linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Will Deacon <will@kernel.org>
To: Nadav Amit <nadav.amit@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>, Nadav Amit <namit@vmware.com>,
	Jiajun Cao <caojiajun@vmware.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Lu Baolu <baolu.lu@linux.intel.com>,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 4/6] iommu: Factor iommu_iotlb_gather_is_disjoint() out
Date: Fri, 11 Jun 2021 14:57:47 +0100	[thread overview]
Message-ID: <20210611135746.GC15776@willie-the-truck> (raw)
In-Reply-To: <20210607182541.119756-5-namit@vmware.com>

On Mon, Jun 07, 2021 at 11:25:39AM -0700, Nadav Amit wrote:
> From: Nadav Amit <namit@vmware.com>
> 
> Refactor iommu_iotlb_gather_add_page() and factor out the logic that
> detects whether IOTLB gather range and a new range are disjoint. To be
> used by the next patch that implements different gathering logic for
> AMD.
> 
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Will Deacon <will@kernel.org>
> Cc: Jiajun Cao <caojiajun@vmware.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-kernel@vger.kernel.org>
> Signed-off-by: Nadav Amit <namit@vmware.com>
> ---
>  include/linux/iommu.h | 41 +++++++++++++++++++++++++++++++++--------
>  1 file changed, 33 insertions(+), 8 deletions(-)

[...]

> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index f254c62f3720..b5a2bfc68fb0 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -497,6 +497,28 @@ static inline void iommu_iotlb_sync(struct iommu_domain *domain,
>  	iommu_iotlb_gather_init(iotlb_gather);
>  }
>  
> +/**
> + * iommu_iotlb_gather_is_disjoint - Checks whether a new range is disjoint
> + *
> + * @gather: TLB gather data
> + * @iova: start of page to invalidate
> + * @size: size of page to invalidate
> + *
> + * Helper for IOMMU drivers to check whether a new range is and the gathered
> + * range are disjoint. 

I can't quite parse this. Delete the "is"?

>     For many IOMMUs, flushing the IOMMU in this case is
> + * better than merging the two, which might lead to unnecessary invalidations.
> + */
> +static inline
> +bool iommu_iotlb_gather_is_disjoint(struct iommu_iotlb_gather *gather,
> +				    unsigned long iova, size_t size)
> +{
> +	unsigned long start = iova, end = start + size - 1;
> +
> +	return gather->end != 0 &&
> +		(end + 1 < gather->start || start > gather->end + 1);
> +}
> +
> +
>  /**
>   * iommu_iotlb_gather_add_range - Gather for address-based TLB invalidation
>   * @gather: TLB gather data
> @@ -533,20 +555,16 @@ static inline void iommu_iotlb_gather_add_page(struct iommu_domain *domain,
>  					       struct iommu_iotlb_gather *gather,
>  					       unsigned long iova, size_t size)
>  {
> -	unsigned long start = iova, end = start + size - 1;
> -
>  	/*
>  	 * If the new page is disjoint from the current range or is mapped at
>  	 * a different granularity, then sync the TLB so that the gather
>  	 * structure can be rewritten.
>  	 */
> -	if (gather->pgsize != size ||
> -	    end + 1 < gather->start || start > gather->end + 1) {
> -		if (gather->pgsize)
> -			iommu_iotlb_sync(domain, gather);
> -		gather->pgsize = size;
> -	}
> +	if ((gather->pgsize && gather->pgsize != size) ||
> +	    iommu_iotlb_gather_is_disjoint(gather, iova, size))
> +		iommu_iotlb_sync(domain, gather);
>  
> +	gather->pgsize = size;

Why have you made this unconditional? I think it's ok, but just not sure
if it's necessary or not.

Will

  reply	other threads:[~2021-06-11 13:57 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-07 18:25 [PATCH v3 0/6] iommu/amd: Enable page-selective flushes Nadav Amit
2021-06-07 18:25 ` [PATCH v3 1/6] iommu/amd: Selective flush on unmap Nadav Amit
2021-06-07 18:25 ` [PATCH v3 2/6] iommu/amd: Do not use flush-queue when NpCache is on Nadav Amit
2021-06-15 13:08   ` Robin Murphy
2021-06-15 18:26     ` Nadav Amit
2021-06-15 19:36       ` Robin Murphy
2021-06-07 18:25 ` [PATCH v3 3/6] iommu: Improve iommu_iotlb_gather helpers Nadav Amit
2021-06-11 13:50   ` Will Deacon
2021-06-15 10:42   ` Robin Murphy
2021-06-15 19:05     ` Nadav Amit
2021-06-15 19:07       ` Nadav Amit
2021-06-15 12:29   ` Yong Wu
2021-06-15 12:41     ` Robin Murphy
2021-06-07 18:25 ` [PATCH v3 4/6] iommu: Factor iommu_iotlb_gather_is_disjoint() out Nadav Amit
2021-06-11 13:57   ` Will Deacon [this message]
2021-06-11 16:50     ` Nadav Amit
2021-06-15 10:29       ` Will Deacon
2021-06-15 18:54         ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 5/6] iommu/amd: Tailored gather logic for AMD Nadav Amit
2021-06-15 12:55   ` Robin Murphy
2021-06-15 18:14     ` Nadav Amit
2021-06-15 19:20       ` Robin Murphy
2021-06-15 19:46         ` Nadav Amit
2021-06-07 18:25 ` [PATCH v3 6/6] iommu/amd: Sync once for scatter-gather operations Nadav Amit
2021-06-15 11:25   ` Robin Murphy
2021-06-15 18:51     ` Nadav Amit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210611135746.GC15776@willie-the-truck \
    --to=will@kernel.org \
    --cc=baolu.lu@linux.intel.com \
    --cc=caojiajun@vmware.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nadav.amit@gmail.com \
    --cc=namit@vmware.com \
    --cc=robin.murphy@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).