linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
	Samuel Holland <samuel@sholland.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-rtc@vger.kernel.org
Subject: [PATCH v7 04/19] rtc: sun6i: Add support for linear day storage
Date: Tue, 15 Jun 2021 12:06:21 +0100	[thread overview]
Message-ID: <20210615110636.23403-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20210615110636.23403-1-andre.przywara@arm.com>

Newer versions of the Allwinner RTC, as for instance found in the H616
SoC, no longer store a broken-down day/month/year representation in the
RTC_DAY_REG, but just a linear day number.
The user manual does not give any indication about the expected epoch
time of this day count, but the BSP kernel uses the UNIX epoch, which
allows easy support due to existing conversion functions in the kernel.

Allow tagging a compatible string with a flag, and use that to mark
those new RTCs. Then convert between a UNIX day number (converted into
seconds) and the broken-down day representation using mktime64() and
time64_to_tm() in the set_time/get_time functions.

That enables support for the RTC in those new chips.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/rtc/rtc-sun6i.c | 66 +++++++++++++++++++++++++++--------------
 1 file changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index adec1b14a8de..e4fc6e4f2bfb 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -110,6 +110,8 @@
 #define SUN6I_YEAR_MIN				1970
 #define SUN6I_YEAR_OFF				(SUN6I_YEAR_MIN - 1900)
 
+#define SEC_PER_DAY				(24 * 3600ULL)
+
 /*
  * There are other differences between models, including:
  *
@@ -133,12 +135,15 @@ struct sun6i_rtc_clk_data {
 	unsigned int has_auto_swt : 1;
 };
 
+#define RTC_LINEAR_DAY	BIT(0)
+
 struct sun6i_rtc_dev {
 	struct rtc_device *rtc;
 	const struct sun6i_rtc_clk_data *data;
 	void __iomem *base;
 	int irq;
 	unsigned long alarm;
+	unsigned long flags;
 
 	struct clk_hw hw;
 	struct clk_hw *int_osc;
@@ -467,22 +472,30 @@ static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 	} while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
 		 (time != readl(chip->base + SUN6I_RTC_HMS)));
 
+	if (chip->flags & RTC_LINEAR_DAY) {
+		/*
+		 * Newer chips store a linear day number, the manual
+		 * does not mandate any epoch base. The BSP driver uses
+		 * the UNIX epoch, let's just copy that, as it's the
+		 * easiest anyway.
+		 */
+		rtc_time64_to_tm((date & 0xffff) * SEC_PER_DAY, rtc_tm);
+	} else {
+		rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
+		rtc_tm->tm_mon  = SUN6I_DATE_GET_MON_VALUE(date) - 1;
+		rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
+
+		/*
+		 * switch from (data_year->min)-relative offset to
+		 * a (1900)-relative one
+		 */
+		rtc_tm->tm_year += SUN6I_YEAR_OFF;
+	}
+
 	rtc_tm->tm_sec  = SUN6I_TIME_GET_SEC_VALUE(time);
 	rtc_tm->tm_min  = SUN6I_TIME_GET_MIN_VALUE(time);
 	rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
 
-	rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
-	rtc_tm->tm_mon  = SUN6I_DATE_GET_MON_VALUE(date);
-	rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
-
-	rtc_tm->tm_mon  -= 1;
-
-	/*
-	 * switch from (data_year->min)-relative offset to
-	 * a (1900)-relative one
-	 */
-	rtc_tm->tm_year += SUN6I_YEAR_OFF;
-
 	return 0;
 }
 
@@ -571,20 +584,27 @@ static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
 	u32 date = 0;
 	u32 time = 0;
 
-	rtc_tm->tm_year -= SUN6I_YEAR_OFF;
-	rtc_tm->tm_mon += 1;
-
-	date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
-		SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
-		SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
-
-	if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
-		date |= SUN6I_LEAP_SET_VALUE(1);
-
 	time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
 		SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min)  |
 		SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
 
