* [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2
@ 2021-07-02 19:49 Michael Walle
2021-07-23 2:40 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Michael Walle @ 2021-07-02 19:49 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
The PHY configuration for the variant 2 is still missing the flag for
in-band signalling between PHY and MAC. Both sides - MAC and PHY - have
to match the setting. For now, Linux only supports setting the MAC side
and thus it has to match the setting the bootloader is configuring.
Enable in-band signalling to make ethernet work.
Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2")
Signed-off-by: Michael Walle <michael@walle.cc>
---
What make things worse and why this might slipped through is that the
setting in the PHY is persistent even after a soft reset of the PHY.
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index dd764b720fb0..f6a79c8080d1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -54,6 +54,7 @@
&mscc_felix_port0 {
label = "swp0";
+ managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
status = "okay";
@@ -61,6 +62,7 @@
&mscc_felix_port1 {
label = "swp1";
+ managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
status = "okay";
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2
2021-07-02 19:49 [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2 Michael Walle
@ 2021-07-23 2:40 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2021-07-23 2:40 UTC (permalink / raw)
To: Michael Walle
Cc: linux-arm-kernel, devicetree, linux-kernel, Li Yang, Rob Herring
On Fri, Jul 02, 2021 at 09:49:14PM +0200, Michael Walle wrote:
> The PHY configuration for the variant 2 is still missing the flag for
> in-band signalling between PHY and MAC. Both sides - MAC and PHY - have
> to match the setting. For now, Linux only supports setting the MAC side
> and thus it has to match the setting the bootloader is configuring.
> Enable in-band signalling to make ethernet work.
>
> Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2")
> Signed-off-by: Michael Walle <michael@walle.cc>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-23 2:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-02 19:49 [PATCH] arm64: dts: ls1028: sl28: fix networking for variant 2 Michael Walle
2021-07-23 2:40 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).