linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Bernhard Walle <bernhard@bwalle.de>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: ltc3589: Convert to use regulator_set_ramp_delay_regmap
Date: Fri,  4 Jun 2021 19:58:03 +0800	[thread overview]
Message-ID: <20210604115803.1260976-1-axel.lin@ingics.com> (raw)

Use regulator_set_ramp_delay_regmap instead of open-coded

LTC3589_LINEAR_REG() no longer call LTC3589_REG() now.
Only LTC3589_LINEAR_REG() needs to set go_bit, thus remove go_bit
parameter from LTC3589_REG() macro.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/ltc3589.c | 73 +++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 35 deletions(-)

diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
index 38f7ccb63b52..5e0b669c3a01 100644
--- a/drivers/regulator/ltc3589.c
+++ b/drivers/regulator/ltc3589.c
@@ -54,6 +54,11 @@
 #define LTC3589_VCCR_SW3_GO		BIT(4)
 #define LTC3589_VCCR_LDO2_GO		BIT(6)
 
+#define LTC3589_VRRCR_SW1_RAMP_MASK	GENMASK(1, 0)
+#define LTC3589_VRRCR_SW2_RAMP_MASK	GENMASK(3, 2)
+#define LTC3589_VRRCR_SW3_RAMP_MASK	GENMASK(5, 4)
+#define LTC3589_VRRCR_LDO2_RAMP_MASK	GENMASK(7, 6)
+
 enum ltc3589_variant {
 	LTC3589,
 	LTC3589_1,
@@ -88,27 +93,9 @@ static const int ltc3589_12_ldo4[] = {
 	1200000, 1800000, 2500000, 3200000,
 };
 
-static int ltc3589_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
-	struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev);
-	int sel, shift;
-
-	if (unlikely(ramp_delay <= 0))
-		return -EINVAL;
-
-	/* VRRCR slew rate offsets are the same as VCCR go bit offsets */
-	shift = ffs(rdev->desc->apply_bit) - 1;
-
-	/* The slew rate can be set to 0.88, 1.75, 3.5, or 7 mV/uS */
-	for (sel = 0; sel < 4; sel++) {
-		if ((880 << sel) >= ramp_delay) {
-			return regmap_update_bits(ltc3589->regmap,
-						  LTC3589_VRRCR,
-						  0x3 << shift, sel << shift);
-		}
-	}
-	return -EINVAL;
-}
+static const unsigned int ltc3589_ramp_table[] = {
+	880, 1750, 3500, 7000
+};
 
 static int ltc3589_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 {
@@ -149,7 +136,7 @@ static const struct regulator_ops ltc3589_linear_regulator_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_ramp_delay = ltc3589_set_ramp_delay,
+	.set_ramp_delay = regulator_set_ramp_delay_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 	.set_suspend_voltage = ltc3589_set_suspend_voltage,
 	.set_suspend_mode = ltc3589_set_suspend_mode,
@@ -218,16 +205,13 @@ static int ltc3589_of_parse_cb(struct device_node *np,
 	return 0;
 }
 
-#define LTC3589_REG(_name, _of_name, _ops, en_bit, dtv1_reg, dtv_mask, go_bit)\
+#define LTC3589_REG(_name, _of_name, _ops, en_bit, dtv1_reg, dtv_mask)	\
 	[LTC3589_ ## _name] = {						\
 		.name = #_name,						\
 		.of_match = of_match_ptr(#_of_name),			\
 		.regulators_node = of_match_ptr("regulators"),		\
 		.of_parse_cb = ltc3589_of_parse_cb,			\
 		.n_voltages = (dtv_mask) + 1,				\
-		.min_uV = (go_bit) ? 362500 : 0,			\
-		.uV_step = (go_bit) ? 12500 : 0,			\
-		.ramp_delay = (go_bit) ? 1750 : 0,			\
 		.fixed_uV = (dtv_mask) ? 0 : 800000,			\
 		.ops = &ltc3589_ ## _ops ## _regulator_ops,		\
 		.type = REGULATOR_VOLTAGE,				\
@@ -235,30 +219,49 @@ static int ltc3589_of_parse_cb(struct device_node *np,
 		.owner = THIS_MODULE,					\
 		.vsel_reg = (dtv1_reg),					\
 		.vsel_mask = (dtv_mask),				\
-		.apply_reg = (go_bit) ? LTC3589_VCCR : 0,		\
-		.apply_bit = (go_bit),					\
 		.enable_reg = (en_bit) ? LTC3589_OVEN : 0,		\
 		.enable_mask = (en_bit),				\
 	}
 
 #define LTC3589_LINEAR_REG(_name, _of_name, _dtv1)			\
-	LTC3589_REG(_name, _of_name, linear, LTC3589_OVEN_ ## _name,	\
-		    LTC3589_ ## _dtv1, 0x1f,				\
-		    LTC3589_VCCR_ ## _name ## _GO)
+	[LTC3589_ ## _name] = {						\
+		.name = #_name,						\
+		.of_match = of_match_ptr(#_of_name),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.of_parse_cb = ltc3589_of_parse_cb,			\
+		.n_voltages = 32,					\
+		.min_uV = 362500,					\
+		.uV_step = 12500,					\
+		.ramp_delay = 1750,					\
+		.ops = &ltc3589_linear_regulator_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = LTC3589_ ## _name,				\
+		.owner = THIS_MODULE,					\
+		.vsel_reg = LTC3589_ ## _dtv1,				\
+		.vsel_mask = 0x1f,					\
+		.apply_reg = LTC3589_VCCR,				\
+		.apply_bit = LTC3589_VCCR_ ## _name ## _GO,		\
+		.enable_reg = LTC3589_OVEN,				\
+		.enable_mask = (LTC3589_OVEN_ ## _name),		\
+		.ramp_reg = LTC3589_VRRCR,				\
+		.ramp_mask = LTC3589_VRRCR_ ## _name ## _RAMP_MASK,	\
+		.ramp_delay_table = ltc3589_ramp_table,			\
+		.n_ramp_values = ARRAY_SIZE(ltc3589_ramp_table),	\
+	}
+
 
 #define LTC3589_FIXED_REG(_name, _of_name)				\
-	LTC3589_REG(_name, _of_name, fixed, LTC3589_OVEN_ ## _name, 0, 0, 0)
+	LTC3589_REG(_name, _of_name, fixed, LTC3589_OVEN_ ## _name, 0, 0)
 
 static const struct regulator_desc ltc3589_regulators[] = {
 	LTC3589_LINEAR_REG(SW1, sw1, B1DTV1),
 	LTC3589_LINEAR_REG(SW2, sw2, B2DTV1),
 	LTC3589_LINEAR_REG(SW3, sw3, B3DTV1),
 	LTC3589_FIXED_REG(BB_OUT, bb-out),
-	LTC3589_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
+	LTC3589_REG(LDO1, ldo1, fixed_standby, 0, 0, 0),
 	LTC3589_LINEAR_REG(LDO2, ldo2, L2DTV1),
 	LTC3589_FIXED_REG(LDO3, ldo3),
-	LTC3589_REG(LDO4, ldo4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2,
-		    0x60, 0),
+	LTC3589_REG(LDO4, ldo4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2, 0x60),
 };
 
 static bool ltc3589_writeable_reg(struct device *dev, unsigned int reg)
-- 
2.25.1


             reply	other threads:[~2021-06-04 11:58 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 11:58 Axel Lin [this message]
2021-06-08 16:06 ` [PATCH] regulator: ltc3589: Convert to use regulator_set_ramp_delay_regmap Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210604115803.1260976-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=bernhard@bwalle.de \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).