linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/2] Update sd card pinconf for sc7180 DT
@ 2021-05-21 21:58 Sujit Kautkar
  2021-05-21 21:58 ` [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
  2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
  0 siblings, 2 replies; 4+ messages in thread
From: Sujit Kautkar @ 2021-05-21 21:58 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Doug Anderson, Rajendra Nayak, Sibi Sankar, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

This patch series contains change to move sdc pinconf from SoC specific
DT file to board specific DT file. It also contain change to set sdc
GPIO pin to bias-pull up

Tested sd card working on sc7180 based board

Changes in v2:
- added pull-up for IDP

Sujit Kautkar (2):
  arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

-- 
2.31.1.818.g46aad6cb9e-goog


^ permalink raw reply	[flat|nested] 4+ messages in thread
* [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  2021-05-21 21:58 [PATCH v2 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
@ 2021-05-21 21:58 ` Sujit Kautkar
  2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
  1 sibling, 0 replies; 4+ messages in thread
From: Sujit Kautkar @ 2021-05-21 21:58 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Doug Anderson, Rajendra Nayak, Sibi Sankar, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
files

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a7..07133e0af581a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -598,4 +598,106 @@ pinconf-rx {
 			bias-pull-up;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 609f0ceafd095..d128a0ed6ad3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1540,4 +1540,106 @@ pinconf {
 			drive-strength = <2>;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1fc328ba0403e..0630a9c410b58 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1872,108 +1872,6 @@ pinmux {
 					function = "lpass_ext";
 				};
 			};
-
-			sdc1_on: sdc1-on {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
-- 
2.31.1.818.g46aad6cb9e-goog


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up
  2021-05-21 21:58 [PATCH v2 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
  2021-05-21 21:58 ` [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
@ 2021-05-21 21:58 ` Sujit Kautkar
  2021-05-31 18:32   ` Bjorn Andersson
  1 sibling, 1 reply; 4+ messages in thread
From: Sujit Kautkar @ 2021-05-21 21:58 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Doug Anderson, Rajendra Nayak, Sibi Sankar, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

Trogdor board does not have external pull-up for cd-gpio. Set this pin
to internal pull-up for sleep config to avoid frequent regulator toggle
events.

This change is aligned with Qualcomm's DT change posted at:
https://patchwork.kernel.org/patch/11675347/

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v2:
- added pull-up for IDP

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 07133e0af581a..0c255edb7f3c3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -696,7 +696,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d128a0ed6ad3a..330deb4967ca2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1638,7 +1638,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
-- 
2.31.1.818.g46aad6cb9e-goog


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up
  2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
@ 2021-05-31 18:32   ` Bjorn Andersson
  0 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2021-05-31 18:32 UTC (permalink / raw)
  To: Sujit Kautkar
  Cc: Andy Gross, Rob Herring, Doug Anderson, Rajendra Nayak,
	Sibi Sankar, Mark Rutland, devicetree, linux-arm-msm,
	linux-kernel

On Fri 21 May 16:58 CDT 2021, Sujit Kautkar wrote:

> Trogdor board does not have external pull-up for cd-gpio. Set this pin

This says "Trogdor" specifically, but the diffstats says "all 7180
devices".

> to internal pull-up for sleep config to avoid frequent regulator toggle
> events.
> 
> This change is aligned with Qualcomm's DT change posted at:
> https://patchwork.kernel.org/patch/11675347/
> 

I'm sorry, but afacit this says that your v2 is Qualcomm's v2 but with
the change I asked for. If this is the case, then your patch is either
v3 or you could just mention this below the '---', as I don't see any
benefit of carrying this in the git history.

Regards,
Bjorn

> Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> Changes in v2:
> - added pull-up for IDP
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 07133e0af581a..0c255edb7f3c3 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -696,7 +696,7 @@ pinconf-data {
>  
>  		pinconf-sd-cd {
>  			pins = "gpio69";
> -			bias-disable;
> +			bias-pull-up;
>  			drive-strength = <2>;
>  		};
>  	};
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index d128a0ed6ad3a..330deb4967ca2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -1638,7 +1638,7 @@ pinconf-data {
>  
>  		pinconf-sd-cd {
>  			pins = "gpio69";
> -			bias-disable;
> +			bias-pull-up;
>  			drive-strength = <2>;
>  		};
>  	};
> -- 
> 2.31.1.818.g46aad6cb9e-goog
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-31 18:32 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-21 21:58 [PATCH v2 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-05-21 21:58 ` [PATCH v2 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
2021-05-21 21:58 ` [PATCH v2 2/2] arm64: dts: qcom: sc7180: trogdor: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-05-31 18:32   ` Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).