linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
@ 2021-06-04 15:36 Robert Marko
  2021-06-04 15:36 ` [PATCH v3 2/3] dt-bindings: trivial-devices: Add Delta DPS920AB Robert Marko
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Robert Marko @ 2021-06-04 15:36 UTC (permalink / raw)
  To: robh+dt, jdelvare, linux, corbet, trivial, devicetree,
	linux-kernel, linux-hwmon, linux-doc
  Cc: luka.perkov, jmp, pmenzel, buczek, Robert Marko

This adds support for the Delta DPS-920AB PSU.

Only missing feature is fan control which the PSU supports.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v3:
* Use generic pmbus_read/write_word_data()
* Correct word data return code
* Cache PMBUS_MFR_ID and PMBUS_MFR_MODEL instead
of reading them everytime that debugfs is read

Changes in v2:
* Check for Manufacturer and Model
* Restrict word read/write to supported only
* Update documentation to reflect driver changes
* Add basic debugfs entries

 Documentation/hwmon/dps920ab.rst |  73 +++++++++++
 Documentation/hwmon/index.rst    |   1 +
 drivers/hwmon/pmbus/Kconfig      |   9 ++
 drivers/hwmon/pmbus/Makefile     |   1 +
 drivers/hwmon/pmbus/dps920ab.c   | 207 +++++++++++++++++++++++++++++++
 5 files changed, 291 insertions(+)
 create mode 100644 Documentation/hwmon/dps920ab.rst
 create mode 100644 drivers/hwmon/pmbus/dps920ab.c

diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
new file mode 100644
index 000000000000..c33b4cdc0a60
--- /dev/null
+++ b/Documentation/hwmon/dps920ab.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver dps920ab
+========================
+
+Supported chips:
+
+  * Delta DPS920AB
+
+    Prefix: 'dps920ab'
+
+    Addresses scanned: -
+
+Authors:
+    Robert Marko <robert.marko@sartura.hr>
+
+
+Description
+-----------
+
+This driver implements support for Delta DPS920AB 920W 54V DC single output
+power supply with PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+======================= ======================================================
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_alarm		Input current high alarm
+
+curr2_label		"iout1"
+curr2_input		Measured output current
+curr2_max		Maximum output current
+curr2_rated_max		Maximum rated output current
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_alarm		Input voltage alarm
+
+in2_label		"vout1"
+in2_input		Measured output voltage
+in2_rated_min		Minimum rated output voltage
+in2_rated_max		Maximum rated output voltage
+in2_alarm		Output voltage alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+
+power2_label		"pout1"
+power2_input		Measured output power
+power2_rated_max	Maximum rated output power
+
+temp[1-3]_input		Measured temperature
+temp[1-3]_alarm		Temperature alarm
+
+fan1_alarm		Fan 1 warning.
+fan1_fault		Fan 1 fault.
+fan1_input		Fan 1 speed in RPM.
+======================= ======================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 8d5a2df1ecb6..b24436f22052 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -54,6 +54,7 @@ Hardware Monitoring Kernel Drivers
    dell-smm-hwmon
    dme1737
    drivetemp
+   dps920ab
    ds1621
    ds620
    emc1403
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 32d2fc850621..865ade0aa205 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -66,6 +66,15 @@ config SENSORS_IBM_CFFPS
 	  This driver can also be built as a module. If so, the module will
 	  be called ibm-cffps.
 
