[PATCH 5.10 000/104] 5.10.40-rc1 review

[PATCH 5.10 000/104] 5.10.40-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.40 release.
There are 104 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.40-rc1

Joerg Roedel <jroedel@suse.de>
    x86/boot/compressed/64: Check SEV encryption in the 32-bit boot-path

Francois Gervais <fgervais@distech-controls.com>
    rtc: pcf85063: fallback to parent of_node

Christoph Hellwig <hch@lst.de>
    nvme-multipath: fix double initialization of ANA state

Jan Beulich <jbeulich@suse.com>
    x86/Xen: swap NX determination and GDT setup on BSP

Mike Rapoport <rppt@kernel.org>
    openrisc: mm/init.c: remove unused memblock_region variable in map_ram()

Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
    drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    tty: vt: always invoke vc->vc_sw->con_resize callback

Maciej W. Rozycki <macro@orcam.me.uk>
    vt: Fix character height handling with VT_RESIZEX

Maciej W. Rozycki <macro@orcam.me.uk>
    vt_ioctl: Revert VT_RESIZEX parameter handling removal

Maciej W. Rozycki <macro@orcam.me.uk>
    vgacon: Record video mode changes with VT_RESIZEX

Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
    video: hgafb: fix potential NULL pointer dereference

Tom Seewald <tseewald@gmail.com>
    qlcnic: Add null check after calling netdev_alloc_skb

Phillip Potter <phil@philpotter.co.uk>
    leds: lp5523: check return value of lp5xx_read and jump to cleanup code

Darrick J. Wong <djwong@kernel.org>
    ics932s401: fix broken handling of errors when word reading fails

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    net: rtlwifi: properly check for alloc_workqueue() failure

Phillip Potter <phil@philpotter.co.uk>
    scsi: ufs: handle cleanup correctly on devm_reset_control_get error

Anirudh Rayabharam <mail@anirudhrb.com>
    net: stmicro: handle clk_prepare() failure during init

Du Cheng <ducheng2@gmail.com>
    ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "niu: fix missing checks of niu_pci_eeprom_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "qlcnic: Avoid potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rtlwifi: fix a potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "media: rcar_drif: fix a memory disclosure"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    cdrom: gdrom: initialize global variable at init time

Atul Gopinathan <atulgopinathan@gmail.com>
    cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "gdrom: fix a memory leak bug"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "scsi: ufs: fix a missing check of devm_reset_control_get"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ecryptfs: replace BUG_ON with error handling code"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: imsttfb: fix potential NULL pointer dereferences"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "net: stmicro: fix a missing check of clk_prepare"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: hgafb: fix potential NULL pointer dereference"

Arnd Bergmann <arnd@arndb.de>
    kcsan: Fix debugfs initcall return type

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix crash with transient storage and zero chunk size

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix a crash when an origin has no snapshots

Varad Gautam <varad.gautam@suse.com>
    ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry

Jan Beulich <jbeulich@suse.com>
    xen-pciback: reconfigure also from backend watch handler

Jan Beulich <jbeulich@suse.com>
    xen-pciback: redo VF placement in the virtual topology

Daniel Beer <dlbeer@gmail.com>
    mmc: sdhci-pci-gli: increase 1.8V regulator wait

Nicholas Piggin <npiggin@gmail.com>
    powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls

Nicholas Piggin <npiggin@gmail.com>
    powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls

Guchun Chen <guchun.chen@amd.com>
    drm/amdgpu: update sdma golden setting for Navi12

Guchun Chen <guchun.chen@amd.com>
    drm/amdgpu: update gc golden setting for Navi12

Changfeng <Changfeng.Zhu@amd.com>
    drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang

Yi Li <liyi@loongson.cn>
    drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE

Joerg Roedel <jroedel@suse.de>
    x86/sev-es: Forward page-faults which happen during emulation

Joerg Roedel <jroedel@suse.de>
    x86/sev-es: Use __put_user()/__get_user() for data accesses

Joerg Roedel <jroedel@suse.de>
    x86/sev-es: Don't return NULL from sev_es_get_ghcb()

Tom Lendacky <thomas.lendacky@amd.com>
    x86/sev-es: Invalidate the GHCB after completing VMGEXIT

Tom Lendacky <thomas.lendacky@amd.com>
    x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix possible use-after-completion

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"

Anirudh Rayabharam <mail@anirudhrb.com>
    rapidio: handle create_workqueue() failure

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    uio_hv_generic: Fix a memory leak in error handling paths

Elia Devito <eliadevito@gmail.com>
    ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Add fixup for HP OMEN laptop

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA

PeiSen Hou <pshou@realtek.com>
    ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/realtek: reset eapd coeff to default value for alc287

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix check for the size of isochronous packet payload

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ALSA: sb8: add a check for request_region"

Daniel Cordova A <danesc87@gmail.com>
    ALSA: hda: fixup headset for ASUS GU502 laptop

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Validate MS endpoint descriptors

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix calculation for size of IR context payload

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26

Takashi Iwai <tiwai@suse.de>
    ALSA: line6: Fix racy initialization of LINE6 MIDI

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field

Takashi Iwai <tiwai@suse.de>
    ALSA: intel8x0: Don't update period unless prepared

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency

Hsin-Yi Wang <hsinyi@chromium.org>
    misc: eeprom: at24: check suspend status before disable regulator

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix memory leak in smb2_copychunk_range

Josef Bacik <josef@toxicpanda.com>
    btrfs: avoid RCU stalls while running delayed iputs

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc: Fix early setup to make early_ioremap() work

Zqiang <qiang.zhang@windriver.com>
    locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal

Leo Yan <leo.yan@linaro.org>
    locking/lockdep: Correct calling tracepoints

Like Xu <like.xu@linux.intel.com>
    perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Daniel Wagner <dwagner@suse.de>
    nvmet: seset ns->file when open fails

Oleg Nesterov <oleg@redhat.com>
    ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

Nicholas Piggin <npiggin@gmail.com>
    powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks

Yang Yingliang <yangyingliang@huawei.com>
    tools/testing/selftests/exec: fix link error

Dan Carpenter <dan.carpenter@oracle.com>
    RDMA/uverbs: Fix a NULL vs IS_ERR() bug

Maor Gottlieb <maorg@nvidia.com>
    RDMA/mlx5: Fix query DCT via DEVX

Hans de Goede <hdegoede@redhat.com>
    platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios

Hans de Goede <hdegoede@redhat.com>
    platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle

Liming Sun <limings@nvidia.com>
    platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue

James Smart <jsmart2021@gmail.com>
    nvme-fc: clear q_live at beginning of association teardown

Keith Busch <kbusch@kernel.org>
    nvme-tcp: rerun io_work if req_list is not empty

Wu Bo <wubo40@huawei.com>
    nvme-loop: fix memory leak in nvme_loop_create_ctrl()

Wu Bo <wubo40@huawei.com>
    nvmet: fix memory leak in nvmet_alloc_ctrl()

Amit <amit.engel@dell.com>
    nvmet: remove unused ctrl->cqs

Shay Drory <shayd@nvidia.com>
    RDMA/core: Don't access cm_id after its destruction

Maor Gottlieb <maorg@nvidia.com>
    RDMA/mlx5: Recover from fatal event in dual port mode

Zhen Lei <thunder.leizhen@huawei.com>
    scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

Javed Hasan <jhasan@marvell.com>
    scsi: qedf: Add pointer checks in qedf_update_link_speed()

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: core: Increase the usable queue depth

Leon Romanovsky <leon@kernel.org>
    RDMA/rxe: Clear all QP fields if creation failed

Leon Romanovsky <leon@kernel.org>
    RDMA/core: Prevent divide-by-zero error triggered by the user

Leon Romanovsky <leon@kernel.org>
    RDMA/siw: Release xarray entry

Leon Romanovsky <leon@kernel.org>
    RDMA/siw: Properly check send and receive CQ pointers

Rijo Thomas <Rijo-john.Thomas@amd.com>
    tee: amdtee: unload TA only when its refcount becomes 0

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    openrisc: Fix a memory leak

Dan Carpenter <dan.carpenter@oracle.com>
    firmware: arm_scpi: Prevent the ternary sign expansion bug


-------------

Diffstat:

 Documentation/powerpc/syscall64-abi.rst            |  10 ++
 Makefile                                           |   4 +-
 arch/openrisc/kernel/setup.c                       |   2 +
 arch/openrisc/mm/init.c                            |   3 +-
 arch/powerpc/include/asm/hvcall.h                  |   3 +
 arch/powerpc/include/asm/paravirt.h                |  22 +++-
 arch/powerpc/include/asm/ptrace.h                  |  45 ++++---
 arch/powerpc/include/asm/syscall.h                 |  42 ++++---
 arch/powerpc/kernel/setup_64.c                     |   4 +-
 arch/powerpc/platforms/pseries/hvCall.S            |  10 ++
 arch/powerpc/platforms/pseries/lpar.c              |   3 +-
 arch/x86/boot/compressed/head_64.S                 |  85 +++++++++++++
 arch/x86/events/intel/core.c                       |   2 +-
 arch/x86/kernel/sev-es-shared.c                    |   1 +
 arch/x86/kernel/sev-es.c                           | 136 +++++++++++++--------
 arch/x86/xen/enlighten_pv.c                        |   8 +-
 drivers/cdrom/gdrom.c                              |  13 +-
 drivers/firmware/arm_scpi.c                        |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c            |   2 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |   6 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  10 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |   4 +
 drivers/gpu/drm/amd/amdgpu/soc15.c                 |   2 -
 drivers/gpu/drm/i915/gt/gen7_renderclear.c         |   5 +-
 drivers/hwmon/lm80.c                               |  11 +-
 drivers/infiniband/core/cma.c                      |   5 +-
 drivers/infiniband/core/uverbs_std_types_device.c  |   7 +-
 drivers/infiniband/hw/mlx5/devx.c                  |   6 +-
 drivers/infiniband/hw/mlx5/main.c                  |   1 +
 drivers/infiniband/sw/rxe/rxe_qp.c                 |   7 ++
 drivers/infiniband/sw/siw/siw_verbs.c              |  11 +-
 drivers/leds/leds-lp5523.c                         |   2 +-
 drivers/md/dm-snap.c                               |   6 +-
 drivers/media/platform/rcar_drif.c                 |   1 -
 drivers/misc/eeprom/at24.c                         |   6 +-
 drivers/misc/ics932s401.c                          |   2 +-
 drivers/mmc/host/sdhci-pci-gli.c                   |   7 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |   3 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |   8 +-
 drivers/net/ethernet/sun/niu.c                     |  32 +++--
 drivers/net/wireless/realtek/rtlwifi/base.c        |  18 +--
 drivers/nvme/host/core.c                           |   3 +-
 drivers/nvme/host/fc.c                             |  12 ++
 drivers/nvme/host/multipath.c                      |  55 +++++----
 drivers/nvme/host/nvme.h                           |   8 +-
 drivers/nvme/host/tcp.c                            |   5 +-
 drivers/nvme/target/core.c                         |  15 +--
 drivers/nvme/target/io-cmd-file.c                  |   8 +-
 drivers/nvme/target/loop.c                         |   4 +-
 drivers/nvme/target/nvmet.h                        |   1 -
 drivers/platform/mellanox/mlxbf-tmfifo.c           |  11 +-
 drivers/platform/x86/Kconfig                       |   2 +-
 drivers/platform/x86/dell-smbios-wmi.c             |   3 +-
 drivers/platform/x86/intel_int0002_vgpio.c         |  80 ++++++++----
 drivers/rapidio/rio_cm.c                           |  17 ++-
 drivers/rtc/rtc-pcf85063.c                         |   7 +-
 drivers/scsi/qedf/qedf_main.c                      |   4 +-
 drivers/scsi/qla2xxx/qla_nx.c                      |   3 +-
 drivers/scsi/ufs/ufs-hisi.c                        |  15 ++-
 drivers/scsi/ufs/ufshcd.c                          |   5 +-
 drivers/tee/amdtee/amdtee_private.h                |  13 ++
 drivers/tee/amdtee/call.c                          |  94 ++++++++++++--
 drivers/tee/amdtee/core.c                          |  15 ++-
 drivers/tty/serial/mvebu-uart.c                    |   3 -
 drivers/tty/vt/vt.c                                |   2 +-
 drivers/tty/vt/vt_ioctl.c                          |  57 +++++++--
 drivers/uio/uio_hv_generic.c                       |   8 +-
 drivers/video/console/vgacon.c                     |  56 +++++----
 drivers/video/fbdev/core/fbcon.c                   |   2 +-
 drivers/video/fbdev/hgafb.c                        |  21 ++--
 drivers/video/fbdev/imsttfb.c                      |   5 -
 drivers/xen/xen-pciback/vpci.c                     |  14 ++-
 drivers/xen/xen-pciback/xenbus.c                   |  22 +++-
 fs/btrfs/inode.c                                   |   1 +
 fs/cifs/smb2ops.c                                  |   2 +
 fs/ecryptfs/crypto.c                               |   6 +-
 include/linux/console_struct.h                     |   1 +
 ipc/mqueue.c                                       |   6 +-
 ipc/msg.c                                          |   6 +-
 ipc/sem.c                                          |   6 +-
 kernel/kcsan/debugfs.c                             |   3 +-
 kernel/locking/lockdep.c                           |   4 +-
 kernel/locking/mutex-debug.c                       |   4 +-
 kernel/locking/mutex-debug.h                       |   2 +-
 kernel/locking/mutex.c                             |  18 ++-
 kernel/locking/mutex.h                             |   4 +-
 kernel/ptrace.c                                    |  18 ++-
 sound/firewire/Kconfig                             |   4 +-
 sound/firewire/amdtp-stream-trace.h                |   6 +-
 sound/firewire/amdtp-stream.c                      |  42 ++++---
 sound/firewire/bebob/bebob.c                       |   2 +-
 sound/firewire/dice/dice-alesis.c                  |   2 +-
 sound/firewire/dice/dice-tcelectronic.c            |   4 +-
 sound/firewire/oxfw/oxfw.c                         |   1 -
 sound/isa/sb/sb8.c                                 |   4 -
 sound/pci/hda/patch_realtek.c                      | 135 +++++++++++++++++++-
 sound/pci/intel8x0.c                               |   7 ++
 sound/usb/line6/driver.c                           |   4 +
 sound/usb/line6/pod.c                              |   5 -
 sound/usb/line6/variax.c                           |   6 -
 sound/usb/midi.c                                   |   4 +
 tools/testing/selftests/exec/Makefile              |   6 +-
 tools/testing/selftests/seccomp/seccomp_bpf.c      |  27 ++--
 103 files changed, 1035 insertions(+), 434 deletions(-)

[PATCH 5.10 001/104] firmware: arm_scpi: Prevent the ternary sign expansion bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d9cd78edb2e6b7e26747c0ec312be31e7ef196fe ]

How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long.  But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.

Fix this by getting rid of the ternary.

Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda
Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scpi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index d0dee37ad522..4ceba5ef7895 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -552,8 +552,10 @@ static unsigned long scpi_clk_get_val(u16 clk_id)
 
 	ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id,
 				sizeof(le_clk_id), &rate, sizeof(rate));
+	if (ret)
+		return 0;
 
-	return ret ? ret : le32_to_cpu(rate);
+	return le32_to_cpu(rate);
 }
 
 static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
-- 
2.30.2

[PATCH 5.10 002/104] openrisc: Fix a memory leak

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index 2416a9f91533..c6f9e7b9f7cb 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -278,6 +278,8 @@ void calibrate_delay(void)
 	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 		loops_per_jiffy / (500000 / HZ),
 		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+	of_node_put(cpu);
 }
 
 void __init setup_arch(char **cmdline_p)
-- 
2.30.2

[PATCH 5.10 003/104] tee: amdtee: unload TA only when its refcount becomes 0

[Greg Kroah-Hartman]

From: Rijo Thomas <Rijo-john.Thomas@amd.com>

[ Upstream commit 9f015b3765bf593b3ed5d3b588e409dc0ffa9f85 ]

Same Trusted Application (TA) can be loaded in multiple TEE contexts.

If it is a single instance TA, the TA should not get unloaded from AMD
Secure Processor, while it is still in use in another TEE context.

Therefore reference count TA and unload it when the count becomes zero.

Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tee/amdtee/amdtee_private.h | 13 ++++
 drivers/tee/amdtee/call.c           | 94 ++++++++++++++++++++++++++---
 drivers/tee/amdtee/core.c           | 15 +++--
 3 files changed, 106 insertions(+), 16 deletions(-)

diff --git a/drivers/tee/amdtee/amdtee_private.h b/drivers/tee/amdtee/amdtee_private.h
index 337c8d82f74e..6d0f7062bb87 100644
--- a/drivers/tee/amdtee/amdtee_private.h
+++ b/drivers/tee/amdtee/amdtee_private.h
@@ -21,6 +21,7 @@
 #define TEEC_SUCCESS			0x00000000
 #define TEEC_ERROR_GENERIC		0xFFFF0000
 #define TEEC_ERROR_BAD_PARAMETERS	0xFFFF0006
+#define TEEC_ERROR_OUT_OF_MEMORY	0xFFFF000C
 #define TEEC_ERROR_COMMUNICATION	0xFFFF000E
 
 #define TEEC_ORIGIN_COMMS		0x00000002
@@ -93,6 +94,18 @@ struct amdtee_shm_data {
 	u32     buf_id;
 };
 
+/**
+ * struct amdtee_ta_data - Keeps track of all TAs loaded in AMD Secure
+ *			   Processor
+ * @ta_handle:	Handle to TA loaded in TEE
+ * @refcount:	Reference count for the loaded TA
+ */
+struct amdtee_ta_data {
+	struct list_head list_node;
+	u32 ta_handle;
+	u32 refcount;
+};
+
 #define LOWER_TWO_BYTE_MASK	0x0000FFFF
 
 /**
diff --git a/drivers/tee/amdtee/call.c b/drivers/tee/amdtee/call.c
index 096dd4d92d39..07f36ac834c8 100644
--- a/drivers/tee/amdtee/call.c
+++ b/drivers/tee/amdtee/call.c
@@ -121,15 +121,69 @@ static int amd_params_to_tee_params(struct tee_param *tee, u32 count,
 	return ret;
 }
 
+static DEFINE_MUTEX(ta_refcount_mutex);
+static struct list_head ta_list = LIST_HEAD_INIT(ta_list);
+
+static u32 get_ta_refcount(u32 ta_handle)
+{
+	struct amdtee_ta_data *ta_data;
+	u32 count = 0;
+
+	/* Caller must hold a mutex */
+	list_for_each_entry(ta_data, &ta_list, list_node)
+		if (ta_data->ta_handle == ta_handle)
+			return ++ta_data->refcount;
+
+	ta_data = kzalloc(sizeof(*ta_data), GFP_KERNEL);
+	if (ta_data) {
+		ta_data->ta_handle = ta_handle;
+		ta_data->refcount = 1;
+		count = ta_data->refcount;
+		list_add(&ta_data->list_node, &ta_list);
+	}
+
+	return count;
+}
+
+static u32 put_ta_refcount(u32 ta_handle)
+{
+	struct amdtee_ta_data *ta_data;
+	u32 count = 0;
+
+	/* Caller must hold a mutex */
+	list_for_each_entry(ta_data, &ta_list, list_node)
+		if (ta_data->ta_handle == ta_handle) {
+			count = --ta_data->refcount;
+			if (count == 0) {
+				list_del(&ta_data->list_node);
+				kfree(ta_data);
+				break;
+			}
+		}
+
+	return count;
+}
+
 int handle_unload_ta(u32 ta_handle)
 {
 	struct tee_cmd_unload_ta cmd = {0};
-	u32 status;
+	u32 status, count;
 	int ret;
 
 	if (!ta_handle)
 		return -EINVAL;
 
+	mutex_lock(&ta_refcount_mutex);
+
+	count = put_ta_refcount(ta_handle);
+
+	if (count) {
+		pr_debug("unload ta: not unloading %u count %u\n",
+			 ta_handle, count);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
 	cmd.ta_handle = ta_handle;
 
 	ret = psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA, (void *)&cmd,
@@ -137,8 +191,12 @@ int handle_unload_ta(u32 ta_handle)
 	if (!ret && status != 0) {
 		pr_err("unload ta: status = 0x%x\n", status);
 		ret = -EBUSY;
+	} else {
+		pr_debug("unloaded ta handle %u\n", ta_handle);
 	}
 
+unlock:
+	mutex_unlock(&ta_refcount_mutex);
 	return ret;
 }
 
@@ -340,7 +398,8 @@ int handle_open_session(struct tee_ioctl_open_session_arg *arg, u32 *info,
 
 int handle_load_ta(void *data, u32 size, struct tee_ioctl_open_session_arg *arg)
 {
-	struct tee_cmd_load_ta cmd = {0};
+	struct tee_cmd_unload_ta unload_cmd = {};
+	struct tee_cmd_load_ta load_cmd = {};
 	phys_addr_t blob;
 	int ret;
 
@@ -353,21 +412,36 @@ int handle_load_ta(void *data, u32 size, struct tee_ioctl_open_session_arg *arg)
 		return -EINVAL;
 	}
 
-	cmd.hi_addr = upper_32_bits(blob);
-	cmd.low_addr = lower_32_bits(blob);
-	cmd.size = size;
+	load_cmd.hi_addr = upper_32_bits(blob);
+	load_cmd.low_addr = lower_32_bits(blob);
+	load_cmd.size = size;
 
-	ret = psp_tee_process_cmd(TEE_CMD_ID_LOAD_TA, (void *)&cmd,
-				  sizeof(cmd), &arg->ret);
+	mutex_lock(&ta_refcount_mutex);
+
+	ret = psp_tee_process_cmd(TEE_CMD_ID_LOAD_TA, (void *)&load_cmd,
+				  sizeof(load_cmd), &arg->ret);
 	if (ret) {
 		arg->ret_origin = TEEC_ORIGIN_COMMS;
 		arg->ret = TEEC_ERROR_COMMUNICATION;
-	} else {
-		set_session_id(cmd.ta_handle, 0, &arg->session);
+	} else if (arg->ret == TEEC_SUCCESS) {
+		ret = get_ta_refcount(load_cmd.ta_handle);
+		if (!ret) {
+			arg->ret_origin = TEEC_ORIGIN_COMMS;
+			arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+
+			/* Unload the TA on error */
+			unload_cmd.ta_handle = load_cmd.ta_handle;
+			psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA,
+					    (void *)&unload_cmd,
+					    sizeof(unload_cmd), &ret);
+		} else {
+			set_session_id(load_cmd.ta_handle, 0, &arg->session);
+		}
 	}
+	mutex_unlock(&ta_refcount_mutex);
 
 	pr_debug("load TA: TA handle = 0x%x, RO = 0x%x, ret = 0x%x\n",
-		 cmd.ta_handle, arg->ret_origin, arg->ret);
+		 load_cmd.ta_handle, arg->ret_origin, arg->ret);
 
 	return 0;
 }
diff --git a/drivers/tee/amdtee/core.c b/drivers/tee/amdtee/core.c
index 8a6a8f30bb42..da6b88e80dc0 100644
--- a/drivers/tee/amdtee/core.c
+++ b/drivers/tee/amdtee/core.c
@@ -59,10 +59,9 @@ static void release_session(struct amdtee_session *sess)
 			continue;
 
 		handle_close_session(sess->ta_handle, sess->session_info[i]);
+		handle_unload_ta(sess->ta_handle);
 	}
 
-	/* Unload Trusted Application once all sessions are closed */
-	handle_unload_ta(sess->ta_handle);
 	kfree(sess);
 }
 
@@ -224,8 +223,6 @@ static void destroy_session(struct kref *ref)
 	struct amdtee_session *sess = container_of(ref, struct amdtee_session,
 						   refcount);
 
-	/* Unload the TA from TEE */
-	handle_unload_ta(sess->ta_handle);
 	mutex_lock(&session_list_mutex);
 	list_del(&sess->list_node);
 	mutex_unlock(&session_list_mutex);
@@ -238,7 +235,7 @@ int amdtee_open_session(struct tee_context *ctx,
 {
 	struct amdtee_context_data *ctxdata = ctx->data;
 	struct amdtee_session *sess = NULL;
-	u32 session_info;
+	u32 session_info, ta_handle;
 	size_t ta_size;
 	int rc, i;
 	void *ta;
@@ -259,11 +256,14 @@ int amdtee_open_session(struct tee_context *ctx,
 	if (arg->ret != TEEC_SUCCESS)
 		goto out;
 
+	ta_handle = get_ta_handle(arg->session);
+
 	mutex_lock(&session_list_mutex);
 	sess = alloc_session(ctxdata, arg->session);
 	mutex_unlock(&session_list_mutex);
 
 	if (!sess) {
+		handle_unload_ta(ta_handle);
 		rc = -ENOMEM;
 		goto out;
 	}
@@ -277,6 +277,7 @@ int amdtee_open_session(struct tee_context *ctx,
 
 	if (i >= TEE_NUM_SESSIONS) {
 		pr_err("reached maximum session count %d\n", TEE_NUM_SESSIONS);
+		handle_unload_ta(ta_handle);
 		kref_put(&sess->refcount, destroy_session);
 		rc = -ENOMEM;
 		goto out;
@@ -289,12 +290,13 @@ int amdtee_open_session(struct tee_context *ctx,
 		spin_lock(&sess->lock);
 		clear_bit(i, sess->sess_mask);
 		spin_unlock(&sess->lock);
+		handle_unload_ta(ta_handle);
 		kref_put(&sess->refcount, destroy_session);
 		goto out;
 	}
 
 	sess->session_info[i] = session_info;
-	set_session_id(sess->ta_handle, i, &arg->session);
+	set_session_id(ta_handle, i, &arg->session);
 out:
 	free_pages((u64)ta, get_order(ta_size));
 	return rc;
@@ -329,6 +331,7 @@ int amdtee_close_session(struct tee_context *ctx, u32 session)
 
 	/* Close the session */
 	handle_close_session(ta_handle, session_info);
+	handle_unload_ta(ta_handle);
 
 	kref_put(&sess->refcount, destroy_session);
 
-- 
2.30.2

[PATCH 5.10 004/104] RDMA/siw: Properly check send and receive CQ pointers

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit a568814a55a0e82bbc7c7b51333d0c38e8fb5520 ]

The check for the NULL of pointer received from container_of() is
incorrect by definition as it points to some offset from NULL.

