From: Archie Pusaka <apusaka@google.com>
To: linux-bluetooth <linux-bluetooth@vger.kernel.org>,
Marcel Holtmann <marcel@holtmann.org>
Cc: CrosBT Upstreaming <chromeos-bluetooth-upstreaming@chromium.org>,
Archie Pusaka <apusaka@chromium.org>,
Miao-chen Chou <mcchou@chromium.org>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v2 3/8] Bluetooth: use inclusive language to describe CPB
Date: Mon, 31 May 2021 16:37:22 +0800 [thread overview]
Message-ID: <20210531163500.v2.3.Icd1fee7b40dcfec866286803065a3d19dd9ca7ed@changeid> (raw)
In-Reply-To: <20210531083726.1949001-1-apusaka@google.com>
From: Archie Pusaka <apusaka@chromium.org>
This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
Specifically, these terms are replaced when describing the
connectionless peripheral broadcast feature:
master -> central
slave -> peripheral
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
---
Changes in v2:
* Add details in commit message
include/net/bluetooth/hci.h | 26 +++++++++++++-------------
include/net/bluetooth/hci_core.h | 4 ++--
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/hci_core.c | 16 ++++++++--------
4 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c3efef266d6d..a7cf5a2d87c5 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -36,7 +36,7 @@
#define HCI_MAX_AMP_ASSOC_SIZE 672
-#define HCI_MAX_CSB_DATA_SIZE 252
+#define HCI_MAX_CPB_DATA_SIZE 252
/* HCI dev events */
#define HCI_DEV_REG 1
@@ -472,10 +472,10 @@ enum {
#define LMP_EXTFEATURES 0x80
/* Extended LMP features */
-#define LMP_CSB_MASTER 0x01
-#define LMP_CSB_SLAVE 0x02
-#define LMP_SYNC_TRAIN 0x04
-#define LMP_SYNC_SCAN 0x08
+#define LMP_CPB_CENTRAL 0x01
+#define LMP_CPB_PERIPHERAL 0x02
+#define LMP_SYNC_TRAIN 0x04
+#define LMP_SYNC_SCAN 0x08
#define LMP_SC 0x01
#define LMP_PING 0x02
@@ -877,17 +877,17 @@ struct hci_rp_logical_link_cancel {
__u8 flow_spec_id;
} __packed;
-#define HCI_OP_SET_CSB 0x0441
-struct hci_cp_set_csb {
+#define HCI_OP_SET_CPB 0x0441
+struct hci_cp_set_cpb {
__u8 enable;
__u8 lt_addr;
__u8 lpo_allowed;
__le16 packet_type;
__le16 interval_min;
__le16 interval_max;
- __le16 csb_sv_tout;
+ __le16 cpb_sv_tout;
} __packed;
-struct hci_rp_set_csb {
+struct hci_rp_set_cpb {
__u8 status;
__u8 lt_addr;
__le16 interval;
@@ -1184,14 +1184,14 @@ struct hci_rp_delete_reserved_lt_addr {
__u8 lt_addr;
} __packed;
-#define HCI_OP_SET_CSB_DATA 0x0c76
-struct hci_cp_set_csb_data {
+#define HCI_OP_SET_CPB_DATA 0x0c76
+struct hci_cp_set_cpb_data {
__u8 lt_addr;
__u8 fragment;
__u8 data_length;
- __u8 data[HCI_MAX_CSB_DATA_SIZE];
+ __u8 data[HCI_MAX_CPB_DATA_SIZE];
} __packed;
-struct hci_rp_set_csb_data {
+struct hci_rp_set_cpb_data {
__u8 status;
__u8 lt_addr;
} __packed;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 368e16fdf441..929768f6ed93 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1394,8 +1394,8 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
#define lmp_edr_5slot_capable(dev) ((dev)->features[0][5] & LMP_EDR_5SLOT)
/* ----- Extended LMP capabilities ----- */
-#define lmp_csb_master_capable(dev) ((dev)->features[2][0] & LMP_CSB_MASTER)
-#define lmp_csb_slave_capable(dev) ((dev)->features[2][0] & LMP_CSB_SLAVE)
+#define lmp_cpb_central_capable(dev) ((dev)->features[2][0] & LMP_CPB_CENTRAL)
+#define lmp_cpb_peripheral_capable(dev) ((dev)->features[2][0] & LMP_CPB_PERIPHERAL)
#define lmp_sync_train_capable(dev) ((dev)->features[2][0] & LMP_SYNC_TRAIN)
#define lmp_sync_scan_capable(dev) ((dev)->features[2][0] & LMP_SYNC_SCAN)
#define lmp_sc_capable(dev) ((dev)->features[2][1] & LMP_SC)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 703470b6b924..7b8784d4da96 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1842,7 +1842,7 @@ u32 hci_conn_get_phy(struct hci_conn *conn)
/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
* Table 6.2: Packets defined for synchronous, asynchronous, and
- * CSB logical transport types.