+	if (chip->flags & RTC_LINEAR_DAY) {
+		rtc_tm->tm_sec = 0;
+		rtc_tm->tm_min = 0;
+		rtc_tm->tm_hour = 0;
+		date = rtc_tm_to_time64(rtc_tm) / SEC_PER_DAY;
+	} else {
+		rtc_tm->tm_year -= SUN6I_YEAR_OFF;
+		rtc_tm->tm_mon += 1;
+
+		date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+			SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
+			SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
+
+		if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
+			date |= SUN6I_LEAP_SET_VALUE(1);
+	}
+
 	/* Check whether registers are writable */
 	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
 			   SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
@@ -678,6 +698,8 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, chip);
 
+	chip->flags = (unsigned long)of_device_get_match_data(&pdev->dev);
+
 	chip->irq = platform_get_irq(pdev, 0);
 	if (chip->irq < 0)
 		return chip->irq;
-- 
2.17.5


  parent reply	other threads:[~2021-06-15 11:07 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15 11:06 [PATCH v7 00/19] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-06-15 11:06 ` [PATCH v7 01/19] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara
2021-06-15 23:33   ` Rob Herring
2021-06-16 14:57     ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 02/19] mfd: axp20x: Allow AXP 806 chips without interrupt lines Andre Przywara
2021-06-15 11:06 ` [PATCH v7 03/19] dt-bindings: rtc: sun6i: Add H616 compatible string Andre Przywara
2021-06-15 23:35   ` Rob Herring
2021-06-16 14:59     ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara [this message]
2021-06-17 18:16   ` [PATCH v7 04/19] rtc: sun6i: Add support for linear day storage kernel test robot
2021-06-17 20:07   ` kernel test robot
2021-06-18 15:43     ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 05/19] rtc: sun6i: Add support for broken-down alarm registers Andre Przywara
2021-06-17 23:17   ` kernel test robot
2021-06-15 11:06 ` [PATCH v7 06/19] rtc: sun6i: Add support for RTCs without external LOSCs Andre Przywara
2021-06-16  9:14   ` Maxime Ripard
2021-06-16 10:14     ` Andre Przywara
2021-06-16 13:47       ` Maxime Ripard
2021-07-22 23:17     ` Andre Przywara
2021-07-26 14:59       ` Maxime Ripard
2021-07-29  8:04     ` Icenowy Zheng
2021-07-29 10:32       ` Maxime Ripard
2021-07-29 13:04         ` Icenowy Zheng
2021-06-15 11:06 ` [PATCH v7 07/19] rtc: sun6i: Add Allwinner H616 support Andre Przywara
2021-06-15 11:06 ` [PATCH v7 08/19] dt-bindings: net: sun8i-emac: Add H616 compatible string Andre Przywara
2021-06-15 11:06 ` [PATCH v7 09/19] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-06-15 11:06 ` [PATCH v7 10/19] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-06-15 11:06 ` [PATCH v7 11/19] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-06-15 11:06 ` [PATCH v7 12/19] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Andre Przywara
2021-06-15 11:06 ` [PATCH v7 13/19] phy: sun4i-usb: Allow reset line to be shared Andre Przywara
2021-06-15 11:25   ` Philipp Zabel
2021-06-15 11:06 ` [PATCH v7 14/19] phy: sun4i-usb: Introduce port2 SIDDQ quirk Andre Przywara
2021-06-21  4:36   ` Vinod Koul
2021-06-21  9:14     ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 15/19] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-07-12 16:50   ` Evgeny Boger
2021-06-15 11:06 ` [PATCH v7 16/19] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-06-16  9:23   ` Maxime Ripard
2021-06-16 10:06     ` Andre Przywara
2021-06-17 15:42       ` Maxime Ripard
2021-06-17 15:47         ` Jernej Škrabec
2021-06-15 11:06 ` [PATCH v7 17/19] dt-bindings: arm: sunxi: Add two H616 board compatible strings Andre Przywara
2021-06-16 17:38   ` Rob Herring
2021-06-15 11:06 ` [PATCH v7 18/19] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara
2021-06-15 11:06 ` [PATCH v7 19/19] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210615110636.23403-5-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=icenowy@aosc.io \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).