* [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
@ 2021-04-13 14:45 Michal Vokáč
2021-04-13 15:03 ` Andrew Lunn
2021-05-13 3:47 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Michal Vokáč @ 2021-04-13 14:45 UTC (permalink / raw)
To: Rob Herring, Shawn Guo
Cc: Fabio Estevam, devicetree, linux-kernel, Andrew Lunn,
Michal Vokáč,
stable
The FEC does not have a PHY so it should not have a phy-handle. It is
connected to the switch at RGMII level so we need a fixed-link sub-node
on both ends.
This was not a problem until the qca8k.c driver was converted to PHYLINK
by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
PHYLIB"). That commit revealed the FEC configuration was not correct.
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 111d4d331f98..686dab57a1e4 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -121,9 +121,13 @@
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
- phy-handle = <ðphy0>;
status = "okay";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
mdio {
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
2021-04-13 14:45 [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Michal Vokáč
@ 2021-04-13 15:03 ` Andrew Lunn
2021-05-13 3:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Lunn @ 2021-04-13 15:03 UTC (permalink / raw)
To: Michal Vokáč
Cc: Rob Herring, Shawn Guo, Fabio Estevam, devicetree, linux-kernel, stable
On Tue, Apr 13, 2021 at 04:45:57PM +0200, Michal Vokáč wrote:
> The FEC does not have a PHY so it should not have a phy-handle. It is
> connected to the switch at RGMII level so we need a fixed-link sub-node
> on both ends.
>
> This was not a problem until the qca8k.c driver was converted to PHYLINK
> by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
> PHYLIB"). That commit revealed the FEC configuration was not correct.
>
> Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
> Cc: stable@vger.kernel.org
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
2021-04-13 14:45 [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Michal Vokáč
2021-04-13 15:03 ` Andrew Lunn
@ 2021-05-13 3:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2021-05-13 3:47 UTC (permalink / raw)
To: Michal Vokáč
Cc: Rob Herring, Fabio Estevam, devicetree, linux-kernel,
Andrew Lunn, stable
On Tue, Apr 13, 2021 at 04:45:57PM +0200, Michal Vokáč wrote:
> The FEC does not have a PHY so it should not have a phy-handle. It is
> connected to the switch at RGMII level so we need a fixed-link sub-node
> on both ends.
>
> This was not a problem until the qca8k.c driver was converted to PHYLINK
> by commit b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of
> PHYLIB"). That commit revealed the FEC configuration was not correct.
>
> Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
> Cc: stable@vger.kernel.org
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-05-13 3:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-13 14:45 [PATCH] ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Michal Vokáč
2021-04-13 15:03 ` Andrew Lunn
2021-05-13 3:47 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).