[PATCH AUTOSEL 5.10 01/70] spi: Make of_register_spi_device also set the fwnode

[PATCH AUTOSEL 5.10 01/70] spi: Make of_register_spi_device also set the fwnode

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 0e793ba77c18382f08e440260fe72bc6fce2a3cb ]

Currently, the SPI core doesn't set the struct device fwnode pointer
when it creates a new SPI device. This means when the device is
registered the fwnode is NULL and the check in device_add which sets
the fwnode->dev pointer is skipped. This wasn't previously an issue,
however these two patches:

commit 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable
fw_devlink=on by default")
commit ced2af419528 ("gpiolib: Don't probe gpio_device if it's not the
primary device")

Added some code to the GPIO core which relies on using that
fwnode->dev pointer to determine if a driver is bound to the fwnode
and if not bind a stub GPIO driver. This means the GPIO providers
behind SPI will get both the expected driver and this stub driver
causing the stub driver to fail if it attempts to request any pin
configuration. For example on my system:

madera-pinctrl madera-pinctrl: pin gpio5 already requested by madera-pinctrl; cannot claim for gpiochip3
madera-pinctrl madera-pinctrl: pin-4 (gpiochip3) status -22
madera-pinctrl madera-pinctrl: could not request pin 4 (gpio5) from group aif1  on device madera-pinctrl
gpio_stub_drv gpiochip3: Error applying setting, reverse things back
gpio_stub_drv: probe of gpiochip3 failed with error -22

The firmware node on the device created by the GPIO framework is set
through the of_node pointer hence things generally actually work,
however that fwnode->dev is never set, as the check was skipped at
device_add time. This fix appears to match how the I2C subsystem
handles the same situation.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210421101402.8468-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 0cf67de741e7..bd8b1f79dce2 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2050,6 +2050,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
 	/* Store a pointer to the node in the device structure */
 	of_node_get(nc);
 	spi->dev.of_node = nc;
+	spi->dev.fwnode = of_fwnode_handle(nc);
 
 	/* Register the new device */
 	rc = spi_add_device(spi);
-- 
2.30.2

[PATCH AUTOSEL 5.10 02/70] Add a reference to ucounts for each cred

[Sasha Levin]

From: Alexey Gladkov <legion@kernel.org>

[ Upstream commit 905ae01c4ae2ae3df05bb141801b1db4b7d83c61 ]

For RLIMIT_NPROC and some other rlimits the user_struct that holds the
global limit is kept alive for the lifetime of a process by keeping it
in struct cred. Adding a pointer to ucounts in the struct cred will
allow to track RLIMIT_NPROC not only for user in the system, but for
user in the user_namespace.

Updating ucounts may require memory allocation which may fail. So, we
cannot change cred.ucounts in the commit_creds() because this function
cannot fail and it should always return 0. For this reason, we modify
cred.ucounts before calling the commit_creds().

Changelog

v6:
* Fix null-ptr-deref in is_ucounts_overlimit() detected by trinity. This
  error was caused by the fact that cred_alloc_blank() left the ucounts
  pointer empty.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/b37aaef28d8b9b0d757e07ba6dd27281bbe39259.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/exec.c                      |  4 ++++
 include/linux/cred.h           |  2 ++
 include/linux/user_namespace.h |  4 ++++
 kernel/cred.c                  | 40 ++++++++++++++++++++++++++++++++++
 kernel/fork.c                  |  6 +++++
 kernel/sys.c                   | 12 ++++++++++
 kernel/ucount.c                | 40 +++++++++++++++++++++++++++++++---
 kernel/user_namespace.c        |  3 +++
 8 files changed, 108 insertions(+), 3 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index ca89e0e3ef10..c7a4ef8df305 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1347,6 +1347,10 @@ int begin_new_exec(struct linux_binprm * bprm)
 	WRITE_ONCE(me->self_exec_id, me->self_exec_id + 1);
 	flush_signal_handlers(me, 0);
 
+	retval = set_cred_ucounts(bprm->cred);
+	if (retval < 0)
+		goto out_unlock;
+
 	/*
 	 * install the new credentials for this executable
 	 */
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 18639c069263..ad160e5fe5c6 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -144,6 +144,7 @@ struct cred {
 #endif
 	struct user_struct *user;	/* real user ID subscription */
 	struct user_namespace *user_ns; /* user_ns the caps and keyrings are relative to. */
+	struct ucounts *ucounts;
 	struct group_info *group_info;	/* supplementary groups for euid/fsgid */
 	/* RCU deletion */
 	union {
@@ -170,6 +171,7 @@ extern int set_security_override_from_ctx(struct cred *, const char *);
 extern int set_create_files_as(struct cred *, struct inode *);
 extern int cred_fscmp(const struct cred *, const struct cred *);
 extern void __init cred_init(void);
+extern int set_cred_ucounts(struct cred *);
 
 /*
  * check for validity of credentials
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index 7616c7bf4b24..e1bd560da1cd 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -101,11 +101,15 @@ struct ucounts {
 };
 
 extern struct user_namespace init_user_ns;
+extern struct ucounts init_ucounts;
 
 bool setup_userns_sysctls(struct user_namespace *ns);
 void retire_userns_sysctls(struct user_namespace *ns);
 struct ucounts *inc_ucount(struct user_namespace *ns, kuid_t uid, enum ucount_type type);
 void dec_ucount(struct ucounts *ucounts, enum ucount_type type);
+struct ucounts *alloc_ucounts(struct user_namespace *ns, kuid_t uid);
+struct ucounts *get_ucounts(struct ucounts *ucounts);
+void put_ucounts(struct ucounts *ucounts);
 
 #ifdef CONFIG_USER_NS
 
diff --git a/kernel/cred.c b/kernel/cred.c
index 421b1149c651..58a8a9e24347 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -60,6 +60,7 @@ struct cred init_cred = {
 	.user			= INIT_USER,
 	.user_ns		= &init_user_ns,
 	.group_info		= &init_groups,
+	.ucounts		= &init_ucounts,
 };
 
 static inline void set_cred_subscribers(struct cred *cred, int n)
@@ -119,6 +120,8 @@ static void put_cred_rcu(struct rcu_head *rcu)
 	if (cred->group_info)
 		put_group_info(cred->group_info);
 	free_uid(cred->user);
+	if (cred->ucounts)
+		put_ucounts(cred->ucounts);
 	put_user_ns(cred->user_ns);
 	kmem_cache_free(cred_jar, cred);
 }
@@ -222,6 +225,7 @@ struct cred *cred_alloc_blank(void)
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	new->magic = CRED_MAGIC;
 #endif
+	new->ucounts = get_ucounts(&init_ucounts);
 
 	if (security_cred_alloc_blank(new, GFP_KERNEL_ACCOUNT) < 0)
 		goto error;
@@ -284,6 +288,11 @@ struct cred *prepare_creds(void)
 
 	if (security_prepare_creds(new, old, GFP_KERNEL_ACCOUNT) < 0)
 		goto error;
+
+	new->ucounts = get_ucounts(new->ucounts);
+	if (!new->ucounts)
+		goto error;
+
 	validate_creds(new);
 	return new;
 
@@ -363,6 +372,8 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags)
 		ret = create_user_ns(new);
 		if (ret < 0)
 			goto error_put;
+		if (set_cred_ucounts(new) < 0)
+			goto error_put;
 	}
 
 #ifdef CONFIG_KEYS
@@ -653,6 +664,31 @@ int cred_fscmp(const struct cred *a, const struct cred *b)
 }
 EXPORT_SYMBOL(cred_fscmp);
 
+int set_cred_ucounts(struct cred *new)
+{
+	struct task_struct *task = current;
+	const struct cred *old = task->real_cred;
+	struct ucounts *old_ucounts = new->ucounts;
+
+	if (new->user == old->user && new->user_ns == old->user_ns)
+		return 0;
+
+	/*
+	 * This optimization is needed because alloc_ucounts() uses locks
+	 * for table lookups.
+	 */
+	if (old_ucounts && old_ucounts->ns == new->user_ns && uid_eq(old_ucounts->uid, new->euid))
+		return 0;
+
+	if (!(new->ucounts = alloc_ucounts(new->user_ns, new->euid)))
+		return -EAGAIN;
+
+	if (old_ucounts)
+		put_ucounts(old_ucounts);
+
+	return 0;
+}
+
 /*
  * initialise the credentials stuff
  */
@@ -719,6 +755,10 @@ struct cred *prepare_kernel_cred(struct task_struct *daemon)
 	if (security_prepare_creds(new, old, GFP_KERNEL_ACCOUNT) < 0)
 		goto error;
 
+	new->ucounts = get_ucounts(new->ucounts);
+	if (!new->ucounts)
+		goto error;
+
 	put_cred(old);
 	validate_creds(new);
 	return new;
diff --git a/kernel/fork.c b/kernel/fork.c
index 7c044d377926..281addb694df 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2960,6 +2960,12 @@ int ksys_unshare(unsigned long unshare_flags)
 	if (err)
 		goto bad_unshare_cleanup_cred;
 
+	if (new_cred) {
+		err = set_cred_ucounts(new_cred);
+		if (err)
+			goto bad_unshare_cleanup_cred;
+	}
+
 	if (new_fs || new_fd || do_sysvsem || new_cred || new_nsproxy) {
 		if (do_sysvsem) {
 			/*
diff --git a/kernel/sys.c b/kernel/sys.c
index a730c03ee607..0670e824e019 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -552,6 +552,10 @@ long __sys_setreuid(uid_t ruid, uid_t euid)
 	if (retval < 0)
 		goto error;
 
+	retval = set_cred_ucounts(new);
+	if (retval < 0)
+		goto error;
+
 	return commit_creds(new);
 
 error:
@@ -610,6 +614,10 @@ long __sys_setuid(uid_t uid)
 	if (retval < 0)
 		goto error;
 
+	retval = set_cred_ucounts(new);
+	if (retval < 0)
+		goto error;
+
 	return commit_creds(new);
 
 error:
@@ -685,6 +693,10 @@ long __sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
 	if (retval < 0)
 		goto error;
 
+	retval = set_cred_ucounts(new);
+	if (retval < 0)
+		goto error;
+
 	return commit_creds(new);
 
 error:
diff --git a/kernel/ucount.c b/kernel/ucount.c
index 11b1596e2542..9894795043c4 100644
--- a/kernel/ucount.c
+++ b/kernel/ucount.c
@@ -8,6 +8,12 @@
 #include <linux/kmemleak.h>
 #include <linux/user_namespace.h>
 
+struct ucounts init_ucounts = {
+	.ns    = &init_user_ns,
+	.uid   = GLOBAL_ROOT_UID,
+	.count = 1,
+};
+
 #define UCOUNTS_HASHTABLE_BITS 10
 static struct hlist_head ucounts_hashtable[(1 << UCOUNTS_HASHTABLE_BITS)];
 static DEFINE_SPINLOCK(ucounts_lock);
@@ -125,7 +131,15 @@ static struct ucounts *find_ucounts(struct user_namespace *ns, kuid_t uid, struc
 	return NULL;
 }
 
-static struct ucounts *get_ucounts(struct user_namespace *ns, kuid_t uid)
+static void hlist_add_ucounts(struct ucounts *ucounts)
+{
+	struct hlist_head *hashent = ucounts_hashentry(ucounts->ns, ucounts->uid);
+	spin_lock_irq(&ucounts_lock);
+	hlist_add_head(&ucounts->node, hashent);
+	spin_unlock_irq(&ucounts_lock);
+}
+
+struct ucounts *alloc_ucounts(struct user_namespace *ns, kuid_t uid)
 {
 	struct hlist_head *hashent = ucounts_hashentry(ns, uid);
 	struct ucounts *ucounts, *new;
@@ -160,7 +174,26 @@ static struct ucounts *get_ucounts(struct user_namespace *ns, kuid_t uid)
 	return ucounts;
 }
 
