN_MASK should be written to GQSPI_EN_OFST to enable
the spi controller in zynqmp_qspi_resume since it was disabled in
zynqmp_qspi_suspend before.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-3-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index f9056f0a480c..1146359528b9 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -157,6 +157,7 @@ enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
* @data_completion: completion structure
*/
struct zynqmp_qspi {
+ struct spi_controller *ctlr;
void __iomem *regs;
struct clk *refclk;
struct clk *pclk;
@@ -827,10 +828,13 @@ static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
*/
static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
{
- struct spi_controller *ctlr = dev_get_drvdata(dev);
- struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
+ struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
+ struct spi_controller *ctlr = xqspi->ctlr;
+ int ret;
- spi_controller_suspend(ctlr);
+ ret = spi_controller_suspend(ctlr);
+ if (ret)
+ return ret;
zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
@@ -848,7 +852,10 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
{
- struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
+ struct spi_controller *ctlr = xqspi->ctlr;
+
+ zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
spi_controller_resume(ctlr);
@@ -865,7 +872,7 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
*/
static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
{
- struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
+ struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
clk_disable_unprepare(xqspi->refclk);
clk_disable_unprepare(xqspi->pclk);
@@ -883,7 +890,7 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
*/
static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
{
- struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
+ struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(xqspi->pclk);
@@ -1090,6 +1097,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
xqspi = spi_controller_get_devdata(ctlr);
xqspi->dev = dev;
+ xqspi->ctlr = ctlr;
platform_set_drvdata(pdev, xqspi);
xqspi->regs = devm_platform_ioremap_resource(pdev, 0);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 324/677] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (322 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 323/677] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 325/677] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails Greg Kroah-Hartman
` (359 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit a2c5bedb2d55dd27c642c7b9fb6886d7ad7bdb58 ]
When handling op->addr, it is using the buffer "tmpbuf" which has been
freed. This will trigger a use-after-free KASAN warning. Let's use
temporary variables to store op->addr.val and op->cmd.opcode to fix
this issue.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-5-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 1146359528b9..8cd20ff084f4 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -926,8 +926,9 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
struct zynqmp_qspi *xqspi = spi_controller_get_devdata
(mem->spi->master);
int err = 0, i;
- u8 *tmpbuf;
u32 genfifoentry = 0;
+ u16 opcode = op->cmd.opcode;
+ u64 opaddr;
dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
@@ -940,14 +941,8 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
genfifoentry |= xqspi->genfifobus;
if (op->cmd.opcode) {
- tmpbuf = kzalloc(op->cmd.nbytes, GFP_KERNEL | GFP_DMA);
- if (!tmpbuf) {
- mutex_unlock(&xqspi->op_lock);
- return -ENOMEM;
- }
- tmpbuf[0] = op->cmd.opcode;
reinit_completion(&xqspi->data_completion);
- xqspi->txbuf = tmpbuf;
+ xqspi->txbuf = &opcode;
xqspi->rxbuf = NULL;
xqspi->bytes_to_transfer = op->cmd.nbytes;
xqspi->bytes_to_receive = 0;
@@ -961,13 +956,12 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
if (!wait_for_completion_timeout
(&xqspi->data_completion, msecs_to_jiffies(1000))) {
err = -ETIMEDOUT;
- kfree(tmpbuf);
goto return_err;
}
- kfree(tmpbuf);
}
if (op->addr.nbytes) {
+ xqspi->txbuf = &opaddr;
for (i = 0; i < op->addr.nbytes; i++) {
*(((u8 *)xqspi->txbuf) + i) = op->addr.val >>
(8 * (op->addr.nbytes - i - 1));
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 325/677] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (323 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 324/677] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 326/677] btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex Greg Kroah-Hartman
` (358 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit 126bdb606fd2802454e6048caef1be3e25dd121e ]
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-6-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynqmp-gqspi.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 8cd20ff084f4..7162387b9f96 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -731,7 +731,7 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
* zynqmp_qspi_setuprxdma - This function sets up the RX DMA operation
* @xqspi: xqspi is a pointer to the GQSPI instance.
*/
-static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
+static int zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
{
u32 rx_bytes, rx_rem, config_reg;
dma_addr_t addr;
@@ -745,7 +745,7 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
xqspi->mode = GQSPI_MODE_IO;
xqspi->dma_rx_bytes = 0;
- return;
+ return 0;
}
rx_rem = xqspi->bytes_to_receive % 4;
@@ -753,8 +753,10 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
addr = dma_map_single(xqspi->dev, (void *)xqspi->rxbuf,
rx_bytes, DMA_FROM_DEVICE);
- if (dma_mapping_error(xqspi->dev, addr))
+ if (dma_mapping_error(xqspi->dev, addr)) {
dev_err(xqspi->dev, "ERR:rxdma:memory not mapped\n");
+ return -ENOMEM;
+ }
xqspi->dma_rx_bytes = rx_bytes;
xqspi->dma_addr = addr;
@@ -775,6 +777,8 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
/* Write the number of bytes to transfer */
zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_SIZE_OFST, rx_bytes);
+
+ return 0;
}
/**
@@ -811,11 +815,17 @@ static void zynqmp_qspi_write_op(struct zynqmp_qspi *xqspi, u8 tx_nbits,
* @genfifoentry: genfifoentry is pointer to the variable in which
* GENFIFO mask is returned to calling function
*/
-static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
+static int zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
u32 genfifoentry)
{
- zynqmp_qspi_setuprxdma(xqspi);
+ int ret;
+
+ ret = zynqmp_qspi_setuprxdma(xqspi);
+ if (ret)
+ return ret;
zynqmp_qspi_fillgenfifo(xqspi, rx_nbits, genfifoentry);
+
+ return 0;
}
/**
@@ -1029,8 +1039,11 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
xqspi->rxbuf = (u8 *)op->data.buf.in;
xqspi->bytes_to_receive = op->data.nbytes;
xqspi->bytes_to_transfer = 0;
- zynqmp_qspi_read_op(xqspi, op->data.buswidth,
+ err = zynqmp_qspi_read_op(xqspi, op->data.buswidth,
genfifoentry);
+ if (err)
+ goto return_err;
+
zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
zynqmp_gqspi_read
(xqspi, GQSPI_CONFIG_OFST) |
@@ -1157,6 +1170,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
+ dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
ctlr->mem_ops = &zynqmp_qspi_mem_ops;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 326/677] btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (324 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 325/677] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 327/677] btrfs: zoned: bail out in btrfs_alloc_chunk for bad input Greg Kroah-Hartman
` (357 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, Johannes Thumshirn,
Naohiro Aota, David Sterba, Sasha Levin
From: Naohiro Aota <naohiro.aota@wdc.com>
[ Upstream commit e75f9fd194090e69c5ffd856ba89160683d343da ]
Commit 6e37d2459941 ("btrfs: zoned: fix deadlock on log sync") pointed out
a deadlock warning and removed mutex_{lock,unlock} of fs_info::tree_root->log_mutex.
While it looks like it always cause a deadlock, we didn't see actual
deadlock in fstests runs. The reason is log_root_tree->log_mutex !=
fs_info->tree_root->log_mutex, not taking the same lock. So, the warning
was actually a false-positive.
Since btrfs_alloc_log_tree_node() is protected only by
fs_info->tree_root->log_mutex, we can (and should) move the code out of
the lock scope of log_root_tree->log_mutex and silence the warning.
Fixes: 6e37d2459941 ("btrfs: zoned: fix deadlock on log sync")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/tree-log.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 92a368627791..72c4b66ed516 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3165,20 +3165,22 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
*/
mutex_unlock(&root->log_mutex);
- btrfs_init_log_ctx(&root_log_ctx, NULL);
-
- mutex_lock(&log_root_tree->log_mutex);
-
if (btrfs_is_zoned(fs_info)) {
+ mutex_lock(&fs_info->tree_root->log_mutex);
if (!log_root_tree->node) {
ret = btrfs_alloc_log_tree_node(trans, log_root_tree);
if (ret) {
- mutex_unlock(&log_root_tree->log_mutex);
+ mutex_unlock(&fs_info->tree_log_mutex);
goto out;
}
}
+ mutex_unlock(&fs_info->tree_root->log_mutex);
}
+ btrfs_init_log_ctx(&root_log_ctx, NULL);
+
+ mutex_lock(&log_root_tree->log_mutex);
+
index2 = log_root_tree->log_transid % 2;
list_add_tail(&root_log_ctx.list, &log_root_tree->log_ctxs[index2]);
root_log_ctx.log_transid = log_root_tree->log_transid;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 327/677] btrfs: zoned: bail out in btrfs_alloc_chunk for bad input
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (325 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 326/677] btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 328/677] x86/platform/uv: Fix !KEXEC build failure Greg Kroah-Hartman
` (356 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, David Sterba, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit bb05b298af8b2330db2b39971bf0029798e7ad59 ]
gcc complains that the ctl->max_chunk_size member might be used
uninitialized when none of the three conditions for initializing it in
init_alloc_chunk_ctl_policy_zoned() are true:
In function ‘init_alloc_chunk_ctl_policy_zoned’,
inlined from ‘init_alloc_chunk_ctl’ at fs/btrfs/volumes.c:5023:3,
inlined from ‘btrfs_alloc_chunk’ at fs/btrfs/volumes.c:5340:2:
include/linux/compiler-gcc.h:48:45: error: ‘ctl.max_chunk_size’ may be used uninitialized [-Werror=maybe-uninitialized]
4998 | ctl->max_chunk_size = min(limit, ctl->max_chunk_size);
| ^~~
fs/btrfs/volumes.c: In function ‘btrfs_alloc_chunk’:
fs/btrfs/volumes.c:5316:32: note: ‘ctl’ declared here
5316 | struct alloc_chunk_ctl ctl;
| ^~~
If we ever get into this condition, something is seriously
wrong, as validity is checked in the callers
btrfs_alloc_chunk
init_alloc_chunk_ctl
init_alloc_chunk_ctl_policy_zoned
so the same logic as in init_alloc_chunk_ctl_policy_regular()
and a few other places should be applied. This avoids both further
data corruption, and the compile-time warning.
Fixes: 1cd6121f2a38 ("btrfs: zoned: implement zoned chunk allocator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/volumes.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 1c6810bbaf8b..3912eda7905f 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4989,6 +4989,8 @@ static void init_alloc_chunk_ctl_policy_zoned(
ctl->max_chunk_size = 2 * ctl->max_stripe_size;
ctl->devs_max = min_t(int, ctl->devs_max,
BTRFS_MAX_DEVS_SYS_CHUNK);
+ } else {
+ BUG();
}
/* We don't want a chunk larger than 10% of writable space */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 328/677] x86/platform/uv: Fix !KEXEC build failure
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (326 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 327/677] btrfs: zoned: bail out in btrfs_alloc_chunk for bad input Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 329/677] hwmon: (pmbus/pxe1610) dont bail out when not all pages are active Greg Kroah-Hartman
` (355 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ingo Molnar, Mike Travis, Sasha Levin
From: Ingo Molnar <mingo@kernel.org>
[ Upstream commit c2209ea55612efac75de0a58ef5f7394fae7fa0f ]
When KEXEC is disabled, the UV build fails:
arch/x86/platform/uv/uv_nmi.c:875:14: error: ‘uv_nmi_kexec_failed’ undeclared (first use in this function)
Since uv_nmi_kexec_failed is only defined in the KEXEC_CORE #ifdef branch,
this code cannot ever have been build tested:
if (main)
pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n");
atomic_set(&uv_nmi_kexec_failed, 1);
Nor is this use possible in uv_handle_nmi():
atomic_set(&uv_nmi_kexec_failed, 0);
These bugs were introduced in this commit:
d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")
Which added the uv_nmi_kexec_failed assignments to !KEXEC code, while making the
definition KEXEC-only - apparently without testing the !KEXEC case.
Instead of complicating the #ifdef maze, simplify the code by requiring X86_UV
to depend on KEXEC_CORE. This pattern is present in other architectures as well.
( We'll remove the untested, 7 years old !KEXEC complications from the file in a
separate commit. )
Fixes: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 268b7d5c9835..861b1b794697 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -571,6 +571,7 @@ config X86_UV
depends on X86_EXTENDED_PLATFORM
depends on NUMA
depends on EFI
+ depends on KEXEC_CORE
depends on X86_X2APIC
depends on PCI
help
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 329/677] hwmon: (pmbus/pxe1610) dont bail out when not all pages are active
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (327 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 328/677] x86/platform/uv: Fix !KEXEC build failure Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 330/677] platform/surface: aggregator: fix a bit test Greg Kroah-Hartman
` (354 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Fertser, Guenter Roeck, Sasha Levin
From: Paul Fertser <fercerpav@gmail.com>
[ Upstream commit f025314306ae17a3fdaf2874d7e878ce19cea363 ]
Certain VRs might be configured to use only the first output channel and
so the mode for the second will be 0. Handle this gracefully.
Fixes: b9fa0a3acfd8 ("hwmon: (pmbus/core) Add support for vid mode detection per page bases")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210416102926.13614-1-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/pmbus/pxe1610.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
index da27ce34ee3f..eb4a06003b7f 100644
--- a/drivers/hwmon/pmbus/pxe1610.c
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -41,6 +41,15 @@ static int pxe1610_identify(struct i2c_client *client,
info->vrm_version[i] = vr13;
break;
default:
+ /*
+ * If prior pages are available limit operation
+ * to them
+ */
+ if (i != 0) {
+ info->pages = i;
+ return 0;
+ }
+
return -ENODEV;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 330/677] platform/surface: aggregator: fix a bit test
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (328 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 329/677] hwmon: (pmbus/pxe1610) dont bail out when not all pages are active Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 331/677] Drivers: hv: vmbus: Increase wait time for VMbus unload Greg Kroah-Hartman
` (353 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Maximilian Luz, Hans de Goede, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 366f0a30c8a01e79255221539a52909cc4c7bd25 ]
The "funcs" variable is a u64. If "func" is more than 31 then the
BIT() shift will wrap instead of testing the high bits.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/YH6UUhJhGk3mk13b@mwanda
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/surface/aggregator/controller.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index 5bcb59ed579d..89761d3e1a47 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -1040,7 +1040,7 @@ static int ssam_dsm_load_u32(acpi_handle handle, u64 funcs, u64 func, u32 *ret)
union acpi_object *obj;
u64 val;
- if (!(funcs & BIT(func)))
+ if (!(funcs & BIT_ULL(func)))
return 0; /* Not supported, leave *ret at its default value */
obj = acpi_evaluate_dsm_typed(handle, &SSAM_SSH_DSM_GUID,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 331/677] Drivers: hv: vmbus: Increase wait time for VMbus unload
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (329 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 330/677] platform/surface: aggregator: fix a bit test Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 332/677] PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check Greg Kroah-Hartman
` (352 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Kelley, Vitaly Kuznetsov,
Wei Liu, Sasha Levin
From: Michael Kelley <mikelley@microsoft.com>
[ Upstream commit 77db0ec8b7764cb9b09b78066ebfd47b2c0c1909 ]
When running in Azure, disks may be connected to a Linux VM with
read/write caching enabled. If a VM panics and issues a VMbus
UNLOAD request to Hyper-V, the response is delayed until all dirty
data in the disk cache is flushed. In extreme cases, this flushing
can take 10's of seconds, depending on the disk speed and the amount
of dirty data. If kdump is configured for the VM, the current 10 second
timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD
complete message may arrive well after the kdump kernel is already
running, causing problems. Note that no problem occurs if kdump is
not enabled because Hyper-V waits for the cache flush before doing
a reboot through the BIOS/UEFI code.
Fix this problem by increasing the timeout in vmbus_wait_for_unload()
to 100 seconds. Also output periodic messages so that if anyone is
watching the serial console, they won't think the VM is completely
hung.
Fixes: 911e1987efc8 ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hv/channel_mgmt.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index f0ed730e2e4e..ecebf1235fd5 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -756,6 +756,12 @@ static void init_vp_index(struct vmbus_channel *channel)
free_cpumask_var(available_mask);
}
+#define UNLOAD_DELAY_UNIT_MS 10 /* 10 milliseconds */
+#define UNLOAD_WAIT_MS (100*1000) /* 100 seconds */
+#define UNLOAD_WAIT_LOOPS (UNLOAD_WAIT_MS/UNLOAD_DELAY_UNIT_MS)
+#define UNLOAD_MSG_MS (5*1000) /* Every 5 seconds */
+#define UNLOAD_MSG_LOOPS (UNLOAD_MSG_MS/UNLOAD_DELAY_UNIT_MS)
+
static void vmbus_wait_for_unload(void)
{
int cpu;
@@ -773,12 +779,17 @@ static void vmbus_wait_for_unload(void)
* vmbus_connection.unload_event. If not, the last thing we can do is
* read message pages for all CPUs directly.
*
- * Wait no more than 10 seconds so that the panic path can't get
- * hung forever in case the response message isn't seen.
+ * Wait up to 100 seconds since an Azure host must writeback any dirty
+ * data in its disk cache before the VMbus UNLOAD request will
+ * complete. This flushing has been empirically observed to take up
+ * to 50 seconds in cases with a lot of dirty data, so allow additional
+ * leeway and for inaccuracies in mdelay(). But eventually time out so
+ * that the panic path can't get hung forever in case the response
+ * message isn't seen.
*/
- for (i = 0; i < 1000; i++) {
+ for (i = 1; i <= UNLOAD_WAIT_LOOPS; i++) {
if (completion_done(&vmbus_connection.unload_event))
- break;
+ goto completed;
for_each_online_cpu(cpu) {
struct hv_per_cpu_context *hv_cpu
@@ -801,9 +812,18 @@ static void vmbus_wait_for_unload(void)
vmbus_signal_eom(msg, message_type);
}
- mdelay(10);
+ /*
+ * Give a notice periodically so someone watching the
+ * serial output won't think it is completely hung.
+ */
+ if (!(i % UNLOAD_MSG_LOOPS))
+ pr_notice("Waiting for VMBus UNLOAD to complete\n");
+
+ mdelay(UNLOAD_DELAY_UNIT_MS);
}
+ pr_err("Continuing even though VMBus UNLOAD did not complete\n");
+completed:
/*
* We're crashing and already got the UNLOAD_RESPONSE, cleanup all
* maybe-pending messages on all CPUs to be able to receive new
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 332/677] PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (330 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 331/677] Drivers: hv: vmbus: Increase wait time for VMbus unload Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 333/677] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Greg Kroah-Hartman
` (351 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Biggers, Dexuan Cui,
Chris von Recklinghausen, Rafael J. Wysocki, Sasha Levin
From: Chris von Recklinghausen <crecklin@redhat.com>
[ Upstream commit f5d1499ae2096d7ea301023c4cc54e427300eb0a ]
Hibernation fails on a system in fips mode because md5 is used for the e820
integrity check and is not available. Use crc32 instead.
The check is intended to detect whether the E820 memory map provided
by the firmware after cold boot unexpectedly differs from the one that
was in use when the hibernation image was created. In this case, the
hibernation image cannot be restored, as it may cover memory regions
that are no longer available to the OS.
A non-cryptographic checksum such as CRC-32 is sufficient to detect such
inadvertent deviations.
Fixes: 62a03defeabd ("PM / hibernate: Verify the consistent of e820 memory map by md5 digest")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/e820.c | 4 +-
arch/x86/power/hibernate.c | 89 ++++++--------------------------------
2 files changed, 16 insertions(+), 77 deletions(-)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 22aad412f965..629c4994f165 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -31,8 +31,8 @@
* - inform the user about the firmware's notion of memory layout
* via /sys/firmware/memmap
*
- * - the hibernation code uses it to generate a kernel-independent MD5
- * fingerprint of the physical memory layout of a system.
+ * - the hibernation code uses it to generate a kernel-independent CRC32
+ * checksum of the physical memory layout of a system.
*
* - 'e820_table_kexec': a slightly modified (by the kernel) firmware version
* passed to us by the bootloader - the major difference between
diff --git a/arch/x86/power/hibernate.c b/arch/x86/power/hibernate.c
index cd3914fc9f3d..e94e0050a583 100644
--- a/arch/x86/power/hibernate.c
+++ b/arch/x86/power/hibernate.c
@@ -13,8 +13,8 @@
#include <linux/kdebug.h>
#include <linux/cpu.h>
#include <linux/pgtable.h>
-
-#include <crypto/hash.h>
+#include <linux/types.h>
+#include <linux/crc32.h>
#include <asm/e820/api.h>
#include <asm/init.h>
@@ -54,95 +54,33 @@ int pfn_is_nosave(unsigned long pfn)
return pfn >= nosave_begin_pfn && pfn < nosave_end_pfn;
}
-
-#define MD5_DIGEST_SIZE 16
-
struct restore_data_record {
unsigned long jump_address;
unsigned long jump_address_phys;
unsigned long cr3;
unsigned long magic;
- u8 e820_digest[MD5_DIGEST_SIZE];
+ unsigned long e820_checksum;
};
-#if IS_BUILTIN(CONFIG_CRYPTO_MD5)
/**
- * get_e820_md5 - calculate md5 according to given e820 table
+ * compute_e820_crc32 - calculate crc32 of a given e820 table
*
* @table: the e820 table to be calculated
- * @buf: the md5 result to be stored to
+ *
+ * Return: the resulting checksum
*/
-static int get_e820_md5(struct e820_table *table, void *buf)
+static inline u32 compute_e820_crc32(struct e820_table *table)
{
- struct crypto_shash *tfm;
- struct shash_desc *desc;
- int size;
- int ret = 0;
-
- tfm = crypto_alloc_shash("md5", 0, 0);
- if (IS_ERR(tfm))
- return -ENOMEM;
-
- desc = kmalloc(sizeof(struct shash_desc) + crypto_shash_descsize(tfm),
- GFP_KERNEL);
- if (!desc) {
- ret = -ENOMEM;
- goto free_tfm;
- }
-
- desc->tfm = tfm;
-
- size = offsetof(struct e820_table, entries) +
+ int size = offsetof(struct e820_table, entries) +
sizeof(struct e820_entry) * table->nr_entries;
- if (crypto_shash_digest(desc, (u8 *)table, size, buf))
- ret = -EINVAL;
-
- kfree_sensitive(desc);
-
-free_tfm:
- crypto_free_shash(tfm);
- return ret;
-}
-
-static int hibernation_e820_save(void *buf)
-{
- return get_e820_md5(e820_table_firmware, buf);
-}
-
-static bool hibernation_e820_mismatch(void *buf)
-{
- int ret;
- u8 result[MD5_DIGEST_SIZE];
-
- memset(result, 0, MD5_DIGEST_SIZE);
- /* If there is no digest in suspend kernel, let it go. */
- if (!memcmp(result, buf, MD5_DIGEST_SIZE))
- return false;
-
- ret = get_e820_md5(e820_table_firmware, result);
- if (ret)
- return true;
-
- return memcmp(result, buf, MD5_DIGEST_SIZE) ? true : false;
-}
-#else
-static int hibernation_e820_save(void *buf)
-{
- return 0;
-}
-
-static bool hibernation_e820_mismatch(void *buf)
-{
- /* If md5 is not builtin for restore kernel, let it go. */
- return false;
+ return ~crc32_le(~0, (unsigned char const *)table, size);
}
-#endif
#ifdef CONFIG_X86_64
-#define RESTORE_MAGIC 0x23456789ABCDEF01UL
+#define RESTORE_MAGIC 0x23456789ABCDEF02UL
#else
-#define RESTORE_MAGIC 0x12345678UL
+#define RESTORE_MAGIC 0x12345679UL
#endif
/**
@@ -179,7 +117,8 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
*/
rdr->cr3 = restore_cr3 & ~CR3_PCID_MASK;
- return hibernation_e820_save(rdr->e820_digest);
+ rdr->e820_checksum = compute_e820_crc32(e820_table_firmware);
+ return 0;
}
/**
@@ -200,7 +139,7 @@ int arch_hibernation_header_restore(void *addr)
jump_address_phys = rdr->jump_address_phys;
restore_cr3 = rdr->cr3;
- if (hibernation_e820_mismatch(rdr->e820_digest)) {
+ if (rdr->e820_checksum != compute_e820_crc32(e820_table_firmware)) {
pr_crit("Hibernate inconsistent memory map detected!\n");
return -ENODEV;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 333/677] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (331 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 332/677] PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 334/677] usb: dwc2: Fix hibernation between host and device modes Greg Kroah-Hartman
` (350 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Minas Harutyunyan, Artur Petrosyan,
Sasha Levin
From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
[ Upstream commit c2db8d7b9568b10e014af83b3c15e39929e3579e ]
Added setting "port_connect_status_change" flag to "1" in order
to re-enumerate, because after exit from hibernation port
connection status is not detected.
Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124707.5EEC2A005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc2/hcd.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 1a9789ec5847..6af1dcbc3656 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5580,7 +5580,15 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
return ret;
}
- dwc2_hcd_rem_wakeup(hsotg);
+ if (rem_wakeup) {
+ dwc2_hcd_rem_wakeup(hsotg);
+ /*
+ * Change "port_connect_status_change" flag to re-enumerate,
+ * because after exit from hibernation port connection status
+ * is not detected.
+ */
+ hsotg->flags.b.port_connect_status_change = 1;
+ }
hsotg->hibernated = 0;
hsotg->bus_suspended = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 334/677] usb: dwc2: Fix hibernation between host and device modes.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (332 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 333/677] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 335/677] ttyprintk: Add TTY hangup callback Greg Kroah-Hartman
` (349 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Minas Harutyunyan, Artur Petrosyan,
Sasha Levin
From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
[ Upstream commit 24d209dba5a3959b2ebde7cf3ad40c8015e814cf ]
When core is in hibernation in host mode and a device cable
was connected then driver exited from device hibernation.
However, registers saved for host mode and when exited from
device hibernation register restore would be done for device
register which was wrong because there was no device registers
stored to restore.
- Added dwc_handle_gpwrdn_disc_det() function which handles
gpwrdn disconnect detect flow and exits hibernation
without restoring the registers.
- Updated exiting from hibernation in GPWRDN_STS_CHGINT with
calling dwc_handle_gpwrdn_disc_det() function. Here no register
is restored which is the solution described above.
Fixes: 65c9c4c6b01f ("usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124715.75355A005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc2/core_intr.c | 154 +++++++++++++++++++----------------
1 file changed, 83 insertions(+), 71 deletions(-)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 800c8b6c55ff..510fd0572feb 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -660,6 +660,71 @@ static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
return 0;
}
+/**
+ * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
+ * Exits hibernation without restoring registers.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @gpwrdn: GPWRDN register
+ */
+static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
+ u32 gpwrdn)
+{
+ u32 gpwrdn_tmp;
+
+ /* Switch-on voltage to the core */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+ udelay(5);
+
+ /* Reset core */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+ udelay(5);
+
+ /* Disable Power Down Clamp */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+ udelay(5);
+
+ /* Deassert reset core */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+ udelay(5);
+
+ /* Disable PMU interrupt */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+ /* De-assert Wakeup Logic */
+ gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+ gpwrdn_tmp &= ~GPWRDN_PMUACTV;
+ dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+ hsotg->hibernated = 0;
+ hsotg->bus_suspended = 0;
+
+ if (gpwrdn & GPWRDN_IDSTS) {
+ hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+ dwc2_core_init(hsotg, false);
+ dwc2_enable_global_interrupts(hsotg);
+ dwc2_hsotg_core_init_disconnected(hsotg, false);
+ dwc2_hsotg_core_connect(hsotg);
+ } else {
+ hsotg->op_state = OTG_STATE_A_HOST;
+
+ /* Initialize the Core for Host mode */
+ dwc2_core_init(hsotg, false);
+ dwc2_enable_global_interrupts(hsotg);
+ dwc2_hcd_start(hsotg);
+ }
+}
+
/*
* GPWRDN interrupt handler.
*
@@ -681,64 +746,14 @@ static void dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
if ((gpwrdn & GPWRDN_DISCONN_DET) &&
(gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
- u32 gpwrdn_tmp;
-
dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
-
- /* Switch-on voltage to the core */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
- udelay(10);
-
- /* Reset core */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
- udelay(10);
-
- /* Disable Power Down Clamp */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
- udelay(10);
-
- /* Deassert reset core */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
- udelay(10);
-
- /* Disable PMU interrupt */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
-
- /* De-assert Wakeup Logic */
- gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
- gpwrdn_tmp &= ~GPWRDN_PMUACTV;
- dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
-
- hsotg->hibernated = 0;
-
- if (gpwrdn & GPWRDN_IDSTS) {
- hsotg->op_state = OTG_STATE_B_PERIPHERAL;
- dwc2_core_init(hsotg, false);
- dwc2_enable_global_interrupts(hsotg);
- dwc2_hsotg_core_init_disconnected(hsotg, false);
- dwc2_hsotg_core_connect(hsotg);
- } else {
- hsotg->op_state = OTG_STATE_A_HOST;
-
- /* Initialize the Core for Host mode */
- dwc2_core_init(hsotg, false);
- dwc2_enable_global_interrupts(hsotg);
- dwc2_hcd_start(hsotg);
- }
- }
-
- if ((gpwrdn & GPWRDN_LNSTSCHG) &&
- (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
+ /*
+ * Call disconnect detect function to exit from
+ * hibernation
+ */
+ dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+ } else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
+ (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
if (hsotg->hw_params.hibernation &&
hsotg->hibernated) {
@@ -749,24 +764,21 @@ static void dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
dwc2_exit_hibernation(hsotg, 1, 0, 1);
}
}
- }
- if ((gpwrdn & GPWRDN_RST_DET) && (gpwrdn & GPWRDN_RST_DET_MSK)) {
+ } else if ((gpwrdn & GPWRDN_RST_DET) &&
+ (gpwrdn & GPWRDN_RST_DET_MSK)) {
dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
if (!linestate && (gpwrdn & GPWRDN_BSESSVLD))
dwc2_exit_hibernation(hsotg, 0, 1, 0);
- }
- if ((gpwrdn & GPWRDN_STS_CHGINT) &&
- (gpwrdn & GPWRDN_STS_CHGINT_MSK) && linestate) {
+ } else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
+ (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
- if (hsotg->hw_params.hibernation &&
- hsotg->hibernated) {
- if (gpwrdn & GPWRDN_IDSTS) {
- dwc2_exit_hibernation(hsotg, 0, 0, 0);
- call_gadget(hsotg, resume);
- } else {
- dwc2_exit_hibernation(hsotg, 1, 0, 1);
- }
- }
+ /*
+ * As GPWRDN_STS_CHGINT exit from hibernation flow is
+ * the same as in GPWRDN_DISCONN_DET flow. Call
+ * disconnect detect helper function to exit from
+ * hibernation.
+ */
+ dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 335/677] ttyprintk: Add TTY hangup callback.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (333 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 334/677] usb: dwc2: Fix hibernation between host and device modes Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 336/677] serial: omap: dont disable rs485 if rts gpio is missing Greg Kroah-Hartman
` (348 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, syzbot, Tetsuo Handa, Sasha Levin
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
[ Upstream commit c0070e1e60270f6a1e09442a9ab2335f3eaeaad2 ]
syzbot is reporting hung task due to flood of
tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__,
port->count);
message [1], for ioctl(TIOCVHANGUP) prevents tty_port_close() from
decrementing port->count due to tty_hung_up_p() == true.
----------
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
int i;
int fd[10];
for (i = 0; i < 10; i++)
fd[i] = open("/dev/ttyprintk", O_WRONLY);
ioctl(fd[0], TIOCVHANGUP);
for (i = 0; i < 10; i++)
close(fd[i]);
close(open("/dev/ttyprintk", O_WRONLY));
return 0;
}
----------
When TTY hangup happens, port->count needs to be reset via
"struct tty_operations"->hangup callback.
[1] https://syzkaller.appspot.com/bug?id=39ea6caa479af471183997376dc7e90bc7d64a6a
Reported-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+3ed715090790806d8b18@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+43e93968b964e369db0b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 24b4b67d17c308aa ("add ttyprintk driver")
Link: https://lore.kernel.org/r/17e0652d-89b7-c8c0-fb53-e7566ac9add4@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/ttyprintk.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 6a0059e508e3..93f5d11c830b 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -158,12 +158,23 @@ static int tpk_ioctl(struct tty_struct *tty,
return 0;
}
+/*
+ * TTY operations hangup function.
+ */
+static void tpk_hangup(struct tty_struct *tty)
+{
+ struct ttyprintk_port *tpkp = tty->driver_data;
+
+ tty_port_hangup(&tpkp->port);
+}
+
static const struct tty_operations ttyprintk_ops = {
.open = tpk_open,
.close = tpk_close,
.write = tpk_write,
.write_room = tpk_write_room,
.ioctl = tpk_ioctl,
+ .hangup = tpk_hangup,
};
static const struct tty_port_operations null_ops = { };
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 336/677] serial: omap: dont disable rs485 if rts gpio is missing
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (334 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 335/677] ttyprintk: Add TTY hangup callback Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 337/677] serial: omap: fix rs485 half-duplex filtering Greg Kroah-Hartman
` (347 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dario Binacchi, Sasha Levin
From: Dario Binacchi <dariobin@libero.it>
[ Upstream commit 45f6b6db53c80787b79044629b062dfcf2da71ec ]
There are rs485 transceivers (e.g. MAX13487E/MAX13488E) which
automatically disable or enable the driver and receiver to keep the bus
in the correct state.
In these cases we don't need a GPIO for flow control.
Fixes: 4a0ac0f55b18 ("OMAP: add RS485 support")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Link: https://lore.kernel.org/r/20210415210945.25863-1-dariobin@libero.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/omap-serial.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 76b94d0ff586..1583e93b2202 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -302,7 +302,8 @@ static void serial_omap_stop_tx(struct uart_port *port)
serial_out(up, UART_OMAP_SCR, up->scr);
res = (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) ?
1 : 0;
- if (gpiod_get_value(up->rts_gpiod) != res) {
+ if (up->rts_gpiod &&
+ gpiod_get_value(up->rts_gpiod) != res) {
if (port->rs485.delay_rts_after_send > 0)
mdelay(
port->rs485.delay_rts_after_send);
@@ -411,7 +412,7 @@ static void serial_omap_start_tx(struct uart_port *port)
/* if rts not already enabled */
res = (port->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
- if (gpiod_get_value(up->rts_gpiod) != res) {
+ if (up->rts_gpiod && gpiod_get_value(up->rts_gpiod) != res) {
gpiod_set_value(up->rts_gpiod, res);
if (port->rs485.delay_rts_before_send > 0)
mdelay(port->rs485.delay_rts_before_send);
@@ -1407,18 +1408,13 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
/* store new config */
port->rs485 = *rs485;
- /*
- * Just as a precaution, only allow rs485
- * to be enabled if the gpio pin is valid
- */
if (up->rts_gpiod) {
/* enable / disable rts */
val = (port->rs485.flags & SER_RS485_ENABLED) ?
SER_RS485_RTS_AFTER_SEND : SER_RS485_RTS_ON_SEND;
val = (port->rs485.flags & val) ? 1 : 0;
gpiod_set_value(up->rts_gpiod, val);
- } else
- port->rs485.flags &= ~SER_RS485_ENABLED;
+ }
/* Enable interrupts */
up->ier = mode;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 337/677] serial: omap: fix rs485 half-duplex filtering
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (335 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 336/677] serial: omap: dont disable rs485 if rts gpio is missing Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 338/677] spi: tools: make a symbolic link to the header file spi.h Greg Kroah-Hartman
` (346 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dario Binacchi, Sasha Levin
From: Dario Binacchi <dariobin@libero.it>
[ Upstream commit e2a5e8448e7393e96ccde346c68764b40a52cc10 ]
Data received during half-duplex transmission must be filtered.
If the target device responds quickly, emptying the FIFO at the end of
the transmission can erase not only the echo characters but also part of
the response message.
By keeping the receive interrupt enabled even during transmission, it
allows you to filter each echo character and only in a number equal to
those transmitted.
The issue was generated by a target device that started responding
240us later having received a request in communication at 115200bps.
Sometimes, some messages received by the target were missing some of the
first bytes.
Fixes: 3a13884abea0 ("tty/serial: omap: empty the RX FIFO at the end of half-duplex TX")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Link: https://lore.kernel.org/r/20210418094705.27014-1-dariobin@libero.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/omap-serial.c | 39 ++++++++++++++++++++------------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 1583e93b2202..84e8158088cd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -159,6 +159,8 @@ struct uart_omap_port {
u32 calc_latency;
struct work_struct qos_work;
bool is_suspending;
+
+ unsigned int rs485_tx_filter_count;
};
#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
@@ -329,19 +331,6 @@ static void serial_omap_stop_tx(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
- /*
- * Empty the RX FIFO, we are not interested in anything
- * received during the half-duplex transmission.
- */
- serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR);
- /* Re-enable RX interrupts */
- up->ier |= UART_IER_RLSI | UART_IER_RDI;
- up->port.read_status_mask |= UART_LSR_DR;
- serial_out(up, UART_IER, up->ier);
- }
-
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
@@ -367,6 +356,10 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
serial_out(up, UART_TX, up->port.x_char);
up->port.icount.tx++;
up->port.x_char = 0;
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ up->rs485_tx_filter_count++;
+
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
@@ -378,6 +371,10 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
up->port.icount.tx++;
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ up->rs485_tx_filter_count++;
+
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
@@ -421,7 +418,7 @@ static void serial_omap_start_tx(struct uart_port *port)
if ((port->rs485.flags & SER_RS485_ENABLED) &&
!(port->rs485.flags & SER_RS485_RX_DURING_TX))
- serial_omap_stop_rx(port);
+ up->rs485_tx_filter_count = 0;
serial_omap_enable_ier_thri(up);
pm_runtime_mark_last_busy(up->dev);
@@ -492,8 +489,13 @@ static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
* Read one data character out to avoid stalling the receiver according
* to the table 23-246 of the omap4 TRM.
*/
- if (likely(lsr & UART_LSR_DR))
+ if (likely(lsr & UART_LSR_DR)) {
serial_in(up, UART_RX);
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) &&
+ up->rs485_tx_filter_count)
+ up->rs485_tx_filter_count--;
+ }
up->port.icount.rx++;
flag = TTY_NORMAL;
@@ -544,6 +546,13 @@ static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr)
return;
ch = serial_in(up, UART_RX);
+ if ((up->port.rs485.flags & SER_RS485_ENABLED) &&
+ !(up->port.rs485.flags & SER_RS485_RX_DURING_TX) &&
+ up->rs485_tx_filter_count) {
+ up->rs485_tx_filter_count--;
+ return;
+ }
+
flag = TTY_NORMAL;
up->port.icount.rx++;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 338/677] spi: tools: make a symbolic link to the header file spi.h
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (336 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 337/677] serial: omap: fix rs485 half-duplex filtering Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 339/677] xen-blkback: fix compatibility bug with single page rings Greg Kroah-Hartman
` (345 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Mark Brown, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit bc2e9578baed90f36abe6bb922b9598a327b0555 ]
The header file spi.h in include/uapi/linux/spi is needed for spidev.h,
so we also need make a symbolic link to it to eliminate the error message
as below:
In file included from spidev_test.c:24:
include/linux/spi/spidev.h:28:10: fatal error: linux/spi/spi.h: No such file or directory
28 | #include <linux/spi/spi.h>
| ^~~~~~~~~~~~~~~~~
compilation terminated.
Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210422102604.3034217-1-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/spi/Makefile | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/spi/Makefile b/tools/spi/Makefile
index ada881afb489..0aa6dbd31fb8 100644
--- a/tools/spi/Makefile
+++ b/tools/spi/Makefile
@@ -25,11 +25,12 @@ include $(srctree)/tools/build/Makefile.include
#
# We need the following to be outside of kernel tree
#
-$(OUTPUT)include/linux/spi/spidev.h: ../../include/uapi/linux/spi/spidev.h
+$(OUTPUT)include/linux/spi: ../../include/uapi/linux/spi
mkdir -p $(OUTPUT)include/linux/spi 2>&1 || true
ln -sf $(CURDIR)/../../include/uapi/linux/spi/spidev.h $@
+ ln -sf $(CURDIR)/../../include/uapi/linux/spi/spi.h $@
-prepare: $(OUTPUT)include/linux/spi/spidev.h
+prepare: $(OUTPUT)include/linux/spi
#
# spidev_test
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 339/677] xen-blkback: fix compatibility bug with single page rings
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (337 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 338/677] spi: tools: make a symbolic link to the header file spi.h Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 340/677] soc: aspeed: fix a ternary sign expansion bug Greg Kroah-Hartman
` (344 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Durrant, Dongli Zhang,
Roger Pau Monné,
Juergen Gross, Sasha Levin
From: Paul Durrant <pdurrant@amazon.com>
[ Upstream commit d75e7f63b7c95c527cde42efb5d410d7f961498f ]
Prior to commit 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid
inconsistent xenstore 'ring-page-order' set by malicious blkfront"), the
behaviour of xen-blkback when connecting to a frontend was:
- read 'ring-page-order'
- if not present then expect a single page ring specified by 'ring-ref'
- else expect a ring specified by 'ring-refX' where X is between 0 and
1 << ring-page-order
This was correct behaviour, but was broken by the afforementioned commit to
become:
- read 'ring-page-order'
- if not present then expect a single page ring (i.e. ring-page-order = 0)
- expect a ring specified by 'ring-refX' where X is between 0 and
1 << ring-page-order
- if that didn't work then see if there's a single page ring specified by
'ring-ref'
This incorrect behaviour works most of the time but fails when a frontend
that sets 'ring-page-order' is unloaded and replaced by one that does not
because, instead of reading 'ring-ref', xen-blkback will read the stale
'ring-ref0' left around by the previous frontend will try to map the wrong
grant reference.
This patch restores the original behaviour.
Fixes: 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210202175659.18452-1-paul@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/xen-blkback/common.h | 1 +
drivers/block/xen-blkback/xenbus.c | 38 +++++++++++++-----------------
2 files changed, 17 insertions(+), 22 deletions(-)
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index b0c71d3a81a0..bda5c815e441 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -313,6 +313,7 @@ struct xen_blkif {
struct work_struct free_work;
unsigned int nr_ring_pages;
+ bool multi_ref;
/* All rings for this device. */
struct xen_blkif_ring *rings;
unsigned int nr_rings;
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index c2aaf690352c..125b22205d38 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -998,14 +998,17 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
for (i = 0; i < nr_grefs; i++) {
char ring_ref_name[RINGREF_NAME_LEN];
- snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
+ if (blkif->multi_ref)
+ snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
+ else {
+ WARN_ON(i != 0);
+ snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref");
+ }
+
err = xenbus_scanf(XBT_NIL, dir, ring_ref_name,
"%u", &ring_ref[i]);
if (err != 1) {
- if (nr_grefs == 1)
- break;
-
err = -EINVAL;
xenbus_dev_fatal(dev, err, "reading %s/%s",
dir, ring_ref_name);
@@ -1013,18 +1016,6 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
}
}
- if (err != 1) {
- WARN_ON(nr_grefs != 1);
-
- err = xenbus_scanf(XBT_NIL, dir, "ring-ref", "%u",
- &ring_ref[0]);
- if (err != 1) {
- err = -EINVAL;
- xenbus_dev_fatal(dev, err, "reading %s/ring-ref", dir);
- return err;
- }
- }
-
err = -ENOMEM;
for (i = 0; i < nr_grefs * XEN_BLKIF_REQS_PER_PAGE; i++) {
req = kzalloc(sizeof(*req), GFP_KERNEL);
@@ -1129,10 +1120,15 @@ static int connect_ring(struct backend_info *be)
blkif->nr_rings, blkif->blk_protocol, protocol,
blkif->vbd.feature_gnt_persistent ? "persistent grants" : "");
- ring_page_order = xenbus_read_unsigned(dev->otherend,
- "ring-page-order", 0);
-
- if (ring_page_order > xen_blkif_max_ring_order) {
+ err = xenbus_scanf(XBT_NIL, dev->otherend, "ring-page-order", "%u",
+ &ring_page_order);
+ if (err != 1) {
+ blkif->nr_ring_pages = 1;
+ blkif->multi_ref = false;
+ } else if (ring_page_order <= xen_blkif_max_ring_order) {
+ blkif->nr_ring_pages = 1 << ring_page_order;
+ blkif->multi_ref = true;
+ } else {
err = -EINVAL;
xenbus_dev_fatal(dev, err,
"requested ring page order %d exceed max:%d",
@@ -1141,8 +1137,6 @@ static int connect_ring(struct backend_info *be)
return err;
}
- blkif->nr_ring_pages = 1 << ring_page_order;
-
if (blkif->nr_rings == 1)
return read_per_ring_refs(&blkif->rings[0], dev->otherend);
else {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 340/677] soc: aspeed: fix a ternary sign expansion bug
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (338 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 339/677] xen-blkback: fix compatibility bug with single page rings Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 341/677] drm/tilcdc: send vblank event when disabling crtc Greg Kroah-Hartman
` (343 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Joel Stanley,
Patrick Venture, Arnd Bergmann, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 5ffa828534036348fa90fb3079ccc0972d202c4a ]
The intent here was to return negative error codes but it actually
returns positive values. The problem is that type promotion with
ternary operations is quite complicated.
"ret" is an int. "copied" is a u32. And the snoop_file_read() function
returns long. What happens is that "ret" is cast to u32 and becomes
positive then it's cast to long and it's still positive.
Fix this by removing the ternary so that "ret" is type promoted directly
to long.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Venture <venture@google.com>
Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda
Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/aspeed/aspeed-lpc-snoop.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
index 20acac6342ef..5828f94b8a7d 100644
--- a/drivers/soc/aspeed/aspeed-lpc-snoop.c
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -95,8 +95,10 @@ static ssize_t snoop_file_read(struct file *file, char __user *buffer,
return -EINTR;
}
ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static __poll_t snoop_file_poll(struct file *file,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 341/677] drm/tilcdc: send vblank event when disabling crtc
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (339 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 340/677] soc: aspeed: fix a ternary sign expansion bug Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 342/677] drm/stm: Fix bus_flags handling Greg Kroah-Hartman
` (342 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Jyri Sarha, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit f1a75f4dd8edf272b6b7cdccf6ba6254ec9d15fa ]
When run xrandr to change resolution on Beaglebone Black board, it will
print the error information:
root@beaglebone:~# xrandr -display :0 --output HDMI-1 --mode 720x400
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] commit wait timed out
tilcdc 4830e000.lcdc: already pending page flip!
This is because there is operation sequence as below:
drm_atomic_connector_commit_dpms(mode is DRM_MODE_DPMS_OFF):
...
drm_atomic_helper_setup_commit <- init_completion(commit_A->flip_done)
drm_atomic_helper_commit_tail
tilcdc_crtc_atomic_disable
tilcdc_plane_atomic_update <- drm_crtc_send_vblank_event in tilcdc_crtc_irq
is skipped since tilcdc_crtc->enabled is 0
tilcdc_crtc_atomic_flush <- drm_crtc_send_vblank_event is skipped since
crtc->state->event is set to be NULL in
tilcdc_plane_atomic_update
drm_mode_setcrtc:
...
drm_atomic_helper_setup_commit <- init_completion(commit_B->flip_done)
drm_atomic_helper_wait_for_dependencies
drm_crtc_commit_wait <- wait for commit_A->flip_done completing
Just as shown above, the steps which could complete commit_A->flip_done
are all skipped and commit_A->flip_done will never be completed. This will
result a time-out ERROR when drm_crtc_commit_wait check the commit_A->flip_done.
So add drm_crtc_send_vblank_event in tilcdc_crtc_atomic_disable to
complete commit_A->flip_done.
Fixes: cb345decb4d2 ("drm/tilcdc: Use standard drm_atomic_helper_commit")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209082415.382602-1-quanyang.wang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 30213708fc99..d99afd19ca08 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -515,6 +515,15 @@ static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
drm_crtc_vblank_off(crtc);
+ spin_lock_irq(&crtc->dev->event_lock);
+
+ if (crtc->state->event) {
+ drm_crtc_send_vblank_event(crtc, crtc->state->event);
+ crtc->state->event = NULL;
+ }
+
+ spin_unlock_irq(&crtc->dev->event_lock);
+
tilcdc_crtc_disable_irqs(dev);
pm_runtime_put_sync(dev->dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 342/677] drm/stm: Fix bus_flags handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (340 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 341/677] drm/tilcdc: send vblank event when disabling crtc Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 343/677] drm/amd/display: Fix off by one in hdmi_14_process_transaction() Greg Kroah-Hartman
` (341 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel, dri-devel
Cc: Greg Kroah-Hartman, stable, Marek Vasut, Yannick Fertre,
Alexandre Torgue, Antonio Borneo, Benjamin Gaignard,
Maxime Coquelin, Philippe Cornu, Sam Ravnborg, Vincent Abriou,
linux-arm-kernel, linux-stm32, Yannick Fertre, Philippe Cornu,
Sasha Levin
From: Marek Vasut <marex@denx.de>
[ Upstream commit 99e360442f223dd40fc23ae07c7a263836fd27e6 ]
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW
or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no
matter what polarity the next bridge or display might require, these flags
are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set
and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and
DISPLAY_FLAGS_DE_HIGH were always set.
The fix for this problem is taken almost verbatim from MXSFB driver. In
case there is a bridge attached to the LTDC, the bridge might have extra
polarity requirements, so extract bus_flags from the bridge and use them
for LTDC configuration. Otherwise, extract bus_flags from the connector,
which is the display.
Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/stm/ltdc.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 7812094f93d6..6f3b523e16e8 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -525,13 +525,42 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct ltdc_device *ldev = crtc_to_ltdc(crtc);
struct drm_device *ddev = crtc->dev;
+ struct drm_connector_list_iter iter;
+ struct drm_connector *connector = NULL;
+ struct drm_encoder *encoder = NULL;
+ struct drm_bridge *bridge = NULL;
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct videomode vm;
u32 hsync, vsync, accum_hbp, accum_vbp, accum_act_w, accum_act_h;
u32 total_width, total_height;
+ u32 bus_flags = 0;
u32 val;
int ret;
+ /* get encoder from crtc */
+ drm_for_each_encoder(encoder, ddev)
+ if (encoder->crtc == crtc)
+ break;
+
+ if (encoder) {
+ /* get bridge from encoder */
+ list_for_each_entry(bridge, &encoder->bridge_chain, chain_node)
+ if (bridge->encoder == encoder)
+ break;
+
+ /* Get the connector from encoder */
+ drm_connector_list_iter_begin(ddev, &iter);
+ drm_for_each_connector_iter(connector, &iter)
+ if (connector->encoder == encoder)
+ break;
+ drm_connector_list_iter_end(&iter);
+ }
+
+ if (bridge && bridge->timings)
+ bus_flags = bridge->timings->input_bus_flags;
+ else if (connector)
+ bus_flags = connector->display_info.bus_flags;
+
if (!pm_runtime_active(ddev->dev)) {
ret = pm_runtime_get_sync(ddev->dev);
if (ret) {
@@ -567,10 +596,10 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
val |= GCR_VSPOL;
- if (vm.flags & DISPLAY_FLAGS_DE_LOW)
+ if (bus_flags & DRM_BUS_FLAG_DE_LOW)
val |= GCR_DEPOL;
- if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
val |= GCR_PCPOL;
reg_update_bits(ldev->regs, LTDC_GCR,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 343/677] drm/amd/display: Fix off by one in hdmi_14_process_transaction()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (341 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 342/677] drm/stm: Fix bus_flags handling Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 344/677] drm/mcde/panel: Inverse misunderstood flag Greg Kroah-Hartman
` (340 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bhawanpreet Lakha, Dan Carpenter,
Alex Deucher, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 8e6fafd5a22e7a2eb216f5510db7aab54cc545c1 ]
The hdcp_i2c_offsets[] array did not have an entry for
HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one
read overflow. I added an entry and copied the 0x0 value for the offset
from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c.
I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX
entries. This doesn't change the code, but it's just a belt and
suspenders approach to try future proof the code.
Fixes: 4c283fdac08a ("drm/amd/display: Add HDCP module")
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c b/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
index 5e384a8a83dc..51855a2624cf 100644
--- a/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
+++ b/drivers/gpu/drm/amd/display/dc/hdcp/hdcp_msg.c
@@ -39,7 +39,7 @@
#define HDCP14_KSV_SIZE 5
#define HDCP14_MAX_KSV_FIFO_SIZE 127*HDCP14_KSV_SIZE
-static const bool hdcp_cmd_is_read[] = {
+static const bool hdcp_cmd_is_read[HDCP_MESSAGE_ID_MAX] = {
[HDCP_MESSAGE_ID_READ_BKSV] = true,
[HDCP_MESSAGE_ID_READ_RI_R0] = true,
[HDCP_MESSAGE_ID_READ_PJ] = true,
@@ -75,7 +75,7 @@ static const bool hdcp_cmd_is_read[] = {
[HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE] = false
};
-static const uint8_t hdcp_i2c_offsets[] = {
+static const uint8_t hdcp_i2c_offsets[HDCP_MESSAGE_ID_MAX] = {
[HDCP_MESSAGE_ID_READ_BKSV] = 0x0,
[HDCP_MESSAGE_ID_READ_RI_R0] = 0x8,
[HDCP_MESSAGE_ID_READ_PJ] = 0xA,
@@ -106,7 +106,8 @@ static const uint8_t hdcp_i2c_offsets[] = {
[HDCP_MESSAGE_ID_WRITE_REPEATER_AUTH_SEND_ACK] = 0x60,
[HDCP_MESSAGE_ID_WRITE_REPEATER_AUTH_STREAM_MANAGE] = 0x60,
[HDCP_MESSAGE_ID_READ_REPEATER_AUTH_STREAM_READY] = 0x80,
- [HDCP_MESSAGE_ID_READ_RXSTATUS] = 0x70
+ [HDCP_MESSAGE_ID_READ_RXSTATUS] = 0x70,
+ [HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE] = 0x0,
};
struct protection_properties {
@@ -184,7 +185,7 @@ static const struct protection_properties hdmi_14_protection = {
.process_transaction = hdmi_14_process_transaction
};
-static const uint32_t hdcp_dpcd_addrs[] = {
+static const uint32_t hdcp_dpcd_addrs[HDCP_MESSAGE_ID_MAX] = {
[HDCP_MESSAGE_ID_READ_BKSV] = 0x68000,
[HDCP_MESSAGE_ID_READ_RI_R0] = 0x68005,
[HDCP_MESSAGE_ID_READ_PJ] = 0xFFFFFFFF,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 344/677] drm/mcde/panel: Inverse misunderstood flag
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (342 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 343/677] drm/amd/display: Fix off by one in hdmi_14_process_transaction() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 345/677] scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb() Greg Kroah-Hartman
` (339 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Boichat, Linus Walleij, Sasha Levin
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit d0c5ac04e7feedbc069f26f4dcbf35b521ae7fc5 ]
A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to
MIPI_DSI_MODE_NO_EOT_PACKET brought to light the
misunderstanding in the current MCDE driver and all
its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET
would mean "use EOT packet" when in fact it means the
reverse.
Fix it up by implementing the flag right in the MCDE
DSI driver and remove the flag from panels that actually
want the EOT packet.
Suggested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels")
Fixes: ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel")
Fixes: 435e06c06cb2 ("drm/panel: s6e63m0: Add DSI transport")
Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel")
Link: https://patchwork.freedesktop.org/patch/msgid/20210304004138.1785057-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mcde/mcde_dsi.c | 2 +-
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 3 +--
drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 4 +---
drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c | 1 -
drivers/gpu/drm/panel/panel-sony-acx424akp.c | 3 +--
5 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c
index 2314c8122992..b3fd3501c412 100644
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -760,7 +760,7 @@ static void mcde_dsi_start(struct mcde_dsi *d)
DSI_MCTL_MAIN_DATA_CTL_BTA_EN |
DSI_MCTL_MAIN_DATA_CTL_READ_EN |
DSI_MCTL_MAIN_DATA_CTL_REG_TE_EN;
- if (d->mdsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET)
+ if (!(d->mdsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
val |= DSI_MCTL_MAIN_DATA_CTL_HOST_EOT_GEN;
writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL);
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index b9a0e56f33e2..ef70140c5b09 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -898,8 +898,7 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
*/
dsi->hs_rate = 349440000;
dsi->lp_rate = 9600000;
- dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
- MIPI_DSI_MODE_EOT_PACKET;
+ dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
/*
* Every new incarnation of this display must have a unique
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
index 4aac0d1573dd..70560cac53a9 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
@@ -184,9 +184,7 @@ static int s6d16d0_probe(struct mipi_dsi_device *dsi)
* As we only send commands we do not need to be continuously
* clocked.
*/
- dsi->mode_flags =
- MIPI_DSI_CLOCK_NON_CONTINUOUS |
- MIPI_DSI_MODE_EOT_PACKET;
+ dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
s6->supply = devm_regulator_get(dev, "vdd1");
if (IS_ERR(s6->supply))
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
index eec74c10ddda..9c3563c61e8c 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
@@ -97,7 +97,6 @@ static int s6e63m0_dsi_probe(struct mipi_dsi_device *dsi)
dsi->hs_rate = 349440000;
dsi->lp_rate = 9600000;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
- MIPI_DSI_MODE_EOT_PACKET |
MIPI_DSI_MODE_VIDEO_BURST;
ret = s6e63m0_probe(dev, s6e63m0_dsi_dcs_read, s6e63m0_dsi_dcs_write,
diff --git a/drivers/gpu/drm/panel/panel-sony-acx424akp.c b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
index 065efae213f5..95659a4d15e9 100644
--- a/drivers/gpu/drm/panel/panel-sony-acx424akp.c
+++ b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
@@ -449,8 +449,7 @@ static int acx424akp_probe(struct mipi_dsi_device *dsi)
MIPI_DSI_MODE_VIDEO_BURST;
else
dsi->mode_flags =
- MIPI_DSI_CLOCK_NON_CONTINUOUS |
- MIPI_DSI_MODE_EOT_PACKET;
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
acx->supply = devm_regulator_get(dev, "vddi");
if (IS_ERR(acx->supply))
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 345/677] scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (343 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 344/677] drm/mcde/panel: Inverse misunderstood flag Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 346/677] sched/fair: Fix shift-out-of-bounds in load_balance() Greg Kroah-Hartman
` (338 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dick Kennedy, James Smart,
Martin K. Petersen, Sasha Levin
From: James Smart <jsmart2021@gmail.com>
[ Upstream commit 8dd1c125f7f838abad009b64bff5f0a11afe3cb6 ]
It is possible to call lpfc_issue_els_plogi() passing a did for which no
matching ndlp is found. A call is then made to lpfc_prep_els_iocb() with a
null pointer to a lpfc_nodelist structure resulting in a null pointer
dereference.
Fix by returning an error status if no valid ndlp is found. Fix up comments
regarding ndlp reference counting.
Link: https://lore.kernel.org/r/20210301171821.3427-10-jsmart2021@gmail.com
Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking")
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_els.c | 50 +++++++++++++++++-------------------
1 file changed, 24 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index fd18ac2acc13..3dd22da3153f 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -2044,13 +2044,12 @@ out_freeiocb:
* This routine issues a Port Login (PLOGI) command to a remote N_Port
* (with the @did) for a @vport. Before issuing a PLOGI to a remote N_Port,
* the ndlp with the remote N_Port DID must exist on the @vport's ndlp list.
- * This routine constructs the proper feilds of the PLOGI IOCB and invokes
+ * This routine constructs the proper fields of the PLOGI IOCB and invokes
* the lpfc_sli_issue_iocb() routine to send out PLOGI ELS command.
*
- * Note that, in lpfc_prep_els_iocb() routine, the reference count of ndlp
- * will be incremented by 1 for holding the ndlp and the reference to ndlp
- * will be stored into the context1 field of the IOCB for the completion
- * callback function to the PLOGI ELS command.
+ * Note that the ndlp reference count will be incremented by 1 for holding
+ * the ndlp and the reference to ndlp will be stored into the context1 field
+ * of the IOCB for the completion callback function to the PLOGI ELS command.
*
* Return code
* 0 - Successfully issued a plogi for @vport
@@ -2068,29 +2067,28 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
int ret;
ndlp = lpfc_findnode_did(vport, did);
+ if (!ndlp)
+ return 1;
- if (ndlp) {
- /* Defer the processing of the issue PLOGI until after the
- * outstanding UNREG_RPI mbox command completes, unless we
- * are going offline. This logic does not apply for Fabric DIDs
- */
- if ((ndlp->nlp_flag & NLP_UNREG_INP) &&
- ((ndlp->nlp_DID & Fabric_DID_MASK) != Fabric_DID_MASK) &&
- !(vport->fc_flag & FC_OFFLINE_MODE)) {
- lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
- "4110 Issue PLOGI x%x deferred "
- "on NPort x%x rpi x%x Data: x%px\n",
- ndlp->nlp_defer_did, ndlp->nlp_DID,
- ndlp->nlp_rpi, ndlp);
-
- /* We can only defer 1st PLOGI */
- if (ndlp->nlp_defer_did == NLP_EVT_NOTHING_PENDING)
- ndlp->nlp_defer_did = did;
- return 0;
- }
+ /* Defer the processing of the issue PLOGI until after the
+ * outstanding UNREG_RPI mbox command completes, unless we
+ * are going offline. This logic does not apply for Fabric DIDs
+ */
+ if ((ndlp->nlp_flag & NLP_UNREG_INP) &&
+ ((ndlp->nlp_DID & Fabric_DID_MASK) != Fabric_DID_MASK) &&
+ !(vport->fc_flag & FC_OFFLINE_MODE)) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
+ "4110 Issue PLOGI x%x deferred "
+ "on NPort x%x rpi x%x Data: x%px\n",
+ ndlp->nlp_defer_did, ndlp->nlp_DID,
+ ndlp->nlp_rpi, ndlp);
+
+ /* We can only defer 1st PLOGI */
+ if (ndlp->nlp_defer_did == NLP_EVT_NOTHING_PENDING)
+ ndlp->nlp_defer_did = did;
+ return 0;
}
- /* If ndlp is not NULL, we will bump the reference count on it */
cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
ELS_CMD_PLOGI);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 346/677] sched/fair: Fix shift-out-of-bounds in load_balance()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (344 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 345/677] scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 347/677] printk: limit second loop of syslog_print_all Greg Kroah-Hartman
` (337 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+d7581744d5fd27c9fbe1,
Valentin Schneider, Peter Zijlstra (Intel),
Ingo Molnar, Sasha Levin
From: Valentin Schneider <valentin.schneider@arm.com>
[ Upstream commit 39a2a6eb5c9b66ea7c8055026303b3aa681b49a5 ]
Syzbot reported a handful of occurrences where an sd->nr_balance_failed can
grow to much higher values than one would expect.
A successful load_balance() resets it to 0; a failed one increments
it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an
active balance, which will either set it to sd->cache_nice_tries+1 or reset
it to 0. However, in case the to-be-active-balanced task is not allowed to
run on env->dst_cpu, then the increment is done without any further
modification.
This could then be repeated ad nauseam, and would explain the absurdly high
values reported by syzbot (86, 149). VincentG noted there is value in
letting sd->cache_nice_tries grow, so the shift itself should be
fixed. That means preventing:
"""
If the value of the right operand is negative or is greater than or equal
to the width of the promoted left operand, the behavior is undefined.
"""
Thus we need to cap the shift exponent to
BITS_PER_TYPE(typeof(lefthand)) - 1.
I had a look around for other similar cases via coccinelle:
@expr@
position pos;
expression E1;
expression E2;
@@
(
E1 >> E2@pos
|
E1 >> E2@pos
)
@cst depends on expr@
position pos;
expression expr.E1;
constant cst;
@@
(
E1 >> cst@pos
|
E1 << cst@pos
)
@script:python depends on !cst@
pos << expr.pos;
exp << expr.E2;
@@
# Dirty hack to ignore constexpr
if exp.upper() != exp:
coccilib.report.print_report(pos[0], "Possible UB shift here")
The only other match in kernel/sched is rq_clock_thermal() which employs
sched_thermal_decay_shift, and that exponent is already capped to 10, so
that one is fine.
Fixes: 5a7f55590467 ("sched/fair: Relax constraint on task's load during load balance")
Reported-by: syzbot+d7581744d5fd27c9fbe1@syzkaller.appspotmail.com
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lore.kernel.org/r/000000000000ffac1205b9a2112f@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/fair.c | 3 +--
kernel/sched/sched.h | 7 +++++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 0eeeeeb66f33..b5ffe808b07b 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7780,8 +7780,7 @@ static int detach_tasks(struct lb_env *env)
* scheduler fails to find a good waiting task to
* migrate.
*/
-
- if ((load >> env->sd->nr_balance_failed) > env->imbalance)
+ if (shr_bound(load, env->sd->nr_balance_failed) > env->imbalance)
goto next;
env->imbalance -= load;
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 10a1522b1e30..e4e4f47cee6a 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -204,6 +204,13 @@ static inline void update_avg(u64 *avg, u64 sample)
*avg += diff / 8;
}
+/*
+ * Shifting a value by an exponent greater *or equal* to the size of said value
+ * is UB; cap at size-1.
+ */
+#define shr_bound(val, shift) \
+ (val >> min_t(typeof(shift), shift, BITS_PER_TYPE(typeof(val)) - 1))
+
/*
* !! For sched_setattr_nocheck() (kernel) only !!
*
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 347/677] printk: limit second loop of syslog_print_all
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (345 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 346/677] sched/fair: Fix shift-out-of-bounds in load_balance() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 348/677] afs: Fix updating of i_mode due to 3rd party change Greg Kroah-Hartman
` (336 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Ogness, Petr Mladek, Sasha Levin
From: John Ogness <john.ogness@linutronix.de>
[ Upstream commit bb07b16c44b2c6ddbafa44bb06454719002e828e ]
The second loop of syslog_print_all() subtracts lengths that were
added in the first loop. With commit b031a684bfd0 ("printk: remove
logbuf_lock writer-protection of ringbuffer") it is possible that
records are (over)written during syslog_print_all(). This allows the
possibility of the second loop subtracting lengths that were never
added in the first loop.
This situation can result in syslog_print_all() filling the buffer
starting from a later record, even though there may have been room
to fit the earlier record(s) as well.
Fixes: b031a684bfd0 ("printk: remove logbuf_lock writer-protection of ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-4-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/printk/printk.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 575a34b88936..77ae2704e979 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1494,6 +1494,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
struct printk_info info;
unsigned int line_count;
struct printk_record r;
+ u64 max_seq;
char *text;
int len = 0;
u64 seq;
@@ -1512,9 +1513,15 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
prb_for_each_info(clear_seq, prb, seq, &info, &line_count)
len += get_record_print_text_size(&info, line_count, true, time);
+ /*
+ * Set an upper bound for the next loop to avoid subtracting lengths
+ * that were never added.
+ */
+ max_seq = seq;
+
/* move first record forward until length fits into the buffer */
prb_for_each_info(clear_seq, prb, seq, &info, &line_count) {
- if (len <= size)
+ if (len <= size || info.seq >= max_seq)
break;
len -= get_record_print_text_size(&info, line_count, true, time);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 348/677] afs: Fix updating of i_mode due to 3rd party change
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (346 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 347/677] printk: limit second loop of syslog_print_all Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 349/677] rcu: Remove spurious instrumentation_end() in rcu_nmi_enter() Greg Kroah-Hartman
` (335 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Al Viro, David Howells, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit 6e1eb04a87f954eb06a89ee6034c166351dfff6e ]
Fix afs_apply_status() to mask off the irrelevant bits from status->mode
when OR'ing them into i_mode. This can happen when a 3rd party chmod
occurs.
Also fix afs_inode_init_from_status() to mask off the mode bits when
initialising i_mode.
Fixes: 260a980317da ("[AFS]: Add "directory write" support.")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/afs/inode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 12be88716e4c..5a70c09f5325 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -102,13 +102,13 @@ static int afs_inode_init_from_status(struct afs_operation *op,
switch (status->type) {
case AFS_FTYPE_FILE:
- inode->i_mode = S_IFREG | status->mode;
+ inode->i_mode = S_IFREG | (status->mode & S_IALLUGO);
inode->i_op = &afs_file_inode_operations;
inode->i_fop = &afs_file_operations;
inode->i_mapping->a_ops = &afs_fs_aops;
break;
case AFS_FTYPE_DIR:
- inode->i_mode = S_IFDIR | status->mode;
+ inode->i_mode = S_IFDIR | (status->mode & S_IALLUGO);
inode->i_op = &afs_dir_inode_operations;
inode->i_fop = &afs_dir_file_operations;
inode->i_mapping->a_ops = &afs_dir_aops;
@@ -198,7 +198,7 @@ static void afs_apply_status(struct afs_operation *op,
if (status->mode != vnode->status.mode) {
mode = inode->i_mode;
mode &= ~S_IALLUGO;
- mode |= status->mode;
+ mode |= status->mode & S_IALLUGO;
WRITE_ONCE(inode->i_mode, mode);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 349/677] rcu: Remove spurious instrumentation_end() in rcu_nmi_enter()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (347 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 348/677] afs: Fix updating of i_mode due to 3rd party change Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 350/677] media: mtk: fix mtk-smi dependency Greg Kroah-Hartman
` (334 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhouyi Zhou, Paul E. McKenney, Sasha Levin
From: Zhouyi Zhou <zhouzhouyi@gmail.com>
[ Upstream commit 6494ccb93271bee596a12db32ff44867d5be2321 ]
In rcu_nmi_enter(), there is an erroneous instrumentation_end() in the
second branch of the "if" statement. Oddly enough, "objtool check -f
vmlinux.o" fails to complain because it is unable to correctly cover
all cases. Instead, objtool visits the third branch first, which marks
following trace_rcu_dyntick() as visited. This commit therefore removes
the spurious instrumentation_end().
Fixes: 04b25a495bd6 ("rcu: Mark rcu_nmi_enter() call to rcu_cleanup_after_idle() noinstr")
Reported-by Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/tree.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 2a739c5fcca5..7356764e49a0 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1077,7 +1077,6 @@ noinstr void rcu_nmi_enter(void)
} else if (!in_nmi()) {
instrumentation_begin();
rcu_irq_enter_check_tick();
- instrumentation_end();
} else {
instrumentation_begin();
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 350/677] media: mtk: fix mtk-smi dependency
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (348 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 349/677] rcu: Remove spurious instrumentation_end() in rcu_nmi_enter() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 351/677] media: vivid: fix assignment of dev->fbuf_out_flags Greg Kroah-Hartman
` (333 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 4fade8329ab2be2b902fce8db3625fd12234b873 ]
The mtk-smi driver can now be built as a loadable module, but
this leads to a build time regression when the drivers that
depend on it are built-in:
aarch64-linux-ld: drivers/media/platform/mtk-mdp/mtk_mdp_comp.o: in function `mtk_mdp_comp_clock_on':
mtk_mdp_comp.c:(.text.mtk_mdp_comp_clock_on+0x54): undefined reference to `mtk_smi_larb_get'
aarch64-linux-ld: drivers/media/platform/mtk-mdp/mtk_mdp_comp.o: in function `mtk_mdp_comp_clock_off':
mtk_mdp_comp.c:(.text.mtk_mdp_comp_clock_off+0x12c): undefined reference to `mtk_smi_larb_put'
Add a dependency on the interface, but keep allowing
compile-testing without that driver, as it was originally
intended.
Fixes: 50fc8d9232cd ("memory: mtk-smi: Allow building as module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index fd1831e97b22..1ddb5d6354cf 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -244,6 +244,7 @@ config VIDEO_MEDIATEK_JPEG
depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
@@ -271,6 +272,7 @@ config VIDEO_MEDIATEK_MDP
depends on MTK_IOMMU || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
@@ -291,6 +293,7 @@ config VIDEO_MEDIATEK_VCODEC
# our dependencies, to avoid missing symbols during link.
depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU
depends on MTK_SCP || !MTK_SCP
+ depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 351/677] media: vivid: fix assignment of dev->fbuf_out_flags
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (349 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 350/677] media: mtk: fix mtk-smi dependency Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 352/677] media: saa7134: use sg_dma_len when building pgtable Greg Kroah-Hartman
` (332 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 5cde22fcc7271812a7944c47b40100df15908358 ]
Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise
mask and the following statement should be bit-wise or'ing in the new flag
bits but instead is making a direct assignment. Fix this by using the |=
operator rather than an assignment.
Addresses-Coverity: ("Unused value")
Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/test-drivers/vivid/vivid-vid-out.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-out.c b/drivers/media/test-drivers/vivid/vivid-vid-out.c
index ac1e981e8342..9f731f085179 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-out.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-out.c
@@ -1021,7 +1021,7 @@ int vivid_vid_out_s_fbuf(struct file *file, void *fh,
return -EINVAL;
}
dev->fbuf_out_flags &= ~(chroma_flags | alpha_flags);
- dev->fbuf_out_flags = a->flags & (chroma_flags | alpha_flags);
+ dev->fbuf_out_flags |= a->flags & (chroma_flags | alpha_flags);
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 352/677] media: saa7134: use sg_dma_len when building pgtable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (350 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 351/677] media: vivid: fix assignment of dev->fbuf_out_flags Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 353/677] media: saa7146: " Greg Kroah-Hartman
` (331 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tasos Sahanidis, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Tasos Sahanidis <tasos@tasossah.com>
[ Upstream commit 4e1cb753c04d74e06d7ca826ea0bcb02526af03e ]
The new AMD IOMMU DMA implementation concatenates sglist entries under
certain conditions, and because saa7134 accessed the length member
directly, it did not support this scenario.
This fixes IO_PAGE_FAULTs and choppy DMA audio by using the
sg_dma_len macro.
Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/saa7134/saa7134-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
index 391572a6ec76..efb757d5168a 100644
--- a/drivers/media/pci/saa7134/saa7134-core.c
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -243,7 +243,7 @@ int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt,
ptr = pt->cpu + startpage;
for (i = 0; i < length; i++, list = sg_next(list)) {
- for (p = 0; p * 4096 < list->length; p++, ptr++)
+ for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr++)
*ptr = cpu_to_le32(sg_dma_address(list) +
list->offset + p * 4096);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 353/677] media: saa7146: use sg_dma_len when building pgtable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (351 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 352/677] media: saa7134: use sg_dma_len when building pgtable Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 354/677] media: omap4iss: return error code when omap4iss_get() failed Greg Kroah-Hartman
` (330 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tasos Sahanidis, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Tasos Sahanidis <tasos@tasossah.com>
[ Upstream commit e56429b09d5e0802b86f84ec7c24025886c9f88b ]
The new AMD IOMMU DMA implementation concatenates sglist entries under
certain conditions, and because saa7146 accessed the length member
directly, it did not support this scenario.
This fixes IO_PAGE_FAULTs by using the sg_dma_len macro.
Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api")
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/common/saa7146/saa7146_core.c | 2 +-
drivers/media/common/saa7146/saa7146_video.c | 3 +--
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/media/common/saa7146/saa7146_core.c b/drivers/media/common/saa7146/saa7146_core.c
index f2d13b71416c..e50fa0ff7c5d 100644
--- a/drivers/media/common/saa7146/saa7146_core.c
+++ b/drivers/media/common/saa7146/saa7146_core.c
@@ -253,7 +253,7 @@ int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt
i, sg_dma_address(list), sg_dma_len(list),
list->offset);
*/
- for (p = 0; p * 4096 < list->length; p++, ptr++) {
+ for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr++) {
*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
nr_pages++;
}
diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
index 7b8795eca589..66215d9106a4 100644
--- a/drivers/media/common/saa7146/saa7146_video.c
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -247,9 +247,8 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
/* walk all pages, copy all page addresses to ptr1 */
for (i = 0; i < length; i++, list++) {
- for (p = 0; p * 4096 < list->length; p++, ptr1++) {
+ for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr1++)
*ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset);
- }
}
/*
ptr1 = pt1->cpu;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 354/677] media: omap4iss: return error code when omap4iss_get() failed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (352 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 353/677] media: saa7146: " Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 355/677] media: rkisp1: rsz: crash fix when setting src format Greg Kroah-Hartman
` (329 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 8938c48fa25b491842ece9eb38f0bea0fcbaca44 ]
If omap4iss_get() failed, it need return error code in iss_probe().
Fixes: 59f0ad807681 ("[media] v4l: omap4iss: Add support for OMAP4...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/omap4iss/iss.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c
index dae9073e7d3c..085397045b36 100644
--- a/drivers/staging/media/omap4iss/iss.c
+++ b/drivers/staging/media/omap4iss/iss.c
@@ -1236,8 +1236,10 @@ static int iss_probe(struct platform_device *pdev)
if (ret < 0)
goto error;
- if (!omap4iss_get(iss))
+ if (!omap4iss_get(iss)) {
+ ret = -EINVAL;
goto error;
+ }
ret = iss_reset(iss);
if (ret < 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 355/677] media: rkisp1: rsz: crash fix when setting src format
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (353 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 354/677] media: omap4iss: return error code when omap4iss_get() failed Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 356/677] media: aspeed: fix clock handling logic Greg Kroah-Hartman
` (328 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dafna Hirschfeld, Helen Koike,
Sebastian Fricke, Hans Verkuil, Mauro Carvalho Chehab,
Sasha Levin
From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
[ Upstream commit cbe8373ca7e7cbb4b263b6bf222ccc19f5e119d2 ]
When setting the source media bus code in the resizer,
we first check that the current media bus code in the
source is yuv encoded format. This is done by
retrieving the data from the formats list of the isp
entity. This cause a crash when the media bus code on the
source is YUYV8_1_5X8 which is not supported by the isp
entity. Instead we should test the sink format of the resizer
which is guaranteed to be supported by the isp entity.
Fixes: 251b6eebb6c49 ("media: staging: rkisp1: rsz: Add support to more YUV encoded mbus codes on src pad")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
index 813670ed9577..79deed8adcea 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
@@ -520,14 +520,15 @@ static void rkisp1_rsz_set_src_fmt(struct rkisp1_resizer *rsz,
struct v4l2_mbus_framefmt *format,
unsigned int which)
{
- const struct rkisp1_isp_mbus_info *mbus_info;
- struct v4l2_mbus_framefmt *src_fmt;
+ const struct rkisp1_isp_mbus_info *sink_mbus_info;
+ struct v4l2_mbus_framefmt *src_fmt, *sink_fmt;
+ sink_fmt = rkisp1_rsz_get_pad_fmt(rsz, cfg, RKISP1_RSZ_PAD_SINK, which);
src_fmt = rkisp1_rsz_get_pad_fmt(rsz, cfg, RKISP1_RSZ_PAD_SRC, which);
- mbus_info = rkisp1_isp_mbus_info_get(src_fmt->code);
+ sink_mbus_info = rkisp1_isp_mbus_info_get(sink_fmt->code);
/* for YUV formats, userspace can change the mbus code on the src pad if it is supported */
- if (mbus_info->pixel_enc == V4L2_PIXEL_ENC_YUV &&
+ if (sink_mbus_info->pixel_enc == V4L2_PIXEL_ENC_YUV &&
rkisp1_rsz_get_yuv_mbus_info(format->code))
src_fmt->code = format->code;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 356/677] media: aspeed: fix clock handling logic
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (354 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 355/677] media: rkisp1: rsz: crash fix when setting src format Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 357/677] drm/panel-simple: Undo enable if HPD never asserts Greg Kroah-Hartman
` (327 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jae Hyun Yoo, Joel Stanley,
Eddie James, Stephen Boyd, Hans Verkuil, Mauro Carvalho Chehab,
Sasha Levin
From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
[ Upstream commit 3536169f8531c2c5b153921dc7d1ac9fd570cda7 ]
Video engine uses eclk and vclk for its clock sources and its reset
control is coupled with eclk so the current clock enabling sequence works
like below.
Enable eclk
De-assert Video Engine reset
10ms delay
Enable vclk
It introduces improper reset on the Video Engine hardware and eventually
the hardware generates unexpected DMA memory transfers that can corrupt
memory region in random and sporadic patterns. This issue is observed
very rarely on some specific AST2500 SoCs but it causes a critical
kernel panic with making a various shape of signature so it's extremely
hard to debug. Moreover, the issue is observed even when the video
engine is not actively used because udevd turns on the video engine
hardware for a short time to make a query in every boot.
To fix this issue, this commit changes the clock handling logic to make
the reset de-assertion triggered after enabling both eclk and vclk. Also,
it adds clk_unprepare call for a case when probe fails.
clk: ast2600: fix reset settings for eclk and vclk
Video engine reset setting should be coupled with eclk to match it
with the setting for previous Aspeed SoCs which is defined in
clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
driver. Also, reset bit 6 is defined as 'Video Engine' reset in
datasheet so it should be de-asserted when eclk is enabled. This
commit fixes the setting.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk-ast2600.c | 4 ++--
drivers/media/platform/aspeed-video.c | 9 ++++++---
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index a55b37fc2c8b..bc3be5f3eae1 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -61,10 +61,10 @@ static void __iomem *scu_g6_base;
static const struct aspeed_gate_data aspeed_g6_gates[] = {
/* clk rst name parent flags */
[ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
- [ASPEED_CLK_GATE_ECLK] = { 1, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */
+ [ASPEED_CLK_GATE_ECLK] = { 1, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */
[ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
/* vclk parent - dclk/d1clk/hclk/mclk */
- [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */
+ [ASPEED_CLK_GATE_VCLK] = { 3, -1, "vclk-gate", NULL, 0 }, /* Video Capture */
[ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */
/* From dpll */
[ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index f2c4dadd6a0e..7bb6babdcade 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -514,8 +514,8 @@ static void aspeed_video_off(struct aspeed_video *video)
aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
/* Turn off the relevant clocks */
- clk_disable(video->vclk);
clk_disable(video->eclk);
+ clk_disable(video->vclk);
clear_bit(VIDEO_CLOCKS_ON, &video->flags);
}
@@ -526,8 +526,8 @@ static void aspeed_video_on(struct aspeed_video *video)
return;
/* Turn on the relevant clocks */
- clk_enable(video->eclk);
clk_enable(video->vclk);
+ clk_enable(video->eclk);
set_bit(VIDEO_CLOCKS_ON, &video->flags);
}
@@ -1719,8 +1719,11 @@ static int aspeed_video_probe(struct platform_device *pdev)
return rc;
rc = aspeed_video_setup_video(video);
- if (rc)
+ if (rc) {
+ clk_unprepare(video->vclk);
+ clk_unprepare(video->eclk);
return rc;
+ }
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 357/677] drm/panel-simple: Undo enable if HPD never asserts
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (355 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 356/677] media: aspeed: fix clock handling logic Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 358/677] power: supply: bq27xxx: fix sign of current_now for newer ICs Greg Kroah-Hartman
` (326 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Douglas Anderson, Stephen Boyd,
Linus Walleij, Sasha Levin
From: Douglas Anderson <dianders@chromium.org>
[ Upstream commit 5e7222a3674ea7422370779884dd53aabe9e4a9d ]
If the HPD signal never asserts in panel_simple_prepare() and we
return an error, we should unset the enable GPIO and disable the
regulator to make it consistent for the caller.
At the moment I have some hardware where HPD sometimes doesn't assert.
Obviously that needs to be debugged, but this patch makes it so that
if I add a retry that I can make things work.
Fixes: 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.1.I33fcbd64ab409cfe4f9491bf449f51925a4d3281@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/panel/panel-simple.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..e8b1a0e873ea 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -406,7 +406,7 @@ static int panel_simple_prepare(struct drm_panel *panel)
if (IS_ERR(p->hpd_gpio)) {
err = panel_simple_get_hpd_gpio(panel->dev, p, false);
if (err)
- return err;
+ goto error;
}
err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
@@ -418,13 +418,20 @@ static int panel_simple_prepare(struct drm_panel *panel)
if (err) {
dev_err(panel->dev,
"error waiting for hpd GPIO: %d\n", err);
- return err;
+ goto error;
}
}
p->prepared_time = ktime_get();
return 0;
+
+error:
+ gpiod_set_value_cansleep(p->enable_gpio, 0);
+ regulator_disable(p->supply);
+ p->unprepared_time = ktime_get();
+
+ return err;
}
static int panel_simple_enable(struct drm_panel *panel)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 358/677] power: supply: bq27xxx: fix sign of current_now for newer ICs
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (356 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 357/677] drm/panel-simple: Undo enable if HPD never asserts Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 359/677] drm/probe-helper: Check epoch counter in output_poll_execute() Greg Kroah-Hartman
` (325 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthias Schiffer, Sebastian Reichel,
Sasha Levin
From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
[ Upstream commit b67fdcb7099e9c640bad625c4dd6399debb3376a ]
Commit cd060b4d0868 ("power: supply: bq27xxx: fix polarity of current_now")
changed the sign of current_now for all bq27xxx variants, but on BQ28Z610
I'm now seeing negated values *with* that patch.
The GTA04/Openmoko device that was used for testing uses a BQ27000 or
BQ27010 IC, so I assume only the BQ27XXX_O_ZERO code path was incorrect.
Revert the behaviour for newer ICs.
Fixes: cd060b4d0868 "power: supply: bq27xxx: fix polarity of current_now"
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/bq27xxx_battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 0262109ac285..20e1dc8a87cf 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1804,7 +1804,7 @@ static int bq27xxx_battery_current(struct bq27xxx_device_info *di,
val->intval = curr * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
} else {
/* Other gauges return signed value */
- val->intval = -(int)((s16)curr) * 1000;
+ val->intval = (int)((s16)curr) * 1000;
}
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 359/677] drm/probe-helper: Check epoch counter in output_poll_execute()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (357 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 358/677] power: supply: bq27xxx: fix sign of current_now for newer ICs Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 360/677] media: venus: core: Fix some resource leaks in the error path of venus_probe() Greg Kroah-Hartman
` (324 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Vetter, Noralf Trønnes,
Sasha Levin
From: Noralf Trønnes <noralf@tronnes.org>
[ Upstream commit dc659a4e852b591771fc2e5abb60f4455b0cf316 ]
drm_helper_hpd_irq_event() checks the epoch counter to determine
connector status change. This was introduced in
commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector").
Do the same for output_poll_execute() so it can detect other changes
beside connection status value changes.
v2:
- Add Fixes tag (Daniel)
Fixes: 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-3-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_probe_helper.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index ad59a51eab6d..e7e1ee2aa352 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -624,6 +624,7 @@ static void output_poll_execute(struct work_struct *work)
struct drm_connector_list_iter conn_iter;
enum drm_connector_status old_status;
bool repoll = false, changed;
+ u64 old_epoch_counter;
if (!dev->mode_config.poll_enabled)
return;
@@ -660,8 +661,9 @@ static void output_poll_execute(struct work_struct *work)
repoll = true;
+ old_epoch_counter = connector->epoch_counter;
connector->status = drm_helper_probe_detect(connector, NULL, false);
- if (old_status != connector->status) {
+ if (old_epoch_counter != connector->epoch_counter) {
const char *old, *new;
/*
@@ -690,6 +692,9 @@ static void output_poll_execute(struct work_struct *work)
connector->base.id,
connector->name,
old, new);
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] epoch counter %llu -> %llu\n",
+ connector->base.id, connector->name,
+ old_epoch_counter, connector->epoch_counter);
changed = true;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 360/677] media: venus: core: Fix some resource leaks in the error path of venus_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (358 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 359/677] drm/probe-helper: Check epoch counter in output_poll_execute() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 361/677] media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming() Greg Kroah-Hartman
` (323 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET,
Stanimir Varbanov, Mauro Carvalho Chehab, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 5a465c5391a856a0c1e9554964d660676c35d1b2 ]
If an error occurs after a successful 'of_icc_get()' call, it must be
undone.
Use 'devm_of_icc_get()' instead of 'of_icc_get()' to avoid the leak.
Update the remove function accordingly and axe the now unneeded
'icc_put()' calls.
Fixes: 32f0a6ddc8c9 ("media: venus: Use on-chip interconnect API")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/qcom/venus/core.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index d2842f496b47..ae374bb2a48f 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -224,11 +224,11 @@ static int venus_probe(struct platform_device *pdev)
if (IS_ERR(core->base))
return PTR_ERR(core->base);
- core->video_path = of_icc_get(dev, "video-mem");
+ core->video_path = devm_of_icc_get(dev, "video-mem");
if (IS_ERR(core->video_path))
return PTR_ERR(core->video_path);
- core->cpucfg_path = of_icc_get(dev, "cpu-cfg");
+ core->cpucfg_path = devm_of_icc_get(dev, "cpu-cfg");
if (IS_ERR(core->cpucfg_path))
return PTR_ERR(core->cpucfg_path);
@@ -367,9 +367,6 @@ static int venus_remove(struct platform_device *pdev)
hfi_destroy(core);
- icc_put(core->video_path);
- icc_put(core->cpucfg_path);
-
v4l2_device_unregister(&core->v4l2_dev);
mutex_destroy(&core->pm_lock);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 361/677] media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (359 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 360/677] media: venus: core: Fix some resource leaks in the error path of venus_probe() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 362/677] media: m88ds3103: fix return value check in m88ds3103_probe() Greg Kroah-Hartman
` (322 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, TOTE Robot, Jia-Ju Bai, Chen-Yu Tsai,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Jia-Ju Bai <baijiaju1990@gmail.com>
[ Upstream commit f3d384e36630e2a552d874e422835606d9cf230a ]
When sun6i_video_remote_subdev() returns NULL to subdev, no error return
code of sun6i_video_start_streaming() is assigned.
To fix this bug, ret is assigned with -EINVAL in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 5cc7522d8965 ("media: sun6i: Add support for Allwinner CSI V3s")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
index b55de9ab64d8..3181d0781b61 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
@@ -151,8 +151,10 @@ static int sun6i_video_start_streaming(struct vb2_queue *vq, unsigned int count)
}
subdev = sun6i_video_remote_subdev(video, NULL);
- if (!subdev)
+ if (!subdev) {
+ ret = -EINVAL;
goto stop_media_pipeline;
+ }
config.pixelformat = video->fmt.fmt.pix.pixelformat;
config.code = video->mbus_code;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 362/677] media: m88ds3103: fix return value check in m88ds3103_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (360 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 361/677] media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 363/677] media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30 Greg Kroah-Hartman
` (321 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wei Yongjun,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit e61f9ea271933d987ab895c689fa37744f6fc27f ]
In case of error, the function i2c_new_dummy_device() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-frontends/m88ds3103.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index cfa4cdde99d8..02e8aa11e36e 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -1904,8 +1904,8 @@ static int m88ds3103_probe(struct i2c_client *client,
dev->dt_client = i2c_new_dummy_device(client->adapter,
dev->dt_addr);
- if (!dev->dt_client) {
- ret = -ENODEV;
+ if (IS_ERR(dev->dt_client)) {
+ ret = PTR_ERR(dev->dt_client);
goto err_kfree;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 363/677] media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (361 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 362/677] media: m88ds3103: fix return value check in m88ds3103_probe() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 364/677] media: [next] staging: media: atomisp: fix memory leak of object flash Greg Kroah-Hartman
` (320 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liu Ying, Laurent Pinchart,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Liu Ying <victor.liu@nxp.com>
[ Upstream commit c451ee146d449bbe39835fc3d9007b7f06332415 ]
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30.
So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30'
row should be spaces instead of '0's.
Fixes: 54f38fcae536 ("media: docs: move uAPI book to userspace-api/media")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/userspace-api/media/v4l/subdev-formats.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index 7f16cbe46e5c..e6a9faa81197 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
- MEDIA_BUS_FMT_RGB101010_1X30
- 0x1018
-
- - 0
- - 0
+ -
+ -
- r\ :sub:`9`
- r\ :sub:`8`
- r\ :sub:`7`
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 364/677] media: [next] staging: media: atomisp: fix memory leak of object flash
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (362 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 363/677] media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30 Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 365/677] media: atomisp: Fixed error handling path Greg Kroah-Hartman
` (319 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King,
Mauro Carvalho Chehab, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 6045b01dd0e3cd3759eafe7f290ed04c957500b1 ]
In the case where the call to lm3554_platform_data_func returns an
error there is a memory leak on the error return path of object
flash. Fix this by adding an error return path that will free
flash and rename labels fail2 to fail3 and fail1 to fail2.
Link: https://lore.kernel.org/linux-media/20200902165852.201155-1-colin.king@canonical.com
Fixes: 9289cdf39992 ("staging: media: atomisp: Convert to GPIO descriptors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../media/atomisp/i2c/atomisp-lm3554.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c b/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
index 7ca7378b1859..0ab67b2aec67 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-lm3554.c
@@ -843,8 +843,10 @@ static int lm3554_probe(struct i2c_client *client)
return -ENOMEM;
flash->pdata = lm3554_platform_data_func(client);
- if (IS_ERR(flash->pdata))
- return PTR_ERR(flash->pdata);
+ if (IS_ERR(flash->pdata)) {
+ err = PTR_ERR(flash->pdata);
+ goto fail1;
+ }
v4l2_i2c_subdev_init(&flash->sd, client, &lm3554_ops);
flash->sd.internal_ops = &lm3554_internal_ops;
@@ -856,7 +858,7 @@ static int lm3554_probe(struct i2c_client *client)
ARRAY_SIZE(lm3554_controls));
if (ret) {
dev_err(&client->dev, "error initialize a ctrl_handler.\n");
- goto fail2;
+ goto fail3;
}
for (i = 0; i < ARRAY_SIZE(lm3554_controls); i++)
@@ -865,14 +867,14 @@ static int lm3554_probe(struct i2c_client *client)
if (flash->ctrl_handler.error) {
dev_err(&client->dev, "ctrl_handler error.\n");
- goto fail2;
+ goto fail3;
}
flash->sd.ctrl_handler = &flash->ctrl_handler;
err = media_entity_pads_init(&flash->sd.entity, 0, NULL);
if (err) {
dev_err(&client->dev, "error initialize a media entity.\n");
- goto fail1;
+ goto fail2;
}
flash->sd.entity.function = MEDIA_ENT_F_FLASH;
@@ -884,14 +886,15 @@ static int lm3554_probe(struct i2c_client *client)
err = lm3554_gpio_init(client);
if (err) {
dev_err(&client->dev, "gpio request/direction_output fail");
- goto fail2;
+ goto fail3;
}
return atomisp_register_i2c_module(&flash->sd, NULL, LED_FLASH);
-fail2:
+fail3:
media_entity_cleanup(&flash->sd.entity);
v4l2_ctrl_handler_free(&flash->ctrl_handler);
-fail1:
+fail2:
v4l2_device_unregister_subdev(&flash->sd);
+fail1:
kfree(flash);
return err;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 365/677] media: atomisp: Fixed error handling path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (363 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 364/677] media: [next] staging: media: atomisp: fix memory leak of object flash Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 366/677] media: m88rs6000t: avoid potential out-of-bounds reads on arrays Greg Kroah-Hartman
` (318 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Souptick Joarder, John Hubbard,
Ira Weiny, Dan Carpenter, Mauro Carvalho Chehab, Sasha Levin
From: Souptick Joarder <jrdr.linux@gmail.com>
[ Upstream commit 16a5dcf7fbc2f5cd10c1e6264262bfa3832fb7d5 ]
Inside alloc_user_pages() based on flag value either pin_user_pages()
or get_user_pages_fast() will be called. However, these API might fail.
But free_user_pages() called in error handling path doesn't bother
about return value and will try to unpin bo->pgnr pages, which is
incorrect.
Fix this by passing the page_nr to free_user_pages(). If page_nr > 0
pages will be unpinned based on bo->mem_type. This will also take care
of non error handling path.
allocation")
Link: https://lore.kernel.org/linux-media/1601219284-13275-1-git-send-email-jrdr.linux@gmail.com
Fixes: 14a638ab96c5 ("media: atomisp: use pin_user_pages() for memory
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/atomisp/pci/hmm/hmm_bo.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm_bo.c b/drivers/staging/media/atomisp/pci/hmm/hmm_bo.c
index f13af2329f48..0168f9839c90 100644
--- a/drivers/staging/media/atomisp/pci/hmm/hmm_bo.c
+++ b/drivers/staging/media/atomisp/pci/hmm/hmm_bo.c
@@ -857,16 +857,17 @@ static void free_private_pages(struct hmm_buffer_object *bo,
kfree(bo->page_obj);
}
-static void free_user_pages(struct hmm_buffer_object *bo)
+static void free_user_pages(struct hmm_buffer_object *bo,
+ unsigned int page_nr)
{
int i;
hmm_mem_stat.usr_size -= bo->pgnr;
if (bo->mem_type == HMM_BO_MEM_TYPE_PFN) {
- unpin_user_pages(bo->pages, bo->pgnr);
+ unpin_user_pages(bo->pages, page_nr);
} else {
- for (i = 0; i < bo->pgnr; i++)
+ for (i = 0; i < page_nr; i++)
put_page(bo->pages[i]);
}
kfree(bo->pages);
@@ -942,6 +943,8 @@ static int alloc_user_pages(struct hmm_buffer_object *bo,
dev_err(atomisp_dev,
"get_user_pages err: bo->pgnr = %d, pgnr actually pinned = %d.\n",
bo->pgnr, page_nr);
+ if (page_nr < 0)
+ page_nr = 0;
goto out_of_mem;
}
@@ -954,7 +957,7 @@ static int alloc_user_pages(struct hmm_buffer_object *bo,
out_of_mem:
- free_user_pages(bo);
+ free_user_pages(bo, page_nr);
return -ENOMEM;
}
@@ -1037,7 +1040,7 @@ void hmm_bo_free_pages(struct hmm_buffer_object *bo)
if (bo->type == HMM_BO_PRIVATE)
free_private_pages(bo, &dynamic_pool, &reserved_pool);
else if (bo->type == HMM_BO_USER)
- free_user_pages(bo);
+ free_user_pages(bo, bo->pgnr);
else
dev_err(atomisp_dev, "invalid buffer type.\n");
mutex_unlock(&bo->mutex);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 366/677] media: m88rs6000t: avoid potential out-of-bounds reads on arrays
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (364 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 365/677] media: atomisp: Fixed error handling path Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 367/677] media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() Greg Kroah-Hartman
` (317 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King,
Mauro Carvalho Chehab, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 9baa3d64e8e2373ddd11c346439e5dfccb2cbb0d ]
There a 3 array for-loops that don't check the upper bounds of the
index into arrays and this may lead to potential out-of-bounds
reads. Fix this by adding array size upper bounds checks to be
full safe.
Addresses-Coverity: ("Out-of-bounds read")
Link: https://lore.kernel.org/linux-media/20201007121628.20676-1-colin.king@canonical.com
Fixes: 333829110f1d ("[media] m88rs6000t: add new dvb-s/s2 tuner for integrated chip M88RS6000")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/tuners/m88rs6000t.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/tuners/m88rs6000t.c b/drivers/media/tuners/m88rs6000t.c
index b3505f402476..8647c50b66e5 100644
--- a/drivers/media/tuners/m88rs6000t.c
+++ b/drivers/media/tuners/m88rs6000t.c
@@ -525,7 +525,7 @@ static int m88rs6000t_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
PGA2_cri = PGA2_GC >> 2;
PGA2_crf = PGA2_GC & 0x03;
- for (i = 0; i <= RF_GC; i++)
+ for (i = 0; i <= RF_GC && i < ARRAY_SIZE(RFGS); i++)
RFG += RFGS[i];
if (RF_GC == 0)
@@ -537,12 +537,12 @@ static int m88rs6000t_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
if (RF_GC == 3)
RFG += 100;
- for (i = 0; i <= IF_GC; i++)
+ for (i = 0; i <= IF_GC && i < ARRAY_SIZE(IFGS); i++)
IFG += IFGS[i];
TIAG = TIA_GC * TIA_GS;
- for (i = 0; i <= BB_GC; i++)
+ for (i = 0; i <= BB_GC && i < ARRAY_SIZE(BBGS); i++)
BBG += BBGS[i];
PGA2G = PGA2_cri * PGA2_cri_GS + PGA2_crf * PGA2_crf_GS;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 367/677] media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (365 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 366/677] media: m88rs6000t: avoid potential out-of-bounds reads on arrays Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 368/677] x86/kprobes: Retrieve correct opcode for group instruction Greg Kroah-Hartman
` (316 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Mauro Carvalho Chehab,
Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit ba11bbf303fafb33989e95473e409f6ab412b18d ]
The "s3a_buf" is freed along with all the other items on the
"asd->s3a_stats" list. It leads to a double free and a use after free.
Link: https://lore.kernel.org/linux-media/X9dSO3RGf7r0pq2k@mwanda
Fixes: ad85094b293e ("Revert "media: staging: atomisp: Remove driver"")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 2ae50decfc8b..9da82855552d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -948,10 +948,8 @@ int atomisp_alloc_css_stat_bufs(struct atomisp_sub_device *asd,
dev_dbg(isp->dev, "allocating %d dis buffers\n", count);
while (count--) {
dis_buf = kzalloc(sizeof(struct atomisp_dis_buf), GFP_KERNEL);
- if (!dis_buf) {
- kfree(s3a_buf);
+ if (!dis_buf)
goto error;
- }
if (atomisp_css_allocate_stat_buffers(
asd, stream_id, NULL, dis_buf, NULL)) {
kfree(dis_buf);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 368/677] x86/kprobes: Retrieve correct opcode for group instruction
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (366 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 367/677] media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 369/677] drm/amdkfd: fix build error with AMD_IOMMU_V2=m Greg Kroah-Hartman
` (315 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu,
Peter Zijlstra (Intel),
Sasha Levin
From: Masami Hiramatsu <mhiramat@kernel.org>
[ Upstream commit d60ad3d46f1d04a282c56159f1deb675c12733fd ]
Since the opcodes start from 0xff are group5 instruction group which is
not 2 bytes opcode but the extended opcode determined by the MOD/RM byte.
The commit abd82e533d88 ("x86/kprobes: Do not decode opcode in resume_execution()")
used insn->opcode.bytes[1], but that is not correct. We have to refer
the insn->modrm.bytes[1] instead.
Fixes: abd82e533d88 ("x86/kprobes: Do not decode opcode in resume_execution()")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/161469872400.49483.18214724458034233166.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/kprobes/core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index df776cdca327..08674e7a5d7b 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -448,7 +448,11 @@ static void set_resume_flags(struct kprobe *p, struct insn *insn)
break;
#endif
case 0xff:
- opcode = insn->opcode.bytes[1];
+ /*
+ * Since the 0xff is an extended group opcode, the instruction
+ * is determined by the MOD/RM byte.
+ */
+ opcode = insn->modrm.bytes[0];
if ((opcode & 0x30) == 0x10) {
/*
* call absolute, indirect
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 369/677] drm/amdkfd: fix build error with AMD_IOMMU_V2=m
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (367 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 368/677] x86/kprobes: Retrieve correct opcode for group instruction Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 370/677] drm/amdkfd: Fix recursive lock warnings Greg Kroah-Hartman
` (314 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Felix Kuehling,
Christian König, Alex Deucher, Sasha Levin
From: Felix Kuehling <Felix.Kuehling@amd.com>
[ Upstream commit 1e87068570a2cc4db5f95a881686add71729e769 ]
Using 'imply AMD_IOMMU_V2' does not guarantee that the driver can link
against the exported functions. If the GPU driver is built-in but the
IOMMU driver is a loadable module, the kfd_iommu.c file is indeed
built but does not work:
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_bind_process_to_device':
kfd_iommu.c:(.text+0x516): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_unbind_process':
kfd_iommu.c:(.text+0x691): undefined reference to `amd_iommu_unbind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_suspend':
kfd_iommu.c:(.text+0x966): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x97f): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x9a4): undefined reference to `amd_iommu_free_device'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_resume':
kfd_iommu.c:(.text+0xa9a): undefined reference to `amd_iommu_init_device'
x86_64-linux-ld: kfd_iommu.c:(.text+0xadc): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xaff): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xc72): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe08): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe26): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe42): undefined reference to `amd_iommu_free_device'
Use IS_REACHABLE to only build IOMMU-V2 support if the amd_iommu symbols
are reachable by the amdkfd driver. Output a warning if they are not,
because that may not be what the user was expecting.
Fixes: 64d1c3a43a6f ("drm/amdkfd: Centralize IOMMUv2 code and make it conditional")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdkfd/kfd_iommu.c | 6 ++++++
drivers/gpu/drm/amd/amdkfd/kfd_iommu.h | 9 +++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c
index 66bbca61e3ef..9318936aa805 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c
@@ -20,6 +20,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <linux/kconfig.h>
+
+#if IS_REACHABLE(CONFIG_AMD_IOMMU_V2)
+
#include <linux/printk.h>
#include <linux/device.h>
#include <linux/slab.h>
@@ -355,3 +359,5 @@ int kfd_iommu_add_perf_counters(struct kfd_topology_device *kdev)
return 0;
}
+
+#endif
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.h b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.h
index dd23d9fdf6a8..afd420b01a0c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.h
@@ -23,7 +23,9 @@
#ifndef __KFD_IOMMU_H__
#define __KFD_IOMMU_H__
-#if defined(CONFIG_AMD_IOMMU_V2_MODULE) || defined(CONFIG_AMD_IOMMU_V2)
+#include <linux/kconfig.h>
+
+#if IS_REACHABLE(CONFIG_AMD_IOMMU_V2)
#define KFD_SUPPORT_IOMMU_V2
@@ -46,6 +48,9 @@ static inline int kfd_iommu_check_device(struct kfd_dev *kfd)
}
static inline int kfd_iommu_device_init(struct kfd_dev *kfd)
{
+#if IS_MODULE(CONFIG_AMD_IOMMU_V2)
+ WARN_ONCE(1, "iommu_v2 module is not usable by built-in KFD");
+#endif
return 0;
}
@@ -73,6 +78,6 @@ static inline int kfd_iommu_add_perf_counters(struct kfd_topology_device *kdev)
return 0;
}
-#endif /* defined(CONFIG_AMD_IOMMU_V2) */
+#endif /* IS_REACHABLE(CONFIG_AMD_IOMMU_V2) */
#endif /* __KFD_IOMMU_H__ */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 370/677] drm/amdkfd: Fix recursive lock warnings
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (368 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 369/677] drm/amdkfd: fix build error with AMD_IOMMU_V2=m Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 371/677] drm/amd/display: Free local data after use Greg Kroah-Hartman
` (313 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felix Kuehling, Christian König,
Alex Deucher, Sasha Levin
From: Felix Kuehling <Felix.Kuehling@amd.com>
[ Upstream commit 7816e4a98ce3bc7c562807240b4f14171e177420 ]
memalloc_nofs_save/restore are no longer sufficient to prevent recursive
lock warnings when holding locks that can be taken in MMU notifiers. Use
memalloc_noreclaim_save/restore instead.
Fixes: f920e413ff9c ("mm: track mmu notifiers in fs_reclaim_acquire/release")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index adbfd1d227a5..a566bbe26bdd 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -92,13 +92,13 @@ struct amdgpu_prt_cb {
static inline void amdgpu_vm_eviction_lock(struct amdgpu_vm *vm)
{
mutex_lock(&vm->eviction_lock);
- vm->saved_flags = memalloc_nofs_save();
+ vm->saved_flags = memalloc_noreclaim_save();
}
static inline int amdgpu_vm_eviction_trylock(struct amdgpu_vm *vm)
{
if (mutex_trylock(&vm->eviction_lock)) {
- vm->saved_flags = memalloc_nofs_save();
+ vm->saved_flags = memalloc_noreclaim_save();
return 1;
}
return 0;
@@ -106,7 +106,7 @@ static inline int amdgpu_vm_eviction_trylock(struct amdgpu_vm *vm)
static inline void amdgpu_vm_eviction_unlock(struct amdgpu_vm *vm)
{
- memalloc_nofs_restore(vm->saved_flags);
+ memalloc_noreclaim_restore(vm->saved_flags);
mutex_unlock(&vm->eviction_lock);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 371/677] drm/amd/display: Free local data after use
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (369 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 370/677] drm/amdkfd: Fix recursive lock warnings Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 372/677] of: overlay: fix for_each_child.cocci warnings Greg Kroah-Hartman
` (312 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Victor Lu, Rodrigo Siqueira,
Alex Deucher, Sasha Levin
From: Victor Lu <victorchengchi.lu@amd.com>
[ Upstream commit 616cf23b6cf40ad6f03ffbddfa1b6c4eb68d8ae1 ]
Fixes the following memory leak in dc_link_construct():
unreferenced object 0xffffa03e81471400 (size 1024):
comm "amd_module_load", pid 2486, jiffies 4294946026 (age 10.544s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000000bdf5c4a>] kmem_cache_alloc_trace+0x30a/0x4a0
[<00000000e7c59f0e>] link_create+0xce/0xac0 [amdgpu]
[<000000002fb6c072>] dc_create+0x370/0x720 [amdgpu]
[<000000000094d1f3>] amdgpu_dm_init+0x18e/0x17a0 [amdgpu]
[<00000000bec048fd>] dm_hw_init+0x12/0x20 [amdgpu]
[<00000000a2bb7cf6>] amdgpu_device_init+0x1463/0x1e60 [amdgpu]
[<0000000032d3bb13>] amdgpu_driver_load_kms+0x5b/0x330 [amdgpu]
[<00000000a27834f9>] amdgpu_pci_probe+0x192/0x280 [amdgpu]
[<00000000fec7d291>] local_pci_probe+0x47/0xa0
[<0000000055dbbfa7>] pci_device_probe+0xe3/0x180
[<00000000815da970>] really_probe+0x1c4/0x4e0
[<00000000b4b6974b>] driver_probe_device+0x62/0x150
[<000000000f9ecc61>] device_driver_attach+0x58/0x60
[<000000000f65c843>] __driver_attach+0xd6/0x150
[<000000002f5e3683>] bus_for_each_dev+0x6a/0xc0
[<00000000a1cfc897>] driver_attach+0x1e/0x20
Fixes: 3a00c04212d1cf ("drm/amd/display/dc/core/dc_link: Move some local data from the stack to the heap")
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index bd0101013ec8..440bf0a0e12a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1603,6 +1603,7 @@ static bool dc_link_construct(struct dc_link *link,
link->psr_settings.psr_version = DC_PSR_VERSION_UNSUPPORTED;
DC_LOG_DC("BIOS object table - %s finished successfully.\n", __func__);
+ kfree(info);
return true;
device_tag_fail:
link->link_enc->funcs->destroy(&link->link_enc);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 372/677] of: overlay: fix for_each_child.cocci warnings
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (370 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 371/677] drm/amd/display: Free local data after use Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 373/677] scsi: qla2xxx: Check kzalloc() return value Greg Kroah-Hartman
` (311 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sumera Priyadarsini,
kernel test robot, Julia Lawall, Frank Rowand, Rob Herring,
Sasha Levin
From: kernel test robot <lkp@intel.com>
[ Upstream commit c4d74f0f978ed5ceee62cd3f6708081042e582a1 ]
Function "for_each_child_of_node" should have of_node_put() before goto.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes: 82c2d81361ec ("coccinelle: iterators: Add for_each_child.cocci script")
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103221918450.2918@hadrien
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/of/overlay.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 23effe5e50ec..2d132949572d 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -796,6 +796,7 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs,
if (!fragment->target) {
of_node_put(fragment->overlay);
ret = -EINVAL;
+ of_node_put(node);
goto err_free_fragments;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 373/677] scsi: qla2xxx: Check kzalloc() return value
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (371 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 372/677] of: overlay: fix for_each_child.cocci warnings Greg Kroah-Hartman
@ 2021-05-12 14:46 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 374/677] x86/kprobes: Fix to check non boostable prefixes correctly Greg Kroah-Hartman
` (310 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Himanshu Madhani, Saurav Kashyap,
Nilesh Javali, Quinn Tran, Mike Christie, Daniel Wagner,
Lee Duncan, Bart Van Assche, Martin K. Petersen, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit e5406d8ad4a1659f4d4d1b39fe203855c4eaef2d ]
Instead of crashing if kzalloc() fails, make qla2x00_get_host_stats()
return -ENOMEM.
