linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Guodong Xu <guodong.xu@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH RFT] regulator: hi6421: Fix getting wrong drvdata
Date: Wed, 30 Jun 2021 17:59:59 +0800	[thread overview]
Message-ID: <20210630095959.2411543-1-axel.lin@ingics.com> (raw)

Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable
returns the drvdata of the mfd device rather than the regulator. Fix it.

This was broken while converting to use simplified DT parsing because the
config.dev changed from pdev->dev to pdev->dev.parent for parsing the
parent's of_node.

Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
This is similar to the hi6421v600 regression issue.
 drivers/regulator/hi6421-regulator.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index bff8c515dcde..d144a4bdb76d 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -366,9 +366,8 @@ static struct hi6421_regulator_info
 
 static int hi6421_regulator_enable(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_pdata *pdata;
+	struct hi6421_regulator_pdata *pdata = rdev_get_drvdata(rdev);
 
-	pdata = dev_get_drvdata(rdev->dev.parent);
 	/* hi6421 spec requires regulator enablement must be serialized:
 	 *  - Because when BUCK, LDO switching from off to on, it will have
 	 *    a huge instantaneous current; so you can not turn on two or
@@ -385,9 +384,10 @@ static int hi6421_regulator_enable(struct regulator_dev *rdev)
 
 static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int reg_val;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_IDLE;
@@ -397,9 +397,10 @@ static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 
 static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int reg_val;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_STANDBY;
@@ -410,9 +411,10 @@ static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int new_mode;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
@@ -434,9 +436,10 @@ static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
 	unsigned int new_mode;
 
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
@@ -459,7 +462,9 @@ static unsigned int
 hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 			int input_uV, int output_uV, int load_uA)
 {
-	struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
+	struct hi6421_regulator_info *info;
+
+	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 
 	if (load_uA > info->eco_microamp)
 		return REGULATOR_MODE_NORMAL;
@@ -543,14 +548,13 @@ static int hi6421_regulator_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 	mutex_init(&pdata->lock);
-	platform_set_drvdata(pdev, pdata);
 
 	for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
 		/* assign per-regulator data */
 		info = &hi6421_regulator_info[i];
 
 		config.dev = pdev->dev.parent;
-		config.driver_data = info;
+		config.driver_data = pdata;
 		config.regmap = pmic->regmap;
 
 		rdev = devm_regulator_register(&pdev->dev, &info->desc,
-- 
2.25.1


             reply	other threads:[~2021-06-30 10:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-30  9:59 Axel Lin [this message]
2021-07-12 10:45 ` [PATCH RFT] regulator: hi6421: Fix getting wrong drvdata Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210630095959.2411543-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=guodong.xu@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).