+config SENSORS_DPS920AB
+	tristate "Delta DPS920AB Power Supply"
+	help
+	  If you say yes here you get hardware monitoring support for Delta
+	  DPS920AB Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called dps920ab.
+
 config SENSORS_INSPUR_IPSPS
 	tristate "INSPUR Power System Power Supply"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 6a4ba0fdc1db..f59ba0123d68 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
+obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
 obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
 obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
 obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c
new file mode 100644
index 000000000000..5ae536cba302
--- /dev/null
+++ b/drivers/hwmon/pmbus/dps920ab.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Delta DPS920AB PSU
+ *
+ * Copyright (C) 2021 Delta Networks, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+struct dps920ab_data {
+	struct i2c_client *client;
+	struct dentry *debugfs_dir;
+	char *mfr_model;
+	char *mfr_id;
+};
+
+static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	/*
+	 * This masks commands which are not supported.
+	 * PSU advertises that all features are supported,
+	 * in reality that unfortunately is not true.
+	 * So enable only those that the datasheet confirms.
+	 */
+	switch (reg) {
+	case PMBUS_FAN_COMMAND_1:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_STATUS_WORD:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_IIN:
+	case PMBUS_READ_VOUT:
+	case PMBUS_READ_IOUT:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_POUT:
+	case PMBUS_READ_PIN:
+	case PMBUS_MFR_VOUT_MIN:
+	case PMBUS_MFR_VOUT_MAX:
+	case PMBUS_MFR_IOUT_MAX:
+	case PMBUS_MFR_POUT_MAX:
+		return pmbus_read_word_data(client, page, phase, reg);
+	default:
+		return -ENXIO;
+	}
+}
+
+static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg,
+				    u16 word)
+{
+	/*
+	 * This masks commands which are not supported.
+	 * PSU only has one R/W register and that is
+	 * for the fan.
+	 */
+	switch (reg) {
+	case PMBUS_FAN_COMMAND_1:
+		return pmbus_write_word_data(client, page, reg, word);
+	default:
+		return -EACCES;
+	}
+}
+
+static struct pmbus_driver_info dps920ab_info = {
+	.pages = 1,
+
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_FAN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+
+	.func[0] =
+		PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_TEMP  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+		PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 |
+		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.read_word_data = dps920ab_read_word_data,
+	.write_word_data = dps920ab_write_word_data,
+};
+
+static int dps920ab_mfr_id_show(struct seq_file *s, void *data)
+{
+	struct dps920ab_data *priv = s->private;
+
+	seq_printf(s, "%s\n", priv->mfr_id);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id);
+
+static int dps920ab_mfr_model_show(struct seq_file *s, void *data)
+{
+	struct dps920ab_data *priv = s->private;
+
+	seq_printf(s, "%s\n", priv->mfr_model);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model);
+
+static void dps920ab_init_debugfs(struct dps920ab_data *data)
+{
+	struct dentry *root;
+
+	root = pmbus_get_debugfs_dir(data->client);
+	if (!root)
+		return;
+
+	data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+	if (!data->debugfs_dir)
+		return;
+
+	debugfs_create_file("mfr_id",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &dps920ab_mfr_id_fops);
+
+	debugfs_create_file("mfr_model",
+			    0400,
+			    data->debugfs_dir,
+			    data,
+			    &dps920ab_mfr_model_fops);
+}
+
+static int dps920ab_probe(struct i2c_client *client)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	struct dps920ab_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+		return ret;
+	}
+	if (ret != 5 || strncmp(buf, "DELTA", 5)) {
+		buf[ret] = '\0';
+		dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf);
+		return -ENODEV;
+	}
+	data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
+	if (!data->mfr_id)
+		return -ENOMEM;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+	if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) {
+		buf[ret] = '\0';
+		dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+	data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
+	if (!data->mfr_model)
+		return -ENOMEM;
+
+	ret = pmbus_do_probe(client, &dps920ab_info);
+	if (ret)
+		return ret;
+
+	data->client = client;
+
+	dps920ab_init_debugfs(data);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused dps920ab_of_match[] = {
+	{ .compatible = "delta,dps920ab", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, dps920ab_of_match);
+
+static struct i2c_driver dps920ab_driver = {
+	.driver = {
+		   .name = "dps920ab",
+		   .of_match_table = of_match_ptr(dps920ab_of_match),
+	},
+	.probe_new = dps920ab_probe,
+};
+
+module_i2c_driver(dps920ab_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU");
+MODULE_LICENSE("GPL");
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v3 2/3] dt-bindings: trivial-devices: Add Delta DPS920AB
  2021-06-04 15:36 [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Robert Marko
@ 2021-06-04 15:36 ` Robert Marko
  2021-06-04 15:36 ` [PATCH v3 3/3] MAINTAINERS: Add Delta DPS920AB PSU driver Robert Marko
  2021-06-06 12:59 ` [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Guenter Roeck
  2 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2021-06-04 15:36 UTC (permalink / raw)
  To: robh+dt, jdelvare, linux, corbet, trivial, devicetree,
	linux-kernel, linux-hwmon, linux-doc
  Cc: luka.perkov, jmp, pmenzel, buczek, Robert Marko

Add trivial device entry for Delta DPS920AB PSU.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v2:
* Drop custom bindings file and use trivial-devices

 Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index a327130d1faa..1cb6c1fc0903 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -68,6 +68,8 @@ properties:
           - dallas,ds4510
             # Digital Thermometer and Thermostat
           - dallas,ds75
+          # Delta Electronics DPS920AB 920W 54V Power Supply
+          - delta,dps920ab
             # 1/4 Brick DC/DC Regulated Power Module
           - delta,q54sj108a2
             # Devantech SRF02 ultrasonic ranger in I2C mode
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v3 3/3] MAINTAINERS: Add Delta DPS920AB PSU driver
  2021-06-04 15:36 [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Robert Marko
  2021-06-04 15:36 ` [PATCH v3 2/3] dt-bindings: trivial-devices: Add Delta DPS920AB Robert Marko
@ 2021-06-04 15:36 ` Robert Marko
  2021-06-06 12:59 ` [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Guenter Roeck
  2 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2021-06-04 15:36 UTC (permalink / raw)
  To: robh+dt, jdelvare, linux, corbet, trivial, devicetree,
	linux-kernel, linux-hwmon, linux-doc
  Cc: luka.perkov, jmp, pmenzel, buczek, Robert Marko

Add maintainers entry for the Delta DPS920AB PSU driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
Changes in v2:
* Drop YAML bindings

 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 82d9c2943c34..0707986e9bb1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5105,6 +5105,13 @@ F:	Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
 F:	drivers/gpio/gpio-tn48m.c
 F:	include/dt-bindings/reset/delta,tn48m-reset.h
 
+DELTA DPS920AB PSU DRIVER
+M:	Robert Marko <robert.marko@sartura.hr>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/dps920ab.rst
+F:	drivers/hwmon/pmbus/dps920ab.c
+
 DENALI NAND DRIVER
 L:	linux-mtd@lists.infradead.org
 S:	Orphan
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
  2021-06-04 15:36 [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Robert Marko
  2021-06-04 15:36 ` [PATCH v3 2/3] dt-bindings: trivial-devices: Add Delta DPS920AB Robert Marko
  2021-06-04 15:36 ` [PATCH v3 3/3] MAINTAINERS: Add Delta DPS920AB PSU driver Robert Marko
@ 2021-06-06 12:59 ` Guenter Roeck
  2021-06-07 10:35   ` Robert Marko
  2 siblings, 1 reply; 5+ messages in thread
From: Guenter Roeck @ 2021-06-06 12:59 UTC (permalink / raw)
  To: Robert Marko
  Cc: robh+dt, jdelvare, corbet, trivial, devicetree, linux-kernel,
	linux-hwmon, linux-doc, luka.perkov, jmp, pmenzel, buczek

On Fri, Jun 04, 2021 at 05:36:10PM +0200, Robert Marko wrote:
> This adds support for the Delta DPS-920AB PSU.
> 
> Only missing feature is fan control which the PSU supports.
> 
> Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> ---
> Changes in v3:
> * Use generic pmbus_read/write_word_data()
> * Correct word data return code
> * Cache PMBUS_MFR_ID and PMBUS_MFR_MODEL instead
> of reading them everytime that debugfs is read
> 
> Changes in v2:
> * Check for Manufacturer and Model
> * Restrict word read/write to supported only
> * Update documentation to reflect driver changes
> * Add basic debugfs entries
> 
>  Documentation/hwmon/dps920ab.rst |  73 +++++++++++
>  Documentation/hwmon/index.rst    |   1 +
>  drivers/hwmon/pmbus/Kconfig      |   9 ++
>  drivers/hwmon/pmbus/Makefile     |   1 +
>  drivers/hwmon/pmbus/dps920ab.c   | 207 +++++++++++++++++++++++++++++++
>  5 files changed, 291 insertions(+)
>  create mode 100644 Documentation/hwmon/dps920ab.rst
>  create mode 100644 drivers/hwmon/pmbus/dps920ab.c
> 
> diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
> new file mode 100644
> index 000000000000..c33b4cdc0a60
> --- /dev/null
> +++ b/Documentation/hwmon/dps920ab.rst
> @@ -0,0 +1,73 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +Kernel driver dps920ab
> +========================
> +
> +Supported chips:
> +
> +  * Delta DPS920AB
> +
> +    Prefix: 'dps920ab'
> +
> +    Addresses scanned: -
> +
> +Authors:
> +    Robert Marko <robert.marko@sartura.hr>
> +
> +
> +Description
> +-----------
> +
> +This driver implements support for Delta DPS920AB 920W 54V DC single output
> +power supply with PMBus support.
> +
> +The driver is a client driver to the core PMBus driver.
> +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> +
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
> +details.
> +
> +
> +Sysfs entries
> +-------------
> +
> +======================= ======================================================
> +curr1_label		"iin"
> +curr1_input		Measured input current
> +curr1_alarm		Input current high alarm
> +
> +curr2_label		"iout1"
> +curr2_input		Measured output current
> +curr2_max		Maximum output current
> +curr2_rated_max		Maximum rated output current
> +
> +in1_label		"vin"
> +in1_input		Measured input voltage
> +in1_alarm		Input voltage alarm
> +
> +in2_label		"vout1"
> +in2_input		Measured output voltage
> +in2_rated_min		Minimum rated output voltage
> +in2_rated_max		Maximum rated output voltage
> +in2_alarm		Output voltage alarm
> +
> +power1_label		"pin"
> +power1_input		Measured input power
> +power1_alarm		Input power high alarm
> +
> +power2_label		"pout1"
> +power2_input		Measured output power
> +power2_rated_max	Maximum rated output power
> +
> +temp[1-3]_input		Measured temperature
> +temp[1-3]_alarm		Temperature alarm
> +
> +fan1_alarm		Fan 1 warning.
> +fan1_fault		Fan 1 fault.
> +fan1_input		Fan 1 speed in RPM.
> +======================= ======================================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 8d5a2df1ecb6..b24436f22052 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -54,6 +54,7 @@ Hardware Monitoring Kernel Drivers
>     dell-smm-hwmon
>     dme1737
>     drivetemp
> +   dps920ab