Link: https://lore.kernel.org/r/20210320232359.941-8-bvanassche@acm.org
Fixes: dbf1f53cfd23 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/qla2xxx/qla_bsg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index d021e51344f5..aef2f7cc89d3 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -2584,6 +2584,10 @@ qla2x00_get_host_stats(struct bsg_job *bsg_job)
}
data = kzalloc(response_len, GFP_KERNEL);
+ if (!data) {
+ kfree(req_data);
+ return -ENOMEM;
+ }
ret = qla2xxx_get_ini_stats(fc_bsg_to_shost(bsg_job), req_data->stat_type,
data, response_len);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 374/677] x86/kprobes: Fix to check non boostable prefixes correctly
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (372 preceding siblings ...)
2021-05-12 14:46 ` [PATCH 5.12 373/677] scsi: qla2xxx: Check kzalloc() return value Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 375/677] drm/omap: dsi: Add missing IRQF_ONESHOT Greg Kroah-Hartman
` (309 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu, Ingo Molnar, Sasha Levin
From: Masami Hiramatsu <mhiramat@kernel.org>
[ Upstream commit 6dd3b8c9f58816a1354be39559f630cd1bd12159 ]
There are 2 bugs in the can_boost() function because of using
x86 insn decoder. Since the insn->opcode never has a prefix byte,
it can not find CS override prefix in it. And the insn->attr is
the attribute of the opcode, thus inat_is_address_size_prefix(
insn->attr) always returns false.
Fix those by checking each prefix bytes with for_each_insn_prefix
loop and getting the correct attribute for each prefix byte.
Also, this removes unlikely, because this is a slow path.
Fixes: a8d11cd0714f ("kprobes/x86: Consolidate insn decoder users for copying code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666691162.1120877.2808435205294352583.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/kprobes/core.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 08674e7a5d7b..0bb9fe021bbe 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -139,6 +139,8 @@ NOKPROBE_SYMBOL(synthesize_relcall);
int can_boost(struct insn *insn, void *addr)
{
kprobe_opcode_t opcode;
+ insn_byte_t prefix;
+ int i;
if (search_exception_tables((unsigned long)addr))
return 0; /* Page fault may occur on this address. */
@@ -151,9 +153,14 @@ int can_boost(struct insn *insn, void *addr)
if (insn->opcode.nbytes != 1)
return 0;
- /* Can't boost Address-size override prefix */
- if (unlikely(inat_is_address_size_prefix(insn->attr)))
- return 0;
+ for_each_insn_prefix(insn, i, prefix) {
+ insn_attr_t attr;
+
+ attr = inat_get_opcode_attribute(prefix);
+ /* Can't boost Address-size override prefix and CS override prefix */
+ if (prefix == 0x2e || inat_is_address_size_prefix(attr))
+ return 0;
+ }
opcode = insn->opcode.bytes[0];
@@ -178,8 +185,8 @@ int can_boost(struct insn *insn, void *addr)
/* clear and set flags are boostable */
return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe));
default:
- /* CS override prefix and call are not boostable */
- return (opcode != 0x2e && opcode != 0x9a);
+ /* call is not boostable */
+ return opcode != 0x9a;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 375/677] drm/omap: dsi: Add missing IRQF_ONESHOT
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (373 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 374/677] x86/kprobes: Fix to check non boostable prefixes correctly Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 376/677] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS) Greg Kroah-Hartman
` (308 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Abaci Robot, Yang Li,
Sebastian Reichel, Tomi Valkeinen, Sasha Levin
From: Yang Li <yang.lee@linux.alibaba.com>
[ Upstream commit 0cafc8d88e6df446751669ec15adc9b807af4501 ]
fixed the following coccicheck:
./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index b31d750c425a..5f1722b040f4 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -4327,7 +4327,8 @@ static int omap_dsi_register_te_irq(struct dsi_data *dsi,
irq_set_status_flags(te_irq, IRQ_NOAUTOEN);
err = request_threaded_irq(te_irq, NULL, omap_dsi_te_irq_handler,
- IRQF_TRIGGER_RISING, "TE", dsi);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "TE", dsi);
if (err) {
dev_err(dsi->dev, "request irq failed with %d\n", err);
gpiod_put(dsi->te_gpio);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 376/677] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (374 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 375/677] drm/omap: dsi: Add missing IRQF_ONESHOT Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 377/677] pata_arasan_cf: fix IRQ check Greg Kroah-Hartman
` (307 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Leoshkevich, Shuah Khan, Sasha Levin
From: Ilya Leoshkevich <iii@linux.ibm.com>
[ Upstream commit cb4969e6f9f5ee12521aec764fa3d4bbd91bc797 ]
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes: 1a940687e424 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/lib.mk | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index a5ce26d548e4..be17462fe146 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -74,7 +74,8 @@ ifdef building_out_of_srctree
rsync -aq $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(OUTPUT); \
fi
@if [ "X$(TEST_PROGS)" != "X" ]; then \
- $(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(OUTPUT)/$(TEST_PROGS)) ; \
+ $(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) \
+ $(addprefix $(OUTPUT)/,$(TEST_PROGS))) ; \
else \
$(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS)); \
fi
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 377/677] pata_arasan_cf: fix IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (375 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 376/677] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS) Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 378/677] pata_ipx4xx_cf: " Greg Kroah-Hartman
` (306 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Viresh Kumar,
Jens Axboe, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit c7e8f404d56b99c80990b19a402c3f640d74be05 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking code
to pass the positive IRQ #s to ata_host_activate(), propagate upstream
-EPROBE_DEFER, and set up the driver to polling mode on (negative) errors
and IRQ0 (libata treats IRQ #0 as a polling mode anyway)...
Fixes: a480167b23ef ("pata_arasan_cf: Adding support for arasan compact flash host controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/pata_arasan_cf.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e9cf31f38450..63f39440a9b4 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -818,12 +818,19 @@ static int arasan_cf_probe(struct platform_device *pdev)
else
quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
- /* if irq is 0, support only PIO */
- acdev->irq = platform_get_irq(pdev, 0);
- if (acdev->irq)
+ /*
+ * If there's an error getting IRQ (or we do get IRQ0),
+ * support only PIO
+ */
+ ret = platform_get_irq(pdev, 0);
+ if (ret > 0) {
+ acdev->irq = ret;
irq_handler = arasan_cf_interrupt;
- else
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+ }
acdev->pbase = res->start;
acdev->vbase = devm_ioremap(&pdev->dev, res->start,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 378/677] pata_ipx4xx_cf: fix IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (376 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 377/677] pata_arasan_cf: fix IRQ check Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 379/677] sata_mv: add IRQ checks Greg Kroah-Hartman
` (305 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Jens Axboe, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ]
The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...
Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/pata_ixp4xx_cf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d1644a8ef9fa..abc0e87ca1a8 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -165,8 +165,12 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
return -ENOMEM;
irq = platform_get_irq(pdev, 0);
- if (irq)
+ if (irq > 0)
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ else if (irq < 0)
+ return irq;
+ else
+ return -EINVAL;
/* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 379/677] sata_mv: add IRQ checks
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (377 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 378/677] pata_ipx4xx_cf: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 380/677] ata: libahci_platform: fix IRQ check Greg Kroah-Hartman
` (304 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Jens Axboe, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ]
The function mv_platform_probe() neglects to check the results of the
calls to platform_get_irq() and irq_of_parse_and_map() and blithely
passes them to ata_host_activate() -- while the latter only checks
for IRQ0 (treating it as a polling mode indicattion) and passes the
negative values to devm_request_irq() causing it to fail as it takes
unsigned values for the IRQ #...
Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ
#s to ata_host_activate(), propagate upstream the negative error codes,
and override the IRQ0 with -EINVAL (as we don't want the polling mode).
Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/sata_mv.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 664ef658a955..b62446ea5f40 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4097,6 +4097,10 @@ static int mv_platform_probe(struct platform_device *pdev)
n_ports = mv_platform_data->n_ports;
irq = platform_get_irq(pdev, 0);
}
+ if (irq < 0)
+ return irq;
+ if (!irq)
+ return -EINVAL;
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 380/677] ata: libahci_platform: fix IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (378 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 379/677] sata_mv: add IRQ checks Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 381/677] seccomp: Fix CONFIG tests for Seccomp_filters Greg Kroah-Hartman
` (303 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Jens Axboe, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ]
Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0
early (as if the call was successful). Override IRQ0 with -EINVAL instead
as the 'libata' regards 0 as "no IRQ" (thus polling) anyway...
Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/libahci_platform.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index de638dafce21..b2f552088291 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -582,11 +582,13 @@ int ahci_platform_init_host(struct platform_device *pdev,
int i, irq, n_ports, rc;
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
if (irq != -EPROBE_DEFER)
dev_err(dev, "no irq\n");
return irq;
}
+ if (!irq)
+ return -EINVAL;
hpriv->irq = irq;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 381/677] seccomp: Fix CONFIG tests for Seccomp_filters
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (379 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 380/677] ata: libahci_platform: fix IRQ check Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 382/677] drm/mediatek: Switch the hdmi bridge ops to the atomic versions Greg Kroah-Hartman
` (302 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kenta Tada, Kees Cook, Sasha Levin
From: Kenta.Tada@sony.com <Kenta.Tada@sony.com>
[ Upstream commit 64bdc0244054f7d4bb621c8b4455e292f4e421bc ]
Strictly speaking, seccomp filters are only used
when CONFIG_SECCOMP_FILTER.
This patch fixes the condition to enable "Seccomp_filters"
in /proc/$pid/status.
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/OSBPR01MB26772D245E2CF4F26B76A989F5669@OSBPR01MB2677.jpnprd01.prod.outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/proc/array.c | 2 ++
init/init_task.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/proc/array.c b/fs/proc/array.c
index bb87e4d89cd8..7ec59171f197 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -342,8 +342,10 @@ static inline void task_seccomp(struct seq_file *m, struct task_struct *p)
seq_put_decimal_ull(m, "NoNewPrivs:\t", task_no_new_privs(p));
#ifdef CONFIG_SECCOMP
seq_put_decimal_ull(m, "\nSeccomp:\t", p->seccomp.mode);
+#ifdef CONFIG_SECCOMP_FILTER
seq_put_decimal_ull(m, "\nSeccomp_filters:\t",
atomic_read(&p->seccomp.filter_count));
+#endif
#endif
seq_puts(m, "\nSpeculation_Store_Bypass:\t");
switch (arch_prctl_spec_ctrl_get(p, PR_SPEC_STORE_BYPASS)) {
diff --git a/init/init_task.c b/init/init_task.c
index 3711cdaafed2..8b08c2e19cbb 100644
--- a/init/init_task.c
+++ b/init/init_task.c
@@ -210,7 +210,7 @@ struct task_struct init_task
#ifdef CONFIG_SECURITY
.security = NULL,
#endif
-#ifdef CONFIG_SECCOMP
+#ifdef CONFIG_SECCOMP_FILTER
.seccomp = { .filter_count = ATOMIC_INIT(0) },
#endif
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 382/677] drm/mediatek: Switch the hdmi bridge ops to the atomic versions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (380 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 381/677] seccomp: Fix CONFIG tests for Seccomp_filters Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 383/677] drm/mediatek: Dont support hdmi connector creation Greg Kroah-Hartman
` (301 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dafna Hirschfeld, Laurent Pinchart,
Chun-Kuang Hu, Sasha Levin
From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
[ Upstream commit 053d231f369ca05cd563ca9738b5a4c73908e697 ]
The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 8ee55f9e2954..f2c810b767ef 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1357,7 +1357,8 @@ static bool mtk_hdmi_bridge_mode_fixup(struct drm_bridge *bridge,
return true;
}
-static void mtk_hdmi_bridge_disable(struct drm_bridge *bridge)
+static void mtk_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
@@ -1371,7 +1372,8 @@ static void mtk_hdmi_bridge_disable(struct drm_bridge *bridge)
hdmi->enabled = false;
}
-static void mtk_hdmi_bridge_post_disable(struct drm_bridge *bridge)
+static void mtk_hdmi_bridge_atomic_post_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
@@ -1406,7 +1408,8 @@ static void mtk_hdmi_bridge_mode_set(struct drm_bridge *bridge,
drm_mode_copy(&hdmi->mode, adjusted_mode);
}
-static void mtk_hdmi_bridge_pre_enable(struct drm_bridge *bridge)
+static void mtk_hdmi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
@@ -1426,7 +1429,8 @@ static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi,
mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode);
}
-static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge)
+static void mtk_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_state)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
@@ -1440,13 +1444,16 @@ static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge)
}
static const struct drm_bridge_funcs mtk_hdmi_bridge_funcs = {
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
.attach = mtk_hdmi_bridge_attach,
.mode_fixup = mtk_hdmi_bridge_mode_fixup,
- .disable = mtk_hdmi_bridge_disable,
- .post_disable = mtk_hdmi_bridge_post_disable,
+ .atomic_disable = mtk_hdmi_bridge_atomic_disable,
+ .atomic_post_disable = mtk_hdmi_bridge_atomic_post_disable,
.mode_set = mtk_hdmi_bridge_mode_set,
- .pre_enable = mtk_hdmi_bridge_pre_enable,
- .enable = mtk_hdmi_bridge_enable,
+ .atomic_pre_enable = mtk_hdmi_bridge_atomic_pre_enable,
+ .atomic_enable = mtk_hdmi_bridge_atomic_enable,
};
static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 383/677] drm/mediatek: Dont support hdmi connector creation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (381 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 382/677] drm/mediatek: Switch the hdmi bridge ops to the atomic versions Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 384/677] nvme-tcp: block BH in sk state_change sk callback Greg Kroah-Hartman
` (300 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dafna Hirschfeld, Laurent Pinchart,
Chun-Kuang Hu, Sasha Levin
From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
[ Upstream commit 2e477391522354e763aa62ee3e281c1ad9e8eb1b ]
commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.
Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.
In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.
This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa6775
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.
Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 151 +++++++++++-----------------
1 file changed, 56 insertions(+), 95 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index f2c810b767ef..7fb358167f8d 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -153,7 +153,7 @@ struct mtk_hdmi_conf {
struct mtk_hdmi {
struct drm_bridge bridge;
struct drm_bridge *next_bridge;
- struct drm_connector conn;
+ struct drm_connector *curr_conn;/* current connector (only valid when 'enabled') */
struct device *dev;
const struct mtk_hdmi_conf *conf;
struct phy *phy;
@@ -186,11 +186,6 @@ static inline struct mtk_hdmi *hdmi_ctx_from_bridge(struct drm_bridge *b)
return container_of(b, struct mtk_hdmi, bridge);
}
-static inline struct mtk_hdmi *hdmi_ctx_from_conn(struct drm_connector *c)
-{
- return container_of(c, struct mtk_hdmi, conn);
-}
-
static u32 mtk_hdmi_read(struct mtk_hdmi *hdmi, u32 offset)
{
return readl(hdmi->regs + offset);
@@ -974,7 +969,7 @@ static int mtk_hdmi_setup_avi_infoframe(struct mtk_hdmi *hdmi,
ssize_t err;
err = drm_hdmi_avi_infoframe_from_display_mode(&frame,
- &hdmi->conn, mode);
+ hdmi->curr_conn, mode);
if (err < 0) {
dev_err(hdmi->dev,
"Failed to get AVI infoframe from mode: %zd\n", err);
@@ -1054,7 +1049,7 @@ static int mtk_hdmi_setup_vendor_specific_infoframe(struct mtk_hdmi *hdmi,
ssize_t err;
err = drm_hdmi_vendor_infoframe_from_display_mode(&frame,
- &hdmi->conn, mode);
+ hdmi->curr_conn, mode);
if (err) {
dev_err(hdmi->dev,
"Failed to get vendor infoframe from mode: %zd\n", err);
@@ -1201,48 +1196,16 @@ mtk_hdmi_update_plugged_status(struct mtk_hdmi *hdmi)
connector_status_connected : connector_status_disconnected;
}
-static enum drm_connector_status hdmi_conn_detect(struct drm_connector *conn,
- bool force)
+static enum drm_connector_status mtk_hdmi_detect(struct mtk_hdmi *hdmi)
{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
return mtk_hdmi_update_plugged_status(hdmi);
}
-static void hdmi_conn_destroy(struct drm_connector *conn)
-{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
-
- mtk_cec_set_hpd_event(hdmi->cec_dev, NULL, NULL);
-
- drm_connector_cleanup(conn);
-}
-
-static int mtk_hdmi_conn_get_modes(struct drm_connector *conn)
-{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
- struct edid *edid;
- int ret;
-
- if (!hdmi->ddc_adpt)
- return -ENODEV;
-
- edid = drm_get_edid(conn, hdmi->ddc_adpt);
- if (!edid)
- return -ENODEV;
-
- hdmi->dvi_mode = !drm_detect_monitor_audio(edid);
-
- drm_connector_update_edid_property(conn, edid);
-
- ret = drm_add_edid_modes(conn, edid);
- kfree(edid);
- return ret;
-}
-
-static int mtk_hdmi_conn_mode_valid(struct drm_connector *conn,
- struct drm_display_mode *mode)
+static int mtk_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
+ struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
struct drm_bridge *next_bridge;
dev_dbg(hdmi->dev, "xres=%d, yres=%d, refresh=%d, intl=%d clock=%d\n",
@@ -1267,74 +1230,57 @@ static int mtk_hdmi_conn_mode_valid(struct drm_connector *conn,
return drm_mode_validate_size(mode, 0x1fff, 0x1fff);
}
-static struct drm_encoder *mtk_hdmi_conn_best_enc(struct drm_connector *conn)
-{
- struct mtk_hdmi *hdmi = hdmi_ctx_from_conn(conn);
-
- return hdmi->bridge.encoder;
-}
-
-static const struct drm_connector_funcs mtk_hdmi_connector_funcs = {
- .detect = hdmi_conn_detect,
- .fill_modes = drm_helper_probe_single_connector_modes,
- .destroy = hdmi_conn_destroy,
- .reset = drm_atomic_helper_connector_reset,
- .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
- .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-static const struct drm_connector_helper_funcs
- mtk_hdmi_connector_helper_funcs = {
- .get_modes = mtk_hdmi_conn_get_modes,
- .mode_valid = mtk_hdmi_conn_mode_valid,
- .best_encoder = mtk_hdmi_conn_best_enc,
-};
-
static void mtk_hdmi_hpd_event(bool hpd, struct device *dev)
{
struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
- if (hdmi && hdmi->bridge.encoder && hdmi->bridge.encoder->dev)
+ if (hdmi && hdmi->bridge.encoder && hdmi->bridge.encoder->dev) {
+ static enum drm_connector_status status;
+
+ status = mtk_hdmi_detect(hdmi);
drm_helper_hpd_irq_event(hdmi->bridge.encoder->dev);
+ drm_bridge_hpd_notify(&hdmi->bridge, status);
+ }
}
/*
* Bridge callbacks
*/
+static enum drm_connector_status mtk_hdmi_bridge_detect(struct drm_bridge *bridge)
+{
+ struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
+
+ return mtk_hdmi_detect(hdmi);
+}
+
+static struct edid *mtk_hdmi_bridge_get_edid(struct drm_bridge *bridge,
+ struct drm_connector *connector)
+{
+ struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
+ struct edid *edid;
+
+ if (!hdmi->ddc_adpt)
+ return NULL;
+ edid = drm_get_edid(connector, hdmi->ddc_adpt);
+ if (!edid)
+ return NULL;
+ hdmi->dvi_mode = !drm_detect_monitor_audio(edid);
+ return edid;
+}
+
static int mtk_hdmi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
int ret;
- if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
- DRM_ERROR("Fix bridge driver to make connector optional!");
+ if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
+ DRM_ERROR("%s: The flag DRM_BRIDGE_ATTACH_NO_CONNECTOR must be supplied\n",
+ __func__);
return -EINVAL;
}
- ret = drm_connector_init_with_ddc(bridge->encoder->dev, &hdmi->conn,
- &mtk_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_HDMIA,
- hdmi->ddc_adpt);
- if (ret) {
- dev_err(hdmi->dev, "Failed to initialize connector: %d\n", ret);
- return ret;
- }
- drm_connector_helper_add(&hdmi->conn, &mtk_hdmi_connector_helper_funcs);
-
- hdmi->conn.polled = DRM_CONNECTOR_POLL_HPD;
- hdmi->conn.interlace_allowed = true;
- hdmi->conn.doublescan_allowed = false;
-
- ret = drm_connector_attach_encoder(&hdmi->conn,
- bridge->encoder);
- if (ret) {
- dev_err(hdmi->dev,
- "Failed to attach connector to encoder: %d\n", ret);
- return ret;
- }
-
if (hdmi->next_bridge) {
ret = drm_bridge_attach(bridge->encoder, hdmi->next_bridge,
bridge, flags);
@@ -1369,6 +1315,8 @@ static void mtk_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
clk_disable_unprepare(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]);
clk_disable_unprepare(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
+ hdmi->curr_conn = NULL;
+
hdmi->enabled = false;
}
@@ -1432,8 +1380,13 @@ static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi,
static void mtk_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
struct drm_bridge_state *old_state)
{
+ struct drm_atomic_state *state = old_state->base.state;
struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
+ /* Retrieve the connector through the atomic state. */
+ hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(state,
+ bridge->encoder);
+
mtk_hdmi_output_set_display_mode(hdmi, &hdmi->mode);
clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]);
@@ -1444,6 +1397,7 @@ static void mtk_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
}
static const struct drm_bridge_funcs mtk_hdmi_bridge_funcs = {
+ .mode_valid = mtk_hdmi_bridge_mode_valid,
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
@@ -1454,6 +1408,8 @@ static const struct drm_bridge_funcs mtk_hdmi_bridge_funcs = {
.mode_set = mtk_hdmi_bridge_mode_set,
.atomic_pre_enable = mtk_hdmi_bridge_atomic_pre_enable,
.atomic_enable = mtk_hdmi_bridge_atomic_enable,
+ .detect = mtk_hdmi_bridge_detect,
+ .get_edid = mtk_hdmi_bridge_get_edid,
};
static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi,
@@ -1669,8 +1625,10 @@ static int mtk_hdmi_audio_get_eld(struct device *dev, void *data, uint8_t *buf,
{
struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
- memcpy(buf, hdmi->conn.eld, min(sizeof(hdmi->conn.eld), len));
-
+ if (hdmi->enabled)
+ memcpy(buf, hdmi->curr_conn->eld, min(sizeof(hdmi->curr_conn->eld), len));
+ else
+ memset(buf, 0, len);
return 0;
}
@@ -1762,6 +1720,9 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
hdmi->bridge.funcs = &mtk_hdmi_bridge_funcs;
hdmi->bridge.of_node = pdev->dev.of_node;
+ hdmi->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
+ | DRM_BRIDGE_OP_HPD;
+ hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
drm_bridge_add(&hdmi->bridge);
ret = mtk_hdmi_clk_enable_audio(hdmi);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 384/677] nvme-tcp: block BH in sk state_change sk callback
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (382 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 383/677] drm/mediatek: Dont support hdmi connector creation Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 385/677] nvmet-tcp: fix incorrect locking in " Greg Kroah-Hartman
` (299 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sagi Grimberg, Christoph Hellwig,
Sasha Levin
From: Sagi Grimberg <sagi@grimberg.me>
[ Upstream commit 8b73b45d54a14588f86792869bfb23098ea254cb ]
The TCP stack can run from process context for a long time
so we should disable BH here.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/tcp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index a0f00cb8f9f3..d7d7c81d0701 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -874,7 +874,7 @@ static void nvme_tcp_state_change(struct sock *sk)
{
struct nvme_tcp_queue *queue;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
queue = sk->sk_user_data;
if (!queue)
goto done;
@@ -895,7 +895,7 @@ static void nvme_tcp_state_change(struct sock *sk)
queue->state_change(sk);
done:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
static inline bool nvme_tcp_queue_more(struct nvme_tcp_queue *queue)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 385/677] nvmet-tcp: fix incorrect locking in state_change sk callback
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (383 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 384/677] nvme-tcp: block BH in sk state_change sk callback Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 386/677] clk: imx: Fix reparenting of UARTs not associated with stdout Greg Kroah-Hartman
` (298 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yi Zhang, Sagi Grimberg,
Christoph Hellwig, Sasha Levin
From: Sagi Grimberg <sagi@grimberg.me>
[ Upstream commit b5332a9f3f3d884a1b646ce155e664cc558c1722 ]
We are not changing anything in the TCP connection state so
we should not take a write_lock but rather a read lock.
This caused a deadlock when running nvmet-tcp and nvme-tcp
on the same system, where state_change callbacks on the
host and on the controller side have causal relationship
and made lockdep report on this with blktests:
================================
WARNING: inconsistent lock state
5.12.0-rc3 #1 Tainted: G I
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage.
nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
{IN-SOFTIRQ-W} state was registered at:
__lock_acquire+0x79b/0x18d0
lock_acquire+0x1ca/0x480
_raw_write_lock_bh+0x39/0x80
nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp]
tcp_fin+0x2a8/0x780
tcp_data_queue+0xf94/0x1f20
tcp_rcv_established+0x6ba/0x1f00
tcp_v4_do_rcv+0x502/0x760
tcp_v4_rcv+0x257e/0x3430
ip_protocol_deliver_rcu+0x69/0x6a0
ip_local_deliver_finish+0x1e2/0x2f0
ip_local_deliver+0x1a2/0x420
ip_rcv+0x4fb/0x6b0
__netif_receive_skb_one_core+0x162/0x1b0
process_backlog+0x1ff/0x770
__napi_poll.constprop.0+0xa9/0x5c0
net_rx_action+0x7b3/0xb30
__do_softirq+0x1f0/0x940
do_softirq+0xa1/0xd0
__local_bh_enable_ip+0xd8/0x100
ip_finish_output2+0x6b7/0x18a0
__ip_queue_xmit+0x706/0x1aa0
__tcp_transmit_skb+0x2068/0x2e20
tcp_write_xmit+0xc9e/0x2bb0
__tcp_push_pending_frames+0x92/0x310
inet_shutdown+0x158/0x300
__nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x2c7/0x460
new_sync_write+0x36c/0x610
vfs_write+0x5c0/0x870
ksys_write+0xf9/0x1d0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
irq event stamp: 10687
hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40
hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90
softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940
softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(clock-AF_INET);
<Interrupt>
lock(clock-AF_INET);
*** DEADLOCK ***
5 locks held by nvme/1324:
#0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0
#1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460
#2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330
#3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp]
#4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300
stack backtrace:
CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020
Call Trace:
dump_stack+0x93/0xc2
mark_lock_irq.cold+0x2c/0xb3
? verify_lock_unused+0x390/0x390
? stack_trace_consume_entry+0x160/0x160
? lock_downgrade+0x100/0x100
? save_trace+0x88/0x5e0
? _raw_spin_unlock_irqrestore+0x2d/0x40
mark_lock+0x530/0x1470
? mark_lock_irq+0x1d10/0x1d10
? enqueue_timer+0x660/0x660
mark_usage+0x215/0x2a0
__lock_acquire+0x79b/0x18d0
? tcp_schedule_loss_probe.part.0+0x38c/0x520
lock_acquire+0x1ca/0x480
? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
? rcu_read_unlock+0x40/0x40
? tcp_mtu_probe+0x1ae0/0x1ae0
? kmalloc_reserve+0xa0/0xa0
? sysfs_file_ops+0x170/0x170
_raw_read_lock+0x3d/0xa0
? nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
nvme_tcp_state_change+0x21/0x150 [nvme_tcp]
? sysfs_file_ops+0x170/0x170
inet_shutdown+0x189/0x300
__nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp]
nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp]
nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp]
nvme_do_delete_ctrl+0x100/0x10c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x2c7/0x460
new_sync_write+0x36c/0x610
? new_sync_read+0x600/0x600
? lock_acquire+0x1ca/0x480
? rcu_read_unlock+0x40/0x40
? lock_is_held_type+0x9a/0x110
vfs_write+0x5c0/0x870
ksys_write+0xf9/0x1d0
? __ia32_sys_read+0xa0/0xa0
? lockdep_hardirqs_on_prepare.part.0+0x198/0x340
? syscall_enter_from_user_mode+0x27/0x70
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/tcp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index d658c6e8263a..218fd766dc74 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1434,7 +1434,7 @@ static void nvmet_tcp_state_change(struct sock *sk)
{
struct nvmet_tcp_queue *queue;
- write_lock_bh(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
queue = sk->sk_user_data;
if (!queue)
goto done;
@@ -1452,7 +1452,7 @@ static void nvmet_tcp_state_change(struct sock *sk)
queue->idx, sk->sk_state);
}
done:
- write_unlock_bh(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
static int nvmet_tcp_set_queue_sock(struct nvmet_tcp_queue *queue)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 386/677] clk: imx: Fix reparenting of UARTs not associated with stdout
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (384 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 385/677] nvmet-tcp: fix incorrect locking in " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 387/677] power: supply: bq25980: Move props from battery node Greg Kroah-Hartman
` (297 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aisheng Dong, Adam Ford, Abel Vesa,
Ahmad Fatoum, Sasha Levin
From: Adam Ford <aford173@gmail.com>
[ Upstream commit 379c9a24cc239000b1dec53db02fe17a86947423 ]
Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.
clk: failed to reparent uart1 to sys_pll1_80m: -16
Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.
When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.
Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/imx/clk-imx25.c | 12 +---------
drivers/clk/imx/clk-imx27.c | 13 +----------
drivers/clk/imx/clk-imx35.c | 10 +--------
drivers/clk/imx/clk-imx5.c | 30 +++----------------------
drivers/clk/imx/clk-imx6q.c | 16 +-------------
drivers/clk/imx/clk-imx6sl.c | 16 +-------------
drivers/clk/imx/clk-imx6sll.c | 24 +-------------------
drivers/clk/imx/clk-imx6sx.c | 16 +-------------
drivers/clk/imx/clk-imx7d.c | 22 +------------------
drivers/clk/imx/clk-imx7ulp.c | 31 ++------------------------
drivers/clk/imx/clk-imx8mm.c | 18 ++-------------
drivers/clk/imx/clk-imx8mn.c | 18 ++-------------
drivers/clk/imx/clk-imx8mp.c | 17 +--------------
drivers/clk/imx/clk-imx8mq.c | 18 ++-------------
drivers/clk/imx/clk.c | 41 +++++++++++++++++++++++++++--------
drivers/clk/imx/clk.h | 4 ++--
16 files changed, 54 insertions(+), 252 deletions(-)
diff --git a/drivers/clk/imx/clk-imx25.c b/drivers/clk/imx/clk-imx25.c
index a66cabfbf94f..66192fe0a898 100644
--- a/drivers/clk/imx/clk-imx25.c
+++ b/drivers/clk/imx/clk-imx25.c
@@ -73,16 +73,6 @@ enum mx25_clks {
static struct clk *clk[clk_max];
-static struct clk ** const uart_clks[] __initconst = {
- &clk[uart_ipg_per],
- &clk[uart1_ipg],
- &clk[uart2_ipg],
- &clk[uart3_ipg],
- &clk[uart4_ipg],
- &clk[uart5_ipg],
- NULL
-};
-
static int __init __mx25_clocks_init(void __iomem *ccm_base)
{
BUG_ON(!ccm_base);
@@ -228,7 +218,7 @@ static int __init __mx25_clocks_init(void __iomem *ccm_base)
*/
clk_set_parent(clk[cko_sel], clk[ipg]);
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(6);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx27.c b/drivers/clk/imx/clk-imx27.c
index 5585ded8b8c6..56a5fc402b10 100644
--- a/drivers/clk/imx/clk-imx27.c
+++ b/drivers/clk/imx/clk-imx27.c
@@ -49,17 +49,6 @@ static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
- &clk[IMX27_CLK_PER1_GATE],
- &clk[IMX27_CLK_UART1_IPG_GATE],
- &clk[IMX27_CLK_UART2_IPG_GATE],
- &clk[IMX27_CLK_UART3_IPG_GATE],
- &clk[IMX27_CLK_UART4_IPG_GATE],
- &clk[IMX27_CLK_UART5_IPG_GATE],
- &clk[IMX27_CLK_UART6_IPG_GATE],
- NULL
-};
-
static void __init _mx27_clocks_init(unsigned long fref)
{
BUG_ON(!ccm);
@@ -176,7 +165,7 @@ static void __init _mx27_clocks_init(unsigned long fref)
clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(7);
imx_print_silicon_rev("i.MX27", mx27_revision());
}
diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index c1df03665c09..0fe5ac210156 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -82,14 +82,6 @@ enum mx35_clks {
static struct clk *clk[clk_max];
-static struct clk ** const uart_clks[] __initconst = {
- &clk[ipg],
- &clk[uart1_gate],
- &clk[uart2_gate],
- &clk[uart3_gate],
- NULL
-};
-
static void __init _mx35_clocks_init(void)
{
void __iomem *base;
@@ -243,7 +235,7 @@ static void __init _mx35_clocks_init(void)
*/
clk_prepare_enable(clk[scc_gate]);
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(4);
imx_print_silicon_rev("i.MX35", mx35_revision());
}
diff --git a/drivers/clk/imx/clk-imx5.c b/drivers/clk/imx/clk-imx5.c
index 01e079b81026..e4493846454d 100644
--- a/drivers/clk/imx/clk-imx5.c
+++ b/drivers/clk/imx/clk-imx5.c
@@ -128,30 +128,6 @@ static const char *ieee1588_sels[] = { "pll3_sw", "pll4_sw", "dummy" /* usbphy2_
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks_mx51[] __initconst = {
- &clk[IMX5_CLK_UART1_IPG_GATE],
- &clk[IMX5_CLK_UART1_PER_GATE],
- &clk[IMX5_CLK_UART2_IPG_GATE],
- &clk[IMX5_CLK_UART2_PER_GATE],
- &clk[IMX5_CLK_UART3_IPG_GATE],
- &clk[IMX5_CLK_UART3_PER_GATE],
- NULL
-};
-
-static struct clk ** const uart_clks_mx50_mx53[] __initconst = {
- &clk[IMX5_CLK_UART1_IPG_GATE],
- &clk[IMX5_CLK_UART1_PER_GATE],
- &clk[IMX5_CLK_UART2_IPG_GATE],
- &clk[IMX5_CLK_UART2_PER_GATE],
- &clk[IMX5_CLK_UART3_IPG_GATE],
- &clk[IMX5_CLK_UART3_PER_GATE],
- &clk[IMX5_CLK_UART4_IPG_GATE],
- &clk[IMX5_CLK_UART4_PER_GATE],
- &clk[IMX5_CLK_UART5_IPG_GATE],
- &clk[IMX5_CLK_UART5_PER_GATE],
- NULL
-};
-
static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -382,7 +358,7 @@ static void __init mx50_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- imx_register_uart_clocks(uart_clks_mx50_mx53);
+ imx_register_uart_clocks(5);
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
@@ -488,7 +464,7 @@ static void __init mx51_clocks_init(struct device_node *np)
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
- imx_register_uart_clocks(uart_clks_mx51);
+ imx_register_uart_clocks(3);
}
CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
@@ -633,6 +609,6 @@ static void __init mx53_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- imx_register_uart_clocks(uart_clks_mx50_mx53);
+ imx_register_uart_clocks(5);
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 521d6136d22c..496900de0b0b 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -140,13 +140,6 @@ static inline int clk_on_imx6dl(void)
return of_machine_is_compatible("fsl,imx6dl");
}
-static const int uart_clk_ids[] __initconst = {
- IMX6QDL_CLK_UART_IPG,
- IMX6QDL_CLK_UART_SERIAL,
-};
-
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
-
static int ldb_di_sel_by_clock_id(int clock_id)
{
switch (clock_id) {
@@ -440,7 +433,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
struct device_node *np;
void __iomem *anatop_base, *base;
int ret;
- int i;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX6QDL_CLK_END), GFP_KERNEL);
@@ -982,12 +974,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk);
}
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(1);
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 29eab05c9068..277365970320 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -179,19 +179,11 @@ void imx6sl_set_wait_clk(bool enter)
imx6sl_enable_pll_arm(false);
}
-static const int uart_clk_ids[] __initconst = {
- IMX6SL_CLK_UART,
- IMX6SL_CLK_UART_SERIAL,
-};
-
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
-
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
int ret;
- int i;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX6SL_CLK_END), GFP_KERNEL);
@@ -448,12 +440,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
clk_set_parent(hws[IMX6SL_CLK_LCDIF_AXI_SEL]->clk,
hws[IMX6SL_CLK_PLL2_PFD2]->clk);
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(2);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c
index 8e8288bda4d0..31d777f30039 100644
--- a/drivers/clk/imx/clk-imx6sll.c
+++ b/drivers/clk/imx/clk-imx6sll.c
@@ -76,26 +76,10 @@ static u32 share_count_ssi1;
static u32 share_count_ssi2;
static u32 share_count_ssi3;
-static const int uart_clk_ids[] __initconst = {
- IMX6SLL_CLK_UART1_IPG,
- IMX6SLL_CLK_UART1_SERIAL,
- IMX6SLL_CLK_UART2_IPG,
- IMX6SLL_CLK_UART2_SERIAL,
- IMX6SLL_CLK_UART3_IPG,
- IMX6SLL_CLK_UART3_SERIAL,
- IMX6SLL_CLK_UART4_IPG,
- IMX6SLL_CLK_UART4_SERIAL,
- IMX6SLL_CLK_UART5_IPG,
- IMX6SLL_CLK_UART5_SERIAL,
-};
-
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
-
static void __init imx6sll_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX6SLL_CLK_END), GFP_KERNEL);
@@ -356,13 +340,7 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(5);
/* Lower the AHB clock rate before changing the clock source. */
clk_set_rate(hws[IMX6SLL_CLK_AHB]->clk, 99000000);
diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
index 20dcce526d07..fc1bd23d4583 100644
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -117,18 +117,10 @@ static u32 share_count_ssi3;
static u32 share_count_sai1;
static u32 share_count_sai2;
-static const int uart_clk_ids[] __initconst = {
- IMX6SX_CLK_UART_IPG,
- IMX6SX_CLK_UART_SERIAL,
-};
-
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
-
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX6SX_CLK_CLK_END), GFP_KERNEL);
@@ -556,12 +548,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clk_set_parent(hws[IMX6SX_CLK_QSPI1_SEL]->clk, hws[IMX6SX_CLK_PLL2_BUS]->clk);
clk_set_parent(hws[IMX6SX_CLK_QSPI2_SEL]->clk, hws[IMX6SX_CLK_PLL2_BUS]->clk);
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(2);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 22d24a6a05e7..c4e0f1c07192 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -377,23 +377,10 @@ static const char *pll_video_bypass_sel[] = { "pll_video_main", "pll_video_main_
static struct clk_hw **hws;
static struct clk_hw_onecell_data *clk_hw_data;
-static const int uart_clk_ids[] __initconst = {
- IMX7D_UART1_ROOT_CLK,
- IMX7D_UART2_ROOT_CLK,
- IMX7D_UART3_ROOT_CLK,
- IMX7D_UART4_ROOT_CLK,
- IMX7D_UART5_ROOT_CLK,
- IMX7D_UART6_ROOT_CLK,
- IMX7D_UART7_ROOT_CLK,
-};
-
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
-
static void __init imx7d_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX7D_CLK_END), GFP_KERNEL);
@@ -897,14 +884,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
hws[IMX7D_USB1_MAIN_480M_CLK] = imx_clk_hw_fixed_factor("pll_usb1_main_clk", "osc", 20, 1);
hws[IMX7D_USB_MAIN_480M_CLK] = imx_clk_hw_fixed_factor("pll_usb_main_clk", "osc", 20, 1);
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(7);
}
CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 634c0b6636b0..779e09105da7 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -43,19 +43,6 @@ static const struct clk_div_table ulp_div_table[] = {
{ /* sentinel */ },
};
-static const int pcc2_uart_clk_ids[] __initconst = {
- IMX7ULP_CLK_LPUART4,
- IMX7ULP_CLK_LPUART5,
-};
-
-static const int pcc3_uart_clk_ids[] __initconst = {
- IMX7ULP_CLK_LPUART6,
- IMX7ULP_CLK_LPUART7,
-};
-
-static struct clk **pcc2_uart_clks[ARRAY_SIZE(pcc2_uart_clk_ids) + 1] __initdata;
-static struct clk **pcc3_uart_clks[ARRAY_SIZE(pcc3_uart_clk_ids) + 1] __initdata;
-
static void __init imx7ulp_clk_scg1_init(struct device_node *np)
{
struct clk_hw_onecell_data *clk_data;
@@ -150,7 +137,6 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
struct clk_hw_onecell_data *clk_data;
struct clk_hw **hws;
void __iomem *base;
- int i;
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC2_END),
GFP_KERNEL);
@@ -190,13 +176,7 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
- for (i = 0; i < ARRAY_SIZE(pcc2_uart_clk_ids); i++) {
- int index = pcc2_uart_clk_ids[i];
-
- pcc2_uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(pcc2_uart_clks);
+ imx_register_uart_clocks(2);
}
CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
@@ -205,7 +185,6 @@ static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
struct clk_hw_onecell_data *clk_data;
struct clk_hw **hws;
void __iomem *base;
- int i;
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC3_END),
GFP_KERNEL);
@@ -244,13 +223,7 @@ static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
- for (i = 0; i < ARRAY_SIZE(pcc3_uart_clk_ids); i++) {
- int index = pcc3_uart_clk_ids[i];
-
- pcc3_uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(pcc3_uart_clks);
+ imx_register_uart_clocks(7);
}
CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 6a01eec36dd0..f1919fafb124 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -296,20 +296,12 @@ static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "
static struct clk_hw_onecell_data *clk_hw_data;
static struct clk_hw **hws;
-static const int uart_clk_ids[] = {
- IMX8MM_CLK_UART1_ROOT,
- IMX8MM_CLK_UART2_ROOT,
- IMX8MM_CLK_UART3_ROOT,
- IMX8MM_CLK_UART4_ROOT,
-};
-static struct clk **uart_hws[ARRAY_SIZE(uart_clk_ids) + 1];
-
static int imx8mm_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
- int ret, i;
+ int ret;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX8MM_CLK_END), GFP_KERNEL);
@@ -634,13 +626,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
goto unregister_hws;
}
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_hws[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_hws);
+ imx_register_uart_clocks(4);
return 0;
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 324c5fd0aa04..88f6630cd472 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -289,20 +289,12 @@ static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "
static struct clk_hw_onecell_data *clk_hw_data;
static struct clk_hw **hws;
-static const int uart_clk_ids[] = {
- IMX8MN_CLK_UART1_ROOT,
- IMX8MN_CLK_UART2_ROOT,
- IMX8MN_CLK_UART3_ROOT,
- IMX8MN_CLK_UART4_ROOT,
-};
-static struct clk **uart_hws[ARRAY_SIZE(uart_clk_ids) + 1];
-
static int imx8mn_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
- int ret, i;
+ int ret;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX8MN_CLK_END), GFP_KERNEL);
@@ -585,13 +577,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
goto unregister_hws;
}
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_hws[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_hws);
+ imx_register_uart_clocks(4);
return 0;
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index 2f4e1d674e1c..3e6557e7d559 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -414,20 +414,11 @@ static const char * const imx8mp_dram_core_sels[] = {"dram_pll_out", "dram_alt_r
static struct clk_hw **hws;
static struct clk_hw_onecell_data *clk_hw_data;
-static const int uart_clk_ids[] = {
- IMX8MP_CLK_UART1_ROOT,
- IMX8MP_CLK_UART2_ROOT,
- IMX8MP_CLK_UART3_ROOT,
- IMX8MP_CLK_UART4_ROOT,
-};
-static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1];
-
static int imx8mp_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
void __iomem *anatop_base, *ccm_base;
- int i;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mp-anatop");
anatop_base = of_iomap(np, 0);
@@ -737,13 +728,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_clks[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_clks);
+ imx_register_uart_clocks(4);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 4dd4ae9d022b..3e1a10d3f55c 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -281,20 +281,12 @@ static const char * const pllout_monitor_sels[] = {"osc_25m", "osc_27m", "dummy"
static struct clk_hw_onecell_data *clk_hw_data;
static struct clk_hw **hws;
-static const int uart_clk_ids[] = {
- IMX8MQ_CLK_UART1_ROOT,
- IMX8MQ_CLK_UART2_ROOT,
- IMX8MQ_CLK_UART3_ROOT,
- IMX8MQ_CLK_UART4_ROOT,
-};
-static struct clk **uart_hws[ARRAY_SIZE(uart_clk_ids) + 1];
-
static int imx8mq_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
- int err, i;
+ int err;
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
IMX8MQ_CLK_END), GFP_KERNEL);
@@ -629,13 +621,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
goto unregister_hws;
}
- for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
- int index = uart_clk_ids[i];
-
- uart_hws[i] = &hws[index]->clk;
- }
-
- imx_register_uart_clocks(uart_hws);
+ imx_register_uart_clocks(4);
return 0;
diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
index 47882c51cb85..7cc669934253 100644
--- a/drivers/clk/imx/clk.c
+++ b/drivers/clk/imx/clk.c
@@ -147,8 +147,10 @@ void imx_cscmr1_fixup(u32 *val)
}
#ifndef MODULE
-static int imx_keep_uart_clocks;
-static struct clk ** const *imx_uart_clocks;
+
+static bool imx_keep_uart_clocks;
+static int imx_enabled_uart_clocks;
+static struct clk **imx_uart_clocks;
static int __init imx_keep_uart_clocks_param(char *str)
{
@@ -161,24 +163,45 @@ __setup_param("earlycon", imx_keep_uart_earlycon,
__setup_param("earlyprintk", imx_keep_uart_earlyprintk,
imx_keep_uart_clocks_param, 0);
-void imx_register_uart_clocks(struct clk ** const clks[])
+void imx_register_uart_clocks(unsigned int clk_count)
{
+ imx_enabled_uart_clocks = 0;
+
+/* i.MX boards use device trees now. For build tests without CONFIG_OF, do nothing */
+#ifdef CONFIG_OF
if (imx_keep_uart_clocks) {
int i;
- imx_uart_clocks = clks;
- for (i = 0; imx_uart_clocks[i]; i++)
- clk_prepare_enable(*imx_uart_clocks[i]);
+ imx_uart_clocks = kcalloc(clk_count, sizeof(struct clk *), GFP_KERNEL);
+
+ if (!of_stdout)
+ return;
+
+ for (i = 0; i < clk_count; i++) {
+ imx_uart_clocks[imx_enabled_uart_clocks] = of_clk_get(of_stdout, i);
+
+ /* Stop if there are no more of_stdout references */
+ if (IS_ERR(imx_uart_clocks[imx_enabled_uart_clocks]))
+ return;
+
+ /* Only enable the clock if it's not NULL */
+ if (imx_uart_clocks[imx_enabled_uart_clocks])
+ clk_prepare_enable(imx_uart_clocks[imx_enabled_uart_clocks++]);
+ }
}
+#endif
}
static int __init imx_clk_disable_uart(void)
{
- if (imx_keep_uart_clocks && imx_uart_clocks) {
+ if (imx_keep_uart_clocks && imx_enabled_uart_clocks) {
int i;
- for (i = 0; imx_uart_clocks[i]; i++)
- clk_disable_unprepare(*imx_uart_clocks[i]);
+ for (i = 0; i < imx_enabled_uart_clocks; i++) {
+ clk_disable_unprepare(imx_uart_clocks[i]);
+ clk_put(imx_uart_clocks[i]);
+ }
+ kfree(imx_uart_clocks);
}
return 0;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 4f04c8287286..7571603bee23 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -11,9 +11,9 @@ extern spinlock_t imx_ccm_lock;
void imx_check_clocks(struct clk *clks[], unsigned int count);
void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count);
#ifndef MODULE
-void imx_register_uart_clocks(struct clk ** const clks[]);
+void imx_register_uart_clocks(unsigned int clk_count);
#else
-static inline void imx_register_uart_clocks(struct clk ** const clks[])
+static inline void imx_register_uart_clocks(unsigned int clk_count)
{
}
#endif
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 387/677] power: supply: bq25980: Move props from battery node
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (385 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 386/677] clk: imx: Fix reparenting of UARTs not associated with stdout Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 388/677] nvme: retrigger ANA log update if group descriptor isnt found Greg Kroah-Hartman
` (296 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ricardo Rivera-Matos,
Sebastian Reichel, Sasha Levin
From: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
[ Upstream commit 04722cec1436c732d39153ce6ae2ebf71ac3ade7 ]
Currently POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT and
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE are exposed on
the battery node and this is incorrect.
This patch exposes both of them on the charger node rather
than the battery node.
Fixes: 5069185fc18e ("power: supply: bq25980: Add support for the BQ259xx family")
Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/bq25980_charger.c | 40 ++++++++------------------
1 file changed, 12 insertions(+), 28 deletions(-)
diff --git a/drivers/power/supply/bq25980_charger.c b/drivers/power/supply/bq25980_charger.c
index 530ff4025b31..0008c229fd9c 100644
--- a/drivers/power/supply/bq25980_charger.c
+++ b/drivers/power/supply/bq25980_charger.c
@@ -606,33 +606,6 @@ static int bq25980_get_state(struct bq25980_device *bq,
return 0;
}
-static int bq25980_set_battery_property(struct power_supply *psy,
- enum power_supply_property psp,
- const union power_supply_propval *val)
-{
- struct bq25980_device *bq = power_supply_get_drvdata(psy);
- int ret = 0;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
- ret = bq25980_set_const_charge_curr(bq, val->intval);
- if (ret)
- return ret;
- break;
-
- case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
- ret = bq25980_set_const_charge_volt(bq, val->intval);
- if (ret)
- return ret;
- break;
-
- default:
- return -EINVAL;
- }
-
- return ret;
-}
-
static int bq25980_get_battery_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -701,6 +674,18 @@ static int bq25980_set_charger_property(struct power_supply *psy,
return ret;
break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq25980_set_const_charge_curr(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq25980_set_const_charge_volt(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
default:
return -EINVAL;
}
@@ -922,7 +907,6 @@ static struct power_supply_desc bq25980_battery_desc = {
.name = "bq25980-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.get_property = bq25980_get_battery_property,
- .set_property = bq25980_set_battery_property,
.properties = bq25980_battery_props,
.num_properties = ARRAY_SIZE(bq25980_battery_props),
.property_is_writeable = bq25980_property_is_writeable,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 388/677] nvme: retrigger ANA log update if group descriptor isnt found
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (386 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 387/677] power: supply: bq25980: Move props from battery node Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 389/677] media: ccs: Fix sub-device function Greg Kroah-Hartman
` (295 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin George, Hannes Reinecke,
Keith Busch, Sagi Grimberg, Christoph Hellwig, Sasha Levin
From: Hannes Reinecke <hare@suse.de>
[ Upstream commit dd8f7fa908f66dd44abcd83cbb50410524b9f8ef ]
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes: 32acab3181c7 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/multipath.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index a1d476e1ac02..ec1e454848e5 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -668,6 +668,10 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id)
if (desc.state) {
/* found the group desc: update */
nvme_update_ns_ana_state(&desc, ns);
+ } else {
+ /* group desc not found: trigger a re-read */
+ set_bit(NVME_NS_ANA_PENDING, &ns->flags);
+ queue_work(nvme_wq, &ns->ctrl->ana_work);
}
} else {
ns->ana_state = NVME_ANA_OPTIMIZED;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 389/677] media: ccs: Fix sub-device function
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (387 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 388/677] nvme: retrigger ANA log update if group descriptor isnt found Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 390/677] media: ipu3-cio2: Fix pixel-rate derived link frequency Greg Kroah-Hartman
` (294 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
From: Sakari Ailus <sakari.ailus@linux.intel.com>
[ Upstream commit 8c43126e8c9f0990fa75fb5219c03b20d5ead7b7 ]
Fix sub-device function for the pixel array and the scaler.
It seems that the pixel array had gotten assigned as SCALER whereas the
scaler had CAM_SENSOR function. Fix this by setting the pixel array
function to CAM_SENSOR and that of scaler to SCALER.
Fixes: 9ec2ac9bd0f9 ("media: ccs: Give all subdevs a function")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ccs/ccs-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index 15afbb4f5b31..4505594996bd 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -3522,11 +3522,11 @@ static int ccs_probe(struct i2c_client *client)
sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN);
ccs_create_subdev(sensor, sensor->scaler, " scaler", 2,
- MEDIA_ENT_F_CAM_SENSOR);
+ MEDIA_ENT_F_PROC_VIDEO_SCALER);
ccs_create_subdev(sensor, sensor->binner, " binner", 2,
MEDIA_ENT_F_PROC_VIDEO_SCALER);
ccs_create_subdev(sensor, sensor->pixel_array, " pixel_array", 1,
- MEDIA_ENT_F_PROC_VIDEO_SCALER);
+ MEDIA_ENT_F_CAM_SENSOR);
rval = ccs_init_controls(sensor);
if (rval < 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 390/677] media: ipu3-cio2: Fix pixel-rate derived link frequency
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (388 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 389/677] media: ccs: Fix sub-device function Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 391/677] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Greg Kroah-Hartman
` (293 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Laurent Pinchart, Sakari Ailus,
Bingbu Cao, Mauro Carvalho Chehab, Sasha Levin
From: Sakari Ailus <sakari.ailus@linux.intel.com>
[ Upstream commit a7de6eac6f6f73d48d97a6c93032107775f4593b ]
The driver uses v4l2_get_link_freq() helper to obtain the link frequency
using the LINK_FREQ but also the PIXEL_RATE control. The divisor for the
pixel rate derived link frequency was wrong, missing the bus uses double
data rate. Fix this.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 4b6c129e87a3 ("media: ipu3-cio2: Use v4l2_get_link_freq helper")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index 6e8c0c230e11..fecef85bd62e 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -302,7 +302,7 @@ static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q,
if (!q->sensor)
return -ENODEV;
- freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes);
+ freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes * 2);
if (freq < 0) {
dev_err(dev, "error %lld, invalid link_freq\n", freq);
return freq;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 391/677] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (389 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 390/677] media: ipu3-cio2: Fix pixel-rate derived link frequency Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 392/677] media: i2c: imx219: Balance runtime PM use-count Greg Kroah-Hartman
` (292 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Machek, Lad Prabhakar,
Laurent Pinchart, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
[ Upstream commit 745d4612d2c853c00abadbf69799c8aee7f99c39 ]
Move out locking/unlocking of vflip and hflip controls from
imx219_set_stream() to the imx219_start_streaming()/
imx219_stop_streaming() respectively.
This fixes an issue in resume callback error path where streaming is
stopped and the controls are left in locked state.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/imx219.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 6e3382b85a90..82756cbfbaac 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1056,8 +1056,16 @@ static int imx219_start_streaming(struct imx219 *imx219)
return ret;
/* set stream on register */
- return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
- IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
+ ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
+ IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
+ if (ret)
+ return ret;
+
+ /* vflip and hflip cannot change during streaming */
+ __v4l2_ctrl_grab(imx219->vflip, true);
+ __v4l2_ctrl_grab(imx219->hflip, true);
+
+ return 0;
}
static void imx219_stop_streaming(struct imx219 *imx219)
@@ -1070,6 +1078,9 @@ static void imx219_stop_streaming(struct imx219 *imx219)
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
if (ret)
dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+ __v4l2_ctrl_grab(imx219->vflip, false);
+ __v4l2_ctrl_grab(imx219->hflip, false);
}
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
@@ -1105,10 +1116,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
imx219->streaming = enable;
- /* vflip and hflip cannot change during streaming */
- __v4l2_ctrl_grab(imx219->vflip, enable);
- __v4l2_ctrl_grab(imx219->hflip, enable);
-
mutex_unlock(&imx219->mutex);
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 392/677] media: i2c: imx219: Balance runtime PM use-count
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (390 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 391/677] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 393/677] media: v4l2-ctrls.c: fix race condition in hdl->requests list Greg Kroah-Hartman
` (291 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Machek, Lad Prabhakar,
Laurent Pinchart, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
[ Upstream commit dd90caa0111e178b52b21e56364bc2244a3973b3 ]
Move incrementing/decrementing runtime PM count to
imx219_start_streaming()/imx219_stop_streaming() functions respectively.
This fixes an issue of unbalanced runtime PM count in resume callback
error path where streaming is stopped and runtime PM count is left
unbalanced.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/imx219.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 82756cbfbaac..49ba39418360 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1035,37 +1035,47 @@ static int imx219_start_streaming(struct imx219 *imx219)
const struct imx219_reg_list *reg_list;
int ret;
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ return ret;
+ }
+
/* Apply default values of current mode */
reg_list = &imx219->mode->reg_list;
ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
if (ret) {
dev_err(&client->dev, "%s failed to set mode\n", __func__);
- return ret;
+ goto err_rpm_put;
}
ret = imx219_set_framefmt(imx219);
if (ret) {
dev_err(&client->dev, "%s failed to set frame format: %d\n",
__func__, ret);
- return ret;
+ goto err_rpm_put;
}
/* Apply customized values from user */
ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
if (ret)
- return ret;
+ goto err_rpm_put;
/* set stream on register */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
if (ret)
- return ret;
+ goto err_rpm_put;
/* vflip and hflip cannot change during streaming */
__v4l2_ctrl_grab(imx219->vflip, true);
__v4l2_ctrl_grab(imx219->hflip, true);
return 0;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+ return ret;
}
static void imx219_stop_streaming(struct imx219 *imx219)
@@ -1081,12 +1091,13 @@ static void imx219_stop_streaming(struct imx219 *imx219)
__v4l2_ctrl_grab(imx219->vflip, false);
__v4l2_ctrl_grab(imx219->hflip, false);
+
+ pm_runtime_put(&client->dev);
}
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx219 *imx219 = to_imx219(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
mutex_lock(&imx219->mutex);
@@ -1096,22 +1107,15 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
}
if (enable) {
- ret = pm_runtime_get_sync(&client->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(&client->dev);
- goto err_unlock;
- }
-
/*
* Apply default & customized values
* and then start streaming.
*/
ret = imx219_start_streaming(imx219);
if (ret)
- goto err_rpm_put;
+ goto err_unlock;
} else {
imx219_stop_streaming(imx219);
- pm_runtime_put(&client->dev);
}
imx219->streaming = enable;
@@ -1120,8 +1124,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
-err_rpm_put:
- pm_runtime_put(&client->dev);
err_unlock:
mutex_unlock(&imx219->mutex);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 393/677] media: v4l2-ctrls.c: fix race condition in hdl->requests list
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (391 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 392/677] media: i2c: imx219: Balance runtime PM use-count Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 394/677] media: rkvdec: Do not require all controls to be present in every request Greg Kroah-Hartman
` (290 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans Verkuil, John Cox,
Mauro Carvalho Chehab, Sasha Levin
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Upstream commit be7e8af98f3af729aa9f08b1053f9533a5cceb91 ]
When a request is re-inited it will release all control handler
objects that are still in the request. It does that by unbinding
and putting all those objects. When the object is unbound the
obj->req pointer is set to NULL, and the object's unbind op is
called. When the object it put the object's release op is called
to free the memory.
For a request object that contains a control handler that means
that v4l2_ctrl_handler_free() is called in the release op.
A control handler used in a request has a pointer to the main
control handler that is created by the driver and contains the
current state of all controls. If the device is unbound (due to
rmmod or a forced unbind), then that main handler is freed, again
by calling v4l2_ctrl_handler_free(), and any outstanding request
objects that refer to that main handler have to be unbound and put
as well.
It does that by this test:
if (!hdl->req_obj.req && !list_empty(&hdl->requests)) {
I.e. the handler has no pointer to a request, so is the main
handler, and one or more request objects refer to this main
handler.
However, this test is wrong since hdl->req_obj.req is actually
NULL when re-initing a request (the object unbind will set req to
NULL), and the only reason this seemingly worked is that the
requests list is typically empty since the request's unbind op
will remove the handler from the requests list.
But if another thread is at the same time adding a new control
to a request, then there is a race condition where one thread
is removing a control handler object from the requests list and
another thread is adding one. The result is that hdl->requests
is no longer empty and the code thinks that a main handler is
being freed instead of a control handler that is part of a request.
There are two bugs here: first the test for hdl->req_obj.req: this
should be hdl->req_obj.ops since only the main control handler will
have a NULL pointer there.
The second is that adding or deleting request objects from the
requests list of the main handler isn't protected by taking the
main handler's lock.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: John Cox <jc@kynesim.co.uk>
Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Tested-by: John Cox <jc@kynesim.co.uk>
Reported-by: John Cox <jc@kynesim.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/v4l2-core/v4l2-ctrls.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 4f0209695f13..6219c8185782 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -2552,7 +2552,15 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
if (hdl == NULL || hdl->buckets == NULL)
return;
- if (!hdl->req_obj.req && !list_empty(&hdl->requests)) {
+ /*
+ * If the main handler is freed and it is used by handler objects in
+ * outstanding requests, then unbind and put those objects before
+ * freeing the main handler.
+ *
+ * The main handler can be identified by having a NULL ops pointer in
+ * the request object.
+ */
+ if (!hdl->req_obj.ops && !list_empty(&hdl->requests)) {
struct v4l2_ctrl_handler *req, *next_req;
list_for_each_entry_safe(req, next_req, &hdl->requests, requests) {
@@ -3595,8 +3603,8 @@ static void v4l2_ctrl_request_unbind(struct media_request_object *obj)
container_of(obj, struct v4l2_ctrl_handler, req_obj);
struct v4l2_ctrl_handler *main_hdl = obj->priv;
- list_del_init(&hdl->requests);
mutex_lock(main_hdl->lock);
+ list_del_init(&hdl->requests);
if (hdl->request_is_queued) {
list_del_init(&hdl->requests_queued);
hdl->request_is_queued = false;
@@ -3655,8 +3663,11 @@ static int v4l2_ctrl_request_bind(struct media_request *req,
if (!ret) {
ret = media_request_object_bind(req, &req_ops,
from, false, &hdl->req_obj);
- if (!ret)
+ if (!ret) {
+ mutex_lock(from->lock);
list_add_tail(&hdl->requests, &from->requests);
+ mutex_unlock(from->lock);
+ }
}
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 394/677] media: rkvdec: Do not require all controls to be present in every request
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (392 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 393/677] media: v4l2-ctrls.c: fix race condition in hdl->requests list Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 395/677] vfio/fsl-mc: Re-order vfio_fsl_mc_probe() Greg Kroah-Hartman
` (289 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Almeida, Ezequiel Garcia,
Hans Verkuil, Mauro Carvalho Chehab, Sasha Levin
From: Daniel Almeida <daniel.almeida@collabora.com>
[ Upstream commit 54676d5f5630b79f7b00c7c43882a58c1815aaf9 ]
According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.
Remove it.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/media/rkvdec/rkvdec.c | 48 +--------------------------
drivers/staging/media/rkvdec/rkvdec.h | 1 -
2 files changed, 1 insertion(+), 48 deletions(-)
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index d3eb81ee8dc2..5f0219d117fb 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -55,16 +55,13 @@ static const struct v4l2_ctrl_ops rkvdec_ctrl_ops = {
static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
{
- .mandatory = true,
.cfg.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
},
{
- .mandatory = true,
.cfg.id = V4L2_CID_STATELESS_H264_SPS,
.cfg.ops = &rkvdec_ctrl_ops,
},
{
- .mandatory = true,
.cfg.id = V4L2_CID_STATELESS_H264_PPS,
},
{
@@ -585,25 +582,7 @@ static const struct vb2_ops rkvdec_queue_ops = {
static int rkvdec_request_validate(struct media_request *req)
{
- struct media_request_object *obj;
- const struct rkvdec_ctrls *ctrls;
- struct v4l2_ctrl_handler *hdl;
- struct rkvdec_ctx *ctx = NULL;
- unsigned int count, i;
- int ret;
-
- list_for_each_entry(obj, &req->objects, list) {
- if (vb2_request_object_is_buffer(obj)) {
- struct vb2_buffer *vb;
-
- vb = container_of(obj, struct vb2_buffer, req_obj);
- ctx = vb2_get_drv_priv(vb->vb2_queue);
- break;
- }
- }
-
- if (!ctx)
- return -EINVAL;
+ unsigned int count;
count = vb2_request_buffer_cnt(req);
if (!count)
@@ -611,31 +590,6 @@ static int rkvdec_request_validate(struct media_request *req)
else if (count > 1)
return -EINVAL;
- hdl = v4l2_ctrl_request_hdl_find(req, &ctx->ctrl_hdl);
- if (!hdl)
- return -ENOENT;
-
- ret = 0;
- ctrls = ctx->coded_fmt_desc->ctrls;
- for (i = 0; ctrls && i < ctrls->num_ctrls; i++) {
- u32 id = ctrls->ctrls[i].cfg.id;
- struct v4l2_ctrl *ctrl;
-
- if (!ctrls->ctrls[i].mandatory)
- continue;
-
- ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl, id);
- if (!ctrl) {
- ret = -ENOENT;
- break;
- }
- }
-
- v4l2_ctrl_request_hdl_put(hdl);
-
- if (ret)
- return ret;
-
return vb2_request_validate(req);
}
diff --git a/drivers/staging/media/rkvdec/rkvdec.h b/drivers/staging/media/rkvdec/rkvdec.h
index 77a137cca88e..52ac3874c5e5 100644
--- a/drivers/staging/media/rkvdec/rkvdec.h
+++ b/drivers/staging/media/rkvdec/rkvdec.h
@@ -25,7 +25,6 @@
struct rkvdec_ctx;
struct rkvdec_ctrl_desc {
- u32 mandatory : 1;
struct v4l2_ctrl_config cfg;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 395/677] vfio/fsl-mc: Re-order vfio_fsl_mc_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (393 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 394/677] media: rkvdec: Do not require all controls to be present in every request Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 396/677] vfio/pci: Move VGA and VF initialization to functions Greg Kroah-Hartman
` (288 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gunthorpe, Alex Williamson,
Sasha Levin, Diana Craciun OSS
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 2b1fe162e584a88ec7f12a651a2a50f94dd8cfac ]
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_fsl_mc_reflck_attach() sets vdev->reflck and
vfio_fsl_mc_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
This driver started life with the right sequence, but two commits added
stuff after vfio_add_group_dev().
Fixes: 2e0d29561f59 ("vfio/fsl-mc: Add irq infrastructure for fsl-mc devices")
Fixes: f2ba7e8c947b ("vfio/fsl-mc: Added lock support in preparation for interrupt handling")
Co-developed-by: Diana Craciun OSS <diana.craciun@oss.nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <5-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/fsl-mc/vfio_fsl_mc.c | 74 ++++++++++++++++++++-----------
1 file changed, 47 insertions(+), 27 deletions(-)
diff --git a/drivers/vfio/fsl-mc/vfio_fsl_mc.c b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
index f27e25112c40..8722f5effacd 100644
--- a/drivers/vfio/fsl-mc/vfio_fsl_mc.c
+++ b/drivers/vfio/fsl-mc/vfio_fsl_mc.c
@@ -568,23 +568,39 @@ static int vfio_fsl_mc_init_device(struct vfio_fsl_mc_device *vdev)
dev_err(&mc_dev->dev, "VFIO_FSL_MC: Failed to setup DPRC (%d)\n", ret);
goto out_nc_unreg;
}
+ return 0;
+
+out_nc_unreg:
+ bus_unregister_notifier(&fsl_mc_bus_type, &vdev->nb);
+ return ret;
+}
+static int vfio_fsl_mc_scan_container(struct fsl_mc_device *mc_dev)
+{
+ int ret;
+
+ /* non dprc devices do not scan for other devices */
+ if (!is_fsl_mc_bus_dprc(mc_dev))
+ return 0;
ret = dprc_scan_container(mc_dev, false);
if (ret) {
- dev_err(&mc_dev->dev, "VFIO_FSL_MC: Container scanning failed (%d)\n", ret);
- goto out_dprc_cleanup;
+ dev_err(&mc_dev->dev,
+ "VFIO_FSL_MC: Container scanning failed (%d)\n", ret);
+ dprc_remove_devices(mc_dev, NULL, 0);
+ return ret;
}
-
return 0;
+}
+
+static void vfio_fsl_uninit_device(struct vfio_fsl_mc_device *vdev)
+{
+ struct fsl_mc_device *mc_dev = vdev->mc_dev;
+
+ if (!is_fsl_mc_bus_dprc(mc_dev))
+ return;
-out_dprc_cleanup:
- dprc_remove_devices(mc_dev, NULL, 0);
dprc_cleanup(mc_dev);
-out_nc_unreg:
bus_unregister_notifier(&fsl_mc_bus_type, &vdev->nb);
- vdev->nb.notifier_call = NULL;
-
- return ret;
}
static int vfio_fsl_mc_probe(struct fsl_mc_device *mc_dev)
@@ -607,29 +623,39 @@ static int vfio_fsl_mc_probe(struct fsl_mc_device *mc_dev)
}
vdev->mc_dev = mc_dev;
-
- ret = vfio_add_group_dev(dev, &vfio_fsl_mc_ops, vdev);
- if (ret) {
- dev_err(dev, "VFIO_FSL_MC: Failed to add to vfio group\n");
- goto out_group_put;
- }
+ mutex_init(&vdev->igate);
ret = vfio_fsl_mc_reflck_attach(vdev);
if (ret)
- goto out_group_dev;
+ goto out_group_put;
ret = vfio_fsl_mc_init_device(vdev);
if (ret)
goto out_reflck;
- mutex_init(&vdev->igate);
+ ret = vfio_add_group_dev(dev, &vfio_fsl_mc_ops, vdev);
+ if (ret) {
+ dev_err(dev, "VFIO_FSL_MC: Failed to add to vfio group\n");
+ goto out_device;
+ }
+ /*
+ * This triggers recursion into vfio_fsl_mc_probe() on another device
+ * and the vfio_fsl_mc_reflck_attach() must succeed, which relies on the
+ * vfio_add_group_dev() above. It has no impact on this vdev, so it is
+ * safe to be after the vfio device is made live.
+ */
+ ret = vfio_fsl_mc_scan_container(mc_dev);
+ if (ret)
+ goto out_group_dev;
return 0;
-out_reflck:
- vfio_fsl_mc_reflck_put(vdev->reflck);
out_group_dev:
vfio_del_group_dev(dev);
+out_device:
+ vfio_fsl_uninit_device(vdev);
+out_reflck:
+ vfio_fsl_mc_reflck_put(vdev->reflck);
out_group_put:
vfio_iommu_group_put(group, dev);
return ret;
@@ -646,16 +672,10 @@ static int vfio_fsl_mc_remove(struct fsl_mc_device *mc_dev)
mutex_destroy(&vdev->igate);
+ dprc_remove_devices(mc_dev, NULL, 0);
+ vfio_fsl_uninit_device(vdev);
vfio_fsl_mc_reflck_put(vdev->reflck);
- if (is_fsl_mc_bus_dprc(mc_dev)) {
- dprc_remove_devices(mc_dev, NULL, 0);
- dprc_cleanup(mc_dev);
- }
-
- if (vdev->nb.notifier_call)
- bus_unregister_notifier(&fsl_mc_bus_type, &vdev->nb);
-
vfio_iommu_group_put(mc_dev->dev.iommu_group, dev);
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 396/677] vfio/pci: Move VGA and VF initialization to functions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (394 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 395/677] vfio/fsl-mc: Re-order vfio_fsl_mc_probe() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 397/677] vfio/pci: Re-order vfio_pci_probe() Greg Kroah-Hartman
` (287 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Kevin Tian,
Max Gurtovoy, Cornelia Huck, Eric Auger, Jason Gunthorpe,
Alex Williamson, Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 61e90817482871b614133c0f20feb1aba2faec86 ]
vfio_pci_probe() is quite complicated, with optional VF and VGA sub
components. Move these into clear init/uninit functions and have a linear
flow in probe/remove.
This fixes a few little buglets:
- vfio_pci_remove() is in the wrong order, vga_client_register() removes
a notifier and is after kfree(vdev), but the notifier refers to vdev,
so it can use after free in a race.
- vga_client_register() can fail but was ignored
Organize things so destruction order is the reverse of creation order.
Fixes: ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <7-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/pci/vfio_pci.c | 116 +++++++++++++++++++++++-------------
1 file changed, 74 insertions(+), 42 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 5023e23db3bc..b73144a6804a 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1924,6 +1924,68 @@ static int vfio_pci_bus_notifier(struct notifier_block *nb,
return 0;
}
+static int vfio_pci_vf_init(struct vfio_pci_device *vdev)
+{
+ struct pci_dev *pdev = vdev->pdev;
+ int ret;
+
+ if (!pdev->is_physfn)
+ return 0;
+
+ vdev->vf_token = kzalloc(sizeof(*vdev->vf_token), GFP_KERNEL);
+ if (!vdev->vf_token)
+ return -ENOMEM;
+
+ mutex_init(&vdev->vf_token->lock);
+ uuid_gen(&vdev->vf_token->uuid);
+
+ vdev->nb.notifier_call = vfio_pci_bus_notifier;
+ ret = bus_register_notifier(&pci_bus_type, &vdev->nb);
+ if (ret) {
+ kfree(vdev->vf_token);
+ return ret;
+ }
+ return 0;
+}
+
+static void vfio_pci_vf_uninit(struct vfio_pci_device *vdev)
+{
+ if (!vdev->vf_token)
+ return;
+
+ bus_unregister_notifier(&pci_bus_type, &vdev->nb);
+ WARN_ON(vdev->vf_token->users);
+ mutex_destroy(&vdev->vf_token->lock);
+ kfree(vdev->vf_token);
+}
+
+static int vfio_pci_vga_init(struct vfio_pci_device *vdev)
+{
+ struct pci_dev *pdev = vdev->pdev;
+ int ret;
+
+ if (!vfio_pci_is_vga(pdev))
+ return 0;
+
+ ret = vga_client_register(pdev, vdev, NULL, vfio_pci_set_vga_decode);
+ if (ret)
+ return ret;
+ vga_set_legacy_decoding(pdev, vfio_pci_set_vga_decode(vdev, false));
+ return 0;
+}
+
+static void vfio_pci_vga_uninit(struct vfio_pci_device *vdev)
+{
+ struct pci_dev *pdev = vdev->pdev;
+
+ if (!vfio_pci_is_vga(pdev))
+ return;
+ vga_client_register(pdev, NULL, NULL, NULL);
+ vga_set_legacy_decoding(pdev, VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
+ VGA_RSRC_LEGACY_IO |
+ VGA_RSRC_LEGACY_MEM);
+}
+
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct vfio_pci_device *vdev;
@@ -1977,28 +2039,12 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ret = vfio_pci_reflck_attach(vdev);
if (ret)
goto out_del_group_dev;
-
- if (pdev->is_physfn) {
- vdev->vf_token = kzalloc(sizeof(*vdev->vf_token), GFP_KERNEL);
- if (!vdev->vf_token) {
- ret = -ENOMEM;
- goto out_reflck;
- }
-
- mutex_init(&vdev->vf_token->lock);
- uuid_gen(&vdev->vf_token->uuid);
-
- vdev->nb.notifier_call = vfio_pci_bus_notifier;
- ret = bus_register_notifier(&pci_bus_type, &vdev->nb);
- if (ret)
- goto out_vf_token;
- }
-
- if (vfio_pci_is_vga(pdev)) {
- vga_client_register(pdev, vdev, NULL, vfio_pci_set_vga_decode);
- vga_set_legacy_decoding(pdev,
- vfio_pci_set_vga_decode(vdev, false));
- }
+ ret = vfio_pci_vf_init(vdev);
+ if (ret)
+ goto out_reflck;
+ ret = vfio_pci_vga_init(vdev);
+ if (ret)
+ goto out_vf;
vfio_pci_probe_power_state(vdev);
@@ -2018,8 +2064,8 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return ret;
-out_vf_token:
- kfree(vdev->vf_token);
+out_vf:
+ vfio_pci_vf_uninit(vdev);
out_reflck:
vfio_pci_reflck_put(vdev->reflck);
out_del_group_dev:
@@ -2041,33 +2087,19 @@ static void vfio_pci_remove(struct pci_dev *pdev)
if (!vdev)
return;
- if (vdev->vf_token) {
- WARN_ON(vdev->vf_token->users);
- mutex_destroy(&vdev->vf_token->lock);
- kfree(vdev->vf_token);
- }
-
- if (vdev->nb.notifier_call)
- bus_unregister_notifier(&pci_bus_type, &vdev->nb);
-
+ vfio_pci_vf_uninit(vdev);
vfio_pci_reflck_put(vdev->reflck);
+ vfio_pci_vga_uninit(vdev);
vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
- kfree(vdev->region);
- mutex_destroy(&vdev->ioeventfds_lock);
if (!disable_idle_d3)
vfio_pci_set_power_state(vdev, PCI_D0);
+ mutex_destroy(&vdev->ioeventfds_lock);
+ kfree(vdev->region);
kfree(vdev->pm_save);
kfree(vdev);
-
- if (vfio_pci_is_vga(pdev)) {
- vga_client_register(pdev, NULL, NULL, NULL);
- vga_set_legacy_decoding(pdev,
- VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
- VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM);
- }
}
static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 397/677] vfio/pci: Re-order vfio_pci_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (395 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 396/677] vfio/pci: Move VGA and VF initialization to functions Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 398/677] drm/msm: Fix debugfs deadlock Greg Kroah-Hartman
` (286 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Max Gurtovoy,
Kevin Tian, Cornelia Huck, Eric Auger, Jason Gunthorpe,
Alex Williamson, Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 4aeec3984ddc853f7c65903bde472ffdef738bae ]
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_pci_reflck_attach() sets vdev->reflck and
vfio_pci_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
Fixes: cc20d7999000 ("vfio/pci: Introduce VF token")
Fixes: e309df5b0c9e ("vfio/pci: Parallelize device open and release")
Fixes: 6eb7018705de ("vfio-pci: Move idle devices to D3hot power state")
Fixes: ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <8-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/pci/vfio_pci.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index b73144a6804a..cb7f2dc09e9d 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -2032,13 +2032,9 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&vdev->vma_list);
init_rwsem(&vdev->memory_lock);
- ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
- if (ret)
- goto out_free;
-
ret = vfio_pci_reflck_attach(vdev);
if (ret)
- goto out_del_group_dev;
+ goto out_free;
ret = vfio_pci_vf_init(vdev);
if (ret)
goto out_reflck;
@@ -2062,15 +2058,20 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
vfio_pci_set_power_state(vdev, PCI_D3hot);
}
- return ret;
+ ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
+ if (ret)
+ goto out_power;
+ return 0;
+out_power:
+ if (!disable_idle_d3)
+ vfio_pci_set_power_state(vdev, PCI_D0);
out_vf:
vfio_pci_vf_uninit(vdev);
out_reflck:
vfio_pci_reflck_put(vdev->reflck);
-out_del_group_dev:
- vfio_del_group_dev(&pdev->dev);
out_free:
+ kfree(vdev->pm_save);
kfree(vdev);
out_group_put:
vfio_iommu_group_put(group, &pdev->dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 398/677] drm/msm: Fix debugfs deadlock
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (396 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 397/677] vfio/pci: Re-order vfio_pci_probe() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 399/677] drm/msm/dpu: enable DPU_SSPP_QOS_8LVL for SM8250 Greg Kroah-Hartman
` (285 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rob Clark, Douglas Anderson, Sasha Levin
From: Rob Clark <robdclark@chromium.org>
[ Upstream commit 6ed0897cd800c38b92a33d335d9086c7b092eb15 ]
In normal cases the gem obj lock is acquired first before mm_lock. The
exception is iterating the various object lists. In the shrinker path,
deadlock is avoided by using msm_gem_trylock() and skipping over objects
that cannot be locked. But for debugfs the straightforward thing is to
split things out into a separate list of all objects protected by it's
own lock.
Fixes: d984457b31c4 ("drm/msm: Add priv->mm_lock to protect active/inactive lists")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210401012722.527712-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/msm_debugfs.c | 14 +++-----------
drivers/gpu/drm/msm/msm_drv.c | 3 +++
drivers/gpu/drm/msm/msm_drv.h | 9 ++++++++-
drivers/gpu/drm/msm/msm_gem.c | 14 +++++++++++++-
drivers/gpu/drm/msm/msm_gem.h | 12 ++++++++++--
5 files changed, 37 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
index 85ad0babc326..d611cc8e54a4 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -111,23 +111,15 @@ static const struct file_operations msm_gpu_fops = {
static int msm_gem_show(struct drm_device *dev, struct seq_file *m)
{
struct msm_drm_private *priv = dev->dev_private;
- struct msm_gpu *gpu = priv->gpu;
int ret;
- ret = mutex_lock_interruptible(&priv->mm_lock);
+ ret = mutex_lock_interruptible(&priv->obj_lock);
if (ret)
return ret;
- if (gpu) {
- seq_printf(m, "Active Objects (%s):\n", gpu->name);
- msm_gem_describe_objects(&gpu->active_list, m);
- }
-
- seq_printf(m, "Inactive Objects:\n");
- msm_gem_describe_objects(&priv->inactive_dontneed, m);
- msm_gem_describe_objects(&priv->inactive_willneed, m);
+ msm_gem_describe_objects(&priv->objects, m);
- mutex_unlock(&priv->mm_lock);
+ mutex_unlock(&priv->obj_lock);
return 0;
}
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 196907689c82..18ea1c66de71 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -446,6 +446,9 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
priv->wq = alloc_ordered_workqueue("msm", 0);
+ INIT_LIST_HEAD(&priv->objects);
+ mutex_init(&priv->obj_lock);
+
INIT_LIST_HEAD(&priv->inactive_willneed);
INIT_LIST_HEAD(&priv->inactive_dontneed);
mutex_init(&priv->mm_lock);
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 591c47a654e8..6b58e49754cb 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -174,7 +174,14 @@ struct msm_drm_private {
struct msm_rd_state *hangrd; /* debugfs to dump hanging submits */
struct msm_perf_state *perf;
- /*
+ /**
+ * List of all GEM objects (mainly for debugfs, protected by obj_lock
+ * (acquire before per GEM object lock)
+ */
+ struct list_head objects;
+ struct mutex obj_lock;
+
+ /**
* Lists of inactive GEM objects. Every bo is either in one of the
* inactive lists (depending on whether or not it is shrinkable) or
* gpu->active_list (for the gpu it is active on[1])
diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index f091c1e164fa..aeba3eb8ce46 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -951,7 +951,7 @@ void msm_gem_describe_objects(struct list_head *list, struct seq_file *m)
size_t size = 0;
seq_puts(m, " flags id ref offset kaddr size madv name\n");
- list_for_each_entry(msm_obj, list, mm_list) {
+ list_for_each_entry(msm_obj, list, node) {
struct drm_gem_object *obj = &msm_obj->base;
seq_puts(m, " ");
msm_gem_describe(obj, m);
@@ -970,6 +970,10 @@ void msm_gem_free_object(struct drm_gem_object *obj)
struct drm_device *dev = obj->dev;
struct msm_drm_private *priv = dev->dev_private;
+ mutex_lock(&priv->obj_lock);
+ list_del(&msm_obj->node);
+ mutex_unlock(&priv->obj_lock);
+
mutex_lock(&priv->mm_lock);
list_del(&msm_obj->mm_list);
mutex_unlock(&priv->mm_lock);
@@ -1157,6 +1161,10 @@ static struct drm_gem_object *_msm_gem_new(struct drm_device *dev,
list_add_tail(&msm_obj->mm_list, &priv->inactive_willneed);
mutex_unlock(&priv->mm_lock);
+ mutex_lock(&priv->obj_lock);
+ list_add_tail(&msm_obj->node, &priv->objects);
+ mutex_unlock(&priv->obj_lock);
+
return obj;
fail:
@@ -1227,6 +1235,10 @@ struct drm_gem_object *msm_gem_import(struct drm_device *dev,
list_add_tail(&msm_obj->mm_list, &priv->inactive_willneed);
mutex_unlock(&priv->mm_lock);
+ mutex_lock(&priv->obj_lock);
+ list_add_tail(&msm_obj->node, &priv->objects);
+ mutex_unlock(&priv->obj_lock);
+
return obj;
fail:
diff --git a/drivers/gpu/drm/msm/msm_gem.h b/drivers/gpu/drm/msm/msm_gem.h
index b3a0a880cbab..99d4c0e9465e 100644
--- a/drivers/gpu/drm/msm/msm_gem.h
+++ b/drivers/gpu/drm/msm/msm_gem.h
@@ -55,8 +55,16 @@ struct msm_gem_object {
*/
uint8_t vmap_count;
- /* And object is either:
- * inactive - on priv->inactive_list
+ /**
+ * Node in list of all objects (mainly for debugfs, protected by
+ * priv->obj_lock
+ */
+ struct list_head node;
+
+ /**
+ * An object is either:
+ * inactive - on priv->inactive_dontneed or priv->inactive_willneed
+ * (depending on purgability status)
* active - on one one of the gpu's active_list.. well, at
* least for now we don't have (I don't think) hw sync between
* 2d and 3d one devices which have both, meaning we need to
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 399/677] drm/msm/dpu: enable DPU_SSPP_QOS_8LVL for SM8250
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (397 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 398/677] drm/msm: Fix debugfs deadlock Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 400/677] vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer Greg Kroah-Hartman
` (284 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Baryshkov, Rob Clark, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 095eed898485312f86b7cb593da4f9cd5c43fdb0 ]
SM8250 platform has a 8-Levels VIG QoS setting. This setting was missed
due to bad interaction with b8dab65b5ac3 ("drm/msm/dpu: Move
DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks"), which was applied in
parallel.
Fixes: d21fc5dfc3df ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210318105435.2011222-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 189f3533525c..e4444452759c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -22,7 +22,7 @@
(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED4))
#define VIG_SM8250_MASK \
- (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
#define DMA_SDM845_MASK \
(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 400/677] vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (398 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 399/677] drm/msm/dpu: enable DPU_SSPP_QOS_8LVL for SM8250 Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 401/677] clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback Greg Kroah-Hartman
` (283 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig, Kevin Tian,
Max Gurtovoy, Cornelia Huck, Jason Gunthorpe, Alex Williamson,
Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit b5a1f8921d5040bb788492bf33a66758021e4be5 ]
There is a small race where the parent is NULL even though the kobj has
already been made visible in sysfs.
For instance the attribute_group is made visible in sysfs_create_files()
and the mdev_type_attr_show() does:
ret = attr->show(kobj, type->parent->dev, buf);
Which will crash on NULL parent. Move the parent setup to before the type
pointer leaves the stack frame.
Fixes: 7b96953bc640 ("vfio: Mediated device Core driver")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <2-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vfio/mdev/mdev_sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c
index 917fd84c1c6f..367ff5412a38 100644
--- a/drivers/vfio/mdev/mdev_sysfs.c
+++ b/drivers/vfio/mdev/mdev_sysfs.c
@@ -105,6 +105,7 @@ static struct mdev_type *add_mdev_supported_type(struct mdev_parent *parent,
return ERR_PTR(-ENOMEM);
type->kobj.kset = parent->mdev_types_kset;
+ type->parent = parent;
ret = kobject_init_and_add(&type->kobj, &mdev_type_ktype, NULL,
"%s-%s", dev_driver_string(parent->dev),
@@ -132,7 +133,6 @@ static struct mdev_type *add_mdev_supported_type(struct mdev_parent *parent,
}
type->group = group;
- type->parent = parent;
return type;
attrs_failed:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 401/677] clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (399 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 400/677] vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 402/677] clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable Greg Kroah-Hartman
` (282 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Laurent Pinchart, Quanyang Wang,
Stephen Boyd, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit d7fd3f9f53df8bb2212dff70f66f12cae0e1a653 ]
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/zynqmp/pll.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index 92f449ed38e5..03bfe62c1e62 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -100,9 +100,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
/* Enable the fractional mode if needed */
rate_div = (rate * FRAC_DIV) / *prate;
f = rate_div % FRAC_DIV;
- zynqmp_pll_set_mode(hw, !!f);
-
- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ if (f) {
if (rate > PS_PLL_VCO_MAX) {
fbdiv = rate / PS_PLL_VCO_MAX;
rate = rate / (fbdiv + 1);
@@ -173,10 +171,12 @@ static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
long rate_div, frac, m, f;
int ret;
- if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
- rate_div = (rate * FRAC_DIV) / parent_rate;
+ rate_div = (rate * FRAC_DIV) / parent_rate;
+ f = rate_div % FRAC_DIV;
+ zynqmp_pll_set_mode(hw, !!f);
+
+ if (f) {
m = rate_div / FRAC_DIV;
- f = rate_div % FRAC_DIV;
m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
rate = parent_rate * m;
frac = (parent_rate * f) / FRAC_DIV;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 402/677] clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (400 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 401/677] clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 403/677] drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train() Greg Kroah-Hartman
` (281 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Quanyang Wang, Laurent Pinchart,
Stephen Boyd, Sasha Levin
From: Quanyang Wang <quanyang.wang@windriver.com>
[ Upstream commit 394cdb69a3c30b33524cf1204afe5cceaba69cdc ]
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.
There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
should be set to FRAC mode. Then zynqmp_pll_set_mode is called
to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
called to try to enable VPLL_INT pll. Because of 1), the function
zynqmp_pll_enable just returns without doing anything after checking
that this pll has been enabled.
In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.
Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/zynqmp/pll.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index 03bfe62c1e62..abe6afbf3407 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -14,10 +14,12 @@
* struct zynqmp_pll - PLL clock
* @hw: Handle between common and hardware-specific interfaces
* @clk_id: PLL clock ID
+ * @set_pll_mode: Whether an IOCTL_SET_PLL_FRAC_MODE request be sent to ATF
*/
struct zynqmp_pll {
struct clk_hw hw;
u32 clk_id;
+ bool set_pll_mode;
};
#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw)
@@ -81,6 +83,8 @@ static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
if (ret)
pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
__func__, clk_name, ret);
+ else
+ clk->set_pll_mode = true;
}
/**
@@ -240,9 +244,15 @@ static int zynqmp_pll_enable(struct clk_hw *hw)
u32 clk_id = clk->clk_id;
int ret;
- if (zynqmp_pll_is_enabled(hw))
+ /*
+ * Don't skip enabling clock if there is an IOCTL_SET_PLL_FRAC_MODE request
+ * that has been sent to ATF.
+ */
+ if (zynqmp_pll_is_enabled(hw) && (!clk->set_pll_mode))
return 0;
+ clk->set_pll_mode = false;
+
ret = zynqmp_pm_clock_enable(clk_id);
if (ret)
pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 403/677] drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (401 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 402/677] clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 404/677] media: i2c: rdamc21: Fix warning on u8 cast Greg Kroah-Hartman
` (280 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Michal Simek,
Daniel Vetter, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 5842ab76bbfadb37eaea91e53c1efe34ae504e4a ]
The dp->train_set[] for this driver is only two characters, not four so
this memsets too much. Fortunately, this ends up corrupting a struct
hole and not anything important.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 99158ee67d02..59d1fb017da0 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -866,7 +866,7 @@ static int zynqmp_dp_train(struct zynqmp_dp *dp)
return ret;
zynqmp_dp_write(dp, ZYNQMP_DP_SCRAMBLING_DISABLE, 1);
- memset(dp->train_set, 0, 4);
+ memset(dp->train_set, 0, sizeof(dp->train_set));
ret = zynqmp_dp_link_train_cr(dp);
if (ret)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 404/677] media: i2c: rdamc21: Fix warning on u8 cast
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (402 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 403/677] drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 405/677] clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
` (279 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans Verkuil, Kieran Bingham,
Laurent Pinchart, Jacopo Mondi, Mauro Carvalho Chehab,
Sasha Levin
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
[ Upstream commit 5f58ac04f36e32507d8f60fd47266ae2a60a2fa8 ]
Sparse reports a warning on a cast to u8 of a 16 bits constant.
drivers/media/i2c/rdacm21.c:348:62: warning: cast truncates bits
from constant value (300a becomes a)
Even if the behaviour is intended, silence the sparse warning replacing
the cast with a bitwise & operation.
Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/rdacm21.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c
index dcc21515e5a4..179d107f494c 100644
--- a/drivers/media/i2c/rdacm21.c
+++ b/drivers/media/i2c/rdacm21.c
@@ -345,7 +345,7 @@ static int ov10640_initialize(struct rdacm21_device *dev)
/* Read OV10640 ID to test communications. */
ov490_write_reg(dev, OV490_SCCB_SLAVE0_DIR, OV490_SCCB_SLAVE_READ);
ov490_write_reg(dev, OV490_SCCB_SLAVE0_ADDR_HIGH, OV10640_CHIP_ID >> 8);
- ov490_write_reg(dev, OV490_SCCB_SLAVE0_ADDR_LOW, (u8)OV10640_CHIP_ID);
+ ov490_write_reg(dev, OV490_SCCB_SLAVE0_ADDR_LOW, OV10640_CHIP_ID & 0xff);
/* Trigger SCCB slave transaction and give it some time to complete. */
ov490_write_reg(dev, OV490_HOST_CMD, OV490_HOST_CMD_TRIGGER);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 405/677] clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (403 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 404/677] media: i2c: rdamc21: Fix warning on u8 cast Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 406/677] clk: qcom: a53-pll: " Greg Kroah-Hartman
` (278 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen Hui, Manivannan Sadhasivam,
Stephen Boyd, Sasha Levin
From: Chen Hui <clare.chenhui@huawei.com>
[ Upstream commit 77a618b1481f6fdb41b7585ed0f67c47fb8401e5 ]
CONFIG_QCOM_A7PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes: 5a5223ffd7ef ("clk: qcom: Add A7 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-2-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/a7-pll.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/a7-pll.c b/drivers/clk/qcom/a7-pll.c
index e171d3caf2cf..c4a53e5db229 100644
--- a/drivers/clk/qcom/a7-pll.c
+++ b/drivers/clk/qcom/a7-pll.c
@@ -86,6 +86,7 @@ static const struct of_device_id qcom_a7pll_match_table[] = {
{ .compatible = "qcom,sdx55-a7pll" },
{ }
};
+MODULE_DEVICE_TABLE(of, qcom_a7pll_match_table);
static struct platform_driver qcom_a7pll_driver = {
.probe = qcom_a7pll_probe,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 406/677] clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (404 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 405/677] clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 407/677] clk: qcom: apss-ipq-pll: " Greg Kroah-Hartman
` (277 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen Hui, Manivannan Sadhasivam,
Stephen Boyd, Sasha Levin
From: Chen Hui <clare.chenhui@huawei.com>
[ Upstream commit 790b516ada10a4dcc0f0a56dc0ced475d86d5820 ]
CONFIG_QCOM_A53PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes: 0c6ab1b8f894 ("clk: qcom: Add A53 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-3-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/a53-pll.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
index 45cfc57bff92..af6ac17c7dae 100644
--- a/drivers/clk/qcom/a53-pll.c
+++ b/drivers/clk/qcom/a53-pll.c
@@ -93,6 +93,7 @@ static const struct of_device_id qcom_a53pll_match_table[] = {
{ .compatible = "qcom,msm8916-a53pll" },
{ }
};
+MODULE_DEVICE_TABLE(of, qcom_a53pll_match_table);
static struct platform_driver qcom_a53pll_driver = {
.probe = qcom_a53pll_probe,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 407/677] clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (405 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 406/677] clk: qcom: a53-pll: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 408/677] drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct Greg Kroah-Hartman
` (276 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen Hui, Manivannan Sadhasivam,
Stephen Boyd, Sasha Levin
From: Chen Hui <clare.chenhui@huawei.com>
[ Upstream commit d0a859edda46b45baeab9687d173102300d76e2b ]
CONFIG_IPQ_APSS_PLL is tristate option and therefore this driver can
be compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes: ecd2bacfbbc4 ("clk: qcom: Add ipq apss pll driver")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-4-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/apss-ipq-pll.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 30be87fb222a..bef7899ad0d6 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -81,6 +81,7 @@ static const struct of_device_id apss_ipq_pll_match_table[] = {
{ .compatible = "qcom,ipq6018-a53pll" },
{ }
};
+MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
static struct platform_driver apss_ipq_pll_driver = {
.probe = apss_ipq_pll_probe,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 408/677] drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (406 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 407/677] clk: qcom: apss-ipq-pll: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 409/677] drm/amd/display: check fb of primary plane Greg Kroah-Hartman
` (275 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harry Wentland, Nirmoy Das,
Alex Deucher, Sasha Levin
From: Nirmoy Das <nirmoy.das@amd.com>
[ Upstream commit 3bb1105071fb974e3e3ca2f92ddfd69c81285ab6 ]
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct()
can't sleep.
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311
as dcn20_resource_construct() also calls into SMU functions which does
mutex_lock().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dce/dce_abm.c | 2 +-
drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c | 6 ++---
.../gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c | 2 +-
.../drm/amd/display/dc/dcn20/dcn20_resource.c | 26 +++++++++----------
4 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
index 4e87e70237e3..874b132fe1d7 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
@@ -283,7 +283,7 @@ struct abm *dce_abm_create(
const struct dce_abm_shift *abm_shift,
const struct dce_abm_mask *abm_mask)
{
- struct dce_abm *abm_dce = kzalloc(sizeof(*abm_dce), GFP_KERNEL);
+ struct dce_abm *abm_dce = kzalloc(sizeof(*abm_dce), GFP_ATOMIC);
if (abm_dce == NULL) {
BREAK_TO_DEBUGGER();
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
index ddc789daf3b1..09d4cb5c97b6 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c
@@ -1049,7 +1049,7 @@ struct dmcu *dcn10_dmcu_create(
const struct dce_dmcu_shift *dmcu_shift,
const struct dce_dmcu_mask *dmcu_mask)
{
- struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_KERNEL);
+ struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_ATOMIC);
if (dmcu_dce == NULL) {
BREAK_TO_DEBUGGER();
@@ -1070,7 +1070,7 @@ struct dmcu *dcn20_dmcu_create(
const struct dce_dmcu_shift *dmcu_shift,
const struct dce_dmcu_mask *dmcu_mask)
{
- struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_KERNEL);
+ struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_ATOMIC);
if (dmcu_dce == NULL) {
BREAK_TO_DEBUGGER();
@@ -1091,7 +1091,7 @@ struct dmcu *dcn21_dmcu_create(
const struct dce_dmcu_shift *dmcu_shift,
const struct dce_dmcu_mask *dmcu_mask)
{
- struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_KERNEL);
+ struct dce_dmcu *dmcu_dce = kzalloc(sizeof(*dmcu_dce), GFP_ATOMIC);
if (dmcu_dce == NULL) {
BREAK_TO_DEBUGGER();
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c
index 62cc2651e00c..8774406120fc 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c
@@ -112,7 +112,7 @@ struct dccg *dccg2_create(
const struct dccg_shift *dccg_shift,
const struct dccg_mask *dccg_mask)
{
- struct dcn_dccg *dccg_dcn = kzalloc(sizeof(*dccg_dcn), GFP_KERNEL);
+ struct dcn_dccg *dccg_dcn = kzalloc(sizeof(*dccg_dcn), GFP_ATOMIC);
struct dccg *base;
if (dccg_dcn == NULL) {
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 2c2dbfcd8957..bfbc23b76cd5 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1104,7 +1104,7 @@ struct dpp *dcn20_dpp_create(
uint32_t inst)
{
struct dcn20_dpp *dpp =
- kzalloc(sizeof(struct dcn20_dpp), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn20_dpp), GFP_ATOMIC);
if (!dpp)
return NULL;
@@ -1122,7 +1122,7 @@ struct input_pixel_processor *dcn20_ipp_create(
struct dc_context *ctx, uint32_t inst)
{
struct dcn10_ipp *ipp =
- kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn10_ipp), GFP_ATOMIC);
if (!ipp) {
BREAK_TO_DEBUGGER();
@@ -1139,7 +1139,7 @@ struct output_pixel_processor *dcn20_opp_create(
struct dc_context *ctx, uint32_t inst)
{
struct dcn20_opp *opp =
- kzalloc(sizeof(struct dcn20_opp), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn20_opp), GFP_ATOMIC);
if (!opp) {
BREAK_TO_DEBUGGER();
@@ -1156,7 +1156,7 @@ struct dce_aux *dcn20_aux_engine_create(
uint32_t inst)
{
struct aux_engine_dce110 *aux_engine =
- kzalloc(sizeof(struct aux_engine_dce110), GFP_KERNEL);
+ kzalloc(sizeof(struct aux_engine_dce110), GFP_ATOMIC);
if (!aux_engine)
return NULL;
@@ -1194,7 +1194,7 @@ struct dce_i2c_hw *dcn20_i2c_hw_create(
uint32_t inst)
{
struct dce_i2c_hw *dce_i2c_hw =
- kzalloc(sizeof(struct dce_i2c_hw), GFP_KERNEL);
+ kzalloc(sizeof(struct dce_i2c_hw), GFP_ATOMIC);
if (!dce_i2c_hw)
return NULL;
@@ -1207,7 +1207,7 @@ struct dce_i2c_hw *dcn20_i2c_hw_create(
struct mpc *dcn20_mpc_create(struct dc_context *ctx)
{
struct dcn20_mpc *mpc20 = kzalloc(sizeof(struct dcn20_mpc),
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!mpc20)
return NULL;
@@ -1225,7 +1225,7 @@ struct hubbub *dcn20_hubbub_create(struct dc_context *ctx)
{
int i;
struct dcn20_hubbub *hubbub = kzalloc(sizeof(struct dcn20_hubbub),
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!hubbub)
return NULL;
@@ -1253,7 +1253,7 @@ struct timing_generator *dcn20_timing_generator_create(
uint32_t instance)
{
struct optc *tgn10 =
- kzalloc(sizeof(struct optc), GFP_KERNEL);
+ kzalloc(sizeof(struct optc), GFP_ATOMIC);
if (!tgn10)
return NULL;
@@ -1332,7 +1332,7 @@ static struct clock_source *dcn20_clock_source_create(
bool dp_clk_src)
{
struct dce110_clk_src *clk_src =
- kzalloc(sizeof(struct dce110_clk_src), GFP_KERNEL);
+ kzalloc(sizeof(struct dce110_clk_src), GFP_ATOMIC);
if (!clk_src)
return NULL;
@@ -1438,7 +1438,7 @@ struct display_stream_compressor *dcn20_dsc_create(
struct dc_context *ctx, uint32_t inst)
{
struct dcn20_dsc *dsc =
- kzalloc(sizeof(struct dcn20_dsc), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn20_dsc), GFP_ATOMIC);
if (!dsc) {
BREAK_TO_DEBUGGER();
@@ -1572,7 +1572,7 @@ struct hubp *dcn20_hubp_create(
uint32_t inst)
{
struct dcn20_hubp *hubp2 =
- kzalloc(sizeof(struct dcn20_hubp), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn20_hubp), GFP_ATOMIC);
if (!hubp2)
return NULL;
@@ -3390,7 +3390,7 @@ bool dcn20_mmhubbub_create(struct dc_context *ctx, struct resource_pool *pool)
static struct pp_smu_funcs *dcn20_pp_smu_create(struct dc_context *ctx)
{
- struct pp_smu_funcs *pp_smu = kzalloc(sizeof(*pp_smu), GFP_KERNEL);
+ struct pp_smu_funcs *pp_smu = kzalloc(sizeof(*pp_smu), GFP_ATOMIC);
if (!pp_smu)
return pp_smu;
@@ -4034,7 +4034,7 @@ struct resource_pool *dcn20_create_resource_pool(
struct dc *dc)
{
struct dcn20_resource_pool *pool =
- kzalloc(sizeof(struct dcn20_resource_pool), GFP_KERNEL);
+ kzalloc(sizeof(struct dcn20_resource_pool), GFP_ATOMIC);
if (!pool)
return NULL;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 409/677] drm/amd/display: check fb of primary plane
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (407 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 408/677] drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 410/677] drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() Greg Kroah-Hartman
` (274 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Simon Ser, Harry Wentland,
Sefa Eyeoglu, Alex Deucher, Sasha Levin
From: Sefa Eyeoglu <contact@scrumplex.net>
[ Upstream commit 7df4ceb60fa9a3c5160cfd5b696657291934a2c9 ]
Sometimes the primary plane might not be initialized (yet), which
causes dm_check_crtc_cursor to divide by zero.
Apparently a weird state before a S3-suspend causes the aforementioned
divide-by-zero error when resuming from S3. This was explained in
bug 212293 on Bugzilla.
To avoid this divide-by-zero error we check if the primary plane's fb
isn't NULL. If it's NULL the src_w and src_h attributes will be 0,
which would cause a divide-by-zero.
This fixes Bugzilla report 212293
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=212293
Fixes: 12f4849a1cfd69f3 ("drm/amd/display: check cursor scaling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 2e42cdea6927..71e07ebc8f88 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -9295,7 +9295,8 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
new_cursor_state = drm_atomic_get_new_plane_state(state, crtc->cursor);
new_primary_state = drm_atomic_get_new_plane_state(state, crtc->primary);
- if (!new_cursor_state || !new_primary_state || !new_cursor_state->fb) {
+ if (!new_cursor_state || !new_primary_state ||
+ !new_cursor_state->fb || !new_primary_state->fb) {
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 410/677] drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (408 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 409/677] drm/amd/display: check fb of primary plane Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 411/677] bcache: Use 64-bit arithmetic instead of 32-bit Greg Kroah-Hartman
` (273 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yingjie Wang, Alex Deucher, Sasha Levin
From: Yingjie Wang <wangyingjie55@126.com>
[ Upstream commit 25315ebfaefcffd126a266116b37bb8a3d1c4620 ]
In radeon_dp_mst_detect(), We should check whether or not @connector
has been unregistered from userspace. If the connector is unregistered,
we should return disconnected status.
Fixes: 9843ead08f18 ("drm/radeon: add DisplayPort MST support (v2)")
Signed-off-by: Yingjie Wang <wangyingjie55@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/radeon_dp_mst.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_dp_mst.c b/drivers/gpu/drm/radeon/radeon_dp_mst.c
index 2c32186c4acd..4e4c937c36c6 100644
--- a/drivers/gpu/drm/radeon/radeon_dp_mst.c
+++ b/drivers/gpu/drm/radeon/radeon_dp_mst.c
@@ -242,6 +242,9 @@ radeon_dp_mst_detect(struct drm_connector *connector,
to_radeon_connector(connector);
struct radeon_connector *master = radeon_connector->mst_port;
+ if (drm_connector_is_unregistered(connector))
+ return connector_status_disconnected;
+
return drm_dp_mst_detect_port(connector, ctx, &master->mst_mgr,
radeon_connector->port);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 411/677] bcache: Use 64-bit arithmetic instead of 32-bit
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (409 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 410/677] drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 412/677] clk: uniphier: Fix potential infinite loop Greg Kroah-Hartman
` (272 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gustavo A. R. Silva, Coly Li,
Jens Axboe, Sasha Levin
From: Gustavo A. R. Silva <gustavoars@kernel.org>
[ Upstream commit 62594f189e81caffa6a3bfa2fdb08eec2e347c76 ]
Cast multiple variables to (int64_t) in order to give the compiler
complete information about the proper arithmetic to use. Notice that
these variables are being used in contexts that expect expressions of
type int64_t (64 bit, signed). And currently, such expressions are
being evaluated using 32-bit arithmetic.
