From: Sujit Kautkar <sujitka@chromium.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Sibi Sankar <sibis@codeaurora.org>,
Doug Anderson <dianders@chromium.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
Sujit Kautkar <sujitka@chromium.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
Date: Wed, 2 Jun 2021 12:13:39 -0700 [thread overview]
Message-ID: <20210602121313.v3.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid> (raw)
In-Reply-To: <20210602191338.1995827-1-sujitka@chromium.org>
Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
files
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 102 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 -------------------
3 files changed, 204 insertions(+), 102 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a7..07133e0af581a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -598,4 +598,106 @@ pinconf-rx {
bias-pull-up;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 609f0ceafd095..d128a0ed6ad3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1540,4 +1540,106 @@ pinconf {
drive-strength = <2>;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1fc328ba0403e..0630a9c410b58 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1872,108 +1872,6 @@ pinmux {
function = "lpass_ext";
};
};
-
- sdc1_on: sdc1-on {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc1_off: sdc1-off {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc2_on: sdc2-on {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- sdc2_off: sdc2-off {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-disable;
- drive-strength = <2>;
- };
- };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.32.0.rc0.204.g9fa02ecfa5-goog
next prev parent reply other threads:[~2021-06-02 19:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-06-02 19:13 ` Sujit Kautkar [this message]
2021-06-03 20:23 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Doug Anderson
2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-06-03 20:33 ` Doug Anderson
2021-06-03 21:16 ` Sujit Kautkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602121313.v3.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid \
--to=sujitka@chromium.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sibis@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).