[PATCH 4.14 00/88] 4.14.238-rc1 review

[PATCH 4.14 00/88] 4.14.238-rc1 review

[Sasha Levin]

This is the start of the stable review cycle for the 4.14.238 release.
There are 88 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed 30 Jun 2021 02:36:04 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.237
or in the git tree and branch at:
        git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

Thanks,
Sasha

-------------
Pseudo-Shortlog of commits:

Al Viro (2):
  kernfs: deal with kernfs_fill_super() failures
  unfuck sysfs_mount()

Andrew Lunn (1):
  usb: core: hub: Disable autosuspend for Cypress CY7C65632

Andrew Morton (1):
  mm/slub.c: include swab.h

Anirudh Rayabharam (1):
  HID: usbhid: fix info leak in hid_submit_ctrl

Antti Järvinen (1):
  PCI: Mark TI C667X to avoid bus reset

Arnd Bergmann (1):
  ARM: 9081/1: fix gcc-10 thumb2-kernel regression

Bixuan Cui (1):
  HID: gt683r: add missing MODULE_DEVICE_TABLE

Bumyong Lee (1):
  dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc

Chen Li (1):
  radeon: use memcpy_to/fromio for UVD fw upload

Chengyang Fan (1):
  net: ipv4: fix memory leak in ip_mc_add1_src

Chiqijun (1):
  PCI: Work around Huawei Intelligent NIC VF FLR erratum

Christian König (2):
  drm/nouveau: wait for moving fence after pinning v2
  drm/radeon: wait for moving fence after pinning

Christophe JAILLET (4):
  alx: Fix an error handling path in 'alx_probe()'
  qlcnic: Fix an error handling path in 'qlcnic_probe()'
  netxen_nic: Fix an error handling path in 'netxen_nic_probe()'
  be2net: Fix an error handling path in 'be_probe()'

Dan Robertson (1):
  net: ieee802154: fix null deref in parse dev addr

Dongliang Mu (1):
  net: usb: fix possible use-after-free in smsc75xx_bind

Du Cheng (1):
  cfg80211: call cfg80211_leave_ocb when switching away from OCB

Eric Dumazet (5):
  net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock
  inet: use bigger hash table for IP ID generation
  inet: annotate date races around sk->sk_txhash
  net/packet: annotate accesses to po->bind
  net/packet: annotate accesses to po->ifindex

Esben Haabendal (1):
  net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY

Fabien Dessenne (1):
  pinctrl: stm32: fix the reported number of GPIO lines per bank

Fugang Duan (1):
  net: fec_ptp: add clock rate zero check

Hannes Reinecke (3):
  nvme-loop: reset queue count to 1 in nvme_loop_destroy_io_queues()
  nvme-loop: clear NVME_LOOP_Q_LIVE when
    nvme_loop_configure_admin_queue() fails
  nvme-loop: check for NVME_LOOP_Q_LIVE in
    nvme_loop_destroy_admin_queue()

Hillf Danton (1):
  gfs2: Fix use-after-free in gfs2_glock_shrink_scan

Ido Schimmel (1):
  rtnetlink: Fix regression in bridge VLAN configuration

Jiapeng Chong (2):
  ethernet: myri10ge: Fix missing error code in myri10ge_probe()
  rtnetlink: Fix missing error code in rtnl_bridge_notify()

Jisheng Zhang (1):
  net: stmmac: dwmac1000: Fix extended MAC address registers definition

Johan Hovold (1):
  i2c: robotfuzz-osif: fix control-request directions

Johannes Berg (2):
  mac80211: remove warning in ieee80211_get_sband()
  mac80211: drop multicast fragments

Josh Triplett (1):
  net: ipconfig: Don't override command-line hostnames or domains

Kees Cook (4):
  r8152: Avoid memcpy() over-reading of ETH_SS_STATS
  sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS
  r8169: Avoid memcpy() over-reading of ETH_SS_STATS
  net: qed: Fix memcpy() overflow of qed_dcbx_params()

Linyu Yuan (1):
  net: cdc_eem: fix tx fixup skb leak

Maciej Żenczykowski (1):
  net: cdc_ncm: switch to eth%d interface naming

Mark Bolhuis (1):
  HID: Add BUS_VIRTUAL to hid_connect logging

Maurizio Lombardi (1):
  scsi: target: core: Fix warning on realtime kernels

Maxim Mikityanskiy (1):
  netfilter: synproxy: Fix out of bounds when parsing TCP options

Nanyong Sun (1):
  net: ipv4: fix memory leak in netlbl_cipsov4_add_std

Nathan Chancellor (2):
  Makefile: Move -Wno-unused-but-set-variable out of GCC only block
  MIPS: generic: Update node names to avoid unit addresses

Nikolay Aleksandrov (2):
  net: bridge: fix vlan tunnel dst null pointer dereference
  net: bridge: fix vlan tunnel dst refcnt when egressing

Norbert Slusarek (1):
  can: bcm: fix infoleak in struct bcm_msg_head

Paolo Abeni (1):
  udp: fix race between close() and udp_abort()

Pavel Skripkin (6):
  net: rds: fix memory leak in rds_recvmsg
  net: hamradio: fix memory leak in mkiss_close
  net: ethernet: fix potential use-after-free in ec_bhf_remove
  can: mcba_usb: fix memory leak in mcba_usb
  net: caif: fix memory leak in ldisc_open
  nilfs2: fix memory leak in nilfs_sysfs_delete_device_group

Peter Chen (1):
  usb: dwc3: core: fix kernel panic when do reboot

Rafael J. Wysocki (1):
  Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"

Randy Dunlap (2):
  dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
  dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM

Riwen Lu (1):
  hwmon: (scpi-hwmon) shows the negative temperature properly

Sasha Levin (1):
  Linux 4.14.238-rc1

Shanker Donthineni (1):
  PCI: Mark some NVIDIA GPUs to avoid bus reset

Sriharsha Basavapatna (1):
  PCI: Add ACS quirk for Broadcom BCM57414 NIC

Srinivas Pandruvada (1):
  HID: hid-sensor-hub: Return error for hid_set_field() failure

Steven Rostedt (VMware) (3):
  tracing: Do not stop recording cmdlines when tracing is off
  tracing: Do not stop recording comms if the trace file is being read
  tracing: Do no increment trace_clock_global() by one

Suzuki K Poulose (1):
  arm64: perf: Disable PMU while processing counter overflows

Sven Eckelmann (1):
  batman-adv: Avoid WARN_ON timing related checks

Tetsuo Handa (1):
  can: bcm/raw/isotp: use per module netdevice notifier

Thomas Gleixner (1):
  x86/fpu: Reset state for all signal restore failures

Toke Høiland-Jørgensen (1):
  icmp: don't send out ICMP messages with a source address of 0.0.0.0

Vineet Gupta (1):
  ARCv2: save ABI registers across signal handling

Yang Yingliang (1):
  dmaengine: stedma40: add missing iounmap() on error in d40_probe()

Yongqiang Liu (1):
  ARM: OMAP2+: Fix build warning when mmc_omap is not built

Zheng Yongjun (4):
  net/x25: Return the correct errno code
  net: Return the correct errno code
  fib: Return the correct errno code
  ping: Check return value of function 'ping_queue_rcv_skb'

yangerkun (1):
  mm/memory-failure: make sure wait for page writeback in memory_failure

 Makefile                                      |  7 +-
 arch/arc/include/uapi/asm/sigcontext.h        |  1 +
 arch/arc/kernel/signal.c                      | 43 +++++++++
 arch/arm/kernel/setup.c                       | 16 ++--
 arch/arm/mach-omap2/board-n8x0.c              |  2 +-
 arch/arm64/kernel/perf_event.c                | 50 ++++++-----
 arch/mips/generic/board-boston.its.S          | 10 +--
 arch/mips/generic/board-ni169445.its.S        | 10 +--
 arch/mips/generic/vmlinux.its.S               | 10 +--
 arch/x86/kernel/fpu/signal.c                  | 31 ++++---
 drivers/dma/Kconfig                           |  1 +
 drivers/dma/pl330.c                           |  6 +-
 drivers/dma/qcom/Kconfig                      |  1 +
 drivers/dma/ste_dma40.c                       |  3 +
 drivers/gpu/drm/nouveau/nouveau_prime.c       | 17 +++-
 drivers/gpu/drm/radeon/radeon_prime.c         | 16 +++-
 drivers/gpu/drm/radeon/radeon_uvd.c           |  4 +-
 drivers/hid/hid-core.c                        |  3 +
 drivers/hid/hid-gt683r.c                      |  1 +
 drivers/hid/hid-sensor-hub.c                  | 13 ++-
 drivers/hid/usbhid/hid-core.c                 |  2 +-
 drivers/hwmon/scpi-hwmon.c                    |  9 ++
 drivers/i2c/busses/i2c-robotfuzz-osif.c       |  4 +-
 drivers/net/caif/caif_serial.c                |  1 +
 drivers/net/can/usb/mcba_usb.c                | 17 +++-
 drivers/net/ethernet/atheros/alx/main.c       |  1 +
 drivers/net/ethernet/ec_bhf.c                 |  4 +-
 drivers/net/ethernet/emulex/benet/be_main.c   |  1 +
 drivers/net/ethernet/freescale/fec_ptp.c      |  4 +
 .../net/ethernet/myricom/myri10ge/myri10ge.c  |  1 +
 .../ethernet/qlogic/netxen/netxen_nic_main.c  |  2 +
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c    |  4 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_main.c  |  1 +
 drivers/net/ethernet/realtek/r8169.c          |  2 +-
 drivers/net/ethernet/renesas/sh_eth.c         |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac1000.h   |  8 +-
 drivers/net/ethernet/xilinx/ll_temac_main.c   |  5 ++
 drivers/net/hamradio/mkiss.c                  |  1 +
 drivers/net/usb/cdc_eem.c                     |  2 +-
 drivers/net/usb/cdc_ncm.c                     |  2 +-
 drivers/net/usb/r8152.c                       |  2 +-
 drivers/net/usb/smsc75xx.c                    | 10 ++-
 drivers/nvme/target/loop.c                    |  5 +-
 drivers/pci/pci.c                             | 16 +++-
 drivers/pci/quirks.c                          | 89 +++++++++++++++++++
 drivers/pinctrl/stm32/pinctrl-stm32.c         |  9 +-
 drivers/target/target_core_transport.c        |  4 +-
 drivers/usb/core/hub.c                        |  7 ++
 drivers/usb/dwc3/core.c                       |  2 +-
 fs/gfs2/glock.c                               |  2 +-
 fs/kernfs/mount.c                             |  1 +
 fs/nilfs2/sysfs.c                             |  1 +
 fs/sysfs/mount.c                              |  6 +-
 include/linux/hid.h                           |  3 +-
 include/net/sock.h                            | 10 ++-
 include/uapi/linux/in.h                       |  3 +
 kernel/trace/trace.c                          | 11 ---
 kernel/trace/trace_clock.c                    |  6 +-
 mm/memory-failure.c                           |  7 +-
 mm/slub.c                                     |  1 +
 net/batman-adv/bat_iv_ogm.c                   |  4 +-
 net/bridge/br_private.h                       |  4 +-
 net/bridge/br_vlan_tunnel.c                   | 38 +++++---
 net/can/bcm.c                                 | 62 ++++++++++---
 net/can/raw.c                                 | 62 ++++++++++---
 net/compat.c                                  |  2 +-
 net/core/fib_rules.c                          |  2 +-
 net/core/rtnetlink.c                          |  4 +
 net/ieee802154/nl802154.c                     |  9 +-
 net/ipv4/cipso_ipv4.c                         |  1 +
 net/ipv4/icmp.c                               |  7 ++
 net/ipv4/igmp.c                               |  1 +
 net/ipv4/ipconfig.c                           | 13 +--
 net/ipv4/ping.c                               | 12 +--
 net/ipv4/route.c                              | 41 ++++++---
 net/ipv4/udp.c                                | 10 +++
 net/ipv6/udp.c                                |  3 +
 net/mac80211/ieee80211_i.h                    |  2 +-
 net/mac80211/rx.c                             |  9 +-
 net/netfilter/nf_synproxy_core.c              |  5 ++
 net/packet/af_packet.c                        | 32 +++----
 net/rds/recv.c                                |  2 +-
 net/unix/af_unix.c                            |  7 +-
 net/wireless/util.c                           |  3 +
 net/x25/af_x25.c                              |  2 +-
 85 files changed, 624 insertions(+), 226 deletions(-)

-- 
2.30.2

[PATCH 4.14 01/88] net: ieee802154: fix null deref in parse dev addr

[Sasha Levin]

From: Dan Robertson <dan@dlrobertson.com>

[ Upstream commit 9fdd04918a452980631ecc499317881c1d120b70 ]

Fix a logic error that could result in a null deref if the user sets
the mode incorrectly for the given addr type.

Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210423040214.15438-2-dan@dlrobertson.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index b1c55db73764..6d4c71a52b6b 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1315,19 +1315,20 @@ ieee802154_llsec_parse_dev_addr(struct nlattr *nla,
 				     nl802154_dev_addr_policy, NULL))
 		return -EINVAL;
 
-	if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] ||
-	    !attrs[NL802154_DEV_ADDR_ATTR_MODE] ||
-	    !(attrs[NL802154_DEV_ADDR_ATTR_SHORT] ||
-	      attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]))
+	if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] || !attrs[NL802154_DEV_ADDR_ATTR_MODE])
 		return -EINVAL;
 
 	addr->pan_id = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_PAN_ID]);
 	addr->mode = nla_get_u32(attrs[NL802154_DEV_ADDR_ATTR_MODE]);
 	switch (addr->mode) {
 	case NL802154_DEV_ADDR_SHORT:
+		if (!attrs[NL802154_DEV_ADDR_ATTR_SHORT])
+			return -EINVAL;
 		addr->short_addr = nla_get_le16(attrs[NL802154_DEV_ADDR_ATTR_SHORT]);
 		break;
 	case NL802154_DEV_ADDR_EXTENDED:
+		if (!attrs[NL802154_DEV_ADDR_ATTR_EXTENDED])
+			return -EINVAL;
 		addr->extended_addr = nla_get_le64(attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]);
 		break;
 	default:
-- 
2.30.2

[PATCH 4.14 02/88] HID: hid-sensor-hub: Return error for hid_set_field() failure

[Sasha Levin]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit edb032033da0dc850f6e7740fa1023c73195bc89 ]

In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-sensor-hub.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index aa078c1dad14..6c7e12d8e7d9 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -223,16 +223,21 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 	buffer_size = buffer_size / sizeof(__s32);
 	if (buffer_size) {
 		for (i = 0; i < buffer_size; ++i) {
-			hid_set_field(report->field[field_index], i,
-				      (__force __s32)cpu_to_le32(*buf32));
+			ret = hid_set_field(report->field[field_index], i,
+					    (__force __s32)cpu_to_le32(*buf32));
+			if (ret)
+				goto done_proc;
+
 			++buf32;
 		}
 	}
 	if (remaining_bytes) {
 		value = 0;
 		memcpy(&value, (u8 *)buf32, remaining_bytes);
-		hid_set_field(report->field[field_index], i,
-			      (__force __s32)cpu_to_le32(value));
+		ret = hid_set_field(report->field[field_index], i,
+				    (__force __s32)cpu_to_le32(value));
+		if (ret)
+			goto done_proc;
 	}
 	hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT);
 	hid_hw_wait(hsdev->hdev);
-- 
2.30.2

[PATCH 4.14 03/88] HID: Add BUS_VIRTUAL to hid_connect logging

[Sasha Levin]

From: Mark Bolhuis <mark@bolhuis.dev>

[ Upstream commit 48e33befe61a7d407753c53d1a06fc8d6b5dab80 ]

Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>

Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 71ee1267d2ef..381ab96c1e38 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1824,6 +1824,9 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 	case BUS_I2C:
 		bus = "I2C";
 		break;
+	case BUS_VIRTUAL:
+		bus = "VIRTUAL";
+		break;
 	default:
 		bus = "<UNKNOWN>";
 	}
-- 
2.30.2

[PATCH 4.14 04/88] HID: usbhid: fix info leak in hid_submit_ctrl

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ]

In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.

To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().

Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/usbhid/hid-core.c | 2 +-
 include/linux/hid.h           | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 98916fb4191a..46b8f4c353de 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -373,7 +373,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
 	raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
 	dir = usbhid->ctrl[usbhid->ctrltail].dir;
 
-	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	len = hid_report_len(report);
 	if (dir == USB_DIR_OUT) {
 		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
 		usbhid->urbctrl->transfer_buffer_length = len;
diff --git a/include/linux/hid.h b/include/linux/hid.h
index d07fe33a9045..5a2c55ed33fa 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1114,8 +1114,7 @@ static inline void hid_hw_wait(struct hid_device *hdev)
  */
 static inline u32 hid_report_len(struct hid_report *report)
 {
-	/* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */
-	return ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	return DIV_ROUND_UP(report->size, 8) + (report->id > 0);
 }
 
 int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
-- 
2.30.2

[PATCH 4.14 05/88] ARM: OMAP2+: Fix build warning when mmc_omap is not built

[Sasha Levin]

From: Yongqiang Liu <liuyongqiang13@huawei.com>

[ Upstream commit 040ab72ee10ea88e1883ad143b3e2b77596abc31 ]

GCC reports the following warning with W=1:

arch/arm/mach-omap2/board-n8x0.c:325:19: warning:
variable 'index' set but not used [-Wunused-but-set-variable]
325 |  int bit, *openp, index;
    |                   ^~~~~

Fix this by moving CONFIG_MMC_OMAP to cover the rest codes
in the n8x0_mmc_callback().

Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/board-n8x0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 20f25539d572..47abea1475d4 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -325,6 +325,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -342,7 +343,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
-- 
2.30.2

[PATCH 4.14 06/88] HID: gt683r: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit a4b494099ad657f1cb85436d333cf38870ee95bc ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-gt683r.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-gt683r.c b/drivers/hid/hid-gt683r.c
index a298fbd8db6b..8ca4c1baeda8 100644
--- a/drivers/hid/hid-gt683r.c
+++ b/drivers/hid/hid-gt683r.c
@@ -64,6 +64,7 @@ static const struct hid_device_id gt683r_led_id[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
 	{ }
 };
+MODULE_DEVICE_TABLE(hid, gt683r_led_id);
 
 static void gt683r_brightness_set(struct led_classdev *led_cdev,
 				enum led_brightness brightness)
-- 
2.30.2

[PATCH 4.14 07/88] gfs2: Fix use-after-free in gfs2_glock_shrink_scan

[Sasha Levin]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit 1ab19c5de4c537ec0d9b21020395a5b5a6c059b2 ]

The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to
remove the glock from the lru list in __gfs2_glock_put().

On the shrink scan path, the same flag is cleared under lru_lock but because
of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the
put side can be made without deleting the glock from the lru list.

Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to
ensure correct behavior on both sides - clear GLF_LRU after list_del under
lru_lock.

Reported-by: syzbot <syzbot+34ba7ddbf3021981a228@syzkaller.appspotmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 0a0dd3178483..be969f24ccf0 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1456,6 +1456,7 @@ __acquires(&lru_lock)
 	while(!list_empty(list)) {
 		gl = list_entry(list->next, struct gfs2_glock, gl_lru);
 		list_del_init(&gl->gl_lru);
+		clear_bit(GLF_LRU, &gl->gl_flags);
 		if (!spin_trylock(&gl->gl_lockref.lock)) {
 add_back_to_lru:
 			list_add(&gl->gl_lru, &lru_list);
@@ -1501,7 +1502,6 @@ static long gfs2_scan_glock_lru(int nr)
 		if (!test_bit(GLF_LOCK, &gl->gl_flags)) {
 			list_move(&gl->gl_lru, &dispose);
 			atomic_dec(&lru_count);
-			clear_bit(GLF_LRU, &gl->gl_flags);
 			freed++;
 			continue;
 		}
-- 
2.30.2

[PATCH 4.14 08/88] scsi: target: core: Fix warning on realtime kernels

[Sasha Levin]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 515da6f4295c2c42b8c54572cce3d2dd1167c41e ]

On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the
interrupts, a call to irqs_disabled() will return false thus firing a
warning in __transport_wait_for_tasks().

Remove the warning and also replace assert_spin_locked() with
lockdep_assert_held()

Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_transport.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 0d0be7d8b9d6..852680e85921 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2966,9 +2966,7 @@ __transport_wait_for_tasks(struct se_cmd *cmd, bool fabric_stop,
 	__releases(&cmd->t_state_lock)
 	__acquires(&cmd->t_state_lock)
 {
-
-	assert_spin_locked(&cmd->t_state_lock);
-	WARN_ON_ONCE(!irqs_disabled());
+	lockdep_assert_held(&cmd->t_state_lock);
 
 	if (fabric_stop)
 		cmd->transport_state |= CMD_T_FABRIC_STOP;
-- 
2.30.2

[PATCH 4.14 09/88] ethernet: myri10ge: Fix missing error code in myri10ge_probe()

[Sasha Levin]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit f336d0b93ae978f12c5e27199f828da89b91e56a ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'status'.

Eliminate the follow smatch warning:

drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
index a0a555052d8c..1ac2bc75edb1 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -3853,6 +3853,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_err(&pdev->dev,
 			"invalid sram_size %dB or board span %ldB\n",
 			mgp->sram_size, mgp->board_span);
+		status = -EINVAL;
 		goto abort_with_ioremap;
 	}
 	memcpy_fromio(mgp->eeprom_strings,
-- 
2.30.2

[PATCH 4.14 10/88] nvme-loop: reset queue count to 1 in nvme_loop_destroy_io_queues()

[Sasha Levin]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit a6c144f3d2e230f2b3ac5ed8c51e0f0391556197 ]

The queue count is increased in nvme_loop_init_io_queues(), so we
need to reset it to 1 at the end of nvme_loop_destroy_io_queues().
Otherwise the function is not re-entrant safe, and crash will happen
during concurrent reset and remove calls.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/loop.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 3388d2788fe0..5f33c3a9469b 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -322,6 +322,7 @@ static void nvme_loop_destroy_io_queues(struct nvme_loop_ctrl *ctrl)
 		clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[i].flags);
 		nvmet_sq_destroy(&ctrl->queues[i].nvme_sq);
 	}
+	ctrl->ctrl.queue_count = 1;
 }
 
 static int nvme_loop_init_io_queues(struct nvme_loop_ctrl *ctrl)
-- 
2.30.2

[PATCH 4.14 11/88] nvme-loop: clear NVME_LOOP_Q_LIVE when nvme_loop_configure_admin_queue() fails

[Sasha Levin]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 1c5f8e882a05de5c011e8c3fbeceb0d1c590eb53 ]

When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue()
fails the NVME_LOOP_Q_LIVE flag is not cleared.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/loop.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 5f33c3a9469b..963d8de932d1 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -430,6 +430,7 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl)
 	return 0;
 
 out_cleanup_queue:
+	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
 	blk_cleanup_queue(ctrl->ctrl.admin_q);
 out_free_tagset:
 	blk_mq_free_tag_set(&ctrl->admin_tag_set);
-- 
2.30.2

[PATCH 4.14 12/88] nvme-loop: check for NVME_LOOP_Q_LIVE in nvme_loop_destroy_admin_queue()

[Sasha Levin]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 4237de2f73a669e4f89ac0aa2b44fb1a1d9ec583 ]

We need to check the NVME_LOOP_Q_LIVE flag in
nvme_loop_destroy_admin_queue() to protect against duplicate
invocations eg during concurrent reset and remove calls.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/loop.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 963d8de932d1..7a0a10777cd1 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -287,7 +287,8 @@ static const struct blk_mq_ops nvme_loop_admin_mq_ops = {
 
 static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl)
 {
-	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
+	if (!test_and_clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags))
+		return;
 	nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
 	blk_cleanup_queue(ctrl->ctrl.admin_q);
 	blk_mq_free_tag_set(&ctrl->admin_tag_set);
-- 
2.30.2

[PATCH 4.14 13/88] net: ipconfig: Don't override command-line hostnames or domains

[Sasha Levin]

From: Josh Triplett <josh@joshtriplett.org>

[ Upstream commit b508d5fb69c2211a1b860fc058aafbefc3b3c3cd ]

If the user specifies a hostname or domain name as part of the ip=
command-line option, preserve it and don't overwrite it with one
supplied by DHCP/BOOTP.

For instance, ip=::::myhostname::dhcp will use "myhostname" rather than
ignoring and overwriting it.

Fix the comment on ic_bootp_string that suggests it only copies a string
"if not already set"; it doesn't have any such logic.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipconfig.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index f0782c91514c..41e384834d50 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -881,7 +881,7 @@ static void __init ic_bootp_send_if(struct ic_device *d, unsigned long jiffies_d
 
 
 /*
- *  Copy BOOTP-supplied string if not already set.
+ *  Copy BOOTP-supplied string
  */
 static int __init ic_bootp_string(char *dest, char *src, int len, int max)
 {
@@ -930,12 +930,15 @@ static void __init ic_do_bootp_ext(u8 *ext)
 		}
 		break;
 	case 12:	/* Host name */
-		ic_bootp_string(utsname()->nodename, ext+1, *ext,
-				__NEW_UTS_LEN);
-		ic_host_name_set = 1;
+		if (!ic_host_name_set) {
+			ic_bootp_string(utsname()->nodename, ext+1, *ext,
+					__NEW_UTS_LEN);
+			ic_host_name_set = 1;
+		}
 		break;
 	case 15:	/* Domain name (DNS) */
-		ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain));
+		if (!ic_domain[0])
+			ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain));
 		break;
 	case 17:	/* Root path */
 		if (!root_server_path[0])
-- 
2.30.2

[PATCH 4.14 14/88] rtnetlink: Fix missing error code in rtnl_bridge_notify()

[Sasha Levin]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit a8db57c1d285c758adc7fb43d6e2bad2554106e1 ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

net/core/rtnetlink.c:4834 rtnl_bridge_notify() warn: missing error code
'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 0168c700a201..fa3ed51f846b 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3648,8 +3648,10 @@ static int rtnl_bridge_notify(struct net_device *dev)
 	if (err < 0)
 		goto errout;
 
-	if (!skb->len)
+	if (!skb->len) {
+		err = -EINVAL;
 		goto errout;
+	}
 
 	rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
 	return 0;
-- 
2.30.2

[PATCH 4.14 15/88] net/x25: Return the correct errno code

[Sasha Levin]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit d7736958668c4facc15f421e622ffd718f5be80a ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/x25/af_x25.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 987e5f8cafbe..fd0a6c6c77b6 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -550,7 +550,7 @@ static int x25_create(struct net *net, struct socket *sock, int protocol,
 	if (protocol)
 		goto out;
 
-	rc = -ENOBUFS;
+	rc = -ENOMEM;
 	if ((sk = x25_alloc_socket(net, kern)) == NULL)
 		goto out;
 
-- 
2.30.2

[PATCH 4.14 16/88] net: Return the correct errno code

[Sasha Levin]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit 49251cd00228a3c983651f6bb2f33f6a0b8f152e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/compat.c b/net/compat.c
index 45349658ed01..2ec822f4e409 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -158,7 +158,7 @@ int cmsghdr_from_user_compat_to_kern(struct msghdr *kmsg, struct sock *sk,
 	if (kcmlen > stackbuf_size)
 		kcmsg_base = kcmsg = sock_kmalloc(sk, kcmlen, GFP_KERNEL);
 	if (kcmsg == NULL)
-		return -ENOBUFS;
+		return -ENOMEM;
 
 	/* Now copy them over neatly. */
 	memset(kcmsg, 0, kcmlen);
-- 
2.30.2

[PATCH 4.14 17/88] fib: Return the correct errno code

[Sasha Levin]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit 59607863c54e9eb3f69afc5257dfe71c38bb751e ]

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/fib_rules.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 9bb321df0869..76c3f602ee15 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -928,7 +928,7 @@ static void notify_rule_change(int event, struct fib_rule *rule,
 {
 	struct net *net;
 	struct sk_buff *skb;
-	int err = -ENOBUFS;
+	int err = -ENOMEM;
 
 	net = ops->fro_net;
 	skb = nlmsg_new(fib_rule_nlmsg_size(ops, rule), GFP_KERNEL);
-- 
2.30.2

[PATCH 4.14 18/88] dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 253697b93c2a1c237d34d3ae326e394aeb0ca7b3 ]

When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.

Repairs this build error:
s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map':
altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap'

Fixes: a85c6f1b2921 ("dmaengine: Add driver for Altera / Intel mSGDMA IP core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Reviewed-by: Stefan Roese <sr@denx.de>
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
Link: https://lore.kernel.org/r/20210522021313.16405-2-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 79b809dbfda0..ff69feefc1c6 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -58,6 +58,7 @@ config DMA_OF
 #devices
 config ALTERA_MSGDMA
 	tristate "Altera / Intel mSGDMA Engine"
+	depends on HAS_IOMEM
 	select DMA_ENGINE
 	help
 	  Enable support for Altera / Intel mSGDMA controller.
-- 
2.30.2

[PATCH 4.14 19/88] dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 0cfbb589d67f16fa55b26ae02b69c31b52e344b1 ]

When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.

Rectifies these build errors:
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe':
hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource'
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init':
hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource'
s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource'

Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20210522021313.16405-3-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/qcom/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index a7761c4025f4..a97c7123d913 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -9,6 +9,7 @@ config QCOM_BAM_DMA
 
 config QCOM_HIDMA_MGMT
 	tristate "Qualcomm Technologies HIDMA Management support"
+	depends on HAS_IOMEM
 	select DMA_ENGINE
 	help
 	  Enable support for the Qualcomm Technologies HIDMA Management.
-- 
2.30.2

[PATCH 4.14 20/88] dmaengine: stedma40: add missing iounmap() on error in d40_probe()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit fffdaba402cea79b8d219355487d342ec23f91c6 ]

Add the missing iounmap() before return from d40_probe()
in the error handling case.

Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210518141108.1324127-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ste_dma40.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 90feb6a05e59..ee15d4fefbad 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -3656,6 +3656,9 @@ static int __init d40_probe(struct platform_device *pdev)
 
 	kfree(base->lcla_pool.base_unaligned);
 
+	if (base->lcpa_base)
+		iounmap(base->lcpa_base);
+
 	if (base->phy_lcpa)
 		release_mem_region(base->phy_lcpa,
 				   base->lcpa_size);
-- 
2.30.2

[PATCH 4.14 21/88] mm/memory-failure: make sure wait for page writeback in memory_failure

[Sasha Levin]

From: yangerkun <yangerkun@huawei.com>

[ Upstream commit e8675d291ac007e1c636870db880f837a9ea112a ]

Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in
clear_inode:

  kernel BUG at fs/inode.c:519!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7)
  CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95
  Hardware name: linux,dummy-virt (DT)
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : clear_inode+0x280/0x2a8
  lr : clear_inode+0x280/0x2a8
  Call trace:
    clear_inode+0x280/0x2a8
    ext4_clear_inode+0x38/0xe8
    ext4_free_inode+0x130/0xc68
    ext4_evict_inode+0xb20/0xcb8
    evict+0x1a8/0x3c0
    iput+0x344/0x460
    do_unlinkat+0x260/0x410
    __arm64_sys_unlinkat+0x6c/0xc0
    el0_svc_common+0xdc/0x3b0
    el0_svc_handler+0xf8/0x160
    el0_svc+0x10/0x218
  Kernel panic - not syncing: Fatal exception

A crash dump of this problem show that someone called __munlock_pagevec
to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap
-> munlock_vma_pages_range -> __munlock_pagevec.

As a result memory_failure will call identify_page_state without
wait_on_page_writeback.  And after truncate_error_page clear the mapping
of this page.  end_page_writeback won't call sb_clear_inode_writeback to
clear inode->i_wb_list.  That will trigger BUG_ON in clear_inode!

Fix it by checking PageWriteback too to help determine should we skip
wait_on_page_writeback.

Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com
Fixes: 0bc1f8b0682c ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory-failure.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 001b6bfccbfb..e7827b9e6397 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1267,7 +1267,12 @@ int memory_failure(unsigned long pfn, int trapno, int flags)
 		return 0;
 	}
 
-	if (!PageTransTail(p) && !PageLRU(p))
+	/*
+	 * __munlock_pagevec may clear a writeback page's LRU flag without
+	 * page_lock. We need wait writeback completion for this page or it
+	 * may trigger vfs BUG while evict inode.
+	 */
+	if (!PageTransTail(p) && !PageLRU(p) && !PageWriteback(p))
 		goto identify_page_state;
 
 	/*
-- 
2.30.2

[PATCH 4.14 22/88] batman-adv: Avoid WARN_ON timing related checks

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9f460ae31c4435fd022c443a6029352217a16ac1 ]

The soft/batadv interface for a queued OGM can be changed during the time
the OGM was queued for transmission and when the OGM is actually
transmitted by the worker.

But WARN_ON must be used to denote kernel bugs and not to print simple
warnings. A warning can simply be printed using pr_warn.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+c0b807de416427ff3dd1@syzkaller.appspotmail.com
Fixes: ef0a937f7a14 ("batman-adv: consider outgoing interface in OGM sending")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_iv_ogm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 7a723e124dbb..3ec16c48e768 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -585,8 +585,10 @@ static void batadv_iv_ogm_emit(struct batadv_forw_packet *forw_packet)
 	if (WARN_ON(!forw_packet->if_outgoing))
 		return;
 
-	if (WARN_ON(forw_packet->if_outgoing->soft_iface != soft_iface))
+	if (forw_packet->if_outgoing->soft_iface != soft_iface) {
+		pr_warn("%s: soft interface switch for queued OGM\n", __func__);
 		return;
+	}
 
 	if (forw_packet->if_incoming->if_status != BATADV_IF_ACTIVE)
 		return;
-- 
2.30.2

[PATCH 4.14 23/88] net: ipv4: fix memory leak in netlbl_cipsov4_add_std

[Sasha Levin]

From: Nanyong Sun <sunnanyong@huawei.com>

[ Upstream commit d612c3f3fae221e7ea736d196581c2217304bbbc ]

Reported by syzkaller:
BUG: memory leak
unreferenced object 0xffff888105df7000 (size 64):
comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline]
[<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416
[<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739
[<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
[<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800
[<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
[<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae

The memory of doi_def->map.std pointing is allocated in
netlbl_cipsov4_add_std, but no place has freed it. It should be
freed in cipso_v4_doi_free which frees the cipso DOI resource.

Fixes: 96cb8e3313c7a ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/cipso_ipv4.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 6a1b52b34e20..e8b8dd1cb157 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -486,6 +486,7 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)
 		kfree(doi_def->map.std->lvl.local);
 		kfree(doi_def->map.std->cat.cipso);
 		kfree(doi_def->map.std->cat.local);
+		kfree(doi_def->map.std);
 		break;
 	}
 	kfree(doi_def);
-- 
2.30.2

[PATCH 4.14 24/88] net: rds: fix memory leak in rds_recvmsg

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 49bfcbfd989a8f1f23e705759a6bb099de2cff9f ]

Syzbot reported memory leak in rds. The problem
was in unputted refcount in case of error.

int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
		int msg_flags)
{
...

	if (!rds_next_incoming(rs, &inc)) {
		...
	}

After this "if" inc refcount incremented and

	if (rds_cmsg_recv(inc, msg, rs)) {
		ret = -EFAULT;
		goto out;
	}
...
out:
	return ret;
}

in case of rds_cmsg_recv() fail the refcount won't be
decremented. And it's easy to see from ftrace log, that
rds_inc_addref() don't have rds_inc_put() pair in
rds_recvmsg() after rds_cmsg_recv()

 1)               |  rds_recvmsg() {
 1)   3.721 us    |    rds_inc_addref();
 1)   3.853 us    |    rds_message_inc_copy_to_user();
 1) + 10.395 us   |    rds_cmsg_recv();
 1) + 34.260 us   |  }

Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/recv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rds/recv.c b/net/rds/recv.c
index ef022d24f87a..a1b2bdab6655 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -663,7 +663,7 @@ int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 
 		if (rds_cmsg_recv(inc, msg, rs)) {
 			ret = -EFAULT;
-			goto out;
+			break;
 		}
 
 		rds_stats_inc(s_recv_delivered);
-- 
2.30.2

[PATCH 4.14 25/88] udp: fix race between close() and udp_abort()

[Sasha Levin]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit a8b897c7bcd47f4147d066e22cc01d1026d7640e ]

Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.

