From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org,
Thara Gopinath <thara.gopinath@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Herbert Xu <herbert@gondor.apana.org.au>,
"David S . Miller" <davem@davemloft.net>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Vinod Koul <vkoul@kernel.org>,
dmaengine@vger.kernel.org, linux-clk@vger.kernel.org,
linux-crypto@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, bhupesh.linux@gmail.com
Subject: [PATCH v3 00/17] Enable Qualcomm Crypto Engine on sm8250
Date: Wed, 19 May 2021 20:06:43 +0530 [thread overview]
Message-ID: <20210519143700.27392-1-bhupesh.sharma@linaro.org> (raw)
Changes since v2:
=================
- v2 can be seen here: https://lore.kernel.org/dmaengine/20210505213731.538612-1-bhupesh.sharma@linaro.org/
- Drop a couple of patches from v1, which tried to address the defered
probing of qce driver in case bam dma driver is not yet probed.
Replace it instead with a single (simpler) patch [PATCH 16/17].
- Convert bam dma and qce crypto dt-bindings to YAML.
- Addressed review comments from Thara, Bjorn, Vinod and Rob.
Changes since v1:
=================
- v1 can be seen here: https://lore.kernel.org/linux-arm-msm/20210310052503.3618486-1-bhupesh.sharma@linaro.org/
- v1 did not work well as reported earlier by Dmitry, so v2 contains the following
changes/fixes:
~ Enable the interconnect path b/w BAM DMA and main memory first
before trying to access the BAM DMA registers.
~ Enable the interconnect path b/w qce crytpo and main memory first
before trying to access the qce crypto registers.
~ Make sure to document the required and optional properties for both
BAM DMA and qce crypto drivers.
~ Add a few debug related print messages in case the qce crypto driver
passes or fails to probe.
~ Convert the qce crypto driver probe to a defered one in case the BAM DMA
or the interconnect driver(s) (needed on specific Qualcomm parts) are not
yet probed.
Qualcomm crypto engine is also available on sm8250 SoC.
It supports hardware accelerated algorithms for encryption
and authentication. It also provides support for aes, des, 3des
encryption algorithms and sha1, sha256, hmac(sha1), hmac(sha256)
authentication algorithms.
Tested the enabled crypto algorithms with cryptsetup test utilities
on sm8250-mtp and RB5 board (see [1]) and also with crypto self-tests,
including the fuzz tests (CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y).
While at it, also make a minor fix in 'sdm845.dtsi', to make
sure it confirms with the other .dtsi files which expose
crypto nodes on qcom SoCs.
Note that this series is rebased on AEAD fixes from Thara (see [2]).
This is required for all of the fuzz tests to work.
[1]. https://linux.die.net/man/8/cryptsetup
[2]. https://lore.kernel.org/linux-crypto/20210429150707.3168383-5-thara.gopinath@linaro.org/T/
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: bhupesh.linux@gmail.com
Bhupesh Sharma (14):
dt-bindings: qcom-bam: Convert binding to YAML
dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to
optional properties
dt-bindings: qcom-bam: Add 'iommus' to required properties
dt-bindings: qcom-qce: Convert bindings to yaml
dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to
optional properties
dt-bindings: qcom-qce: Add 'iommus' to required properties
arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
dt-bindings: crypto : Add new compatible strings for qcom-qce
arm64/dts: qcom: Use new compatibles for crypto nodes
crypto: qce: Add new compatibles for qce crypto driver
crypto: qce: Print a failure msg in case probe() fails
crypto: qce: Convert the device found dev_dbg() to dev_info()
crypto: qce: Defer probing if BAM dma channel is not yet initialized
arm64/dts: qcom: sm8250: Add dt entries to support crypto engine.
Thara Gopinath (3):
dma: qcom: bam_dma: Add support to initialize interconnect path
crypto: qce: core: Add support to initialize interconnect path
crypto: qce: core: Make clocks optional
.../devicetree/bindings/crypto/qcom-qce.txt | 25 ----
.../devicetree/bindings/crypto/qcom-qce.yaml | 92 +++++++++++++++
.../devicetree/bindings/dma/qcom_bam_dma.txt | 50 --------
.../devicetree/bindings/dma/qcom_bam_dma.yaml | 110 ++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 28 +++++
drivers/crypto/qce/core.c | 110 ++++++++++++------
drivers/crypto/qce/core.h | 3 +
drivers/dma/qcom/bam_dma.c | 10 ++
10 files changed, 322 insertions(+), 114 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml
delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
--
2.31.1
next reply other threads:[~2021-05-19 14:37 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 14:36 Bhupesh Sharma [this message]
2021-05-19 14:36 ` [PATCH v3 01/17] dt-bindings: qcom-bam: Convert binding to YAML Bhupesh Sharma
2021-05-21 1:43 ` Rob Herring
2021-06-04 3:27 ` Bhupesh Sharma
2021-07-29 19:34 ` Rob Herring
2021-05-21 8:08 ` Stephan Gerhold
2021-06-04 3:40 ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 02/17] dt-bindings: qcom-bam: Add 'interconnects' & 'interconnect-names' to optional properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 03/17] dt-bindings: qcom-bam: Add 'iommus' to required properties Bhupesh Sharma
2021-05-21 1:44 ` Rob Herring
2021-05-21 8:11 ` Stephan Gerhold
2021-05-19 14:36 ` [PATCH v3 04/17] dt-bindings: qcom-qce: Convert bindings to yaml Bhupesh Sharma
2021-05-21 1:45 ` Rob Herring
2021-06-04 3:41 ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 05/17] dt-bindings: qcom-qce: Add 'interconnects' and move 'clocks' to optional properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 06/17] dt-bindings: qcom-qce: Add 'iommus' to required properties Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 07/17] arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly Bhupesh Sharma
2021-05-21 1:47 ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 08/17] dt-bindings: crypto : Add new compatible strings for qcom-qce Bhupesh Sharma
2021-05-21 1:46 ` Rob Herring
2021-06-05 8:33 ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 09/17] arm64/dts: qcom: Use new compatibles for crypto nodes Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 10/17] dma: qcom: bam_dma: Add support to initialize interconnect path Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 11/17] crypto: qce: core: " Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 12/17] crypto: qce: Add new compatibles for qce crypto driver Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 13/17] crypto: qce: core: Make clocks optional Bhupesh Sharma
2021-05-21 2:11 ` Thara Gopinath
2021-06-05 8:31 ` Bhupesh Sharma
2021-05-19 14:36 ` [PATCH v3 14/17] crypto: qce: Print a failure msg in case probe() fails Bhupesh Sharma
2021-05-21 1:55 ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 15/17] crypto: qce: Convert the device found dev_dbg() to dev_info() Bhupesh Sharma
2021-05-21 1:50 ` Thara Gopinath
2021-05-19 14:36 ` [PATCH v3 16/17] crypto: qce: Defer probing if BAM dma channel is not yet initialized Bhupesh Sharma
2021-05-21 1:57 ` Thara Gopinath
2021-06-05 8:26 ` Bhupesh Sharma
2021-05-19 14:37 ` [PATCH v3 17/17] arm64/dts: qcom: sm8250: Add dt entries to support crypto engine Bhupesh Sharma
[not found] ` <162261866806.4130789.17734233133141728573@swboyd.mtv.corp.google.com>
2021-06-04 3:18 ` [PATCH v3 00/17] Enable Qualcomm Crypto Engine on sm8250 Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519143700.27392-1-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=thara.gopinath@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).