Change such check with proper NULL check of SIW QP attributes.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/a7535a82925f6f4c1f062abaa294f3ae6e54bdd2.1620560310.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index fb25e8011f5a..11bd3205dbc6 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -300,7 +300,6 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 	struct siw_ucontext *uctx =
 		rdma_udata_to_drv_context(udata, struct siw_ucontext,
 					  base_ucontext);
-	struct siw_cq *scq = NULL, *rcq = NULL;
 	unsigned long flags;
 	int num_sqe, num_rqe, rv = 0;
 	size_t length;
@@ -340,10 +339,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 		rv = -EINVAL;
 		goto err_out;
 	}
-	scq = to_siw_cq(attrs->send_cq);
-	rcq = to_siw_cq(attrs->recv_cq);
 
-	if (!scq || (!rcq && !attrs->srq)) {
+	if (!attrs->send_cq || (!attrs->recv_cq && !attrs->srq)) {
 		siw_dbg(base_dev, "send CQ or receive CQ invalid\n");
 		rv = -EINVAL;
 		goto err_out;
@@ -398,8 +395,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 		}
 	}
 	qp->pd = pd;
-	qp->scq = scq;
-	qp->rcq = rcq;
+	qp->scq = to_siw_cq(attrs->send_cq);
+	qp->rcq = to_siw_cq(attrs->recv_cq);
 
 	if (attrs->srq) {
 		/*
-- 
2.30.2

[PATCH 5.10 005/104] RDMA/siw: Release xarray entry

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit a3d83276d98886879b5bf7b30b7c29882754e4df ]

The xarray entry is allocated in siw_qp_add(), but release was
missed in case zero-sized SQ was discovered.

Fixes: 661f385961f0 ("RDMA/siw: Fix handling of zero-sized Read and Receive Queues.")
Link: https://lore.kernel.org/r/f070b59d5a1114d5a4e830346755c2b3f141cde5.1620560472.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index 11bd3205dbc6..34e847a91eb8 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -372,7 +372,7 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 	else {
 		/* Zero sized SQ is not supported */
 		rv = -EINVAL;
-		goto err_out;
+		goto err_out_xa;
 	}
 	if (num_rqe)
 		num_rqe = roundup_pow_of_two(num_rqe);
-- 
2.30.2

[PATCH 5.10 006/104] RDMA/core: Prevent divide-by-zero error triggered by the user

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 54d87913f147a983589923c7f651f97de9af5be1 ]

The user_entry_size is supplied by the user and later used as a
denominator to calculate number of entries. The zero supplied by the user
will trigger the following divide-by-zero error:

 divide error: 0000 [#1] SMP KASAN PTI
 CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510
 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b
 RSP: 0018:ffff88810416f828 EFLAGS: 00010246
 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d
 RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000
 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f
 R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0
 FS:  00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0
  ib_uverbs_cmd_verbs+0x1546/0x1940
  ib_uverbs_ioctl+0x186/0x240
  __x64_sys_ioctl+0x38a/0x1220
  do_syscall_64+0x3f/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/uverbs_std_types_device.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/core/uverbs_std_types_device.c b/drivers/infiniband/core/uverbs_std_types_device.c
index 9ec6971056fa..a03021d94e11 100644
--- a/drivers/infiniband/core/uverbs_std_types_device.c
+++ b/drivers/infiniband/core/uverbs_std_types_device.c
@@ -331,6 +331,9 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QUERY_GID_TABLE)(
 	if (ret)
 		return ret;
 
+	if (!user_entry_size)
+		return -EINVAL;
+
 	max_entries = uverbs_attr_ptr_get_array_size(
 		attrs, UVERBS_ATTR_QUERY_GID_TABLE_RESP_ENTRIES,
 		user_entry_size);
-- 
2.30.2

[PATCH 5.10 007/104] RDMA/rxe: Clear all QP fields if creation failed

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 67f29896fdc83298eed5a6576ff8f9873f709228 ]

rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Modules linked in:
  CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55
  RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800
  R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000
  FS:  00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   __refcount_sub_and_test include/linux/refcount.h:283 [inline]
   __refcount_dec_and_test include/linux/refcount.h:315 [inline]
   refcount_dec_and_test include/linux/refcount.h:333 [inline]
   kref_put include/linux/kref.h:64 [inline]
   rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805
   execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327
   rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391
   kref_put include/linux/kref.h:65 [inline]
   rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425
   _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline]
   ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231
   ib_create_qp include/rdma/ib_verbs.h:3644 [inline]
   create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920
   ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline]
   ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092
   add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717
   enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331
   ib_register_device drivers/infiniband/core/device.c:1413 [inline]
   ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365
   rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147
   rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
   rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503
   rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
   rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
   nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555
   rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195
   rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
   rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259
   netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
   netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
   netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
   sock_sendmsg_nosec net/socket.c:654 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:674
   ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
   ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
   __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
   do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.1620717918.git.leonro@nvidia.com
Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index 656a5b4be847..1e716fe7014c 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -231,6 +231,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp,
 	if (err) {
 		vfree(qp->sq.queue->buf);
 		kfree(qp->sq.queue);
+		qp->sq.queue = NULL;
 		return err;
 	}
 
@@ -284,6 +285,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp,
 		if (err) {
 			vfree(qp->rq.queue->buf);
 			kfree(qp->rq.queue);
+			qp->rq.queue = NULL;
 			return err;
 		}
 	}
@@ -344,6 +346,11 @@ int rxe_qp_from_init(struct rxe_dev *rxe, struct rxe_qp *qp, struct rxe_pd *pd,
 err2:
 	rxe_queue_cleanup(qp->sq.queue);
 err1:
+	qp->pd = NULL;
+	qp->rcq = NULL;
+	qp->scq = NULL;
+	qp->srq = NULL;
+
 	if (srq)
 		rxe_drop_ref(srq);
 	rxe_drop_ref(scq);
-- 
2.30.2

[PATCH 5.10 008/104] scsi: ufs: core: Increase the usable queue depth

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit d0b2b70eb12e9ffaf95e11b16b230a4e015a536c ]

With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.

The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.

Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.

In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().

Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org
Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 08d4d40c510e..854c96e63007 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2768,7 +2768,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
  * ufshcd_exec_dev_cmd - API for sending device management requests
  * @hba: UFS hba
  * @cmd_type: specifies the type (NOP, Query...)
- * @timeout: time in seconds
+ * @timeout: timeout in milliseconds
  *
  * NOTE: Since there is only one available tag for device management commands,
  * it is expected you hold the hba->dev_cmd.lock mutex.
@@ -2798,6 +2798,9 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	}
 	tag = req->tag;
 	WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
+	/* Set the timeout such that the SCSI error handler is not activated. */
+	req->timeout = msecs_to_jiffies(2 * timeout);
+	blk_mq_start_request(req);
 
 	init_completion(&wait);
 	lrbp = &hba->lrb[tag];
-- 
2.30.2

[PATCH 5.10 009/104] scsi: qedf: Add pointer checks in qedf_update_link_speed()

[Greg Kroah-Hartman]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit 73578af92a0fae6609b955fcc9113e50e413c80f ]

The following trace was observed:

 [   14.042059] Call Trace:
 [   14.042061]  <IRQ>
 [   14.042068]  qedf_link_update+0x144/0x1f0 [qedf]
 [   14.042117]  qed_link_update+0x5c/0x80 [qed]
 [   14.042135]  qed_mcp_handle_link_change+0x2d2/0x410 [qed]
 [   14.042155]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042170]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042186]  ? qed_rd+0x13/0x40 [qed]
 [   14.042205]  qed_mcp_handle_events+0x437/0x690 [qed]
 [   14.042221]  ? qed_set_ptt+0x70/0x80 [qed]
 [   14.042239]  qed_int_sp_dpc+0x3a6/0x3e0 [qed]
 [   14.042245]  tasklet_action_common.isra.14+0x5a/0x100
 [   14.042250]  __do_softirq+0xe4/0x2f8
 [   14.042253]  irq_exit+0xf7/0x100
 [   14.042255]  do_IRQ+0x7f/0xd0
 [   14.042257]  common_interrupt+0xf/0xf
 [   14.042259]  </IRQ>

API qedf_link_update() is getting called from QED but by that time
shost_data is not initialised. This results in a NULL pointer dereference
when we try to dereference shost_data while updating supported_speeds.

Add a NULL pointer check before dereferencing shost_data.

Link: https://lore.kernel.org/r/20210512072533.23618-1-jhasan@marvell.com
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 46d185cb9ea8..a464d0a4f465 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -536,7 +536,9 @@ static void qedf_update_link_speed(struct qedf_ctx *qedf,
 	if (linkmode_intersects(link->supported_caps, sup_caps))
 		lport->link_supported_speeds |= FC_PORTSPEED_20GBIT;
 
-	fc_host_supported_speeds(lport->host) = lport->link_supported_speeds;
+	if (lport->host && lport->host->shost_data)
+		fc_host_supported_speeds(lport->host) =
+			lport->link_supported_speeds;
 }
 
 static void qedf_bw_update(void *dev)
-- 
2.30.2

[PATCH 5.10 010/104] scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ]

Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com
Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_nx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index b3ba0de5d4fb..0563c9530dca 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1066,7 +1066,8 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
 		return ret;
 	}
 
-	if (qla82xx_flash_set_write_enable(ha))
+	ret = qla82xx_flash_set_write_enable(ha);
+	if (ret < 0)
 		goto done_write;
 
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data);
-- 
2.30.2

[PATCH 5.10 011/104] RDMA/mlx5: Recover from fatal event in dual port mode

[Greg Kroah-Hartman]

From: Maor Gottlieb <maorg@nvidia.com>

[ Upstream commit 97f30d324ce6645a4de4ffb71e4ae9b8ca36ff04 ]

When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.

Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue")
Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index beec0d7c0d6e..b19506707e45 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -4762,6 +4762,7 @@ static void *mlx5_ib_add_slave_port(struct mlx5_core_dev *mdev)
 
 		if (bound) {
 			rdma_roce_rescan_device(&dev->ib_dev);
+			mpi->ibdev->ib_active = true;
 			break;
 		}
 	}
-- 
2.30.2

[PATCH 5.10 012/104] RDMA/core: Dont access cm_id after its destruction

[Greg Kroah-Hartman]

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit 889d916b6f8a48b8c9489fffcad3b78eedd01a51 ]

restrack should only be attached to a cm_id while the ID has a valid
device pointer. It is set up when the device is first loaded, but not
cleared when the device is removed. There is also two copies of the device
pointer, one private and one in the public API, and these were left out of
sync.

Make everything go to NULL together and manipulate restrack right around
the device assignments.

Found by syzcaller:
BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline]
BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline]
BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
Write of size 8 at addr dead000000000108 by task syz-executor716/334

CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0xbe/0xf9 lib/dump_stack.c:120
 __kasan_report mm/kasan/report.c:400 [inline]
 kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413
 __list_del include/linux/list.h:112 [inline]
 __list_del_entry include/linux/list.h:135 [inline]
 list_del include/linux/list.h:146 [inline]
 cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
 cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
 cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
 _destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862
 ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185
 ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576
 ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797
 __fput+0x169/0x540 fs/file_table.c:280
 task_work_run+0xb7/0x100 kernel/task_work.c:140
 exit_task_work include/linux/task_work.h:30 [inline]
 do_exit+0x7da/0x17f0 kernel/exit.c:825
 do_group_exit+0x9e/0x190 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931
 do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 255d0c14b375 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count")
Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.1620711734.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 6af066a2c8c0..d1e94147fb16 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -482,6 +482,7 @@ static void cma_release_dev(struct rdma_id_private *id_priv)
 	list_del(&id_priv->list);
 	cma_dev_put(id_priv->cma_dev);
 	id_priv->cma_dev = NULL;
+	id_priv->id.device = NULL;
 	if (id_priv->id.route.addr.dev_addr.sgid_attr) {
 		rdma_put_gid_attr(id_priv->id.route.addr.dev_addr.sgid_attr);
 		id_priv->id.route.addr.dev_addr.sgid_attr = NULL;
@@ -1864,6 +1865,7 @@ static void _destroy_id(struct rdma_id_private *id_priv,
 				iw_destroy_cm_id(id_priv->cm_id.iw);
 		}
 		cma_leave_mc_groups(id_priv);
+		rdma_restrack_del(&id_priv->res);
 		cma_release_dev(id_priv);
 	}
 
@@ -1877,7 +1879,6 @@ static void _destroy_id(struct rdma_id_private *id_priv,
 	kfree(id_priv->id.route.path_rec);
 
 	put_net(id_priv->id.route.addr.dev_addr.net);
-	rdma_restrack_del(&id_priv->res);
 	kfree(id_priv);
 }
 
@@ -3740,7 +3741,7 @@ int rdma_listen(struct rdma_cm_id *id, int backlog)
 	}
 
 	id_priv->backlog = backlog;
-	if (id->device) {
+	if (id_priv->cma_dev) {
 		if (rdma_cap_ib_cm(id->device, 1)) {
 			ret = cma_ib_listen(id_priv);
 			if (ret)
-- 
2.30.2

[PATCH 5.10 013/104] nvmet: remove unused ctrl->cqs

[Greg Kroah-Hartman]

From: Amit <amit.engel@dell.com>

[ Upstream commit 6d65aeab7bf6e83e75f53cfdbdb84603e52e1182 ]

remove unused cqs from nvmet_ctrl struct
this will reduce the allocated memory.

Signed-off-by: Amit <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/core.c  | 15 ++-------------
 drivers/nvme/target/nvmet.h |  1 -
 2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 1e79d33c1df7..870d06cfd815 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -757,8 +757,6 @@ void nvmet_cq_setup(struct nvmet_ctrl *ctrl, struct nvmet_cq *cq,
 {
 	cq->qid = qid;
 	cq->size = size;
-
-	ctrl->cqs[qid] = cq;
 }
 
 void nvmet_sq_setup(struct nvmet_ctrl *ctrl, struct nvmet_sq *sq,
@@ -1355,20 +1353,14 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 	if (!ctrl->changed_ns_list)
 		goto out_free_ctrl;
 
-	ctrl->cqs = kcalloc(subsys->max_qid + 1,
-			sizeof(struct nvmet_cq *),
-			GFP_KERNEL);
-	if (!ctrl->cqs)
-		goto out_free_changed_ns_list;
-
 	ctrl->sqs = kcalloc(subsys->max_qid + 1,
 			sizeof(struct nvmet_sq *),
 			GFP_KERNEL);
 	if (!ctrl->sqs)
-		goto out_free_cqs;
+		goto out_free_changed_ns_list;
 
 	if (subsys->cntlid_min > subsys->cntlid_max)
-		goto out_free_cqs;
+		goto out_free_changed_ns_list;
 
 	ret = ida_simple_get(&cntlid_ida,
 			     subsys->cntlid_min, subsys->cntlid_max,
@@ -1406,8 +1398,6 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 
 out_free_sqs:
 	kfree(ctrl->sqs);
-out_free_cqs:
-	kfree(ctrl->cqs);
 out_free_changed_ns_list:
 	kfree(ctrl->changed_ns_list);
 out_free_ctrl:
@@ -1437,7 +1427,6 @@ static void nvmet_ctrl_free(struct kref *ref)
 
 	nvmet_async_events_free(ctrl);
 	kfree(ctrl->sqs);
-	kfree(ctrl->cqs);
 	kfree(ctrl->changed_ns_list);
 	kfree(ctrl);
 
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index bc91336080e0..ea96487b5424 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -164,7 +164,6 @@ static inline struct nvmet_port *ana_groups_to_port(
 
 struct nvmet_ctrl {
 	struct nvmet_subsys	*subsys;
-	struct nvmet_cq		**cqs;
 	struct nvmet_sq		**sqs;
 
 	bool			cmd_seen;
-- 
2.30.2

[PATCH 5.10 014/104] nvmet: fix memory leak in nvmet_alloc_ctrl()

[Greg Kroah-Hartman]

From: Wu Bo <wubo40@huawei.com>

[ Upstream commit fec356a61aa3d3a66416b4321f1279e09e0f256f ]

When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger
than cntlid_max of the subsystem, and jumps to the
"out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed.
Fix this by jumping to the "out_free_sqs" label.

Fixes: 94a39d61f80f ("nvmet: make ctrl-id configurable")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 870d06cfd815..46e4f7ea34c8 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1360,7 +1360,7 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 		goto out_free_changed_ns_list;
 
 	if (subsys->cntlid_min > subsys->cntlid_max)
-		goto out_free_changed_ns_list;
+		goto out_free_sqs;
 
 	ret = ida_simple_get(&cntlid_ida,
 			     subsys->cntlid_min, subsys->cntlid_max,
-- 
2.30.2

[PATCH 5.10 015/104] nvme-loop: fix memory leak in nvme_loop_create_ctrl()

[Greg Kroah-Hartman]

From: Wu Bo <wubo40@huawei.com>

[ Upstream commit 03504e3b54cc8118cc26c064e60a0b00c2308708 ]

When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl()
fails, the loop ctrl should be freed before jumping to the "out" label.

Fixes: 3a85a5de29ea ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/loop.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index f6d81239be21..b869b686e962 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -578,8 +578,10 @@ static struct nvme_ctrl *nvme_loop_create_ctrl(struct device *dev,
 
 	ret = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_loop_ctrl_ops,
 				0 /* no quirks, we're perfect! */);
-	if (ret)
+	if (ret) {
+		kfree(ctrl);
 		goto out;
+	}
 
 	if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
 		WARN_ON_ONCE(1);
-- 
2.30.2

[PATCH 5.10 016/104] nvme-tcp: rerun io_work if req_list is not empty

[Greg Kroah-Hartman]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit a0fdd1418007f83565d3f2e04b47923ba93a9b8c ]

A possible race condition exists where the request to send data is
enqueued from nvme_tcp_handle_r2t()'s will not be observed by
nvme_tcp_send_all() if it happens to be running. The driver relies on
io_work to send the enqueued request when it is runs again, but the
concurrently running nvme_tcp_send_all() may not have released the
send_mutex at that time. If no future commands are enqueued to re-kick
the io_work, the request will timeout in the SEND_H2C state, resulting
in a timeout error like:

  nvme nvme0: queue 1: timeout request 0x3 type 6

Ensure the io_work continues to run as long as the req_list is not empty.

Fixes: db5ad6b7f8cdd ("nvme-tcp: try to send request in queue_rq context")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 4cf81f3841ae..7346a05d395b 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1140,7 +1140,8 @@ static void nvme_tcp_io_work(struct work_struct *w)
 				pending = true;
 			else if (unlikely(result < 0))
 				break;
-		}
+		} else
+			pending = !llist_empty(&queue->req_list);
 
 		result = nvme_tcp_try_recv(queue);
 		if (result > 0)
-- 
2.30.2

[PATCH 5.10 017/104] nvme-fc: clear q_live at beginning of association teardown

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit a7d139145a6640172516b193abf6d2398620aa14 ]

The __nvmf_check_ready() routine used to bounce all filesystem io if the
controller state isn't LIVE.  However, a later patch changed the logic so
that it rejection ends up being based on the Q live check.  The FC
transport has a slightly different sequence from rdma and tcp for
shutting down queues/marking them non-live.  FC marks its queue non-live
after aborting all ios and waiting for their termination, leaving a
rather large window for filesystem io to continue to hit the transport.
Unfortunately this resulted in filesystem I/O or applications seeing I/O
errors.

Change the FC transport to mark the queues non-live at the first sign of
teardown for the association (when I/O is initially terminated).

Fixes: 73a5379937ec ("nvme-fabrics: allow to queue requests for live queues")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 41257daf7464..a0bcec33b020 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2460,6 +2460,18 @@ nvme_fc_terminate_exchange(struct request *req, void *data, bool reserved)
 static void
 __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)
 {
+	int q;
+
+	/*
+	 * if aborting io, the queues are no longer good, mark them
+	 * all as not live.
+	 */
+	if (ctrl->ctrl.queue_count > 1) {
+		for (q = 1; q < ctrl->ctrl.queue_count; q++)
+			clear_bit(NVME_FC_Q_LIVE, &ctrl->queues[q].flags);
+	}
+	clear_bit(NVME_FC_Q_LIVE, &ctrl->queues[0].flags);
+
 	/*
 	 * If io queues are present, stop them and terminate all outstanding
 	 * ios on them. As FC allocates FC exchange for each io, the
-- 
2.30.2

[PATCH 5.10 018/104] platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue

[Greg Kroah-Hartman]

From: Liming Sun <limings@nvidia.com>

[ Upstream commit 1c0e5701c5e792c090aef0e5b9b8923c334d9324 ]

The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-tmfifo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/mellanox/mlxbf-tmfifo.c b/drivers/platform/mellanox/mlxbf-tmfifo.c
index bbc4e71a16ff..38800e86ed8a 100644
--- a/drivers/platform/mellanox/mlxbf-tmfifo.c
+++ b/drivers/platform/mellanox/mlxbf-tmfifo.c
@@ -294,6 +294,9 @@ mlxbf_tmfifo_get_next_desc(struct mlxbf_tmfifo_vring *vring)
 	if (vring->next_avail == virtio16_to_cpu(vdev, vr->avail->idx))
 		return NULL;
 
+	/* Make sure 'avail->idx' is visible already. */
+	virtio_rmb(false);
+
 	idx = vring->next_avail % vr->num;
 	head = virtio16_to_cpu(vdev, vr->avail->ring[idx]);
 	if (WARN_ON(head >= vr->num))
@@ -322,7 +325,7 @@ static void mlxbf_tmfifo_release_desc(struct mlxbf_tmfifo_vring *vring,
 	 * done or not. Add a memory barrier here to make sure the update above
 	 * completes before updating the idx.
 	 */
-	mb();
+	virtio_mb(false);
 	vr->used->idx = cpu_to_virtio16(vdev, vr_idx + 1);
 }
 
@@ -733,6 +736,12 @@ static bool mlxbf_tmfifo_rxtx_one_desc(struct mlxbf_tmfifo_vring *vring,
 		desc = NULL;
 		fifo->vring[is_rx] = NULL;
 
+		/*
+		 * Make sure the load/store are in order before
+		 * returning back to virtio.
+		 */
+		virtio_mb(false);
+
 		/* Notify upper layer that packet is done. */
 		spin_lock_irqsave(&fifo->spin_lock[is_rx], flags);
 		vring_interrupt(0, vring->vq);
-- 
2.30.2

[PATCH 5.10 019/104] platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b68e182a3062e326b891f47152a3a1b84abccf0f ]

Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.