-static void put_ucounts(struct ucounts *ucounts)
+struct ucounts *get_ucounts(struct ucounts *ucounts)
+{
+	unsigned long flags;
+
+	if (!ucounts)
+		return NULL;
+
+	spin_lock_irqsave(&ucounts_lock, flags);
+	if (ucounts->count == INT_MAX) {
+		WARN_ONCE(1, "ucounts: counter has reached its maximum value");
+		ucounts = NULL;
+	} else {
+		ucounts->count += 1;
+	}
+	spin_unlock_irqrestore(&ucounts_lock, flags);
+
+	return ucounts;
+}
+
+void put_ucounts(struct ucounts *ucounts)
 {
 	unsigned long flags;
 
@@ -194,7 +227,7 @@ struct ucounts *inc_ucount(struct user_namespace *ns, kuid_t uid,
 {
 	struct ucounts *ucounts, *iter, *bad;
 	struct user_namespace *tns;
-	ucounts = get_ucounts(ns, uid);
+	ucounts = alloc_ucounts(ns, uid);
 	for (iter = ucounts; iter; iter = tns->ucounts) {
 		int max;
 		tns = iter->ns;
@@ -237,6 +270,7 @@ static __init int user_namespace_sysctl_init(void)
 	BUG_ON(!user_header);
 	BUG_ON(!setup_userns_sysctls(&init_user_ns));
 #endif
+	hlist_add_ucounts(&init_ucounts);
 	return 0;
 }
 subsys_initcall(user_namespace_sysctl_init);
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index ce396ea4de60..8206a13c81eb 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -1340,6 +1340,9 @@ static int userns_install(struct nsset *nsset, struct ns_common *ns)
 	put_user_ns(cred->user_ns);
 	set_cred_user_ns(cred, get_user_ns(user_ns));
 
+	if (set_cred_ucounts(cred) < 0)
+		return -EINVAL;
+
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 03/70] staging: media: rkvdec: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit e90812c47b958407b54d05780dc483fdc1b57a93 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkvdec/rkvdec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index 1263991de76f..b630e161d4ce 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -691,7 +691,7 @@ static void rkvdec_device_run(void *priv)
 	if (WARN_ON(!desc))
 		return;
 
-	ret = pm_runtime_get_sync(rkvdec->dev);
+	ret = pm_runtime_resume_and_get(rkvdec->dev);
 	if (ret < 0) {
 		rkvdec_job_finish_no_pm(ctx, VB2_BUF_STATE_ERROR);
 		return;
-- 
2.30.2

[PATCH AUTOSEL 5.10 04/70] media: marvel-ccic: fix some issues when getting pm_runtime

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit e7c617cab7a522fba5b20f9033ee98565b6f3546 ]

Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().

While here, ensure that the error condition will be checked
during clock enable an media open() calls.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 34266fba824f..e56c5e56e824 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -918,6 +918,7 @@ static int mclk_enable(struct clk_hw *hw)
 	struct mcam_camera *cam = container_of(hw, struct mcam_camera, mclk_hw);
 	int mclk_src;
 	int mclk_div;
+	int ret;
 
 	/*
 	 * Clock the sensor appropriately.  Controller clock should
@@ -931,7 +932,9 @@ static int mclk_enable(struct clk_hw *hw)
 		mclk_div = 2;
 	}
 
-	pm_runtime_get_sync(cam->dev);
+	ret = pm_runtime_resume_and_get(cam->dev);
+	if (ret < 0)
+		return ret;
 	clk_enable(cam->clk[0]);
 	mcam_reg_write(cam, REG_CLKCTRL, (mclk_src << 29) | mclk_div);
 	mcam_ctlr_power_up(cam);
@@ -1611,7 +1614,9 @@ static int mcam_v4l_open(struct file *filp)
 		ret = sensor_call(cam, core, s_power, 1);
 		if (ret)
 			goto out;
-		pm_runtime_get_sync(cam->dev);
+		ret = pm_runtime_resume_and_get(cam->dev);
+		if (ret < 0)
+			goto out;
 		__mcam_cam_reset(cam);
 		mcam_set_config_needed(cam, 1);
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.10 05/70] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit d07bb9702cf5f5ccf3fb661e6cab54bbc33cd23f ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
index 724c7333b6e5..45fc741c5541 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
@@ -394,12 +394,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct mtk_mdp_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
 	if (ret < 0)
-		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
+		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
 			    ctx->id, ret);
 
-	return 0;
+	return ret;
 }
 
 static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,
-- 
2.30.2

[PATCH AUTOSEL 5.10 06/70] media: s5p: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit fdc34e82c0f968ac4c157bd3d8c299ebc24c9c63 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/platform/s5p/s5p_cec.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/cec/platform/s5p/s5p_cec.c b/drivers/media/cec/platform/s5p/s5p_cec.c
index 2a3e7ffefe0a..2250c1cbc64e 100644
--- a/drivers/media/cec/platform/s5p/s5p_cec.c
+++ b/drivers/media/cec/platform/s5p/s5p_cec.c
@@ -35,10 +35,13 @@ MODULE_PARM_DESC(debug, "debug level (0-2)");
 
 static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable)
 {
+	int ret;
 	struct s5p_cec_dev *cec = cec_get_drvdata(adap);
 
 	if (enable) {
-		pm_runtime_get_sync(cec->dev);
+		ret = pm_runtime_resume_and_get(cec->dev);
+		if (ret < 0)
+			return ret;
 
 		s5p_cec_reset(cec);
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 07/70] media: am437x: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit c41e02493334985cca1a22efd5ca962ce3abb061 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/am437x/am437x-vpfe.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index 0fb9f9ba1219..31cee69adbe1 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -1021,7 +1021,9 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe)
 	if (ret)
 		return ret;
 
-	pm_runtime_get_sync(vpfe->pdev);
+	ret = pm_runtime_resume_and_get(vpfe->pdev);
+	if (ret < 0)
+		return ret;
 
 	vpfe_config_enable(&vpfe->ccdc, 1);
 
@@ -2443,7 +2445,11 @@ static int vpfe_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	/* for now just enable it here instead of waiting for the open */
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0) {
+		vpfe_err(vpfe, "Unable to resume device.\n");
+		goto probe_out_v4l2_unregister;
+	}
 
 	vpfe_ccdc_config_defaults(ccdc);
 
@@ -2530,6 +2536,11 @@ static int vpfe_suspend(struct device *dev)
 
 	/* only do full suspend if streaming has started */
 	if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
+		/*
+		 * ignore RPM resume errors here, as it is already too late.
+		 * A check like that should happen earlier, either at
+		 * open() or just before start streaming.
+		 */
 		pm_runtime_get_sync(dev);
 		vpfe_config_enable(ccdc, 1);
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 08/70] media: sh_vou: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 6e8b1526db164c9d4b9dacfb9bc48e365d7c4860 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at open time.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sh_vou.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c
index b22dc1d72527..7d30e0c9447e 100644
--- a/drivers/media/platform/sh_vou.c
+++ b/drivers/media/platform/sh_vou.c
@@ -1133,7 +1133,11 @@ static int sh_vou_open(struct file *file)
 	if (v4l2_fh_is_singular_file(file) &&
 	    vou_dev->status == SH_VOU_INITIALISING) {
 		/* First open */
-		pm_runtime_get_sync(vou_dev->v4l2_dev.dev);
+		err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev);
+		if (err < 0) {
+			v4l2_fh_release(file);
+			goto done_open;
+		}
 		err = sh_vou_hw_init(vou_dev);
 		if (err < 0) {
 			pm_runtime_put(vou_dev->v4l2_dev.dev);
-- 
2.30.2

[PATCH AUTOSEL 5.10 09/70] media: mtk-vcodec: fix PM runtime get logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 908711f542c17fe61e5d653da1beb8e5ab5c7b50 ]

Currently, the driver just assumes that PM runtime logic
succeded resuming the device.

That may not be the case, as pm_runtime_get_sync()
can fail (but keeping the usage count incremented).

Replace the code to use pm_runtime_resume_and_get(),
and letting it return the error code.

This way, if mtk_vcodec_dec_pw_on() fails, the logic
under fops_vcodec_open() will do the right thing and
return an error, instead of just assuming that the
device is ready to be used.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 4 +++-
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 8 +++++---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h  | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
index 145686d2c219..f59ef8c8c9db 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
@@ -126,7 +126,9 @@ static int fops_vcodec_open(struct file *file)
 	mtk_vcodec_dec_set_default_params(ctx);
 
 	if (v4l2_fh_is_singular(&ctx->fh)) {
-		mtk_vcodec_dec_pw_on(&dev->pm);
+		ret = mtk_vcodec_dec_pw_on(&dev->pm);
+		if (ret < 0)
+			goto err_load_fw;
 		/*
 		 * Does nothing if firmware was already loaded.
 		 */
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index ddee7046ce42..6038db96f71c 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -88,13 +88,15 @@ void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
 	put_device(dev->pm.larbvdec);
 }
 
-void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
+int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(pm->dev);
+	ret = pm_runtime_resume_and_get(pm->dev);
 	if (ret)
-		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
+
+	return ret;
 }
 
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
index 872d8bf8cfaf..280aeaefdb65 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
@@ -12,7 +12,7 @@
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *dev);
 void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev);
 
-void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm);
+int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm);
 void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm);
-- 
2.30.2

[PATCH AUTOSEL 5.10 10/70] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 10343de268d10cf07b092b8b525e12ad558ead77 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a plus, pm_runtime_resume_and_get() doesn't return
positive numbers, so the return code validation can
be removed.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 9b22dd8e34f4..d515eb08c3ee 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2566,11 +2566,8 @@ static void s5p_jpeg_buf_queue(struct vb2_buffer *vb)
 static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
-	int ret;
-
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
 
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(ctx->jpeg->dev);
 }
 
 static void s5p_jpeg_stop_streaming(struct vb2_queue *q)
-- 
2.30.2

[PATCH AUTOSEL 5.10 11/70] media: sunxi: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 9c298f82d8392f799a0595f50076afa1d91e9092 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
index 3f81dd17755c..fbcca59a0517 100644
--- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
+++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
@@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
 		struct device *dev = ctx->dev->dev;
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0) {
 			dev_err(dev, "Failed to enable module\n");
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 12/70] media: sti/bdisp: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit c44eac5b72e23c31eefc0e10a71d9650036b8341 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.

The bdisp_start_streaming() doesn't take it into account, which
would unbalance PM usage counter at bdisp_stop_streaming().

The logic at bdisp_probe() is correct, but the best is to use
the same call along the driver.

So, replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index 060ca85f64d5..85288da9d2ae 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -499,7 +499,7 @@ static int bdisp_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct bdisp_ctx *ctx = q->drv_priv;
 	struct vb2_v4l2_buffer *buf;
-	int ret = pm_runtime_get_sync(ctx->bdisp_dev->dev);
+	int ret = pm_runtime_resume_and_get(ctx->bdisp_dev->dev);
 
 	if (ret < 0) {
 		dev_err(ctx->bdisp_dev->dev, "failed to set runtime PM\n");
@@ -1364,10 +1364,10 @@ static int bdisp_probe(struct platform_device *pdev)
 
 	/* Power management */
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_pm;
+		goto err_remove;
 	}
 
 	/* Filters */
@@ -1395,6 +1395,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	bdisp_hw_free_filters(bdisp->dev);
 err_pm:
 	pm_runtime_put(dev);
+err_remove:
 	bdisp_debugfs_remove(bdisp);
 	v4l2_device_unregister(&bdisp->v4l2_dev);
 err_clk:
-- 
2.30.2

[PATCH AUTOSEL 5.10 13/70] media: exynos4-is: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 59f96244af9403ddf4810ec5c0fbe8920857634e ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.

