From: Maxime Ripard <maxime@cerno.tech>
To: dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>
Cc: Eric Anholt <eric@anholt.net>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Dom Cobley <dom@raspberrypi.com>,
linux-kernel@vger.kernel.org, Daniel Vetter <daniel@ffwll.ch>,
Maxime Ripard <mripard@kernel.org>
Subject: [PATCH] drm/vc4: hdmi: Rely on interrupts to handle hotplug
Date: Mon, 24 May 2021 15:20:18 +0200 [thread overview]
Message-ID: <20210524132018.264396-1-maxime@cerno.tech> (raw)
DRM currently polls for the HDMI connector status every 10s, which can
be an issue when we connect/disconnect a display quickly or the device
on the other end only issues a hotplug pulse (for example on EDID
change).
Switch the driver to rely on the internal controller logic for the
BCM2711/RPi4.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 44 ++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c27b287d2053..3988969f7410 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1510,6 +1510,46 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
}
+static irqreturn_t vc4_hdmi_hpd_irq_thread(int irq, void *priv)
+{
+ struct vc4_hdmi *vc4_hdmi = priv;
+ struct drm_device *dev = vc4_hdmi->connector.dev;
+
+ if (dev)
+ drm_kms_helper_hotplug_event(dev);
+
+ return IRQ_HANDLED;
+}
+
+static int vc4_hdmi_hotplug_init(struct vc4_hdmi *vc4_hdmi)
+{
+ struct platform_device *pdev = vc4_hdmi->pdev;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ if (vc4_hdmi->variant->external_irq_controller) {
+ ret = devm_request_threaded_irq(dev,
+ platform_get_irq_byname(pdev, "hpd-connected"),
+ NULL,
+ vc4_hdmi_hpd_irq_thread, IRQF_ONESHOT,
+ "vc4 hdmi hpd connected", vc4_hdmi);
+ if (ret)
+ return ret;
+
+ ret = devm_request_threaded_irq(dev,
+ platform_get_irq_byname(pdev, "hpd-removed"),
+ NULL,
+ vc4_hdmi_hpd_irq_thread, IRQF_ONESHOT,
+ "vc4 hdmi hpd disconnected", vc4_hdmi);
+ if (ret)
+ return ret;
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_DRM_VC4_HDMI_CEC
static irqreturn_t vc4_cec_irq_handler_rx_thread(int irq, void *priv)
{
@@ -2060,6 +2100,10 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
if (ret)
goto err_destroy_encoder;
+ ret = vc4_hdmi_hotplug_init(vc4_hdmi);
+ if (ret)
+ goto err_destroy_conn;
+
ret = vc4_hdmi_cec_init(vc4_hdmi);
if (ret)
goto err_destroy_conn;
--
2.31.1
next reply other threads:[~2021-05-24 13:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-24 13:20 Maxime Ripard [this message]
2021-06-16 10:09 ` [PATCH] drm/vc4: hdmi: Rely on interrupts to handle hotplug Dave Stevenson
2021-06-16 12:20 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210524132018.264396-1-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=daniel.vetter@intel.com \
--cc=daniel@ffwll.ch \
--cc=dave.stevenson@raspberrypi.com \
--cc=dom@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).