Alphabetic order please.

>     ds1621
>     ds620
>     emc1403
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 32d2fc850621..865ade0aa205 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -66,6 +66,15 @@ config SENSORS_IBM_CFFPS
>  	  This driver can also be built as a module. If so, the module will
>  	  be called ibm-cffps.
>  
> +config SENSORS_DPS920AB
> +	tristate "Delta DPS920AB Power Supply"
> +	help
> +	  If you say yes here you get hardware monitoring support for Delta
> +	  DPS920AB Power Supplies.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called dps920ab.
> +
>  config SENSORS_INSPUR_IPSPS
>  	tristate "INSPUR Power System Power Supply"
>  	help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 6a4ba0fdc1db..f59ba0123d68 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
>  obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
>  obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
>  obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
> +obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
>  obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
>  obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
>  obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
> diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c
> new file mode 100644
> index 000000000000..5ae536cba302
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/dps920ab.c
> @@ -0,0 +1,207 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Driver for Delta DPS920AB PSU
> + *
> + * Copyright (C) 2021 Delta Networks, Inc.
> + * Copyright (C) 2021 Sartura Ltd.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include "pmbus.h"
> +
> +struct dps920ab_data {
> +	struct i2c_client *client;
> +	struct dentry *debugfs_dir;
> +	char *mfr_model;
> +	char *mfr_id;
> +};
> +
> +static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg)
> +{
> +	/*
> +	 * This masks commands which are not supported.
> +	 * PSU advertises that all features are supported,
> +	 * in reality that unfortunately is not true.
> +	 * So enable only those that the datasheet confirms.
> +	 */
> +	switch (reg) {
> +	case PMBUS_FAN_COMMAND_1:
> +	case PMBUS_IOUT_OC_WARN_LIMIT:
> +	case PMBUS_STATUS_WORD:
> +	case PMBUS_READ_VIN:
> +	case PMBUS_READ_IIN:
> +	case PMBUS_READ_VOUT:
> +	case PMBUS_READ_IOUT:
> +	case PMBUS_READ_TEMPERATURE_1:
> +	case PMBUS_READ_TEMPERATURE_2:
> +	case PMBUS_READ_TEMPERATURE_3:
> +	case PMBUS_READ_FAN_SPEED_1:
> +	case PMBUS_READ_POUT:
> +	case PMBUS_READ_PIN:
> +	case PMBUS_MFR_VOUT_MIN:
> +	case PMBUS_MFR_VOUT_MAX:
> +	case PMBUS_MFR_IOUT_MAX:
> +	case PMBUS_MFR_POUT_MAX:
> +		return pmbus_read_word_data(client, page, phase, reg);
> +	default:
> +		return -ENXIO;
> +	}
> +}
> +
> +static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg,
> +				    u16 word)
> +{
> +	/*
> +	 * This masks commands which are not supported.
> +	 * PSU only has one R/W register and that is
> +	 * for the fan.
> +	 */
> +	switch (reg) {
> +	case PMBUS_FAN_COMMAND_1:
> +		return pmbus_write_word_data(client, page, reg, word);
> +	default:
> +		return -EACCES;
> +	}
> +}
> +
> +static struct pmbus_driver_info dps920ab_info = {
> +	.pages = 1,
> +
> +	.format[PSC_VOLTAGE_IN] = linear,
> +	.format[PSC_VOLTAGE_OUT] = linear,
> +	.format[PSC_CURRENT_IN] = linear,
> +	.format[PSC_CURRENT_OUT] = linear,
> +	.format[PSC_POWER] = linear,
> +	.format[PSC_FAN] = linear,
> +	.format[PSC_TEMPERATURE] = linear,
> +
> +	.func[0] =
> +		PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
> +		PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
> +		PMBUS_HAVE_TEMP  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
> +		PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 |
> +		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
> +		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
> +	.read_word_data = dps920ab_read_word_data,
> +	.write_word_data = dps920ab_write_word_data,
> +};
> +
> +static int dps920ab_mfr_id_show(struct seq_file *s, void *data)
> +{
> +	struct dps920ab_data *priv = s->private;
> +
> +	seq_printf(s, "%s\n", priv->mfr_id);
> +
> +	return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id);
> +
> +static int dps920ab_mfr_model_show(struct seq_file *s, void *data)
> +{
> +	struct dps920ab_data *priv = s->private;
> +
> +	seq_printf(s, "%s\n", priv->mfr_model);
> +
> +	return 0;
> +}
> +
> +DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model);
> +
> +static void dps920ab_init_debugfs(struct dps920ab_data *data)
> +{
> +	struct dentry *root;
> +
> +	root = pmbus_get_debugfs_dir(data->client);
> +	if (!root)
> +		return;
> +
> +	data->debugfs_dir = debugfs_create_dir(data->client->name, root);