On some places, this is ok, but on others the usage count
ended being unbalanced on failures.

Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a bonus, such function always return zero on success. So,
some code can be simplified.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-capture.c   |  6 ++----
 drivers/media/platform/exynos4-is/fimc-is.c        |  4 ++--
 drivers/media/platform/exynos4-is/fimc-isp-video.c |  3 +--
 drivers/media/platform/exynos4-is/fimc-isp.c       |  7 +++----
 drivers/media/platform/exynos4-is/fimc-lite.c      |  5 +++--
 drivers/media/platform/exynos4-is/fimc-m2m.c       |  5 +----
 drivers/media/platform/exynos4-is/media-dev.c      |  9 +++------
 drivers/media/platform/exynos4-is/mipi-csis.c      | 10 ++++------
 8 files changed, 19 insertions(+), 30 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 6000a4e789ad..808b490c1910 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
 		goto unlock;
 
 	set_bit(ST_CAPT_BUSY, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = v4l2_fh_open(file);
 	if (ret) {
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 32ab01e89196..d26fa5967d82 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
 			goto err_irq;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_irq;
 
 	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index 612b9872afc8..8d9dc597deaa 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(&isp->pdev->dev);
+	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
 	if (ret < 0)
 		goto rel_fh;
 
@@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
 	if (!ret)
 		goto unlock;
 rel_fh:
-	pm_runtime_put_noidle(&isp->pdev->dev);
 	v4l2_fh_release(file);
 unlock:
 	mutex_unlock(&isp->video_lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index a77c49b18511..74b49d30901e 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 	pr_debug("on: %d\n", on);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put(&is->pdev->dev);
+		ret = pm_runtime_resume_and_get(&is->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index fdd0d369b192..d279f282d592 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
 	}
 
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_in_use;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
@@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
 	v4l2_fh_release(file);
 err_pm:
 	pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
 	clear_bit(ST_FLITE_IN_USE, &fimc->state);
 unlock:
 	mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
index 4acb179556c4..24b1badd2080 100644
--- a/drivers/media/platform/exynos4-is/fimc-m2m.c
+++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
@@ -73,17 +73,14 @@ static void fimc_m2m_shutdown(struct fimc_ctx *ctx)
 static int start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct fimc_ctx *ctx = q->drv_priv;
-	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
 }
 
 static void stop_streaming(struct vb2_queue *q)
 {
 	struct fimc_ctx *ctx = q->drv_priv;
 
-
 	fimc_m2m_shutdown(ctx);
 	fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
 	pm_runtime_put(&ctx->fimc_dev->pdev->dev);
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index e636c33e847b..1272f4703b81 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -508,11 +508,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 	if (!fmd->pmf)
 		return -ENXIO;
 
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0) {
-		pm_runtime_put(fmd->pmf);
+	ret = pm_runtime_resume_and_get(fmd->pmf);
+	if (ret < 0)
 		return ret;
-	}
 
 	fmd->num_sensors = 0;
 
@@ -1287,8 +1285,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
 	if (camclk->fmd->pmf == NULL)
 		return -ENODEV;
 
-	ret = pm_runtime_get_sync(camclk->fmd->pmf);
-	return ret < 0 ? ret : 0;
+	return pm_runtime_resume_and_get(camclk->fmd->pmf);
 }
 
 static void cam_clk_unprepare(struct clk_hw *hw)
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 1aac167abb17..ebf39c856894 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
 	struct device *dev = &state->pdev->dev;
 
 	if (on)
-		return pm_runtime_get_sync(dev);
+		return pm_runtime_resume_and_get(dev);
 
 	return pm_runtime_put_sync(dev);
 }
@@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 
 	if (enable) {
 		s5pcsis_clear_counters(state);
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
 	}
 
 	mutex_lock(&state->lock);
@@ -535,7 +533,7 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (!enable)
 		pm_runtime_put(&state->pdev->dev);
 
-	return ret == 1 ? 0 : ret;
+	return ret;
 }
 
 static int s5pcsis_enum_mbus_code(struct v4l2_subdev *sd,
-- 
2.30.2

[PATCH AUTOSEL 5.10 14/70] media: exynos-gsc: fix pm_runtime_get_sync() usage count

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 59087b66ea6730c130c57d23bd9fd139b78c1ba5 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

As a bonus, as pm_runtime_get_sync() always return 0 on
success, the logic can be simplified.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-m2m.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 27a3c92c73bc..f1cf847d1cc2 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -56,10 +56,8 @@ static void __gsc_m2m_job_abort(struct gsc_ctx *ctx)
 static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 {
 	struct gsc_ctx *ctx = q->drv_priv;
-	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
-	return ret > 0 ? 0 : ret;
+	return pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
 }
 
 static void __gsc_m2m_cleanup_queue(struct gsc_ctx *ctx)
-- 
2.30.2

[PATCH AUTOSEL 5.10 15/70] spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'

[Sasha Levin]

From: Jay Fang <f.fangjian@huawei.com>

[ Upstream commit 9e37a3ab0627011fb63875e9a93094b6fc8ddf48 ]

In function 'spi_test_run_iter': Value 'tx_buf' might be 'rx_buf'.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620629903-15493-5-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-loopback-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index df981e55c24c..89b91cdfb2a5 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -874,7 +874,7 @@ static int spi_test_run_iter(struct spi_device *spi,
 		test.transfers[i].len = len;
 		if (test.transfers[i].tx_buf)
 			test.transfers[i].tx_buf += tx_off;
-		if (test.transfers[i].tx_buf)
+		if (test.transfers[i].rx_buf)
 			test.transfers[i].rx_buf += rx_off;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 16/70] spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()

[Sasha Levin]

From: Jay Fang <f.fangjian@huawei.com>

[ Upstream commit 026a1dc1af52742c5897e64a3431445371a71871 ]

pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for
data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will
free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after
kfree() to avoid double free.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-topcliff-pch.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index b459e369079f..7fb020a1d66a 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -580,8 +580,10 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
 	data->pkt_tx_buff = kzalloc(size, GFP_KERNEL);
 	if (data->pkt_tx_buff != NULL) {
 		data->pkt_rx_buff = kzalloc(size, GFP_KERNEL);
-		if (!data->pkt_rx_buff)
+		if (!data->pkt_rx_buff) {
 			kfree(data->pkt_tx_buff);
+			data->pkt_tx_buff = NULL;
+		}
 	}
 
 	if (!data->pkt_rx_buff) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 17/70] spi: omap-100k: Fix the length judgment problem

[Sasha Levin]

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ]

word_len should be checked in the omap1_spi100k_setup_transfer
function to see if it exceeds 32.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap-100k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c
index ccd817ee4917..0d0cd061d356 100644
--- a/drivers/spi/spi-omap-100k.c
+++ b/drivers/spi/spi-omap-100k.c
@@ -241,7 +241,7 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi,
 	else
 		word_len = spi->bits_per_word;
 
-	if (spi->bits_per_word > 32)
+	if (word_len > 32)
 		return -EINVAL;
 	cs->word_len = word_len;
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 18/70] regulator: uniphier: Add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit d019f38a1af3c6015cde6a47951a3ec43beeed80 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705198-104566-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/uniphier-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
index 2e02e26b516c..e75b0973e325 100644
--- a/drivers/regulator/uniphier-regulator.c
+++ b/drivers/regulator/uniphier-regulator.c
@@ -201,6 +201,7 @@ static const struct of_device_id uniphier_regulator_match[] = {
 	},
 	{ /* Sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, uniphier_regulator_match);
 
 static struct platform_driver uniphier_regulator_driver = {
 	.probe = uniphier_regulator_probe,
-- 
2.30.2

[PATCH AUTOSEL 5.10 19/70] sched/core: Initialize the idle task with preemption disabled

[Sasha Levin]

From: Valentin Schneider <valentin.schneider@arm.com>

[ Upstream commit f1a0a376ca0c4ef1fc3d24e3e502acbb5b795674 ]

As pointed out by commit

  de9b8f5dcbd9 ("sched: Fix crash trying to dequeue/enqueue the idle thread")

init_idle() can and will be invoked more than once on the same idle
task. At boot time, it is invoked for the boot CPU thread by
sched_init(). Then smp_init() creates the threads for all the secondary
CPUs and invokes init_idle() on them.

As the hotplug machinery brings the secondaries to life, it will issue
calls to idle_thread_get(), which itself invokes init_idle() yet again.
In this case it's invoked twice more per secondary: at _cpu_up(), and at
bringup_cpu().

Given smp_init() already initializes the idle tasks for all *possible*
CPUs, no further initialization should be required. Now, removing
init_idle() from idle_thread_get() exposes some interesting expectations
with regards to the idle task's preempt_count: the secondary startup always
issues a preempt_disable(), requiring some reset of the preempt count to 0
between hot-unplug and hotplug, which is currently served by
idle_thread_get() -> idle_init().

Given the idle task is supposed to have preemption disabled once and never
see it re-enabled, it seems that what we actually want is to initialize its
preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove
init_idle() from idle_thread_get().

Secondary startups were patched via coccinelle:

  @begone@
  @@

  -preempt_disable();
  ...
  cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/kernel/smp.c          | 1 -
 arch/arc/kernel/smp.c            | 1 -
 arch/arm/kernel/smp.c            | 1 -
 arch/arm64/include/asm/preempt.h | 2 +-
 arch/arm64/kernel/smp.c          | 1 -
 arch/csky/kernel/smp.c           | 1 -
 arch/ia64/kernel/smpboot.c       | 1 -
 arch/mips/kernel/smp.c           | 1 -
 arch/openrisc/kernel/smp.c       | 2 --
 arch/parisc/kernel/smp.c         | 1 -
 arch/powerpc/kernel/smp.c        | 1 -
 arch/riscv/kernel/smpboot.c      | 1 -
 arch/s390/include/asm/preempt.h  | 4 ++--
 arch/s390/kernel/smp.c           | 1 -
 arch/sh/kernel/smp.c             | 2 --
 arch/sparc/kernel/smp_32.c       | 1 -
 arch/sparc/kernel/smp_64.c       | 3 ---
 arch/x86/include/asm/preempt.h   | 2 +-
 arch/x86/kernel/smpboot.c        | 1 -
 arch/xtensa/kernel/smp.c         | 1 -
 include/asm-generic/preempt.h    | 2 +-
 init/main.c                      | 6 +-----
 kernel/fork.c                    | 2 +-
 kernel/sched/core.c              | 2 +-
 kernel/smpboot.c                 | 1 -
 25 files changed, 8 insertions(+), 34 deletions(-)

diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index f4dd9f3f3001..4b2575f936d4 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -166,7 +166,6 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 52906d314537..db0e104d6835 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -189,7 +189,6 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 48099c6e1e4a..8aa7fa949c23 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -432,7 +432,6 @@ asmlinkage void secondary_start_kernel(void)
 #endif
 	pr_debug("CPU%u: Booted secondary processor\n", cpu);
 
-	preempt_disable();
 	trace_hardirqs_off();
 
 	/*
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
index 80e946b2abee..e83f0982b99c 100644
--- a/arch/arm64/include/asm/preempt.h
+++ b/arch/arm64/include/asm/preempt.h
@@ -23,7 +23,7 @@ static inline void preempt_count_set(u64 pc)
 } while (0)
 
