linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Keerthy <j-keerthy@ti.com>, Tero Kristo <kristo@kernel.org>
Subject: [Backport for linux-5.4.y PATCH 4/4] ARM: OMAP2+: Handle dra7 timer wrap errata i940
Date: Wed,  2 Jun 2021 13:46:25 +0300	[thread overview]
Message-ID: <20210602104625.6079-4-tony@atomide.com> (raw)
In-Reply-To: <20210602104625.6079-1-tony@atomide.com>

Upstream commit 25de4ce5ed02994aea8bc111d133308f6fd62566 backported to
stable linux-5.4.y mach-omap2/timer instead of drivers/clocksource as
earlier kernels still depend on legacy platform code for timers. Note
that earlier stable kernels need also additional patches and will be
posted separately.

There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.

To work around the issue, we need to use timer-ti-dm percpu timers instead.

Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.

For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":

https://www.ti.com/lit/er/sprz429m/sprz429m.pdf

The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7-l4.dtsi      |  4 +--
 arch/arm/boot/dts/dra7.dtsi         | 20 +++++++++++
 arch/arm/mach-omap2/board-generic.c |  4 +--
 arch/arm/mach-omap2/timer.c         | 53 ++++++++++++++++++++++++++++-
 drivers/clk/ti/clk-7xx.c            |  1 +
 include/linux/cpuhotplug.h          |  1 +
 6 files changed, 78 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1176,7 +1176,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
@@ -1204,7 +1204,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -766,3 +767,22 @@
 
 #include "dra7-l4.dtsi"
 #include "dra7xx-clocks.dtsi"
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer4_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -327,7 +327,7 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap5_realtime_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= dra74x_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
@@ -350,7 +350,7 @@ DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap5_realtime_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= dra72x_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -42,6 +42,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 #include <linux/sched_clock.h>
+#include <linux/cpu.h>
 
 #include <asm/mach/time.h>
 
@@ -420,6 +421,53 @@ static void __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
 		timer->rate);
 }
 
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int omap_gptimer_starting_cpu(unsigned int cpu)
+{
+	struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+	struct clock_event_device *dev = &clkevt->dev;
+	struct omap_dm_timer *timer = &clkevt->timer;
+
+	clockevents_config_and_register(dev, timer->rate, 3, ULONG_MAX);
+	irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+	return 0;
+}
+
+static int __init dmtimer_percpu_quirk_init(void)
+{
+	struct dmtimer_clockevent *clkevt;
+	struct clock_event_device *dev;
+	struct device_node *arm_timer;
+	struct omap_dm_timer *timer;
+	int cpu = 0;
+
+	arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+	if (of_device_is_available(arm_timer)) {
+		pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+		return 0;
+	}
+
+	for_each_possible_cpu(cpu) {
+		clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+		dev = &clkevt->dev;
+		timer = &clkevt->timer;
+
+		dmtimer_clkevt_init_common(clkevt, 0, "timer_sys_ck",
+					   CLOCK_EVT_FEAT_ONESHOT,
+					   cpumask_of(cpu),
+					   "assigned-clock-parents",
+					   500, "percpu timer");
+	}
+
+	cpuhp_setup_state(CPUHP_AP_OMAP_DM_TIMER_STARTING,
+			  "clockevents/omap/gptimer:starting",
+			  omap_gptimer_starting_cpu, NULL);
+
+	return 0;
+}
+
 /* Clocksource code */
 static struct omap_dm_timer clksrc;
 static bool use_gptimer_clksrc __initdata;
@@ -564,6 +612,9 @@ static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src
 					3, /* Timer internal resynch latency */
 					0xffffffff);
 
+	if (soc_is_dra7xx())
+		dmtimer_percpu_quirk_init();
+
 	/* Enable the use of clocksource="gp_timer" kernel parameter */
 	if (use_gptimer_clksrc || gptimer)
 		omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
@@ -591,7 +642,7 @@ void __init omap3_secure_sync32k_timer_init(void)
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
-	defined(CONFIG_SOC_AM43XX)
+	defined(CONFIG_SOC_AM43XX) || defined(CONFIG_SOC_DRA7XX)
 void __init omap3_gptimer_timer_init(void)
 {
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -793,6 +793,7 @@ static struct ti_dt_clk dra7xx_clks[] = {
 	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
 	DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
 	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+	DT_CLK(NULL, "timer_sys_ck", "timer_sys_clk_div"),
 	DT_CLK(NULL, "atl_dpll_clk_mux", "atl-clkctrl:0000:24"),
 	DT_CLK(NULL, "atl_gfclk_mux", "atl-clkctrl:0000:26"),
 	DT_CLK(NULL, "dcan1_sys_clk_mux", "wkupaon-clkctrl:0068:24"),
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -119,6 +119,7 @@ enum cpuhp_state {
 	CPUHP_AP_ARM_L2X0_STARTING,
 	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
+	CPUHP_AP_OMAP_DM_TIMER_STARTING,
 	CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
 	CPUHP_AP_JCORE_TIMER_STARTING,
 	CPUHP_AP_ARM_TWD_STARTING,
-- 
2.31.1

      parent reply	other threads:[~2021-06-02 10:47 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02 10:46 [Backport for linux-5.4.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq() Tony Lindgren
2021-06-02 10:46 ` [Backport for linux-5.4.y PATCH 2/4] ARM: OMAP2+: Prepare timer code to backport dra7 timer wrap errata i940 Tony Lindgren
2021-06-08 17:13   ` Greg KH
2021-06-09  6:13     ` Tony Lindgren
2021-06-09  6:22       ` Greg KH
2021-06-09  6:58         ` Tony Lindgren
2021-06-09  7:31           ` Greg KH
2021-06-09  8:50             ` Tony Lindgren
2021-06-02 10:46 ` [Backport for linux-5.4.y PATCH 3/4] ARM: OMAP2+: Prepare to handle dra7 timer wrap issue Tony Lindgren
2021-06-02 10:46 ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602104625.6079-4-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=j-keerthy@ti.com \
    --cc=kristo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --subject='Re: [Backport for linux-5.4.y PATCH 4/4] ARM: OMAP2+: Handle dra7 timer wrap errata i940' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).