linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vlastimil Babka <vbabka@suse.cz>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Christoph Lameter <cl@linux.com>,
	David Rientjes <rientjes@google.com>,
	Pekka Enberg <penberg@kernel.org>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Thomas Gleixner <tglx@linutronix.de>,
	Mel Gorman <mgorman@techsingularity.net>,
	Jesper Dangaard Brouer <brouer@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Jann Horn <jannh@google.com>, Vlastimil Babka <vbabka@suse.cz>
Subject: [RFC v2 12/34] mm, slub: move disabling/enabling irqs to ___slab_alloc()
Date: Wed,  9 Jun 2021 13:38:41 +0200	[thread overview]
Message-ID: <20210609113903.1421-13-vbabka@suse.cz> (raw)
In-Reply-To: <20210609113903.1421-1-vbabka@suse.cz>

Currently __slab_alloc() disables irqs around the whole ___slab_alloc().  This
includes cases where this is not needed, such as when the allocation ends up in
the page allocator and has to awkwardly enable irqs back based on gfp flags.
Also the whole kmem_cache_alloc_bulk() is executed with irqs disabled even when
it hits the __slab_alloc() slow path, and long periods with disabled interrupts
are undesirable.

As a first step towards reducing irq disabled periods, move irq handling into
___slab_alloc(). Callers will instead prevent the s->cpu_slab percpu pointer
from becoming invalid via get_cpu_ptr(), thus preempt_disable(). This does not
protect against modification by an irq handler, which is still done by disabled
irq for most of ___slab_alloc(). As a small immediate benefit,
slab_out_of_memory() from ___slab_alloc() is now called with irqs enabled.

kmem_cache_alloc_bulk() disables irqs for its fastpath and then re-enables them
before calling ___slab_alloc(), which then disables them at its discretion. The
whole kmem_cache_alloc_bulk() operation also disables preemption.

When  ___slab_alloc() calls new_slab() to allocate a new page, re-enable
preemption, because new_slab() will re-enable interrupts in contexts that allow
blocking (this will be improved by later patches).

The patch itself will thus increase overhead a bit due to disabled preemption
and increased disabling/enabling irqs in kmem_cache_alloc_bulk(), but that will
be gradually improved in the following patches.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/slub.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 6d6a9a69db8a..4800d768d0d3 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2610,7 +2610,7 @@ static inline void *get_freelist(struct kmem_cache *s, struct page *page)
  * we need to allocate a new slab. This is the slowest path since it involves
  * a call to the page allocator and the setup of a new slab.
  *
- * Version of __slab_alloc to use when we know that interrupts are
+ * Version of __slab_alloc to use when we know that preemption is
  * already disabled (which is the case for bulk allocation).
  */
 static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
@@ -2618,9 +2618,11 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 {
 	void *freelist;
 	struct page *page;
+	unsigned long flags;
 
 	stat(s, ALLOC_SLOWPATH);
 
+	local_irq_save(flags);
 	page = c->page;
 	if (!page) {
 		/*
@@ -2683,6 +2685,7 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 	VM_BUG_ON(!c->page->frozen);
 	c->freelist = get_freepointer(s, freelist);
 	c->tid = next_tid(c->tid);
+	local_irq_restore(flags);
 	return freelist;
 
 new_slab:
@@ -2700,14 +2703,16 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 		goto check_new_page;
 	}
 
+	put_cpu_ptr(s->cpu_slab);
 	page = new_slab(s, gfpflags, node);
+	c = get_cpu_ptr(s->cpu_slab);
 
 	if (unlikely(!page)) {
+		local_irq_restore(flags);
 		slab_out_of_memory(s, gfpflags, node);
 		return NULL;
 	}
 
-	c = raw_cpu_ptr(s->cpu_slab);
 	if (c->page)
 		flush_slab(s, c);
 
@@ -2747,31 +2752,33 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 return_single:
 
 	deactivate_slab(s, page, get_freepointer(s, freelist), c);
+	local_irq_restore(flags);
 	return freelist;
 }
 