We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.

Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>
Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 10 ++++++++++
 net/ipv6/udp.c |  3 +++
 2 files changed, 13 insertions(+)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 8f298f27f6ec..cf5c4d2f68c1 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2337,6 +2337,9 @@ void udp_destroy_sock(struct sock *sk)
 {
 	struct udp_sock *up = udp_sk(sk);
 	bool slow = lock_sock_fast(sk);
+
+	/* protects from races with udp_abort() */
+	sock_set_flag(sk, SOCK_DEAD);
 	udp_flush_pending_frames(sk);
 	unlock_sock_fast(sk, slow);
 	if (static_key_false(&udp_encap_needed) && up->encap_type) {
@@ -2570,10 +2573,17 @@ int udp_abort(struct sock *sk, int err)
 {
 	lock_sock(sk);
 
+	/* udp{v6}_destroy_sock() sets it under the sk lock, avoid racing
+	 * with close()
+	 */
+	if (sock_flag(sk, SOCK_DEAD))
+		goto out;
+
 	sk->sk_err = err;
 	sk->sk_error_report(sk);
 	__udp_disconnect(sk, 0);
 
+out:
 	release_sock(sk);
 
 	return 0;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 38ad3fac8c37..d9d25b9c07ae 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1434,6 +1434,9 @@ void udpv6_destroy_sock(struct sock *sk)
 {
 	struct udp_sock *up = udp_sk(sk);
 	lock_sock(sk);
+
+	/* protects from races with udp_abort() */
+	sock_set_flag(sk, SOCK_DEAD);
 	udp_v6_flush_pending_frames(sk);
 	release_sock(sk);
 
-- 
2.30.2

[PATCH 4.14 26/88] rtnetlink: Fix regression in bridge VLAN configuration

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit d2e381c4963663bca6f30c3b996fa4dbafe8fcb5 ]

Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:

 # ip link add name br1 type bridge vlan_filtering 1
 # bridge vlan add dev br1 vid 555 self pvid untagged
 RTNETLINK answers: Invalid argument

As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49b5 ("bridge: dont send
notification when skb->len == 0 in rtnl_bridge_notify").

Fix by removing the error and add a comment to avoid future bugs.

Fixes: a8db57c1d285 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index fa3ed51f846b..3bcaecc7ba69 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3648,10 +3648,12 @@ static int rtnl_bridge_notify(struct net_device *dev)
 	if (err < 0)
 		goto errout;
 
-	if (!skb->len) {
-		err = -EINVAL;
+	/* Notification info is only filled for bridge ports, not the bridge
+	 * device itself. Therefore, a zero notification length is valid and
+	 * should not result in an error.
+	 */
+	if (!skb->len)
 		goto errout;
-	}
 
 	rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
 	return 0;
-- 
2.30.2

[PATCH 4.14 27/88] netfilter: synproxy: Fix out of bounds when parsing TCP options

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit 5fc177ab759418c9537433e63301096e733fb915 ]

The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.

This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_synproxy_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c
index 49bd8bb16b18..9ff26eb0309a 100644
--- a/net/netfilter/nf_synproxy_core.c
+++ b/net/netfilter/nf_synproxy_core.c
@@ -34,6 +34,9 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff,
 	int length = (th->doff * 4) - sizeof(*th);
 	u8 buf[40], *ptr;
 
+	if (unlikely(length < 0))
+		return false;
+
 	ptr = skb_header_pointer(skb, doff + sizeof(*th), length, buf);
 	if (ptr == NULL)
 		return false;
@@ -50,6 +53,8 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff,
 			length--;
 			continue;
 		default:
+			if (length < 2)
+				return true;
 			opsize = *ptr++;
 			if (opsize < 2)
 				return true;
-- 
2.30.2

[PATCH 4.14 28/88] alx: Fix an error handling path in 'alx_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 33e381448cf7a05d76ac0b47d4a6531ecd0e5c53 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: ab69bde6b2e9 ("alx: add a simple AR816x/AR817x device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/alx/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index ce2e64410823..bb0e217460c9 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1857,6 +1857,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	free_netdev(netdev);
 out_pci_release:
 	pci_release_mem_regions(pdev);
+	pci_disable_pcie_error_reporting(pdev);
 out_pci_disable:
 	pci_disable_device(pdev);
 	return err;
-- 
2.30.2

[PATCH 4.14 29/88] net: stmmac: dwmac1000: Fix extended MAC address registers definition

[Sasha Levin]

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit 1adb20f0d496b2c61e9aa1f4761b8d71f93d258e ]

The register starts from 0x800 is the 16th MAC address register rather
than the first one.

Fixes: cffb13f4d6fb ("stmmac: extend mac addr reg and fix perfect filering")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index c02d36629c52..6f7ed3aaff1b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -87,10 +87,10 @@ enum power_event {
 #define LPI_CTRL_STATUS_TLPIEN	0x00000001	/* Transmit LPI Entry */
 
 /* GMAC HW ADDR regs */
-#define GMAC_ADDR_HIGH(reg)	(((reg > 15) ? 0x00000800 : 0x00000040) + \
-				(reg * 8))
-#define GMAC_ADDR_LOW(reg)	(((reg > 15) ? 0x00000804 : 0x00000044) + \
-				(reg * 8))
+#define GMAC_ADDR_HIGH(reg)	((reg > 15) ? 0x00000800 + (reg - 16) * 8 : \
+				 0x00000040 + (reg * 8))
+#define GMAC_ADDR_LOW(reg)	((reg > 15) ? 0x00000804 + (reg - 16) * 8 : \
+				 0x00000044 + (reg * 8))
 #define GMAC_MAX_PERFECT_ADDRESSES	1
 
 #define GMAC_PCS_BASE		0x000000c0	/* PCS register base */
-- 
2.30.2

[PATCH 4.14 30/88] qlcnic: Fix an error handling path in 'qlcnic_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit cb3376604a676e0302258b01893911bdd7aa5278 ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: 451724c821c1 ("qlcnic: aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 6684a4cb8b88..45361310eea0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2711,6 +2711,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	kfree(ahw);
 
 err_out_free_res:
+	pci_disable_pcie_error_reporting(pdev);
 	pci_release_regions(pdev);
 
 err_out_disable_pdev:
-- 
2.30.2

[PATCH 4.14 31/88] netxen_nic: Fix an error handling path in 'netxen_nic_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 49a10c7b176295f8fafb338911cf028e97f65f4d ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: e87ad5539343 ("netxen: support pci error handlers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 8f8a1894378e..5b91c8f823ff 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1624,6 +1624,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	free_netdev(netdev);
 
 err_out_free_res:
+	if (NX_IS_REVISION_P3(pdev->revision))
+		pci_disable_pcie_error_reporting(pdev);
 	pci_release_regions(pdev);
 
 err_out_disable_pdev:
-- 
2.30.2

[PATCH 4.14 32/88] net: cdc_ncm: switch to eth%d interface naming

[Sasha Levin]

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit c1a3d4067309451e68c33dbd356032549cc0bd8e ]

This is meant to make the host side cdc_ncm interface consistently
named just like the older CDC protocols: cdc_ether & cdc_ecm
(and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'.

include/linux/usb/usbnet.h:
  #define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
  #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
  #define FLAG_WWAN	0x0400		/* use "wwan%d" names */
  #define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */

drivers/net/usb/usbnet.c @ line 1711:
  strcpy (net->name, "usb%d");
  ...
  // heuristic:  "usb%d" for links we know are two-host,
  // else "eth%d" when there's reasonable doubt.  userspace
  // can rename the link if it knows better.
  if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
      ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
       (net->dev_addr [0] & 0x02) == 0))
          strcpy (net->name, "eth%d");
  /* WLAN devices should always be named "wlan%d" */
  if ((dev->driver_info->flags & FLAG_WLAN) != 0)
          strcpy(net->name, "wlan%d");
  /* WWAN devices should always be named "wwan%d" */
  if ((dev->driver_info->flags & FLAG_WWAN) != 0)
          strcpy(net->name, "wwan%d");

So by using ETHER | POINTTOPOINT the interface naming is
either usb%d or eth%d based on the global uniqueness of the
mac address of the device.

Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm
driver end up being called usb%d instead of eth%d even though they're
definitely not two-host.  (All 1gbps & 5gbps ethernet usb dongles I've
tested don't hit this problem due to use of different drivers, primarily
r8152 and aqc111)

Fixes tag is based purely on git blame, and is really just here to make
sure this hits LTS branches newer than v4.5.

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_ncm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 468db50eb5e7..5b5156508f7c 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1667,7 +1667,7 @@ static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
 static const struct driver_info cdc_ncm_info = {
 	.description = "CDC NCM",
 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
-			| FLAG_LINK_INTR,
+			| FLAG_LINK_INTR | FLAG_ETHER,
 	.bind = cdc_ncm_bind,
 	.unbind = cdc_ncm_unbind,
 	.manage_power = usbnet_manage_power,
-- 
2.30.2

[PATCH 4.14 33/88] net: usb: fix possible use-after-free in smsc75xx_bind

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 56b786d86694e079d8aad9b314e015cd4ac02a3d ]

The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
fails to clean up the work scheduled in smsc75xx_reset->
smsc75xx_set_multicast, which leads to use-after-free if the work is
scheduled to start after the deallocation. In addition, this patch
also removes a dangling pointer - dev->data[0].

This patch calls cancel_work_sync to cancel the scheduled work and set
the dangling pointer to NULL.

Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc75xx.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 62f2862c9775..8b9fd4e071f3 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1495,7 +1495,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
 	ret = smsc75xx_wait_ready(dev, 0);
 	if (ret < 0) {
 		netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
-		goto err;
+		goto free_pdata;
 	}
 
 	smsc75xx_init_mac_address(dev);
@@ -1504,7 +1504,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
 	ret = smsc75xx_reset(dev);
 	if (ret < 0) {
 		netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
-		goto err;
+		goto cancel_work;
 	}
 
 	dev->net->netdev_ops = &smsc75xx_netdev_ops;
@@ -1515,8 +1515,11 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
 	return 0;
 
-err:
+cancel_work:
+	cancel_work_sync(&pdata->set_multicast);
+free_pdata:
 	kfree(pdata);
+	dev->data[0] = 0;
 	return ret;
 }
 
@@ -1527,7 +1530,6 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 		cancel_work_sync(&pdata->set_multicast);
 		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
 		kfree(pdata);
-		pdata = NULL;
 		dev->data[0] = 0;
 	}
 }
-- 
2.30.2

[PATCH 4.14 34/88] net: ipv4: fix memory leak in ip_mc_add1_src

[Sasha Levin]

From: Chengyang Fan <cy.fan@huawei.com>

[ Upstream commit d8e2973029b8b2ce477b564824431f3385c77083 ]

BUG: memory leak
unreferenced object 0xffff888101bc4c00 (size 32):
  comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................
  backtrace:
    [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline]
    [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline]
    [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline]
    [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095
    [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416
    [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline]
    [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423
    [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857
    [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117
    [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline]
    [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline]
    [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125
    [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47
    [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set
link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed,
because it was also called in igmpv3_clear_delrec().

Rough callgraph:

inetdev_destroy
-> ip_mc_destroy_dev
     -> igmpv3_clear_delrec
        -> ip_mc_clear_src
-> RCU_INIT_POINTER(dev->ip_ptr, NULL)

However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't
release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the
NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through
inetdev_by_index() and then in_dev->mc_list->sources cannot be released
by ip_mc_del1_src() in the sock_close. Rough call sequence goes like:

sock_close
-> __sock_release
   -> inet_release
      -> ip_mc_drop_socket
         -> inetdev_by_index
         -> ip_mc_leave_src
            -> ip_mc_del_src
               -> ip_mc_del1_src

So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free
in_dev->mc_list->sources.

Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/igmp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index b6f0ee01f2e0..a6b048ff30e6 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1790,6 +1790,7 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 	while ((i = rtnl_dereference(in_dev->mc_list)) != NULL) {
 		in_dev->mc_list = i->next_rcu;
 		in_dev->mc_count--;
+		ip_mc_clear_src(i);
 		ip_ma_put(i);
 	}
 }
-- 
2.30.2

[PATCH 4.14 35/88] net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a494bd642d9120648b06bb7d28ce6d05f55a7819 ]

While unix_may_send(sk, osk) is called while osk is locked, it appears
unix_release_sock() can overwrite unix_peer() after this lock has been
released, making KCSAN unhappy.

Changing unix_release_sock() to access/change unix_peer()
before lock is released should fix this issue.

BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock

write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1:
 unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558
 unix_release+0x2f/0x50 net/unix/af_unix.c:859
 __sock_release net/socket.c:599 [inline]
 sock_close+0x6c/0x150 net/socket.c:1258
 __fput+0x25b/0x4e0 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0xae/0x130 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302
 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0:
 unix_may_send net/unix/af_unix.c:189 [inline]
 unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffff888167905400 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 44ff3f5c22df..8e7054fc27f8 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -535,12 +535,14 @@ static void unix_release_sock(struct sock *sk, int embrion)
 	u->path.mnt = NULL;
 	state = sk->sk_state;
 	sk->sk_state = TCP_CLOSE;
+
+	skpair = unix_peer(sk);
+	unix_peer(sk) = NULL;
+
 	unix_state_unlock(sk);
 
 	wake_up_interruptible_all(&u->peer_wait);
 
-	skpair = unix_peer(sk);
-
 	if (skpair != NULL) {
 		if (sk->sk_type == SOCK_STREAM || sk->sk_type == SOCK_SEQPACKET) {
 			unix_state_lock(skpair);
@@ -555,7 +557,6 @@ static void unix_release_sock(struct sock *sk, int embrion)
 
 		unix_dgram_peer_wake_disconnect(sk, skpair);
 		sock_put(skpair); /* It may now die */
-		unix_peer(sk) = NULL;
 	}
 
 	/* Try to flush out this socket. Throw out buffers at least */
-- 
2.30.2

[PATCH 4.14 36/88] be2net: Fix an error handling path in 'be_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c19c8c0e666f9259e2fc4d2fa4b9ff8e3b40ee5d ]

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: d6b6d9877878 ("be2net: use PCIe AER capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index cabeb1790db7..43ae124cabff 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -5926,6 +5926,7 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 unmap_bars:
 	be_unmap_pci_bars(adapter);
 free_netdev:
+	pci_disable_pcie_error_reporting(pdev);
 	free_netdev(netdev);
 rel_reg:
 	pci_release_regions(pdev);
-- 
2.30.2

[PATCH 4.14 37/88] net: hamradio: fix memory leak in mkiss_close

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 7edcc682301492380fbdd604b4516af5ae667a13 ]

My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().

In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.

Fail log:

BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00  ax0.............
    00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00  .'.*............
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff  ...(.......(....
    98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00  .....@..........
  backtrace:
    [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310
    [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0
    [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0
    [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff  ...(............
    80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
    [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80
    [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
    [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
    [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
    [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
    [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
    [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
    [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/mkiss.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 9fd7dab42a53..2074fc55a88a 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -810,6 +810,7 @@ static void mkiss_close(struct tty_struct *tty)
 	ax->tty = NULL;
 
 	unregister_netdev(ax->dev);
+	free_netdev(ax->dev);
 }
 
 /* Perform I/O control on an active ax25 channel. */
-- 
2.30.2

[PATCH 4.14 38/88] net: cdc_eem: fix tx fixup skb leak

[Sasha Levin]

From: Linyu Yuan <linyyuan@codeaurora.org>

[ Upstream commit c3b26fdf1b32f91c7a3bc743384b4a298ab53ad7 ]

when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.

fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.

Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_eem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index f7180f8db39e..9c15e1a1261b 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -138,10 +138,10 @@ static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	}
 
 	skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+	dev_kfree_skb_any(skb);
 	if (!skb2)
 		return NULL;
 
-	dev_kfree_skb_any(skb);
 	skb = skb2;
 
 done:
-- 
2.30.2

[PATCH 4.14 39/88] icmp: don't send out ICMP messages with a source address of 0.0.0.0

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ]

When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.

Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.

Below is a quick example reproducing this issue with network namespaces:

ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel

With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/in.h | 3 +++
 net/ipv4/icmp.c         | 7 +++++++
 2 files changed, 10 insertions(+)

diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 48e8a225b985..2a66ab49f14d 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -280,6 +280,9 @@ struct sockaddr_in {
 /* Address indicating an error return. */
 #define	INADDR_NONE		((unsigned long int) 0xffffffff)
 
+/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */
+#define	INADDR_DUMMY		((unsigned long int) 0xc0000008)
+
 /* Network number for local host loopback. */
 #define	IN_LOOPBACKNET		127
 
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 96ee1fbd999e..ba07f128d7ad 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -743,6 +743,13 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
 		icmp_param.data_len = room;
 	icmp_param.head_len = sizeof(struct icmphdr);
 
+	/* if we don't have a source address at this point, fall back to the
+	 * dummy address instead of sending out a packet with a source address
+	 * of 0.0.0.0
+	 */
+	if (!fl4.saddr)
+		fl4.saddr = htonl(INADDR_DUMMY);
+
 	icmp_push_reply(&icmp_param, &fl4, &ipc, &rt);
 ende:
 	ip_rt_put(rt);
-- 
2.30.2

[PATCH 4.14 40/88] net: ethernet: fix potential use-after-free in ec_bhf_remove

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 9cca0c2d70149160407bda9a9446ce0c29b6e6c6 ]

static void ec_bhf_remove(struct pci_dev *dev)
{
...
	struct ec_bhf_priv *priv = netdev_priv(net_dev);

	unregister_netdev(net_dev);
	free_netdev(net_dev);

	pci_iounmap(dev, priv->dma_io);
	pci_iounmap(dev, priv->io);
...
}

priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.

Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ec_bhf.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ec_bhf.c b/drivers/net/ethernet/ec_bhf.c
index 1b79a6defd56..5561dd295324 100644
--- a/drivers/net/ethernet/ec_bhf.c
+++ b/drivers/net/ethernet/ec_bhf.c
@@ -585,10 +585,12 @@ static void ec_bhf_remove(struct pci_dev *dev)
 	struct ec_bhf_priv *priv = netdev_priv(net_dev);
 
 	unregister_netdev(net_dev);
-	free_netdev(net_dev);
 
 	pci_iounmap(dev, priv->dma_io);
 	pci_iounmap(dev, priv->io);
+
+	free_netdev(net_dev);
+
 	pci_release_regions(dev);
 	pci_clear_master(dev);
 	pci_disable_device(dev);
-- 
2.30.2

[PATCH 4.14 41/88] radeon: use memcpy_to/fromio for UVD fw upload

[Sasha Levin]

From: Chen Li <chenli@uniontech.com>

[ Upstream commit ab8363d3875a83f4901eb1cc00ce8afd24de6c85 ]

I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.

As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.

BTW, amdgpu has already done it in:
commit ba0b2275a678 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.

Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_uvd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 95f4db70dd22..fde9c69ecc86 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -286,7 +286,7 @@ int radeon_uvd_resume(struct radeon_device *rdev)
 	if (rdev->uvd.vcpu_bo == NULL)
 		return -EINVAL;
 
-	memcpy(rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
+	memcpy_toio((void __iomem *)rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
 
 	size = radeon_bo_size(rdev->uvd.vcpu_bo);
 	size -= rdev->uvd_fw->size;
@@ -294,7 +294,7 @@ int radeon_uvd_resume(struct radeon_device *rdev)
 	ptr = rdev->uvd.cpu_addr;
 	ptr += rdev->uvd_fw->size;
 
-	memset(ptr, 0, size);
+	memset_io((void __iomem *)ptr, 0, size);
 
 	return 0;
 }
-- 
2.30.2

[PATCH 4.14 42/88] hwmon: (scpi-hwmon) shows the negative temperature properly

[Sasha Levin]

From: Riwen Lu <luriwen@kylinos.cn>

[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ]

The scpi hwmon shows the sub-zero temperature in an unsigned integer,
which would confuse the users when the machine works in low temperature
environment. This shows the sub-zero temperature in an signed value and
users can get it properly from sensors.

Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Tested-by: Xin Chen <chenxin@kylinos.cn>
Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/scpi-hwmon.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 7e49da50bc69..562f3e287297 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -107,6 +107,15 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
 
 	scpi_scale_reading(&value, sensor);
 
+	/*
+	 * Temperature sensor values are treated as signed values based on
+	 * observation even though that is not explicitly specified, and
+	 * because an unsigned u64 temperature does not really make practical
+	 * sense especially when the temperature is below zero degrees Celsius.
+	 */
+	if (sensor->info.class == TEMPERATURE)
+		return sprintf(buf, "%lld\n", (s64)value);
+
 	return sprintf(buf, "%llu\n", value);
 }
 
-- 
2.30.2

[PATCH 4.14 43/88] can: bcm: fix infoleak in struct bcm_msg_head

[Sasha Levin]

From: Norbert Slusarek <nslusarek@gmx.net>

commit 5e87ddbe3942e27e939bdc02deb8579b0cbd8ecc upstream.

On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between
struct members count and ival1. Even though all struct members are initialized,
the 4-byte hole will contain data from the kernel stack. This patch zeroes out
struct bcm_msg_head before usage, preventing infoleaks to userspace.

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/bcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 12d851c4604d..f691afcc5b8b 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -406,6 +406,7 @@ static void bcm_tx_timeout_tsklet(unsigned long data)
 		if (!op->count && (op->flags & TX_COUNTEVT)) {
 
 			/* create notification to user */
+			memset(&msg_head, 0, sizeof(msg_head));
 			msg_head.opcode  = TX_EXPIRED;
 			msg_head.flags   = op->flags;
 			msg_head.count   = op->count;
@@ -453,6 +454,7 @@ static void bcm_rx_changed(struct bcm_op *op, struct canfd_frame *data)
 	/* this element is not throttled anymore */
 	data->flags &= (BCM_CAN_FLAGS_MASK|RX_RECV);
 
+	memset(&head, 0, sizeof(head));
 	head.opcode  = RX_CHANGED;
 	head.flags   = op->flags;
 	head.count   = op->count;
@@ -567,6 +569,7 @@ static void bcm_rx_timeout_tsklet(unsigned long data)
 	struct bcm_msg_head msg_head;
 
 	/* create notification to user */
+	memset(&msg_head, 0, sizeof(msg_head));
 	msg_head.opcode  = RX_TIMEOUT;
 	msg_head.flags   = op->flags;
 	msg_head.count   = op->count;
-- 
2.30.2

[PATCH 4.14 44/88] can: mcba_usb: fix memory leak in mcba_usb

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 91c02557174be7f72e46ed7311e3bea1939840b0 upstream.

Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.

In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see mcba_usb_start) and this flag cannot be used with
   coherent buffers.

Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem)

So, all allocated buffers should be freed with usb_free_coherent()
explicitly

NOTE:
The same pattern for allocating and freeing coherent buffers
is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/mcba_usb.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index a09e3f6c2c50..6b0c6009dde0 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -93,6 +93,8 @@ struct mcba_priv {
 	bool can_ka_first_pass;
 	bool can_speed_check;
 	atomic_t free_ctx_cnt;
+	void *rxbuf[MCBA_MAX_RX_URBS];
+	dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
 };
 
 /* CAN frame */
@@ -644,6 +646,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
 	for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
 		struct urb *urb = NULL;
 		u8 *buf;
+		dma_addr_t buf_dma;
 
 		/* create a URB, and a buffer for it */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -653,7 +656,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
 		}
 
 		buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
-					 GFP_KERNEL, &urb->transfer_dma);
+					 GFP_KERNEL, &buf_dma);
 		if (!buf) {
 			netdev_err(netdev, "No memory left for USB buffer\n");
 			usb_free_urb(urb);
@@ -672,11 +675,14 @@ static int mcba_usb_start(struct mcba_priv *priv)
 		if (err) {
 			usb_unanchor_urb(urb);
 			usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
-					  buf, urb->transfer_dma);
+					  buf, buf_dma);
 			usb_free_urb(urb);
 			break;
 		}
 
+		priv->rxbuf[i] = buf;
+		priv->rxbuf_dma[i] = buf_dma;
+
 		/* Drop reference, USB core will take care of freeing it */
 		usb_free_urb(urb);
 	}
@@ -719,7 +725,14 @@ static int mcba_usb_open(struct net_device *netdev)
 
 static void mcba_urb_unlink(struct mcba_priv *priv)
 {
+	int i;
+
 	usb_kill_anchored_urbs(&priv->rx_submitted);
+
+	for (i = 0; i < MCBA_MAX_RX_URBS; ++i)
+		usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
+				  priv->rxbuf[i], priv->rxbuf_dma[i]);
+
 	usb_kill_anchored_urbs(&priv->tx_submitted);
 }
 
-- 
2.30.2

[PATCH 4.14 45/88] usb: core: hub: Disable autosuspend for Cypress CY7C65632

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

commit a7d8d1c7a7f73e780aa9ae74926ae5985b2f895f upstream.

The Cypress CY7C65632 appears to have an issue with auto suspend and
detecting devices, not too dissimilar to the SMSC 5534B hub. It is
easiest to reproduce by connecting multiple mass storage devices to
the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts
result in the devices not being detected. It is however possible to
make them appear using lsusb -v.

Disabling autosuspend for this hub resolves the issue.

Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 40743e9e9d93..276a63ae510e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -38,6 +38,8 @@
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define USB_VENDOR_SMSC				0x0424
 #define USB_PRODUCT_USB5534B			0x5534
+#define USB_VENDOR_CYPRESS			0x04b4
+#define USB_PRODUCT_CY7C65632			0x6570
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
@@ -5325,6 +5327,11 @@ static const struct usb_device_id hub_id_table[] = {
       .idProduct = USB_PRODUCT_USB5534B,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_CYPRESS,
+      .idProduct = USB_PRODUCT_CY7C65632,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
 			| USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_GENESYS_LOGIC,
-- 
2.30.2

[PATCH 4.14 46/88] tracing: Do not stop recording cmdlines when tracing is off

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

commit 85550c83da421fb12dc1816c45012e1e638d2b38 upstream.

The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.

If the name is not mapped, the output looks like this:

    <...>-1316          [005] ...2   132.044039: ...

Instead of this:

    gnome-shell-1316    [005] ...2   132.044039: ...

The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.

The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.

Remove the check, as it hides the names of tasks for events in the
instance buffers.

Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 42531ee852ff..badc7c13da46 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2024,8 +2024,6 @@ static bool tracing_record_taskinfo_skip(int flags)
 {
 	if (unlikely(!(flags & (TRACE_RECORD_CMDLINE | TRACE_RECORD_TGID))))
 		return true;
-	if (atomic_read(&trace_record_taskinfo_disabled) || !tracing_is_on())
-		return true;
 	if (!__this_cpu_read(trace_taskinfo_save))
 		return true;
 	return false;
-- 
2.30.2

[PATCH 4.14 47/88] tracing: Do not stop recording comms if the trace file is being read

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

commit 4fdd595e4f9a1ff6d93ec702eaecae451cfc6591 upstream.

A while ago, when the "trace" file was opened, tracing was stopped, and
code was added to stop recording the comms to saved_cmdlines, for mapping
of the pids to the task name.

Code has been added that only records the comm if a trace event occurred,
and there's no reason to not trace it if the trace file is opened.

Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index badc7c13da46..0cc67bc0666e 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1737,9 +1737,6 @@ struct saved_cmdlines_buffer {
 };
 static struct saved_cmdlines_buffer *savedcmd;
 
-/* temporary disable recording */
-static atomic_t trace_record_taskinfo_disabled __read_mostly;
-
 static inline char *get_saved_cmdlines(int idx)
 {
 	return &savedcmd->saved_cmdlines[idx * TASK_COMM_LEN];
@@ -3257,9 +3254,6 @@ static void *s_start(struct seq_file *m, loff_t *pos)
 		return ERR_PTR(-EBUSY);
 #endif
 
-	if (!iter->snapshot)
-		atomic_inc(&trace_record_taskinfo_disabled);
-
 	if (*pos != iter->pos) {
 		iter->ent = NULL;
 		iter->cpu = 0;
@@ -3302,9 +3296,6 @@ static void s_stop(struct seq_file *m, void *p)
 		return;
 #endif
 
-	if (!iter->snapshot)
-		atomic_dec(&trace_record_taskinfo_disabled);
-
 	trace_access_unlock(iter->cpu_file);
 	trace_event_read_unlock();
 }
-- 
2.30.2

[PATCH 4.14 48/88] tracing: Do no increment trace_clock_global() by one

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

commit 89529d8b8f8daf92d9979382b8d2eb39966846ea upstream.

The trace_clock_global() tries to make sure the events between CPUs is
somewhat in order. A global value is used and updated by the latest read
of a clock. If one CPU is ahead by a little, and is read by another CPU, a
lock is taken, and if the timestamp of the other CPU is behind, it will
simply use the other CPUs timestamp.

The lock is also only taken with a "trylock" due to tracing, and strange
recursions can happen. The lock is not taken at all in NMI context.

In the case where the lock is not able to be taken, the non synced
timestamp is returned. But it will not be less than the saved global
timestamp.

The problem arises because when the time goes "backwards" the time
returned is the saved timestamp plus 1. If the lock is not taken, and the
plus one to the timestamp is returned, there's a small race that can cause
the time to go backwards!

	CPU0				CPU1
	----				----
				trace_clock_global() {
				    ts = clock() [ 1000 ]
				    trylock(clock_lock) [ success ]
				    global_ts = ts; [ 1000 ]

				    <interrupted by NMI>
 trace_clock_global() {
    ts = clock() [ 999 ]
    if (ts < global_ts)
	ts = global_ts + 1 [ 1001 ]

    trylock(clock_lock) [ fail ]

    return ts [ 1001]
 }
				    unlock(clock_lock);
				    return ts; [ 1000 ]
				}

 trace_clock_global() {
    ts = clock() [ 1000 ]
    if (ts < global_ts) [ false 1000 == 1000 ]

    trylock(clock_lock) [ success ]
    global_ts = ts; [ 1000 ]
    unlock(clock_lock)

    return ts; [ 1000 ]
 }

The above case shows to reads of trace_clock_global() on the same CPU, but
the second read returns one less than the first read. That is, time when
backwards, and this is not what is allowed by trace_clock_global().

This was triggered by heavy tracing and the ring buffer checker that tests
for the clock going backwards:

 Ring buffer clock went backwards: 20613921464 -> 20613921463
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0
 Modules linked in:
 [..]
 [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463
   [20613915818] PAGE TIME STAMP
   [20613915818] delta:0
   [20613915819] delta:1
   [20613916035] delta:216
   [20613916465] delta:430
   [20613916575] delta:110
   [20613916749] delta:174
   [20613917248] delta:499
   [20613917333] delta:85
   [20613917775] delta:442
   [20613917921] delta:146
   [20613918321] delta:400
   [20613918568] delta:247
   [20613918768] delta:200
   [20613919306] delta:538
   [20613919353] delta:47
   [20613919980] delta:627
   [20613920296] delta:316
   [20613920571] delta:275
   [20613920862] delta:291
   [20613921152] delta:290
   [20613921464] delta:312
   [20613921464] delta:0 TIME EXTEND
   [20613921464] delta:0

This happened more than once, and always for an off by one result. It also
started happening after commit aafe104aa9096 was added.

Cc: stable@vger.kernel.org
Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index c82875834c42..b3b02d2c2926 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -114,9 +114,9 @@ u64 notrace trace_clock_global(void)
 	prev_time = READ_ONCE(trace_clock_struct.prev_time);
 	now = sched_clock_cpu(this_cpu);
 
-	/* Make sure that now is always greater than prev_time */
+	/* Make sure that now is always greater than or equal to prev_time */
 	if ((s64)(now - prev_time) < 0)
-		now = prev_time + 1;
+		now = prev_time;
 
 	/*
 	 * If in an NMI context then dont risk lockups and simply return
@@ -130,7 +130,7 @@ u64 notrace trace_clock_global(void)
 		/* Reread prev_time in case it was already updated */
 		prev_time = READ_ONCE(trace_clock_struct.prev_time);
 		if ((s64)(now - prev_time) < 0)
-			now = prev_time + 1;
+			now = prev_time;
 
 		trace_clock_struct.prev_time = now;
 
-- 
2.30.2

[PATCH 4.14 49/88] PCI: Mark TI C667X to avoid bus reset

[Sasha Levin]

From: Antti Järvinen <antti.jarvinen@gmail.com>

commit b5cf198e74a91073d12839a3e2db99994a39995d upstream.

Some TI KeyStone C667X devices do not support bus/hot reset.  The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working.  Prevent bus reset for these devices.  With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.

Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com
Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 510cb05aa96f..f0cd8f7ce881 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3402,6 +3402,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
 
+/*
+ * Some TI KeyStone C667X devices do not support bus/hot reset.  The PCIESS
+ * automatically disables LTSSM when Secondary Bus Reset is received and
+ * the device stops working.  Prevent bus reset for these devices.  With
+ * this change, the device can be assigned to VMs with VFIO, but it will
+ * leak state between VMs.  Reference
+ * https://e2e.ti.com/support/processors/f/791/t/954382
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
+
 static void quirk_no_pm_reset(struct pci_dev *dev)
 {
 	/*
-- 
2.30.2

[PATCH 4.14 50/88] PCI: Mark some NVIDIA GPUs to avoid bus reset

[Sasha Levin]

From: Shanker Donthineni <sdonthineni@nvidia.com>

commit 4c207e7121fa92b66bf1896bf8ccb9edfb0f9731 upstream.

Some NVIDIA GPU devices do not work with SBR.  Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.

This issue will be fixed in the next generation of hardware.

Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f0cd8f7ce881..de7d65971d7f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3389,6 +3389,18 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
 	dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
 }
 
+/*
+ * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
+ * prevented for those affected devices.
+ */
+static void quirk_nvidia_no_bus_reset(struct pci_dev *dev)
+{
+	if ((dev->device & 0xffc0) == 0x2340)
+		quirk_no_bus_reset(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+			 quirk_nvidia_no_bus_reset);
+
 /*
  * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
  * The device will throw a Link Down error on AER-capable systems and
-- 
2.30.2

[PATCH 4.14 51/88] PCI: Add ACS quirk for Broadcom BCM57414 NIC

[Sasha Levin]

From: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>

commit db2f77e2bd99dbd2fb23ddde58f0fae392fe3338 upstream.

The Broadcom BCM57414 NIC may be a multi-function device.  While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index de7d65971d7f..3602e967e96a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4684,6 +4684,8 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
 	{ PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
 	{ PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
+	/* Broadcom multi-function device */
+	{ PCI_VENDOR_ID_BROADCOM, 0x16D7, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
 	{ 0 }
 };
-- 
2.30.2

[PATCH 4.14 52/88] PCI: Work around Huawei Intelligent NIC VF FLR erratum

[Sasha Levin]

From: Chiqijun <chiqijun@huawei.com>

commit ce00322c2365e1f7b0312f2f493539c833465d97 upstream.

pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete.  It assumes the FLR is complete when a config read returns
valid data.

When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially.  The VF may respond to config
reads before the firmware has completed its reset processing.  If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.

Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing.  Not all NIC firmware supports this feature.