Fixes: d0cf9503e908 ("octeontx2-pf: ethtool fec mode support")
Addresses-Coverity-ID: 1501724 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1501725 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1501726 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/writeback.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index 82d4e0880a99..4fb635c0baa0 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -110,13 +110,13 @@ static void __update_writeback_rate(struct cached_dev *dc)
int64_t fps;
if (c->gc_stats.in_use <= BCH_WRITEBACK_FRAGMENT_THRESHOLD_MID) {
- fp_term = dc->writeback_rate_fp_term_low *
+ fp_term = (int64_t)dc->writeback_rate_fp_term_low *
(c->gc_stats.in_use - BCH_WRITEBACK_FRAGMENT_THRESHOLD_LOW);
} else if (c->gc_stats.in_use <= BCH_WRITEBACK_FRAGMENT_THRESHOLD_HIGH) {
- fp_term = dc->writeback_rate_fp_term_mid *
+ fp_term = (int64_t)dc->writeback_rate_fp_term_mid *
(c->gc_stats.in_use - BCH_WRITEBACK_FRAGMENT_THRESHOLD_MID);
} else {
- fp_term = dc->writeback_rate_fp_term_high *
+ fp_term = (int64_t)dc->writeback_rate_fp_term_high *
(c->gc_stats.in_use - BCH_WRITEBACK_FRAGMENT_THRESHOLD_HIGH);
}
fps = div_s64(dirty, dirty_buckets) * fp_term;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 412/677] clk: uniphier: Fix potential infinite loop
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (410 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 411/677] bcache: Use 64-bit arithmetic instead of 32-bit Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 413/677] scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check() Greg Kroah-Hartman
` (271 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Masahiro Yamada,
Stephen Boyd, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit f6b1340dc751a6caa2a0567b667d0f4f4172cd58 ]
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents. Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.
Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/uniphier/clk-uniphier-mux.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/uniphier/clk-uniphier-mux.c b/drivers/clk/uniphier/clk-uniphier-mux.c
index 462c84321b2d..1998e9d4cfc0 100644
--- a/drivers/clk/uniphier/clk-uniphier-mux.c
+++ b/drivers/clk/uniphier/clk-uniphier-mux.c
@@ -31,10 +31,10 @@ static int uniphier_clk_mux_set_parent(struct clk_hw *hw, u8 index)
static u8 uniphier_clk_mux_get_parent(struct clk_hw *hw)
{
struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
- int num_parents = clk_hw_get_num_parents(hw);
+ unsigned int num_parents = clk_hw_get_num_parents(hw);
int ret;
unsigned int val;
- u8 i;
+ unsigned int i;
ret = regmap_read(mux->regmap, mux->reg, &val);
if (ret)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 413/677] scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (411 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 412/677] clk: uniphier: Fix potential infinite loop Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 414/677] scsi: pm80xx: Fix potential infinite loop Greg Kroah-Hartman
` (270 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vishakha Channapattan, Jack Wang,
Igor Pylypiv, Martin K. Petersen, Sasha Levin
From: Igor Pylypiv <ipylypiv@google.com>
[ Upstream commit 3f744a14f331f56703a9d74e86520db045f11831 ]
The mpi_uninit_check() takes longer for inbound doorbell register to be
cleared. Increase the timeout substantially so that the driver does not
fail to load.
Previously, the inbound doorbell wait time was mistakenly increased in the
mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the
mpi_init_check() wait time as-is as these are timeout values and if there
is a failure, waiting longer is not an issue.
Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com
Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 84315560e8e1..c6b0834e3806 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1502,9 +1502,9 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
/* wait until Inbound DoorBell Clear Register toggled */
if (IS_SPCV_12G(pm8001_ha->pdev)) {
- max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+ max_wait_count = 30 * 1000 * 1000; /* 30 sec */
} else {
- max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ max_wait_count = 15 * 1000 * 1000; /* 15 sec */
}
do {
udelay(1);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 414/677] scsi: pm80xx: Fix potential infinite loop
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (412 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 413/677] scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 415/677] scsi: ufs: ufshcd-pltfrm: Fix deferred probing Greg Kroah-Hartman
` (269 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johannes Thumshirn, Colin Ian King,
Martin K. Petersen, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 40fa7394a1ad5706e795823276f2e394cca145d0 ]
The for-loop iterates with a u8 loop counter i and compares this with the
loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a
potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop
counter. Fix this by making the loop counter the same type as
pm8001_ha->max_q_num.
[mkp: this is purely theoretical, max_q_num is currently limited to 64]
Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com
Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure")
Addresses-Coverity: ("Infinite loop")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 31e5455d280c..1b1a57f46989 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -643,7 +643,7 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
*/
static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
{
- u8 i = 0;
+ u32 i = 0;
u16 deviceid;
pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
/* 8081 controllers need BAR shift to access MPI space
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 415/677] scsi: ufs: ufshcd-pltfrm: Fix deferred probing
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (413 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 414/677] scsi: pm80xx: Fix potential infinite loop Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 416/677] scsi: hisi_sas: Fix IRQ checks Greg Kroah-Hartman
` (268 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Martin K. Petersen,
Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 339c9b63cc7ce779ce45c675bf709cb58b807fc3 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream as it should have been done from the start...
Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru
Fixes: 2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 1a69949a4ea1..b56d9b4e5f03 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -377,7 +377,7 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- err = -ENODEV;
+ err = irq;
goto out;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 416/677] scsi: hisi_sas: Fix IRQ checks
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (414 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 415/677] scsi: ufs: ufshcd-pltfrm: Fix deferred probing Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 417/677] scsi: jazz_esp: Add IRQ check Greg Kroah-Hartman
` (267 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Garry, Sergey Shtylyov,
Martin K. Petersen, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 6c11dc060427e07ca144eacaccd696106b361b06 ]
Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take
into account that irq_of_parse_and_map() and platform_get_irq() have a
different way of indicating an error: the former returns 0 and the latter
returns a negative error code. Fix up the IRQ checks!
Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru
Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()")
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 7451377c4cb6..3e359ac752fd 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1646,7 +1646,7 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
idx = i * HISI_SAS_PHY_INT_NR;
for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
irq = platform_get_irq(pdev, idx);
- if (!irq) {
+ if (irq < 0) {
dev_err(dev, "irq init: fail map phy interrupt %d\n",
idx);
return -ENOENT;
@@ -1665,7 +1665,7 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
idx = hisi_hba->n_phy * HISI_SAS_PHY_INT_NR;
for (i = 0; i < hisi_hba->queue_count; i++, idx++) {
irq = platform_get_irq(pdev, idx);
- if (!irq) {
+ if (irq < 0) {
dev_err(dev, "irq init: could not map cq interrupt %d\n",
idx);
return -ENOENT;
@@ -1683,7 +1683,7 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
idx = (hisi_hba->n_phy * HISI_SAS_PHY_INT_NR) + hisi_hba->queue_count;
for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++, idx++) {
irq = platform_get_irq(pdev, idx);
- if (!irq) {
+ if (irq < 0) {
dev_err(dev, "irq init: could not map fatal interrupt %d\n",
idx);
return -ENOENT;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 417/677] scsi: jazz_esp: Add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (415 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 416/677] scsi: hisi_sas: Fix IRQ checks Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 418/677] scsi: sun3x_esp: " Greg Kroah-Hartman
` (266 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Martin K. Petersen,
Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 38fca15c29db6ed06e894ac194502633e2a7d1fb ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru
Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/jazz_esp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index f0ed6863cc70..60a88a95a8e2 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -143,7 +143,9 @@ static int esp_jazz_probe(struct platform_device *dev)
if (!esp->command_block)
goto fail_unmap_regs;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = err = platform_get_irq(dev, 0);
+ if (err < 0)
+ goto fail_unmap_command_block;
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
if (err < 0)
goto fail_unmap_command_block;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 418/677] scsi: sun3x_esp: Add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (416 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 417/677] scsi: jazz_esp: Add IRQ check Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 419/677] scsi: sni_53c710: " Greg Kroah-Hartman
` (265 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Martin K. Petersen,
Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 14b321380eb333c82853d7d612d0995f05f88fdc ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real
error code. Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru
Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/sun3x_esp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 7de82f2c9757..d3489ac7ab28 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -206,7 +206,9 @@ static int esp_sun3x_probe(struct platform_device *dev)
if (!esp->command_block)
goto fail_unmap_regs_dma;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = err = platform_get_irq(dev, 0);
+ if (err < 0)
+ goto fail_unmap_command_block;
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED,
"SUN3X ESP", esp);
if (err < 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 419/677] scsi: sni_53c710: Add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (417 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 418/677] scsi: sun3x_esp: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 420/677] scsi: ibmvfc: Fix invalid state machine BUG_ON() Greg Kroah-Hartman
` (264 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Martin K. Petersen,
Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 1160d61bc51e87e509cfaf9da50a0060f67b6de4 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV
further below). Stop calling request_irq() with the invalid IRQ #s.
Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru
Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/sni_53c710.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
index 9e2e196bc202..97c6f81b1d2a 100644
--- a/drivers/scsi/sni_53c710.c
+++ b/drivers/scsi/sni_53c710.c
@@ -58,6 +58,7 @@ static int snirm710_probe(struct platform_device *dev)
struct NCR_700_Host_Parameters *hostdata;
struct Scsi_Host *host;
struct resource *res;
+ int rc;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res)
@@ -83,7 +84,9 @@ static int snirm710_probe(struct platform_device *dev)
goto out_kfree;
host->this_id = 7;
host->base = base;
- host->irq = platform_get_irq(dev, 0);
+ host->irq = rc = platform_get_irq(dev, 0);
+ if (rc < 0)
+ goto out_put_host;
if(request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "snirm710", host)) {
printk(KERN_ERR "snirm710: request_irq failed!\n");
goto out_put_host;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 420/677] scsi: ibmvfc: Fix invalid state machine BUG_ON()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (418 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 419/677] scsi: sni_53c710: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 421/677] mailbox: sprd: Introduce refcnt when clients requests/free channels Greg Kroah-Hartman
` (263 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian King, Tyrel Datwyler,
Martin K. Petersen, Sasha Levin
From: Brian King <brking@linux.vnet.ibm.com>
[ Upstream commit 15cfef8623a449d40d16541687afd58e78033be3 ]
This fixes an issue hitting the BUG_ON() in ibmvfc_do_work(). When going
through a host action of IBMVFC_HOST_ACTION_RESET, we change the action to
IBMVFC_HOST_ACTION_TGT_DEL, then drop the host lock, and reset the CRQ,
which changes the host state to IBMVFC_NO_CRQ. If, prior to setting the
host state to IBMVFC_NO_CRQ, ibmvfc_init_host() is called, it can then end
up changing the host action to IBMVFC_HOST_ACTION_INIT. If we then change
the host state to IBMVFC_NO_CRQ, we will then hit the BUG_ON().
Make a couple of changes to avoid this. Leave the host action to be
IBMVFC_HOST_ACTION_RESET or IBMVFC_HOST_ACTION_REENABLE until after we drop
the host lock and reset or reenable the CRQ. Also harden the host state
machine to ensure we cannot leave the reset / reenable state until we've
finished processing the reset or reenable.
Link: https://lore.kernel.org/r/20210413001009.902400-1-tyreld@linux.ibm.com
Fixes: 73ee5d867287 ("[SCSI] ibmvfc: Fix soft lockup on resume")
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
[tyreld: added fixes tag]
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mkp: fix comment checkpatch warnings]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 57 ++++++++++++++++++++++------------
1 file changed, 38 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 61831f2fdb30..d6675a25719d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -603,8 +603,17 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
if (vhost->action == IBMVFC_HOST_ACTION_ALLOC_TGTS)
vhost->action = action;
break;
+ case IBMVFC_HOST_ACTION_REENABLE:
+ case IBMVFC_HOST_ACTION_RESET:
+ vhost->action = action;
+ break;
case IBMVFC_HOST_ACTION_INIT:
case IBMVFC_HOST_ACTION_TGT_DEL:
+ case IBMVFC_HOST_ACTION_LOGO:
+ case IBMVFC_HOST_ACTION_QUERY_TGTS:
+ case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
+ case IBMVFC_HOST_ACTION_NONE:
+ default:
switch (vhost->action) {
case IBMVFC_HOST_ACTION_RESET:
case IBMVFC_HOST_ACTION_REENABLE:
@@ -614,15 +623,6 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
break;
}
break;
- case IBMVFC_HOST_ACTION_LOGO:
- case IBMVFC_HOST_ACTION_QUERY_TGTS:
- case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
- case IBMVFC_HOST_ACTION_NONE:
- case IBMVFC_HOST_ACTION_RESET:
- case IBMVFC_HOST_ACTION_REENABLE:
- default:
- vhost->action = action;
- break;
}
}
@@ -5373,30 +5373,49 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
case IBMVFC_HOST_ACTION_INIT_WAIT:
break;
case IBMVFC_HOST_ACTION_RESET:
- vhost->action = IBMVFC_HOST_ACTION_TGT_DEL;
list_splice_init(&vhost->purge, &purge);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
ibmvfc_complete_purge(&purge);
rc = ibmvfc_reset_crq(vhost);
+
spin_lock_irqsave(vhost->host->host_lock, flags);
- if (rc == H_CLOSED)
+ if (!rc || rc == H_CLOSED)
vio_enable_interrupts(to_vio_dev(vhost->dev));
- if (rc || (rc = ibmvfc_send_crq_init(vhost)) ||
- (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) {
- ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
- dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc);
+ if (vhost->action == IBMVFC_HOST_ACTION_RESET) {
+ /*
+ * The only action we could have changed to would have
+ * been reenable, in which case, we skip the rest of
+ * this path and wait until we've done the re-enable
+ * before sending the crq init.
+ */
+ vhost->action = IBMVFC_HOST_ACTION_TGT_DEL;
+
+ if (rc || (rc = ibmvfc_send_crq_init(vhost)) ||
+ (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) {
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc);
+ }
}
break;
case IBMVFC_HOST_ACTION_REENABLE:
- vhost->action = IBMVFC_HOST_ACTION_TGT_DEL;
list_splice_init(&vhost->purge, &purge);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
ibmvfc_complete_purge(&purge);
rc = ibmvfc_reenable_crq_queue(vhost);
+
spin_lock_irqsave(vhost->host->host_lock, flags);
- if (rc || (rc = ibmvfc_send_crq_init(vhost))) {
- ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
- dev_err(vhost->dev, "Error after enable (rc=%d)\n", rc);
+ if (vhost->action == IBMVFC_HOST_ACTION_REENABLE) {
+ /*
+ * The only action we could have changed to would have
+ * been reset, in which case, we skip the rest of this
+ * path and wait until we've done the reset before
+ * sending the crq init.
+ */
+ vhost->action = IBMVFC_HOST_ACTION_TGT_DEL;
+ if (rc || (rc = ibmvfc_send_crq_init(vhost))) {
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ dev_err(vhost->dev, "Error after enable (rc=%d)\n", rc);
+ }
}
break;
case IBMVFC_HOST_ACTION_LOGO:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 421/677] mailbox: sprd: Introduce refcnt when clients requests/free channels
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (419 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 420/677] scsi: ibmvfc: Fix invalid state machine BUG_ON() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 422/677] mfd: stm32-timers: Avoid clearing auto reload register Greg Kroah-Hartman
` (262 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Orson Zhai, Baolin Wang, Jassi Brar,
Sasha Levin
From: Orson Zhai <orson.zhai@unisoc.com>
[ Upstream commit 9468ab84032f96496e998cfa173cd1d0ac316bcd ]
Unisoc mailbox has no way to be enabled/disabled for any single channel.
They can only be set to startup or shutdown as a whole device at same time.
Add a variable to count references to avoid mailbox FIFO being reset
unexpectedly when clients are requesting or freeing channels.
Also add a lock to dismiss possible conflicts from register r/w in
different startup or shutdown threads. And fix the crash problem when early
interrupts come from channel which has not been requested by client yet.
Fixes: ca27fc26cd22 ("mailbox: sprd: Add Spreadtrum mailbox driver")
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mailbox/sprd-mailbox.c | 43 +++++++++++++++++++++++-----------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c
index 4c325301a2fe..94d9067dc8d0 100644
--- a/drivers/mailbox/sprd-mailbox.c
+++ b/drivers/mailbox/sprd-mailbox.c
@@ -60,6 +60,8 @@ struct sprd_mbox_priv {
struct clk *clk;
u32 outbox_fifo_depth;
+ struct mutex lock;
+ u32 refcnt;
struct mbox_chan chan[SPRD_MBOX_CHAN_MAX];
};
@@ -115,7 +117,11 @@ static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data)
id = readl(priv->outbox_base + SPRD_MBOX_ID);
chan = &priv->chan[id];
- mbox_chan_received_data(chan, (void *)msg);
+ if (chan->cl)
+ mbox_chan_received_data(chan, (void *)msg);
+ else
+ dev_warn_ratelimited(priv->dev,
+ "message's been dropped at ch[%d]\n", id);
/* Trigger to update outbox FIFO pointer */
writel(0x1, priv->outbox_base + SPRD_MBOX_TRIGGER);
@@ -215,18 +221,22 @@ static int sprd_mbox_startup(struct mbox_chan *chan)
struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
u32 val;
- /* Select outbox FIFO mode and reset the outbox FIFO status */
- writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST);
+ mutex_lock(&priv->lock);
+ if (priv->refcnt++ == 0) {
+ /* Select outbox FIFO mode and reset the outbox FIFO status */
+ writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST);
- /* Enable inbox FIFO overflow and delivery interrupt */
- val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK);
- val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ);
- writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+ /* Enable inbox FIFO overflow and delivery interrupt */
+ val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+ val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ);
+ writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
- /* Enable outbox FIFO not empty interrupt */
- val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK);
- val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ;
- writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ /* Enable outbox FIFO not empty interrupt */
+ val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ;
+ writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
@@ -235,9 +245,13 @@ static void sprd_mbox_shutdown(struct mbox_chan *chan)
{
struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox);
- /* Disable inbox & outbox interrupt */
- writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
- writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ mutex_lock(&priv->lock);
+ if (--priv->refcnt == 0) {
+ /* Disable inbox & outbox interrupt */
+ writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK);
+ writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK);
+ }
+ mutex_unlock(&priv->lock);
}
static const struct mbox_chan_ops sprd_mbox_ops = {
@@ -266,6 +280,7 @@ static int sprd_mbox_probe(struct platform_device *pdev)
return -ENOMEM;
priv->dev = dev;
+ mutex_init(&priv->lock);
/*
* The Spreadtrum mailbox uses an inbox to send messages to the target
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 422/677] mfd: stm32-timers: Avoid clearing auto reload register
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (420 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 421/677] mailbox: sprd: Introduce refcnt when clients requests/free channels Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 423/677] nvmet-tcp: fix a segmentation fault during io parsing error Greg Kroah-Hartman
` (261 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabrice Gasnier,
William Breathitt Gray, Lee Jones, Sasha Levin
From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
[ Upstream commit 4917e498c6894ba077867aff78f82cffd5ffbb5c ]
The ARR register is cleared unconditionally upon probing, after the maximum
value has been read. This initial condition is rather not intuitive, when
considering the counter child driver. It rather expects the maximum value
by default:
- The counter interface shows a zero value by default for 'ceiling'
attribute.
- Enabling the counter without any prior configuration makes it doesn't
count.
The reset value of ARR register is the maximum. So Choice here
is to backup it, and restore it then, instead of clearing its value.
It also fixes the initial condition seen by the counter driver.
Fixes: d0f949e220fd ("mfd: Add STM32 Timers driver")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mfd/stm32-timers.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c
index add603359124..44ed2fce0319 100644
--- a/drivers/mfd/stm32-timers.c
+++ b/drivers/mfd/stm32-timers.c
@@ -158,13 +158,18 @@ static const struct regmap_config stm32_timers_regmap_cfg = {
static void stm32_timers_get_arr_size(struct stm32_timers *ddata)
{
+ u32 arr;
+
+ /* Backup ARR to restore it after getting the maximum value */
+ regmap_read(ddata->regmap, TIM_ARR, &arr);
+
/*
* Only the available bits will be written so when readback
* we get the maximum value of auto reload register
*/
regmap_write(ddata->regmap, TIM_ARR, ~0L);
regmap_read(ddata->regmap, TIM_ARR, &ddata->max_arr);
- regmap_write(ddata->regmap, TIM_ARR, 0x0);
+ regmap_write(ddata->regmap, TIM_ARR, arr);
}
static int stm32_timers_dma_probe(struct device *dev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 423/677] nvmet-tcp: fix a segmentation fault during io parsing error
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (421 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 422/677] mfd: stm32-timers: Avoid clearing auto reload register Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 424/677] nvme-pci: dont simple map sgl when sgls are disabled Greg Kroah-Hartman
` (260 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Elad Grupi, Hou Pu, Sagi Grimberg,
Christoph Hellwig, Sasha Levin
From: Elad Grupi <elad.grupi@dell.com>
[ Upstream commit bdaf13279192c60b2b1fc99badef53b494fec055 ]
In case there is an io that contains inline data and it goes to
parsing error flow, command response will free command and iov
before clearing the data on the socket buffer.
This will delay the command response until receive flow is completed.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/tcp.c | 39 +++++++++++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 218fd766dc74..d958b5da9b88 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -525,11 +525,36 @@ static void nvmet_tcp_queue_response(struct nvmet_req *req)
struct nvmet_tcp_cmd *cmd =
container_of(req, struct nvmet_tcp_cmd, req);
struct nvmet_tcp_queue *queue = cmd->queue;
+ struct nvme_sgl_desc *sgl;
+ u32 len;
+
+ if (unlikely(cmd == queue->cmd)) {
+ sgl = &cmd->req.cmd->common.dptr.sgl;
+ len = le32_to_cpu(sgl->length);
+
+ /*
+ * Wait for inline data before processing the response.
+ * Avoid using helpers, this might happen before
+ * nvmet_req_init is completed.
+ */
+ if (queue->rcv_state == NVMET_TCP_RECV_PDU &&
+ len && len < cmd->req.port->inline_data_size &&
+ nvme_is_write(cmd->req.cmd))
+ return;
+ }
llist_add(&cmd->lentry, &queue->resp_list);
queue_work_on(queue_cpu(queue), nvmet_tcp_wq, &cmd->queue->io_work);
}
+static void nvmet_tcp_execute_request(struct nvmet_tcp_cmd *cmd)
+{
+ if (unlikely(cmd->flags & NVMET_TCP_F_INIT_FAILED))
+ nvmet_tcp_queue_response(&cmd->req);
+ else
+ cmd->req.execute(&cmd->req);
+}
+
static int nvmet_try_send_data_pdu(struct nvmet_tcp_cmd *cmd)
{
u8 hdgst = nvmet_tcp_hdgst_len(cmd->queue);
@@ -961,7 +986,7 @@ static int nvmet_tcp_done_recv_pdu(struct nvmet_tcp_queue *queue)
le32_to_cpu(req->cmd->common.dptr.sgl.length));
nvmet_tcp_handle_req_failure(queue, queue->cmd, req);
- return -EAGAIN;
+ return 0;
}
ret = nvmet_tcp_map_data(queue->cmd);
@@ -1104,10 +1129,8 @@ static int nvmet_tcp_try_recv_data(struct nvmet_tcp_queue *queue)
return 0;
}
- if (!(cmd->flags & NVMET_TCP_F_INIT_FAILED) &&
- cmd->rbytes_done == cmd->req.transfer_len) {
- cmd->req.execute(&cmd->req);
- }
+ if (cmd->rbytes_done == cmd->req.transfer_len)
+ nvmet_tcp_execute_request(cmd);
nvmet_prepare_receive_pdu(queue);
return 0;
@@ -1144,9 +1167,9 @@ static int nvmet_tcp_try_recv_ddgst(struct nvmet_tcp_queue *queue)
goto out;
}
- if (!(cmd->flags & NVMET_TCP_F_INIT_FAILED) &&
- cmd->rbytes_done == cmd->req.transfer_len)
- cmd->req.execute(&cmd->req);
+ if (cmd->rbytes_done == cmd->req.transfer_len)
+ nvmet_tcp_execute_request(cmd);
+
ret = 0;
out:
nvmet_prepare_receive_pdu(queue);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 424/677] nvme-pci: dont simple map sgl when sgls are disabled
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (422 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 423/677] nvmet-tcp: fix a segmentation fault during io parsing error Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 425/677] media: meson-ge2d: fix rotation parameters Greg Kroah-Hartman
` (259 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Niklas Cassel, Christoph Hellwig,
Sasha Levin
From: Niklas Cassel <niklas.cassel@wdc.com>
[ Upstream commit e51183be1fa96dc6d3cd11b3c25a0f595807315e ]
According to the module parameter description for sgl_threshold,
a value of 0 means that SGLs are disabled.
If SGLs are disabled, we should respect that, even for the case
where the request is made up of a single physical segment.
Fixes: 297910571f08 ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 7249ae74f71f..c92a15c3fbc5 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -852,7 +852,7 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
return nvme_setup_prp_simple(dev, req,
&cmnd->rw, &bv);
- if (iod->nvmeq->qid &&
+ if (iod->nvmeq->qid && sgl_threshold &&
dev->ctrl.sgls & ((1 << 0) | (1 << 1)))
return nvme_setup_sgl_simple(dev, req,
&cmnd->rw, &bv);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 425/677] media: meson-ge2d: fix rotation parameters
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (423 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 424/677] nvme-pci: dont simple map sgl when sgls are disabled Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 426/677] media: cedrus: Fix H265 status definitions Greg Kroah-Hartman
` (258 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Neil Armstrong, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Neil Armstrong <narmstrong@baylibre.com>
[ Upstream commit 87e780db2253a1759822c2c9ea207135fcc059de ]
With these settings, 90deg and 270deg rotation leads to inverted
vertical, fix them to have correct rotation.
Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/meson/ge2d/ge2d.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/meson/ge2d/ge2d.c b/drivers/media/platform/meson/ge2d/ge2d.c
index 153612ca96fc..a1393fefa8ae 100644
--- a/drivers/media/platform/meson/ge2d/ge2d.c
+++ b/drivers/media/platform/meson/ge2d/ge2d.c
@@ -757,7 +757,7 @@ static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
if (ctrl->val == 90) {
ctx->hflip = 0;
- ctx->vflip = 0;
+ ctx->vflip = 1;
ctx->xy_swap = 1;
} else if (ctrl->val == 180) {
ctx->hflip = 1;
@@ -765,7 +765,7 @@ static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
ctx->xy_swap = 0;
} else if (ctrl->val == 270) {
ctx->hflip = 1;
- ctx->vflip = 1;
+ ctx->vflip = 0;
ctx->xy_swap = 1;
} else {
ctx->hflip = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 426/677] media: cedrus: Fix H265 status definitions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (424 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 425/677] media: meson-ge2d: fix rotation parameters Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 427/677] HSI: core: fix resource leaks in hsi_add_client_from_dt() Greg Kroah-Hartman
` (257 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jernej Skrabec, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
From: Jernej Skrabec <jernej.skrabec@siol.net>
[ Upstream commit 147d211cc9b4d753148d1640a1758b25edfbf437 ]
Some of the H265 status flags are wrong. Redefine them to corespond to
Allwinner CedarC open source userspace library. Only one of these flags
is actually used and new value also matches value used in libvdpau-sunxi
library, which is proven to be working.
Note that wrong (old) value in right circumstances (in combination with
another H265 decoding bug) causes driver lock up. With this fix decoding
is still broken (green output) but at least driver doesn't lock up.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../staging/media/sunxi/cedrus/cedrus_regs.h | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_regs.h b/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
index 7718c561823f..92ace87c1c7d 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_regs.h
@@ -443,16 +443,17 @@
#define VE_DEC_H265_STATUS_STCD_BUSY BIT(21)
#define VE_DEC_H265_STATUS_WB_BUSY BIT(20)
#define VE_DEC_H265_STATUS_BS_DMA_BUSY BIT(19)
-#define VE_DEC_H265_STATUS_IQIT_BUSY BIT(18)
+#define VE_DEC_H265_STATUS_IT_BUSY BIT(18)
#define VE_DEC_H265_STATUS_INTER_BUSY BIT(17)
#define VE_DEC_H265_STATUS_MORE_DATA BIT(16)
-#define VE_DEC_H265_STATUS_VLD_BUSY BIT(14)
-#define VE_DEC_H265_STATUS_DEBLOCKING_BUSY BIT(13)
-#define VE_DEC_H265_STATUS_DEBLOCKING_DRAM_BUSY BIT(12)
-#define VE_DEC_H265_STATUS_INTRA_BUSY BIT(11)
-#define VE_DEC_H265_STATUS_SAO_BUSY BIT(10)
-#define VE_DEC_H265_STATUS_MVP_BUSY BIT(9)
-#define VE_DEC_H265_STATUS_SWDEC_BUSY BIT(8)
+#define VE_DEC_H265_STATUS_DBLK_BUSY BIT(15)
+#define VE_DEC_H265_STATUS_IREC_BUSY BIT(14)
+#define VE_DEC_H265_STATUS_INTRA_BUSY BIT(13)
+#define VE_DEC_H265_STATUS_MCRI_BUSY BIT(12)
+#define VE_DEC_H265_STATUS_IQIT_BUSY BIT(11)
+#define VE_DEC_H265_STATUS_MVP_BUSY BIT(10)
+#define VE_DEC_H265_STATUS_IS_BUSY BIT(9)
+#define VE_DEC_H265_STATUS_VLD_BUSY BIT(8)
#define VE_DEC_H265_STATUS_OVER_TIME BIT(3)
#define VE_DEC_H265_STATUS_VLD_DATA_REQ BIT(2)
#define VE_DEC_H265_STATUS_ERROR BIT(1)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 427/677] HSI: core: fix resource leaks in hsi_add_client_from_dt()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (425 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 426/677] media: cedrus: Fix H265 status definitions Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 428/677] x86/events/amd/iommu: Fix sysfs type mismatch Greg Kroah-Hartman
` (256 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Jason Gunthorpe,
Sebastian Reichel, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 5c08b0f75575648032f309a6f58294453423ed93 ]
If some of the allocations fail between the dev_set_name() and the
device_register() then the name will not be freed. Fix this by
moving dev_set_name() directly in front of the call to device_register().
Fixes: a2aa24734d9d ("HSI: Add common DT binding for HSI client devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hsi/hsi_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index c3fb5beb846e..ec90713564e3 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -210,8 +210,6 @@ static void hsi_add_client_from_dt(struct hsi_port *port,
if (err)
goto err;
- dev_set_name(&cl->device, "%s", name);
-
err = hsi_of_property_parse_mode(client, "hsi-mode", &mode);
if (err) {
err = hsi_of_property_parse_mode(client, "hsi-rx-mode",
@@ -293,6 +291,7 @@ static void hsi_add_client_from_dt(struct hsi_port *port,
cl->device.release = hsi_client_release;
cl->device.of_node = client;
+ dev_set_name(&cl->device, "%s", name);
if (device_register(&cl->device) < 0) {
pr_err("hsi: failed to register client: %s\n", name);
put_device(&cl->device);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 428/677] x86/events/amd/iommu: Fix sysfs type mismatch
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (426 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 427/677] HSI: core: fix resource leaks in hsi_add_client_from_dt() Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 429/677] perf/amd/uncore: " Greg Kroah-Hartman
` (255 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor,
Peter Zijlstra (Intel),
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit de5bc7b425d4c27ae5faa00ea7eb6b9780b9a355 ]
dev_attr_show() calls _iommu_event_show() via an indirect call but
_iommu_event_show()'s type does not currently match the type of the
show() member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_iommu_1/events/mem_dte_hit
csource=0x0a
$ dmesg | grep "CFI failure"
[ 3526.735140] CFI failure (target: _iommu_event_show...):
Change _iommu_event_show() and 'struct amd_iommu_event_desc' to
'struct device_attribute' so that there is no more CFI violation.
Fixes: 7be6296fdd75 ("perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/amd/iommu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/events/amd/iommu.c b/arch/x86/events/amd/iommu.c
index be50ef8572cc..6a98a7651621 100644
--- a/arch/x86/events/amd/iommu.c
+++ b/arch/x86/events/amd/iommu.c
@@ -81,12 +81,12 @@ static struct attribute_group amd_iommu_events_group = {
};
struct amd_iommu_event_desc {
- struct kobj_attribute attr;
+ struct device_attribute attr;
const char *event;
};
-static ssize_t _iommu_event_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
+static ssize_t _iommu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct amd_iommu_event_desc *event =
container_of(attr, struct amd_iommu_event_desc, attr);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 429/677] perf/amd/uncore: Fix sysfs type mismatch
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (427 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 428/677] x86/events/amd/iommu: Fix sysfs type mismatch Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 430/677] io_uring: fix overflows checks in provide buffers Greg Kroah-Hartman
` (254 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor,
Peter Zijlstra (Intel),
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 5deac80d4571dffb51f452f0027979d72259a1b9 ]
dev_attr_show() calls the __uncore_*_show() functions via an indirect
call but their type does not currently match the type of the show()
member in 'struct device_attribute', resulting in a Control Flow
Integrity violation.
$ cat /sys/devices/amd_l3/format/umask
config:8-15
$ dmesg | grep "CFI failure"
[ 1258.174653] CFI failure (target: __uncore_umask_show...):
Update the type in the DEFINE_UNCORE_FORMAT_ATTR macro to match
'struct device_attribute' so that there is no more CFI violation.
Fixes: 06f2c24584f3 ("perf/amd/uncore: Prepare to scale for more attributes that vary per family")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415001112.3024673-2-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/amd/uncore.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/events/amd/uncore.c b/arch/x86/events/amd/uncore.c
index 7f014d450bc2..582c0ffb5e98 100644
--- a/arch/x86/events/amd/uncore.c
+++ b/arch/x86/events/amd/uncore.c
@@ -275,14 +275,14 @@ static struct attribute_group amd_uncore_attr_group = {
};
#define DEFINE_UNCORE_FORMAT_ATTR(_var, _name, _format) \
-static ssize_t __uncore_##_var##_show(struct kobject *kobj, \
- struct kobj_attribute *attr, \
+static ssize_t __uncore_##_var##_show(struct device *dev, \
+ struct device_attribute *attr, \
char *page) \
{ \
BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
return sprintf(page, _format "\n"); \
} \
-static struct kobj_attribute format_attr_##_var = \
+static struct device_attribute format_attr_##_var = \
__ATTR(_name, 0444, __uncore_##_var##_show, NULL)
DEFINE_UNCORE_FORMAT_ATTR(event12, event, "config:0-7,32-35");
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 430/677] io_uring: fix overflows checks in provide buffers
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (428 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 429/677] perf/amd/uncore: " Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 431/677] block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name Greg Kroah-Hartman
` (253 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Pavel Begunkov,
Jens Axboe, Sasha Levin
From: Pavel Begunkov <asml.silence@gmail.com>
[ Upstream commit 38134ada0ceea3e848fe993263c0ff6207fd46e7 ]
Colin reported before possible overflow and sign extension problems in
io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing
useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension").
Do that with help of check_<op>_overflow helpers. And fix struct
io_provide_buf::len type, as it doesn't make much sense to keep it
signed.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: efe68c1ca8f49 ("io_uring: validate the full range of provided buffers for access")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/46538827e70fce5f6cdb50897cff4cacc490f380.1618488258.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/io_uring.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 2bdd7eab6c66..144056b0cac9 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -614,7 +614,7 @@ struct io_splice {
struct io_provide_buf {
struct file *file;
__u64 addr;
- __s32 len;
+ __u32 len;
__u32 bgid;
__u16 nbufs;
__u16 bid;
@@ -3979,7 +3979,7 @@ static int io_remove_buffers(struct io_kiocb *req, unsigned int issue_flags)
static int io_provide_buffers_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
- unsigned long size;
+ unsigned long size, tmp_check;
struct io_provide_buf *p = &req->pbuf;
u64 tmp;
@@ -3993,6 +3993,12 @@ static int io_provide_buffers_prep(struct io_kiocb *req,
p->addr = READ_ONCE(sqe->addr);
p->len = READ_ONCE(sqe->len);
+ if (check_mul_overflow((unsigned long)p->len, (unsigned long)p->nbufs,
+ &size))
+ return -EOVERFLOW;
+ if (check_add_overflow((unsigned long)p->addr, size, &tmp_check))
+ return -EOVERFLOW;
+
size = (unsigned long)p->len * p->nbufs;
if (!access_ok(u64_to_user_ptr(p->addr), size))
return -EFAULT;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 431/677] block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (429 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 430/677] io_uring: fix overflows checks in provide buffers Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 432/677] sched/debug: Fix cgroup_path[] serialization Greg Kroah-Hartman
` (252 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dima Stepanov, Arnd Bergmann,
Jack Wang, Gioh Kim, Chaitanya Kulkarni, Jens Axboe, Sasha Levin
From: Dima Stepanov <dmitrii.stepanov@cloud.ionos.com>
[ Upstream commit 3db7cf55d532a15ea26b4a14e8f8729ccd96fd22 ]
cppcheck report the following error:
rnbd/rnbd-clt-sysfs.c:522:36: error: The variable 'buf' is used both
as a parameter and as destination in snprintf(). The origin and
destination buffers overlap. Quote from glibc (C-library)
documentation
(http://www.gnu.org/software/libc/manual/html_mono/libc.html#Formatted-Output-Functions):
"If copying takes place between objects that overlap as a result of a
call to sprintf() or snprintf(), the results are undefined."
[sprintfOverlappingData]
Fix it by initializing the buf variable in the first snprintf call.
Fixes: 91f4acb2801c ("block/rnbd-clt: support mapping two devices")
Signed-off-by: Dima Stepanov <dmitrii.stepanov@ionos.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210419073722.15351-19-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/rnbd/rnbd-clt-sysfs.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/block/rnbd/rnbd-clt-sysfs.c b/drivers/block/rnbd/rnbd-clt-sysfs.c
index 526c77cd7a50..49ad400a5225 100644
--- a/drivers/block/rnbd/rnbd-clt-sysfs.c
+++ b/drivers/block/rnbd/rnbd-clt-sysfs.c
@@ -483,11 +483,7 @@ static int rnbd_clt_get_path_name(struct rnbd_clt_dev *dev, char *buf,
while ((s = strchr(pathname, '/')))
s[0] = '!';
- ret = snprintf(buf, len, "%s", pathname);
- if (ret >= len)
- return -ENAMETOOLONG;
-
- ret = snprintf(buf, len, "%s@%s", buf, dev->sess->sessname);
+ ret = snprintf(buf, len, "%s@%s", pathname, dev->sess->sessname);
if (ret >= len)
return -ENAMETOOLONG;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 432/677] sched/debug: Fix cgroup_path[] serialization
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (430 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 431/677] block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 433/677] kthread: Fix PF_KTHREAD vs to_kthread() race Greg Kroah-Hartman
` (251 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra, Waiman Long, Sasha Levin
From: Waiman Long <longman@redhat.com>
[ Upstream commit ad789f84c9a145f8a18744c0387cec22ec51651e ]
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes: efe25c2c7b3a ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/debug.c | 42 +++++++++++++++++++++++++++++-------------
1 file changed, 29 insertions(+), 13 deletions(-)
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 486f403a778b..9c8b3ed2199a 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -8,8 +8,6 @@
*/
#include "sched.h"
-static DEFINE_SPINLOCK(sched_debug_lock);
-
/*
* This allows printing both to /proc/sched_debug and
* to the console
@@ -470,16 +468,37 @@ static void print_cfs_group_stats(struct seq_file *m, int cpu, struct task_group
#endif
#ifdef CONFIG_CGROUP_SCHED
+static DEFINE_SPINLOCK(sched_debug_lock);
static char group_path[PATH_MAX];
-static char *task_group_path(struct task_group *tg)
+static void task_group_path(struct task_group *tg, char *path, int plen)
{
- if (autogroup_path(tg, group_path, PATH_MAX))
- return group_path;
+ if (autogroup_path(tg, path, plen))
+ return;
- cgroup_path(tg->css.cgroup, group_path, PATH_MAX);
+ cgroup_path(tg->css.cgroup, path, plen);
+}
- return group_path;
+/*
+ * Only 1 SEQ_printf_task_group_path() caller can use the full length
+ * group_path[] for cgroup path. Other simultaneous callers will have
+ * to use a shorter stack buffer. A "..." suffix is appended at the end
+ * of the stack buffer so that it will show up in case the output length
+ * matches the given buffer size to indicate possible path name truncation.
+ */
+#define SEQ_printf_task_group_path(m, tg, fmt...) \
+{ \
+ if (spin_trylock(&sched_debug_lock)) { \
+ task_group_path(tg, group_path, sizeof(group_path)); \
+ SEQ_printf(m, fmt, group_path); \
+ spin_unlock(&sched_debug_lock); \
+ } else { \
+ char buf[128]; \
+ char *bufend = buf + sizeof(buf) - 3; \
+ task_group_path(tg, buf, bufend - buf); \
+ strcpy(bufend - 1, "..."); \
+ SEQ_printf(m, fmt, buf); \
+ } \
}
#endif
@@ -506,7 +525,7 @@ print_task(struct seq_file *m, struct rq *rq, struct task_struct *p)
SEQ_printf(m, " %d %d", task_node(p), task_numa_group_id(p));
#endif
#ifdef CONFIG_CGROUP_SCHED
- SEQ_printf(m, " %s", task_group_path(task_group(p)));
+ SEQ_printf_task_group_path(m, task_group(p), " %s")
#endif
SEQ_printf(m, "\n");
@@ -543,7 +562,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
#ifdef CONFIG_FAIR_GROUP_SCHED
SEQ_printf(m, "\n");
- SEQ_printf(m, "cfs_rq[%d]:%s\n", cpu, task_group_path(cfs_rq->tg));
+ SEQ_printf_task_group_path(m, cfs_rq->tg, "cfs_rq[%d]:%s\n", cpu);
#else
SEQ_printf(m, "\n");
SEQ_printf(m, "cfs_rq[%d]:\n", cpu);
@@ -614,7 +633,7 @@ void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq)
{
#ifdef CONFIG_RT_GROUP_SCHED
SEQ_printf(m, "\n");
- SEQ_printf(m, "rt_rq[%d]:%s\n", cpu, task_group_path(rt_rq->tg));
+ SEQ_printf_task_group_path(m, rt_rq->tg, "rt_rq[%d]:%s\n", cpu);
#else
SEQ_printf(m, "\n");
SEQ_printf(m, "rt_rq[%d]:\n", cpu);
@@ -666,7 +685,6 @@ void print_dl_rq(struct seq_file *m, int cpu, struct dl_rq *dl_rq)
static void print_cpu(struct seq_file *m, int cpu)
{
struct rq *rq = cpu_rq(cpu);
- unsigned long flags;
#ifdef CONFIG_X86
{
@@ -717,13 +735,11 @@ do { \
}
#undef P
- spin_lock_irqsave(&sched_debug_lock, flags);
print_cfs_stats(m, cpu);
print_rt_stats(m, cpu);
print_dl_stats(m, cpu);
print_rq(m, rq, cpu);
- spin_unlock_irqrestore(&sched_debug_lock, flags);
SEQ_printf(m, "\n");
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 433/677] kthread: Fix PF_KTHREAD vs to_kthread() race
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (431 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 432/677] sched/debug: Fix cgroup_path[] serialization Greg Kroah-Hartman
@ 2021-05-12 14:47 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 434/677] ataflop: potential out of bounds in do_format() Greg Kroah-Hartman
` (250 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra (Intel),
Valentin Schneider, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 3a7956e25e1d7b3c148569e78895e1f3178122a9 ]
The kthread_is_per_cpu() construct relies on only being called on
PF_KTHREAD tasks (per the WARN in to_kthread). This gives rise to the
following usage pattern:
if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))
However, as reported by syzcaller, this is broken. The scenario is:
CPU0 CPU1 (running p)
(p->flags & PF_KTHREAD) // true
begin_new_exec()
me->flags &= ~(PF_KTHREAD|...);
kthread_is_per_cpu(p)
to_kthread(p)
WARN(!(p->flags & PF_KTHREAD) <-- *SPLAT*
Introduce __to_kthread() that omits the WARN and is sure to check both
values.
Use this to remove the problematic pattern for kthread_is_per_cpu()
and fix a number of other kthread_*() functions that have similar
issues but are currently not used in ways that would expose the
problem.
Notably kthread_func() is only ever called on 'current', while
kthread_probe_data() is only used for PF_WQ_WORKER, which implies the
task is from kthread_create*().
Fixes: ac687e6e8c26 ("kthread: Extract KTHREAD_IS_PER_CPU")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/YH6WJc825C4P0FCK@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/kthread.c | 33 +++++++++++++++++++++++++++------
kernel/sched/core.c | 2 +-
kernel/sched/fair.c | 2 +-
3 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 1578973c5740..6d3c488a0f82 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -84,6 +84,25 @@ static inline struct kthread *to_kthread(struct task_struct *k)
return (__force void *)k->set_child_tid;
}
+/*
+ * Variant of to_kthread() that doesn't assume @p is a kthread.
+ *
+ * Per construction; when:
+ *
+ * (p->flags & PF_KTHREAD) && p->set_child_tid
+ *
+ * the task is both a kthread and struct kthread is persistent. However
+ * PF_KTHREAD on it's own is not, kernel_thread() can exec() (See umh.c and
+ * begin_new_exec()).
+ */
+static inline struct kthread *__to_kthread(struct task_struct *p)
+{
+ void *kthread = (__force void *)p->set_child_tid;
+ if (kthread && !(p->flags & PF_KTHREAD))
+ kthread = NULL;
+ return kthread;
+}
+
void free_kthread_struct(struct task_struct *k)
{
struct kthread *kthread;
@@ -168,8 +187,9 @@ EXPORT_SYMBOL_GPL(kthread_freezable_should_stop);
*/
void *kthread_func(struct task_struct *task)
{
- if (task->flags & PF_KTHREAD)
- return to_kthread(task)->threadfn;
+ struct kthread *kthread = __to_kthread(task);
+ if (kthread)
+ return kthread->threadfn;
return NULL;
}
EXPORT_SYMBOL_GPL(kthread_func);
@@ -199,10 +219,11 @@ EXPORT_SYMBOL_GPL(kthread_data);
*/
void *kthread_probe_data(struct task_struct *task)
{
- struct kthread *kthread = to_kthread(task);
+ struct kthread *kthread = __to_kthread(task);
void *data = NULL;
- copy_from_kernel_nofault(&data, &kthread->data, sizeof(data));
+ if (kthread)
+ copy_from_kernel_nofault(&data, &kthread->data, sizeof(data));
return data;
}
@@ -514,9 +535,9 @@ void kthread_set_per_cpu(struct task_struct *k, int cpu)
set_bit(KTHREAD_IS_PER_CPU, &kthread->flags);
}
-bool kthread_is_per_cpu(struct task_struct *k)
+bool kthread_is_per_cpu(struct task_struct *p)
{
- struct kthread *kthread = to_kthread(k);
+ struct kthread *kthread = __to_kthread(p);
if (!kthread)
return false;
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 98191218d891..17ad829a114c 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7652,7 +7652,7 @@ static void balance_push(struct rq *rq)
* histerical raisins.
*/
if (rq->idle == push_task ||
- ((push_task->flags & PF_KTHREAD) && kthread_is_per_cpu(push_task)) ||
+ kthread_is_per_cpu(push_task) ||
is_migration_disabled(push_task)) {
/*
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index b5ffe808b07b..d078767f677f 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7608,7 +7608,7 @@ int can_migrate_task(struct task_struct *p, struct lb_env *env)
return 0;
/* Disregard pcpu kthreads; they are where they need to be. */
- if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))
+ if (kthread_is_per_cpu(p))
return 0;
if (!cpumask_test_cpu(env->dst_cpu, p->cpus_ptr)) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 434/677] ataflop: potential out of bounds in do_format()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (432 preceding siblings ...)
2021-05-12 14:47 ` [PATCH 5.12 433/677] kthread: Fix PF_KTHREAD vs to_kthread() race Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 435/677] ataflop: fix off by one in ataflop_probe() Greg Kroah-Hartman
` (249 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Christoph Hellwig, Jens Axboe, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 1ffec389a6431782a8a28805830b6fae9bf00af1 ]
The function uses "type" as an array index:
q = unit[drive].disk[type]->queue;
Unfortunately the bounds check on "type" isn't done until later in the
function. Fix this by moving the bounds check to the start.
Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ataflop.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 104b713f4055..aed2c2a4f4ea 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -729,8 +729,12 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
unsigned long flags;
int ret;
- if (type)
+ if (type) {
type--;
+ if (type >= NUM_DISK_MINORS ||
+ minor2disktype[type].drive_types > DriveType)
+ return -EINVAL;
+ }
q = unit[drive].disk[type]->queue;
blk_mq_freeze_queue(q);
@@ -742,11 +746,6 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
local_irq_restore(flags);
if (type) {
- if (type >= NUM_DISK_MINORS ||
- minor2disktype[type].drive_types > DriveType) {
- ret = -EINVAL;
- goto out;
- }
type = minor2disktype[type].index;
UDT = &atari_disk_type[type];
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 435/677] ataflop: fix off by one in ataflop_probe()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (433 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 434/677] ataflop: potential out of bounds in do_format() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 436/677] drivers/block/null_blk/main: Fix a double free in null_init Greg Kroah-Hartman
` (248 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Christoph Hellwig, Jens Axboe, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit b777f4c47781df6b23e3f4df6fdb92d9aceac7bb ]
Smatch complains that the "type > NUM_DISK_MINORS" should be >=
instead of >. We also need to subtract one from "type" at the start.
Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ataflop.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index aed2c2a4f4ea..d601e49f80e0 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -2001,7 +2001,10 @@ static void ataflop_probe(dev_t dev)
int drive = MINOR(dev) & 3;
int type = MINOR(dev) >> 2;
- if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS)
+ if (type)
+ type--;
+
+ if (drive >= FD_MAX_UNITS || type >= NUM_DISK_MINORS)
return;
mutex_lock(&ataflop_probe_lock);
if (!unit[drive].disk[type]) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 436/677] drivers/block/null_blk/main: Fix a double free in null_init.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (434 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 435/677] ataflop: fix off by one in ataflop_probe() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 437/677] xsk: Respect devices headroom and tailroom on generic xmit path Greg Kroah-Hartman
` (247 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Jens Axboe, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 72ce11ddfa4e9e1879103581a60b7e34547eaa0a ]
In null_init, null_add_dev(dev) is called.
In null_add_dev, it calls null_free_zoned_dev(dev) to free dev->zones
via kvfree(dev->zones) in out_cleanup_zone branch and returns err.
Then null_init accept the err code and then calls null_free_dev(dev).
But in null_free_dev(dev), dev->zones is freed again by
null_free_zoned_dev().
My patch set dev->zones to NULL in null_free_zoned_dev() after
kvfree(dev->zones) is called, to avoid the double free.
Fixes: 2984c8684f962 ("nullb: factor disk parameters")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426143229.7374-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/null_blk/zoned.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index bfcab1c782b5..dae54dd1aeac 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -180,6 +180,7 @@ int null_register_zoned_dev(struct nullb *nullb)
void null_free_zoned_dev(struct nullb_device *dev)
{
kvfree(dev->zones);
+ dev->zones = NULL;
}
int null_report_zones(struct gendisk *disk, sector_t sector,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 437/677] xsk: Respect devices headroom and tailroom on generic xmit path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (435 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 436/677] drivers/block/null_blk/main: Fix a double free in null_init Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 438/677] HID: plantronics: Workaround for double volume key presses Greg Kroah-Hartman
` (246 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Lobakin, Daniel Borkmann,
Magnus Karlsson, John Fastabend, Sasha Levin
From: Alexander Lobakin <alobakin@pm.me>
[ Upstream commit 3914d88f7608e6c2e80e344474fa289370c32451 ]
xsk_generic_xmit() allocates a new skb and then queues it for
xmitting. The size of new skb's headroom is desc->len, so it comes
to the driver/device with no reserved headroom and/or tailroom.
Lots of drivers need some headroom (and sometimes tailroom) to
prepend (and/or append) some headers or data, e.g. CPU tags,
device-specific headers/descriptors (LSO, TLS etc.), and if case
of no available space skb_cow_head() will reallocate the skb.
Reallocations are unwanted on fast-path, especially when it comes
to XDP, so generic XSK xmit should reserve the spaces declared in
dev->needed_headroom and dev->needed tailroom to avoid them.
Note on max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom)):
Usually, output functions reserve LL_RESERVED_SPACE(dev), which
consists of dev->hard_header_len + dev->needed_headroom, aligned
by 16.
However, on XSK xmit hard header is already here in the chunk, so
hard_header_len is not needed. But it'd still be better to align
data up to cacheline, while reserving no less than driver requests
for headroom. NET_SKB_PAD here is to double-insure there will be
no reallocations even when the driver advertises no needed_headroom,
but in fact need it (not so rare case).
Fixes: 35fcde7f8deb ("xsk: support for Tx")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-5-alobakin@pm.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xdp/xsk.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index 4faabd1ecfd1..143979ea4165 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -454,12 +454,16 @@ static int xsk_generic_xmit(struct sock *sk)
struct sk_buff *skb;
unsigned long flags;
int err = 0;
+ u32 hr, tr;
mutex_lock(&xs->mutex);
if (xs->queue_id >= xs->dev->real_num_tx_queues)
goto out;
+ hr = max(NET_SKB_PAD, L1_CACHE_ALIGN(xs->dev->needed_headroom));
+ tr = xs->dev->needed_tailroom;
+
while (xskq_cons_peek_desc(xs->tx, &desc, xs->pool)) {
char *buffer;
u64 addr;
@@ -471,11 +475,13 @@ static int xsk_generic_xmit(struct sock *sk)
}
len = desc.len;
- skb = sock_alloc_send_skb(sk, len, 1, &err);
+ skb = sock_alloc_send_skb(sk, hr + len + tr, 1, &err);
if (unlikely(!skb))
goto out;
+ skb_reserve(skb, hr);
skb_put(skb, len);
+
addr = desc.addr;
buffer = xsk_buff_raw_get_data(xs->pool, addr);
err = skb_store_bits(skb, 0, buffer, len);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 438/677] HID: plantronics: Workaround for double volume key presses
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (436 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 437/677] xsk: Respect devices headroom and tailroom on generic xmit path Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 439/677] perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars Greg Kroah-Hartman
` (245 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Mikityanskiy, Jiri Kosina, Sasha Levin
From: Maxim Mikityanskiy <maxtram95@gmail.com>
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-plantronics.c | 60 +++++++++++++++++++++++++++++++++--
include/linux/hid.h | 2 ++
3 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 67fd8a2f5aba..ba338973e968 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -946,6 +946,7 @@
#define USB_DEVICE_ID_ORTEK_IHOME_IMAC_A210S 0x8003
#define USB_VENDOR_ID_PLANTRONICS 0x047f
+#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES 0xc056
#define USB_VENDOR_ID_PANASONIC 0x04da
#define USB_DEVICE_ID_PANABOARD_UBT780 0x1044
diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c
index 85b685efc12f..e81b7cec2d12 100644
--- a/drivers/hid/hid-plantronics.c
+++ b/drivers/hid/hid-plantronics.c
@@ -13,6 +13,7 @@
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/jiffies.h>
#define PLT_HID_1_0_PAGE 0xffa00000
#define PLT_HID_2_0_PAGE 0xffa20000
@@ -36,6 +37,16 @@
#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \
(usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER)
+#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0)
+
+#define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */
+
+struct plt_drv_data {
+ unsigned long device_type;
+ unsigned long last_volume_key_ts;
+ u32 quirks;
+};
+
static int plantronics_input_mapping(struct hid_device *hdev,
struct hid_input *hi,
struct hid_field *field,
@@ -43,7 +54,8 @@ static int plantronics_input_mapping(struct hid_device *hdev,
unsigned long **bit, int *max)
{
unsigned short mapped_key;
- unsigned long plt_type = (unsigned long)hid_get_drvdata(hdev);
+ struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+ unsigned long plt_type = drv_data->device_type;
/* special case for PTT products */
if (field->application == HID_GD_JOYSTICK)
@@ -105,6 +117,30 @@ mapped:
return 1;
}
+static int plantronics_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+
+ if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) {
+ unsigned long prev_ts, cur_ts;
+
+ /* Usages are filtered in plantronics_usages. */
+
+ if (!value) /* Handle key presses only. */
+ return 0;
+
+ prev_ts = drv_data->last_volume_key_ts;
+ cur_ts = jiffies;
+ if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT)
+ return 1; /* Ignore the repeated key. */
+
+ drv_data->last_volume_key_ts = cur_ts;
+ }
+
+ return 0;
+}
+
static unsigned long plantronics_device_type(struct hid_device *hdev)
{
unsigned i, col_page;
@@ -133,15 +169,24 @@ exit:
static int plantronics_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
+ struct plt_drv_data *drv_data;
int ret;
+ drv_data = devm_kzalloc(&hdev->dev, sizeof(*drv_data), GFP_KERNEL);
+ if (!drv_data)
+ return -ENOMEM;
+
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
- hid_set_drvdata(hdev, (void *)plantronics_device_type(hdev));
+ drv_data->device_type = plantronics_device_type(hdev);
+ drv_data->quirks = id->driver_data;
+ drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+
+ hid_set_drvdata(hdev, drv_data);
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
HID_CONNECT_HIDINPUT_FORCE | HID_CONNECT_HIDDEV_FORCE);
@@ -153,15 +198,26 @@ err:
}
static const struct hid_device_id plantronics_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+ USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
+ .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(hid, plantronics_devices);
+static const struct hid_usage_id plantronics_usages[] = {
+ { HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID },
+ { HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID },
+ { HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR }
+};
+
static struct hid_driver plantronics_driver = {
.name = "plantronics",
.id_table = plantronics_devices,
+ .usage_table = plantronics_usages,
.input_mapping = plantronics_input_mapping,
+ .event = plantronics_event,
.probe = plantronics_probe,
};
module_hid_driver(plantronics_driver);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index ef702b3f56e3..3e33eb14118c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -262,6 +262,8 @@ struct hid_item {
#define HID_CP_SELECTION 0x000c0080
#define HID_CP_MEDIASELECTION 0x000c0087
#define HID_CP_SELECTDISC 0x000c00ba
+#define HID_CP_VOLUMEUP 0x000c00e9
+#define HID_CP_VOLUMEDOWN 0x000c00ea
#define HID_CP_PLAYBACKSPEED 0x000c00f1
#define HID_CP_PROXIMITY 0x000c0109
#define HID_CP_SPEAKERSYSTEM 0x000c0160
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 439/677] perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (437 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 438/677] HID: plantronics: Workaround for double volume key presses Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 440/677] ASoC: Intel: boards: sof-wm8804: add check for PLL setting Greg Kroah-Hartman
` (244 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Li, Alexander Shishkin,
Ingo Molnar, Jiri Olsa, Mark Rutland, Namhyung Kim,
Peter Zijlstra, Srikar Dronamraju, Arnaldo Carvalho de Melo,
Sasha Levin
From: Arnaldo Carvalho de Melo <acme@redhat.com>
[ Upstream commit 210e4c89ef61432040c6cd828fefa441f4887186 ]
The 'ret' variable was initialized to zero but then it was not updated
from the fprintf() return, fix it.
Reported-by: Yang Li <yang.lee@linux.alibaba.com>
cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
cc: Ingo Molnar <mingo@redhat.com>
cc: Jiri Olsa <jolsa@redhat.com>
cc: Mark Rutland <mark.rutland@arm.com>
cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fixes: 90f18e63fbd00513 ("perf symbols: List symbols in a dso in ascending name order")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/symbol_fprintf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/symbol_fprintf.c b/tools/perf/util/symbol_fprintf.c
index 35c936ce33ef..2664fb65e47a 100644
--- a/tools/perf/util/symbol_fprintf.c
+++ b/tools/perf/util/symbol_fprintf.c
@@ -68,7 +68,7 @@ size_t dso__fprintf_symbols_by_name(struct dso *dso,
for (nd = rb_first_cached(&dso->symbol_names); nd; nd = rb_next(nd)) {
pos = rb_entry(nd, struct symbol_name_rb_node, rb_node);
- fprintf(fp, "%s\n", pos->sym.name);
+ ret += fprintf(fp, "%s\n", pos->sym.name);
}
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 440/677] ASoC: Intel: boards: sof-wm8804: add check for PLL setting
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (438 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 439/677] perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 441/677] ASoC: Intel: Skylake: Compile when any configuration is selected Greg Kroah-Hartman
` (243 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Pierre-Louis Bossart,
Mark Brown, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 1730ef62874dbdc53dc2abfa430f09f0b304bafc ]
Currently the return from snd_soc_dai_set_pll is not checking for
failure, this is the only driver in the kernel that ignores this,
so it probably should be added for sake of completeness. Fix this
by adding an error return check.
Addresses-Coverity: ("Unchecked return value")
Fixes: f139546fb7d4 ("ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210226185653.1071321-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/sof_wm8804.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/sof_wm8804.c b/sound/soc/intel/boards/sof_wm8804.c
index a46ba13e8eb0..6a181e45143d 100644
--- a/sound/soc/intel/boards/sof_wm8804.c
+++ b/sound/soc/intel/boards/sof_wm8804.c
@@ -124,7 +124,11 @@ static int sof_wm8804_hw_params(struct snd_pcm_substream *substream,
}
snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
- snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
+ ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
+ if (ret < 0) {
+ dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n");
+ return ret;
+ }
ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
sysclk, SND_SOC_CLOCK_OUT);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 441/677] ASoC: Intel: Skylake: Compile when any configuration is selected
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (439 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 440/677] ASoC: Intel: boards: sof-wm8804: add check for PLL setting Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 442/677] RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr Greg Kroah-Hartman
` (242 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng,
Amadeusz Sławiński, Cezary Rojewski, Mark Brown,
Sasha Levin
From: Cezary Rojewski <cezary.rojewski@intel.com>
[ Upstream commit 1b99d50b9709a2cddaba4a7faf1862b4f7bec865 ]
Skylake is dependent on SND_SOC_INTEL_SKYLAKE (aka "all SST platforms")
whereas selecting specific configuration such as KBL-only will not
cause driver code to compile. Switch to SND_SOC_INTEL_SKYLAKE_COMMON
dependency so selecting any configuration causes the driver to be built.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Fixes: 35bc99aaa1a3 ("ASoC: Intel: Skylake: Add more platform granularity")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210125115441.10383-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/Makefile | 2 +-
sound/soc/intel/skylake/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile
index 4e0248d2accc..7c5038803be7 100644
--- a/sound/soc/intel/Makefile
+++ b/sound/soc/intel/Makefile
@@ -5,7 +5,7 @@ obj-$(CONFIG_SND_SOC) += common/
# Platform Support
obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += atom/
obj-$(CONFIG_SND_SOC_INTEL_CATPT) += catpt/
-obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += skylake/
+obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON) += skylake/
obj-$(CONFIG_SND_SOC_INTEL_KEEMBAY) += keembay/
# Machine support
diff --git a/sound/soc/intel/skylake/Makefile b/sound/soc/intel/skylake/Makefile
index dd39149b89b1..1c4649bccec5 100644
--- a/sound/soc/intel/skylake/Makefile
+++ b/sound/soc/intel/skylake/Makefile
@@ -7,7 +7,7 @@ ifdef CONFIG_DEBUG_FS
snd-soc-skl-objs += skl-debug.o
endif
-obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += snd-soc-skl.o
+obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON) += snd-soc-skl.o
#Skylake Clock device support
snd-soc-skl-ssp-clk-objs := skl-ssp-clk.o
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 442/677] RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (440 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 441/677] ASoC: Intel: Skylake: Compile when any configuration is selected Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 443/677] RDMA/mlx5: Fix query RoCE port Greg Kroah-Hartman
` (241 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leon Romanovsky, Jason Gunthorpe,
Sasha Levin
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit a639e66703ee45745dc4057c7c2013ed9e1963a7 ]
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP
related fields are zero'd. This is true if the MR was just allocated, but
if the MR is recycled through the cache then the values are never zero'd.
This causes a bug in the odp_stats, they don't reset when the MR is
reallocated, also is_odp_implicit is never 0'd.
So we can use memset on a block of the mlx5_ib_mr reorganize the structure
to put all the data that can be zero'd by the cache at the end.
It is organized as an anonymous struct because the next patch will make
this a union.
Delete the unused smr_info. Don't set the kernel only desc_size on the
user path. No longer any need to zero mr->parent before freeing it, the
memset() will get it now.
Fixes: a3de94e3d61e ("IB/mlx5: Introduce ODP diagnostic counters")
Link: https://lore.kernel.org/r/20210304120745.1090751-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/mlx5_ib.h | 103 ++++++++++++++++-----------
drivers/infiniband/hw/mlx5/mr.c | 14 ++--
drivers/infiniband/hw/mlx5/odp.c | 1 -
3 files changed, 66 insertions(+), 52 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 88cc26e008fc..b085c02b53d0 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -547,11 +547,6 @@ static inline const struct mlx5_umr_wr *umr_wr(const struct ib_send_wr *wr)
return container_of(wr, struct mlx5_umr_wr, wr);
}
-struct mlx5_shared_mr_info {
- int mr_id;
- struct ib_umem *umem;
-};
-
enum mlx5_ib_cq_pr_flags {
MLX5_IB_CQ_PR_FLAGS_CQE_128_PAD = 1 << 0,
};
@@ -654,47 +649,69 @@ struct mlx5_ib_dm {
atomic64_add(value, &((mr)->odp_stats.counter_name))
struct mlx5_ib_mr {
- struct ib_mr ibmr;
- void *descs;
- dma_addr_t desc_map;
- int ndescs;
- int data_length;
- int meta_ndescs;
- int meta_length;
- int max_descs;
- int desc_size;
- int access_mode;
- unsigned int page_shift;
- struct mlx5_core_mkey mmkey;
- struct ib_umem *umem;
- struct mlx5_shared_mr_info *smr_info;
- struct list_head list;
- struct mlx5_cache_ent *cache_ent;
- u32 out[MLX5_ST_SZ_DW(create_mkey_out)];
- struct mlx5_core_sig_ctx *sig;
- void *descs_alloc;
- int access_flags; /* Needed for rereg MR */
-
- struct mlx5_ib_mr *parent;
- /* Needed for IB_MR_TYPE_INTEGRITY */
- struct mlx5_ib_mr *pi_mr;
- struct mlx5_ib_mr *klm_mr;
- struct mlx5_ib_mr *mtt_mr;
- u64 data_iova;
- u64 pi_iova;
-
- /* For ODP and implicit */
- struct xarray implicit_children;
- union {
- struct list_head elm;
- struct work_struct work;
- } odp_destroy;
- struct ib_odp_counters odp_stats;
- bool is_odp_implicit;
+ struct ib_mr ibmr;
+ struct mlx5_core_mkey mmkey;
- struct mlx5_async_work cb_work;
+ /* User MR data */
+ struct mlx5_cache_ent *cache_ent;
+ struct ib_umem *umem;
+
+ /* This is zero'd when the MR is allocated */
+ struct {
+ /* Used only while the MR is in the cache */
+ struct {
+ u32 out[MLX5_ST_SZ_DW(create_mkey_out)];
+ struct mlx5_async_work cb_work;
+ /* Cache list element */
+ struct list_head list;
+ };
+
+ /* Used only by kernel MRs (umem == NULL) */
+ struct {
+ void *descs;
+ void *descs_alloc;
+ dma_addr_t desc_map;
+ int max_descs;
+ int ndescs;
+ int desc_size;
+ int access_mode;
+
+ /* For Kernel IB_MR_TYPE_INTEGRITY */
+ struct mlx5_core_sig_ctx *sig;
+ struct mlx5_ib_mr *pi_mr;
+ struct mlx5_ib_mr *klm_mr;
+ struct mlx5_ib_mr *mtt_mr;
+ u64 data_iova;
+ u64 pi_iova;
+ int meta_ndescs;
+ int meta_length;
+ int data_length;
+ };
+
+ /* Used only by User MRs (umem != NULL) */
+ struct {
+ unsigned int page_shift;
+ /* Current access_flags */
+ int access_flags;
+
+ /* For User ODP */
+ struct mlx5_ib_mr *parent;
+ struct xarray implicit_children;
+ union {
+ struct work_struct work;
+ } odp_destroy;
+ struct ib_odp_counters odp_stats;
+ bool is_odp_implicit;
+ };
+ };
};
+/* Zero the fields in the mr that are variant depending on usage */
+static inline void mlx5_clear_mr(struct mlx5_ib_mr *mr)
+{
+ memset(mr->out, 0, sizeof(*mr) - offsetof(struct mlx5_ib_mr, out));
+}
+
static inline bool is_odp_mr(struct mlx5_ib_mr *mr)
{
return IS_ENABLED(CONFIG_INFINIBAND_ON_DEMAND_PAGING) && mr->umem &&
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index db05b0e0a8d7..ea8f068a6da3 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -590,6 +590,8 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(struct mlx5_ib_dev *dev,
ent->available_mrs--;
queue_adjust_cache_locked(ent);
spin_unlock_irq(&ent->lock);
+
+ mlx5_clear_mr(mr);
}
mr->access_flags = access_flags;
return mr;
@@ -615,16 +617,14 @@ static struct mlx5_ib_mr *get_cache_mr(struct mlx5_cache_ent *req_ent)
ent->available_mrs--;
queue_adjust_cache_locked(ent);
spin_unlock_irq(&ent->lock);
- break;
+ mlx5_clear_mr(mr);
+ return mr;
}
queue_adjust_cache_locked(ent);
spin_unlock_irq(&ent->lock);
}
-
- if (!mr)
- req_ent->miss++;
-
- return mr;
+ req_ent->miss++;
+ return NULL;
}
static void detach_mr_from_cache(struct mlx5_ib_mr *mr)
@@ -993,8 +993,6 @@ static struct mlx5_ib_mr *alloc_cacheable_mr(struct ib_pd *pd,
mr->ibmr.pd = pd;
mr->umem = umem;
- mr->access_flags = access_flags;
- mr->desc_size = sizeof(struct mlx5_mtt);
mr->mmkey.iova = iova;
mr->mmkey.size = umem->length;
mr->mmkey.pd = to_mpd(pd)->pdn;
diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c
index b103555b1f5d..d98755e78362 100644
--- a/drivers/infiniband/hw/mlx5/odp.c
+++ b/drivers/infiniband/hw/mlx5/odp.c
@@ -227,7 +227,6 @@ static void free_implicit_child_mr(struct mlx5_ib_mr *mr, bool need_imr_xlt)
dma_fence_odp_mr(mr);
- mr->parent = NULL;
mlx5_mr_cache_free(mr_to_mdev(mr), mr);
ib_umem_odp_release(odp);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 443/677] RDMA/mlx5: Fix query RoCE port
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (441 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 442/677] RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 444/677] RDMA/mlx5: Fix mlx5 rates to IB rates map Greg Kroah-Hartman
` (240 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maor Gottlieb, Leon Romanovsky,
Jason Gunthorpe, Sasha Levin
From: Maor Gottlieb <maorg@nvidia.com>
[ Upstream commit 7852546f524595245382a919e752468f73421451 ]
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it
should be used only when driver is loaded. Instead we just need to read
the roce_en field.
In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled.
Fixes: 7a58779edd75 ("IB/mlx5: Improve query port for representor port")
Link: https://lore.kernel.org/r/20210304124517.1100608-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/main.c | 6 +++---
include/linux/mlx5/driver.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 0d69a697d75f..4be7bccefaa4 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -499,7 +499,7 @@ static int mlx5_query_port_roce(struct ib_device *device, u8 port_num,
translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
&props->active_width, ext);
- if (!dev->is_rep && mlx5_is_roce_enabled(mdev)) {
+ if (!dev->is_rep && dev->mdev->roce.roce_en) {
u16 qkey_viol_cntr;
props->port_cap_flags |= IB_PORT_CM_SUP;
@@ -4174,7 +4174,7 @@ static int mlx5_ib_roce_init(struct mlx5_ib_dev *dev)
/* Register only for native ports */
err = mlx5_add_netdev_notifier(dev, port_num);
- if (err || dev->is_rep || !mlx5_is_roce_enabled(mdev))
+ if (err || dev->is_rep || !mlx5_is_roce_init_enabled(mdev))
/*
* We don't enable ETH interface for
* 1. IB representors
@@ -4711,7 +4711,7 @@ static int mlx5r_probe(struct auxiliary_device *adev,
dev->mdev = mdev;
dev->num_ports = num_ports;
- if (ll == IB_LINK_LAYER_ETHERNET && !mlx5_is_roce_enabled(mdev))
+ if (ll == IB_LINK_LAYER_ETHERNET && !mlx5_is_roce_init_enabled(mdev))
profile = &raw_eth_profile;
else
profile = &pf_profile;
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 53b89631a1d9..ab07f09f2bad 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1226,7 +1226,7 @@ enum {
MLX5_TRIGGERED_CMD_COMP = (u64)1 << 32,
};
-static inline bool mlx5_is_roce_enabled(struct mlx5_core_dev *dev)
+static inline bool mlx5_is_roce_init_enabled(struct mlx5_core_dev *dev)
{
struct devlink *devlink = priv_to_devlink(dev);
union devlink_param_value val;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 444/677] RDMA/mlx5: Fix mlx5 rates to IB rates map
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (442 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 443/677] RDMA/mlx5: Fix query RoCE port Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 445/677] net/mlx5: DR, Add missing vhca_id consume from STEv1 Greg Kroah-Hartman
` (239 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Zhang, Maor Gottlieb,
Leon Romanovsky, Jason Gunthorpe, Sasha Levin
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit 6fe6e568639859db960c8fcef19a2ece1c2d7eae ]
Correct the map between mlx5 rates and corresponding ib rates, as they
don't always have a fixed offset between them.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210304124517.1100608-4-leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/qp.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index f5a52a6fae43..843f9e7fe96f 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3146,6 +3146,19 @@ enum {
MLX5_PATH_FLAG_COUNTER = 1 << 2,
};
+static int mlx5_to_ib_rate_map(u8 rate)
+{
+ static const int rates[] = { IB_RATE_PORT_CURRENT, IB_RATE_56_GBPS,
+ IB_RATE_25_GBPS, IB_RATE_100_GBPS,
+ IB_RATE_200_GBPS, IB_RATE_50_GBPS,
+ IB_RATE_400_GBPS };
+
+ if (rate < ARRAY_SIZE(rates))
+ return rates[rate];
+
+ return rate - MLX5_STAT_RATE_OFFSET;
+}
+
static int ib_to_mlx5_rate_map(u8 rate)
{
switch (rate) {
@@ -4485,7 +4498,7 @@ static void to_rdma_ah_attr(struct mlx5_ib_dev *ibdev,
rdma_ah_set_path_bits(ah_attr, MLX5_GET(ads, path, mlid));
static_rate = MLX5_GET(ads, path, stat_rate);
- rdma_ah_set_static_rate(ah_attr, static_rate ? static_rate - 5 : 0);
+ rdma_ah_set_static_rate(ah_attr, mlx5_to_ib_rate_map(static_rate));
if (MLX5_GET(ads, path, grh) ||
ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
rdma_ah_set_grh(ah_attr, NULL, MLX5_GET(ads, path, flow_label),
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 445/677] net/mlx5: DR, Add missing vhca_id consume from STEv1
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (443 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 444/677] RDMA/mlx5: Fix mlx5 rates to IB rates map Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 446/677] wilc1000: write value to WILC_INTR2_ENABLE register Greg Kroah-Hartman
` (238 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alex Vesker, Yevgeny Kliteynik,
Alex Vesker, Saeed Mahameed, Sasha Levin
From: Yevgeny Kliteynik <kliteyn@nvidia.com>
[ Upstream commit cc82a2e6c8af956d894fa58a040dc0d532dd9978 ]
The field source_eswitch_owner_vhca_id was not consumed
in the same way as in STEv0. Added the missing set.
Fixes: 10b694186410 ("net/mlx5: DR, Add HW STEv1 match logic")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c
index 9143ec326ebf..f146c618a78e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste_v1.c
@@ -1532,6 +1532,7 @@ static void dr_ste_v1_build_src_gvmi_qpn_bit_mask(struct mlx5dr_match_param *val
DR_STE_SET_ONES(src_gvmi_qp_v1, bit_mask, source_gvmi, misc_mask, source_port);
DR_STE_SET_ONES(src_gvmi_qp_v1, bit_mask, source_qp, misc_mask, source_sqn);
+ misc_mask->source_eswitch_owner_vhca_id = 0;
}
static int dr_ste_v1_build_src_gvmi_qpn_tag(struct mlx5dr_match_param *value,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 446/677] wilc1000: write value to WILC_INTR2_ENABLE register
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (444 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 445/677] net/mlx5: DR, Add missing vhca_id consume from STEv1 Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 447/677] KVM: x86/mmu: Retry page faults that hit an invalid memslot Greg Kroah-Hartman
` (237 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marcus Folkesson, Kalle Valo, Sasha Levin
From: Marcus Folkesson <marcus.folkesson@gmail.com>
[ Upstream commit e21b6e5a54628cd3935f200049d4430c25c54e03 ]
Write the value instead of reading it twice.
Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210224163706.519658-1-marcus.folkesson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/microchip/wilc1000/sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 351ff909ab1c..e14b9fc2c67a 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -947,7 +947,7 @@ static int wilc_sdio_sync_ext(struct wilc *wilc, int nint)
for (i = 0; (i < 3) && (nint > 0); i++, nint--)
reg |= BIT(i);
- ret = wilc_sdio_read_reg(wilc, WILC_INTR2_ENABLE, ®);
+ ret = wilc_sdio_write_reg(wilc, WILC_INTR2_ENABLE, reg);
if (ret) {
dev_err(&func->dev,
"Failed write reg (%08x)...\n",
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 447/677] KVM: x86/mmu: Retry page faults that hit an invalid memslot
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (445 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 446/677] wilc1000: write value to WILC_INTR2_ENABLE register Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 448/677] Bluetooth: avoid deadlock between hci_dev->lock and socket lock Greg Kroah-Hartman
` (236 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ben Gardon, Sean Christopherson,
Paolo Bonzini, Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit e0c378684b6545ad2d4403bb701d0ac4932b4e95 ]
Retry page faults (re-enter the guest) that hit an invalid memslot
instead of treating the memslot as not existing, i.e. handling the
page fault as an MMIO access. When deleting a memslot, SPTEs aren't
zapped and the TLBs aren't flushed until after the memslot has been
marked invalid.
Handling the invalid slot as MMIO means there's a small window where a
page fault could replace a valid SPTE with an MMIO SPTE. The legacy
MMU handles such a scenario cleanly, but the TDP MMU assumes such
behavior is impossible (see the BUG() in __handle_changed_spte()).
There's really no good reason why the legacy MMU should allow such a
scenario, and closing this hole allows for additional cleanups.
Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/mmu/mmu.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 4d37dfc0d3a8..cd0faa187674 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3665,6 +3665,14 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
bool async;
+ /*
+ * Retry the page fault if the gfn hit a memslot that is being deleted
+ * or moved. This ensures any existing SPTEs for the old memslot will
+ * be zapped before KVM inserts a new MMIO SPTE for the gfn.
+ */
+ if (slot && (slot->flags & KVM_MEMSLOT_INVALID))
+ return true;
+
/* Don't expose private memslots to L2. */
if (is_guest_mode(vcpu) && !kvm_is_visible_memslot(slot)) {
*pfn = KVM_PFN_NOSLOT;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 448/677] Bluetooth: avoid deadlock between hci_dev->lock and socket lock
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (446 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 447/677] KVM: x86/mmu: Retry page faults that hit an invalid memslot Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 449/677] net: lapbether: Prevent racing when checking whether the netif is running Greg Kroah-Hartman
` (235 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Kosina, Marcel Holtmann, Sasha Levin
From: Jiri Kosina <jkosina@suse.cz>
[ Upstream commit 17486960d79b900c45e0bb8fbcac0262848582ba ]
Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a
dependency between socket lock and hci_dev->lock that could lead to
deadlock.
It turns out that hci_conn_get_phy() is not in any way relying on hdev
being immutable during the runtime of this function, neither does it even
look at any of the members of hdev, and as such there is no need to hold
that lock.
This fixes the lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc1-00026-g73d464503354 #10 Not tainted
------------------------------------------------------
bluetoothd/1118 is trying to acquire lock:
ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth]
but task is already holding lock:
ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}:
lock_sock_nested+0x72/0xa0
l2cap_sock_ready_cb+0x18/0x70 [bluetooth]
l2cap_config_rsp+0x27a/0x520 [bluetooth]
l2cap_sig_channel+0x658/0x1330 [bluetooth]
l2cap_recv_frame+0x1ba/0x310 [bluetooth]
hci_rx_work+0x1cc/0x640 [bluetooth]
process_one_work+0x244/0x5f0
worker_thread+0x3c/0x380
kthread+0x13e/0x160
ret_from_fork+0x22/0x30
-> #2 (&chan->lock#2/1){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x33a/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (&conn->chan_lock){+.+.}-{3:3}:
__mutex_lock+0xa3/0xa10
l2cap_chan_connect+0x322/0x940 [bluetooth]
l2cap_sock_connect+0x141/0x2a0 [bluetooth]
__sys_connect+0x9b/0xc0
__x64_sys_connect+0x16/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&hdev->lock){+.+.}-{3:3}:
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
__mutex_lock+0xa3/0xa10
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
&hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&chan->lock#2/1);
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock(&hdev->lock);
*** DEADLOCK ***
1 lock held by bluetoothd/1118:
#0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth]
stack backtrace:
CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
Call Trace:
dump_stack+0x7f/0xa1
check_noncircular+0x105/0x120
? __lock_acquire+0x147a/0x1a50
__lock_acquire+0x147a/0x1a50
lock_acquire+0x277/0x3d0
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? __lock_acquire+0x2e1/0x1a50
? lock_is_held_type+0xb4/0x120
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
__mutex_lock+0xa3/0xa10
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
? lock_acquire+0x277/0x3d0
? mark_held_locks+0x49/0x70
? mark_held_locks+0x49/0x70
? hci_conn_get_phy+0x1c/0x150 [bluetooth]
hci_conn_get_phy+0x1c/0x150 [bluetooth]
l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth]
__sys_getsockopt+0xcc/0x200
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb73df33eee
Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee
RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018
RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000
R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000
R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_conn.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 6ffa89e3ba0a..f72646690539 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1830,8 +1830,6 @@ u32 hci_conn_get_phy(struct hci_conn *conn)
{
u32 phys = 0;
- hci_dev_lock(conn->hdev);
-
/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
* Table 6.2: Packets defined for synchronous, asynchronous, and
* CSB logical transport types.
@@ -1928,7 +1926,5 @@ u32 hci_conn_get_phy(struct hci_conn *conn)
break;
}
- hci_dev_unlock(conn->hdev);
-
return phys;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 449/677] net: lapbether: Prevent racing when checking whether the netif is running
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (447 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 448/677] Bluetooth: avoid deadlock between hci_dev->lock and socket lock Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 450/677] libbpf: Add explicit padding to bpf_xdp_set_link_opts Greg Kroah-Hartman
` (234 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xie He, Martin Schiller,
David S. Miller, Sasha Levin
From: Xie He <xie.he.0141@gmail.com>
[ Upstream commit 5acd0cfbfbb5a688da1bfb1a2152b0c855115a35 ]
There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.
However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).
This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wan/lapbether.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index c3372498f4f1..8fda0446ff71 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -51,6 +51,8 @@ struct lapbethdev {
struct list_head node;
struct net_device *ethdev; /* link to ethernet device */
struct net_device *axdev; /* lapbeth device (lapb#) */
+ bool up;
+ spinlock_t up_lock; /* Protects "up" */
};
static LIST_HEAD(lapbeth_devices);
@@ -101,8 +103,9 @@ static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
rcu_read_lock();
lapbeth = lapbeth_get_x25_dev(dev);
if (!lapbeth)
- goto drop_unlock;
- if (!netif_running(lapbeth->axdev))
+ goto drop_unlock_rcu;
+ spin_lock_bh(&lapbeth->up_lock);
+ if (!lapbeth->up)
goto drop_unlock;
len = skb->data[0] + skb->data[1] * 256;
@@ -117,11 +120,14 @@ static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
goto drop_unlock;
}
out:
+ spin_unlock_bh(&lapbeth->up_lock);
rcu_read_unlock();
return 0;
drop_unlock:
kfree_skb(skb);
goto out;
+drop_unlock_rcu:
+ rcu_read_unlock();
drop:
kfree_skb(skb);
return 0;
@@ -151,13 +157,11 @@ static int lapbeth_data_indication(struct net_device *dev, struct sk_buff *skb)
static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
- /*
- * Just to be *really* sure not to send anything if the interface
- * is down, the ethernet device may have gone.
- */
- if (!netif_running(dev))
+ spin_lock_bh(&lapbeth->up_lock);
+ if (!lapbeth->up)
goto drop;
/* There should be a pseudo header of 1 byte added by upper layers.
@@ -194,6 +198,7 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
goto drop;
}
out:
+ spin_unlock_bh(&lapbeth->up_lock);
return NETDEV_TX_OK;
drop:
kfree_skb(skb);
@@ -285,6 +290,7 @@ static const struct lapb_register_struct lapbeth_callbacks = {
*/
static int lapbeth_open(struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
if ((err = lapb_register(dev, &lapbeth_callbacks)) != LAPB_OK) {
@@ -292,13 +298,22 @@ static int lapbeth_open(struct net_device *dev)
return -ENODEV;
}
+ spin_lock_bh(&lapbeth->up_lock);
+ lapbeth->up = true;
+ spin_unlock_bh(&lapbeth->up_lock);
+
return 0;
}
static int lapbeth_close(struct net_device *dev)
{
+ struct lapbethdev *lapbeth = netdev_priv(dev);
int err;
+ spin_lock_bh(&lapbeth->up_lock);
+ lapbeth->up = false;
+ spin_unlock_bh(&lapbeth->up_lock);
+
if ((err = lapb_unregister(dev)) != LAPB_OK)
pr_err("lapb_unregister error: %d\n", err);
@@ -356,6 +371,9 @@ static int lapbeth_new_device(struct net_device *dev)
dev_hold(dev);
lapbeth->ethdev = dev;
+ lapbeth->up = false;
+ spin_lock_init(&lapbeth->up_lock);
+
rc = -EIO;
if (register_netdevice(ndev))
goto fail;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 450/677] libbpf: Add explicit padding to bpf_xdp_set_link_opts
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (448 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 449/677] net: lapbether: Prevent racing when checking whether the netif is running Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 451/677] bpftool: Fix maybe-uninitialized warnings Greg Kroah-Hartman
` (233 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, Alexei Starovoitov,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit dde7b3f5f2f458297aeccfd4783e53ab8ca046db ]
Adding such anonymous padding fixes the issue with uninitialized portions of
bpf_xdp_set_link_opts when using LIBBPF_DECLARE_OPTS macro with inline field
initialization:
DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts, .old_fd = -1);
When such code is compiled in debug mode, compiler is generating code that
leaves padding bytes uninitialized, which triggers error inside libbpf APIs
that do strict zero initialization checks for OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes: bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/libbpf.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h
index 3c35eb401931..3d690d4e785c 100644
--- a/tools/lib/bpf/libbpf.h
+++ b/tools/lib/bpf/libbpf.h
@@ -507,6 +507,7 @@ struct xdp_link_info {
struct bpf_xdp_set_link_opts {
size_t sz;
int old_fd;
+ size_t :0;
};
#define bpf_xdp_set_link_opts__last_field old_fd
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 451/677] bpftool: Fix maybe-uninitialized warnings
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (449 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 450/677] libbpf: Add explicit padding to bpf_xdp_set_link_opts Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 452/677] iommu: Check dev->iommu in iommu_dev_xxx functions Greg Kroah-Hartman
` (232 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, Alexei Starovoitov,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit 4bbb3583687051ef99966ddaeb1730441b777d40 ]
Somehow when bpftool is compiled in -Og mode, compiler produces new warnings
about possibly uninitialized variables. Fix all the reported problems.
Fixes: 2119f2189df1 ("bpftool: add C output format option to btf dump subcommand")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/bpf/bpftool/btf.c | 3 +++
tools/bpf/bpftool/main.c | 3 +--
tools/bpf/bpftool/map.c | 2 +-
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/bpf/bpftool/btf.c b/tools/bpf/bpftool/btf.c
index fe9e7b3a4b50..1326fff3629b 100644
--- a/tools/bpf/bpftool/btf.c
+++ b/tools/bpf/bpftool/btf.c
@@ -538,6 +538,7 @@ static int do_dump(int argc, char **argv)
NEXT_ARG();
if (argc < 1) {
p_err("expecting value for 'format' option\n");
+ err = -EINVAL;
goto done;
}
if (strcmp(*argv, "c") == 0) {
@@ -547,11 +548,13 @@ static int do_dump(int argc, char **argv)
} else {
p_err("unrecognized format specifier: '%s', possible values: raw, c",
*argv);
+ err = -EINVAL;
goto done;
}
NEXT_ARG();
} else {
p_err("unrecognized option: '%s'", *argv);
+ err = -EINVAL;
goto done;
}
}
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
index b86f450e6fce..d9afb730136a 100644
--- a/tools/bpf/bpftool/main.c
+++ b/tools/bpf/bpftool/main.c
@@ -276,7 +276,7 @@ static int do_batch(int argc, char **argv)
int n_argc;
FILE *fp;
char *cp;
- int err;
+ int err = 0;
int i;
if (argc < 2) {
@@ -370,7 +370,6 @@ static int do_batch(int argc, char **argv)
} else {
if (!json_output)
printf("processed %d commands\n", lines);
- err = 0;
}
err_close:
if (fp != stdin)
diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c
index b400364ee054..09ae0381205b 100644
--- a/tools/bpf/bpftool/map.c
+++ b/tools/bpf/bpftool/map.c
@@ -100,7 +100,7 @@ static int do_dump_btf(const struct btf_dumper *d,
void *value)
{
__u32 value_id;
- int ret;
+ int ret = 0;
/* start of key-value pair */
jsonw_start_object(d->jw);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 452/677] iommu: Check dev->iommu in iommu_dev_xxx functions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (450 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 451/677] bpftool: Fix maybe-uninitialized warnings Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 453/677] iommu/dma: Resurrect the "forcedac" option Greg Kroah-Hartman
` (231 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shameer Kolothum, Robin Murphy,
Joerg Roedel, Sasha Levin
From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
[ Upstream commit b9abb19fa5fd2d8a4be61c6cd4b2a48aa1a17f9c ]
The device iommu probe/attach might have failed leaving dev->iommu
to NULL and device drivers may still invoke these functions resulting
in a crash in iommu vendor driver code.
Hence make sure we check that.
Fixes: a3a195929d40 ("iommu: Add APIs for multiple domains per device")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210303173611.520-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/iommu.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index d0b0a15dba84..e10cfa99057c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2878,10 +2878,12 @@ EXPORT_SYMBOL_GPL(iommu_fwspec_add_ids);
*/
int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat)
{
- const struct iommu_ops *ops = dev->bus->iommu_ops;
+ if (dev->iommu && dev->iommu->iommu_dev) {
+ const struct iommu_ops *ops = dev->iommu->iommu_dev->ops;
- if (ops && ops->dev_enable_feat)
- return ops->dev_enable_feat(dev, feat);
+ if (ops->dev_enable_feat)
+ return ops->dev_enable_feat(dev, feat);
+ }
return -ENODEV;
}
@@ -2894,10 +2896,12 @@ EXPORT_SYMBOL_GPL(iommu_dev_enable_feature);
*/
int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat)
{
- const struct iommu_ops *ops = dev->bus->iommu_ops;
+ if (dev->iommu && dev->iommu->iommu_dev) {
+ const struct iommu_ops *ops = dev->iommu->iommu_dev->ops;
- if (ops && ops->dev_disable_feat)
- return ops->dev_disable_feat(dev, feat);
+ if (ops->dev_disable_feat)
+ return ops->dev_disable_feat(dev, feat);
+ }
return -EBUSY;
}
@@ -2905,10 +2909,12 @@ EXPORT_SYMBOL_GPL(iommu_dev_disable_feature);
bool iommu_dev_feature_enabled(struct device *dev, enum iommu_dev_features feat)
{
- const struct iommu_ops *ops = dev->bus->iommu_ops;
+ if (dev->iommu && dev->iommu->iommu_dev) {
+ const struct iommu_ops *ops = dev->iommu->iommu_dev->ops;
- if (ops && ops->dev_feat_enabled)
- return ops->dev_feat_enabled(dev, feat);
+ if (ops->dev_feat_enabled)
+ return ops->dev_feat_enabled(dev, feat);
+ }
return false;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 453/677] iommu/dma: Resurrect the "forcedac" option
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (451 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 452/677] iommu: Check dev->iommu in iommu_dev_xxx functions Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 454/677] iommu/vt-d: Reject unsupported page request modes Greg Kroah-Hartman
` (230 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Robin Murphy, Lu Baolu, John Garry,
Joerg Roedel, Sasha Levin
From: Robin Murphy <robin.murphy@arm.com>
[ Upstream commit 3542dcb15cef66c0b9e6c3b33168eb657e0d9520 ]
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/admin-guide/kernel-parameters.txt | 15 ++++++++-------
drivers/iommu/dma-iommu.c | 13 ++++++++++++-
drivers/iommu/intel/iommu.c | 5 ++---
include/linux/dma-iommu.h | 2 ++
4 files changed, 24 insertions(+), 11 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 04545725f187..835f810f2f26 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1869,13 +1869,6 @@
bypassed by not enabling DMAR with this option. In
this case, gfx device will use physical address for
DMA.
- forcedac [X86-64]
- With this option iommu will not optimize to look
- for io virtual address below 32-bit forcing dual
- address cycle on pci bus for cards supporting greater
- than 32-bit addressing. The default is to look
- for translation below 32-bit and if not available
- then look in the higher range.
strict [Default Off]
With this option on every unmap_single operation will
result in a hardware IOTLB flush operation as opposed
@@ -1964,6 +1957,14 @@
nobypass [PPC/POWERNV]
Disable IOMMU bypass, using IOMMU for PCI devices.
+ iommu.forcedac= [ARM64, X86] Control IOVA allocation for PCI devices.
+ Format: { "0" | "1" }
+ 0 - Try to allocate a 32-bit DMA address first, before
+ falling back to the full range if needed.
+ 1 - Allocate directly from the full usable range,
+ forcing Dual Address Cycle for PCI cards supporting
+ greater than 32-bit addressing.
+
iommu.strict= [ARM64] Configure TLB invalidation behaviour
Format: { "0" | "1" }
0 - Lazy mode.
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index af765c813cc8..fdd095e1fa52 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -52,6 +52,17 @@ struct iommu_dma_cookie {
};
static DEFINE_STATIC_KEY_FALSE(iommu_deferred_attach_enabled);
+bool iommu_dma_forcedac __read_mostly;
+
+static int __init iommu_dma_forcedac_setup(char *str)
+{
+ int ret = kstrtobool(str, &iommu_dma_forcedac);
+
+ if (!ret && iommu_dma_forcedac)
+ pr_info("Forcing DAC for PCI devices\n");
+ return ret;
+}
+early_param("iommu.forcedac", iommu_dma_forcedac_setup);
void iommu_dma_free_cpu_cached_iovas(unsigned int cpu,
struct iommu_domain *domain)
@@ -444,7 +455,7 @@ static dma_addr_t iommu_dma_alloc_iova(struct iommu_domain *domain,
dma_limit = min(dma_limit, (u64)domain->geometry.aperture_end);
/* Try to get PCI devices a SAC address */
- if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev))
+ if (dma_limit > DMA_BIT_MASK(32) && !iommu_dma_forcedac && dev_is_pci(dev))
iova = alloc_iova_fast(iovad, iova_len,
DMA_BIT_MASK(32) >> shift, false);
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 881c9f2a5c7d..66fab7944b39 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -360,7 +360,6 @@ int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
-static int dmar_forcedac;
static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
static int iommu_identity_mapping;
@@ -451,8 +450,8 @@ static int __init intel_iommu_setup(char *str)
dmar_map_gfx = 0;
pr_info("Disable GFX device mapping\n");
} else if (!strncmp(str, "forcedac", 8)) {
- pr_info("Forcing DAC for PCI devices\n");
- dmar_forcedac = 1;
+ pr_warn("intel_iommu=forcedac deprecated; use iommu.forcedac instead\n");
+ iommu_dma_forcedac = true;
} else if (!strncmp(str, "strict", 6)) {
pr_info("Disable batched IOTLB flush\n");
intel_iommu_strict = 1;
diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h
index 706b68d1359b..13d1f4c14d7b 100644
--- a/include/linux/dma-iommu.h
+++ b/include/linux/dma-iommu.h
@@ -40,6 +40,8 @@ void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list);
void iommu_dma_free_cpu_cached_iovas(unsigned int cpu,
struct iommu_domain *domain);
+extern bool iommu_dma_forcedac;
+
#else /* CONFIG_IOMMU_DMA */
struct iommu_domain;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 454/677] iommu/vt-d: Reject unsupported page request modes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (452 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 453/677] iommu/dma: Resurrect the "forcedac" option Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 455/677] ASoC: tegra30: i2s: Restore hardware state on runtime PM resume Greg Kroah-Hartman
` (229 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lu Baolu, Jacob Pan, Joerg Roedel,
Sasha Levin
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
[ Upstream commit 78a523fe73b81b4447beb2d6c78c9fafae24eebb ]
When supervisor/privilige mode SVM is used, we bind init_mm.pgd with
a supervisor PASID. There should not be any page fault for init_mm.
Execution request with DMA read is also not supported.
This patch checks PRQ descriptor for both unsupported configurations,
reject them both with invalid responses.
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/svm.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 574a7e657a9a..4627437ae1c0 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -920,7 +920,17 @@ static irqreturn_t prq_event_thread(int irq, void *d)
((unsigned long long *)req)[1]);
goto no_pasid;
}
-
+ /* We shall not receive page request for supervisor SVM */
+ if (req->pm_req && (req->rd_req | req->wr_req)) {
+ pr_err("Unexpected page request in Privilege Mode");
+ /* No need to find the matching sdev as for bad_req */
+ goto no_pasid;
+ }
+ /* DMA read with exec requeset is not supported. */
+ if (req->exe_req && req->rd_req) {
+ pr_err("Execution request not supported\n");
+ goto no_pasid;
+ }
if (!svm || svm->pasid != req->pasid) {
rcu_read_lock();
svm = ioasid_find(NULL, req->pasid, NULL);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 455/677] ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (453 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 454/677] iommu/vt-d: Reject unsupported page request modes Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 456/677] net: dsa: bcm_sf2: add function finding RGMII register Greg Kroah-Hartman
` (228 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Mark Brown, Sasha Levin
From: Dmitry Osipenko <digetx@gmail.com>
[ Upstream commit 0bbcecaaab15a74ba69f93df46c753f2a64eadca ]
Tegra30 I2S driver syncs regmap cache only on resume from system suspend,
but hardware is reset across the runtime suspend because RPM of the parent
AHUB driver resets the I2S hardware, hence h/w state is lost after each
RPM resume. The problem isn't visible because hardware happens to be fully
reprogrammed after each RPM resume. Move hardware syncing to RPM resume in
order to restore h/w state properly.
Fixes: ed9ce1ed2239 ("ASoC: tegra: ahub: Reset hardware properly")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-4-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/tegra/tegra30_i2s.c | 40 +++++++++++------------------------
1 file changed, 12 insertions(+), 28 deletions(-)
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 6740df541508..3d22c1be6f3d 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -58,8 +58,18 @@ static int tegra30_i2s_runtime_resume(struct device *dev)
}
regcache_cache_only(i2s->regmap, false);
+ regcache_mark_dirty(i2s->regmap);
+
+ ret = regcache_sync(i2s->regmap);
+ if (ret)
+ goto disable_clocks;
return 0;
+
+disable_clocks:
+ clk_disable_unprepare(i2s->clk_i2s);
+
+ return ret;
}
static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
@@ -551,37 +561,11 @@ static int tegra30_i2s_platform_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int tegra30_i2s_suspend(struct device *dev)
-{
- struct tegra30_i2s *i2s = dev_get_drvdata(dev);
-
- regcache_mark_dirty(i2s->regmap);
-
- return 0;
-}
-
-static int tegra30_i2s_resume(struct device *dev)
-{
- struct tegra30_i2s *i2s = dev_get_drvdata(dev);
- int ret;
-
- ret = pm_runtime_get_sync(dev);
- if (ret < 0) {
- pm_runtime_put(dev);
- return ret;
- }
- ret = regcache_sync(i2s->regmap);
- pm_runtime_put(dev);
-
- return ret;
-}
-#endif
-
static const struct dev_pm_ops tegra30_i2s_pm_ops = {
SET_RUNTIME_PM_OPS(tegra30_i2s_runtime_suspend,
tegra30_i2s_runtime_resume, NULL)
- SET_SYSTEM_SLEEP_PM_OPS(tegra30_i2s_suspend, tegra30_i2s_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
};
static struct platform_driver tegra30_i2s_driver = {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 456/677] net: dsa: bcm_sf2: add function finding RGMII register
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (454 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 455/677] ASoC: tegra30: i2s: Restore hardware state on runtime PM resume Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 457/677] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s) Greg Kroah-Hartman
` (227 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
Florian Fainelli, David S. Miller, Sasha Levin
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit 55cfeb396965c3906a84d09a9c487d065e37773b ]
Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
1. It doesn't validate port argument
2. It doesn't support chipsets with non-lineral RGMII regs layout
Missing port validation could result in getting register offset from out
of array. Random memory -> random offset -> random reads/writes. It
affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/bcm_sf2.c | 49 +++++++++++++++++++++++++++++-----
drivers/net/dsa/bcm_sf2_regs.h | 2 --
2 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index ba5d546d06aa..cd64b7f471b5 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -32,6 +32,31 @@
#include "b53/b53_priv.h"
#include "b53/b53_regs.h"
+static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
+{
+ switch (priv->type) {
+ case BCM4908_DEVICE_ID:
+ /* TODO */
+ break;
+ default:
+ switch (port) {
+ case 0:
+ return REG_RGMII_0_CNTRL;
+ case 1:
+ return REG_RGMII_1_CNTRL;
+ case 2:
+ return REG_RGMII_2_CNTRL;
+ default:
+ break;
+ }
+ }
+
+ WARN_ONCE(1, "Unsupported port %d\n", port);
+
+ /* RO fallback reg */
+ return REG_SWITCH_STATUS;
+}
+
/* Return the number of active ports, not counting the IMP (CPU) port */
static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
{
@@ -647,6 +672,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
u32 id_mode_dis = 0, port_mode;
+ u32 reg_rgmii_ctrl;
u32 reg;
if (port == core_readl(priv, CORE_IMP0_PRT_ID))
@@ -670,10 +696,12 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
return;
}
+ reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
/* Clear id_mode_dis bit, and the existing port mode, let
* RGMII_MODE_EN bet set by mac_link_{up,down}
*/
- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg = reg_readl(priv, reg_rgmii_ctrl);
reg &= ~ID_MODE_DIS;
reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
@@ -681,13 +709,14 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
if (id_mode_dis)
reg |= ID_MODE_DIS;
- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ reg_writel(priv, reg, reg_rgmii_ctrl);
}
static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
phy_interface_t interface, bool link)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ u32 reg_rgmii_ctrl;
u32 reg;
if (!phy_interface_mode_is_rgmii(interface) &&
@@ -695,13 +724,15 @@ static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
interface != PHY_INTERFACE_MODE_REVMII)
return;
+ reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
/* If the link is down, just disable the interface to conserve power */
- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg = reg_readl(priv, reg_rgmii_ctrl);
if (link)
reg |= RGMII_MODE_EN;
else
reg &= ~RGMII_MODE_EN;
- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ reg_writel(priv, reg, reg_rgmii_ctrl);
}
static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
@@ -735,11 +766,15 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_eee *p = &priv->dev->ports[port].eee;
- u32 reg, offset;
bcm_sf2_sw_mac_link_set(ds, port, interface, true);
if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
+ u32 reg_rgmii_ctrl;
+ u32 reg, offset;
+
+ reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
if (priv->type == BCM4908_DEVICE_ID ||
priv->type == BCM7445_DEVICE_ID)
offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
@@ -750,7 +785,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
interface == PHY_INTERFACE_MODE_RGMII_TXID ||
interface == PHY_INTERFACE_MODE_MII ||
interface == PHY_INTERFACE_MODE_REVMII) {
- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ reg = reg_readl(priv, reg_rgmii_ctrl);
reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
if (tx_pause)
@@ -758,7 +793,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
if (rx_pause)
reg |= RX_PAUSE_EN;
- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ reg_writel(priv, reg, reg_rgmii_ctrl);
}
reg = SW_OVERRIDE | LINK_STS;
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 1d2d55c9f8aa..c7783cb45845 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -48,8 +48,6 @@ enum bcm_sf2_reg_offs {
#define PHY_PHYAD_SHIFT 8
#define PHY_PHYAD_MASK 0x1F
-#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x))
-
/* Relative to REG_RGMII_CNTRL */
#define RGMII_MODE_EN (1 << 0)
#define ID_MODE_DIS (1 << 1)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 457/677] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s)
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (455 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 456/677] net: dsa: bcm_sf2: add function finding RGMII register Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 458/677] selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed Greg Kroah-Hartman
` (226 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rafał Miłecki,
Florian Fainelli, David S. Miller, Sasha Levin
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit 6859d91549341c2ad769d482de58129f080c0f04 ]
BCM4908 has only 1 RGMII reg for controlling port 7.
Fixes: 73b7a6047971 ("net: dsa: bcm_sf2: support BCM4908's integrated switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/bcm_sf2.c | 11 +++++++----
drivers/net/dsa/bcm_sf2_regs.h | 1 +
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index cd64b7f471b5..9c86cacc4a72 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -36,7 +36,12 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
{
switch (priv->type) {
case BCM4908_DEVICE_ID:
- /* TODO */
+ switch (port) {
+ case 7:
+ return REG_RGMII_11_CNTRL;
+ default:
+ break;
+ }
break;
default:
switch (port) {
@@ -1179,9 +1184,7 @@ static const u16 bcm_sf2_4908_reg_offsets[] = {
[REG_PHY_REVISION] = 0x14,
[REG_SPHY_CNTRL] = 0x24,
[REG_CROSSBAR] = 0xc8,
- [REG_RGMII_0_CNTRL] = 0xe0,
- [REG_RGMII_1_CNTRL] = 0xec,
- [REG_RGMII_2_CNTRL] = 0xf8,
+ [REG_RGMII_11_CNTRL] = 0x014c,
[REG_LED_0_CNTRL] = 0x40,
[REG_LED_1_CNTRL] = 0x4c,
[REG_LED_2_CNTRL] = 0x58,
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index c7783cb45845..9e141d1a0b07 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -21,6 +21,7 @@ enum bcm_sf2_reg_offs {
REG_RGMII_0_CNTRL,
REG_RGMII_1_CNTRL,
REG_RGMII_2_CNTRL,
+ REG_RGMII_11_CNTRL,
REG_LED_0_CNTRL,
REG_LED_1_CNTRL,
REG_LED_2_CNTRL,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 458/677] selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (456 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 457/677] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s) Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 459/677] libbpf: Add explicit padding to btf_dump_emit_type_decl_opts Greg Kroah-Hartman
` (225 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, Alexei Starovoitov,
Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit cab62c37be057379a2a17b1b2eacd9dcba1e14dc ]
Trigger vmlinux.h and BPF skeletons re-generation if detected that bpftool was
re-compiled. Otherwise full `make clean` is required to get updated skeletons,
if bpftool is modified.
Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-11-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 044bfdcf5b74..76a325862119 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -221,7 +221,7 @@ $(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers
endif
-$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) | $(BPFTOOL) $(INCLUDE_DIR)
+$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR)
ifeq ($(VMLINUX_H),)
$(call msg,GEN,,$@)
$(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@
@@ -346,7 +346,8 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o: \
$(TRUNNER_BPF_SKELS): $(TRUNNER_OUTPUT)/%.skel.h: \
$(TRUNNER_OUTPUT)/%.o \
- | $(BPFTOOL) $(TRUNNER_OUTPUT)
+ $(BPFTOOL) \
+ | $(TRUNNER_OUTPUT)
$$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@)
$(Q)$$(BPFTOOL) gen skeleton $$< > $$@
endif
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 459/677] libbpf: Add explicit padding to btf_dump_emit_type_decl_opts
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (457 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 458/677] selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 460/677] powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used Greg Kroah-Hartman
` (224 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, KP Singh, Sasha Levin
From: KP Singh <kpsingh@kernel.org>
[ Upstream commit ea24b19562fe5f72c78319dbb347b701818956d9 ]
Similar to
https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org/
When DECLARE_LIBBPF_OPTS is used with inline field initialization, e.g:
DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts,
.field_name = var_ident,
.indent_level = 2,
.strip_mods = strip_mods,
);
and compiled in debug mode, the compiler generates code which
leaves the padding uninitialized and triggers errors within libbpf APIs
which require strict zero initialization of OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes: 9f81654eebe8 ("libbpf: Expose BTF-to-C type declaration emitting API")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319192117.2310658-1-kpsingh@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/btf.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h
index 1237bcd1dd17..5b8a6ea44b38 100644
--- a/tools/lib/bpf/btf.h
+++ b/tools/lib/bpf/btf.h
@@ -173,6 +173,7 @@ struct btf_dump_emit_type_decl_opts {
int indent_level;
/* strip all the const/volatile/restrict mods */
bool strip_mods;
+ size_t :0;
};
#define btf_dump_emit_type_decl_opts__last_field strip_mods
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 460/677] powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (458 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 459/677] libbpf: Add explicit padding to btf_dump_emit_type_decl_opts Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 461/677] powerpc/fadump: Mark fadump_calculate_reserve_size as __init Greg Kroah-Hartman
` (223 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastian Andrzej Siewior,
Michael Ellerman, Sasha Levin
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 9be77e11dade414d2fa63750aa5c754fac49d619 ]
The mutex linear_mapping_mutex is defined at the of the file while its
only two user are within the CONFIG_MEMORY_HOTPLUG block.
