From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v6 1/5] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
Date: Tue, 15 Jun 2021 20:33:56 +1000 [thread overview]
Message-ID: <20210615103400.946-1-alistair@alistair23.me> (raw)
Initial support for the Silergy SY7636A Power Management chip
and regulator.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
.../bindings/mfd/silergy,sy7636a.yaml | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..9e50f57d5e8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+ - Alistair Francis <alistair@alistair23.me>
+
+properties:
+ compatible:
+ const: silergy,sy7636a
+
+ reg:
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ const: 0
+
+ epd-pwr-good-gpios:
+ description:
+ Specifying the power good GPIOs. As defined in bindings/gpio.txt.
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ properties:
+ compatible:
+ const: silergy,sy7636a-regulator
+
+ "vcom":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ regulator-name:
+ const: "vcom"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ compatible = "silergy,sy7636a-regulator";
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+...
--
2.31.1
next reply other threads:[~2021-06-15 10:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 10:33 Alistair Francis [this message]
2021-06-15 10:33 ` [PATCH v6 2/5] mfd: sy7636a: Initial commit Alistair Francis
2021-06-16 10:56 ` Lee Jones
2021-06-16 22:01 ` Alistair Francis
2021-06-17 9:20 ` Lee Jones
2021-07-08 11:16 ` Alistair Francis
2021-07-08 12:47 ` Lee Jones
2021-07-28 6:57 ` Alistair Francis
2021-08-02 8:45 ` Lee Jones
2021-06-15 10:33 ` [PATCH v6 3/5] regulator: " Alistair Francis
2021-06-15 10:33 ` [PATCH v6 4/5] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-06-15 10:34 ` [PATCH v6 5/5] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-06-15 17:29 ` (subset) [PATCH v6 1/5] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Mark Brown
2021-06-24 20:56 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615103400.946-1-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).