linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Helms <alexander.helms.jy@renesas.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Cc: robh+dt@kernel.org, sboyd@kernel.org, mturquette@baylibre.com,
	geert+renesas@glider.be, alexander.helms.jy@renesas.com,
	david.cater.jc@renesas.com
Subject: [PATCH 1/2] dt-bindings: Add binding for Renesas 8T49N241
Date: Thu,  1 Jul 2021 12:41:34 -0700	[thread overview]
Message-ID: <20210701194135.18847-2-alexander.helms.jy@renesas.com> (raw)
In-Reply-To: <20210701194135.18847-1-alexander.helms.jy@renesas.com>

Renesas 8T49N241 has 4 outputs, 1 integral and 3 fractional dividers.
The 8T49N241 accepts up to two differential or single-ended input clocks
and a fundamental-mode crystal input. The internal PLL can lock to either
of the input reference clocks or to the crystal to behave as a frequency
synthesizer.

Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com>
---
 .../bindings/clock/renesas,8t49n241.yaml      | 183 ++++++++++++++++++
 MAINTAINERS                                   |   6 +
 2 files changed, 189 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml

diff --git a/Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml b/Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml
new file mode 100644
index 000000000..d817ec46d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,8t49n24x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Renesas 8T49N241 Universal Frequency Translator
+
+description: |
+  The 8T49N241 has one fractional-feedback PLL that can be used as a
+  jitter attenuator and frequency translator. It is equipped with one
+  integer and three fractional output dividers, allowing the generation
+  of up to four different output frequencies, ranging from 8kHz to 1GHz.
+  These frequencies are completely independent of each other, the input
+  reference frequencies and the crystal reference frequency. The device
+  places virtually no constraints on input to output frequency conversion,
+  supporting all FEC rates, including the new revision of ITU-T
+  Recommendation G.709 (2009), most with 0ppm conversion error.
+  The outputs may select among LVPECL, LVDS, HCSL or LVCMOS output levels.
+
+  The driver can read a full register map from the DT, and will use that
+  register map to initialize the attached part (via I2C) when the system
+  boots. Any configuration not supported by the common clock framework
+  must be done via the full register map, including optimized settings.
+
+  The 8T49N241 accepts up to two differential or single-ended input clocks
+  and a fundamental-mode crystal input. The internal PLL can lock to either
+  of the input reference clocks or just to the crystal to behave as a
+  frequency synthesizer. The PLL can use the second input for redundant
+  backup of the primary input reference, but in this case, both input clock
+  references must be related in frequency.
+
+  All outputs are currently assumed to be LVDS, unless overridden in the
+  full register map in the DT.
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+  - David Cater <david.cater.jc@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - 8t49n241
+
+  reg:
+    description: I2C device address
+    enum: [ 0x7c, 0x6c, 0x7d, 0x6d, 0x7e, 0x6e, 0x7f, 0x6f ]
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    description: Name of the input clock
+    minItems: 1
+    maxItems: 3
+    items:
+      enum: [ input-xtal, input-clk0, input-clk1 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference clock */
+    input_clk0: input_clk0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        renesas8t49n241_1: clock-generator@6c {
+            compatible = "renesas,8t49n241";
+            reg = <0x6c>;
+            #clock-cells = <1>;
+
+            clocks = <&input_clk0>;
+            clock-names = "input-clk0";
+        };
+    };
+
+    /* Consumer referencing the 8T49N241 Q1 */
+    consumer {
+        /* ... */
+        clocks = <&renesas8t49n241_1 1>;
+        /* ... */
+    };
+  - |
+    /* 40MHz crystal */
+    input_xtal: input_xtal {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <40000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        renesas8t49n241_2: clock-generator@6c {
+            compatible = "renesas,8t49n241";
+            reg = <0x6c>;
+            #clock-cells = <1>;
+
+            clocks = <&input_xtal>;
+            clock-names = "input-xtal";
+
+            settings=[
+                09 50 00 60 67 C5 6C FF 03 00 30 00 00 01 00 00
+                01 07 00 00 07 00 00 77 6D 06 00 00 00 00 00 FF
+                FF FF FF 00 3F 00 2A 00 16 33 33 00 01 00 00 D0
+                00 00 00 00 00 00 00 00 00 04 00 00 00 02 00 00
+                00 00 00 00 00 00 00 17 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 D7 0A 2B 20 00 00 00 0B
+                00 00 00 00 00 00 00 00 00 00 27 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                C3 00 08 01 00 00 00 00 00 00 00 00 00 30 00 00
+                00 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                00 00 00 00 85 00 00 9C 01 D4 02 71 07 00 00 00
+                00 83 00 10 02 08 8C
+            ];
+        };
+    };
+
+    /* Consumer referencing the 8T49N241 Q1 */
+    consumer {
+        /* ... */
+        clocks = <&renesas8t49n241_2 1>;
+        /* ... */
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cce91cd5..882d79ead 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15575,6 +15575,12 @@ F:	include/linux/rpmsg/
 F:	include/uapi/linux/rpmsg.h
 F:	samples/rpmsg/
 
+RENESAS 8T49N24X DRIVER
+M:	Alex Helms <alexander.helms.jy@renesas.com>
+M:	David Cater <david.cater.jc@renesas.com>
+S:	Odd Fixes
+F:	Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml
+
 RENESAS CLOCK DRIVERS
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 L:	linux-renesas-soc@vger.kernel.org
-- 
2.30.2


  reply	other threads:[~2021-07-01 19:41 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-01 19:41 [PATCH 0/2] Renesas 8T49N241 device driver Alex Helms
2021-07-01 19:41 ` Alex Helms [this message]
2021-07-01 19:41 ` [PATCH 2/2] clk: Add ccf driver for Renesas 8T49N241 Alex Helms
2021-07-01 22:21   ` kernel test robot
2021-07-01 23:22     ` [PATCH v2 0/2] Renesas 8T49N241 device driver Alex Helms
2021-07-01 23:22       ` [PATCH v2 1/2] dt-bindings: Add binding for Renesas 8T49N241 Alex Helms
2021-07-02  6:52         ` Biju Das
2021-07-02 21:51           ` Alexander Helms
2021-07-03 10:15             ` Biju Das
2021-07-02 13:28         ` Rob Herring
2021-07-01 23:22       ` [PATCH v2 2/2] clk: Add ccf driver " Alex Helms
2021-07-02  0:57       ` [PATCH v2 0/2] Renesas 8T49N241 device driver Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210701194135.18847-2-alexander.helms.jy@renesas.com \
    --to=alexander.helms.jy@renesas.com \
    --cc=david.cater.jc@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).