A compile without CONFIG_MEMORY_HOTPLUG set fails on PREEMPT_RT because
its mutex implementation is smart enough to realize that it is unused.
Move the definition of linear_mapping_mutex to ifdef block where it is
used.
Fixes: 1f73ad3e8d755 ("powerpc/mm: print warning in arch_remove_linear_mapping()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210219165648.2505482-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/mm/mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 4e8ce6d85232..7a59a5c9aa5d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -54,7 +54,6 @@
#include <mm/mmu_decl.h>
-static DEFINE_MUTEX(linear_mapping_mutex);
unsigned long long memory_limit;
bool init_mem_is_free;
@@ -72,6 +71,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
EXPORT_SYMBOL(phys_mem_access_prot);
#ifdef CONFIG_MEMORY_HOTPLUG
+static DEFINE_MUTEX(linear_mapping_mutex);
#ifdef CONFIG_NUMA
int memory_add_physaddr_to_nid(u64 start)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 461/677] powerpc/fadump: Mark fadump_calculate_reserve_size as __init
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (459 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 460/677] powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 462/677] powerpc/prom: Mark identical_pvr_fixup " Greg Kroah-Hartman
` (222 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, Michael Ellerman,
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit fbced1546eaaab57a32e56c974ea8acf10c6abd8 ]
If fadump_calculate_reserve_size() is not inlined, there is a modpost
warning:
WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in
reference from the function fadump_calculate_reserve_size() to the
function .init.text:parse_crashkernel()
The function fadump_calculate_reserve_size() references
the function __init parse_crashkernel().
This is often because fadump_calculate_reserve_size lacks a __init
annotation or the annotation of parse_crashkernel is wrong.
fadump_calculate_reserve_size() calls parse_crashkernel(), which is
marked as __init and fadump_calculate_reserve_size() is called from
within fadump_reserve_mem(), which is also marked as __init.
Mark fadump_calculate_reserve_size() as __init to fix the section
mismatch. Additionally, remove the inline keyword as it is not necessary
to inline this function; the compiler is still free to do so if it feels
it is worthwhile since commit 889b3c1245de ("compiler: remove
CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 11550dc0a00b ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1300
Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/fadump.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 8482739d42f3..eddf362caedc 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -292,7 +292,7 @@ static void fadump_show_config(void)
* that is required for a kernel to boot successfully.
*
*/
-static inline u64 fadump_calculate_reserve_size(void)
+static __init u64 fadump_calculate_reserve_size(void)
{
u64 base, size, bootmem_min;
int ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 462/677] powerpc/prom: Mark identical_pvr_fixup as __init
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (460 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 461/677] powerpc/fadump: Mark fadump_calculate_reserve_size as __init Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 463/677] MIPS: fix local_irq_{disable,enable} in asmmacro.h Greg Kroah-Hartman
` (221 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, Michael Ellerman,
Sasha Levin
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/prom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9a4797d1d40d..a8b2d6bfc1ca 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -267,7 +267,7 @@ static struct feature_property {
};
#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
-static inline void identical_pvr_fixup(unsigned long node)
+static __init void identical_pvr_fixup(unsigned long node)
{
unsigned int pvr;
const char *model = of_get_flat_dt_prop(node, "model", NULL);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 463/677] MIPS: fix local_irq_{disable,enable} in asmmacro.h
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (461 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 462/677] powerpc/prom: Mark identical_pvr_fixup " Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 464/677] ima: Fix the error code for restoring the PCR value Greg Kroah-Hartman
` (220 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huang Pei, Thomas Bogendoerfer, Sasha Levin
From: Huang Pei <huangpei@loongson.cn>
[ Upstream commit 05c4e2721d7af0df7bc1378a23712a0fd16947b5 ]
commit ba9196d2e005 ("MIPS: Make DIEI support as a config option")
use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly,
without this patch, "local_irq_disable" from entry.S in 3A1000
(with buggy di/ei) lose protection of commit e97c5b609880 ("MIPS:
Make irqflags.h functions preempt-safe for non-mipsr2 cpus")
Fixes: ba9196d2e005 ("MIPS: Make DIEI support as a config option")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/include/asm/asmmacro.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 86f2323ebe6b..ca83ada7015f 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -44,8 +44,7 @@
.endm
#endif
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
- defined(CONFIG_CPU_MIPSR6)
+#ifdef CONFIG_CPU_HAS_DIEI
.macro local_irq_enable reg=t0
ei
irq_enable_hazard
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 464/677] ima: Fix the error code for restoring the PCR value
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (462 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 463/677] MIPS: fix local_irq_{disable,enable} in asmmacro.h Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 465/677] inet: use bigger hash table for IP ID generation Greg Kroah-Hartman
` (219 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Li Huafei, Roberto Sassu, Mimi Zohar,
Sasha Levin
From: Li Huafei <lihuafei1@huawei.com>
[ Upstream commit 7990ccafaa37dc6d8bb095d4d7cd997e8903fd10 ]
In ima_restore_measurement_list(), hdr[HDR_PCR].data is pointing to a
buffer of type u8, which contains the dumped 32-bit pcr value.
Currently, only the least significant byte is used to restore the pcr
value. We should convert hdr[HDR_PCR].data to a pointer of type u32
before fetching the value to restore the correct pcr value.
Fixes: 47fdee60b47f ("ima: use ima_parse_buf() to parse measurements headers")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/ima/ima_template.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c
index e22e510ae92d..4e081e650047 100644
--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -494,8 +494,8 @@ int ima_restore_measurement_list(loff_t size, void *buf)
}
}
- entry->pcr = !ima_canonical_fmt ? *(hdr[HDR_PCR].data) :
- le32_to_cpu(*(hdr[HDR_PCR].data));
+ entry->pcr = !ima_canonical_fmt ? *(u32 *)(hdr[HDR_PCR].data) :
+ le32_to_cpu(*(u32 *)(hdr[HDR_PCR].data));
ret = ima_restore_measurement_entry(entry);
if (ret < 0)
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 465/677] inet: use bigger hash table for IP ID generation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (463 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 464/677] ima: Fix the error code for restoring the PCR value Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 466/677] pinctrl: pinctrl-single: remove unused parameter Greg Kroah-Hartman
` (218 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Amit Klein, Eric Dumazet,
Willy Tarreau, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit aa6dd211e4b1dde9d5dc25d699d35f789ae7eeba ]
In commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/route.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index bba150fdd265..d635b4f32d34 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -66,6 +66,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/memblock.h>
#include <linux/string.h>
#include <linux/socket.h>
#include <linux/sockios.h>
@@ -478,8 +479,10 @@ static void ipv4_confirm_neigh(const struct dst_entry *dst, const void *daddr)
__ipv4_confirm_neigh(dev, *(__force u32 *)pkey);
}
-#define IP_IDENTS_SZ 2048u
-
+/* Hash tables of size 2048..262144 depending on RAM size.
+ * Each bucket uses 8 bytes.
+ */
+static u32 ip_idents_mask __read_mostly;
static atomic_t *ip_idents __read_mostly;
static u32 *ip_tstamps __read_mostly;
@@ -489,12 +492,16 @@ static u32 *ip_tstamps __read_mostly;
*/
u32 ip_idents_reserve(u32 hash, int segs)
{
- u32 *p_tstamp = ip_tstamps + hash % IP_IDENTS_SZ;
- atomic_t *p_id = ip_idents + hash % IP_IDENTS_SZ;
- u32 old = READ_ONCE(*p_tstamp);
- u32 now = (u32)jiffies;
+ u32 bucket, old, now = (u32)jiffies;
+ atomic_t *p_id;
+ u32 *p_tstamp;
u32 delta = 0;
+ bucket = hash & ip_idents_mask;
+ p_tstamp = ip_tstamps + bucket;
+ p_id = ip_idents + bucket;
+ old = READ_ONCE(*p_tstamp);
+
if (old != now && cmpxchg(p_tstamp, old, now) == old)
delta = prandom_u32_max(now - old);
@@ -3553,18 +3560,25 @@ struct ip_rt_acct __percpu *ip_rt_acct __read_mostly;
int __init ip_rt_init(void)
{
+ void *idents_hash;
int cpu;
- ip_idents = kmalloc_array(IP_IDENTS_SZ, sizeof(*ip_idents),
- GFP_KERNEL);
- if (!ip_idents)
- panic("IP: failed to allocate ip_idents\n");
+ /* For modern hosts, this will use 2 MB of memory */
+ idents_hash = alloc_large_system_hash("IP idents",
+ sizeof(*ip_idents) + sizeof(*ip_tstamps),
+ 0,
+ 16, /* one bucket per 64 KB */
+ HASH_ZERO,
+ NULL,
+ &ip_idents_mask,
+ 2048,
+ 256*1024);
+
+ ip_idents = idents_hash;
- prandom_bytes(ip_idents, IP_IDENTS_SZ * sizeof(*ip_idents));
+ prandom_bytes(ip_idents, (ip_idents_mask + 1) * sizeof(*ip_idents));
- ip_tstamps = kcalloc(IP_IDENTS_SZ, sizeof(*ip_tstamps), GFP_KERNEL);
- if (!ip_tstamps)
- panic("IP: failed to allocate ip_tstamps\n");
+ ip_tstamps = idents_hash + (ip_idents_mask + 1) * sizeof(*ip_idents);
for_each_possible_cpu(cpu) {
struct uncached_list *ul = &per_cpu(rt_uncached_list, cpu);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 466/677] pinctrl: pinctrl-single: remove unused parameter
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (464 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 465/677] inet: use bigger hash table for IP ID generation Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 467/677] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero Greg Kroah-Hartman
` (217 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hanna Hawa, Tony Lindgren,
Drew Fustini, Linus Walleij, Sasha Levin
From: Hanna Hawa <hhhawa@amazon.com>
[ Upstream commit 8fa2ea202b13b6da81e26c399ff1d87488398453 ]
Remove unused parameter 'pin_pos' from pcs_add_pin().
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-3-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-single.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 7771316dfffa..8a7922459896 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -656,10 +656,8 @@ static const struct pinconf_ops pcs_pinconf_ops = {
* pcs_add_pin() - add a pin to the static per controller pin array
* @pcs: pcs driver instance
* @offset: register offset from base
- * @pin_pos: unused
*/
-static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
- unsigned pin_pos)
+static int pcs_add_pin(struct pcs_device *pcs, unsigned int offset)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
struct pinctrl_pin_desc *pin;
@@ -729,16 +727,14 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
unsigned offset;
int res;
int byte_num;
- int pin_pos = 0;
if (pcs->bits_per_mux) {
byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
offset = (byte_num / mux_bytes) * mux_bytes;
- pin_pos = i % num_pins_in_register;
} else {
offset = i * mux_bytes;
}
- res = pcs_add_pin(pcs, offset, pin_pos);
+ res = pcs_add_pin(pcs, offset);
if (res < 0) {
dev_err(pcs->dev, "error adding pins: %i\n", res);
return res;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 467/677] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (465 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 466/677] pinctrl: pinctrl-single: remove unused parameter Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 468/677] MIPS: loongson64: fix bug when PAGE_SIZE > 16KB Greg Kroah-Hartman
` (216 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hanna Hawa, Andy Shevchenko,
Tony Lindgren, Drew Fustini, Linus Walleij, Sasha Levin
From: Hanna Hawa <hhhawa@amazon.com>
[ Upstream commit bd85125ea88513f637a62a72e8949c579c5c0a87 ]
A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.
Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-single.c | 55 ++++++++++++++++++++------------
1 file changed, 35 insertions(+), 20 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 8a7922459896..10890fde9a75 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -270,20 +270,44 @@ static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
writel(val, reg);
}
+static unsigned int pcs_pin_reg_offset_get(struct pcs_device *pcs,
+ unsigned int pin)
+{
+ unsigned int mux_bytes = pcs->width / BITS_PER_BYTE;
+
+ if (pcs->bits_per_mux) {
+ unsigned int pin_offset_bytes;
+
+ pin_offset_bytes = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
+ return (pin_offset_bytes / mux_bytes) * mux_bytes;
+ }
+
+ return pin * mux_bytes;
+}
+
+static unsigned int pcs_pin_shift_reg_get(struct pcs_device *pcs,
+ unsigned int pin)
+{
+ return (pin % (pcs->width / pcs->bits_per_pin)) * pcs->bits_per_pin;
+}
+
static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned pin)
{
struct pcs_device *pcs;
- unsigned val, mux_bytes;
+ unsigned int val;
unsigned long offset;
size_t pa;
pcs = pinctrl_dev_get_drvdata(pctldev);
- mux_bytes = pcs->width / BITS_PER_BYTE;
- offset = pin * mux_bytes;
+ offset = pcs_pin_reg_offset_get(pcs, pin);
val = pcs->read(pcs->base + offset);
+
+ if (pcs->bits_per_mux)
+ val &= pcs->fmask << pcs_pin_shift_reg_get(pcs, pin);
+
pa = pcs->res->start + offset;
seq_printf(s, "%zx %08x %s ", pa, val, DRIVER_NAME);
@@ -384,7 +408,6 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_gpiofunc_range *frange = NULL;
struct list_head *pos, *tmp;
- int mux_bytes = 0;
unsigned data;
/* If function mask is null, return directly. */
@@ -392,29 +415,27 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
return -ENOTSUPP;
list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
+ u32 offset;
+
frange = list_entry(pos, struct pcs_gpiofunc_range, node);
if (pin >= frange->offset + frange->npins
|| pin < frange->offset)
continue;
- mux_bytes = pcs->width / BITS_PER_BYTE;
- if (pcs->bits_per_mux) {
- int byte_num, offset, pin_shift;
+ offset = pcs_pin_reg_offset_get(pcs, pin);
- byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
- offset = (byte_num / mux_bytes) * mux_bytes;
- pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
- pcs->bits_per_pin;
+ if (pcs->bits_per_mux) {
+ int pin_shift = pcs_pin_shift_reg_get(pcs, pin);
data = pcs->read(pcs->base + offset);
data &= ~(pcs->fmask << pin_shift);
data |= frange->gpiofunc << pin_shift;
pcs->write(data, pcs->base + offset);
} else {
- data = pcs->read(pcs->base + pin * mux_bytes);
+ data = pcs->read(pcs->base + offset);
data &= ~pcs->fmask;
data |= frange->gpiofunc;
- pcs->write(data, pcs->base + pin * mux_bytes);
+ pcs->write(data, pcs->base + offset);
}
break;
}
@@ -726,14 +747,8 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
for (i = 0; i < pcs->desc.npins; i++) {
unsigned offset;
int res;
- int byte_num;
- if (pcs->bits_per_mux) {
- byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
- offset = (byte_num / mux_bytes) * mux_bytes;
- } else {
- offset = i * mux_bytes;
- }
+ offset = pcs_pin_reg_offset_get(pcs, i);
res = pcs_add_pin(pcs, offset);
if (res < 0) {
dev_err(pcs->dev, "error adding pins: %i\n", res);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 468/677] MIPS: loongson64: fix bug when PAGE_SIZE > 16KB
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (466 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 467/677] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 469/677] ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk Greg Kroah-Hartman
` (215 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Huang Pei, Jiaxun Yang,
Thomas Bogendoerfer, Sasha Levin
From: Huang Pei <huangpei@loongson.cn>
[ Upstream commit 509d36a941a3466b78d4377913623d210b162458 ]
When page size larger than 16KB, arguments "vaddr + size(16KB)" in
"ioremap_page_range(vaddr, vaddr + size,...)" called by
"add_legacy_isa_io" is not page-aligned.
As loongson64 needs at least page size 16KB to get rid of cache alias,
and "vaddr" is 64KB-aligned, and 64KB is largest page size supported,
rounding "size" up to PAGE_SIZE is enough for all page size supported.
Fixes: 6d0068ad15e4 ("MIPS: Loongson64: Process ISA Node in DeviceTree")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/loongson64/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index cfa788bca871..1c664b23c0f9 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -126,7 +126,7 @@ static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_
return -ENOMEM;
range->fwnode = fwnode;
- range->size = size;
+ range->size = size = round_up(size, PAGE_SIZE);
range->hw_start = hw_start;
range->flags = LOGIC_PIO_CPU_MMIO;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 469/677] ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (467 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 468/677] MIPS: loongson64: fix bug when PAGE_SIZE > 16KB Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 470/677] iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK Greg Kroah-Hartman
` (214 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shengjiu Wang, Daniel Baluta,
Charles Keepax, Mark Brown, Sasha Levin
From: Shengjiu Wang <shengjiu.wang@nxp.com>
[ Upstream commit 99067c07e8d877035f6249d194a317c78b7d052d ]
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes: 3c01b9ee2ab9 ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/wm8960.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index cda9cd935d4f..9e621a254392 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -608,10 +608,6 @@ static const int bclk_divs[] = {
* - lrclk = sysclk / dac_divs
* - 10 * bclk = sysclk / bclk_divs
*
- * If we cannot find an exact match for (sysclk, lrclk, bclk)
- * triplet, we relax the bclk such that bclk is chosen as the
- * closest available frequency greater than expected bclk.
- *
* @wm8960: codec private data
* @mclk: MCLK used to derive sysclk
* @sysclk_idx: sysclk_divs index for found sysclk
@@ -629,7 +625,7 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
{
int sysclk, bclk, lrclk;
int i, j, k;
- int diff, closest = mclk;
+ int diff;
/* marker for no match */
*bclk_idx = -1;
@@ -653,12 +649,6 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
*bclk_idx = k;
break;
}
- if (diff > 0 && closest > diff) {
- *sysclk_idx = i;
- *dac_idx = j;
- *bclk_idx = k;
- closest = diff;
- }
}
if (k != ARRAY_SIZE(bclk_divs))
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 470/677] iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (468 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 469/677] ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 471/677] RDMA/mlx5: Fix drop packet rule in egress table Greg Kroah-Hartman
` (213 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rui Zhu, Zhen Lei, Will Deacon, Sasha Levin
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 655c447c97d7fe462e6cd9e15809037be028bc70 ]
In arm_smmu_gerror_handler(), the value of the SMMU_GERROR register is
filtered by GERROR_ERR_MASK. However, the GERROR_ERR_MASK does not contain
the SFM bit. As a result, the subsequent error processing is not performed
when only the SFM error occurs.
Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Rui Zhu <zhurui3@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210324081603.1074-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index f985817c967a..230b6f6b3901 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -115,7 +115,7 @@
#define GERROR_PRIQ_ABT_ERR (1 << 3)
#define GERROR_EVTQ_ABT_ERR (1 << 2)
#define GERROR_CMDQ_ERR (1 << 0)
-#define GERROR_ERR_MASK 0xfd
+#define GERROR_ERR_MASK 0x1fd
#define ARM_SMMU_GERRORN 0x64
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 471/677] RDMA/mlx5: Fix drop packet rule in egress table
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (469 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 470/677] iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 472/677] IB/isert: Fix a use after free in isert_connect_request Greg Kroah-Hartman
` (212 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Bloch, Maor Gottlieb,
Leon Romanovsky, Jason Gunthorpe, Sasha Levin
From: Maor Gottlieb <maorg@nvidia.com>
[ Upstream commit c73700806d4e430d182c2be069d230076818a99a ]
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee782 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/fs.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/fs.c b/drivers/infiniband/hw/mlx5/fs.c
index 25da0b05b4e2..f0af3f1ae039 100644
--- a/drivers/infiniband/hw/mlx5/fs.c
+++ b/drivers/infiniband/hw/mlx5/fs.c
@@ -1528,8 +1528,8 @@ static struct mlx5_ib_flow_handler *raw_fs_rule_add(
dst_num++;
}
- handler = _create_raw_flow_rule(dev, ft_prio, dst, fs_matcher,
- flow_context, flow_act,
+ handler = _create_raw_flow_rule(dev, ft_prio, dst_num ? dst : NULL,
+ fs_matcher, flow_context, flow_act,
cmd_in, inlen, dst_num);
if (IS_ERR(handler)) {
@@ -1885,8 +1885,9 @@ static int get_dests(struct uverbs_attr_bundle *attrs,
else
*dest_id = mqp->raw_packet_qp.rq.tirn;
*dest_type = MLX5_FLOW_DESTINATION_TYPE_TIR;
- } else if (fs_matcher->ns_type == MLX5_FLOW_NAMESPACE_EGRESS ||
- fs_matcher->ns_type == MLX5_FLOW_NAMESPACE_RDMA_TX) {
+ } else if ((fs_matcher->ns_type == MLX5_FLOW_NAMESPACE_EGRESS ||
+ fs_matcher->ns_type == MLX5_FLOW_NAMESPACE_RDMA_TX) &&
+ !(*flags & MLX5_IB_ATTR_CREATE_FLOW_FLAGS_DROP)) {
*dest_type = MLX5_FLOW_DESTINATION_TYPE_PORT;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 472/677] IB/isert: Fix a use after free in isert_connect_request
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (470 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 471/677] RDMA/mlx5: Fix drop packet rule in egress table Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 473/677] powerpc/64s: Fix hash fault to use TRAP accessor Greg Kroah-Hartman
` (211 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Sagi Grimberg,
Leon Romanovsky, Max Gurtovoy, Jason Gunthorpe, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit adb76a520d068a54ee5ca82e756cf8e5a47363a4 ]
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes: ae9ea9ed38c9 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/isert/ib_isert.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 7305ed8976c2..18266f07c58d 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -438,23 +438,23 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
isert_init_conn(isert_conn);
isert_conn->cm_id = cma_id;
- ret = isert_alloc_login_buf(isert_conn, cma_id->device);
- if (ret)
- goto out;
-
device = isert_device_get(cma_id);
if (IS_ERR(device)) {
ret = PTR_ERR(device);
- goto out_rsp_dma_map;
+ goto out;
}
isert_conn->device = device;
+ ret = isert_alloc_login_buf(isert_conn, cma_id->device);
+ if (ret)
+ goto out_conn_dev;
+
isert_set_nego_params(isert_conn, &event->param.conn);
isert_conn->qp = isert_create_qp(isert_conn, cma_id);
if (IS_ERR(isert_conn->qp)) {
ret = PTR_ERR(isert_conn->qp);
- goto out_conn_dev;
+ goto out_rsp_dma_map;
}
ret = isert_login_post_recv(isert_conn);
@@ -473,10 +473,10 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
out_destroy_qp:
isert_destroy_qp(isert_conn);
-out_conn_dev:
- isert_device_put(device);
out_rsp_dma_map:
isert_free_login_buf(isert_conn);
+out_conn_dev:
+ isert_device_put(device);
out:
kfree(isert_conn);
rdma_reject(cma_id, NULL, 0, IB_CM_REJ_CONSUMER_DEFINED);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 473/677] powerpc/64s: Fix hash fault to use TRAP accessor
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (471 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 472/677] IB/isert: Fix a use after free in isert_connect_request Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 474/677] powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration Greg Kroah-Hartman
` (210 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Nicholas Piggin,
Michael Ellerman, Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 1479e3d3b7559133b0a107772b5841e9c2cad450 ]
Hash faults use the trap vector to decide whether this is an
instruction or data fault. This should use the TRAP accessor
rather than open access regs->trap.
This won't cause a problem at the moment because 64s only uses
trap flags for system call interrupts (the norestart flag), but
that could change if any other trap flags get used in future.
Fixes: a4922f5442e7e ("powerpc/64s: move the hash fault handling logic to C")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316105205.407767-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/mm/book3s64/hash_utils.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 581b20a2feaf..7719995323c3 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1545,10 +1545,10 @@ DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
if (user_mode(regs) || (region_id == USER_REGION_ID))
access &= ~_PAGE_PRIVILEGED;
- if (regs->trap == 0x400)
+ if (TRAP(regs) == 0x400)
access |= _PAGE_EXEC;
- err = hash_page_mm(mm, ea, access, regs->trap, flags);
+ err = hash_page_mm(mm, ea, access, TRAP(regs), flags);
if (unlikely(err < 0)) {
// failed to instert a hash PTE due to an hypervisor error
if (user_mode(regs)) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 474/677] powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (472 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 473/677] powerpc/64s: Fix hash fault to use TRAP accessor Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 475/677] MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again Greg Kroah-Hartman
` (209 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Chen Huang,
Michael Ellerman, Sasha Levin
From: Chen Huang <chenhuang5@huawei.com>
[ Upstream commit 4fe529449d85e78972fa327999961ecc83a0b6db ]
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes: 2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 386ae12d8523..57c0ab71d51e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -224,7 +224,7 @@ config PPC
select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
- select HAVE_HARDLOCKUP_DETECTOR_ARCH if (PPC64 && PPC_BOOK3S)
+ select HAVE_HARDLOCKUP_DETECTOR_ARCH if PPC64 && PPC_BOOK3S && SMP
select HAVE_OPTPROBES if PPC64
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 475/677] MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (473 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 474/677] powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 476/677] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP Greg Kroah-Hartman
` (208 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tiezhu Yang, Thomas Bogendoerfer,
Sasha Levin
From: Tiezhu Yang <yangtiezhu@loongson.cn>
[ Upstream commit 66633abd0642f1e89d26e15f36fb13d3a1c535ff ]
After commit 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work"), bpf_probe_read{, str}() functions were no longer
available on MIPS, so there exist some errors when running bpf program:
root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py
bpf: Failed to load program: Invalid argument
[...]
11: (85) call bpf_probe_read#4
unknown func bpf_probe_read#4
[...]
Exception: Failed to load BPF program count_sched: Invalid argument
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs
with non-overlapping address ranges, but they can overlap in EVA mode
on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in
arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will
not be available.
This is similar with the commit d195b1d1d119 ("powerpc/bpf: Enable
bpf_probe_read{, str}() on powerpc again").
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..e89d63cd92d1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,6 +6,7 @@ config MIPS
select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_KCOV
+ select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA
select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UBSAN_SANITIZE_ALL
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 476/677] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (474 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 475/677] MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 477/677] fs: dlm: fix missing unlock on error in accept_from_sock() Greg Kroah-Hartman
` (207 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Walle,
Álvaro Fernández Rojas, Linus Walleij,
Bartosz Golaszewski, Sasha Levin
From: Álvaro Fernández Rojas <noltari@gmail.com>
[ Upstream commit 9c7d24693d864f90b27aad5d15fbfe226c02898b ]
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
isn't enabled.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/gpio/driver.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 286de0520574..ecf0032a0995 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -624,8 +624,17 @@ void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
unsigned int offset);
+#ifdef CONFIG_GPIOLIB_IRQCHIP
int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
struct irq_domain *domain);
+#else
+static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
+ struct irq_domain *domain)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
+#endif
int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset);
void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 477/677] fs: dlm: fix missing unlock on error in accept_from_sock()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (475 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 476/677] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 478/677] ASoC: q6afe-clocks: fix reprobing of the driver Greg Kroah-Hartman
` (206 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
David Teigland, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit 2fd8db2dd05d895961c7c7b9fa02d72f385560e4 ]
Add the missing unlock before return from accept_from_sock()
in the error handling case.
Fixes: 6cde210a9758 ("fs: dlm: add helper for init connection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/dlm/lowcomms.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 372c34ff8594..f7d2c52791f8 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -908,6 +908,7 @@ static int accept_from_sock(struct listen_connection *con)
result = dlm_con_init(othercon, nodeid);
if (result < 0) {
kfree(othercon);
+ mutex_unlock(&newcon->sock_mutex);
goto accept_err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 478/677] ASoC: q6afe-clocks: fix reprobing of the driver
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (476 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 477/677] fs: dlm: fix missing unlock on error in accept_from_sock() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 479/677] ALSA: core: remove redundant spin_lock pair in snd_card_disconnect Greg Kroah-Hartman
` (205 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Baryshkov,
Srinivas Kandagatla, Stephen Boyd, Mark Brown, Sasha Levin
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 96fadf7e8ff49fdb74754801228942b67c3eeebd ]
Q6afe-clocks driver can get reprobed. For example if the APR services
are restarted after the firmware crash. However currently Q6afe-clocks
driver will oops because hw.init will get cleared during first _probe
call. Rewrite the driver to fill the clock data at runtime rather than
using big static array of clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Fixes: 520a1c396d19 ("ASoC: q6afe-clocks: add q6afe clock controller")
Link: https://lore.kernel.org/r/20210327092857.3073879-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/qdsp6/q6afe-clocks.c | 209 ++++++++++++++--------------
sound/soc/qcom/qdsp6/q6afe.c | 2 +-
sound/soc/qcom/qdsp6/q6afe.h | 2 +-
3 files changed, 108 insertions(+), 105 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-clocks.c b/sound/soc/qcom/qdsp6/q6afe-clocks.c
index f0362f061652..9431656283cd 100644
--- a/sound/soc/qcom/qdsp6/q6afe-clocks.c
+++ b/sound/soc/qcom/qdsp6/q6afe-clocks.c
@@ -11,33 +11,29 @@
#include <linux/slab.h>
#include "q6afe.h"
-#define Q6AFE_CLK(id) &(struct q6afe_clk) { \
+#define Q6AFE_CLK(id) { \
.clk_id = id, \
.afe_clk_id = Q6AFE_##id, \
.name = #id, \
- .attributes = LPASS_CLK_ATTRIBUTE_COUPLE_NO, \
.rate = 19200000, \
- .hw.init = &(struct clk_init_data) { \
- .ops = &clk_q6afe_ops, \
- .name = #id, \
- }, \
}
-#define Q6AFE_VOTE_CLK(id, blkid, n) &(struct q6afe_clk) { \
+#define Q6AFE_VOTE_CLK(id, blkid, n) { \
.clk_id = id, \
.afe_clk_id = blkid, \
- .name = #n, \
- .hw.init = &(struct clk_init_data) { \
- .ops = &clk_vote_q6afe_ops, \
- .name = #id, \
- }, \
+ .name = n, \
}
-struct q6afe_clk {
- struct device *dev;
+struct q6afe_clk_init {
int clk_id;
int afe_clk_id;
char *name;
+ int rate;
+};
+
+struct q6afe_clk {
+ struct device *dev;
+ int afe_clk_id;
int attributes;
int rate;
uint32_t handle;
@@ -48,8 +44,7 @@ struct q6afe_clk {
struct q6afe_cc {
struct device *dev;
- struct q6afe_clk **clks;
- int num_clks;
+ struct q6afe_clk *clks[Q6AFE_MAX_CLK_ID];
};
static int clk_q6afe_prepare(struct clk_hw *hw)
@@ -105,7 +100,7 @@ static int clk_vote_q6afe_block(struct clk_hw *hw)
struct q6afe_clk *clk = to_q6afe_clk(hw);
return q6afe_vote_lpass_core_hw(clk->dev, clk->afe_clk_id,
- clk->name, &clk->handle);
+ clk_hw_get_name(&clk->hw), &clk->handle);
}
static void clk_unvote_q6afe_block(struct clk_hw *hw)
@@ -120,84 +115,76 @@ static const struct clk_ops clk_vote_q6afe_ops = {
.unprepare = clk_unvote_q6afe_block,
};
-static struct q6afe_clk *q6afe_clks[Q6AFE_MAX_CLK_ID] = {
- [LPASS_CLK_ID_PRI_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_MI2S_IBIT),
- [LPASS_CLK_ID_PRI_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_MI2S_EBIT),
- [LPASS_CLK_ID_SEC_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_MI2S_IBIT),
- [LPASS_CLK_ID_SEC_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_MI2S_EBIT),
- [LPASS_CLK_ID_TER_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_MI2S_IBIT),
- [LPASS_CLK_ID_TER_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_MI2S_EBIT),
- [LPASS_CLK_ID_QUAD_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_MI2S_IBIT),
- [LPASS_CLK_ID_QUAD_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_MI2S_EBIT),
- [LPASS_CLK_ID_SPEAKER_I2S_IBIT] =
- Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_IBIT),
- [LPASS_CLK_ID_SPEAKER_I2S_EBIT] =
- Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_EBIT),
- [LPASS_CLK_ID_SPEAKER_I2S_OSR] =
- Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_OSR),
- [LPASS_CLK_ID_QUI_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_IBIT),
- [LPASS_CLK_ID_QUI_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_EBIT),
- [LPASS_CLK_ID_SEN_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEN_MI2S_IBIT),
- [LPASS_CLK_ID_SEN_MI2S_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEN_MI2S_EBIT),
- [LPASS_CLK_ID_INT0_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT0_MI2S_IBIT),
- [LPASS_CLK_ID_INT1_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT1_MI2S_IBIT),
- [LPASS_CLK_ID_INT2_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT2_MI2S_IBIT),
- [LPASS_CLK_ID_INT3_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT3_MI2S_IBIT),
- [LPASS_CLK_ID_INT4_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT4_MI2S_IBIT),
- [LPASS_CLK_ID_INT5_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT5_MI2S_IBIT),
- [LPASS_CLK_ID_INT6_MI2S_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_INT6_MI2S_IBIT),
- [LPASS_CLK_ID_QUI_MI2S_OSR] = Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_OSR),
- [LPASS_CLK_ID_PRI_PCM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_PCM_IBIT),
- [LPASS_CLK_ID_PRI_PCM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_PCM_EBIT),
- [LPASS_CLK_ID_SEC_PCM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_PCM_IBIT),
- [LPASS_CLK_ID_SEC_PCM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_PCM_EBIT),
- [LPASS_CLK_ID_TER_PCM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_PCM_IBIT),
- [LPASS_CLK_ID_TER_PCM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_PCM_EBIT),
- [LPASS_CLK_ID_QUAD_PCM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_PCM_IBIT),
- [LPASS_CLK_ID_QUAD_PCM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_PCM_EBIT),
- [LPASS_CLK_ID_QUIN_PCM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUIN_PCM_IBIT),
- [LPASS_CLK_ID_QUIN_PCM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUIN_PCM_EBIT),
- [LPASS_CLK_ID_QUI_PCM_OSR] = Q6AFE_CLK(LPASS_CLK_ID_QUI_PCM_OSR),
- [LPASS_CLK_ID_PRI_TDM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_TDM_IBIT),
- [LPASS_CLK_ID_PRI_TDM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_PRI_TDM_EBIT),
- [LPASS_CLK_ID_SEC_TDM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_TDM_IBIT),
- [LPASS_CLK_ID_SEC_TDM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_SEC_TDM_EBIT),
- [LPASS_CLK_ID_TER_TDM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_TDM_IBIT),
- [LPASS_CLK_ID_TER_TDM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_TER_TDM_EBIT),
- [LPASS_CLK_ID_QUAD_TDM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_TDM_IBIT),
- [LPASS_CLK_ID_QUAD_TDM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUAD_TDM_EBIT),
- [LPASS_CLK_ID_QUIN_TDM_IBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_IBIT),
- [LPASS_CLK_ID_QUIN_TDM_EBIT] = Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_EBIT),
- [LPASS_CLK_ID_QUIN_TDM_OSR] = Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_OSR),
- [LPASS_CLK_ID_MCLK_1] = Q6AFE_CLK(LPASS_CLK_ID_MCLK_1),
- [LPASS_CLK_ID_MCLK_2] = Q6AFE_CLK(LPASS_CLK_ID_MCLK_2),
- [LPASS_CLK_ID_MCLK_3] = Q6AFE_CLK(LPASS_CLK_ID_MCLK_3),
- [LPASS_CLK_ID_MCLK_4] = Q6AFE_CLK(LPASS_CLK_ID_MCLK_4),
- [LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE] =
- Q6AFE_CLK(LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE),
- [LPASS_CLK_ID_INT_MCLK_0] = Q6AFE_CLK(LPASS_CLK_ID_INT_MCLK_0),
- [LPASS_CLK_ID_INT_MCLK_1] = Q6AFE_CLK(LPASS_CLK_ID_INT_MCLK_1),
- [LPASS_CLK_ID_WSA_CORE_MCLK] = Q6AFE_CLK(LPASS_CLK_ID_WSA_CORE_MCLK),
- [LPASS_CLK_ID_WSA_CORE_NPL_MCLK] =
- Q6AFE_CLK(LPASS_CLK_ID_WSA_CORE_NPL_MCLK),
- [LPASS_CLK_ID_VA_CORE_MCLK] = Q6AFE_CLK(LPASS_CLK_ID_VA_CORE_MCLK),
- [LPASS_CLK_ID_TX_CORE_MCLK] = Q6AFE_CLK(LPASS_CLK_ID_TX_CORE_MCLK),
- [LPASS_CLK_ID_TX_CORE_NPL_MCLK] =
- Q6AFE_CLK(LPASS_CLK_ID_TX_CORE_NPL_MCLK),
- [LPASS_CLK_ID_RX_CORE_MCLK] = Q6AFE_CLK(LPASS_CLK_ID_RX_CORE_MCLK),
- [LPASS_CLK_ID_RX_CORE_NPL_MCLK] =
- Q6AFE_CLK(LPASS_CLK_ID_RX_CORE_NPL_MCLK),
- [LPASS_CLK_ID_VA_CORE_2X_MCLK] =
- Q6AFE_CLK(LPASS_CLK_ID_VA_CORE_2X_MCLK),
- [LPASS_HW_AVTIMER_VOTE] = Q6AFE_VOTE_CLK(LPASS_HW_AVTIMER_VOTE,
- Q6AFE_LPASS_CORE_AVTIMER_BLOCK,
- "LPASS_AVTIMER_MACRO"),
- [LPASS_HW_MACRO_VOTE] = Q6AFE_VOTE_CLK(LPASS_HW_MACRO_VOTE,
- Q6AFE_LPASS_CORE_HW_MACRO_BLOCK,
- "LPASS_HW_MACRO"),
- [LPASS_HW_DCODEC_VOTE] = Q6AFE_VOTE_CLK(LPASS_HW_DCODEC_VOTE,
- Q6AFE_LPASS_CORE_HW_DCODEC_BLOCK,
- "LPASS_HW_DCODEC"),
+static const struct q6afe_clk_init q6afe_clks[] = {
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SPEAKER_I2S_OSR),
+ Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEN_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEN_MI2S_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT0_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT1_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT2_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT3_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT4_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT5_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_INT6_MI2S_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUI_MI2S_OSR),
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_PCM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_PCM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_PCM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_PCM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_PCM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_PCM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_PCM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_PCM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUIN_PCM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUIN_PCM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUI_PCM_OSR),
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_TDM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_PRI_TDM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_TDM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_SEC_TDM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_TDM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_TER_TDM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_TDM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUAD_TDM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_IBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_EBIT),
+ Q6AFE_CLK(LPASS_CLK_ID_QUIN_TDM_OSR),
+ Q6AFE_CLK(LPASS_CLK_ID_MCLK_1),
+ Q6AFE_CLK(LPASS_CLK_ID_MCLK_2),
+ Q6AFE_CLK(LPASS_CLK_ID_MCLK_3),
+ Q6AFE_CLK(LPASS_CLK_ID_MCLK_4),
+ Q6AFE_CLK(LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE),
+ Q6AFE_CLK(LPASS_CLK_ID_INT_MCLK_0),
+ Q6AFE_CLK(LPASS_CLK_ID_INT_MCLK_1),
+ Q6AFE_CLK(LPASS_CLK_ID_WSA_CORE_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_WSA_CORE_NPL_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_VA_CORE_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_TX_CORE_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_TX_CORE_NPL_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_RX_CORE_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_RX_CORE_NPL_MCLK),
+ Q6AFE_CLK(LPASS_CLK_ID_VA_CORE_2X_MCLK),
+ Q6AFE_VOTE_CLK(LPASS_HW_AVTIMER_VOTE,
+ Q6AFE_LPASS_CORE_AVTIMER_BLOCK,
+ "LPASS_AVTIMER_MACRO"),
+ Q6AFE_VOTE_CLK(LPASS_HW_MACRO_VOTE,
+ Q6AFE_LPASS_CORE_HW_MACRO_BLOCK,
+ "LPASS_HW_MACRO"),
+ Q6AFE_VOTE_CLK(LPASS_HW_DCODEC_VOTE,
+ Q6AFE_LPASS_CORE_HW_DCODEC_BLOCK,
+ "LPASS_HW_DCODEC"),
};
static struct clk_hw *q6afe_of_clk_hw_get(struct of_phandle_args *clkspec,
@@ -207,7 +194,7 @@ static struct clk_hw *q6afe_of_clk_hw_get(struct of_phandle_args *clkspec,
unsigned int idx = clkspec->args[0];
unsigned int attr = clkspec->args[1];
- if (idx >= cc->num_clks || attr > LPASS_CLK_ATTRIBUTE_COUPLE_DIVISOR) {
+ if (idx >= Q6AFE_MAX_CLK_ID || attr > LPASS_CLK_ATTRIBUTE_COUPLE_DIVISOR) {
dev_err(cc->dev, "Invalid clk specifier (%d, %d)\n", idx, attr);
return ERR_PTR(-EINVAL);
}
@@ -230,20 +217,36 @@ static int q6afe_clock_dev_probe(struct platform_device *pdev)
if (!cc)
return -ENOMEM;
- cc->clks = &q6afe_clks[0];
- cc->num_clks = ARRAY_SIZE(q6afe_clks);
+ cc->dev = dev;
for (i = 0; i < ARRAY_SIZE(q6afe_clks); i++) {
- if (!q6afe_clks[i])
- continue;
+ unsigned int id = q6afe_clks[i].clk_id;
+ struct clk_init_data init = {
+ .name = q6afe_clks[i].name,
+ };
+ struct q6afe_clk *clk;
+
+ clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return -ENOMEM;
+
+ clk->dev = dev;
+ clk->afe_clk_id = q6afe_clks[i].afe_clk_id;
+ clk->rate = q6afe_clks[i].rate;
+ clk->hw.init = &init;
+
+ if (clk->rate)
+ init.ops = &clk_q6afe_ops;
+ else
+ init.ops = &clk_vote_q6afe_ops;
- q6afe_clks[i]->dev = dev;
+ cc->clks[id] = clk;
- ret = devm_clk_hw_register(dev, &q6afe_clks[i]->hw);
+ ret = devm_clk_hw_register(dev, &clk->hw);
if (ret)
return ret;
}
- ret = of_clk_add_hw_provider(dev->of_node, q6afe_of_clk_hw_get, cc);
+ ret = devm_of_clk_add_hw_provider(dev, q6afe_of_clk_hw_get, cc);
if (ret)
return ret;
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index cad1cd1bfdf0..4327b72162ec 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -1681,7 +1681,7 @@ int q6afe_unvote_lpass_core_hw(struct device *dev, uint32_t hw_block_id,
EXPORT_SYMBOL(q6afe_unvote_lpass_core_hw);
int q6afe_vote_lpass_core_hw(struct device *dev, uint32_t hw_block_id,
- char *client_name, uint32_t *client_handle)
+ const char *client_name, uint32_t *client_handle)
{
struct q6afe *afe = dev_get_drvdata(dev->parent);
struct afe_cmd_remote_lpass_core_hw_vote_request *vote_cfg;
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
index 22e10269aa10..3845b56c0ed3 100644
--- a/sound/soc/qcom/qdsp6/q6afe.h
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -236,7 +236,7 @@ int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id,
int q6afe_set_lpass_clock(struct device *dev, int clk_id, int clk_src,
int clk_root, unsigned int freq);
int q6afe_vote_lpass_core_hw(struct device *dev, uint32_t hw_block_id,
- char *client_name, uint32_t *client_handle);
+ const char *client_name, uint32_t *client_handle);
int q6afe_unvote_lpass_core_hw(struct device *dev, uint32_t hw_block_id,
uint32_t client_handle);
#endif /* __Q6AFE_H__ */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 479/677] ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (477 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 478/677] ASoC: q6afe-clocks: fix reprobing of the driver Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 480/677] net: phy: lan87xx: fix access to wrong register of LAN87xx Greg Kroah-Hartman
` (204 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jia Zhou, Yi Wang, Takashi Iwai, Sasha Levin
From: Jia Zhou <zhou.jia2@zte.com.cn>
[ Upstream commit abc21649b3e5c34b143bf86f0c78e33d5815e250 ]
modification in commit 2a3f7221acdd ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes: 2a3f7221acdd ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/core/init.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/core/init.c b/sound/core/init.c
index 45f4b01de23f..ef41f5b3a240 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -398,10 +398,8 @@ int snd_card_disconnect(struct snd_card *card)
return 0;
}
card->shutdown = 1;
- spin_unlock(&card->files_lock);
/* replace file->f_op with special dummy operations */
- spin_lock(&card->files_lock);
list_for_each_entry(mfile, &card->files_list, list) {
/* it's critical part, use endless loop */
/* we have no room to fail */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 480/677] net: phy: lan87xx: fix access to wrong register of LAN87xx
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (478 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 479/677] ALSA: core: remove redundant spin_lock pair in snd_card_disconnect Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 481/677] udp: skip L4 aggregation for UDP tunnel packets Greg Kroah-Hartman
` (203 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Måns Rullgård, Andre Edich,
David S. Miller, Sasha Levin
From: Andre Edich <andre.edich@microchip.com>
[ Upstream commit fdb5cc6ab3b6a1c0122d3644a63ef9dc7a610d35 ]
The function lan87xx_config_aneg_ext was introduced to configure
LAN95xxA but as well writes to undocumented register of LAN87xx.
This fix prevents that access.
The function lan87xx_config_aneg_ext gets more suitable for the new
behavior name.
Reported-by: Måns Rullgård <mans@mansr.com>
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/smsc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index ddb78fb4d6dc..d8cac02a79b9 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -185,10 +185,13 @@ static int lan87xx_config_aneg(struct phy_device *phydev)
return genphy_config_aneg(phydev);
}
-static int lan87xx_config_aneg_ext(struct phy_device *phydev)
+static int lan95xx_config_aneg_ext(struct phy_device *phydev)
{
int rc;
+ if (phydev->phy_id != 0x0007c0f0) /* not (LAN9500A or LAN9505A) */
+ return lan87xx_config_aneg(phydev);
+
/* Extend Manual AutoMDIX timer */
rc = phy_read(phydev, PHY_EDPD_CONFIG);
if (rc < 0)
@@ -441,7 +444,7 @@ static struct phy_driver smsc_phy_driver[] = {
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
- .config_aneg = lan87xx_config_aneg_ext,
+ .config_aneg = lan95xx_config_aneg_ext,
/* IRQ related */
.config_intr = smsc_phy_config_intr,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 481/677] udp: skip L4 aggregation for UDP tunnel packets
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (479 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 480/677] net: phy: lan87xx: fix access to wrong register of LAN87xx Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 482/677] udp: never accept GSO_FRAGLIST packets Greg Kroah-Hartman
` (202 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Willem de Bruijn, Paolo Abeni,
David S. Miller, Sasha Levin
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit 18f25dc399901426dff61e676ba603ff52c666f7 ]
If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there
are UDP tunnels available in the system, udp_gro_receive() could end-up
doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at
the outer UDP tunnel level for packets effectively carrying and UDP
tunnel header.
That could cause inner protocol corruption. If e.g. the relevant
packets carry a vxlan header, different vxlan ids will be ignored/
aggregated to the same GSO packet. Inner headers will be ignored, too,
so that e.g. TCP over vxlan push packets will be held in the GRO
engine till the next flush, etc.
Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the
current packet could land in a UDP tunnel, and let udp_gro_receive()
do GRO via udp_sk(sk)->gro_receive.
The check implemented in this patch is broader than what is strictly
needed, as the existing UDP tunnel could be e.g. configured on top of
a different device: we could end-up skipping GRO at-all for some packets.
Anyhow, that is a very thin corner case and covering it will add quite
a bit of complexity.
v1 -> v2:
- hopefully clarify the commit message
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/udp_offload.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index c5b4b586570f..25134a3548e9 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -515,21 +515,24 @@ struct sk_buff *udp_gro_receive(struct list_head *head, struct sk_buff *skb,
unsigned int off = skb_gro_offset(skb);
int flush = 1;
+ /* we can do L4 aggregation only if the packet can't land in a tunnel
+ * otherwise we could corrupt the inner stream
+ */
NAPI_GRO_CB(skb)->is_flist = 0;
- if (skb->dev->features & NETIF_F_GRO_FRAGLIST)
- NAPI_GRO_CB(skb)->is_flist = sk ? !udp_sk(sk)->gro_enabled: 1;
+ if (!sk || !udp_sk(sk)->gro_receive) {
+ if (skb->dev->features & NETIF_F_GRO_FRAGLIST)
+ NAPI_GRO_CB(skb)->is_flist = sk ? !udp_sk(sk)->gro_enabled : 1;
- if ((!sk && (skb->dev->features & NETIF_F_GRO_UDP_FWD)) ||
- (sk && udp_sk(sk)->gro_enabled) || NAPI_GRO_CB(skb)->is_flist) {
- pp = call_gro_receive(udp_gro_receive_segment, head, skb);
+ if ((!sk && (skb->dev->features & NETIF_F_GRO_UDP_FWD)) ||
+ (sk && udp_sk(sk)->gro_enabled) || NAPI_GRO_CB(skb)->is_flist)
+ pp = call_gro_receive(udp_gro_receive_segment, head, skb);
return pp;
}
- if (!sk || NAPI_GRO_CB(skb)->encap_mark ||
+ if (NAPI_GRO_CB(skb)->encap_mark ||
(uh->check && skb->ip_summed != CHECKSUM_PARTIAL &&
NAPI_GRO_CB(skb)->csum_cnt == 0 &&
- !NAPI_GRO_CB(skb)->csum_valid) ||
- !udp_sk(sk)->gro_receive)
+ !NAPI_GRO_CB(skb)->csum_valid))
goto out;
/* mark that this skb passed once through the tunnel gro layer */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 482/677] udp: never accept GSO_FRAGLIST packets
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (480 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 481/677] udp: skip L4 aggregation for UDP tunnel packets Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 483/677] powerpc/pseries: Only register vio drivers if vio bus exists Greg Kroah-Hartman
` (201 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Willem de Bruijn,
David S. Miller, Sasha Levin
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit 78352f73dc5047f3f744764cc45912498c52f3c9 ]
Currently the UDP protocol delivers GSO_FRAGLIST packets to
the sockets without the expected segmentation.
This change addresses the issue introducing and maintaining
a couple of new fields to explicitly accept SKB_GSO_UDP_L4
or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso()
accordingly.
UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist
zeroed.
v1 -> v2:
- use 2 bits instead of a whole GSO bitmask (Willem)
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/udp.h | 16 +++++++++++++---
net/ipv4/udp.c | 3 +++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/include/linux/udp.h b/include/linux/udp.h
index aa84597bdc33..ae58ff3b6b5b 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -51,7 +51,9 @@ struct udp_sock {
* different encapsulation layer set
* this
*/
- gro_enabled:1; /* Can accept GRO packets */
+ gro_enabled:1, /* Request GRO aggregation */
+ accept_udp_l4:1,
+ accept_udp_fraglist:1;
/*
* Following member retains the information to create a UDP header
* when the socket is uncorked.
@@ -131,8 +133,16 @@ static inline void udp_cmsg_recv(struct msghdr *msg, struct sock *sk,
static inline bool udp_unexpected_gso(struct sock *sk, struct sk_buff *skb)
{
- return !udp_sk(sk)->gro_enabled && skb_is_gso(skb) &&
- skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4;
+ if (!skb_is_gso(skb))
+ return false;
+
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4 && !udp_sk(sk)->accept_udp_l4)
+ return true;
+
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST && !udp_sk(sk)->accept_udp_fraglist)
+ return true;
+
+ return false;
}
#define udp_portaddr_for_each_entry(__sk, list) \
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 99d743eb9dc4..c586a6bb8c6d 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2664,9 +2664,12 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
case UDP_GRO:
lock_sock(sk);
+
+ /* when enabling GRO, accept the related GSO packet type */
if (valbool)
udp_tunnel_encap_enable(sk->sk_socket);
up->gro_enabled = valbool;
+ up->accept_udp_l4 = valbool;
release_sock(sk);
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 483/677] powerpc/pseries: Only register vio drivers if vio bus exists
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (481 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 482/677] udp: never accept GSO_FRAGLIST packets Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 484/677] net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start() Greg Kroah-Hartman
` (200 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Menzel, Michael Ellerman,
Tyrel Datwyler, Sasha Levin
From: Michael Ellerman <mpe@ellerman.id.au>
[ Upstream commit 11d92156f7a862091009d7655d19c1e7de37fc7a ]
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b9337824 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b9337824 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/vio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 9cb4fc839fd5..429053d0402a 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1285,6 +1285,10 @@ static int vio_bus_remove(struct device *dev)
int __vio_register_driver(struct vio_driver *viodrv, struct module *owner,
const char *mod_name)
{
+ // vio_bus_type is only initialised for pseries
+ if (!machine_is(pseries))
+ return -ENODEV;
+
pr_debug("%s: driver %s registering\n", __func__, viodrv->name);
/* fill in 'struct driver' fields */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 484/677] net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (482 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 483/677] powerpc/pseries: Only register vio drivers if vio bus exists Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 485/677] bug: Remove redundant condition check in report_bug Greg Kroah-Hartman
` (199 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
David S. Miller, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit ac1db7acea67777be1ba86e36e058c479eab6508 ]
Add the missing destroy_workqueue() before return from
tipc_crypto_start() in the error handling case.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tipc/crypto.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/tipc/crypto.c b/net/tipc/crypto.c
index 97710ce36047..c89ce47c56cf 100644
--- a/net/tipc/crypto.c
+++ b/net/tipc/crypto.c
@@ -1492,6 +1492,8 @@ int tipc_crypto_start(struct tipc_crypto **crypto, struct net *net,
/* Allocate statistic structure */
c->stats = alloc_percpu_gfp(struct tipc_crypto_stats, GFP_ATOMIC);
if (!c->stats) {
+ if (c->wq)
+ destroy_workqueue(c->wq);
kfree_sensitive(c);
return -ENOMEM;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 485/677] bug: Remove redundant condition check in report_bug
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (483 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 484/677] net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 486/677] RDMA/core: Fix corrupted SL on passive side Greg Kroah-Hartman
` (198 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrew Scull, Peter Zijlstra,
Steven Rostedt (VMware),
Will Deacon, Marc Zyngier, Sasha Levin
From: Andrew Scull <ascull@google.com>
[ Upstream commit 3ad1a6cb0abc63d036fc866bd7c2c5983516dec5 ]
report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true so remove it.
Fixes: 1b4cfe3c0a30d ("lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()")
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-2-ascull@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/bug.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/lib/bug.c b/lib/bug.c
index 8f9d537bfb2a..b92da1f6e21b 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -155,30 +155,27 @@ enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs)
file = NULL;
line = 0;
- warning = 0;
- if (bug) {
#ifdef CONFIG_DEBUG_BUGVERBOSE
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
- file = bug->file;
+ file = bug->file;
#else
- file = (const char *)bug + bug->file_disp;
+ file = (const char *)bug + bug->file_disp;
#endif
- line = bug->line;
+ line = bug->line;
#endif
- warning = (bug->flags & BUGFLAG_WARNING) != 0;
- once = (bug->flags & BUGFLAG_ONCE) != 0;
- done = (bug->flags & BUGFLAG_DONE) != 0;
-
- if (warning && once) {
- if (done)
- return BUG_TRAP_TYPE_WARN;
-
- /*
- * Since this is the only store, concurrency is not an issue.
- */
- bug->flags |= BUGFLAG_DONE;
- }
+ warning = (bug->flags & BUGFLAG_WARNING) != 0;
+ once = (bug->flags & BUGFLAG_ONCE) != 0;
+ done = (bug->flags & BUGFLAG_DONE) != 0;
+
+ if (warning && once) {
+ if (done)
+ return BUG_TRAP_TYPE_WARN;
+
+ /*
+ * Since this is the only store, concurrency is not an issue.
+ */
+ bug->flags |= BUGFLAG_DONE;
}
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 486/677] RDMA/core: Fix corrupted SL on passive side
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (484 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 485/677] bug: Remove redundant condition check in report_bug Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 487/677] nfc: pn533: prevent potential memory corruption Greg Kroah-Hartman
` (197 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Håkon Bugge, Jason Gunthorpe,
Sasha Levin
From: Håkon Bugge <haakon.bugge@oracle.com>
[ Upstream commit 194f64a3cad3ab9e381e996a13089de3215d1887 ]
On RoCE systems, a CM REQ contains a Primary Hop Limit > 1 and Primary
Subnet Local is zero.
In cm_req_handler(), the cm_process_routed_req() function is called. Since
the Primary Subnet Local value is zero in the request, and since this is
RoCE (Primary Local LID is permissive), the following statement will be
executed:
IBA_SET(CM_REQ_PRIMARY_SL, req_msg, wc->sl);
This corrupts SL in req_msg if it was different from zero. In other words,
a request to setup a connection using an SL != zero, will not be honored,
and a connection using SL zero will be created instead.
Fixed by not calling cm_process_routed_req() on RoCE systems, the
cm_process_route_req() is only for IB anyhow.
Fixes: 3971c9f6dbf2 ("IB/cm: Add interim support for routed paths")
Link: https://lore.kernel.org/r/1616420132-31005-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/cm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 3d194bb60840..6adbaea358ae 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -2138,7 +2138,8 @@ static int cm_req_handler(struct cm_work *work)
goto destroy;
}
- cm_process_routed_req(req_msg, work->mad_recv_wc->wc);
+ if (cm_id_priv->av.ah_attr.type != RDMA_AH_ATTR_TYPE_ROCE)
+ cm_process_routed_req(req_msg, work->mad_recv_wc->wc);
memset(&work->path[0], 0, sizeof(work->path[0]));
if (cm_req_has_alt_path(req_msg))
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 487/677] nfc: pn533: prevent potential memory corruption
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (485 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 486/677] RDMA/core: Fix corrupted SL on passive side Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 488/677] net: hns3: Limiting the scope of vector_ring_chain variable Greg Kroah-Hartman
` (196 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit ca4d4c34ae9aa5c3c0da76662c5e549d2fc0cc86 ]
If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
Fixes: c3b1e1e8a76f ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nfc/pn533/pn533.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index f1469ac8ff42..3fe5b81eda2d 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -706,6 +706,9 @@ static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a,
if (PN533_TYPE_A_SEL_CASCADE(type_a->sel_res) != 0)
return false;
+ if (type_a->nfcid_len > NFC_NFCID1_MAXSIZE)
+ return false;
+
return true;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 488/677] net: hns3: Limiting the scope of vector_ring_chain variable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (486 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 487/677] nfc: pn533: prevent potential memory corruption Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 489/677] mips: bmips: fix syscon-reboot nodes Greg Kroah-Hartman
` (195 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Salil Mehta, David S. Miller, Sasha Levin
From: Salil Mehta <salil.mehta@huawei.com>
[ Upstream commit d392ecd1bc29ae15b0e284d5f732c2d36f244271 ]
Limiting the scope of the variable vector_ring_chain to the block where it
is used.
Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index bf4302a5cf95..65752f363f43 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3704,7 +3704,6 @@ static void hns3_nic_set_cpumask(struct hns3_nic_priv *priv)
static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
{
- struct hnae3_ring_chain_node vector_ring_chain;
struct hnae3_handle *h = priv->ae_handle;
struct hns3_enet_tqp_vector *tqp_vector;
int ret;
@@ -3736,6 +3735,8 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
}
for (i = 0; i < priv->vector_num; i++) {
+ struct hnae3_ring_chain_node vector_ring_chain;
+
tqp_vector = &priv->tqp_vector[i];
tqp_vector->rx_group.total_bytes = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 489/677] mips: bmips: fix syscon-reboot nodes
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (487 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 488/677] net: hns3: Limiting the scope of vector_ring_chain variable Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 490/677] KVM: arm64: Fix error return code in init_hyp_mode() Greg Kroah-Hartman
` (194 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Álvaro Fernández Rojas,
Florian Fainelli, Thomas Bogendoerfer, Sasha Levin
From: Álvaro Fernández Rojas <noltari@gmail.com>
[ Upstream commit cde58b861a1d365568588adda59d42351c0c4ad3 ]
Commit a23c4134955e added the clock controller nodes, incorrectly changing the
syscon-reboot nodes addresses.
Fixes: a23c4134955e ("MIPS: BMIPS: add clock controller nodes")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/boot/dts/brcm/bcm3368.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm63268.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6358.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6362.dtsi | 2 +-
arch/mips/boot/dts/brcm/bcm6368.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..d4b2b430dad0 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -59,7 +59,7 @@
periph_cntl: syscon@fff8c008 {
compatible = "syscon";
- reg = <0xfff8c000 0x4>;
+ reg = <0xfff8c008 0x4>;
native-endian;
};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index e0021ff9f144..940594436872 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -59,7 +59,7 @@
periph_cntl: syscon@10000008 {
compatible = "syscon";
- reg = <0x10000000 0xc>;
+ reg = <0x10000008 0x4>;
native-endian;
};
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
index 9d93e7f5e6fc..d79c88c2fc9c 100644
--- a/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -59,7 +59,7 @@
periph_cntl: syscon@fffe0008 {
compatible = "syscon";
- reg = <0xfffe0000 0x4>;
+ reg = <0xfffe0008 0x4>;
native-endian;
};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index eb10341b75ba..8a21cb761ffd 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -59,7 +59,7 @@
periph_cntl: syscon@10000008 {
compatible = "syscon";
- reg = <0x10000000 0xc>;
+ reg = <0x10000008 0x4>;
native-endian;
};
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 52c19f40b9cc..8e87867ebc04 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -59,7 +59,7 @@
periph_cntl: syscon@100000008 {
compatible = "syscon";
- reg = <0x10000000 0xc>;
+ reg = <0x10000008 0x4>;
native-endian;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 490/677] KVM: arm64: Fix error return code in init_hyp_mode()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (488 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 489/677] mips: bmips: fix syscon-reboot nodes Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 491/677] iommu/vt-d: Dont set then clear private data in prq_event_thread() Greg Kroah-Hartman
` (193 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Wensheng,
Marc Zyngier, Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 52b9e265d22bccc5843e167da76ab119874e2883 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: eeeee7193df0 ("KVM: arm64: Bootstrap PSCI SMC handler in nVHE EL2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210406121759.5407-1-wangwensheng4@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/kvm/arm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 7f06ba76698d..85261015ce5d 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1808,8 +1808,10 @@ static int init_hyp_mode(void)
if (is_protected_kvm_enabled()) {
init_cpu_logical_map();
- if (!init_psci_relay())
+ if (!init_psci_relay()) {
+ err = -ENODEV;
goto out_err;
+ }
}
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 491/677] iommu/vt-d: Dont set then clear private data in prq_event_thread()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (489 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 490/677] KVM: arm64: Fix error return code in init_hyp_mode() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 492/677] iommu: Fix a boundary issue to avoid performance drop Greg Kroah-Hartman
` (192 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jacob Pan, Liu Yi L, Lu Baolu,
Joerg Roedel, Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit 1d421058c815d54113d9afdf6db3f995c788cf0d ]
The VT-d specification (section 7.6) requires that the value in the
Private Data field of a Page Group Response Descriptor must match
the value in the Private Data field of the respective Page Request
Descriptor.
The private data field of a page group response descriptor is set then
immediately cleared in prq_event_thread(). This breaks the rule defined
by the VT-d specification. Fix it by moving clearing code up.
Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320024156.640798-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/svm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 4627437ae1c0..547a6cf57057 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -1031,12 +1031,12 @@ no_pasid:
QI_PGRP_RESP_TYPE;
resp.qw1 = QI_PGRP_IDX(req->prg_index) |
QI_PGRP_LPIG(req->lpig);
+ resp.qw2 = 0;
+ resp.qw3 = 0;
if (req->priv_data_present)
memcpy(&resp.qw2, req->priv_data,
sizeof(req->priv_data));
- resp.qw2 = 0;
- resp.qw3 = 0;
qi_submit_sync(iommu, &resp, 1, 0);
}
prq_advance:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 492/677] iommu: Fix a boundary issue to avoid performance drop
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (490 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 491/677] iommu/vt-d: Dont set then clear private data in prq_event_thread() Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 493/677] iommu/vt-d: Report right snoop capability when using FL for IOVA Greg Kroah-Hartman
` (191 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiang Chen, Will Deacon,
Joerg Roedel, Sasha Levin
From: Xiang Chen <chenxiang66@hisilicon.com>
[ Upstream commit 3431c3f660a39f6ced954548a59dba6541ce3eb1 ]
After the change of patch ("iommu: Switch gather->end to the
inclusive end"), the performace drops from 1600+K IOPS to 1200K in our
kunpeng ARM64 platform.
We find that the range [start1, end1) actually is joint from the range
[end1, end2), but it is considered as disjoint after the change,
so it needs more times of TLB sync, and spends more time on it.
So fix the boundary issue to avoid performance drop.
Fixes: 862c3715de8f ("iommu: Switch gather->end to the inclusive end")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1616643504-120688-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/iommu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 5e7fe519430a..9ca6e6b8084d 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -547,7 +547,7 @@ static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
* structure can be rewritten.
*/
if (gather->pgsize != size ||
- end < gather->start || start > gather->end) {
+ end + 1 < gather->start || start > gather->end + 1) {
if (gather->pgsize)
iommu_iotlb_sync(domain, gather);
gather->pgsize = size;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 493/677] iommu/vt-d: Report right snoop capability when using FL for IOVA
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (491 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 492/677] iommu: Fix a boundary issue to avoid performance drop Greg Kroah-Hartman
@ 2021-05-12 14:48 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 494/677] iommu/vt-d: Report the right page fault address Greg Kroah-Hartman
` (190 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rajesh Sankaran, Kevin Tian,
Ashok Raj, Lu Baolu, Joerg Roedel, Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit 6c00612d0cba10f7d0917cf1f73c945003ed4cd7 ]
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/iommu.c | 12 +++++++++++-
drivers/iommu/intel/pasid.c | 16 ++++++++++++++++
drivers/iommu/intel/pasid.h | 1 +
3 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 66fab7944b39..b5d3301b2700 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -657,7 +657,14 @@ static int domain_update_iommu_snooping(struct intel_iommu *skip)
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (iommu != skip) {
- if (!ecap_sc_support(iommu->ecap)) {
+ /*
+ * If the hardware is operating in the scalable mode,
+ * the snooping control is always supported since we
+ * always set PASID-table-entry.PGSNP bit if the domain
+ * is managed outside (UNMANAGED).
+ */
+ if (!sm_supported(iommu) &&
+ !ecap_sc_support(iommu->ecap)) {
ret = 0;
break;
}
@@ -2528,6 +2535,9 @@ static int domain_setup_first_level(struct intel_iommu *iommu,
flags |= (level == 5) ? PASID_FLAG_FL5LP : 0;
+ if (domain->domain.type == IOMMU_DOMAIN_UNMANAGED)
+ flags |= PASID_FLAG_PAGE_SNOOP;
+
return intel_pasid_setup_first_level(iommu, dev, (pgd_t *)pgd, pasid,
domain->iommu_did[iommu->seq_id],
flags);
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index f26cb6195b2c..5093d317ff1a 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -411,6 +411,16 @@ static inline void pasid_set_page_snoop(struct pasid_entry *pe, bool value)
pasid_set_bits(&pe->val[1], 1 << 23, value << 23);
}
+/*
+ * Setup the Page Snoop (PGSNP) field (Bit 88) of a scalable mode
+ * PASID entry.
+ */
+static inline void
+pasid_set_pgsnp(struct pasid_entry *pe)
+{
+ pasid_set_bits(&pe->val[1], 1ULL << 24, 1ULL << 24);
+}
+
/*
* Setup the First Level Page table Pointer field (Bit 140~191)
* of a scalable mode PASID entry.
@@ -565,6 +575,9 @@ int intel_pasid_setup_first_level(struct intel_iommu *iommu,
}
}
+ if (flags & PASID_FLAG_PAGE_SNOOP)
+ pasid_set_pgsnp(pte);
+
pasid_set_domain_id(pte, did);
pasid_set_address_width(pte, iommu->agaw);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
@@ -643,6 +656,9 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu,
pasid_set_fault_enable(pte);
pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
+ if (domain->domain.type == IOMMU_DOMAIN_UNMANAGED)
+ pasid_set_pgsnp(pte);
+
/*
* Since it is a second level only translation setup, we should
* set SRE bit as well (addresses are expected to be GPAs).
diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
index 444c0bec221a..086ebd697319 100644
--- a/drivers/iommu/intel/pasid.h
+++ b/drivers/iommu/intel/pasid.h
@@ -48,6 +48,7 @@
*/
#define PASID_FLAG_SUPERVISOR_MODE BIT(0)
#define PASID_FLAG_NESTED BIT(1)
+#define PASID_FLAG_PAGE_SNOOP BIT(2)
/*
* The PASID_FLAG_FL5LP flag Indicates using 5-level paging for first-
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 494/677] iommu/vt-d: Report the right page fault address
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (492 preceding siblings ...)
2021-05-12 14:48 ` [PATCH 5.12 493/677] iommu/vt-d: Report right snoop capability when using FL for IOVA Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 495/677] iommu/vt-d: Remove WO permissions on second-level paging entries Greg Kroah-Hartman
` (189 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lu Baolu, Joerg Roedel, Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit 03d205094af45bca4f8e0498c461a893aa3ec6d9 ]
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
Fixes: eb8d93ea3c1d3 ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/svm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 547a6cf57057..ecb6314fdd5c 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -862,7 +862,7 @@ intel_svm_prq_report(struct device *dev, struct page_req_dsc *desc)
/* Fill in event data for device specific processing */
memset(&event, 0, sizeof(struct iommu_fault_event));
event.fault.type = IOMMU_FAULT_PAGE_REQ;
- event.fault.prm.addr = desc->addr;
+ event.fault.prm.addr = (u64)desc->addr << VTD_PAGE_SHIFT;
event.fault.prm.pasid = desc->pasid;
event.fault.prm.grpid = desc->prg_index;
event.fault.prm.perm = prq_to_iommu_prot(desc);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 495/677] iommu/vt-d: Remove WO permissions on second-level paging entries
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (493 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 494/677] iommu/vt-d: Report the right page fault address Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 496/677] iommu/vt-d: Invalidate PASID cache when root/context entry changed Greg Kroah-Hartman
` (188 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ashok Raj, Lu Baolu, Joerg Roedel,
Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit eea53c5816889ee8b64544fa2e9311a81184ff9c ]
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index b5d3301b2700..36d60536ae8d 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -2346,8 +2346,9 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
return -EINVAL;
attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
+ attr |= DMA_FL_PTE_PRESENT;
if (domain_use_first_level(domain)) {
- attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
+ attr |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
if (domain->domain.type == IOMMU_DOMAIN_DMA) {
attr |= DMA_FL_PTE_ACCESS;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 496/677] iommu/vt-d: Invalidate PASID cache when root/context entry changed
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (494 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 495/677] iommu/vt-d: Remove WO permissions on second-level paging entries Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 497/677] ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls Greg Kroah-Hartman
` (187 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ashok Raj, Lu Baolu, Joerg Roedel,
Sasha Levin
From: Lu Baolu <baolu.lu@linux.intel.com>
[ Upstream commit c0474a606ecb9326227b4d68059942f9db88a897 ]
When the Intel IOMMU is operating in the scalable mode, some information
from the root and context table may be used to tag entries in the PASID
cache. Software should invalidate the PASID-cache when changing root or
context table entries.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/iommu.c | 18 +++++++++---------
include/linux/intel-iommu.h | 1 +
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 36d60536ae8d..7e551da6c1fb 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1346,6 +1346,11 @@ static void iommu_set_root_entry(struct intel_iommu *iommu)
readl, (sts & DMA_GSTS_RTPS), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
+
+ iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
+ if (sm_supported(iommu))
+ qi_flush_pasid_cache(iommu, 0, QI_PC_GLOBAL, 0);
+ iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
void iommu_flush_write_buffer(struct intel_iommu *iommu)
@@ -2453,6 +2458,10 @@ static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
+
+ if (sm_supported(iommu))
+ qi_flush_pasid_cache(iommu, did_old, QI_PC_ALL_PASIDS, 0);
+
iommu->flush.flush_iotlb(iommu,
did_old,
0,
@@ -3301,8 +3310,6 @@ static int __init init_dmars(void)
register_pasid_allocator(iommu);
#endif
iommu_set_root_entry(iommu);
- iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
- iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
#ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
@@ -3492,12 +3499,7 @@ static int init_iommu_hw(void)
}
iommu_flush_write_buffer(iommu);
-
iommu_set_root_entry(iommu);
-
- iommu->flush.flush_context(iommu, 0, 0, 0,
- DMA_CCMD_GLOBAL_INVL);
- iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
}
@@ -3880,8 +3882,6 @@ static int intel_iommu_add(struct dmar_drhd_unit *dmaru)
goto disable_iommu;
iommu_set_root_entry(iommu);
- iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
- iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 1bc46b88711a..d1f32b33415a 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -372,6 +372,7 @@ enum {
/* PASID cache invalidation granu */
#define QI_PC_ALL_PASIDS 0
#define QI_PC_PASID_SEL 1
+#define QI_PC_GLOBAL 3
#define QI_EIOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
#define QI_EIOTLB_IH(ih) (((u64)ih) << 6)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 497/677] ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (495 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 496/677] iommu/vt-d: Invalidate PASID cache when root/context entry changed Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 498/677] HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness Greg Kroah-Hartman
` (186 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, coverity-bot, Takashi Iwai, Sasha Levin
From: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ]
There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/card.c | 14 +++++++-------
sound/usb/quirks.c | 16 ++++++++++++----
sound/usb/usbaudio.h | 2 ++
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 0826a437f8fc..7b7526d3a56e 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -181,9 +181,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
ctrlif, interface);
return -EINVAL;
}
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
-
- return 0;
+ return usb_driver_claim_interface(&usb_audio_driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
}
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
@@ -203,7 +202,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
if (! snd_usb_parse_audio_interface(chip, interface)) {
usb_set_interface(dev, interface, 0); /* reset the current interface */
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
+ return usb_driver_claim_interface(&usb_audio_driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
}
return 0;
@@ -862,7 +862,7 @@ static void usb_audio_disconnect(struct usb_interface *intf)
struct snd_card *card;
struct list_head *p;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return;
card = chip->card;
@@ -992,7 +992,7 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
struct usb_mixer_interface *mixer;
struct list_head *p;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return 0;
if (!chip->num_suspended_intf++) {
@@ -1022,7 +1022,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume)
struct list_head *p;
int err = 0;
- if (chip == (void *)-1L)
+ if (chip == USB_AUDIO_IFACE_UNUSED)
return 0;
atomic_inc(&chip->active); /* avoid autopm */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 176437a441e6..7c6e83eee71d 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -55,8 +55,12 @@ static int create_composite_quirk(struct snd_usb_audio *chip,
if (!iface)
continue;
if (quirk->ifnum != probed_ifnum &&
- !usb_interface_claimed(iface))
- usb_driver_claim_interface(driver, iface, (void *)-1L);
+ !usb_interface_claimed(iface)) {
+ err = usb_driver_claim_interface(driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
+ if (err < 0)
+ return err;
+ }
}
return 0;
@@ -426,8 +430,12 @@ static int create_autodetect_quirks(struct snd_usb_audio *chip,
continue;
err = create_autodetect_quirk(chip, iface, driver);
- if (err >= 0)
- usb_driver_claim_interface(driver, iface, (void *)-1L);
+ if (err >= 0) {
+ err = usb_driver_claim_interface(driver, iface,
+ USB_AUDIO_IFACE_UNUSED);
+ if (err < 0)
+ return err;
+ }
}
return 0;
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 60b9dd7df6bb..8794c8658ab9 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -61,6 +61,8 @@ struct snd_usb_audio {
struct media_intf_devnode *ctl_intf_media_devnode;
};
+#define USB_AUDIO_IFACE_UNUSED ((void *)-1L)
+
#define usb_audio_err(chip, fmt, args...) \
dev_err(&(chip)->dev->dev, fmt, ##args)
#define usb_audio_warn(chip, fmt, args...) \
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 498/677] HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (496 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 497/677] ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 499/677] HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling Greg Kroah-Hartman
` (185 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Pavel Machek,
Hans de Goede, Jiri Kosina, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit bbf62645255f120bc2e7488c237e3f04da42ec70 ]
The lenovo_led_brightness_set function may sleep, so we should have the
the led_class_dev's brightness_set_blocking callback point to it, rather
then the regular brightness_set callback.
When toggled through sysfs this is not a problem, but the brightness_set
callback may be called from atomic context when using LED-triggers.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-lenovo.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index c6c8e20f3e8d..4dc5e5f932ed 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -777,7 +777,7 @@ static enum led_brightness lenovo_led_brightness_get(
: LED_OFF;
}
-static void lenovo_led_brightness_set(struct led_classdev *led_cdev,
+static int lenovo_led_brightness_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct device *dev = led_cdev->dev->parent;
@@ -802,6 +802,8 @@ static void lenovo_led_brightness_set(struct led_classdev *led_cdev,
lenovo_led_set_tp10ubkbd(hdev, tp10ubkbd_led[led_nr], value);
break;
}
+
+ return 0;
}
static int lenovo_register_leds(struct hid_device *hdev)
@@ -822,7 +824,7 @@ static int lenovo_register_leds(struct hid_device *hdev)
data->led_mute.name = name_mute;
data->led_mute.brightness_get = lenovo_led_brightness_get;
- data->led_mute.brightness_set = lenovo_led_brightness_set;
+ data->led_mute.brightness_set_blocking = lenovo_led_brightness_set;
data->led_mute.dev = &hdev->dev;
ret = led_classdev_register(&hdev->dev, &data->led_mute);
if (ret < 0)
@@ -830,7 +832,7 @@ static int lenovo_register_leds(struct hid_device *hdev)
data->led_micmute.name = name_micm;
data->led_micmute.brightness_get = lenovo_led_brightness_get;
- data->led_micmute.brightness_set = lenovo_led_brightness_set;
+ data->led_micmute.brightness_set_blocking = lenovo_led_brightness_set;
data->led_micmute.dev = &hdev->dev;
ret = led_classdev_register(&hdev->dev, &data->led_micmute);
if (ret < 0) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 499/677] HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (497 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 498/677] HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 500/677] HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event() Greg Kroah-Hartman
` (184 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Hans de Goede,
Jiri Kosina, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 658d04e6eb6be1601ae95d7bee92bbf4096cdc1e ]
Fix the following issues with lenovo_led_set_tp10ubkbd() error handling:
1. On success hid_hw_raw_request() returns the number of bytes sent.
So we should check for (ret != 3) rather then for (ret != 0).
2. Actually propagate errors to the caller.
3. Since the LEDs are part of an USB keyboard-dock the mute LEDs can go
away at any time. Don't log an error when ret == -ENODEV and set the
LED_HW_PLUGGABLE flag to avoid errors getting logged when the USB gets
disconnected.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-lenovo.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index 4dc5e5f932ed..ee175ab54281 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -62,8 +62,8 @@ struct lenovo_drvdata {
#define TP10UBKBD_LED_OFF 1
#define TP10UBKBD_LED_ON 2
-static void lenovo_led_set_tp10ubkbd(struct hid_device *hdev, u8 led_code,
- enum led_brightness value)
+static int lenovo_led_set_tp10ubkbd(struct hid_device *hdev, u8 led_code,
+ enum led_brightness value)
{
struct lenovo_drvdata *data = hid_get_drvdata(hdev);
int ret;
@@ -75,10 +75,18 @@ static void lenovo_led_set_tp10ubkbd(struct hid_device *hdev, u8 led_code,
data->led_report[2] = value ? TP10UBKBD_LED_ON : TP10UBKBD_LED_OFF;
ret = hid_hw_raw_request(hdev, data->led_report[0], data->led_report, 3,
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
- if (ret)
- hid_err(hdev, "Set LED output report error: %d\n", ret);
+ if (ret != 3) {
+ if (ret != -ENODEV)
+ hid_err(hdev, "Set LED output report error: %d\n", ret);
+
+ ret = ret < 0 ? ret : -EIO;
+ } else {
+ ret = 0;
+ }
mutex_unlock(&data->led_report_mutex);
+
+ return ret;
}
static void lenovo_tp10ubkbd_sync_fn_lock(struct work_struct *work)
@@ -349,7 +357,7 @@ static ssize_t attr_fn_lock_store(struct device *dev,
{
struct hid_device *hdev = to_hid_device(dev);
struct lenovo_drvdata *data = hid_get_drvdata(hdev);
- int value;
+ int value, ret;
if (kstrtoint(buf, 10, &value))
return -EINVAL;
@@ -364,7 +372,9 @@ static ssize_t attr_fn_lock_store(struct device *dev,
lenovo_features_set_cptkbd(hdev);
break;
case USB_DEVICE_ID_LENOVO_TP10UBKBD:
- lenovo_led_set_tp10ubkbd(hdev, TP10UBKBD_FN_LOCK_LED, value);
+ ret = lenovo_led_set_tp10ubkbd(hdev, TP10UBKBD_FN_LOCK_LED, value);
+ if (ret)
+ return ret;
break;
}
@@ -785,6 +795,7 @@ static int lenovo_led_brightness_set(struct led_classdev *led_cdev,
struct lenovo_drvdata *data_pointer = hid_get_drvdata(hdev);
u8 tp10ubkbd_led[] = { TP10UBKBD_MUTE_LED, TP10UBKBD_MICMUTE_LED };
int led_nr = 0;
+ int ret = 0;
if (led_cdev == &data_pointer->led_micmute)
led_nr = 1;
@@ -799,11 +810,11 @@ static int lenovo_led_brightness_set(struct led_classdev *led_cdev,
lenovo_led_set_tpkbd(hdev);
break;
case USB_DEVICE_ID_LENOVO_TP10UBKBD:
- lenovo_led_set_tp10ubkbd(hdev, tp10ubkbd_led[led_nr], value);
+ ret = lenovo_led_set_tp10ubkbd(hdev, tp10ubkbd_led[led_nr], value);
break;
}
- return 0;
+ return ret;
}
static int lenovo_register_leds(struct hid_device *hdev)
@@ -825,6 +836,7 @@ static int lenovo_register_leds(struct hid_device *hdev)
data->led_mute.name = name_mute;
data->led_mute.brightness_get = lenovo_led_brightness_get;
data->led_mute.brightness_set_blocking = lenovo_led_brightness_set;
+ data->led_mute.flags = LED_HW_PLUGGABLE;
data->led_mute.dev = &hdev->dev;
ret = led_classdev_register(&hdev->dev, &data->led_mute);
if (ret < 0)
@@ -833,6 +845,7 @@ static int lenovo_register_leds(struct hid_device *hdev)
data->led_micmute.name = name_micm;
data->led_micmute.brightness_get = lenovo_led_brightness_get;
data->led_micmute.brightness_set_blocking = lenovo_led_brightness_set;
+ data->led_micmute.flags = LED_HW_PLUGGABLE;
data->led_micmute.dev = &hdev->dev;
ret = led_classdev_register(&hdev->dev, &data->led_micmute);
if (ret < 0) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 500/677] HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (498 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 499/677] HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 501/677] HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE Greg Kroah-Hartman
` (183 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Hans de Goede,
Jiri Kosina, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 34348a8661e3cd67dcf6938f08c8bb77522301f7 ]
The HID lenovo probe function only attaches drvdata to one of the
USB interfaces, but lenovo_event() will get called for all USB interfaces
to which hid-lenovo is bound.
This allows a malicious device to fake being a device handled by
hid-lenovo, which generates events for which lenovo_event() has
special handling (and thus dereferences hid_get_drvdata()) on another
interface triggering a NULL pointer exception.
Add a check for hid_get_drvdata() returning NULL, avoiding this
possible NULL pointer exception.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-lenovo.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index ee175ab54281..b2596ed37880 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -508,6 +508,9 @@ static int lenovo_event_cptkbd(struct hid_device *hdev,
static int lenovo_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
+ if (!hid_get_drvdata(hdev))
+ return 0;
+
switch (hdev->product) {
case USB_DEVICE_ID_LENOVO_CUSBKBD:
case USB_DEVICE_ID_LENOVO_CBTKBD:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 501/677] HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (499 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 500/677] HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 502/677] KVM: arm64: Initialize VCPU mdcr_el2 before loading it Greg Kroah-Hartman
` (182 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Behún, Hans de Goede,
Jiri Kosina, Sasha Levin
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit 617103246cfd19af837e4cb614ba9f877c4f7779 ]
Mapping the mic-mute button to KEY_MICMUTE is technically correct but
KEY_MICMUTE translates to a scancode of 256 (248 + 8) under X,
which does not fit in 8 bits, so it does not work.
Because of this userspace is expecting KEY_F20 instead,
theoretically KEY_MICMUTE should work under Wayland but even
there it does not work, because the desktop-environment is
listening only for KEY_F20 and not for KEY_MICMUTE.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/hid-lenovo.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index b2596ed37880..0ff03fed9770 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -33,6 +33,9 @@
#include "hid-ids.h"
+/* Userspace expects F20 for mic-mute KEY_MICMUTE does not work */
+#define LENOVO_KEY_MICMUTE KEY_F20
+
struct lenovo_drvdata {
u8 led_report[3]; /* Must be first for proper alignment */
int led_state;
@@ -134,7 +137,7 @@ static int lenovo_input_mapping_tpkbd(struct hid_device *hdev,
if (usage->hid == (HID_UP_BUTTON | 0x0010)) {
/* This sub-device contains trackpoint, mark it */
hid_set_drvdata(hdev, (void *)1);
- map_key_clear(KEY_MICMUTE);
+ map_key_clear(LENOVO_KEY_MICMUTE);
return 1;
}
return 0;
@@ -149,7 +152,7 @@ static int lenovo_input_mapping_cptkbd(struct hid_device *hdev,
(usage->hid & HID_USAGE_PAGE) == HID_UP_LNVENDOR) {
switch (usage->hid & HID_USAGE) {
case 0x00f1: /* Fn-F4: Mic mute */
- map_key_clear(KEY_MICMUTE);
+ map_key_clear(LENOVO_KEY_MICMUTE);
return 1;
case 0x00f2: /* Fn-F5: Brightness down */
map_key_clear(KEY_BRIGHTNESSDOWN);
@@ -239,7 +242,7 @@ static int lenovo_input_mapping_tp10_ultrabook_kbd(struct hid_device *hdev,
map_key_clear(KEY_FN_ESC);
return 1;
case 9: /* Fn-F4: Mic mute */
- map_key_clear(KEY_MICMUTE);
+ map_key_clear(LENOVO_KEY_MICMUTE);
return 1;
case 10: /* Fn-F7: Control panel */
map_key_clear(KEY_CONFIG);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 502/677] KVM: arm64: Initialize VCPU mdcr_el2 before loading it
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (500 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 501/677] HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 503/677] ASoC: simple-card: fix possible uninitialized single_cpu local variable Greg Kroah-Hartman
` (181 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexandru Elisei, Marc Zyngier, Sasha Levin
From: Alexandru Elisei <alexandru.elisei@arm.com>
[ Upstream commit 263d6287da1433aba11c5b4046388f2cdf49675c ]
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/include/asm/kvm_host.h | 1 +
arch/arm64/kvm/arm.c | 2 +
arch/arm64/kvm/debug.c | 88 +++++++++++++++++++++----------
3 files changed, 63 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 3d10e6527f7d..858c2fcfc043 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -713,6 +713,7 @@ static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
void kvm_arm_init_debug(void);
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 85261015ce5d..84b5f79c9eab 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -580,6 +580,8 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
vcpu->arch.has_run_once = true;
+ kvm_arm_vcpu_init_debug(vcpu);
+
if (likely(irqchip_in_kernel(kvm))) {
/*
* Map the VGIC hardware resources before running a vcpu the
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index dbc890511631..2484b2cca74b 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -68,6 +68,64 @@ void kvm_arm_init_debug(void)
__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
}
+/**
+ * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value
+ *
+ * @vcpu: the vcpu pointer
+ *
+ * This ensures we will trap access to:
+ * - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
+ * - Debug ROM Address (MDCR_EL2_TDRA)
+ * - OS related registers (MDCR_EL2_TDOSA)
+ * - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
+ * - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ */
+static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
+{
+ /*
+ * This also clears MDCR_EL2_E2PB_MASK to disable guest access
+ * to the profiling buffer.
+ */
+ vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+ vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
+ MDCR_EL2_TPMS |
+ MDCR_EL2_TTRF |
+ MDCR_EL2_TPMCR |
+ MDCR_EL2_TDRA |
+ MDCR_EL2_TDOSA);
+
+ /* Is the VM being debugged by userspace? */
+ if (vcpu->guest_debug)
+ /* Route all software debug exceptions to EL2 */
+ vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+
+ /*
+ * Trap debug register access when one of the following is true:
+ * - Userspace is using the hardware to debug the guest
+ * (KVM_GUESTDBG_USE_HW is set).
+ * - The guest is not using debug (KVM_ARM64_DEBUG_DIRTY is clear).
+ */
+ if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
+ !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
+ vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
+
+ trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
+}
+
+/**
+ * kvm_arm_vcpu_init_debug - setup vcpu debug traps
+ *
+ * @vcpu: the vcpu pointer
+ *
+ * Set vcpu initial mdcr_el2 value.
+ */
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
+{
+ preempt_disable();
+ kvm_arm_setup_mdcr_el2(vcpu);
+ preempt_enable();
+}
+
/**
* kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
*/
@@ -83,13 +141,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
* @vcpu: the vcpu pointer
*
* This is called before each entry into the hypervisor to setup any
- * debug related registers. Currently this just ensures we will trap
- * access to:
- * - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
- * - Debug ROM Address (MDCR_EL2_TDRA)
- * - OS related registers (MDCR_EL2_TDOSA)
- * - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
- * - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ * debug related registers.
*
* Additionally, KVM only traps guest accesses to the debug registers if
* the guest is not actively using them (see the KVM_ARM64_DEBUG_DIRTY
@@ -101,28 +153,14 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
{
- bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
- /*
- * This also clears MDCR_EL2_E2PB_MASK to disable guest access
- * to the profiling buffer.
- */
- vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
- vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
- MDCR_EL2_TPMS |
- MDCR_EL2_TTRF |
- MDCR_EL2_TPMCR |
- MDCR_EL2_TDRA |
- MDCR_EL2_TDOSA);
+ kvm_arm_setup_mdcr_el2(vcpu);
/* Is Guest debugging in effect? */
if (vcpu->guest_debug) {
- /* Route all software debug exceptions to EL2 */
- vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
-
/* Save guest debug state */
save_guest_debug_regs(vcpu);
@@ -176,7 +214,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
- trap_debug = true;
trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
&vcpu->arch.debug_ptr->dbg_bcr[0],
@@ -191,10 +228,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
BUG_ON(!vcpu->guest_debug &&
vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
- /* Trap debug register access */
- if (trap_debug)
- vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
-
/* If KDE or MDE are set, perform a full save/restore cycle. */
if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
@@ -203,7 +236,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
- trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 503/677] ASoC: simple-card: fix possible uninitialized single_cpu local variable
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (501 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 502/677] KVM: arm64: Initialize VCPU mdcr_el2 before loading it Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 504/677] liquidio: Fix unintented sign extension of a left shift of a u16 Greg Kroah-Hartman
` (180 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Sameer Pujar,
Mark Brown, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[ Upstream commit fa74c223b6fd78a5314b4c61b9abdbed3c2185b4 ]
The 'single_cpu' local variable is assigned by asoc_simple_parse_dai()
and later used in a asoc_simple_canonicalize_cpu() call, assuming the
entire function did not exit on errors.
However the first function returns 0 if passed device_node is NULL,
thus leaving the variable uninitialized and reporting success.
Addresses-Coverity: Uninitialized scalar variable
Fixes: 8f7f298a3337 ("ASoC: simple-card-utils: separate asoc_simple_card_parse_dai()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20210407092027.60769-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/generic/audio-graph-card.c | 2 +-
sound/soc/generic/simple-card.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 8c5cdcdc8713..e81b5cf0d37a 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -380,7 +380,7 @@ static int graph_dai_link_of(struct asoc_simple_priv *priv,
struct device_node *top = dev->of_node;
struct asoc_simple_dai *cpu_dai;
struct asoc_simple_dai *codec_dai;
- int ret, single_cpu;
+ int ret, single_cpu = 0;
/* Do it only CPU turn */
if (!li->cpu)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 75365c7bb393..d916ec69c24f 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -258,7 +258,7 @@ static int simple_dai_link_of(struct asoc_simple_priv *priv,
struct device_node *plat = NULL;
char prop[128];
char *prefix = "";
- int ret, single_cpu;
+ int ret, single_cpu = 0;
/*
* |CPU |Codec : turn
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 504/677] liquidio: Fix unintented sign extension of a left shift of a u16
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (502 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 503/677] ASoC: simple-card: fix possible uninitialized single_cpu local variable Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 505/677] IB/hfi1: Use kzalloc() for mmu_rb_handler allocation Greg Kroah-Hartman
` (179 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, David S. Miller, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 298b58f00c0f86868ea717426beb5c1198772f81 ]
The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.
It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.
Fix this by casting the port parameter to the macro to a u64 before
the shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_regs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_regs.h b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_regs.h
index e6d4ad99cc38..3f1c189646f4 100644
--- a/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_regs.h
+++ b/drivers/net/ethernet/cavium/liquidio/cn23xx_pf_regs.h
@@ -521,7 +521,7 @@
#define CN23XX_BAR1_INDEX_OFFSET 3
#define CN23XX_PEM_BAR1_INDEX_REG(port, idx) \
- (CN23XX_PEM_BAR1_INDEX_START + ((port) << CN23XX_PEM_OFFSET) + \
+ (CN23XX_PEM_BAR1_INDEX_START + (((u64)port) << CN23XX_PEM_OFFSET) + \
((idx) << CN23XX_BAR1_INDEX_OFFSET))
/*############################ DPI #########################*/
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 505/677] IB/hfi1: Use kzalloc() for mmu_rb_handler allocation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (503 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 504/677] liquidio: Fix unintented sign extension of a left shift of a u16 Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 506/677] powerpc/64s: Fix pte update for kernel memory on radix Greg Kroah-Hartman
` (178 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adam Goldman, Mike Marciniszyn,
Dennis Dalessandro, Jason Gunthorpe, Sasha Levin
From: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
[ Upstream commit ca5f72568e034e1295a7ae350b1f786fcbfb2848 ]
The code currently assumes that the mmu_notifier struct
embedded in mmu_rb_handler only contains two fields.
There are now extra fields:
struct mmu_notifier {
struct hlist_node hlist;
const struct mmu_notifier_ops *ops;
struct mm_struct *mm;
struct rcu_head rcu;
unsigned int users;
};
Given that there in no init for the mmu_notifier, a kzalloc() should
be used to insure that any newly added fields are given a predictable
initial value of zero.
Fixes: 06e0ffa69312 ("IB/hfi1: Re-factor MMU notification code")
Link: https://lore.kernel.org/r/1617026056-50483-9-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Adam Goldman <adam.goldman@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/mmu_rb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hfi1/mmu_rb.c b/drivers/infiniband/hw/hfi1/mmu_rb.c
index f3fb28e3d5d7..d213f65d4cdd 100644
--- a/drivers/infiniband/hw/hfi1/mmu_rb.c
+++ b/drivers/infiniband/hw/hfi1/mmu_rb.c
@@ -89,7 +89,7 @@ int hfi1_mmu_rb_register(void *ops_arg,
struct mmu_rb_handler *h;
int ret;
- h = kmalloc(sizeof(*h), GFP_KERNEL);
+ h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
return -ENOMEM;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 506/677] powerpc/64s: Fix pte update for kernel memory on radix
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (504 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 505/677] IB/hfi1: Use kzalloc() for mmu_rb_handler allocation Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 507/677] powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp() Greg Kroah-Hartman
` (177 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jordan Niethe, Nicholas Piggin,
Michael Ellerman, Sasha Levin
From: Jordan Niethe <jniethe5@gmail.com>
[ Upstream commit b8b2f37cf632434456182e9002d63cbc4cccc50c ]
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810
REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000
CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags: 80000001
(1)
expected tramp: c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0
REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000
CFAR: c0000000001a9c98 IRQMASK: 0
GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes: f1cb8f9beba8 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/include/asm/book3s/64/radix.h | 6 ++++--
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 ++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index c7813dc628fc..59cab558e2f0 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -222,8 +222,10 @@ static inline void radix__set_pte_at(struct mm_struct *mm, unsigned long addr,
* from ptesync, it should probably go into update_mmu_cache, rather
* than set_pte_at (which is used to set ptes unrelated to faults).
*
- * Spurious faults to vmalloc region are not tolerated, so there is
- * a ptesync in flush_cache_vmap.
+ * Spurious faults from the kernel memory are not tolerated, so there
+ * is a ptesync in flush_cache_vmap, and __map_kernel_page() follows
+ * the pte update sequence from ISA Book III 6.10 Translation Table
+ * Update Synchronization Requirements.
*/
}
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 98f0b243c1ab..39d488a212a0 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -108,7 +108,7 @@ static int early_map_kernel_page(unsigned long ea, unsigned long pa,
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
- smp_wmb();
+ asm volatile("ptesync": : :"memory");
return 0;
}
@@ -168,7 +168,7 @@ static int __map_kernel_page(unsigned long ea, unsigned long pa,
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
- smp_wmb();
+ asm volatile("ptesync": : :"memory");
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 507/677] powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (505 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 506/677] powerpc/64s: Fix pte update for kernel memory on radix Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 508/677] powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro() Greg Kroah-Hartman
` (176 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Michael Ellerman, Sasha Levin
From: Michael Ellerman <mpe@ellerman.id.au>
[ Upstream commit b56d55a5aa4aa9fc166595a7feb57f153ef7b555 ]
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/lpar.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 3805519a6469..cd38bd421f38 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -977,11 +977,13 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
BUG_ON(slot == -1);
- flags = newpp & 7;
+ flags = newpp & (HPTE_R_PP | HPTE_R_N);
if (mmu_has_feature(MMU_FTR_KERNEL_RO))
/* Move pp0 into bit 8 (IBM 55) */
flags |= (newpp & HPTE_R_PP0) >> 55;
+ flags |= ((newpp & HPTE_R_KEY_HI) >> 48) | (newpp & HPTE_R_KEY_LO);
+
lpar_rc = plpar_pte_protect(flags, slot, 0);
BUG_ON(lpar_rc != H_SUCCESS);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 508/677] powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (506 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 507/677] powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 509/677] powerpc/perf: Fix PMU constraint check for EBB events Greg Kroah-Hartman
` (175 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Ellerman, Daniel Axtens, Sasha Levin
From: Michael Ellerman <mpe@ellerman.id.au>
[ Upstream commit 2c02e656a29d5f64193eb93da92781bcf0517146 ]
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/mm/book3s64/hash_pgtable.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/hash_pgtable.c b/arch/powerpc/mm/book3s64/hash_pgtable.c
index 567e0c6b3978..03819c259f0a 100644
--- a/arch/powerpc/mm/book3s64/hash_pgtable.c
+++ b/arch/powerpc/mm/book3s64/hash_pgtable.c
@@ -428,12 +428,14 @@ static bool hash__change_memory_range(unsigned long start, unsigned long end,
void hash__mark_rodata_ro(void)
{
- unsigned long start, end;
+ unsigned long start, end, pp;
start = (unsigned long)_stext;
end = (unsigned long)__init_begin;
- WARN_ON(!hash__change_memory_range(start, end, PP_RXXX));
+ pp = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL_ROX), HPTE_USE_KERNEL_KEY);
+
+ WARN_ON(!hash__change_memory_range(start, end, pp));
}
void hash__mark_initmem_nx(void)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 509/677] powerpc/perf: Fix PMU constraint check for EBB events
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (507 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 508/677] powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 510/677] powerpc: iommu: fix build when neither PCI or IBMVIO is set Greg Kroah-Hartman
` (174 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Athira Rajeev, Michael Ellerman, Sasha Levin
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ Upstream commit 10f8f96179ecc7f69c927f6d231f6d02736cea83 ]
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at 10004a18 nip 10004a18 lr 100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit 1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes: 4df489991182 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc911792]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/perf/isa207-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index e4f577da33d8..8b5eeb6fb2fb 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -447,8 +447,8 @@ ebb_bhrb:
* EBB events are pinned & exclusive, so this should never actually
* hit, but we leave it as a fallback in case.
*/
- mask |= CNST_EBB_VAL(ebb);
- value |= CNST_EBB_MASK;
+ mask |= CNST_EBB_MASK;
+ value |= CNST_EBB_VAL(ebb);
*maskp = mask;
*valp = value;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 510/677] powerpc: iommu: fix build when neither PCI or IBMVIO is set
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (508 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 509/677] powerpc/perf: Fix PMU constraint check for EBB events Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 511/677] mac80211: bail out if cipher schemes are invalid Greg Kroah-Hartman
` (173 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Michael Ellerman,
Randy Dunlap, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit b27dadecdf9102838331b9a0b41ffc1cfe288154 ]
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index ae084357994e..6342f9da4545 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -353,6 +353,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
config FAIL_IOMMU
bool "Fault-injection capability for IOMMU"
depends on FAULT_INJECTION
+ depends on PCI || IBMVIO
help
Provide fault-injection capability for IOMMU. Each device can
be selectively enabled via the fail_iommu property.
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 511/677] mac80211: bail out if cipher schemes are invalid
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (509 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 510/677] powerpc: iommu: fix build when neither PCI or IBMVIO is set Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 512/677] perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric Greg Kroah-Hartman
` (172 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg, Sasha Levin
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit db878e27a98106a70315d264cc92230d84009e72 ]
If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning. Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.
Fixes: 2475b1cc0d52 ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 1b9c82616606..0331f3a3c40e 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1141,8 +1141,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (local->hw.wiphy->max_scan_ie_len)
local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
- WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
- local->hw.n_cipher_schemes));
+ if (WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
+ local->hw.n_cipher_schemes))) {
+ result = -EINVAL;
+ goto fail_workqueue;
+ }
result = ieee80211_init_cipher_suites(local);
if (result < 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 512/677] perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (510 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 511/677] mac80211: bail out if cipher schemes are invalid Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 513/677] RDMA/hns: Fix missing assignment of max_inline_data Greg Kroah-Hartman
` (171 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Robert Richter, Smita Koralahalli,
Alexander Shishkin, Ian Rogers, Ingo Molnar, Jiri Olsa,
Kim Phillips, Mark Rutland, Martin Liška, Michael Petlan,
Namhyung Kim, Peter Zijlstra, Vijay Thakkar, linux-perf-users,
Arnaldo Carvalho de Melo, Sasha Levin, Arnaldo Carvalho de Melo
From: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
[ Upstream commit 86c2bc3da769124e3e856b6e9457be3667c30919 ]
Commit 08ed77e414ab2342 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":
$ perf list --details
...
l2_cache_accesses_from_l2_hwpf
[L2 Cache Accesses from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
l2_cache_hits_from_l2_hwpf
[L2 Cache Hits from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...
This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.
Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.
Before:
# perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,436 l2_pf_miss_l2_l3 # 11114.00 l2_cache_accesses_from_l2_hwpf
# 11114.00 l2_cache_hits_from_l2_hwpf
4,482 l2_pf_hit_l2
5,196 l2_pf_miss_l2_hit_l3
1.001765339 seconds time elapsed
After:
# perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,477 l2_pf_miss_l2_l3 # 10442.00 l2_cache_accesses_from_l2_hwpf
3,978 l2_pf_hit_l2
4,987 l2_pf_miss_l2_hit_l3
1.001491186 seconds time elapsed
# perf stat -e l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
3,983 l2_cache_hits_from_l2_hwpf
1.001329970 seconds time elapsed
Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.
Fixes: 08ed77e414ab ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/pmu-events/arch/x86/amdzen1/cache.json | 2 +-
tools/perf/pmu-events/arch/x86/amdzen1/recommended.json | 6 +++---
tools/perf/pmu-events/arch/x86/amdzen2/cache.json | 2 +-
tools/perf/pmu-events/arch/x86/amdzen2/recommended.json | 6 +++---
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/cache.json b/tools/perf/pmu-events/arch/x86/amdzen1/cache.json
index 4ea7ec4f496e..008f1683e540 100644
--- a/tools/perf/pmu-events/arch/x86/amdzen1/cache.json
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/cache.json
@@ -275,7 +275,7 @@
{
"EventName": "l2_pf_hit_l2",
"EventCode": "0x70",
- "BriefDescription": "L2 prefetch hit in L2.",
+ "BriefDescription": "L2 prefetch hit in L2. Use l2_cache_hits_from_l2_hwpf instead.",
"UMask": "0xff"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/amdzen1/recommended.json b/tools/perf/pmu-events/arch/x86/amdzen1/recommended.json
index 2cfe2d2f3bfd..3c954543d1ae 100644
--- a/tools/perf/pmu-events/arch/x86/amdzen1/recommended.json
+++ b/tools/perf/pmu-events/arch/x86/amdzen1/recommended.json
@@ -79,10 +79,10 @@
"UMask": "0x70"
},
{
- "MetricName": "l2_cache_hits_from_l2_hwpf",
+ "EventName": "l2_cache_hits_from_l2_hwpf",
+ "EventCode": "0x70",
"BriefDescription": "L2 Cache Hits from L2 HWPF",
- "MetricExpr": "l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3",
- "MetricGroup": "l2_cache"
+ "UMask": "0xff"
},
{
"EventName": "l3_accesses",
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/cache.json b/tools/perf/pmu-events/arch/x86/amdzen2/cache.json
index f61b982f83ca..8ba84a48188d 100644
--- a/tools/perf/pmu-events/arch/x86/amdzen2/cache.json
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/cache.json
@@ -205,7 +205,7 @@
{
"EventName": "l2_pf_hit_l2",
"EventCode": "0x70",
- "BriefDescription": "L2 prefetch hit in L2.",
+ "BriefDescription": "L2 prefetch hit in L2. Use l2_cache_hits_from_l2_hwpf instead.",
"UMask": "0xff"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/amdzen2/recommended.json b/tools/perf/pmu-events/arch/x86/amdzen2/recommended.json
index 2ef91e25e661..1c624cee9ef4 100644
--- a/tools/perf/pmu-events/arch/x86/amdzen2/recommended.json
+++ b/tools/perf/pmu-events/arch/x86/amdzen2/recommended.json
@@ -79,10 +79,10 @@
"UMask": "0x70"
},
{
- "MetricName": "l2_cache_hits_from_l2_hwpf",
+ "EventName": "l2_cache_hits_from_l2_hwpf",
+ "EventCode": "0x70",
"BriefDescription": "L2 Cache Hits from L2 HWPF",
- "MetricExpr": "l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3",
- "MetricGroup": "l2_cache"
+ "UMask": "0xff"
},
{
"EventName": "l3_accesses",
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 513/677] RDMA/hns: Fix missing assignment of max_inline_data
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (511 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 512/677] perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 514/677] xfs: fix return of uninitialized value in variable error Greg Kroah-Hartman
` (170 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Weihang Li, Jason Gunthorpe, Sasha Levin
From: Weihang Li <liweihang@huawei.com>
[ Upstream commit 9eab614338cdfe08db343954454fa5191d082a11 ]
When querying QP, the ULPs should be informed of the max length of inline
data supported by the hardware.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/1617354454-47840-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index ce26f97b2ca2..ad3cee54140e 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -5068,6 +5068,7 @@ done:
qp_attr->cur_qp_state = qp_attr->qp_state;
qp_attr->cap.max_recv_wr = hr_qp->rq.wqe_cnt;
qp_attr->cap.max_recv_sge = hr_qp->rq.max_gs - hr_qp->rq.rsv_sge;
+ qp_attr->cap.max_inline_data = hr_qp->max_inline_data;
if (!ibqp->uobject) {
qp_attr->cap.max_send_wr = hr_qp->sq.wqe_cnt;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 514/677] xfs: fix return of uninitialized value in variable error
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (512 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 513/677] RDMA/hns: Fix missing assignment of max_inline_data Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 515/677] rtw88: Fix an error code in rtw_debugfs_set_rsvd_page() Greg Kroah-Hartman
` (169 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Brian Foster,
Darrick J. Wong, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 3b6dd9a9aeeada19d0c820ff68e979243a888bb6 ]
A previous commit removed a call to xfs_attr3_leaf_read that
assigned an error return code to variable error. We now have
a few early error return paths to label 'out' that return
error if error is set; however error now is uninitialized
so potentially garbage is being returned. Fix this by setting
error to zero to restore the original behaviour where error
was zero at the label 'restart'.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/xfs/libxfs/xfs_attr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
index 472b3039eabb..902e5f7e6642 100644
--- a/fs/xfs/libxfs/xfs_attr.c
+++ b/fs/xfs/libxfs/xfs_attr.c
@@ -928,6 +928,7 @@ restart:
* Search to see if name already exists, and get back a pointer
* to where it should go.