 /*
- * Another one that disabled interrupt and compensates for possible
- * cpu changes by refetching the per cpu area pointer.
+ * A wrapper for ___slab_alloc() for contexts where preemption is not yet
+ * disabled. Compensates for possible cpu changes by refetching the per cpu area
+ * pointer.
  */
 static void *__slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 			  unsigned long addr, struct kmem_cache_cpu *c)
 {
 	void *p;
-	unsigned long flags;
 
-	local_irq_save(flags);
 #ifdef CONFIG_PREEMPTION
 	/*
 	 * We may have been preempted and rescheduled on a different
-	 * cpu before disabling interrupts. Need to reload cpu area
+	 * cpu before disabling preemption. Need to reload cpu area
 	 * pointer.
 	 */
-	c = this_cpu_ptr(s->cpu_slab);
+	c = get_cpu_ptr(s->cpu_slab);
 #endif
 
 	p = ___slab_alloc(s, gfpflags, node, addr, c);
-	local_irq_restore(flags);
+#ifdef CONFIG_PREEMPTION
+	put_cpu_ptr(s->cpu_slab);
+#endif
 	return p;
 }
 
@@ -3291,8 +3298,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 	 * IRQs, which protects against PREEMPT and interrupts
 	 * handlers invoking normal fastpath.
 	 */
+	c = get_cpu_ptr(s->cpu_slab);
 	local_irq_disable();
-	c = this_cpu_ptr(s->cpu_slab);
 
 	for (i = 0; i < size; i++) {
 		void *object = kfence_alloc(s, s->object_size, flags);
@@ -3313,6 +3320,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 			 */
 			c->tid = next_tid(c->tid);
 
+			local_irq_enable();
+
 			/*
 			 * Invoking slow path likely have side-effect
 			 * of re-populating per CPU c->freelist
@@ -3325,6 +3334,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 			c = this_cpu_ptr(s->cpu_slab);
 			maybe_wipe_obj_freeptr(s, p[i]);
 
+			local_irq_disable();
+
 			continue; /* goto for-loop */
 		}
 		c->freelist = get_freepointer(s, object);
@@ -3333,6 +3344,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 	}
 	c->tid = next_tid(c->tid);
 	local_irq_enable();
+	put_cpu_ptr(s->cpu_slab);
 
