From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
To: akpm@linux-foundation.org
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>,
linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 28/46] mm/writeback: Add filemap_dirty_folio()
Date: Tue, 22 Jun 2021 13:15:33 +0100 [thread overview]
Message-ID: <20210622121551.3398730-29-willy@infradead.org> (raw)
In-Reply-To: <20210622121551.3398730-1-willy@infradead.org>
Reimplement __set_page_dirty_nobuffers() as a wrapper around
filemap_dirty_folio(). This can use a cast to struct folio
because we know that the ->set_page_dirty address space op
is always called with a page pointer that happens to also be
a folio pointer. Saves 7 bytes of kernel text.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
---
include/linux/writeback.h | 1 +
mm/page-writeback.c | 64 ++++++++++++++++++++++-----------------
2 files changed, 37 insertions(+), 28 deletions(-)
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 8e5c5bb16e2d..aa372f6d2b55 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -398,6 +398,7 @@ void writeback_set_ratelimit(void);
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end);
+bool filemap_dirty_folio(struct address_space *mapping, struct folio *folio);
void account_page_redirty(struct page *page);
void sb_mark_inode_writeback(struct inode *inode);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index a7989870b171..64b989eff9f5 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2484,39 +2484,47 @@ void __folio_mark_dirty(struct folio *folio, struct address_space *mapping,
xa_unlock_irqrestore(&mapping->i_pages, flags);
}
-/*
- * For address_spaces which do not use buffers. Just tag the page as dirty in
- * the xarray.
- *
- * This is also used when a single buffer is being dirtied: we want to set the
- * page dirty in that case, but not all the buffers. This is a "bottom-up"
- * dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
- *
- * The caller must ensure this doesn't race with truncation. Most will simply
- * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
- * the pte lock held, which also locks out truncation.
+/**
+ * filemap_dirty_folio - Mark a folio dirty for filesystems which do not use buffer_heads.
+ * @mapping: Address space this folio belongs to.
+ * @folio: Folio to be marked as dirty.
+ *
+ * Filesystems which do not use buffer heads should call this function
+ * from their set_page_dirty address space operation. It ignores the
+ * contents of folio_private(), so if the filesystem marks individual
+ * blocks as dirty, the filesystem should handle that itself.
+ *
+ * This is also sometimes used by filesystems which use buffer_heads when
+ * a single buffer is being dirtied: we want to set the folio dirty in
+ * that case, but not all the buffers. This is a "bottom-up" dirtying,
+ * whereas __set_page_dirty_buffers() is a "top-down" dirtying.
+ *
+ * The caller must ensure this doesn't race with truncation. Most will
+ * simply hold the folio lock, but e.g. zap_pte_range() calls with the
+ * folio mapped and the pte lock held, which also locks out truncation.
*/
-int __set_page_dirty_nobuffers(struct page *page)
+bool filemap_dirty_folio(struct address_space *mapping, struct folio *folio)
{
- lock_page_memcg(page);
- if (!TestSetPageDirty(page)) {
- struct address_space *mapping = page_mapping(page);
+ lock_folio_memcg(folio);
+ if (folio_test_set_dirty_flag(folio)) {
+ unlock_folio_memcg(folio);
+ return false;
+ }
- if (!mapping) {
- unlock_page_memcg(page);
- return 1;
- }
- __set_page_dirty(page, mapping, !PagePrivate(page));
- unlock_page_memcg(page);
+ __folio_mark_dirty(folio, mapping, !folio_private(folio));
+ unlock_folio_memcg(folio);
- if (mapping->host) {
- /* !PageAnon && !swapper_space */
- __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
- }
- return 1;
+ if (mapping->host) {
+ /* !PageAnon && !swapper_space */
+ __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
- unlock_page_memcg(page);
- return 0;
+ return true;
+}
+EXPORT_SYMBOL(filemap_dirty_folio);
+
+int __set_page_dirty_nobuffers(struct page *page)
+{