 #define init_idle_preempt_count(p, cpu) do { \
-	task_thread_info(p)->preempt_count = PREEMPT_ENABLED; \
+	task_thread_info(p)->preempt_count = PREEMPT_DISABLED; \
 } while (0)
 
 static inline void set_preempt_need_resched(void)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 18e9727d3f64..feee5a3cd128 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -223,7 +223,6 @@ asmlinkage notrace void secondary_start_kernel(void)
 		init_gic_priority_masking();
 
 	rcu_cpu_starting(cpu);
-	preempt_disable();
 	trace_hardirqs_off();
 
 	/*
diff --git a/arch/csky/kernel/smp.c b/arch/csky/kernel/smp.c
index 041d0de6a1b6..1a8d7eaf1ff7 100644
--- a/arch/csky/kernel/smp.c
+++ b/arch/csky/kernel/smp.c
@@ -282,7 +282,6 @@ void csky_start_secondary(void)
 	pr_info("CPU%u Online: %s...\n", cpu, __func__);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 093040f7e626..0cad990385c0 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -440,7 +440,6 @@ start_secondary (void *unused)
 #endif
 	efi_map_pal_code();
 	cpu_init();
-	preempt_disable();
 	smp_callin();
 
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 48d84d5fcc36..ff25926c5458 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -348,7 +348,6 @@ asmlinkage void start_secondary(void)
 	 */
 
 	calibrate_delay();
-	preempt_disable();
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
diff --git a/arch/openrisc/kernel/smp.c b/arch/openrisc/kernel/smp.c
index 29c82ef2e207..e4dad76066ae 100644
--- a/arch/openrisc/kernel/smp.c
+++ b/arch/openrisc/kernel/smp.c
@@ -134,8 +134,6 @@ asmlinkage __init void secondary_start_kernel(void)
 	set_cpu_online(cpu, true);
 
 	local_irq_enable();
-
-	preempt_disable();
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 10227f667c8a..1405b603b91b 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -302,7 +302,6 @@ void __init smp_callin(unsigned long pdce_proc)
 #endif
 
 	smp_cpu_init(slave_id);
-	preempt_disable();
 
 	flush_cache_all_local(); /* start with known state */
 	flush_tlb_all_local(NULL);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index db7ac77bea3a..0760230be56f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1426,7 +1426,6 @@ void start_secondary(void *unused)
 	smp_store_cpu_info(cpu);
 	set_dec(tb_ticks_per_jiffy);
 	rcu_cpu_starting(cpu);
-	preempt_disable();
 	cpu_callin_map[cpu] = 1;
 
 	if (smp_ops->setup_cpu)
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 96167d55ed98..0b04e0eae3ab 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -166,7 +166,6 @@ asmlinkage __visible void smp_callin(void)
 	 * Disable preemption before enabling interrupts, so we don't try to
 	 * schedule a CPU that hasn't actually started yet.
 	 */
-	preempt_disable();
 	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h
index 6ede29907fbf..e38480eb58fa 100644
--- a/arch/s390/include/asm/preempt.h
+++ b/arch/s390/include/asm/preempt.h
@@ -32,7 +32,7 @@ static inline void preempt_count_set(int pc)
 #define init_task_preempt_count(p)	do { } while (0)
 
 #define init_idle_preempt_count(p, cpu)	do { \
-	S390_lowcore.preempt_count = PREEMPT_ENABLED; \
+	S390_lowcore.preempt_count = PREEMPT_DISABLED; \
 } while (0)
 
 static inline void set_preempt_need_resched(void)
@@ -91,7 +91,7 @@ static inline void preempt_count_set(int pc)
 #define init_task_preempt_count(p)	do { } while (0)
 
 #define init_idle_preempt_count(p, cpu)	do { \
-	S390_lowcore.preempt_count = PREEMPT_ENABLED; \
+	S390_lowcore.preempt_count = PREEMPT_DISABLED; \
 } while (0)
 
 static inline void set_preempt_need_resched(void)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 791bc373418b..7db5460553b7 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -863,7 +863,6 @@ static void smp_init_secondary(void)
 	set_cpu_flag(CIF_ASCE_SECONDARY);
 	cpu_init();
 	rcu_cpu_starting(cpu);
-	preempt_disable();
 	init_cpu_timer();
 	vtime_init();
 	pfault_init();
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 372acdc9033e..65924d9ec245 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -186,8 +186,6 @@ asmlinkage void start_secondary(void)
 
 	per_cpu_trap_init();
 
-	preempt_disable();
-
 	notify_cpu_starting(cpu);
 
 	local_irq_enable();
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 50c127ab46d5..22b148e5a5f8 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -348,7 +348,6 @@ static void sparc_start_secondary(void *arg)
 	 */
 	arch_cpu_pre_starting(arg);
 
-	preempt_disable();
 	cpu = smp_processor_id();
 
 	notify_cpu_starting(cpu);
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index e38d8bf454e8..ae5faa1d989d 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -138,9 +138,6 @@ void smp_callin(void)
 
 	set_cpu_online(cpuid, true);
 
-	/* idle thread is expected to have preempt disabled */
-	preempt_disable();
-
 	local_irq_enable();
 
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index 69485ca13665..a334dd0d7c42 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -43,7 +43,7 @@ static __always_inline void preempt_count_set(int pc)
 #define init_task_preempt_count(p) do { } while (0)
 
 #define init_idle_preempt_count(p, cpu) do { \
-	per_cpu(__preempt_count, (cpu)) = PREEMPT_ENABLED; \
+	per_cpu(__preempt_count, (cpu)) = PREEMPT_DISABLED; \
 } while (0)
 
 /*
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 582387fc939f..8baff500914e 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -230,7 +230,6 @@ static void notrace start_secondary(void *unused)
 	cpu_init_exception_handling();
 	cpu_init();
 	x86_cpuinit.early_percpu_clock_init();
-	preempt_disable();
 	smp_callin();
 
 	enable_start_cpu0 = 0;
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index cd85a7a2722b..1254da07ead1 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -145,7 +145,6 @@ void secondary_start_kernel(void)
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
 	enter_lazy_tlb(mm, current);
 
-	preempt_disable();
 	trace_hardirqs_off();
 
 	calibrate_delay();
diff --git a/include/asm-generic/preempt.h b/include/asm-generic/preempt.h
index d683f5e6d791..b4d43a4af5f7 100644
--- a/include/asm-generic/preempt.h
+++ b/include/asm-generic/preempt.h
@@ -29,7 +29,7 @@ static __always_inline void preempt_count_set(int pc)
 } while (0)
 
 #define init_idle_preempt_count(p, cpu) do { \
-	task_thread_info(p)->preempt_count = PREEMPT_ENABLED; \
+	task_thread_info(p)->preempt_count = PREEMPT_DISABLED; \
 } while (0)
 
 static __always_inline void set_preempt_need_resched(void)
diff --git a/init/main.c b/init/main.c
index b4449544390c..dd26a42e80a8 100644
--- a/init/main.c
+++ b/init/main.c
@@ -914,11 +914,7 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 	 * time - but meanwhile we still have a functioning scheduler.
 	 */
 	sched_init();
-	/*
-	 * Disable preemption - early bootup scheduling is extremely
-	 * fragile until we cpu_idle() for the first time.
-	 */
-	preempt_disable();
+
 	if (WARN(!irqs_disabled(),
 		 "Interrupts were enabled *very* early, fixing it\n"))
 		local_irq_disable();
diff --git a/kernel/fork.c b/kernel/fork.c
index 281addb694df..096945ef49ad 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2392,7 +2392,7 @@ static inline void init_idle_pids(struct task_struct *idle)
 	}
 }
 
-struct task_struct *fork_idle(int cpu)
+struct task_struct * __init fork_idle(int cpu)
 {
 	struct task_struct *task;
 	struct kernel_clone_args args = {
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 57b236251884..bd3fa14fda1f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6512,7 +6512,7 @@ void show_state_filter(unsigned long state_filter)
  * NOTE: this function does not set the idle thread's NEED_RESCHED
  * flag, to make booting more robust.
  */
-void init_idle(struct task_struct *idle, int cpu)
+void __init init_idle(struct task_struct *idle, int cpu)
 {
 	struct rq *rq = cpu_rq(cpu);
 	unsigned long flags;
diff --git a/kernel/smpboot.c b/kernel/smpboot.c
index f25208e8df83..e4163042c4d6 100644
--- a/kernel/smpboot.c
+++ b/kernel/smpboot.c
@@ -33,7 +33,6 @@ struct task_struct *idle_thread_get(unsigned int cpu)
 
 	if (!tsk)
 		return ERR_PTR(-ENOMEM);
-	init_idle(tsk, cpu);
 	return tsk;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 20/70] hwrng: exynos - Fix runtime PM imbalance on error

[Sasha Levin]

From: Łukasz Stelmach <l.stelmach@samsung.com>

[ Upstream commit 0cdbabf8bb7a6147f5adf37dbc251e92a1bbc2c7 ]

pm_runtime_resume_and_get() wraps around pm_runtime_get_sync() and
decrements the runtime PM usage counter in case the latter function
fails and keeps the counter balanced.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/exynos-trng.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hw_random/exynos-trng.c b/drivers/char/hw_random/exynos-trng.c
index 8e1fe3f8dd2d..c8db62bc5ff7 100644
--- a/drivers/char/hw_random/exynos-trng.c
+++ b/drivers/char/hw_random/exynos-trng.c
@@ -132,7 +132,7 @@ static int exynos_trng_probe(struct platform_device *pdev)
 		return PTR_ERR(trng->mem);
 
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not get runtime PM.\n");
 		goto err_pm_get;
@@ -165,7 +165,7 @@ static int exynos_trng_probe(struct platform_device *pdev)
 	clk_disable_unprepare(trng->clk);
 
 err_clock:
-	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 
 err_pm_get:
 	pm_runtime_disable(&pdev->dev);
-- 
2.30.2

[PATCH AUTOSEL 5.10 21/70] crypto: nx - add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/nx/nx-842-pseries.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index 2de5e3672e42..258c5e38a551 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -1071,6 +1071,7 @@ static const struct vio_device_id nx842_vio_driver_ids[] = {
 	{"ibm,compression-v1", "ibm,compression"},
 	{"", ""},
 };
+MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids);
 
 static struct vio_driver nx842_vio_driver = {
 	.name = KBUILD_MODNAME,
-- 
2.30.2

[PATCH AUTOSEL 5.10 22/70] regmap-i2c: Set regmap max raw r/w from quirks

[Sasha Levin]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit ea030ca688193462b8d612c1628c37129aa30072 ]

Set regmap raw read/write from i2c quirks max read/write
so regmap_raw_read/write can split the access into chunks