[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com
Signed-off-by: Chiqijun <chiqijun@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c | 65 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 3602e967e96a..db1ec8209b56 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3875,6 +3875,69 @@ static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
 #define PCI_DEVICE_ID_INTEL_IVB_M_VGA      0x0156
 #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA     0x0166
 
+#define PCI_DEVICE_ID_HINIC_VF      0x375E
+#define HINIC_VF_FLR_TYPE           0x1000
+#define HINIC_VF_FLR_CAP_BIT        (1UL << 30)
+#define HINIC_VF_OP                 0xE80
+#define HINIC_VF_FLR_PROC_BIT       (1UL << 18)
+#define HINIC_OPERATION_TIMEOUT     15000	/* 15 seconds */
+
+/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
+static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
+{
+	unsigned long timeout;
+	void __iomem *bar;
+	u32 val;
+
+	if (probe)
+		return 0;
+
+	bar = pci_iomap(pdev, 0, 0);
+	if (!bar)
+		return -ENOTTY;
+
+	/* Get and check firmware capabilities */
+	val = ioread32be(bar + HINIC_VF_FLR_TYPE);
+	if (!(val & HINIC_VF_FLR_CAP_BIT)) {
+		pci_iounmap(pdev, bar);
+		return -ENOTTY;
+	}
+
+	/* Set HINIC_VF_FLR_PROC_BIT for the start of FLR */
+	val = ioread32be(bar + HINIC_VF_OP);
+	val = val | HINIC_VF_FLR_PROC_BIT;
+	iowrite32be(val, bar + HINIC_VF_OP);
+
+	pcie_flr(pdev);
+
+	/*
+	 * The device must recapture its Bus and Device Numbers after FLR
+	 * in order generate Completions.  Issue a config write to let the
+	 * device capture this information.
+	 */
+	pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
+
+	/* Firmware clears HINIC_VF_FLR_PROC_BIT when reset is complete */
+	timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
+	do {
+		val = ioread32be(bar + HINIC_VF_OP);
+		if (!(val & HINIC_VF_FLR_PROC_BIT))
+			goto reset_complete;
+		msleep(20);
+	} while (time_before(jiffies, timeout));
+
+	val = ioread32be(bar + HINIC_VF_OP);
+	if (!(val & HINIC_VF_FLR_PROC_BIT))
+		goto reset_complete;
+
+	pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
+
+reset_complete:
+	pci_iounmap(pdev, bar);
+
+	return 0;
+}
+
 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
 		 reset_intel_82599_sfp_virtfn },
@@ -3884,6 +3947,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
 		reset_ivb_igd },
 	{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
 		reset_chelsio_generic_dev },
+	{ PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
+		reset_hinic_vf_dev },
 	{ 0 }
 };
 
-- 
2.30.2

[PATCH 4.14 53/88] ARCv2: save ABI registers across signal handling

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

commit 96f1b00138cb8f04c742c82d0a7c460b2202e887 upstream.

ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).

This patch fixes the issue by
 - adding arcv2 ABI regs to kernel struct sigcontext
 - populating them during signal handling

Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
 - it has only been extended (existing fields are not touched)
 - the old sigcontext was ABI incomplete to begin with anyways

Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: <stable@vger.kernel.org>
Tested-by: kernel test robot <lkp@intel.com>
Reported-by: Vladimir Isaev <isaev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arc/include/uapi/asm/sigcontext.h |  1 +
 arch/arc/kernel/signal.c               | 43 ++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- a/arch/arc/include/uapi/asm/sigcontext.h
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index da243420bcb5..68901f6f18ba 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -64,6 +64,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -97,6 +132,10 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
 	return err ? -EFAULT : 0;
@@ -112,6 +151,10 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
 		return -EFAULT;
 
-- 
2.30.2

[PATCH 4.14 54/88] dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc

[Sasha Levin]

From: Bumyong Lee <bumyong.lee@samsung.com>

commit 4ad5dd2d7876d79507a20f026507d1a93b8fff10 upstream.

flags varible which is the input parameter of pl330_prep_dma_cyclic()
should not be used by spinlock_irq[save/restore] function.

Signed-off-by: Jongho Park <jongho7.park@samsung.com>
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210507063647.111209-1-chanho61.park@samsung.com
Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs")
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/pl330.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index c034f506e015..a8cea236099a 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2563,13 +2563,15 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 	for (i = 0; i < len / period_len; i++) {
 		desc = pl330_get_desc(pch);
 		if (!desc) {
+			unsigned long iflags;
+
 			dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
 				__func__, __LINE__);
 
 			if (!first)
 				return NULL;
 
-			spin_lock_irqsave(&pl330->pool_lock, flags);
+			spin_lock_irqsave(&pl330->pool_lock, iflags);
 
 			while (!list_empty(&first->node)) {
 				desc = list_entry(first->node.next,
@@ -2579,7 +2581,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 
 			list_move_tail(&first->node, &pl330->desc_pool);
 
-			spin_unlock_irqrestore(&pl330->pool_lock, flags);
+			spin_unlock_irqrestore(&pl330->pool_lock, iflags);
 
 			return NULL;
 		}
-- 
2.30.2

[PATCH 4.14 55/88] net: bridge: fix vlan tunnel dst null pointer dereference

[Sasha Levin]

From: Nikolay Aleksandrov <nikolay@nvidia.com>

commit 58e2071742e38f29f051b709a5cca014ba51166f upstream.

This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path.

Cc: stable@vger.kernel.org
Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_private.h     |  4 ++--
 net/bridge/br_vlan_tunnel.c | 38 +++++++++++++++++++++++--------------
 2 files changed, 26 insertions(+), 16 deletions(-)

diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 14ff034e561c..50a55553a25c 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -93,8 +93,8 @@ struct br_vlan_stats {
 };
 
 struct br_tunnel_info {
-	__be64			tunnel_id;
-	struct metadata_dst	*tunnel_dst;
+	__be64				tunnel_id;
+	struct metadata_dst __rcu	*tunnel_dst;
 };
 
 /**
diff --git a/net/bridge/br_vlan_tunnel.c b/net/bridge/br_vlan_tunnel.c
index 6d2c4eed2dc8..4d5100677c68 100644
--- a/net/bridge/br_vlan_tunnel.c
+++ b/net/bridge/br_vlan_tunnel.c
@@ -46,26 +46,33 @@ static struct net_bridge_vlan *br_vlan_tunnel_lookup(struct rhashtable *tbl,
 				      br_vlan_tunnel_rht_params);
 }
 
+static void vlan_tunnel_info_release(struct net_bridge_vlan *vlan)
+{
+	struct metadata_dst *tdst = rtnl_dereference(vlan->tinfo.tunnel_dst);
+
+	WRITE_ONCE(vlan->tinfo.tunnel_id, 0);
+	RCU_INIT_POINTER(vlan->tinfo.tunnel_dst, NULL);
+	dst_release(&tdst->dst);
+}
+
 void vlan_tunnel_info_del(struct net_bridge_vlan_group *vg,
 			  struct net_bridge_vlan *vlan)
 {
-	if (!vlan->tinfo.tunnel_dst)
+	if (!rcu_access_pointer(vlan->tinfo.tunnel_dst))
 		return;
 	rhashtable_remove_fast(&vg->tunnel_hash, &vlan->tnode,
 			       br_vlan_tunnel_rht_params);
-	vlan->tinfo.tunnel_id = 0;
-	dst_release(&vlan->tinfo.tunnel_dst->dst);
-	vlan->tinfo.tunnel_dst = NULL;
+	vlan_tunnel_info_release(vlan);
 }
 
 static int __vlan_tunnel_info_add(struct net_bridge_vlan_group *vg,
 				  struct net_bridge_vlan *vlan, u32 tun_id)
 {
-	struct metadata_dst *metadata = NULL;
+	struct metadata_dst *metadata = rtnl_dereference(vlan->tinfo.tunnel_dst);
 	__be64 key = key32_to_tunnel_id(cpu_to_be32(tun_id));
 	int err;
 
-	if (vlan->tinfo.tunnel_dst)
+	if (metadata)
 		return -EEXIST;
 
 	metadata = __ip_tun_set_dst(0, 0, 0, 0, 0, TUNNEL_KEY,
@@ -74,8 +81,8 @@ static int __vlan_tunnel_info_add(struct net_bridge_vlan_group *vg,
 		return -EINVAL;
 
 	metadata->u.tun_info.mode |= IP_TUNNEL_INFO_TX | IP_TUNNEL_INFO_BRIDGE;
-	vlan->tinfo.tunnel_dst = metadata;
-	vlan->tinfo.tunnel_id = key;
+	rcu_assign_pointer(vlan->tinfo.tunnel_dst, metadata);
+	WRITE_ONCE(vlan->tinfo.tunnel_id, key);
 
 	err = rhashtable_lookup_insert_fast(&vg->tunnel_hash, &vlan->tnode,
 					    br_vlan_tunnel_rht_params);
@@ -84,9 +91,7 @@ static int __vlan_tunnel_info_add(struct net_bridge_vlan_group *vg,
 
 	return 0;
 out:
-	dst_release(&vlan->tinfo.tunnel_dst->dst);
-	vlan->tinfo.tunnel_dst = NULL;
-	vlan->tinfo.tunnel_id = 0;
+	vlan_tunnel_info_release(vlan);
 
 	return err;
 }
@@ -186,12 +191,15 @@ int br_handle_ingress_vlan_tunnel(struct sk_buff *skb,
 int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
 				 struct net_bridge_vlan *vlan)
 {
+	struct metadata_dst *tunnel_dst;
+	__be64 tunnel_id;
 	int err;
 
-	if (!vlan || !vlan->tinfo.tunnel_id)
+	if (!vlan)
 		return 0;
 
-	if (unlikely(!skb_vlan_tag_present(skb)))
+	tunnel_id = READ_ONCE(vlan->tinfo.tunnel_id);
+	if (!tunnel_id || unlikely(!skb_vlan_tag_present(skb)))
 		return 0;
 
 	skb_dst_drop(skb);
@@ -199,7 +207,9 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
 	if (err)
 		return err;
 
-	skb_dst_set(skb, dst_clone(&vlan->tinfo.tunnel_dst->dst));
+	tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
+	if (tunnel_dst)
+		skb_dst_set(skb, dst_clone(&tunnel_dst->dst));
 
 	return 0;
 }
-- 
2.30.2

[PATCH 4.14 56/88] net: bridge: fix vlan tunnel dst refcnt when egressing

[Sasha Levin]

From: Nikolay Aleksandrov <nikolay@nvidia.com>

commit cfc579f9d89af4ada58c69b03bcaa4887840f3b3 upstream.

The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.

[1] dmesg WARN_ON log and following refcnt errors
 WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
 CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G        W         5.13.0-rc3+ #360
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
 FS:  0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
 Call Trace:
  br_handle_vlan+0xbc/0xca [bridge]
  __br_forward+0x23/0x164 [bridge]
  deliver_clone+0x41/0x48 [bridge]
  br_handle_frame_finish+0x36f/0x3aa [bridge]
  ? skb_dst+0x2e/0x38 [bridge]
  ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  br_handle_frame+0x2c3/0x377 [bridge]
  ? __skb_pull+0x33/0x51
  ? vlan_do_receive+0x4f/0x36a
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  __netif_receive_skb_core+0x539/0x7c6
  ? __list_del_entry_valid+0x16e/0x1c2
  __netif_receive_skb_list_core+0x6d/0xd6
  netif_receive_skb_list_internal+0x1d9/0x1fa
  gro_normal_list+0x22/0x3e
  dev_gro_receive+0x55b/0x600
  ? detach_buf_split+0x58/0x140
  napi_gro_receive+0x94/0x12e
  virtnet_poll+0x15d/0x315 [virtio_net]
  __napi_poll+0x2c/0x1c9
  net_rx_action+0xe6/0x1fb
  __do_softirq+0x115/0x2d8
  run_ksoftirqd+0x18/0x20
  smpboot_thread_fn+0x183/0x19c
  ? smpboot_unregister_percpu_thread+0x66/0x66
  kthread+0x10a/0x10f
  ? kthread_mod_delayed_work+0xb6/0xb6
  ret_from_fork+0x22/0x30
 ---[ end trace 49f61b07f775fd2b ]---
 dst_release: dst:00000000c02d677a refcnt:-1
 dst_release underflow

Cc: stable@vger.kernel.org
Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_vlan_tunnel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bridge/br_vlan_tunnel.c b/net/bridge/br_vlan_tunnel.c
index 4d5100677c68..adb6845ceba4 100644
--- a/net/bridge/br_vlan_tunnel.c
+++ b/net/bridge/br_vlan_tunnel.c
@@ -208,8 +208,8 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
 		return err;
 
 	tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
-	if (tunnel_dst)
-		skb_dst_set(skb, dst_clone(&tunnel_dst->dst));
+	if (tunnel_dst && dst_hold_safe(&tunnel_dst->dst))
+		skb_dst_set(skb, &tunnel_dst->dst);
 
 	return 0;
 }
-- 
2.30.2

[PATCH 4.14 57/88] mm/slub.c: include swab.h

[Sasha Levin]

From: Andrew Morton <akpm@linux-foundation.org>

commit 1b3865d016815cbd69a1879ca1c8a8901fda1072 upstream.

Fixes build with CONFIG_SLAB_FREELIST_HARDENED=y.

Hopefully.  But it's the right thing to do anwyay.

Fixes: 1ad53d9fa3f61 ("slub: improve bit diffusion for freelist ptr obfuscation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213417
Reported-by: <vannguye@cisco.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/slub.c b/mm/slub.c
index a0cb3568b0b5..484a75296a12 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/bit_spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/swab.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include "slab.h"
-- 
2.30.2

[PATCH 4.14 58/88] net: fec_ptp: add clock rate zero check

[Sasha Levin]

From: Fugang Duan <fugang.duan@nxp.com>

commit cb3cefe3f3f8af27c6076ef7d1f00350f502055d upstream.

Add clock rate zero check to fix coverity issue of "divide by 0".

Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec_ptp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index e63df6455fba..40c5c09f60dc 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -586,6 +586,10 @@ void fec_ptp_init(struct platform_device *pdev)
 	fep->ptp_caps.enable = fec_ptp_enable;
 
 	fep->cycle_speed = clk_get_rate(fep->clk_ptp);
+	if (!fep->cycle_speed) {
+		fep->cycle_speed = NSEC_PER_SEC;
+		dev_err(&fep->pdev->dev, "clk_ptp clock rate is zero\n");
+	}
 	fep->ptp_inc = NSEC_PER_SEC / fep->cycle_speed;
 
 	spin_lock_init(&fep->tmreg_lock);
-- 
2.30.2

[PATCH 4.14 59/88] can: bcm/raw/isotp: use per module netdevice notifier

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

commit 8d0caedb759683041d9db82069937525999ada53 upstream.

syzbot is reporting hung task at register_netdevice_notifier() [1] and
unregister_netdevice_notifier() [2], for cleanup_net() might perform
time consuming operations while CAN driver's raw/bcm/isotp modules are
calling {register,unregister}_netdevice_notifier() on each socket.

Change raw/bcm/isotp modules to call register_netdevice_notifier() from
module's __init function and call unregister_netdevice_notifier() from
module's __exit function, as with gw/j1939 modules are doing.

Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1]
Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2]
Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/bcm.c | 59 +++++++++++++++++++++++++++++++++++++-----------
 net/can/raw.c | 62 +++++++++++++++++++++++++++++++++++++++------------
 2 files changed, 94 insertions(+), 27 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index f691afcc5b8b..8c8b02e54432 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -125,7 +125,7 @@ struct bcm_sock {
 	struct sock sk;
 	int bound;
 	int ifindex;
-	struct notifier_block notifier;
+	struct list_head notifier;
 	struct list_head rx_ops;
 	struct list_head tx_ops;
 	unsigned long dropped_usr_msgs;
@@ -133,6 +133,10 @@ struct bcm_sock {
 	char procname [32]; /* inode number in decimal with \0 */
 };
 
+static LIST_HEAD(bcm_notifier_list);
+static DEFINE_SPINLOCK(bcm_notifier_lock);
+static struct bcm_sock *bcm_busy_notifier;
+
 static inline struct bcm_sock *bcm_sk(const struct sock *sk)
 {
 	return (struct bcm_sock *)sk;
@@ -1442,20 +1446,15 @@ static int bcm_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 /*
  * notification handler for netdevice status changes
  */
-static int bcm_notifier(struct notifier_block *nb, unsigned long msg,
-			void *ptr)
+static void bcm_notify(struct bcm_sock *bo, unsigned long msg,
+		       struct net_device *dev)
 {
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-	struct bcm_sock *bo = container_of(nb, struct bcm_sock, notifier);
 	struct sock *sk = &bo->sk;
 	struct bcm_op *op;
 	int notify_enodev = 0;
 
 	if (!net_eq(dev_net(dev), sock_net(sk)))
-		return NOTIFY_DONE;
-
-	if (dev->type != ARPHRD_CAN)
-		return NOTIFY_DONE;
+		return;
 
 	switch (msg) {
 
@@ -1490,7 +1489,28 @@ static int bcm_notifier(struct notifier_block *nb, unsigned long msg,
 				sk->sk_error_report(sk);
 		}
 	}
+}
 
+static int bcm_notifier(struct notifier_block *nb, unsigned long msg,
+			void *ptr)
+{
+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+	if (dev->type != ARPHRD_CAN)
+		return NOTIFY_DONE;
+	if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN)
+		return NOTIFY_DONE;
+	if (unlikely(bcm_busy_notifier)) /* Check for reentrant bug. */
+		return NOTIFY_DONE;
+
+	spin_lock(&bcm_notifier_lock);
+	list_for_each_entry(bcm_busy_notifier, &bcm_notifier_list, notifier) {
+		spin_unlock(&bcm_notifier_lock);
+		bcm_notify(bcm_busy_notifier, msg, dev);
+		spin_lock(&bcm_notifier_lock);
+	}
+	bcm_busy_notifier = NULL;
+	spin_unlock(&bcm_notifier_lock);
 	return NOTIFY_DONE;
 }
 
@@ -1510,9 +1530,9 @@ static int bcm_init(struct sock *sk)
 	INIT_LIST_HEAD(&bo->rx_ops);
 
 	/* set notifier */
-	bo->notifier.notifier_call = bcm_notifier;
-
-	register_netdevice_notifier(&bo->notifier);
+	spin_lock(&bcm_notifier_lock);
+	list_add_tail(&bo->notifier, &bcm_notifier_list);
+	spin_unlock(&bcm_notifier_lock);
 
 	return 0;
 }
@@ -1535,7 +1555,14 @@ static int bcm_release(struct socket *sock)
 
