From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>,
"Marek Behún" <kabel@kernel.org>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/10] arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
Date: Fri, 25 Jun 2021 00:49:04 +0200 [thread overview]
Message-ID: <20210624224909.6350-6-pali@kernel.org> (raw)
In-Reply-To: <20210624224909.6350-1-pali@kernel.org>
UART1 (standard variant with DT node name 'uart0') has register space
0x12000-0x12018 and not whole size 0x200. So fix also this in example.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: c737abc193d1 ("arm64: dts: marvell: Fix A37xx UART0 register size")
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 6897f1f7a7f0..20dd9d9e9d58 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -134,7 +134,7 @@
uart0: serial@12000 {
compatible = "marvell,armada-3700-uart";
- reg = <0x12000 0x200>;
+ reg = <0x12000 0x18>;
clocks = <&xtalclk>;
interrupts =
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
--
2.20.1
next prev parent reply other threads:[~2021-06-24 22:50 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 22:48 [PATCH 00/10] serial: mvebu-uart: Fixes and new support for higher baudrates Pali Rohár
2021-06-24 22:49 ` [PATCH 01/10] serial: mvebu-uart: fix calculation of clock divisor Pali Rohár
2021-06-24 22:49 ` [PATCH 02/10] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available Pali Rohár
2021-06-24 22:49 ` [PATCH 03/10] serial: mvebu-uart: correctly calculate minimal possible baudrate Pali Rohár
2021-06-24 22:49 ` [PATCH 04/10] dt-bindings: mvebu-uart: fix documentation Pali Rohár
2021-06-24 22:49 ` Pali Rohár [this message]
2021-06-24 22:49 ` [PATCH 06/10] serial: mvebu-uart: remove unused member nb from struct mvebu_uart Pali Rohár
2021-06-24 22:49 ` [PATCH 07/10] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-06-24 22:49 ` [PATCH 08/10] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-06-24 22:49 ` [PATCH 09/10] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-06-24 22:49 ` [PATCH 10/10] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-06-25 14:36 ` [PATCH v2 00/11] serial: mvebu-uart: Fixes and new support for higher baudrates Pali Rohár
2021-06-25 14:36 ` [PATCH v2 01/11] serial: mvebu-uart: fix calculation of clock divisor Pali Rohár
2021-06-25 14:36 ` [PATCH v2 02/11] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available Pali Rohár
2021-06-25 14:36 ` [PATCH v2 03/11] serial: mvebu-uart: correctly calculate minimal possible baudrate Pali Rohár
2021-06-25 14:36 ` [PATCH v2 04/11] dt-bindings: mvebu-uart: fix documentation Pali Rohár
2021-06-25 14:36 ` [PATCH v2 05/11] arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART Pali Rohár
2021-06-25 14:36 ` [PATCH v2 06/11] serial: mvebu-uart: remove unused member nb from struct mvebu_uart Pali Rohár
2021-06-25 14:36 ` [PATCH v2 07/11] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-06-25 15:22 ` Geert Uytterhoeven
2021-06-25 15:38 ` Pali Rohár
2021-06-25 15:50 ` Willy Tarreau
2021-06-25 17:39 ` Geert Uytterhoeven
2021-06-25 17:44 ` Pali Rohár
2021-06-25 18:11 ` Geert Uytterhoeven
2021-07-19 12:45 ` Andy Shevchenko
2021-06-25 14:36 ` [PATCH v2 08/11] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-06-25 14:36 ` [PATCH v2 09/11] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-06-25 14:36 ` [PATCH v2 10/11] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-06-25 14:36 ` [PATCH v2 11/11] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-07-17 12:38 ` [PATCH v3 0/5] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-07-17 12:38 ` [PATCH v3 1/5] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-07-19 12:47 ` Andy Shevchenko
2021-07-22 21:57 ` Pali Rohár
2021-07-24 11:38 ` David Laight
2021-07-17 12:38 ` [PATCH v3 2/5] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-07-17 17:26 ` Andrew Lunn
2021-07-17 18:05 ` Pali Rohár
2021-07-24 9:48 ` Pali Rohár
2021-07-24 16:33 ` Andrew Lunn
2021-07-25 12:14 ` Pali Rohár
2021-07-17 12:38 ` [PATCH v3 3/5] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-07-17 17:30 ` [PATCH v3 3/5] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Andrew Lunn
2021-08-02 14:45 ` Pali Rohár
2021-07-17 12:38 ` [PATCH v3 4/5] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-07-17 12:38 ` [PATCH v3 5/5] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-02 14:45 ` [PATCH v4 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-02 14:45 ` [PATCH v4 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-08-02 14:45 ` [PATCH v4 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-08-02 14:45 ` [PATCH v4 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-08-06 0:30 ` Stephen Boyd
2021-08-06 8:28 ` Pali Rohár
2021-08-12 19:33 ` Stephen Boyd
2021-08-12 20:08 ` Pali Rohár
2021-08-02 14:45 ` [PATCH v4 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-08-02 14:45 ` [PATCH v4 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-08-02 14:45 ` [PATCH v4 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-09 14:53 ` [PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-09 14:53 ` [PATCH v5 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-08-09 14:53 ` [PATCH v5 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-08-09 14:53 ` [PATCH v5 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-08-09 14:53 ` [PATCH v5 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-08-09 14:53 ` [PATCH v5 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-08-09 14:53 ` [PATCH v5 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-20 17:22 ` [PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-31 8:35 ` Pali Rohár
2021-09-21 7:41 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210624224909.6350-6-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).