*/
+ error = 0;
retval = xfs_attr_node_hasname(args, &state);
if (retval != -ENOATTR && retval != -EEXIST)
goto out;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 515/677] rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (513 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 514/677] xfs: fix return of uninitialized value in variable error Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 516/677] mt7601u: fix always true expression Greg Kroah-Hartman
` (168 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Kalle Valo, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit c9eaee0c2ec6b1002044fb698cdfb5d9ef4ed28c ]
The sscanf() function returns the number of matches (0 or 1 in this
case). It doesn't return error codes. We should return -EINVAL if the
string is invalid
Fixes: c376c1fc87b7 ("rtw88: add h2c command in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YE8nmatMDBDDWkjq@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw88/debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw88/debug.c b/drivers/net/wireless/realtek/rtw88/debug.c
index 948cb79050ea..e7d51ac9b689 100644
--- a/drivers/net/wireless/realtek/rtw88/debug.c
+++ b/drivers/net/wireless/realtek/rtw88/debug.c
@@ -270,7 +270,7 @@ static ssize_t rtw_debugfs_set_rsvd_page(struct file *filp,
if (num != 2) {
rtw_warn(rtwdev, "invalid arguments\n");
- return num;
+ return -EINVAL;
}
debugfs_priv->rsvd_page.page_offset = offset;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 516/677] mt7601u: fix always true expression
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (514 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 515/677] rtw88: Fix an error code in rtw_debugfs_set_rsvd_page() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 517/677] mt76: mt7615: fix tx skb dma unmap Greg Kroah-Hartman
` (167 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Jakub Kicinski,
Kalle Valo, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ]
Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true. If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.
Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.
Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/eeprom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.c b/drivers/net/wireless/mediatek/mt7601u/eeprom.c
index c868582c5d22..aa3b64902cf9 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.c
@@ -99,7 +99,7 @@ mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom)
{
u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1);
- return ~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN);
+ return (u16)~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN);
}
static void
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 517/677] mt76: mt7615: fix tx skb dma unmap
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (515 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 516/677] mt7601u: fix always true expression Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 518/677] mt76: mt7915: " Greg Kroah-Hartman
` (166 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Felix Fietkau, Sasha Levin
From: Felix Fietkau <nbd@nbd.name>
[ Upstream commit ebee7885bb12a8fe2c2f9bac87dbd87a05b645f9 ]
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 62cbca5f3be4..1abfd58e8f49 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -690,7 +690,7 @@ mt7615_txp_skb_unmap_fw(struct mt76_dev *dev, struct mt7615_fw_txp *txp)
{
int i;
- for (i = 1; i < txp->nbuf; i++)
+ for (i = 0; i < txp->nbuf; i++)
dma_unmap_single(dev->dev, le32_to_cpu(txp->buf[i]),
le16_to_cpu(txp->len[i]), DMA_TO_DEVICE);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 518/677] mt76: mt7915: fix tx skb dma unmap
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (516 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 517/677] mt76: mt7615: fix tx skb dma unmap Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 519/677] mt76: mt7921: fix suspend/resume sequence Greg Kroah-Hartman
` (165 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ben Greear, Felix Fietkau, Sasha Levin
From: Felix Fietkau <nbd@nbd.name>
[ Upstream commit 7dcf3c04f0aca746517a77433b33d40868ca4749 ]
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Reported-by: Ben Greear <greearb@candelatech.com>
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index e5a258958ac9..b79d614aaad9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1091,7 +1091,7 @@ void mt7915_txp_skb_unmap(struct mt76_dev *dev,
int i;
txp = mt7915_txwi_to_txp(dev, t);
- for (i = 1; i < txp->nbuf; i++)
+ for (i = 0; i < txp->nbuf; i++)
dma_unmap_single(dev->dev, le32_to_cpu(txp->buf[i]),
le16_to_cpu(txp->len[i]), DMA_TO_DEVICE);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 519/677] mt76: mt7921: fix suspend/resume sequence
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (517 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 518/677] mt76: mt7915: " Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 520/677] mt76: mt7921: fix memory leak in mt7921_coredump_work Greg Kroah-Hartman
` (164 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Lorenzo Bianconi,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 5e30931494b4940ba74fa5796ca0b6d7e4c84e88 ]
Any pcie access should happen in pci D0 state and we should give ownership
back to the device at the end of the suspend procedure.
Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 5570b4a50531..c747022f7642 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -209,12 +209,12 @@ static int mt7921_pci_suspend(struct pci_dev *pdev, pm_message_t state)
/* disable interrupt */
mt76_wr(dev, MT_WFDMA0_HOST_INT_ENA, 0);
- pci_save_state(pdev);
- err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ err = mt7921_mcu_fw_pmctrl(dev);
if (err)
goto restore;
- err = mt7921_mcu_drv_pmctrl(dev);
+ pci_save_state(pdev);
+ err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
if (err)
goto restore;
@@ -237,16 +237,16 @@ static int mt7921_pci_resume(struct pci_dev *pdev)
struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
int i, err;
- err = mt7921_mcu_fw_pmctrl(dev);
- if (err < 0)
- return err;
-
err = pci_set_power_state(pdev, PCI_D0);
if (err)
return err;
pci_restore_state(pdev);
+ err = mt7921_mcu_drv_pmctrl(dev);
+ if (err < 0)
+ return err;
+
/* enable interrupt */
mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
mt7921_irq_enable(dev, MT_INT_RX_DONE_ALL | MT_INT_TX_DONE_ALL |
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 520/677] mt76: mt7921: fix memory leak in mt7921_coredump_work
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (518 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 519/677] mt76: mt7921: fix suspend/resume sequence Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 521/677] mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss Greg Kroah-Hartman
` (163 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Lorenzo Bianconi,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 782b3e86ea970e899f8e723db9f64708a15ca30e ]
Fix possible memory leak in mt7921_coredump_work.
Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 3f9097481a5e..d51ec8a550d8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -1503,8 +1503,10 @@ void mt7921_coredump_work(struct work_struct *work)
break;
skb_pull(skb, sizeof(struct mt7921_mcu_rxd));
- if (data + skb->len - dump > MT76_CONNAC_COREDUMP_SZ)
- break;
+ if (data + skb->len - dump > MT76_CONNAC_COREDUMP_SZ) {
+ dev_kfree_skb(skb);
+ continue;
+ }
memcpy(data, skb->data, skb->len);
data += skb->len;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 521/677] mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (519 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 520/677] mt76: mt7921: fix memory leak in mt7921_coredump_work Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 522/677] mt76: mt7921: fixup rx bitrate statistics Greg Kroah-Hartman
` (162 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Soul Huang, Sean Wang,
Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit a7e3033fcdb60ad51b03896ae99ad9447389bed0 ]
Use proper value for ht40 mode configuration in mt76_connac_mcu_uni_add_bss
routine and not ht20 one
Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 6cbccfb05f8b..4356bf130dbd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -1195,6 +1195,7 @@ int mt76_connac_mcu_uni_add_bss(struct mt76_phy *phy,
.center_chan = ieee80211_frequency_to_channel(freq1),
.center_chan2 = ieee80211_frequency_to_channel(freq2),
.tx_streams = hweight8(phy->antenna_mask),
+ .ht_op_info = 4, /* set HT 40M allowed */
.rx_streams = phy->chainmask,
.short_st = true,
},
@@ -1287,6 +1288,7 @@ int mt76_connac_mcu_uni_add_bss(struct mt76_phy *phy,
case NL80211_CHAN_WIDTH_20:
default:
rlm_req.rlm.bw = CMD_CBW_20MHZ;
+ rlm_req.rlm.ht_op_info = 0;
break;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 522/677] mt76: mt7921: fixup rx bitrate statistics
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (520 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 521/677] mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 523/677] mt76: mt7615: fix memory leak in mt7615_coredump_work Greg Kroah-Hartman
` (161 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Lorenzo Bianconi,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 0940605a2a70803fc3362eeccba4c31adf4e70e7 ]
Since the related rx bitrate fields have been moved to group3 in Rxv,
fix rx bitrate statistics in mt7921_mac_fill_rx routine.
Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7921/mac.c | 155 +++++++++---------
.../net/wireless/mediatek/mt76/mt7921/mac.h | 10 +-
2 files changed, 86 insertions(+), 79 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index d51ec8a550d8..b4388a290753 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -400,7 +400,9 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
/* RXD Group 3 - P-RXV */
if (rxd1 & MT_RXD1_NORMAL_GROUP_3) {
- u32 v0, v1, v2;
+ u8 stbc, gi;
+ u32 v0, v1;
+ bool cck;
rxv = rxd;
rxd += 2;
@@ -409,7 +411,6 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
v0 = le32_to_cpu(rxv[0]);
v1 = le32_to_cpu(rxv[1]);
- v2 = le32_to_cpu(rxv[2]);
if (v0 & MT_PRXV_HT_AD_CODE)
status->enc_flags |= RX_ENC_FLAG_LDPC;
@@ -429,87 +430,87 @@ int mt7921_mac_fill_rx(struct mt7921_dev *dev, struct sk_buff *skb)
status->chain_signal[i]);
}
- /* RXD Group 5 - C-RXV */
- if (rxd1 & MT_RXD1_NORMAL_GROUP_5) {
- u8 stbc = FIELD_GET(MT_CRXV_HT_STBC, v2);
- u8 gi = FIELD_GET(MT_CRXV_HT_SHORT_GI, v2);
- bool cck = false;
+ stbc = FIELD_GET(MT_PRXV_STBC, v0);
+ gi = FIELD_GET(MT_PRXV_SGI, v0);
+ cck = false;
- rxd += 18;
- if ((u8 *)rxd - skb->data >= skb->len)
- return -EINVAL;
+ idx = i = FIELD_GET(MT_PRXV_TX_RATE, v0);
+ mode = FIELD_GET(MT_PRXV_TX_MODE, v0);
- idx = i = FIELD_GET(MT_PRXV_TX_RATE, v0);
- mode = FIELD_GET(MT_CRXV_TX_MODE, v2);
-
- switch (mode) {
- case MT_PHY_TYPE_CCK:
- cck = true;
- fallthrough;
- case MT_PHY_TYPE_OFDM:
- i = mt76_get_rate(&dev->mt76, sband, i, cck);
- break;
- case MT_PHY_TYPE_HT_GF:
- case MT_PHY_TYPE_HT:
- status->encoding = RX_ENC_HT;
- if (i > 31)
- return -EINVAL;
- break;
- case MT_PHY_TYPE_VHT:
- status->nss =
- FIELD_GET(MT_PRXV_NSTS, v0) + 1;
- status->encoding = RX_ENC_VHT;
- if (i > 9)
- return -EINVAL;
- break;
- case MT_PHY_TYPE_HE_MU:
- status->flag |= RX_FLAG_RADIOTAP_HE_MU;
- fallthrough;
- case MT_PHY_TYPE_HE_SU:
- case MT_PHY_TYPE_HE_EXT_SU:
- case MT_PHY_TYPE_HE_TB:
- status->nss =
- FIELD_GET(MT_PRXV_NSTS, v0) + 1;
- status->encoding = RX_ENC_HE;
- status->flag |= RX_FLAG_RADIOTAP_HE;
- i &= GENMASK(3, 0);
-
- if (gi <= NL80211_RATE_INFO_HE_GI_3_2)
- status->he_gi = gi;
-
- status->he_dcm = !!(idx & MT_PRXV_TX_DCM);
- break;
- default:
+ switch (mode) {
+ case MT_PHY_TYPE_CCK:
+ cck = true;
+ fallthrough;
+ case MT_PHY_TYPE_OFDM:
+ i = mt76_get_rate(&dev->mt76, sband, i, cck);
+ break;
+ case MT_PHY_TYPE_HT_GF:
+ case MT_PHY_TYPE_HT:
+ status->encoding = RX_ENC_HT;
+ if (i > 31)
return -EINVAL;
- }
- status->rate_idx = i;
-
- switch (FIELD_GET(MT_CRXV_FRAME_MODE, v2)) {
- case IEEE80211_STA_RX_BW_20:
- break;
- case IEEE80211_STA_RX_BW_40:
- if (mode & MT_PHY_TYPE_HE_EXT_SU &&
- (idx & MT_PRXV_TX_ER_SU_106T)) {
- status->bw = RATE_INFO_BW_HE_RU;
- status->he_ru =
- NL80211_RATE_INFO_HE_RU_ALLOC_106;
- } else {
- status->bw = RATE_INFO_BW_40;
- }
- break;
- case IEEE80211_STA_RX_BW_80:
- status->bw = RATE_INFO_BW_80;
- break;
- case IEEE80211_STA_RX_BW_160:
- status->bw = RATE_INFO_BW_160;
- break;
- default:
+ break;
+ case MT_PHY_TYPE_VHT:
+ status->nss =
+ FIELD_GET(MT_PRXV_NSTS, v0) + 1;
+ status->encoding = RX_ENC_VHT;
+ if (i > 9)
return -EINVAL;
+ break;
+ case MT_PHY_TYPE_HE_MU:
+ status->flag |= RX_FLAG_RADIOTAP_HE_MU;
+ fallthrough;
+ case MT_PHY_TYPE_HE_SU:
+ case MT_PHY_TYPE_HE_EXT_SU:
+ case MT_PHY_TYPE_HE_TB:
+ status->nss =
+ FIELD_GET(MT_PRXV_NSTS, v0) + 1;
+ status->encoding = RX_ENC_HE;
+ status->flag |= RX_FLAG_RADIOTAP_HE;
+ i &= GENMASK(3, 0);
+
+ if (gi <= NL80211_RATE_INFO_HE_GI_3_2)
+ status->he_gi = gi;
+
+ status->he_dcm = !!(idx & MT_PRXV_TX_DCM);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ status->rate_idx = i;
+
+ switch (FIELD_GET(MT_PRXV_FRAME_MODE, v0)) {
+ case IEEE80211_STA_RX_BW_20:
+ break;
+ case IEEE80211_STA_RX_BW_40:
+ if (mode & MT_PHY_TYPE_HE_EXT_SU &&
+ (idx & MT_PRXV_TX_ER_SU_106T)) {
+ status->bw = RATE_INFO_BW_HE_RU;
+ status->he_ru =
+ NL80211_RATE_INFO_HE_RU_ALLOC_106;
+ } else {
+ status->bw = RATE_INFO_BW_40;
}
+ break;
+ case IEEE80211_STA_RX_BW_80:
+ status->bw = RATE_INFO_BW_80;
+ break;
+ case IEEE80211_STA_RX_BW_160:
+ status->bw = RATE_INFO_BW_160;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc;
+ if (mode < MT_PHY_TYPE_HE_SU && gi)
+ status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
- status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc;
- if (mode < MT_PHY_TYPE_HE_SU && gi)
- status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
+ if (rxd1 & MT_RXD1_NORMAL_GROUP_5) {
+ rxd += 18;
+ if ((u8 *)rxd - skb->data >= skb->len)
+ return -EINVAL;
}
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.h b/drivers/net/wireless/mediatek/mt76/mt7921/mac.h
index a0c1fa0f20e4..109c8849d106 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.h
@@ -97,18 +97,24 @@ enum rx_pkt_type {
#define MT_RXD3_NORMAL_PF_MODE BIT(29)
#define MT_RXD3_NORMAL_PF_STS GENMASK(31, 30)
-/* P-RXV */
+/* P-RXV DW0 */
#define MT_PRXV_TX_RATE GENMASK(6, 0)
#define MT_PRXV_TX_DCM BIT(4)
#define MT_PRXV_TX_ER_SU_106T BIT(5)
#define MT_PRXV_NSTS GENMASK(9, 7)
#define MT_PRXV_HT_AD_CODE BIT(11)
+#define MT_PRXV_FRAME_MODE GENMASK(14, 12)
+#define MT_PRXV_SGI GENMASK(16, 15)
+#define MT_PRXV_STBC GENMASK(23, 22)
+#define MT_PRXV_TX_MODE GENMASK(27, 24)
#define MT_PRXV_HE_RU_ALLOC_L GENMASK(31, 28)
-#define MT_PRXV_HE_RU_ALLOC_H GENMASK(3, 0)
+
+/* P-RXV DW1 */
#define MT_PRXV_RCPI3 GENMASK(31, 24)
#define MT_PRXV_RCPI2 GENMASK(23, 16)
#define MT_PRXV_RCPI1 GENMASK(15, 8)
#define MT_PRXV_RCPI0 GENMASK(7, 0)
+#define MT_PRXV_HE_RU_ALLOC_H GENMASK(3, 0)
/* C-RXV */
#define MT_CRXV_HT_STBC GENMASK(1, 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 523/677] mt76: mt7615: fix memory leak in mt7615_coredump_work
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (521 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 522/677] mt76: mt7921: fixup rx bitrate statistics Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 524/677] mt76: mt7921: fix aggr length histogram Greg Kroah-Hartman
` (160 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 49cc85059a2cb656f96ff3693f891e8fe8f669a9 ]
Similar to the issue fixed in mt7921_coredump_work, fix a possible memory
leak in mt7615_coredump_work routine.
Fixes: d2bf7959d9c0f ("mt76: mt7663: introduce coredump support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 1abfd58e8f49..b313442b2d9e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2308,8 +2308,10 @@ void mt7615_coredump_work(struct work_struct *work)
break;
skb_pull(skb, sizeof(struct mt7615_mcu_rxd));
- if (data + skb->len - dump > MT76_CONNAC_COREDUMP_SZ)
- break;
+ if (data + skb->len - dump > MT76_CONNAC_COREDUMP_SZ) {
+ dev_kfree_skb(skb);
+ continue;
+ }
memcpy(data, skb->data, skb->len);
data += skb->len;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 524/677] mt76: mt7921: fix aggr length histogram
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (522 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 523/677] mt76: mt7615: fix memory leak in mt7615_coredump_work Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 525/677] mt76: mt7915: fix aggr len debugfs node Greg Kroah-Hartman
` (159 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 461e3b7f45766f38eeb24ca7354ff01d993b5b47 ]
Fix register definitions for 802.11 aggr length histogram estimation.
Fixes: 474a9f21e2e2 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c | 5 ++---
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 6 +++---
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
index 0dc8e25e18e4..6aa11ca6fc81 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
@@ -44,14 +44,13 @@ mt7921_ampdu_stat_read_phy(struct mt7921_phy *phy,
range[i] = mt76_rr(dev, MT_MIB_ARNG(0, i));
for (i = 0; i < ARRAY_SIZE(bound); i++)
- bound[i] = MT_MIB_ARNCR_RANGE(range[i / 4], i) + 1;
+ bound[i] = MT_MIB_ARNCR_RANGE(range[i / 4], i % 4) + 1;
seq_printf(file, "\nPhy0\n");
seq_printf(file, "Length: %8d | ", bound[0]);
for (i = 0; i < ARRAY_SIZE(bound) - 1; i++)
- seq_printf(file, "%3d -%3d | ",
- bound[i] + 1, bound[i + 1]);
+ seq_printf(file, "%3d %3d | ", bound[i] + 1, bound[i + 1]);
seq_puts(file, "\nCount: ");
for (i = 0; i < ARRAY_SIZE(bound); i++)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 6dad7f6ab09d..11d5aa44ae7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -128,9 +128,9 @@
#define MT_MIB_MB_SDR2(_band, n) MT_WF_MIB(_band, 0x108 + ((n) << 4))
#define MT_MIB_FRAME_RETRIES_COUNT_MASK GENMASK(15, 0)
-#define MT_TX_AGG_CNT(_band, n) MT_WF_MIB(_band, 0x0a8 + ((n) << 2))
-#define MT_TX_AGG_CNT2(_band, n) MT_WF_MIB(_band, 0x164 + ((n) << 2))
-#define MT_MIB_ARNG(_band, n) MT_WF_MIB(_band, 0x4b8 + ((n) << 2))
+#define MT_TX_AGG_CNT(_band, n) MT_WF_MIB(_band, 0x7dc + ((n) << 2))
+#define MT_TX_AGG_CNT2(_band, n) MT_WF_MIB(_band, 0x7ec + ((n) << 2))
+#define MT_MIB_ARNG(_band, n) MT_WF_MIB(_band, 0x0b0 + ((n) << 2))
#define MT_MIB_ARNCR_RANGE(val, n) (((val) >> ((n) << 3)) & GENMASK(7, 0))
#define MT_WTBLON_TOP_BASE 0x34000
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 525/677] mt76: mt7915: fix aggr len debugfs node
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (523 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 524/677] mt76: mt7921: fix aggr length histogram Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 526/677] mt76: mt7921: fix stats register definitions Greg Kroah-Hartman
` (158 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 9fb9d755fae20b5ad62ef8b4e9289e5baea2c6fc ]
Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
index 77dcd71e49a5..2f706620686e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
@@ -124,7 +124,7 @@ mt7915_ampdu_stat_read_phy(struct mt7915_phy *phy,
range[i] = mt76_rr(dev, MT_MIB_ARNG(ext_phy, i));
for (i = 0; i < ARRAY_SIZE(bound); i++)
- bound[i] = MT_MIB_ARNCR_RANGE(range[i / 4], i) + 1;
+ bound[i] = MT_MIB_ARNCR_RANGE(range[i / 4], i % 4) + 1;
seq_printf(file, "\nPhy %d\n", ext_phy);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 526/677] mt76: mt7921: fix stats register definitions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (524 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 525/677] mt76: mt7915: fix aggr len debugfs node Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 527/677] mt76: mt7615: fix TSF configuration Greg Kroah-Hartman
` (157 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit f76e9019913bffee0e49b096068e6f6b12f9b0e0 ]
Fix register definitions for mac80211 stats reporting.
Move mib counter reset to mt7921_get_stats routine.
Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7921/mac.c | 31 ++++++-------------
.../net/wireless/mediatek/mt76/mt7921/main.c | 6 ++++
.../wireless/mediatek/mt76/mt7921/mt7921.h | 10 +++---
.../net/wireless/mediatek/mt76/mt7921/regs.h | 15 ++++++---
4 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index b4388a290753..a6d2a25b3495 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -1318,31 +1318,20 @@ mt7921_mac_update_mib_stats(struct mt7921_phy *phy)
struct mib_stats *mib = &phy->mib;
int i, aggr0 = 0, aggr1;
- memset(mib, 0, sizeof(*mib));
-
- mib->fcs_err_cnt = mt76_get_field(dev, MT_MIB_SDR3(0),
- MT_MIB_SDR3_FCS_ERR_MASK);
+ mib->fcs_err_cnt += mt76_get_field(dev, MT_MIB_SDR3(0),
+ MT_MIB_SDR3_FCS_ERR_MASK);
+ mib->ack_fail_cnt += mt76_get_field(dev, MT_MIB_MB_BSDR3(0),
+ MT_MIB_ACK_FAIL_COUNT_MASK);
+ mib->ba_miss_cnt += mt76_get_field(dev, MT_MIB_MB_BSDR2(0),
+ MT_MIB_BA_FAIL_COUNT_MASK);
+ mib->rts_cnt += mt76_get_field(dev, MT_MIB_MB_BSDR0(0),
+ MT_MIB_RTS_COUNT_MASK);
+ mib->rts_retries_cnt += mt76_get_field(dev, MT_MIB_MB_BSDR1(0),
+ MT_MIB_RTS_FAIL_COUNT_MASK);
for (i = 0, aggr1 = aggr0 + 4; i < 4; i++) {
u32 val, val2;
- val = mt76_rr(dev, MT_MIB_MB_SDR1(0, i));
-
- val2 = FIELD_GET(MT_MIB_ACK_FAIL_COUNT_MASK, val);
- if (val2 > mib->ack_fail_cnt)
- mib->ack_fail_cnt = val2;
-
- val2 = FIELD_GET(MT_MIB_BA_MISS_COUNT_MASK, val);
- if (val2 > mib->ba_miss_cnt)
- mib->ba_miss_cnt = val2;
-
- val = mt76_rr(dev, MT_MIB_MB_SDR0(0, i));
- val2 = FIELD_GET(MT_MIB_RTS_RETRIES_COUNT_MASK, val);
- if (val2 > mib->rts_retries_cnt) {
- mib->rts_cnt = FIELD_GET(MT_MIB_RTS_COUNT_MASK, val);
- mib->rts_retries_cnt = val2;
- }
-
val = mt76_rr(dev, MT_TX_AGG_CNT(0, i));
val2 = mt76_rr(dev, MT_TX_AGG_CNT2(0, i));
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 729f6c42cdde..3566059e5704 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -814,11 +814,17 @@ mt7921_get_stats(struct ieee80211_hw *hw,
struct mt7921_phy *phy = mt7921_hw_phy(hw);
struct mib_stats *mib = &phy->mib;
+ mt7921_mutex_acquire(phy->dev);
+
stats->dot11RTSSuccessCount = mib->rts_cnt;
stats->dot11RTSFailureCount = mib->rts_retries_cnt;
stats->dot11FCSErrorCount = mib->fcs_err_cnt;
stats->dot11ACKFailureCount = mib->ack_fail_cnt;
+ memset(mib, 0, sizeof(*mib));
+
+ mt7921_mutex_release(phy->dev);
+
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
index 46e6aeec35ae..2979d06ee0ad 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
@@ -102,11 +102,11 @@ struct mt7921_vif {
};
struct mib_stats {
- u16 ack_fail_cnt;
- u16 fcs_err_cnt;
- u16 rts_cnt;
- u16 rts_retries_cnt;
- u16 ba_miss_cnt;
+ u32 ack_fail_cnt;
+ u32 fcs_err_cnt;
+ u32 rts_cnt;
+ u32 rts_retries_cnt;
+ u32 ba_miss_cnt;
};
struct mt7921_phy {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 11d5aa44ae7b..2dd2e628b776 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -96,8 +96,8 @@
#define MT_WF_MIB_BASE(_band) ((_band) ? 0xa4800 : 0x24800)
#define MT_WF_MIB(_band, ofs) (MT_WF_MIB_BASE(_band) + (ofs))
-#define MT_MIB_SDR3(_band) MT_WF_MIB(_band, 0x014)
-#define MT_MIB_SDR3_FCS_ERR_MASK GENMASK(15, 0)
+#define MT_MIB_SDR3(_band) MT_WF_MIB(_band, 0x698)
+#define MT_MIB_SDR3_FCS_ERR_MASK GENMASK(31, 16)
#define MT_MIB_SDR9(_band) MT_WF_MIB(_band, 0x02c)
#define MT_MIB_SDR9_BUSY_MASK GENMASK(23, 0)
@@ -121,9 +121,14 @@
#define MT_MIB_RTS_RETRIES_COUNT_MASK GENMASK(31, 16)
#define MT_MIB_RTS_COUNT_MASK GENMASK(15, 0)
-#define MT_MIB_MB_SDR1(_band, n) MT_WF_MIB(_band, 0x104 + ((n) << 4))
-#define MT_MIB_BA_MISS_COUNT_MASK GENMASK(15, 0)
-#define MT_MIB_ACK_FAIL_COUNT_MASK GENMASK(31, 16)
+#define MT_MIB_MB_BSDR0(_band) MT_WF_MIB(_band, 0x688)
+#define MT_MIB_RTS_COUNT_MASK GENMASK(15, 0)
+#define MT_MIB_MB_BSDR1(_band) MT_WF_MIB(_band, 0x690)
+#define MT_MIB_RTS_FAIL_COUNT_MASK GENMASK(15, 0)
+#define MT_MIB_MB_BSDR2(_band) MT_WF_MIB(_band, 0x518)
+#define MT_MIB_BA_FAIL_COUNT_MASK GENMASK(15, 0)
+#define MT_MIB_MB_BSDR3(_band) MT_WF_MIB(_band, 0x520)
+#define MT_MIB_ACK_FAIL_COUNT_MASK GENMASK(15, 0)
#define MT_MIB_MB_SDR2(_band, n) MT_WF_MIB(_band, 0x108 + ((n) << 4))
#define MT_MIB_FRAME_RETRIES_COUNT_MASK GENMASK(15, 0)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 527/677] mt76: mt7615: fix TSF configuration
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (525 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 526/677] mt76: mt7921: fix stats register definitions Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 528/677] mt76: mt7615: fix mib stats counter reporting to mac80211 Greg Kroah-Hartman
` (156 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit a4a5a430b076860691e95337787bc666c8ab28ff ]
The index of TSF counters should follow HWBSSID.
Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 6 +++++-
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 16 ++++++++++++++--
drivers/net/wireless/mediatek/mt76/mt7615/regs.h | 7 ++++---
.../net/wireless/mediatek/mt76/mt7615/usb_sdio.c | 6 +++++-
4 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index b313442b2d9e..e9c341e193f4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -966,6 +966,7 @@ void mt7615_mac_set_rates(struct mt7615_phy *phy, struct mt7615_sta *sta,
struct mt7615_dev *dev = phy->dev;
struct mt7615_rate_desc rd;
u32 w5, w27, addr;
+ u16 idx = sta->vif->mt76.omac_idx;
if (!mt76_is_mmio(&dev->mt76)) {
mt7615_mac_queue_rate_update(phy, sta, probe_rate, rates);
@@ -1017,7 +1018,10 @@ void mt7615_mac_set_rates(struct mt7615_phy *phy, struct mt7615_sta *sta,
mt76_wr(dev, addr + 27 * 4, w27);
- mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_MODE); /* TSF read */
+ idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
+ addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
+
+ mt76_set(dev, addr, MT_LPON_TCR_MODE); /* TSF read */
sta->rate_set_tsf = mt76_rr(dev, MT_LPON_UTTR0) & ~BIT(0);
sta->rate_set_tsf |= rd.rateset;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 25faf486d279..ca74575569ae 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -814,15 +814,21 @@ mt7615_get_stats(struct ieee80211_hw *hw,
static u64
mt7615_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
+ struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
struct mt7615_dev *dev = mt7615_hw_dev(hw);
union {
u64 t64;
u32 t32[2];
} tsf;
+ u16 idx = mvif->mt76.omac_idx;
+ u32 reg;
+
+ idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
+ reg = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
mt7615_mutex_acquire(dev);
- mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_MODE); /* TSF read */
+ mt76_set(dev, reg, MT_LPON_TCR_MODE); /* TSF read */
tsf.t32[0] = mt76_rr(dev, MT_LPON_UTTR0);
tsf.t32[1] = mt76_rr(dev, MT_LPON_UTTR1);
@@ -835,18 +841,24 @@ static void
mt7615_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u64 timestamp)
{
+ struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
struct mt7615_dev *dev = mt7615_hw_dev(hw);
union {
u64 t64;
u32 t32[2];
} tsf = { .t64 = timestamp, };
+ u16 idx = mvif->mt76.omac_idx;
+ u32 reg;
+
+ idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
+ reg = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
mt7615_mutex_acquire(dev);
mt76_wr(dev, MT_LPON_UTTR0, tsf.t32[0]);
mt76_wr(dev, MT_LPON_UTTR1, tsf.t32[1]);
/* TSF software overwrite */
- mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_WRITE);
+ mt76_set(dev, reg, MT_LPON_TCR_WRITE);
mt7615_mutex_release(dev);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
index 6e5db015b32c..6e4710d3ddd3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
@@ -447,9 +447,10 @@ enum mt7615_reg_base {
#define MT_LPON(_n) ((dev)->reg_map[MT_LPON_BASE] + (_n))
-#define MT_LPON_T0CR MT_LPON(0x010)
-#define MT_LPON_T0CR_MODE GENMASK(1, 0)
-#define MT_LPON_T0CR_WRITE BIT(0)
+#define MT_LPON_TCR0(_n) MT_LPON(0x010 + ((_n) * 4))
+#define MT_LPON_TCR2(_n) MT_LPON(0x0f8 + ((_n) - 2) * 4)
+#define MT_LPON_TCR_MODE GENMASK(1, 0)
+#define MT_LPON_TCR_WRITE BIT(0)
#define MT_LPON_UTTR0 MT_LPON(0x018)
#define MT_LPON_UTTR1 MT_LPON(0x01c)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c b/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
index 203256862dfd..4a370b9f7a17 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
@@ -67,6 +67,7 @@ static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
struct mt7615_rate_desc *rate = &wrd->rate;
struct mt7615_sta *sta = wrd->sta;
u32 w5, w27, addr, val;
+ u16 idx = sta->vif->mt76.omac_idx;
lockdep_assert_held(&dev->mt76.mutex);
@@ -118,7 +119,10 @@ static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
sta->rate_probe = sta->rateset[rate->rateset].probe_rate.idx != -1;
- mt76_set(dev, MT_LPON_T0CR, MT_LPON_T0CR_MODE); /* TSF read */
+ idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
+ addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
+
+ mt76_set(dev, addr, MT_LPON_TCR_MODE); /* TSF read */
val = mt76_rr(dev, MT_LPON_UTTR0);
sta->rate_set_tsf = (val & ~BIT(0)) | rate->rateset;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 528/677] mt76: mt7615: fix mib stats counter reporting to mac80211
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (526 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 527/677] mt76: mt7615: fix TSF configuration Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 529/677] mt76: mt7915: " Greg Kroah-Hartman
` (155 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 2eb6f6c437745bce46bd7a8f3a22a732d5b9becb ]
In order to properly report MIB counters to mac80211, resets stats in
mt7615_get_stats routine and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7615_mac_update_mib_stats routine.
Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7615/mac.c | 26 ++++++-------------
.../net/wireless/mediatek/mt76/mt7615/main.c | 6 +++++
.../wireless/mediatek/mt76/mt7615/mt7615.h | 10 +++----
3 files changed, 19 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index e9c341e193f4..f594ea25ece6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1825,10 +1825,8 @@ mt7615_mac_update_mib_stats(struct mt7615_phy *phy)
int i, aggr;
u32 val, val2;
- memset(mib, 0, sizeof(*mib));
-
- mib->fcs_err_cnt = mt76_get_field(dev, MT_MIB_SDR3(ext_phy),
- MT_MIB_SDR3_FCS_ERR_MASK);
+ mib->fcs_err_cnt += mt76_get_field(dev, MT_MIB_SDR3(ext_phy),
+ MT_MIB_SDR3_FCS_ERR_MASK);
val = mt76_get_field(dev, MT_MIB_SDR14(ext_phy),
MT_MIB_AMPDU_MPDU_COUNT);
@@ -1841,24 +1839,16 @@ mt7615_mac_update_mib_stats(struct mt7615_phy *phy)
aggr = ext_phy ? ARRAY_SIZE(dev->mt76.aggr_stats) / 2 : 0;
for (i = 0; i < 4; i++) {
val = mt76_rr(dev, MT_MIB_MB_SDR1(ext_phy, i));
-
- val2 = FIELD_GET(MT_MIB_ACK_FAIL_COUNT_MASK, val);
- if (val2 > mib->ack_fail_cnt)
- mib->ack_fail_cnt = val2;
-
- val2 = FIELD_GET(MT_MIB_BA_MISS_COUNT_MASK, val);
- if (val2 > mib->ba_miss_cnt)
- mib->ba_miss_cnt = val2;
+ mib->ba_miss_cnt += FIELD_GET(MT_MIB_BA_MISS_COUNT_MASK, val);
+ mib->ack_fail_cnt += FIELD_GET(MT_MIB_ACK_FAIL_COUNT_MASK,
+ val);
val = mt76_rr(dev, MT_MIB_MB_SDR0(ext_phy, i));
- val2 = FIELD_GET(MT_MIB_RTS_RETRIES_COUNT_MASK, val);
- if (val2 > mib->rts_retries_cnt) {
- mib->rts_cnt = FIELD_GET(MT_MIB_RTS_COUNT_MASK, val);
- mib->rts_retries_cnt = val2;
- }
+ mib->rts_cnt += FIELD_GET(MT_MIB_RTS_COUNT_MASK, val);
+ mib->rts_retries_cnt += FIELD_GET(MT_MIB_RTS_RETRIES_COUNT_MASK,
+ val);
val = mt76_rr(dev, MT_TX_AGG_CNT(ext_phy, i));
-
dev->mt76.aggr_stats[aggr++] += val & 0xffff;
dev->mt76.aggr_stats[aggr++] += val >> 16;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index ca74575569ae..8263ff81bb7b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -803,11 +803,17 @@ mt7615_get_stats(struct ieee80211_hw *hw,
struct mt7615_phy *phy = mt7615_hw_phy(hw);
struct mib_stats *mib = &phy->mib;
+ mt7615_mutex_acquire(phy->dev);
+
stats->dot11RTSSuccessCount = mib->rts_cnt;
stats->dot11RTSFailureCount = mib->rts_retries_cnt;
stats->dot11FCSErrorCount = mib->fcs_err_cnt;
stats->dot11ACKFailureCount = mib->ack_fail_cnt;
+ memset(mib, 0, sizeof(*mib));
+
+ mt7615_mutex_release(phy->dev);
+
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 491841bc6291..4bc0c379c579 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -133,11 +133,11 @@ struct mt7615_vif {
};
struct mib_stats {
- u16 ack_fail_cnt;
- u16 fcs_err_cnt;
- u16 rts_cnt;
- u16 rts_retries_cnt;
- u16 ba_miss_cnt;
+ u32 ack_fail_cnt;
+ u32 fcs_err_cnt;
+ u32 rts_cnt;
+ u32 rts_retries_cnt;
+ u32 ba_miss_cnt;
unsigned long aggr_per;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 529/677] mt76: mt7915: fix mib stats counter reporting to mac80211
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (527 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 528/677] mt76: mt7615: fix mib stats counter reporting to mac80211 Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 530/677] mt76: connac: fix kernel warning adding monitor interface Greg Kroah-Hartman
` (154 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 2b35050a321865859fd2f12a3c18ed7be27858c9 ]
In order to properly report MIB counters to mac80211, resets stats in
mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7915_mac_update_mib_stats routine.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7915/mac.c | 35 +++++++------------
.../net/wireless/mediatek/mt76/mt7915/main.c | 6 ++++
.../wireless/mediatek/mt76/mt7915/mt7915.h | 10 +++---
3 files changed, 24 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index b79d614aaad9..555274a2f436 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1633,39 +1633,30 @@ mt7915_mac_update_mib_stats(struct mt7915_phy *phy)
bool ext_phy = phy != &dev->phy;
int i, aggr0, aggr1;
- memset(mib, 0, sizeof(*mib));
-
- mib->fcs_err_cnt = mt76_get_field(dev, MT_MIB_SDR3(ext_phy),
- MT_MIB_SDR3_FCS_ERR_MASK);
+ mib->fcs_err_cnt += mt76_get_field(dev, MT_MIB_SDR3(ext_phy),
+ MT_MIB_SDR3_FCS_ERR_MASK);
aggr0 = ext_phy ? ARRAY_SIZE(dev->mt76.aggr_stats) / 2 : 0;
for (i = 0, aggr1 = aggr0 + 4; i < 4; i++) {
- u32 val, val2;
+ u32 val;
val = mt76_rr(dev, MT_MIB_MB_SDR1(ext_phy, i));
-
- val2 = FIELD_GET(MT_MIB_ACK_FAIL_COUNT_MASK, val);
- if (val2 > mib->ack_fail_cnt)
- mib->ack_fail_cnt = val2;
-
- val2 = FIELD_GET(MT_MIB_BA_MISS_COUNT_MASK, val);
- if (val2 > mib->ba_miss_cnt)
- mib->ba_miss_cnt = val2;
+ mib->ba_miss_cnt += FIELD_GET(MT_MIB_BA_MISS_COUNT_MASK, val);
+ mib->ack_fail_cnt +=
+ FIELD_GET(MT_MIB_ACK_FAIL_COUNT_MASK, val);
val = mt76_rr(dev, MT_MIB_MB_SDR0(ext_phy, i));
- val2 = FIELD_GET(MT_MIB_RTS_RETRIES_COUNT_MASK, val);
- if (val2 > mib->rts_retries_cnt) {
- mib->rts_cnt = FIELD_GET(MT_MIB_RTS_COUNT_MASK, val);
- mib->rts_retries_cnt = val2;
- }
+ mib->rts_cnt += FIELD_GET(MT_MIB_RTS_COUNT_MASK, val);
+ mib->rts_retries_cnt +=
+ FIELD_GET(MT_MIB_RTS_RETRIES_COUNT_MASK, val);
val = mt76_rr(dev, MT_TX_AGG_CNT(ext_phy, i));
- val2 = mt76_rr(dev, MT_TX_AGG_CNT2(ext_phy, i));
-
dev->mt76.aggr_stats[aggr0++] += val & 0xffff;
dev->mt76.aggr_stats[aggr0++] += val >> 16;
- dev->mt76.aggr_stats[aggr1++] += val2 & 0xffff;
- dev->mt76.aggr_stats[aggr1++] += val2 >> 16;
+
+ val = mt76_rr(dev, MT_TX_AGG_CNT2(ext_phy, i));
+ dev->mt76.aggr_stats[aggr1++] += val & 0xffff;
+ dev->mt76.aggr_stats[aggr1++] += val >> 16;
}
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index d4969b2e1ffb..8c1bf397fd25 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -717,13 +717,19 @@ mt7915_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct mt7915_phy *phy = mt7915_hw_phy(hw);
+ struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mib_stats *mib = &phy->mib;
+ mutex_lock(&dev->mt76.mutex);
stats->dot11RTSSuccessCount = mib->rts_cnt;
stats->dot11RTSFailureCount = mib->rts_retries_cnt;
stats->dot11FCSErrorCount = mib->fcs_err_cnt;
stats->dot11ACKFailureCount = mib->ack_fail_cnt;
+ memset(mib, 0, sizeof(*mib));
+
+ mutex_unlock(&dev->mt76.mutex);
+
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 5c7eefdf2013..1160d1bf8a7c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -108,11 +108,11 @@ struct mt7915_vif {
};
struct mib_stats {
- u16 ack_fail_cnt;
- u16 fcs_err_cnt;
- u16 rts_cnt;
- u16 rts_retries_cnt;
- u16 ba_miss_cnt;
+ u32 ack_fail_cnt;
+ u32 fcs_err_cnt;
+ u32 rts_cnt;
+ u32 rts_retries_cnt;
+ u32 ba_miss_cnt;
};
struct mt7915_hif {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 530/677] mt76: connac: fix kernel warning adding monitor interface
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (528 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 529/677] mt76: mt7915: " Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 531/677] mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list Greg Kroah-Hartman
` (153 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit c996f0346e40e3b1ac2ebaf0681df898fb157f60 ]
Fix the following kernel warning adding a monitor interface in
mt76_connac_mcu_uni_add_dev routine.
[ 507.984882] ------------[ cut here ]------------
[ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0
[ 508.065461] Hardware name: MT7622_MT7531 RFB (DT)
[ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[ 508.087367] sp : ffffffc013a33930
[ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0
[ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008
[ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610
[ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8
[ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8
[ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000
[ 508.122482] x17: 00000000ffffffff x16: 0000000000000000
[ 508.127785] x15: 0000000000000080 x14: ffffff801d704000
[ 508.133087] x13: 0000000000000040 x12: 0000000000000002
[ 508.138389] x11: 000000000000000c x10: 0000000000000000
[ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001
[ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000
[ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006
[ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000
[ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0
[ 508.170200] Call trace:
[ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[ 508.184394] drv_add_interface+0x34/0x88 [mac80211]
[ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211]
[ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211]
[ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211]
[ 508.205372] __dev_open+0xcc/0x150
[ 508.208763] __dev_change_flags+0x134/0x198
[ 508.212937] dev_change_flags+0x20/0x60
[ 508.216764] devinet_ioctl+0x3e8/0x748
[ 508.220503] inet_ioctl+0x1e4/0x350
[ 508.223983] sock_do_ioctl+0x48/0x2a0
[ 508.227635] sock_ioctl+0x310/0x4f8
[ 508.231116] do_vfs_ioctl+0xa4/0xac0
[ 508.234681] ksys_ioctl+0x44/0x90
[ 508.237985] __arm64_sys_ioctl+0x1c/0x48
[ 508.241901] el0_svc_common.constprop.1+0x7c/0x100
[ 508.246681] el0_svc_handler+0x18/0x20
[ 508.250421] el0_svc+0x8/0x1c8
[ 508.253465] ---[ end trace c7b90fee13d72c39 ]---
[ 508.261278] ------------[ cut here ]------------
Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 4356bf130dbd..8e9e42b77692 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -946,6 +946,7 @@ int mt76_connac_mcu_uni_add_dev(struct mt76_phy *phy,
switch (vif->type) {
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP:
basic_req.basic.conn_type = cpu_to_le32(CONNECTION_INFRA_AP);
break;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 531/677] mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (529 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 530/677] mt76: connac: fix kernel warning adding monitor interface Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 532/677] mt76: mt7921: fix the base of PCIe interrupt Greg Kroah-Hartman
` (152 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 57b8b57516c5108b0078051a31c68dc9dfcbf68f ]
Since mt76_txq_send_burst routine can report a negative error code,
check the returned value before incrementing the number of transmitted
frames in mt76_txq_schedule_list routine.
Return -EBUSY directly if the device is in reset or in power management.
Fixes: 90fdc1717b186 ("mt76: use mac80211 txq scheduling")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/tx.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index b8fe8adc43a3..451ed60c6296 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -461,11 +461,11 @@ mt76_txq_schedule_list(struct mt76_phy *phy, enum mt76_txq_id qid)
int ret = 0;
while (1) {
+ int n_frames = 0;
+
if (test_bit(MT76_STATE_PM, &phy->state) ||
- test_bit(MT76_RESET, &phy->state)) {
- ret = -EBUSY;
- break;
- }
+ test_bit(MT76_RESET, &phy->state))
+ return -EBUSY;
if (dev->queue_ops->tx_cleanup &&
q->queued + 2 * MT_TXQ_FREE_THR >= q->ndesc) {
@@ -497,11 +497,16 @@ mt76_txq_schedule_list(struct mt76_phy *phy, enum mt76_txq_id qid)
}
if (!mt76_txq_stopped(q))
- ret += mt76_txq_send_burst(phy, q, mtxq);
+ n_frames = mt76_txq_send_burst(phy, q, mtxq);
spin_unlock_bh(&q->lock);
ieee80211_return_txq(phy->hw, txq, false);
+
+ if (unlikely(n_frames < 0))
+ return n_frames;
+
+ ret += n_frames;
}
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 532/677] mt76: mt7921: fix the base of PCIe interrupt
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (530 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 531/677] mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 533/677] mt76: mt7921: fix the base of the dynamic remap Greg Kroah-Hartman
` (151 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, YN Chen, Sean Wang, Lorenzo Bianconi,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 23c1d2dc9ed5be1d0df7987335f5646e3826a461 ]
Should use 0x10000 as the base to operate PCIe interrupt according
to the vendor reference driver.
Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 4 ++--
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index c747022f7642..0262bd8b1626 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -137,7 +137,7 @@ static int mt7921_pci_probe(struct pci_dev *pdev,
mt76_wr(dev, MT_WFDMA0_HOST_INT_ENA, 0);
- mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+ mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
ret = devm_request_irq(mdev->dev, pdev->irq, mt7921_irq_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
@@ -248,7 +248,7 @@ static int mt7921_pci_resume(struct pci_dev *pdev)
return err;
/* enable interrupt */
- mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+ mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
mt7921_irq_enable(dev, MT_INT_RX_DONE_ALL | MT_INT_TX_DONE_ALL |
MT_INT_MCU_CMD);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 2dd2e628b776..e7bb918446ee 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -389,7 +389,7 @@
#define MT_HW_CHIPID 0x70010200
#define MT_HW_REV 0x70010204
-#define MT_PCIE_MAC_BASE 0x74030000
+#define MT_PCIE_MAC_BASE 0x10000
#define MT_PCIE_MAC(ofs) (MT_PCIE_MAC_BASE + (ofs))
#define MT_PCIE_MAC_INT_ENABLE MT_PCIE_MAC(0x188)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 533/677] mt76: mt7921: fix the base of the dynamic remap
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (531 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 532/677] mt76: mt7921: fix the base of PCIe interrupt Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 534/677] mt76: mt7915: fix rxrate reporting Greg Kroah-Hartman
` (150 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, YN Chen, Sean Wang, Felix Fietkau,
Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 53a8fb4afdc877f8f2d5e1e15cc5ad66155987a6 ]
We should change the base for the dynamic remap into another one, because
the current base (0xe0000) have been the one used to operate the device
ownership.
Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index e7bb918446ee..73878d3e2495 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -362,11 +362,11 @@
#define MT_INFRA_CFG_BASE 0xfe000
#define MT_INFRA(ofs) (MT_INFRA_CFG_BASE + (ofs))
-#define MT_HIF_REMAP_L1 MT_INFRA(0x260)
+#define MT_HIF_REMAP_L1 MT_INFRA(0x24c)
#define MT_HIF_REMAP_L1_MASK GENMASK(15, 0)
#define MT_HIF_REMAP_L1_OFFSET GENMASK(15, 0)
#define MT_HIF_REMAP_L1_BASE GENMASK(31, 16)
-#define MT_HIF_REMAP_BASE_L1 0xe0000
+#define MT_HIF_REMAP_BASE_L1 0x40000
#define MT_SWDEF_BASE 0x41f200
#define MT_SWDEF(ofs) (MT_SWDEF_BASE + (ofs))
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 534/677] mt76: mt7915: fix rxrate reporting
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (532 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 533/677] mt76: mt7921: fix the base of the dynamic remap Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 535/677] mt76: mt7915: fix txrate reporting Greg Kroah-Hartman
` (149 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 7883906d22c1e73f1f316bd84fc4a7ff8edd12aa ]
Avoid directly updating sinfo->rxrate from firmware since rate_info might
be overwritten by wrong results even mt7915_mcu_get_rx_rate() fails check.
Add more error handlings accordingly.
Fixes: 11553d88d0b9 ("mt76: mt7915: query station rx rate from firmware")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7915/main.c | 5 +-
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 47 ++++++++++---------
2 files changed, 30 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 8c1bf397fd25..98f4b49642a8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -839,9 +839,12 @@ static void mt7915_sta_statistics(struct ieee80211_hw *hw,
struct mt7915_phy *phy = mt7915_hw_phy(hw);
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
struct mt7915_sta_stats *stats = &msta->stats;
+ struct rate_info rxrate = {};
- if (mt7915_mcu_get_rx_rate(phy, vif, sta, &sinfo->rxrate) == 0)
+ if (!mt7915_mcu_get_rx_rate(phy, vif, sta, &rxrate)) {
+ sinfo->rxrate = rxrate;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_BITRATE);
+ }
if (!stats->tx_rate.legacy && !stats->tx_rate.flags)
return;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 195929242b72..ca3e7a9bbcb6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3501,9 +3501,8 @@ int mt7915_mcu_get_rx_rate(struct mt7915_phy *phy, struct ieee80211_vif *vif,
struct ieee80211_supported_band *sband;
struct mt7915_mcu_phy_rx_info *res;
struct sk_buff *skb;
- u16 flags = 0;
int ret;
- int i;
+ bool cck = false;
ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_EXT_CMD(PHY_STAT_INFO),
&req, sizeof(req), true, &skb);
@@ -3517,48 +3516,53 @@ int mt7915_mcu_get_rx_rate(struct mt7915_phy *phy, struct ieee80211_vif *vif,
switch (res->mode) {
case MT_PHY_TYPE_CCK:
+ cck = true;
+ fallthrough;
case MT_PHY_TYPE_OFDM:
if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
sband = &mphy->sband_5g.sband;
else
sband = &mphy->sband_2g.sband;
- for (i = 0; i < sband->n_bitrates; i++) {
- if (rate->mcs != (sband->bitrates[i].hw_value & 0xf))
- continue;
-
- rate->legacy = sband->bitrates[i].bitrate;
- break;
- }
+ rate->mcs = mt76_get_rate(&dev->mt76, sband, rate->mcs, cck);
+ rate->legacy = sband->bitrates[rate->mcs].bitrate;
break;
case MT_PHY_TYPE_HT:
case MT_PHY_TYPE_HT_GF:
- if (rate->mcs > 31)
- return -EINVAL;
-
- flags |= RATE_INFO_FLAGS_MCS;
+ if (rate->mcs > 31) {
+ ret = -EINVAL;
+ goto out;
+ }
+ rate->flags = RATE_INFO_FLAGS_MCS;
if (res->gi)
- flags |= RATE_INFO_FLAGS_SHORT_GI;
+ rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
break;
case MT_PHY_TYPE_VHT:
- flags |= RATE_INFO_FLAGS_VHT_MCS;
+ if (rate->mcs > 9) {
+ ret = -EINVAL;
+ goto out;
+ }
+ rate->flags = RATE_INFO_FLAGS_VHT_MCS;
if (res->gi)
- flags |= RATE_INFO_FLAGS_SHORT_GI;
+ rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
break;
case MT_PHY_TYPE_HE_SU:
case MT_PHY_TYPE_HE_EXT_SU:
case MT_PHY_TYPE_HE_TB:
case MT_PHY_TYPE_HE_MU:
+ if (res->gi > NL80211_RATE_INFO_HE_GI_3_2 || rate->mcs > 11) {
+ ret = -EINVAL;
+ goto out;
+ }
rate->he_gi = res->gi;
-
- flags |= RATE_INFO_FLAGS_HE_MCS;
+ rate->flags = RATE_INFO_FLAGS_HE_MCS;
break;
default:
- break;
+ ret = -EINVAL;
+ goto out;
}
- rate->flags = flags;
switch (res->bw) {
case IEEE80211_STA_RX_BW_160:
@@ -3575,7 +3579,8 @@ int mt7915_mcu_get_rx_rate(struct mt7915_phy *phy, struct ieee80211_vif *vif,
break;
}
+out:
dev_kfree_skb(skb);
- return 0;
+ return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 535/677] mt76: mt7915: fix txrate reporting
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (533 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 534/677] mt76: mt7915: fix rxrate reporting Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 536/677] mt76: mt7663: fix when beacon filter is being applied Greg Kroah-Hartman
` (148 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Evelyn Tsai, Ryder Lee,
Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit f43b941fd61003659a3f0e039595e5e525917aa8 ]
Properly check rate_info to fix unexpected reporting.
[ 1215.161863] Call trace:
[ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211]
[ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211]
[ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211]
[ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e]
[ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e]
[ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e]
[ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76]
[ 1215.201276] __napi_poll+0x38/0xf8
[ 1215.204668] napi_workfn+0x40/0x80
[ 1215.208062] process_one_work+0x1fc/0x390
[ 1215.212062] worker_thread+0x48/0x4d0
[ 1215.215715] kthread+0x120/0x128
[ 1215.218935] ret_from_fork+0x10/0x1c
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: e4c5ead632ff ("mt76: mt7915: rename mt7915_mcu_get_rate_info to mt7915_mcu_get_tx_rate")
Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 38 ++++++++++++-------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index ca3e7a9bbcb6..443cb09ae7cb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -351,54 +351,62 @@ mt7915_mcu_rx_radar_detected(struct mt7915_dev *dev, struct sk_buff *skb)
dev->hw_pattern++;
}
-static void
+static int
mt7915_mcu_tx_rate_parse(struct mt76_phy *mphy, struct mt7915_mcu_ra_info *ra,
struct rate_info *rate, u16 r)
{
struct ieee80211_supported_band *sband;
u16 ru_idx = le16_to_cpu(ra->ru_idx);
- u16 flags = 0;
+ bool cck = false;
rate->mcs = FIELD_GET(MT_RA_RATE_MCS, r);
rate->nss = FIELD_GET(MT_RA_RATE_NSS, r) + 1;
switch (FIELD_GET(MT_RA_RATE_TX_MODE, r)) {
case MT_PHY_TYPE_CCK:
+ cck = true;
+ fallthrough;
case MT_PHY_TYPE_OFDM:
if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
sband = &mphy->sband_5g.sband;
else
sband = &mphy->sband_2g.sband;
+ rate->mcs = mt76_get_rate(mphy->dev, sband, rate->mcs, cck);
rate->legacy = sband->bitrates[rate->mcs].bitrate;
break;
case MT_PHY_TYPE_HT:
case MT_PHY_TYPE_HT_GF:
rate->mcs += (rate->nss - 1) * 8;
- flags |= RATE_INFO_FLAGS_MCS;
+ if (rate->mcs > 31)
+ return -EINVAL;
+ rate->flags = RATE_INFO_FLAGS_MCS;
if (ra->gi)
- flags |= RATE_INFO_FLAGS_SHORT_GI;
+ rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
break;
case MT_PHY_TYPE_VHT:
- flags |= RATE_INFO_FLAGS_VHT_MCS;
+ if (rate->mcs > 9)
+ return -EINVAL;
+ rate->flags = RATE_INFO_FLAGS_VHT_MCS;
if (ra->gi)
- flags |= RATE_INFO_FLAGS_SHORT_GI;
+ rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
break;
case MT_PHY_TYPE_HE_SU:
case MT_PHY_TYPE_HE_EXT_SU:
case MT_PHY_TYPE_HE_TB:
case MT_PHY_TYPE_HE_MU:
+ if (ra->gi > NL80211_RATE_INFO_HE_GI_3_2 || rate->mcs > 11)
+ return -EINVAL;
+
rate->he_gi = ra->gi;
rate->he_dcm = FIELD_GET(MT_RA_RATE_DCM_EN, r);
-
- flags |= RATE_INFO_FLAGS_HE_MCS;
+ rate->flags = RATE_INFO_FLAGS_HE_MCS;
break;
default:
- break;
+ return -EINVAL;
}
- rate->flags = flags;
if (ru_idx) {
switch (ru_idx) {
@@ -435,6 +443,8 @@ mt7915_mcu_tx_rate_parse(struct mt76_phy *mphy, struct mt7915_mcu_ra_info *ra,
break;
}
}
+
+ return 0;
}
static void
@@ -465,12 +475,12 @@ mt7915_mcu_tx_rate_report(struct mt7915_dev *dev, struct sk_buff *skb)
mphy = dev->mt76.phy2;
/* current rate */
- mt7915_mcu_tx_rate_parse(mphy, ra, &rate, curr);
- stats->tx_rate = rate;
+ if (!mt7915_mcu_tx_rate_parse(mphy, ra, &rate, curr))
+ stats->tx_rate = rate;
/* probing rate */
- mt7915_mcu_tx_rate_parse(mphy, ra, &prob_rate, probe);
- stats->prob_rate = prob_rate;
+ if (!mt7915_mcu_tx_rate_parse(mphy, ra, &prob_rate, probe))
+ stats->prob_rate = prob_rate;
if (attempts) {
u16 success = le16_to_cpu(ra->success);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 536/677] mt76: mt7663: fix when beacon filter is being applied
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (534 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 535/677] mt76: mt7915: fix txrate reporting Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 537/677] mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation Greg Kroah-Hartman
` (147 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 4bec61d9fb9629c21e60cd24a97235ea1f6020ec ]
HW beacon filter command is being applied until we're in associated state
because the command would rely on the associated access point's beacon
interval and DTIM information.
Fixes: 7124198ab1a4 ("mt76: mt7615: enable beacon filtering by default for offload fw")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 8263ff81bb7b..6107e827b383 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -217,8 +217,6 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
ret = mt7615_mcu_add_dev_info(phy, vif, true);
if (ret)
goto out;
-
- mt7615_mac_set_beacon_filter(phy, vif, true);
out:
mt7615_mutex_release(dev);
@@ -244,7 +242,6 @@ static void mt7615_remove_interface(struct ieee80211_hw *hw,
mt76_connac_free_pending_tx_skbs(&dev->pm, &msta->wcid);
- mt7615_mac_set_beacon_filter(phy, vif, false);
mt7615_mcu_add_dev_info(phy, vif, false);
rcu_assign_pointer(dev->mt76.wcid[idx], NULL);
@@ -544,6 +541,9 @@ static void mt7615_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_ARP_FILTER)
mt7615_mcu_update_arp_filter(hw, vif, info);
+ if (changed & BSS_CHANGED_ASSOC)
+ mt7615_mac_set_beacon_filter(phy, vif, info->assoc);
+
mt7615_mutex_release(dev);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 537/677] mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (535 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 536/677] mt76: mt7663: fix when beacon filter is being applied Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 538/677] mt76: mt7663s: fix the possible device hang in high traffic Greg Kroah-Hartman
` (146 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 455ae5aabcc72fed7e5c803d59d122415500dc08 ]
Each packet should be padded with the additional zero to become 4-bytes
alignment in sdio tx aggregation.
Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
index 9fb506f2ace6..37fe65ced4fd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
@@ -218,6 +218,7 @@ static int mt7663s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
int qid, err, nframes = 0, len = 0, pse_sz = 0, ple_sz = 0;
bool mcu = q == dev->q_mcu[MT_MCUQ_WM];
struct mt76_sdio *sdio = &dev->sdio;
+ u8 pad;
qid = mcu ? ARRAY_SIZE(sdio->xmit_buf) - 1 : q->qid;
while (q->first != q->head) {
@@ -234,7 +235,8 @@ static int mt7663s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
goto next;
}
- if (len + e->skb->len + 4 > MT76S_XMIT_BUF_SZ)
+ pad = roundup(e->skb->len, 4) - e->skb->len;
+ if (len + e->skb->len + pad + 4 > MT76S_XMIT_BUF_SZ)
break;
if (mt7663s_tx_pick_quota(sdio, mcu, e->buf_sz, &pse_sz,
@@ -252,6 +254,11 @@ static int mt7663s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
len += iter->len;
nframes++;
}
+
+ if (unlikely(pad)) {
+ memset(sdio->xmit_buf[qid] + len, 0, pad);
+ len += pad;
+ }
next:
q->first = (q->first + 1) % q->ndesc;
e->done = true;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 538/677] mt76: mt7663s: fix the possible device hang in high traffic
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (536 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 537/677] mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 539/677] mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset() Greg Kroah-Hartman
` (145 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 45247a85614b49b07b9dc59a4e6783b17e766ff2 ]
Use the additional memory barrier to ensure the skb list up-to-date
between the skb producer and consumer to avoid the invalid skb content
written into sdio controller and then cause device hang due to mcu assert
caught by WR_TIMEOUT_INT.
Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c | 2 ++
drivers/net/wireless/mediatek/mt76/sdio.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
index 37fe65ced4fd..4393dd21ebbb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c
@@ -225,6 +225,8 @@ static int mt7663s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
struct mt76_queue_entry *e = &q->entry[q->first];
struct sk_buff *iter;
+ smp_rmb();
+
if (!test_bit(MT76_STATE_MCU_RUNNING, &dev->phy.state)) {
__skb_put_zero(e->skb, 4);
err = __mt7663s_xmit_queue(dev, e->skb->data,
diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c b/drivers/net/wireless/mediatek/mt76/sdio.c
index 0b6facb17ff7..a18d2896ee1f 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio.c
@@ -256,6 +256,9 @@ mt76s_tx_queue_skb(struct mt76_dev *dev, struct mt76_queue *q,
q->entry[q->head].skb = tx_info.skb;
q->entry[q->head].buf_sz = len;
+
+ smp_wmb();
+
q->head = (q->head + 1) % q->ndesc;
q->queued++;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 539/677] mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (537 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 538/677] mt76: mt7663s: fix the possible device hang in high traffic Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 540/677] mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset() Greg Kroah-Hartman
` (144 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 69e74d7f23d515fb559b2e0bebfdf4c458d9507d ]
With this patch, mt7615_mac_reset_work() can recover system back.
Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index f594ea25ece6..d73841480544 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1970,15 +1970,17 @@ void mt7615_dma_reset(struct mt7615_dev *dev)
mt76_clear(dev, MT_WPDMA_GLO_CFG,
MT_WPDMA_GLO_CFG_RX_DMA_EN | MT_WPDMA_GLO_CFG_TX_DMA_EN |
MT_WPDMA_GLO_CFG_TX_WRITEBACK_DONE);
+
usleep_range(1000, 2000);
- mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_WM], true);
for (i = 0; i < __MT_TXQ_MAX; i++)
mt76_queue_tx_cleanup(dev, dev->mphy.q_tx[i], true);
- mt76_for_each_q_rx(&dev->mt76, i) {
+ for (i = 0; i < __MT_MCUQ_MAX; i++)
+ mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[i], true);
+
+ mt76_for_each_q_rx(&dev->mt76, i)
mt76_queue_rx_reset(dev, i);
- }
mt76_set(dev, MT_WPDMA_GLO_CFG,
MT_WPDMA_GLO_CFG_RX_DMA_EN | MT_WPDMA_GLO_CFG_TX_DMA_EN |
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 540/677] mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (538 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 539/677] mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 541/677] mt76: mt7921: always wake the device in mt7921_remove_interface Greg Kroah-Hartman
` (143 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 1ebea45ef027ee31cd50ed92903071391e792edb ]
Cleanup mcu queues in mt7915_mac_reset_work().
Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 555274a2f436..819670767521 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1470,9 +1470,8 @@ mt7915_update_beacons(struct mt7915_dev *dev)
}
static void
-mt7915_dma_reset(struct mt7915_phy *phy)
+mt7915_dma_reset(struct mt7915_dev *dev)
{
- struct mt7915_dev *dev = phy->dev;
struct mt76_phy *mphy_ext = dev->mt76.phy2;
u32 hif1_ofs = MT_WFDMA1_PCIE1_BASE - MT_WFDMA1_BASE;
int i;
@@ -1489,18 +1488,20 @@ mt7915_dma_reset(struct mt7915_phy *phy)
(MT_WFDMA1_GLO_CFG_TX_DMA_EN |
MT_WFDMA1_GLO_CFG_RX_DMA_EN));
}
+
usleep_range(1000, 2000);
- mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_WA], true);
for (i = 0; i < __MT_TXQ_MAX; i++) {
- mt76_queue_tx_cleanup(dev, phy->mt76->q_tx[i], true);
+ mt76_queue_tx_cleanup(dev, dev->mphy.q_tx[i], true);
if (mphy_ext)
mt76_queue_tx_cleanup(dev, mphy_ext->q_tx[i], true);
}
- mt76_for_each_q_rx(&dev->mt76, i) {
+ for (i = 0; i < __MT_MCUQ_MAX; i++)
+ mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[i], true);
+
+ mt76_for_each_q_rx(&dev->mt76, i)
mt76_queue_rx_reset(dev, i);
- }
/* re-init prefetch settings after reset */
mt7915_dma_prefetch(dev);
@@ -1584,7 +1585,7 @@ void mt7915_mac_reset_work(struct work_struct *work)
idr_init(&dev->token);
if (mt7915_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
- mt7915_dma_reset(&dev->phy);
+ mt7915_dma_reset(dev);
mt76_wr(dev, MT_MCU_INT_EVENT, MT_MCU_INT_EVENT_DMA_INIT);
mt7915_wait_reset_state(dev, MT_MCU_CMD_RECOVERY_DONE);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 541/677] mt76: mt7921: always wake the device in mt7921_remove_interface
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (539 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 540/677] mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 542/677] mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton Greg Kroah-Hartman
` (142 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Leon Yen,
Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 859c85fd19715349ce01539459095fd5fc7e483a ]
Make sure the mcu is not in sleep mode before sending mcu messages in
mt7921_remove_interface routine.
Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 3566059e5704..166c9c0eb5fd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -348,6 +348,7 @@ static void mt7921_remove_interface(struct ieee80211_hw *hw,
if (vif == phy->monitor_vif)
phy->monitor_vif = NULL;
+ mt7921_mutex_acquire(dev);
mt76_connac_free_pending_tx_skbs(&dev->pm, &msta->wcid);
if (dev->pm.enable) {
@@ -360,7 +361,6 @@ static void mt7921_remove_interface(struct ieee80211_hw *hw,
rcu_assign_pointer(dev->mt76.wcid[idx], NULL);
- mt7921_mutex_acquire(dev);
dev->mt76.vif_mask &= ~BIT(mvif->mt76.idx);
phy->omac_mask &= ~BIT_ULL(mvif->mt76.omac_idx);
mt7921_mutex_release(dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 542/677] mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (540 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 541/677] mt76: mt7921: always wake the device in mt7921_remove_interface Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 543/677] mt76: mt7921: fix the dwell time control Greg Kroah-Hartman
` (141 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 9c9d83213424679b087267600d53a35acfa0201f ]
Fix the Wake-on-WoWLAN failure should rely on ARP Information is being
updated in time to the firmware.
Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/mediatek/mt76/mt7921/main.c | 3 ++
.../net/wireless/mediatek/mt76/mt7921/mcu.c | 44 +++++++++++++++++++
.../wireless/mediatek/mt76/mt7921/mt7921.h | 3 ++
3 files changed, 50 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 166c9c0eb5fd..cd9fd0e24e3e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -587,6 +587,9 @@ static void mt7921_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_PS)
mt7921_mcu_uni_bss_ps(dev, vif);
+ if (changed & BSS_CHANGED_ARP_FILTER)
+ mt7921_mcu_update_arp_filter(hw, vif, info);
+
mt7921_mutex_release(dev);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index b5cc72e7e81c..62afbad77596 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -1304,3 +1304,47 @@ mt7921_pm_interface_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
mt76_clear(dev, MT_WF_RFCR(0), MT_WF_RFCR_DROP_OTHER_BEACON);
}
}
+
+int mt7921_mcu_update_arp_filter(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info)
+{
+ struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
+ struct mt7921_dev *dev = mt7921_hw_dev(hw);
+ struct sk_buff *skb;
+ int i, len = min_t(int, info->arp_addr_cnt,
+ IEEE80211_BSS_ARP_ADDR_LIST_LEN);
+ struct {
+ struct {
+ u8 bss_idx;
+ u8 pad[3];
+ } __packed hdr;
+ struct mt76_connac_arpns_tlv arp;
+ } req_hdr = {
+ .hdr = {
+ .bss_idx = mvif->mt76.idx,
+ },
+ .arp = {
+ .tag = cpu_to_le16(UNI_OFFLOAD_OFFLOAD_ARP),
+ .len = cpu_to_le16(sizeof(struct mt76_connac_arpns_tlv)),
+ .ips_num = len,
+ .mode = 2, /* update */
+ .option = 1,
+ },
+ };
+
+ skb = mt76_mcu_msg_alloc(&dev->mt76, NULL,
+ sizeof(req_hdr) + len * sizeof(__be32));
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put_data(skb, &req_hdr, sizeof(req_hdr));
+ for (i = 0; i < len; i++) {
+ u8 *addr = (u8 *)skb_put(skb, sizeof(__be32));
+
+ memcpy(addr, &info->arp_addr_list[i], sizeof(__be32));
+ }
+
+ return mt76_mcu_skb_send_msg(&dev->mt76, skb, MCU_UNI_CMD_OFFLOAD,
+ true);
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
index 2979d06ee0ad..25a1a6acb6ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
@@ -339,4 +339,7 @@ int mt7921_mac_set_beacon_filter(struct mt7921_phy *phy,
bool enable);
void mt7921_pm_interface_iter(void *priv, u8 *mac, struct ieee80211_vif *vif);
void mt7921_coredump_work(struct work_struct *work);
+int mt7921_mcu_update_arp_filter(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info);
#endif
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 543/677] mt76: mt7921: fix the dwell time control
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (541 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 542/677] mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 544/677] KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit Greg Kroah-Hartman
` (140 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Soul Huang, YN Chen, Sean Wang,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit 9db419f0cb39a63fb2f645a846cae17b81cd5c96 ]
dwell time for the scan is not configurable according to the current
firmware submitted into linux-firmware.git, so leave the dwell time 0 to
indicate the dwell time always determined by the firmware.
Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module")
Suggested-by: Soul Huang <Soul.Huang@mediatek.com>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 8e9e42b77692..76a61e8b7fb9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -1309,7 +1309,7 @@ int mt76_connac_mcu_hw_scan(struct mt76_phy *phy, struct ieee80211_vif *vif,
{
struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
struct cfg80211_scan_request *sreq = &scan_req->req;
- int n_ssids = 0, err, i, duration = MT76_CONNAC_SCAN_CHANNEL_TIME;
+ int n_ssids = 0, err, i, duration;
int ext_channels_num = max_t(int, sreq->n_channels - 32, 0);
struct ieee80211_channel **scan_list = sreq->channels;
struct mt76_dev *mdev = phy->dev;
@@ -1346,6 +1346,7 @@ int mt76_connac_mcu_hw_scan(struct mt76_phy *phy, struct ieee80211_vif *vif,
req->ssid_type_ext = n_ssids ? BIT(0) : 0;
req->ssids_num = n_ssids;
+ duration = is_mt7921(phy->dev) ? 0 : MT76_CONNAC_SCAN_CHANNEL_TIME;
/* increase channel time for passive scan */
if (!sreq->n_ssids)
duration *= 2;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 544/677] KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (542 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 543/677] mt76: mt7921: fix the dwell time control Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 545/677] ovl: show "userxattr" in the mount data Greg Kroah-Hartman
` (139 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Piggin, Michael Ellerman,
Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 5088eb4092df12d701af8e0e92860b7186365279 ]
The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.
This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.
There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.
Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kvm/book3s_hv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 13bad6bf4c95..208a053c9adf 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3728,7 +3728,10 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
vcpu->arch.dec_expires = dec + tb;
vcpu->cpu = -1;
vcpu->arch.thread_cpu = -1;
+ /* Save guest CTRL register, set runlatch to 1 */
vcpu->arch.ctrl = mfspr(SPRN_CTRLF);
+ if (!(vcpu->arch.ctrl & 1))
+ mtspr(SPRN_CTRLT, vcpu->arch.ctrl | 1);
vcpu->arch.iamr = mfspr(SPRN_IAMR);
vcpu->arch.pspb = mfspr(SPRN_PSPB);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 545/677] ovl: show "userxattr" in the mount data
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (543 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 544/677] KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 546/677] ovl: invalidate readdir cache on changes to dir with origin Greg Kroah-Hartman
` (138 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giuseppe Scrivano, Vivek Goyal,
Miklos Szeredi, Sasha Levin
From: Giuseppe Scrivano <gscrivan@redhat.com>
[ Upstream commit 321b46b904816241044e177c1d6282ad20f17416 ]
This was missed when adding the option.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: 2d2f2d7322ff ("ovl: user xattr")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/super.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 8cf343335029..787ce7c38fba 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -380,6 +380,8 @@ static int ovl_show_options(struct seq_file *m, struct dentry *dentry)
ofs->config.metacopy ? "on" : "off");
if (ofs->config.ovl_volatile)
seq_puts(m, ",volatile");
+ if (ofs->config.userxattr)
+ seq_puts(m, ",userxattr");
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 546/677] ovl: invalidate readdir cache on changes to dir with origin
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (544 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 545/677] ovl: show "userxattr" in the mount data Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 547/677] RDMA/qedr: Fix error return code in qedr_iw_connect() Greg Kroah-Hartman
` (137 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Murphy, Amir Goldstein,
Miklos Szeredi, Sasha Levin
From: Amir Goldstein <amir73il@gmail.com>
[ Upstream commit 65cd913ec9d9d71529665924c81015b7ab7d9381 ]
The test in ovl_dentry_version_inc() was out-dated and did not include
the case where readdir cache is used on a non-merge dir that has origin
xattr, indicating that it may contain leftover whiteouts.
To make the code more robust, use the same helper ovl_dir_is_real()
to determine if readdir cache should be used and if readdir cache should
be invalidated.
Fixes: b79e05aaa166 ("ovl: no direct iteration for dir with origin xattr")
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxht70nODhNHNwGFMSqDyOKLXOKrY0H6g849os4BQ7cokA@mail.gmail.com/
Cc: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/overlayfs/overlayfs.h | 30 +++++++++++++++++++++++++++---
fs/overlayfs/readdir.c | 12 ------------
fs/overlayfs/util.c | 31 +++++++++----------------------
3 files changed, 36 insertions(+), 37 deletions(-)
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 95cff83786a5..2322f854533c 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -319,9 +319,6 @@ int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry,
enum ovl_xattr ox, const void *value, size_t size,
int xerr);
int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry);
-void ovl_set_flag(unsigned long flag, struct inode *inode);
-void ovl_clear_flag(unsigned long flag, struct inode *inode);
-bool ovl_test_flag(unsigned long flag, struct inode *inode);
bool ovl_inuse_trylock(struct dentry *dentry);
void ovl_inuse_unlock(struct dentry *dentry);
bool ovl_is_inuse(struct dentry *dentry);
@@ -335,6 +332,21 @@ char *ovl_get_redirect_xattr(struct ovl_fs *ofs, struct dentry *dentry,
int padding);
int ovl_sync_status(struct ovl_fs *ofs);
+static inline void ovl_set_flag(unsigned long flag, struct inode *inode)
+{
+ set_bit(flag, &OVL_I(inode)->flags);
+}
+
+static inline void ovl_clear_flag(unsigned long flag, struct inode *inode)
+{
+ clear_bit(flag, &OVL_I(inode)->flags);
+}
+
+static inline bool ovl_test_flag(unsigned long flag, struct inode *inode)
+{
+ return test_bit(flag, &OVL_I(inode)->flags);
+}
+
static inline bool ovl_is_impuredir(struct super_block *sb,
struct dentry *dentry)
{
@@ -439,6 +451,18 @@ int ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
struct dentry *dentry, int level);
int ovl_indexdir_cleanup(struct ovl_fs *ofs);
+/*
+ * Can we iterate real dir directly?
+ *
+ * Non-merge dir may contain whiteouts from a time it was a merge upper, before
+ * lower dir was removed under it and possibly before it was rotated from upper
+ * to lower layer.
+ */
+static inline bool ovl_dir_is_real(struct dentry *dir)
+{
+ return !ovl_test_flag(OVL_WHITEOUTS, d_inode(dir));
+}
+
/* inode.c */
int ovl_set_nlink_upper(struct dentry *dentry);
int ovl_set_nlink_lower(struct dentry *dentry);
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index f404a78e6b60..cc1e80257064 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -319,18 +319,6 @@ static inline int ovl_dir_read(struct path *realpath,
return err;
}
-/*
- * Can we iterate real dir directly?
- *
- * Non-merge dir may contain whiteouts from a time it was a merge upper, before
- * lower dir was removed under it and possibly before it was rotated from upper
- * to lower layer.
- */
-static bool ovl_dir_is_real(struct dentry *dir)
-{
- return !ovl_test_flag(OVL_WHITEOUTS, d_inode(dir));
-}
-
static void ovl_dir_reset(struct file *file)
{
struct ovl_dir_file *od = file->private_data;
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index 7f5a01a11f97..404a0a32ddf6 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -422,18 +422,20 @@ void ovl_inode_update(struct inode *inode, struct dentry *upperdentry)
}
}
-static void ovl_dentry_version_inc(struct dentry *dentry, bool impurity)
+static void ovl_dir_version_inc(struct dentry *dentry, bool impurity)
{
struct inode *inode = d_inode(dentry);
WARN_ON(!inode_is_locked(inode));
+ WARN_ON(!d_is_dir(dentry));
/*
- * Version is used by readdir code to keep cache consistent. For merge
- * dirs all changes need to be noted. For non-merge dirs, cache only
- * contains impure (ones which have been copied up and have origins)
- * entries, so only need to note changes to impure entries.
+ * Version is used by readdir code to keep cache consistent.
+ * For merge dirs (or dirs with origin) all changes need to be noted.
+ * For non-merge dirs, cache contains only impure entries (i.e. ones
+ * which have been copied up and have origins), so only need to note
+ * changes to impure entries.
*/
- if (OVL_TYPE_MERGE(ovl_path_type(dentry)) || impurity)
+ if (!ovl_dir_is_real(dentry) || impurity)
OVL_I(inode)->version++;
}
@@ -442,7 +444,7 @@ void ovl_dir_modified(struct dentry *dentry, bool impurity)
/* Copy mtime/ctime */
ovl_copyattr(d_inode(ovl_dentry_upper(dentry)), d_inode(dentry));
- ovl_dentry_version_inc(dentry, impurity);
+ ovl_dir_version_inc(dentry, impurity);
}
u64 ovl_dentry_version_get(struct dentry *dentry)
@@ -638,21 +640,6 @@ int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry)
return err;
}
-void ovl_set_flag(unsigned long flag, struct inode *inode)
-{
- set_bit(flag, &OVL_I(inode)->flags);
-}
-
-void ovl_clear_flag(unsigned long flag, struct inode *inode)
-{
- clear_bit(flag, &OVL_I(inode)->flags);
-}
-
-bool ovl_test_flag(unsigned long flag, struct inode *inode)
-{
- return test_bit(flag, &OVL_I(inode)->flags);
-}
-
/**
* Caller must hold a reference to inode to prevent it from being freed while
* it is marked inuse.
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 547/677] RDMA/qedr: Fix error return code in qedr_iw_connect()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (545 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 546/677] ovl: invalidate readdir cache on changes to dir with origin Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 548/677] IB/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
` (136 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Wensheng,
Michal Kalderon ,
Jason Gunthorpe, Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 10dd83dbcd157baf7a78a09ddb2f84c627bc7f1d ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 82af6d19d8d9 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20210408113135.92165-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/qedr/qedr_iw_cm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/qedr_iw_cm.c b/drivers/infiniband/hw/qedr/qedr_iw_cm.c
index c4bc58736e48..1715fbe0719d 100644
--- a/drivers/infiniband/hw/qedr/qedr_iw_cm.c
+++ b/drivers/infiniband/hw/qedr/qedr_iw_cm.c
@@ -636,8 +636,10 @@ int qedr_iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
memcpy(in_params.local_mac_addr, dev->ndev->dev_addr, ETH_ALEN);
if (test_and_set_bit(QEDR_IWARP_CM_WAIT_FOR_CONNECT,
- &qp->iwarp_cm_flags))
+ &qp->iwarp_cm_flags)) {
+ rc = -ENODEV;
goto err; /* QP already being destroyed */
+ }
rc = dev->ops->iwarp_connect(dev->rdma_ctx, &in_params, &out_params);
if (rc) {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 548/677] IB/hfi1: Fix error return code in parse_platform_config()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (546 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 547/677] RDMA/qedr: Fix error return code in qedr_iw_connect() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 549/677] RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal() Greg Kroah-Hartman
` (135 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Wensheng,
Jason Gunthorpe, Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 4c7d9c69adadfc31892c7e8e134deb3546552106 ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210408113140.103032-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/firmware.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/hfi1/firmware.c b/drivers/infiniband/hw/hfi1/firmware.c
index 0e83d4b61e46..2cf102b5abd4 100644
--- a/drivers/infiniband/hw/hfi1/firmware.c
+++ b/drivers/infiniband/hw/hfi1/firmware.c
@@ -1916,6 +1916,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
dd_dev_err(dd, "%s: Failed CRC check at offset %ld\n",
__func__, (ptr -
(u32 *)dd->platform_config.data));
+ ret = -EINVAL;
goto bail;
}
/* Jump the CRC DWORD */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 549/677] RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (547 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 548/677] IB/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 550/677] cxgb4: Fix unintentional sign extension issues Greg Kroah-Hartman
` (134 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Wensheng,
Jason Gunthorpe, Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 22efb0a8d130c6379c1eb64cbace1542b27e37ff ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20210408113137.97202-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index 995d4633b0a1..d4d4959c2434 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -2784,6 +2784,7 @@ do_rq:
dev_err(&cq->hwq.pdev->dev,
"FP: CQ Processed terminal reported rq_cons_idx 0x%x exceeds max 0x%x\n",
cqe_cons, rq->max_wqe);
+ rc = -EINVAL;
goto done;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 550/677] cxgb4: Fix unintentional sign extension issues
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (548 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 549/677] RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal() Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 551/677] net: thunderx: Fix unintentional sign extension issue Greg Kroah-Hartman
` (133 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, David S. Miller, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit dd2c79677375c37f8f9f8d663eb4708495d595ef ]
The shifting of the u8 integers f->fs.nat_lip[] by 24 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that the top bit of the u8
is set then all then all the upper 32 bits of the u64 end up as
also being set because of the sign-extension. Fix this by
casting the u8 values to a u64 before the 24 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
index 83b46440408b..bde8494215c4 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -174,31 +174,31 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
WORD_MASK, f->fs.nat_lip[15] |
f->fs.nat_lip[14] << 8 |
f->fs.nat_lip[13] << 16 |
- f->fs.nat_lip[12] << 24, 1);
+ (u64)f->fs.nat_lip[12] << 24, 1);
set_tcb_field(adap, f, tid, TCB_SND_UNA_RAW_W + 1,
WORD_MASK, f->fs.nat_lip[11] |
f->fs.nat_lip[10] << 8 |
f->fs.nat_lip[9] << 16 |
- f->fs.nat_lip[8] << 24, 1);
+ (u64)f->fs.nat_lip[8] << 24, 1);
set_tcb_field(adap, f, tid, TCB_SND_UNA_RAW_W + 2,
WORD_MASK, f->fs.nat_lip[7] |
f->fs.nat_lip[6] << 8 |
f->fs.nat_lip[5] << 16 |
- f->fs.nat_lip[4] << 24, 1);
+ (u64)f->fs.nat_lip[4] << 24, 1);
set_tcb_field(adap, f, tid, TCB_SND_UNA_RAW_W + 3,
WORD_MASK, f->fs.nat_lip[3] |
f->fs.nat_lip[2] << 8 |
f->fs.nat_lip[1] << 16 |
- f->fs.nat_lip[0] << 24, 1);
+ (u64)f->fs.nat_lip[0] << 24, 1);
} else {
set_tcb_field(adap, f, tid, TCB_RX_FRAG3_LEN_RAW_W,
WORD_MASK, f->fs.nat_lip[3] |
f->fs.nat_lip[2] << 8 |
f->fs.nat_lip[1] << 16 |
- f->fs.nat_lip[0] << 24, 1);
+ (u64)f->fs.nat_lip[0] << 25, 1);
}
}
@@ -208,25 +208,25 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
WORD_MASK, f->fs.nat_fip[15] |
f->fs.nat_fip[14] << 8 |
f->fs.nat_fip[13] << 16 |
- f->fs.nat_fip[12] << 24, 1);
+ (u64)f->fs.nat_fip[12] << 24, 1);
set_tcb_field(adap, f, tid, TCB_RX_FRAG2_PTR_RAW_W + 1,
WORD_MASK, f->fs.nat_fip[11] |
f->fs.nat_fip[10] << 8 |
f->fs.nat_fip[9] << 16 |
- f->fs.nat_fip[8] << 24, 1);
+ (u64)f->fs.nat_fip[8] << 24, 1);
set_tcb_field(adap, f, tid, TCB_RX_FRAG2_PTR_RAW_W + 2,
WORD_MASK, f->fs.nat_fip[7] |
f->fs.nat_fip[6] << 8 |
f->fs.nat_fip[5] << 16 |
- f->fs.nat_fip[4] << 24, 1);
+ (u64)f->fs.nat_fip[4] << 24, 1);
set_tcb_field(adap, f, tid, TCB_RX_FRAG2_PTR_RAW_W + 3,
WORD_MASK, f->fs.nat_fip[3] |
f->fs.nat_fip[2] << 8 |
f->fs.nat_fip[1] << 16 |
- f->fs.nat_fip[0] << 24, 1);
+ (u64)f->fs.nat_fip[0] << 24, 1);
} else {
set_tcb_field(adap, f, tid,
@@ -234,13 +234,13 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
WORD_MASK, f->fs.nat_fip[3] |
f->fs.nat_fip[2] << 8 |
f->fs.nat_fip[1] << 16 |
- f->fs.nat_fip[0] << 24, 1);
+ (u64)f->fs.nat_fip[0] << 24, 1);
}
}
set_tcb_field(adap, f, tid, TCB_PDU_HDR_LEN_W, WORD_MASK,
(dp ? (nat_lp[1] | nat_lp[0] << 8) : 0) |
- (sp ? (nat_fp[1] << 16 | nat_fp[0] << 24) : 0),
+ (sp ? (nat_fp[1] << 16 | (u64)nat_fp[0] << 24) : 0),
1);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 551/677] net: thunderx: Fix unintentional sign extension issue
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (549 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 550/677] cxgb4: Fix unintentional sign extension issues Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 552/677] mt76: mt7921: fix kernel crash when the firmware fails to download Greg Kroah-Hartman
` (132 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, David S. Miller, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit e701a25840360706fe4cf5de0015913ca19c274b ]
The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
index f782e6af45e9..50bbe79fb93d 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
@@ -776,7 +776,7 @@ static void nicvf_rcv_queue_config(struct nicvf *nic, struct queue_set *qs,
mbx.rq.msg = NIC_MBOX_MSG_RQ_CFG;
mbx.rq.qs_num = qs->vnic_id;
mbx.rq.rq_num = qidx;
- mbx.rq.cfg = (rq->caching << 26) | (rq->cq_qs << 19) |
+ mbx.rq.cfg = ((u64)rq->caching << 26) | (rq->cq_qs << 19) |
(rq->cq_idx << 16) | (rq->cont_rbdr_qs << 9) |
(rq->cont_qs_rbdr_idx << 8) |
(rq->start_rbdr_qs << 1) | (rq->start_qs_rbdr_idx);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 552/677] mt76: mt7921: fix kernel crash when the firmware fails to download
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (550 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 551/677] net: thunderx: Fix unintentional sign extension issue Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 553/677] RDMA/srpt: Fix error return code in srpt_cm_req_recv() Greg Kroah-Hartman
` (131 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Claire Chang, YN Chen, Sean Wang,
Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit e230f0c44f011f3270680a506b19b7e84c5e8923 ]
Fix kernel crash when the firmware is missing or fails to download.
[ 9.444758] kernel BUG at drivers/pci/msi.c:375!
[ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO)
[ 9.505814] pc : free_msi_irqs+0x180/0x184
[ 9.509897] lr : free_msi_irqs+0x40/0x184
[ 9.513893] sp : ffffffc015193870
[ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2
[ 9.522492] x27: 0000000000000acd x26: 000000000000009a
[ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8
[ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200
[ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480
[ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000
[ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34
[ 9.554277] x15: 0000000000000000 x14: 0000000000080800
[ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000
[ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0
[ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780
[ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000
[ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000
[ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000
[ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000
[ 9.596660] Call trace:
[ 9.599095] free_msi_irqs+0x180/0x184
[ 9.602831] pci_disable_msi+0x100/0x130
[ 9.606740] pci_free_irq_vectors+0x24/0x30
[ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e]
[ 9.615693] pci_device_probe+0xd4/0x14c
[ 9.619604] really_probe+0x134/0x2ec
[ 9.623252] driver_probe_device+0x64/0xfc
[ 9.627335] device_driver_attach+0x4c/0x6c
[ 9.631506] __driver_attach+0xac/0xc0
[ 9.635243] bus_for_each_dev+0x8c/0xd4
[ 9.639066] driver_attach+0x2c/0x38
[ 9.642628] bus_add_driver+0xfc/0x1d0
[ 9.646365] driver_register+0x64/0xf8
[ 9.650101] __pci_register_driver+0x6c/0x7c
[ 9.654360] init_module+0x28/0xfdc [mt7921e]
[ 9.658704] do_one_initcall+0x13c/0x2d0
[ 9.662615] do_init_module+0x58/0x1e8
[ 9.666351] load_module+0xd80/0xeb4
[ 9.669912] __arm64_sys_finit_module+0xa8/0xe0
[ 9.674430] el0_svc_common+0xa4/0x16c
[ 9.678168] el0_svc_compat_handler+0x2c/0x40
[ 9.682511] el0_svc_compat+0x8/0x10
[ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000)
[ 9.692155] ---[ end trace 7621f966afbf0a29 ]---
[ 9.697385] Kernel panic - not syncing: Fatal exception
[ 9.702599] SMP: stopping secondary CPUs
[ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000
[ 9.712456] PHYS_OFFSET: 0xfffffff440000000
[ 9.716625] CPU features: 0x080026,2a80aa18
[ 9.720795] Memory Limit: none
Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Reported-by: Claire Chang <tientzu@google.com>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 0262bd8b1626..8e756871a056 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -146,10 +146,12 @@ static int mt7921_pci_probe(struct pci_dev *pdev,
ret = mt7921_register_device(dev);
if (ret)
- goto err_free_dev;
+ goto err_free_irq;
return 0;
+err_free_irq:
+ devm_free_irq(&pdev->dev, pdev->irq, dev);
err_free_dev:
mt76_free_device(&dev->mt76);
err_free_pci_vec:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 553/677] RDMA/srpt: Fix error return code in srpt_cm_req_recv()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (551 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 552/677] mt76: mt7921: fix kernel crash when the firmware fails to download Greg Kroah-Hartman
@ 2021-05-12 14:49 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 554/677] RDMA/rtrs-clt: destroy sysfs after removing session from active list Greg Kroah-Hartman
` (130 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Wang Wensheng,
Bart Van Assche, Jason Gunthorpe, Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 6bc950beff0c440ac567cdc4e7f4542a9920953d ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: db7683d7deb2 ("IB/srpt: Fix login-related race conditions")
Link: https://lore.kernel.org/r/20210408113132.87250-1-wangwensheng4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 6be60aa5ffe2..7f0420ad9057 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -2378,6 +2378,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev,
pr_info("rejected SRP_LOGIN_REQ because target %s_%d is not enabled\n",
dev_name(&sdev->device->dev), port_num);
mutex_unlock(&sport->mutex);
+ ret = -EINVAL;
goto reject;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 554/677] RDMA/rtrs-clt: destroy sysfs after removing session from active list
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (552 preceding siblings ...)
2021-05-12 14:49 ` [PATCH 5.12 553/677] RDMA/srpt: Fix error return code in srpt_cm_req_recv() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 555/677] pinctrl: at91-pio4: Fix slew rate disablement Greg Kroah-Hartman
` (129 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gioh Kim, Jack Wang, Jason Gunthorpe,
Sasha Levin
From: Gioh Kim <gi-oh.kim@ionos.com>
[ Upstream commit 7f4a8592ff29f19c5a2ca549d0973821319afaad ]
A session can be removed dynamically by sysfs interface "remove_path" that
eventually calls rtrs_clt_remove_path_from_sysfs function. The current
rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and
frees sess->stats object. Second it removes the session from the active
list.
Therefore some functions could access non-connected session and access the
freed sess->stats object even-if they check the session status before
accessing the session.
For instance rtrs_clt_request and get_next_path_min_inflight check the
session status and try to send IO to the session. The session status
could be changed when they are trying to send IO but they could not catch
the change and update the statistics information in sess->stats object,
and generate use-after-free problem.
(see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its
stats")
This patch changes the rtrs_clt_remove_path_from_sysfs to remove the
session from the active session list and then destroy the sysfs
interfaces.
Each function still should check the session status because closing or
error recovery paths can change the status.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210412084002.33582-1-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 6734329cca33..959ba0462ef0 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -2784,8 +2784,8 @@ int rtrs_clt_remove_path_from_sysfs(struct rtrs_clt_sess *sess,
} while (!changed && old_state != RTRS_CLT_DEAD);
if (likely(changed)) {
- rtrs_clt_destroy_sess_files(sess, sysfs_self);
rtrs_clt_remove_path_from_arr(sess);
+ rtrs_clt_destroy_sess_files(sess, sysfs_self);
kobject_put(&sess->kobj);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 555/677] pinctrl: at91-pio4: Fix slew rate disablement
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (553 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 554/677] RDMA/rtrs-clt: destroy sysfs after removing session from active list Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 556/677] i2c: cadence: fix reference leak when pm_runtime_get_sync fails Greg Kroah-Hartman
` (128 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tudor Ambarus, Claudiu Beznea,
Ludovic Desroches, Linus Walleij, Sasha Levin
From: Tudor Ambarus <tudor.ambarus@microchip.com>
[ Upstream commit cbde6c823bfaa553fb162257a5926ba15ebaaa43 ]
The slew rate was enabled by default for each configuration of the
pin. In case the pin had more than one configuration, even if
we set the slew rate as disabled in the device tree, the next pin
configuration would set again the slew rate enabled by default,
overwriting the slew rate disablement.
Instead of enabling the slew rate by default for each pin configuration,
enable the slew rate by default just once per pin, regardless of the
number of configurations. This way the slew rate disablement will also
work for cases where pins have multiple configurations.
Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index e71ebccc479c..03c32b2c5d30 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
conf = atmel_pin_config_read(pctldev, pin_id);
+ /* Keep slew rate enabled by default. */
+ if (atmel_pioctrl->slew_rate_support)
+ conf |= ATMEL_PIO_SR_MASK;
+
for (i = 0; i < num_configs; i++) {
unsigned int param = pinconf_to_config_param(configs[i]);
unsigned int arg = pinconf_to_config_argument(configs[i]);
@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
__func__, pin_id, configs[i]);
- /* Keep slew rate enabled by default. */
- if (atmel_pioctrl->slew_rate_support)
- conf |= ATMEL_PIO_SR_MASK;
-
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
conf &= (~ATMEL_PIO_PUEN_MASK);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 556/677] i2c: cadence: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (554 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 555/677] pinctrl: at91-pio4: Fix slew rate disablement Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 557/677] i2c: img-scb: " Greg Kroah-Hartman
` (127 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 23ceb8462dc6f4b4decdb5536a7e5fc477cdf0b6 ]
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 7fa32329ca03 ("i2c: cadence: Move to sensible power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-cadence.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index e4b7f2a951ad..e8eae8725900 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -789,7 +789,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
bool change_role = false;
#endif
- ret = pm_runtime_get_sync(id->dev);
+ ret = pm_runtime_resume_and_get(id->dev);
if (ret < 0)
return ret;
@@ -911,7 +911,7 @@ static int cdns_reg_slave(struct i2c_client *slave)
if (slave->flags & I2C_CLIENT_TEN)
return -EAFNOSUPPORT;
- ret = pm_runtime_get_sync(id->dev);
+ ret = pm_runtime_resume_and_get(id->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 557/677] i2c: img-scb: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (555 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 556/677] i2c: cadence: fix reference leak when pm_runtime_get_sync fails Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 558/677] i2c: imx-lpi2c: " Greg Kroah-Hartman
` (126 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 223125e37af8a641ea4a09747a6a52172fc4b903 ]
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 93222bd9b966 ("i2c: img-scb: Add runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-img-scb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 98a89301ed2a..8e987945ed45 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1057,7 +1057,7 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
atomic = true;
}
- ret = pm_runtime_get_sync(adap->dev.parent);
+ ret = pm_runtime_resume_and_get(adap->dev.parent);
if (ret < 0)
return ret;
@@ -1158,7 +1158,7 @@ static int img_i2c_init(struct img_i2c *i2c)
u32 rev;
int ret;
- ret = pm_runtime_get_sync(i2c->adap.dev.parent);
+ ret = pm_runtime_resume_and_get(i2c->adap.dev.parent);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 558/677] i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (556 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 557/677] i2c: img-scb: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 559/677] i2c: imx: " Greg Kroah-Hartman
` (125 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 278e5bbdb9a94fa063c0f9bcde2479d0b8042462 ]
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 9db6ccded5e9..8b9ba055c418 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -259,7 +259,7 @@ static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
unsigned int temp;
int ret;
- ret = pm_runtime_get_sync(lpi2c_imx->adapter.dev.parent);
+ ret = pm_runtime_resume_and_get(lpi2c_imx->adapter.dev.parent);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 559/677] i2c: imx: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (557 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 558/677] i2c: imx-lpi2c: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 560/677] i2c: omap: " Greg Kroah-Hartman
` (124 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Oleksij Rempel, Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 47ff617217ca6a13194fcb35c6c3a0c57c080693 ]
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 3a5ee18d2a32 ("i2c: imx: implement master_xfer_atomic callback")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index b80fdc1f0092..dc9c4b4cc25a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1253,7 +1253,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
int result;
- result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+ result = pm_runtime_resume_and_get(i2c_imx->adapter.dev.parent);
if (result < 0)
return result;
@@ -1496,7 +1496,7 @@ static int i2c_imx_remove(struct platform_device *pdev)
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
int irq, ret;
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 560/677] i2c: omap: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (558 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 559/677] i2c: imx: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 561/677] i2c: sprd: " Greg Kroah-Hartman
` (123 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Grygorii Strashko, Vignesh Raghavendra, Wolfram Sang,
Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 780f629741257ed6c54bd3eb53b57f648eabf200 ]
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8dc4 ("I2C: OMAP: Handle error check for pm runtime")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-omap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 12ac4212aded..d4f6c6d60683 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1404,9 +1404,9 @@ omap_i2c_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(omap->dev);
- r = pm_runtime_get_sync(omap->dev);
+ r = pm_runtime_resume_and_get(omap->dev);
if (r < 0)
- goto err_free_mem;
+ goto err_disable_pm;
/*
* Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
@@ -1513,8 +1513,8 @@ err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
+err_disable_pm:
pm_runtime_disable(&pdev->dev);
-err_free_mem:
return r;
}
@@ -1525,7 +1525,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
int ret;
i2c_del_adapter(&omap->adapter);
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 561/677] i2c: sprd: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (559 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 560/677] i2c: omap: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 562/677] i2c: stm32f7: " Greg Kroah-Hartman
` (122 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 3a4f326463117cee3adcb72999ca34a9aaafda93 ]
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-sprd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 2917fecf6c80..8ead7e021008 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -290,7 +290,7 @@ static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
int im, ret;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -576,7 +576,7 @@ static int sprd_i2c_remove(struct platform_device *pdev)
struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
int ret;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 562/677] i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (560 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 561/677] i2c: sprd: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 563/677] i2c: xiic: " Greg Kroah-Hartman
` (121 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit 2c662660ce2bd3b09dae21a9a9ac9395e1e6c00b ]
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-stm32f7.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index c62c815b88eb..318abfa7926b 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1652,7 +1652,7 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
i2c_dev->msg_id = 0;
f7_msg->smbus = false;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -1698,7 +1698,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
f7_msg->read_write = read_write;
f7_msg->smbus = true;
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
@@ -1799,7 +1799,7 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
if (ret)
return ret;
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
@@ -1880,7 +1880,7 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
WARN_ON(!i2c_dev->slave[id]);
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -2273,7 +2273,7 @@ static int stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
int ret;
struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -2295,7 +2295,7 @@ static int stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
int ret;
struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 563/677] i2c: xiic: fix reference leak when pm_runtime_get_sync fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (561 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 562/677] i2c: stm32f7: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 564/677] i2c: cadence: add IRQ check Greg Kroah-Hartman
` (120 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Qinglang Miao,
Wolfram Sang, Sasha Levin
From: Qinglang Miao <miaoqinglang@huawei.com>
[ Upstream commit a85c5c7a3aa8041777ff691400b4046e56149fd3 ]
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 10b17004a74c ("i2c: xiic: Fix the clocking across bind unbind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-xiic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 087b2951942e..2a8568b97c14 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -706,7 +706,7 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
- err = pm_runtime_get_sync(i2c->dev);
+ err = pm_runtime_resume_and_get(i2c->dev);
if (err < 0)
return err;
@@ -873,7 +873,7 @@ static int xiic_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);
- ret = pm_runtime_get_sync(i2c->dev);
+ ret = pm_runtime_resume_and_get(i2c->dev);
if (ret < 0)
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 564/677] i2c: cadence: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (562 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 563/677] i2c: xiic: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 565/677] i2c: emev2: " Greg Kroah-Hartman
` (119 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 5581c2c5d02bc63a0edb53e061c8e97cd490646e ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-cadence.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index e8eae8725900..c1bbc4caeb5c 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -1200,7 +1200,10 @@ static int cdns_i2c_probe(struct platform_device *pdev)
if (IS_ERR(id->membase))
return PTR_ERR(id->membase);
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.owner = THIS_MODULE;
id->adap.dev.of_node = pdev->dev.of_node;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 565/677] i2c: emev2: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (563 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 564/677] i2c: cadence: add IRQ check Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 566/677] i2c: jz4780: " Greg Kroah-Hartman
` (118 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit bb6129c32867baa7988f7fd2066cf18ed662d240 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: 5faf6e1f58b4 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-emev2.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index a08554c1a570..bdff0e6345d9 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -395,7 +395,10 @@ static int em_i2c_probe(struct platform_device *pdev)
em_i2c_reset(&priv->adap);
- priv->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_clk;
+ priv->irq = ret;
ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
"em_i2c", priv);
if (ret)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 566/677] i2c: jz4780: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (564 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 565/677] i2c: emev2: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 567/677] i2c: mlxbf: " Greg Kroah-Hartman
` (117 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit c5e5f7a8d931fb4beba245bdbc94734175fda9de ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-jz4780.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index 55177eb21d7b..baa7319eee53 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -825,7 +825,10 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
- i2c->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err;
+ i2c->irq = ret;
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 567/677] i2c: mlxbf: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (565 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 566/677] i2c: jz4780: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 568/677] i2c: rcar: " Greg Kroah-Hartman
` (116 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 0d3bf53e897dce943b98d975bbde77156af6cd81 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-mlxbf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index 2fb0532d8a16..ab261d762dea 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -2376,6 +2376,8 @@ static int mlxbf_i2c_probe(struct platform_device *pdev)
mlxbf_i2c_init_slave(pdev, priv);
irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(dev, irq, mlxbf_smbus_irq,
IRQF_ONESHOT | IRQF_SHARED | IRQF_PROBE_SHARED,
dev_name(dev), priv);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 568/677] i2c: rcar: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (566 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 567/677] i2c: mlxbf: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 569/677] i2c: sh7760: " Greg Kroah-Hartman
` (115 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Geert Uytterhoeven,
Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 147178cf03a6dcb337e703d4dacd008683022a58 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with the
invalid IRQ #s.
Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-rcar.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 12f6d452c0f7..8722ca23f889 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -1027,7 +1027,10 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (of_property_read_bool(dev->of_node, "smbus"))
priv->flags |= ID_P_HOST_NOTIFY;
- priv->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto out_pm_disable;
+ priv->irq = ret;
ret = devm_request_irq(dev, priv->irq, irqhandler, irqflags, dev_name(dev), priv);
if (ret < 0) {
dev_err(dev, "cannot get irq %d\n", priv->irq);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 569/677] i2c: sh7760: add IRQ check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (567 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 568/677] i2c: rcar: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 570/677] fuse: fix matching of FUSE_DEV_IOC_CLONE command Greg Kroah-Hartman
` (114 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit e5b2e3e742015dd2aa6bc7bcef2cb59b2de1221c ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: a26c20b1fa6d ("i2c: Renesas SH7760 I2C master driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-sh7760.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index c2005c789d2b..c79c9f542c5a 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -471,7 +471,10 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
goto out2;
}
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.nr = pdev->id;
id->adap.algo = &sh7760_i2c_algo;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 570/677] fuse: fix matching of FUSE_DEV_IOC_CLONE command
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (568 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 569/677] i2c: sh7760: " Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 571/677] iwlwifi: rs-fw: dont support stbc for HE 160 Greg Kroah-Hartman
` (113 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Alessio Balsini,
Miklos Szeredi, Sasha Levin
From: Alessio Balsini <balsini@android.com>
[ Upstream commit 6076f5f341e612152879bfda99f0b76c1953bf0b ]
With commit f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse
device") the matching constraints for the FUSE_DEV_IOC_CLONE ioctl command
are relaxed, limited to the testing of command type and number. As Arnd
noticed, this is wrong as it wouldn't ensure the correctness of the data
size or direction for the received FUSE device ioctl.
Fix by bringing back the comparison of the ioctl received by the FUSE
device to the originally generated FUSE_DEV_IOC_CLONE.
Fixes: f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse device")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/fuse/dev.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index c0fee830a34e..a5ceccc5ef00 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -2233,11 +2233,8 @@ static long fuse_dev_ioctl(struct file *file, unsigned int cmd,
int oldfd;
struct fuse_dev *fud = NULL;
- if (_IOC_TYPE(cmd) != FUSE_DEV_IOC_MAGIC)
- return -ENOTTY;
-
- switch (_IOC_NR(cmd)) {
- case _IOC_NR(FUSE_DEV_IOC_CLONE):
+ switch (cmd) {
+ case FUSE_DEV_IOC_CLONE:
res = -EFAULT;
if (!get_user(oldfd, (__u32 __user *)arg)) {
struct file *old = fget(oldfd);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 571/677] iwlwifi: rs-fw: dont support stbc for HE 160
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (569 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 570/677] fuse: fix matching of FUSE_DEV_IOC_CLONE command Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 572/677] iwlwifi: dbg: disable ini debug in 9000 family and below Greg Kroah-Hartman
` (112 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mordechay Goodstein, Luca Coelho,
Sasha Levin
From: Mordechay Goodstein <mordechay.goodstein@intel.com>
[ Upstream commit a9174578262b86f15cb1882f35e53b1fae0649fd ]
Our HE doesn't support it so never set HE 160 stbc
Fixes: 3e467b8e4cf4 ("iwlwifi: rs-fw: enable STBC in he correctly")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124418.550fd1903eb7.I8ddbc2f87044a5ef78d916c9c59be797811a1b7f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/wireless/intel/iwlwifi/mvm/rs-fw.c | 20 ++++++++-----------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
index 8772b65c9dab..2d58cb969918 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
#include "rs.h"
#include "fw-api.h"
@@ -72,19 +72,15 @@ static u16 rs_fw_get_config_flags(struct iwl_mvm *mvm,
bool vht_ena = vht_cap->vht_supported;
u16 flags = 0;
+ /* get STBC flags */
if (mvm->cfg->ht_params->stbc &&
(num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1)) {
- if (he_cap->has_he) {
- if (he_cap->he_cap_elem.phy_cap_info[2] &
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ)
- flags |= IWL_TLC_MNG_CFG_FLAGS_STBC_MSK;
-
- if (he_cap->he_cap_elem.phy_cap_info[7] &
- IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ)
- flags |= IWL_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK;
- } else if ((ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) ||
- (vht_ena &&
- (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK)))
+ if (he_cap->has_he && he_cap->he_cap_elem.phy_cap_info[2] &
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ)
+ flags |= IWL_TLC_MNG_CFG_FLAGS_STBC_MSK;
+ else if (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK)
+ flags |= IWL_TLC_MNG_CFG_FLAGS_STBC_MSK;
+ else if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC)
flags |= IWL_TLC_MNG_CFG_FLAGS_STBC_MSK;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 572/677] iwlwifi: dbg: disable ini debug in 9000 family and below
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (570 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 571/677] iwlwifi: rs-fw: dont support stbc for HE 160 Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 573/677] powerpc/xive: Drop check on irq_data in xive_core_debug_show() Greg Kroah-Hartman
` (111 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mukesh Sisodiya, Luca Coelho, Sasha Levin
From: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
[ Upstream commit 7c81a025054cd0aeeeaf17aba2e9757f0a6a38a1 ]
Yoyo based debug is not applicable to old devices. As init debug is
enabled by default in the driver, it needs to be disabled to work the
old debug mechanism in old devices.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Fixes: b0d8d2c27007 ("iwlwifi: yoyo: enable yoyo by default")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
index 579bc81cc0ae..4cd8c39cc3e9 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
#include <linux/firmware.h>
#include "iwl-drv.h"
@@ -426,7 +426,8 @@ void iwl_dbg_tlv_load_bin(struct device *dev, struct iwl_trans *trans)
const struct firmware *fw;
int res;
- if (!iwlwifi_mod_params.enable_ini)
+ if (!iwlwifi_mod_params.enable_ini ||
+ trans->trans_cfg->device_family <= IWL_DEVICE_FAMILY_9000)
return;
res = firmware_request_nowarn(&fw, "iwl-debug-yoyo.bin", dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 573/677] powerpc/xive: Drop check on irq_data in xive_core_debug_show()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (571 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 572/677] iwlwifi: dbg: disable ini debug in 9000 family and below Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 574/677] powerpc/xive: Fix xmon command "dxi" Greg Kroah-Hartman
` (110 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Cédric Le Goater, Greg Kurz, Michael Ellerman, Sasha Levin
From: Cédric Le Goater <clg@kaod.org>
[ Upstream commit a74ce5926b20cd0e6d624a9b2527073a96dfed7f ]
When looping on IRQ descriptor, irq_data is always valid.