 	/* remove bcm_ops, timer, rx_unregister(), etc. */
 
-	unregister_netdevice_notifier(&bo->notifier);
+	spin_lock(&bcm_notifier_lock);
+	while (bcm_busy_notifier == bo) {
+		spin_unlock(&bcm_notifier_lock);
+		schedule_timeout_uninterruptible(1);
+		spin_lock(&bcm_notifier_lock);
+	}
+	list_del(&bo->notifier);
+	spin_unlock(&bcm_notifier_lock);
 
 	lock_sock(sk);
 
@@ -1750,6 +1777,10 @@ static struct pernet_operations canbcm_pernet_ops __read_mostly = {
 	.exit = canbcm_pernet_exit,
 };
 
+static struct notifier_block canbcm_notifier = {
+	.notifier_call = bcm_notifier
+};
+
 static int __init bcm_module_init(void)
 {
 	int err;
@@ -1763,12 +1794,14 @@ static int __init bcm_module_init(void)
 	}
 
 	register_pernet_subsys(&canbcm_pernet_ops);
+	register_netdevice_notifier(&canbcm_notifier);
 	return 0;
 }
 
 static void __exit bcm_module_exit(void)
 {
 	can_proto_unregister(&bcm_can_proto);
+	unregister_netdevice_notifier(&canbcm_notifier);
 	unregister_pernet_subsys(&canbcm_pernet_ops);
 }
 
diff --git a/net/can/raw.c b/net/can/raw.c
index e1f26441b49a..24af08164b61 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -84,7 +84,7 @@ struct raw_sock {
 	struct sock sk;
 	int bound;
 	int ifindex;
-	struct notifier_block notifier;
+	struct list_head notifier;
 	int loopback;
 	int recv_own_msgs;
 	int fd_frames;
@@ -96,6 +96,10 @@ struct raw_sock {
 	struct uniqframe __percpu *uniq;
 };
 
+static LIST_HEAD(raw_notifier_list);
+static DEFINE_SPINLOCK(raw_notifier_lock);
+static struct raw_sock *raw_busy_notifier;
+
 /*
  * Return pointer to store the extra msg flags for raw_recvmsg().
  * We use the space of one unsigned int beyond the 'struct sockaddr_can'
@@ -266,21 +270,16 @@ static int raw_enable_allfilters(struct net *net, struct net_device *dev,
 	return err;
 }
 
-static int raw_notifier(struct notifier_block *nb,
-			unsigned long msg, void *ptr)
+static void raw_notify(struct raw_sock *ro, unsigned long msg,
+		       struct net_device *dev)
 {
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-	struct raw_sock *ro = container_of(nb, struct raw_sock, notifier);
 	struct sock *sk = &ro->sk;
 
 	if (!net_eq(dev_net(dev), sock_net(sk)))
-		return NOTIFY_DONE;
-
-	if (dev->type != ARPHRD_CAN)
-		return NOTIFY_DONE;
+		return;
 
 	if (ro->ifindex != dev->ifindex)
-		return NOTIFY_DONE;
+		return;
 
 	switch (msg) {
 
@@ -309,7 +308,28 @@ static int raw_notifier(struct notifier_block *nb,
 			sk->sk_error_report(sk);
 		break;
 	}
+}
+
+static int raw_notifier(struct notifier_block *nb, unsigned long msg,
+			void *ptr)
+{
+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+	if (dev->type != ARPHRD_CAN)
+		return NOTIFY_DONE;
+	if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN)
+		return NOTIFY_DONE;
+	if (unlikely(raw_busy_notifier)) /* Check for reentrant bug. */
+		return NOTIFY_DONE;
 
+	spin_lock(&raw_notifier_lock);
+	list_for_each_entry(raw_busy_notifier, &raw_notifier_list, notifier) {
+		spin_unlock(&raw_notifier_lock);
+		raw_notify(raw_busy_notifier, msg, dev);
+		spin_lock(&raw_notifier_lock);
+	}
+	raw_busy_notifier = NULL;
+	spin_unlock(&raw_notifier_lock);
 	return NOTIFY_DONE;
 }
 
@@ -338,9 +358,9 @@ static int raw_init(struct sock *sk)
 		return -ENOMEM;
 
 	/* set notifier */
-	ro->notifier.notifier_call = raw_notifier;
-
-	register_netdevice_notifier(&ro->notifier);
+	spin_lock(&raw_notifier_lock);
+	list_add_tail(&ro->notifier, &raw_notifier_list);
+	spin_unlock(&raw_notifier_lock);
 
 	return 0;
 }
@@ -355,7 +375,14 @@ static int raw_release(struct socket *sock)
 
 	ro = raw_sk(sk);
 
-	unregister_netdevice_notifier(&ro->notifier);
+	spin_lock(&raw_notifier_lock);
+	while (raw_busy_notifier == ro) {
+		spin_unlock(&raw_notifier_lock);
+		schedule_timeout_uninterruptible(1);
+		spin_lock(&raw_notifier_lock);
+	}
+	list_del(&ro->notifier);
+	spin_unlock(&raw_notifier_lock);
 
 	lock_sock(sk);
 
@@ -870,6 +897,10 @@ static const struct can_proto raw_can_proto = {
 	.prot       = &raw_proto,
 };
 
+static struct notifier_block canraw_notifier = {
+	.notifier_call = raw_notifier
+};
+
 static __init int raw_module_init(void)
 {
 	int err;
@@ -879,6 +910,8 @@ static __init int raw_module_init(void)
 	err = can_proto_register(&raw_can_proto);
 	if (err < 0)
 		printk(KERN_ERR "can: registration of raw protocol failed\n");
+	else
+		register_netdevice_notifier(&canraw_notifier);
 
 	return err;
 }
@@ -886,6 +919,7 @@ static __init int raw_module_init(void)
 static __exit void raw_module_exit(void)
 {
 	can_proto_unregister(&raw_can_proto);
+	unregister_netdevice_notifier(&canraw_notifier);
 }
 
 module_init(raw_module_init);
-- 
2.30.2

[PATCH 4.14 60/88] inet: use bigger hash table for IP ID generation

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

commit aa6dd211e4b1dde9d5dc25d699d35f789ae7eeba upstream.

In commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.

Switch to a dynamic sizing, depending on RAM size.

Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.

As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.

Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c | 41 ++++++++++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 13 deletions(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 78d6bc61a1d8..81901b052907 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -70,6 +70,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/bootmem.h>
 #include <linux/string.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
@@ -485,8 +486,10 @@ static void ipv4_confirm_neigh(const struct dst_entry *dst, const void *daddr)
 	__ipv4_confirm_neigh(dev, *(__force u32 *)pkey);
 }
 
-#define IP_IDENTS_SZ 2048u
-
+/* Hash tables of size 2048..262144 depending on RAM size.
+ * Each bucket uses 8 bytes.
+ */
+static u32 ip_idents_mask __read_mostly;
 static atomic_t *ip_idents __read_mostly;
 static u32 *ip_tstamps __read_mostly;
 
@@ -496,12 +499,16 @@ static u32 *ip_tstamps __read_mostly;
  */
 u32 ip_idents_reserve(u32 hash, int segs)
 {
-	u32 *p_tstamp = ip_tstamps + hash % IP_IDENTS_SZ;
-	atomic_t *p_id = ip_idents + hash % IP_IDENTS_SZ;
-	u32 old = ACCESS_ONCE(*p_tstamp);
-	u32 now = (u32)jiffies;
+	u32 bucket, old, now = (u32)jiffies;
+	atomic_t *p_id;
+	u32 *p_tstamp;
 	u32 delta = 0;
 
+	bucket = hash & ip_idents_mask;
+	p_tstamp = ip_tstamps + bucket;
+	p_id = ip_idents + bucket;
+	old = ACCESS_ONCE(*p_tstamp);
+
 	if (old != now && cmpxchg(p_tstamp, old, now) == old)
 		delta = prandom_u32_max(now - old);
 
@@ -3098,18 +3105,26 @@ struct ip_rt_acct __percpu *ip_rt_acct __read_mostly;
 
 int __init ip_rt_init(void)
 {
+	void *idents_hash;
 	int rc = 0;
 	int cpu;
 
-	ip_idents = kmalloc(IP_IDENTS_SZ * sizeof(*ip_idents), GFP_KERNEL);
-	if (!ip_idents)
-		panic("IP: failed to allocate ip_idents\n");
+	/* For modern hosts, this will use 2 MB of memory */
+	idents_hash = alloc_large_system_hash("IP idents",
+					      sizeof(*ip_idents) + sizeof(*ip_tstamps),
+					      0,
+					      16, /* one bucket per 64 KB */
+					      HASH_ZERO,
+					      NULL,
+					      &ip_idents_mask,
+					      2048,
+					      256*1024);
+
+	ip_idents = idents_hash;
 
-	prandom_bytes(ip_idents, IP_IDENTS_SZ * sizeof(*ip_idents));
+	prandom_bytes(ip_idents, (ip_idents_mask + 1) * sizeof(*ip_idents));
 
-	ip_tstamps = kcalloc(IP_IDENTS_SZ, sizeof(*ip_tstamps), GFP_KERNEL);
-	if (!ip_tstamps)
-		panic("IP: failed to allocate ip_tstamps\n");
+	ip_tstamps = idents_hash + (ip_idents_mask + 1) * sizeof(*ip_idents);
 
 	for_each_possible_cpu(cpu) {
 		struct uncached_list *ul = &per_cpu(rt_uncached_list, cpu);
-- 
2.30.2

[PATCH 4.14 61/88] usb: dwc3: core: fix kernel panic when do reboot

[Sasha Levin]

From: Peter Chen <peter.chen@kernel.org>

commit 4bf584a03eec674975ee9fe36c8583d9d470dab1 upstream.

When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.

[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119]  inode_permission+0x2c/0x198
[ 2925.127042]  lookup_one_len_common+0xb0/0xf8
[ 2925.131315]  lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764]  lookup_positive_unlocked+0x14/0x50
[ 2925.140296]  debugfs_lookup+0x68/0xa0
[ 2925.143964]  dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675]  dwc3_gadget_exit+0x28/0x78
[ 2925.152518]  dwc3_drd_exit+0x100/0x1f8
[ 2925.156267]  dwc3_remove+0x11c/0x120
[ 2925.159851]  dwc3_shutdown+0x14/0x20
[ 2925.163432]  platform_shutdown+0x28/0x38
[ 2925.167360]  device_shutdown+0x15c/0x378
[ 2925.171291]  kernel_restart_prepare+0x3c/0x48
[ 2925.175650]  kernel_restart+0x1c/0x68
[ 2925.179316]  __do_sys_reboot+0x218/0x240
[ 2925.183247]  __arm64_sys_reboot+0x28/0x30
[ 2925.187262]  invoke_syscall+0x48/0x100
[ 2925.191017]  el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726]  do_el0_svc+0x28/0x88
[ 2925.199045]  el0_svc+0x20/0x30
[ 2925.202104]  el0_sync_handler+0xa8/0xb0
[ 2925.205942]  el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham <jackp@codeaurora.org>
Tested-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org
(cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068)
Link: https://lore.kernel.org/r/20210615080847.GA10432@jackp-linux.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f3fca4537d25..0e179274ba7c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1337,8 +1337,8 @@ static int dwc3_remove(struct platform_device *pdev)
 	 */
 	res->start -= DWC3_GLOBALS_REGS_START;
 
-	dwc3_debugfs_exit(dwc);
 	dwc3_core_exit_mode(dwc);
+	dwc3_debugfs_exit(dwc);
 
 	dwc3_core_exit(dwc);
 	dwc3_ulpi_exit(dwc);
-- 
2.30.2

[PATCH 4.14 62/88] kernfs: deal with kernfs_fill_super() failures

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 82382acec0c97b91830fff7130d0acce4ac4f3f3 upstream.

make sure that info->node is initialized early, so that kernfs_kill_sb()
can list_del() it safely.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/kernfs/mount.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/kernfs/mount.c b/fs/kernfs/mount.c
index 5019058e0f6a..610267585f8f 100644
--- a/fs/kernfs/mount.c
+++ b/fs/kernfs/mount.c
@@ -320,6 +320,7 @@ struct dentry *kernfs_mount_ns(struct file_system_type *fs_type, int flags,
 
 	info->root = root;
 	info->ns = ns;
+	INIT_LIST_HEAD(&info->node);
 
 	sb = sget_userns(fs_type, kernfs_test_super, kernfs_set_super, flags,
 			 &init_user_ns, info);
-- 
2.30.2

[PATCH 4.14 63/88] unfuck sysfs_mount()

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 7b745a4e4051e1bbce40e0b1c2cf636c70583aa4 upstream.

new_sb is left uninitialized in case of early failures in kernfs_mount_ns(),
and while IS_ERR(root) is true in all such cases, using IS_ERR(root) || !new_sb
is not a solution - IS_ERR(root) is true in some cases when new_sb is true.

Make sure new_sb is initialized (and matches the reality) in all cases and
fix the condition for dropping kobj reference - we want it done precisely
in those situations where the reference has not been transferred into a new
super_block instance.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/sysfs/mount.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 20b8f82e115b..2bbe84d9c0a8 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -28,7 +28,7 @@ static struct dentry *sysfs_mount(struct file_system_type *fs_type,
 {
 	struct dentry *root;
 	void *ns;
-	bool new_sb;
+	bool new_sb = false;
 
 	if (!(flags & MS_KERNMOUNT)) {
 		if (!kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET))
@@ -38,9 +38,9 @@ static struct dentry *sysfs_mount(struct file_system_type *fs_type,
 	ns = kobj_ns_grab_current(KOBJ_NS_TYPE_NET);
 	root = kernfs_mount_ns(fs_type, flags, sysfs_root,
 				SYSFS_MAGIC, &new_sb, ns);
-	if (IS_ERR(root) || !new_sb)
+	if (!new_sb)
 		kobj_ns_drop(KOBJ_NS_TYPE_NET, ns);
-	else if (new_sb)
+	else if (!IS_ERR(root))
 		root->d_sb->s_iflags |= SB_I_USERNS_VISIBLE;
 
 	return root;
-- 
2.30.2

[PATCH 4.14 64/88] x86/fpu: Reset state for all signal restore failures

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

commit efa165504943f2128d50f63de0c02faf6dcceb0d upstream.

If access_ok() or fpregs_soft_set() fails in __fpu__restore_sig() then the
function just returns but does not clear the FPU state as it does for all
other fatal failures.

Clear the FPU state for these failures as well.

Fixes: 72a671ced66d ("x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87mtryyhhz.ffs@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/fpu/signal.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index d99a8ee9e185..86a231338bbf 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -272,6 +272,7 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 	int state_size = fpu_kernel_xstate_size;
 	u64 xfeatures = 0;
 	int fx_only = 0;
+	int ret = 0;
 
 	ia32_fxstate &= (IS_ENABLED(CONFIG_X86_32) ||
 			 IS_ENABLED(CONFIG_IA32_EMULATION));
@@ -281,15 +282,21 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		return 0;
 	}
 
-	if (!access_ok(VERIFY_READ, buf, size))
-		return -EACCES;
+	if (!access_ok(VERIFY_READ, buf, size)) {
+		ret = -EACCES;
+		goto out_err;
+	}
 
 	fpu__initialize(fpu);
 
-	if (!static_cpu_has(X86_FEATURE_FPU))
-		return fpregs_soft_set(current, NULL,
-				       0, sizeof(struct user_i387_ia32_struct),
-				       NULL, buf) != 0;
+	if (!static_cpu_has(X86_FEATURE_FPU)) {
+		ret = fpregs_soft_set(current, NULL,
+				      0, sizeof(struct user_i387_ia32_struct),
+				      NULL, buf) != 0;
+		if (ret)
+			goto out_err;
+		return 0;
+	}
 
 	if (use_xsave()) {
 		struct _fpx_sw_bytes fx_sw_user;
@@ -349,6 +356,7 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		fpu__restore(fpu);
 		local_bh_enable();
 
+		/* Failure is already handled */
 		return err;
 	} else {
 		/*
@@ -356,13 +364,14 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 		 * state to the registers directly (with exceptions handled).
 		 */
 		user_fpu_begin();
-		if (copy_user_to_fpregs_zeroing(buf_fx, xfeatures, fx_only)) {
-			fpu__clear(fpu);
-			return -1;
-		}
+		if (!copy_user_to_fpregs_zeroing(buf_fx, xfeatures, fx_only))
+			return 0;
+		ret = -1;
 	}
 
-	return 0;
+out_err:
+	fpu__clear(fpu);
+	return ret;
 }
 
 static inline int xstate_sigframe_size(void)
-- 
2.30.2

[PATCH 4.14 65/88] drm/nouveau: wait for moving fence after pinning v2

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

commit 17b11f71795abdce46f62a808f906857e525cea8 upstream.

We actually need to wait for the moving fence after pinning
the BO to make sure that the pin is completed.

v2: grab the lock while waiting

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/
CC: stable@kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_prime.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c
index 1fefc93af1d7..bbfce7b9d03e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_prime.c
+++ b/drivers/gpu/drm/nouveau/nouveau_prime.c
@@ -98,7 +98,22 @@ int nouveau_gem_prime_pin(struct drm_gem_object *obj)
 	if (ret)
 		return -EINVAL;
 
-	return 0;
+	ret = ttm_bo_reserve(&nvbo->bo, false, false, NULL);
+	if (ret)
+		goto error;
+
+	if (nvbo->bo.moving)
+		ret = dma_fence_wait(nvbo->bo.moving, true);
+
+	ttm_bo_unreserve(&nvbo->bo);
+	if (ret)
+		goto error;
+
+	return ret;
+
+error:
+	nouveau_bo_unpin(nvbo);
+	return ret;
 }
 
 void nouveau_gem_prime_unpin(struct drm_gem_object *obj)
-- 
2.30.2

[PATCH 4.14 66/88] drm/radeon: wait for moving fence after pinning

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

commit 4b41726aae563273bb4b4a9462ba51ce4d372f78 upstream.