debugfs_dir is only used here. Please just use a local variable.

> +	if (!data->debugfs_dir)
> +		return;
> +
> +	debugfs_create_file("mfr_id",
> +			    0400,
> +			    data->debugfs_dir,
> +			    data,
> +			    &dps920ab_mfr_id_fops);
> +
> +	debugfs_create_file("mfr_model",
> +			    0400,
> +			    data->debugfs_dir,
> +			    data,
> +			    &dps920ab_mfr_model_fops);
> +}
> +
> +static int dps920ab_probe(struct i2c_client *client)
> +{
> +	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
> +	struct dps920ab_data *data;
> +	int ret;
> +
> +	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
> +		return ret;
> +	}
> +	if (ret != 5 || strncmp(buf, "DELTA", 5)) {
> +		buf[ret] = '\0';
> +		dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf);
> +		return -ENODEV;
> +	}
> +	data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL);

There is no guarantee that the returned string is terminated.
For this to work, "buf[ret] = '\0';" needs to be ahead of the if
statement above.

> +	if (!data->mfr_id)
> +		return -ENOMEM;
> +
> +	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
> +		return ret;
> +	}
> +	if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) {
> +		buf[ret] = '\0';
> +		dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf);
> +		return -ENODEV;
> +	}
> +	data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL);

Same as above.

> +	if (!data->mfr_model)
> +		return -ENOMEM;
> +
> +	ret = pmbus_do_probe(client, &dps920ab_info);
> +	if (ret)
> +		return ret;
> +
> +	data->client = client;

data->client is only used in dps920ab_init_debugfs(). Just pass 'client'
as additional argument to that function.

> +
> +	dps920ab_init_debugfs(data);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id __maybe_unused dps920ab_of_match[] = {
> +	{ .compatible = "delta,dps920ab", },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, dps920ab_of_match);
> +
> +static struct i2c_driver dps920ab_driver = {
> +	.driver = {
> +		   .name = "dps920ab",
> +		   .of_match_table = of_match_ptr(dps920ab_of_match),
> +	},
> +	.probe_new = dps920ab_probe,
> +};
> +
> +module_i2c_driver(dps920ab_driver);
> +
> +MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
> +MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU");
> +MODULE_LICENSE("GPL");
> -- 
> 2.31.1
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
  2021-06-06 12:59 ` [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Guenter Roeck
@ 2021-06-07 10:35   ` Robert Marko
  0 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2021-06-07 10:35 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: robh+dt, jdelvare, corbet, trivial, devicetree, linux-kernel,
	linux-hwmon, linux-doc, Luka Perkov, jmp, Paul Menzel,
	Donald Buczek

