[PATCH 5.4 133/141] ARM: 9012/1: move device tree mapping out of linear region

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Ard Biesheuvel <ardb@kernel.org>

commit 7a1be318f5795cb66fa0dc86b3ace427fe68057f upstream

On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.

Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.

Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/arm/memory.rst  |    7 ++++++-
 arch/arm/include/asm/fixmap.h |    2 +-
 arch/arm/include/asm/memory.h |    5 +++++
 arch/arm/kernel/head.S        |    5 ++---
 arch/arm/kernel/setup.c       |   11 ++++++++---
 arch/arm/mm/init.c            |    1 -
 arch/arm/mm/mmu.c             |   20 ++++++++++++++------
 arch/arm/mm/pv-fixup-asm.S    |    4 ++--
 8 files changed, 38 insertions(+), 17 deletions(-)

--- a/Documentation/arm/memory.rst
+++ b/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#define FIXADDR_START		0xffc00000UL
+#define FIXADDR_START		0xffc80000UL
 #define FIXADDR_END		0xfff00000UL
 #define FIXADDR_TOP		(FIXADDR_END - PAGE_SIZE)
 
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -67,6 +67,10 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
+#define FDT_FIXED_BASE		UL(0xff800000)
+#define FDT_FIXED_SIZE		(2 * PMD_SIZE)
+#define FDT_VIRT_ADDR(physaddr)	((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
 #define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
+#define FDT_VIRT_ADDR(physaddr)  ((void *)(physaddr))
 
 #endif /* !CONFIG_MMU */
 
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -275,9 +275,8 @@ __create_page_tables:
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
-	subne	r3, r0, r8
-	addne	r3, r3, #PAGE_OFFSET
-	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	addne	r3, r3, r4
 	orrne	r6, r7, r0
 	strne	r6, [r3], #1 << PMD_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
+#include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -89,7 +90,6 @@ unsigned int cacheid __read_mostly;
 EXPORT_SYMBOL(cacheid);
 
 unsigned int __atags_pointer __initdata;
-void *atags_vaddr __initdata;
 
 unsigned int system_rev;
 EXPORT_SYMBOL(system_rev);
@@ -1077,13 +1077,18 @@ void __init hyp_mode_check(void)
 void __init setup_arch(char **cmdline_p)
 {
 	const struct machine_desc *mdesc = NULL;
+	void *atags_vaddr = NULL;
 
 	if (__atags_pointer)
-		atags_vaddr = phys_to_virt(__atags_pointer);
+		atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
 
 	setup_processor();
-	if (atags_vaddr)
+	if (atags_vaddr) {
 		mdesc = setup_machine_fdt(atags_vaddr);
+		if (mdesc)
+			memblock_reserve(__atags_pointer,
+					 fdt_totalsize(atags_vaddr));
+	}
 	if (!mdesc)
 		mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
 	if (!mdesc) {
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -274,7 +274,6 @@ void __init arm_memblock_init(const stru
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	early_init_fdt_reserve_self();
 	early_init_fdt_scan_reserved_mem();
 
 	/* reserve memory for DMA contiguous allocations */
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -39,6 +39,8 @@
 #include "mm.h"
 #include "tcm.h"
 
+extern unsigned long __atags_pointer;
+
 /*
  * empty_zero_page is a special page that is used for
  * zero-initialized data and COW.
@@ -962,7 +964,7 @@ static void __init create_mapping(struct
 		return;
 	}
 
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	if (md->type == MT_DEVICE &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
 	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1352,6 +1354,15 @@ static void __init devicemaps_init(const
 	for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+	if (__atags_pointer) {
+		/* create a read-only mapping of the device tree */
+		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+		map.virtual = FDT_FIXED_BASE;
+		map.length = FDT_FIXED_SIZE;
+		map.type = MT_ROM;
+		create_mapping(&map);
+	}
+
 	/*
 	 * Map the kernel if it is XIP.
 	 * It is always first in the modulearea.
@@ -1512,8 +1523,7 @@ static void __init map_lowmem(void)
 }
 
 #ifdef CONFIG_ARM_PV_FIXUP
-extern void *atags_vaddr;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
 pgtables_remap lpae_pgtables_remap_asm;
 
 /*
@@ -1526,7 +1536,6 @@ static void __init early_paging_init(con
 	unsigned long pa_pgd;
 	unsigned int cr, ttbcr;
 	long long offset;
-	void *boot_data;
 
 	if (!mdesc->pv_fixup)
 		return;
@@ -1543,7 +1552,6 @@ static void __init early_paging_init(con
 	 */
 	lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
 	pa_pgd = __pa(swapper_pg_dir);
-	boot_data = atags_vaddr;
 	barrier();
 
 	pr_info("Switching physical address space to 0x%08llx\n",
@@ -1579,7 +1587,7 @@ static void __init early_paging_init(con
 	 * needs to be assembly.  It's fairly simple, as we're using the
 	 * temporary tables setup by the initial assembly code.
 	 */
-	lpae_pgtables_remap(offset, pa_pgd, boot_data);
+	lpae_pgtables_remap(offset, pa_pgd);
 
 	/* Re-enable the caches and cacheable TLB walks */
 	asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
--- a/arch/arm/mm/pv-fixup-asm.S
+++ b/arch/arm/mm/pv-fixup-asm.S
@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
 
 	/* Update level 2 entries for the boot data */
 	add	r7, r2, #0x1000
-	add	r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
-	bic	r7, r7, #(1 << L2_ORDER) - 1
+	movw	r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+	add	r7, r7, r3
 	ldrd	r4, r5, [r7]
 	adds	r4, r4, r0
 	adc	r5, r5, r1