+ return filemap_dirty_folio(page_mapping(page), (struct folio *)page);
}
EXPORT_SYMBOL(__set_page_dirty_nobuffers);
--
2.30.2
next prev parent reply other threads:[~2021-06-22 12:42 UTC|newest]
Thread overview: 128+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-22 12:15 [PATCH v2 00/46] Folio-enabling the page cache Matthew Wilcox (Oracle)
2021-06-22 12:15 ` [PATCH v2 01/46] mm: Add folio_to_pfn() Matthew Wilcox (Oracle)
2021-06-23 7:49 ` Christoph Hellwig
2021-06-24 15:12 ` Matthew Wilcox
2021-06-28 6:18 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 02/46] mm: Add folio_rmapping() Matthew Wilcox (Oracle)
2021-06-23 7:56 ` Christoph Hellwig
2021-06-24 15:51 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 03/46] mm: Add kmap_local_folio() Matthew Wilcox (Oracle)
2021-06-23 7:58 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 04/46] mm: Add flush_dcache_folio() Matthew Wilcox (Oracle)
2021-06-22 12:15 ` [PATCH v2 05/46] mm: Add arch_make_folio_accessible() Matthew Wilcox (Oracle)
2021-06-23 8:00 ` Christoph Hellwig
2021-06-24 15:57 ` Matthew Wilcox
2021-06-28 6:21 ` Christoph Hellwig
2021-06-28 14:07 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 06/46] mm: Add folio_young() and folio_idle() Matthew Wilcox (Oracle)
2021-06-22 12:15 ` [PATCH v2 07/46] mm/workingset: Convert workingset_activation to take a folio Matthew Wilcox (Oracle)
2021-06-23 8:02 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 08/46] mm/swap: Add folio_activate() Matthew Wilcox (Oracle)
2021-06-23 8:04 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 09/46] mm/swap: Add folio_mark_accessed() Matthew Wilcox (Oracle)
2021-06-23 8:07 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 10/46] mm/rmap: Add folio_mkclean() Matthew Wilcox (Oracle)
2021-06-23 8:08 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 11/46] mm/memcg: Remove 'page' parameter to mem_cgroup_charge_statistics() Matthew Wilcox (Oracle)
2021-06-23 8:09 ` Christoph Hellwig
2021-06-25 7:58 ` Michal Hocko
2021-06-22 12:15 ` [PATCH v2 12/46] mm/memcg: Use the node id in mem_cgroup_update_tree() Matthew Wilcox (Oracle)
2021-06-23 8:12 ` Christoph Hellwig
2021-06-24 16:19 ` Matthew Wilcox
2021-06-25 8:05 ` Michal Hocko
2021-06-22 12:15 ` [PATCH v2 13/46] mm/memcg: Convert commit_charge() to take a folio Matthew Wilcox (Oracle)
2021-06-23 8:13 ` Christoph Hellwig
2021-06-25 8:11 ` Michal Hocko
2021-06-22 12:15 ` [PATCH v2 14/46] mm/memcg: Add folio_charge_cgroup() Matthew Wilcox (Oracle)
2021-06-23 8:15 ` Christoph Hellwig
2021-06-24 16:42 ` Matthew Wilcox
2021-06-25 8:22 ` Michal Hocko
2021-06-25 11:34 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 15/46] mm/memcg: Add folio_uncharge_cgroup() Matthew Wilcox (Oracle)
2021-06-23 8:16 ` Christoph Hellwig
2021-06-25 8:25 ` Michal Hocko
2021-06-25 11:21 ` Matthew Wilcox
2021-06-25 13:21 ` Michal Hocko
2021-06-22 12:15 ` [PATCH v2 16/46] mm/memcg: Add folio_migrate_cgroup() Matthew Wilcox (Oracle)
2021-06-23 8:19 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 17/46] mm/memcg: Convert mem_cgroup_track_foreign_dirty_slowpath() to folio Matthew Wilcox (Oracle)
2021-06-23 8:21 ` Christoph Hellwig
2021-06-24 17:37 ` Matthew Wilcox
2021-06-28 6:24 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 18/46] mm/migrate: Add folio_migrate_mapping() Matthew Wilcox (Oracle)
2021-06-23 8:22 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 19/46] mm/migrate: Add folio_migrate_flags() Matthew Wilcox (Oracle)
2021-06-23 8:28 ` Christoph Hellwig
2021-06-24 17:55 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 20/46] mm/migrate: Add folio_migrate_copy() Matthew Wilcox (Oracle)
2021-06-23 8:35 ` Christoph Hellwig
2021-06-24 18:02 ` Matthew Wilcox
2021-06-28 6:26 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 21/46] mm/writeback: Rename __add_wb_stat() to wb_stat_mod() Matthew Wilcox (Oracle)
2021-06-23 8:37 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 22/46] flex_proportions: Allow N events instead of 1 Matthew Wilcox (Oracle)
2021-06-23 8:41 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 23/46] mm/writeback: Change __wb_writeout_inc() to __wb_writeout_add() Matthew Wilcox (Oracle)