On Sun, Jun 6, 2021 at 2:59 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Fri, Jun 04, 2021 at 05:36:10PM +0200, Robert Marko wrote:
> > This adds support for the Delta DPS-920AB PSU.
> >
> > Only missing feature is fan control which the PSU supports.
> >
> > Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> > ---
> > Changes in v3:
> > * Use generic pmbus_read/write_word_data()
> > * Correct word data return code
> > * Cache PMBUS_MFR_ID and PMBUS_MFR_MODEL instead
> > of reading them everytime that debugfs is read
> >
> > Changes in v2:
> > * Check for Manufacturer and Model
> > * Restrict word read/write to supported only
> > * Update documentation to reflect driver changes
> > * Add basic debugfs entries
> >
> >  Documentation/hwmon/dps920ab.rst |  73 +++++++++++
> >  Documentation/hwmon/index.rst    |   1 +
> >  drivers/hwmon/pmbus/Kconfig      |   9 ++
> >  drivers/hwmon/pmbus/Makefile     |   1 +
> >  drivers/hwmon/pmbus/dps920ab.c   | 207 +++++++++++++++++++++++++++++++
> >  5 files changed, 291 insertions(+)
> >  create mode 100644 Documentation/hwmon/dps920ab.rst
> >  create mode 100644 drivers/hwmon/pmbus/dps920ab.c
> >
> > diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
> > new file mode 100644
> > index 000000000000..c33b4cdc0a60
> > --- /dev/null
> > +++ b/Documentation/hwmon/dps920ab.rst
> > @@ -0,0 +1,73 @@
> > +.. SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +Kernel driver dps920ab
> > +========================
> > +
> > +Supported chips:
> > +
> > +  * Delta DPS920AB
> > +
> > +    Prefix: 'dps920ab'
> > +
> > +    Addresses scanned: -
> > +
> > +Authors:
> > +    Robert Marko <robert.marko@sartura.hr>
> > +
> > +
> > +Description
> > +-----------
> > +
> > +This driver implements support for Delta DPS920AB 920W 54V DC single output
> > +power supply with PMBus support.
> > +
> > +The driver is a client driver to the core PMBus driver.
> > +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> > +
> > +
> > +Usage Notes
> > +-----------
> > +
> > +This driver does not auto-detect devices. You will have to instantiate the
> > +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
> > +details.
> > +
> > +
> > +Sysfs entries
> > +-------------
> > +
> > +======================= ======================================================
> > +curr1_label          "iin"
> > +curr1_input          Measured input current
> > +curr1_alarm          Input current high alarm
> > +
> > +curr2_label          "iout1"
> > +curr2_input          Measured output current
> > +curr2_max            Maximum output current
> > +curr2_rated_max              Maximum rated output current
> > +
> > +in1_label            "vin"
> > +in1_input            Measured input voltage
> > +in1_alarm            Input voltage alarm
> > +
> > +in2_label            "vout1"
> > +in2_input            Measured output voltage
> > +in2_rated_min                Minimum rated output voltage
> > +in2_rated_max                Maximum rated output voltage
> > +in2_alarm            Output voltage alarm
> > +
> > +power1_label         "pin"
> > +power1_input         Measured input power
> > +power1_alarm         Input power high alarm
> > +
> > +power2_label         "pout1"
> > +power2_input         Measured output power
> > +power2_rated_max     Maximum rated output power
> > +
> > +temp[1-3]_input              Measured temperature
> > +temp[1-3]_alarm              Temperature alarm
> > +
> > +fan1_alarm           Fan 1 warning.
> > +fan1_fault           Fan 1 fault.
> > +fan1_input           Fan 1 speed in RPM.
> > +======================= ======================================================
> > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> > index 8d5a2df1ecb6..b24436f22052 100644
> > --- a/Documentation/hwmon/index.rst
> > +++ b/Documentation/hwmon/index.rst
> > @@ -54,6 +54,7 @@ Hardware Monitoring Kernel Drivers
> >     dell-smm-hwmon
> >     dme1737
> >     drivetemp
> > +   dps920ab
>
> Alphabetic order please.
>
> >     ds1621
> >     ds620
> >     emc1403
> > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> > index 32d2fc850621..865ade0aa205 100644
> > --- a/drivers/hwmon/pmbus/Kconfig
> > +++ b/drivers/hwmon/pmbus/Kconfig
> > @@ -66,6 +66,15 @@ config SENSORS_IBM_CFFPS
> >         This driver can also be built as a module. If so, the module will
> >         be called ibm-cffps.
> >
> > +config SENSORS_DPS920AB
> > +     tristate "Delta DPS920AB Power Supply"
> > +     help
