linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format
@ 2021-05-27 10:25 Jamin Lin
  2021-05-27 10:25 ` [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt " Jamin Lin
  0 siblings, 1 reply; 6+ messages in thread
From: Jamin Lin @ 2021-05-27 10:25 UTC (permalink / raw)
  To: Rob Herring, Joel Stanley, Andrew Jeffery, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER
  Cc: ryan_chen, chin-ting_kuo, troy_lee, steven_lee

Change review issue since v1
1. add multi-master to boolean type property
2. add maxItems to reset and clock property

Jamin Lin (1):
  dt-bindings: aspeed-i2c: Convert txt to yaml format

 .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
 .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
 2 files changed, 86 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

-- 
2.17.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  2021-05-27 10:25 [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format Jamin Lin
@ 2021-05-27 10:25 ` Jamin Lin
  2021-05-27 23:20   ` Andrew Jeffery
  2021-06-02 20:17   ` Rob Herring
  0 siblings, 2 replies; 6+ messages in thread
From: Jamin Lin @ 2021-05-27 10:25 UTC (permalink / raw)
  To: Rob Herring, Joel Stanley, Andrew Jeffery, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER
  Cc: ryan_chen, chin-ting_kuo, troy_lee, steven_lee

Convert aspeed i2c to yaml.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
 .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
 2 files changed, 86 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 000000000000..1f7064d77708
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+
+maintainers:
+  - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-bus
+      - aspeed,ast2500-i2c-bus
+      - aspeed,ast2600-i2c-bus
+
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: address offset and range of bus
+      - description: address offset and range of bus buffer
+
+  interrupts:
+    maxItems: 1
+    description: interrupt number
+
+  clocks:
+    maxItems: 1
+    description:
+      root clock of bus, should reference the APB
+      clock in the second cell
+
+  reset:
+    maxItems: 1
+    description: phandle to reset controller with the reset number in
+      the second cell
+
+  bus-frequency:
+    minimum: 500
+    maximum: 4000000
+    default: 100000
+    description: frequency of the bus clock in Hz defaults to 100 kHz when not
+      specified
+
+  multi-master:
+    type: boolean
+    description:
+      states that there is another master active on this bus
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    i2c0: i2c-bus@40 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <1>;
+      reg = <0x40 0x40>;
+      compatible = "aspeed,ast2500-i2c-bus";
+      clocks = <&syscon ASPEED_CLK_APB>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+      bus-frequency = <100000>;
+      interrupts = <0>;
+      interrupt-parent = <&i2c_ic>;
+      status = "disabled";
+      /* Does not need pinctrl properties */
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb196a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells		: should be 0
-- reg			: address offset and range of bus
-- compatible		: should be "aspeed,ast2400-i2c-bus"
-			  or "aspeed,ast2500-i2c-bus"
-			  or "aspeed,ast2600-i2c-bus"
-- clocks		: root clock of bus, should reference the APB
-			  clock in the second cell
-- resets		: phandle to reset controller with the reset number in
-			  the second cell
-- interrupts		: interrupt number
-
-Optional Properties:
-- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
-		  specified
-- multi-master	: states that there is another master active on this bus.
-
-Example:
-
-i2c {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x1e78a000 0x1000>;
-
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2400-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-	};
-};
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  2021-05-27 10:25 ` [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt " Jamin Lin
@ 2021-05-27 23:20   ` Andrew Jeffery
  2021-05-28  1:44     ` Jamin Lin
  2021-06-02 20:17   ` Rob Herring
  1 sibling, 1 reply; 6+ messages in thread
From: Andrew Jeffery @ 2021-05-27 23:20 UTC (permalink / raw)
  To: Jamin Lin, Rob Herring, Joel Stanley, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER
  Cc: Ryan Chen, Chin-Ting Kuo, Troy Lee, Steven Lee



On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
>  .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
>  2 files changed, 86 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml 
> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device 
> Tree Bindings
> +
> +maintainers:
> +  - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-i2c-bus
> +      - aspeed,ast2500-i2c-bus
> +      - aspeed,ast2600-i2c-bus
> +
> +  "#size-cells":
> +    const: 0
> +
> +  "#address-cells":
> +    const: 1
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: address offset and range of bus
> +      - description: address offset and range of bus buffer
> +
> +  interrupts:
> +    maxItems: 1
> +    description: interrupt number
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      root clock of bus, should reference the APB
> +      clock in the second cell
> +
> +  reset:
> +    maxItems: 1
> +    description: phandle to reset controller with the reset number in
> +      the second cell
> +
> +  bus-frequency:
> +    minimum: 500
> +    maximum: 4000000
> +    default: 100000
> +    description: frequency of the bus clock in Hz defaults to 100 kHz 
> when not
> +      specified
> +
> +  multi-master:
> +    type: boolean
> +    description:
> +      states that there is another master active on this bus
> +
> +required:
> +  - reg
> +  - compatible
> +  - clocks
> +  - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    i2c0: i2c-bus@40 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #interrupt-cells = <1>;
> +      reg = <0x40 0x40>;
> +      compatible = "aspeed,ast2500-i2c-bus";
> +      clocks = <&syscon ASPEED_CLK_APB>;
> +      resets = <&syscon ASPEED_RESET_I2C>;
> +      bus-frequency = <100000>;
> +      interrupts = <0>;
> +      interrupt-parent = <&i2c_ic>;
> +      status = "disabled";
> +      /* Does not need pinctrl properties */

Note this actually isn't right and someone (me?) needs to send a patch 
to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just 
don't have a group, and so SCL and SDA need to be muxed individually.

