linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Ardelean <aardelean@deviqon.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, Jonathan.Cameron@huawei.com,
	alexandru.tachici@analog.com, linux@deviqon.com,
	Alexandru Ardelean <aardelean@deviqon.com>
Subject: [PATCH v3 08/12] iio: adc: ad7780: convert to device-managed functions
Date: Wed, 12 May 2021 20:49:10 +0300	[thread overview]
Message-ID: <20210512174914.10549-9-aardelean@deviqon.com> (raw)
In-Reply-To: <20210512174914.10549-1-aardelean@deviqon.com>

With the devm_ad_sd_setup_buffer_and_trigger() helper, it's a bit easier
now to convert the probe of the AD7780 driver to use device-managed
functions.

Only the regulator disable requires a devm_add_action_or_reset() callback.

This change does that, cleaning up the driver a bit.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/adc/ad7780.c | 38 ++++++++++----------------------------
 1 file changed, 10 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c
index 42e7e8e595d1..42bb952f4738 100644
--- a/drivers/iio/adc/ad7780.c
+++ b/drivers/iio/adc/ad7780.c
@@ -300,6 +300,11 @@ static int ad7780_init_gpios(struct device *dev, struct ad7780_state *st)
 	return 0;
 }
 
+static void ad7780_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
 static int ad7780_probe(struct spi_device *spi)
 {
 	struct ad7780_state *st;
@@ -318,8 +323,6 @@ static int ad7780_probe(struct spi_device *spi)
 	st->chip_info =
 		&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];
 
-	spi_set_drvdata(spi, indio_dev);
-
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &st->chip_info->channel;
@@ -340,35 +343,15 @@ static int ad7780_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+	ret = devm_add_action_or_reset(&spi->dev, ad7780_reg_disable, st->reg);
 	if (ret)
-		goto error_disable_reg;
+		return ret;
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
 	if (ret)
-		goto error_cleanup_buffer_and_trigger;
-
-	return 0;
-
-error_cleanup_buffer_and_trigger:
-	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_disable_reg:
-	regulator_disable(st->reg);
-
-	return ret;
-}
-
-static int ad7780_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7780_state *st = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-
-	regulator_disable(st->reg);
+		return ret;
 
-	return 0;
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct spi_device_id ad7780_id[] = {
@@ -385,7 +368,6 @@ static struct spi_driver ad7780_driver = {
 		.name	= "ad7780",
 	},
 	.probe		= ad7780_probe,
-	.remove		= ad7780_remove,
 	.id_table	= ad7780_id,
 };
 module_spi_driver(ad7780_driver);
-- 
2.31.1


  parent reply	other threads:[~2021-05-12 19:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-12 17:49 [PATCH v3 00/12] ad_sigma_delta: convert all drivers to device-managed Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 01/12] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 02/12] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value Alexandru Ardelean
2021-05-13  7:41   ` Lars-Peter Clausen
2021-05-13  9:11     ` Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 05/12] iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 06/12] iio: adc: ad7793: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 07/12] iio: adc: ad7791: " Alexandru Ardelean
2021-05-12 17:49 ` Alexandru Ardelean [this message]
2021-05-12 17:49 ` [PATCH v3 09/12] iio: adc: ad7192: use devm_clk_get_optional() for mclk Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 10/12] iio: adc: ad7192: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 11/12] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 12/12] iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Alexandru Ardelean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210512174914.10549-9-aardelean@deviqon.com \
    --to=aardelean@deviqon.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alexandru.tachici@analog.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@deviqon.com \
    --subject='Re: [PATCH v3 08/12] iio: adc: ad7780: convert to device-managed functions' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).