Fixes: 930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/sysdev/xive/common.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 595310e056f4..6e43bba80707 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1599,6 +1599,8 @@ static void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data
u32 target;
u8 prio;
u32 lirq;
+ struct xive_irq_data *xd;
+ u64 val;
if (!is_xive_irq(chip))
return;
@@ -1612,17 +1614,14 @@ static void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data
seq_printf(m, "IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
hw_irq, target, prio, lirq);
- if (d) {
- struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
- u64 val = xive_esb_read(xd, XIVE_ESB_GET);
-
- seq_printf(m, "flags=%c%c%c PQ=%c%c",
- xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
- xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
- xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
- val & XIVE_ESB_VAL_P ? 'P' : '-',
- val & XIVE_ESB_VAL_Q ? 'Q' : '-');
- }
+ xd = irq_data_get_irq_handler_data(d);
+ val = xive_esb_read(xd, XIVE_ESB_GET);
+ seq_printf(m, "flags=%c%c%c PQ=%c%c",
+ xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
+ val & XIVE_ESB_VAL_P ? 'P' : '-',
+ val & XIVE_ESB_VAL_Q ? 'Q' : '-');
seq_puts(m, "\n");
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 574/677] powerpc/xive: Fix xmon command "dxi"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (572 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 573/677] powerpc/xive: Drop check on irq_data in xive_core_debug_show() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 575/677] powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order Greg Kroah-Hartman
` (109 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Dan Carpenter,
Cédric Le Goater, Greg Kurz, Michael Ellerman, Sasha Levin
From: Cédric Le Goater <clg@kaod.org>
[ Upstream commit 33e4bc5946432a4ac173fd08e8e30a13ab94d06d ]
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/sysdev/xive/common.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 6e43bba80707..5cacb632eb37 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -253,17 +253,20 @@ notrace void xmon_xive_do_dump(int cpu)
xmon_printf("\n");
}
+static struct irq_data *xive_get_irq_data(u32 hw_irq)
+{
+ unsigned int irq = irq_find_mapping(xive_irq_domain, hw_irq);
+
+ return irq ? irq_get_irq_data(irq) : NULL;
+}
+
int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
{
- struct irq_chip *chip = irq_data_get_irq_chip(d);
int rc;
u32 target;
u8 prio;
u32 lirq;
- if (!is_xive_irq(chip))
- return -EINVAL;
-
rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
if (rc) {
xmon_printf("IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
@@ -273,6 +276,9 @@ int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
xmon_printf("IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
hw_irq, target, prio, lirq);
+ if (!d)
+ d = xive_get_irq_data(hw_irq);
+
if (d) {
struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
u64 val = xive_esb_read(xd, XIVE_ESB_GET);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 575/677] powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (573 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 574/677] powerpc/xive: Fix xmon command "dxi" Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 576/677] ASoC: ak5558: correct reset polarity Greg Kroah-Hartman
` (108 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Piggin, Michael Ellerman,
Sasha Levin
From: Nicholas Piggin <npiggin@gmail.com>
[ Upstream commit 5a5a893c4ad897b8a36f846602895515b7407a71 ]
user_exit_irqoff() -> __context_tracking_exit -> vtime_user_exit
warns in __seqprop_assert due to lockdep thinking preemption is enabled
because trace_hardirqs_off() has not yet been called.
Switch the order of these two calls, which matches their ordering in
interrupt_enter_prepare.
Fixes: 5f0b6ac3905f ("powerpc/64/syscall: Reconcile interrupts")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/interrupt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
index c475a229a42a..352346e14a08 100644
--- a/arch/powerpc/kernel/interrupt.c
+++ b/arch/powerpc/kernel/interrupt.c
@@ -34,11 +34,11 @@ notrace long system_call_exception(long r3, long r4, long r5,
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
+ trace_hardirqs_off(); /* finish reconciling */
+
CT_WARN_ON(ct_state() == CONTEXT_KERNEL);
user_exit_irqoff();
- trace_hardirqs_off(); /* finish reconciling */
-
if (!IS_ENABLED(CONFIG_BOOKE) && !IS_ENABLED(CONFIG_40x))
BUG_ON(!(regs->msr & MSR_RI));
BUG_ON(!(regs->msr & MSR_PR));
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 576/677] ASoC: ak5558: correct reset polarity
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (574 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 575/677] powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 577/677] net/mlx5: Fix bit-wise and with zero Greg Kroah-Hartman
` (107 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shengjiu Wang, Mark Brown, Sasha Levin
From: Shengjiu Wang <shengjiu.wang@nxp.com>
[ Upstream commit 0b93bbc977af55fd10687f2c96c807cba95cb927 ]
Reset (aka power off) happens when the reset gpio is made active.
The reset gpio is GPIO_ACTIVE_LOW
Fixes: 920884777480 ("ASoC: ak5558: Add support for AK5558 ADC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1618382024-31725-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/ak5558.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c
index 85bdd0534180..80b3b162ca5b 100644
--- a/sound/soc/codecs/ak5558.c
+++ b/sound/soc/codecs/ak5558.c
@@ -272,7 +272,7 @@ static void ak5558_power_off(struct ak5558_priv *ak5558)
if (!ak5558->reset_gpiod)
return;
- gpiod_set_value_cansleep(ak5558->reset_gpiod, 0);
+ gpiod_set_value_cansleep(ak5558->reset_gpiod, 1);
usleep_range(1000, 2000);
}
@@ -281,7 +281,7 @@ static void ak5558_power_on(struct ak5558_priv *ak5558)
if (!ak5558->reset_gpiod)
return;
- gpiod_set_value_cansleep(ak5558->reset_gpiod, 1);
+ gpiod_set_value_cansleep(ak5558->reset_gpiod, 0);
usleep_range(1000, 2000);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 577/677] net/mlx5: Fix bit-wise and with zero
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (575 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 576/677] ASoC: ak5558: correct reset polarity Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 578/677] net/packet: remove data races in fanout operations Greg Kroah-Hartman
` (106 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Saeed Mahameed, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 82c3ba31c370b6001cbf90689e98da1fb6f26aef ]
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.
Addresses-Coverity: ("Logically dead code")
Fixes: 7dfee4b1d79e ("net/mlx5: IPsec, Refactor SA handle creation and destruction")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
index 22bee4990232..bb61f52d782d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
@@ -850,7 +850,7 @@ mlx5_fpga_ipsec_release_sa_ctx(struct mlx5_fpga_ipsec_sa_ctx *sa_ctx)
return;
}
- if (sa_ctx->fpga_xfrm->accel_xfrm.attrs.action &
+ if (sa_ctx->fpga_xfrm->accel_xfrm.attrs.action ==
MLX5_ACCEL_ESP_ACTION_DECRYPT)
ida_simple_remove(&fipsec->halloc, sa_ctx->sa_handle);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 578/677] net/packet: remove data races in fanout operations
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (576 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 577/677] net/mlx5: Fix bit-wise and with zero Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 579/677] drm/i915/gvt: Fix error code in intel_gvt_init_device() Greg Kroah-Hartman
` (105 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Gong, Sishuai,
Willem de Bruijn, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 94f633ea8ade8418634d152ad0931133338226f6 ]
af_packet fanout uses RCU rules to ensure f->arr elements
are not dismantled before RCU grace period.
However, it lacks rcu accessors to make sure KCSAN and other tools
wont detect data races. Stupid compilers could also play games.
Fixes: dc99f600698d ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/packet/af_packet.c | 15 +++++++++------
net/packet/internal.h | 2 +-
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index e24b2841c643..9611e41c7b8b 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1359,7 +1359,7 @@ static unsigned int fanout_demux_rollover(struct packet_fanout *f,
struct packet_sock *po, *po_next, *po_skip = NULL;
unsigned int i, j, room = ROOM_NONE;
- po = pkt_sk(f->arr[idx]);
+ po = pkt_sk(rcu_dereference(f->arr[idx]));
if (try_self) {
room = packet_rcv_has_room(po, skb);
@@ -1371,7 +1371,7 @@ static unsigned int fanout_demux_rollover(struct packet_fanout *f,
i = j = min_t(int, po->rollover->sock, num - 1);
do {
- po_next = pkt_sk(f->arr[i]);
+ po_next = pkt_sk(rcu_dereference(f->arr[i]));
if (po_next != po_skip && !READ_ONCE(po_next->pressure) &&
packet_rcv_has_room(po_next, skb) == ROOM_NORMAL) {
if (i != j)
@@ -1466,7 +1466,7 @@ static int packet_rcv_fanout(struct sk_buff *skb, struct net_device *dev,
if (fanout_has_flag(f, PACKET_FANOUT_FLAG_ROLLOVER))
idx = fanout_demux_rollover(f, skb, idx, true, num);
- po = pkt_sk(f->arr[idx]);
+ po = pkt_sk(rcu_dereference(f->arr[idx]));
return po->prot_hook.func(skb, dev, &po->prot_hook, orig_dev);
}
@@ -1480,7 +1480,7 @@ static void __fanout_link(struct sock *sk, struct packet_sock *po)
struct packet_fanout *f = po->fanout;
spin_lock(&f->lock);
- f->arr[f->num_members] = sk;
+ rcu_assign_pointer(f->arr[f->num_members], sk);
smp_wmb();
f->num_members++;
if (f->num_members == 1)
@@ -1495,11 +1495,14 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po)
spin_lock(&f->lock);
for (i = 0; i < f->num_members; i++) {
- if (f->arr[i] == sk)
+ if (rcu_dereference_protected(f->arr[i],
+ lockdep_is_held(&f->lock)) == sk)
break;
}
BUG_ON(i >= f->num_members);
- f->arr[i] = f->arr[f->num_members - 1];
+ rcu_assign_pointer(f->arr[i],
+ rcu_dereference_protected(f->arr[f->num_members - 1],
+ lockdep_is_held(&f->lock)));
f->num_members--;
if (f->num_members == 0)
__dev_remove_pack(&f->prot_hook);
diff --git a/net/packet/internal.h b/net/packet/internal.h
index 5f61e59ebbff..48af35b1aed2 100644
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -94,7 +94,7 @@ struct packet_fanout {
spinlock_t lock;
refcount_t sk_ref;
struct packet_type prot_hook ____cacheline_aligned_in_smp;
- struct sock *arr[];
+ struct sock __rcu *arr[];
};
struct packet_rollover {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 579/677] drm/i915/gvt: Fix error code in intel_gvt_init_device()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (577 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 578/677] net/packet: remove data races in fanout operations Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 580/677] iommu/vt-d: Fix an error handling path in intel_prepare_irq_remapping() Greg Kroah-Hartman
` (104 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Zhenyu Wang, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 329328ec6a87f2c1275f50d979d55513de458409 ]
The intel_gvt_init_vgpu_type_groups() function is only called from
intel_gvt_init_device(). If it fails then the intel_gvt_init_device()
prints the error code and propagates it back again. That's a bug
because false is zero/success. The fix is to modify it to return zero
or negative error codes and make everything consistent.
Fixes: c5d71cb31723 ("drm/i915/gvt: Move vGPU type related code into gvt file")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YHaFQtk/DIVYK1u5@mwanda
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/gvt/gvt.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/gvt/gvt.c b/drivers/gpu/drm/i915/gvt/gvt.c
index d1d8ee4a5f16..57578bf28d77 100644
--- a/drivers/gpu/drm/i915/gvt/gvt.c
+++ b/drivers/gpu/drm/i915/gvt/gvt.c
@@ -126,7 +126,7 @@ static bool intel_get_gvt_attrs(struct attribute_group ***intel_vgpu_type_groups
return true;
}
-static bool intel_gvt_init_vgpu_type_groups(struct intel_gvt *gvt)
+static int intel_gvt_init_vgpu_type_groups(struct intel_gvt *gvt)
{
int i, j;
struct intel_vgpu_type *type;
@@ -144,7 +144,7 @@ static bool intel_gvt_init_vgpu_type_groups(struct intel_gvt *gvt)
gvt_vgpu_type_groups[i] = group;
}
- return true;
+ return 0;
unwind:
for (j = 0; j < i; j++) {
@@ -152,7 +152,7 @@ unwind:
kfree(group);
}
- return false;
+ return -ENOMEM;
}
static void intel_gvt_cleanup_vgpu_type_groups(struct intel_gvt *gvt)
@@ -360,7 +360,7 @@ int intel_gvt_init_device(struct drm_i915_private *i915)
goto out_clean_thread;
ret = intel_gvt_init_vgpu_type_groups(gvt);
- if (ret == false) {
+ if (ret) {
gvt_err("failed to init vgpu type groups: %d\n", ret);
goto out_clean_types;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 580/677] iommu/vt-d: Fix an error handling path in intel_prepare_irq_remapping()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (578 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 579/677] drm/i915/gvt: Fix error code in intel_gvt_init_device() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 581/677] iommu/amd: Put newline after closing bracket in warning Greg Kroah-Hartman
` (103 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Lu Baolu,
Joerg Roedel, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit 745610c4a3e3baaebf6d1f8cd5b4d82892432520 ]
If 'intel_cap_audit()' fails, we should return directly, as already done in
the surrounding error handling path.
Fixes: ad3d19029979 ("iommu/vt-d: Audit IOMMU Capabilities and add helper functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/98d531caabe66012b4fffc7813fd4b9470afd517.1618124777.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/intel/irq_remapping.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/irq_remapping.c b/drivers/iommu/intel/irq_remapping.c
index 611ef5243cb6..5c16ebe037a1 100644
--- a/drivers/iommu/intel/irq_remapping.c
+++ b/drivers/iommu/intel/irq_remapping.c
@@ -736,7 +736,7 @@ static int __init intel_prepare_irq_remapping(void)
return -ENODEV;
if (intel_cap_audit(CAP_AUDIT_STATIC_IRQR, NULL))
- goto error;
+ return -ENODEV;
if (!dmar_ir_support())
return -ENODEV;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 581/677] iommu/amd: Put newline after closing bracket in warning
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (579 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 580/677] iommu/vt-d: Fix an error handling path in intel_prepare_irq_remapping() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 582/677] perf beauty: Fix fsconfig generator Greg Kroah-Hartman
` (102 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, iommu, Suravee Suthikulpanit,
Brijesh Singh, Robert Richter, Paul Menzel, Joerg Roedel,
Sasha Levin
From: Paul Menzel <pmenzel@molgen.mpg.de>
[ Upstream commit 304c73ba69459d4c18c2a4b843be6f5777b4b85c ]
Currently, on the Dell OptiPlex 5055 the EFR mismatch warning looks like
below.
[ 1.479774] smpboot: CPU0: AMD Ryzen 5 PRO 1500 Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[…]
[ 2.507370] AMD-Vi: [Firmware Warn]: EFR mismatch. Use IVHD EFR (0xf77ef22294ada : 0x400f77ef22294ada
).
Add the newline after the `).`, so it’s on one line.
Fixes: a44092e326d4 ("iommu/amd: Use IVHD EFR for early initialization of IOMMU features")
Cc: iommu@lists.linux-foundation.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Robert Richter <rrichter@amd.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210412180141.29605-1-pmenzel@molgen.mpg.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/amd/init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 321f5906e6ed..f7e31018cd0b 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -1837,7 +1837,7 @@ static void __init late_iommu_features_init(struct amd_iommu *iommu)
* IVHD and MMIO conflict.
*/
if (features != iommu->features)
- pr_warn(FW_WARN "EFR mismatch. Use IVHD EFR (%#llx : %#llx\n).",
+ pr_warn(FW_WARN "EFR mismatch. Use IVHD EFR (%#llx : %#llx).\n",
features, iommu->features);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 582/677] perf beauty: Fix fsconfig generator
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (580 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 581/677] iommu/amd: Put newline after closing bracket in warning Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 583/677] drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add() Greg Kroah-Hartman
` (101 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vitaly Chikunov,
Arnaldo Carvalho de Melo, Sasha Levin, Dmitry V . Levin
From: Vitaly Chikunov <vt@altlinux.org>
[ Upstream commit 2e1daee14e67fbf9b27280b974e2c680a22cabea ]
After gnulib update sed stopped matching `[[:space:]]*+' as before,
causing the following compilation error:
In file included from builtin-trace.c:719:
trace/beauty/generated/fsconfig_arrays.c:2:3: error: expected expression before ']' token
2 | [] = "",
| ^
trace/beauty/generated/fsconfig_arrays.c:2:3: error: array index in initializer not of integer type
trace/beauty/generated/fsconfig_arrays.c:2:3: note: (near initialization for 'fsconfig_cmds')
Fix this by correcting the regular expression used in the generator.
Also, clean up the script by removing redundant egrep, xargs, and printf
invocations.
Committer testing:
Continues to work:
$ cat tools/perf/trace/beauty/fsconfig.sh
#!/bin/sh
# SPDX-License-Identifier: LGPL-2.1
if [ $# -ne 1 ] ; then
linux_header_dir=tools/include/uapi/linux
else
linux_header_dir=$1
fi
linux_mount=${linux_header_dir}/mount.h
printf "static const char *fsconfig_cmds[] = {\n"
ms='[[:space:]]*'
sed -nr "s/^${ms}FSCONFIG_([[:alnum:]_]+)${ms}=${ms}([[:digit:]]+)${ms},.*/\t[\2] = \"\1\",/p" \
${linux_mount}
printf "};\n"
$ tools/perf/trace/beauty/fsconfig.sh
static const char *fsconfig_cmds[] = {
[0] = "SET_FLAG",
[1] = "SET_STRING",
[2] = "SET_BINARY",
[3] = "SET_PATH",
[4] = "SET_PATH_EMPTY",
[5] = "SET_FD",
[6] = "CMD_CREATE",
[7] = "CMD_RECONFIGURE",
};
$
Fixes: d35293004a5e4 ("perf beauty: Add generator for fsconfig's 'cmd' arg values")
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Co-authored-by: Dmitry V. Levin <ldv@altlinux.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20210414182723.1670663-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/trace/beauty/fsconfig.sh | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/tools/perf/trace/beauty/fsconfig.sh b/tools/perf/trace/beauty/fsconfig.sh
index 83fb24df05c9..bc6ef7bb7a5f 100755
--- a/tools/perf/trace/beauty/fsconfig.sh
+++ b/tools/perf/trace/beauty/fsconfig.sh
@@ -10,8 +10,7 @@ fi
linux_mount=${linux_header_dir}/mount.h
printf "static const char *fsconfig_cmds[] = {\n"
-regex='^[[:space:]]*+FSCONFIG_([[:alnum:]_]+)[[:space:]]*=[[:space:]]*([[:digit:]]+)[[:space:]]*,[[:space:]]*.*'
-egrep $regex ${linux_mount} | \
- sed -r "s/$regex/\2 \1/g" | \
- xargs printf "\t[%s] = \"%s\",\n"
+ms='[[:space:]]*'
+sed -nr "s/^${ms}FSCONFIG_([[:alnum:]_]+)${ms}=${ms}([[:digit:]]+)${ms},.*/\t[\2] = \"\1\",/p" \
+ ${linux_mount}
printf "};\n"
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 583/677] drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (581 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 582/677] perf beauty: Fix fsconfig generator Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 584/677] drm/amd/pm: fix error code in smu_set_power_limit() Greg Kroah-Hartman
` (100 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Alex Deucher, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 90cb3d8aca1baea9471d28f28d5de1528dd5e424 ]
If the kmemdup() fails then this should return a negative error code
but it currently returns success
Fixes: b4a7db71ea06 ("drm/amdgpu: add per device user friendly xgmi events for vega20")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c
index 19c0a3655228..82e9ecf84352 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c
@@ -519,8 +519,10 @@ static int init_pmu_entry_by_type_and_add(struct amdgpu_pmu_entry *pmu_entry,
pmu_entry->pmu.attr_groups = kmemdup(attr_groups, sizeof(attr_groups),
GFP_KERNEL);
- if (!pmu_entry->pmu.attr_groups)
+ if (!pmu_entry->pmu.attr_groups) {
+ ret = -ENOMEM;
goto err_attr_group;
+ }
snprintf(pmu_name, PMU_NAME_SIZE, "%s_%d", pmu_entry->pmu_file_prefix,
adev_to_drm(pmu_entry->adev)->primary->index);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 584/677] drm/amd/pm: fix error code in smu_set_power_limit()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (582 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 583/677] drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 585/677] MIPS: pci-legacy: stop using of_pci_range_to_resource Greg Kroah-Hartman
` (99 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Alex Deucher, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit bbdfe5aaef3c1d5c5e62fa235ef13f064e4c1c17 ]
We should return -EINVAL instead of success if the "limit" is too high.
Fixes: e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 42c4dbe3e362..ec0037a21331 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -2086,6 +2086,7 @@ int smu_set_power_limit(struct smu_context *smu, uint32_t limit)
dev_err(smu->adev->dev,
"New power limit (%d) is over the max allowed %d\n",
limit, smu->max_power_limit);
+ ret = -EINVAL;
goto out;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 585/677] MIPS: pci-legacy: stop using of_pci_range_to_resource
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (583 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 584/677] drm/amd/pm: fix error code in smu_set_power_limit() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 586/677] powerpc/pseries: extract host bridge from pci_bus prior to bus removal Greg Kroah-Hartman
` (98 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Lipnitskiy, Liviu Dudau,
Thomas Bogendoerfer, Sasha Levin
From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
[ Upstream commit 3ecb9dc1581eebecaee56decac70e35365260866 ]
Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").
Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.
In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set
resource limits")
So just stop using of_pci_range_to_resource, which does not work for
MIPS.
Fixes PCI errors like:
pci_bus 0000:00: root bus resource [io 0xffffffff]
Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/pci/pci-legacy.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
index 39052de915f3..3a909194284a 100644
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
@@ -166,8 +166,13 @@ void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
res = hose->mem_resource;
break;
}
- if (res != NULL)
- of_pci_range_to_resource(&range, node, res);
+ if (res != NULL) {
+ res->name = node->full_name;
+ res->flags = range.flags;
+ res->start = range.cpu_addr;
+ res->end = range.cpu_addr + range.size - 1;
+ res->parent = res->child = res->sibling = NULL;
+ }
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 586/677] powerpc/pseries: extract host bridge from pci_bus prior to bus removal
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (584 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 585/677] MIPS: pci-legacy: stop using of_pci_range_to_resource Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 587/677] iommu/mediatek: Always enable the clk on resume Greg Kroah-Hartman
` (97 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tyrel Datwyler, Michael Ellerman,
Sasha Levin
From: Tyrel Datwyler <tyreld@linux.ibm.com>
[ Upstream commit 38d0b1c9cec71e6d0f3bddef0bbce41d05a3e796 ]
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes: 7340056567e3 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/pci_dlpar.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index f9ae17e8a0f4..a8f9140a24fa 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -50,6 +50,7 @@ EXPORT_SYMBOL_GPL(init_phb_dynamic);
int remove_phb_dynamic(struct pci_controller *phb)
{
struct pci_bus *b = phb->bus;
+ struct pci_host_bridge *host_bridge = to_pci_host_bridge(b->bridge);
struct resource *res;
int rc, i;
@@ -76,7 +77,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
/* Remove the PCI bus and unregister the bridge device from sysfs */
phb->bus = NULL;
pci_remove_bus(b);
- device_unregister(b->bridge);
+ host_bridge->bus = NULL;
+ device_unregister(&host_bridge->dev);
/* Now release the IO resource */
if (res->flags & IORESOURCE_IO)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 587/677] iommu/mediatek: Always enable the clk on resume
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (585 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 586/677] powerpc/pseries: extract host bridge from pci_bus prior to bus removal Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 588/677] mptcp: fix format specifiers for unsigned int Greg Kroah-Hartman
` (96 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dafna Hirschfeld, Yong Wu,
Joerg Roedel, Sasha Levin
From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
[ Upstream commit b34ea31fe013569d42b7e8681ef3f717f77c5b72 ]
In mtk_iommu_runtime_resume always enable the clk, even
if m4u_dom is null. Otherwise the 'suspend' cb might
disable the clk which is already disabled causing the warning:
[ 1.586104] infra_m4u already disabled
[ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8
[ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops)
[ 1.598108] Modules linked in:
[ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69
[ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops)
[ 1.617487] Hardware name: Google Elm (DT)
[ 1.617491] Workqueue: pm pm_runtime_work
[ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops)
[ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
[ 1.659297] pc : clk_core_disable+0xb0/0xb8
[ 1.663475] lr : clk_core_disable+0xb0/0xb8
[ 1.667652] sp : ffff800011b9bbe0
[ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000
[ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98
[ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000
[ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90
[ 1.692189] x21: 000000000000000a x20: ffff0000c0048500
[ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff
[ 1.702804] x17: 0000000000000000 x16: 0000000000000000
[ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000
[ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720
[ 1.718727] x11: 0720072007200720 x10: 0720072007200720
[ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0
[ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328
[ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298
[ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000
[ 1.750572] Call trace:
[ 1.753010] clk_core_disable+0xb0/0xb8
[ 1.756840] clk_core_disable_lock+0x24/0x40
[ 1.761105] clk_disable+0x20/0x30
[ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8
[ 1.769114] pm_generic_runtime_suspend+0x2c/0x48
[ 1.773815] __rpm_callback+0xe0/0x178
[ 1.777559] rpm_callback+0x24/0x88
[ 1.781041] rpm_suspend+0xdc/0x470
[ 1.784523] rpm_idle+0x12c/0x170
[ 1.787831] pm_runtime_work+0xa8/0xc0
[ 1.791573] process_one_work+0x1e8/0x360
[ 1.795580] worker_thread+0x44/0x478
[ 1.799237] kthread+0x150/0x158
[ 1.802460] ret_from_fork+0x10/0x30
[ 1.806034] ---[ end trace 82402920ef64573b ]---
[ 1.810728] ------------[ cut here ]------------
In addition, we now don't need to enable the clock from the
function mtk_iommu_hw_init since it is already enabled by the resume.
Fixes: c0b57581b73b ("iommu/mediatek: Add power-domain operation")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210416105449.4744-1-dafna.hirschfeld@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/mtk_iommu.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6ecc007f07cd..e168a682806a 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -688,13 +688,6 @@ static const struct iommu_ops mtk_iommu_ops = {
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
{
u32 regval;
- int ret;
-
- ret = clk_prepare_enable(data->bclk);
- if (ret) {
- dev_err(data->dev, "Failed to enable iommu bclk(%d)\n", ret);
- return ret;
- }
if (data->plat_data->m4u_plat == M4U_MT8173) {
regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
@@ -760,7 +753,6 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
dev_name(data->dev), (void *)data)) {
writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
- clk_disable_unprepare(data->bclk);
dev_err(data->dev, "Failed @ IRQ-%d Request\n", data->irq);
return -ENODEV;
}
@@ -977,14 +969,19 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
void __iomem *base = data->base;
int ret;
- /* Avoid first resume to affect the default value of registers below. */
- if (!m4u_dom)
- return 0;
ret = clk_prepare_enable(data->bclk);
if (ret) {
dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
return ret;
}
+
+ /*
+ * Uppon first resume, only enable the clk and return, since the values of the
+ * registers are not yet set.
+ */
+ if (!m4u_dom)
+ return 0;
+
writel_relaxed(reg->wr_len_ctrl, base + REG_MMU_WR_LEN_CTRL);
writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 588/677] mptcp: fix format specifiers for unsigned int
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (586 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 587/677] iommu/mediatek: Always enable the clk on resume Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 589/677] powerpc/smp: Reintroduce cpu_core_mask Greg Kroah-Hartman
` (95 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Geliang Tang,
Mat Martineau, David S. Miller, Sasha Levin
From: Geliang Tang <geliangtang@gmail.com>
[ Upstream commit e4b6135134a75f530bd634ea7c168efaf0f9dff3 ]
Some of the sequence numbers are printed as the negative ones in the debug
log:
[ 46.250932] MPTCP: DSS
[ 46.250940] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 46.250948] MPTCP: data_ack=2344892449471675613
[ 46.251012] MPTCP: msk=000000006e157e3f status=10
[ 46.251023] MPTCP: msk=000000006e157e3f snd_data_fin_enable=0 pending=0 snd_nxt=2344892449471700189 write_seq=2344892449471700189
[ 46.251343] MPTCP: msk=00000000ec44a129 ssk=00000000f7abd481 sending dfrag at seq=-1658937016627538668 len=100 already sent=0
[ 46.251360] MPTCP: data_seq=16787807057082012948 subflow_seq=1 data_len=100 dsn64=1
This patch used the format specifier %u instead of %d for the unsigned int
values to fix it.
Fixes: d9ca1de8c0cd ("mptcp: move page frag allocation in mptcp_sendmsg()")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mptcp/protocol.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 4bde960e19dc..5043c7cb0782 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1275,7 +1275,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
int avail_size;
size_t ret = 0;
- pr_debug("msk=%p ssk=%p sending dfrag at seq=%lld len=%d already sent=%d",
+ pr_debug("msk=%p ssk=%p sending dfrag at seq=%llu len=%u already sent=%u",
msk, ssk, dfrag->data_seq, dfrag->data_len, info->sent);
/* compute send limit */
@@ -1693,7 +1693,7 @@ static int mptcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
if (!msk->first_pending)
WRITE_ONCE(msk->first_pending, dfrag);
}
- pr_debug("msk=%p dfrag at seq=%lld len=%d sent=%d new=%d", msk,
+ pr_debug("msk=%p dfrag at seq=%llu len=%u sent=%u new=%d", msk,
dfrag->data_seq, dfrag->data_len, dfrag->already_sent,
!dfrag_collapsed);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 589/677] powerpc/smp: Reintroduce cpu_core_mask
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (587 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 588/677] mptcp: fix format specifiers for unsigned int Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 590/677] KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid Greg Kroah-Hartman
` (94 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Henrique Barboza,
Srikar Dronamraju, Michael Ellerman, Sasha Levin
From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ Upstream commit c47f892d7aa62765bf0689073f75990b4517a4cf ]
Daniel reported that with Commit 4ca234a9cbd7 ("powerpc/smp: Stop
updating cpu_core_mask") QEMU was unable to set single NUMA node SMP
topologies such as:
-smp 8,maxcpus=8,cores=2,threads=2,sockets=2
i.e he expected 2 sockets in one NUMA node.
The above commit helped to reduce boot time on Large Systems for
example 4096 vCPU single socket QEMU instance. PAPR is silent on
having more than one socket within a NUMA node.
cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the
number of sockets is different from the number of NUMA nodes.
One option is to reintroduce cpu_core_mask but use a slightly
different method to arrive at the cpu_core_mask. Previously each CPU's
chip-id would be compared with all other CPU's chip-id to verify if
both the CPUs were related at the chip level. Now if a CPU 'A' is
found related / (unrelated) to another CPU 'B', all the thread
siblings of 'A' and thread siblings of 'B' are automatically marked as
related / (unrelated).
Also if a platform doesn't support ibm,chip-id property, i.e its
cpu_to_chip_id returns -1, cpu_core_map holds a copy of
cpu_cpu_mask().
Fixes: 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask")
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/include/asm/smp.h | 5 +++++
arch/powerpc/kernel/smp.c | 39 ++++++++++++++++++++++++++++------
2 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 7a13bc20f0a0..47081a9e13ca 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -121,6 +121,11 @@ static inline struct cpumask *cpu_sibling_mask(int cpu)
return per_cpu(cpu_sibling_map, cpu);
}
+static inline struct cpumask *cpu_core_mask(int cpu)
+{
+ return per_cpu(cpu_core_map, cpu);
+}
+
static inline struct cpumask *cpu_l2_cache_mask(int cpu)
{
return per_cpu(cpu_l2_cache_map, cpu);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5a4d59a1070d..5c7ce1d50631 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1057,17 +1057,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
local_memory_node(numa_cpu_lookup_table[cpu]));
}
#endif
- /*
- * cpu_core_map is now more updated and exists only since
- * its been exported for long. It only will have a snapshot
- * of cpu_cpu_mask.
- */
- cpumask_copy(per_cpu(cpu_core_map, cpu), cpu_cpu_mask(cpu));
}
/* Init the cpumasks so the boot CPU is related to itself */
cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
cpumask_set_cpu(boot_cpuid, cpu_l2_cache_mask(boot_cpuid));
+ cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
if (has_coregroup_support())
cpumask_set_cpu(boot_cpuid, cpu_coregroup_mask(boot_cpuid));
@@ -1408,6 +1403,9 @@ static void remove_cpu_from_masks(int cpu)
set_cpus_unrelated(cpu, i, cpu_smallcore_mask);
}
+ for_each_cpu(i, cpu_core_mask(cpu))
+ set_cpus_unrelated(cpu, i, cpu_core_mask);
+
if (has_coregroup_support()) {
for_each_cpu(i, cpu_coregroup_mask(cpu))
set_cpus_unrelated(cpu, i, cpu_coregroup_mask);
@@ -1468,8 +1466,11 @@ static void update_coregroup_mask(int cpu, cpumask_var_t *mask)
static void add_cpu_to_masks(int cpu)
{
+ struct cpumask *(*submask_fn)(int) = cpu_sibling_mask;
int first_thread = cpu_first_thread_sibling(cpu);
+ int chip_id = cpu_to_chip_id(cpu);
cpumask_var_t mask;
+ bool ret;
int i;
/*
@@ -1485,12 +1486,36 @@ static void add_cpu_to_masks(int cpu)
add_cpu_to_smallcore_masks(cpu);
/* In CPU-hotplug path, hence use GFP_ATOMIC */
- alloc_cpumask_var_node(&mask, GFP_ATOMIC, cpu_to_node(cpu));
+ ret = alloc_cpumask_var_node(&mask, GFP_ATOMIC, cpu_to_node(cpu));
update_mask_by_l2(cpu, &mask);
if (has_coregroup_support())
update_coregroup_mask(cpu, &mask);
+ if (chip_id == -1 || !ret) {
+ cpumask_copy(per_cpu(cpu_core_map, cpu), cpu_cpu_mask(cpu));
+ goto out;
+ }
+
+ if (shared_caches)
+ submask_fn = cpu_l2_cache_mask;
+
+ /* Update core_mask with all the CPUs that are part of submask */
+ or_cpumasks_related(cpu, cpu, submask_fn, cpu_core_mask);
+
+ /* Skip all CPUs already part of current CPU core mask */
+ cpumask_andnot(mask, cpu_online_mask, cpu_core_mask(cpu));
+
+ for_each_cpu(i, mask) {
+ if (chip_id == cpu_to_chip_id(i)) {
+ or_cpumasks_related(cpu, i, submask_fn, cpu_core_mask);
+ cpumask_andnot(mask, mask, submask_fn(i));
+ } else {
+ cpumask_andnot(mask, mask, cpu_core_mask(i));
+ }
+ }
+
+out:
free_cpumask_var(mask);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 590/677] KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (588 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 589/677] powerpc/smp: Reintroduce cpu_core_mask Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 591/677] rtlwifi: 8821ae: upgrade PHY and RF parameters Greg Kroah-Hartman
` (93 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Edmondson, Paolo Bonzini, Sasha Levin
From: David Edmondson <david.edmondson@oracle.com>
[ Upstream commit d9e46d344e62a0d56fd86a8289db5bed8a57c92e ]
If the VM entry/exit controls for loading/saving MSR_EFER are either
not available (an older processor or explicitly disabled) or not
used (host and guest values are the same), reading GUEST_IA32_EFER
from the VMCS returns an inaccurate value.
Because of this, in dump_vmcs() don't use GUEST_IA32_EFER to decide
whether to print the PDPTRs - always do so if the fields exist.
Fixes: 4eb64dce8d0a ("KVM: x86: dump VMCS on invalid entry")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/vmx/vmx.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index a82b8f7a9d39..db50ee04ad37 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -5792,7 +5792,6 @@ void dump_vmcs(void)
u32 vmentry_ctl, vmexit_ctl;
u32 cpu_based_exec_ctrl, pin_based_exec_ctrl, secondary_exec_control;
unsigned long cr4;
- u64 efer;
if (!dump_invalid_vmcs) {
pr_warn_ratelimited("set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.\n");
@@ -5804,7 +5803,6 @@ void dump_vmcs(void)
cpu_based_exec_ctrl = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
pin_based_exec_ctrl = vmcs_read32(PIN_BASED_VM_EXEC_CONTROL);
cr4 = vmcs_readl(GUEST_CR4);
- efer = vmcs_read64(GUEST_IA32_EFER);
secondary_exec_control = 0;
if (cpu_has_secondary_exec_ctrls())
secondary_exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
@@ -5816,9 +5814,7 @@ void dump_vmcs(void)
pr_err("CR4: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n",
cr4, vmcs_readl(CR4_READ_SHADOW), vmcs_readl(CR4_GUEST_HOST_MASK));
pr_err("CR3 = 0x%016lx\n", vmcs_readl(GUEST_CR3));
- if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT) &&
- (cr4 & X86_CR4_PAE) && !(efer & EFER_LMA))
- {
+ if (cpu_has_vmx_ept()) {
pr_err("PDPTR0 = 0x%016llx PDPTR1 = 0x%016llx\n",
vmcs_read64(GUEST_PDPTR0), vmcs_read64(GUEST_PDPTR1));
pr_err("PDPTR2 = 0x%016llx PDPTR3 = 0x%016llx\n",
@@ -5844,7 +5840,8 @@ void dump_vmcs(void)
if ((vmexit_ctl & (VM_EXIT_SAVE_IA32_PAT | VM_EXIT_SAVE_IA32_EFER)) ||
(vmentry_ctl & (VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_LOAD_IA32_EFER)))
pr_err("EFER = 0x%016llx PAT = 0x%016llx\n",
- efer, vmcs_read64(GUEST_IA32_PAT));
+ vmcs_read64(GUEST_IA32_EFER),
+ vmcs_read64(GUEST_IA32_PAT));
pr_err("DebugCtl = 0x%016llx DebugExceptions = 0x%016lx\n",
vmcs_read64(GUEST_IA32_DEBUGCTL),
vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS));
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 591/677] rtlwifi: 8821ae: upgrade PHY and RF parameters
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (589 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 590/677] KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 592/677] wlcore: fix overlapping snprintf arguments in debugfs Greg Kroah-Hartman
` (92 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ping-Ke Shih, Kai-Heng Feng,
Kalle Valo, Sasha Levin
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit 18fb0bedb5fc2fddc057dbe48b7360a6ffda34b3 ]
The signal strength of 5G is quite low, so user can't connect to an AP far
away. New parameters with new format and its parser are updated by the commit
84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but
some parameters are missing. Use this commit to update to the novel parameters
that use new format.
Fixes: 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../realtek/rtlwifi/rtl8821ae/table.c | 500 +++++++++++++-----
1 file changed, 370 insertions(+), 130 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c
index 27c8a5d96520..fcaaf664cbec 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c
@@ -249,7 +249,7 @@ u32 RTL8821AE_PHY_REG_ARRAY[] = {
0x824, 0x00030FE0,
0x828, 0x00000000,
0x82C, 0x002081DD,
- 0x830, 0x2AAA8E24,
+ 0x830, 0x2AAAEEC8,
0x834, 0x0037A706,
0x838, 0x06489B44,
0x83C, 0x0000095B,
@@ -324,10 +324,10 @@ u32 RTL8821AE_PHY_REG_ARRAY[] = {
0x9D8, 0x00000000,
0x9DC, 0x00000000,
0x9E0, 0x00005D00,
- 0x9E4, 0x00000002,
+ 0x9E4, 0x00000003,
0x9E8, 0x00000001,
0xA00, 0x00D047C8,
- 0xA04, 0x01FF000C,
+ 0xA04, 0x01FF800C,
0xA08, 0x8C8A8300,
0xA0C, 0x2E68000F,
0xA10, 0x9500BB78,
@@ -1320,7 +1320,11 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x083, 0x00021800,
0x084, 0x00028000,
0x085, 0x00048000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
+ 0x086, 0x0009483A,
+ 0xA0000000, 0x00000000,
0x086, 0x00094838,
+ 0xB0000000, 0x00000000,
0x087, 0x00044980,
0x088, 0x00048000,
0x089, 0x0000D480,
@@ -1409,36 +1413,32 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x03C, 0x000CA000,
0x0EF, 0x00000000,
0x0EF, 0x00001100,
- 0xFF0F0104, 0xABCD,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0004ADF3,
0x034, 0x00049DF0,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0004ADF3,
0x034, 0x00049DF0,
- 0xFF0F0404, 0xCDEF,
- 0x034, 0x0004ADF3,
- 0x034, 0x00049DF0,
- 0xFF0F0200, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0004ADF5,
0x034, 0x00049DF2,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0004A0F3,
+ 0x034, 0x000490B1,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0004A0F3,
0x034, 0x000490B1,
- 0xCDCDCDCD, 0xCDCD,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0004ADF5,
+ 0x034, 0x00049DF2,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0004ADF3,
+ 0x034, 0x00049DF0,
+ 0xA0000000, 0x00000000,
0x034, 0x0004ADF7,
0x034, 0x00049DF3,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
- 0x034, 0x00048DED,
- 0x034, 0x00047DEA,
- 0x034, 0x00046DE7,
- 0x034, 0x00045CE9,
- 0x034, 0x00044CE6,
- 0x034, 0x000438C6,
- 0x034, 0x00042886,
- 0x034, 0x00041486,
- 0x034, 0x00040447,
- 0xFF0F0204, 0xCDEF,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00048DED,
0x034, 0x00047DEA,
0x034, 0x00046DE7,
@@ -1448,7 +1448,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00042886,
0x034, 0x00041486,
0x034, 0x00040447,
- 0xFF0F0404, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00048DED,
0x034, 0x00047DEA,
0x034, 0x00046DE7,
@@ -1458,7 +1458,17 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00042886,
0x034, 0x00041486,
0x034, 0x00040447,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x000480AE,
+ 0x034, 0x000470AB,
+ 0x034, 0x0004608B,
+ 0x034, 0x00045069,
+ 0x034, 0x00044048,
+ 0x034, 0x00043045,
+ 0x034, 0x00042026,
+ 0x034, 0x00041023,
+ 0x034, 0x00040002,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x000480AE,
0x034, 0x000470AB,
0x034, 0x0004608B,
@@ -1468,7 +1478,17 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00042026,
0x034, 0x00041023,
0x034, 0x00040002,
- 0xCDCDCDCD, 0xCDCD,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x00048DED,
+ 0x034, 0x00047DEA,
+ 0x034, 0x00046DE7,
+ 0x034, 0x00045CE9,
+ 0x034, 0x00044CE6,
+ 0x034, 0x000438C6,
+ 0x034, 0x00042886,
+ 0x034, 0x00041486,
+ 0x034, 0x00040447,
+ 0xA0000000, 0x00000000,
0x034, 0x00048DEF,
0x034, 0x00047DEC,
0x034, 0x00046DE9,
@@ -1478,38 +1498,36 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x0004248A,
0x034, 0x0004108D,
0x034, 0x0004008A,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0200, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000210, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0002ADF4,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0002A0F3,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0002A0F3,
- 0xCDCDCDCD, 0xCDCD,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0002ADF4,
+ 0xA0000000, 0x00000000,
0x034, 0x0002ADF7,
- 0xFF0F0200, 0xDEAD,
- 0xFF0F0104, 0xABCD,
- 0x034, 0x00029DF4,
- 0xFF0F0204, 0xCDEF,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00029DF4,
- 0xFF0F0404, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00029DF4,
- 0xFF0F0200, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00029DF1,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x000290F0,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x000290F0,
- 0xCDCDCDCD, 0xCDCD,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x00029DF1,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x00029DF4,
+ 0xA0000000, 0x00000000,
0x034, 0x00029DF2,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
- 0x034, 0x00028DF1,
- 0x034, 0x00027DEE,
- 0x034, 0x00026DEB,
- 0x034, 0x00025CEC,
- 0x034, 0x00024CE9,
- 0x034, 0x000238CA,
- 0x034, 0x00022889,
- 0x034, 0x00021489,
- 0x034, 0x0002044A,
- 0xFF0F0204, 0xCDEF,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00028DF1,
0x034, 0x00027DEE,
0x034, 0x00026DEB,
@@ -1519,7 +1537,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00022889,
0x034, 0x00021489,
0x034, 0x0002044A,
- 0xFF0F0404, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00028DF1,
0x034, 0x00027DEE,
0x034, 0x00026DEB,
@@ -1529,7 +1547,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00022889,
0x034, 0x00021489,
0x034, 0x0002044A,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x000280AF,
0x034, 0x000270AC,
0x034, 0x0002608B,
@@ -1539,7 +1557,27 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00022026,
0x034, 0x00021023,
0x034, 0x00020002,
- 0xCDCDCDCD, 0xCDCD,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x000280AF,
+ 0x034, 0x000270AC,
+ 0x034, 0x0002608B,
+ 0x034, 0x00025069,
+ 0x034, 0x00024048,
+ 0x034, 0x00023045,
+ 0x034, 0x00022026,
+ 0x034, 0x00021023,
+ 0x034, 0x00020002,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x00028DF1,
+ 0x034, 0x00027DEE,
+ 0x034, 0x00026DEB,
+ 0x034, 0x00025CEC,
+ 0x034, 0x00024CE9,
+ 0x034, 0x000238CA,
+ 0x034, 0x00022889,
+ 0x034, 0x00021489,
+ 0x034, 0x0002044A,
+ 0xA0000000, 0x00000000,
0x034, 0x00028DEE,
0x034, 0x00027DEB,
0x034, 0x00026CCD,
@@ -1549,27 +1587,24 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00022849,
0x034, 0x00021449,
0x034, 0x0002004D,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F02C0, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x8000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0000A0D7,
+ 0x034, 0x000090D3,
+ 0x034, 0x000080B1,
+ 0x034, 0x000070AE,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0000A0D7,
0x034, 0x000090D3,
0x034, 0x000080B1,
0x034, 0x000070AE,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x034, 0x0000ADF7,
0x034, 0x00009DF4,
0x034, 0x00008DF1,
0x034, 0x00007DEE,
- 0xFF0F02C0, 0xDEAD,
- 0xFF0F0104, 0xABCD,
- 0x034, 0x00006DEB,
- 0x034, 0x00005CEC,
- 0x034, 0x00004CE9,
- 0x034, 0x000038CA,
- 0x034, 0x00002889,
- 0x034, 0x00001489,
- 0x034, 0x0000044A,
- 0xFF0F0204, 0xCDEF,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00006DEB,
0x034, 0x00005CEC,
0x034, 0x00004CE9,
@@ -1577,7 +1612,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00002889,
0x034, 0x00001489,
0x034, 0x0000044A,
- 0xFF0F0404, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x00006DEB,
0x034, 0x00005CEC,
0x034, 0x00004CE9,
@@ -1585,7 +1620,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00002889,
0x034, 0x00001489,
0x034, 0x0000044A,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
0x034, 0x0000608D,
0x034, 0x0000506B,
0x034, 0x0000404A,
@@ -1593,7 +1628,23 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00002044,
0x034, 0x00001025,
0x034, 0x00000004,
- 0xCDCDCDCD, 0xCDCD,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x0000608D,
+ 0x034, 0x0000506B,
+ 0x034, 0x0000404A,
+ 0x034, 0x00003047,
+ 0x034, 0x00002044,
+ 0x034, 0x00001025,
+ 0x034, 0x00000004,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x034, 0x00006DEB,
+ 0x034, 0x00005CEC,
+ 0x034, 0x00004CE9,
+ 0x034, 0x000038CA,
+ 0x034, 0x00002889,
+ 0x034, 0x00001489,
+ 0x034, 0x0000044A,
+ 0xA0000000, 0x00000000,
0x034, 0x00006DCD,
0x034, 0x00005CCD,
0x034, 0x00004CCA,
@@ -1601,11 +1652,11 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x034, 0x00002888,
0x034, 0x00001488,
0x034, 0x00000486,
- 0xFF0F0104, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x0EF, 0x00000000,
0x018, 0x0001712A,
0x0EF, 0x00000040,
- 0xFF0F0104, 0xABCD,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x035, 0x00000187,
0x035, 0x00008187,
0x035, 0x00010187,
@@ -1615,7 +1666,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x035, 0x00040188,
0x035, 0x00048188,
0x035, 0x00050188,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x035, 0x00000187,
0x035, 0x00008187,
0x035, 0x00010187,
@@ -1625,7 +1676,37 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x035, 0x00040188,
0x035, 0x00048188,
0x035, 0x00050188,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x035, 0x00000128,
+ 0x035, 0x00008128,
+ 0x035, 0x00010128,
+ 0x035, 0x000201C8,
+ 0x035, 0x000281C8,
+ 0x035, 0x000301C8,
+ 0x035, 0x000401C8,
+ 0x035, 0x000481C8,
+ 0x035, 0x000501C8,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x035, 0x00000145,
+ 0x035, 0x00008145,
+ 0x035, 0x00010145,
+ 0x035, 0x00020196,
+ 0x035, 0x00028196,
+ 0x035, 0x00030196,
+ 0x035, 0x000401C7,
+ 0x035, 0x000481C7,
+ 0x035, 0x000501C7,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x035, 0x00000128,
+ 0x035, 0x00008128,
+ 0x035, 0x00010128,
+ 0x035, 0x000201C8,
+ 0x035, 0x000281C8,
+ 0x035, 0x000301C8,
+ 0x035, 0x000401C8,
+ 0x035, 0x000481C8,
+ 0x035, 0x000501C8,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x035, 0x00000187,
0x035, 0x00008187,
0x035, 0x00010187,
@@ -1635,7 +1716,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x035, 0x00040188,
0x035, 0x00048188,
0x035, 0x00050188,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x035, 0x00000145,
0x035, 0x00008145,
0x035, 0x00010145,
@@ -1645,11 +1726,11 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x035, 0x000401C7,
0x035, 0x000481C7,
0x035, 0x000501C7,
- 0xFF0F0104, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x0EF, 0x00000000,
0x018, 0x0001712A,
0x0EF, 0x00000010,
- 0xFF0F0104, 0xABCD,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x036, 0x00085733,
0x036, 0x0008D733,
0x036, 0x00095733,
@@ -1662,7 +1743,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x036, 0x000CE4B4,
0x036, 0x000D64B4,
0x036, 0x000DE4B4,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x036, 0x00085733,
0x036, 0x0008D733,
0x036, 0x00095733,
@@ -1675,7 +1756,46 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x036, 0x000CE4B4,
0x036, 0x000D64B4,
0x036, 0x000DE4B4,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x036, 0x000063B5,
+ 0x036, 0x0000E3B5,
+ 0x036, 0x000163B5,
+ 0x036, 0x0001E3B5,
+ 0x036, 0x000263B5,
+ 0x036, 0x0002E3B5,
+ 0x036, 0x000363B5,
+ 0x036, 0x0003E3B5,
+ 0x036, 0x000463B5,
+ 0x036, 0x0004E3B5,
+ 0x036, 0x000563B5,
+ 0x036, 0x0005E3B5,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x036, 0x000056B3,
+ 0x036, 0x0000D6B3,
+ 0x036, 0x000156B3,
+ 0x036, 0x0001D6B3,
+ 0x036, 0x00026634,
+ 0x036, 0x0002E634,
+ 0x036, 0x00036634,
+ 0x036, 0x0003E634,
+ 0x036, 0x000467B4,
+ 0x036, 0x0004E7B4,
+ 0x036, 0x000567B4,
+ 0x036, 0x0005E7B4,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x036, 0x000063B5,
+ 0x036, 0x0000E3B5,
+ 0x036, 0x000163B5,
+ 0x036, 0x0001E3B5,
+ 0x036, 0x000263B5,
+ 0x036, 0x0002E3B5,
+ 0x036, 0x000363B5,
+ 0x036, 0x0003E3B5,
+ 0x036, 0x000463B5,
+ 0x036, 0x0004E3B5,
+ 0x036, 0x000563B5,
+ 0x036, 0x0005E3B5,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x036, 0x00085733,
0x036, 0x0008D733,
0x036, 0x00095733,
@@ -1688,7 +1808,7 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x036, 0x000CE4B4,
0x036, 0x000D64B4,
0x036, 0x000DE4B4,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x036, 0x000056B3,
0x036, 0x0000D6B3,
0x036, 0x000156B3,
@@ -1701,103 +1821,162 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x036, 0x0004E7B4,
0x036, 0x000567B4,
0x036, 0x0005E7B4,
- 0xFF0F0104, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x0EF, 0x00000000,
0x0EF, 0x00000008,
- 0xFF0F0104, 0xABCD,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x000001C8,
0x03C, 0x00000492,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x000001C8,
0x03C, 0x00000492,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x000001B6,
+ 0x03C, 0x00000492,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x0000022A,
+ 0x03C, 0x00000594,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x000001B6,
+ 0x03C, 0x00000492,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x000001C8,
0x03C, 0x00000492,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x03C, 0x0000022A,
0x03C, 0x00000594,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x00000800,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x00000800,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x00000800,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
0x03C, 0x00000820,
- 0xCDCDCDCD, 0xCDCD,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x00000820,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x00000800,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x03C, 0x00000800,
+ 0xA0000000, 0x00000000,
0x03C, 0x00000900,
- 0xFF0F0104, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x0EF, 0x00000000,
0x018, 0x0001712A,
0x0EF, 0x00000002,
- 0xFF0F0104, 0xABCD,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x008, 0x0004E400,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x008, 0x0004E400,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x008, 0x00002000,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x008, 0x00002000,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x008, 0x00002000,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x008, 0x00002000,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x008, 0x0004E400,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x008, 0x00002000,
- 0xFF0F0104, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x0EF, 0x00000000,
0x0DF, 0x000000C0,
- 0x01F, 0x00040064,
- 0xFF0F0104, 0xABCD,
+ 0x01F, 0x00000064,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x058, 0x000A7284,
0x059, 0x000600EC,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x058, 0x000A7284,
0x059, 0x000600EC,
- 0xFF0F0404, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x058, 0x00081184,
+ 0x059, 0x0006016C,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x058, 0x00081184,
+ 0x059, 0x0006016C,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x058, 0x00081184,
+ 0x059, 0x0006016C,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x058, 0x000A7284,
0x059, 0x000600EC,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x058, 0x00081184,
0x059, 0x0006016C,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x061, 0x000E8D73,
0x062, 0x00093FC5,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x061, 0x000E8D73,
0x062, 0x00093FC5,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x061, 0x000EFD83,
+ 0x062, 0x00093FCC,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x061, 0x000EAD53,
+ 0x062, 0x00093BC4,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x061, 0x000EFD83,
+ 0x062, 0x00093FCC,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x061, 0x000E8D73,
0x062, 0x00093FC5,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x061, 0x000EAD53,
0x062, 0x00093BC4,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
0x063, 0x000110E9,
- 0xFF0F0204, 0xCDEF,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
0x063, 0x000110E9,
- 0xFF0F0404, 0xCDEF,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
+ 0x063, 0x000110EB,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
0x063, 0x000110E9,
- 0xFF0F0200, 0xCDEF,
- 0x063, 0x000710E9,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x063, 0x000110E9,
- 0xCDCDCDCD, 0xCDCD,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x063, 0x000110EB,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
+ 0x063, 0x000110E9,
+ 0xA0000000, 0x00000000,
0x063, 0x000714E9,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0104, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
+ 0x064, 0x0001C27C,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
+ 0x064, 0x0001C27C,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
0x064, 0x0001C27C,
- 0xFF0F0204, 0xCDEF,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x064, 0x0001C67C,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
0x064, 0x0001C27C,
- 0xFF0F0404, 0xCDEF,
+ 0x90000410, 0x00000000, 0x40000000, 0x00000000,
0x064, 0x0001C27C,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x064, 0x0001C67C,
- 0xFF0F0104, 0xDEAD,
- 0xFF0F0200, 0xABCD,
+ 0xB0000000, 0x00000000,
+ 0x80000111, 0x00000000, 0x40000000, 0x00000000,
+ 0x065, 0x00091016,
+ 0x90000110, 0x00000000, 0x40000000, 0x00000000,
+ 0x065, 0x00091016,
+ 0x90000210, 0x00000000, 0x40000000, 0x00000000,
0x065, 0x00093016,
- 0xFF0F02C0, 0xCDEF,
+ 0x9000020c, 0x00000000, 0x40000000, 0x00000000,
0x065, 0x00093015,
- 0xCDCDCDCD, 0xCDCD,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
+ 0x065, 0x00093015,
+ 0x90000200, 0x00000000, 0x40000000, 0x00000000,
+ 0x065, 0x00093016,
+ 0xA0000000, 0x00000000,
0x065, 0x00091016,
- 0xFF0F0200, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x018, 0x00000006,
0x0EF, 0x00002000,
0x03B, 0x0003824B,
@@ -1895,9 +2074,10 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
0x0B4, 0x0001214C,
0x0B7, 0x0003000C,
0x01C, 0x000539D2,
+ 0x0C4, 0x000AFE00,
0x018, 0x0001F12A,
- 0x0FE, 0x00000000,
- 0x0FE, 0x00000000,
+ 0xFFE, 0x00000000,
+ 0xFFE, 0x00000000,
0x018, 0x0001712A,
};
@@ -2017,6 +2197,7 @@ u32 RTL8812AE_MAC_REG_ARRAY[] = {
u32 RTL8812AE_MAC_1T_ARRAYLEN = ARRAY_SIZE(RTL8812AE_MAC_REG_ARRAY);
u32 RTL8821AE_MAC_REG_ARRAY[] = {
+ 0x421, 0x0000000F,
0x428, 0x0000000A,
0x429, 0x00000010,
0x430, 0x00000000,
@@ -2485,7 +2666,7 @@ u32 RTL8821AE_AGC_TAB_ARRAY[] = {
0x81C, 0xA6360001,
0x81C, 0xA5380001,
0x81C, 0xA43A0001,
- 0x81C, 0xA33C0001,
+ 0x81C, 0x683C0001,
0x81C, 0x673E0001,
0x81C, 0x66400001,
0x81C, 0x65420001,
@@ -2519,7 +2700,66 @@ u32 RTL8821AE_AGC_TAB_ARRAY[] = {
0x81C, 0x017A0001,
0x81C, 0x017C0001,
0x81C, 0x017E0001,
- 0xFF0F02C0, 0xABCD,
+ 0x8000020c, 0x00000000, 0x40000000, 0x00000000,
+ 0x81C, 0xFB000101,
+ 0x81C, 0xFA020101,
+ 0x81C, 0xF9040101,
+ 0x81C, 0xF8060101,
+ 0x81C, 0xF7080101,
+ 0x81C, 0xF60A0101,
+ 0x81C, 0xF50C0101,
+ 0x81C, 0xF40E0101,
+ 0x81C, 0xF3100101,
+ 0x81C, 0xF2120101,
+ 0x81C, 0xF1140101,
+ 0x81C, 0xF0160101,
+ 0x81C, 0xEF180101,
+ 0x81C, 0xEE1A0101,
+ 0x81C, 0xED1C0101,
+ 0x81C, 0xEC1E0101,
+ 0x81C, 0xEB200101,
+ 0x81C, 0xEA220101,
+ 0x81C, 0xE9240101,
+ 0x81C, 0xE8260101,
+ 0x81C, 0xE7280101,
+ 0x81C, 0xE62A0101,
+ 0x81C, 0xE52C0101,
+ 0x81C, 0xE42E0101,
+ 0x81C, 0xE3300101,
+ 0x81C, 0xA5320101,
+ 0x81C, 0xA4340101,
+ 0x81C, 0xA3360101,
+ 0x81C, 0x87380101,
+ 0x81C, 0x863A0101,
+ 0x81C, 0x853C0101,
+ 0x81C, 0x843E0101,
+ 0x81C, 0x69400101,
+ 0x81C, 0x68420101,
+ 0x81C, 0x67440101,
+ 0x81C, 0x66460101,
+ 0x81C, 0x49480101,
+ 0x81C, 0x484A0101,
+ 0x81C, 0x474C0101,
+ 0x81C, 0x2A4E0101,
+ 0x81C, 0x29500101,
+ 0x81C, 0x28520101,
+ 0x81C, 0x27540101,
+ 0x81C, 0x26560101,
+ 0x81C, 0x25580101,
+ 0x81C, 0x245A0101,
+ 0x81C, 0x235C0101,
+ 0x81C, 0x055E0101,
+ 0x81C, 0x04600101,
+ 0x81C, 0x03620101,
+ 0x81C, 0x02640101,
+ 0x81C, 0x01660101,
+ 0x81C, 0x01680101,
+ 0x81C, 0x016A0101,
+ 0x81C, 0x016C0101,
+ 0x81C, 0x016E0101,
+ 0x81C, 0x01700101,
+ 0x81C, 0x01720101,
+ 0x9000040c, 0x00000000, 0x40000000, 0x00000000,
0x81C, 0xFB000101,
0x81C, 0xFA020101,
0x81C, 0xF9040101,
@@ -2578,7 +2818,7 @@ u32 RTL8821AE_AGC_TAB_ARRAY[] = {
0x81C, 0x016E0101,
0x81C, 0x01700101,
0x81C, 0x01720101,
- 0xCDCDCDCD, 0xCDCD,
+ 0xA0000000, 0x00000000,
0x81C, 0xFF000101,
0x81C, 0xFF020101,
0x81C, 0xFE040101,
@@ -2637,7 +2877,7 @@ u32 RTL8821AE_AGC_TAB_ARRAY[] = {
0x81C, 0x046E0101,
0x81C, 0x03700101,
0x81C, 0x02720101,
- 0xFF0F02C0, 0xDEAD,
+ 0xB0000000, 0x00000000,
0x81C, 0x01740101,
0x81C, 0x01760101,
0x81C, 0x01780101,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 592/677] wlcore: fix overlapping snprintf arguments in debugfs
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (590 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 591/677] rtlwifi: 8821ae: upgrade PHY and RF parameters Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 593/677] i2c: sh7760: fix IRQ error path Greg Kroah-Hartman
` (91 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Kalle Valo, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 7b0e2c4f6be3ec68bf807c84e985e81c21404cd1 ]
gcc complains about undefined behavior in calling snprintf()
with the same buffer as input and output:
drivers/net/wireless/ti/wl18xx/debugfs.c: In function 'diversity_num_of_packets_per_ant_read':
drivers/net/wireless/ti/wl18xx/../wlcore/debugfs.h:86:3: error: 'snprintf' argument 4 overlaps destination object 'buf' [-Werror=restrict]
86 | snprintf(buf, sizeof(buf), "%s[%d] = %d\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
87 | buf, i, stats->sub.name[i]); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:24:2: note: in expansion of macro 'DEBUGFS_FWSTATS_FILE_ARRAY'
24 | DEBUGFS_FWSTATS_FILE_ARRAY(a, b, c, wl18xx_acx_statistics)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:159:1: note: in expansion of macro 'WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY'
159 | WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(diversity, num_of_packets_per_ant,
There are probably other ways of handling the debugfs file, without
using on-stack buffers, but a simple workaround here is to remember the
current position in the buffer and just keep printing in there.
Fixes: bcca1bbdd412 ("wlcore: add debugfs macro to help print fw statistics arrays")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210323125723.1961432-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ti/wlcore/boot.c | 13 ++++++++-----
drivers/net/wireless/ti/wlcore/debugfs.h | 7 ++++---
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index e14d88e558f0..85abd0a2d1c9 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -72,6 +72,7 @@ static int wlcore_validate_fw_ver(struct wl1271 *wl)
unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
wl->min_mr_fw_ver : wl->min_sr_fw_ver;
char min_fw_str[32] = "";
+ int off = 0;
int i;
/* the chip must be exactly equal */
@@ -105,13 +106,15 @@ static int wlcore_validate_fw_ver(struct wl1271 *wl)
return 0;
fail:
- for (i = 0; i < NUM_FW_VER; i++)
+ for (i = 0; i < NUM_FW_VER && off < sizeof(min_fw_str); i++)
if (min_ver[i] == WLCORE_FW_VER_IGNORE)
- snprintf(min_fw_str, sizeof(min_fw_str),
- "%s*.", min_fw_str);
+ off += snprintf(min_fw_str + off,
+ sizeof(min_fw_str) - off,
+ "*.");
else
- snprintf(min_fw_str, sizeof(min_fw_str),
- "%s%u.", min_fw_str, min_ver[i]);
+ off += snprintf(min_fw_str + off,
+ sizeof(min_fw_str) - off,
+ "%u.", min_ver[i]);
wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is invalid.\n"
"Please use at least FW %s\n"
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.h b/drivers/net/wireless/ti/wlcore/debugfs.h
index b143293e694f..715edfa5f89f 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.h
+++ b/drivers/net/wireless/ti/wlcore/debugfs.h
@@ -78,13 +78,14 @@ static ssize_t sub## _ ##name## _read(struct file *file, \
struct wl1271 *wl = file->private_data; \
struct struct_type *stats = wl->stats.fw_stats; \
char buf[DEBUGFS_FORMAT_BUFFER_SIZE] = ""; \
+ int pos = 0; \
int i; \
\
wl1271_debugfs_update_stats(wl); \
\
- for (i = 0; i < len; i++) \
- snprintf(buf, sizeof(buf), "%s[%d] = %d\n", \
- buf, i, stats->sub.name[i]); \
+ for (i = 0; i < len && pos < sizeof(buf); i++) \
+ pos += snprintf(buf + pos, sizeof(buf), \
+ "[%d] = %d\n", i, stats->sub.name[i]); \
\
return wl1271_format_buffer(userbuf, count, ppos, "%s", buf); \
} \
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 593/677] i2c: sh7760: fix IRQ error path
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (591 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 592/677] wlcore: fix overlapping snprintf arguments in debugfs Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 594/677] i2c: mediatek: Fix wrong dma sync flag Greg Kroah-Hartman
` (90 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Wolfram Sang, Sasha Levin
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>
[ Upstream commit 92dfb27240fea2776f61c5422472cb6defca7767 ]
While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used. Use a proper
*goto* instead!
Fixes: e5b2e3e74201 ("i2c: sh7760: add IRQ check")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-sh7760.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index c79c9f542c5a..319d1fa617c8 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -473,7 +473,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
ret = platform_get_irq(pdev, 0);
if (ret < 0)
- return ret;
+ goto out3;
id->irq = ret;
id->adap.nr = pdev->id;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 594/677] i2c: mediatek: Fix wrong dma sync flag
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (592 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 593/677] i2c: sh7760: fix IRQ error path Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 595/677] mwl8k: Fix a double Free in mwl8k_probe_hw Greg Kroah-Hartman
` (89 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qii Wang, Wolfram Sang, Sasha Levin
From: Qii Wang <qii.wang@mediatek.com>
[ Upstream commit 3186b880447ad3cc9b6487fa626a71d64b831524 ]
The right flag is apdma_sync when apdma remove hand-shake signel.
Fixes: 05f6f7271a38 ("i2c: mediatek: Fix apdma and i2c hand-shake timeout")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2ffd2f354d0a..86f70c751319 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -479,7 +479,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
- if (i2c->dev_comp->dma_sync) {
+ if (i2c->dev_comp->apdma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
udelay(10);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 595/677] mwl8k: Fix a double Free in mwl8k_probe_hw
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (593 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 594/677] i2c: mediatek: Fix wrong dma sync flag Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 596/677] netfilter: nft_payload: fix C-VLAN offload support Greg Kroah-Hartman
` (88 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Kalle Valo, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit a8e083ee8e2a6c94c29733835adae8bf5b832748 ]
In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).
Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().
My patch set txq->txd to NULL after the first free to avoid the
double free.
Fixes: a66098daacee2 ("mwl8k: Marvell TOPDOG wireless driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402182627.4256-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/mwl8k.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/marvell/mwl8k.c b/drivers/net/wireless/marvell/mwl8k.c
index c9f8c056aa51..84b32a5f01ee 100644
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -1473,6 +1473,7 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index)
if (txq->skb == NULL) {
dma_free_coherent(&priv->pdev->dev, size, txq->txd,
txq->txd_dma);
+ txq->txd = NULL;
return -ENOMEM;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 596/677] netfilter: nft_payload: fix C-VLAN offload support
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (594 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 595/677] mwl8k: Fix a double Free in mwl8k_probe_hw Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 597/677] netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector Greg Kroah-Hartman
` (87 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Sasha Levin
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit 14c20643ef9457679cc6934d77adc24296505214 ]
- add another struct flow_dissector_key_vlan for C-VLAN
- update layer 3 dependency to allow to match on IPv4/IPv6
Fixes: 89d8fd44abfb ("netfilter: nft_payload: add C-VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/netfilter/nf_tables_offload.h | 1 +
net/netfilter/nft_payload.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/include/net/netfilter/nf_tables_offload.h b/include/net/netfilter/nf_tables_offload.h
index 1d34fe154fe0..b4d080061399 100644
--- a/include/net/netfilter/nf_tables_offload.h
+++ b/include/net/netfilter/nf_tables_offload.h
@@ -45,6 +45,7 @@ struct nft_flow_key {
struct flow_dissector_key_ports tp;
struct flow_dissector_key_ip ip;
struct flow_dissector_key_vlan vlan;
+ struct flow_dissector_key_vlan cvlan;
struct flow_dissector_key_eth_addrs eth_addrs;
struct flow_dissector_key_meta meta;
} __aligned(BITS_PER_LONG / 8); /* Ensure that we can do comparisons as longs. */
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index cb1c8c231880..a990f37e0a60 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -241,7 +241,7 @@ static int nft_payload_offload_ll(struct nft_offload_ctx *ctx,
if (!nft_payload_offload_mask(reg, priv->len, sizeof(__be16)))
return -EOPNOTSUPP;
- NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_CVLAN, vlan,
+ NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_CVLAN, cvlan,
vlan_tci, sizeof(__be16), reg);
break;
case offsetof(struct vlan_ethhdr, h_vlan_encapsulated_proto) +
@@ -249,8 +249,9 @@ static int nft_payload_offload_ll(struct nft_offload_ctx *ctx,
if (!nft_payload_offload_mask(reg, priv->len, sizeof(__be16)))
return -EOPNOTSUPP;
- NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_CVLAN, vlan,
+ NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_CVLAN, cvlan,
vlan_tpid, sizeof(__be16), reg);
+ nft_offload_set_dependency(ctx, NFT_OFFLOAD_DEP_NETWORK);
break;
default:
return -EOPNOTSUPP;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 597/677] netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (595 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 596/677] netfilter: nft_payload: fix C-VLAN offload support Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 598/677] netfilter: nftables_offload: special ethertype handling for VLAN Greg Kroah-Hartman
` (86 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Sasha Levin
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit ff4d90a89d3d4d9814e0a2696509a7d495be4163 ]
The flow dissector representation expects the VLAN id in host byteorder.
Add the NFT_OFFLOAD_F_NETWORK2HOST flag to swap the bytes from nft_cmp.
Fixes: a82055af5959 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/netfilter/nf_tables_offload.h | 11 +++++-
net/netfilter/nft_cmp.c | 41 +++++++++++++++++++++--
net/netfilter/nft_payload.c | 10 +++---
3 files changed, 55 insertions(+), 7 deletions(-)
diff --git a/include/net/netfilter/nf_tables_offload.h b/include/net/netfilter/nf_tables_offload.h
index b4d080061399..434a6158852f 100644
--- a/include/net/netfilter/nf_tables_offload.h
+++ b/include/net/netfilter/nf_tables_offload.h
@@ -4,11 +4,16 @@
#include <net/flow_offload.h>
#include <net/netfilter/nf_tables.h>
+enum nft_offload_reg_flags {
+ NFT_OFFLOAD_F_NETWORK2HOST = (1 << 0),
+};
+
struct nft_offload_reg {
u32 key;
u32 len;
u32 base_offset;
u32 offset;
+ u32 flags;
struct nft_data data;
struct nft_data mask;
};
@@ -72,13 +77,17 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net, const struct nft_rul
void nft_flow_rule_destroy(struct nft_flow_rule *flow);
int nft_flow_rule_offload_commit(struct net *net);
-#define NFT_OFFLOAD_MATCH(__key, __base, __field, __len, __reg) \
+#define NFT_OFFLOAD_MATCH_FLAGS(__key, __base, __field, __len, __reg, __flags) \
(__reg)->base_offset = \
offsetof(struct nft_flow_key, __base); \
(__reg)->offset = \
offsetof(struct nft_flow_key, __base.__field); \
(__reg)->len = __len; \
(__reg)->key = __key; \
+ (__reg)->flags = __flags;
+
+#define NFT_OFFLOAD_MATCH(__key, __base, __field, __len, __reg) \
+ NFT_OFFLOAD_MATCH_FLAGS(__key, __base, __field, __len, __reg, 0)
#define NFT_OFFLOAD_MATCH_EXACT(__key, __base, __field, __len, __reg) \
NFT_OFFLOAD_MATCH(__key, __base, __field, __len, __reg) \
diff --git a/net/netfilter/nft_cmp.c b/net/netfilter/nft_cmp.c
index eb6a43a180bb..47b6d05f1ae6 100644
--- a/net/netfilter/nft_cmp.c
+++ b/net/netfilter/nft_cmp.c
@@ -114,19 +114,56 @@ nla_put_failure:
return -1;
}
+union nft_cmp_offload_data {
+ u16 val16;
+ u32 val32;
+ u64 val64;
+};
+
+static void nft_payload_n2h(union nft_cmp_offload_data *data,
+ const u8 *val, u32 len)
+{
+ switch (len) {
+ case 2:
+ data->val16 = ntohs(*((u16 *)val));
+ break;
+ case 4:
+ data->val32 = ntohl(*((u32 *)val));
+ break;
+ case 8:
+ data->val64 = be64_to_cpu(*((u64 *)val));
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+}
+
static int __nft_cmp_offload(struct nft_offload_ctx *ctx,
struct nft_flow_rule *flow,
const struct nft_cmp_expr *priv)
{
struct nft_offload_reg *reg = &ctx->regs[priv->sreg];
+ union nft_cmp_offload_data _data, _datamask;
u8 *mask = (u8 *)&flow->match.mask;
u8 *key = (u8 *)&flow->match.key;
+ u8 *data, *datamask;
if (priv->op != NFT_CMP_EQ || priv->len > reg->len)
return -EOPNOTSUPP;
- memcpy(key + reg->offset, &priv->data, reg->len);
- memcpy(mask + reg->offset, ®->mask, reg->len);
+ if (reg->flags & NFT_OFFLOAD_F_NETWORK2HOST) {
+ nft_payload_n2h(&_data, (u8 *)&priv->data, reg->len);
+ nft_payload_n2h(&_datamask, (u8 *)®->mask, reg->len);
+ data = (u8 *)&_data;
+ datamask = (u8 *)&_datamask;
+ } else {
+ data = (u8 *)&priv->data;
+ datamask = (u8 *)®->mask;
+ }
+
+ memcpy(key + reg->offset, data, reg->len);
+ memcpy(mask + reg->offset, datamask, reg->len);
flow->match.dissector.used_keys |= BIT(reg->key);
flow->match.dissector.offset[reg->key] = reg->base_offset;
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index a990f37e0a60..501c5b24cc39 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -226,8 +226,9 @@ static int nft_payload_offload_ll(struct nft_offload_ctx *ctx,
if (!nft_payload_offload_mask(reg, priv->len, sizeof(__be16)))
return -EOPNOTSUPP;
- NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_VLAN, vlan,
- vlan_tci, sizeof(__be16), reg);
+ NFT_OFFLOAD_MATCH_FLAGS(FLOW_DISSECTOR_KEY_VLAN, vlan,
+ vlan_tci, sizeof(__be16), reg,
+ NFT_OFFLOAD_F_NETWORK2HOST);
break;
case offsetof(struct vlan_ethhdr, h_vlan_encapsulated_proto):
if (!nft_payload_offload_mask(reg, priv->len, sizeof(__be16)))
@@ -241,8 +242,9 @@ static int nft_payload_offload_ll(struct nft_offload_ctx *ctx,
if (!nft_payload_offload_mask(reg, priv->len, sizeof(__be16)))
return -EOPNOTSUPP;
- NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_CVLAN, cvlan,
- vlan_tci, sizeof(__be16), reg);
+ NFT_OFFLOAD_MATCH_FLAGS(FLOW_DISSECTOR_KEY_CVLAN, cvlan,
+ vlan_tci, sizeof(__be16), reg,
+ NFT_OFFLOAD_F_NETWORK2HOST);
break;
case offsetof(struct vlan_ethhdr, h_vlan_encapsulated_proto) +
sizeof(struct vlan_hdr):
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 598/677] netfilter: nftables_offload: special ethertype handling for VLAN
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (596 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 597/677] netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 599/677] vsock/vmci: log once the failed queue pair allocation Greg Kroah-Hartman
` (85 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Sasha Levin
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit 783003f3bb8a565326e89d18bbd948ad8ffc816a ]
The nftables offload parser sets FLOW_DISSECTOR_KEY_BASIC .n_proto to the
ethertype field in the ethertype frame. However:
- FLOW_DISSECTOR_KEY_BASIC .n_proto field always stores either IPv4 or IPv6
ethertypes.
- FLOW_DISSECTOR_KEY_VLAN .vlan_tpid stores either the 802.1q and 802.1ad
ethertypes. Same as for FLOW_DISSECTOR_KEY_CVLAN.
This function adjusts the flow dissector to handle two scenarios:
1) FLOW_DISSECTOR_KEY_VLAN .vlan_tpid is set to 802.1q or 802.1ad.
Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the
FLOW_DISSECTOR_KEY_CVLAN .tpid
- the original FLOW_DISSECTOR_KEY_CVLAN .tpid to the .n_proto field.
2) .n_proto is set to 802.1q or 802.1ad. Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the .n_proto field.
Fixes: a82055af5959 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_offload.c | 44 +++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/net/netfilter/nf_tables_offload.c b/net/netfilter/nf_tables_offload.c
index 9ae14270c543..2b00f7f47693 100644
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -45,6 +45,48 @@ void nft_flow_rule_set_addr_type(struct nft_flow_rule *flow,
offsetof(struct nft_flow_key, control);
}
+struct nft_offload_ethertype {
+ __be16 value;
+ __be16 mask;
+};
+
+static void nft_flow_rule_transfer_vlan(struct nft_offload_ctx *ctx,
+ struct nft_flow_rule *flow)
+{
+ struct nft_flow_match *match = &flow->match;
+ struct nft_offload_ethertype ethertype;
+
+ if (match->dissector.used_keys & BIT(FLOW_DISSECTOR_KEY_CONTROL) &&
+ match->key.basic.n_proto != htons(ETH_P_8021Q) &&
+ match->key.basic.n_proto != htons(ETH_P_8021AD))
+ return;
+
+ ethertype.value = match->key.basic.n_proto;
+ ethertype.mask = match->mask.basic.n_proto;
+
+ if (match->dissector.used_keys & BIT(FLOW_DISSECTOR_KEY_VLAN) &&
+ (match->key.vlan.vlan_tpid == htons(ETH_P_8021Q) ||
+ match->key.vlan.vlan_tpid == htons(ETH_P_8021AD))) {
+ match->key.basic.n_proto = match->key.cvlan.vlan_tpid;
+ match->mask.basic.n_proto = match->mask.cvlan.vlan_tpid;
+ match->key.cvlan.vlan_tpid = match->key.vlan.vlan_tpid;
+ match->mask.cvlan.vlan_tpid = match->mask.vlan.vlan_tpid;
+ match->key.vlan.vlan_tpid = ethertype.value;
+ match->mask.vlan.vlan_tpid = ethertype.mask;
+ match->dissector.offset[FLOW_DISSECTOR_KEY_CVLAN] =
+ offsetof(struct nft_flow_key, cvlan);
+ match->dissector.used_keys |= BIT(FLOW_DISSECTOR_KEY_CVLAN);
+ } else {
+ match->key.basic.n_proto = match->key.vlan.vlan_tpid;
+ match->mask.basic.n_proto = match->mask.vlan.vlan_tpid;
+ match->key.vlan.vlan_tpid = ethertype.value;
+ match->mask.vlan.vlan_tpid = ethertype.mask;
+ match->dissector.offset[FLOW_DISSECTOR_KEY_VLAN] =
+ offsetof(struct nft_flow_key, vlan);
+ match->dissector.used_keys |= BIT(FLOW_DISSECTOR_KEY_VLAN);
+ }
+}
+
struct nft_flow_rule *nft_flow_rule_create(struct net *net,
const struct nft_rule *rule)
{
@@ -89,6 +131,8 @@ struct nft_flow_rule *nft_flow_rule_create(struct net *net,
expr = nft_expr_next(expr);
}
+ nft_flow_rule_transfer_vlan(ctx, flow);
+
flow->proto = ctx->dep.l3num;
kfree(ctx);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 599/677] vsock/vmci: log once the failed queue pair allocation
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (597 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 598/677] netfilter: nftables_offload: special ethertype handling for VLAN Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 600/677] libbpf: Initialize the bpf_seq_printf parameters array field by field Greg Kroah-Hartman
` (84 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefano Garzarella, Jorgen Hansen,
David S. Miller, Sasha Levin
From: Stefano Garzarella <sgarzare@redhat.com>
[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.
VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:
qp_alloc_hypercall result = -20
Could not attach to queue pair with -20
"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.
Since the error message can be useful in some cases, print it only once.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/vmw_vsock/vmci_transport.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index 8b65323207db..1c9ecb18b8e6 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -568,8 +568,7 @@ vmci_transport_queue_pair_alloc(struct vmci_qp **qpair,
peer, flags, VMCI_NO_PRIVILEGE_FLAGS);
out:
if (err < 0) {
- pr_err("Could not attach to queue pair with %d\n",
- err);
+ pr_err_once("Could not attach to queue pair with %d\n", err);
err = vmci_transport_error_to_vsock_error(err);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 600/677] libbpf: Initialize the bpf_seq_printf parameters array field by field
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (598 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 599/677] vsock/vmci: log once the failed queue pair allocation Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 601/677] net: ethernet: ixp4xx: Set the DMA masks explicitly Greg Kroah-Hartman
` (83 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florent Revest, Alexei Starovoitov,
Andrii Nakryiko, Sasha Levin
From: Florent Revest <revest@chromium.org>
[ Upstream commit 83cd92b46484aa8f64cdc0bff8ac6940d1f78519 ]
When initializing the __param array with a one liner, if all args are
const, the initial array value will be placed in the rodata section but
because libbpf does not support relocation in the rodata section, any
pointer in this array will stay NULL.
Fixes: c09add2fbc5a ("tools/libbpf: Add bpf_iter support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-5-revest@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/bpf_tracing.h | 40 +++++++++++++++++++++++++++----------
1 file changed, 29 insertions(+), 11 deletions(-)
diff --git a/tools/lib/bpf/bpf_tracing.h b/tools/lib/bpf/bpf_tracing.h
index f9ef37707888..1c2e91ee041d 100644
--- a/tools/lib/bpf/bpf_tracing.h
+++ b/tools/lib/bpf/bpf_tracing.h
@@ -413,20 +413,38 @@ typeof(name(0)) name(struct pt_regs *ctx) \
} \
static __always_inline typeof(name(0)) ____##name(struct pt_regs *ctx, ##args)
+#define ___bpf_fill0(arr, p, x) do {} while (0)
+#define ___bpf_fill1(arr, p, x) arr[p] = x
+#define ___bpf_fill2(arr, p, x, args...) arr[p] = x; ___bpf_fill1(arr, p + 1, args)
+#define ___bpf_fill3(arr, p, x, args...) arr[p] = x; ___bpf_fill2(arr, p + 1, args)
+#define ___bpf_fill4(arr, p, x, args...) arr[p] = x; ___bpf_fill3(arr, p + 1, args)
+#define ___bpf_fill5(arr, p, x, args...) arr[p] = x; ___bpf_fill4(arr, p + 1, args)
+#define ___bpf_fill6(arr, p, x, args...) arr[p] = x; ___bpf_fill5(arr, p + 1, args)
+#define ___bpf_fill7(arr, p, x, args...) arr[p] = x; ___bpf_fill6(arr, p + 1, args)
+#define ___bpf_fill8(arr, p, x, args...) arr[p] = x; ___bpf_fill7(arr, p + 1, args)
+#define ___bpf_fill9(arr, p, x, args...) arr[p] = x; ___bpf_fill8(arr, p + 1, args)
+#define ___bpf_fill10(arr, p, x, args...) arr[p] = x; ___bpf_fill9(arr, p + 1, args)
+#define ___bpf_fill11(arr, p, x, args...) arr[p] = x; ___bpf_fill10(arr, p + 1, args)
+#define ___bpf_fill12(arr, p, x, args...) arr[p] = x; ___bpf_fill11(arr, p + 1, args)
+#define ___bpf_fill(arr, args...) \
+ ___bpf_apply(___bpf_fill, ___bpf_narg(args))(arr, 0, args)
+
/*
* BPF_SEQ_PRINTF to wrap bpf_seq_printf to-be-printed values
* in a structure.
*/
-#define BPF_SEQ_PRINTF(seq, fmt, args...) \
- ({ \
- _Pragma("GCC diagnostic push") \
- _Pragma("GCC diagnostic ignored \"-Wint-conversion\"") \
- static const char ___fmt[] = fmt; \
- unsigned long long ___param[] = { args }; \
- _Pragma("GCC diagnostic pop") \
- int ___ret = bpf_seq_printf(seq, ___fmt, sizeof(___fmt), \
- ___param, sizeof(___param)); \
- ___ret; \
- })
+#define BPF_SEQ_PRINTF(seq, fmt, args...) \
+({ \
+ static const char ___fmt[] = fmt; \
+ unsigned long long ___param[___bpf_narg(args)]; \
+ \
+ _Pragma("GCC diagnostic push") \
+ _Pragma("GCC diagnostic ignored \"-Wint-conversion\"") \
+ ___bpf_fill(___param, args); \
+ _Pragma("GCC diagnostic pop") \
+ \
+ bpf_seq_printf(seq, ___fmt, sizeof(___fmt), \
+ ___param, sizeof(___param)); \
+})
#endif
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 601/677] net: ethernet: ixp4xx: Set the DMA masks explicitly
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (599 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 600/677] libbpf: Initialize the bpf_seq_printf parameters array field by field Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 602/677] gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check Greg Kroah-Hartman
` (82 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linus Walleij, David S. Miller, Sasha Levin
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 8d892d60941b00c86d2029c8a99db24ab4979673 ]
The former fix only papered over the actual problem: the
ethernet core expects the netdev .dev member to have the
proper DMA masks set, or there will be BUG_ON() triggered
in kernel/dma/mapping.c.
Fix this by simply copying dma_mask and dma_mask_coherent
from the parent device.
Fixes: e45d0fad4a5f ("net: ethernet: ixp4xx: Use parent dev for DMA pool")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 0152f1e70783..9defaa21a1a9 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1085,7 +1085,7 @@ static int init_queues(struct port *port)
int i;
if (!ports_open) {
- dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
+ dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
POOL_ALLOC_SIZE, 32, 0);
if (!dma_pool)
return -ENOMEM;
@@ -1435,6 +1435,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
ndev->netdev_ops = &ixp4xx_netdev_ops;
ndev->ethtool_ops = &ixp4xx_ethtool_ops;
ndev->tx_queue_len = 100;
+ /* Inherit the DMA masks from the platform device */
+ ndev->dev.dma_mask = dev->dma_mask;
+ ndev->dev.coherent_dma_mask = dev->coherent_dma_mask;
netif_napi_add(ndev, &port->napi, eth_poll, NAPI_WEIGHT);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 602/677] gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (600 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 601/677] net: ethernet: ixp4xx: Set the DMA masks explicitly Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 603/677] RDMA/cxgb4: add missing qpid increment Greg Kroah-Hartman
` (81 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Alexander Lobakin,
David S. Miller, Sasha Levin
From: Alexander Lobakin <alobakin@pm.me>
[ Upstream commit 7ad18ff6449cbd6beb26b53128ddf56d2685aa93 ]
Commit 38ec4944b593 ("gro: ensure frag0 meets IP header alignment")
did the right thing, but missed the fact that napi_gro_frags() logics
calls for skb_gro_reset_offset() *before* pulling Ethernet header
to the skb linear space.
That said, the introduced check for frag0 address being aligned to 4
always fails for it as Ethernet header is obviously 14 bytes long,
and in case with NET_IP_ALIGN its start is not aligned to 4.
Fix this by adding @nhoff argument to skb_gro_reset_offset() which
tells if an IP header is placed right at the start of frag0 or not.
This restores Fast GRO for napi_gro_frags() that became very slow
after the mentioned commit, and preserves the introduced check to
avoid silent unaligned accesses.
>From v1 [0]:
- inline tiny skb_gro_reset_offset() to let the code be optimized
more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- pull in Reviewed-by from Eric.
[0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me
Fixes: 38ec4944b593 ("gro: ensure frag0 meets IP header alignment")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/dev.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 1f79b9aa9a3f..15fe36332fb8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5914,7 +5914,7 @@ static struct list_head *gro_list_prepare(struct napi_struct *napi,
return head;
}
-static void skb_gro_reset_offset(struct sk_buff *skb)
+static inline void skb_gro_reset_offset(struct sk_buff *skb, u32 nhoff)
{
const struct skb_shared_info *pinfo = skb_shinfo(skb);
const skb_frag_t *frag0 = &pinfo->frags[0];
@@ -5925,7 +5925,7 @@ static void skb_gro_reset_offset(struct sk_buff *skb)
if (!skb_headlen(skb) && pinfo->nr_frags &&
!PageHighMem(skb_frag_page(frag0)) &&
- (!NET_IP_ALIGN || !(skb_frag_off(frag0) & 3))) {
+ (!NET_IP_ALIGN || !((skb_frag_off(frag0) + nhoff) & 3))) {
NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0);
NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int,
skb_frag_size(frag0),
@@ -6143,7 +6143,7 @@ gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
skb_mark_napi_id(skb, napi);
trace_napi_gro_receive_entry(skb);
- skb_gro_reset_offset(skb);
+ skb_gro_reset_offset(skb, 0);
ret = napi_skb_finish(napi, skb, dev_gro_receive(napi, skb));
trace_napi_gro_receive_exit(ret);
@@ -6232,7 +6232,7 @@ static struct sk_buff *napi_frags_skb(struct napi_struct *napi)
napi->skb = NULL;
skb_reset_mac_header(skb);
- skb_gro_reset_offset(skb);
+ skb_gro_reset_offset(skb, hlen);
if (unlikely(skb_gro_header_hard(skb, hlen))) {
eth = skb_gro_header_slow(skb, hlen, 0);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 603/677] RDMA/cxgb4: add missing qpid increment
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (601 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 602/677] gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 604/677] RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails Greg Kroah-Hartman
` (80 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Potnuri Bharat Teja, Jason Gunthorpe,
Sasha Levin
From: Potnuri Bharat Teja <bharat@chelsio.com>
[ Upstream commit 3a6684385928d00b29acac7658a5ae1f2a44494c ]
missing qpid increment leads to skipping few qpids while allocating QP.
This eventually leads to adapter running out of qpids after establishing
fewer connections than it actually supports.
Current patch increments the qpid correctly.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20210415151422.9139-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index 5c95c789f302..e800e8e8bed5 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -216,7 +216,7 @@ u32 c4iw_get_qpid(struct c4iw_rdev *rdev, struct c4iw_dev_ucontext *uctx)
goto out;
entry->qid = qid;
list_add_tail(&entry->entry, &uctx->cqids);
- for (i = qid; i & rdev->qpmask; i++) {
+ for (i = qid + 1; i & rdev->qpmask; i++) {
entry = kmalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
goto out;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 604/677] RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (602 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 603/677] RDMA/cxgb4: add missing qpid increment Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 605/677] ALSA: usb: midi: dont return -ENOMEM when usb_urb_ep_type_check fails Greg Kroah-Hartman
` (79 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Sindhu Devale,
Shiraz Saleem, Jason Gunthorpe, Sasha Levin
From: Sindhu Devale <sindhu.devale@intel.com>
[ Upstream commit 783a11bf2400e5d5c42a943c3083dc0330751842 ]
When i40iw_hmc_sd_one fails, chunk is freed without the deletion of chunk
entry in the PBLE info list.
Fix it by adding the chunk entry to the PBLE info list only after
successful addition of SD in i40iw_hmc_sd_one.
This fixes a static checker warning reported here:
https://lore.kernel.org/linux-rdma/YHV4CFXzqTm23AOZ@mwanda/
Fixes: 9715830157be ("i40iw: add pble resource files")
Link: https://lore.kernel.org/r/20210416002104.323-1-shiraz.saleem@intel.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/i40iw/i40iw_pble.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/hw/i40iw/i40iw_pble.c b/drivers/infiniband/hw/i40iw/i40iw_pble.c
index 53e5cd1a2bd6..146a4148219b 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_pble.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_pble.c
@@ -393,12 +393,9 @@ static enum i40iw_status_code add_pble_pool(struct i40iw_sc_dev *dev,
i40iw_debug(dev, I40IW_DEBUG_PBLE, "next_fpm_addr = %llx chunk_size[%u] = 0x%x\n",
pble_rsrc->next_fpm_addr, chunk->size, chunk->size);
pble_rsrc->unallocated_pble -= (chunk->size >> 3);
- list_add(&chunk->list, &pble_rsrc->pinfo.clist);
sd_reg_val = (sd_entry_type == I40IW_SD_TYPE_PAGED) ?
sd_entry->u.pd_table.pd_page_addr.pa : sd_entry->u.bp.addr.pa;
- if (sd_entry->valid)
- return 0;
- if (dev->is_pf) {
+ if (dev->is_pf && !sd_entry->valid) {
ret_code = i40iw_hmc_sd_one(dev, hmc_info->hmc_fn_id,
sd_reg_val, idx->sd_idx,
sd_entry->entry_type, true);
@@ -409,6 +406,7 @@ static enum i40iw_status_code add_pble_pool(struct i40iw_sc_dev *dev,
}
sd_entry->valid = true;
+ list_add(&chunk->list, &pble_rsrc->pinfo.clist);
return 0;
error:
kfree(chunk);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 605/677] ALSA: usb: midi: dont return -ENOMEM when usb_urb_ep_type_check fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (603 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 604/677] RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 606/677] sfc: ef10: fix TX queue lookup in TX event handling Greg Kroah-Hartman
` (78 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Takashi Iwai, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit cfd577acb769301b19c31361d45ae1f145318b7a ]
Currently when the call to usb_urb_ep_type_check fails (returning -EINVAL)
the error return path returns -ENOMEM via the exit label "error". Other
uses of the same error exit label set the err variable to -ENOMEM but this
is not being used. I believe the original intent was for the error exit
path to return the value in err rather than the hard coded -ENOMEM, so
return this rather than the hard coded -ENOMEM.
Addresses-Coverity: ("Unused value")
Fixes: 738d9edcfd44 ("ALSA: usb-audio: Add sanity checks for invalid EPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210420134719.381409-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/midi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 0c23fa6d8525..cd46ca7cd28d 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1332,7 +1332,7 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
error:
snd_usbmidi_in_endpoint_delete(ep);
- return -ENOMEM;
+ return err;
}
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 606/677] sfc: ef10: fix TX queue lookup in TX event handling
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (604 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 605/677] ALSA: usb: midi: dont return -ENOMEM when usb_urb_ep_type_check fails Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 607/677] vsock/virtio: free queued packets when closing socket Greg Kroah-Hartman
` (77 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Edward Cree, David S. Miller, Sasha Levin
From: Edward Cree <ecree.xilinx@gmail.com>
[ Upstream commit 172e269edfce34bac7c61c15551816bda4b0f140 ]
We're starting from a TXQ label, not a TXQ type, so
efx_channel_get_tx_queue() is inappropriate. This worked by chance,
because labels and types currently match on EF10, but we shouldn't
rely on that.
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/sfc/ef10.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index da6886dcac37..4fa72b573c17 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -2928,8 +2928,7 @@ efx_ef10_handle_tx_event(struct efx_channel *channel, efx_qword_t *event)
/* Get the transmit queue */
tx_ev_q_label = EFX_QWORD_FIELD(*event, ESF_DZ_TX_QLABEL);
- tx_queue = efx_channel_get_tx_queue(channel,
- tx_ev_q_label % EFX_MAX_TXQ_PER_CHANNEL);
+ tx_queue = channel->tx_queue + (tx_ev_q_label % EFX_MAX_TXQ_PER_CHANNEL);
if (!tx_queue->timestamping) {
/* Transmit completion */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 607/677] vsock/virtio: free queued packets when closing socket
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (605 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 606/677] sfc: ef10: fix TX queue lookup in TX event handling Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 608/677] net: marvell: prestera: fix port event handling on init Greg Kroah-Hartman
` (76 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefano Garzarella, David S. Miller,
Sasha Levin, syzbot+24452624fc4c571eedd9
From: Stefano Garzarella <sgarzare@redhat.com>
[ Upstream commit 8432b8114957235f42e070a16118a7f750de9d39 ]
As reported by syzbot [1], there is a memory leak while closing the
socket. We partially solved this issue with commit ac03046ece2b
("vsock/virtio: free packets during the socket release"), but we
forgot to drain the RX queue when the socket is definitely closed by
the scheduled work.
To avoid future issues, let's use the new virtio_transport_remove_sock()
to drain the RX queue before removing the socket from the af_vsock lists
calling vsock_remove_sock().
[1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9
Fixes: ac03046ece2b ("vsock/virtio: free packets during the socket release")
Reported-and-tested-by: syzbot+24452624fc4c571eedd9@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/vmw_vsock/virtio_transport_common.c | 28 +++++++++++++++++--------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index e4370b1b7494..902cb6dd710b 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -733,6 +733,23 @@ static int virtio_transport_reset_no_sock(const struct virtio_transport *t,
return t->send_pkt(reply);
}
+/* This function should be called with sk_lock held and SOCK_DONE set */
+static void virtio_transport_remove_sock(struct vsock_sock *vsk)
+{
+ struct virtio_vsock_sock *vvs = vsk->trans;
+ struct virtio_vsock_pkt *pkt, *tmp;
+
+ /* We don't need to take rx_lock, as the socket is closing and we are
+ * removing it.
+ */
+ list_for_each_entry_safe(pkt, tmp, &vvs->rx_queue, list) {
+ list_del(&pkt->list);
+ virtio_transport_free_pkt(pkt);
+ }
+
+ vsock_remove_sock(vsk);
+}
+
static void virtio_transport_wait_close(struct sock *sk, long timeout)
{
if (timeout) {
@@ -765,7 +782,7 @@ static void virtio_transport_do_close(struct vsock_sock *vsk,
(!cancel_timeout || cancel_delayed_work(&vsk->close_work))) {
vsk->close_work_scheduled = false;
- vsock_remove_sock(vsk);
+ virtio_transport_remove_sock(vsk);
/* Release refcnt obtained when we scheduled the timeout */
sock_put(sk);
@@ -828,22 +845,15 @@ static bool virtio_transport_close(struct vsock_sock *vsk)
void virtio_transport_release(struct vsock_sock *vsk)
{
- struct virtio_vsock_sock *vvs = vsk->trans;
- struct virtio_vsock_pkt *pkt, *tmp;
struct sock *sk = &vsk->sk;
bool remove_sock = true;
if (sk->sk_type == SOCK_STREAM)
remove_sock = virtio_transport_close(vsk);
- list_for_each_entry_safe(pkt, tmp, &vvs->rx_queue, list) {
- list_del(&pkt->list);
- virtio_transport_free_pkt(pkt);
- }
-
if (remove_sock) {
sock_set_flag(sk, SOCK_DONE);
- vsock_remove_sock(vsk);
+ virtio_transport_remove_sock(vsk);
}
}
EXPORT_SYMBOL_GPL(virtio_transport_release);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 608/677] net: marvell: prestera: fix port event handling on init
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (606 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 607/677] vsock/virtio: free queued packets when closing socket Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 609/677] net: davinci_emac: Fix incorrect masking of tx and rx error channel Greg Kroah-Hartman
` (75 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vadym Kochan, David S. Miller, Sasha Levin
From: Vadym Kochan <vkochan@marvell.com>
[ Upstream commit 333980481b99edb24ebd5d1a53af70a15d9146de ]
For some reason there might be a crash during ports creation if port
events are handling at the same time because fw may send initial
port event with down state.
The crash points to cancel_delayed_work() which is called when port went
is down. Currently I did not find out the real cause of the issue, so
fixed it by cancel port stats work only if previous port's state was up
& runnig.
The following is the crash which can be triggered:
[ 28.311104] Unable to handle kernel paging request at virtual address
000071775f776600
[ 28.319097] Mem abort info:
[ 28.321914] ESR = 0x96000004
[ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits
[ 28.330350] SET = 0, FnV = 0
[ 28.333430] EA = 0, S1PTW = 0
[ 28.336597] Data abort info:
[ 28.339499] ISV = 0, ISS = 0x00000004
[ 28.343362] CM = 0, WnR = 0
[ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000
[ 28.352842] [000071775f776600] pgd=0000000000000000,
p4d=0000000000000000
[ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 28.365310] Modules linked in: prestera_pci(+) prestera
uio_pdrv_genirq
[ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted
5.11.0-rc4 #1
[ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn
[prestera_pci]
[ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--)
[ 28.397468] pc : get_work_pool+0x48/0x60
[ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0
[ 28.406018] sp : ffff80001391bc60
[ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000
[ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88
[ 28.420089] x25: 0000000000000000 x24: ffff000106119760
[ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000
[ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0
[ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0
[ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88
[ 28.446898] x15: 0000000000000001 x14: 00000000000002ba
[ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4
[ 28.457622] x11: 0000000000000030 x10: 000000000000000c
[ 28.462985] x9 : 000000000000000c x8 : 0000000000000030
[ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758
[ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60
[ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060
[ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8
[ 28.489791] Call trace:
[ 28.492259] get_work_pool+0x48/0x60
[ 28.495874] cancel_delayed_work+0x38/0xb0
[ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera]
[ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera]
[ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci]
[ 28.516660] process_one_work+0x1e8/0x360
[ 28.520710] worker_thread+0x44/0x480
[ 28.524412] kthread+0x154/0x160
[ 28.527670] ret_from_fork+0x10/0x38
[ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020)
[ 28.537429] ---[ end trace 5eced933df3a080b ]---
Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/prestera/prestera_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/prestera/prestera_main.c b/drivers/net/ethernet/marvell/prestera/prestera_main.c
index 25dd903a3e92..d849b0f65de2 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_main.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_main.c
@@ -431,7 +431,8 @@ static void prestera_port_handle_event(struct prestera_switch *sw,
netif_carrier_on(port->dev);
if (!delayed_work_pending(caching_dw))
queue_delayed_work(prestera_wq, caching_dw, 0);
- } else {
+ } else if (netif_running(port->dev) &&
+ netif_carrier_ok(port->dev)) {
netif_carrier_off(port->dev);
if (delayed_work_pending(caching_dw))
cancel_delayed_work(caching_dw);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 609/677] net: davinci_emac: Fix incorrect masking of tx and rx error channel
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (607 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 608/677] net: marvell: prestera: fix port event handling on init Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 610/677] rtw88: refine napi deinit flow Greg Kroah-Hartman
` (74 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, David S. Miller, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ]
The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels)
are incorrect and always lead to a zero result. The mask values are
currently the incorrect post-right shifted values, fix this by setting
them to the currect values.
(I double checked these against the TMS320TCI6482 data sheet, section
5.30, page 127 to ensure I had the correct mask values for the TXERRCH
and RXERRCH fields in the MACSTATUS register).
Addresses-Coverity: ("Operands don't affect result")
Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/davinci_emac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index c7031e1960d4..03055c96f076 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -169,11 +169,11 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
/* EMAC mac_status register */
#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000)
#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20)
-#define EMAC_MACSTATUS_TXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_TXERRCH_MASK (0x70000)
#define EMAC_MACSTATUS_TXERRCH_SHIFT (16)
#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000)
#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12)
-#define EMAC_MACSTATUS_RXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_RXERRCH_MASK (0x700)
#define EMAC_MACSTATUS_RXERRCH_SHIFT (8)
/* EMAC RX register masks */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 610/677] rtw88: refine napi deinit flow
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (608 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 609/677] net: davinci_emac: Fix incorrect masking of tx and rx error channel Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 611/677] mt76: mt7615: fix memleak when mt7615_unregister_device() Greg Kroah-Hartman
` (73 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Po-Hao Huang, Ping-Ke Shih,
Kalle Valo, Sasha Levin
From: Po-Hao Huang <phhuang@realtek.com>
[ Upstream commit 7bd3760c71f7a18485d2c10ea0887e1d41519f4e ]
We used to stop napi before disabling irqs. And it turns out
to cause some problem when we try to stop device while interrupt arrives.
To safely stop pci, we do three steps:
1. disable interrupt
2. synchronize_irq
3. stop_napi
Since step 2 and 3 may not finish as expected when interrupt is enabled,
use rtwpci->running to decide whether interrupt should be re-enabled at
the time.
Fixes: 9e2fd29864c5 ("rtw88: add napi support")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210415084703.27255-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtw88/pci.c | 19 ++++++++++++++-----
drivers/net/wireless/realtek/rtw88/pci.h | 1 +
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 786a48649946..6b5c885798a4 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -581,23 +581,30 @@ static int rtw_pci_start(struct rtw_dev *rtwdev)
{
struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
+ rtw_pci_napi_start(rtwdev);
+
spin_lock_bh(&rtwpci->irq_lock);
+ rtwpci->running = true;
rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
spin_unlock_bh(&rtwpci->irq_lock);
- rtw_pci_napi_start(rtwdev);
-
return 0;
}
static void rtw_pci_stop(struct rtw_dev *rtwdev)
{
struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
+ struct pci_dev *pdev = rtwpci->pdev;
+ spin_lock_bh(&rtwpci->irq_lock);
+ rtwpci->running = false;
+ rtw_pci_disable_interrupt(rtwdev, rtwpci);
+ spin_unlock_bh(&rtwpci->irq_lock);
+
+ synchronize_irq(pdev->irq);
rtw_pci_napi_stop(rtwdev);
spin_lock_bh(&rtwpci->irq_lock);
- rtw_pci_disable_interrupt(rtwdev, rtwpci);
rtw_pci_dma_release(rtwdev, rtwpci);
spin_unlock_bh(&rtwpci->irq_lock);
}
@@ -1138,7 +1145,8 @@ static irqreturn_t rtw_pci_interrupt_threadfn(int irq, void *dev)
rtw_fw_c2h_cmd_isr(rtwdev);
/* all of the jobs for this interrupt have been done */
- rtw_pci_enable_interrupt(rtwdev, rtwpci, rx);
+ if (rtwpci->running)
+ rtw_pci_enable_interrupt(rtwdev, rtwpci, rx);
spin_unlock_bh(&rtwpci->irq_lock);
return IRQ_HANDLED;
@@ -1558,7 +1566,8 @@ static int rtw_pci_napi_poll(struct napi_struct *napi, int budget)
if (work_done < budget) {
napi_complete_done(napi, work_done);
spin_lock_bh(&rtwpci->irq_lock);
- rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
+ if (rtwpci->running)
+ rtw_pci_enable_interrupt(rtwdev, rtwpci, false);
spin_unlock_bh(&rtwpci->irq_lock);
/* When ISR happens during polling and before napi_complete
* while no further data is received. Data on the dma_ring will
diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index e76fc549a788..0ffae887527a 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -211,6 +211,7 @@ struct rtw_pci {
spinlock_t irq_lock;
u32 irq_mask[4];
bool irq_enabled;
+ bool running;
/* napi structure */
struct net_device netdev;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 611/677] mt76: mt7615: fix memleak when mt7615_unregister_device()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (609 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 610/677] rtw88: refine napi deinit flow Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 612/677] mt76: mt7915: fix memleak when mt7915_unregister_device() Greg Kroah-Hartman
` (72 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit 8ab31da7b89f71c4c2defcca989fab7b42f87d71 ]
mt7615_tx_token_put() should get call before mt76_free_pending_txwi().