This workaround for the Asus E202SA is causing wakeup by USB keyboard to
not work on other devices with Airmont CPU cores such as the Medion Akoya
E1239T. In hindsight the problem with the Asus E202SA has nothing to do
with Silvermont vs Airmont CPU cores, so the differentiation between the
2 types of CPU cores introduced by the previous fix is wrong.

The real issue at hand is s2idle vs S3 suspend where the suspend is
mostly handled by firmware. The parent IRQ for the INT0002 device is shared
with the ACPI SCI and the real problem is that the INT0002 code should not
be messing with the wakeup settings of that IRQ when suspend/resume is
being handled by the firmware.

Note that on systems which support both s2idle and S3 suspend, which
suspend method to use can be changed at runtime.

This patch fixes both the Asus E202SA spurious wakeups issue as well as
the wakeup by USB keyboard not working on the Medion Akoya E1239T issue.

These are both fixed by replacing the old workaround with delaying the
enable_irq_wake(parent_irq) call till system-suspend time and protecting
it with a !pm_suspend_via_firmware() check so that we still do not call
it on devices using firmware-based (S3) suspend such as the Asus E202SA.

Note rather then adding #ifdef CONFIG_PM_SLEEP, this commit simply adds
a "depends on PM_SLEEP" to the Kconfig since this drivers whole purpose
is to deal with wakeup events, so using it without CONFIG_PM_SLEEP makes
no sense.

Cc: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20210512125523.55215-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig               |  2 +-
 drivers/platform/x86/intel_int0002_vgpio.c | 80 +++++++++++++++-------
 2 files changed, 57 insertions(+), 25 deletions(-)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 0d91d136bc3b..a1858689d6e1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -821,7 +821,7 @@ config INTEL_HID_EVENT
 
 config INTEL_INT0002_VGPIO
 	tristate "Intel ACPI INT0002 Virtual GPIO driver"
-	depends on GPIOLIB && ACPI
+	depends on GPIOLIB && ACPI && PM_SLEEP
 	select GPIOLIB_IRQCHIP
 	help
 	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
index 289c6655d425..569342aa8926 100644
--- a/drivers/platform/x86/intel_int0002_vgpio.c
+++ b/drivers/platform/x86/intel_int0002_vgpio.c
@@ -51,6 +51,12 @@
 #define GPE0A_STS_PORT			0x420
 #define GPE0A_EN_PORT			0x428
 
+struct int0002_data {
+	struct gpio_chip chip;
+	int parent_irq;
+	int wake_enable_count;
+};
+
 /*
  * As this is not a real GPIO at all, but just a hack to model an event in
  * ACPI the get / set functions are dummy functions.
@@ -98,14 +104,16 @@ static void int0002_irq_mask(struct irq_data *data)
 static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
 {
 	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
-	struct platform_device *pdev = to_platform_device(chip->parent);
-	int irq = platform_get_irq(pdev, 0);
+	struct int0002_data *int0002 = container_of(chip, struct int0002_data, chip);
 
-	/* Propagate to parent irq */
+	/*
+	 * Applying of the wakeup flag to our parent IRQ is delayed till system
+	 * suspend, because we only want to do this when using s2idle.
+	 */
 	if (on)
-		enable_irq_wake(irq);
+		int0002->wake_enable_count++;
 	else
-		disable_irq_wake(irq);
+		int0002->wake_enable_count--;
 
 	return 0;
 }
@@ -135,7 +143,7 @@ static bool int0002_check_wake(void *data)
 	return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT);
 }
 
-static struct irq_chip int0002_byt_irqchip = {
+static struct irq_chip int0002_irqchip = {
 	.name			= DRV_NAME,
 	.irq_ack		= int0002_irq_ack,
 	.irq_mask		= int0002_irq_mask,
@@ -143,21 +151,9 @@ static struct irq_chip int0002_byt_irqchip = {
 	.irq_set_wake		= int0002_irq_set_wake,
 };
 
-static struct irq_chip int0002_cht_irqchip = {
-	.name			= DRV_NAME,
-	.irq_ack		= int0002_irq_ack,
-	.irq_mask		= int0002_irq_mask,
-	.irq_unmask		= int0002_irq_unmask,
-	/*
-	 * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
-	 * and we don't want to mess with the ACPI SCI irq settings.
-	 */
-	.flags			= IRQCHIP_SKIP_SET_WAKE,
-};
-
 static const struct x86_cpu_id int0002_cpu_ids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT,	&int0002_byt_irqchip),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT,	&int0002_cht_irqchip),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL),
 	{}
 };
 
@@ -172,8 +168,9 @@ static int int0002_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	const struct x86_cpu_id *cpu_id;
-	struct gpio_chip *chip;
+	struct int0002_data *int0002;
 	struct gpio_irq_chip *girq;
+	struct gpio_chip *chip;
 	int irq, ret;
 
 	/* Menlow has a different INT0002 device? <sigh> */
@@ -185,10 +182,13 @@ static int int0002_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
+	int0002 = devm_kzalloc(dev, sizeof(*int0002), GFP_KERNEL);
+	if (!int0002)
 		return -ENOMEM;
 
+	int0002->parent_irq = irq;
+
+	chip = &int0002->chip;
 	chip->label = DRV_NAME;
 	chip->parent = dev;
 	chip->owner = THIS_MODULE;
@@ -214,7 +214,7 @@ static int int0002_probe(struct platform_device *pdev)
 	}
 
 	girq = &chip->irq;
-	girq->chip = (struct irq_chip *)cpu_id->driver_data;
+	girq->chip = &int0002_irqchip;
 	/* This let us handle the parent IRQ in the driver */
 	girq->parent_handler = NULL;
 	girq->num_parents = 0;
@@ -230,6 +230,7 @@ static int int0002_probe(struct platform_device *pdev)
 
 	acpi_register_wakeup_handler(irq, int0002_check_wake, NULL);
 	device_init_wakeup(dev, true);
+	dev_set_drvdata(dev, int0002);
 	return 0;
 }
 
@@ -240,6 +241,36 @@ static int int0002_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int int0002_suspend(struct device *dev)
+{
+	struct int0002_data *int0002 = dev_get_drvdata(dev);
+
+	/*
+	 * The INT0002 parent IRQ is often shared with the ACPI GPE IRQ, don't
+	 * muck with it when firmware based suspend is used, otherwise we may
+	 * cause spurious wakeups from firmware managed suspend.
+	 */
+	if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
+		enable_irq_wake(int0002->parent_irq);
+
+	return 0;
+}
+
+static int int0002_resume(struct device *dev)
+{
+	struct int0002_data *int0002 = dev_get_drvdata(dev);
+
+	if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
+		disable_irq_wake(int0002->parent_irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops int0002_pm_ops = {
+	.suspend = int0002_suspend,
+	.resume = int0002_resume,
+};
+
 static const struct acpi_device_id int0002_acpi_ids[] = {
 	{ "INT0002", 0 },
 	{ },
@@ -250,6 +281,7 @@ static struct platform_driver int0002_driver = {
 	.driver = {
 		.name			= DRV_NAME,
 		.acpi_match_table	= int0002_acpi_ids,
+		.pm			= &int0002_pm_ops,
 	},
 	.probe	= int0002_probe,
 	.remove	= int0002_remove,
-- 
2.30.2

[PATCH 5.10 020/104] platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3a53587423d25c87af4b4126a806a0575104b45e ]

init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:

[  175.722921] ------------[ cut here ]------------
[  175.722925] Unexpected driver unregister!
[  175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[  175.723089] Call Trace:
[  175.723094]  cleanup_module+0x5/0xedd [dell_smbios]
...
[  175.723148] ---[ end trace 064c34e1ad49509d ]---

Make the unregister happen on the same condition the register happens
to fix this.

Cc: Mario Limonciello <mario.limonciello@outlook.com>
Fixes: 1a258e670434 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/dell-smbios-wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell-smbios-wmi.c
index 27a298b7c541..c97bd4a45242 100644
--- a/drivers/platform/x86/dell-smbios-wmi.c
+++ b/drivers/platform/x86/dell-smbios-wmi.c
@@ -271,7 +271,8 @@ int init_dell_smbios_wmi(void)
 
 void exit_dell_smbios_wmi(void)
 {
-	wmi_driver_unregister(&dell_smbios_wmi_driver);
+	if (wmi_supported)
+		wmi_driver_unregister(&dell_smbios_wmi_driver);
 }
 
 MODULE_DEVICE_TABLE(wmi, dell_smbios_wmi_id_table);
-- 
2.30.2

[PATCH 5.10 021/104] RDMA/mlx5: Fix query DCT via DEVX

[Greg Kroah-Hartman]

From: Maor Gottlieb <maorg@nvidia.com>

[ Upstream commit cfa3b797118eda7d68f9ede9b1a0279192aca653 ]

When executing DEVX command to query QP object, we need to take the QP
type from the mlx5_ib_qp struct which hold the driver specific QP types as
well, such as DC.

Fixes: 34613eb1d2ad ("IB/mlx5: Enable modify and query verbs objects via DEVX")
Link: https://lore.kernel.org/r/6eee15d63f09bb70787488e0cf96216e2957f5aa.1621413654.git.leonro@nvidia.com
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/devx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index efb9ec99b68b..06a873257619 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -559,9 +559,8 @@ static bool devx_is_valid_obj_id(struct uverbs_attr_bundle *attrs,
 	case UVERBS_OBJECT_QP:
 	{
 		struct mlx5_ib_qp *qp = to_mqp(uobj->object);
-		enum ib_qp_type	qp_type = qp->ibqp.qp_type;
 
-		if (qp_type == IB_QPT_RAW_PACKET ||
+		if (qp->type == IB_QPT_RAW_PACKET ||
 		    (qp->flags & IB_QP_CREATE_SOURCE_QPN)) {
 			struct mlx5_ib_raw_packet_qp *raw_packet_qp =
 							 &qp->raw_packet_qp;
@@ -578,10 +577,9 @@ static bool devx_is_valid_obj_id(struct uverbs_attr_bundle *attrs,
 					       sq->tisn) == obj_id);
 		}
 
-		if (qp_type == MLX5_IB_QPT_DCT)
+		if (qp->type == MLX5_IB_QPT_DCT)
 			return get_enc_obj_id(MLX5_CMD_OP_CREATE_DCT,
 					      qp->dct.mdct.mqp.qpn) == obj_id;
-
 		return get_enc_obj_id(MLX5_CMD_OP_CREATE_QP,
 				      qp->ibqp.qp_num) == obj_id;
 	}
-- 
2.30.2

[PATCH 5.10 022/104] RDMA/uverbs: Fix a NULL vs IS_ERR() bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 463a3f66473b58d71428a1c3ce69ea52c05440e5 ]

The uapi_get_object() function returns error pointers, it never returns
NULL.

Fixes: 149d3845f4a5 ("RDMA/uverbs: Add a method to introspect handles in a context")
Link: https://lore.kernel.org/r/YJ6Got+U7lz+3n9a@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/uverbs_std_types_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/uverbs_std_types_device.c b/drivers/infiniband/core/uverbs_std_types_device.c
index a03021d94e11..049684880ae0 100644
--- a/drivers/infiniband/core/uverbs_std_types_device.c
+++ b/drivers/infiniband/core/uverbs_std_types_device.c
@@ -117,8 +117,8 @@ static int UVERBS_HANDLER(UVERBS_METHOD_INFO_HANDLES)(
 		return ret;
 
 	uapi_object = uapi_get_object(attrs->ufile->device->uapi, object_id);
-	if (!uapi_object)
-		return -EINVAL;
+	if (IS_ERR(uapi_object))
+		return PTR_ERR(uapi_object);
 
 	handles = gather_objects_handle(attrs->ufile, uapi_object, attrs,
 					out_len, &total);
-- 
2.30.2

[PATCH 5.10 023/104] tools/testing/selftests/exec: fix link error

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 4d1cd3b2c5c1c32826454de3a18c6183238d47ed ]

Fix the link error by adding '-static':

  gcc -Wall  -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
  /usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
  /usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
  /usr/bin/ld: final link failed: bad value
  collect2: error: ld returned 1 exit status
  make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1

Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/exec/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile
index cf69b2fcce59..dd61118df66e 100644
--- a/tools/testing/selftests/exec/Makefile
+++ b/tools/testing/selftests/exec/Makefile
@@ -28,8 +28,8 @@ $(OUTPUT)/execveat.denatured: $(OUTPUT)/execveat
 	cp $< $@
 	chmod -x $@
 $(OUTPUT)/load_address_4096: load_address.c
-	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000 -pie $< -o $@
+	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000 -pie -static $< -o $@
 $(OUTPUT)/load_address_2097152: load_address.c
-	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x200000 -pie $< -o $@
+	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x200000 -pie -static $< -o $@
 $(OUTPUT)/load_address_16777216: load_address.c
-	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000000 -pie $< -o $@
+	$(CC) $(CFLAGS) $(LDFLAGS) -Wl,-z,max-page-size=0x1000000 -pie -static $< -o $@
-- 
2.30.2

[PATCH 5.10 024/104] powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 2c8c89b95831f46a2fb31a8d0fef4601694023ce ]

The paravit queued spinlock slow path adds itself to the queue then
calls pv_wait to wait for the lock to become free. This is implemented
by calling H_CONFER to donate cycles.

When hcall tracing is enabled, this H_CONFER call can lead to a spin
lock being taken in the tracing code, which will result in the lock to
be taken again, which will also go to the slow path because it queues
behind itself and so won't ever make progress.

An example trace of a deadlock:

  __pv_queued_spin_lock_slowpath
  trace_clock_global
  ring_buffer_lock_reserve
  trace_event_buffer_lock_reserve
  trace_event_buffer_reserve
  trace_event_raw_event_hcall_exit
  __trace_hcall_exit
  plpar_hcall_norets_trace
  __pv_queued_spin_lock_slowpath
  trace_clock_global
  ring_buffer_lock_reserve
  trace_event_buffer_lock_reserve
  trace_event_buffer_reserve
  trace_event_raw_event_rcu_dyntick
  rcu_irq_exit
  irq_exit
  __do_irq
  call_do_irq
  do_IRQ
  hardware_interrupt_common_virt

Fix this by introducing plpar_hcall_norets_notrace(), and using that to
make SPLPAR virtual processor dispatching hcalls by the paravirt
spinlock code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/hvcall.h       |  3 +++
 arch/powerpc/include/asm/paravirt.h     | 22 +++++++++++++++++++---
 arch/powerpc/platforms/pseries/hvCall.S | 10 ++++++++++
 arch/powerpc/platforms/pseries/lpar.c   |  3 +--
 4 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index c1fbccb04390..3e8e19f5746c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -437,6 +437,9 @@
  */
 long plpar_hcall_norets(unsigned long opcode, ...);
 
+/* Variant which does not do hcall tracing */
+long plpar_hcall_norets_notrace(unsigned long opcode, ...);
+
 /**
  * plpar_hcall: - Make a pseries hypervisor call
  * @opcode: The hypervisor call to make.
diff --git a/arch/powerpc/include/asm/paravirt.h b/arch/powerpc/include/asm/paravirt.h
index 9362c94fe3aa..588bfb9a0579 100644
--- a/arch/powerpc/include/asm/paravirt.h
+++ b/arch/powerpc/include/asm/paravirt.h
@@ -24,19 +24,35 @@ static inline u32 yield_count_of(int cpu)
 	return be32_to_cpu(yield_count);
 }
 
+/*
+ * Spinlock code confers and prods, so don't trace the hcalls because the
+ * tracing code takes spinlocks which can cause recursion deadlocks.
+ *
+ * These calls are made while the lock is not held: the lock slowpath yields if
+ * it can not acquire the lock, and unlock slow path might prod if a waiter has
+ * yielded). So this may not be a problem for simple spin locks because the
+ * tracing does not technically recurse on the lock, but we avoid it anyway.
+ *
+ * However the queued spin lock contended path is more strictly ordered: the
+ * H_CONFER hcall is made after the task has queued itself on the lock, so then
+ * recursing on that lock will cause the task to then queue up again behind the
+ * first instance (or worse: queued spinlocks use tricks that assume a context
+ * never waits on more than one spinlock, so such recursion may cause random
+ * corruption in the lock code).
+ */
 static inline void yield_to_preempted(int cpu, u32 yield_count)
 {
-	plpar_hcall_norets(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
+	plpar_hcall_norets_notrace(H_CONFER, get_hard_smp_processor_id(cpu), yield_count);
 }
 
 static inline void prod_cpu(int cpu)
 {
-	plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+	plpar_hcall_norets_notrace(H_PROD, get_hard_smp_processor_id(cpu));
 }
 
 static inline void yield_to_any(void)
 {
-	plpar_hcall_norets(H_CONFER, -1, 0);
+	plpar_hcall_norets_notrace(H_CONFER, -1, 0);
 }
 #else
 static inline bool is_shared_processor(void)
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 2136e42833af..8a2b8d64265b 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -102,6 +102,16 @@ END_FTR_SECTION(0, 1);						\
 #define HCALL_BRANCH(LABEL)
 #endif
 
+_GLOBAL_TOC(plpar_hcall_norets_notrace)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+	HVSC				/* invoke the hypervisor */
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+	blr				/* return r3 = status */
+
 _GLOBAL_TOC(plpar_hcall_norets)
 	HMT_MEDIUM
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 764170fdb0f7..1c3ac0f66336 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -1827,8 +1827,7 @@ void hcall_tracepoint_unregfunc(void)
 
 /*
  * Since the tracing code might execute hcalls we need to guard against
- * recursion. One example of this are spinlocks calling H_YIELD on
- * shared processor partitions.
+ * recursion.
  */
 static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
 
-- 
2.30.2

[PATCH 5.10 025/104] ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]

Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does

	ptrace(PTRACE_CONT, T);
	ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:

	- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
	  and the tracer does a ptrace request without having consumed
	  the exec event, it's 100% sure that the thread the ptracer
	  thinks it is targeting does not exist anymore, or isn't the
	  same as the one it thinks it is targeting.

	- To some degree this patch adds nothing new. In the scenario
	  above ptrace(L) can fail with -ESRCH if it is called after the
	  execing sub-thread wakes the leader up and before it "steals"
	  the leader's pid.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <signal.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <errno.h>
	#include <pthread.h>
	#include <assert.h>

	void *tf(void *arg)
	{
		execve("/usr/bin/true", NULL, NULL);
		assert(0);

		return NULL;
	}

	int main(void)
	{
		int leader = fork();
		if (!leader) {
			kill(getpid(), SIGSTOP);

			pthread_t th;
			pthread_create(&th, NULL, tf, NULL);
			for (;;)
				pause();

			return 0;
		}

		waitpid(leader, NULL, WSTOPPED);

		ptrace(PTRACE_SEIZE, leader, 0,
				PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
		waitpid(leader, NULL, 0);

		ptrace(PTRACE_CONT, leader, 0,0);
		waitpid(leader, NULL, 0);

		int status, thread = waitpid(-1, &status, 0);
		assert(thread > 0 && thread != leader);
		assert(status == 0x80137f);

		ptrace(PTRACE_CONT, thread, 0,0);
		/*
		 * waitid() because waitpid(leader, &status, WNOWAIT) does not
		 * report status. Why ????
		 *
		 * Why WEXITED? because we have another kernel problem connected
		 * to mt-exec.
		 */
		siginfo_t info;
		assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
		assert(info.si_pid == leader && info.si_status == 0x0405);

		/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
		assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
		assert(errno == ESRCH);

		assert(leader == waitpid(leader, &status, WNOHANG));
		assert(status == 0x04057f);

		assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

		return 0;
	}

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pedro Alves <palves@redhat.com>
Acked-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/ptrace.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 79de1294f8eb..eb4d04cb3aaf 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -169,6 +169,21 @@ void __ptrace_unlink(struct task_struct *child)
 	spin_unlock(&child->sighand->siglock);
 }
 
+static bool looks_like_a_spurious_pid(struct task_struct *task)
+{
+	if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP))
+		return false;
+
+	if (task_pid_vnr(task) == task->ptrace_message)
+		return false;
+	/*
+	 * The tracee changed its pid but the PTRACE_EVENT_EXEC event
+	 * was not wait()'ed, most probably debugger targets the old
+	 * leader which was destroyed in de_thread().
+	 */
+	return true;
+}
+
 /* Ensure that nothing can wake it up, even SIGKILL */
 static bool ptrace_freeze_traced(struct task_struct *task)
 {
@@ -179,7 +194,8 @@ static bool ptrace_freeze_traced(struct task_struct *task)
 		return ret;
 
 	spin_lock_irq(&task->sighand->siglock);
-	if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+	if (task_is_traced(task) && !looks_like_a_spurious_pid(task) &&
+	    !__fatal_signal_pending(task)) {
 		task->state = __TASK_TRACED;
 		ret = true;
 	}
-- 
2.30.2

[PATCH 5.10 026/104] nvmet: seset ns->file when open fails

[Greg Kroah-Hartman]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 85428beac80dbcace5b146b218697c73e367dcf5 ]

Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().

The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:

When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:

static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
{
	[...]

	if (req->ns->file)
		return nvmet_file_parse_io_cmd(req);

	return nvmet_bdev_parse_io_cmd(req);
}

Reported-by: Enzo Matsumiya <ematsumiya@suse.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/io-cmd-file.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 0abbefd9925e..b57599724448 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -49,9 +49,11 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
 
 	ns->file = filp_open(ns->device_path, flags, 0);
 	if (IS_ERR(ns->file)) {
-		pr_err("failed to open file %s: (%ld)\n",
-				ns->device_path, PTR_ERR(ns->file));
-		return PTR_ERR(ns->file);
+		ret = PTR_ERR(ns->file);
+		pr_err("failed to open file %s: (%d)\n",
+			ns->device_path, ret);
+		ns->file = NULL;
+		return ret;
 	}
 
 	ret = nvmet_file_ns_revalidate(ns);
-- 
2.30.2

[PATCH 5.10 027/104] perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

[Greg Kroah-Hartman]

From: Like Xu <like.xu@linux.intel.com>

[ Upstream commit 3317c26a4b413b41364f2c4b83c778c6aba1576d ]

The Architecture LBR does not have MSR_LBR_TOS (0x000001c9).
In a guest that should support Architecture LBR, check_msr()
will be a non-related check for the architecture MSR 0x0
(IA32_P5_MC_ADDR) that is also not supported by KVM.

The failure will cause x86_pmu.lbr_nr = 0, thereby preventing
the initialization of the guest Arch LBR. Fix it by avoiding
this extraneous check in intel_pmu_init() for Arch LBR.

Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
[peterz: simpler still]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210430052247.3079672-1-like.xu@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 0b9975200ae3..ee659b5faf71 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -5563,7 +5563,7 @@ __init int intel_pmu_init(void)
 	 * Check all LBT MSR here.
 	 * Disable LBR access if any LBR MSRs can not be accessed.
 	 */
-	if (x86_pmu.lbr_nr && !check_msr(x86_pmu.lbr_tos, 0x3UL))
+	if (x86_pmu.lbr_tos && !check_msr(x86_pmu.lbr_tos, 0x3UL))
 		x86_pmu.lbr_nr = 0;
 	for (i = 0; i < x86_pmu.lbr_nr; i++) {
 		if (!(check_msr(x86_pmu.lbr_from + i, 0xffffUL) &&
-- 
2.30.2

[PATCH 5.10 028/104] locking/lockdep: Correct calling tracepoints

[Greg Kroah-Hartman]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 89e70d5c583c55088faa2201d397ee30a15704aa ]

The commit eb1f00237aca ("lockdep,trace: Expose tracepoints") reverses
tracepoints for lock_contended() and lock_acquired(), thus the ftrace
log shows the wrong locking sequence that "acquired" event is prior to
"contended" event:

  <idle>-0       [001] d.s3 20803.501685: lock_acquire: 0000000008b91ab4 &sg_policy->update_lock
  <idle>-0       [001] d.s3 20803.501686: lock_acquired: 0000000008b91ab4 &sg_policy->update_lock
  <idle>-0       [001] d.s3 20803.501689: lock_contended: 0000000008b91ab4 &sg_policy->update_lock
  <idle>-0       [001] d.s3 20803.501690: lock_release: 0000000008b91ab4 &sg_policy->update_lock

This patch fixes calling tracepoints for lock_contended() and
lock_acquired().