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210512135222.223203-1-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap-i2c.c | 45 +++++++++++++++++++++++++++-----
 drivers/base/regmap/regmap.c     |  2 ++
 include/linux/regmap.h           |  2 ++
 3 files changed, 42 insertions(+), 7 deletions(-)

diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index 62b95a9212ae..980e5ce6a3a3 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -306,33 +306,64 @@ static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = {
 static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 					const struct regmap_config *config)
 {
+	const struct i2c_adapter_quirks *quirks;
+	const struct regmap_bus *bus = NULL;
+	struct regmap_bus *ret_bus;
+	u16 max_read = 0, max_write = 0;
+
 	if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
-		return &regmap_i2c;
+		bus = &regmap_i2c;
 	else if (config->val_bits == 8 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_I2C_BLOCK))
-		return &regmap_i2c_smbus_i2c_block;
+		bus = &regmap_i2c_smbus_i2c_block;
 	else if (config->val_bits == 8 && config->reg_bits == 16 &&
 		i2c_check_functionality(i2c->adapter,
 					I2C_FUNC_SMBUS_I2C_BLOCK))
-		return &regmap_i2c_smbus_i2c_block_reg16;
+		bus = &regmap_i2c_smbus_i2c_block_reg16;
 	else if (config->val_bits == 16 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_WORD_DATA))
 		switch (regmap_get_val_endian(&i2c->dev, NULL, config)) {
 		case REGMAP_ENDIAN_LITTLE:
-			return &regmap_smbus_word;
+			bus = &regmap_smbus_word;
+			break;
 		case REGMAP_ENDIAN_BIG:
-			return &regmap_smbus_word_swapped;
+			bus = &regmap_smbus_word_swapped;
+			break;
 		default:		/* everything else is not supported */
 			break;
 		}
 	else if (config->val_bits == 8 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_BYTE_DATA))
-		return &regmap_smbus_byte;
+		bus = &regmap_smbus_byte;
+
+	if (!bus)
+		return ERR_PTR(-ENOTSUPP);
+
+	quirks = i2c->adapter->quirks;
+	if (quirks) {
+		if (quirks->max_read_len &&
+		    (bus->max_raw_read == 0 || bus->max_raw_read > quirks->max_read_len))
+			max_read = quirks->max_read_len;
+
+		if (quirks->max_write_len &&
+		    (bus->max_raw_write == 0 || bus->max_raw_write > quirks->max_write_len))
+			max_write = quirks->max_write_len;
+
+		if (max_read || max_write) {
+			ret_bus = kmemdup(bus, sizeof(*bus), GFP_KERNEL);
+			if (!ret_bus)
+				return ERR_PTR(-ENOMEM);
+			ret_bus->free_on_exit = true;
+			ret_bus->max_raw_read = max_read;
+			ret_bus->max_raw_write = max_write;
+			bus = ret_bus;
+		}
+	}
 
-	return ERR_PTR(-ENOTSUPP);
+	return bus;
 }
 
 struct regmap *__regmap_init_i2c(struct i2c_client *i2c,
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 5db536ccfcd6..e4802aa512a5 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1496,6 +1496,8 @@ void regmap_exit(struct regmap *map)
 		mutex_destroy(&map->mutex);
 	kfree_const(map->name);
 	kfree(map->patch);
+	if (map->bus && map->bus->free_on_exit)
+		kfree(map->bus);
 	kfree(map);
 }
 EXPORT_SYMBOL_GPL(regmap_exit);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e7834d98207f..56503d99eda7 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -497,6 +497,7 @@ typedef void (*regmap_hw_free_context)(void *context);
  *     DEFAULT, BIG is assumed.
  * @max_raw_read: Max raw read size that can be used on the bus.
  * @max_raw_write: Max raw write size that can be used on the bus.
+ * @free_on_exit: kfree this on exit of regmap
  */
 struct regmap_bus {
 	bool fast_io;
@@ -514,6 +515,7 @@ struct regmap_bus {
 	enum regmap_endian val_format_endian_default;
 	size_t max_raw_read;
 	size_t max_raw_write;
+	bool free_on_exit;
 };
 
 /*
-- 
2.30.2

[PATCH AUTOSEL 5.10 23/70] media: sti: fix obj-$(config) targets

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 56c1f0876293888f686e31278d183d4af2cac3c3 ]

The right thing to do is to add a new object to the building
system when a certain config option is selected, and *not*
override them.

So, fix obj-$(config) logic at sti makefiles, using "+=",
instead of ":=".

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/Makefile | 2 +-
 drivers/media/platform/sti/delta/Makefile | 2 +-
 drivers/media/platform/sti/hva/Makefile   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/Makefile b/drivers/media/platform/sti/bdisp/Makefile
index caf7ccd193ea..39ade0a34723 100644
--- a/drivers/media/platform/sti/bdisp/Makefile
+++ b/drivers/media/platform/sti/bdisp/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_BDISP) := bdisp.o
+obj-$(CONFIG_VIDEO_STI_BDISP) += bdisp.o
 
 bdisp-objs := bdisp-v4l2.o bdisp-hw.o bdisp-debug.o
diff --git a/drivers/media/platform/sti/delta/Makefile b/drivers/media/platform/sti/delta/Makefile
index 92b37e216f00..32412fa4c632 100644
--- a/drivers/media/platform/sti/delta/Makefile
+++ b/drivers/media/platform/sti/delta/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_DELTA_DRIVER) := st-delta.o
+obj-$(CONFIG_VIDEO_STI_DELTA_DRIVER) += st-delta.o
 st-delta-y := delta-v4l2.o delta-mem.o delta-ipc.o delta-debug.o
 
 # MJPEG support
diff --git a/drivers/media/platform/sti/hva/Makefile b/drivers/media/platform/sti/hva/Makefile
index 74b41ec52f97..b5a5478bdd01 100644
--- a/drivers/media/platform/sti/hva/Makefile
+++ b/drivers/media/platform/sti/hva/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VIDEO_STI_HVA) := st-hva.o
+obj-$(CONFIG_VIDEO_STI_HVA) += st-hva.o
 st-hva-y := hva-v4l2.o hva-hw.o hva-mem.o hva-h264.o
 st-hva-$(CONFIG_VIDEO_STI_HVA_DEBUGFS) += hva-debugfs.o
-- 
2.30.2

[PATCH AUTOSEL 5.10 24/70] media: cpia2: fix memory leak in cpia2_usb_probe

[Sasha Levin]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]

syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cpia2/cpia2.h      |  1 +
 drivers/media/usb/cpia2/cpia2_core.c | 12 ++++++++++++
 drivers/media/usb/cpia2/cpia2_usb.c  | 13 +++++++------
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/cpia2/cpia2.h b/drivers/media/usb/cpia2/cpia2.h
index 50835f5f7512..57b7f1ea68da 100644
--- a/drivers/media/usb/cpia2/cpia2.h
+++ b/drivers/media/usb/cpia2/cpia2.h
@@ -429,6 +429,7 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
 int cpia2_do_command(struct camera_data *cam,
 		     unsigned int command,
 		     unsigned char direction, unsigned char param);
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf);
 struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf);
 int cpia2_init_camera(struct camera_data *cam);
 int cpia2_allocate_buffers(struct camera_data *cam);
diff --git a/drivers/media/usb/cpia2/cpia2_core.c b/drivers/media/usb/cpia2/cpia2_core.c
index e747548ab286..b5a2d06fb356 100644
--- a/drivers/media/usb/cpia2/cpia2_core.c
+++ b/drivers/media/usb/cpia2/cpia2_core.c
@@ -2163,6 +2163,18 @@ static void reset_camera_struct(struct camera_data *cam)
 	cam->height = cam->params.roi.height;
 }
 
+/******************************************************************************
+ *
+ *  cpia2_init_camera_struct
+ *
+ *  Deinitialize camera struct
+ *****************************************************************************/
+void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf)
+{
+	v4l2_device_unregister(&cam->v4l2_dev);
+	kfree(cam);
+}
+
 /******************************************************************************
  *
  *  cpia2_init_camera_struct
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index 3ab80a7b4498..76aac06f9fb8 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -844,15 +844,13 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = set_alternate(cam, USBIF_CMDONLY);
 	if (ret < 0) {
 		ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 
 	if((ret = cpia2_init_camera(cam)) < 0) {
 		ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 	LOG("  CPiA Version: %d.%02d (%d.%d)\n",
 	       cam->params.version.firmware_revision_hi,
@@ -872,11 +870,14 @@ static int cpia2_usb_probe(struct usb_interface *intf,
 	ret = cpia2_register_camera(cam);
 	if (ret < 0) {
 		ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
-		kfree(cam);
-		return ret;
+		goto alt_err;
 	}
 
 	return 0;
+
+alt_err:
+	cpia2_deinit_camera_struct(cam, intf);
+	return ret;
 }
 
 /******************************************************************************
-- 
2.30.2

[PATCH AUTOSEL 5.10 25/70] media: cobalt: fix race condition in setting HPD

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]

The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.

This is used among other things for setting the HPD output pin.

But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.

Serialize this function with a mutex.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cobalt/cobalt-driver.c | 1 +
 drivers/media/pci/cobalt/cobalt-driver.h | 7 ++++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 0695078ef812..1bd8bbe57a30 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -667,6 +667,7 @@ static int cobalt_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	cobalt->pci_dev = pci_dev;
 	cobalt->instance = i;
+	mutex_init(&cobalt->pci_lock);
 
 	retval = v4l2_device_register(&pci_dev->dev, &cobalt->v4l2_dev);
 	if (retval) {
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h
index bca68572b324..12c33e035904 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -251,6 +251,8 @@ struct cobalt {
 	int instance;
 	struct pci_dev *pci_dev;
 	struct v4l2_device v4l2_dev;
+	/* serialize PCI access in cobalt_s_bit_sysctrl() */
+	struct mutex pci_lock;
 
 	void __iomem *bar0, *bar1;
 
@@ -320,10 +322,13 @@ static inline u32 cobalt_g_sysctrl(struct cobalt *cobalt)
 static inline void cobalt_s_bit_sysctrl(struct cobalt *cobalt,
 					int bit, int val)
 {
-	u32 ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
+	u32 ctrl;
 
+	mutex_lock(&cobalt->pci_lock);
+	ctrl = cobalt_read_bar1(cobalt, COBALT_SYS_CTRL_BASE);
 	cobalt_write_bar1(cobalt, COBALT_SYS_CTRL_BASE,
 			(ctrl & ~(1UL << bit)) | (val << bit));
+	mutex_unlock(&cobalt->pci_lock);
 }
 
 static inline u32 cobalt_g_sysstat(struct cobalt *cobalt)
-- 
2.30.2

[PATCH AUTOSEL 5.10 26/70] media: hevc: Fix dependent slice segment flags

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 67a7e53d5b21f3a84efc03a4e62db7caf97841ef ]

Dependent slice segment flag for PPS control is misnamed. It should have
"enabled" at the end. It only tells if this flag is present in slice
header or not and not the actual value.

Fix this by renaming the PPS flag and introduce another flag for slice
control which tells actual value.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 5 ++++-
 drivers/staging/media/sunxi/cedrus/cedrus_h265.c          | 4 ++--
 include/media/hevc-ctrls.h                                | 3 ++-
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index ce728c757eaf..b864869b42bc 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -4030,7 +4030,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -4238,6 +4238,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry
 
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index ce497d0197df..10744fab7cea 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -477,8 +477,8 @@ static void cedrus_h265_setup(struct cedrus_ctx *ctx,
 				slice_params->flags);
 
 	reg |= VE_DEC_H265_FLAG(VE_DEC_H265_DEC_SLICE_HDR_INFO0_FLAG_DEPENDENT_SLICE_SEGMENT,
-				V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT,
-				pps->flags);
+				V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT,
+				slice_params->flags);
 
 	/* FIXME: For multi-slice support. */
 	reg |= VE_DEC_H265_DEC_SLICE_HDR_INFO0_FLAG_FIRST_SLICE_SEGMENT_IN_PIC;
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index 1009cf0891cc..a3b650ab00f6 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -81,7 +81,7 @@ struct v4l2_ctrl_hevc_sps {
 	__u64	flags;
 };
 
-#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT		(1ULL << 0)
+#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED	(1ULL << 0)
 #define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT			(1ULL << 1)
 #define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED		(1ULL << 2)
 #define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT			(1ULL << 3)
@@ -160,6 +160,7 @@ struct v4l2_hevc_pred_weight_table {
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV		(1ULL << 6)
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7)
 #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8)
+#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT	(1ULL << 9)
 
 struct v4l2_ctrl_hevc_slice_params {
 	__u32	bit_size;
-- 
2.30.2

[PATCH AUTOSEL 5.10 27/70] media: pvrusb2: fix warning in pvr2_i2c_core_done

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]

syzbot has reported the following warning in pvr2_i2c_done:

	sysfs group 'power' not found for kobject '1-0043'

When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.

