[PATCH 1/2] staging: rtl8723bs: core: rtw_mlme_ext: 'evt_seq' is only used if CHECK_EVENT_SEQ is set

[PATCH 1/2] staging: rtl8723bs: core: rtw_mlme_ext: 'evt_seq' is only used if CHECK_EVENT_SEQ is set

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c: In function ‘mlme_evt_hdl’:
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:6004:5: warning: variable ‘evt_seq’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index 9fc612fb736f8..80e5c29852b8a 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -6009,7 +6009,7 @@ static struct fwevent wlanevents[] = {
 
 u8 mlme_evt_hdl(struct adapter *padapter, unsigned char *pbuf)
 {
-	u8 evt_code, evt_seq;
+	u8 evt_code, __maybe_unused evt_seq;
 	u16 evt_sz;
 	uint	*peventbuf;
 	void (*event_callback)(struct adapter *dev, u8 *pbuf);
-- 
2.31.1

[PATCH 2/2] staging: rtl8723bs: hal: rtl8723b_hal_init: Remove unused variable and dead code

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c: In function ‘CCX_FwC2HTxRpt_8723b’:
 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:3355:5: warning: variable ‘seq_no’ set but not used [-Wunused-but-set-variable]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Cesati <marcocesati@gmail.com>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: Stanley@BB.SD3
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 33942ab587720..0270724ccef03 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -3204,14 +3204,9 @@ void CCX_FwC2HTxRpt_8723b(struct adapter *padapter, u8 *pdata, u8 len)
 
 	if (GET_8723B_C2H_TX_RPT_RETRY_OVER(pdata) | GET_8723B_C2H_TX_RPT_LIFE_TIME_OVER(pdata)) {
 		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
-	}
-/*
-	else if (seq_no != padapter->xmitpriv.seq_no) {
-		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
-	}
-*/
-	else
+	} else {
 		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_SUCCESS);
+	}
 }
 
 s32 c2h_id_filter_ccx_8723b(u8 *buf)
-- 
2.31.1

Re: [PATCH 1/2] staging: rtl8723bs: core: rtw_mlme_ext: 'evt_seq' is only used if CHECK_EVENT_SEQ is set

[Dan Carpenter]

On Thu, May 20, 2021 at 01:26:19PM +0100, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/staging/rtl8723bs/core/rtw_mlme_ext.c: In function ‘mlme_evt_hdl’:
>  drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:6004:5: warning: variable ‘evt_seq’ set but not used [-Wunused-but-set-variable]
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-staging@lists.linux.dev
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
> index 9fc612fb736f8..80e5c29852b8a 100644
> --- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
> +++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
> @@ -6009,7 +6009,7 @@ static struct fwevent wlanevents[] = {
>  
>  u8 mlme_evt_hdl(struct adapter *padapter, unsigned char *pbuf)
>  {
> -	u8 evt_code, evt_seq;
> +	u8 evt_code, __maybe_unused evt_seq;
>  	u16 evt_sz;
>  	uint	*peventbuf;
>  	void (*event_callback)(struct adapter *dev, u8 *pbuf);

#ifdef CHECK_EVENT_SEQ is dead code.  Just delete it.

regards,
dan carpenter

Re: [PATCH 2/2] staging: rtl8723bs: hal: rtl8723b_hal_init: Remove unused variable and dead code

[Dan Carpenter]

On Thu, May 20, 2021 at 01:26:20PM +0100, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c: In function ‘CCX_FwC2HTxRpt_8723b’:
>  drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:3355:5: warning: variable ‘seq_no’ set but not used [-Wunused-but-set-variable]
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Marco Cesati <marcocesati@gmail.com>
> Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
> Cc: Stanley@BB.SD3
> Cc: linux-staging@lists.linux.dev
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> index 33942ab587720..0270724ccef03 100644
> --- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> +++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
> @@ -3204,14 +3204,9 @@ void CCX_FwC2HTxRpt_8723b(struct adapter *padapter, u8 *pdata, u8 len)
>  
>  	if (GET_8723B_C2H_TX_RPT_RETRY_OVER(pdata) | GET_8723B_C2H_TX_RPT_LIFE_TIME_OVER(pdata)) {
>  		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
> -	}
> -/*
> -	else if (seq_no != padapter->xmitpriv.seq_no) {
> -		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
> -	}
> -*/
> -	else
> +	} else {
>  		rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_SUCCESS);
> +	}

The commit message was quite puzzling because "seq_no" doesn't exist.
Could you resend with a fixed commit message that says "Delete commented
out code" or whatever?

regards,
dan carpenter