Fixes: eb1f00237aca ("lockdep,trace: Expose tracepoints")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210512120937.90211-1-leo.yan@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 38d7c03e694c..858b96b438ce 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -5664,7 +5664,7 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	trace_lock_acquired(lock, ip);
+	trace_lock_contended(lock, ip);
 
 	if (unlikely(!lock_stat || !lockdep_enabled()))
 		return;
@@ -5682,7 +5682,7 @@ void lock_acquired(struct lockdep_map *lock, unsigned long ip)
 {
 	unsigned long flags;
 
-	trace_lock_contended(lock, ip);
+	trace_lock_acquired(lock, ip);
 
 	if (unlikely(!lock_stat || !lockdep_enabled()))
 		return;
-- 
2.30.2

[PATCH 5.10 029/104] locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 3a010c493271f04578b133de977e0e5dd2848cea ]

When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.

Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/mutex-debug.c |  4 ++--
 kernel/locking/mutex-debug.h |  2 +-
 kernel/locking/mutex.c       | 18 +++++++++++++-----
 kernel/locking/mutex.h       |  4 +---
 4 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
index a7276aaf2abc..db9301591e3f 100644
--- a/kernel/locking/mutex-debug.c
+++ b/kernel/locking/mutex-debug.c
@@ -57,7 +57,7 @@ void debug_mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 	task->blocked_on = waiter;
 }
 
-void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 			 struct task_struct *task)
 {
 	DEBUG_LOCKS_WARN_ON(list_empty(&waiter->list));
@@ -65,7 +65,7 @@ void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 	DEBUG_LOCKS_WARN_ON(task->blocked_on != waiter);
 	task->blocked_on = NULL;
 
-	list_del_init(&waiter->list);
+	INIT_LIST_HEAD(&waiter->list);
 	waiter->task = NULL;
 }
 
diff --git a/kernel/locking/mutex-debug.h b/kernel/locking/mutex-debug.h
index 1edd3f45a4ec..53e631e1d76d 100644
--- a/kernel/locking/mutex-debug.h
+++ b/kernel/locking/mutex-debug.h
@@ -22,7 +22,7 @@ extern void debug_mutex_free_waiter(struct mutex_waiter *waiter);
 extern void debug_mutex_add_waiter(struct mutex *lock,
 				   struct mutex_waiter *waiter,
 				   struct task_struct *task);
-extern void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+extern void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 				struct task_struct *task);
 extern void debug_mutex_unlock(struct mutex *lock);
 extern void debug_mutex_init(struct mutex *lock, const char *name,
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index 2c25b830203c..15ac7c4bb111 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -204,7 +204,7 @@ static inline bool __mutex_waiter_is_first(struct mutex *lock, struct mutex_wait
  * Add @waiter to a given location in the lock wait_list and set the
  * FLAG_WAITERS flag if it's the first waiter.
  */
-static void __sched
+static void
 __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 		   struct list_head *list)
 {
@@ -215,6 +215,16 @@ __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 		__mutex_set_flag(lock, MUTEX_FLAG_WAITERS);
 }
 
+static void
+__mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter)
+{
+	list_del(&waiter->list);
+	if (likely(list_empty(&lock->wait_list)))
+		__mutex_clear_flag(lock, MUTEX_FLAGS);
+
+	debug_mutex_remove_waiter(lock, waiter, current);
+}
+
 /*
  * Give up ownership to a specific task, when @task = NULL, this is equivalent
  * to a regular unlock. Sets PICKUP on a handoff, clears HANDOF, preserves
@@ -1071,9 +1081,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 			__ww_mutex_check_waiters(lock, ww_ctx);
 	}
 
-	mutex_remove_waiter(lock, &waiter, current);
-	if (likely(list_empty(&lock->wait_list)))
-		__mutex_clear_flag(lock, MUTEX_FLAGS);
+	__mutex_remove_waiter(lock, &waiter);
 
 	debug_mutex_free_waiter(&waiter);
 
@@ -1090,7 +1098,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 
 err:
 	__set_current_state(TASK_RUNNING);
-	mutex_remove_waiter(lock, &waiter, current);
+	__mutex_remove_waiter(lock, &waiter);
 err_early_kill:
 	spin_unlock(&lock->wait_lock);
 	debug_mutex_free_waiter(&waiter);
diff --git a/kernel/locking/mutex.h b/kernel/locking/mutex.h
index 1c2287d3fa71..f0c710b1d192 100644
--- a/kernel/locking/mutex.h
+++ b/kernel/locking/mutex.h
@@ -10,12 +10,10 @@
  * !CONFIG_DEBUG_MUTEXES case. Most of them are NOPs:
  */
 
-#define mutex_remove_waiter(lock, waiter, task) \
-		__list_del((waiter)->list.prev, (waiter)->list.next)
-
 #define debug_mutex_wake_waiter(lock, waiter)		do { } while (0)
 #define debug_mutex_free_waiter(waiter)			do { } while (0)
 #define debug_mutex_add_waiter(lock, waiter, ti)	do { } while (0)
+#define debug_mutex_remove_waiter(lock, waiter, ti)     do { } while (0)
 #define debug_mutex_unlock(lock)			do { } while (0)
 #define debug_mutex_init(lock, name, key)		do { } while (0)
 
-- 
2.30.2

[PATCH 5.10 030/104] powerpc: Fix early setup to make early_ioremap() work

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit e2f5efd0f0e229bd110eab513e7c0331d61a4649 ]

The immediate problem is that after commit
0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.

The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().

This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().

Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop unrelated cleanup & cleanup change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520032919.358935-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/setup_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3b871ecb3a92..3f8426bccd16 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -368,11 +368,11 @@ void __init early_setup(unsigned long dt_ptr)
 	apply_feature_fixups();
 	setup_feature_keys();
 
-	early_ioremap_setup();
-
 	/* Initialize the hash table or TLB handling */
 	early_init_mmu();
 
+	early_ioremap_setup();
+
 	/*
 	 * After firmware and early platform setup code has set things up,
 	 * we note the SPR values for configurable control/performance
-- 
2.30.2

[PATCH 5.10 031/104] btrfs: avoid RCU stalls while running delayed iputs

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 71795ee590111e3636cc3c148289dfa9fa0a5fc3 upstream.

Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally.  However there's no guarantee of this, especially for small
files.  In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:

  host count: 5
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208
   	(t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1
  CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1
  Call Trace:
    <IRQ> dump_stack+0x50/0x70
    nmi_cpu_backtrace.cold.6+0x30/0x65
    ? lapic_can_unplug_cpu.cold.30+0x40/0x40
    nmi_trigger_cpumask_backtrace+0xba/0xca
    rcu_dump_cpu_stacks+0x99/0xc7
    rcu_sched_clock_irq.cold.90+0x1b2/0x3a3
    ? trigger_load_balance+0x5c/0x200
    ? tick_sched_do_timer+0x60/0x60
    ? tick_sched_do_timer+0x60/0x60
    update_process_times+0x24/0x50
    tick_sched_timer+0x37/0x70
    __hrtimer_run_queues+0xfe/0x270
    hrtimer_interrupt+0xf4/0x210
    smp_apic_timer_interrupt+0x5e/0x120
    apic_timer_interrupt+0xf/0x20 </IRQ>
   RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0
   RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
   RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029
   RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200
   RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000
   R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200
   R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870
   ? kzalloc.constprop.57+0x30/0x30
   list_lru_add+0x5a/0x100
   inode_lru_list_add+0x20/0x40
   iput+0x1c1/0x1f0
   run_delayed_iput_locked+0x46/0x90
   btrfs_run_delayed_iputs+0x3f/0x60
   cleaner_kthread+0xf2/0x120
   kthread+0x10b/0x130

Fix this by adding a cond_resched_lock() to the loop processing delayed
iputs so we can avoid these sort of stalls.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2967,6 +2967,7 @@ void btrfs_run_delayed_iputs(struct btrf
 		inode = list_first_entry(&fs_info->delayed_iputs,
 				struct btrfs_inode, delayed_iput);
 		run_delayed_iput_locked(fs_info, inode);
+		cond_resched_lock(&fs_info->delayed_iput_lock);
 	}
 	spin_unlock(&fs_info->delayed_iput_lock);
 }

[PATCH 5.10 032/104] cifs: fix memory leak in smb2_copychunk_range

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream.

When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1764,6 +1764,8 @@ smb2_copychunk_range(const unsigned int
 			cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
 
 		/* Request server copy to target from src identified by key */
+		kfree(retbuf);
+		retbuf = NULL;
 		rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
 			trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
 			true /* is_fsctl */, (char *)pcchunk,

[PATCH 5.10 033/104] misc: eeprom: at24: check suspend status before disable regulator

[Greg Kroah-Hartman]

From: Hsin-Yi Wang <hsinyi@chromium.org>

commit 2962484dfef8dbb7f9059822bc26ce8a04d0e47c upstream.

cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") disables
regulator in runtime suspend. If runtime suspend is called before
regulator disable, it will results in regulator unbalanced disabling.

Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control")
Cc: stable <stable@vger.kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210420133050.377209-1-hsinyi@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/eeprom/at24.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -763,7 +763,8 @@ static int at24_probe(struct i2c_client
 	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
 	if (IS_ERR(at24->nvmem)) {
 		pm_runtime_disable(dev);
-		regulator_disable(at24->vcc_reg);
+		if (!pm_runtime_status_suspended(dev))
+			regulator_disable(at24->vcc_reg);
 		return PTR_ERR(at24->nvmem);
 	}
 
@@ -774,7 +775,8 @@ static int at24_probe(struct i2c_client
 	err = at24_read(at24, 0, &test_byte, 1);
 	if (err) {
 		pm_runtime_disable(dev);
-		regulator_disable(at24->vcc_reg);
+		if (!pm_runtime_status_suspended(dev))
+			regulator_disable(at24->vcc_reg);
 		return -ENODEV;
 	}
 

[PATCH 5.10 034/104] ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 4c6fe8c547e3c9e8c15dabdd23c569ee0df3adb1 upstream.

At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.

Cc: <stable@vger.kernel.org>
Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/dice/dice-tcelectronic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/firewire/dice/dice-tcelectronic.c
+++ b/sound/firewire/dice/dice-tcelectronic.c
@@ -38,8 +38,8 @@ static const struct dice_tc_spec konnekt
 };
 
 static const struct dice_tc_spec konnekt_live = {
-	.tx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
-	.rx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
+	.tx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
+	.rx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
 	.has_midi = true,
 };
 

[PATCH 5.10 035/104] ALSA: intel8x0: Dont update period unless prepared

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c1f0616124c455c5c762b6f123e40bba5df759e6 upstream.

The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream.  This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.

For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/intel8x0.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -354,6 +354,7 @@ struct ichdev {
 	unsigned int ali_slot;			/* ALI DMA slot */
 	struct ac97_pcm *pcm;
 	int pcm_open_flag;
+	unsigned int prepared:1;
 	unsigned int suspended: 1;
 };
 
@@ -714,6 +715,9 @@ static inline void snd_intel8x0_update(s
 	int status, civ, i, step;
 	int ack = 0;
 
+	if (!ichdev->prepared || ichdev->suspended)
+		return;
+
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	status = igetbyte(chip, port + ichdev->roff_sr);
 	civ = igetbyte(chip, port + ICH_REG_OFF_CIV);
@@ -904,6 +908,7 @@ static int snd_intel8x0_hw_params(struct
 	if (ichdev->pcm_open_flag) {
 		snd_ac97_pcm_close(ichdev->pcm);
 		ichdev->pcm_open_flag = 0;
+		ichdev->prepared = 0;
 	}
 	err = snd_ac97_pcm_open(ichdev->pcm, params_rate(hw_params),
 				params_channels(hw_params),
@@ -925,6 +930,7 @@ static int snd_intel8x0_hw_free(struct s
 	if (ichdev->pcm_open_flag) {
 		snd_ac97_pcm_close(ichdev->pcm);
 		ichdev->pcm_open_flag = 0;
+		ichdev->prepared = 0;
 	}
 	return 0;
 }
@@ -999,6 +1005,7 @@ static int snd_intel8x0_pcm_prepare(stru
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
+	ichdev->prepared = 1;
 	return 0;
 }
 

[PATCH 5.10 036/104] ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 814b43127f4ac69332e809152e30773941438aff upstream.

The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.

Cc: <stable@vger.kernel.org>
Fixes: 753e717986c2 ("ALSA: firewire-lib: use packet descriptor for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream-trace.h |    6 +++---
 sound/firewire/amdtp-stream.c       |   15 +++++++++------
 2 files changed, 12 insertions(+), 9 deletions(-)

--- a/sound/firewire/amdtp-stream-trace.h
+++ b/sound/firewire/amdtp-stream-trace.h
@@ -14,8 +14,8 @@
 #include <linux/tracepoint.h>
 
 TRACE_EVENT(amdtp_packet,
-	TP_PROTO(const struct amdtp_stream *s, u32 cycles, const __be32 *cip_header, unsigned int payload_length, unsigned int data_blocks, unsigned int data_block_counter, unsigned int index),
-	TP_ARGS(s, cycles, cip_header, payload_length, data_blocks, data_block_counter, index),
+	TP_PROTO(const struct amdtp_stream *s, u32 cycles, const __be32 *cip_header, unsigned int payload_length, unsigned int data_blocks, unsigned int data_block_counter, unsigned int packet_index, unsigned int index),
+	TP_ARGS(s, cycles, cip_header, payload_length, data_blocks, data_block_counter, packet_index, index),
 	TP_STRUCT__entry(
 		__field(unsigned int, second)
 		__field(unsigned int, cycle)
@@ -48,7 +48,7 @@ TRACE_EVENT(amdtp_packet,
 		__entry->payload_quadlets = payload_length / sizeof(__be32);
 		__entry->data_blocks = data_blocks;
 		__entry->data_block_counter = data_block_counter,
-		__entry->packet_index = s->packet_index;
+		__entry->packet_index = packet_index;
 		__entry->irq = !!in_interrupt();
 		__entry->index = index;
 	),
--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -526,7 +526,7 @@ static void build_it_pkt_header(struct a
 	}
 
 	trace_amdtp_packet(s, cycle, cip_header, payload_length, data_blocks,
-			   data_block_counter, index);
+			   data_block_counter, s->packet_index, index);
 }
 
 static int check_cip_header(struct amdtp_stream *s, const __be32 *buf,
@@ -630,7 +630,7 @@ static int parse_ir_ctx_header(struct am
 			       unsigned int *payload_length,
 			       unsigned int *data_blocks,
 			       unsigned int *data_block_counter,
-			       unsigned int *syt, unsigned int index)
+			       unsigned int *syt, unsigned int packet_index, unsigned int index)
 {
 	const __be32 *cip_header;
 	int err;
@@ -662,7 +662,7 @@ static int parse_ir_ctx_header(struct am
 	}
 
 	trace_amdtp_packet(s, cycle, cip_header, *payload_length, *data_blocks,
-			   *data_block_counter, index);
+			   *data_block_counter, packet_index, index);
 
 	return err;
 }
@@ -701,12 +701,13 @@ static int generate_device_pkt_descs(str
 				     unsigned int packets)
 {
 	unsigned int dbc = s->data_block_counter;
+	unsigned int packet_index = s->packet_index;
+	unsigned int queue_size = s->queue_size;
 	int i;
 	int err;
 
 	for (i = 0; i < packets; ++i) {
 		struct pkt_desc *desc = descs + i;
-		unsigned int index = (s->packet_index + i) % s->queue_size;
 		unsigned int cycle;
 		unsigned int payload_length;
 		unsigned int data_blocks;
@@ -715,7 +716,7 @@ static int generate_device_pkt_descs(str
 		cycle = compute_cycle_count(ctx_header[1]);
 
 		err = parse_ir_ctx_header(s, cycle, ctx_header, &payload_length,
-					  &data_blocks, &dbc, &syt, i);
+					  &data_blocks, &dbc, &syt, packet_index, i);
 		if (err < 0)
 			return err;
 
@@ -723,13 +724,15 @@ static int generate_device_pkt_descs(str
 		desc->syt = syt;
 		desc->data_blocks = data_blocks;
 		desc->data_block_counter = dbc;
-		desc->ctx_payload = s->buffer.packets[index].buffer;
+		desc->ctx_payload = s->buffer.packets[packet_index].buffer;
 
 		if (!(s->flags & CIP_DBC_IS_END_EVENT))
 			dbc = (dbc + desc->data_blocks) & 0xff;
 
 		ctx_header +=
 			s->ctx_data.tx.ctx_header_size / sizeof(*ctx_header);
+
+		packet_index = (packet_index + 1) % queue_size;
 	}
 
 	s->data_block_counter = dbc;

[PATCH 5.10 037/104] ALSA: line6: Fix racy initialization of LINE6 MIDI

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream.

The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point.  This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.

This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race.  Also this reduces slightly more lines, so it's a win-win
change.

Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/line6/driver.c |    4 ++++
 sound/usb/line6/pod.c    |    5 -----
 sound/usb/line6/variax.c |    6 ------
 3 files changed, 4 insertions(+), 11 deletions(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -699,6 +699,10 @@ static int line6_init_cap_control(struct
 		line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
 		if (!line6->buffer_message)
 			return -ENOMEM;
+
+		ret = line6_init_midi(line6);
+		if (ret < 0)
+			return ret;
 	} else {
 		ret = line6_hwdep_init(line6);
 		if (ret < 0)
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -376,11 +376,6 @@ static int pod_init(struct usb_line6 *li
 	if (err < 0)
 		return err;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(line6);
-	if (err < 0)
-		return err;
-
 	/* initialize PCM subsystem: */
 	err = line6_init_pcm(line6, &pod_pcm_properties);
 	if (err < 0)
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -159,7 +159,6 @@ static int variax_init(struct usb_line6
 		       const struct usb_device_id *id)
 {
 	struct usb_line6_variax *variax = line6_to_variax(line6);
-	int err;
 
 	line6->process_message = line6_variax_process_message;
 	line6->disconnect = line6_variax_disconnect;
@@ -172,11 +171,6 @@ static int variax_init(struct usb_line6
 	if (variax->buffer_activate == NULL)
 		return -ENOMEM;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(&variax->line6);
-	if (err < 0)
-		return err;
-
 	/* initiate startup procedure: */
 	schedule_delayed_work(&line6->startup_work,
 			      msecs_to_jiffies(VARIAX_STARTUP_DELAY1));

[PATCH 5.10 038/104] ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 1b6604896e78969baffc1b6cc6bc175f95929ac4 upstream.

Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.

This commit fixes hardcoded stream formats.

Cc: <stable@vger.kernel.org>
Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/dice/dice-alesis.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/dice/dice-alesis.c
+++ b/sound/firewire/dice/dice-alesis.c
@@ -16,7 +16,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_
 static const unsigned int
 alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
 	{10, 10, 4},	/* Tx0 = Analog + S/PDIF. */
-	{16, 8, 0},	/* Tx1 = ADAT1 + ADAT2. */
+	{16, 4, 0},	/* Tx1 = ADAT1 + ADAT2 (available at low rate). */
 };
 
 int snd_dice_detect_alesis_formats(struct snd_dice *dice)

[PATCH 5.10 039/104] ALSA: firewire-lib: fix calculation for size of IR context payload

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 1be4f21d9984fa9835fae5411a29465dc5aece6f upstream.

The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -1068,23 +1068,22 @@ static int amdtp_stream_start(struct amd
 		s->data_block_counter = 0;
 	}
 
-	/* initialize packet buffer */
+	// initialize packet buffer.
+	max_ctx_payload_size = amdtp_stream_get_max_payload(s);
 	if (s->direction == AMDTP_IN_STREAM) {
 		dir = DMA_FROM_DEVICE;
 		type = FW_ISO_CONTEXT_RECEIVE;
-		if (!(s->flags & CIP_NO_HEADER))
+		if (!(s->flags & CIP_NO_HEADER)) {
+			max_ctx_payload_size -= 8;
 			ctx_header_size = IR_CTX_HEADER_SIZE_CIP;
-		else
+		} else {
 			ctx_header_size = IR_CTX_HEADER_SIZE_NO_CIP;
-
-		max_ctx_payload_size = amdtp_stream_get_max_payload(s) -
-				       ctx_header_size;
+		}
 	} else {
 		dir = DMA_TO_DEVICE;
 		type = FW_ISO_CONTEXT_TRANSMIT;
 		ctx_header_size = 0;	// No effect for IT context.
 
-		max_ctx_payload_size = amdtp_stream_get_max_payload(s);
 		if (!(s->flags & CIP_NO_HEADER))
 			max_ctx_payload_size -= IT_PKT_HEADER_SIZE_CIP;
 	}

[PATCH 5.10 040/104] ALSA: usb-audio: Validate MS endpoint descriptors

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream.

snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed.  This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.

Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/midi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1889,8 +1889,12 @@ static int snd_usbmidi_get_ms_info(struc
 		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
 		if (!ms_ep)
 			continue;
+		if (ms_ep->bLength <= sizeof(*ms_ep))
+			continue;
 		if (ms_ep->bNumEmbMIDIJack > 0x10)
 			continue;
+		if (ms_ep->bLength < sizeof(*ms_ep) + ms_ep->bNumEmbMIDIJack)
+			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
 				if (++epidx >= MIDI_MAX_ENDPOINTS) {

[PATCH 5.10 041/104] ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f upstream.

Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.

This commit fixes entries in Kconfig and comment in ALSA OXFW driver.

Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/Kconfig       |    4 ++--
 sound/firewire/bebob/bebob.c |    2 +-
 sound/firewire/oxfw/oxfw.c   |    1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -38,7 +38,7 @@ config SND_OXFW
 	   * Mackie(Loud) Onyx 1640i (former model)
 	   * Mackie(Loud) Onyx Satellite
 	   * Mackie(Loud) Tapco Link.Firewire
-	   * Mackie(Loud) d.2 pro/d.4 pro
+	   * Mackie(Loud) d.4 pro
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 	   * Stanton Controllers & Systems 1 Deck/Mixer
@@ -84,7 +84,7 @@ config SND_BEBOB
 	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 	  * BridgeCo RDAudio1/Audio5
 	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
-	  * Mackie d.2 (FireWire Option)
+	  * Mackie d.2 (FireWire Option) and d.2 Pro
 	  * Stanton FinalScratch 2 (ScratchAmp)
 	  * Tascam IF-FW/DM
 	  * Behringer XENIX UFX 1204/1604
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -387,7 +387,7 @@ static const struct ieee1394_device_id b
 	SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
 	/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
-	/* Mackie, d.2 (Firewire Option) */
+	// Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
 	/* Stanton, ScratchAmp */
 	SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -355,7 +355,6 @@ static const struct ieee1394_device_id o
 	 *  Onyx-i series (former models):	0x081216
 	 *  Mackie Onyx Satellite:		0x00200f
 	 *  Tapco LINK.firewire 4x6:		0x000460
-	 *  d.2 pro:				Unknown
 	 *  d.4 pro:				Unknown
 	 *  U.420:				Unknown
 	 *  U.420d:				Unknown

[PATCH 5.10 042/104] ALSA: hda: fixup headset for ASUS GU502 laptop

[Greg Kroah-Hartman]

From: Daniel Cordova A <danesc87@gmail.com>

commit c1b55029493879f5bd585ff79f326e71f0bc05e3 upstream.

The GU502 requires a few steps to make headset i/o works properly:
pincfg, verbs to unmute headphone out and callback to toggle output
between speakers and headphone using jack.