To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.

Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index f4a727918e35..d38dee1792e4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2676,9 +2676,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
 		pvr2_stream_destroy(hdw->vid_stream);
 		hdw->vid_stream = NULL;
 	}
-	pvr2_i2c_core_done(hdw);
 	v4l2_device_unregister(&hdw->v4l2_dev);
-	pvr2_hdw_remove_usb_stuff(hdw);
+	pvr2_hdw_disconnect(hdw);
 	mutex_lock(&pvr2_unit_mtx);
 	do {
 		if ((hdw->unit_number >= 0) &&
@@ -2705,6 +2704,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
 {
 	pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
 	LOCK_TAKE(hdw->big_lock);
+	pvr2_i2c_core_done(hdw);
 	LOCK_TAKE(hdw->ctl_lock);
 	pvr2_hdw_remove_usb_stuff(hdw);
 	LOCK_GIVE(hdw->ctl_lock);
-- 
2.30.2

[PATCH AUTOSEL 5.10 28/70] media: imx: imx7_mipi_csis: Fix logging of only error event counters

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d2fcc9c2de1191ea80366e3658711753738dd10a ]

The mipi_csis_events array ends with 6 non-error events, not 4. Update
mipi_csis_log_counters() accordingly. While at it, log event counters in
forward order, as there's no reason to log them backward.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 7612993cc1d6..c5a548976f1d 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -597,13 +597,15 @@ static void mipi_csis_clear_counters(struct csi_state *state)
 
 static void mipi_csis_log_counters(struct csi_state *state, bool non_errors)
 {
-	int i = non_errors ? MIPI_CSIS_NUM_EVENTS : MIPI_CSIS_NUM_EVENTS - 4;
+	unsigned int num_events = non_errors ? MIPI_CSIS_NUM_EVENTS
+				: MIPI_CSIS_NUM_EVENTS - 6;
 	struct device *dev = &state->pdev->dev;
 	unsigned long flags;
+	unsigned int i;
 
 	spin_lock_irqsave(&state->slock, flags);
 
-	for (i--; i >= 0; i--) {
+	for (i = 0; i < num_events; ++i) {
 		if (state->events[i].counter > 0 || state->debug)
 			dev_info(dev, "%s events: %d\n", state->events[i].name,
 				 state->events[i].counter);
-- 
2.30.2

[PATCH AUTOSEL 5.10 29/70] crypto: qat - check return code of qat_hal_rd_rel_reg()

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]

Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c
index 52ef80efeddc..b40e81e0088f 100644
--- a/drivers/crypto/qat/qat_common/qat_hal.c
+++ b/drivers/crypto/qat/qat_common/qat_hal.c
@@ -1213,7 +1213,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle,
 		pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr);
 		return -EINVAL;
 	}
-	qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+	if (status) {
+		pr_err("QAT: failed to read register");
+		return status;
+	}
 	gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum);
 	data16low = 0xffff & data;
 	data16hi = 0xffff & (data >> 0x10);
-- 
2.30.2

[PATCH AUTOSEL 5.10 30/70] crypto: qat - remove unused macro in FW loader

[Sasha Levin]

From: Jack Xu <jack.xu@intel.com>

[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]

Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qat/qat_common/qat_uclo.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/crypto/qat/qat_common/qat_uclo.c b/drivers/crypto/qat/qat_common/qat_uclo.c
index 5d1f28cd6680..6adc91fedb08 100644
--- a/drivers/crypto/qat/qat_common/qat_uclo.c
+++ b/drivers/crypto/qat/qat_common/qat_uclo.c
@@ -342,7 +342,6 @@ static int qat_uclo_init_umem_seg(struct icp_qat_fw_loader_handle *handle,
 	return 0;
 }
 
-#define ICP_DH895XCC_PESRAM_BAR_SIZE 0x80000
 static int qat_uclo_init_ae_memory(struct icp_qat_fw_loader_handle *handle,
 				   struct icp_qat_uof_initmem *init_mem)
 {
-- 
2.30.2

[PATCH AUTOSEL 5.10 31/70] crypto: qce: skcipher: Fix incorrect sg count for dma transfers

[Sasha Levin]

From: Thara Gopinath <thara.gopinath@linaro.org>

[ Upstream commit 1339a7c3ba05137a2d2fe75f602311bbfc6fab33 ]

Use the sg count returned by dma_map_sg to call into
dmaengine_prep_slave_sg rather than using the original sg count. dma_map_sg
can merge consecutive sglist entries, thus making the original sg count
wrong. This is a fix for memory coruption issues observed while testing
encryption/decryption of large messages using libkcapi framework.

Patch has been tested further by running full suite of tcrypt.ko tests
including fuzz tests.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qce/skcipher.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/qce/skcipher.c b/drivers/crypto/qce/skcipher.c
index a2d3da0ad95f..5a6559131eac 100644
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -71,7 +71,7 @@ qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
 	struct scatterlist *sg;
 	bool diff_dst;
 	gfp_t gfp;
-	int ret;
+	int dst_nents, src_nents, ret;
 
 	rctx->iv = req->iv;
 	rctx->ivsize = crypto_skcipher_ivsize(skcipher);
@@ -122,21 +122,22 @@ qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
 	sg_mark_end(sg);
 	rctx->dst_sg = rctx->dst_tbl.sgl;
 
-	ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-	if (ret < 0)
+	dst_nents = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+	if (dst_nents < 0)
 		goto error_free;
 
 	if (diff_dst) {
-		ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-		if (ret < 0)
+		src_nents = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+		if (src_nents < 0)
 			goto error_unmap_dst;
 		rctx->src_sg = req->src;
 	} else {
 		rctx->src_sg = rctx->dst_sg;
+		src_nents = dst_nents - 1;
 	}
 
-	ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-			       rctx->dst_sg, rctx->dst_nents,
+	ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, src_nents,
+			       rctx->dst_sg, dst_nents,
 			       qce_skcipher_done, async_req);
 	if (ret)
 		goto error_unmap_src;
-- 
2.30.2

[PATCH AUTOSEL 5.10 32/70] arm64: perf: Convert snprintf to sysfs_emit

[Sasha Levin]

From: Tian Tao <tiantao6@hisilicon.com>

[ Upstream commit a5740e955540181f4ab8f076cc9795c6bbe4d730 ]

Use sysfs_emit instead of snprintf to avoid buf overrun,because in
sysfs_emit it strictly checks whether buf is null or buf whether
pagesize aligned, otherwise it returns an error.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1621497585-30887-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/perf_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 11852e05ee32..cdb3d4549b3a 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -312,7 +312,7 @@ static ssize_t slots_show(struct device *dev, struct device_attribute *attr,
 	struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
 	u32 slots = cpu_pmu->reg_pmmir & ARMV8_PMU_SLOTS_MASK;
 
-	return snprintf(page, PAGE_SIZE, "0x%08x\n", slots);
+	return sysfs_emit(page, "0x%08x\n", slots);
 }
 
 static DEVICE_ATTR_RO(slots);
-- 
2.30.2

[PATCH AUTOSEL 5.10 33/70] sched/fair: Fix ascii art by relpacing tabs

[Sasha Levin]

From: Odin Ugedal <odin@uged.al>

[ Upstream commit 08f7c2f4d0e9f4283f5796b8168044c034a1bfcb ]

When using something other than 8 spaces per tab, this ascii art
makes not sense, and the reader might end up wondering what this
advanced equation "is".

Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210518125202.78658-4-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d6e1c90de570..3d92de7909bf 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3141,7 +3141,7 @@ void reweight_task(struct task_struct *p, int prio)
  *
  *                     tg->weight * grq->load.weight
  *   ge->load.weight = -----------------------------               (1)
- *			  \Sum grq->load.weight
+ *                       \Sum grq->load.weight
  *
  * Now, because computing that sum is prohibitively expensive to compute (been
  * there, done that) we approximate it with this average stuff. The average
@@ -3155,7 +3155,7 @@ void reweight_task(struct task_struct *p, int prio)
  *
  *                     tg->weight * grq->avg.load_avg
  *   ge->load.weight = ------------------------------              (3)
- *				tg->load_avg
+ *                             tg->load_avg
  *
  * Where: tg->load_avg ~= \Sum grq->avg.load_avg
  *
@@ -3171,7 +3171,7 @@ void reweight_task(struct task_struct *p, int prio)
  *
  *                     tg->weight * grq->load.weight
  *   ge->load.weight = ----------------------------- = tg->weight   (4)
- *			    grp->load.weight
+ *                         grp->load.weight
  *
  * That is, the sum collapses because all other CPUs are idle; the UP scenario.
  *
@@ -3190,7 +3190,7 @@ void reweight_task(struct task_struct *p, int prio)
  *
  *                     tg->weight * grq->load.weight
  *   ge->load.weight = -----------------------------		   (6)
- *				tg_load_avg'
+ *                             tg_load_avg'
  *
  * Where:
  *
-- 
2.30.2

[PATCH AUTOSEL 5.10 34/70] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off

[Sasha Levin]

From: Dillon Min <dillon.minfei@gmail.com>

[ Upstream commit 24786ccd9c80fdb05494aa4d90fcb8f34295c193 ]

On some platform(imx6q), xvclk might not switch on in advance,
also for power save purpose, xvclk should not be always on.
so, add clk_prepare_enable(), clk_disable_unprepare() in driver
side to set xvclk on/off at proper stage.

Add following changes:
- add 'struct clk *clk;' in 'struct ov2659 {}'
- enable xvclk in ov2659_power_on()
- disable xvclk in ov2659_power_off()

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2659.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 42f64175a6df..fb78a1cedc03 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -204,6 +204,7 @@ struct ov2659 {
 	struct i2c_client *client;
 	struct v4l2_ctrl_handler ctrls;
 	struct v4l2_ctrl *link_frequency;
+	struct clk *clk;
 	const struct ov2659_framesize *frame_size;
 	struct sensor_register *format_ctrl_regs;
 	struct ov2659_pll_ctrl pll;
@@ -1270,6 +1271,8 @@ static int ov2659_power_off(struct device *dev)
 
 	gpiod_set_value(ov2659->pwdn_gpio, 1);
 
+	clk_disable_unprepare(ov2659->clk);
+
 	return 0;
 }
 
@@ -1278,9 +1281,17 @@ static int ov2659_power_on(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov2659 *ov2659 = to_ov2659(sd);
+	int ret;
 
 	dev_dbg(&client->dev, "%s:\n", __func__);
 
+	ret = clk_prepare_enable(ov2659->clk);
+	if (ret) {
+		dev_err(&client->dev, "%s: failed to enable clock\n",
+			__func__);
+		return ret;
+	}
+
 	gpiod_set_value(ov2659->pwdn_gpio, 0);
 
 	if (ov2659->resetb_gpio) {
@@ -1425,7 +1436,6 @@ static int ov2659_probe(struct i2c_client *client)
 	const struct ov2659_platform_data *pdata = ov2659_get_pdata(client);
 	struct v4l2_subdev *sd;
 	struct ov2659 *ov2659;
-	struct clk *clk;
 	int ret;
 
 	if (!pdata) {
@@ -1440,11 +1450,11 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->pdata = pdata;
 	ov2659->client = client;
 
-	clk = devm_clk_get(&client->dev, "xvclk");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ov2659->clk = devm_clk_get(&client->dev, "xvclk");
+	if (IS_ERR(ov2659->clk))
+		return PTR_ERR(ov2659->clk);
 
-	ov2659->xvclk_frequency = clk_get_rate(clk);
+	ov2659->xvclk_frequency = clk_get_rate(ov2659->clk);
 	if (ov2659->xvclk_frequency < 6000000 ||
 	    ov2659->xvclk_frequency > 27000000)
 		return -EINVAL;
@@ -1506,7 +1516,9 @@ static int ov2659_probe(struct i2c_client *client)
 	ov2659->frame_size = &ov2659_framesizes[2];
 	ov2659->format_ctrl_regs = ov2659_formats[0].format_ctrl_regs;
 
-	ov2659_power_on(&client->dev);
+	ret = ov2659_power_on(&client->dev);
+	if (ret < 0)
+		goto error;
 
 	ret = ov2659_detect(sd);
 	if (ret < 0)
-- 
2.30.2

[PATCH AUTOSEL 5.10 35/70] media: bt878: do not schedule tasklet when it is not setup

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a3a54bf4bddaecda8b5767209cfc703f0be2841d ]

There is a problem with the tasklet in bt878. bt->tasklet is set by
dvb-bt8xx.ko, and bt878.ko can be loaded independently.
In this case if interrupt comes it may cause null-ptr-dereference.
To solve this issue, we check if the tasklet is actually set before
calling tasklet_schedule.