> > +       If you say yes here you get hardware monitoring support for Delta
> > +       DPS920AB Power Supplies.
> > +
> > +       This driver can also be built as a module. If so, the module will
> > +       be called dps920ab.
> > +
> >  config SENSORS_INSPUR_IPSPS
> >       tristate "INSPUR Power System Power Supply"
> >       help
> > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> > index 6a4ba0fdc1db..f59ba0123d68 100644
> > --- a/drivers/hwmon/pmbus/Makefile
> > +++ b/drivers/hwmon/pmbus/Makefile
> > @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> >  obj-$(CONFIG_SENSORS_ADM1275)        += adm1275.o
> >  obj-$(CONFIG_SENSORS_BEL_PFE)        += bel-pfe.o
> >  obj-$(CONFIG_SENSORS_IBM_CFFPS)      += ibm-cffps.o
> > +obj-$(CONFIG_SENSORS_DPS920AB)       += dps920ab.o
> >  obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
> >  obj-$(CONFIG_SENSORS_IR35221)        += ir35221.o
> >  obj-$(CONFIG_SENSORS_IR38064)        += ir38064.o
> > diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c
> > new file mode 100644
> > index 000000000000..5ae536cba302
> > --- /dev/null
> > +++ b/drivers/hwmon/pmbus/dps920ab.c
> > @@ -0,0 +1,207 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Driver for Delta DPS920AB PSU
> > + *
> > + * Copyright (C) 2021 Delta Networks, Inc.
> > + * Copyright (C) 2021 Sartura Ltd.
> > + */
> > +
> > +#include <linux/debugfs.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include "pmbus.h"
> > +
> > +struct dps920ab_data {
> > +     struct i2c_client *client;
> > +     struct dentry *debugfs_dir;
> > +     char *mfr_model;
> > +     char *mfr_id;
> > +};
> > +
> > +static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg)
> > +{
> > +     /*
> > +      * This masks commands which are not supported.
> > +      * PSU advertises that all features are supported,
> > +      * in reality that unfortunately is not true.
> > +      * So enable only those that the datasheet confirms.
> > +      */
> > +     switch (reg) {
> > +     case PMBUS_FAN_COMMAND_1:
> > +     case PMBUS_IOUT_OC_WARN_LIMIT:
> > +     case PMBUS_STATUS_WORD:
> > +     case PMBUS_READ_VIN:
> > +     case PMBUS_READ_IIN:
> > +     case PMBUS_READ_VOUT:
> > +     case PMBUS_READ_IOUT:
> > +     case PMBUS_READ_TEMPERATURE_1:
> > +     case PMBUS_READ_TEMPERATURE_2:
> > +     case PMBUS_READ_TEMPERATURE_3:
> > +     case PMBUS_READ_FAN_SPEED_1:
> > +     case PMBUS_READ_POUT:
> > +     case PMBUS_READ_PIN:
> > +     case PMBUS_MFR_VOUT_MIN:
> > +     case PMBUS_MFR_VOUT_MAX:
> > +     case PMBUS_MFR_IOUT_MAX:
> > +     case PMBUS_MFR_POUT_MAX:
> > +             return pmbus_read_word_data(client, page, phase, reg);
> > +     default:
> > +             return -ENXIO;
> > +     }
> > +}
> > +
> > +static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg,
> > +                                 u16 word)
> > +{
> > +     /*
> > +      * This masks commands which are not supported.
> > +      * PSU only has one R/W register and that is
> > +      * for the fan.
> > +      */
> > +     switch (reg) {
> > +     case PMBUS_FAN_COMMAND_1:
> > +             return pmbus_write_word_data(client, page, reg, word);
> > +     default:
> > +             return -EACCES;
> > +     }
> > +}
> > +
> > +static struct pmbus_driver_info dps920ab_info = {
> > +     .pages = 1,
> > +
> > +     .format[PSC_VOLTAGE_IN] = linear,
> > +     .format[PSC_VOLTAGE_OUT] = linear,
> > +     .format[PSC_CURRENT_IN] = linear,
> > +     .format[PSC_CURRENT_OUT] = linear,
> > +     .format[PSC_POWER] = linear,
> > +     .format[PSC_FAN] = linear,
> > +     .format[PSC_TEMPERATURE] = linear,
> > +
> > +     .func[0] =
> > +             PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
> > +             PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
> > +             PMBUS_HAVE_TEMP  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
> > +             PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 |
> > +             PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
> > +             PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
> > +     .read_word_data = dps920ab_read_word_data,
> > +     .write_word_data = dps920ab_write_word_data,
> > +};
> > +
> > +static int dps920ab_mfr_id_show(struct seq_file *s, void *data)
> > +{
> > +     struct dps920ab_data *priv = s->private;
> > +
> > +     seq_printf(s, "%s\n", priv->mfr_id);
> > +
> > +     return 0;
> > +}
> > +