Signed-off-by: Daniel Cordova A <danesc87@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210507173116.12043-1-danesc87@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   62 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6232,6 +6232,35 @@ static void alc294_fixup_gx502_hp(struct
 	}
 }
 
+static void alc294_gu502_toggle_output(struct hda_codec *codec,
+				       struct hda_jack_callback *cb)
+{
+	/* Windows sets 0x10 to 0x8420 for Node 0x20 which is
+	 * responsible from changes between speakers and headphones
+	 */
+	if (snd_hda_jack_detect_state(codec, 0x21) == HDA_JACK_PRESENT)
+		alc_write_coef_idx(codec, 0x10, 0x8420);
+	else
+		alc_write_coef_idx(codec, 0x10, 0x0a20);
+}
+
+static void alc294_fixup_gu502_hp(struct hda_codec *codec,
+				  const struct hda_fixup *fix, int action)
+{
+	if (!is_jack_detectable(codec, 0x21))
+		return;
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_jack_detect_enable_callback(codec, 0x21,
+				alc294_gu502_toggle_output);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc294_gu502_toggle_output(codec, NULL);
+		break;
+	}
+}
+
 static void  alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec,
 			      const struct hda_fixup *fix, int action)
 {
@@ -6449,6 +6478,9 @@ enum {
 	ALC294_FIXUP_ASUS_GX502_HP,
 	ALC294_FIXUP_ASUS_GX502_PINS,
 	ALC294_FIXUP_ASUS_GX502_VERBS,
+	ALC294_FIXUP_ASUS_GU502_HP,
+	ALC294_FIXUP_ASUS_GU502_PINS,
+	ALC294_FIXUP_ASUS_GU502_VERBS,
 	ALC285_FIXUP_HP_GPIO_LED,
 	ALC285_FIXUP_HP_MUTE_LED,
 	ALC236_FIXUP_HP_GPIO_LED,
@@ -7687,6 +7719,35 @@ static const struct hda_fixup alc269_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc294_fixup_gx502_hp,
 	},
+	[ALC294_FIXUP_ASUS_GU502_PINS] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a11050 }, /* rear HP mic */
+			{ 0x1a, 0x01a11830 }, /* rear external mic */
+			{ 0x21, 0x012110f0 }, /* rear HP out */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC294_FIXUP_ASUS_GU502_VERBS
+	},
+	[ALC294_FIXUP_ASUS_GU502_VERBS] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			/* set 0x15 to HP-OUT ctrl */
+			{ 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+			/* unmute the 0x15 amp */
+			{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
+			/* set 0x1b to HP-OUT */
+			{ 0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC294_FIXUP_ASUS_GU502_HP
+	},
+	[ALC294_FIXUP_ASUS_GU502_HP] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc294_fixup_gu502_hp,
+	},
 	[ALC294_FIXUP_ASUS_COEF_1B] = {
 		.type = HDA_FIXUP_VERBS,
 		.v.verbs = (const struct hda_verb[]) {
@@ -8198,6 +8259,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
 	SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502),
+	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),

[PATCH 5.10 043/104] Revert "ALSA: sb8: add a check for request_region"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 94f88309f201821073f57ae6005caefa61bf7b7e upstream.

This reverts commit dcd0feac9bab901d5739de51b3f69840851f8919.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken.  It's just an optional
resource reservation, so removing this check is fine.

Cc: Kangjie Lu <kjlu@umn.edu>
Acked-by: Takashi Iwai <tiwai@suse.de>
Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/sb/sb8.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -96,10 +96,6 @@ static int snd_sb8_probe(struct device *
 
 	/* block the 0x388 port to avoid PnP conflicts */
 	acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
-	if (!acard->fm_res) {
-		err = -EBUSY;
-		goto _err;
-	}
 
 	if (port[dev] != SNDRV_AUTO_PORT) {
 		if ((err = snd_sbdsp_create(card, port[dev], irq[dev],

[PATCH 5.10 044/104] ALSA: firewire-lib: fix check for the size of isochronous packet payload

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 395f41e2cdac63e7581fb9574e5ac0f02556e34a upstream.

The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -633,18 +633,24 @@ static int parse_ir_ctx_header(struct am
 			       unsigned int *syt, unsigned int packet_index, unsigned int index)
 {
 	const __be32 *cip_header;
+	unsigned int cip_header_size;
 	int err;
 
 	*payload_length = be32_to_cpu(ctx_header[0]) >> ISO_DATA_LENGTH_SHIFT;
-	if (*payload_length > s->ctx_data.tx.ctx_header_size +
-					s->ctx_data.tx.max_ctx_payload_length) {
+
+	if (!(s->flags & CIP_NO_HEADER))
+		cip_header_size = 8;
+	else
+		cip_header_size = 0;
+
+	if (*payload_length > cip_header_size + s->ctx_data.tx.max_ctx_payload_length) {
 		dev_err(&s->unit->device,
 			"Detect jumbo payload: %04x %04x\n",
-			*payload_length, s->ctx_data.tx.max_ctx_payload_length);
+			*payload_length, cip_header_size + s->ctx_data.tx.max_ctx_payload_length);
 		return -EIO;
 	}
 
-	if (!(s->flags & CIP_NO_HEADER)) {
+	if (cip_header_size > 0) {
 		cip_header = ctx_header + 2;
 		err = check_cip_header(s, cip_header, *payload_length,
 				       data_blocks, data_block_counter, syt);

[PATCH 5.10 045/104] ALSA: hda/realtek: reset eapd coeff to default value for alc287

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit 8822702f6e4c8917c83ba79e0ebf2c8c218910d4 upstream.

Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.

Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.

BugLink: http://bugs.launchpad.net/bugs/1925057
Suggested-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210507024452.8300-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -395,7 +395,6 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:
-	case 0x10ec0287:
 	case 0x10ec0288:
 	case 0x10ec0285:
 	case 0x10ec0298:
@@ -406,6 +405,10 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0275:
 		alc_update_coef_idx(codec, 0xe, 0, 1<<0);
 		break;
+	case 0x10ec0287:
+		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+		alc_write_coef_idx(codec, 0x8, 0x4ab7);
+		break;
 	case 0x10ec0293:
 		alc_update_coef_idx(codec, 0xa, 1<<13, 0);
 		break;

[PATCH 5.10 046/104] ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293

[Greg Kroah-Hartman]

From: PeiSen Hou <pshou@realtek.com>

commit 1d5cfca286178ce81fb0c8a5f5777ef123cd69e4 upstream.

Fix "use as headset mic, without its own jack detect" problen.

Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8319,12 +8319,19 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x50b8, "Clevo NK50SZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50d5, "Clevo NP50D5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50f0, "Clevo NH50A[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f2, "Clevo NH50E[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50f3, "Clevo NH58DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f5, "Clevo NH55EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f6, "Clevo NH55DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x5101, "Clevo S510WU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x5157, "Clevo W517GU1", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x51a1, "Clevo NS50MU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x70a1, "Clevo NB70T[HJK]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x70b3, "Clevo NK70SB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f2, "Clevo NH79EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f3, "Clevo NH77DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
@@ -8342,9 +8349,17 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8a51, "Clevo NH70RCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8d50, "Clevo NH55RCQ-M", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x951d, "Clevo N950T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x9600, "Clevo N960K[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x961d, "Clevo N960S[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL53RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL5XNU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb022, "Clevo NH77D[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc022, "Clevo NH77[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS),
 	SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),

[PATCH 5.10 047/104] ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 8eedd3a70a70f51fa963f3ad7fa97afd0c75bd44 upstream.

It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.

This patch provides a fixup for the fixed DAC/pin mapping for this
device.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5720,6 +5720,18 @@ static void alc_fixup_tpt470_dacs(struct
 		spec->gen.preferred_dacs = preferred_pairs;
 }
 
+static void alc295_fixup_asus_dacs(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	static const hda_nid_t preferred_pairs[] = {
+		0x17, 0x02, 0x21, 0x03, 0
+	};
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+		spec->gen.preferred_dacs = preferred_pairs;
+}
+
 static void alc_shutup_dell_xps13(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -6520,6 +6532,7 @@ enum {
 	ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST,
 	ALC256_FIXUP_ACER_HEADSET_MIC,
 	ALC285_FIXUP_IDEAPAD_S740_COEF,
+	ALC295_FIXUP_ASUS_DACS,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -8047,6 +8060,10 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
 	},
+	[ALC295_FIXUP_ASUS_DACS] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc295_fixup_asus_dacs,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8245,6 +8262,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
 	SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS),
 	SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
 	SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),

[PATCH 5.10 048/104] ALSA: hda/realtek: Add fixup for HP OMEN laptop

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 5d84b5318d860c9d80ca5dfae0e971ede53b4921 upstream.

HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup.  This patch implements
those in the fixup table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6533,6 +6533,7 @@ enum {
 	ALC256_FIXUP_ACER_HEADSET_MIC,
 	ALC285_FIXUP_IDEAPAD_S740_COEF,
 	ALC295_FIXUP_ASUS_DACS,
+	ALC295_FIXUP_HP_OMEN,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -8064,6 +8065,26 @@ static const struct hda_fixup alc269_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc295_fixup_asus_dacs,
 	},
+	[ALC295_FIXUP_HP_OMEN] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x12, 0xb7a60130 },
+			{ 0x13, 0x40000000 },
+			{ 0x14, 0x411111f0 },
+			{ 0x16, 0x411111f0 },
+			{ 0x17, 0x90170110 },
+			{ 0x18, 0x411111f0 },
+			{ 0x19, 0x02a11030 },
+			{ 0x1a, 0x411111f0 },
+			{ 0x1b, 0x04a19030 },
+			{ 0x1d, 0x40600001 },
+			{ 0x1e, 0x411111f0 },
+			{ 0x21, 0x03211020 },
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8222,6 +8243,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
@@ -8642,6 +8664,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
 	{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
 	{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
+	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
 	{}
 };
 #define ALC225_STANDARD_PINS \

[PATCH 5.10 049/104] ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx

[Greg Kroah-Hartman]

From: Elia Devito <eliadevito@gmail.com>

commit f2be77fee648ddd6d0d259d3527344ba0120e314 upstream.

Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably
on similar models.

0x14 pin config override is required to enable all speakers and
alc285-speaker2-to-dac1 fixup to enable volume adjustment.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210511124651.4802-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6534,6 +6534,7 @@ enum {
 	ALC285_FIXUP_IDEAPAD_S740_COEF,
 	ALC295_FIXUP_ASUS_DACS,
 	ALC295_FIXUP_HP_OMEN,
+	ALC285_FIXUP_HP_SPECTRE_X360,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -8085,6 +8086,15 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
 	},
+	[ALC285_FIXUP_HP_SPECTRE_X360] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x14, 0x90170110 }, /* enable top speaker */
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_SPEAKER2_TO_DAC1,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8245,6 +8255,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
@@ -8665,6 +8676,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
 	{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
 	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
+	{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
 	{}
 };
 #define ALC225_STANDARD_PINS \

[PATCH 5.10 050/104] uio_hv_generic: Fix a memory leak in error handling paths

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 3ee098f96b8b6c1a98f7f97915f8873164e6af9d upstream.

If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.

In such a case, we need to free the buffer explicitly.

Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4fdaff557deef6f0475d02ba7922ddbaa1ab08a6.1620544055.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/uio/uio_hv_generic.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -296,8 +296,10 @@ hv_uio_probe(struct hv_device *dev,
 
 	ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
 				    RECV_BUFFER_SIZE, &pdata->recv_gpadl);
-	if (ret)
+	if (ret) {
+		vfree(pdata->recv_buf);
 		goto fail_close;
+	}
 
 	/* put Global Physical Address Label in name */
 	snprintf(pdata->recv_name, sizeof(pdata->recv_name),
@@ -316,8 +318,10 @@ hv_uio_probe(struct hv_device *dev,
 
 	ret = vmbus_establish_gpadl(channel, pdata->send_buf,
 				    SEND_BUFFER_SIZE, &pdata->send_gpadl);
-	if (ret)
+	if (ret) {
+		vfree(pdata->send_buf);
 		goto fail_close;
+	}
 
 	snprintf(pdata->send_name, sizeof(pdata->send_name),
 		 "send:%u", pdata->send_gpadl);

[PATCH 5.10 051/104] Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e68b86c7b7c059c0f0ec4bf8adabe63f84a61eb upstream.

This reverts commit 23015b22e47c5409620b1726a677d69e5cd032ba.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit has a memory leak on the error path here, it does
not clean up everything properly.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    8 --------
 1 file changed, 8 deletions(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2138,14 +2138,6 @@ static int riocm_add_mport(struct device
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
 	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
-	if (!cm->rx_wq) {
-		riocm_error("failed to allocate IBMBOX_%d on %s",
-			    cmbox, mport->name);
-		rio_release_outb_mbox(mport, cmbox);
-		kfree(cm);
-		return -ENOMEM;
-	}
-
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 5.10 052/104] rapidio: handle create_workqueue() failure

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream.

In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().

Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-46-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2127,6 +2127,14 @@ static int riocm_add_mport(struct device
 		return -ENODEV;
 	}
 
+	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+	if (!cm->rx_wq) {
+		rio_release_inb_mbox(mport, cmbox);
+		rio_release_outb_mbox(mport, cmbox);
+		kfree(cm);
+		return -ENOMEM;
+	}
+
 	/*
 	 * Allocate and register inbound messaging buffers to be ready
 	 * to receive channel and system management requests
@@ -2137,7 +2145,6 @@ static int riocm_add_mport(struct device
 	cm->rx_slots = RIOCM_RX_RING_SIZE;
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
-	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 5.10 053/104] Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 754f39158441f4c0d7a8255209dd9a939f08ce80 upstream.

This reverts commit 32f47179833b63de72427131169809065db6745e.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be not be needed at all as the
change was useless because this function can only be called when
of_match_device matched on something.  So it should be reverted.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: stable <stable@vger.kernel.org>
Fixes: 32f47179833b ("serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference")
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mvebu-uart.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -818,9 +818,6 @@ static int mvebu_uart_probe(struct platf
 		return -EINVAL;
 	}
 
-	if (!match)
-		return -ENODEV;
-
 	/* Assume that all UART ports have a DT alias or none has */
 	id = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (!pdev->dev.of_node || id < 0)

[PATCH 5.10 054/104] nvme-tcp: fix possible use-after-completion

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

commit 825619b09ad351894d2c6fb6705f5b3711d145c7 upstream.

Commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq
context") added a second context that may perform a network send.
This means that now RX and TX are not serialized in nvme_tcp_io_work
and can run concurrently.

While there is correct mutual exclusion in the TX path (where
the send_mutex protect the queue socket send activity) RX activity,
and more specifically request completion may run concurrently.

This means we must guarantee that any mutation of the request state
related to its lifetime, bytes sent must not be accessed when a completion
may have possibly arrived back (and processed).

The race may trigger when a request completion arrives, processed
_and_ reused as a fresh new request, exactly in the (relatively short)
window between the last data payload sent and before the request iov_iter
is advanced.

Consider the following race:
1. 16K write request is queued
2. The nvme command and the data is sent to the controller (in-capsule
   or solicited by r2t)
3. After the last payload is sent but before the req.iter is advanced,
   the controller sends back a completion.
4. The completion is processed, the request is completed, and reused
   to transfer a new request (write or read)
5. The new request is queued, and the driver reset the request parameters
   (nvme_tcp_setup_cmd_pdu).
6. Now context in (2) resumes execution and advances the req.iter

==> use-after-completion as this is already a new request.

Fix this by making sure the request is not advanced after the last
data payload send, knowing that a completion may have arrived already.

An alternative solution would have been to delay the request completion
or state change waiting for reference counting on the TX path, but besides
adding atomic operations to the hot-path, it may present challenges in
multi-stage R2T scenarios where a r2t handler needs to be deferred to
an async execution.

Reported-by: Narayan Ayalasomayajula <narayan.ayalasomayajula@wdc.com>
Tested-by: Anil Mishra <anil.mishra@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -940,7 +940,6 @@ static int nvme_tcp_try_send_data(struct
 		if (ret <= 0)
 			return ret;
 
-		nvme_tcp_advance_req(req, ret);
 		if (queue->data_digest)
 			nvme_tcp_ddgst_update(queue->snd_hash, page,
 					offset, ret);
@@ -957,6 +956,7 @@ static int nvme_tcp_try_send_data(struct
 			}
 			return 1;
 		}
+		nvme_tcp_advance_req(req, ret);
 	}
 	return -EAGAIN;
 }

[PATCH 5.10 055/104] x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

[Greg Kroah-Hartman]

From: Tom Lendacky <thomas.lendacky@amd.com>

commit fea63d54f7a3e74f8ab489a8b82413a29849a594 upstream.

Move the location of sev_es_put_ghcb() in preparation for an update to it
in a follow-on patch. This will better highlight the changes being made
to the function.

No functional change.

Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/8c07662ec17d3d82e5c53841a1d9e766d3bdbab6.1621273353.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/sev-es.c |   36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -209,24 +209,6 @@ static __always_inline struct ghcb *sev_
 	return ghcb;
 }
 
-static __always_inline void sev_es_put_ghcb(struct ghcb_state *state)
-{
-	struct sev_es_runtime_data *data;
-	struct ghcb *ghcb;
-
-	data = this_cpu_read(runtime_data);
-	ghcb = &data->ghcb_page;
-
-	if (state->ghcb) {
-		/* Restore GHCB from Backup */
-		*ghcb = *state->ghcb;
-		data->backup_ghcb_active = false;
-		state->ghcb = NULL;
-	} else {
-		data->ghcb_active = false;
-	}
-}
-
 /* Needed in vc_early_forward_exception */
 void do_early_exception(struct pt_regs *regs, int trapnr);
 
@@ -434,6 +416,24 @@ static enum es_result vc_slow_virt_to_ph
 /* Include code shared with pre-decompression boot stage */
 #include "sev-es-shared.c"
 
+static __always_inline void sev_es_put_ghcb(struct ghcb_state *state)
+{
+	struct sev_es_runtime_data *data;
+	struct ghcb *ghcb;
+
+	data = this_cpu_read(runtime_data);
+	ghcb = &data->ghcb_page;
+
+	if (state->ghcb) {
+		/* Restore GHCB from Backup */
+		*ghcb = *state->ghcb;
+		data->backup_ghcb_active = false;
+		state->ghcb = NULL;
+	} else {
+		data->ghcb_active = false;
+	}
+}
+
 void noinstr __sev_es_nmi_complete(void)
 {
 	struct ghcb_state state;

[PATCH 5.10 056/104] x86/sev-es: Invalidate the GHCB after completing VMGEXIT

[Greg Kroah-Hartman]

From: Tom Lendacky <thomas.lendacky@amd.com>

commit a50c5bebc99c525e7fbc059988c6a5ab8680cb76 upstream.

Since the VMGEXIT instruction can be issued from userspace, invalidate
the GHCB after performing VMGEXIT processing in the kernel.

Invalidation is only required after userspace is available, so call
vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate()
to additionally clear the GHCB exit code so that it is always presented
as 0 when VMGEXIT has been issued by anything else besides the kernel.

Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/5a8130462e4f0057ee1184509cd056eedd78742b.1621273353.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/sev-es-shared.c |    1 +
 arch/x86/kernel/sev-es.c        |    5 +++++
 2 files changed, 6 insertions(+)

--- a/arch/x86/kernel/sev-es-shared.c
+++ b/arch/x86/kernel/sev-es-shared.c
@@ -63,6 +63,7 @@ static bool sev_es_negotiate_protocol(vo
 
 static __always_inline void vc_ghcb_invalidate(struct ghcb *ghcb)
 {
+	ghcb->save.sw_exit_code = 0;
 	memset(ghcb->save.valid_bitmap, 0, sizeof(ghcb->save.valid_bitmap));
 }
 
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -430,6 +430,11 @@ static __always_inline void sev_es_put_g
 		data->backup_ghcb_active = false;
 		state->ghcb = NULL;
 	} else {
+		/*
+		 * Invalidate the GHCB so a VMGEXIT instruction issued
+		 * from userspace won't appear to be valid.
+		 */
+		vc_ghcb_invalidate(ghcb);
 		data->ghcb_active = false;
 	}
 }

[PATCH 5.10 057/104] x86/sev-es: Dont return NULL from sev_es_get_ghcb()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit b250f2f7792d15bcde98e0456781e2835556d5fa upstream.

sev_es_get_ghcb() is called from several places but only one of them
checks the return value. The reaction to returning NULL is always the
same: calling panic() and kill the machine.

Instead of adding checks to all call sites, move the panic() into the
function itself so that it will no longer return NULL.

Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-2-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/sev-es.c |   25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -191,8 +191,18 @@ static __always_inline struct ghcb *sev_
 	if (unlikely(data->ghcb_active)) {
 		/* GHCB is already in use - save its contents */
 
-		if (unlikely(data->backup_ghcb_active))
-			return NULL;
+		if (unlikely(data->backup_ghcb_active)) {
+			/*
+			 * Backup-GHCB is also already in use. There is no way
+			 * to continue here so just kill the machine. To make
+			 * panic() work, mark GHCBs inactive so that messages
+			 * can be printed out.
+			 */
+			data->ghcb_active        = false;
+			data->backup_ghcb_active = false;
+
+			panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
+		}
 
 		/* Mark backup_ghcb active before writing to it */
 		data->backup_ghcb_active = true;
@@ -1262,7 +1272,6 @@ static __always_inline bool on_vc_fallba
  */
 DEFINE_IDTENTRY_VC_SAFE_STACK(exc_vmm_communication)
 {
-	struct sev_es_runtime_data *data = this_cpu_read(runtime_data);
 	irqentry_state_t irq_state;
 	struct ghcb_state state;
 	struct es_em_ctxt ctxt;
@@ -1288,16 +1297,6 @@ DEFINE_IDTENTRY_VC_SAFE_STACK(exc_vmm_co
 	 */
 
 	ghcb = sev_es_get_ghcb(&state);
-	if (!ghcb) {
-		/*
-		 * Mark GHCBs inactive so that panic() is able to print the
-		 * message.
-		 */
-		data->ghcb_active        = false;
-		data->backup_ghcb_active = false;
-
-		panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
-	}
 
 	vc_ghcb_invalidate(ghcb);
 	result = vc_init_em_ctxt(&ctxt, regs, error_code);

[PATCH 5.10 058/104] x86/sev-es: Use __put_user()/__get_user() for data accesses

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 4954f5b8ef0baf70fe978d1a99a5f70e4dd5c877 upstream.

The put_user() and get_user() functions do checks on the address which is
passed to them. They check whether the address is actually a user-space
address and whether its fine to access it. They also call might_fault()
to indicate that they could fault and possibly sleep.

All of these checks are neither wanted nor needed in the #VC exception
handler, which can be invoked from almost any context and also for MMIO
instructions from kernel space on kernel memory. All the #VC handler
wants to know is whether a fault happened when the access was tried.

This is provided by __put_user()/__get_user(), which just do the access
no matter what. Also add comments explaining why __get_user() and
__put_user() are the best choice here and why it is safe to use them
in this context. Also explain why copy_to/from_user can't be used.

In addition, also revert commit

  7024f60d6552 ("x86/sev-es: Handle string port IO to kernel memory properly")

because using __get_user()/__put_user() fixes the same problem while
the above commit introduced several problems:

  1) It uses access_ok() which is only allowed in task context.

  2) It uses memcpy() which has no fault handling at all and is
     thus unsafe to use here.

