linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Pavel Skripkin <paskripkin@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.4 28/57] net: ethernet: fix potential use-after-free in ec_bhf_remove
Date: Mon, 28 Jun 2021 10:42:27 -0400	[thread overview]
Message-ID: <20210628144256.34524-29-sashal@kernel.org> (raw)
In-Reply-To: <20210628144256.34524-1-sashal@kernel.org>

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 9cca0c2d70149160407bda9a9446ce0c29b6e6c6 ]

static void ec_bhf_remove(struct pci_dev *dev)
{
...
	struct ec_bhf_priv *priv = netdev_priv(net_dev);

	unregister_netdev(net_dev);
	free_netdev(net_dev);

	pci_iounmap(dev, priv->dma_io);
	pci_iounmap(dev, priv->io);
...
}

priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.

Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ec_bhf.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ec_bhf.c b/drivers/net/ethernet/ec_bhf.c
index f7b42483921c..0ade0c6d81ee 100644
--- a/drivers/net/ethernet/ec_bhf.c
+++ b/drivers/net/ethernet/ec_bhf.c
@@ -589,10 +589,12 @@ static void ec_bhf_remove(struct pci_dev *dev)
 	struct ec_bhf_priv *priv = netdev_priv(net_dev);
 
 	unregister_netdev(net_dev);
-	free_netdev(net_dev);
 
 	pci_iounmap(dev, priv->dma_io);
 	pci_iounmap(dev, priv->io);
+
+	free_netdev(net_dev);
+
 	pci_release_regions(dev);
 	pci_clear_master(dev);
 	pci_disable_device(dev);
-- 
2.30.2


  parent reply	other threads:[~2021-06-28 15:28 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-28 14:41 [PATCH 4.4 00/57] 4.4.274-rc1 review Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 01/57] HID: hid-sensor-hub: Return error for hid_set_field() failure Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 02/57] HID: Add BUS_VIRTUAL to hid_connect logging Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 03/57] HID: usbhid: fix info leak in hid_submit_ctrl Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 04/57] ARM: OMAP2+: Fix build warning when mmc_omap is not built Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 05/57] HID: gt683r: add missing MODULE_DEVICE_TABLE Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 06/57] gfs2: Fix use-after-free in gfs2_glock_shrink_scan Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 07/57] scsi: target: core: Fix warning on realtime kernels Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 08/57] ethernet: myri10ge: Fix missing error code in myri10ge_probe() Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 09/57] net: ipconfig: Don't override command-line hostnames or domains Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 10/57] rtnetlink: Fix missing error code in rtnl_bridge_notify() Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 11/57] net/x25: Return the correct errno code Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 12/57] net: " Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 13/57] fib: " Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 14/57] dmaengine: stedma40: add missing iounmap() on error in d40_probe() Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 15/57] net: ipv4: fix memory leak in netlbl_cipsov4_add_std Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 16/57] net: rds: fix memory leak in rds_recvmsg Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 17/57] rtnetlink: Fix regression in bridge VLAN configuration Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 18/57] netfilter: synproxy: Fix out of bounds when parsing TCP options Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 19/57] net: stmmac: dwmac1000: Fix extended MAC address registers definition Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 20/57] qlcnic: Fix an error handling path in 'qlcnic_probe()' Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 21/57] netxen_nic: Fix an error handling path in 'netxen_nic_probe()' Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 22/57] net: cdc_ncm: switch to eth%d interface naming Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 23/57] net: usb: fix possible use-after-free in smsc75xx_bind Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 24/57] net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 25/57] be2net: Fix an error handling path in 'be_probe()' Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 26/57] net: hamradio: fix memory leak in mkiss_close Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 27/57] net: cdc_eem: fix tx fixup skb leak Sasha Levin
2021-06-28 14:42 ` Sasha Levin [this message]
2021-06-28 14:42 ` [PATCH 4.4 29/57] scsi: core: Put .shost_dev in failure path if host state changes to RUNNING Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 30/57] radeon: use memcpy_to/fromio for UVD fw upload Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 31/57] can: bcm: fix infoleak in struct bcm_msg_head Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 32/57] tracing: Do no increment trace_clock_global() by one Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 33/57] PCI: Mark TI C667X to avoid bus reset Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 34/57] PCI: Mark some NVIDIA GPUs " Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 35/57] ARCv2: save ABI registers across signal handling Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 36/57] dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 37/57] net: fec_ptp: add clock rate zero check Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 38/57] can: bcm/raw/isotp: use per module netdevice notifier Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 39/57] tracing: Do not stop recording cmdlines when tracing is off Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 40/57] tracing: Do not stop recording comms if the trace file is being read Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 41/57] x86/fpu: Reset state for all signal restore failures Sasha Levin
2021-07-03 15:22   ` Pavel Machek
2021-06-28 14:42 ` [PATCH 4.4 42/57] inet: use bigger hash table for IP ID generation Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 43/57] ARM: 9081/1: fix gcc-10 thumb2-kernel regression Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 44/57] Makefile: Move -Wno-unused-but-set-variable out of GCC only block Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 45/57] Revert "PCI: PM: Do not read power state in pci_enable_device_flags()" Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 46/57] cfg80211: call cfg80211_leave_ocb when switching away from OCB Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 47/57] mac80211: drop multicast fragments Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 48/57] ping: Check return value of function 'ping_queue_rcv_skb' Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 49/57] inet: annotate date races around sk->sk_txhash Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 50/57] net: caif: fix memory leak in ldisc_open Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 51/57] r8152: Avoid memcpy() over-reading of ETH_SS_STATS Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 52/57] sh_eth: " Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 53/57] r8169: " Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 54/57] net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 55/57] nilfs2: fix memory leak in nilfs_sysfs_delete_device_group Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 56/57] i2c: robotfuzz-osif: fix control-request directions Sasha Levin
2021-06-28 14:42 ` [PATCH 4.4 57/57] Linux 4.4.274-rc1 Sasha Levin
2021-06-29 14:09 ` [PATCH 4.4 00/57] 4.4.274-rc1 review Guenter Roeck
2021-06-29 14:52 ` Naresh Kamboju
2021-06-29 18:18 ` Guenter Roeck
2021-06-29 23:42 ` Guenter Roeck
2021-07-01 10:21 ` Pavel Machek
2021-07-10 14:59 ` Naresh Kamboju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210628144256.34524-29-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paskripkin@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).