From: Dario Binacchi <dariobin@libero.it>
To: linux-clk@vger.kernel.org
Cc: "Rob Herring" <robh@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Michael Turquette" <mturquette@baylibre.com>,
"Dario Binacchi" <dariobin@libero.it>,
linux-omap@vger.kernel.org, "Lee Jones" <lee.jones@linaro.org>,
"Stephen Boyd" <sboyd@kernel.org>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tero Kristo" <kristo@kernel.org>,
linux-kernel@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Subject: [RESEND PATCH v7 4/5] ARM: dts: am43xx-clocks: add spread spectrum support
Date: Sun, 6 Jun 2021 22:22:52 +0200 [thread overview]
Message-ID: <20210606202253.31649-5-dariobin@libero.it> (raw)
In-Reply-To: <20210606202253.31649-1-dariobin@libero.it>
Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruhl7x RM, SSC is supported only for LCD
and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and
PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field
in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE,
MPU, DDR, PER, DISP, EXTDEV).
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Tony Lindgren <tony@atomide.com>
---
Changes in v7:
- Add Tony Lindgren acked tag.
arch/arm/boot/dts/am43xx-clocks.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c726cd8dbdf1..314fc5975acb 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -204,7 +204,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+ reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
};
dpll_core_x2_ck: dpll_core_x2_ck {
@@ -250,7 +250,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+ reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
@@ -276,7 +276,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2da0>, <0x2da4>, <0x2dac>;
+ reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
@@ -294,7 +294,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+ reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
@@ -313,7 +313,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2de0>, <0x2de4>, <0x2dec>;
+ reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
};
dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
@@ -557,7 +557,7 @@
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
- reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+ reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
};
dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
--
2.17.1
next prev parent reply other threads:[~2021-06-06 20:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-06 20:22 [RESEND PATCH v7 0/5] clk: ti: add am33xx spread spectrum clock support Dario Binacchi
2021-06-06 20:22 ` [RESEND PATCH v7 1/5] clk: ti: fix typo in routine description Dario Binacchi
2021-06-09 0:52 ` Stephen Boyd
2021-06-06 20:22 ` [RESEND PATCH v7 2/5] dt-bindings: ti: dpll: add spread spectrum support Dario Binacchi
2021-06-09 0:52 ` Stephen Boyd
2021-06-06 20:22 ` [RESEND PATCH v7 3/5] ARM: dts: am33xx-clocks: " Dario Binacchi
2021-06-09 0:52 ` Stephen Boyd
2021-06-06 20:22 ` Dario Binacchi [this message]
2021-06-09 0:52 ` [RESEND PATCH v7 4/5] ARM: dts: am43xx-clocks: " Stephen Boyd
2021-06-06 20:22 ` [RESEND PATCH v7 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support Dario Binacchi
2021-06-09 0:52 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210606202253.31649-5-dariobin@libero.it \
--to=dariobin@libero.it \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).