  [ bp: Fix up commit ID of the reverted commit above. ]

Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-4-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/sev-es.c |   66 ++++++++++++++++++++++++++++++++---------------
 1 file changed, 46 insertions(+), 20 deletions(-)

--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -288,31 +288,44 @@ static enum es_result vc_write_mem(struc
 	u16 d2;
 	u8  d1;
 
-	/* If instruction ran in kernel mode and the I/O buffer is in kernel space */
-	if (!user_mode(ctxt->regs) && !access_ok(target, size)) {
-		memcpy(dst, buf, size);
-		return ES_OK;
-	}
-
+	/*
+	 * This function uses __put_user() independent of whether kernel or user
+	 * memory is accessed. This works fine because __put_user() does no
+	 * sanity checks of the pointer being accessed. All that it does is
+	 * to report when the access failed.
+	 *
+	 * Also, this function runs in atomic context, so __put_user() is not
+	 * allowed to sleep. The page-fault handler detects that it is running
+	 * in atomic context and will not try to take mmap_sem and handle the
+	 * fault, so additional pagefault_enable()/disable() calls are not
+	 * needed.
+	 *
+	 * The access can't be done via copy_to_user() here because
+	 * vc_write_mem() must not use string instructions to access unsafe
+	 * memory. The reason is that MOVS is emulated by the #VC handler by
+	 * splitting the move up into a read and a write and taking a nested #VC
+	 * exception on whatever of them is the MMIO access. Using string
+	 * instructions here would cause infinite nesting.
+	 */
 	switch (size) {
 	case 1:
 		memcpy(&d1, buf, 1);
-		if (put_user(d1, target))
+		if (__put_user(d1, target))
 			goto fault;
 		break;
 	case 2:
 		memcpy(&d2, buf, 2);
-		if (put_user(d2, target))
+		if (__put_user(d2, target))
 			goto fault;
 		break;
 	case 4:
 		memcpy(&d4, buf, 4);
-		if (put_user(d4, target))
+		if (__put_user(d4, target))
 			goto fault;
 		break;
 	case 8:
 		memcpy(&d8, buf, 8);
-		if (put_user(d8, target))
+		if (__put_user(d8, target))
 			goto fault;
 		break;
 	default:
@@ -343,30 +356,43 @@ static enum es_result vc_read_mem(struct
 	u16 d2;
 	u8  d1;
 
-	/* If instruction ran in kernel mode and the I/O buffer is in kernel space */
-	if (!user_mode(ctxt->regs) && !access_ok(s, size)) {
-		memcpy(buf, src, size);
-		return ES_OK;
-	}
-
+	/*
+	 * This function uses __get_user() independent of whether kernel or user
+	 * memory is accessed. This works fine because __get_user() does no
+	 * sanity checks of the pointer being accessed. All that it does is
+	 * to report when the access failed.
+	 *
+	 * Also, this function runs in atomic context, so __get_user() is not
+	 * allowed to sleep. The page-fault handler detects that it is running
+	 * in atomic context and will not try to take mmap_sem and handle the
+	 * fault, so additional pagefault_enable()/disable() calls are not
+	 * needed.
+	 *
+	 * The access can't be done via copy_from_user() here because
+	 * vc_read_mem() must not use string instructions to access unsafe
+	 * memory. The reason is that MOVS is emulated by the #VC handler by
+	 * splitting the move up into a read and a write and taking a nested #VC
+	 * exception on whatever of them is the MMIO access. Using string
+	 * instructions here would cause infinite nesting.
+	 */
 	switch (size) {
 	case 1:
-		if (get_user(d1, s))
+		if (__get_user(d1, s))
 			goto fault;
 		memcpy(buf, &d1, 1);
 		break;
 	case 2:
-		if (get_user(d2, s))
+		if (__get_user(d2, s))
 			goto fault;
 		memcpy(buf, &d2, 2);
 		break;
 	case 4:
-		if (get_user(d4, s))
+		if (__get_user(d4, s))
 			goto fault;
 		memcpy(buf, &d4, 4);
 		break;
 	case 8:
-		if (get_user(d8, s))
+		if (__get_user(d8, s))
 			goto fault;
 		memcpy(buf, &d8, 8);
 		break;

[PATCH 5.10 059/104] x86/sev-es: Forward page-faults which happen during emulation

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit c25bbdb564060adaad5c3a8a10765c13487ba6a3 upstream.

When emulating guest instructions for MMIO or IOIO accesses, the #VC
handler might get a page-fault and will not be able to complete. Forward
the page-fault in this case to the correct handler instead of killing
the machine.

Fixes: 0786138c78e7 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210519135251.30093-3-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/sev-es.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -1269,6 +1269,10 @@ static __always_inline void vc_forward_e
 	case X86_TRAP_UD:
 		exc_invalid_op(ctxt->regs);
 		break;
+	case X86_TRAP_PF:
+		write_cr2(ctxt->fi.cr2);
+		exc_page_fault(ctxt->regs, error_code);
+		break;
 	case X86_TRAP_AC:
 		exc_alignment_check(ctxt->regs, error_code);
 		break;

[PATCH 5.10 060/104] drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE

[Greg Kroah-Hartman]

From: Yi Li <liyi@loongson.cn>

commit d53751568359e5b3ffb859b13cbd79dc77a571f1 upstream.

When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB
entries which need to update in amdgpu_map_buffer() should be multiplied
by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE).

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yi Li <liyi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -267,7 +267,7 @@ static int amdgpu_ttm_map_buffer(struct
 	*addr += offset & ~PAGE_MASK;
 
 	num_dw = ALIGN(adev->mman.buffer_funcs->copy_num_dw, 8);
-	num_bytes = num_pages * 8;
+	num_bytes = num_pages * 8 * AMDGPU_GPU_PAGES_IN_CPU_PAGE;
 
 	r = amdgpu_job_alloc_with_ib(adev, num_dw * 4 + num_bytes,
 				     AMDGPU_IB_POOL_DELAYED, &job);

[PATCH 5.10 061/104] drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang

[Greg Kroah-Hartman]

From: Changfeng <Changfeng.Zhu@amd.com>

commit dbd1003d1252db5973dddf20b24bb0106ac52aa2 upstream.

There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.

Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c |   10 +++++++---
 drivers/gpu/drm/amd/amdgpu/soc15.c    |    2 --
 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -4859,7 +4859,7 @@ static void gfx_v9_0_update_3d_clock_gat
 	amdgpu_gfx_rlc_enter_safe_mode(adev);
 
 	/* Enable 3D CGCG/CGLS */
-	if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)) {
+	if (enable) {
 		/* write cmd to clear cgcg/cgls ov */
 		def = data = RREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE);
 		/* unset CGCG override */
@@ -4871,8 +4871,12 @@ static void gfx_v9_0_update_3d_clock_gat
 		/* enable 3Dcgcg FSM(0x0000363f) */
 		def = RREG32_SOC15(GC, 0, mmRLC_CGCG_CGLS_CTRL_3D);
 
-		data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
-			RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+		if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)
+			data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
+				RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+		else
+			data = 0x0 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT;
+
 		if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGLS)
 			data |= (0x000F << RLC_CGCG_CGLS_CTRL_3D__CGLS_REP_COMPANSAT_DELAY__SHIFT) |
 				RLC_CGCG_CGLS_CTRL_3D__CGLS_EN_MASK;
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1183,7 +1183,6 @@ static int soc15_common_early_init(void
 			adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
 				AMD_CG_SUPPORT_GFX_MGLS |
 				AMD_CG_SUPPORT_GFX_CP_LS |
-				AMD_CG_SUPPORT_GFX_3D_CGCG |
 				AMD_CG_SUPPORT_GFX_3D_CGLS |
 				AMD_CG_SUPPORT_GFX_CGCG |
 				AMD_CG_SUPPORT_GFX_CGLS |
@@ -1203,7 +1202,6 @@ static int soc15_common_early_init(void
 				AMD_CG_SUPPORT_GFX_MGLS |
 				AMD_CG_SUPPORT_GFX_RLC_LS |
 				AMD_CG_SUPPORT_GFX_CP_LS |
-				AMD_CG_SUPPORT_GFX_3D_CGCG |
 				AMD_CG_SUPPORT_GFX_3D_CGLS |
 				AMD_CG_SUPPORT_GFX_CGCG |
 				AMD_CG_SUPPORT_GFX_CGLS |

[PATCH 5.10 062/104] drm/amdgpu: update gc golden setting for Navi12

[Greg Kroah-Hartman]

From: Guchun Chen <guchun.chen@amd.com>

commit 99c45ba5799d6b938bd9bd20edfeb6f3e3e039b9 upstream.

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -1334,9 +1334,10 @@ static const struct soc15_reg_golden gol
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG, 0xffffffff, 0x20000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xffffffff, 0x00000420),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG3, 0xffffffff, 0x00000200),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04800000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04900000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DFSM_TILES_IN_FLIGHT, 0x0000ffff, 0x0000003f),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_LAST_OF_BURST_CONFIG, 0xffffffff, 0x03860204),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGB_ADDR_CONFIG, 0x0c1800ff, 0x00000044),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGCR_GENERAL_CNTL, 0x1ff0ffff, 0x00000500),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGE_PRIV_CONTROL, 0x00007fff, 0x000001fe),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL1_PIPE_STEER, 0xffffffff, 0xe4e4e4e4),
@@ -1354,12 +1355,13 @@ static const struct soc15_reg_golden gol
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE_2, 0x00000820, 0x00000820),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_LINE_STIPPLE_STATE, 0x0000ff0f, 0x00000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRMI_SPARE, 0xffffffff, 0xffff3101),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1, 0x001f0000, 0x00070104),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ALU_CLK_CTRL, 0xffffffff, 0xffffffff),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ARB_CONFIG, 0x00000133, 0x00000130),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_LDS_CLK_CTRL, 0xffffffff, 0xffffffff),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0xfff7ffff, 0x01030000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CNTL, 0xffdf80ff, 0x479c0010),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00800000)
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00c00000)
 };
 
 static void gfx_v10_rlcg_wreg(struct amdgpu_device *adev, u32 offset, u32 v)

[PATCH 5.10 063/104] drm/amdgpu: update sdma golden setting for Navi12

[Greg Kroah-Hartman]

From: Guchun Chen <guchun.chen@amd.com>

commit 77194d8642dd4cb7ea8ced77bfaea55610574c38 upstream.

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -124,6 +124,10 @@ static const struct soc15_reg_golden gol
 
 static const struct soc15_reg_golden golden_settings_sdma_nv12[] = {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
 };
 

[PATCH 5.10 064/104] powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

commit 5665bc35c1ed917ac8fd06cb651317bb47a65b10 upstream.

The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.

Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/powerpc/syscall64-abi.rst       |   10 +++++++++
 tools/testing/selftests/seccomp/seccomp_bpf.c |   27 +++++++++++++++++---------
 2 files changed, 28 insertions(+), 9 deletions(-)

--- a/Documentation/powerpc/syscall64-abi.rst
+++ b/Documentation/powerpc/syscall64-abi.rst
@@ -96,6 +96,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -1753,16 +1753,25 @@ TEST_F(TRACE_poke, getpid_runs_normally)
 # define SYSCALL_RET_SET(_regs, _val)				\
 	do {							\
 		typeof(_val) _result = (_val);			\
-		/*						\
-		 * A syscall error is signaled by CR0 SO bit	\
-		 * and the code is stored as a positive value.	\
-		 */						\
-		if (_result < 0) {				\
-			SYSCALL_RET(_regs) = -_result;		\
-			(_regs).ccr |= 0x10000000;		\
-		} else {					\
+		if ((_regs.trap & 0xfff0) == 0x3000) {		\
+			/*					\
+			 * scv 0 system call uses -ve result	\
+			 * for error, so no need to adjust.	\
+			 */					\
 			SYSCALL_RET(_regs) = _result;		\
-			(_regs).ccr &= ~0x10000000;		\
+		} else {					\
+			/*					\
+			 * A syscall error is signaled by the	\
+			 * CR0 SO bit and the code is stored as	\
+			 * a positive value.			\
+			 */					\
+			if (_result < 0) {			\
+				SYSCALL_RET(_regs) = -_result;	\
+				(_regs).ccr |= 0x10000000;	\
+			} else {				\
+				SYSCALL_RET(_regs) = _result;	\
+				(_regs).ccr &= ~0x10000000;	\
+			}					\
 		}						\
 	} while (0)
 # define SYSCALL_RET_SET_ON_PTRACE_EXIT

[PATCH 5.10 065/104] powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

commit d72500f992849d31ebae8f821a023660ddd0dcc2 upstream.

The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.

Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-2-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/ptrace.h  |   45 +++++++++++++++++++++----------------
 arch/powerpc/include/asm/syscall.h |   42 +++++++++++++++++++++-------------
 2 files changed, 52 insertions(+), 35 deletions(-)

--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -19,6 +19,7 @@
 #ifndef _ASM_POWERPC_PTRACE_H
 #define _ASM_POWERPC_PTRACE_H
 
+#include <linux/err.h>
 #include <uapi/asm/ptrace.h>
 #include <asm/asm-const.h>
 
@@ -144,25 +145,6 @@ extern unsigned long profile_pc(struct p
 long do_syscall_trace_enter(struct pt_regs *regs);
 void do_syscall_trace_leave(struct pt_regs *regs);
 
-#define kernel_stack_pointer(regs) ((regs)->gpr[1])
-static inline int is_syscall_success(struct pt_regs *regs)
-{
-	return !(regs->ccr & 0x10000000);
-}
-
-static inline long regs_return_value(struct pt_regs *regs)
-{
-	if (is_syscall_success(regs))
-		return regs->gpr[3];
-	else
-		return -regs->gpr[3];
-}
-
-static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
-{
-	regs->gpr[3] = rc;
-}
-
 #ifdef __powerpc64__
 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
 #else
@@ -245,6 +227,31 @@ static inline void set_trap_norestart(st
 	regs->trap |= 0x10;
 }
 
+#define kernel_stack_pointer(regs) ((regs)->gpr[1])
+static inline int is_syscall_success(struct pt_regs *regs)
+{
+	if (trap_is_scv(regs))
+		return !IS_ERR_VALUE((unsigned long)regs->gpr[3]);
+	else
+		return !(regs->ccr & 0x10000000);
+}
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	if (trap_is_scv(regs))
+		return regs->gpr[3];
+
+	if (is_syscall_success(regs))
+		return regs->gpr[3];
+	else
+		return -regs->gpr[3];
+}
+
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->gpr[3] = rc;
+}
+
 #define arch_has_single_step()	(1)
 #define arch_has_block_step()	(true)
 #define ARCH_HAS_USER_SINGLE_STEP_REPORT
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -41,11 +41,17 @@ static inline void syscall_rollback(stru
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	/*
-	 * If the system call failed,
-	 * regs->gpr[3] contains a positive ERRORCODE.
-	 */
-	return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+	if (trap_is_scv(regs)) {
+		unsigned long error = regs->gpr[3];
+
+		return IS_ERR_VALUE(error) ? error : 0;
+	} else {
+		/*
+		 * If the system call failed,
+		 * regs->gpr[3] contains a positive ERRORCODE.
+		 */
+		return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0;
+	}
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -58,18 +64,22 @@ static inline void syscall_set_return_va
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	/*
-	 * In the general case it's not obvious that we must deal with CCR
-	 * here, as the syscall exit path will also do that for us. However
-	 * there are some places, eg. the signal code, which check ccr to
-	 * decide if the value in r3 is actually an error.
-	 */
-	if (error) {
-		regs->ccr |= 0x10000000L;
-		regs->gpr[3] = error;
+	if (trap_is_scv(regs)) {
+		regs->gpr[3] = (long) error ?: val;
 	} else {
-		regs->ccr &= ~0x10000000L;
-		regs->gpr[3] = val;
+		/*
+		 * In the general case it's not obvious that we must deal with
+		 * CCR here, as the syscall exit path will also do that for us.
+		 * However there are some places, eg. the signal code, which
+		 * check ccr to decide if the value in r3 is actually an error.
+		 */
+		if (error) {
+			regs->ccr |= 0x10000000L;
+			regs->gpr[3] = error;
+		} else {
+			regs->ccr &= ~0x10000000L;
+			regs->gpr[3] = val;
+		}
 	}
 }
 

[PATCH 5.10 066/104] mmc: sdhci-pci-gli: increase 1.8V regulator wait

[Greg Kroah-Hartman]

From: Daniel Beer <dlbeer@gmail.com>

commit a1149a6c06ee094a6e62886b0c0e8e66967a728a upstream.

Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755)
results in the message:

    mmc0: 1.8V regulator output did not become stable

Following this message, some cards work (sometimes), but most cards fail
with EILSEQ. This behaviour is observed on Debian 10 running kernel
4.19.188, but also with 5.8.18 and 5.11.15.

The driver currently waits 5ms after switching on the 1.8V regulator for
it to become stable. Increasing this to 10ms gets rid of the warning
about stability, but most cards still fail. Increasing it to 20ms gets
some cards working (a 32GB Samsung micro SD works, a 128GB ADATA
doesn't). At 50ms, the ADATA works most of the time, and at 100ms both
cards work reliably.

Signed-off-by: Daniel Beer <dlbeer@gmail.com>
Acked-by: Ben Chuang <benchuanggli@gmail.com>
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210424081652.GA16047@nyquist.nev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-gli.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -555,8 +555,13 @@ static void sdhci_gli_voltage_switch(str
 	 *
 	 * Wait 5ms after set 1.8V signal enable in Host Control 2 register
 	 * to ensure 1.8V signal enable bit is set by GL9750/GL9755.
+	 *
+	 * ...however, the controller in the NUC10i3FNK4 (a 9755) requires
+	 * slightly longer than 5ms before the control register reports that
+	 * 1.8V is ready, and far longer still before the card will actually
+	 * work reliably.
 	 */
-	usleep_range(5000, 5500);
+	usleep_range(100000, 110000);
 }
 
 static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)

[PATCH 5.10 067/104] xen-pciback: redo VF placement in the virtual topology

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 4ba50e7c423c29639878c00573288869aa627068 upstream.

The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().

Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).

Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-pciback/vpci.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -70,7 +70,7 @@ static int __xen_pcibk_add_pci_dev(struc
 				   struct pci_dev *dev, int devid,
 				   publish_pci_dev_cb publish_cb)
 {
-	int err = 0, slot, func = -1;
+	int err = 0, slot, func = PCI_FUNC(dev->devfn);
 	struct pci_dev_entry *t, *dev_entry;
 	struct vpci_dev_data *vpci_dev = pdev->pci_dev_data;
 
@@ -95,22 +95,25 @@ static int __xen_pcibk_add_pci_dev(struc
 
 	/*
 	 * Keep multi-function devices together on the virtual PCI bus, except
-	 * virtual functions.
+	 * that we want to keep virtual functions at func 0 on their own. They
+	 * aren't multi-function devices and hence their presence at func 0
+	 * may cause guests to not scan the other functions.
 	 */
-	if (!dev->is_virtfn) {
+	if (!dev->is_virtfn || func) {
 		for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
 			if (list_empty(&vpci_dev->dev_list[slot]))
 				continue;
 
 			t = list_entry(list_first(&vpci_dev->dev_list[slot]),
 				       struct pci_dev_entry, list);
+			if (t->dev->is_virtfn && !PCI_FUNC(t->dev->devfn))
+				continue;
 
 			if (match_slot(dev, t->dev)) {
 				dev_info(&dev->dev, "vpci: assign to virtual slot %d func %d\n",
-					 slot, PCI_FUNC(dev->devfn));
+					 slot, func);
 				list_add_tail(&dev_entry->list,
 					      &vpci_dev->dev_list[slot]);
-				func = PCI_FUNC(dev->devfn);
 				goto unlock;
 			}
 		}
@@ -123,7 +126,6 @@ static int __xen_pcibk_add_pci_dev(struc
 				 slot);
 			list_add_tail(&dev_entry->list,
 				      &vpci_dev->dev_list[slot]);
-			func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn);
 			goto unlock;
 		}
 	}

[PATCH 5.10 068/104] xen-pciback: reconfigure also from backend watch handler

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit c81d3d24602540f65256f98831d0a25599ea6b87 upstream.

When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-pciback/xenbus.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -359,7 +359,8 @@ out:
 	return err;
 }
 
-static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev)
+static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev,
+				 enum xenbus_state state)
 {
 	int err = 0;
 	int num_devs;
@@ -373,9 +374,7 @@ static int xen_pcibk_reconfigure(struct
 	dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");
 
 	mutex_lock(&pdev->dev_lock);
-	/* Make sure we only reconfigure once */
-	if (xenbus_read_driver_state(pdev->xdev->nodename) !=
-	    XenbusStateReconfiguring)
+	if (xenbus_read_driver_state(pdev->xdev->nodename) != state)
 		goto out;
 
 	err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
@@ -500,6 +499,10 @@ static int xen_pcibk_reconfigure(struct
 		}
 	}
 
+	if (state != XenbusStateReconfiguring)
+		/* Make sure we only reconfigure once. */
+		goto out;
+
 	err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured);
 	if (err) {
 		xenbus_dev_fatal(pdev->xdev, err,
@@ -525,7 +528,7 @@ static void xen_pcibk_frontend_changed(s
 		break;
 
 	case XenbusStateReconfiguring:
-		xen_pcibk_reconfigure(pdev);
+		xen_pcibk_reconfigure(pdev, XenbusStateReconfiguring);
 		break;
 
 	case XenbusStateConnected:
@@ -664,6 +667,15 @@ static void xen_pcibk_be_watch(struct xe
 		xen_pcibk_setup_backend(pdev);
 		break;
 
+	case XenbusStateInitialised:
+		/*
+		 * We typically move to Initialised when the first device was
+		 * added. Hence subsequent devices getting added may need
+		 * reconfiguring.
+		 */
+		xen_pcibk_reconfigure(pdev, XenbusStateInitialised);
+		break;
+
 	default:
 		break;
 	}

[PATCH 5.10 069/104] ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry

[Greg Kroah-Hartman]

From: Varad Gautam <varad.gautam@suse.com>

commit a11ddb37bf367e6b5239b95ca759e5389bb46048 upstream.

do_mq_timedreceive calls wq_sleep with a stack local address.  The
sender (do_mq_timedsend) uses this address to later call pipelined_send.

This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:

  RIP: 0010:wake_q_add_safe+0x13/0x60
  Call Trace:
   __x64_sys_mq_timedsend+0x2a9/0x490
   do_syscall_64+0x80/0x680
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5928e40343

The race occurs as:

1. do_mq_timedreceive calls wq_sleep with the address of `struct
   ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
   holds a valid `struct ext_wait_queue *` as long as the stack has not
   been overwritten.

2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
   do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
   __pipelined_op.

3. Sender calls __pipelined_op::smp_store_release(&this->state,
   STATE_READY).  Here is where the race window begins.  (`this` is
   `ewq_addr`.)

4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
   will see `state == STATE_READY` and break.

5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
   to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
   stack.  (Although the address may not get overwritten until another
   function happens to touch it, which means it can persist around for an
   indefinite time.)

6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
   `struct ext_wait_queue *`, and uses it to find a task_struct to pass to
   the wake_q_add_safe call.  In the lucky case where nothing has
   overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
   In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
   bogus address as the receiver's task_struct causing the crash.

do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.

As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare.  Fix
those in the same way.

Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com
Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <varad.gautam@suse.com>
Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 ipc/mqueue.c |    6 ++++--
 ipc/msg.c    |    6 ++++--
 ipc/sem.c    |    6 ++++--
 3 files changed, 12 insertions(+), 6 deletions(-)

--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -1003,12 +1003,14 @@ static inline void __pipelined_op(struct
 				  struct mqueue_inode_info *info,
 				  struct ext_wait_queue *this)
 {
+	struct task_struct *task;
+
 	list_del(&this->list);
-	get_task_struct(this->task);
+	task = get_task_struct(this->task);
 
 	/* see MQ_BARRIER for purpose/pairing */
 	smp_store_release(&this->state, STATE_READY);
-	wake_q_add_safe(wake_q, this->task);
+	wake_q_add_safe(wake_q, task);
 }
 
 /* pipelined_send() - send a message directly to the task waiting in
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -251,11 +251,13 @@ static void expunge_all(struct msg_queue
 	struct msg_receiver *msr, *t;
 
 	list_for_each_entry_safe(msr, t, &msq->q_receivers, r_list) {
-		get_task_struct(msr->r_tsk);
+		struct task_struct *r_tsk;
+
+		r_tsk = get_task_struct(msr->r_tsk);
 
 		/* see MSG_BARRIER for purpose/pairing */
 		smp_store_release(&msr->r_msg, ERR_PTR(res));
-		wake_q_add_safe(wake_q, msr->r_tsk);
+		wake_q_add_safe(wake_q, r_tsk);
 	}
 }
 
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -784,12 +784,14 @@ would_block:
 static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
 					     struct wake_q_head *wake_q)
 {
-	get_task_struct(q->sleeper);
+	struct task_struct *sleeper;
+
+	sleeper = get_task_struct(q->sleeper);
 
 	/* see SEM_BARRIER_2 for purpuse/pairing */
 	smp_store_release(&q->status, error);
 
-	wake_q_add_safe(wake_q, q->sleeper);
+	wake_q_add_safe(wake_q, sleeper);
 }
 
 static void unlink_queue(struct sem_array *sma, struct sem_queue *q)

[PATCH 5.10 070/104] dm snapshot: fix a crash when an origin has no snapshots

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 7ee06ddc4038f936b0d4459d37a7d4d844fb03db upstream.

If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().

Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -854,12 +854,11 @@ static int dm_add_exception(void *contex
 static uint32_t __minimum_chunk_size(struct origin *o)
 {
 	struct dm_snapshot *snap;
-	unsigned chunk_size = 0;
+	unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
 
 	if (o)
 		list_for_each_entry(snap, &o->snapshots, list)
-			chunk_size = min_not_zero(chunk_size,
-						  snap->store->chunk_size);
+			chunk_size = min(chunk_size, snap->store->chunk_size);
 
 	return (uint32_t) chunk_size;
 }

[PATCH 5.10 071/104] dm snapshot: fix crash with transient storage and zero chunk size

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit c699a0db2d62e3bbb7f0bf35c87edbc8d23e3062 upstream.

The following commands will crash the kernel:

modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"

The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.