We actually need to wait for the moving fence after pinning
the BO to make sure that the pin is completed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/
CC: stable@kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-2-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/radeon/radeon_prime.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_prime.c b/drivers/gpu/drm/radeon/radeon_prime.c
index 7110d403322c..c138e07f51a3 100644
--- a/drivers/gpu/drm/radeon/radeon_prime.c
+++ b/drivers/gpu/drm/radeon/radeon_prime.c
@@ -92,9 +92,19 @@ int radeon_gem_prime_pin(struct drm_gem_object *obj)
 
 	/* pin buffer into GTT */
 	ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
-	if (likely(ret == 0))
-		bo->prime_shared_count++;
-
+	if (unlikely(ret))
+		goto error;
+
+	if (bo->tbo.moving) {
+		ret = dma_fence_wait(bo->tbo.moving, false);
+		if (unlikely(ret)) {
+			radeon_bo_unpin(bo);
+			goto error;
+		}
+	}
+
+	bo->prime_shared_count++;
+error:
 	radeon_bo_unreserve(bo);
 	return ret;
 }
-- 
2.30.2

[PATCH 4.14 67/88] ARM: 9081/1: fix gcc-10 thumb2-kernel regression

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

commit dad7b9896a5dbac5da8275d5a6147c65c81fb5f2 upstream.

When building the kernel wtih gcc-10 or higher using the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly
different set of registers for the inline assembly in cpu_init() that
subsequently results in a corrupt kernel stack as well as remaining in
FIQ mode. If a banked register is used for the last argument, the wrong
version of that register gets loaded into CPSR_c.  When building in Arm
mode, the arguments are passed as immediate values and the bug cannot
happen.

This got introduced when Daniel reworked the FIQ handling and was
technically always broken, but happened to work with both clang and gcc
before gcc-10 as long as they picked one of the lower registers.
This is probably an indication that still very few people build the
kernel in Thumb2 mode.

Marek pointed out the problem on IRC, Arnd narrowed it down to this
inline assembly and Russell pinpointed the exact bug.

Change the constraints to force the final mode switch to use a non-banked
register for the argument to ensure that the correct constant gets loaded.
Another alternative would be to always use registers for the constant
arguments to avoid the #ifdef that has now become more complex.

Cc: <stable@vger.kernel.org> # v3.18+
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: c0e7f7ee717e ("ARM: 8150/3: fiq: Replace default FIQ handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/setup.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index a6d27284105a..ac4ffd97ae82 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -547,9 +547,11 @@ void notrace cpu_init(void)
 	 * In Thumb-2, msr with an immediate value is not allowed.
 	 */
 #ifdef CONFIG_THUMB2_KERNEL
-#define PLC	"r"
+#define PLC_l	"l"
+#define PLC_r	"r"
 #else
-#define PLC	"I"
+#define PLC_l	"I"
+#define PLC_r	"I"
 #endif
 
 	/*
@@ -571,15 +573,15 @@ void notrace cpu_init(void)
 	"msr	cpsr_c, %9"
 	    :
 	    : "r" (stk),
-	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
 	      "I" (offsetof(struct stack, fiq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC_l (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 #endif
 }
-- 
2.30.2

[PATCH 4.14 68/88] Makefile: Move -Wno-unused-but-set-variable out of GCC only block

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

commit 885480b084696331bea61a4f7eba10652999a9c1 upstream.

Currently, -Wunused-but-set-variable is only supported by GCC so it is
disabled unconditionally in a GCC only block (it is enabled with W=1).
clang currently has its implementation for this warning in review so
preemptively move this statement out of the GCC only block and wrap it
with cc-disable-warning so that both compilers function the same.

Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D100581
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nc: Backport, workaround lack of e2079e93f562 in older branches]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index bc9833fdca1a..e2977b8f8e6a 100644
--- a/Makefile
+++ b/Makefile
@@ -716,12 +716,11 @@ KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
 # See modpost pattern 2
 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
-else
+endif
 
 # These warnings generated too much noise in a regular build.
 # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
-endif
 
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 ifdef CONFIG_FRAME_POINTER
-- 
2.30.2

[PATCH 4.14 69/88] MIPS: generic: Update node names to avoid unit addresses

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

commit e607ff630c6053ecc67502677c0e50053d7892d4 upstream.

With the latest mkimage from U-Boot 2021.04, the generic defconfigs no
longer build, failing with:

/usr/bin/mkimage: verify_header failed for FIT Image support with exit code 1

This is expected after the linked U-Boot commits because '@' is
forbidden in the node names due to the way that libfdt treats nodes with
the same prefix but different unit addresses.

Switch the '@' in the node name to '-'. Drop the unit addresses from the
hash and kernel child nodes because there is only one node so they do
not need to have a number to differentiate them.

Cc: stable@vger.kernel.org
Link: https://source.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4
Link: https://source.denx.de/u-boot/u-boot/-/commit/3f04db891a353f4b127ed57279279f851c6b4917
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
[nathan: Backport to 4.14, only apply to .its.S files that exist]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/generic/board-boston.its.S   | 10 +++++-----
 arch/mips/generic/board-ni169445.its.S | 10 +++++-----
 arch/mips/generic/vmlinux.its.S        | 10 +++++-----
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/mips/generic/board-boston.its.S b/arch/mips/generic/board-boston.its.S
index a7f51f97b910..c45ad2759421 100644
--- a/arch/mips/generic/board-boston.its.S
+++ b/arch/mips/generic/board-boston.its.S
@@ -1,22 +1,22 @@
 / {
 	images {
-		fdt@boston {
+		fdt-boston {
 			description = "img,boston Device Tree";
 			data = /incbin/("boot/dts/img/boston.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@boston {
+		conf-boston {
 			description = "Boston Linux kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@boston";
+			kernel = "kernel";
+			fdt = "fdt-boston";
 		};
 	};
 };
diff --git a/arch/mips/generic/board-ni169445.its.S b/arch/mips/generic/board-ni169445.its.S
index e4cb4f95a8cc..0a2e8f7a8526 100644
--- a/arch/mips/generic/board-ni169445.its.S
+++ b/arch/mips/generic/board-ni169445.its.S
@@ -1,22 +1,22 @@
 / {
 	images {
-		fdt@ni169445 {
+		fdt-ni169445 {
 			description = "NI 169445 device tree";
 			data = /incbin/("boot/dts/ni/169445.dtb");
 			type = "flat_dt";
 			arch = "mips";
 			compression = "none";
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		conf@ni169445 {
+		conf-ni169445 {
 			description = "NI 169445 Linux Kernel";
-			kernel = "kernel@0";
-			fdt = "fdt@ni169445";
+			kernel = "kernel";
+			fdt = "fdt-ni169445";
 		};
 	};
 };
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index 1a08438fd893..3e254676540f 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -6,7 +6,7 @@
 	#address-cells = <ADDR_CELLS>;
 
 	images {
-		kernel@0 {
+		kernel {
 			description = KERNEL_NAME;
 			data = /incbin/(VMLINUX_BINARY);
 			type = "kernel";
@@ -15,18 +15,18 @@
 			compression = VMLINUX_COMPRESSION;
 			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
 			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
-			hash@0 {
+			hash {
 				algo = "sha1";
 			};
 		};
 	};
 
 	configurations {
-		default = "conf@default";
+		default = "conf-default";
 
-		conf@default {
+		conf-default {
 			description = "Generic Linux kernel";
-			kernel = "kernel@0";
+			kernel = "kernel";
 		};
 	};
 };
-- 
2.30.2

[PATCH 4.14 70/88] arm64: perf: Disable PMU while processing counter overflows

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

commit 3cce50dfec4a5b0414c974190940f47dd32c6dee upstream.

The arm64 PMU updates the event counters and reprograms the
counters in the overflow IRQ handler without disabling the
PMU. This could potentially cause skews in for group counters,
where the overflowed counters may potentially loose some event
counts, while they are reprogrammed. To prevent this, disable
the PMU while we process the counter overflows and enable it
right back when we are done.

This patch also moves the PMU stop/start routines to avoid a
forward declaration.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Aman Priyadarshi <apeureka@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/perf_event.c | 50 +++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 53df84b2a07f..4ee1228d29eb 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -670,6 +670,28 @@ static void armv8pmu_disable_event(struct perf_event *event)
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
+static void armv8pmu_start(struct arm_pmu *cpu_pmu)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	/* Enable all counters */
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E);
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void armv8pmu_stop(struct arm_pmu *cpu_pmu)
+{
+	unsigned long flags;
+	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
+
+	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	/* Disable all counters */
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E);
+	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
 static irqreturn_t armv8pmu_handle_irq(int irq_num, void *dev)
 {
 	u32 pmovsr;
@@ -695,6 +717,11 @@ static irqreturn_t armv8pmu_handle_irq(int irq_num, void *dev)
 	 */
 	regs = get_irq_regs();
 
+	/*
+	 * Stop the PMU while processing the counter overflows
+	 * to prevent skews in group events.
+	 */
+	armv8pmu_stop(cpu_pmu);
 	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
@@ -719,6 +746,7 @@ static irqreturn_t armv8pmu_handle_irq(int irq_num, void *dev)
 		if (perf_event_overflow(event, &data, regs))
 			cpu_pmu->disable(event);
 	}
+	armv8pmu_start(cpu_pmu);
 
 	/*
 	 * Handle the pending perf events.
@@ -732,28 +760,6 @@ static irqreturn_t armv8pmu_handle_irq(int irq_num, void *dev)
 	return IRQ_HANDLED;
 }
 
-static void armv8pmu_start(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Enable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv8pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Disable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
 static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
 				  struct perf_event *event)
 {
-- 
2.30.2

[PATCH 4.14 71/88] Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 4d6035f9bf4ea12776322746a216e856dfe46698 ]

Revert commit 4514d991d992 ("PCI: PM: Do not read power state in
pci_enable_device_flags()") that is reported to cause PCI device
initialization issues on some systems.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213481
Link: https://lore.kernel.org/linux-acpi/YNDoGICcg0V8HhpQ@eldamar.lan
Reported-by: Michael <phyre@rogers.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 4514d991d992 ("PCI: PM: Do not read power state in pci_enable_device_flags()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1993e5e28ea7..c847b5554db6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1378,11 +1378,21 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 	int err;
 	int i, bars = 0;
 
-	if (atomic_inc_return(&dev->enable_cnt) > 1) {
-		pci_update_current_state(dev, dev->current_state);
-		return 0;		/* already enabled */
+	/*
+	 * Power state could be unknown at this point, either due to a fresh
+	 * boot or a device removal call.  So get the current power state
+	 * so that things like MSI message writing will behave as expected
+	 * (e.g. if the device really is in D0 at enable time).
+	 */
+	if (dev->pm_cap) {
+		u16 pmcsr;
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
 	}
 
+	if (atomic_inc_return(&dev->enable_cnt) > 1)
+		return 0;		/* already enabled */
+
 	bridge = pci_upstream_bridge(dev);
 	if (bridge)
 		pci_enable_bridge(bridge);
-- 
2.30.2

[PATCH 4.14 72/88] mac80211: remove warning in ieee80211_get_sband()

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 0ee4d55534f82a0624701d0bb9fc2304d4529086 ]

Syzbot reports that it's possible to hit this from userspace,
by trying to add a station before any other connection setup
has been done. Instead of trying to catch this in some other
way simply remove the warning, that will appropriately reject
the call from userspace.

Reported-by: syzbot+7716dbc401d9a437890d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210517164715.f537da276d17.Id05f40ec8761d6a8cc2df87f1aa09c651988a586@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 790c771e8108..0d4f7258b243 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1393,7 +1393,7 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 
-	if (WARN_ON_ONCE(!chanctx_conf)) {
+	if (!chanctx_conf) {
 		rcu_read_unlock();
 		return NULL;
 	}
-- 
2.30.2

[PATCH 4.14 73/88] cfg80211: call cfg80211_leave_ocb when switching away from OCB

[Sasha Levin]

From: Du Cheng <ducheng2@gmail.com>

[ Upstream commit a64b6a25dd9f984ed05fade603a00e2eae787d2f ]

If the userland switches back-and-forth between NL80211_IFTYPE_OCB and
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a
chance where the cleanup cfg80211_leave_ocb() is not called. This leads
to initialization of in-use memory (e.g. init u.ibss while in-use by
u.ocb) due to a shared struct/union within ieee80211_sub_if_data:

struct ieee80211_sub_if_data {
    ...
    union {
        struct ieee80211_if_ap ap;
        struct ieee80211_if_vlan vlan;
        struct ieee80211_if_managed mgd;
        struct ieee80211_if_ibss ibss; // <- shares address
        struct ieee80211_if_mesh mesh;
        struct ieee80211_if_ocb ocb; // <- shares address
        struct ieee80211_if_mntr mntr;
        struct ieee80211_if_nan nan;
    } u;
    ...
}

Therefore add handling of otype == NL80211_IFTYPE_OCB, during
cfg80211_change_iface() to perform cleanup when leaving OCB mode.

link to syzkaller bug:
https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5

Reported-by: syzbot+105896fac213f26056f9@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index b3895a8a48ab..bf4dd297a4db 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1041,6 +1041,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 		case NL80211_IFTYPE_MESH_POINT:
 			/* mesh should be handled? */
 			break;
+		case NL80211_IFTYPE_OCB:
+			cfg80211_leave_ocb(rdev, dev);
+			break;
 		default:
 			break;
 		}
-- 
2.30.2

[PATCH 4.14 74/88] mac80211: drop multicast fragments

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit a9799541ca34652d9996e45f80e8e03144c12949 ]

These are not permitted by the spec, just drop them.

Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6b4fd56800f7..ac2c52709e1c 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2014,17 +2014,15 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
 	sc = le16_to_cpu(hdr->seq_ctrl);
 	frag = sc & IEEE80211_SCTL_FRAG;
 
-	if (is_multicast_ether_addr(hdr->addr1)) {
-		I802_DEBUG_INC(rx->local->dot11MulticastReceivedFrameCount);
-		goto out_no_led;
-	}
-
 	if (rx->sta)
 		cache = &rx->sta->frags;
 
 	if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
 		goto out;
 
+	if (is_multicast_ether_addr(hdr->addr1))
+		return RX_DROP_MONITOR;
+
 	I802_DEBUG_INC(rx->local->rx_handlers_fragments);
 
 	if (skb_linearize(rx->skb))
@@ -2150,7 +2148,6 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
 
  out:
 	ieee80211_led_rx(rx->local);
- out_no_led:
 	if (rx->sta)
 		rx->sta->rx_stats.packets++;
 	return RX_CONTINUE;
-- 
2.30.2

[PATCH 4.14 75/88] ping: Check return value of function 'ping_queue_rcv_skb'

[Sasha Levin]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit 9d44fa3e50cc91691896934d106c86e4027e61ca ]

Function 'ping_queue_rcv_skb' not always return success, which will
also return fail. If not check the wrong return value of it, lead to function
`ping_rcv` return success.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ping.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 186fdf0922d2..aab141c4a389 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -978,6 +978,7 @@ bool ping_rcv(struct sk_buff *skb)
 	struct sock *sk;
 	struct net *net = dev_net(skb->dev);
 	struct icmphdr *icmph = icmp_hdr(skb);
+	bool rc = false;
 
 	/* We assume the packet has already been checked by icmp_rcv */
 
@@ -992,14 +993,15 @@ bool ping_rcv(struct sk_buff *skb)
 		struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
 
 		pr_debug("rcv on socket %p\n", sk);
-		if (skb2)
-			ping_queue_rcv_skb(sk, skb2);
+		if (skb2 && !ping_queue_rcv_skb(sk, skb2))
+			rc = true;
 		sock_put(sk);
-		return true;
 	}
-	pr_debug("no socket, dropping\n");
 
-	return false;
+	if (!rc)
+		pr_debug("no socket, dropping\n");
+
+	return rc;
 }
 EXPORT_SYMBOL_GPL(ping_rcv);
 
-- 
2.30.2

[PATCH 4.14 76/88] inet: annotate date races around sk->sk_txhash

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit b71eaed8c04f72a919a9c44e83e4ee254e69e7f3 ]

UDP sendmsg() path can be lockless, it is possible for another
thread to re-connect an change sk->sk_txhash under us.

There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE()
pair to document the race.

BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w

write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1:
 sk_set_txhash include/net/sock.h:1937 [inline]
 __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75
 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189
 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580
 __sys_connect_file net/socket.c:1837 [inline]
 __sys_connect+0x245/0x280 net/socket.c:1854
 __do_sys_connect net/socket.c:1864 [inline]
 __se_sys_connect net/socket.c:1861 [inline]
 __x64_sys_connect+0x3d/0x50 net/socket.c:1861
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0:
 skb_set_hash_from_sk include/net/sock.h:2211 [inline]
 skb_set_owner_w+0x118/0x220 net/core/sock.c:2101
 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359
 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373
 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621
 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983
 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xbca3c43d -> 0xfdb309e0

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 55d16db84ea4..70fe85bee4e5 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1744,7 +1744,8 @@ static inline u32 net_tx_rndhash(void)
 
 static inline void sk_set_txhash(struct sock *sk)
 {
-	sk->sk_txhash = net_tx_rndhash();
+	/* This pairs with READ_ONCE() in skb_set_hash_from_sk() */
+	WRITE_ONCE(sk->sk_txhash, net_tx_rndhash());
 }
 
 static inline void sk_rethink_txhash(struct sock *sk)
@@ -2018,9 +2019,12 @@ static inline void sock_poll_wait(struct file *filp,
 
 static inline void skb_set_hash_from_sk(struct sk_buff *skb, struct sock *sk)
 {
-	if (sk->sk_txhash) {
+	/* This pairs with WRITE_ONCE() in sk_set_txhash() */
+	u32 txhash = READ_ONCE(sk->sk_txhash);
+
+	if (txhash) {
 		skb->l4_hash = 1;
-		skb->hash = sk->sk_txhash;
+		skb->hash = txhash;
 	}
 }
 
-- 
2.30.2

[PATCH 4.14 77/88] net: caif: fix memory leak in ldisc_open

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 58af3d3d54e87bfc1f936e16c04ade3369d34011 ]

Syzbot reported memory leak in tty_init_dev().
The problem was in unputted tty in ldisc_open()

static int ldisc_open(struct tty_struct *tty)
{
...
	ser->tty = tty_kref_get(tty);
...
	result = register_netdevice(dev);
	if (result) {
		rtnl_unlock();
		free_netdev(dev);
		return -ENODEV;
	}
...
}

Ser pointer is netdev private_data, so after free_netdev()
this pointer goes away with unputted tty reference. So, fix
it by adding tty_kref_put() before freeing netdev.