2021-06-23 8:45 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 24/46] mm/writeback: Add __folio_end_writeback() Matthew Wilcox (Oracle)
2021-06-23 9:15 ` Christoph Hellwig
2021-06-24 18:20 ` Matthew Wilcox
2021-06-28 6:33 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 25/46] mm/writeback: Add folio_start_writeback() Matthew Wilcox (Oracle)
2021-06-23 9:18 ` Christoph Hellwig
2021-06-24 18:33 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 26/46] mm/writeback: Add folio_mark_dirty() Matthew Wilcox (Oracle)
2021-06-23 9:21 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 27/46] mm/writeback: Add __folio_mark_dirty() Matthew Wilcox (Oracle)
2021-06-23 9:27 ` Christoph Hellwig
2021-06-24 18:37 ` Matthew Wilcox
2021-06-28 6:03 ` Christoph Hellwig
2021-06-28 15:43 ` Matthew Wilcox
2021-06-22 12:15 ` Matthew Wilcox (Oracle) [this message]
2021-06-23 9:32 ` [PATCH v2 28/46] mm/writeback: Add filemap_dirty_folio() Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 29/46] mm/writeback: Add folio_account_cleaned() Matthew Wilcox (Oracle)
2021-06-23 9:36 ` Christoph Hellwig
2021-06-24 20:06 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 30/46] mm/writeback: Add folio_cancel_dirty() Matthew Wilcox (Oracle)
2021-06-23 9:39 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 31/46] mm/writeback: Add folio_clear_dirty_for_io() Matthew Wilcox (Oracle)
2021-06-23 9:43 ` Christoph Hellwig
2021-06-24 20:09 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 32/46] mm/writeback: Add folio_account_redirty() Matthew Wilcox (Oracle)
2021-06-23 9:44 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 33/46] mm/writeback: Add folio_redirty_for_writepage() Matthew Wilcox (Oracle)
2021-06-23 9:45 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 34/46] mm/filemap: Add i_blocks_per_folio() Matthew Wilcox (Oracle)
2021-06-23 9:46 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 35/46] mm/filemap: Add folio_mkwrite_check_truncate() Matthew Wilcox (Oracle)
2021-06-23 9:47 ` Christoph Hellwig
2021-06-23 13:19 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 36/46] mm/filemap: Add readahead_folio() Matthew Wilcox (Oracle)
2021-06-23 9:50 ` Christoph Hellwig
2021-06-24 23:46 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 37/46] mm/workingset: Convert workingset_refault() to take a folio Matthew Wilcox (Oracle)
2021-06-23 9:52 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 38/46] mm: Add folio_evictable() Matthew Wilcox (Oracle)
2021-06-23 9:54 ` Christoph Hellwig
2021-06-24 23:50 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 39/46] mm/lru: Convert __pagevec_lru_add_fn to take a folio Matthew Wilcox (Oracle)
2021-06-23 9:55 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 40/46] mm/lru: Add folio_add_lru() Matthew Wilcox (Oracle)
2021-06-23 9:56 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 41/46] mm/page_alloc: Add folio allocation functions Matthew Wilcox (Oracle)
2021-06-23 9:58 ` Christoph Hellwig
2021-06-25 1:06 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 42/46] mm/filemap: Add filemap_alloc_folio Matthew Wilcox (Oracle)
2021-06-23 9:59 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 43/46] mm/filemap: Add filemap_add_folio Matthew Wilcox (Oracle)
2021-06-23 11:30 ` Christoph Hellwig
2021-06-25 1:57 ` Matthew Wilcox
2021-06-22 12:15 ` [PATCH v2 44/46] mm/filemap: Convert mapping_get_entry to return a folio Matthew Wilcox (Oracle)
2021-06-23 11:32 ` Christoph Hellwig
2021-06-25 3:29 ` Matthew Wilcox
2021-06-28 6:07 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 45/46] mm/filemap: Add filemap_get_folio Matthew Wilcox (Oracle)
2021-06-23 11:39 ` Christoph Hellwig
2021-06-22 12:15 ` [PATCH v2 46/46] mm/filemap: Add FGP_STABLE Matthew Wilcox (Oracle)
2021-06-23 11:43 ` Christoph Hellwig
2021-06-23 12:15 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210622121551.3398730-29-willy@infradead.org \
--to=willy@infradead.org \
--cc=akpm@linux-foundation.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).