+ * CPB logical transport types.
*/
switch (conn->type) {
case SCO_LINK:
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 4ac6022f7085..b9ebad0f8fb9 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -545,24 +545,24 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
bool changed = false;
- /* If Connectionless Slave Broadcast master role is supported
+ /* If Connectionless Peripheral Broadcast central role is supported
* enable all necessary events for it.
*/
- if (lmp_csb_master_capable(hdev)) {
+ if (lmp_cpb_central_capable(hdev)) {
events[1] |= 0x40; /* Triggered Clock Capture */
events[1] |= 0x80; /* Synchronization Train Complete */
- events[2] |= 0x10; /* Slave Page Response Timeout */
- events[2] |= 0x20; /* CSB Channel Map Change */
+ events[2] |= 0x10; /* Peripheral Page Response Timeout */
+ events[2] |= 0x20; /* CPB Channel Map Change */
changed = true;
}
- /* If Connectionless Slave Broadcast slave role is supported
+ /* If Connectionless Peripheral Broadcast peripheral role is supported
* enable all necessary events for it.
*/
- if (lmp_csb_slave_capable(hdev)) {
+ if (lmp_cpb_peripheral_capable(hdev)) {
events[2] |= 0x01; /* Synchronization Train Received */
- events[2] |= 0x02; /* CSB Receive */
- events[2] |= 0x04; /* CSB Timeout */
+ events[2] |= 0x02; /* CPB Receive */
+ events[2] |= 0x04; /* CPB Timeout */
events[2] |= 0x08; /* Truncated Page Complete */
changed = true;
}
--
2.32.0.rc0.204.g9fa02ecfa5-goog
next prev parent reply other threads:[~2021-05-31 8:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 8:37 [PATCH v2 0/8] Bluetooth: use inclusive language Archie Pusaka
2021-05-31 8:37 ` [PATCH v2 1/8] Bluetooth: use inclusive language in HCI role Archie Pusaka
2021-06-02 19:55 ` Marcel Holtmann
2021-05-31 8:37 ` [PATCH v2 2/8] Bluetooth: use inclusive language in hci_core.h Archie Pusaka
2021-05-31 8:37 ` Archie Pusaka [this message]
2021-05-31 8:37 ` [PATCH v2 4/8] Bluetooth: use inclusive language in HCI LE features Archie Pusaka
2021-05-31 8:37 ` [PATCH v2 5/8] Bluetooth: use inclusive language when tracking connections Archie Pusaka
2021-05-31 8:37 ` [PATCH v2 6/8] Bluetooth: use inclusive language in SMP Archie Pusaka
2021-05-31 8:37 ` [PATCH v2 7/8] Bluetooth: use inclusive language when filtering devices Archie Pusaka
2021-06-02 20:04 ` Marcel Holtmann
2021-05-31 8:37 ` [PATCH v2 8/8] Bluetooth: use inclusive language in comments Archie Pusaka
2021-06-02 20:04 ` [PATCH v2 0/8] Bluetooth: use inclusive language Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210531163500.v2.3.Icd1fee7b40dcfec866286803065a3d19dd9ca7ed@changeid \
--to=apusaka@google.com \
--cc=apusaka@chromium.org \
--cc=chromeos-bluetooth-upstreaming@chromium.org \
--cc=davem@davemloft.net \
--cc=johan.hedberg@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=mcchou@chromium.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).