> > +DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id);
> > +
> > +static int dps920ab_mfr_model_show(struct seq_file *s, void *data)
> > +{
> > +     struct dps920ab_data *priv = s->private;
> > +
> > +     seq_printf(s, "%s\n", priv->mfr_model);
> > +
> > +     return 0;
> > +}
> > +
> > +DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model);
> > +
> > +static void dps920ab_init_debugfs(struct dps920ab_data *data)
> > +{
> > +     struct dentry *root;
> > +
> > +     root = pmbus_get_debugfs_dir(data->client);
> > +     if (!root)
> > +             return;
> > +
> > +     data->debugfs_dir = debugfs_create_dir(data->client->name, root);
>
> debugfs_dir is only used here. Please just use a local variable.
>
> > +     if (!data->debugfs_dir)
> > +             return;
> > +
> > +     debugfs_create_file("mfr_id",
> > +                         0400,
> > +                         data->debugfs_dir,
> > +                         data,
> > +                         &dps920ab_mfr_id_fops);
> > +
> > +     debugfs_create_file("mfr_model",
> > +                         0400,
> > +                         data->debugfs_dir,
> > +                         data,
> > +                         &dps920ab_mfr_model_fops);
> > +}
> > +
> > +static int dps920ab_probe(struct i2c_client *client)
> > +{
> > +     u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
> > +     struct dps920ab_data *data;
> > +     int ret;
> > +
> > +     data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> > +     if (!data)
> > +             return -ENOMEM;
> > +
> > +     ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> > +     if (ret < 0) {
> > +             dev_err(&client->dev, "Failed to read Manufacturer ID\n");
> > +             return ret;
> > +     }
> > +     if (ret != 5 || strncmp(buf, "DELTA", 5)) {
> > +             buf[ret] = '\0';
> > +             dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf);
> > +             return -ENODEV;
> > +     }
> > +     data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
>
> There is no guarantee that the returned string is terminated.
> For this to work, "buf[ret] = '\0';" needs to be ahead of the if
> statement above.
>
> > +     if (!data->mfr_id)
> > +             return -ENOMEM;
> > +
> > +     ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> > +     if (ret < 0) {
> > +             dev_err(&client->dev, "Failed to read Manufacturer Model\n");
> > +             return ret;
> > +     }
> > +     if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) {
> > +             buf[ret] = '\0';
> > +             dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf);
> > +             return -ENODEV;
> > +     }
> > +     data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
>
> Same as above.
>
> > +     if (!data->mfr_model)
> > +             return -ENOMEM;
> > +
> > +     ret = pmbus_do_probe(client, &dps920ab_info);
> > +     if (ret)
> > +             return ret;
> > +
> > +     data->client = client;
>
> data->client is only used in dps920ab_init_debugfs(). Just pass 'client'
> as additional argument to that function.

Thanks for the comments,
I have sent v4 resolving these.

Regards,
Robert
>
> > +
> > +     dps920ab_init_debugfs(data);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id __maybe_unused dps920ab_of_match[] = {
> > +     { .compatible = "delta,dps920ab", },
> > +     {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, dps920ab_of_match);
> > +
> > +static struct i2c_driver dps920ab_driver = {
> > +     .driver = {
> > +                .name = "dps920ab",
> > +                .of_match_table = of_match_ptr(dps920ab_of_match),
> > +     },
> > +     .probe_new = dps920ab_probe,
> > +};
> > +
> > +module_i2c_driver(dps920ab_driver);
> > +
> > +MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
> > +MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.31.1
> >



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-06-07 10:36 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-04 15:36 [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Robert Marko
2021-06-04 15:36 ` [PATCH v3 2/3] dt-bindings: trivial-devices: Add Delta DPS920AB Robert Marko
2021-06-04 15:36 ` [PATCH v3 3/3] MAINTAINERS: Add Delta DPS920AB PSU driver Robert Marko
2021-06-06 12:59 ` [PATCH v3 1/3] hwmon: (pmbus) Add driver for Delta DPS-920AB PSU Guenter Roeck
2021-06-07 10:35   ` Robert Marko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).