Fixes: a6275e934605 ("mt76: mt7615: reset token when mac_reset happens")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index 72395925ddee..15b417d6d889 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -163,10 +163,9 @@ void mt7615_unregister_device(struct mt7615_dev *dev)
mt76_unregister_device(&dev->mt76);
if (mcu_running)
mt7615_mcu_exit(dev);
- mt7615_dma_cleanup(dev);
mt7615_tx_token_put(dev);
-
+ mt7615_dma_cleanup(dev);
tasklet_disable(&dev->irq_tasklet);
mt76_free_device(&dev->mt76);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 612/677] mt76: mt7915: fix memleak when mt7915_unregister_device()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (610 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 611/677] mt76: mt7615: fix memleak when mt7615_unregister_device() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 613/677] mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex Greg Kroah-Hartman
` (71 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ryder Lee, Felix Fietkau, Sasha Levin
From: Ryder Lee <ryder.lee@mediatek.com>
[ Upstream commit e9d32af478cfc3744a45245c0b126738af4b3ac4 ]
mt7915_tx_token_put() should get call before mt76_free_pending_txwi().
Fixes: f285dfb98562 ("mt76: mt7915: reset token when mac_reset happens")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index ad4e5b95158b..894016fdcf07 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -675,9 +675,8 @@ void mt7915_unregister_device(struct mt7915_dev *dev)
mt7915_unregister_ext_phy(dev);
mt76_unregister_device(&dev->mt76);
mt7915_mcu_exit(dev);
- mt7915_dma_cleanup(dev);
-
mt7915_tx_token_put(dev);
+ mt7915_dma_cleanup(dev);
mt76_free_device(&dev->mt76);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 613/677] mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (611 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 612/677] mt76: mt7915: fix memleak when mt7915_unregister_device() Greg Kroah-Hartman
@ 2021-05-12 14:50 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 614/677] powerpc/pseries/iommu: Fix window size for direct mapping with pmem Greg Kroah-Hartman
` (70 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 987c8fb4de437344f19a23d074c06faf67520a11 ]
Wake the chip before configuring the mcu log level
Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
index 6aa11ca6fc81..87a7ea12f3b3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c
@@ -9,10 +9,13 @@ mt7921_fw_debug_set(void *data, u64 val)
{
struct mt7921_dev *dev = data;
- dev->fw_debug = (u8)val;
+ mt7921_mutex_acquire(dev);
+ dev->fw_debug = (u8)val;
mt7921_mcu_fw_log_2_host(dev, dev->fw_debug);
+ mt7921_mutex_release(dev);
+
return 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 614/677] powerpc/pseries/iommu: Fix window size for direct mapping with pmem
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (612 preceding siblings ...)
2021-05-12 14:50 ` [PATCH 5.12 613/677] mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 615/677] crypto: ccp: Detect and reject "invalid" addresses destined for PSP Greg Kroah-Hartman
` (69 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leonardo Bras, Alexey Kardashevskiy,
Michael Ellerman, Sasha Levin
From: Leonardo Bras <leobras.c@gmail.com>
[ Upstream commit a9d2f9bb225fd2a764aef57738ab6c7f38d782ae ]
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS)
it's possible to use direct DMA mapping even with pmem region.
But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS
- page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times
smaller DDW to be created, being insufficient for correct usage.
Fix this so the correct window size is used in this case.
Fixes: bf6e2d562bbc4 ("powerpc/dma: Fallback to dma_ops when persistent memory present")
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420045404.438735-1-leobras.c@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/pseries/iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 9fc5217f0c8e..836cbbe0ecc5 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1229,7 +1229,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
if (pmem_present) {
if (query.largest_available_block >=
(1ULL << (MAX_PHYSMEM_BITS - page_shift)))
- len = MAX_PHYSMEM_BITS - page_shift;
+ len = MAX_PHYSMEM_BITS;
else
dev_info(&dev->dev, "Skipping ibm,pmemory");
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 615/677] crypto: ccp: Detect and reject "invalid" addresses destined for PSP
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (613 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 614/677] powerpc/pseries/iommu: Fix window size for direct mapping with pmem Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 616/677] net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region size Greg Kroah-Hartman
` (68 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brijesh Singh, Borislav Petkov,
Tom Lendacky, Christophe Leroy, Sean Christopherson,
Paolo Bonzini, Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit 74c1f1366eb7714b8b211554f6c5cee315ff3fbc ]
Explicitly reject using pointers that are not virt_to_phys() friendly
as the source for SEV commands that are sent to the PSP. The PSP works
with physical addresses, and __pa()/virt_to_phys() will not return the
correct address in these cases, e.g. for a vmalloc'd pointer. At best,
the bogus address will cause the command to fail, and at worst lead to
system instability.
While it's unlikely that callers will deliberately use a bad pointer for
SEV buffers, a caller can easily use a vmalloc'd pointer unknowingly when
running with CONFIG_VMAP_STACK=y as it's not obvious that putting the
command buffers on the stack would be bad. The command buffers are
relative small and easily fit on the stack, and the APIs to do not
document that the incoming pointer must be a physically contiguous,
__pa() friendly pointer.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210406224952.4177376-3-seanjc@google.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/ccp/sev-dev.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
index cb9b4c4e371e..8fd43c1acac1 100644
--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -150,6 +150,9 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
sev = psp->sev_data;
+ if (data && WARN_ON_ONCE(!virt_addr_valid(data)))
+ return -EINVAL;
+
/* Get the physical address of the command buffer */
phys_lsb = data ? lower_32_bits(__psp_pa(data)) : 0;
phys_msb = data ? upper_32_bits(__psp_pa(data)) : 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 616/677] net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region size
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (614 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 615/677] crypto: ccp: Detect and reject "invalid" addresses destined for PSP Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 617/677] nfp: devlink: initialize the devlink port attribute "lanes" Greg Kroah-Hartman
` (67 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tobias Waldekranz, Andrew Lunn,
David S. Miller, Sasha Levin
From: Tobias Waldekranz <tobias@waldekranz.com>
[ Upstream commit 281140a0a2ce4febf2c0ce5d29d0e7d961a826b1 ]
In the unlikely event of the VTU being loaded to the brim with 4k
entries, the last one was placed in the buffer, but the size reported
to devlink was off-by-one. Make sure that the final entry is available
to the caller.
Fixes: ca4d632aef03 ("net: dsa: mv88e6xxx: Export VTU as devlink region")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mv88e6xxx/devlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c
index 21953d6d484c..ada7a38d4d31 100644
--- a/drivers/net/dsa/mv88e6xxx/devlink.c
+++ b/drivers/net/dsa/mv88e6xxx/devlink.c
@@ -678,7 +678,7 @@ static int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds,
sizeof(struct mv88e6xxx_devlink_atu_entry);
break;
case MV88E6XXX_REGION_VTU:
- size = mv88e6xxx_max_vid(chip) *
+ size = (mv88e6xxx_max_vid(chip) + 1) *
sizeof(struct mv88e6xxx_devlink_vtu_entry);
break;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 617/677] nfp: devlink: initialize the devlink port attribute "lanes"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (615 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 616/677] net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region size Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 618/677] net: stmmac: fix TSO and TBS feature enabling during driver open Greg Kroah-Hartman
` (66 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yinjun Zhang, Louis Peens,
Simon Horman, David S. Miller, Sasha Levin
From: Yinjun Zhang <yinjun.zhang@corigine.com>
[ Upstream commit 90b669d65d99a3ee6965275269967cdee4da106e ]
The number of lanes of devlink port should be correctly initialized
when registering the port, so that the input check when running
"devlink port split <port> count <N>" can pass.
Fixes: a21cf0a8330b ("devlink: Add a new devlink port lanes attribute and pass to netlink")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/netronome/nfp/nfp_devlink.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_devlink.c b/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
index 713ee3041d49..bea978df7713 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
@@ -364,6 +364,7 @@ int nfp_devlink_port_register(struct nfp_app *app, struct nfp_port *port)
attrs.split = eth_port.is_split;
attrs.splittable = !attrs.split;
+ attrs.lanes = eth_port.port_lanes;
attrs.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL;
attrs.phys.port_number = eth_port.label_port;
attrs.phys.split_subport_number = eth_port.label_subport;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 618/677] net: stmmac: fix TSO and TBS feature enabling during driver open
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (616 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 617/677] nfp: devlink: initialize the devlink port attribute "lanes" Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 619/677] net: renesas: ravb: Fix a stuck issue when a lot of frames are received Greg Kroah-Hartman
` (65 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ong Boon Leong, David S. Miller, Sasha Levin
From: Ong Boon Leong <boon.leong.ong@intel.com>
[ Upstream commit 5e6038b88a5718910dd74b949946d9d9cee9a041 ]
TSO and TBS cannot co-exist and current implementation requires two
fixes:
1) stmmac_open() does not need to call stmmac_enable_tbs() because
the MAC is reset in stmmac_init_dma_engine() anyway.
2) Inside stmmac_hw_setup(), we should call stmmac_enable_tso() for
TX Q that is _not_ configured for TBS.
Fixes: 579a25a854d4 ("net: stmmac: Initial support for TBS")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4749bd0af160..c6f24abf6432 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2757,8 +2757,15 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* Enable TSO */
if (priv->tso) {
- for (chan = 0; chan < tx_cnt; chan++)
+ for (chan = 0; chan < tx_cnt; chan++) {
+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
+
+ /* TSO and TBS cannot co-exist */
+ if (tx_q->tbs & STMMAC_TBS_AVAIL)
+ continue;
+
stmmac_enable_tso(priv, priv->ioaddr, 1, chan);
+ }
}
/* Enable Split Header */
@@ -2850,9 +2857,8 @@ static int stmmac_open(struct net_device *dev)
struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan];
int tbs_en = priv->plat->tx_queues_cfg[chan].tbs_en;
+ /* Setup per-TXQ tbs flag before TX descriptor alloc */
tx_q->tbs |= tbs_en ? STMMAC_TBS_AVAIL : 0;
- if (stmmac_enable_tbs(priv, priv->ioaddr, tbs_en, chan))
- tx_q->tbs &= ~STMMAC_TBS_AVAIL;
}
ret = alloc_dma_desc_resources(priv);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 619/677] net: renesas: ravb: Fix a stuck issue when a lot of frames are received
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (617 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 618/677] net: stmmac: fix TSO and TBS feature enabling during driver open Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 620/677] net: phy: intel-xway: enable integrated led functions Greg Kroah-Hartman
` (64 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda, David S. Miller,
Sasha Levin
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[ Upstream commit 5718458b092bf6bf4482c5df32affba3c3259517 ]
When a lot of frames were received in the short term, the driver
caused a stuck of receiving until a new frame was received. For example,
the following command from other device could cause this issue.
$ sudo ping -f -l 1000 -c 1000 <this driver's ipaddress>
The previous code always cleared the interrupt flag of RX but checks
the interrupt flags in ravb_poll(). So, ravb_poll() could not call
ravb_rx() in the next time until a new RX frame was received if
ravb_rx() returned true. To fix the issue, always calls ravb_rx()
regardless the interrupt flags condition.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/renesas/ravb_main.c | 35 ++++++++----------------
1 file changed, 12 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index eb0c03bdb12d..cad57d58d764 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -911,31 +911,20 @@ static int ravb_poll(struct napi_struct *napi, int budget)
int q = napi - priv->napi;
int mask = BIT(q);
int quota = budget;
- u32 ris0, tis;
- for (;;) {
- tis = ravb_read(ndev, TIS);
- ris0 = ravb_read(ndev, RIS0);
- if (!((ris0 & mask) || (tis & mask)))
- break;
+ /* Processing RX Descriptor Ring */
+ /* Clear RX interrupt */
+ ravb_write(ndev, ~(mask | RIS0_RESERVED), RIS0);
+ if (ravb_rx(ndev, "a, q))
+ goto out;
- /* Processing RX Descriptor Ring */
- if (ris0 & mask) {
- /* Clear RX interrupt */
- ravb_write(ndev, ~(mask | RIS0_RESERVED), RIS0);
- if (ravb_rx(ndev, "a, q))
- goto out;
- }
- /* Processing TX Descriptor Ring */
- if (tis & mask) {
- spin_lock_irqsave(&priv->lock, flags);
- /* Clear TX interrupt */
- ravb_write(ndev, ~(mask | TIS_RESERVED), TIS);
- ravb_tx_free(ndev, q, true);
- netif_wake_subqueue(ndev, q);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- }
+ /* Processing RX Descriptor Ring */
+ spin_lock_irqsave(&priv->lock, flags);
+ /* Clear TX interrupt */
+ ravb_write(ndev, ~(mask | TIS_RESERVED), TIS);
+ ravb_tx_free(ndev, q, true);
+ netif_wake_subqueue(ndev, q);
+ spin_unlock_irqrestore(&priv->lock, flags);
napi_complete(napi);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 620/677] net: phy: intel-xway: enable integrated led functions
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (618 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 619/677] net: renesas: ravb: Fix a stuck issue when a lot of frames are received Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 621/677] mt76: mt7615: Fix a dereference of pointer sta before it is null checked Greg Kroah-Hartman
` (63 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin Schiller, David S. Miller,
Sasha Levin
From: Martin Schiller <ms@dev.tdt.de>
[ Upstream commit 357a07c26697a770d39d28b6b111f978deb4017d ]
The Intel xway phys offer the possibility to deactivate the integrated
LED function and to control the LEDs manually.
If this was set by the bootloader, it must be ensured that the
integrated LED function is enabled for all LEDs when loading the driver.
Before commit 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
the LEDs were enabled by a soft-reset of the PHY (using
genphy_soft_reset). Initialize the XWAY_MDIO_LED with it's default
value (which is applied during a soft reset) instead of adding back
the soft reset. This brings back the default LED configuration while
still preventing an excessive amount of soft resets.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/intel-xway.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index 6eac50d4b42f..d453ec016168 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -11,6 +11,18 @@
#define XWAY_MDIO_IMASK 0x19 /* interrupt mask */
#define XWAY_MDIO_ISTAT 0x1A /* interrupt status */
+#define XWAY_MDIO_LED 0x1B /* led control */
+
+/* bit 15:12 are reserved */
+#define XWAY_MDIO_LED_LED3_EN BIT(11) /* Enable the integrated function of LED3 */
+#define XWAY_MDIO_LED_LED2_EN BIT(10) /* Enable the integrated function of LED2 */
+#define XWAY_MDIO_LED_LED1_EN BIT(9) /* Enable the integrated function of LED1 */
+#define XWAY_MDIO_LED_LED0_EN BIT(8) /* Enable the integrated function of LED0 */
+/* bit 7:4 are reserved */
+#define XWAY_MDIO_LED_LED3_DA BIT(3) /* Direct Access to LED3 */
+#define XWAY_MDIO_LED_LED2_DA BIT(2) /* Direct Access to LED2 */
+#define XWAY_MDIO_LED_LED1_DA BIT(1) /* Direct Access to LED1 */
+#define XWAY_MDIO_LED_LED0_DA BIT(0) /* Direct Access to LED0 */
#define XWAY_MDIO_INIT_WOL BIT(15) /* Wake-On-LAN */
#define XWAY_MDIO_INIT_MSRE BIT(14)
@@ -159,6 +171,15 @@ static int xway_gphy_config_init(struct phy_device *phydev)
/* Clear all pending interrupts */
phy_read(phydev, XWAY_MDIO_ISTAT);
+ /* Ensure that integrated led function is enabled for all leds */
+ err = phy_write(phydev, XWAY_MDIO_LED,
+ XWAY_MDIO_LED_LED0_EN |
+ XWAY_MDIO_LED_LED1_EN |
+ XWAY_MDIO_LED_LED2_EN |
+ XWAY_MDIO_LED_LED3_EN);
+ if (err)
+ return err;
+
phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LEDCH,
XWAY_MMD_LEDCH_NACS_NONE |
XWAY_MMD_LEDCH_SBF_F02HZ |
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 621/677] mt76: mt7615: Fix a dereference of pointer sta before it is null checked
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (619 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 620/677] net: phy: intel-xway: enable integrated led functions Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 622/677] mt76: mt7921: fix possible invalid register access Greg Kroah-Hartman
` (62 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Felix Fietkau, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit 4a52d6abb193aea0f2923a2c917502bd2d718630 ]
Currently the assignment of idx dereferences pointer sta before
sta is null checked, leading to a potential null pointer dereference.
Fix this by assigning idx when it is required after the null check on
pointer sta.
Addresses-Coverity: ("Dereference before null check")
Fixes: a4a5a430b076 ("mt76: mt7615: fix TSF configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c b/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
index 4a370b9f7a17..f8d3673c2cae 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/usb_sdio.c
@@ -67,7 +67,7 @@ static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
struct mt7615_rate_desc *rate = &wrd->rate;
struct mt7615_sta *sta = wrd->sta;
u32 w5, w27, addr, val;
- u16 idx = sta->vif->mt76.omac_idx;
+ u16 idx;
lockdep_assert_held(&dev->mt76.mutex);
@@ -119,6 +119,7 @@ static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
sta->rate_probe = sta->rateset[rate->rateset].probe_rate.idx != -1;
+ idx = sta->vif->mt76.omac_idx;
idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 622/677] mt76: mt7921: fix possible invalid register access
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (620 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 621/677] mt76: mt7615: Fix a dereference of pointer sta before it is null checked Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 623/677] RDMA/rxe: Fix a bug in rxe_fill_ip_info() Greg Kroah-Hartman
` (61 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Wang, Felix Fietkau, Sasha Levin
From: Sean Wang <sean.wang@mediatek.com>
[ Upstream commit fe3fccde8870764ba3e60610774bd7bc9f8faeff ]
Disable the interrupt and synchronze for the pending irq handlers to ensure
the irq tasklet is not being scheduled after the suspend to avoid the
possible invalid register access acts when the host pcie controller is
suspended.
[17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs
[17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00
[17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs
[17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc
[17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs
...
17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300
[17933.620666] Call trace:
[17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76]
[17933.627234] mt7921_rr+0x38/0x44 [mt7921e]
[17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e]
[17933.636309] tasklet_action_common+0x12c/0x16c
[17933.640754] tasklet_action+0x24/0x2c
[17933.644418] __do_softirq+0x16c/0x344
[17933.648082] irq_exit+0xa8/0xac
[17933.651224] scheduler_ipi+0xd4/0x148
[17933.654890] handle_IPI+0x164/0x2d4
[17933.658379] gic_handle_irq+0x140/0x178
[17933.662216] el1_irq+0xb8/0x180
[17933.665361] cpuidle_enter_state+0xf8/0x204
[17933.669544] cpuidle_enter+0x38/0x4c
[17933.673122] do_idle+0x1a4/0x2a8
[17933.676352] cpu_startup_entry+0x24/0x28
[17933.680276] rest_init+0xd4/0xe0
[17933.683508] arch_call_rest_init+0x10/0x18
[17933.687606] start_kernel+0x340/0x3b4
[17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113)
[17933.697373] ---[ end trace a24b8e26ffbda3c5 ]---
[17933.767846] Kernel panic - not syncing: Fatal exception in interrupt
Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 8e756871a056..80f6f29892a4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -195,7 +195,6 @@ static int mt7921_pci_suspend(struct pci_dev *pdev, pm_message_t state)
mt76_for_each_q_rx(mdev, i) {
napi_disable(&mdev->napi[i]);
}
- tasklet_kill(&dev->irq_tasklet);
pci_enable_wake(pdev, pci_choose_state(pdev, state), true);
@@ -210,6 +209,9 @@ static int mt7921_pci_suspend(struct pci_dev *pdev, pm_message_t state)
/* disable interrupt */
mt76_wr(dev, MT_WFDMA0_HOST_INT_ENA, 0);
+ mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0x0);
+ synchronize_irq(pdev->irq);
+ tasklet_kill(&dev->irq_tasklet);
err = mt7921_mcu_fw_pmctrl(dev);
if (err)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 623/677] RDMA/rxe: Fix a bug in rxe_fill_ip_info()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (621 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 622/677] mt76: mt7921: fix possible invalid register access Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 624/677] RDMA/core: Add CM to restrack after successful attachment to a device Greg Kroah-Hartman
` (60 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Frank Zago, Bob Pearson, Zhu Yanjun,
Jason Gunthorpe, Sasha Levin
From: Bob Pearson <rpearsonhpe@gmail.com>
[ Upstream commit 45062f441590810772959d8e1f2b24ba57ce1bd9 ]
Fix a bug in rxe_fill_ip_info() which was attempting to convert from
RDMA_NETWORK_XXX to RXE_NETWORK_XXX. .._IPV6 should have mapped to .._IPV6
not .._IPV4.
Fixes: edebc8407b88 ("RDMA/rxe: Fix small problem in network_type patch")
Link: https://lore.kernel.org/r/20210421035952.4892-1-rpearson@hpe.com
Suggested-by: Frank Zago <frank.zago@hpe.com>
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe_av.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_av.c b/drivers/infiniband/sw/rxe/rxe_av.c
index df0d173d6acb..da2e867a1ed9 100644
--- a/drivers/infiniband/sw/rxe/rxe_av.c
+++ b/drivers/infiniband/sw/rxe/rxe_av.c
@@ -88,7 +88,7 @@ void rxe_av_fill_ip_info(struct rxe_av *av, struct rdma_ah_attr *attr)
type = RXE_NETWORK_TYPE_IPV4;
break;
case RDMA_NETWORK_IPV6:
- type = RXE_NETWORK_TYPE_IPV4;
+ type = RXE_NETWORK_TYPE_IPV6;
break;
default:
/* not reached - checked in rxe_av_chk_attr */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 624/677] RDMA/core: Add CM to restrack after successful attachment to a device
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (622 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 623/677] RDMA/rxe: Fix a bug in rxe_fill_ip_info() Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 625/677] powerpc/64: Fix the definition of the fixmap area Greg Kroah-Hartman
` (59 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shay Drory, Leon Romanovsky,
Jason Gunthorpe, Sasha Levin
From: Shay Drory <shayd@nvidia.com>
[ Upstream commit cb5cd0ea4eb3ce338a593a5331ddb4986ae20faa ]
The device attach triggers addition of CM_ID to the restrack DB.
However, when error occurs, we releasing this device, but defer CM_ID
release. This causes to the situation where restrack sees CM_ID that
is not valid anymore.
As a solution, add the CM_ID to the resource tracking DB only after the
attachment is finished.
Found by syzcaller:
infiniband syz0: added syz_tun
rdma_rxe: ignoring netdev event = 10 for syz_tun
infiniband syz0: set down
infiniband syz0: ib_query_port failed (-19)
restrack: ------------[ cut here ]------------
infiniband syz0: BUG: RESTRACK detected leak of resources
restrack: User CM_ID object allocated by syz-executor716 is not freed
restrack: ------------[ cut here ]------------
Fixes: b09c4d701220 ("RDMA/restrack: Improve readability in task name management")
Link: https://lore.kernel.org/r/ab93e56ba831eac65c322b3256796fa1589ec0bb.1618753862.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/cma.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 94096511599f..6ac07911a17b 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -463,7 +463,6 @@ static void _cma_attach_to_dev(struct rdma_id_private *id_priv,
id_priv->id.route.addr.dev_addr.transport =
rdma_node_get_transport(cma_dev->device->node_type);
list_add_tail(&id_priv->list, &cma_dev->id_list);
- rdma_restrack_add(&id_priv->res);
trace_cm_id_attach(id_priv, cma_dev->device);
}
@@ -700,6 +699,7 @@ static int cma_ib_acquire_dev(struct rdma_id_private *id_priv,
mutex_lock(&lock);
cma_attach_to_dev(id_priv, listen_id_priv->cma_dev);
mutex_unlock(&lock);
+ rdma_restrack_add(&id_priv->res);
return 0;
}
@@ -754,8 +754,10 @@ static int cma_iw_acquire_dev(struct rdma_id_private *id_priv,
}
out:
- if (!ret)
+ if (!ret) {
cma_attach_to_dev(id_priv, cma_dev);
+ rdma_restrack_add(&id_priv->res);
+ }
mutex_unlock(&lock);
return ret;
@@ -816,6 +818,7 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv)
found:
cma_attach_to_dev(id_priv, cma_dev);
+ rdma_restrack_add(&id_priv->res);
mutex_unlock(&lock);
addr = (struct sockaddr_ib *)cma_src_addr(id_priv);
memcpy(&addr->sib_addr, &sgid, sizeof(sgid));
@@ -2529,6 +2532,7 @@ static int cma_listen_on_dev(struct rdma_id_private *id_priv,
rdma_addr_size(cma_src_addr(id_priv)));
_cma_attach_to_dev(dev_id_priv, cma_dev);
+ rdma_restrack_add(&dev_id_priv->res);
cma_id_get(id_priv);
dev_id_priv->internal_id = 1;
dev_id_priv->afonly = id_priv->afonly;
@@ -3169,6 +3173,7 @@ port_found:
ib_addr_set_pkey(&id_priv->id.route.addr.dev_addr, pkey);
id_priv->id.port_num = p;
cma_attach_to_dev(id_priv, cma_dev);
+ rdma_restrack_add(&id_priv->res);
cma_set_loopback(cma_src_addr(id_priv));
out:
mutex_unlock(&lock);
@@ -3201,6 +3206,7 @@ static void addr_handler(int status, struct sockaddr *src_addr,
if (status)
pr_debug_ratelimited("RDMA CM: ADDR_ERROR: failed to acquire device. status %d\n",
status);
+ rdma_restrack_add(&id_priv->res);
} else if (status) {
pr_debug_ratelimited("RDMA CM: ADDR_ERROR: failed to resolve IP. status %d\n", status);
}
@@ -3812,6 +3818,8 @@ int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr)
if (ret)
goto err2;
+ if (!cma_any_addr(addr))
+ rdma_restrack_add(&id_priv->res);
return 0;
err2:
if (id_priv->cma_dev)
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 625/677] powerpc/64: Fix the definition of the fixmap area
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (623 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 624/677] RDMA/core: Add CM to restrack after successful attachment to a device Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 626/677] ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices Greg Kroah-Hartman
` (58 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman,
Sasha Levin
From: Christophe Leroy <christophe.leroy@csgroup.eu>
[ Upstream commit 9ccba66d4d2aff9a3909aa77d57ea8b7cc166f3c ]
At the time being, the fixmap area is defined at the top of
the address space or just below KASAN.
This definition is not valid for PPC64.
For PPC64, use the top of the I/O space.
Because of circular dependencies, it is not possible to include
asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size
AREA at the top of the I/O space for fixmap and ensure during
build that the size is big enough.
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/include/asm/book3s/64/pgtable.h | 4 +++-
arch/powerpc/include/asm/fixmap.h | 9 +++++++++
arch/powerpc/include/asm/nohash/64/pgtable.h | 5 ++++-
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 058601efbc8a..b703330459b8 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -7,6 +7,7 @@
#ifndef __ASSEMBLY__
#include <linux/mmdebug.h>
#include <linux/bug.h>
+#include <linux/sizes.h>
#endif
/*
@@ -323,7 +324,8 @@ extern unsigned long pci_io_base;
#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE)
#define IOREMAP_BASE (PHB_IO_END)
#define IOREMAP_START (ioremap_bot)
-#define IOREMAP_END (KERN_IO_END)
+#define IOREMAP_END (KERN_IO_END - FIXADDR_SIZE)
+#define FIXADDR_SIZE SZ_32M
/* Advertise special mapping type for AGP */
#define HAVE_PAGE_AGP
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 8d03c16a3663..947b5b9c4424 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -23,12 +23,17 @@
#include <asm/kmap_size.h>
#endif
+#ifdef CONFIG_PPC64
+#define FIXADDR_TOP (IOREMAP_END + FIXADDR_SIZE)
+#else
+#define FIXADDR_SIZE 0
#ifdef CONFIG_KASAN
#include <asm/kasan.h>
#define FIXADDR_TOP (KASAN_SHADOW_START - PAGE_SIZE)
#else
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
#endif
+#endif
/*
* Here we define all the compile-time 'special' virtual
@@ -50,6 +55,7 @@
*/
enum fixed_addresses {
FIX_HOLE,
+#ifdef CONFIG_PPC32
/* reserve the top 128K for early debugging purposes */
FIX_EARLY_DEBUG_TOP = FIX_HOLE,
FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+(ALIGN(SZ_128K, PAGE_SIZE)/PAGE_SIZE)-1,
@@ -72,6 +78,7 @@ enum fixed_addresses {
FIX_IMMR_SIZE,
#endif
/* FIX_PCIE_MCFG, */
+#endif /* CONFIG_PPC32 */
__end_of_permanent_fixed_addresses,
#define NR_FIX_BTMAPS (SZ_256K / PAGE_SIZE)
@@ -98,6 +105,8 @@ enum fixed_addresses {
static inline void __set_fixmap(enum fixed_addresses idx,
phys_addr_t phys, pgprot_t flags)
{
+ BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC64) && __FIXADDR_SIZE > FIXADDR_SIZE);
+
if (__builtin_constant_p(idx))
BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
else if (WARN_ON(idx >= __end_of_fixed_addresses))
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 6cb8aa357191..57cd3892bfe0 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -6,6 +6,8 @@
* the ppc64 non-hashed page table.
*/
+#include <linux/sizes.h>
+
#include <asm/nohash/64/pgtable-4k.h>
#include <asm/barrier.h>
#include <asm/asm-const.h>
@@ -54,7 +56,8 @@
#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE)
#define IOREMAP_BASE (PHB_IO_END)
#define IOREMAP_START (ioremap_bot)
-#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE)
+#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE - FIXADDR_SIZE)
+#define FIXADDR_SIZE SZ_32M
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 626/677] ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (624 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 625/677] powerpc/64: Fix the definition of the fixmap area Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 627/677] ath10k: Fix a use after free in ath10k_htc_send_bundle Greg Kroah-Hartman
` (57 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Toke Høiland-Jørgensen,
Lorenzo Bianconi, Kalle Valo, Sasha Levin
From: Toke Høiland-Jørgensen <toke@redhat.com>
[ Upstream commit 7dd9a40fd6e0d0f1fd8e1931c007e080801dfdce ]
When the error check in ath9k_hw_read_revisions() was added, it checked for
-EIO which is what ath9k_regread() in the ath9k_htc driver uses. However,
for plain ath9k, the register read function uses ioread32(), which just
returns -1 on error. So if such a read fails, it still gets passed through
and ends up as a weird mac revision in the log output.
Fix this by changing ath9k_regread() to return -1 on error like ioread32()
does, and fix the error check to look for that instead of -EIO.
Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index db0c6fa9c9dc..ff61ae34ecdf 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -246,7 +246,7 @@ static unsigned int ath9k_regread(void *hw_priv, u32 reg_offset)
if (unlikely(r)) {
ath_dbg(common, WMI, "REGISTER READ FAILED: (0x%04x, %d)\n",
reg_offset, r);
- return -EIO;
+ return -1;
}
return be32_to_cpu(val);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 5abc2a5526ec..2ca3b86714a9 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -286,7 +286,7 @@ static bool ath9k_hw_read_revisions(struct ath_hw *ah)
srev = REG_READ(ah, AR_SREV);
- if (srev == -EIO) {
+ if (srev == -1) {
ath_err(ath9k_hw_common(ah),
"Failed to read SREV register");
return false;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 627/677] ath10k: Fix a use after free in ath10k_htc_send_bundle
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (625 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 626/677] ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 628/677] ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock Greg Kroah-Hartman
` (56 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Kalle Valo, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 8392df5d7e0b6a7d21440da1fc259f9938f4dec3 ]
In ath10k_htc_send_bundle, the bundle_skb could be freed by
dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later
by bundle_skb->len.
As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to
skb_len after the bundle_skb was freed.
Fixes: c8334512f3dd1 ("ath10k: add htt TX bundle for sdio")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210329120154.8963-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/htc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 0a37be6a7d33..fab398046a3f 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -669,7 +669,7 @@ static int ath10k_htc_send_bundle(struct ath10k_htc_ep *ep,
ath10k_dbg(ar, ATH10K_DBG_HTC,
"bundle tx status %d eid %d req count %d count %d len %d\n",
- ret, ep->eid, skb_queue_len(&ep->tx_req_head), cn, bundle_skb->len);
+ ret, ep->eid, skb_queue_len(&ep->tx_req_head), cn, skb_len);
return ret;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 628/677] ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (626 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 627/677] ath10k: Fix a use after free in ath10k_htc_send_bundle Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 629/677] wlcore: Fix buffer overrun by snprintf due to incorrect buffer size Greg Kroah-Hartman
` (55 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Machek, Shuah Khan, Kalle Valo,
Sasha Levin
From: Shuah Khan <skhan@linuxfoundation.org>
[ Upstream commit eaaf52e4b866f265eb791897d622961293fd48c1 ]
ath10k_wmi_tlv_op_pull_peer_stats_info() could try to unlock RCU lock
winthout locking it first when peer reason doesn't match the valid
cases for this function.
Add a default case to return without unlocking.
Fixes: 09078368d516 ("ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210406230228.31301-1-skhan@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index d97b33f789e4..7efbe03fbca8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -592,6 +592,9 @@ static void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
GFP_ATOMIC
);
break;
+ default:
+ kfree(tb);
+ return;
}
exit:
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 629/677] wlcore: Fix buffer overrun by snprintf due to incorrect buffer size
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (627 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 628/677] ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 630/677] powerpc/perf: Fix the threshold event selection for memory events in power10 Greg Kroah-Hartman
` (54 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Colin Ian King, Arnd Bergmann,
Kalle Valo, Sasha Levin
From: Colin Ian King <colin.king@canonical.com>
[ Upstream commit a9a4c080deb33f44e08afe35f4ca4bb9ece89f4e ]
The size of the buffer than can be written to is currently incorrect, it is
always the size of the entire buffer even though the snprintf is writing
as position pos into the buffer. Fix this by setting the buffer size to be
the number of bytes left in the buffer, namely sizeof(buf) - pos.
Addresses-Coverity: ("Out-of-bounds access")
Fixes: 7b0e2c4f6be3 ("wlcore: fix overlapping snprintf arguments in debugfs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210419141405.180582-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ti/wlcore/debugfs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.h b/drivers/net/wireless/ti/wlcore/debugfs.h
index 715edfa5f89f..a9e13e6d65c5 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.h
+++ b/drivers/net/wireless/ti/wlcore/debugfs.h
@@ -84,7 +84,7 @@ static ssize_t sub## _ ##name## _read(struct file *file, \
wl1271_debugfs_update_stats(wl); \
\
for (i = 0; i < len && pos < sizeof(buf); i++) \
- pos += snprintf(buf + pos, sizeof(buf), \
+ pos += snprintf(buf + pos, sizeof(buf) - pos, \
"[%d] = %d\n", i, stats->sub.name[i]); \
\
return wl1271_format_buffer(userbuf, count, ppos, "%s", buf); \
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 630/677] powerpc/perf: Fix the threshold event selection for memory events in power10
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (628 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 629/677] wlcore: Fix buffer overrun by snprintf due to incorrect buffer size Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 631/677] powerpc/52xx: Fix an invalid ASM expression (addi used instead of add) Greg Kroah-Hartman
` (53 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Athira Rajeev, Madhavan Srinivasan,
Michael Ellerman, Sasha Levin
From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[ Upstream commit 66d9b7492887d34c711bc05b36c22438acba51b4 ]
Memory events (mem-loads and mem-stores) currently use the threshold
event selection as issue to finish. Power10 supports issue to complete
as part of thresholding which is more appropriate for mem-loads and
mem-stores. Hence fix the event code for memory events to use issue
to complete.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614840015-1535-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/perf/power10-events-list.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/perf/power10-events-list.h b/arch/powerpc/perf/power10-events-list.h
index e45dafe818ed..93be7197d250 100644
--- a/arch/powerpc/perf/power10-events-list.h
+++ b/arch/powerpc/perf/power10-events-list.h
@@ -75,5 +75,5 @@ EVENT(PM_RUN_INST_CMPL_ALT, 0x00002);
* thresh end (TE)
*/
-EVENT(MEM_LOADS, 0x34340401e0);
-EVENT(MEM_STORES, 0x343c0401e0);
+EVENT(MEM_LOADS, 0x35340401e0);
+EVENT(MEM_STORES, 0x353c0401e0);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 631/677] powerpc/52xx: Fix an invalid ASM expression (addi used instead of add)
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (629 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 630/677] powerpc/perf: Fix the threshold event selection for memory events in power10 Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 632/677] net: phy: marvell: fix m88e1011_set_downshift Greg Kroah-Hartman
` (52 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman,
Sasha Levin
From: Christophe Leroy <christophe.leroy@csgroup.eu>
[ Upstream commit 8a87a507714386efc39c3ae6fa24d4f79846b522 ]
AS arch/powerpc/platforms/52xx/lite5200_sleep.o
arch/powerpc/platforms/52xx/lite5200_sleep.S: Assembler messages:
arch/powerpc/platforms/52xx/lite5200_sleep.S:184: Warning: invalid register expression
In the following code, 'addi' is wrong, has to be 'add'
/* local udelay in sram is needed */
udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
addi r12, r13, r12 /* end */
Fixes: ee983079ce04 ("[POWERPC] MPC5200 low power mode")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cb4cec9131c8577803367f1699209a7e104cec2a.1619025821.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/52xx/lite5200_sleep.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
index 11475c58ea43..afee8b1515a8 100644
--- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -181,7 +181,7 @@ sram_code:
udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
- addi r12, r13, r12 /* end */
+ add r12, r13, r12 /* end */
1:
mftb r13 /* current */
cmp cr0, r13, r12
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 632/677] net: phy: marvell: fix m88e1011_set_downshift
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (630 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 631/677] powerpc/52xx: Fix an invalid ASM expression (addi used instead of add) Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 633/677] net: phy: marvell: fix m88e1111_set_downshift Greg Kroah-Hartman
` (51 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Kochetkov, Andrew Lunn,
David S. Miller, Sasha Levin
From: Maxim Kochetkov <fido_max@inbox.ru>
[ Upstream commit 990875b299b8612aeb85cb2e2751796f1add65ff ]
Changing downshift params without software reset has no effect,
so call genphy_soft_reset() after change downshift params.
As the datasheet says:
Changes to these bits are disruptive to the normal operation therefore,
any changes to these registers must be followed by software reset
to take effect.
Fixes: 911af5e149bb ("net: phy: marvell: fix downshift function naming")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/marvell.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 8018ddf7f316..723f25f6138d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1025,22 +1025,28 @@ static int m88e1011_get_downshift(struct phy_device *phydev, u8 *data)
static int m88e1011_set_downshift(struct phy_device *phydev, u8 cnt)
{
- int val;
+ int val, err;
if (cnt > MII_M1011_PHY_SCR_DOWNSHIFT_MAX)
return -E2BIG;
- if (!cnt)
- return phy_clear_bits(phydev, MII_M1011_PHY_SCR,
- MII_M1011_PHY_SCR_DOWNSHIFT_EN);
+ if (!cnt) {
+ err = phy_clear_bits(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_DOWNSHIFT_EN);
+ } else {
+ val = MII_M1011_PHY_SCR_DOWNSHIFT_EN;
+ val |= FIELD_PREP(MII_M1011_PHY_SCR_DOWNSHIFT_MASK, cnt - 1);
- val = MII_M1011_PHY_SCR_DOWNSHIFT_EN;
- val |= FIELD_PREP(MII_M1011_PHY_SCR_DOWNSHIFT_MASK, cnt - 1);
+ err = phy_modify(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_DOWNSHIFT_EN |
+ MII_M1011_PHY_SCR_DOWNSHIFT_MASK,
+ val);
+ }
- return phy_modify(phydev, MII_M1011_PHY_SCR,
- MII_M1011_PHY_SCR_DOWNSHIFT_EN |
- MII_M1011_PHY_SCR_DOWNSHIFT_MASK,
- val);
+ if (err < 0)
+ return err;
+
+ return genphy_soft_reset(phydev);
}
static int m88e1011_get_tunable(struct phy_device *phydev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 633/677] net: phy: marvell: fix m88e1111_set_downshift
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (631 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 632/677] net: phy: marvell: fix m88e1011_set_downshift Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 634/677] net: enetc: fix link error again Greg Kroah-Hartman
` (50 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Kochetkov, Andrew Lunn,
David S. Miller, Sasha Levin
From: Maxim Kochetkov <fido_max@inbox.ru>
[ Upstream commit e7679c55a7249f1315256cfc672d53e84072e223 ]
Changing downshift params without software reset has no effect,
so call genphy_soft_reset() after change downshift params.
As the datasheet says:
Changes to these bits are disruptive to the normal operation therefore,
any changes to these registers must be followed by software reset
to take effect.
Fixes: 5c6bc5199b5d ("net: phy: marvell: add downshift support for M88E1111")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/marvell.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 723f25f6138d..f86c9ddc609e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -967,22 +967,28 @@ static int m88e1111_get_downshift(struct phy_device *phydev, u8 *data)
static int m88e1111_set_downshift(struct phy_device *phydev, u8 cnt)
{
- int val;
+ int val, err;
if (cnt > MII_M1111_PHY_EXT_CR_DOWNSHIFT_MAX)
return -E2BIG;
- if (!cnt)
- return phy_clear_bits(phydev, MII_M1111_PHY_EXT_CR,
- MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN);
+ if (!cnt) {
+ err = phy_clear_bits(phydev, MII_M1111_PHY_EXT_CR,
+ MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN);
+ } else {
+ val = MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN;
+ val |= FIELD_PREP(MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK, cnt - 1);
- val = MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN;
- val |= FIELD_PREP(MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK, cnt - 1);
+ err = phy_modify(phydev, MII_M1111_PHY_EXT_CR,
+ MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN |
+ MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK,
+ val);
+ }
- return phy_modify(phydev, MII_M1111_PHY_EXT_CR,
- MII_M1111_PHY_EXT_CR_DOWNSHIFT_EN |
- MII_M1111_PHY_EXT_CR_DOWNSHIFT_MASK,
- val);
+ if (err < 0)
+ return err;
+
+ return genphy_soft_reset(phydev);
}
static int m88e1111_get_tunable(struct phy_device *phydev,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 634/677] net: enetc: fix link error again
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (632 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 633/677] net: phy: marvell: fix m88e1111_set_downshift Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 635/677] net, xdp: Update pkt_type if generic XDP changes unicast MAC Greg Kroah-Hartman
` (49 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Vladimir Oltean,
David S. Miller, Sasha Levin
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 74c97ea3b61e4ce149444f904ee8d4fc7073505b ]
A link time bug that I had fixed before has come back now that
another sub-module was added to the enetc driver:
ERROR: modpost: "enetc_ierb_register_pf" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined!
The problem is that the enetc Makefile is not actually used for
the ierb module if that is the only built-in driver in there
and everything else is a loadable module.
Fix it by always entering the directory this time, regardless
of which symbols are configured. This should reliably fix the
problem and prevent it from coming back another time.
Fixes: 112463ddbe82 ("net: dsa: felix: fix link error")
Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/Makefile | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 67c436400352..de7b31842233 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -24,6 +24,4 @@ obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/
obj-$(CONFIG_FSL_DPAA2_ETH) += dpaa2/
-obj-$(CONFIG_FSL_ENETC) += enetc/
-obj-$(CONFIG_FSL_ENETC_MDIO) += enetc/
-obj-$(CONFIG_FSL_ENETC_VF) += enetc/
+obj-y += enetc/
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 635/677] net, xdp: Update pkt_type if generic XDP changes unicast MAC
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (633 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 634/677] net: enetc: fix link error again Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 636/677] bnxt_en: fix ternary sign extension bug in bnxt_show_temp() Greg Kroah-Hartman
` (48 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin Willi, Daniel Borkmann,
Toke Høiland-Jørgensen, Sasha Levin
From: Martin Willi <martin@strongswan.org>
[ Upstream commit 22b6034323fd736f260e00b9ea85c634abeb3446 ]
If a generic XDP program changes the destination MAC address from/to
multicast/broadcast, the skb->pkt_type is updated to properly handle
the packet when passed up the stack. When changing the MAC from/to
the NICs MAC, PACKET_HOST/OTHERHOST is not updated, though, making
the behavior different from that of native XDP.
Remember the PACKET_HOST/OTHERHOST state before calling the program
in generic XDP, and update pkt_type accordingly if the destination
MAC address has changed. As eth_type_trans() assumes a default
pkt_type of PACKET_HOST, restore that before calling it.
The use case for this is when a XDP program wants to push received
packets up the stack by rewriting the MAC to the NICs MAC, for
example by cluster nodes sharing MAC addresses.
Fixes: 297249569932 ("net: fix generic XDP to handle if eth header was mangled")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210419141559.8611-1-martin@strongswan.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/dev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 15fe36332fb8..70829c568645 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4672,10 +4672,10 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb,
void *orig_data, *orig_data_end, *hard_start;
struct netdev_rx_queue *rxqueue;
u32 metalen, act = XDP_DROP;
+ bool orig_bcast, orig_host;
u32 mac_len, frame_sz;
__be16 orig_eth_type;
struct ethhdr *eth;
- bool orig_bcast;
int off;
/* Reinjected packets coming from act_mirred or similar should
@@ -4722,6 +4722,7 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb,
orig_data_end = xdp->data_end;
orig_data = xdp->data;
eth = (struct ethhdr *)xdp->data;
+ orig_host = ether_addr_equal_64bits(eth->h_dest, skb->dev->dev_addr);
orig_bcast = is_multicast_ether_addr_64bits(eth->h_dest);
orig_eth_type = eth->h_proto;
@@ -4749,8 +4750,11 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb,
/* check if XDP changed eth hdr such SKB needs update */
eth = (struct ethhdr *)xdp->data;
if ((orig_eth_type != eth->h_proto) ||
+ (orig_host != ether_addr_equal_64bits(eth->h_dest,
+ skb->dev->dev_addr)) ||
(orig_bcast != is_multicast_ether_addr_64bits(eth->h_dest))) {
__skb_push(skb, ETH_HLEN);
+ skb->pkt_type = PACKET_HOST;
skb->protocol = eth_type_trans(skb, skb->dev);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 636/677] bnxt_en: fix ternary sign extension bug in bnxt_show_temp()
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (634 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 635/677] net, xdp: Update pkt_type if generic XDP changes unicast MAC Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 637/677] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E Greg Kroah-Hartman
` (47 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 27537929f30d3136a71ef29db56127a33c92dad7 ]
The problem is that bnxt_show_temp() returns long but "rc" is an int
and "len" is a u32. With ternary operations the type promotion is quite
tricky. The negative "rc" is first promoted to u32 and then to long so
it ends up being a high positive value instead of a a negative as we
intended.
Fix this by removing the ternary.
Fixes: d69753fa1ecb ("bnxt_en: return proper error codes in bnxt_show_temp")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b53a0d87371a..aeb8c61c0f87 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9736,7 +9736,9 @@ static ssize_t bnxt_show_temp(struct device *dev,
if (!rc)
len = sprintf(buf, "%u\n", resp->temp * 1000); /* display millidegree */
mutex_unlock(&bp->hwrm_cmd_lock);
- return rc ?: len;
+ if (rc)
+ return rc;
+ return len;
}
static SENSOR_DEVICE_ATTR(temp1_input, 0444, bnxt_show_temp, NULL, 0);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 637/677] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (635 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 636/677] bnxt_en: fix ternary sign extension bug in bnxt_show_temp() Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 638/677] arm64: " Greg Kroah-Hartman
` (46 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kunihiko Hayashi, David S. Miller,
Sasha Levin
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[ Upstream commit 9ba585cc5b56ea14a453ba6be9bdb984ed33471a ]
UniPhier PXs2 boards have RTL8211E ethernet phy, and the phy have the RX/TX
delays of RGMII interface using pull-ups on the RXDLY and TXDLY pins.
After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the delays are working correctly, however, "rgmii" means
no delay and the phy doesn't work. So need to set the phy-mode to
"rgmii-id" to show that RX/TX delays are enabled.
Fixes: e3cc931921d2 ("ARM: dts: uniphier: add AVE ethernet node")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index b0b15c97306b..e81e5937a60a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -583,7 +583,7 @@
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 638/677] arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (636 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 637/677] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 639/677] net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb Greg Kroah-Hartman
` (45 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kunihiko Hayashi, David S. Miller,
Sasha Levin
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[ Upstream commit dcabb06bf127b3e0d3fbc94a2b65dd56c2725851 ]
UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have
the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY
pins.
After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the delays are working correctly, however, "rgmii" means
no delay and the phy doesn't work. So need to set the phy-mode to
"rgmii-id" to show that RX/TX delays are enabled.
Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +-
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a87b8a678719..8f2c1c1e2c64 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -734,7 +734,7 @@
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 0e52dadf54b3..be97da132258 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -564,7 +564,7 @@
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
@@ -585,7 +585,7 @@
clocks = <&sys_clk 7>;
reset-names = "ether";
resets = <&sys_rst 7>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 1>;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 639/677] net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (637 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 638/677] arm64: " Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 640/677] selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static Greg Kroah-Hartman
` (44 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Sabrina Dubroca,
Phillip Potter, David S. Miller, Sasha Levin
From: Phillip Potter <phil@philpotter.co.uk>
[ Upstream commit d13f048dd40e8577260cd43faea8ec9b77520197 ]
Modify the header size check in geneve6_xmit_skb and geneve_xmit_skb
to use pskb_inet_may_pull rather than pskb_network_may_pull. This fixes
two kernel selftest failures introduced by the commit introducing the
checks:
IPv4 over geneve6: PMTU exceptions
IPv4 over geneve6: PMTU exceptions - nexthop objects
It does this by correctly accounting for the fact that IPv4 packets may
transit over geneve IPv6 tunnels (and vice versa), and still fixes the
uninit-value bug fixed by the original commit.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 6628ddfec758 ("net: geneve: check skb is large enough for IPv4/IPv6 header")
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/geneve.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 42f31c681846..61cd3dd4deab 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -891,7 +891,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev,
__be16 sport;
int err;
- if (!pskb_network_may_pull(skb, sizeof(struct iphdr)))
+ if (!pskb_inet_may_pull(skb))
return -EINVAL;
sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
@@ -988,7 +988,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
__be16 sport;
int err;
- if (!pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))
+ if (!pskb_inet_may_pull(skb))
return -EINVAL;
sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 640/677] selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (638 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 639/677] net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 641/677] selftests: mlxsw: Remove a redundant if statement in port_scale test Greg Kroah-Hartman
` (43 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Petr Machata, Ido Schimmel,
David S. Miller, Sasha Levin
From: Petr Machata <petrm@nvidia.com>
[ Upstream commit c8d0260cdd96fdccdef0509c4160e28a1012a5d7 ]
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117aec ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.
To fix the issue, mark the FDB entry as static.
Fixes: 9c7c8a82442c ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
index c02291e9841e..880e3ab9d088 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -271,7 +271,7 @@ test_span_gre_fdb_roaming()
while ((RET == 0)); do
bridge fdb del dev $swp3 $h3mac vlan 555 master 2>/dev/null
- bridge fdb add dev $swp2 $h3mac vlan 555 master
+ bridge fdb add dev $swp2 $h3mac vlan 555 master static
sleep 1
fail_test_span_gre_dir $tundev ingress
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 641/677] selftests: mlxsw: Remove a redundant if statement in port_scale test
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (639 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 640/677] selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 642/677] selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test Greg Kroah-Hartman
` (42 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ido Schimmel, Danielle Ratson,
Petr Machata, David S. Miller, Sasha Levin
From: Danielle Ratson <danieller@nvidia.com>
[ Upstream commit b6fc2f212108b3676f54d00a2c38e3bc36753980 ]
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: 5154b1b826d9b ("selftests: mlxsw: Add a scale test for physical ports")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/drivers/net/mlxsw/port_scale.sh | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh
index f813ffefc07e..65f43a7ce9c9 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh
@@ -55,10 +55,6 @@ port_test()
| jq '.[][][] | select(.name=="physical_ports") |.["occ"]')
[[ $occ -eq $max_ports ]]
- if [[ $should_fail -eq 0 ]]; then
- check_err $? "Mismatch ports number: Expected $max_ports, got $occ."
- else
- check_err_fail $should_fail $? "Reached more ports than expected"
- fi
+ check_err_fail $should_fail $? "Attempt to create $max_ports ports (actual result $occ)"
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 642/677] selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (640 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 641/677] selftests: mlxsw: Remove a redundant if statement in port_scale test Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 643/677] mptcp: Retransmit DATA_FIN Greg Kroah-Hartman
` (41 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ido Schimmel, Danielle Ratson,
Petr Machata, David S. Miller, Sasha Levin
From: Danielle Ratson <danieller@nvidia.com>
[ Upstream commit 1f1c92139e36223b89d8140f2b72f75e79baf8bd ]
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: abfce9e062021 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
index cc0f07e72cf2..aa74be9f47c8 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
@@ -98,11 +98,7 @@ __tc_flower_test()
jq -r '[ .[] | select(.kind == "flower") |
.options | .in_hw ]' | jq .[] | wc -l)
[[ $((offload_count - 1)) -eq $count ]]
- if [[ $should_fail -eq 0 ]]; then
- check_err $? "Offload mismatch"
- else
- check_err_fail $should_fail $? "Offload more than expacted"
- fi
+ check_err_fail $should_fail $? "Attempt to offload $count rules (actual result $((offload_count - 1)))"
}
tc_flower_test()
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 643/677] mptcp: Retransmit DATA_FIN
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (641 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 642/677] selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 644/677] bnxt_en: Fix RX consumer index logic in the error path Greg Kroah-Hartman
` (40 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Mat Martineau,
David S. Miller, Sasha Levin
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
[ Upstream commit 6477dd39e62c3a67cfa368ddc127410b4ae424c6 ]
With this change, the MPTCP-level retransmission timer is used to resend
DATA_FIN. The retranmit timer is not stopped while waiting for a
MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all
subflows. The retry interval starts at TCP_RTO_MIN and then doubles on
each attempt, up to TCP_RTO_MAX.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146
Fixes: 43b54c6ee382 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mptcp/protocol.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 5043c7cb0782..65e5d3eb1078 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -399,6 +399,14 @@ static bool mptcp_pending_data_fin(struct sock *sk, u64 *seq)
return false;
}
+static void mptcp_set_datafin_timeout(const struct sock *sk)
+{
+ struct inet_connection_sock *icsk = inet_csk(sk);
+
+ mptcp_sk(sk)->timer_ival = min(TCP_RTO_MAX,
+ TCP_RTO_MIN << icsk->icsk_retransmits);
+}
+
static void mptcp_set_timeout(const struct sock *sk, const struct sock *ssk)
{
long tout = ssk && inet_csk(ssk)->icsk_pending ?
@@ -1052,7 +1060,7 @@ out:
}
if (snd_una == READ_ONCE(msk->snd_nxt)) {
- if (msk->timer_ival)
+ if (msk->timer_ival && !mptcp_data_fin_enabled(msk))
mptcp_stop_timer(sk);
} else {
mptcp_reset_timer(sk);
@@ -2276,8 +2284,19 @@ static void __mptcp_retrans(struct sock *sk)
__mptcp_clean_una_wakeup(sk);
dfrag = mptcp_rtx_head(sk);
- if (!dfrag)
+ if (!dfrag) {
+ if (mptcp_data_fin_enabled(msk)) {
+ struct inet_connection_sock *icsk = inet_csk(sk);
+
+ icsk->icsk_retransmits++;
+ mptcp_set_datafin_timeout(sk);
+ mptcp_send_ack(msk);
+
+ goto reset_timer;
+ }
+
return;
+ }
ssk = mptcp_subflow_get_retrans(msk);
if (!ssk)
@@ -2460,6 +2479,8 @@ void mptcp_subflow_shutdown(struct sock *sk, struct sock *ssk, int how)
pr_debug("Sending DATA_FIN on subflow %p", ssk);
mptcp_set_timeout(sk, ssk);
tcp_send_ack(ssk);
+ if (!mptcp_timer_pending(sk))
+ mptcp_reset_timer(sk);
}
break;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 644/677] bnxt_en: Fix RX consumer index logic in the error path.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (642 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 643/677] mptcp: Retransmit DATA_FIN Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 645/677] KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM Greg Kroah-Hartman
` (39 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavan Chebbi, Andy Gospodarek,
Michael Chan, David S. Miller, Sasha Levin
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit bbd6f0a948139970f4a615dff189d9a503681a39 ]
In bnxt_rx_pkt(), the RX buffers are expected to complete in order.
If the RX consumer index indicates an out of order buffer completion,
it means we are hitting a hardware bug and the driver will abort all
remaining RX packets and reset the RX ring. The RX consumer index
that we pass to bnxt_discard_rx() is not correct. We should be
passing the current index (tmp_raw_cons) instead of the old index
(raw_cons). This bug can cause us to be at the wrong index when
trying to abort the next RX packet. It can crash like this:
#0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007
#1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232
#2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e
#3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978
#4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0
#5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e
#6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24
#7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e
#8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12
#9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5
[exception RIP: bnxt_rx_pkt+237]
RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213
RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000
RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000
RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d
R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0
R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
Fixes: a1b0e4e684e9 ("bnxt_en: Improve RX consumer index validity check.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index aeb8c61c0f87..73239d3eaca1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1732,14 +1732,16 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
cons = rxcmp->rx_cmp_opaque;
if (unlikely(cons != rxr->rx_next_cons)) {
- int rc1 = bnxt_discard_rx(bp, cpr, raw_cons, rxcmp);
+ int rc1 = bnxt_discard_rx(bp, cpr, &tmp_raw_cons, rxcmp);
/* 0xffff is forced error, don't print it */
if (rxr->rx_next_cons != 0xffff)
netdev_warn(bp->dev, "RX cons %x != expected cons %x\n",
cons, rxr->rx_next_cons);
bnxt_sched_reset(bp, rxr);
- return rc1;
+ if (rc1)
+ return rc1;
+ goto next_rx_no_prod_no_len;
}
rx_buf = &rxr->rx_buf_ring[cons];
data = rx_buf->data;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 645/677] KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (643 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 644/677] bnxt_en: Fix RX consumer index logic in the error path Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 646/677] KVM: SVM: Zero out the VMCB array used to track SEV ASID association Greg Kroah-Hartman
` (38 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Christopherson, Paolo Bonzini,
Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit dbdd096a5a74b94f6b786a47baef2085859b0dce ]
Disable pass-through of the FS and GS base MSRs for 32-bit KVM. Intel's
SDM unequivocally states that the MSRs exist if and only if the CPU
supports x86-64. FS_BASE and GS_BASE are mostly a non-issue; a clever
guest could opportunistically use the MSRs without issue. KERNEL_GS_BASE
is a bigger problem, as a clever guest would subtly be broken if it were
migrated, as KVM disallows software access to the MSRs, and unlike the
direct variants, KERNEL_GS_BASE needs to be explicitly migrated as it's
not captured in the VMCS.
Fixes: 25c5f225beda ("KVM: VMX: Enable MSR Bitmap feature")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422023831.3473491-1-seanjc@google.com>
[*NOT* for stable kernels. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/vmx/nested.c | 2 ++
arch/x86/kvm/vmx/vmx.c | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 4a44d24bf733..1727057c5313 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -619,6 +619,7 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
}
/* KVM unconditionally exposes the FS/GS base MSRs to L1. */
+#ifdef CONFIG_X86_64
nested_vmx_disable_intercept_for_msr(msr_bitmap_l1, msr_bitmap_l0,
MSR_FS_BASE, MSR_TYPE_RW);
@@ -627,6 +628,7 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
nested_vmx_disable_intercept_for_msr(msr_bitmap_l1, msr_bitmap_l0,
MSR_KERNEL_GS_BASE, MSR_TYPE_RW);
+#endif
/*
* Checking the L0->L1 bitmap is trying to verify two things:
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index db50ee04ad37..f705e0d9f161 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -156,9 +156,11 @@ static u32 vmx_possible_passthrough_msrs[MAX_POSSIBLE_PASSTHROUGH_MSRS] = {
MSR_IA32_SPEC_CTRL,
MSR_IA32_PRED_CMD,
MSR_IA32_TSC,
+#ifdef CONFIG_X86_64
MSR_FS_BASE,
MSR_GS_BASE,
MSR_KERNEL_GS_BASE,
+#endif
MSR_IA32_SYSENTER_CS,
MSR_IA32_SYSENTER_ESP,
MSR_IA32_SYSENTER_EIP,
@@ -6935,9 +6937,11 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu)
bitmap_fill(vmx->shadow_msr_intercept.write, MAX_POSSIBLE_PASSTHROUGH_MSRS);
vmx_disable_intercept_for_msr(vcpu, MSR_IA32_TSC, MSR_TYPE_R);
+#ifdef CONFIG_X86_64
vmx_disable_intercept_for_msr(vcpu, MSR_FS_BASE, MSR_TYPE_RW);
vmx_disable_intercept_for_msr(vcpu, MSR_GS_BASE, MSR_TYPE_RW);
vmx_disable_intercept_for_msr(vcpu, MSR_KERNEL_GS_BASE, MSR_TYPE_RW);
+#endif
vmx_disable_intercept_for_msr(vcpu, MSR_IA32_SYSENTER_CS, MSR_TYPE_RW);
vmx_disable_intercept_for_msr(vcpu, MSR_IA32_SYSENTER_ESP, MSR_TYPE_RW);
vmx_disable_intercept_for_msr(vcpu, MSR_IA32_SYSENTER_EIP, MSR_TYPE_RW);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 646/677] KVM: SVM: Zero out the VMCB array used to track SEV ASID association
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (644 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 645/677] KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 647/677] KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails Greg Kroah-Hartman
` (37 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Borislav Petkov, Tom Lendacky,
Brijesh Singh, Sean Christopherson, Paolo Bonzini, Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit 3b1902b87bf11f1c6a84368470dc13da6f3da3bd ]
Zero out the array of VMCB pointers so that pre_sev_run() won't see
garbage when querying the array to detect when an SEV ASID is being
associated with a new VMCB. In practice, reading random values is all
but guaranteed to be benign as a false negative (which is extremely
unlikely on its own) can only happen on CPU0 on the first VMRUN and would
only cause KVM to skip the ASID flush. For anything bad to happen, a
previous instance of KVM would have to exit without flushing the ASID,
_and_ KVM would have to not flush the ASID at any time while building the
new SEV guest.
Cc: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Fixes: 70cd94e60c73 ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/svm/svm.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 9c260c73f334..d5620361eae7 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -564,9 +564,8 @@ static int svm_cpu_init(int cpu)
clear_page(page_address(sd->save_area));
if (svm_sev_enabled()) {
- sd->sev_vmcbs = kmalloc_array(max_sev_asid + 1,
- sizeof(void *),
- GFP_KERNEL);
+ sd->sev_vmcbs = kcalloc(max_sev_asid + 1, sizeof(void *),
+ GFP_KERNEL);
if (!sd->sev_vmcbs)
goto free_save_area;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 647/677] KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (645 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 646/677] KVM: SVM: Zero out the VMCB array used to track SEV ASID association Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 648/677] KVM: SVM: Disable SEV/SEV-ES if NPT is disabled Greg Kroah-Hartman
` (36 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tom Lendacky, Sean Christopherson,
Paolo Bonzini, Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit f31b88b35f90f6b7ae4abc1015494a285f459221 ]
Free sev_asid_bitmap if the reclaim bitmap allocation fails, othwerise
KVM will unnecessarily keep the bitmap when SEV is not fully enabled.
Freeing the page is also necessary to avoid introducing a bug when a
future patch eliminates svm_sev_enabled() in favor of using the global
'sev' flag directly. While sev_hardware_enabled() checks max_sev_asid,
which is true even if KVM setup fails, 'sev' will be true if and only
if KVM setup fully succeeds.
Fixes: 33af3a7ef9e6 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/svm/sev.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index d5ccb929643a..019130011d0f 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -1348,8 +1348,11 @@ void __init sev_hardware_setup(void)
goto out;
sev_reclaim_asid_bitmap = bitmap_zalloc(max_sev_asid, GFP_KERNEL);
- if (!sev_reclaim_asid_bitmap)
+ if (!sev_reclaim_asid_bitmap) {
+ bitmap_free(sev_asid_bitmap);
+ sev_asid_bitmap = NULL;
goto out;
+ }
pr_info("SEV supported: %u ASIDs\n", max_sev_asid - min_sev_asid + 1);
sev_supported = true;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 648/677] KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (646 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 647/677] KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 649/677] net/sched: act_ct: fix wild memory access when clearing fragments Greg Kroah-Hartman
` (35 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tom Lendacky, Sean Christopherson,
Paolo Bonzini, Sasha Levin
From: Sean Christopherson <seanjc@google.com>
[ Upstream commit fa13680f5668cff05302a2f4753c49334a83a064 ]
Disable SEV and SEV-ES if NPT is disabled. While the APM doesn't clearly
state that NPT is mandatory, it's alluded to by:
The guest page tables, managed by the guest, may mark data memory pages
as either private or shared, thus allowing selected pages to be shared
outside the guest.
And practically speaking, shadow paging can't work since KVM can't read
the guest's page tables.
Fixes: e9df09428996 ("KVM: SVM: Add sev module_param")
Cc: Brijesh Singh <brijesh.singh@amd.com
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422021125.3417167-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kvm/svm/svm.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index d5620361eae7..309725151313 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -968,21 +968,6 @@ static __init int svm_hardware_setup(void)
kvm_enable_efer_bits(EFER_SVME | EFER_LMSLE);
}
- if (IS_ENABLED(CONFIG_KVM_AMD_SEV) && sev) {
- sev_hardware_setup();
- } else {
- sev = false;
- sev_es = false;
- }
-
- svm_adjust_mmio_mask();
-
- for_each_possible_cpu(cpu) {
- r = svm_cpu_init(cpu);
- if (r)
- goto err;
- }
-
/*
* KVM's MMU doesn't support using 2-level paging for itself, and thus
* NPT isn't supported if the host is using 2-level paging since host
@@ -997,6 +982,21 @@ static __init int svm_hardware_setup(void)
kvm_configure_mmu(npt_enabled, get_max_npt_level(), PG_LEVEL_1G);
pr_info("kvm: Nested Paging %sabled\n", npt_enabled ? "en" : "dis");
+ if (IS_ENABLED(CONFIG_KVM_AMD_SEV) && sev && npt_enabled) {
+ sev_hardware_setup();
+ } else {
+ sev = false;
+ sev_es = false;
+ }
+
+ svm_adjust_mmio_mask();
+
+ for_each_possible_cpu(cpu) {
+ r = svm_cpu_init(cpu);
+ if (r)
+ goto err;
+ }
+
if (nrips) {
if (!boot_cpu_has(X86_FEATURE_NRIPS))
nrips = false;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 649/677] net/sched: act_ct: fix wild memory access when clearing fragments
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (647 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 648/677] KVM: SVM: Disable SEV/SEV-ES if NPT is disabled Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 650/677] net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send Greg Kroah-Hartman
` (34 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shuang Li, Davide Caratti,
David S. Miller, Sasha Levin
From: Davide Caratti <dcaratti@redhat.com>
[ Upstream commit f77bd544a6bbe69aa50d9ed09f13494cf36ff806 ]
while testing re-assembly/re-fragmentation using act_ct, it's possible to
observe a crash like the following one:
KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f]
CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S 5.12.0-rc7+ #424
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0
Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48
RSP: 0018:ffff888c31449db8 EFLAGS: 00010203
RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960
RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e
RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350
R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000
R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160
FS: 0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_frag_destroy+0xa9/0x150
call_timer_fn+0x2d/0x180
run_timer_softirq+0x4fe/0xe70
__do_softirq+0x197/0x5a0
irq_exit_rcu+0x1de/0x200
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb
results in putting random data in FRAG_CB(), and this causes those "wild"
memory accesses later, when the rbtree is purged. Never overwrite the skb
cb in case tcf_ct_handle_fragments() returns -EINPROGRESS.
Fixes: ae372cb1750f ("net/sched: act_ct: fix restore the qdisc_skb_cb after defrag")
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/act_ct.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 16e888a9601d..48fdf7293dea 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -732,7 +732,8 @@ static int tcf_ct_handle_fragments(struct net *net, struct sk_buff *skb,
#endif
}
- *qdisc_skb_cb(skb) = cb;
+ if (err != -EINPROGRESS)
+ *qdisc_skb_cb(skb) = cb;
skb_clear_hash(skb);
skb->ignore_df = 1;
return err;
@@ -967,7 +968,7 @@ static int tcf_ct_act(struct sk_buff *skb, const struct tc_action *a,
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err == -EINPROGRESS) {
retval = TC_ACT_STOLEN;
- goto out;
+ goto out_clear;
}
if (err)
goto drop;
@@ -1030,7 +1031,6 @@ do_nat:
out_push:
skb_push_rcsum(skb, nh_ofs);
-out:
qdisc_skb_cb(skb)->post_ct = true;
out_clear:
tcf_action_update_bstats(&c->common, skb);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 650/677] net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (648 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 649/677] net/sched: act_ct: fix wild memory access when clearing fragments Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 651/677] selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro Greg Kroah-Hartman
` (33 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, David S. Miller, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 6d72e7c767acbbdd44ebc7d89c6690b405b32b57 ]
In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..).
If some error happens in emac_tx_fill_tpd(), the skb will be freed via
dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd().
But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len).
As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len,
thus my patch assigns skb->len to 'len' before the possible free and
use 'len' instead of skb->len later.
Fixes: b9b17debc69d2 ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qualcomm/emac/emac-mac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index 117188e3c7de..87b8c032195d 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -1437,6 +1437,7 @@ netdev_tx_t emac_mac_tx_buf_send(struct emac_adapter *adpt,
{
struct emac_tpd tpd;
u32 prod_idx;
+ int len;
memset(&tpd, 0, sizeof(tpd));
@@ -1456,9 +1457,10 @@ netdev_tx_t emac_mac_tx_buf_send(struct emac_adapter *adpt,
if (skb_network_offset(skb) != ETH_HLEN)
TPD_TYP_SET(&tpd, 1);
+ len = skb->len;
emac_tx_fill_tpd(adpt, tx_q, skb, &tpd);
- netdev_sent_queue(adpt->netdev, skb->len);
+ netdev_sent_queue(adpt->netdev, len);
/* Make sure the are enough free descriptors to hold one
* maximum-sized SKB. We need one desc for each fragment,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 651/677] selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (649 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 650/677] net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 652/677] selftests/bpf: Fix field existence CO-RE reloc tests Greg Kroah-Hartman
` (32 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, Alexei Starovoitov,
Lorenz Bauer, Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit 0f20615d64ee2ad5e2a133a812382d0c4071589b ]
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable
bitfields. Missing breaks in a switch caused 8-byte reads always. This can
confuse libbpf because it does strict checks that memory load size corresponds
to the original size of the field, which in this case quite often would be
wrong.
After fixing that, we run into another problem, which quite subtle, so worth
documenting here. The issue is in Clang optimization and CO-RE relocation
interactions. Without that asm volatile construct (also known as
barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and
will apply BYTE_OFFSET 4 times for each switch case arm. This will result in
the same error from libbpf about mismatch of memory load size and original
field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *),
*(u32 *), and *(u64 *) memory loads, three of which will fail. Using
barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to
calculate p, after which value of p is used without relocation in each of
switch case arms, doing appropiately-sized memory load.
Here's the list of relevant relocations and pieces of generated BPF code
before and after this patch for test_core_reloc_bitfields_direct selftests.
BEFORE
=====
#45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
#46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
160: b7 02 00 00 04 00 00 00 r2 = 4
; BYTE_SIZE relocation here ^^^
161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63>
162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65>
163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66>
164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69>
0000000000000528 <LBB0_66>:
165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69>
0000000000000548 <LBB0_63>:
169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67>
170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68>
171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69>
0000000000000560 <LBB0_68>:
172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69>
0000000000000580 <LBB0_65>:
176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
00000000000005a0 <LBB0_67>:
180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8)
; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^
00000000000005b8 <LBB0_69>:
183: 67 01 00 00 20 00 00 00 r1 <<= 32
184: b7 02 00 00 00 00 00 00 r2 = 0
185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
186: c7 01 00 00 20 00 00 00 r1 s>>= 32
187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000005e0 <LBB0_71>:
188: 77 01 00 00 20 00 00 00 r1 >>= 32
AFTER
=====
#30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
132: b7 01 00 00 08 00 00 00 r1 = 8
; BYTE_OFFSET relo here ^^^
; no size check for non-memory dereferencing instructions
133: 0f 12 00 00 00 00 00 00 r2 += r1
134: b7 03 00 00 04 00 00 00 r3 = 4
; BYTE_SIZE relocation here ^^^
135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63>
136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65>
137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66>
138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69>
0000000000000458 <LBB0_66>:
139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69>
0000000000000468 <LBB0_63>:
141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67>
142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68>
143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69>
0000000000000480 <LBB0_68>:
144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
0000000000000490 <LBB0_65>:
146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69>
00000000000004a0 <LBB0_67>:
148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
00000000000004a8 <LBB0_69>:
149: 67 01 00 00 20 00 00 00 r1 <<= 32
150: b7 02 00 00 00 00 00 00 r2 = 0
151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
152: c7 01 00 00 20 00 00 00 r1 s>>= 32
153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000004d0 <LBB0_71>:
154: 77 01 00 00 20 00 00 00 r1 >>= 323
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/bpf_core_read.h | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/tools/lib/bpf/bpf_core_read.h b/tools/lib/bpf/bpf_core_read.h
index 53b3e199fb25..09ebe3db5f2f 100644
--- a/tools/lib/bpf/bpf_core_read.h
+++ b/tools/lib/bpf/bpf_core_read.h
@@ -88,11 +88,19 @@ enum bpf_enum_value_kind {
const void *p = (const void *)s + __CORE_RELO(s, field, BYTE_OFFSET); \
unsigned long long val; \
\
+ /* This is a so-called barrier_var() operation that makes specified \
+ * variable "a black box" for optimizing compiler. \
+ * It forces compiler to perform BYTE_OFFSET relocation on p and use \
+ * its calculated value in the switch below, instead of applying \
+ * the same relocation 4 times for each individual memory load. \
+ */ \
+ asm volatile("" : "=r"(p) : "0"(p)); \
+ \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
- case 1: val = *(const unsigned char *)p; \
- case 2: val = *(const unsigned short *)p; \
- case 4: val = *(const unsigned int *)p; \
- case 8: val = *(const unsigned long long *)p; \
+ case 1: val = *(const unsigned char *)p; break; \
+ case 2: val = *(const unsigned short *)p; break; \
+ case 4: val = *(const unsigned int *)p; break; \
+ case 8: val = *(const unsigned long long *)p; break; \
} \
val <<= __CORE_RELO(s, field, LSHIFT_U64); \
if (__CORE_RELO(s, field, SIGNED)) \
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 652/677] selftests/bpf: Fix field existence CO-RE reloc tests
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (650 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 651/677] selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 653/677] selftests/bpf: Fix core_reloc test runner Greg Kroah-Hartman
` (31 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenz Bauer, Andrii Nakryiko,
Alexei Starovoitov, Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit 5a30eb23922b52f33222c6729b6b3ff1c37a6c66 ]
Negative field existence cases for have a broken assumption that FIELD_EXISTS
CO-RE relo will fail for fields that match the name but have incompatible type
signature. That's not how CO-RE relocations generally behave. Types and fields
that match by name but not by expected type are treated as non-matching
candidates and are skipped. Error later is reported if no matching candidate
was found. That's what happens for most relocations, but existence relocations
(FIELD_EXISTS and TYPE_EXISTS) are more permissive and they are designed to
return 0 or 1, depending if a match is found. This allows to handle
name-conflicting but incompatible types in BPF code easily. Combined with
___flavor suffixes, it's possible to handle pretty much any structural type
changes in kernel within the compiled once BPF source code.
So, long story short, negative field existence test cases are invalid in their
assumptions, so this patch reworks them into a single consolidated positive
case that doesn't match any of the fields.
Fixes: c7566a69695c ("selftests/bpf: Add field existence CO-RE relocs tests")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-5-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../selftests/bpf/prog_tests/core_reloc.c | 31 ++++++++++++-------
...ore_reloc_existence___err_wrong_arr_kind.c | 3 --
...loc_existence___err_wrong_arr_value_type.c | 3 --
...ore_reloc_existence___err_wrong_int_kind.c | 3 --
..._core_reloc_existence___err_wrong_int_sz.c | 3 --
...ore_reloc_existence___err_wrong_int_type.c | 3 --
..._reloc_existence___err_wrong_struct_type.c | 3 --
..._core_reloc_existence___wrong_field_defs.c | 3 ++
.../selftests/bpf/progs/core_reloc_types.h | 20 ++----------
9 files changed, 24 insertions(+), 48 deletions(-)
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_kind.c
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_value_type.c
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_kind.c
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_sz.c
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_type.c
delete mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_struct_type.c
create mode 100644 tools/testing/selftests/bpf/progs/btf__core_reloc_existence___wrong_field_defs.c
diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index 06eb956ff7bb..cd3ba54a1f68 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -210,11 +210,6 @@ static int duration = 0;
.bpf_obj_file = "test_core_reloc_existence.o", \
.btf_src_file = "btf__core_reloc_" #name ".o" \
-#define FIELD_EXISTS_ERR_CASE(name) { \
- FIELD_EXISTS_CASE_COMMON(name), \
- .fails = true, \
-}
-
#define BITFIELDS_CASE_COMMON(objfile, test_name_prefix, name) \
.case_name = test_name_prefix#name, \
.bpf_obj_file = objfile, \
@@ -642,13 +637,25 @@ static struct core_reloc_test_case test_cases[] = {
},
.output_len = sizeof(struct core_reloc_existence_output),
},
-
- FIELD_EXISTS_ERR_CASE(existence__err_int_sz),
- FIELD_EXISTS_ERR_CASE(existence__err_int_type),
- FIELD_EXISTS_ERR_CASE(existence__err_int_kind),
- FIELD_EXISTS_ERR_CASE(existence__err_arr_kind),
- FIELD_EXISTS_ERR_CASE(existence__err_arr_value_type),
- FIELD_EXISTS_ERR_CASE(existence__err_struct_type),
+ {
+ FIELD_EXISTS_CASE_COMMON(existence___wrong_field_defs),
+ .input = STRUCT_TO_CHAR_PTR(core_reloc_existence___wrong_field_defs) {
+ },
+ .input_len = sizeof(struct core_reloc_existence___wrong_field_defs),
+ .output = STRUCT_TO_CHAR_PTR(core_reloc_existence_output) {
+ .a_exists = 0,
+ .b_exists = 0,
+ .c_exists = 0,
+ .arr_exists = 0,
+ .s_exists = 0,
+ .a_value = 0xff000001u,
+ .b_value = 0xff000002u,
+ .c_value = 0xff000003u,
+ .arr_value = 0xff000004u,
+ .s_value = 0xff000005u,
+ },
+ .output_len = sizeof(struct core_reloc_existence_output),
+ },
/* bitfield relocation checks */
BITFIELDS_CASE(bitfields, {
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_kind.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_kind.c
deleted file mode 100644
index dd0ffa518f36..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_kind.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_arr_kind x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_value_type.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_value_type.c
deleted file mode 100644
index bc83372088ad..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_arr_value_type.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_arr_value_type x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_kind.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_kind.c
deleted file mode 100644
index 917bec41be08..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_kind.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_int_kind x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_sz.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_sz.c
deleted file mode 100644
index 6ec7e6ec1c91..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_sz.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_int_sz x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_type.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_type.c
deleted file mode 100644
index 7bbcacf2b0d1..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_int_type.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_int_type x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_struct_type.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_struct_type.c
deleted file mode 100644
index f384dd38ec70..000000000000
--- a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___err_wrong_struct_type.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "core_reloc_types.h"
-
-void f(struct core_reloc_existence___err_wrong_struct_type x) {}
diff --git a/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___wrong_field_defs.c b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___wrong_field_defs.c
new file mode 100644
index 000000000000..d14b496190c3
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/btf__core_reloc_existence___wrong_field_defs.c
@@ -0,0 +1,3 @@
+#include "core_reloc_types.h"
+
+void f(struct core_reloc_existence___wrong_field_defs x) {}
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h
index 9a2850850121..664eea1013aa 100644
--- a/tools/testing/selftests/bpf/progs/core_reloc_types.h
+++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h
@@ -700,27 +700,11 @@ struct core_reloc_existence___minimal {
int a;
};
-struct core_reloc_existence___err_wrong_int_sz {
- short a;
-};
-
-struct core_reloc_existence___err_wrong_int_type {
+struct core_reloc_existence___wrong_field_defs {
+ void *a;
int b[1];
-};
-
-struct core_reloc_existence___err_wrong_int_kind {
struct{ int x; } c;
-};
-
-struct core_reloc_existence___err_wrong_arr_kind {
int arr;
-};
-
-struct core_reloc_existence___err_wrong_arr_value_type {
- short arr[1];
-};
-
-struct core_reloc_existence___err_wrong_struct_type {
int s;
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 653/677] selftests/bpf: Fix core_reloc test runner
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (651 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 652/677] selftests/bpf: Fix field existence CO-RE reloc tests Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 654/677] bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds Greg Kroah-Hartman
` (30 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenz Bauer, Andrii Nakryiko,
Alexei Starovoitov, Sasha Levin
From: Andrii Nakryiko <andrii@kernel.org>
[ Upstream commit bede0ebf0be87e9678103486a77f39e0334c6791 ]
Fix failed tests checks in core_reloc test runner, which allowed failing tests
to pass quietly. Also add extra check to make sure that expected to fail test cases with
invalid names are caught as test failure anyway, as this is not an expected
failure mode. Also fix mislabeled probed vs direct bitfield test cases.
Fixes: 124a892d1c41 ("selftests/bpf: Test TYPE_EXISTS and TYPE_SIZE CO-RE relocations")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../selftests/bpf/prog_tests/core_reloc.c | 20 +++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index cd3ba54a1f68..4b517d76257d 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -217,7 +217,7 @@ static int duration = 0;
#define BITFIELDS_CASE(name, ...) { \
BITFIELDS_CASE_COMMON("test_core_reloc_bitfields_probed.o", \
- "direct:", name), \
+ "probed:", name), \
.input = STRUCT_TO_CHAR_PTR(core_reloc_##name) __VA_ARGS__, \
.input_len = sizeof(struct core_reloc_##name), \
.output = STRUCT_TO_CHAR_PTR(core_reloc_bitfields_output) \
@@ -225,7 +225,7 @@ static int duration = 0;
.output_len = sizeof(struct core_reloc_bitfields_output), \
}, { \
BITFIELDS_CASE_COMMON("test_core_reloc_bitfields_direct.o", \
- "probed:", name), \
+ "direct:", name), \
.input = STRUCT_TO_CHAR_PTR(core_reloc_##name) __VA_ARGS__, \
.input_len = sizeof(struct core_reloc_##name), \
.output = STRUCT_TO_CHAR_PTR(core_reloc_bitfields_output) \
@@ -545,8 +545,7 @@ static struct core_reloc_test_case test_cases[] = {
ARRAYS_ERR_CASE(arrays___err_too_small),
ARRAYS_ERR_CASE(arrays___err_too_shallow),
ARRAYS_ERR_CASE(arrays___err_non_array),
- ARRAYS_ERR_CASE(arrays___err_wrong_val_type1),
- ARRAYS_ERR_CASE(arrays___err_wrong_val_type2),
+ ARRAYS_ERR_CASE(arrays___err_wrong_val_type),
ARRAYS_ERR_CASE(arrays___err_bad_zero_sz_arr),
/* enum/ptr/int handling scenarios */
@@ -864,13 +863,20 @@ void test_core_reloc(void)
"prog '%s' not found\n", probe_name))
goto cleanup;
+
+ if (test_case->btf_src_file) {
+ err = access(test_case->btf_src_file, R_OK);
+ if (!ASSERT_OK(err, "btf_src_file"))
+ goto cleanup;
+ }
+
load_attr.obj = obj;
load_attr.log_level = 0;
load_attr.target_btf_path = test_case->btf_src_file;
err = bpf_object__load_xattr(&load_attr);
if (err) {
if (!test_case->fails)
- CHECK(false, "obj_load", "failed to load prog '%s': %d\n", probe_name, err);
+ ASSERT_OK(err, "obj_load");
goto cleanup;
}
@@ -909,10 +915,8 @@ void test_core_reloc(void)
goto cleanup;
}
- if (test_case->fails) {
- CHECK(false, "obj_load_fail", "should fail to load prog '%s'\n", probe_name);
+ if (!ASSERT_FALSE(test_case->fails, "obj_load_should_fail"))
goto cleanup;
- }
equal = memcmp(data->out, test_case->output,
test_case->output_len) == 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 654/677] bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (652 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 653/677] selftests/bpf: Fix core_reloc test runner Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 655/677] RDMA/siw: Fix a use after free in siw_alloc_mr Greg Kroah-Hartman
` (29 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Sasha Levin
From: Daniel Borkmann <daniel@iogearbox.net>
[ Upstream commit 10bf4e83167cc68595b85fd73bb91e8f2c086e36 ]
Similarly as b02709587ea3 ("bpf: Fix propagation of 32-bit signed bounds
from 64-bit bounds."), we also need to fix the propagation of 32 bit
unsigned bounds from 64 bit counterparts. That is, really only set the
u32_{min,max}_value when /both/ {umin,umax}_value safely fit in 32 bit
space. For example, the register with a umin_value == 1 does /not/ imply
that u32_min_value is also equal to 1, since umax_value could be much
larger than 32 bit subregister can hold, and thus u32_min_value is in
the interval [0,1] instead.
Before fix, invalid tracking result of R2_w=inv1:
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smin_value=-9223372036854775807,smax_value=9223372032559808513,umin_value=1,umax_value=18446744069414584321,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv1 R10=fp0
[...]
After fix, correct tracking result of R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)):
[...]
5: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0) R10=fp0
5: (35) if r2 >= 0x1 goto pc+1
[...] // goto path
7: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umin_value=1) R10=fp0
7: (b6) if w2 <= 0x1 goto pc+1
[...] // goto path
9: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,smax_value=9223372032559808513,umax_value=18446744069414584321,var_off=(0x0; 0xffffffff00000001),s32_min_value=0,s32_max_value=1,u32_max_value=1) R10=fp0
9: (bc) w2 = w2
10: R0=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) R10=fp0
[...]
Thus, same issue as in b02709587ea3 holds for unsigned subregister tracking.
Also, align __reg64_bound_u32() similarly to __reg64_bound_s32() as done in
b02709587ea3 to make them uniform again.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Manfred Paul (@_manfp)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/verifier.c | 8 +++-----
tools/testing/selftests/bpf/verifier/array_access.c | 2 +-
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a2ed7a7e27e2..42ec080b0ced 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1362,9 +1362,7 @@ static bool __reg64_bound_s32(s64 a)
static bool __reg64_bound_u32(u64 a)
{
- if (a > U32_MIN && a < U32_MAX)
- return true;
- return false;
+ return a > U32_MIN && a < U32_MAX;
}
static void __reg_combine_64_into_32(struct bpf_reg_state *reg)
@@ -1375,10 +1373,10 @@ static void __reg_combine_64_into_32(struct bpf_reg_state *reg)
reg->s32_min_value = (s32)reg->smin_value;
reg->s32_max_value = (s32)reg->smax_value;
}
- if (__reg64_bound_u32(reg->umin_value))
+ if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value)) {
reg->u32_min_value = (u32)reg->umin_value;
- if (__reg64_bound_u32(reg->umax_value))
reg->u32_max_value = (u32)reg->umax_value;
+ }
/* Intersecting with the old var_off might have improved our bounds
* slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
diff --git a/tools/testing/selftests/bpf/verifier/array_access.c b/tools/testing/selftests/bpf/verifier/array_access.c
index 1b138cd2b187..1b1c798e9248 100644
--- a/tools/testing/selftests/bpf/verifier/array_access.c
+++ b/tools/testing/selftests/bpf/verifier/array_access.c
@@ -186,7 +186,7 @@
},
.fixup_map_hash_48b = { 3 },
.errstr_unpriv = "R0 leaks addr",
- .errstr = "invalid access to map value, value_size=48 off=44 size=8",
+ .errstr = "R0 unbounded memory access",
.result_unpriv = REJECT,
.result = REJECT,
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 655/677] RDMA/siw: Fix a use after free in siw_alloc_mr
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (653 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 654/677] bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 656/677] RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res Greg Kroah-Hartman
` (28 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Bernard Metzler,
Jason Gunthorpe, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 3093ee182f01689b89e9f8797b321603e5de4f63 ]
Our code analyzer reported a UAF.
In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of
siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via
kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a
freed object. After, the execution continue up to the err_out branch of
siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr).
My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {}
section, to avoid the uaf.
Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Link: https://lore.kernel.org/r/20210426011647.3561-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Bernard Metzler <bmt@zurich.ihm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/siw/siw_mem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/sw/siw/siw_mem.c b/drivers/infiniband/sw/siw/siw_mem.c
index 34a910cf0edb..61c17db70d65 100644
--- a/drivers/infiniband/sw/siw/siw_mem.c
+++ b/drivers/infiniband/sw/siw/siw_mem.c
@@ -106,8 +106,6 @@ int siw_mr_add_mem(struct siw_mr *mr, struct ib_pd *pd, void *mem_obj,
mem->perms = rights & IWARP_ACCESS_MASK;
kref_init(&mem->ref);
- mr->mem = mem;
-
get_random_bytes(&next, 4);
next &= 0x00ffffff;
@@ -116,6 +114,8 @@ int siw_mr_add_mem(struct siw_mr *mr, struct ib_pd *pd, void *mem_obj,
kfree(mem);
return -ENOMEM;
}
+
+ mr->mem = mem;
/* Set the STag index part */
mem->stag = id << 8;
mr->base_mr.lkey = mr->base_mr.rkey = mem->stag;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 656/677] RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (654 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 655/677] RDMA/siw: Fix a use after free in siw_alloc_mr Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 657/677] net: bridge: mcast: fix broken length + header check for MRDv6 Adv Greg Kroah-Hartman
` (27 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, Leon Romanovsky,
Devesh Sharma, Jason Gunthorpe, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 34b39efa5ae82fc0ad0acc27653c12a56328dbbe ]
In bnxt_qplib_alloc_res, it calls bnxt_qplib_alloc_dpi_tbl(). Inside
bnxt_qplib_alloc_dpi_tbl, dpit->dbr_bar_reg_iomem is freed via
pci_iounmap() in unmap_io error branch. After the callee returns err code,
bnxt_qplib_alloc_res calls
bnxt_qplib_free_res()->bnxt_qplib_free_dpi_tbl() in the fail branch. Then
dpit->dbr_bar_reg_iomem is freed in the second time by pci_iounmap().
My patch set dpit->dbr_bar_reg_iomem to NULL after it is freed by
pci_iounmap() in the first time, to avoid the double free.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/20210426140614.6722-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/bnxt_re/qplib_res.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.c b/drivers/infiniband/hw/bnxt_re/qplib_res.c
index fa7878336100..3ca47004b752 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_res.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_res.c
@@ -854,6 +854,7 @@ static int bnxt_qplib_alloc_dpi_tbl(struct bnxt_qplib_res *res,
unmap_io:
pci_iounmap(res->pdev, dpit->dbr_bar_reg_iomem);
+ dpit->dbr_bar_reg_iomem = NULL;
return -ENOMEM;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 657/677] net: bridge: mcast: fix broken length + header check for MRDv6 Adv.
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (655 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 656/677] RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 658/677] net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE Greg Kroah-Hartman
` (26 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linus Lüssing, David S. Miller,
Sasha Levin
From: Linus Lüssing <linus.luessing@c0d3.blue>
[ Upstream commit 99014088156cd78867d19514a0bc771c4b86b93b ]
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/addrconf.h | 1 -
net/bridge/br_multicast.c | 33 ++++++++-------------------------
net/ipv6/mcast_snoop.c | 12 +++++++-----
3 files changed, 15 insertions(+), 31 deletions(-)
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 18f783dcd55f..78ea3e332688 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -233,7 +233,6 @@ void ipv6_mc_unmap(struct inet6_dev *idev);
void ipv6_mc_remap(struct inet6_dev *idev);
void ipv6_mc_init_dev(struct inet6_dev *idev);
void ipv6_mc_destroy_dev(struct inet6_dev *idev);
-int ipv6_mc_check_icmpv6(struct sk_buff *skb);
int ipv6_mc_check_mld(struct sk_buff *skb);
void addrconf_dad_failure(struct sk_buff *skb, struct inet6_ifaddr *ifp);
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 9d265447d654..229309d7b4ff 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -3152,25 +3152,14 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
}
#if IS_ENABLED(CONFIG_IPV6)
-static int br_ip6_multicast_mrd_rcv(struct net_bridge *br,
- struct net_bridge_port *port,
- struct sk_buff *skb)
+static void br_ip6_multicast_mrd_rcv(struct net_bridge *br,
+ struct net_bridge_port *port,
+ struct sk_buff *skb)
{
- int ret;
-
- if (ipv6_hdr(skb)->nexthdr != IPPROTO_ICMPV6)
- return -ENOMSG;
-
- ret = ipv6_mc_check_icmpv6(skb);
- if (ret < 0)
- return ret;
-
if (icmp6_hdr(skb)->icmp6_type != ICMPV6_MRDISC_ADV)
- return -ENOMSG;
+ return;
br_multicast_mark_router(br, port);
-
- return 0;
}
static int br_multicast_ipv6_rcv(struct net_bridge *br,
@@ -3184,18 +3173,12 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
err = ipv6_mc_check_mld(skb);
- if (err == -ENOMSG) {
+ if (err == -ENOMSG || err == -ENODATA) {
if (!ipv6_addr_is_ll_all_nodes(&ipv6_hdr(skb)->daddr))
BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-
- if (ipv6_addr_is_all_snoopers(&ipv6_hdr(skb)->daddr)) {
- err = br_ip6_multicast_mrd_rcv(br, port, skb);
-
- if (err < 0 && err != -ENOMSG) {
- br_multicast_err_count(br, port, skb->protocol);
- return err;
- }
- }
+ if (err == -ENODATA &&
+ ipv6_addr_is_all_snoopers(&ipv6_hdr(skb)->daddr))
+ br_ip6_multicast_mrd_rcv(br, port, skb);
return 0;
} else if (err < 0) {
diff --git a/net/ipv6/mcast_snoop.c b/net/ipv6/mcast_snoop.c
index d3d6b6a66e5f..04d5fcdfa6e0 100644
--- a/net/ipv6/mcast_snoop.c
+++ b/net/ipv6/mcast_snoop.c
@@ -109,7 +109,7 @@ static int ipv6_mc_check_mld_msg(struct sk_buff *skb)
struct mld_msg *mld;
if (!ipv6_mc_may_pull(skb, len))
- return -EINVAL;
+ return -ENODATA;
mld = (struct mld_msg *)skb_transport_header(skb);
@@ -122,7 +122,7 @@ static int ipv6_mc_check_mld_msg(struct sk_buff *skb)
case ICMPV6_MGM_QUERY:
return ipv6_mc_check_mld_query(skb);
default:
- return -ENOMSG;
+ return -ENODATA;
}
}
@@ -131,7 +131,7 @@ static inline __sum16 ipv6_mc_validate_checksum(struct sk_buff *skb)
return skb_checksum_validate(skb, IPPROTO_ICMPV6, ip6_compute_pseudo);
}
-int ipv6_mc_check_icmpv6(struct sk_buff *skb)
+static int ipv6_mc_check_icmpv6(struct sk_buff *skb)
{
unsigned int len = skb_transport_offset(skb) + sizeof(struct icmp6hdr);
unsigned int transport_len = ipv6_transport_len(skb);
@@ -150,7 +150,6 @@ int ipv6_mc_check_icmpv6(struct sk_buff *skb)
return 0;
}
-EXPORT_SYMBOL(ipv6_mc_check_icmpv6);
/**
* ipv6_mc_check_mld - checks whether this is a sane MLD packet
@@ -161,7 +160,10 @@ EXPORT_SYMBOL(ipv6_mc_check_icmpv6);
*
* -EINVAL: A broken packet was detected, i.e. it violates some internet
* standard
- * -ENOMSG: IP header validation succeeded but it is not an MLD packet.
+ * -ENOMSG: IP header validation succeeded but it is not an ICMPv6 packet
+ * with a hop-by-hop option.
+ * -ENODATA: IP+ICMPv6 header with hop-by-hop option validation succeeded
+ * but it is not an MLD packet.
* -ENOMEM: A memory allocation failure happened.
*
* Caller needs to set the skb network header and free any returned skb if it
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 658/677] net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (656 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 657/677] net: bridge: mcast: fix broken length + header check for MRDv6 Adv Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 659/677] net:nfc:digital: Fix a double free in digital_tg_recv_dep_req Greg Kroah-Hartman
` (25 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tobias Waldekranz, Andrew Lunn,
David S. Miller, Sasha Levin
From: Tobias Waldekranz <tobias@waldekranz.com>
[ Upstream commit 6066234aa33850e9e35e7be82d92b9e9091e774b ]
The .serdes_get_lane op used the magic value 0xff to indicate a valid
SERDES lane and 0 signaled that a non-SERDES mode was set on the port.
Unfortunately, "0" is also a valid lane ID, so even when these ports
where configured to e.g. RGMII the driver would set them up as SERDES
ports.
- Replace 0xff with 0 to indicate a valid lane ID. The number is on
the one hand just as arbitrary, but it is at least the first valid one
and therefore less of a surprise.
- Follow the other .serdes_get_lane implementations and return -ENODEV
in the case where no SERDES is assigned to the port.
Fixes: f5be107c3338 ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mv88e6xxx/serdes.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 3195936dc5be..2ce04fef698d 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -443,15 +443,15 @@ int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
{
/* There are no configurable serdes lanes on this switch chip but we
- * need to return non-zero so that callers of
+ * need to return a non-negative lane number so that callers of
* mv88e6xxx_serdes_get_lane() know this is a serdes port.
*/
switch (chip->ports[port].cmode) {
case MV88E6185_PORT_STS_CMODE_SERDES:
case MV88E6185_PORT_STS_CMODE_1000BASE_X:
- return 0xff;
- default:
return 0;
+ default:
+ return -ENODEV;
}
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 659/677] net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (657 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 658/677] net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 660/677] perf tools: Change fields type in perf_record_time_conv Greg Kroah-Hartman
` (24 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Yunlong, David S. Miller, Sasha Levin
From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
[ Upstream commit 75258586793efc521e5dd52a5bf6c7a4cf7002be ]
In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp).
If nfc_tm_data_received() failed, the callee will free the resp via
kfree_skb() and return error. But in the exit branch, the resp
will be freed again.
My patch sets resp to NULL if nfc_tm_data_received() failed, to
avoid the double free.
Fixes: 1c7a4c24fbfd9 ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/nfc/digital_dep.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/nfc/digital_dep.c b/net/nfc/digital_dep.c
index 5971fb6f51cc..dc21b4141b0a 100644
--- a/net/nfc/digital_dep.c
+++ b/net/nfc/digital_dep.c
@@ -1273,6 +1273,8 @@ static void digital_tg_recv_dep_req(struct nfc_digital_dev *ddev, void *arg,
}
rc = nfc_tm_data_received(ddev->nfc_dev, resp);
+ if (rc)
+ resp = NULL;
exit:
kfree_skb(ddev->chaining_skb);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 660/677] perf tools: Change fields type in perf_record_time_conv
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (658 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 659/677] net:nfc:digital: Fix a double free in digital_tg_recv_dep_req Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 661/677] perf jit: Let convert_timestamp() to be backwards-compatible Greg Kroah-Hartman
` (23 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Leo Yan,
Alexander Shishkin, Gustavo A. R. Silva, Ingo Molnar, Jiri Olsa,
Kan Liang, Mark Rutland, Namhyung Kim, Peter Zijlstra,
Steve MacLean, Yonatan Goldschmidt, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit e1d380ea8b00db4bb14d1f513000d4b62aa9d3f0 ]
C standard claims "An object declared as type _Bool is large enough to
store the values 0 and 1", bool type size can be 1 byte or larger than
1 byte. Thus it's uncertian for bool type size with different
compilers.
This patch changes the bool type in structure perf_record_time_conv to
__u8 type, and pads extra bytes for 8-byte alignment; this can give
reliable structure size.
Fixes: d110162cafc8 ("perf tsc: Support cap_user_time_short for event TIME_CONV")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve MacLean <Steve.MacLean@Microsoft.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20210428120915.7123-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/perf/include/perf/event.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/lib/perf/include/perf/event.h b/tools/lib/perf/include/perf/event.h
index d82054225fcc..48583e441d9b 100644
--- a/tools/lib/perf/include/perf/event.h
+++ b/tools/lib/perf/include/perf/event.h
@@ -346,8 +346,9 @@ struct perf_record_time_conv {
__u64 time_zero;
__u64 time_cycles;
__u64 time_mask;
- bool cap_user_time_zero;
- bool cap_user_time_short;
+ __u8 cap_user_time_zero;
+ __u8 cap_user_time_short;
+ __u8 reserved[6]; /* For alignment */
};
struct perf_record_header_feature {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 661/677] perf jit: Let convert_timestamp() to be backwards-compatible
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (659 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 660/677] perf tools: Change fields type in perf_record_time_conv Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 662/677] perf session: Add swap operation for event TIME_CONV Greg Kroah-Hartman
` (22 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leo Yan, Adrian Hunter,
Alexander Shishkin, Gustavo A. R. Silva, Ingo Molnar, Jiri Olsa,
Kan Liang, Mark Rutland, Namhyung Kim, Peter Zijlstra,
Steve MacLean, Yonatan Goldschmidt, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit aa616f5a8a2d22a179d5502ebd85045af66fa656 ]
Commit d110162cafc80dad ("perf tsc: Support cap_user_time_short for
event TIME_CONV") supports the extended parameters for event TIME_CONV,
but it broke the backwards compatibility, so any perf data file with old
event format fails to convert timestamp.
This patch introduces a helper event_contains() to check if an event
contains a specific member or not. For the backwards-compatibility, if
the event size confirms the extended parameters are supported in the
event TIME_CONV, then copies these parameters.
Committer notes:
To make this compiler backwards compatible add this patch:
- struct perf_tsc_conversion tc = { 0 };
+ struct perf_tsc_conversion tc = { .time_shift = 0, };
Fixes: d110162cafc8 ("perf tsc: Support cap_user_time_short for event TIME_CONV")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve MacLean <Steve.MacLean@Microsoft.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20210428120915.7123-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/perf/include/perf/event.h | 2 ++
tools/perf/util/jitdump.c | 30 +++++++++++++++++++----------
2 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/tools/lib/perf/include/perf/event.h b/tools/lib/perf/include/perf/event.h
index 48583e441d9b..4d0c02ba3f7d 100644
--- a/tools/lib/perf/include/perf/event.h
+++ b/tools/lib/perf/include/perf/event.h
@@ -8,6 +8,8 @@
#include <linux/bpf.h>
#include <sys/types.h> /* pid_t */
+#define event_contains(obj, mem) ((obj).header.size > offsetof(typeof(obj), mem))
+
struct perf_record_mmap {
struct perf_event_header header;
__u32 pid, tid;
diff --git a/tools/perf/util/jitdump.c b/tools/perf/util/jitdump.c
index 9760d8e7b386..917a9c707371 100644
--- a/tools/perf/util/jitdump.c
+++ b/tools/perf/util/jitdump.c
@@ -396,21 +396,31 @@ static pid_t jr_entry_tid(struct jit_buf_desc *jd, union jr_entry *jr)
static uint64_t convert_timestamp(struct jit_buf_desc *jd, uint64_t timestamp)
{
- struct perf_tsc_conversion tc;
+ struct perf_tsc_conversion tc = { .time_shift = 0, };
+ struct perf_record_time_conv *time_conv = &jd->session->time_conv;
if (!jd->use_arch_timestamp)
return timestamp;
- tc.time_shift = jd->session->time_conv.time_shift;
- tc.time_mult = jd->session->time_conv.time_mult;
- tc.time_zero = jd->session->time_conv.time_zero;
- tc.time_cycles = jd->session->time_conv.time_cycles;
- tc.time_mask = jd->session->time_conv.time_mask;
- tc.cap_user_time_zero = jd->session->time_conv.cap_user_time_zero;
- tc.cap_user_time_short = jd->session->time_conv.cap_user_time_short;
+ tc.time_shift = time_conv->time_shift;
+ tc.time_mult = time_conv->time_mult;
+ tc.time_zero = time_conv->time_zero;
- if (!tc.cap_user_time_zero)
- return 0;
+ /*
+ * The event TIME_CONV was extended for the fields from "time_cycles"
+ * when supported cap_user_time_short, for backward compatibility,
+ * checks the event size and assigns these extended fields if these
+ * fields are contained in the event.
+ */
+ if (event_contains(*time_conv, time_cycles)) {
+ tc.time_cycles = time_conv->time_cycles;
+ tc.time_mask = time_conv->time_mask;
+ tc.cap_user_time_zero = time_conv->cap_user_time_zero;
+ tc.cap_user_time_short = time_conv->cap_user_time_short;
+
+ if (!tc.cap_user_time_zero)
+ return 0;
+ }
return tsc_to_perf_time(timestamp, &tc);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 662/677] perf session: Add swap operation for event TIME_CONV
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (660 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 661/677] perf jit: Let convert_timestamp() to be backwards-compatible Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 663/677] ia64: ensure proper NUMA distance and possible map initialization Greg Kroah-Hartman
` (21 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Leo Yan, Adrian Hunter,
Alexander Shishkin, Gustavo A. R. Silva, Ingo Molnar, Jiri Olsa,
Kan Liang, Mark Rutland, Namhyung Kim, Peter Zijlstra,
Steve MacLean, Yonatan Goldschmidt, Arnaldo Carvalho de Melo,
Sasha Levin
From: Leo Yan <leo.yan@linaro.org>
[ Upstream commit 050ffc449008eeeafc187dec337d9cf1518f89bc ]
Since commit d110162cafc8 ("perf tsc: Support cap_user_time_short for
event TIME_CONV"), the event PERF_RECORD_TIME_CONV has extended the data
structure for clock parameters.
To be backwards-compatible, this patch adds a dedicated swap operation
for the event PERF_RECORD_TIME_CONV, based on checking if the event
contains field "time_cycles", it can support both for the old and new
event formats.
Fixes: d110162cafc8 ("perf tsc: Support cap_user_time_short for event TIME_CONV")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve MacLean <Steve.MacLean@Microsoft.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20210428120915.7123-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/session.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 859832a82496..e9d4e6f4bdf3 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -949,6 +949,19 @@ static void perf_event__stat_round_swap(union perf_event *event,
event->stat_round.time = bswap_64(event->stat_round.time);
}
+static void perf_event__time_conv_swap(union perf_event *event,
+ bool sample_id_all __maybe_unused)
+{
+ event->time_conv.time_shift = bswap_64(event->time_conv.time_shift);
+ event->time_conv.time_mult = bswap_64(event->time_conv.time_mult);
+ event->time_conv.time_zero = bswap_64(event->time_conv.time_zero);
+
+ if (event_contains(event->time_conv, time_cycles)) {
+ event->time_conv.time_cycles = bswap_64(event->time_conv.time_cycles);
+ event->time_conv.time_mask = bswap_64(event->time_conv.time_mask);
+ }
+}
+
typedef void (*perf_event__swap_op)(union perf_event *event,
bool sample_id_all);
@@ -985,7 +998,7 @@ static perf_event__swap_op perf_event__swap_ops[] = {
[PERF_RECORD_STAT] = perf_event__stat_swap,
[PERF_RECORD_STAT_ROUND] = perf_event__stat_round_swap,
[PERF_RECORD_EVENT_UPDATE] = perf_event__event_update_swap,
- [PERF_RECORD_TIME_CONV] = perf_event__all64_swap,
+ [PERF_RECORD_TIME_CONV] = perf_event__time_conv_swap,
[PERF_RECORD_HEADER_MAX] = NULL,
};
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 663/677] ia64: ensure proper NUMA distance and possible map initialization
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (661 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 662/677] perf session: Add swap operation for event TIME_CONV Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 664/677] ia64: fix EFI_DEBUG build Greg Kroah-Hartman
` (20 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Valentin Schneider,
John Paul Adrian Glaubitz, Sergei Trofimovich,
Peter Zijlstra (Intel),
Ingo Molnar, Vincent Guittot, Dietmar Eggemann, Anatoly Pugachev,
Andrew Morton, Linus Torvalds, Sasha Levin
From: Valentin Schneider <valentin.schneider@arm.com>
[ Upstream commit b22a8f7b4bde4e4ab73b64908ffd5d90ecdcdbfd ]
John Paul reported a warning about bogus NUMA distance values spurred by
commit:
620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
In this case, the afflicted machine comes up with a reported 256 possible
nodes, all of which are 0 distance away from one another. This was
previously silently ignored, but is now caught by the aforementioned
commit.
The culprit is ia64's node_possible_map which remains unchanged from its
initialization value of NODE_MASK_ALL. In John's case, the machine
doesn't have any SRAT nor SLIT table, but AIUI the possible map remains
untouched regardless of what ACPI tables end up being parsed. Thus,
!online && possible nodes remain with a bogus distance of 0 (distances \in
[0, 9] are "reserved and have no meaning" as per the ACPI spec).
Follow x86 / drivers/base/arch_numa's example and set the possible map to
the parsed map, which in this case seems to be the online map.
