From: Steen Hegelund <steen.hegelund@microchip.com>
To: Russell King <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Jonathan Corbet <corbet@lwn.net>,
<linux-doc@vger.kernel.org>
Cc: Steen Hegelund <steen.hegelund@microchip.com>,
Bjarni Jonasson <bjarni.jonasson@microchip.com>
Subject: [PATCH net-next 2/4] net: phy: Add 25G BASE-R interface mode
Date: Fri, 11 Jun 2021 14:54:51 +0200 [thread overview]
Message-ID: <20210611125453.313308-3-steen.hegelund@microchip.com> (raw)
In-Reply-To: <20210611125453.313308-1-steen.hegelund@microchip.com>
Add 25gbase-r phy interface mode
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
---
Documentation/networking/phy.rst | 6 ++++++
include/linux/phy.h | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 3f05d50ecd6e..571ba08386e7 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -292,6 +292,12 @@ Some of the interface modes are described below:
Note: due to legacy usage, some 10GBASE-R usage incorrectly makes
use of this definition.
+``PHY_INTERFACE_MODE_25GBASER``
+ This is the IEEE 802.3 PCS Clause 107 defined 25GBASE-R protocol.
+ The PCS is identical to 10GBASE-R, i.e. 64B/66B encoded
+ running 2.5 as fast, giving a fixed bit rate of 25.78125 Gbaud.
+ Please refer to the IEEE standard for further information.
+
``PHY_INTERFACE_MODE_100BASEX``
This defines IEEE 802.3 Clause 24. The link operates at a fixed data
rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ed332ac92e25..70a1399ff454 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -112,6 +112,7 @@ extern const int phy_10gbit_features_array[1];
* @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
* @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
* @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
+ * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR
* @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII
* @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
* @PHY_INTERFACE_MODE_MAX: Book keeping
@@ -147,6 +148,7 @@ typedef enum {
PHY_INTERFACE_MODE_XAUI,
/* 10GBASE-R, XFI, SFI - single lane 10G Serdes */
PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_25GBASER,
PHY_INTERFACE_MODE_USXGMII,
/* 10GBASE-KR - with Clause 73 AN */
PHY_INTERFACE_MODE_10GKR,
@@ -223,6 +225,8 @@ static inline const char *phy_modes(phy_interface_t interface)
return "xaui";
case PHY_INTERFACE_MODE_10GBASER:
return "10gbase-r";
+ case PHY_INTERFACE_MODE_25GBASER:
+ return "25gbase-r";
case PHY_INTERFACE_MODE_USXGMII:
return "usxgmii";
case PHY_INTERFACE_MODE_10GKR:
--
2.32.0
next prev parent reply other threads:[~2021-06-11 12:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 12:54 [PATCH net-next 0/4] Add 25G BASE-R support Steen Hegelund
2021-06-11 12:54 ` [PATCH net-next 1/4] dt-bindings: net: Add 25G BASE-R phy interface Steen Hegelund
2021-06-12 18:05 ` Andrew Lunn
2021-06-12 18:52 ` Russell King (Oracle)
2021-06-11 12:54 ` Steen Hegelund [this message]
2021-06-12 18:06 ` [PATCH net-next 2/4] net: phy: Add 25G BASE-R interface mode Andrew Lunn
2021-06-12 18:52 ` Russell King (Oracle)
2021-06-11 12:54 ` [PATCH net-next 3/4] net: sfp: add support for 25G BASE-R SFPs Steen Hegelund
2021-06-12 18:07 ` Andrew Lunn
2021-06-12 18:53 ` Russell King (Oracle)
2021-06-11 12:54 ` [PATCH net-next 4/4] net: phylink: Add 25G BASE-R support Steen Hegelund
2021-06-12 18:07 ` Andrew Lunn
2021-06-12 18:54 ` Russell King (Oracle)
2021-06-12 20:20 ` [PATCH net-next 0/4] " patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611125453.313308-3-steen.hegelund@microchip.com \
--to=steen.hegelund@microchip.com \
--cc=andrew@lunn.ch \
--cc=bjarni.jonasson@microchip.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).