[PATCH 5.10 080/252] serial: rp2: use request_firmware instead of request_firmware_nowait

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Zheyu Ma <zheyuma97@gmail.com>

commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.

In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.

Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.

This report reveals it:

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xec/0x156 lib/dump_stack.c:118
 assign_lock_key kernel/locking/lockdep.c:727 [inline]
 register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:329 [inline]
 rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
 rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
 handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS:  0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
 handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS:  0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/rp2.c |   52 +++++++++++++++--------------------------------
 1 file changed, 17 insertions(+), 35 deletions(-)

--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -195,7 +195,6 @@ struct rp2_card {
 	void __iomem			*bar0;
 	void __iomem			*bar1;
 	spinlock_t			card_lock;
-	struct completion		fw_loaded;
 };
 
 #define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -664,17 +663,10 @@ static void rp2_remove_ports(struct rp2_
 	card->initialized_ports = 0;
 }
 
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
 {
-	struct rp2_card *card = context;
 	resource_size_t phys_base;
-	int i, rc = -ENOENT;
-
-	if (!fw) {
-		dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
-			RP2_FW_NAME);
-		goto no_fw;
-	}
+	int i, rc = 0;
 
 	phys_base = pci_resource_start(card->pdev, 1);
 
@@ -720,23 +712,13 @@ static void rp2_fw_cb(const struct firmw
 		card->initialized_ports++;
 	}
 
-	release_firmware(fw);
-no_fw:
-	/*
-	 * rp2_fw_cb() is called from a workqueue long after rp2_probe()
-	 * has already returned success.  So if something failed here,
-	 * we'll just leave the now-dormant device in place until somebody
-	 * unbinds it.
-	 */
-	if (rc)
-		dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
-	complete(&card->fw_loaded);
+	return rc;
 }
 
 static int rp2_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *id)
 {
+	const struct firmware *fw;
 	struct rp2_card *card;
 	struct rp2_uart_port *ports;
 	void __iomem * const *bars;
@@ -747,7 +729,6 @@ static int rp2_probe(struct pci_dev *pde
 		return -ENOMEM;
 	pci_set_drvdata(pdev, card);
 	spin_lock_init(&card->card_lock);
-	init_completion(&card->fw_loaded);
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
@@ -780,21 +761,23 @@ static int rp2_probe(struct pci_dev *pde
 		return -ENOMEM;
 	card->ports = ports;
 
-	rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
-			      IRQF_SHARED, DRV_NAME, card);
-	if (rc)
+	rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+			RP2_FW_NAME);
 		return rc;
+	}
 
-	/*
-	 * Only catastrophic errors (e.g. ENOMEM) are reported here.
-	 * If the FW image is missing, we'll find out in rp2_fw_cb()
-	 * and print an error message.
-	 */
-	rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
-				     GFP_KERNEL, card, rp2_fw_cb);
+	rc = rp2_load_firmware(card, fw);
+
+	release_firmware(fw);
+	if (rc < 0)
+		return rc;
+
+	rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+			      IRQF_SHARED, DRV_NAME, card);
 	if (rc)
 		return rc;
-	dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
 
 	return 0;
 }
@@ -803,7 +786,6 @@ static void rp2_remove(struct pci_dev *p
 {
 	struct rp2_card *card = pci_get_drvdata(pdev);
 
-	wait_for_completion(&card->fw_loaded);
 	rp2_remove_ports(card);
 }