I expect we wound up with this comment by a lack of a match for an 
erroneous grep.

Andrew

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  2021-05-27 23:20   ` Andrew Jeffery
@ 2021-05-28  1:44     ` Jamin Lin
  0 siblings, 0 replies; 6+ messages in thread
From: Jamin Lin @ 2021-05-28  1:44 UTC (permalink / raw)
  To: Andrew Jeffery
  Cc: Rob Herring, Joel Stanley, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
	Troy Lee, Steven Lee

The 05/27/2021 23:20, Andrew Jeffery wrote:
> 
> 
> On Thu, 27 May 2021, at 19:55, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> > 
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
> >  .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
> >  2 files changed, 86 insertions(+), 49 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml 
> > b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device 
> > Tree Bindings
> > +
> > +maintainers:
> > +  - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > +  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - aspeed,ast2400-i2c-bus
> > +      - aspeed,ast2500-i2c-bus
> > +      - aspeed,ast2600-i2c-bus
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: address offset and range of bus
> > +      - description: address offset and range of bus buffer
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +    description: interrupt number
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description:
> > +      root clock of bus, should reference the APB
> > +      clock in the second cell
> > +
> > +  reset:
> > +    maxItems: 1
> > +    description: phandle to reset controller with the reset number in
> > +      the second cell
> > +
> > +  bus-frequency:
> > +    minimum: 500
> > +    maximum: 4000000
> > +    default: 100000
> > +    description: frequency of the bus clock in Hz defaults to 100 kHz 
> > when not
> > +      specified
> > +
> > +  multi-master:
> > +    type: boolean
> > +    description:
> > +      states that there is another master active on this bus
> > +
> > +required:
> > +  - reg
> > +  - compatible
> > +  - clocks
> > +  - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/aspeed-clock.h>
> > +    i2c0: i2c-bus@40 {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      #interrupt-cells = <1>;
> > +      reg = <0x40 0x40>;
> > +      compatible = "aspeed,ast2500-i2c-bus";
> > +      clocks = <&syscon ASPEED_CLK_APB>;
> > +      resets = <&syscon ASPEED_RESET_I2C>;
> > +      bus-frequency = <100000>;
> > +      interrupts = <0>;
> > +      interrupt-parent = <&i2c_ic>;
> > +      status = "disabled";
> > +      /* Does not need pinctrl properties */
> 
> Note this actually isn't right and someone (me?) needs to send a patch 
> to fix the devicetree(s) - the I2C mux properties for bus 0 and 1 just 
> don't have a group, and so SCL and SDA need to be muxed individually.
> 
> I expect we wound up with this comment by a lack of a match for an 
> erroneous grep.
> 
> Andrew
Understand. Can I change the example as the following or can you give me
any suggestion?

i2c0: i2c-bus@40 {
  #address-cells = <1>;
  #size-cells = <0>;
  #interrupt-cells = <1>;
  reg = <0x40 0x40>;
  compatible = "aspeed,ast2500-i2c-bus";
  clocks = <&syscon ASPEED_CLK_APB>;
  resets = <&syscon ASPEED_RESET_I2C>;
  bus-frequency = <100000>;
  interrupts = <0>;
  interrupt-parent = <&i2c_ic>;

Thanks-Jamin

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  2021-05-27 10:25 ` [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt " Jamin Lin
  2021-05-27 23:20   ` Andrew Jeffery
@ 2021-06-02 20:17   ` Rob Herring
  2021-06-03  1:46     ` Jamin Lin
  1 sibling, 1 reply; 6+ messages in thread
From: Rob Herring @ 2021-06-02 20:17 UTC (permalink / raw)
  To: Jamin Lin
  Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER, ryan_chen, chin-ting_kuo,
	troy_lee, steven_lee

On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> Convert aspeed i2c to yaml.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
>  .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
>  2 files changed, 86 insertions(+), 49 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> new file mode 100644
> index 000000000000..1f7064d77708
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> +
> +maintainers:
> +  - Rayn Chen <rayn_chen@aspeedtech.com>
> +
> +allOf:
> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-i2c-bus
> +      - aspeed,ast2500-i2c-bus
> +      - aspeed,ast2600-i2c-bus
> +
> +  "#size-cells":
> +    const: 0
> +
> +  "#address-cells":
> +    const: 1

These 2 are covered by i2c-controller.yaml.

> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: address offset and range of bus
> +      - description: address offset and range of bus buffer
> +
> +  interrupts:
> +    maxItems: 1
> +    description: interrupt number

Drop. Not a useful description.

> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      root clock of bus, should reference the APB
> +      clock in the second cell
> +
> +  reset:

resets

> +    maxItems: 1
> +    description: phandle to reset controller with the reset number in
> +      the second cell

No need to describe the format of 'resets'.

> +
> +  bus-frequency:
> +    minimum: 500
> +    maximum: 4000000
> +    default: 100000
> +    description: frequency of the bus clock in Hz defaults to 100 kHz when not
> +      specified
> +
> +  multi-master:
> +    type: boolean
> +    description:
> +      states that there is another master active on this bus
> +
> +required:
> +  - reg
> +  - compatible
> +  - clocks
> +  - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    i2c0: i2c-bus@40 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #interrupt-cells = <1>;
> +      reg = <0x40 0x40>;
> +      compatible = "aspeed,ast2500-i2c-bus";

Convention is compatible first in the list of properties.

> +      clocks = <&syscon ASPEED_CLK_APB>;
> +      resets = <&syscon ASPEED_RESET_I2C>;
> +      bus-frequency = <100000>;
> +      interrupts = <0>;
> +      interrupt-parent = <&i2c_ic>;
> +      status = "disabled";

Don't show status in examples especially when disabling disables some 
validation...

> +      /* Does not need pinctrl properties */
> +    };

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  2021-06-02 20:17   ` Rob Herring
@ 2021-06-03  1:46     ` Jamin Lin
  0 siblings, 0 replies; 6+ messages in thread
From: Jamin Lin @ 2021-06-03  1:46 UTC (permalink / raw)
  To: Rob Herring
  Cc: Joel Stanley, Andrew Jeffery, Brendan Higgins,
	Benjamin Herrenschmidt, Rayn Chen,
	open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:ARM/ASPEED MACHINE SUPPORT,
	moderated list:ARM/ASPEED MACHINE SUPPORT, open list,
	moderated list:ARM/ASPEED I2C DRIVER, Ryan Chen, Chin-Ting Kuo,
	Troy Lee, Steven Lee

The 06/02/2021 20:17, Rob Herring wrote:
> On Thu, May 27, 2021 at 06:25:05PM +0800, Jamin Lin wrote:
> > Convert aspeed i2c to yaml.
> > 
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 86 +++++++++++++++++++
> >  .../devicetree/bindings/i2c/i2c-aspeed.txt    | 49 -----------
> >  2 files changed, 86 insertions(+), 49 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > new file mode 100644
> > index 000000000000..1f7064d77708
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
> > +
> > +maintainers:
> > +  - Rayn Chen <rayn_chen@aspeedtech.com>
> > +
> > +allOf:
> > +  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - aspeed,ast2400-i2c-bus
> > +      - aspeed,ast2500-i2c-bus
> > +      - aspeed,ast2600-i2c-bus
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +  "#address-cells":
> > +    const: 1
> 
> These 2 are covered by i2c-controller.yaml.
>
Will remove them.
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: address offset and range of bus
> > +      - description: address offset and range of bus buffer
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +    description: interrupt number
> 
> Drop. Not a useful description.
> 
Will remove it.
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description:
> > +      root clock of bus, should reference the APB
> > +      clock in the second cell
> > +
> > +  reset:
> 
> resets
> 
Thanks to find the typo.
> > +    maxItems: 1
> > +    description: phandle to reset controller with the reset number in
> > +      the second cell
> 
> No need to describe the format of 'resets'.
> 
> > +
> > +  bus-frequency:
> > +    minimum: 500
> > +    maximum: 4000000
> > +    default: 100000
> > +    description: frequency of the bus clock in Hz defaults to 100 kHz when not
> > +      specified
> > +
> > +  multi-master:
> > +    type: boolean
> > +    description:
> > +      states that there is another master active on this bus
> > +
> > +required:
> > +  - reg
> > +  - compatible
> > +  - clocks
> > +  - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/aspeed-clock.h>
> > +    i2c0: i2c-bus@40 {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      #interrupt-cells = <1>;
> > +      reg = <0x40 0x40>;
> > +      compatible = "aspeed,ast2500-i2c-bus";
> 
> Convention is compatible first in the list of properties.
>
Will move compatible first in the list of properties.
> > +      clocks = <&syscon ASPEED_CLK_APB>;
> > +      resets = <&syscon ASPEED_RESET_I2C>;
> > +      bus-frequency = <100000>;
> > +      interrupts = <0>;
> > +      interrupt-parent = <&i2c_ic>;
> > +      status = "disabled";
> 
> Don't show status in examples especially when disabling disables some 
> validation...
> 
Will remove it.
> > +      /* Does not need pinctrl properties */
> > +    };
Thanks for your suggestion. I will send v3 patch.


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-06-03  1:47 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-27 10:25 [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format Jamin Lin
2021-05-27 10:25 ` [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt " Jamin Lin
2021-05-27 23:20   ` Andrew Jeffery
2021-05-28  1:44     ` Jamin Lin
2021-06-02 20:17   ` Rob Herring
2021-06-03  1:46     ` Jamin Lin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).