In order to fix the bug, we set the variable "r" to -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1407,6 +1407,7 @@ static int snapshot_ctr(struct dm_target
 
 	if (!s->store->chunk_size) {
 		ti->error = "Chunk size not set";
+		r = -EINVAL;
 		goto bad_read_metadata;
 	}
 

[PATCH 5.10 072/104] kcsan: Fix debugfs initcall return type

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 976aac5f882989e4f6c1b3a7224819bf0e801c6a upstream.

clang with CONFIG_LTO_CLANG points out that an initcall function should
return an 'int' due to the changes made to the initcall macros in commit
3578ad11f3fb ("init: lto: fix PREL32 relocations"):

kernel/kcsan/debugfs.c:274:15: error: returning 'void' from a function with incompatible result type 'int'
late_initcall(kcsan_debugfs_init);
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
include/linux/init.h:292:46: note: expanded from macro 'late_initcall'
 #define late_initcall(fn)               __define_initcall(fn, 7)

Fixes: e36299efe7d7 ("kcsan, debugfs: Move debugfs file creation out of early init")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/kcsan/debugfs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/kcsan/debugfs.c
+++ b/kernel/kcsan/debugfs.c
@@ -261,9 +261,10 @@ static const struct file_operations debu
 	.release = single_release
 };
 
-static void __init kcsan_debugfs_init(void)
+static int __init kcsan_debugfs_init(void)
 {
 	debugfs_create_file("kcsan", 0644, NULL, NULL, &debugfs_ops);
+	return 0;
 }
 
 late_initcall(kcsan_debugfs_init);

[PATCH 5.10 073/104] Revert "video: hgafb: fix potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 58c0cc2d90f1e37c4eb63ae7f164c83830833f78 upstream.

This reverts commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.

So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all.  I'll go fix this up properly...

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: ec7f6aad57ad ("video: hgafb: fix potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-39-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,8 +285,6 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
-	if (!hga_vram)
-		goto error;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;

[PATCH 5.10 074/104] Revert "net: stmicro: fix a missing check of clk_prepare"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bee1b0511844c8c79fccf1f2b13472393b6b91f7 upstream.

This reverts commit f86a3b83833e7cfe558ca4d70b64ebc48903efec.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit causes a memory leak when it is trying to claim it
is properly handling errors.  Revert this change and fix it up properly
in a follow-on commit.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -50,9 +50,7 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		ret = clk_prepare(gmac->tx_clk);
-		if (ret)
-			return ret;
+		clk_prepare(gmac->tx_clk);
 	}
 
 	return 0;

[PATCH 5.10 075/104] Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d1beda5f11953ffe135a5213287f0b25b4da41b upstream.

This reverts commit 248b57015f35c94d4eae2fdd8c6febf5cd703900.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read")
Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,9 +305,7 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
-	if (ret)
-		return ret;
+	lp55xx_read(chip, LP5523_REG_STATUS, &status);
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 5.10 076/104] Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream.

This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all so
just revert it.  Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.

Cc: Kangjie Lu <kjlu@umn.edu>
Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe")
Cc: stable <stable@vger.kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/lm80.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -596,7 +596,6 @@ static int lm80_probe(struct i2c_client
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct lm80_data *data;
-	int rv;
 
 	data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
 	if (!data)
@@ -609,14 +608,8 @@ static int lm80_probe(struct i2c_client
 	lm80_init_client(client);
 
 	/* A few vars need to be filled upon startup */
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][0] = rv;
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][1] = rv;
+	data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+	data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, lm80_groups);

[PATCH 5.10 077/104] Revert "video: imsttfb: fix potential NULL pointer dereferences"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed04fe8a0e87d7b5ea17d47f4ac9ec962b24814a upstream.

This reverts commit 1d84353d205a953e2381044953b7fa31c8c9702d.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.

Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: 1d84353d205a ("video: imsttfb: fix potential NULL pointer dereferences")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-67-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/imsttfb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -1512,11 +1512,6 @@ static int imsttfb_probe(struct pci_dev
 	info->fix.smem_start = addr;
 	info->screen_base = (__u8 *)ioremap(addr, par->ramdac == IBM ?
 					    0x400000 : 0x800000);
-	if (!info->screen_base) {
-		release_mem_region(addr, size);
-		framebuffer_release(info);
-		return -ENOMEM;
-	}
 	info->fix.mmio_start = addr + 0x800000;
 	par->dc_regs = ioremap(addr + 0x800000, 0x1000);
 	par->cmap_regs_phys = addr + 0x840000;

[PATCH 5.10 078/104] Revert "ecryptfs: replace BUG_ON with error handling code"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1436df2f2550bc89d832ffd456373fdf5d5b5d7 upstream.

This reverts commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true.  As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.

Cc: Aditya Pakki <pakki001@umn.edu>
Fixes: 2c2a7552dd64 ("ecryptfs: replace BUG_ON with error handling code")
Cc: stable <stable@vger.kernel.org>
Acked-by: Tyler Hicks <code@tyhicks.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-49-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ecryptfs/crypto.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -296,10 +296,8 @@ static int crypt_scatterlist(struct ecry
 	struct extent_crypt_result ecr;
 	int rc = 0;
 
-	if (!crypt_stat || !crypt_stat->tfm
-	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED))
-		return -EINVAL;
-
+	BUG_ON(!crypt_stat || !crypt_stat->tfm
+	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED));
 	if (unlikely(ecryptfs_verbosity > 0)) {
 		ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n",
 				crypt_stat->key_size);

[PATCH 5.10 079/104] Revert "scsi: ufs: fix a missing check of devm_reset_control_get"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d427b408c4c2ff1676966c72119a3a559f8e39b upstream.

This reverts commit 63a06181d7ce169d09843645c50fea1901bc9f0a.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit is incorrect, it does not properly clean up on the
error path, so I'll keep the revert and fix it up properly with a
follow-on patch.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: 63a06181d7ce ("scsi: ufs: fix a missing check of devm_reset_control_get")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-31-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs-hisi.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -479,10 +479,6 @@ static int ufs_hisi_init_common(struct u
 	ufshcd_set_variant(hba, host);
 
 	host->rst  = devm_reset_control_get(dev, "rst");
-	if (IS_ERR(host->rst)) {
-		dev_err(dev, "%s: failed to get reset control\n", __func__);
-		return PTR_ERR(host->rst);
-	}
 
 	ufs_hisi_set_pm_lvl(hba);
 

[PATCH 5.10 080/104] Revert "gdrom: fix a memory leak bug"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 257343d3ed557f11d580d0b7c515dc154f64a42b upstream.

This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix.  Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.

Cc: Wenwen Wang <wang6495@umn.edu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -863,7 +863,6 @@ static void __exit exit_gdrom(void)
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
 	kfree(gd.toc);
-	kfree(gd.cd_info);
 }
 
 module_init(init_gdrom);

[PATCH 5.10 081/104] cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

[Greg Kroah-Hartman]

From: Atul Gopinathan <atulgopinathan@gmail.com>

commit d03d1021da6fe7f46efe9f2a7335564e7c9db5ab upstream.

The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.

Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".

The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".

Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Peter Rosin <peda@axentia.se>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-28-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -831,6 +831,8 @@ static int remove_gdrom(struct platform_
 	if (gdrom_major)
 		unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
 	unregister_cdrom(gd.cd_info);
+	kfree(gd.cd_info);
+	kfree(gd.toc);
 
 	return 0;
 }
@@ -862,7 +864,6 @@ static void __exit exit_gdrom(void)
 {
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
-	kfree(gd.toc);
 }
 
 module_init(init_gdrom);

[PATCH 5.10 082/104] cdrom: gdrom: initialize global variable at init time

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9183f01b5e6e32eb3f17b5f3f8d5ad5ac9786c49 upstream.

As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems.  Fix this up by just initializing the
whole thing to 0 at probe() time.

Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.

Reported-by: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -743,6 +743,13 @@ static const struct blk_mq_ops gdrom_mq_
 static int probe_gdrom(struct platform_device *devptr)
 {
 	int err;
+
+	/*
+	 * Ensure our "one" device is initialized properly in case of previous
+	 * usages of it
+	 */
+	memset(&gd, 0, sizeof(gd));
+
 	/* Start the device */
 	if (gdrom_execute_diagnostic() != 1) {
 		pr_warn("ATA Probe for GDROM failed\n");
@@ -848,7 +855,7 @@ static struct platform_driver gdrom_driv
 static int __init init_gdrom(void)
 {
 	int rc;
-	gd.toc = NULL;
+
 	rc = platform_driver_register(&gdrom_driver);
 	if (rc)
 		return rc;

[PATCH 5.10 083/104] Revert "media: rcar_drif: fix a memory disclosure"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e465fc3846734e9489273d889f19cc17b4cf4bd upstream.

This reverts commit d39083234c60519724c6ed59509a2129fd2aed41.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: d39083234c60 ("media: rcar_drif: fix a memory disclosure")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/rcar_drif.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -915,7 +915,6 @@ static int rcar_drif_g_fmt_sdr_cap(struc
 {
 	struct rcar_drif_sdr *sdr = video_drvdata(file);
 
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	f->fmt.sdr.pixelformat = sdr->fmt->pixelformat;
 	f->fmt.sdr.buffersize = sdr->fmt->buffersize;
 

[PATCH 5.10 084/104] Revert "rtlwifi: fix a potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 68c5634c4a7278672a3bed00eb5646884257c413 upstream.

This reverts commit 765976285a8c8db3f0eb7f033829a899d0c2786e.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time.  Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -452,11 +452,6 @@ static void _rtl_init_deferred_work(stru
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
 	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
-	if (unlikely(!rtlpriv->works.rtl_wq)) {
-		pr_err("Failed to allocate work queue\n");
-		return;
-	}
-
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,

[PATCH 5.10 085/104] Revert "qlcnic: Avoid potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b95b57dfe7a142bf2446548eb7f49340fd73e78b upstream.

This reverts commit 5bf7295fe34a5251b1d241b9736af4697b590670.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1047,8 +1047,6 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
-		if (!skb)
-			break;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;

[PATCH 5.10 086/104] Revert "niu: fix missing checks of niu_pci_eeprom_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7930742d6a0ff091c85b92ef4e076432d8d8cb79 upstream.

This reverts commit 26fd962bde0b15e54234fe762d86bc0349df1de4.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The change here was incorrect.  While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,8 +8097,6 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
-		if (prop_len < 0)
-			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8143,12 +8141,8 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++) {
-				err = niu_pci_eeprom_read(np, off + i);
-				if (err >= 0)
-					*prop_buf = err;
-				++prop_buf;
-			}
+			for (i = 0; i < prop_len; i++)
+				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
 		}
 
 		start += len;

[PATCH 5.10 087/104] ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

[Greg Kroah-Hartman]

From: Du Cheng <ducheng2@gmail.com>

commit e6e337708c22f80824b82d4af645f20715730ad0 upstream.

niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.

An examination of the callstack up to niu_pci_eeprom_read shows that:

niu_pci_eeprom_read() // returns int
    niu_pci_vpd_scan_props() // returns int
        niu_pci_vpd_fetch() // returns *void*
            niu_get_invariants() // returns int

since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.

Signed-off-by: Du Cheng <ducheng2@gmail.com>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-24-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,6 +8097,8 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
+		if (prop_len < 0)
+			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8141,8 +8143,12 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++)
-				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
+			for (i = 0; i < prop_len; i++) {
+				err =  niu_pci_eeprom_read(np, off + i);
+				if (err < 0)
+					return err;
+				*prop_buf++ = err;
+			}
 		}
 
 		start += len;
@@ -8152,14 +8158,14 @@ static int niu_pci_vpd_scan_props(struct
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
-static void niu_pci_vpd_fetch(struct niu *np, u32 start)
+static int niu_pci_vpd_fetch(struct niu *np, u32 start)
 {
 	u32 offset;
 	int err;
 
 	err = niu_pci_eeprom_read16_swp(np, start + 1);
 	if (err < 0)
-		return;
+		return err;
 
 	offset = err + 3;
 
@@ -8168,12 +8174,14 @@ static void niu_pci_vpd_fetch(struct niu
 		u32 end;
 
 		err = niu_pci_eeprom_read(np, here);
+		if (err < 0)
+			return err;
 		if (err != 0x90)
-			return;
+			return -EINVAL;
 
 		err = niu_pci_eeprom_read16_swp(np, here + 1);
 		if (err < 0)
-			return;
+			return err;
 
 		here = start + offset + 3;
 		end = start + offset + err;
@@ -8181,9 +8189,12 @@ static void niu_pci_vpd_fetch(struct niu
 		offset += err;
 
 		err = niu_pci_vpd_scan_props(np, here, end);
-		if (err < 0 || err == 1)
-			return;
+		if (err < 0)
+			return err;
+		if (err == 1)
+			return -EINVAL;
 	}
+	return 0;
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
@@ -9274,8 +9285,11 @@ static int niu_get_invariants(struct niu
 		offset = niu_pci_vpd_offset(np);
 		netif_printk(np, probe, KERN_DEBUG, np->dev,
 			     "%s() VPD offset [%08x]\n", __func__, offset);
-		if (offset)
-			niu_pci_vpd_fetch(np, offset);
+		if (offset) {
+			err = niu_pci_vpd_fetch(np, offset);
+			if (err < 0)
+				return err;
+		}
 		nw64(ESPC_PIO_EN, 0);
 
 		if (np->flags & NIU_FLAGS_VPD_VALID) {

[PATCH 5.10 088/104] net: stmicro: handle clk_prepare() failure during init

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream.

In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-22-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -30,7 +30,7 @@ struct sunxi_priv_data {
 static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 {
 	struct sunxi_priv_data *gmac = priv;
-	int ret;
+	int ret = 0;
 
 	if (gmac->regulator) {
 		ret = regulator_enable(gmac->regulator);
@@ -50,10 +50,12 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		clk_prepare(gmac->tx_clk);
+		ret = clk_prepare(gmac->tx_clk);
+		if (ret && gmac->regulator)
+			regulator_disable(gmac->regulator);
 	}
 
-	return 0;
+	return ret;
 }
 
 static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)

[PATCH 5.10 089/104] scsi: ufs: handle cleanup correctly on devm_reset_control_get error

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit 2f4a784f40f8d337d6590e2e93f46429052e15ac upstream.

Move ufshcd_set_variant call in ufs_hisi_init_common to common error
section at end of the function, and then jump to this from the error
checking statements for both devm_reset_control_get and
ufs_hisi_get_resource. This fixes the original commit (63a06181d7ce)
which was reverted due to the University of Minnesota problems.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-32-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs-hisi.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -478,17 +478,24 @@ static int ufs_hisi_init_common(struct u
 	host->hba = hba;
 	ufshcd_set_variant(hba, host);
 
-	host->rst  = devm_reset_control_get(dev, "rst");
+	host->rst = devm_reset_control_get(dev, "rst");
+	if (IS_ERR(host->rst)) {
+		dev_err(dev, "%s: failed to get reset control\n", __func__);
+		err = PTR_ERR(host->rst);
+		goto error;
+	}
 
 	ufs_hisi_set_pm_lvl(hba);
 
 	err = ufs_hisi_get_resource(host);
-	if (err) {
-		ufshcd_set_variant(hba, NULL);
-		return err;
-	}
+	if (err)
+		goto error;
 
 	return 0;
+
+error:
+	ufshcd_set_variant(hba, NULL);
+	return err;
 }
 
 static int ufs_hi3660_init(struct ufs_hba *hba)

[PATCH 5.10 090/104] net: rtlwifi: properly check for alloc_workqueue() failure

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 30b0e0ee9d02b97b68705c46b41444786effc40c upstream.

If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -440,9 +440,14 @@ static void rtl_watchdog_wq_callback(str
 static void rtl_fwevt_wq_callback(struct work_struct *work);
 static void rtl_c2hcmd_wq_callback(struct work_struct *work);
 
-static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+static int _rtl_init_deferred_work(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct workqueue_struct *wq;
+
+	wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	if (!wq)
+		return -ENOMEM;
 
 	/* <1> timer */
 	timer_setup(&rtlpriv->works.watchdog_timer,
@@ -451,7 +456,8 @@ static void _rtl_init_deferred_work(stru
 		    rtl_easy_concurrent_retrytimer_callback, 0);
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
-	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	rtlpriv->works.rtl_wq = wq;
+
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
@@ -461,6 +467,7 @@ static void _rtl_init_deferred_work(stru
 			  rtl_swlps_rfon_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.fwevt_wq, rtl_fwevt_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.c2hcmd_wq, rtl_c2hcmd_wq_callback);
+	return 0;
 }
 
 void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq)
@@ -560,9 +567,7 @@ int rtl_init_core(struct ieee80211_hw *h
 	rtlmac->link_state = MAC80211_NOLINK;
 
 	/* <6> init deferred work */
-	_rtl_init_deferred_work(hw);
-
-	return 0;
+	return _rtl_init_deferred_work(hw);
 }
 EXPORT_SYMBOL_GPL(rtl_init_core);
 

[PATCH 5.10 091/104] ics932s401: fix broken handling of errors when word reading fails

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

commit a73b6a3b4109ce2ed01dbc51a6c1551a6431b53c upstream.

In commit b05ae01fdb89, someone tried to make the driver handle i2c read
errors by simply zeroing out the register contents, but for some reason
left unaltered the code that sets the cached register value the function
call return value.

The original patch was authored by a member of the Underhanded
Mangle-happy Nerds, I'm not terribly surprised.  I don't have the
hardware anymore so I can't test this, but it seems like a pretty
obvious API usage fix to me...

Fixes: b05ae01fdb89 ("misc/ics932s401: Add a missing check to i2c_smbus_read_word_data")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210428222534.GJ3122264@magnolia
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/ics932s401.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -134,7 +134,7 @@ static struct ics932s401_data *ics932s40
 	for (i = 0; i < NUM_MIRRORED_REGS; i++) {
 		temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
 		if (temp < 0)
-			data->regs[regs_to_copy[i]] = 0;
+			temp = 0;
 		data->regs[regs_to_copy[i]] = temp >> 8;
 	}
 

[PATCH 5.10 092/104] leds: lp5523: check return value of lp5xx_read and jump to cleanup code

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit 6647f7a06eb030a2384ec71f0bb2e78854afabfe upstream.

Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.

Cc: stable <stable@vger.kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,7 +305,9 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		goto out;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 5.10 093/104] qlcnic: Add null check after calling netdev_alloc_skb

[Greg Kroah-Hartman]

From: Tom Seewald <tseewald@gmail.com>

commit 84460f01cba382553199bc1361f69a872d5abed4 upstream.

The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.

Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-26-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1047,6 +1047,8 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+		if (!skb)
+			goto error;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;
@@ -1070,6 +1072,7 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 			cnt++;
 	}
 	if (cnt != i) {
+error:
 		dev_err(&adapter->pdev->dev,
 			"LB Test: failed, TX[%d], RX[%d]\n", i, cnt);
 		if (mode != QLCNIC_ILB_MODE)

[PATCH 5.10 094/104] video: hgafb: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.

The return of ioremap if not checked, and can lead to a NULL to be
assigned to hga_vram. Potentially leading to a NULL pointer
dereference.

The fix adds code to deal with this case in the error label and
changes how the hgafb_probe handles the return of hga_card_detect.

Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,6 +285,8 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
+	if (!hga_vram)
+		return -ENOMEM;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;
@@ -344,13 +346,18 @@ static int hga_card_detect(void)
 			hga_type_name = "Hercules";
 			break;
 	}
-	return 1;
+	return 0;
 error:
 	if (release_io_ports)
 		release_region(0x3b0, 12);
 	if (release_io_port)
 		release_region(0x3bf, 1);
-	return 0;
+
+	iounmap(hga_vram);
+
+	pr_err("hgafb: HGA card not detected.\n");
+
+	return -EINVAL;
 }
 
 /**
@@ -548,13 +555,11 @@ static const struct fb_ops hgafb_ops = {
 static int hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
+	int ret;
 
-	if (! hga_card_detect()) {
-		printk(KERN_INFO "hgafb: HGA card not detected.\n");
-		if (hga_vram)
-			iounmap(hga_vram);
-		return -EINVAL;
-	}
+	ret = hga_card_detect();
+	if (!ret)
+		return ret;
 
 	printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
 		hga_type_name, hga_vram_len/1024);

[PATCH 5.10 095/104] vgacon: Record video mode changes with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream.

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/vgacon.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1108,12 +1108,20 @@ static int vgacon_resize(struct vc_data
 	if ((width << 1) * height > vga_vram_size)
 		return -EINVAL;
 
+	if (user) {
+		/*
+		 * Ho ho!  Someone (svgatextmode, eh?) may have reprogrammed
+		 * the video mode!  Set the new defaults then and go away.
+		 */
+		screen_info.orig_video_cols = width;
+		screen_info.orig_video_lines = height;
+		vga_default_font_height = c->vc_font.height;
+		return 0;
+	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
 	    c->vc_font.height)
-		/* let svgatextmode tinker with video timings and
-		   return success */
-		return (user) ? 0 : -EINVAL;
+		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
 		vgacon_doresize(c, width, height);

[PATCH 5.10 096/104] vt_ioctl: Revert VT_RESIZEX parameter handling removal

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit a90c275eb144c1b755f04769e1f29d832d6daeaf upstream.

Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.

As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank.  The proportions change according to
text mode geometries chosen.

Revert the change verbatim then, bringing back previous VT resizing.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |   57 +++++++++++++++++++++++++++++++++++++---------
 1 file changed, 47 insertions(+), 10 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -771,21 +771,58 @@ static int vt_resizex(struct vc_data *vc
 	if (copy_from_user(&v, cs, sizeof(struct vt_consize)))
 		return -EFAULT;
 
-	if (v.v_vlin)
-		pr_info_once("\"struct vt_consize\"->v_vlin is ignored. Please report if you need this.\n");
-	if (v.v_clin)
-		pr_info_once("\"struct vt_consize\"->v_clin is ignored. Please report if you need this.\n");
+	/* FIXME: Should check the copies properly */
+	if (!v.v_vlin)
+		v.v_vlin = vc->vc_scan_lines;
+
+	if (v.v_clin) {
+		int rows = v.v_vlin / v.v_clin;
+		if (v.v_rows != rows) {
+			if (v.v_rows) /* Parameters don't add up */
+				return -EINVAL;
+			v.v_rows = rows;
+		}
+	}
+
+	if (v.v_vcol && v.v_ccol) {
+		int cols = v.v_vcol / v.v_ccol;
+		if (v.v_cols != cols) {
+			if (v.v_cols)
+				return -EINVAL;
+			v.v_cols = cols;
+		}
+	}
+
+	if (v.v_clin > 32)
+		return -EINVAL;
 
-	console_lock();
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
-		vc = vc_cons[i].d;
+		struct vc_data *vcp;
+
+		if (!vc_cons[i].d)
+			continue;
+		console_lock();
+		vcp = vc_cons[i].d;
+		if (vcp) {
+			int ret;
+			int save_scan_lines = vcp->vc_scan_lines;
+			int save_font_height = vcp->vc_font.height;
 
-		if (vc) {
-			vc->vc_resize_user = 1;
-			vc_resize(vc, v.v_cols, v.v_rows);
+			if (v.v_vlin)
+				vcp->vc_scan_lines = v.v_vlin;
+			if (v.v_clin)
+				vcp->vc_font.height = v.v_clin;
+			vcp->vc_resize_user = 1;
+			ret = vc_resize(vcp, v.v_cols, v.v_rows);
+			if (ret) {
+				vcp->vc_scan_lines = save_scan_lines;
+				vcp->vc_font.height = save_font_height;
+				console_unlock();
+				return ret;
+			}
 		}
+		console_unlock();
 	}
-	console_unlock();
 
 	return 0;
 }

[PATCH 5.10 097/104] vt: Fix character height handling with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.


