linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jack Yu <jack.yu@realtek.com>,
	Oder Chiou <oder_chiou@realtek.com>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	alsa-devel@alsa-project.org
Subject: [PATCH AUTOSEL 5.4 02/15] ASoC: rt5659: Fix the lost powers for the HDA header
Date: Tue, 15 Jun 2021 11:49:34 -0400	[thread overview]
Message-ID: <20210615154948.62711-2-sashal@kernel.org> (raw)
In-Reply-To: <20210615154948.62711-1-sashal@kernel.org>

From: Jack Yu <jack.yu@realtek.com>

[ Upstream commit 6308c44ed6eeadf65c0a7ba68d609773ed860fbb ]

The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after
the DAPM widgets were added, and these powers were set by the JD settings
"RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function,
these powers were ignored to prevent them controlled by DAPM.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5659.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index afd61599d94c..a28afb480060 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -2470,13 +2470,18 @@ static int set_dmic_power(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
-static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
+static const struct snd_soc_dapm_widget rt5659_particular_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("LDO2", RT5659_PWR_ANLG_3, RT5659_PWR_LDO2_BIT, 0,
 		NULL, 0),
-	SND_SOC_DAPM_SUPPLY("PLL", RT5659_PWR_ANLG_3, RT5659_PWR_PLL_BIT, 0,
-		NULL, 0),
+	SND_SOC_DAPM_SUPPLY("MICBIAS1", RT5659_PWR_ANLG_2, RT5659_PWR_MB1_BIT,
+		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("Mic Det Power", RT5659_PWR_VOL,
 		RT5659_PWR_MIC_DET_BIT, 0, NULL, 0),
+};
+
+static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("PLL", RT5659_PWR_ANLG_3, RT5659_PWR_PLL_BIT, 0,
+		NULL, 0),
 	SND_SOC_DAPM_SUPPLY("Mono Vref", RT5659_PWR_ANLG_1,
 		RT5659_PWR_VREF3_BIT, 0, NULL, 0),
 
@@ -2501,8 +2506,6 @@ static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
 		RT5659_ADC_MONO_R_ASRC_SFT, 0, NULL, 0),
 
 	/* Input Side */
-	SND_SOC_DAPM_SUPPLY("MICBIAS1", RT5659_PWR_ANLG_2, RT5659_PWR_MB1_BIT,
-		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("MICBIAS2", RT5659_PWR_ANLG_2, RT5659_PWR_MB2_BIT,
 		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("MICBIAS3", RT5659_PWR_ANLG_2, RT5659_PWR_MB3_BIT,
@@ -3697,10 +3700,23 @@ static int rt5659_set_bias_level(struct snd_soc_component *component,
 
 static int rt5659_probe(struct snd_soc_component *component)
 {
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_component_get_dapm(component);
 	struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
 
 	rt5659->component = component;
 
+	switch (rt5659->pdata.jd_src) {
+	case RT5659_JD_HDA_HEADER:
+		break;
+
+	default:
+		snd_soc_dapm_new_controls(dapm,
+			rt5659_particular_dapm_widgets,
+			ARRAY_SIZE(rt5659_particular_dapm_widgets));
+		break;
+	}
+
 	return 0;
 }
 
-- 
2.30.2


  reply	other threads:[~2021-06-15 15:52 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15 15:49 [PATCH AUTOSEL 5.4 01/15] regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting Sasha Levin
2021-06-15 15:49 ` Sasha Levin [this message]
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 03/15] NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 04/15] spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd() Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 05/15] NFSv4: Fix second deadlock in nfs4_evict_inode() Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 06/15] pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 07/15] drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device Sasha Levin
2021-06-15 16:26   ` Saravana Kannan
2021-06-20 12:56     ` Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 08/15] scsi: core: Fix error handling of scsi_host_alloc() Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 09/15] scsi: core: Fix failure handling of scsi_add_host_with_dma() Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 10/15] scsi: core: Put .shost_dev in failure path if host state changes to RUNNING Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 11/15] scsi: core: Only put parent device if host state differs from SHOST_CREATED Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 12/15] radeon: use memcpy_to/fromio for UVD fw upload Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 13/15] kvm: avoid speculation-based attacks from out-of-range memslot accesses Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 14/15] kvm: fix previous commit for 32-bit builds Sasha Levin
2021-06-15 15:49 ` [PATCH AUTOSEL 5.4 15/15] hwmon: (scpi-hwmon) shows the negative temperature properly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210615154948.62711-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=jack.yu@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oder_chiou@realtek.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).