Reported-and-tested-by: syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/caif/caif_serial.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index ce76ed50a1a2..1516d621e040 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -360,6 +360,7 @@ static int ldisc_open(struct tty_struct *tty)
 	rtnl_lock();
 	result = register_netdevice(dev);
 	if (result) {
+		tty_kref_put(tty);
 		rtnl_unlock();
 		free_netdev(dev);
 		return -ENODEV;
-- 
2.30.2

[PATCH 4.14 78/88] net/packet: annotate accesses to po->bind

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit c7d2ef5dd4b03ed0ee1d13bc0c55f9cf62d49bd6 ]

tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show()
can read po->num without holding a lock. This means other threads
can change po->num at the same time.

KCSAN complained about this known fact [1]
Add READ_ONCE()/WRITE_ONCE() to address the issue.

[1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg

write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0:
 packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181
 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255
 __sys_bind+0x200/0x290 net/socket.c:1637
 __do_sys_bind net/socket.c:1648 [inline]
 __se_sys_bind net/socket.c:1646 [inline]
 __x64_sys_bind+0x3d/0x50 net/socket.c:1646
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1:
 packet_snd net/packet/af_packet.c:2899 [inline]
 packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmsg+0x1ed/0x270 net/socket.c:2433
 __do_sys_sendmsg net/socket.c:2442 [inline]
 __se_sys_sendmsg net/socket.c:2440 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x1200

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b62ec43ed54f..6f55942619d4 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2694,7 +2694,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
 	}
 	if (likely(saddr == NULL)) {
 		dev	= packet_cached_dev_get(po);
-		proto	= po->num;
+		proto	= READ_ONCE(po->num);
 	} else {
 		err = -EINVAL;
 		if (msg->msg_namelen < sizeof(struct sockaddr_ll))
@@ -2907,7 +2907,7 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len)
 
 	if (likely(saddr == NULL)) {
 		dev	= packet_cached_dev_get(po);
-		proto	= po->num;
+		proto	= READ_ONCE(po->num);
 	} else {
 		err = -EINVAL;
 		if (msg->msg_namelen < sizeof(struct sockaddr_ll))
@@ -3177,7 +3177,7 @@ static int packet_do_bind(struct sock *sk, const char *name, int ifindex,
 			/* prevents packet_notifier() from calling
 			 * register_prot_hook()
 			 */
-			po->num = 0;
+			WRITE_ONCE(po->num, 0);
 			__unregister_prot_hook(sk, true);
 			rcu_read_lock();
 			dev_curr = po->prot_hook.dev;
@@ -3187,7 +3187,7 @@ static int packet_do_bind(struct sock *sk, const char *name, int ifindex,
 		}
 
 		BUG_ON(po->running);
-		po->num = proto;
+		WRITE_ONCE(po->num, proto);
 		po->prot_hook.type = proto;
 
 		if (unlikely(unlisted)) {
@@ -3534,7 +3534,7 @@ static int packet_getname(struct socket *sock, struct sockaddr *uaddr,
 
 	sll->sll_family = AF_PACKET;
 	sll->sll_ifindex = po->ifindex;
-	sll->sll_protocol = po->num;
+	sll->sll_protocol = READ_ONCE(po->num);
 	sll->sll_pkttype = 0;
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
@@ -4429,7 +4429,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
 	was_running = po->running;
 	num = po->num;
 	if (was_running) {
-		po->num = 0;
+		WRITE_ONCE(po->num, 0);
 		__unregister_prot_hook(sk, false);
 	}
 	spin_unlock(&po->bind_lock);
@@ -4464,7 +4464,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u,
 
 	spin_lock(&po->bind_lock);
 	if (was_running) {
-		po->num = num;
+		WRITE_ONCE(po->num, num);
 		register_prot_hook(sk);
 	}
 	spin_unlock(&po->bind_lock);
@@ -4635,7 +4635,7 @@ static int packet_seq_show(struct seq_file *seq, void *v)
 			   s,
 			   refcount_read(&s->sk_refcnt),
 			   s->sk_type,
-			   ntohs(po->num),
+			   ntohs(READ_ONCE(po->num)),
 			   po->ifindex,
 			   po->running,
 			   atomic_read(&s->sk_rmem_alloc),
-- 
2.30.2

[PATCH 4.14 79/88] net/packet: annotate accesses to po->ifindex

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e032f7c9c7cefffcfb79b9fc16c53011d2d9d11f ]

Like prior patch, we need to annotate lockless accesses to po->ifindex
For instance, packet_getname() is reading po->ifindex (twice) while
another thread is able to change po->ifindex.

KCSAN reported:

BUG: KCSAN: data-race in packet_do_bind / packet_getname

write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1:
 packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191
 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255
 __sys_bind+0x200/0x290 net/socket.c:1637
 __do_sys_bind net/socket.c:1648 [inline]
 __se_sys_bind net/socket.c:1646 [inline]
 __x64_sys_bind+0x3d/0x50 net/socket.c:1646
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0:
 packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525
 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887
 __do_sys_getsockname net/socket.c:1902 [inline]
 __se_sys_getsockname net/socket.c:1899 [inline]
 __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 6f55942619d4..50ca70b3c175 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3193,11 +3193,11 @@ static int packet_do_bind(struct sock *sk, const char *name, int ifindex,
 		if (unlikely(unlisted)) {
 			dev_put(dev);
 			po->prot_hook.dev = NULL;
-			po->ifindex = -1;
+			WRITE_ONCE(po->ifindex, -1);
 			packet_cached_dev_reset(po);
 		} else {
 			po->prot_hook.dev = dev;
-			po->ifindex = dev ? dev->ifindex : 0;
+			WRITE_ONCE(po->ifindex, dev ? dev->ifindex : 0);
 			packet_cached_dev_assign(po, dev);
 		}
 	}
@@ -3512,7 +3512,7 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
 	uaddr->sa_family = AF_PACKET;
 	memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data));
 	rcu_read_lock();
-	dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
+	dev = dev_get_by_index_rcu(sock_net(sk), READ_ONCE(pkt_sk(sk)->ifindex));
 	if (dev)
 		strlcpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data));
 	rcu_read_unlock();
@@ -3528,16 +3528,18 @@ static int packet_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct sock *sk = sock->sk;
 	struct packet_sock *po = pkt_sk(sk);
 	DECLARE_SOCKADDR(struct sockaddr_ll *, sll, uaddr);
+	int ifindex;
 
 	if (peer)
 		return -EOPNOTSUPP;
 
+	ifindex = READ_ONCE(po->ifindex);
 	sll->sll_family = AF_PACKET;
-	sll->sll_ifindex = po->ifindex;
+	sll->sll_ifindex = ifindex;
 	sll->sll_protocol = READ_ONCE(po->num);
 	sll->sll_pkttype = 0;
 	rcu_read_lock();
-	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
+	dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
 	if (dev) {
 		sll->sll_hatype = dev->type;
 		sll->sll_halen = dev->addr_len;
@@ -4117,7 +4119,7 @@ static int packet_notifier(struct notifier_block *this,
 				}
 				if (msg == NETDEV_UNREGISTER) {
 					packet_cached_dev_reset(po);
-					po->ifindex = -1;
+					WRITE_ONCE(po->ifindex, -1);
 					if (po->prot_hook.dev)
 						dev_put(po->prot_hook.dev);
 					po->prot_hook.dev = NULL;
@@ -4636,7 +4638,7 @@ static int packet_seq_show(struct seq_file *seq, void *v)
 			   refcount_read(&s->sk_refcnt),
 			   s->sk_type,
 			   ntohs(READ_ONCE(po->num)),
-			   po->ifindex,
+			   READ_ONCE(po->ifindex),
 			   po->running,
 			   atomic_read(&s->sk_rmem_alloc),
 			   from_kuid_munged(seq_user_ns(seq), sock_i_uid(s)),
-- 
2.30.2

[PATCH 4.14 80/88] r8152: Avoid memcpy() over-reading of ETH_SS_STATS

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 99718abdc00e86e4f286dd836408e2834886c16e ]

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f9c531a6ce06..8da3c891c9e8 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4640,7 +4640,7 @@ static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 {
 	switch (stringset) {
 	case ETH_SS_STATS:
-		memcpy(data, *rtl8152_gstrings, sizeof(rtl8152_gstrings));
+		memcpy(data, rtl8152_gstrings, sizeof(rtl8152_gstrings));
 		break;
 	}
 }
-- 
2.30.2

[PATCH 4.14 81/88] sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 224004fbb033600715dbd626bceec10bfd9c58bc ]

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index dab1597287b9..36f1019809ea 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2197,7 +2197,7 @@ static void sh_eth_get_strings(struct net_device *ndev, u32 stringset, u8 *data)
 {
 	switch (stringset) {
 	case ETH_SS_STATS:
-		memcpy(data, *sh_eth_gstrings_stats,
+		memcpy(data, sh_eth_gstrings_stats,
 		       sizeof(sh_eth_gstrings_stats));
 		break;
 	}
-- 
2.30.2

[PATCH 4.14 82/88] r8169: Avoid memcpy() over-reading of ETH_SS_STATS

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit da5ac772cfe2a03058b0accfac03fad60c46c24d ]

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 530b8da11960..191531a03415 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -2355,7 +2355,7 @@ static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 {
 	switch(stringset) {
 	case ETH_SS_STATS:
-		memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings));
+		memcpy(data, rtl8169_gstrings, sizeof(rtl8169_gstrings));
 		break;
 	}
 }
-- 
2.30.2

[PATCH 4.14 83/88] net: qed: Fix memcpy() overflow of qed_dcbx_params()

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 1c200f832e14420fa770193f9871f4ce2df00d07 ]

The source (&dcbx_info->operational.params) and dest
(&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params
(560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used
as the memcpy() size.

However it seems that struct qed_dcbx_operational_params
(dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params
(p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte
for "valid").

On the assumption that the size is wrong (rather than the source structure
type), adjust the memcpy() size argument to be 4 bytes smaller and add
a BUILD_BUG_ON() to validate any changes to the structure sizes.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
index d62dccb85539..1ee58a24afe3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
@@ -1259,9 +1259,11 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn,
 		p_hwfn->p_dcbx_info->set.ver_num |= DCBX_CONFIG_VERSION_STATIC;
 
 	p_hwfn->p_dcbx_info->set.enabled = dcbx_info->operational.enabled;
+	BUILD_BUG_ON(sizeof(dcbx_info->operational.params) !=
+		     sizeof(p_hwfn->p_dcbx_info->set.config.params));
 	memcpy(&p_hwfn->p_dcbx_info->set.config.params,
 	       &dcbx_info->operational.params,
-	       sizeof(struct qed_dcbx_admin_params));
+	       sizeof(p_hwfn->p_dcbx_info->set.config.params));
 	p_hwfn->p_dcbx_info->set.config.valid = true;
 
 	memcpy(params, &p_hwfn->p_dcbx_info->set, sizeof(struct qed_dcbx_set));
-- 
2.30.2

[PATCH 4.14 84/88] net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit f6396341194234e9b01cd7538bc2c6ac4501ab14 ]

As documented in Documentation/networking/driver.rst, the ndo_start_xmit
method must not return NETDEV_TX_BUSY under any normal circumstances, and
as recommended, we simply stop the tx queue in advance, when there is a
risk that the next xmit would cause a NETDEV_TX_BUSY return.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 2241f9897092..939de185bc6b 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -736,6 +736,11 @@ temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	/* Kick off the transfer */
 	lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
 
+	if (temac_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
+		netdev_info(ndev, "%s -> netif_stop_queue\n", __func__);
+		netif_stop_queue(ndev);
+	}
+
 	return NETDEV_TX_OK;
 }
 
-- 
2.30.2

[PATCH 4.14 85/88] pinctrl: stm32: fix the reported number of GPIO lines per bank

[Sasha Levin]

From: Fabien Dessenne <fabien.dessenne@foss.st.com>

[ Upstream commit 67e2996f72c71ebe4ac2fcbcf77e54479bb7aa11 ]

Each GPIO bank supports a variable number of lines which is usually 16, but
is less in some cases : this is specified by the last argument of the
"gpio-ranges" bank node property.
Report to the framework, the actual number of lines, so the libgpiod
gpioinfo command lists the actually existing GPIO lines.

Fixes: 1dc9d289154b ("pinctrl: stm32: add possibility to use gpio-ranges to declare bank range")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20210617144629.2557693-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 072bd11074c6..b38e82a868df 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -956,7 +956,7 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
 	struct resource res;
 	struct reset_control *rstc;
 	int npins = STM32_GPIO_PINS_PER_BANK;
-	int bank_nr, err;
+	int bank_nr, err, i = 0;
 
 	rstc = of_reset_control_get_exclusive(np, NULL);
 	if (!IS_ERR(rstc))
@@ -985,9 +985,14 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
 
 	of_property_read_string(np, "st,bank-name", &bank->gpio_chip.label);
 
-	if (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args)) {
+	if (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, i, &args)) {
 		bank_nr = args.args[1] / STM32_GPIO_PINS_PER_BANK;
 		bank->gpio_chip.base = args.args[1];
+
+		npins = args.args[2];
+		while (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
+							 ++i, &args))
+			npins += args.args[2];
 	} else {
 		bank_nr = pctl->nbanks;
 		bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
-- 
2.30.2

[PATCH 4.14 86/88] nilfs2: fix memory leak in nilfs_sysfs_delete_device_group

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 8fd0c1b0647a6bda4067ee0cd61e8395954b6f28 ]

My local syzbot instance hit memory leak in nilfs2.  The problem was in
missing kobject_put() in nilfs_sysfs_delete_device_group().

kobject_del() does not call kobject_cleanup() for passed kobject and it
leads to leaking duped kobject name if kobject_put() was not called.

Fail log:

  BUG: memory leak
  unreferenced object 0xffff8880596171e0 (size 8):
  comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s)
  hex dump (first 8 bytes):
    6c 6f 6f 70 30 00 00 00                          loop0...
  backtrace:
     kstrdup+0x36/0x70 mm/util.c:60
     kstrdup_const+0x53/0x80 mm/util.c:83
     kvasprintf_const+0x108/0x190 lib/kasprintf.c:48
     kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
     kobject_add_varg lib/kobject.c:384 [inline]
     kobject_init_and_add+0xc9/0x160 lib/kobject.c:473
     nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999
     init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637

Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com
Fixes: da7141fb78db ("nilfs2: add /sys/fs/nilfs2/<device> group")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/sysfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index 490303e3d517..e9903bceb2bf 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -1064,6 +1064,7 @@ void nilfs_sysfs_delete_device_group(struct the_nilfs *nilfs)
 	nilfs_sysfs_delete_superblock_group(nilfs);
 	nilfs_sysfs_delete_segctor_group(nilfs);
 	kobject_del(&nilfs->ns_dev_kobj);
+	kobject_put(&nilfs->ns_dev_kobj);
 	kfree(nilfs->ns_dev_subgroups);
 }
 
-- 
2.30.2

[PATCH 4.14 87/88] i2c: robotfuzz-osif: fix control-request directions

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

commit 4ca070ef0dd885616ef294d269a9bf8e3b258e1a upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.

Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously
used the osif_usb_read() helper and set the IN direction bit.

Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Cc: stable@vger.kernel.org      # 3.14
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index 9c0f52b7ff7e..b9b4758c6be7 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -89,7 +89,7 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 			}
 		}
 
-		ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
+		ret = osif_usb_write(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
 		if (ret) {
 			dev_err(&adapter->dev, "failure sending STOP\n");
 			return -EREMOTEIO;
@@ -159,7 +159,7 @@ static int osif_probe(struct usb_interface *interface,
 	 * Set bus frequency. The frequency is:
 	 * 120,000,000 / ( 16 + 2 * div * 4^prescale).
 	 * Using dev = 52, prescale = 0 give 100KHz */
-	ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
+	ret = osif_usb_write(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
 			    NULL, 0);
 	if (ret) {
 		dev_err(&interface->dev, "failure sending bit rate");
-- 
2.30.2

[PATCH 4.14 88/88] Linux 4.14.238-rc1

[Sasha Levin]

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index e2977b8f8e6a..79d42138af06 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
-SUBLEVEL = 237
-EXTRAVERSION =
+SUBLEVEL = 238
+EXTRAVERSION = -rc1
 NAME = Petit Gorille
 
 # *DOCUMENTATION*
-- 
2.30.2

Re: [PATCH 4.14 00/88] 4.14.238-rc1 review

[Naresh Kamboju]

On Mon, 28 Jun 2021 at 20:06, Sasha Levin <sashal@kernel.org> wrote:
>
>
> This is the start of the stable review cycle for the 4.14.238 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 30 Jun 2021 02:36:04 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.237
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.14.238-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.14.y
* git commit: f8f0323505c56f13af223c8b9ad54f2fad125756
* git describe: v4.14.237-88-gf8f0323505c5
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.237-88-gf8f0323505c5

## No regressions (compared to v4.14.237-71-g66c6950a943b)

## No fixes (compared to v4.14.237-71-g66c6950a943b)

## Test result summary
 total: 62567, pass: 49721, fail: 1298, skip: 10514, xfail: 1034,

## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 24 total, 24 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 14 total, 14 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/88] 4.14.238-rc1 review

[Guenter Roeck]

On Mon, Jun 28, 2021 at 10:35:00AM -0400, Sasha Levin wrote:
> 
> This is the start of the stable review cycle for the 4.14.238 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 30 Jun 2021 02:36:04 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 406 pass: 406 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.14 00/88] 4.14.238-rc1 review

[Samuel Zou]

On 2021/6/28 22:35, Sasha Levin wrote:
> 
> This is the start of the stable review cycle for the 4.14.238 release.
> There are 88 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 30 Jun 2021 02:36:04 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
>          https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.237
> or in the git tree and branch at:
>          git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> Thanks,
> Sasha
> 

Tested on x86 for 4.14.238-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.238-rc1
Commit: f8f0323505c56f13af223c8b9ad54f2fad125756
Compiler: gcc version 7.3.0 (GCC)

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8836
passed: 8836
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>