[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c      |    6 ++---
 drivers/video/console/vgacon.c |   44 ++++++++++++++++++++---------------------
 include/linux/console_struct.h |    1 
 3 files changed, 26 insertions(+), 25 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -806,17 +806,17 @@ static int vt_resizex(struct vc_data *vc
 		if (vcp) {
 			int ret;
 			int save_scan_lines = vcp->vc_scan_lines;
-			int save_font_height = vcp->vc_font.height;
+			int save_cell_height = vcp->vc_cell_height;
 
 			if (v.v_vlin)
 				vcp->vc_scan_lines = v.v_vlin;
 			if (v.v_clin)
-				vcp->vc_font.height = v.v_clin;
+				vcp->vc_cell_height = v.v_clin;
 			vcp->vc_resize_user = 1;
 			ret = vc_resize(vcp, v.v_cols, v.v_rows);
 			if (ret) {
 				vcp->vc_scan_lines = save_scan_lines;
-				vcp->vc_font.height = save_font_height;
+				vcp->vc_cell_height = save_cell_height;
 				console_unlock();
 				return ret;
 			}
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -384,7 +384,7 @@ static void vgacon_init(struct vc_data *
 		vc_resize(c, vga_video_num_columns, vga_video_num_lines);
 
 	c->vc_scan_lines = vga_scan_lines;
-	c->vc_font.height = vga_video_font_height;
+	c->vc_font.height = c->vc_cell_height = vga_video_font_height;
 	c->vc_complement_mask = 0x7700;
 	if (vga_512_chars)
 		c->vc_hi_font_mask = 0x0800;
@@ -519,32 +519,32 @@ static void vgacon_cursor(struct vc_data
 		switch (CUR_SIZE(c->vc_cursor_type)) {
 		case CUR_UNDERLINE:
 			vgacon_set_cursor_size(c->state.x,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 2 : 3),
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_TWO_THIRDS:
 			vgacon_set_cursor_size(c->state.x,
-					       c->vc_font.height / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_THIRD:
 			vgacon_set_cursor_size(c->state.x,
-					       (c->vc_font.height * 2) / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       (c->vc_cell_height * 2) / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_HALF:
 			vgacon_set_cursor_size(c->state.x,
-					       c->vc_font.height / 2,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 2,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_NONE:
@@ -555,7 +555,7 @@ static void vgacon_cursor(struct vc_data
 			break;
 		default:
 			vgacon_set_cursor_size(c->state.x, 1,
-					       c->vc_font.height);
+					       c->vc_cell_height);
 			break;
 		}
 		break;
@@ -566,13 +566,13 @@ static int vgacon_doresize(struct vc_dat
 		unsigned int width, unsigned int height)
 {
 	unsigned long flags;
-	unsigned int scanlines = height * c->vc_font.height;
+	unsigned int scanlines = height * c->vc_cell_height;
 	u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
 
 	raw_spin_lock_irqsave(&vga_lock, flags);
 
 	vgacon_xres = width * VGA_FONTWIDTH;
-	vgacon_yres = height * c->vc_font.height;
+	vgacon_yres = height * c->vc_cell_height;
 	if (vga_video_type >= VIDEO_TYPE_VGAC) {
 		outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
 		max_scan = inb_p(vga_video_port_val);
@@ -627,9 +627,9 @@ static int vgacon_doresize(struct vc_dat
 static int vgacon_switch(struct vc_data *c)
 {
 	int x = c->vc_cols * VGA_FONTWIDTH;
-	int y = c->vc_rows * c->vc_font.height;
+	int y = c->vc_rows * c->vc_cell_height;
 	int rows = screen_info.orig_video_lines * vga_default_font_height/
-		c->vc_font.height;
+		c->vc_cell_height;
 	/*
 	 * We need to save screen size here as it's the only way
 	 * we can spot the screen has been resized and we need to
@@ -1060,7 +1060,7 @@ static int vgacon_adjust_height(struct v
 				cursor_size_lastto = 0;
 				c->vc_sw->con_cursor(c, CM_DRAW);
 			}
-			c->vc_font.height = fontheight;
+			c->vc_font.height = c->vc_cell_height = fontheight;
 			vc_resize(c, 0, rows);	/* Adjust console size */
 		}
 	}
@@ -1115,12 +1115,12 @@ static int vgacon_resize(struct vc_data
 		 */
 		screen_info.orig_video_cols = width;
 		screen_info.orig_video_lines = height;
-		vga_default_font_height = c->vc_font.height;
+		vga_default_font_height = c->vc_cell_height;
 		return 0;
 	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
-	    c->vc_font.height)
+	    c->vc_cell_height)
 		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -101,6 +101,7 @@ struct vc_data {
 	unsigned int	vc_rows;
 	unsigned int	vc_size_row;		/* Bytes per row */
 	unsigned int	vc_scan_lines;		/* # of scan lines */
+	unsigned int	vc_cell_height;		/* CRTC character cell height */
 	unsigned long	vc_origin;		/* [!] Start of real screen */
 	unsigned long	vc_scr_end;		/* [!] End of real screen */
 	unsigned long	vc_visible_origin;	/* [!] Top of visible window */

[PATCH 5.10 098/104] tty: vt: always invoke vc->vc_sw->con_resize callback

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream.

syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.

----------
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  #include <linux/kd.h>
  #include <linux/vt.h>

  int main(int argc, char *argv[])
  {
        const int fd = open("/dev/char/4:1", O_RDWR);
        struct vt_sizes vt = { 0x4100, 2 };

        ioctl(fd, KDSETMODE, KD_GRAPHICS);
        ioctl(fd, VT_RESIZE, &vt);
        ioctl(fd, KDSETMODE, KD_TEXT);
        return 0;
  }
----------

Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().

Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1]
Reported-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c              |    2 +-
 drivers/video/fbdev/core/fbcon.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1172,7 +1172,7 @@ static inline int resize_screen(struct v
 	/* Resizes the resolution of the display adapater */
 	int err = 0;
 
-	if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_resize)
+	if (vc->vc_sw->con_resize)
 		err = vc->vc_sw->con_resize(vc, width, height, user);
 
 	return err;
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2031,7 +2031,7 @@ static int fbcon_resize(struct vc_data *
 			return -EINVAL;
 
 		DPRINTK("resize now %ix%i\n", var.xres, var.yres);
-		if (con_is_visible(vc)) {
+		if (con_is_visible(vc) && vc->vc_mode == KD_TEXT) {
 			var.activate = FB_ACTIVATE_NOW |
 				FB_ACTIVATE_FORCE;
 			fb_set_var(info, &var);

[PATCH 5.10 099/104] drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7

[Greg Kroah-Hartman]

From: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>

commit 023dfa9602f561952c0e19d74f66614a56d7e57a upstream.

When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.

Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-by: Manuel Bentele <development@manuel-bentele.de>
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
(cherry picked from commit 929b734ad34b717d6a1b8de97f53bb5616040147)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/gt/gen7_renderclear.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/gt/gen7_renderclear.c
+++ b/drivers/gpu/drm/i915/gt/gen7_renderclear.c
@@ -397,7 +397,10 @@ static void emit_batch(struct i915_vma *
 	gen7_emit_pipeline_invalidate(&cmds);
 	batch_add(&cmds, MI_LOAD_REGISTER_IMM(2));
 	batch_add(&cmds, i915_mmio_reg_offset(CACHE_MODE_0_GEN7));
-	batch_add(&cmds, 0xffff0000);
+	batch_add(&cmds, 0xffff0000 |
+			((IS_IVB_GT1(i915) || IS_VALLEYVIEW(i915)) ?
+			 HIZ_RAW_STALL_OPT_DISABLE :
+			 0));
 	batch_add(&cmds, i915_mmio_reg_offset(CACHE_MODE_1));
 	batch_add(&cmds, 0xffff0000 | PIXEL_SUBSPAN_COLLECT_OPT_DISABLE);
 	gen7_emit_pipeline_invalidate(&cmds);

[PATCH 5.10 100/104] openrisc: mm/init.c: remove unused memblock_region variable in map_ram()

[Greg Kroah-Hartman]

From: Mike Rapoport <rppt@linux.ibm.com>

commit 4eff124347191d1548eb4e14e20e77513dcbd0fe upstream.

Kernel test robot reports:

cppcheck possible warnings: (new ones prefixed by >>, may not real problems)

>> arch/openrisc/mm/init.c:125:10: warning: Uninitialized variable: region [uninitvar]
            region->base, region->base + region->size);
            ^

Replace usage of memblock_region fields with 'start' and 'end' variables
that are initialized in for_each_mem_range() and remove the declaration of
region.

Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/openrisc/mm/init.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/openrisc/mm/init.c
+++ b/arch/openrisc/mm/init.c
@@ -76,7 +76,6 @@ static void __init map_ram(void)
 	/* These mark extents of read-only kernel pages...
 	 * ...from vmlinux.lds.S
 	 */
-	struct memblock_region *region;
 
 	v = PAGE_OFFSET;
 
@@ -122,7 +121,7 @@ static void __init map_ram(void)
 		}
 
 		printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
-		       region->base, region->base + region->size);
+		       start, end);
 	}
 }
 

[PATCH 5.10 101/104] x86/Xen: swap NX determination and GDT setup on BSP

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit ae897fda4f507e4b239f0bdfd578b3688ca96fb4 upstream.

xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.

[jgross] Note that this is a revert of 36104cb9012a82e73 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.

Cc: <stable.vger.kernel.org> # 5.9
Fixes: 36104cb9012a82e73 ("x86/xen: Delay get_cpu_cap until stack canary is established")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Link: https://lore.kernel.org/r/12a866b0-9e89-59f7-ebeb-a2a6cec0987a@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
---
 arch/x86/xen/enlighten_pv.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1262,16 +1262,16 @@ asmlinkage __visible void __init xen_sta
 	/* Get mfn list */
 	xen_build_dynamic_phys_to_machine();
 
+	/* Work out if we support NX */
+	get_cpu_cap(&boot_cpu_data);
+	x86_configure_nx();
+
 	/*
 	 * Set up kernel GDT and segment registers, mainly so that
 	 * -fstack-protector code can be executed.
 	 */
 	xen_setup_gdt(0);
 
-	/* Work out if we support NX */
-	get_cpu_cap(&boot_cpu_data);
-	x86_configure_nx();
-
 	/* Determine virtual and physical address sizes */
 	get_cpu_address_sizes(&boot_cpu_data);
 

[PATCH 5.10 102/104] nvme-multipath: fix double initialization of ANA state

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

commit 5e1f689913a4498e3081093670ef9d85b2c60920 upstream.

nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields.  Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.

Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/core.c      |    3 +-
 drivers/nvme/host/multipath.c |   55 ++++++++++++++++++++++--------------------
 drivers/nvme/host/nvme.h      |    8 ++++--
 3 files changed, 37 insertions(+), 29 deletions(-)

--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3131,7 +3131,7 @@ int nvme_init_identify(struct nvme_ctrl
 		ctrl->hmmaxd = le16_to_cpu(id->hmmaxd);
 	}
 
-	ret = nvme_mpath_init(ctrl, id);
+	ret = nvme_mpath_init_identify(ctrl, id);
 	kfree(id);
 
 	if (ret < 0)
@@ -4517,6 +4517,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctr
 		min(default_ps_max_latency_us, (unsigned long)S32_MAX));
 
 	nvme_fault_inject_init(&ctrl->fault_inject, dev_name(ctrl->device));
+	nvme_mpath_init_ctrl(ctrl);
 
 	return 0;
 out_free_name:
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -708,9 +708,18 @@ void nvme_mpath_remove_disk(struct nvme_
 	put_disk(head->disk);
 }
 
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
 {
-	int error;
+	mutex_init(&ctrl->ana_lock);
+	timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
+	INIT_WORK(&ctrl->ana_work, nvme_ana_work);
+}
+
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+{
+	size_t max_transfer_size = ctrl->max_hw_sectors << SECTOR_SHIFT;
+	size_t ana_log_size;
+	int error = 0;
 
 	/* check if multipath is enabled and we have the capability */
 	if (!multipath || !ctrl->subsys ||
@@ -722,37 +731,31 @@ int nvme_mpath_init(struct nvme_ctrl *ct
 	ctrl->nanagrpid = le32_to_cpu(id->nanagrpid);
 	ctrl->anagrpmax = le32_to_cpu(id->anagrpmax);
 
-	mutex_init(&ctrl->ana_lock);
-	timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
-	ctrl->ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
-		ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc);
-	ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32);
-
-	if (ctrl->ana_log_size > ctrl->max_hw_sectors << SECTOR_SHIFT) {
+	ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
+		ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc) +
+		ctrl->max_namespaces * sizeof(__le32);
+	if (ana_log_size > max_transfer_size) {
 		dev_err(ctrl->device,
-			"ANA log page size (%zd) larger than MDTS (%d).\n",
-			ctrl->ana_log_size,
-			ctrl->max_hw_sectors << SECTOR_SHIFT);
+			"ANA log page size (%zd) larger than MDTS (%zd).\n",
+			ana_log_size, max_transfer_size);
 		dev_err(ctrl->device, "disabling ANA support.\n");
-		return 0;
+		goto out_uninit;
 	}
-
-	INIT_WORK(&ctrl->ana_work, nvme_ana_work);
-	kfree(ctrl->ana_log_buf);
-	ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
-	if (!ctrl->ana_log_buf) {
-		error = -ENOMEM;
-		goto out;
+	if (ana_log_size > ctrl->ana_log_size) {
+		nvme_mpath_stop(ctrl);
+		kfree(ctrl->ana_log_buf);
+		ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
+		if (!ctrl->ana_log_buf)
+			return -ENOMEM;
 	}
-
+	ctrl->ana_log_size = ana_log_size;
 	error = nvme_read_ana_log(ctrl);
 	if (error)
-		goto out_free_ana_log_buf;
+		goto out_uninit;
 	return 0;
-out_free_ana_log_buf:
-	kfree(ctrl->ana_log_buf);
-	ctrl->ana_log_buf = NULL;
-out:
+
+out_uninit:
+	nvme_mpath_uninit(ctrl);
 	return error;
 }
 
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -654,7 +654,8 @@ void nvme_kick_requeue_lists(struct nvme
 int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
 void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id);
 void nvme_mpath_remove_disk(struct nvme_ns_head *head);
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl);
 void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
 void nvme_mpath_stop(struct nvme_ctrl *ctrl);
 bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
@@ -730,7 +731,10 @@ static inline void nvme_trace_bio_comple
         blk_status_t status)
 {
 }
-static inline int nvme_mpath_init(struct nvme_ctrl *ctrl,
+static inline void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
+{
+}
+static inline int nvme_mpath_init_identify(struct nvme_ctrl *ctrl,
 		struct nvme_id_ctrl *id)
 {
 	if (ctrl->subsys->cmic & (1 << 3))

[PATCH 5.10 103/104] rtc: pcf85063: fallback to parent of_node

[Greg Kroah-Hartman]

From: Francois Gervais <fgervais@distech-controls.com>

commit 03531606ef4cda25b629f500d1ffb6173b805c05 upstream.

The rtc device node is always NULL.

Since v5.12-rc1-dontuse/3c9ea42802a1fbf7ef29660ff8c6e526c58114f6 this
will lead to a NULL pointer dereference.

To fix this use the parent node which is the i2c client node as set by
devm_rtc_allocate_device().

Using the i2c client node seems to be what other similar drivers do
e.g. rtc-pcf8563.c.

Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210310211026.27299-1-fgervais@distech-controls.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-pcf85063.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -486,6 +486,7 @@ static struct clk *pcf85063_clkout_regis
 {
 	struct clk *clk;
 	struct clk_init_data init;
+	struct device_node *node = pcf85063->rtc->dev.parent->of_node;
 
 	init.name = "pcf85063-clkout";
 	init.ops = &pcf85063_clkout_ops;
@@ -495,15 +496,13 @@ static struct clk *pcf85063_clkout_regis
 	pcf85063->clkout_hw.init = &init;
 
 	/* optional override of the clockname */
-	of_property_read_string(pcf85063->rtc->dev.of_node,
-				"clock-output-names", &init.name);
+	of_property_read_string(node, "clock-output-names", &init.name);
 
 	/* register the clock */
 	clk = devm_clk_register(&pcf85063->rtc->dev, &pcf85063->clkout_hw);
 
 	if (!IS_ERR(clk))
-		of_clk_add_provider(pcf85063->rtc->dev.of_node,
-				    of_clk_src_simple_get, clk);
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 
 	return clk;
 }

[PATCH 5.10 104/104] x86/boot/compressed/64: Check SEV encryption in the 32-bit boot-path

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit fef81c86262879d4b1176ef51a834c15b805ebb9 upstream.

Check whether the hypervisor reported the correct C-bit when running
as an SEV guest. Using a wrong C-bit position could be used to leak
sensitive data from the guest to the hypervisor.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210312123824.306-8-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/boot/compressed/head_64.S |   85 +++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -172,11 +172,21 @@ SYM_FUNC_START(startup_32)
 	 */
 	call	get_sev_encryption_bit
 	xorl	%edx, %edx
+#ifdef	CONFIG_AMD_MEM_ENCRYPT
 	testl	%eax, %eax
 	jz	1f
 	subl	$32, %eax	/* Encryption bit is always above bit 31 */
 	bts	%eax, %edx	/* Set encryption mask for page tables */
+	/*
+	 * Mark SEV as active in sev_status so that startup32_check_sev_cbit()
+	 * will do a check. The sev_status memory will be fully initialized
+	 * with the contents of MSR_AMD_SEV_STATUS later in
+	 * set_sev_encryption_mask(). For now it is sufficient to know that SEV
+	 * is active.
+	 */
+	movl	$1, rva(sev_status)(%ebp)
 1:
+#endif
 
 	/* Initialize Page tables to 0 */
 	leal	rva(pgtable)(%ebx), %edi
@@ -261,6 +271,9 @@ SYM_FUNC_START(startup_32)
 	movl	%esi, %edx
 1:
 #endif
+	/* Check if the C-bit position is correct when SEV is active */
+	call	startup32_check_sev_cbit
+
 	pushl	$__KERNEL_CS
 	pushl	%eax
 
@@ -787,6 +800,78 @@ SYM_DATA_END(loaded_image_proto)
 #endif
 
 /*
+ * Check for the correct C-bit position when the startup_32 boot-path is used.
+ *
+ * The check makes use of the fact that all memory is encrypted when paging is
+ * disabled. The function creates 64 bits of random data using the RDRAND
+ * instruction. RDRAND is mandatory for SEV guests, so always available. If the
+ * hypervisor violates that the kernel will crash right here.
+ *
+ * The 64 bits of random data are stored to a memory location and at the same
+ * time kept in the %eax and %ebx registers. Since encryption is always active
+ * when paging is off the random data will be stored encrypted in main memory.
+ *
+ * Then paging is enabled. When the C-bit position is correct all memory is
+ * still mapped encrypted and comparing the register values with memory will
+ * succeed. An incorrect C-bit position will map all memory unencrypted, so that
+ * the compare will use the encrypted random data and fail.
+ */
+	__HEAD
+	.code32
+SYM_FUNC_START(startup32_check_sev_cbit)
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	pushl	%eax
+	pushl	%ebx
+	pushl	%ecx
+	pushl	%edx
+
+	/* Check for non-zero sev_status */
+	movl	rva(sev_status)(%ebp), %eax
+	testl	%eax, %eax
+	jz	4f
+
+	/*
+	 * Get two 32-bit random values - Don't bail out if RDRAND fails
+	 * because it is better to prevent forward progress if no random value
+	 * can be gathered.
+	 */
+1:	rdrand	%eax
+	jnc	1b
+2:	rdrand	%ebx
+	jnc	2b
+
+	/* Store to memory and keep it in the registers */
+	movl	%eax, rva(sev_check_data)(%ebp)
+	movl	%ebx, rva(sev_check_data+4)(%ebp)
+
+	/* Enable paging to see if encryption is active */
+	movl	%cr0, %edx			 /* Backup %cr0 in %edx */
+	movl	$(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */
+	movl	%ecx, %cr0
+
+	cmpl	%eax, rva(sev_check_data)(%ebp)
+	jne	3f
+	cmpl	%ebx, rva(sev_check_data+4)(%ebp)
+	jne	3f
+
+	movl	%edx, %cr0	/* Restore previous %cr0 */
+
+	jmp	4f
+
+3:	/* Check failed - hlt the machine */
+	hlt
+	jmp	3b
+
+4:
+	popl	%edx
+	popl	%ecx
+	popl	%ebx
+	popl	%eax
+#endif
+	ret
+SYM_FUNC_END(startup32_check_sev_cbit)
+
+/*
  * Stack and heap for uncompression
  */
 	.bss

RE: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Fox Chen]

On Mon, 24 May 2021 17:24:55 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.40-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Florian Fainelli]

On 5/24/21 8:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Shuah Khan]

On 5/24/21 9:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Naresh Kamboju]

On Mon, 24 May 2021 at 21:09, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.40-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: d8d2794a2bd357476a82c4d315ba323557fd5c80
* git describe: v5.10.39-105-gd8d2794a2bd3
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.39-105-gd8d2794a2bd3

## No regressions (compared to v5.10.39-105-gd60ecece01f3)

## No fixes (compared to v5.10.39-105-gd60ecece01f3)

## Test result summary
 total: 82881, pass: 68064, fail: 2523, skip: 11584, xfail: 710,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Patch regression - Re: [PATCH 5.10 070/104] dm snapshot: fix a crash when an origin has no snapshots

[Mikulas Patocka]

Hi Greg

I'd like to ask you to drop this patch from all stable branches.

It causes regression with snapshot merging and the regression is much 
worse than the bug that it fixes.

Mikulas



On Mon, 24 May 2021, Greg Kroah-Hartman wrote:

> From: Mikulas Patocka <mpatocka@redhat.com>
> 
> commit 7ee06ddc4038f936b0d4459d37a7d4d844fb03db upstream.
> 
> If an origin target has no snapshots, o->split_boundary is set to 0.
> This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
> 
> Fix this by initializing chunk_size, and in turn split_boundary, to
> rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
> into "unsigned" type.
> 
> Reported-by: Michael Tokarev <mjt@tls.msk.ru>
> Tested-by: Michael Tokarev <mjt@tls.msk.ru>
> Cc: stable@vger.kernel.org
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/md/dm-snap.c |    5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> --- a/drivers/md/dm-snap.c
> +++ b/drivers/md/dm-snap.c
> @@ -854,12 +854,11 @@ static int dm_add_exception(void *contex
>  static uint32_t __minimum_chunk_size(struct origin *o)
>  {
>  	struct dm_snapshot *snap;
> -	unsigned chunk_size = 0;
> +	unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
>  
>  	if (o)
>  		list_for_each_entry(snap, &o->snapshots, list)
> -			chunk_size = min_not_zero(chunk_size,
> -						  snap->store->chunk_size);
> +			chunk_size = min(chunk_size, snap->store->chunk_size);
>  
>  	return (uint32_t) chunk_size;
>  }
> 
> 

Re: Patch regression - Re: [PATCH 5.10 070/104] dm snapshot: fix a crash when an origin has no snapshots

[Greg Kroah-Hartman]

On Tue, May 25, 2021 at 07:36:57AM -0400, Mikulas Patocka wrote:
> Hi Greg
> 
> I'd like to ask you to drop this patch from all stable branches.
> 
> It causes regression with snapshot merging and the regression is much 
> worse than the bug that it fixes.

Sure, but is there a fix in Linus's branch for this that I should take
instead, or is it reverted in linux-next already?

thanks,

greg k-h

Re: Patch regression - Re: [PATCH 5.10 070/104] dm snapshot: fix a crash when an origin has no snapshots

[Mikulas Patocka]

On Tue, 25 May 2021, Greg Kroah-Hartman wrote:

> On Tue, May 25, 2021 at 07:36:57AM -0400, Mikulas Patocka wrote:
> > Hi Greg
> > 
> > I'd like to ask you to drop this patch from all stable branches.
> > 
> > It causes regression with snapshot merging and the regression is much 
> > worse than the bug that it fixes.
> 
> Sure, but is there a fix in Linus's branch for this that I should take
> instead, or is it reverted in linux-next already?
> 
> thanks,
> 
> greg k-h

There is no fix now - but the bug that this fixed is minor (it fixes a 
crash in a configuration that is never set by lvm2) - and the regression 
is major (snapshot merging doesn't work).

I'll work with Mike on reverting it a providing a proper fix.

Mikulas

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, May 24, 2021 at 05:24:55PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210523): 63 configs -> no failure
arm (gcc version 11.1.1 20210523): 105 configs -> no new failure
arm64 (gcc version 11.1.1 20210523): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm64: Booted on rpi4b(4GB). No regression.

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 665 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel


-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Guenter Roeck]

On Mon, May 24, 2021 at 05:24:55PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 455 pass: 455 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 000/104] 5.10.40-rc1 review

[Samuel Zou]

On 2021/5/24 23:24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.40 release.
> There are 104 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.40-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.40-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.40-rc1
Commit: d8d2794a2bd357476a82c4d315ba323557fd5c80
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8896
passed: 8896
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8896
passed: 8896
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>