From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Tony Lindgren <tony@atomide.com>, <devicetree@vger.kernel.org>
Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH 1/5] ARM: dts: am335x: align GPIO hog names with dt-schema
Date: Sat, 22 May 2021 01:32:32 +0300 [thread overview]
Message-ID: <20210521223236.18324-2-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20210521223236.18324-1-grygorii.strashko@ti.com>
The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +-
arch/arm/boot/dts/am335x-boneblue.dts | 2 +-
arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 4 ++--
arch/arm/boot/dts/am335x-icev2.dts | 4 ++--
arch/arm/boot/dts/am335x-shc.dts | 8 ++++----
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad9912906..80116646a3fe 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -101,7 +101,7 @@
};
&gpio3 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4ea0f3..0afcc2ee0b63 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -436,7 +436,7 @@
};
&gpio3 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327d906a..74db0fc39397 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -101,7 +101,7 @@
};
&gpio1 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <29 GPIO_ACTIVE_HIGH>;
output-high;
@@ -118,7 +118,7 @@
/* an external pulldown on U21 pin 4. */
&gpio3 {
- bt_aud_in {
+ bt-aud-in-hog {
gpio-hog;
gpios = <16 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d065304d..5e598ac96dcc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@
};
&gpio3 {
- p4 {
+ pr1-mii-ctl-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PR1_MII_CTRL";
};
- p10 {
+ mux-mii-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa26533466..2bfe60d32783 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -140,14 +140,14 @@
};
&gpio1 {
- hmtc_rst {
+ hmtc-rst-hog {
gpio-hog;
gpios = <24 GPIO_ACTIVE_LOW>;
output-high;
line-name = "homematic_reset";
};
- hmtc_prog {
+ hmtc-prog-hog {
gpio-hog;
gpios = <27 GPIO_ACTIVE_LOW>;
output-high;
@@ -156,14 +156,14 @@
};
&gpio3 {
- zgb_rst {
+ zgb-rst-hog {
gpio-hog;
gpios = <18 GPIO_ACTIVE_LOW>;
output-low;
line-name = "zigbee_reset";
};
- zgb_boot {
+ zgb-boot-hog {
gpio-hog;
gpios = <19 GPIO_ACTIVE_HIGH>;
output-high;
--
2.17.1
next prev parent reply other threads:[~2021-05-21 22:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-21 22:32 [PATCH 0/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
2021-05-21 22:32 ` Grygorii Strashko [this message]
2021-05-21 22:32 ` [PATCH 2/5] ARM: dts: am437x: align gpio hog names with dt-schema Grygorii Strashko
2021-05-21 22:32 ` [PATCH 3/5] ARM: dts: omap3: " Grygorii Strashko
2021-05-21 22:32 ` [PATCH 4/5] ARM: dts: omap5-board-common: " Grygorii Strashko
2021-05-21 22:32 ` [PATCH 5/5] dt-bindings: gpio: omap: Convert to json-schema Grygorii Strashko
2021-05-24 16:59 ` Rob Herring
2021-05-24 22:52 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210521223236.18324-2-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=a-govindraju@ti.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=ssantosh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).