Link: http://lore.kernel.org/r/255d6b5d-194e-eb0e-ecdd-97477a534441@physik.fu-berlin.de
Link: https://lkml.kernel.org/r/20210318130617.896309-1-valentin.schneider@arm.com
Fixes: 620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/ia64/kernel/acpi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index a5636524af76..e2af6b172200 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -446,7 +446,8 @@ void __init acpi_numa_fixup(void)
if (srat_num_cpus == 0) {
node_set_online(0);
node_cpuid[0].phys_id = hard_smp_processor_id();
- return;
+ slit_distance(0, 0) = LOCAL_DISTANCE;
+ goto out;
}
/*
@@ -489,7 +490,7 @@ void __init acpi_numa_fixup(void)
for (j = 0; j < MAX_NUMNODES; j++)
slit_distance(i, j) = i == j ?
LOCAL_DISTANCE : REMOTE_DISTANCE;
- return;
+ goto out;
}
memset(numa_slit, -1, sizeof(numa_slit));
@@ -514,6 +515,8 @@ void __init acpi_numa_fixup(void)
printk("\n");
}
#endif
+out:
+ node_possible_map = node_online_map;
}
#endif /* CONFIG_ACPI_NUMA */
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 664/677] ia64: fix EFI_DEBUG build
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (662 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 663/677] ia64: ensure proper NUMA distance and possible map initialization Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 665/677] kfifo: fix ternary sign extension bugs Greg Kroah-Hartman
` (19 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergei Trofimovich, Ard Biesheuvel,
Andrew Morton, Linus Torvalds, Sasha Levin
From: Sergei Trofimovich <slyfox@gentoo.org>
[ Upstream commit e3db00b79d74caaf84cd9e1d4927979abfd0d7c9 ]
When enabled local debugging via `#define EFI_DEBUG 1` noticed build
failure:
arch/ia64/kernel/efi.c:564:8: error: 'i' undeclared (first use in this function)
While at it fixed benign string format mismatches visible only when
EFI_DEBUG is enabled:
arch/ia64/kernel/efi.c:589:11:
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Wformat=]
Link: https://lkml.kernel.org/r/20210328212246.685601-1-slyfox@gentoo.org
Fixes: 14fb42090943559 ("efi: Merge EFI system table revision and vendor checks")
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/ia64/kernel/efi.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index c5fe21de46a8..31149e41f9be 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -415,10 +415,10 @@ efi_get_pal_addr (void)
mask = ~((1 << IA64_GRANULE_SHIFT) - 1);
printk(KERN_INFO "CPU %d: mapping PAL code "
- "[0x%lx-0x%lx) into [0x%lx-0x%lx)\n",
- smp_processor_id(), md->phys_addr,
- md->phys_addr + efi_md_size(md),
- vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
+ "[0x%llx-0x%llx) into [0x%llx-0x%llx)\n",
+ smp_processor_id(), md->phys_addr,
+ md->phys_addr + efi_md_size(md),
+ vaddr & mask, (vaddr & mask) + IA64_GRANULE_SIZE);
#endif
return __va(md->phys_addr);
}
@@ -560,6 +560,7 @@ efi_init (void)
{
efi_memory_desc_t *md;
void *p;
+ unsigned int i;
for (i = 0, p = efi_map_start; p < efi_map_end;
++i, p += efi_desc_size)
@@ -586,7 +587,7 @@ efi_init (void)
}
printk("mem%02d: %s "
- "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
+ "range=[0x%016llx-0x%016llx) (%4lu%s)\n",
i, efi_md_typeattr_format(buf, sizeof(buf), md),
md->phys_addr,
md->phys_addr + efi_md_size(md), size, unit);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 665/677] kfifo: fix ternary sign extension bugs
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (663 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 664/677] ia64: fix EFI_DEBUG build Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 666/677] mm, slub: enable slub_debug static key when creating cache with explicit debug flags Greg Kroah-Hartman
` (18 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Stefani Seibold,
Andrew Morton, Linus Torvalds, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 926ee00ea24320052b46745ef4b00d91c05bd03d ]
The intent with this code was to return negative error codes but instead
it returns positives.
The problem is how type promotion works with ternary operations. These
functions return long, "ret" is an int and "copied" is a u32. The
negative error code is first cast to u32 so it becomes a high positive and
then cast to long where it's still a positive.
We could fix this by declaring "ret" as a ssize_t but let's just get rid
of the ternaries instead.
Link: https://lkml.kernel.org/r/YIE+/cK1tBzSuQPU@mwanda
Fixes: 5bf2b19320ec ("kfifo: add example files to the kernel sample directory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
samples/kfifo/bytestream-example.c | 8 ++++++--
samples/kfifo/inttype-example.c | 8 ++++++--
samples/kfifo/record-example.c | 8 ++++++--
3 files changed, 18 insertions(+), 6 deletions(-)
diff --git a/samples/kfifo/bytestream-example.c b/samples/kfifo/bytestream-example.c
index c406f03ee551..5a90aa527877 100644
--- a/samples/kfifo/bytestream-example.c
+++ b/samples/kfifo/bytestream-example.c
@@ -122,8 +122,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -138,8 +140,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct proc_ops fifo_proc_ops = {
diff --git a/samples/kfifo/inttype-example.c b/samples/kfifo/inttype-example.c
index 78977fc4a23f..e5403d8c971a 100644
--- a/samples/kfifo/inttype-example.c
+++ b/samples/kfifo/inttype-example.c
@@ -115,8 +115,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -131,8 +133,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct proc_ops fifo_proc_ops = {
diff --git a/samples/kfifo/record-example.c b/samples/kfifo/record-example.c
index c507998a2617..f64f3d62d6c2 100644
--- a/samples/kfifo/record-example.c
+++ b/samples/kfifo/record-example.c
@@ -129,8 +129,10 @@ static ssize_t fifo_write(struct file *file, const char __user *buf,
ret = kfifo_from_user(&test, buf, count, &copied);
mutex_unlock(&write_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static ssize_t fifo_read(struct file *file, char __user *buf,
@@ -145,8 +147,10 @@ static ssize_t fifo_read(struct file *file, char __user *buf,
ret = kfifo_to_user(&test, buf, count, &copied);
mutex_unlock(&read_lock);
+ if (ret)
+ return ret;
- return ret ? ret : copied;
+ return copied;
}
static const struct proc_ops fifo_proc_ops = {
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 666/677] mm, slub: enable slub_debug static key when creating cache with explicit debug flags
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (664 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 665/677] kfifo: fix ternary sign extension bugs Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 667/677] mm: memcontrol: slab: fix obtain a reference to a freeing memcg Greg Kroah-Hartman
` (17 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vlastimil Babka, Oliver Glitta,
David Rientjes, Christoph Lameter, Pekka Enberg, Joonsoo Kim,
Paul E. McKenney, Andrew Morton, Linus Torvalds, Sasha Levin
From: Vlastimil Babka <vbabka@suse.cz>
[ Upstream commit 1f0723a4c0df36cbdffc6fac82cd3c5d57e06d66 ]
Commit ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()")
introduced a static key to optimize the case where no debugging is
enabled for any cache. The static key is enabled when slub_debug boot
parameter is passed, or CONFIG_SLUB_DEBUG_ON enabled.
However, some caches might be created with one or more debugging flags
explicitly passed to kmem_cache_create(), and the commit missed this.
Thus the debugging functionality would not be actually performed for
these caches unless the static key gets enabled by boot param or config.
This patch fixes it by checking for debugging flags passed to
kmem_cache_create() and enabling the static key accordingly.
Note such explicit debugging flags should not be used outside of
debugging and testing as they will now enable the static key globally.
btrfs_init_cachep() creates a cache with SLAB_RED_ZONE but that's a
mistake that's being corrected [1]. rcu_torture_stats() creates a cache
with SLAB_STORE_USER, but that is a testing module so it's OK and will
start working as intended after this patch.
Also note that in case of backports to kernels before v5.12 that don't
have 59450bbc12be ("mm, slab, slub: stop taking cpu hotplug lock"),
static_branch_enable_cpuslocked() should be used.
[1] https://lore.kernel.org/linux-btrfs/20210315141824.26099-1-dsterba@suse.com/
Link: https://lkml.kernel.org/r/20210315153415.24404-1-vbabka@suse.cz
Fixes: ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Oliver Glitta <glittao@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/slub.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/mm/slub.c b/mm/slub.c
index 3021ce9bf1b3..0fa68cfa648b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3827,6 +3827,15 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
static int kmem_cache_open(struct kmem_cache *s, slab_flags_t flags)
{
+#ifdef CONFIG_SLUB_DEBUG
+ /*
+ * If no slub_debug was enabled globally, the static key is not yet
+ * enabled by setup_slub_debug(). Enable it if the cache is being
+ * created with any of the debugging flags passed explicitly.
+ */
+ if (flags & SLAB_DEBUG_FLAGS)
+ static_branch_enable(&slub_debug_enabled);
+#endif
s->flags = kmem_cache_flags(s->size, flags, s->name);
#ifdef CONFIG_SLAB_FREELIST_HARDENED
s->random = get_random_long();
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 667/677] mm: memcontrol: slab: fix obtain a reference to a freeing memcg
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (665 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 666/677] mm, slub: enable slub_debug static key when creating cache with explicit debug flags Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 668/677] mm/sparse: add the missing sparse_buffer_fini() in error branch Greg Kroah-Hartman
` (16 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Muchun Song, Shakeel Butt,
Roman Gushchin, Johannes Weiner, Michal Hocko, Vladimir Davydov,
Xiongchun Duan, Andrew Morton, Linus Torvalds, Sasha Levin
From: Muchun Song <songmuchun@bytedance.com>
[ Upstream commit 9f38f03ae8d5f57371b71aa6b4275765b65454fd ]
Patch series "Use obj_cgroup APIs to charge kmem pages", v5.
Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged with the new APIs of obj_cgroup. The new
APIs introduce a struct obj_cgroup to charge slab objects. It prevents
long-living objects from pinning the original memory cgroup in the
memory. But there are still some corner objects (e.g. allocations
larger than order-1 page on SLUB) which are not charged with the new
APIs. Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.
E.g. We know that the kernel stack is charged as kmem pages because the
size of the kernel stack can be greater than 2 pages (e.g. 16KB on
x86_64 or arm64). If we create a thread (suppose the thread stack is
charged to memory cgroup A) and then move it from memory cgroup A to
memory cgroup B. Because the kernel stack of the thread hold a
reference to the memory cgroup A. The thread can pin the memory cgroup
A in the memory even if we remove the cgroup A. If we want to see this
scenario by using the following script. We can see that the system has
added 500 dying cgroups (This is not a real world issue, just a script
to show that the large kmallocs are charged as kmem pages which can pin
the memory cgroup in the memory).
#!/bin/bash
cat /proc/cgroups | grep memory
cd /sys/fs/cgroup/memory
echo 1 > memory.move_charge_at_immigrate
for i in range{1..500}
do
mkdir kmem_test
echo $$ > kmem_test/cgroup.procs
sleep 3600 &
echo $$ > cgroup.procs
echo `cat kmem_test/cgroup.procs` > cgroup.procs
rmdir kmem_test
done
cat /proc/cgroups | grep memory
This patchset aims to make those kmem pages to drop the reference to
memory cgroup by using the APIs of obj_cgroup. Finally, we can see that
the number of the dying cgroups will not increase if we run the above test
script.
This patch (of 7):
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get (which is in the
refill_stock when cached memcg changed) to memcg.
rcu_read_lock()
memcg = obj_cgroup_memcg(old)
__memcg_kmem_uncharge(memcg)
refill_stock(memcg)
if (stock->cached != memcg)
// css_get can change the ref counter from 0 back to 1.
css_get(&memcg->css)
rcu_read_unlock()
This fix is very like the commit:
eefbfa7fd678 ("mm: memcg/slab: fix use after free in obj_cgroup_charge")
Fix this by holding a reference to the memcg which is passed to the
__memcg_kmem_uncharge() before calling __memcg_kmem_uncharge().
Link: https://lkml.kernel.org/r/20210319163821.20704-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210319163821.20704-2-songmuchun@bytedance.com
Fixes: 3de7d4f25a74 ("mm: memcg/slab: optimize objcg stock draining")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/memcontrol.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e064ac0d850a..e876ba693998 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3181,9 +3181,17 @@ static void drain_obj_stock(struct memcg_stock_pcp *stock)
unsigned int nr_bytes = stock->nr_bytes & (PAGE_SIZE - 1);
if (nr_pages) {
+ struct mem_cgroup *memcg;
+
rcu_read_lock();
- __memcg_kmem_uncharge(obj_cgroup_memcg(old), nr_pages);
+retry:
+ memcg = obj_cgroup_memcg(old);
+ if (unlikely(!css_tryget(&memcg->css)))
+ goto retry;
rcu_read_unlock();
+
+ __memcg_kmem_uncharge(memcg, nr_pages);
+ css_put(&memcg->css);
}
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 668/677] mm/sparse: add the missing sparse_buffer_fini() in error branch
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (666 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 667/677] mm: memcontrol: slab: fix obtain a reference to a freeing memcg Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 669/677] mm/memory-failure: unnecessary amount of unmapping Greg Kroah-Hartman
` (15 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wang Wensheng, David Hildenbrand,
Oscar Salvador, Pavel Tatashin, Andrew Morton, Linus Torvalds,
Sasha Levin
From: Wang Wensheng <wangwensheng4@huawei.com>
[ Upstream commit 2284f47fe9fe2ed2ef619e5474e155cfeeebd569 ]
sparse_buffer_init() and sparse_buffer_fini() should appear in pair, or a
WARN issue would be through the next time sparse_buffer_init() runs.
Add the missing sparse_buffer_fini() in error branch.
Link: https://lkml.kernel.org/r/20210325113155.118574-1-wangwensheng4@huawei.com
Fixes: 85c77f791390 ("mm/sparse: add new sparse_init_nid() and sparse_init()")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/sparse.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/sparse.c b/mm/sparse.c
index 7bd23f9d6cef..33406ea2ecc4 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -547,6 +547,7 @@ static void __init sparse_init_nid(int nid, unsigned long pnum_begin,
pr_err("%s: node[%d] memory map backing failed. Some memory will not be available.",
__func__, nid);
pnum_begin = pnum;
+ sparse_buffer_fini();
goto failed;
}
check_usemap_section_nr(nid, usage);
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 669/677] mm/memory-failure: unnecessary amount of unmapping
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (667 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 668/677] mm/sparse: add the missing sparse_buffer_fini() in error branch Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 670/677] afs: Fix speculative status fetches Greg Kroah-Hartman
` (14 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jane Chu, Dan Williams,
Naoya Horiguchi, Dave Jiang, Andrew Morton, Linus Torvalds,
Sasha Levin
From: Jane Chu <jane.chu@oracle.com>
[ Upstream commit 4d75136be8bf3ae01b0bc3e725b2cdc921e103bd ]
It appears that unmap_mapping_range() actually takes a 'size' as its third
argument rather than a location, the current calling fashion causes
unnecessary amount of unmapping to occur.
Link: https://lkml.kernel.org/r/20210420002821.2749748-1-jane.chu@oracle.com
Fixes: 6100e34b2526e ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/memory-failure.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 24210c9bd843..bd3945446d47 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1368,7 +1368,7 @@ static int memory_failure_dev_pagemap(unsigned long pfn, int flags,
* communicated in siginfo, see kill_proc()
*/
start = (page->index << PAGE_SHIFT) & ~(size - 1);
- unmap_mapping_range(page->mapping, start, start + size, 0);
+ unmap_mapping_range(page->mapping, start, size, 0);
}
kill_procs(&tokill, flags & MF_MUST_KILL, !unmap_success, pfn, flags);
rc = 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 670/677] afs: Fix speculative status fetches
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (668 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 669/677] mm/memory-failure: unnecessary amount of unmapping Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 671/677] bpf: Fix alu32 const subreg bound tracking on bitwise operations Greg Kroah-Hartman
` (13 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marc Dionne, David Howells,
linux-afs, Linus Torvalds, Sasha Levin
From: David Howells <dhowells@redhat.com>
[ Upstream commit 22650f148126571be1098d34160eb4931fc77241 ]
The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:
kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)
This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).
What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in. This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).
On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).
On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.
This means that:
- a status fetch can access the target vnode either side of the exclusive
section of the modification
- the status fetch could start before the modification, yet finish after,
and vice-versa.
- the status fetch and the modification RPCs can complete in either order.
- the status fetch can return either the before or the after DV from the
modification.
- the status fetch might regress the locally cached DV.
Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.
Fix this by the following means:
(1) Keep track of when we're performing a modification operation on a
vnode. This is done by marking vnode parameters with a 'modification'
note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
for the duration.
(2) Alter the speculation race detection to ignore speculative status
fetches if either the vnode is marked as being modified or the data
version number is not what we expected.
Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.
Fixes: a9e5c87ca744 ("afs: Fix speculative status fetch going out of order wrt to modifications")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-and-reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/160605082531.252452.14708077925602709042.stgit@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/linux-fsdevel/161961335926.39335.2552653972195467566.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/afs/dir.c | 7 +++++++
fs/afs/dir_silly.c | 3 +++
fs/afs/fs_operation.c | 6 ++++++
fs/afs/inode.c | 6 ++++--
fs/afs/internal.h | 2 ++
fs/afs/write.c | 1 +
6 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 17548c1faf02..31251d11d576 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1342,6 +1342,7 @@ static int afs_mkdir(struct user_namespace *mnt_userns, struct inode *dir,
afs_op_set_vnode(op, 0, dvnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
op->dentry = dentry;
op->create.mode = S_IFDIR | mode;
@@ -1423,6 +1424,7 @@ static int afs_rmdir(struct inode *dir, struct dentry *dentry)
afs_op_set_vnode(op, 0, dvnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
op->dentry = dentry;
@@ -1559,6 +1561,7 @@ static int afs_unlink(struct inode *dir, struct dentry *dentry)
afs_op_set_vnode(op, 0, dvnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
/* Try to make sure we have a callback promise on the victim. */
@@ -1641,6 +1644,7 @@ static int afs_create(struct user_namespace *mnt_userns, struct inode *dir,
afs_op_set_vnode(op, 0, dvnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
op->dentry = dentry;
@@ -1715,6 +1719,7 @@ static int afs_link(struct dentry *from, struct inode *dir,
afs_op_set_vnode(op, 0, dvnode);
afs_op_set_vnode(op, 1, vnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
op->file[1].update_ctime = true;
@@ -1910,6 +1915,8 @@ static int afs_rename(struct user_namespace *mnt_userns, struct inode *old_dir,
afs_op_set_vnode(op, 1, new_dvnode); /* May be same as orig_dvnode */
op->file[0].dv_delta = 1;
op->file[1].dv_delta = 1;
+ op->file[0].modification = true;
+ op->file[1].modification = true;
op->file[0].update_ctime = true;
op->file[1].update_ctime = true;
diff --git a/fs/afs/dir_silly.c b/fs/afs/dir_silly.c
index 04f75a44f243..dae9a57d7ec0 100644
--- a/fs/afs/dir_silly.c
+++ b/fs/afs/dir_silly.c
@@ -73,6 +73,8 @@ static int afs_do_silly_rename(struct afs_vnode *dvnode, struct afs_vnode *vnode
afs_op_set_vnode(op, 1, dvnode);
op->file[0].dv_delta = 1;
op->file[1].dv_delta = 1;
+ op->file[0].modification = true;
+ op->file[1].modification = true;
op->file[0].update_ctime = true;
op->file[1].update_ctime = true;
@@ -201,6 +203,7 @@ static int afs_do_silly_unlink(struct afs_vnode *dvnode, struct afs_vnode *vnode
afs_op_set_vnode(op, 0, dvnode);
afs_op_set_vnode(op, 1, vnode);
op->file[0].dv_delta = 1;
+ op->file[0].modification = true;
op->file[0].update_ctime = true;
op->file[1].op_unlinked = true;
op->file[1].update_ctime = true;
diff --git a/fs/afs/fs_operation.c b/fs/afs/fs_operation.c
index 71c58723763d..a82515b47350 100644
--- a/fs/afs/fs_operation.c
+++ b/fs/afs/fs_operation.c
@@ -118,6 +118,8 @@ static void afs_prepare_vnode(struct afs_operation *op, struct afs_vnode_param *
vp->cb_break_before = afs_calc_vnode_cb_break(vnode);
if (vnode->lock_state != AFS_VNODE_LOCK_NONE)
op->flags |= AFS_OPERATION_CUR_ONLY;
+ if (vp->modification)
+ set_bit(AFS_VNODE_MODIFYING, &vnode->flags);
}
if (vp->fid.vnode)
@@ -223,6 +225,10 @@ int afs_put_operation(struct afs_operation *op)
if (op->ops && op->ops->put)
op->ops->put(op);
+ if (op->file[0].modification)
+ clear_bit(AFS_VNODE_MODIFYING, &op->file[0].vnode->flags);
+ if (op->file[1].modification && op->file[1].vnode != op->file[0].vnode)
+ clear_bit(AFS_VNODE_MODIFYING, &op->file[1].vnode->flags);
if (op->file[0].put_vnode)
iput(&op->file[0].vnode->vfs_inode);
if (op->file[1].put_vnode)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 5a70c09f5325..fddf7d54e0b7 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -293,8 +293,9 @@ void afs_vnode_commit_status(struct afs_operation *op, struct afs_vnode_param *v
op->flags &= ~AFS_OPERATION_DIR_CONFLICT;
}
} else if (vp->scb.have_status) {
- if (vp->dv_before + vp->dv_delta != vp->scb.status.data_version &&
- vp->speculative)
+ if (vp->speculative &&
+ (test_bit(AFS_VNODE_MODIFYING, &vnode->flags) ||
+ vp->dv_before != vnode->status.data_version))
/* Ignore the result of a speculative bulk status fetch
* if it splits around a modification op, thereby
* appearing to regress the data version.
@@ -910,6 +911,7 @@ int afs_setattr(struct user_namespace *mnt_userns, struct dentry *dentry,
}
op->ctime = attr->ia_ctime;
op->file[0].update_ctime = 1;
+ op->file[0].modification = true;
op->ops = &afs_setattr_operation;
ret = afs_do_sync_operation(op);
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 1627b1872812..be981a9a1add 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -640,6 +640,7 @@ struct afs_vnode {
#define AFS_VNODE_PSEUDODIR 7 /* set if Vnode is a pseudo directory */
#define AFS_VNODE_NEW_CONTENT 8 /* Set if file has new content (create/trunc-0) */
#define AFS_VNODE_SILLY_DELETED 9 /* Set if file has been silly-deleted */
+#define AFS_VNODE_MODIFYING 10 /* Set if we're performing a modification op */
struct list_head wb_keys; /* List of keys available for writeback */
struct list_head pending_locks; /* locks waiting to be granted */
@@ -756,6 +757,7 @@ struct afs_vnode_param {
bool set_size:1; /* Must update i_size */
bool op_unlinked:1; /* True if file was unlinked by op */
bool speculative:1; /* T if speculative status fetch (no vnode lock) */
+ bool modification:1; /* Set if the content gets modified */
};
/*
diff --git a/fs/afs/write.c b/fs/afs/write.c
index eb737ed63afb..ebe3b6493fce 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -450,6 +450,7 @@ static int afs_store_data(struct address_space *mapping,
afs_op_set_vnode(op, 0, vnode);
op->file[0].dv_delta = 1;
op->store.mapping = mapping;
+ op->file[0].modification = true;
op->store.first = first;
op->store.last = last;
op->store.first_offset = offset;
--
2.30.2
^ permalink raw reply related [flat|nested] 694+ messages in thread
* [PATCH 5.12 671/677] bpf: Fix alu32 const subreg bound tracking on bitwise operations
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (669 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 670/677] afs: Fix speculative status fetches Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 672/677] bpf, ringbuf: Deny reserve of buffers larger than ringbuf Greg Kroah-Hartman
` (12 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Daniel Borkmann, John Fastabend, Alexei Starovoitov
From: Daniel Borkmann <daniel@iogearbox.net>
commit 049c4e13714ecbca567b4d5f6d563f05d431c80e upstream.
Fix a bug in the verifier's scalar32_min_max_*() functions which leads to
incorrect tracking of 32 bit bounds for the simulation of and/or/xor bitops.
When both the src & dst subreg is a known constant, then the assumption is
that scalar_min_max_*() will take care to update bounds correctly. However,
this is not the case, for example, consider a register R2 which has a tnum
of 0xffffffff00000000, meaning, lower 32 bits are known constant and in this
case of value 0x00000001. R2 is then and'ed with a register R3 which is a
64 bit known constant, here, 0x100000002.
What can be seen in line '10:' is that 32 bit bounds reach an invalid state
where {u,s}32_min_value > {u,s}32_max_value. The reason is scalar32_min_max_*()
delegates 32 bit bounds updates to scalar_min_max_*(), however, that really
only takes place when both the 64 bit src & dst register is a known constant.
Given scalar32_min_max_*() is intended to be designed as closely as possible
to scalar_min_max_*(), update the 32 bit bounds in this situation through
__mark_reg32_known() which will set all {u,s}32_{min,max}_value to the correct
constant, which is 0x00000000 after the fix (given 0x00000001 & 0x00000002 in
32 bit space). This is possible given var32_off already holds the final value
as dst_reg->var_off is updated before calling scalar32_min_max_*().
Before fix, invalid tracking of R2:
[...]
9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
9: (5f) r2 &= r3
10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=1,s32_max_value=0,u32_min_value=1,u32_max_value=0) R3_w=inv4294967298 R10=fp0
[...]
After fix, correct tracking of R2:
[...]
9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
9: (5f) r2 &= r3
10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=0,s32_max_value=0,u32_min_value=0,u32_max_value=0) R3_w=inv4294967298 R10=fp0
[...]
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 2921c90d4718 ("bpf: Fix a verifier failure with xor")
Reported-by: Manfred Paul (@_manfp)
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6538,11 +6538,10 @@ static void scalar32_min_max_and(struct
s32 smin_val = src_reg->s32_min_value;
u32 umax_val = src_reg->u32_max_value;
- /* Assuming scalar64_min_max_and will be called so its safe
- * to skip updating register for known 32-bit case.
- */
- if (src_known && dst_known)
+ if (src_known && dst_known) {
+ __mark_reg32_known(dst_reg, var32_off.value);
return;
+ }
/* We get our minimum from the var_off, since that's inherently
* bitwise. Our maximum is the minimum of the operands' maxima.
@@ -6562,7 +6561,6 @@ static void scalar32_min_max_and(struct
dst_reg->s32_min_value = dst_reg->u32_min_value;
dst_reg->s32_max_value = dst_reg->u32_max_value;
}
-
}
static void scalar_min_max_and(struct bpf_reg_state *dst_reg,
@@ -6609,11 +6607,10 @@ static void scalar32_min_max_or(struct b
s32 smin_val = src_reg->s32_min_value;
u32 umin_val = src_reg->u32_min_value;
- /* Assuming scalar64_min_max_or will be called so it is safe
- * to skip updating register for known case.
- */
- if (src_known && dst_known)
+ if (src_known && dst_known) {
+ __mark_reg32_known(dst_reg, var32_off.value);
return;
+ }
/* We get our maximum from the var_off, and our minimum is the
* maximum of the operands' minima
@@ -6678,11 +6675,10 @@ static void scalar32_min_max_xor(struct
struct tnum var32_off = tnum_subreg(dst_reg->var_off);
s32 smin_val = src_reg->s32_min_value;
- /* Assuming scalar64_min_max_xor will be called so it is safe
- * to skip updating register for known case.
- */
- if (src_known && dst_known)
+ if (src_known && dst_known) {
+ __mark_reg32_known(dst_reg, var32_off.value);
return;
+ }
/* We get both minimum and maximum from the var32_off. */
dst_reg->u32_min_value = var32_off.value;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 672/677] bpf, ringbuf: Deny reserve of buffers larger than ringbuf
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (670 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 671/677] bpf: Fix alu32 const subreg bound tracking on bitwise operations Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 673/677] bpf: Prevent writable memory-mapping of read-only ringbuf pages Greg Kroah-Hartman
` (11 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Daniel Borkmann, Andrii Nakryiko, Alexei Starovoitov
From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
commit 4b81ccebaeee885ab1aa1438133f2991e3a2b6ea upstream.
A BPF program might try to reserve a buffer larger than the ringbuf size.
If the consumer pointer is way ahead of the producer, that would be
successfully reserved, allowing the BPF program to read or write out of
the ringbuf allocated area.
Reported-by: Ryota Shiga (Flatt Security)
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/ringbuf.c | 3 +++
1 file changed, 3 insertions(+)
--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -315,6 +315,9 @@ static void *__bpf_ringbuf_reserve(struc
return NULL;
len = round_up(size + BPF_RINGBUF_HDR_SZ, 8);
+ if (len > rb->mask + 1)
+ return NULL;
+
cons_pos = smp_load_acquire(&rb->consumer_pos);
if (in_nmi()) {
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 673/677] bpf: Prevent writable memory-mapping of read-only ringbuf pages
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (671 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 672/677] bpf, ringbuf: Deny reserve of buffers larger than ringbuf Greg Kroah-Hartman
@ 2021-05-12 14:51 ` Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 674/677] net: Only allow init netns to set default tcp cong to a restricted algo Greg Kroah-Hartman
` (10 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:51 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Andrii Nakryiko, Daniel Borkmann, Alexei Starovoitov
From: Andrii Nakryiko <andrii@kernel.org>
commit 04ea3086c4d73da7009de1e84962a904139af219 upstream.
Only the very first page of BPF ringbuf that contains consumer position
counter is supposed to be mapped as writeable by user-space. Producer
position is read-only and can be modified only by the kernel code. BPF ringbuf
data pages are read-only as well and are not meant to be modified by
user-code to maintain integrity of per-record headers.
This patch allows to map only consumer position page as writeable and
everything else is restricted to be read-only. remap_vmalloc_range()
internally adds VM_DONTEXPAND, so all the established memory mappings can't be
extended, which prevents any future violations through mremap()'ing.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Ryota Shiga (Flatt Security)
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/ringbuf.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -221,25 +221,20 @@ static int ringbuf_map_get_next_key(stru
return -ENOTSUPP;
}
-static size_t bpf_ringbuf_mmap_page_cnt(const struct bpf_ringbuf *rb)
-{
- size_t data_pages = (rb->mask + 1) >> PAGE_SHIFT;
-
- /* consumer page + producer page + 2 x data pages */
- return RINGBUF_POS_PAGES + 2 * data_pages;
-}
-
static int ringbuf_map_mmap(struct bpf_map *map, struct vm_area_struct *vma)
{
struct bpf_ringbuf_map *rb_map;
- size_t mmap_sz;
rb_map = container_of(map, struct bpf_ringbuf_map, map);
- mmap_sz = bpf_ringbuf_mmap_page_cnt(rb_map->rb) << PAGE_SHIFT;
-
- if (vma->vm_pgoff * PAGE_SIZE + (vma->vm_end - vma->vm_start) > mmap_sz)
- return -EINVAL;
+ if (vma->vm_flags & VM_WRITE) {
+ /* allow writable mapping for the consumer_pos only */
+ if (vma->vm_pgoff != 0 || vma->vm_end - vma->vm_start != PAGE_SIZE)
+ return -EPERM;
+ } else {
+ vma->vm_flags &= ~VM_MAYWRITE;
+ }
+ /* remap_vmalloc_range() checks size and offset constraints */
return remap_vmalloc_range(vma, rb_map->rb,
vma->vm_pgoff + RINGBUF_PGOFF);
}
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 674/677] net: Only allow init netns to set default tcp cong to a restricted algo
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (672 preceding siblings ...)
2021-05-12 14:51 ` [PATCH 5.12 673/677] bpf: Prevent writable memory-mapping of read-only ringbuf pages Greg Kroah-Hartman
@ 2021-05-12 14:52 ` Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 675/677] smp: Fix smp_call_function_single_async prototype Greg Kroah-Hartman
` (9 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:52 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathon Reinhart, David S. Miller
From: Jonathon Reinhart <jonathon.reinhart@gmail.com>
commit 8d432592f30fcc34ef5a10aac4887b4897884493 upstream.
tcp_set_default_congestion_control() is netns-safe in that it writes
to &net->ipv4.tcp_congestion_control, but it also sets
ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced.
This has the unintended side-effect of changing the global
net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it
is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control
readonly in non-init netns")
Resolve this netns "leak" by only allowing the init netns to set the
default algorithm to one that is restricted. This restriction could be
removed if tcp_allowed_congestion_control were namespace-ified in the
future.
This bug was uncovered with
https://github.com/JonathonReinhart/linux-netns-sysctl-verify
Fixes: 6670e1524477 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_cong.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -230,6 +230,10 @@ int tcp_set_default_congestion_control(s
ret = -ENOENT;
} else if (!bpf_try_module_get(ca, ca->owner)) {
ret = -EBUSY;
+ } else if (!net_eq(net, &init_net) &&
+ !(ca->flags & TCP_CONG_NON_RESTRICTED)) {
+ /* Only init netns can set default to a restricted algorithm */
+ ret = -EPERM;
} else {
prev = xchg(&net->ipv4.tcp_congestion_control, ca);
if (prev)
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 675/677] smp: Fix smp_call_function_single_async prototype
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (673 preceding siblings ...)
2021-05-12 14:52 ` [PATCH 5.12 674/677] net: Only allow init netns to set default tcp cong to a restricted algo Greg Kroah-Hartman
@ 2021-05-12 14:52 ` Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 676/677] Revert "net/sctp: fix race condition in sctp_destroy_sock" Greg Kroah-Hartman
` (8 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:52 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Peter Zijlstra (Intel),
Jens Axboe, Nathan Chancellor
From: Arnd Bergmann <arnd@arndb.de>
commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream.
As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe032005 ("block: unalign
call_single_data in struct request").
The result is a violation of the calling conventions that clang correctly
points out:
block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
smp_call_function_single_async(cpu, &rq->csd);
It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org
[nc: Fix conflicts]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/smp.h | 2 +-
kernel/smp.c | 20 ++++++++++----------
kernel/up.c | 2 +-
3 files changed, 12 insertions(+), 12 deletions(-)
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -73,7 +73,7 @@ void on_each_cpu_cond(smp_cond_func_t co
void on_each_cpu_cond_mask(smp_cond_func_t cond_func, smp_call_func_t func,
void *info, bool wait, const struct cpumask *mask);
-int smp_call_function_single_async(int cpu, call_single_data_t *csd);
+int smp_call_function_single_async(int cpu, struct __call_single_data *csd);
#ifdef CONFIG_SMP
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -110,7 +110,7 @@ static DEFINE_PER_CPU(void *, cur_csd_in
static atomic_t csd_bug_count = ATOMIC_INIT(0);
/* Record current CSD work for current CPU, NULL to erase. */
-static void csd_lock_record(call_single_data_t *csd)
+static void csd_lock_record(struct __call_single_data *csd)
{
if (!csd) {
smp_mb(); /* NULL cur_csd after unlock. */
@@ -125,7 +125,7 @@ static void csd_lock_record(call_single_
/* Or before unlock, as the case may be. */
}
-static __always_inline int csd_lock_wait_getcpu(call_single_data_t *csd)
+static __always_inline int csd_lock_wait_getcpu(struct __call_single_data *csd)
{
unsigned int csd_type;
@@ -140,7 +140,7 @@ static __always_inline int csd_lock_wait
* the CSD_TYPE_SYNC/ASYNC types provide the destination CPU,
* so waiting on other types gets much less information.
*/
-static __always_inline bool csd_lock_wait_toolong(call_single_data_t *csd, u64 ts0, u64 *ts1, int *bug_id)
+static __always_inline bool csd_lock_wait_toolong(struct __call_single_data *csd, u64 ts0, u64 *ts1, int *bug_id)
{
int cpu = -1;
int cpux;
@@ -204,7 +204,7 @@ static __always_inline bool csd_lock_wai
* previous function call. For multi-cpu calls its even more interesting
* as we'll have to ensure no other cpu is observing our csd.
*/
-static __always_inline void csd_lock_wait(call_single_data_t *csd)
+static __always_inline void csd_lock_wait(struct __call_single_data *csd)
{
int bug_id = 0;
u64 ts0, ts1;
@@ -219,17 +219,17 @@ static __always_inline void csd_lock_wai
}
#else
-static void csd_lock_record(call_single_data_t *csd)
+static void csd_lock_record(struct __call_single_data *csd)
{
}
-static __always_inline void csd_lock_wait(call_single_data_t *csd)
+static __always_inline void csd_lock_wait(struct __call_single_data *csd)
{
smp_cond_load_acquire(&csd->node.u_flags, !(VAL & CSD_FLAG_LOCK));
}
#endif
-static __always_inline void csd_lock(call_single_data_t *csd)
+static __always_inline void csd_lock(struct __call_single_data *csd)
{
csd_lock_wait(csd);
csd->node.u_flags |= CSD_FLAG_LOCK;
@@ -242,7 +242,7 @@ static __always_inline void csd_lock(cal
smp_wmb();
}
-static __always_inline void csd_unlock(call_single_data_t *csd)
+static __always_inline void csd_unlock(struct __call_single_data *csd)
{
WARN_ON(!(csd->node.u_flags & CSD_FLAG_LOCK));
@@ -276,7 +276,7 @@ void __smp_call_single_queue(int cpu, st
* for execution on the given CPU. data must already have
* ->func, ->info, and ->flags set.
*/
-static int generic_exec_single(int cpu, call_single_data_t *csd)
+static int generic_exec_single(int cpu, struct __call_single_data *csd)
{
if (cpu == smp_processor_id()) {
smp_call_func_t func = csd->func;
@@ -542,7 +542,7 @@ EXPORT_SYMBOL(smp_call_function_single);
* NOTE: Be careful, there is unfortunately no current debugging facility to
* validate the correctness of this serialization.
*/
-int smp_call_function_single_async(int cpu, call_single_data_t *csd)
+int smp_call_function_single_async(int cpu, struct __call_single_data *csd)
{
int err = 0;
--- a/kernel/up.c
+++ b/kernel/up.c
@@ -25,7 +25,7 @@ int smp_call_function_single(int cpu, vo
}
EXPORT_SYMBOL(smp_call_function_single);
-int smp_call_function_single_async(int cpu, call_single_data_t *csd)
+int smp_call_function_single_async(int cpu, struct __call_single_data *csd)
{
unsigned long flags;
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 676/677] Revert "net/sctp: fix race condition in sctp_destroy_sock"
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (674 preceding siblings ...)
2021-05-12 14:52 ` [PATCH 5.12 675/677] smp: Fix smp_call_function_single_async prototype Greg Kroah-Hartman
@ 2021-05-12 14:52 ` Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 677/677] sctp: delay auto_asconf init until binding the first addr Greg Kroah-Hartman
` (7 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:52 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+959223586843e69a2674,
Xin Long, David S. Miller
From: Xin Long <lucien.xin@gmail.com>
commit 01bfe5e8e428b475982a98a46cca5755726f3f7f upstream.
This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b.
This one has to be reverted as it introduced a dead lock, as
syzbot reported:
CPU0 CPU1
---- ----
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1
is that of sctp_close().
The original issue this commit fixed will be fixed in the next
patch.
Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sctp/socket.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1520,9 +1520,11 @@ static void sctp_close(struct sock *sk,
/* Supposedly, no process has access to the socket, but
* the net layers still may.
+ * Also, sctp_destroy_sock() needs to be called with addr_wq_lock
+ * held and that should be grabbed before socket lock.
*/
- local_bh_disable();
- bh_lock_sock(sk);
+ spin_lock_bh(&net->sctp.addr_wq_lock);
+ bh_lock_sock_nested(sk);
/* Hold the sock, since sk_common_release() will put sock_put()
* and we have just a little more cleanup.
@@ -1531,7 +1533,7 @@ static void sctp_close(struct sock *sk,
sk_common_release(sk);
bh_unlock_sock(sk);
- local_bh_enable();
+ spin_unlock_bh(&net->sctp.addr_wq_lock);
sock_put(sk);
@@ -4991,6 +4993,9 @@ static int sctp_init_sock(struct sock *s
sk_sockets_allocated_inc(sk);
sock_prot_inuse_add(net, sk->sk_prot, 1);
+ /* Nothing can fail after this block, otherwise
+ * sctp_destroy_sock() will be called without addr_wq_lock held
+ */
if (net->sctp.default_auto_asconf) {
spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
list_add_tail(&sp->auto_asconf_list,
@@ -5025,9 +5030,7 @@ static void sctp_destroy_sock(struct soc
if (sp->do_auto_asconf) {
sp->do_auto_asconf = 0;
- spin_lock_bh(&sock_net(sk)->sctp.addr_wq_lock);
list_del(&sp->auto_asconf_list);
- spin_unlock_bh(&sock_net(sk)->sctp.addr_wq_lock);
}
sctp_endpoint_free(sp->ep);
local_bh_disable();
^ permalink raw reply [flat|nested] 694+ messages in thread
* [PATCH 5.12 677/677] sctp: delay auto_asconf init until binding the first addr
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (675 preceding siblings ...)
2021-05-12 14:52 ` [PATCH 5.12 676/677] Revert "net/sctp: fix race condition in sctp_destroy_sock" Greg Kroah-Hartman
@ 2021-05-12 14:52 ` Greg Kroah-Hartman
2021-05-12 17:23 ` [PATCH 5.12 000/677] 5.12.4-rc1 review Naresh Kamboju
` (6 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 14:52 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Or Cohen, Xin Long, David S. Miller
From: Xin Long <lucien.xin@gmail.com>
commit 34e5b01186858b36c4d7c87e1a025071e8e2401f upstream.
As Or Cohen described:
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.
This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
attached to BPF_CGROUP_INET_SOCK_CREATE which denies
creation of the sctp socket.
This patch is to fix it by moving the auto_asconf init out of
sctp_init_sock(), by which inet_create()/inet6_create() won't
need to operate it in sctp_destroy_sock() when calling
sk_common_release().
It also makes more sense to do auto_asconf init while binding the
first addr, as auto_asconf actually requires an ANY addr bind,
see it in sctp_addr_wq_timeout_handler().
This addresses CVE-2021-23133.
Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications")
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sctp/socket.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -357,6 +357,18 @@ static struct sctp_af *sctp_sockaddr_af(
return af;
}
+static void sctp_auto_asconf_init(struct sctp_sock *sp)
+{
+ struct net *net = sock_net(&sp->inet.sk);
+
+ if (net->sctp.default_auto_asconf) {
+ spin_lock(&net->sctp.addr_wq_lock);
+ list_add_tail(&sp->auto_asconf_list, &net->sctp.auto_asconf_splist);
+ spin_unlock(&net->sctp.addr_wq_lock);
+ sp->do_auto_asconf = 1;
+ }
+}
+
/* Bind a local address either to an endpoint or to an association. */
static int sctp_do_bind(struct sock *sk, union sctp_addr *addr, int len)
{
@@ -418,8 +430,10 @@ static int sctp_do_bind(struct sock *sk,
return -EADDRINUSE;
/* Refresh ephemeral port. */
- if (!bp->port)
+ if (!bp->port) {
bp->port = inet_sk(sk)->inet_num;
+ sctp_auto_asconf_init(sp);
+ }
/* Add the address to the bind address list.
* Use GFP_ATOMIC since BHs will be disabled.
@@ -4993,19 +5007,6 @@ static int sctp_init_sock(struct sock *s
sk_sockets_allocated_inc(sk);
sock_prot_inuse_add(net, sk->sk_prot, 1);
- /* Nothing can fail after this block, otherwise
- * sctp_destroy_sock() will be called without addr_wq_lock held
- */
- if (net->sctp.default_auto_asconf) {
- spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
- list_add_tail(&sp->auto_asconf_list,
- &net->sctp.auto_asconf_splist);
- sp->do_auto_asconf = 1;
- spin_unlock(&sock_net(sk)->sctp.addr_wq_lock);
- } else {
- sp->do_auto_asconf = 0;
- }
-
local_bh_enable();
return 0;
@@ -9401,6 +9402,8 @@ static int sctp_sock_migrate(struct sock
return err;
}
+ sctp_auto_asconf_init(newsp);
+
/* Move any messages in the old socket's receive queue that are for the
* peeled off association to the new socket's receive queue.
*/
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (676 preceding siblings ...)
2021-05-12 14:52 ` [PATCH 5.12 677/677] sctp: delay auto_asconf init until binding the first addr Greg Kroah-Hartman
@ 2021-05-12 17:23 ` Naresh Kamboju
2021-05-12 17:56 ` Greg Kroah-Hartman
2021-05-12 19:38 ` Florian Fainelli
` (5 subsequent siblings)
683 siblings, 1 reply; 694+ messages in thread
From: Naresh Kamboju @ 2021-05-12 17:23 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
MIPS Clang build regression detected.
MIPS gcc-10,9 and 8 build PASS.
> Maciej W. Rozycki <macro@orcam.me.uk>
> MIPS: Reinstate platform `__div64_32' handler
mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
- mips (defconfig) with clang-12
- mips (tinyconfig) with clang-12
- mips (allnoconfig) with clang-12
make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
clang'
kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
for constraint 'x'
do_div(tmp, (u32) div);
^
include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
__rem = __div64_32(&(n), __base); \
^
arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
__asm__("divu $0, %z1, %z2" \
^
1 error generated.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
steps to reproduce:
--------------------------
#!/bin/sh
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of
# architectures, toolchains, kernel configurations, and make targets.
#
# TuxMake supports the concept of runtimes.
# See https://docs.tuxmake.org/runtimes/, for that to work it requires
# that you install podman or docker on your system.
#
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
#
# See https://docs.tuxmake.org/ for complete documentation.
tuxmake --runtime podman --target-arch mips --toolchain clang-12
--kconfig defconfig
build ref:
https://builds.tuxbuild.com/1sRW8pJDUO08LLScNJnPlFqm8lV/
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 17:23 ` [PATCH 5.12 000/677] 5.12.4-rc1 review Naresh Kamboju
@ 2021-05-12 17:56 ` Greg Kroah-Hartman
2021-05-12 18:48 ` Naresh Kamboju
0 siblings, 1 reply; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 17:56 UTC (permalink / raw)
To: Naresh Kamboju
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Wed, May 12, 2021 at 10:53:04PM +0530, Naresh Kamboju wrote:
> On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.12.4 release.
> > There are 677 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
>
> MIPS Clang build regression detected.
> MIPS gcc-10,9 and 8 build PASS.
>
> > Maciej W. Rozycki <macro@orcam.me.uk>
> > MIPS: Reinstate platform `__div64_32' handler
>
> mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
> - mips (defconfig) with clang-12
> - mips (tinyconfig) with clang-12
> - mips (allnoconfig) with clang-12
>
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
> CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
> clang'
> kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
> for constraint 'x'
> do_div(tmp, (u32) div);
> ^
> include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
> __rem = __div64_32(&(n), __base); \
> ^
> arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
> __asm__("divu $0, %z1, %z2" \
> ^
> 1 error generated.
Does this also show up in Linus's tree? The same MIPS patch is there as
well from what I can tell.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 17:56 ` Greg Kroah-Hartman
@ 2021-05-12 18:48 ` Naresh Kamboju
2021-05-12 18:51 ` Greg Kroah-Hartman
2021-05-12 19:04 ` Linus Torvalds
0 siblings, 2 replies; 694+ messages in thread
From: Naresh Kamboju @ 2021-05-12 18:48 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Wed, 12 May 2021 at 23:26, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Wed, May 12, 2021 at 10:53:04PM +0530, Naresh Kamboju wrote:
> > On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 5.12.4 release.
> > > There are 677 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> > > or in the git tree and branch at:
> > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> >
> > MIPS Clang build regression detected.
> > MIPS gcc-10,9 and 8 build PASS.
> >
> > > Maciej W. Rozycki <macro@orcam.me.uk>
> > > MIPS: Reinstate platform `__div64_32' handler
> >
> > mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
> > - mips (defconfig) with clang-12
> > - mips (tinyconfig) with clang-12
> > - mips (allnoconfig) with clang-12
> >
> > make --silent --keep-going --jobs=8
> > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
> > CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
> > clang'
> > kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
> > for constraint 'x'
> > do_div(tmp, (u32) div);
> > ^
> > include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
> > __rem = __div64_32(&(n), __base); \
> > ^
> > arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
> > __asm__("divu $0, %z1, %z2" \
> > ^
> > 1 error generated.
>
> Does this also show up in Linus's tree? The same MIPS patch is there as
> well from what I can tell.
No.
Linus's tree builds MIPS clang successfully.
- Naresh
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 18:48 ` Naresh Kamboju
@ 2021-05-12 18:51 ` Greg Kroah-Hartman
2021-05-12 19:04 ` Nathan Chancellor
2021-05-12 19:04 ` Linus Torvalds
1 sibling, 1 reply; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 18:51 UTC (permalink / raw)
To: Naresh Kamboju
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Thu, May 13, 2021 at 12:18:32AM +0530, Naresh Kamboju wrote:
> On Wed, 12 May 2021 at 23:26, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Wed, May 12, 2021 at 10:53:04PM +0530, Naresh Kamboju wrote:
> > > On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
> > > <gregkh@linuxfoundation.org> wrote:
> > > >
> > > > This is the start of the stable review cycle for the 5.12.4 release.
> > > > There are 677 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> > > > Anything received after that time might be too late.
> > > >
> > > > The whole patch series can be found in one patch at:
> > > > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> > > > or in the git tree and branch at:
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> > > > and the diffstat can be found below.
> > > >
> > > > thanks,
> > > >
> > > > greg k-h
> > >
> > >
> > > MIPS Clang build regression detected.
> > > MIPS gcc-10,9 and 8 build PASS.
> > >
> > > > Maciej W. Rozycki <macro@orcam.me.uk>
> > > > MIPS: Reinstate platform `__div64_32' handler
> > >
> > > mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
> > > - mips (defconfig) with clang-12
> > > - mips (tinyconfig) with clang-12
> > > - mips (allnoconfig) with clang-12
> > >
> > > make --silent --keep-going --jobs=8
> > > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
> > > CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
> > > clang'
> > > kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
> > > for constraint 'x'
> > > do_div(tmp, (u32) div);
> > > ^
> > > include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
> > > __rem = __div64_32(&(n), __base); \
> > > ^
> > > arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
> > > __asm__("divu $0, %z1, %z2" \
> > > ^
> > > 1 error generated.
> >
> > Does this also show up in Linus's tree? The same MIPS patch is there as
> > well from what I can tell.
>
> No.
> Linus's tree builds MIPS clang successfully.
Ick, ok, I'll go drop this and let a MIPS developer send us the correct
thing.
thanks!
greg k-h
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 18:51 ` Greg Kroah-Hartman
@ 2021-05-12 19:04 ` Nathan Chancellor
2021-05-12 19:07 ` Greg Kroah-Hartman
2021-05-13 8:30 ` Naresh Kamboju
0 siblings, 2 replies; 694+ messages in thread
From: Nathan Chancellor @ 2021-05-12 19:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, Naresh Kamboju
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On 5/12/2021 11:51 AM, Greg Kroah-Hartman wrote:
> On Thu, May 13, 2021 at 12:18:32AM +0530, Naresh Kamboju wrote:
>> On Wed, 12 May 2021 at 23:26, Greg Kroah-Hartman
>> <gregkh@linuxfoundation.org> wrote:
>>>
>>> On Wed, May 12, 2021 at 10:53:04PM +0530, Naresh Kamboju wrote:
>>>> On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
>>>> <gregkh@linuxfoundation.org> wrote:
>>>>>
>>>>> This is the start of the stable review cycle for the 5.12.4 release.
>>>>> There are 677 patches in this series, all will be posted as a response
>>>>> to this one. If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
>>>>> or in the git tree and branch at:
>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>
>>>>
>>>> MIPS Clang build regression detected.
>>>> MIPS gcc-10,9 and 8 build PASS.
>>>>
>>>>> Maciej W. Rozycki <macro@orcam.me.uk>
>>>>> MIPS: Reinstate platform `__div64_32' handler
>>>>
>>>> mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
>>>> - mips (defconfig) with clang-12
>>>> - mips (tinyconfig) with clang-12
>>>> - mips (allnoconfig) with clang-12
>>>>
>>>> make --silent --keep-going --jobs=8
>>>> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
>>>> CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
>>>> clang'
>>>> kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
>>>> for constraint 'x'
>>>> do_div(tmp, (u32) div);
>>>> ^
>>>> include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
>>>> __rem = __div64_32(&(n), __base); \
>>>> ^
>>>> arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
>>>> __asm__("divu $0, %z1, %z2" \
>>>> ^
>>>> 1 error generated.
>>>
>>> Does this also show up in Linus's tree? The same MIPS patch is there as
>>> well from what I can tell.
>>
>> No.
>> Linus's tree builds MIPS clang successfully.
>
> Ick, ok, I'll go drop this and let a MIPS developer send us the correct
> thing.
>
> thanks!
>
> greg k-h
>
I think you just need to grab commits c1d337d45ec0 ("MIPS: Avoid DIVU in
`__div64_32' is result would be zero") and 25ab14cbe9d1 ("MIPS: Avoid
handcoded DIVU in `__div64_32' altogether") to fix this up.
Cheers,
Nathan
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 18:48 ` Naresh Kamboju
2021-05-12 18:51 ` Greg Kroah-Hartman
@ 2021-05-12 19:04 ` Linus Torvalds
2021-05-12 20:38 ` Maciej W. Rozycki
1 sibling, 1 reply; 694+ messages in thread
From: Linus Torvalds @ 2021-05-12 19:04 UTC (permalink / raw)
To: Naresh Kamboju
Cc: Greg Kroah-Hartman, open list, Shuah Khan, Florian Fainelli,
patches, lkft-triage, Jon Hunter, linux-stable, Pavel Machek,
Andrew Morton, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Wed, May 12, 2021 at 11:48 AM Naresh Kamboju
<naresh.kamboju@linaro.org> wrote:
>
> Linus's tree builds MIPS clang successfully.
Note that this might just be a random effect of inlining or other
register allocation pressure details.
So it's possible that upstream builds mostly by luck.
The "couldn't allocate output register" thing really does seem more
like a compiler issue than a kernel source code issue.
Linus
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 19:04 ` Nathan Chancellor
@ 2021-05-12 19:07 ` Greg Kroah-Hartman
2021-05-12 20:22 ` Maciej W. Rozycki
2021-05-13 8:30 ` Naresh Kamboju
1 sibling, 1 reply; 694+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-12 19:07 UTC (permalink / raw)
To: Nathan Chancellor
Cc: Naresh Kamboju, open list, Shuah Khan, Florian Fainelli, patches,
lkft-triage, Jon Hunter, linux-stable, Pavel Machek,
Andrew Morton, Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
On Wed, May 12, 2021 at 12:04:04PM -0700, Nathan Chancellor wrote:
> On 5/12/2021 11:51 AM, Greg Kroah-Hartman wrote:
> > On Thu, May 13, 2021 at 12:18:32AM +0530, Naresh Kamboju wrote:
> > > On Wed, 12 May 2021 at 23:26, Greg Kroah-Hartman
> > > <gregkh@linuxfoundation.org> wrote:
> > > >
> > > > On Wed, May 12, 2021 at 10:53:04PM +0530, Naresh Kamboju wrote:
> > > > > On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
> > > > > <gregkh@linuxfoundation.org> wrote:
> > > > > >
> > > > > > This is the start of the stable review cycle for the 5.12.4 release.
> > > > > > There are 677 patches in this series, all will be posted as a response
> > > > > > to this one. If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > >
> > > > > > Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> > > > > > Anything received after that time might be too late.
> > > > > >
> > > > > > The whole patch series can be found in one patch at:
> > > > > > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> > > > > > or in the git tree and branch at:
> > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> > > > > > and the diffstat can be found below.
> > > > > >
> > > > > > thanks,
> > > > > >
> > > > > > greg k-h
> > > > >
> > > > >
> > > > > MIPS Clang build regression detected.
> > > > > MIPS gcc-10,9 and 8 build PASS.
> > > > >
> > > > > > Maciej W. Rozycki <macro@orcam.me.uk>
> > > > > > MIPS: Reinstate platform `__div64_32' handler
> > > > >
> > > > > mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
> > > > > - mips (defconfig) with clang-12
> > > > > - mips (tinyconfig) with clang-12
> > > > > - mips (allnoconfig) with clang-12
> > > > >
> > > > > make --silent --keep-going --jobs=8
> > > > > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
> > > > > CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
> > > > > clang'
> > > > > kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
> > > > > for constraint 'x'
> > > > > do_div(tmp, (u32) div);
> > > > > ^
> > > > > include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
> > > > > __rem = __div64_32(&(n), __base); \
> > > > > ^
> > > > > arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
> > > > > __asm__("divu $0, %z1, %z2" \
> > > > > ^
> > > > > 1 error generated.
> > > >
> > > > Does this also show up in Linus's tree? The same MIPS patch is there as
> > > > well from what I can tell.
> > >
> > > No.
> > > Linus's tree builds MIPS clang successfully.
> >
> > Ick, ok, I'll go drop this and let a MIPS developer send us the correct
> > thing.
> >
> > thanks!
> >
> > greg k-h
> >
>
> I think you just need to grab commits c1d337d45ec0 ("MIPS: Avoid DIVU in
> `__div64_32' is result would be zero") and 25ab14cbe9d1 ("MIPS: Avoid
> handcoded DIVU in `__div64_32' altogether") to fix this up.
It was easier for me to drop it, let's see if any MIPS developers (are
there any anymore?) care enough to send the proper series.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (677 preceding siblings ...)
2021-05-12 17:23 ` [PATCH 5.12 000/677] 5.12.4-rc1 review Naresh Kamboju
@ 2021-05-12 19:38 ` Florian Fainelli
2021-05-12 22:11 ` Shuah Khan
` (4 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Florian Fainelli @ 2021-05-12 19:38 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, stable
On 5/12/2021 7:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 19:07 ` Greg Kroah-Hartman
@ 2021-05-12 20:22 ` Maciej W. Rozycki
0 siblings, 0 replies; 694+ messages in thread
From: Maciej W. Rozycki @ 2021-05-12 20:22 UTC (permalink / raw)
To: Thomas Bogendoerfer, Greg Kroah-Hartman
Cc: Nathan Chancellor, Naresh Kamboju, open list, Shuah Khan,
Florian Fainelli, patches, lkft-triage, Jon Hunter, linux-stable,
Pavel Machek, Andrew Morton, Linus Torvalds, Guenter Roeck,
clang-built-linux, Huacai Chen
On Wed, 12 May 2021, Greg Kroah-Hartman wrote:
> > > > > > mips clang build breaks on stable rc 5.4 .. 5.12 due to below warnings / errors
> > > > > > - mips (defconfig) with clang-12
> > > > > > - mips (tinyconfig) with clang-12
> > > > > > - mips (allnoconfig) with clang-12
> > > > > >
> > > > > > make --silent --keep-going --jobs=8
> > > > > > O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=mips
> > > > > > CROSS_COMPILE=mips-linux-gnu- 'HOSTCC=sccache clang' 'CC=sccache
> > > > > > clang'
> > > > > > kernel/time/hrtimer.c:318:2: error: couldn't allocate output register
> > > > > > for constraint 'x'
> > > > > > do_div(tmp, (u32) div);
> > > > > > ^
> > > > > > include/asm-generic/div64.h:243:11: note: expanded from macro 'do_div'
> > > > > > __rem = __div64_32(&(n), __base); \
> > > > > > ^
> > > > > > arch/mips/include/asm/div64.h:74:11: note: expanded from macro '__div64_32'
> > > > > > __asm__("divu $0, %z1, %z2" \
> > > > > > ^
> > > > > > 1 error generated.
> > > > >
> > > > > Does this also show up in Linus's tree? The same MIPS patch is there as
> > > > > well from what I can tell.
> > > >
> > > > No.
> > > > Linus's tree builds MIPS clang successfully.
> > >
> > > Ick, ok, I'll go drop this and let a MIPS developer send us the correct
> > > thing.
> > >
> > > thanks!
> > >
> > > greg k-h
> > >
> >
> > I think you just need to grab commits c1d337d45ec0 ("MIPS: Avoid DIVU in
> > `__div64_32' is result would be zero") and 25ab14cbe9d1 ("MIPS: Avoid
> > handcoded DIVU in `__div64_32' altogether") to fix this up.
>
> It was easier for me to drop it, let's see if any MIPS developers (are
> there any anymore?) care enough to send the proper series.
Thomas, I told you it would work better if the original fix was replaced
ahead of a pull request to Linus rather than updated with the follow-ups.
Will you be able to fix up the mess in this case? I can offer no more
than just the commits quoted above, there's no better fix.
Maciej
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 19:04 ` Linus Torvalds
@ 2021-05-12 20:38 ` Maciej W. Rozycki
0 siblings, 0 replies; 694+ messages in thread
From: Maciej W. Rozycki @ 2021-05-12 20:38 UTC (permalink / raw)
To: Linus Torvalds
Cc: Naresh Kamboju, Greg Kroah-Hartman, open list, Shuah Khan,
Florian Fainelli, patches, lkft-triage, Jon Hunter, linux-stable,
Pavel Machek, Andrew Morton, Guenter Roeck, clang-built-linux,
Thomas Bogendoerfer, Huacai Chen
On Wed, 12 May 2021, Linus Torvalds wrote:
> Note that this might just be a random effect of inlining or other
> register allocation pressure details.
>
> So it's possible that upstream builds mostly by luck.
>
> The "couldn't allocate output register" thing really does seem more
> like a compiler issue than a kernel source code issue.
Nope, `x' is the constraint for the multiply-divide unit/MDU accumulator
register used for calculation output; there's only one, comprised of the
HI and LO parts. This register was removed as from the MIPSr6 ISA, which
I forgot that we support (unlike the microMIPSr6 ISA), in favour to using
regular GPRs, in a slightly different manner.
Rather than cluttering code with #ifdefs for the updated MIPSr6 divide
and modulo instructions I chose to rewrite this piece in plain C, which
actually makes pre-MIPSr6 code slightly better owing to better instruction
scheduling (the pre-MIPSr6 MDU runs asynchronously and its output is only
interlocked on read access to the accumulator register).
NB I don't know if Clang actually supports the `x' constraint even with
pre-MIPSr6 code; as it has turned out it has deficiencies compared to GCC
with inline asm handling with the MIPS target. OTOH GCC has supported it
since ~1991 if memory serves me, when MIPS support was initially added.
Maciej
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (678 preceding siblings ...)
2021-05-12 19:38 ` Florian Fainelli
@ 2021-05-12 22:11 ` Shuah Khan
2021-05-13 10:08 ` Fox Chen
` (3 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Shuah Khan @ 2021-05-12 22:11 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable, Shuah Khan
On 5/12/21 8:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 19:04 ` Nathan Chancellor
2021-05-12 19:07 ` Greg Kroah-Hartman
@ 2021-05-13 8:30 ` Naresh Kamboju
1 sibling, 0 replies; 694+ messages in thread
From: Naresh Kamboju @ 2021-05-13 8:30 UTC (permalink / raw)
To: Nathan Chancellor, Greg Kroah-Hartman, Sasha Levin
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck, clang-built-linux,
Maciej W. Rozycki, Thomas Bogendoerfer, Huacai Chen
> I think you just need to grab commits c1d337d45ec0 ("MIPS: Avoid DIVU in
> `__div64_32' is result would be zero") and 25ab14cbe9d1 ("MIPS: Avoid
> handcoded DIVU in `__div64_32' altogether") to fix this up.
I have cherry-picked these two patches on stable-rc 5.4, 5.10, 5.11 and 5.12
and the MIPS clang builds PASS.
- Naresh
^ permalink raw reply [flat|nested] 694+ messages in thread
* RE: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (679 preceding siblings ...)
2021-05-12 22:11 ` Shuah Khan
@ 2021-05-13 10:08 ` Fox Chen
2021-05-13 10:30 ` Naresh Kamboju
` (2 subsequent siblings)
683 siblings, 0 replies; 694+ messages in thread
From: Fox Chen @ 2021-05-13 10:08 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, stable, Fox Chen
On Wed, 12 May 2021 16:40:46 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.12.4-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <foxhlchen@gmail.com>
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (680 preceding siblings ...)
2021-05-13 10:08 ` Fox Chen
@ 2021-05-13 10:30 ` Naresh Kamboju
2021-05-13 18:12 ` Justin Forbes
2021-05-13 20:33 ` Guenter Roeck
683 siblings, 0 replies; 694+ messages in thread
From: Naresh Kamboju @ 2021-05-13 10:30 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck
On Wed, 12 May 2021 at 21:27, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
Apart from mips clang build failures no other new test failures noticed.
## Build
* kernel: 5.12.4-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.12.y
* git commit: 6c1612b7930018e618fc920494f1982130d24d5b
* git describe: v5.12.2-1062-g6c1612b79300
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.12.y/build/v5.12.2-1062-g6c1612b79300
## Regressions (compared to v5.12.2-384-gb0def16b48b3)
* mips, build
- clang-10-allnoconfig
- clang-10-defconfig
- clang-10-tinyconfig
- clang-11-allnoconfig
- clang-11-defconfig
- clang-11-tinyconfig
- clang-12-allnoconfig
- clang-12-defconfig
- clang-12-tinyconfig
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
## No fixes (compared to v5.12.2-384-gb0def16b48b3)
## Test result summary
total: 73854, pass: 62161, fail: 1288, skip: 10405, xfail: 0,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* i386: 25 total, 25 passed, 0 failed
* mips: 45 total, 36 passed, 9 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kvm
* kselftest-lib
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (681 preceding siblings ...)
2021-05-13 10:30 ` Naresh Kamboju
@ 2021-05-13 18:12 ` Justin Forbes
2021-05-13 20:33 ` Guenter Roeck
683 siblings, 0 replies; 694+ messages in thread
From: Justin Forbes @ 2021-05-13 18:12 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: LKML, Linus Torvalds, Andrew Morton, Guenter Roeck, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli, Stable
On Wed, May 12, 2021 at 11:41 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.4-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
^ permalink raw reply [flat|nested] 694+ messages in thread
* Re: [PATCH 5.12 000/677] 5.12.4-rc1 review
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
` (682 preceding siblings ...)
2021-05-13 18:12 ` Justin Forbes
@ 2021-05-13 20:33 ` Guenter Roeck
683 siblings, 0 replies; 694+ messages in thread
From: Guenter Roeck @ 2021-05-13 20:33 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Wed, May 12, 2021 at 04:40:46PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.4 release.
> There are 677 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 14 May 2021 14:47:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 151 pass: 151 fail: 0
Qemu test results:
total: 462 pass: 461 fail: 1
Failed tests:
mipsel:mips32r6-generic:malta_32r6_defconfig:nocd:smp:net,pcnet:ide:rootfs
Failure as already reported.
Guenter
^ permalink raw reply [flat|nested] 694+ messages in thread
end of thread, other threads:[~2021-05-13 20:33 UTC | newest]
Thread overview: 694+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-12 14:40 [PATCH 5.12 000/677] 5.12.4-rc1 review Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 001/677] Bluetooth: verify AMP hci_chan before amp_destroy Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 002/677] bluetooth: eliminate the potential race condition when removing the HCI controller Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 003/677] net/nfc: fix use-after-free llcp_sock_bind/connect Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 004/677] io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 005/677] coresight: etm-perf: Fix define build issue when built as module Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 006/677] software node: Allow node addition to already existing device Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 007/677] Revert "USB: cdc-acm: fix rounding error in TIOCSSERIAL" Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 008/677] usb: roles: Call try_module_get() from usb_role_switch_find_by_fwnode() Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 009/677] tty: moxa: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 010/677] tty: amiserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 011/677] USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 012/677] staging: greybus: uart: " Greg Kroah-Hartman
2021-05-12 14:40 ` [PATCH 5.12 013/677] USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 014/677] staging: fwserial: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 015/677] tty: moxa: fix TIOCSSERIAL permission check Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 016/677] tty: mxser: fix TIOCSSERIAL jiffies conversions Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 017/677] staging: fwserial: fix TIOCSSERIAL permission check Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 018/677] tty: mxser: " Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 019/677] drm: bridge: fix LONTIUM use of mipi_dsi_() functions Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 020/677] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 021/677] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 022/677] usb: typec: tcpm: update power supply once partner accepts Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 023/677] USB: serial: xr: fix CSIZE handling Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 024/677] usb: xhci-mtk: remove or operator for setting schedule parameters Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 025/677] usb: xhci-mtk: improve bandwidth scheduling with TT Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 026/677] ASoC: samsung: tm2_wm5110: check of of_parse return value Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 027/677] ASoC: Intel: kbl_da7219_max98927: Fix kabylake_ssp_fixup function Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 028/677] ASoC: tlv320aic32x4: Register clocks before registering component Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 029/677] ASoC: tlv320aic32x4: Increase maximum register in regmap Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 030/677] MIPS: pci-mt7620: fix PLL lock check Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 031/677] MIPS: pci-rt2880: fix slot 0 configuration Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 032/677] FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 033/677] PCI: Allow VPD access for QLogic ISP2722 Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 034/677] KVM: x86: Defer the MMU unload to the normal path on an global INVPCID Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 035/677] PCI: xgene: Fix cfg resource mapping Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 036/677] PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 037/677] PM / devfreq: Unlock mutex and free devfreq struct in error path Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 038/677] soc/tegra: regulators: Fix locking up when voltage-spread is out of range Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 039/677] iio: inv_mpu6050: Fully validate gyro and accel scale writes Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 040/677] iio: magnetometer: yas530: Include right header Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 041/677] iio: sx9310: Fix write_.._debounce() Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 042/677] iio:accel:adis16201: Fix wrong axis assignment that prevents loading Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 043/677] iio:adc:ad7476: Fix remove handling Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 044/677] iio: magnetometer: yas530: Fix return value on error path Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 045/677] iio: sx9310: Fix access to variable DT array Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 046/677] iio: hid-sensor-rotation: Fix quaternion data not correct Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 047/677] sc16is7xx: Defer probe if device read fails Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 048/677] phy: cadence: Sierra: Fix PHY power_on sequence Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 049/677] misc: lis3lv02d: Fix false-positive WARN on various HP models Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 050/677] phy: ti: j721e-wiz: Invoke wiz_init() before of_platform_device_create() Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 051/677] misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 052/677] misc: vmw_vmci: explicitly initialize vmci_datagram payload Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 053/677] selinux: add proper NULL termination to the secclass_map permissions Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 054/677] x86, sched: Treat Intel SNC topology as default, COD as exception Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 055/677] async_xor: increase src_offs when dropping destination page Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 056/677] md/bitmap: wait for external bitmap writes to complete during tear down Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 057/677] md-cluster: fix use-after-free issue when removing rdev Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 058/677] md: split mddev_find Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 059/677] md: factor out a mddev_find_locked helper from mddev_find Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 060/677] md: md_open returns -EBUSY when entering racing area Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 061/677] md: Fix missing unused status line of /proc/mdstat Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 062/677] MIPS: Reinstate platform `__div64_32 handler Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 063/677] MIPS: generic: Update node names to avoid unit addresses Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 064/677] mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put() Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 065/677] ipw2x00: potential buffer overflow in libipw_wx_set_encodeext() Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 066/677] net: xilinx: drivers need/depend on HAS_IOMEM Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 067/677] cfg80211: scan: drop entry from hidden_list on overflow Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 068/677] rtw88: Fix array overrun in rtw_get_tx_power_params() Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 069/677] mt76: fix potential DMA mapping leak Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 070/677] FDDI: defxx: Make MMIO the configuration default except for EISA Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 071/677] drm/qxl: use ttm bo priorities Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 072/677] drm/ingenic: Fix non-OSD mode Greg Kroah-Hartman
2021-05-12 14:41 ` [PATCH 5.12 073/677] drm/panfrost: Clear MMU irqs before handling the fault Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 074/677] drm/panfrost: Dont try to map pages that are already mapped Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 075/677] drm/radeon: fix copy of uninitialized variable back to userspace Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 076/677] drm/dp_mst: Revise broadcast msg lct & lcr Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 077/677] drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 078/677] drm: bridge: fix ANX7625 use of mipi_dsi_() functions Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 079/677] drm: bridge/panel: Cleanup connector on bridge detach Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 080/677] drm/amd/display: Reject non-zero src_y and src_x for video planes Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 081/677] drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 082/677] drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 083/677] drm/amdgpu: fix r initial values Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 084/677] drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 085/677] ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 086/677] ALSA: hda/realtek: Re-order ALC882 Sony " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 087/677] ALSA: hda/realtek: Re-order ALC882 Clevo " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 088/677] ALSA: hda/realtek: Re-order ALC269 HP " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 089/677] ALSA: hda/realtek: Re-order ALC269 Acer " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 090/677] ALSA: hda/realtek: Re-order ALC269 Dell " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 091/677] ALSA: hda/realtek: Re-order ALC269 ASUS " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 092/677] ALSA: hda/realtek: Re-order ALC269 Sony " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 093/677] ALSA: hda/realtek: Re-order ALC269 Lenovo " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 094/677] ALSA: hda/realtek: Re-order remaining ALC269 " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 095/677] ALSA: hda/realtek: Re-order ALC662 " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 096/677] ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 097/677] ALSA: hda/realtek: ALC285 Thinkpad jack pin quirk is unreachable Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 098/677] ALSA: hda/realtek: Fix speaker amp on HP Envy AiO 32 Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 099/677] KVM: s390: VSIE: correctly handle MVPG when in VSIE Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 100/677] KVM: s390: split kvm_s390_logical_to_effective Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 101/677] KVM: s390: fix guarded storage control register handling Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 102/677] s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 103/677] KVM: s390: VSIE: fix MVPG handling for prefixing and MSO Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 104/677] KVM: s390: split kvm_s390_real_to_abs Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 105/677] KVM: s390: extend kvm_s390_shadow_fault to return entry pointer Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 106/677] KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 107/677] KVM: x86/xen: Drop RAX[63:32] when processing hypercall Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 108/677] KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 109/677] KVM: x86: Properly handle APF vs disabled LAPIC situation Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 110/677] KVM: x86: Check CR3 GPA for validity regardless of vCPU mode Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 111/677] KVM: x86: Remove emulators broken checks on CR0/CR3/CR4 loads Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 112/677] KVM: nSVM: Set the shadow root level to the TDP level for nested NPT Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 113/677] KVM: SVM: Dont strip the C-bit from CR2 on #PF interception Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 114/677] KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 115/677] KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 116/677] KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 117/677] KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 118/677] KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 119/677] KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 120/677] KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 121/677] KVM: nVMX: Truncate base/index GPR value on address calc " Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 122/677] KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 123/677] KVM: Destroy I/O bus devices on unregister failure _after_ syncing SRCU Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 124/677] KVM: Stop looking for coalesced MMIO zones if the bus is destroyed Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 125/677] KVM: arm64: Support PREL/PLT relocs in EL2 code Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 126/677] KVM: arm64: Fully zero the vcpu state on reset Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 127/677] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 128/677] KVM: selftests: Sync data verify of dirty logging with guest sync Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 129/677] KVM: selftests: Always run vCPU thread with blocked SIG_IPI Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 130/677] Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit" Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 131/677] Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register" Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 132/677] mfd: stmpe: Revert "Constify static struct resource" Greg Kroah-Hartman
2021-05-12 14:42 ` [PATCH 5.12 133/677] ovl: fix missing revert_creds() on error path Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 134/677] Revert "drm/qxl: do not run release if qxl failed to init" Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 135/677] usb: gadget: pch_udc: Revert d3cb25a12138 completely Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 136/677] Revert "tools/power turbostat: adjust for temperature offset" Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 137/677] firmware: xilinx: Fix dereferencing freed memory Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 138/677] firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE) Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 139/677] x86/vdso: Use proper modifier for lens format specifier in extract() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 140/677] fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 141/677] crypto: keembay-ocs-hcu - Fix error return code in kmb_ocs_hcu_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 142/677] crypto: keembay-ocs-aes - Fix error return code in kmb_ocs_aes_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 143/677] crypto: sun8i-ss - fix result memory leak on error path Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 144/677] memory: gpmc: fix out of bounds read and dereference on gpmc_cs[] Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 145/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 146/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 147/677] ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 148/677] ARM: dts: exynos: correct MUIC " Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 149/677] ARM: dts: exynos: correct PMIC " Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 150/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 151/677] ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 152/677] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 153/677] ARM: dts: exynos: correct PMIC interrupt trigger level on Snow Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 154/677] ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 155/677] ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 156/677] arm64: dts: renesas: Add mmc aliases into " Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 157/677] bus: ti-sysc: Fix initializing module_pa for modules without sysc register Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 158/677] x86/platform/uv: Set section block size for hubless architectures Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 159/677] serial: stm32: fix probe and remove order for dma Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 160/677] serial: stm32: fix startup by enabling usart for reception Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 161/677] serial: stm32: fix incorrect characters on console Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 162/677] serial: stm32: fix TX and RX FIFO thresholds Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 163/677] serial: stm32: fix a deadlock condition with wakeup event Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 164/677] serial: stm32: fix wake-up flag handling Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 165/677] serial: stm32: fix a deadlock in set_termios Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 166/677] serial: liteuart: fix return value check in liteuart_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 167/677] serial: stm32: fix tx dma completion, release channel Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 168/677] serial: stm32: call stm32_transmit_chars locked Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 169/677] serial: stm32: fix FIFO flush in startup and set_termios Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 170/677] serial: stm32: add FIFO flush when port is closed Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 171/677] serial: stm32: fix tx_empty condition Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 172/677] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 173/677] usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 174/677] usb: typec: tps6598x: Fix return value check in tps6598x_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 175/677] usb: typec: stusb160x: fix return value check in stusb160x_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 176/677] mfd: intel_pmt: Fix nuisance messages and handling of disabled capabilities Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 177/677] regmap: set debugfs_name to NULL after it is freed Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 178/677] spi: rockchip: avoid objtool warning Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 179/677] arm64: dts: broadcom: bcm4908: fix switch parent node name Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 180/677] mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 181/677] mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 182/677] mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 183/677] mtd: rawnand: qcom: Return actual error code instead of -ENODEV Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 184/677] mtd: dont lock when recursively deleting partitions Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 185/677] mtd: parsers: qcom: Fix error condition Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 186/677] mtd: parsers: qcom: incompatible with spi-nor 4k sectors Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 187/677] mtd: maps: fix error return code of physmap_flash_remove() Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 188/677] ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 189/677] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 190/677] iio: adis16480: fix pps mode sampling frequency math Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 191/677] arm64: dts: qcom: sc7180: trogdor: Fix trip point config of charger thermal zone Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 192/677] arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity Greg Kroah-Hartman
2021-05-12 14:43 ` [PATCH 5.12 193/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 194/677] arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 195/677] arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 196/677] arm64: dts: qcom: sdm845: fix number of pins in gpio-ranges Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 197/677] arm64: dts: qcom: sm8150: " Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 198/677] arm64: dts: qcom: sm8250: " Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 199/677] arm64: dts: qcom: sm8350: " Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 200/677] arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 201/677] crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 202/677] spi: stm32: drop devres version of spi_register_master Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 203/677] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 204/677] regulator: bd9576: Fix return from bd957x_probe() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 205/677] arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 206/677] selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 207/677] crypto: arm/blake2s - fix for big endian Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 208/677] spi: stm32: Fix use-after-free on unbind Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 209/677] Drivers: hv: vmbus: Drop error message when No request id available Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 210/677] staging: qlge: fix an error code in probe() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 211/677] x86/microcode: Check for offline CPUs before requesting new microcode Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 212/677] usb: host: ehci-tegra: Select USB_GADGET Kconfig option Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 213/677] devtmpfs: fix placement of complete() call Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 214/677] usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 215/677] usb: gadget: pch_udc: Check if driver is present before calling ->setup() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 216/677] usb: gadget: pch_udc: Check for DMA mapping error Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 217/677] usb: gadget: pch_udc: Initialize device pointer before use Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 218/677] usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1) Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 219/677] crypto: ccp - fix command queuing to TEE ring buffer Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 220/677] crypto: qat - dont release uninitialized resources Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 221/677] crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 222/677] fotg210-udc: Fix DMA on EP0 for length > max packet size Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 223/677] fotg210-udc: Fix EP0 IN requests bigger than two packets Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 224/677] fotg210-udc: Remove a dubious condition leading to fotg210_done Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 225/677] fotg210-udc: Mask GRP2 interrupts we dont handle Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 226/677] fotg210-udc: Dont DMA more than the buffer can take Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 227/677] fotg210-udc: Complete OUT requests on short packets Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 228/677] usb: gadget: s3c: Fix incorrect resources releasing Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 229/677] usb: gadget: s3c: Fix the error handling path in s3c2410_udc_probe() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 230/677] dt-bindings: serial: stm32: Use type: object instead of false for additionalProperties Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 231/677] mtd: require write permissions for locking and badblock ioctls Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 232/677] arm64: dts: renesas: r8a779a0: Fix PMU interrupt Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 233/677] arm64: dts: mt8183: Add gce client reg for display subcomponents Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 234/677] arm64: dts: mt8173: fix wrong power-domain phandle of pmic Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 235/677] bus: qcom: Put child node before return Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 236/677] arm64: dts: qcom: sm8250: fix display nodes Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 237/677] soundwire: bus: Fix device found flag correctly Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 238/677] soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 239/677] phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 240/677] phy: ralink: phy-mt7621-pci: fix XTAL bitmask Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 241/677] phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 242/677] phy: ralink: phy-mt7621-pci: fix return value check in mt7621_pci_phy_probe() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 243/677] phy: ingenic: Fix a typo in ingenic_usb_phy_probe() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 244/677] arm64: dts: mediatek: fix reset GPIO level on pumpkin Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 245/677] NFSv4.2: fix copy stateid copying for the async copy Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 246/677] crypto: poly1305 - fix poly1305_core_setkey() declaration Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 247/677] crypto: qat - fix error path in adf_isr_resource_alloc() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 248/677] usb: gadget: aspeed: fix dma map failure Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 249/677] USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR() Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 250/677] drivers: nvmem: Fix voltage settings for QTI qfprom-efuse Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 251/677] nvmem: rmem: fix undefined reference to memremap Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 252/677] driver core: platform: Declare early_platform_cleanup() prototype Greg Kroah-Hartman
2021-05-12 14:44 ` [PATCH 5.12 253/677] ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger level Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 254/677] ARM: dts: qcom: msm8974-samsung-klte: " Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 255/677] memory: pl353: fix mask of ECC page_size config register Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 256/677] soundwire: stream: fix memory leak in stream config error path Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 257/677] m68k: mvme147,mvme16x: Dont wipe PCC timer config bits Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 258/677] firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 259/677] firmware: qcom_scm: Reduce locking section for __get_convention() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 260/677] firmware: qcom_scm: Workaround lack of "is available" call on SC7180 Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 261/677] iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 262/677] mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 263/677] irqchip/gic-v3: Fix OF_BAD_ADDR error handling Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 264/677] staging: comedi: tests: ni_routes_test: Fix compilation error Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 265/677] staging: rtl8192u: Fix potential infinite loop Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 266/677] staging: fwserial: fix TIOCSSERIAL implementation Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 267/677] staging: fwserial: fix TIOCGSERIAL implementation Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 268/677] staging: greybus: uart: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 269/677] platform/x86: dell-wmi-sysman: Make init_bios_attributes() ACPI object parsing more robust Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 270/677] soc: qcom: pdr: Fix error return code in pdr_register_listener Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 271/677] PM / devfreq: Use more accurate returned new_freq as resume_freq Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 272/677] clocksource/drivers/timer-ti-dm: Fix posted mode status check order Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 273/677] clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 274/677] clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 275/677] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 276/677] spi: fsl: add missing iounmap() on error in of_fsl_spi_probe() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 277/677] soc: qcom: mdt_loader: Validate that p_filesz < p_memsz Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 278/677] soc: qcom: mdt_loader: Detect truncated read of segments Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 279/677] PM: runtime: Replace inline function pm_runtime_callbacks_present() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 280/677] cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 281/677] ACPI: CPPC: Replace cppc_attr with kobj_attribute Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 282/677] crypto: allwinner - add missing CRYPTO_ prefix Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 283/677] crypto: sun8i-ss - Fix memory leak of pad Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 284/677] crypto: sa2ul - Fix memory leak of rxd Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 285/677] crypto: qat - Fix a double free in adf_create_ring Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 286/677] cpufreq: armada-37xx: Fix setting TBG parent for load levels Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 287/677] clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 288/677] cpufreq: armada-37xx: Fix the AVS value for load L1 Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 289/677] clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 290/677] clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 291/677] cpufreq: armada-37xx: Fix driver cleanup when registration failed Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 292/677] cpufreq: armada-37xx: Fix determining base CPU frequency Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 293/677] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 294/677] spi: spi-zynqmp-gqspi: add mutex locking for exec_op Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 295/677] spi: spi-zynqmp-gqspi: transmit dummy circles by using the controllers internal functionality Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 296/677] spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 297/677] spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 298/677] usb: gadget: r8a66597: Add missing null check on return from platform_get_resource Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 299/677] USB: cdc-acm: fix unprivileged TIOCCSERIAL Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 300/677] USB: cdc-acm: fix TIOCGSERIAL implementation Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 301/677] tty: actually undefine superseded ASYNC flags Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 302/677] tty: fix return value for unsupported ioctls Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 303/677] tty: fix return value for unsupported termiox ioctls Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 304/677] serial: core: return early on unsupported ioctls Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 305/677] firmware: qcom-scm: Fix QCOM_SCM configuration Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 306/677] node: fix device cleanups in error handling code Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 307/677] crypto: chelsio - Read rxchannel-id from firmware Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 308/677] usbip: vudc: fix missing unlock on error in usbip_sockfd_store() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 309/677] m68k: Add missing mmap_read_lock() to sys_cacheflush() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 310/677] usb: cdnsp: Fixes issue with Configure Endpoint command Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 311/677] spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op() Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 312/677] memory: renesas-rpc-if: fix possible NULL pointer dereference of resource Greg Kroah-Hartman
2021-05-12 14:45 ` [PATCH 5.12 313/677] memory: samsung: exynos5422-dmc: handle clk_set_parent() failure Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 314/677] security: keys: trusted: fix TPM2 authorizations Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 315/677] char: tpm: fix error return code in tpm_cr50_i2c_tis_recv() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 316/677] platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 317/677] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 318/677] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 319/677] ARM: dts: aspeed: Rainier: Fix humidity sensor bus address Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 320/677] Drivers: hv: vmbus: Use after free in __vmbus_open() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 321/677] crypto: arm64/aes-ce - deal with oversight in new CTR carry code Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 322/677] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 323/677] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 324/677] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 325/677] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 326/677] btrfs: zoned: move log tree node allocation out of log_root_tree->log_mutex Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 327/677] btrfs: zoned: bail out in btrfs_alloc_chunk for bad input Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 328/677] x86/platform/uv: Fix !KEXEC build failure Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 329/677] hwmon: (pmbus/pxe1610) dont bail out when not all pages are active Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 330/677] platform/surface: aggregator: fix a bit test Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 331/677] Drivers: hv: vmbus: Increase wait time for VMbus unload Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 332/677] PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 333/677] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 334/677] usb: dwc2: Fix hibernation between host and device modes Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 335/677] ttyprintk: Add TTY hangup callback Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 336/677] serial: omap: dont disable rs485 if rts gpio is missing Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 337/677] serial: omap: fix rs485 half-duplex filtering Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 338/677] spi: tools: make a symbolic link to the header file spi.h Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 339/677] xen-blkback: fix compatibility bug with single page rings Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 340/677] soc: aspeed: fix a ternary sign expansion bug Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 341/677] drm/tilcdc: send vblank event when disabling crtc Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 342/677] drm/stm: Fix bus_flags handling Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 343/677] drm/amd/display: Fix off by one in hdmi_14_process_transaction() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 344/677] drm/mcde/panel: Inverse misunderstood flag Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 345/677] scsi: lpfc: Fix null pointer dereference in lpfc_prep_els_iocb() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 346/677] sched/fair: Fix shift-out-of-bounds in load_balance() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 347/677] printk: limit second loop of syslog_print_all Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 348/677] afs: Fix updating of i_mode due to 3rd party change Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 349/677] rcu: Remove spurious instrumentation_end() in rcu_nmi_enter() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 350/677] media: mtk: fix mtk-smi dependency Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 351/677] media: vivid: fix assignment of dev->fbuf_out_flags Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 352/677] media: saa7134: use sg_dma_len when building pgtable Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 353/677] media: saa7146: " Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 354/677] media: omap4iss: return error code when omap4iss_get() failed Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 355/677] media: rkisp1: rsz: crash fix when setting src format Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 356/677] media: aspeed: fix clock handling logic Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 357/677] drm/panel-simple: Undo enable if HPD never asserts Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 358/677] power: supply: bq27xxx: fix sign of current_now for newer ICs Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 359/677] drm/probe-helper: Check epoch counter in output_poll_execute() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 360/677] media: venus: core: Fix some resource leaks in the error path of venus_probe() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 361/677] media: platform: sunxi: sun6i-csi: fix error return code of sun6i_video_start_streaming() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 362/677] media: m88ds3103: fix return value check in m88ds3103_probe() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 363/677] media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30 Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 364/677] media: [next] staging: media: atomisp: fix memory leak of object flash Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 365/677] media: atomisp: Fixed error handling path Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 366/677] media: m88rs6000t: avoid potential out-of-bounds reads on arrays Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 367/677] media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 368/677] x86/kprobes: Retrieve correct opcode for group instruction Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 369/677] drm/amdkfd: fix build error with AMD_IOMMU_V2=m Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 370/677] drm/amdkfd: Fix recursive lock warnings Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 371/677] drm/amd/display: Free local data after use Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 372/677] of: overlay: fix for_each_child.cocci warnings Greg Kroah-Hartman
2021-05-12 14:46 ` [PATCH 5.12 373/677] scsi: qla2xxx: Check kzalloc() return value Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 374/677] x86/kprobes: Fix to check non boostable prefixes correctly Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 375/677] drm/omap: dsi: Add missing IRQF_ONESHOT Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 376/677] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS) Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 377/677] pata_arasan_cf: fix IRQ check Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 378/677] pata_ipx4xx_cf: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 379/677] sata_mv: add IRQ checks Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 380/677] ata: libahci_platform: fix IRQ check Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 381/677] seccomp: Fix CONFIG tests for Seccomp_filters Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 382/677] drm/mediatek: Switch the hdmi bridge ops to the atomic versions Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 383/677] drm/mediatek: Dont support hdmi connector creation Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 384/677] nvme-tcp: block BH in sk state_change sk callback Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 385/677] nvmet-tcp: fix incorrect locking in " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 386/677] clk: imx: Fix reparenting of UARTs not associated with stdout Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 387/677] power: supply: bq25980: Move props from battery node Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 388/677] nvme: retrigger ANA log update if group descriptor isnt found Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 389/677] media: ccs: Fix sub-device function Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 390/677] media: ipu3-cio2: Fix pixel-rate derived link frequency Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 391/677] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 392/677] media: i2c: imx219: Balance runtime PM use-count Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 393/677] media: v4l2-ctrls.c: fix race condition in hdl->requests list Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 394/677] media: rkvdec: Do not require all controls to be present in every request Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 395/677] vfio/fsl-mc: Re-order vfio_fsl_mc_probe() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 396/677] vfio/pci: Move VGA and VF initialization to functions Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 397/677] vfio/pci: Re-order vfio_pci_probe() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 398/677] drm/msm: Fix debugfs deadlock Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 399/677] drm/msm/dpu: enable DPU_SSPP_QOS_8LVL for SM8250 Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 400/677] vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 401/677] clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 402/677] clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 403/677] drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 404/677] media: i2c: rdamc21: Fix warning on u8 cast Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 405/677] clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 406/677] clk: qcom: a53-pll: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 407/677] clk: qcom: apss-ipq-pll: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 408/677] drm/amd/display: use GFP_ATOMIC in dcn20_resource_construct Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 409/677] drm/amd/display: check fb of primary plane Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 410/677] drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 411/677] bcache: Use 64-bit arithmetic instead of 32-bit Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 412/677] clk: uniphier: Fix potential infinite loop Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 413/677] scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 414/677] scsi: pm80xx: Fix potential infinite loop Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 415/677] scsi: ufs: ufshcd-pltfrm: Fix deferred probing Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 416/677] scsi: hisi_sas: Fix IRQ checks Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 417/677] scsi: jazz_esp: Add IRQ check Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 418/677] scsi: sun3x_esp: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 419/677] scsi: sni_53c710: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 420/677] scsi: ibmvfc: Fix invalid state machine BUG_ON() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 421/677] mailbox: sprd: Introduce refcnt when clients requests/free channels Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 422/677] mfd: stm32-timers: Avoid clearing auto reload register Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 423/677] nvmet-tcp: fix a segmentation fault during io parsing error Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 424/677] nvme-pci: dont simple map sgl when sgls are disabled Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 425/677] media: meson-ge2d: fix rotation parameters Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 426/677] media: cedrus: Fix H265 status definitions Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 427/677] HSI: core: fix resource leaks in hsi_add_client_from_dt() Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 428/677] x86/events/amd/iommu: Fix sysfs type mismatch Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 429/677] perf/amd/uncore: " Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 430/677] io_uring: fix overflows checks in provide buffers Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 431/677] block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 432/677] sched/debug: Fix cgroup_path[] serialization Greg Kroah-Hartman
2021-05-12 14:47 ` [PATCH 5.12 433/677] kthread: Fix PF_KTHREAD vs to_kthread() race Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 434/677] ataflop: potential out of bounds in do_format() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 435/677] ataflop: fix off by one in ataflop_probe() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 436/677] drivers/block/null_blk/main: Fix a double free in null_init Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 437/677] xsk: Respect devices headroom and tailroom on generic xmit path Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 438/677] HID: plantronics: Workaround for double volume key presses Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 439/677] perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 440/677] ASoC: Intel: boards: sof-wm8804: add check for PLL setting Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 441/677] ASoC: Intel: Skylake: Compile when any configuration is selected Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 442/677] RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mr Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 443/677] RDMA/mlx5: Fix query RoCE port Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 444/677] RDMA/mlx5: Fix mlx5 rates to IB rates map Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 445/677] net/mlx5: DR, Add missing vhca_id consume from STEv1 Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 446/677] wilc1000: write value to WILC_INTR2_ENABLE register Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 447/677] KVM: x86/mmu: Retry page faults that hit an invalid memslot Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 448/677] Bluetooth: avoid deadlock between hci_dev->lock and socket lock Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 449/677] net: lapbether: Prevent racing when checking whether the netif is running Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 450/677] libbpf: Add explicit padding to bpf_xdp_set_link_opts Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 451/677] bpftool: Fix maybe-uninitialized warnings Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 452/677] iommu: Check dev->iommu in iommu_dev_xxx functions Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 453/677] iommu/dma: Resurrect the "forcedac" option Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 454/677] iommu/vt-d: Reject unsupported page request modes Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 455/677] ASoC: tegra30: i2s: Restore hardware state on runtime PM resume Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 456/677] net: dsa: bcm_sf2: add function finding RGMII register Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 457/677] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s) Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 458/677] selftests/bpf: Re-generate vmlinux.h and BPF skeletons if bpftool changed Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 459/677] libbpf: Add explicit padding to btf_dump_emit_type_decl_opts Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 460/677] powerpc/mm: Move the linear_mapping_mutex to the ifdef where it is used Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 461/677] powerpc/fadump: Mark fadump_calculate_reserve_size as __init Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 462/677] powerpc/prom: Mark identical_pvr_fixup " Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 463/677] MIPS: fix local_irq_{disable,enable} in asmmacro.h Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 464/677] ima: Fix the error code for restoring the PCR value Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 465/677] inet: use bigger hash table for IP ID generation Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 466/677] pinctrl: pinctrl-single: remove unused parameter Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 467/677] pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zero Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 468/677] MIPS: loongson64: fix bug when PAGE_SIZE > 16KB Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 469/677] ASoC: wm8960: Remove bitclk relax condition in wm8960_configure_sysclk Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 470/677] iommu/arm-smmu-v3: add bit field SFM into GERROR_ERR_MASK Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 471/677] RDMA/mlx5: Fix drop packet rule in egress table Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 472/677] IB/isert: Fix a use after free in isert_connect_request Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 473/677] powerpc/64s: Fix hash fault to use TRAP accessor Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 474/677] powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 475/677] MIPS/bpf: Enable bpf_probe_read{, str}() on MIPS again Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 476/677] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 477/677] fs: dlm: fix missing unlock on error in accept_from_sock() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 478/677] ASoC: q6afe-clocks: fix reprobing of the driver Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 479/677] ALSA: core: remove redundant spin_lock pair in snd_card_disconnect Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 480/677] net: phy: lan87xx: fix access to wrong register of LAN87xx Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 481/677] udp: skip L4 aggregation for UDP tunnel packets Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 482/677] udp: never accept GSO_FRAGLIST packets Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 483/677] powerpc/pseries: Only register vio drivers if vio bus exists Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 484/677] net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 485/677] bug: Remove redundant condition check in report_bug Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 486/677] RDMA/core: Fix corrupted SL on passive side Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 487/677] nfc: pn533: prevent potential memory corruption Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 488/677] net: hns3: Limiting the scope of vector_ring_chain variable Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 489/677] mips: bmips: fix syscon-reboot nodes Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 490/677] KVM: arm64: Fix error return code in init_hyp_mode() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 491/677] iommu/vt-d: Dont set then clear private data in prq_event_thread() Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 492/677] iommu: Fix a boundary issue to avoid performance drop Greg Kroah-Hartman
2021-05-12 14:48 ` [PATCH 5.12 493/677] iommu/vt-d: Report right snoop capability when using FL for IOVA Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 494/677] iommu/vt-d: Report the right page fault address Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 495/677] iommu/vt-d: Remove WO permissions on second-level paging entries Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 496/677] iommu/vt-d: Invalidate PASID cache when root/context entry changed Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 497/677] ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 498/677] HID: lenovo: Use brightness_set_blocking callback for setting LEDs brightness Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 499/677] HID: lenovo: Fix lenovo_led_set_tp10ubkbd() error handling Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 500/677] HID: lenovo: Check hid_get_drvdata() returns non NULL in lenovo_event() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 501/677] HID: lenovo: Map mic-mute button to KEY_F20 instead of KEY_MICMUTE Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 502/677] KVM: arm64: Initialize VCPU mdcr_el2 before loading it Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 503/677] ASoC: simple-card: fix possible uninitialized single_cpu local variable Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 504/677] liquidio: Fix unintented sign extension of a left shift of a u16 Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 505/677] IB/hfi1: Use kzalloc() for mmu_rb_handler allocation Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 506/677] powerpc/64s: Fix pte update for kernel memory on radix Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 507/677] powerpc/pseries: Add key to flags in pSeries_lpar_hpte_updateboltedpp() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 508/677] powerpc/64s: Use htab_convert_pte_flags() in hash__mark_rodata_ro() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 509/677] powerpc/perf: Fix PMU constraint check for EBB events Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 510/677] powerpc: iommu: fix build when neither PCI or IBMVIO is set Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 511/677] mac80211: bail out if cipher schemes are invalid Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 512/677] perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metric Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 513/677] RDMA/hns: Fix missing assignment of max_inline_data Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 514/677] xfs: fix return of uninitialized value in variable error Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 515/677] rtw88: Fix an error code in rtw_debugfs_set_rsvd_page() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 516/677] mt7601u: fix always true expression Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 517/677] mt76: mt7615: fix tx skb dma unmap Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 518/677] mt76: mt7915: " Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 519/677] mt76: mt7921: fix suspend/resume sequence Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 520/677] mt76: mt7921: fix memory leak in mt7921_coredump_work Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 521/677] mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 522/677] mt76: mt7921: fixup rx bitrate statistics Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 523/677] mt76: mt7615: fix memory leak in mt7615_coredump_work Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 524/677] mt76: mt7921: fix aggr length histogram Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 525/677] mt76: mt7915: fix aggr len debugfs node Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 526/677] mt76: mt7921: fix stats register definitions Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 527/677] mt76: mt7615: fix TSF configuration Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 528/677] mt76: mt7615: fix mib stats counter reporting to mac80211 Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 529/677] mt76: mt7915: " Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 530/677] mt76: connac: fix kernel warning adding monitor interface Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 531/677] mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 532/677] mt76: mt7921: fix the base of PCIe interrupt Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 533/677] mt76: mt7921: fix the base of the dynamic remap Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 534/677] mt76: mt7915: fix rxrate reporting Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 535/677] mt76: mt7915: fix txrate reporting Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 536/677] mt76: mt7663: fix when beacon filter is being applied Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 537/677] mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 538/677] mt76: mt7663s: fix the possible device hang in high traffic Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 539/677] mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 540/677] mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 541/677] mt76: mt7921: always wake the device in mt7921_remove_interface Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 542/677] mt76: mt7921: fix inappropriate WoW setup with the missing ARP informaiton Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 543/677] mt76: mt7921: fix the dwell time control Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 544/677] KVM: PPC: Book3S HV P9: Restore host CTRL SPR after guest exit Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 545/677] ovl: show "userxattr" in the mount data Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 546/677] ovl: invalidate readdir cache on changes to dir with origin Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 547/677] RDMA/qedr: Fix error return code in qedr_iw_connect() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 548/677] IB/hfi1: Fix error return code in parse_platform_config() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 549/677] RDMA/bnxt_re: Fix error return code in bnxt_qplib_cq_process_terminal() Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 550/677] cxgb4: Fix unintentional sign extension issues Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 551/677] net: thunderx: Fix unintentional sign extension issue Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 552/677] mt76: mt7921: fix kernel crash when the firmware fails to download Greg Kroah-Hartman
2021-05-12 14:49 ` [PATCH 5.12 553/677] RDMA/srpt: Fix error return code in srpt_cm_req_recv() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 554/677] RDMA/rtrs-clt: destroy sysfs after removing session from active list Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 555/677] pinctrl: at91-pio4: Fix slew rate disablement Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 556/677] i2c: cadence: fix reference leak when pm_runtime_get_sync fails Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 557/677] i2c: img-scb: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 558/677] i2c: imx-lpi2c: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 559/677] i2c: imx: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 560/677] i2c: omap: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 561/677] i2c: sprd: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 562/677] i2c: stm32f7: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 563/677] i2c: xiic: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 564/677] i2c: cadence: add IRQ check Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 565/677] i2c: emev2: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 566/677] i2c: jz4780: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 567/677] i2c: mlxbf: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 568/677] i2c: rcar: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 569/677] i2c: sh7760: " Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 570/677] fuse: fix matching of FUSE_DEV_IOC_CLONE command Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 571/677] iwlwifi: rs-fw: dont support stbc for HE 160 Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 572/677] iwlwifi: dbg: disable ini debug in 9000 family and below Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 573/677] powerpc/xive: Drop check on irq_data in xive_core_debug_show() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 574/677] powerpc/xive: Fix xmon command "dxi" Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 575/677] powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 576/677] ASoC: ak5558: correct reset polarity Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 577/677] net/mlx5: Fix bit-wise and with zero Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 578/677] net/packet: remove data races in fanout operations Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 579/677] drm/i915/gvt: Fix error code in intel_gvt_init_device() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 580/677] iommu/vt-d: Fix an error handling path in intel_prepare_irq_remapping() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 581/677] iommu/amd: Put newline after closing bracket in warning Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 582/677] perf beauty: Fix fsconfig generator Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 583/677] drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 584/677] drm/amd/pm: fix error code in smu_set_power_limit() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 585/677] MIPS: pci-legacy: stop using of_pci_range_to_resource Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 586/677] powerpc/pseries: extract host bridge from pci_bus prior to bus removal Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 587/677] iommu/mediatek: Always enable the clk on resume Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 588/677] mptcp: fix format specifiers for unsigned int Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 589/677] powerpc/smp: Reintroduce cpu_core_mask Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 590/677] KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 591/677] rtlwifi: 8821ae: upgrade PHY and RF parameters Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 592/677] wlcore: fix overlapping snprintf arguments in debugfs Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 593/677] i2c: sh7760: fix IRQ error path Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 594/677] i2c: mediatek: Fix wrong dma sync flag Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 595/677] mwl8k: Fix a double Free in mwl8k_probe_hw Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 596/677] netfilter: nft_payload: fix C-VLAN offload support Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 597/677] netfilter: nftables_offload: VLAN id needs host byteorder in flow dissector Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 598/677] netfilter: nftables_offload: special ethertype handling for VLAN Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 599/677] vsock/vmci: log once the failed queue pair allocation Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 600/677] libbpf: Initialize the bpf_seq_printf parameters array field by field Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 601/677] net: ethernet: ixp4xx: Set the DMA masks explicitly Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 602/677] gro: fix napi_gro_frags() Fast GRO breakage due to IP alignment check Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 603/677] RDMA/cxgb4: add missing qpid increment Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 604/677] RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 605/677] ALSA: usb: midi: dont return -ENOMEM when usb_urb_ep_type_check fails Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 606/677] sfc: ef10: fix TX queue lookup in TX event handling Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 607/677] vsock/virtio: free queued packets when closing socket Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 608/677] net: marvell: prestera: fix port event handling on init Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 609/677] net: davinci_emac: Fix incorrect masking of tx and rx error channel Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 610/677] rtw88: refine napi deinit flow Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 611/677] mt76: mt7615: fix memleak when mt7615_unregister_device() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 612/677] mt76: mt7915: fix memleak when mt7915_unregister_device() Greg Kroah-Hartman
2021-05-12 14:50 ` [PATCH 5.12 613/677] mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutex Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 614/677] powerpc/pseries/iommu: Fix window size for direct mapping with pmem Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 615/677] crypto: ccp: Detect and reject "invalid" addresses destined for PSP Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 616/677] net: dsa: mv88e6xxx: Fix off-by-one in VTU devlink region size Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 617/677] nfp: devlink: initialize the devlink port attribute "lanes" Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 618/677] net: stmmac: fix TSO and TBS feature enabling during driver open Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 619/677] net: renesas: ravb: Fix a stuck issue when a lot of frames are received Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 620/677] net: phy: intel-xway: enable integrated led functions Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 621/677] mt76: mt7615: Fix a dereference of pointer sta before it is null checked Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 622/677] mt76: mt7921: fix possible invalid register access Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 623/677] RDMA/rxe: Fix a bug in rxe_fill_ip_info() Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 624/677] RDMA/core: Add CM to restrack after successful attachment to a device Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 625/677] powerpc/64: Fix the definition of the fixmap area Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 626/677] ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 627/677] ath10k: Fix a use after free in ath10k_htc_send_bundle Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 628/677] ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lock Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 629/677] wlcore: Fix buffer overrun by snprintf due to incorrect buffer size Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 630/677] powerpc/perf: Fix the threshold event selection for memory events in power10 Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 631/677] powerpc/52xx: Fix an invalid ASM expression (addi used instead of add) Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 632/677] net: phy: marvell: fix m88e1011_set_downshift Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 633/677] net: phy: marvell: fix m88e1111_set_downshift Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 634/677] net: enetc: fix link error again Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 635/677] net, xdp: Update pkt_type if generic XDP changes unicast MAC Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 636/677] bnxt_en: fix ternary sign extension bug in bnxt_show_temp() Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 637/677] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 638/677] arm64: " Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 639/677] net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 640/677] selftests: net: mirror_gre_vlan_bridge_1q: Make an FDB entry static Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 641/677] selftests: mlxsw: Remove a redundant if statement in port_scale test Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 642/677] selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 643/677] mptcp: Retransmit DATA_FIN Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 644/677] bnxt_en: Fix RX consumer index logic in the error path Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 645/677] KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 646/677] KVM: SVM: Zero out the VMCB array used to track SEV ASID association Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 647/677] KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 648/677] KVM: SVM: Disable SEV/SEV-ES if NPT is disabled Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 649/677] net/sched: act_ct: fix wild memory access when clearing fragments Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 650/677] net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 651/677] selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 652/677] selftests/bpf: Fix field existence CO-RE reloc tests Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 653/677] selftests/bpf: Fix core_reloc test runner Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 654/677] bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 655/677] RDMA/siw: Fix a use after free in siw_alloc_mr Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 656/677] RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 657/677] net: bridge: mcast: fix broken length + header check for MRDv6 Adv Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 658/677] net: dsa: mv88e6xxx: Fix 6095/6097/6185 ports in non-SERDES CMODE Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 659/677] net:nfc:digital: Fix a double free in digital_tg_recv_dep_req Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 660/677] perf tools: Change fields type in perf_record_time_conv Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 661/677] perf jit: Let convert_timestamp() to be backwards-compatible Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 662/677] perf session: Add swap operation for event TIME_CONV Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 663/677] ia64: ensure proper NUMA distance and possible map initialization Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 664/677] ia64: fix EFI_DEBUG build Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 665/677] kfifo: fix ternary sign extension bugs Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 666/677] mm, slub: enable slub_debug static key when creating cache with explicit debug flags Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 667/677] mm: memcontrol: slab: fix obtain a reference to a freeing memcg Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 668/677] mm/sparse: add the missing sparse_buffer_fini() in error branch Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 669/677] mm/memory-failure: unnecessary amount of unmapping Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 670/677] afs: Fix speculative status fetches Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 671/677] bpf: Fix alu32 const subreg bound tracking on bitwise operations Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 672/677] bpf, ringbuf: Deny reserve of buffers larger than ringbuf Greg Kroah-Hartman
2021-05-12 14:51 ` [PATCH 5.12 673/677] bpf: Prevent writable memory-mapping of read-only ringbuf pages Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 674/677] net: Only allow init netns to set default tcp cong to a restricted algo Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 675/677] smp: Fix smp_call_function_single_async prototype Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 676/677] Revert "net/sctp: fix race condition in sctp_destroy_sock" Greg Kroah-Hartman
2021-05-12 14:52 ` [PATCH 5.12 677/677] sctp: delay auto_asconf init until binding the first addr Greg Kroah-Hartman
2021-05-12 17:23 ` [PATCH 5.12 000/677] 5.12.4-rc1 review Naresh Kamboju
2021-05-12 17:56 ` Greg Kroah-Hartman
2021-05-12 18:48 ` Naresh Kamboju
2021-05-12 18:51 ` Greg Kroah-Hartman
2021-05-12 19:04 ` Nathan Chancellor
2021-05-12 19:07 ` Greg Kroah-Hartman
2021-05-12 20:22 ` Maciej W. Rozycki
2021-05-13 8:30 ` Naresh Kamboju
2021-05-12 19:04 ` Linus Torvalds
2021-05-12 20:38 ` Maciej W. Rozycki
2021-05-12 19:38 ` Florian Fainelli
2021-05-12 22:11 ` Shuah Khan
2021-05-13 10:08 ` Fox Chen
2021-05-13 10:30 ` Naresh Kamboju
2021-05-13 18:12 ` Justin Forbes
2021-05-13 20:33 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).