From: "Pali Rohár" <pali@kernel.org> To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Bjorn Helgaas <bhelgaas@google.com>, Rob Herring <robh@kernel.org> Cc: "Marek Behún" <kabel@kernel.org>, "Marc Zyngier" <maz@kernel.org>, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 7/7] PCI: aardvark: Fix setting MSI address Date: Fri, 25 Jun 2021 11:03:19 +0200 [thread overview] Message-ID: <20210625090319.10220-8-pali@kernel.org> (raw) In-Reply-To: <20210625090319.10220-1-pali@kernel.org> MSI address for receiving MSI interrupts needs to be correctly set before enabling processing of MSI interrupts. Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG registers with MSI address from advk_pcie_init_msi_irq_domain() function to advk_pcie_setup_hw() function before enabling PCIE_CORE_CTRL2_MSI_ENABLE. As part of this change, also remove unused variable msi_msg, which was used only for MSI doorbell address. MSI address can be any address which cannot be used to DMA to. So change it to the address of the main struct advk_pcie Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") --- drivers/pci/controller/pci-aardvark.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 7cad6d989f6c..84ecc418e6be 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -244,7 +244,6 @@ struct advk_pcie { struct msi_domain_info msi_domain_info; DECLARE_BITMAP(msi_used, MSI_IRQ_NUM); struct mutex msi_used_lock; - u16 msi_msg; int link_gen; struct pci_bridge_emul bridge; struct gpio_desc *reset_gpio; @@ -403,6 +402,7 @@ static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num) static void advk_pcie_setup_hw(struct advk_pcie *pcie) { + phys_addr_t msi_addr; u32 reg; int i; @@ -465,6 +465,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) reg |= LANE_COUNT_1; advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); + /* Set MSI address */ + msi_addr = virt_to_phys(pcie); + advk_writel(pcie, lower_32_bits(msi_addr), PCIE_MSI_ADDR_LOW_REG); + advk_writel(pcie, upper_32_bits(msi_addr), PCIE_MSI_ADDR_HIGH_REG); + /* Enable MSI */ reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG); reg |= PCIE_CORE_CTRL2_MSI_ENABLE; @@ -982,10 +987,10 @@ static void advk_msi_irq_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) { struct advk_pcie *pcie = irq_data_get_irq_chip_data(data); - phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg); + phys_addr_t msi_addr = virt_to_phys(pcie); - msg->address_lo = lower_32_bits(msi_msg); - msg->address_hi = upper_32_bits(msi_msg); + msg->address_lo = lower_32_bits(msi_addr); + msg->address_hi = upper_32_bits(msi_addr); msg->data = data->hwirq; } @@ -1080,7 +1085,6 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) struct device_node *node = dev->of_node; struct irq_chip *bottom_ic, *msi_ic; struct msi_domain_info *msi_di; - phys_addr_t msi_msg_phys; mutex_init(&pcie->msi_used_lock); @@ -1098,13 +1102,6 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie) MSI_FLAG_MULTI_PCI_MSI; msi_di->chip = msi_ic; - msi_msg_phys = virt_to_phys(&pcie->msi_msg); - - advk_writel(pcie, lower_32_bits(msi_msg_phys), - PCIE_MSI_ADDR_LOW_REG); - advk_writel(pcie, upper_32_bits(msi_msg_phys), - PCIE_MSI_ADDR_HIGH_REG); - pcie->msi_inner_domain = irq_domain_add_linear(NULL, MSI_IRQ_NUM, &advk_msi_domain_ops, pcie); -- 2.20.1
next prev parent reply other threads:[~2021-06-25 9:05 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-25 9:03 [PATCH 0/7] PCI: aardvark: Interrupt fixes Pali Rohár 2021-06-25 9:03 ` [PATCH 1/7] PCI: aardvark: Do not touch status bits of masked interrupts in interrupt handler Pali Rohár 2021-06-25 9:03 ` [PATCH 2/7] PCI: aardvark: Check for virq mapping when processing INTx IRQ Pali Rohár 2021-08-06 8:29 ` Marc Zyngier 2021-08-23 16:33 ` Pali Rohár 2021-08-23 16:47 ` Marc Zyngier 2021-06-25 9:03 ` [PATCH 3/7] PCI: aardvark: Remove irq_mask_ack callback for INTx interrupts Pali Rohár 2021-06-25 9:03 ` [PATCH 4/7] PCI: aardvark: Don't mask irq when mapping Pali Rohár 2021-06-25 9:03 ` [PATCH 5/7] PCI: aardvark: Fix support for MSI interrupts Pali Rohár 2021-06-25 9:03 ` [PATCH 6/7] PCI: aardvark: Correctly clear and unmask all " Pali Rohár 2021-08-06 8:32 ` Marc Zyngier 2021-08-06 8:35 ` Pali Rohár 2021-08-23 16:42 ` Pali Rohár 2021-06-25 9:03 ` Pali Rohár [this message] 2021-08-05 17:35 ` [PATCH 0/7] PCI: aardvark: Interrupt fixes Pali Rohár
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210625090319.10220-8-pali@kernel.org \ --to=pali@kernel.org \ --cc=bhelgaas@google.com \ --cc=kabel@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=maz@kernel.org \ --cc=robh@kernel.org \ --cc=thomas.petazzoni@bootlin.com \ --subject='Re: [PATCH 7/7] PCI: aardvark: Fix setting MSI address' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).