From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, Peter Rosin <peda@axentia.se>,
Wolfram Sang <wsa@kernel.org>
Cc: linux-kernel@vger.kernel.org,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Jacopo Mondi" <jacopo+renesas@jmondi.org>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Kishon Vijay Abraham I" <kishon@ti.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Lee Jones" <lee.jones@linaro.org>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Roger Quadros" <rogerq@ti.com>,
"Jonathan Cameron" <jic23@kernel.org>
Subject: [PATCH 0/6] dt-bindings: Convert mux bindings to schema
Date: Tue, 18 May 2021 18:28:52 -0500 [thread overview]
Message-ID: <20210518232858.1535403-1-robh@kernel.org> (raw)
This series converts the mux-controller and some i2c mux bindings to DT
schema. This was a rabbit hole of trying to fix undocumented (by schema)
compatibles (enabled by setting DT_CHECKER_FLAGS=-m). So this is mux
bindings, and then a few others that are used in the mux binding
examples.
The mdio and iio mux bindings still need to be done. Patches welcome.TM
It's probably easiest if I take the whole series.
Rob
Rob Herring (6):
dt-bindings: mfd: ti,j721e-system-controller: Fix mux node errors
dt-bindings: rtc: nxp,pcf8563: Convert to DT schema
dt-bindings: mux: Convert mux controller bindings to schema
dt-bindings: i2c: Convert i2c-mux bindings to DT schema
dt-bindings: i2c: i2c-mux-pca954x: Convert to DT schema
dt-bindings: i2c: maxim,max9286: Use the i2c-mux.yaml schema
.../bindings/i2c/i2c-demux-pinctrl.txt | 2 +-
.../devicetree/bindings/i2c/i2c-mux-gpio.txt | 4 +-
.../devicetree/bindings/i2c/i2c-mux-gpmux.txt | 99 ----------
.../bindings/i2c/i2c-mux-gpmux.yaml | 124 ++++++++++++
.../bindings/i2c/i2c-mux-ltc4306.txt | 4 +-
.../bindings/i2c/i2c-mux-pca954x.txt | 74 -------
.../bindings/i2c/i2c-mux-pca954x.yaml | 106 ++++++++++
.../bindings/i2c/i2c-mux-pinctrl.txt | 4 +-
.../devicetree/bindings/i2c/i2c-mux-reg.txt | 4 +-
.../devicetree/bindings/i2c/i2c-mux.txt | 73 -------
.../devicetree/bindings/i2c/i2c-mux.yaml | 87 +++++++++
.../iio/multiplexer/io-channel-mux.txt | 2 +-
.../bindings/media/i2c/maxim,max9286.yaml | 23 +--
.../mfd/ti,j721e-system-controller.yaml | 19 +-
.../devicetree/bindings/mtd/ti,am654-hbmc.txt | 2 +-
.../devicetree/bindings/mux/adi,adg792a.txt | 2 +-
.../devicetree/bindings/mux/adi,adgs1408.txt | 2 +-
.../devicetree/bindings/mux/gpio-mux.txt | 69 -------
.../devicetree/bindings/mux/gpio-mux.yaml | 92 +++++++++
.../devicetree/bindings/mux/mux-consumer.yaml | 46 +++++
.../bindings/mux/mux-controller.txt | 157 ---------------
.../bindings/mux/mux-controller.yaml | 182 ++++++++++++++++++
.../devicetree/bindings/mux/reg-mux.txt | 129 -------------
.../devicetree/bindings/mux/reg-mux.yaml | 143 ++++++++++++++
.../bindings/net/mdio-mux-multiplexer.txt | 2 +-
.../devicetree/bindings/rtc/nxp,pcf8563.yaml | 50 +++++
.../devicetree/bindings/rtc/pcf8563.txt | 29 ---
27 files changed, 860 insertions(+), 670 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux.yaml
delete mode 100644 Documentation/devicetree/bindings/mux/gpio-mux.txt
create mode 100644 Documentation/devicetree/bindings/mux/gpio-mux.yaml
create mode 100644 Documentation/devicetree/bindings/mux/mux-consumer.yaml
delete mode 100644 Documentation/devicetree/bindings/mux/mux-controller.txt
create mode 100644 Documentation/devicetree/bindings/mux/mux-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/mux/reg-mux.txt
create mode 100644 Documentation/devicetree/bindings/mux/reg-mux.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/pcf8563.txt
--
2.27.0
next reply other threads:[~2021-05-18 23:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 23:28 Rob Herring [this message]
2021-05-18 23:28 ` [PATCH 1/6] dt-bindings: mfd: ti,j721e-system-controller: Fix mux node errors Rob Herring
2021-05-19 15:00 ` Lee Jones
2021-05-20 14:41 ` Kishon Vijay Abraham I
2021-05-20 15:19 ` Rob Herring
2021-05-18 23:28 ` [PATCH 2/6] dt-bindings: rtc: nxp,pcf8563: Convert to DT schema Rob Herring
2021-05-19 1:25 ` Laurent Pinchart
2021-05-25 21:27 ` Alexandre Belloni
2021-05-26 17:06 ` Rob Herring
2021-05-18 23:28 ` [PATCH 3/6] dt-bindings: mux: Convert mux controller bindings to schema Rob Herring
2021-05-22 10:41 ` Jonathan Cameron
2021-05-18 23:28 ` [PATCH 4/6] dt-bindings: i2c: Convert i2c-mux bindings to DT schema Rob Herring
2021-05-19 1:39 ` Laurent Pinchart
2021-05-19 1:40 ` Laurent Pinchart
2021-05-19 2:10 ` Rob Herring
2021-05-18 23:28 ` [PATCH 5/6] dt-bindings: i2c: i2c-mux-pca954x: Convert " Rob Herring
2021-05-19 1:23 ` Laurent Pinchart
2021-05-19 2:02 ` Rob Herring
2021-05-18 23:28 ` [PATCH 6/6] dt-bindings: i2c: maxim,max9286: Use the i2c-mux.yaml schema Rob Herring
2021-05-19 1:18 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210518232858.1535403-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jacopo+renesas@jmondi.org \
--cc=jic23@kernel.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=kishon@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=peda@axentia.se \
--cc=rogerq@ti.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).