 	/*
 	 * memcg and kmem_cache debug support and memory initialization.
-- 
2.31.1


  parent reply	other threads:[~2021-06-09 11:40 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-09 11:38 [RFC v2 00/34] SLUB: reduce irq disabled scope and make it RT compatible Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 01/34] mm, slub: don't call flush_all() from list_locations() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 02/34] mm, slub: allocate private object map for sysfs listings Vlastimil Babka
2021-06-09 13:29   ` Christoph Lameter
2021-06-09 11:38 ` [RFC v2 03/34] mm, slub: allocate private object map for validate_slab_cache() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 04/34] mm, slub: don't disable irq for debug_check_no_locks_freed() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 05/34] mm, slub: remove redundant unfreeze_partials() from put_cpu_partial() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 06/34] mm, slub: unify cmpxchg_double_slab() and __cmpxchg_double_slab() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 07/34] mm, slub: extract get_partial() from new_slab_objects() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 08/34] mm, slub: dissolve new_slab_objects() into ___slab_alloc() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 09/34] mm, slub: return slab page from get_partial() and set c->page afterwards Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 10/34] mm, slub: restructure new page checks in ___slab_alloc() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 11/34] mm, slub: simplify kmem_cache_cpu and tid setup Vlastimil Babka
2021-06-09 11:38 ` Vlastimil Babka [this message]
2021-07-06  4:38   ` [RFC v2 12/34] mm, slub: move disabling/enabling irqs to ___slab_alloc() Mike Galbraith
2021-06-09 11:38 ` [RFC v2 13/34] mm, slub: do initial checks in ___slab_alloc() with irqs enabled Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 14/34] mm, slub: move disabling irqs closer to get_partial() in ___slab_alloc() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 15/34] mm, slub: restore irqs around calling new_slab() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 16/34] mm, slub: validate slab from partial list or page allocator before making it cpu slab Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 17/34] mm, slub: check new pages with restored irqs Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 18/34] mm, slub: stop disabling irqs around get_partial() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 19/34] mm, slub: move reset of c->page and freelist out of deactivate_slab() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 20/34] mm, slub: make locking in deactivate_slab() irq-safe Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 21/34] mm, slub: call deactivate_slab() without disabling irqs Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 22/34] mm, slub: move irq control into unfreeze_partials() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 23/34] mm, slub: discard slabs in unfreeze_partials() without irqs disabled Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 24/34] mm, slub: detach whole partial list at once in unfreeze_partials() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 25/34] mm, slub: detach percpu partial list in unfreeze_partials() using this_cpu_cmpxchg() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 26/34] mm, slub: only disable irq with spin_lock in __unfreeze_partials() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 27/34] mm, slub: don't disable irqs in slub_cpu_dead() Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 28/34] mm, slab: make flush_slab() possible to call with irqs enabled Vlastimil Babka
2021-06-09 11:38 ` [RFC v2 29/34] mm: slub: Move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context Vlastimil Babka
2021-06-09 22:29   ` Cyrill Gorcunov
2021-06-10  8:32     ` Vlastimil Babka
2021-06-10  8:36       ` Cyrill Gorcunov
2021-06-09 11:38 ` [RFC v2 30/34] mm: slub: Make object_map_lock a raw_spinlock_t Vlastimil Babka
2021-06-09 11:39 ` [RFC v2 31/34] mm, slub: optionally save/restore irqs in slab_[un]lock()/ Vlastimil Babka
2021-07-02 12:17   ` Sebastian Andrzej Siewior
2021-06-09 11:39 ` [RFC v2 32/34] mm, slub: make slab_lock() disable irqs with PREEMPT_RT Vlastimil Babka
2021-06-09 11:39 ` [RFC v2 33/34] mm, slub: use migrate_disable() on PREEMPT_RT Vlastimil Babka
2021-06-14 11:07   ` Vlastimil Babka
2021-06-14 11:16     ` Sebastian Andrzej Siewior
2021-06-14 11:33       ` Vlastimil Babka
2021-06-14 12:54         ` Vlastimil Babka
2021-06-14 14:01         ` Sebastian Andrzej Siewior
2021-06-09 11:39 ` [RFC v2 34/34] mm, slub: convert kmem_cpu_slab protection to local_lock Vlastimil Babka
2021-06-14  9:49 ` [RFC v2 00/34] SLUB: reduce irq disabled scope and make it RT compatible Mel Gorman
2021-06-14 11:31   ` Mel Gorman
2021-06-14 11:10 ` Vlastimil Babka
2021-07-02 18:29 ` Sebastian Andrzej Siewior
2021-07-02 20:25   ` Vlastimil Babka
2021-07-29 13:49     ` Sebastian Andrzej Siewior
2021-07-29 14:17       ` Vlastimil Babka
2021-07-29 14:37         ` Sebastian Andrzej Siewior
2021-07-03  7:24   ` Mike Galbraith
2021-07-03 15:47     ` Mike Galbraith
2021-07-04  5:37       ` Mike Galbraith
2021-07-18  7:41     ` Vlastimil Babka
2021-07-18  8:29       ` Mike Galbraith
2021-07-18 12:09         ` Mike Galbraith
2021-07-05 16:00   ` Mike Galbraith
2021-07-06 17:56     ` Mike Galbraith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210609113903.1421-13-vbabka@suse.cz \
    --to=vbabka@suse.cz \
    --cc=bigeasy@linutronix.de \
    --cc=brouer@redhat.com \
    --cc=cl@linux.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=jannh@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=penberg@kernel.org \
    --cc=peterz@infradead.org \
    --cc=rientjes@google.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).