[    1.750438] bt878(0): irq FDSR FBUS risc_pc=
[    1.750728] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.752969] RIP: 0010:0x0
[    1.757526] Call Trace:
[    1.757659]  <IRQ>
[    1.757770]  tasklet_action_common.isra.0+0x107/0x110
[    1.758041]  tasklet_action+0x22/0x30
[    1.758237]  __do_softirq+0xe0/0x29b
[    1.758430]  irq_exit_rcu+0xa4/0xb0
[    1.758618]  common_interrupt+0x8d/0xa0
[    1.758824]  </IRQ>

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 79ba15a9385a..69a304e0db11 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -300,7 +300,8 @@ static irqreturn_t bt878_irq(int irq, void *dev_id)
 		}
 		if (astat & BT878_ARISCI) {
 			bt->finished_block = (stat & BT878_ARISCS) >> 28;
-			tasklet_schedule(&bt->tasklet);
+			if (bt->tasklet.callback)
+				tasklet_schedule(&bt->tasklet);
 			break;
 		}
 		count++;
-- 
2.30.2

[PATCH AUTOSEL 5.10 36/70] media: em28xx: Fix possible memory leak of em28xx struct

[Sasha Levin]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

[ Upstream commit ac5688637144644f06ed1f3c6d4dd8bb7db96020 ]

The em28xx struct kref isn't being decreased after an error in the
em28xx_ir_init, leading to a possible memory leak.

A kref_put and em28xx_shutdown_buttons is added to the error handler code.

Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-input.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 5aa15a7a49de..59529cbf9cd0 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -720,7 +720,8 @@ static int em28xx_ir_init(struct em28xx *dev)
 			dev->board.has_ir_i2c = 0;
 			dev_warn(&dev->intf->dev,
 				 "No i2c IR remote control device found.\n");
-			return -ENODEV;
+			err = -ENODEV;
+			goto ref_put;
 		}
 	}
 
@@ -735,7 +736,7 @@ static int em28xx_ir_init(struct em28xx *dev)
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	if (!ir)
-		return -ENOMEM;
+		goto ref_put;
 	rc = rc_allocate_device(RC_DRIVER_SCANCODE);
 	if (!rc)
 		goto error;
@@ -839,6 +840,9 @@ static int em28xx_ir_init(struct em28xx *dev)
 	dev->ir = NULL;
 	rc_free_device(rc);
 	kfree(ir);
+ref_put:
+	em28xx_shutdown_buttons(dev);
+	kref_put(&dev->ref, em28xx_free_device);
 	return err;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 37/70] media: hantro: Fix .buf_prepare

[Sasha Levin]

From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

[ Upstream commit 082aaecff35fbe1937531057911b1dd1fc6b496e ]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in hantro_g1_h264_dec.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/hantro/hantro_v4l2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
index f5fbdbc4ffdb..5c2ca61add8e 100644
--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -639,7 +639,14 @@ static int hantro_buf_prepare(struct vb2_buffer *vb)
 	ret = hantro_buf_plane_check(vb, pix_fmt);
 	if (ret)
 		return ret;
-	vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->plane_fmt[0].sizeimage);
+
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 38/70] media: cedrus: Fix .buf_prepare

[Sasha Levin]

From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

[ Upstream commit d84b9202d712309840f8b5abee0ed272506563bd ]

The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.

If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in cedrus_h264.c or cedrus_vp8.c.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index 911f607d9b09..16327be904d1 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -449,7 +449,13 @@ static int cedrus_buf_prepare(struct vb2_buffer *vb)
 	if (vb2_plane_size(vb, 0) < pix_fmt->sizeimage)
 		return -EINVAL;
 
-	vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
+	/*
+	 * Buffer's bytesused must be written by driver for CAPTURE buffers.
+	 * (for OUTPUT buffers, if userspace passes 0 bytesused, v4l2-core sets
+	 * it to buffer length).
+	 */
+	if (V4L2_TYPE_IS_CAPTURE(vq->type))
+		vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
 
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.10 39/70] media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release

[Sasha Levin]

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]

A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.

My patch sets the dangling pointer to NULL to provide
robust.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-fh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c
index 684574f58e82..90eec79ee995 100644
--- a/drivers/media/v4l2-core/v4l2-fh.c
+++ b/drivers/media/v4l2-core/v4l2-fh.c
@@ -96,6 +96,7 @@ int v4l2_fh_release(struct file *filp)
 		v4l2_fh_del(fh);
 		v4l2_fh_exit(fh);
 		kfree(fh);
+		filp->private_data = NULL;
 	}
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.10 40/70] media: bt8xx: Fix a missing check bug in bt878_probe

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 1a4520090681853e6b850cbe54b27247a013e0e5 ]

In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is
set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'.
However, this two drivers are separate. The user may not load the
'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet
has not been initialized when 'tasklet_schedule' is called, so it is
necessary to check whether the tasklet is initialized in 'bt878_probe'.

Fix this by adding a check at the end of bt878_probe.

The KASAN's report reveals it:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177-
gdba4159c14ef-dirty #40
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522
 tasklet_action+0x50/0x70 kernel/softirq.c:540
 __do_softirq+0x224/0x92c kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:372 [inline]
 irq_exit+0x15a/0x180 kernel/softirq.c:412
 exiting_irq arch/x86/include/asm/apic.h:535 [inline]
 do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
 </IRQ>
RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline]
RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline]
RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584
Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8
14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad
24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec
RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde
RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000
RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0
RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58
R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000
 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4692a9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f
RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60
R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0
Modules linked in:
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: 0000000000000000
---[ end trace 68e5849c3f77cbb6 ]---
RIP: 0010:          (null)
Code: Bad RIP value.
RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246
RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000
RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774
R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000
R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90
FS:  00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index 69a304e0db11..0705913972c6 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -478,6 +478,9 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btwrite(0, BT878_AINT_MASK);
 	bt878_num++;
 
+	if (!bt->tasklet.func)
+		tasklet_disable(&bt->tasklet);
+
 	return 0;
 
       fail2:
-- 
2.30.2

[PATCH AUTOSEL 5.10 41/70] media: st-hva: Fix potential NULL pointer dereferences

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]

When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index 43f279e2a6a3..cf4c891bf619 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -130,8 +130,7 @@ static irqreturn_t hva_hw_its_irq_thread(int irq, void *arg)
 	ctx_id = (hva->sts_reg & 0xFF00) >> 8;
 	if (ctx_id >= HVA_MAX_INSTANCES) {
 		dev_err(dev, "%s     %s: bad context identifier: %d\n",
-			ctx->name, __func__, ctx_id);
-		ctx->hw_err = true;
+			HVA_PREFIX, __func__, ctx_id);
 		goto out;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 42/70] crypto: hisilicon/sec - fixup 3des minimum key size declaration

[Sasha Levin]

From: Kai Ye <yekai13@huawei.com>

[ Upstream commit 6161f40c630bd7ced5f236cd5fbabec06e47afae ]

Fixup the 3des algorithm  minimum key size declaration.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/sec2/sec_crypto.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 41f1fcacb280..630dcb59ad56 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -1515,11 +1515,11 @@ static struct skcipher_alg sec_skciphers[] = {
 			 AES_BLOCK_SIZE, AES_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("ecb(des3_ede)", sec_setkey_3des_ecb,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, 0)
 
 	SEC_SKCIPHER_ALG("cbc(des3_ede)", sec_setkey_3des_cbc,
-			 SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE,
+			 SEC_DES3_3KEY_SIZE, SEC_DES3_3KEY_SIZE,
 			 DES3_EDE_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE)
 
 	SEC_SKCIPHER_ALG("xts(sm4)", sec_setkey_sm4_xts,
-- 
2.30.2

[PATCH AUTOSEL 5.10 43/70] Makefile: fix GDB warning with CONFIG_RELR

[Sasha Levin]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 27f2a4db76e8d8a8b601fc1c6a7a17f88bd907ab ]

GDB produces the following warning when debugging kernels built with
CONFIG_RELR:

BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'

when loading a kernel built with CONFIG_RELR into GDB. It can also
prevent debugging symbols using such relocations.

Peter sugguests:
  [That flag] means that lld will use dynamic tags and section type
  numbers in the OS-specific range rather than the generic range. The
  kernel itself doesn't care about these numbers; it determines the
  location of the RELR section using symbols defined by a linker script.

Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Suggested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210522012626.2811297-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Makefile                      | 2 +-
 scripts/tools-support-relr.sh | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 7ab22f105a03..67d0816cb997 100644
--- a/Makefile
+++ b/Makefile
@@ -978,7 +978,7 @@ LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
 
 ifeq ($(CONFIG_RELR),y)
-LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr
+LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr --use-android-relr-tags
 endif
 
 # We never want expected sections to be placed heuristically by the
diff --git a/scripts/tools-support-relr.sh b/scripts/tools-support-relr.sh
index 45e8aa360b45..cb55878bd5b8 100755
--- a/scripts/tools-support-relr.sh
+++ b/scripts/tools-support-relr.sh
@@ -7,7 +7,8 @@ trap "rm -f $tmp_file.o $tmp_file $tmp_file.bin" EXIT
 cat << "END" | $CC -c -x c - -o $tmp_file.o >/dev/null 2>&1
 void *p = &p;
 END
-$LD $tmp_file.o -shared -Bsymbolic --pack-dyn-relocs=relr -o $tmp_file
+$LD $tmp_file.o -shared -Bsymbolic --pack-dyn-relocs=relr \
+  --use-android-relr-tags -o $tmp_file
 
 # Despite printing an error message, GNU nm still exits with exit code 0 if it
 # sees a relr section. So we need to check that nothing is printed to stderr.
-- 
2.30.2

[PATCH AUTOSEL 5.10 44/70] media: dvd_usb: memory leak in cinergyt2_fe_attach

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit 9ad1efee086e0e913914fa2b2173efb830bad68c ]

When the driver fails to talk with the hardware with dvb_usb_generic_rw,
it will return an error to dvb_usb_adapter_frontend_init. However, the
driver forgets to free the resource (e.g., struct cinergyt2_fe_state),
which leads to a memory leak.

Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw
fails in cinergyt2_frontend_attach.

backtrace:
  [<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline]
  [<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline]
  [<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271
  [<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74
  [<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
  [<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline]
  [<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline]
  [<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287

Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/cinergyT2-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
index 969a7ec71dff..4116ba5c45fc 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
@@ -78,6 +78,8 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 
 	ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
 	if (ret < 0) {
+		if (adap->fe_adap[0].fe)
+			adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe);
 		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n");
 	}
 	mutex_unlock(&d->data_mutex);
-- 
2.30.2

[PATCH AUTOSEL 5.10 45/70] memstick: rtsx_usb_ms: fix UAF

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 42933c8aa14be1caa9eda41f65cde8a3a95d3e39 ]

This patch fixes the following issues:
1. memstick_free_host() will free the host, so the use of ms_dev(host) after
it will be a problem. To fix this, move memstick_free_host() after when we
are done with ms_dev(host).
2. In rtsx_usb_ms_drv_remove(), pm need to be disabled before we remove
and free host otherwise memstick_check will be called and UAF will
happen.

[   11.351173] BUG: KASAN: use-after-free in rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[   11.357077]  rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[   11.357376]  platform_remove+0x2a/0x50
[   11.367531] Freed by task 298:
[   11.368537]  kfree+0xa4/0x2a0
[   11.368711]  device_release+0x51/0xe0
[   11.368905]  kobject_put+0xa2/0x120
[   11.369090]  rtsx_usb_ms_drv_remove+0x8c/0x140 [rtsx_usb_ms]
[   11.369386]  platform_remove+0x2a/0x50

[   12.038408] BUG: KASAN: use-after-free in __mutex_lock.isra.0+0x3ec/0x7c0
[   12.045432]  mutex_lock+0xc9/0xd0
[   12.046080]  memstick_check+0x6a/0x578 [memstick]
[   12.046509]  process_one_work+0x46d/0x750
[   12.052107] Freed by task 297:
[   12.053115]  kfree+0xa4/0x2a0
[   12.053272]  device_release+0x51/0xe0
[   12.053463]  kobject_put+0xa2/0x120
[   12.053647]  rtsx_usb_ms_drv_remove+0xc4/0x140 [rtsx_usb_ms]
[   12.053939]  platform_remove+0x2a/0x50

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210511163944.1233295-1-ztong0001@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memstick/host/rtsx_usb_ms.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c
index 102dbb8080da..29271ad4728a 100644
--- a/drivers/memstick/host/rtsx_usb_ms.c
+++ b/drivers/memstick/host/rtsx_usb_ms.c
@@ -799,9 +799,9 @@ static int rtsx_usb_ms_drv_probe(struct platform_device *pdev)
 
 	return 0;
 err_out:
-	memstick_free_host(msh);
 	pm_runtime_disable(ms_dev(host));
 	pm_runtime_put_noidle(ms_dev(host));
+	memstick_free_host(msh);
 	return err;
 }
 
@@ -828,9 +828,6 @@ static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
 	}
 	mutex_unlock(&host->host_mutex);
 
-	memstick_remove_host(msh);
-	memstick_free_host(msh);
-
 	/* Balance possible unbalanced usage count
 	 * e.g. unconditional module removal
 	 */
@@ -838,10 +835,11 @@ static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
 		pm_runtime_put(ms_dev(host));
 
 	pm_runtime_disable(ms_dev(host));
-	platform_set_drvdata(pdev, NULL);
-
+	memstick_remove_host(msh);
 	dev_dbg(ms_dev(host),
 		": Realtek USB Memstick controller has been removed\n");
+	memstick_free_host(msh);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.10 46/70] mmc: sdhci-sprd: use sdhci_sprd_writew

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit 961470820021e6f9d74db4837bd6831a1a30341b ]

The sdhci_sprd_writew() was defined by never used in sdhci_ops:

    drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-sprd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 19cbb6171b35..9cd8862e6cbd 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -393,6 +393,7 @@ static void sdhci_sprd_request_done(struct sdhci_host *host,
 static struct sdhci_ops sdhci_sprd_ops = {
 	.read_l = sdhci_sprd_readl,
 	.write_l = sdhci_sprd_writel,
+	.write_w = sdhci_sprd_writew,
 	.write_b = sdhci_sprd_writeb,
 	.set_clock = sdhci_sprd_set_clock,
 	.get_max_clock = sdhci_sprd_get_max_clock,
-- 
2.30.2

[PATCH AUTOSEL 5.10 47/70] mmc: via-sdmmc: add a check against NULL pointer dereference

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ]

Before referencing 'host->data', the driver needs to check whether it is
null pointer, otherwise it will cause a null pointer reference.

This log reveals it:

[   29.355199] BUG: kernel NULL pointer dereference, address:
0000000000000014
[   29.357323] #PF: supervisor write access in kernel mode
[   29.357706] #PF: error_code(0x0002) - not-present page
[   29.358088] PGD 0 P4D 0
[   29.358280] Oops: 0002 [#1] PREEMPT SMP PTI
[   29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-
g70e7f0549188-dirty #102
[   29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.362042] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.363604] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.364651] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.365235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.366170] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.367197] Call Trace:
[   29.367381]  <IRQ>
[   29.367537]  __handle_irq_event_percpu+0x53/0x3e0
[   29.367916]  handle_irq_event_percpu+0x35/0x90
[   29.368247]  handle_irq_event+0x39/0x60
[   29.368632]  handle_fasteoi_irq+0xc2/0x1d0
[   29.368950]  __common_interrupt+0x7f/0x150
[   29.369254]  common_interrupt+0xb4/0xd0
[   29.369547]  </IRQ>
[   29.369708]  asm_common_interrupt+0x1e/0x40
[   29.370016] RIP: 0010:native_safe_halt+0x17/0x20
[   29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00
00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb
f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91
[   29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[   29.372079] RAX: 0000000000000000 RBX: 0000000000000002
RCX: 0000000000000000
[   29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4
RDI: ffffffff85403406
[   29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001
R09: 0000000000000001
[   29.373646] R10: 0000000000000000 R11: 0000000000000001
R12: ffffffff86009188
[   29.374160] R13: 0000000000000000 R14: 0000000000000000
R15: ffff888100258000
[   29.374690]  default_idle+0x9/0x10
[   29.374944]  arch_cpu_idle+0xa/0x10
[   29.375198]  default_idle_call+0x6e/0x250
[   29.375491]  do_idle+0x1f0/0x2d0
[   29.375740]  cpu_startup_entry+0x18/0x20
[   29.376034]  start_secondary+0x11f/0x160
[   29.376328]  secondary_startup_64_no_verify+0xb0/0xbb
[   29.376705] Modules linked in:
[   29.376939] Dumping ftrace buffer:
[   29.377187]    (ftrace buffer empty)
[   29.377460] CR2: 0000000000000014
[   29.377712] ---[ end trace 51a473dffb618c47 ]---
[   29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410
[   29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[   29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[   29.380098] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[   29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[   29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[   29.381653] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[   29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[   29.382697] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[   29.383277] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[   29.384223] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[   29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[   29.385260] Kernel panic - not syncing: Fatal exception in interrupt
[   29.385882] Dumping ftrace buffer:
[   29.386135]    (ftrace buffer empty)
[   29.386401] Kernel Offset: disabled
[   29.386656] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/via-sdmmc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 9b755ea0fa03..f07c71db3caf 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -857,6 +857,9 @@ static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
 {
 	BUG_ON(intmask == 0);
 
+	if (!host->data)
+		return;
+
 	if (intmask & VIA_CRDR_SDSTS_DT)
 		host->data->error = -ETIMEDOUT;
 	else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
-- 
2.30.2

[PATCH AUTOSEL 5.10 48/70] spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.

[Sasha Levin]

From: zpershuai <zpershuai@gmail.com>

[ Upstream commit 95730d5eb73170a6d225a9998c478be273598634 ]

In meson_spifc_probe function, when enable the device pclk clock is
error, it should use clk_disable_unprepare to release the core clock.

Signed-off-by: zpershuai <zpershuai@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/1623562172-22056-1-git-send-email-zpershuai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-meson-spicc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index ecba6b4a5d85..51aef2c6e966 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -725,7 +725,7 @@ static int meson_spicc_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(spicc->pclk);
 	if (ret) {
 		dev_err(&pdev->dev, "pclk clock enable failed\n");
-		goto out_master;
+		goto out_core_clk;
 	}
 
 	device_reset_optional(&pdev->dev);
@@ -764,9 +764,11 @@ static int meson_spicc_probe(struct platform_device *pdev)
 	return 0;
 
 out_clk:
-	clk_disable_unprepare(spicc->core);
 	clk_disable_unprepare(spicc->pclk);
 
+out_core_clk:
+	clk_disable_unprepare(spicc->core);
+
 out_master:
 	spi_master_put(master);
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 49/70] spi: meson-spicc: fix memory leak in meson_spicc_probe

[Sasha Levin]

From: zpershuai <zpershuai@gmail.com>

[ Upstream commit b2d501c13470409ee7613855b17e5e5ec4111e1c ]

when meson_spicc_clk_init returns failed, it should goto the
out_clk label.

Signed-off-by: zpershuai <zpershuai@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/1623562156-21995-1-git-send-email-zpershuai@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-meson-spicc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 51aef2c6e966..b2c4621db34d 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -752,7 +752,7 @@ static int meson_spicc_probe(struct platform_device *pdev)
 	ret = meson_spicc_clk_init(spicc);
 	if (ret) {
 		dev_err(&pdev->dev, "clock registration failed\n");
-		goto out_master;
+		goto out_clk;
 	}
 
 	ret = devm_spi_register_master(&pdev->dev, master);
-- 
2.30.2

[PATCH AUTOSEL 5.10 50/70] crypto: shash - avoid comparing pointers to exported functions under CFI

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 22ca9f4aaf431a9413dcc115dd590123307f274f ]

crypto_shash_alg_has_setkey() is implemented by testing whether the
.setkey() member of a struct shash_alg points to the default version,
called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static
inline, this requires shash_no_setkey() to be exported to modules.

Unfortunately, when building with CFI, function pointers are routed
via CFI stubs which are private to each module (or to the kernel proper)
and so this function pointer comparison may fail spuriously.

Let's fix this by turning crypto_shash_alg_has_setkey() into an out of
line function.

Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/shash.c                 | 18 +++++++++++++++---
 include/crypto/internal/hash.h |  8 +-------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/crypto/shash.c b/crypto/shash.c
index 2e3433ad9762..0a0a50cb694f 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -20,12 +20,24 @@
 
 static const struct crypto_type crypto_shash_type;
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen)
+static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+			   unsigned int keylen)
 {
 	return -ENOSYS;
 }
-EXPORT_SYMBOL_GPL(shash_no_setkey);
+
+/*
+ * Check whether an shash algorithm has a setkey function.
+ *
+ * For CFI compatibility, this must not be an inline function.  This is because
+ * when CFI is enabled, modules won't get the same address for shash_no_setkey
+ * (if it were exported, which inlining would require) as the core kernel will.
+ */
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+	return alg->setkey != shash_no_setkey;
+}
+EXPORT_SYMBOL_GPL(crypto_shash_alg_has_setkey);
 
 static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
 				  unsigned int keylen)
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
index 0a288dddcf5b..25806141db59 100644
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -75,13 +75,7 @@ void crypto_unregister_ahashes(struct ahash_alg *algs, int count);
 int ahash_register_instance(struct crypto_template *tmpl,
 			    struct ahash_instance *inst);
 
-int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
-		    unsigned int keylen);
-
-static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
-{
-	return alg->setkey != shash_no_setkey;
-}
+bool crypto_shash_alg_has_setkey(struct shash_alg *alg);
 
 static inline bool crypto_shash_alg_needs_key(struct shash_alg *alg)
 {
-- 
2.30.2

[PATCH AUTOSEL 5.10 51/70] media: dvb_net: avoid speculation from net slot

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]

The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).

(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.

Yet, fixing it is trivial.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index 89620da983ba..dddebea644bb 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -45,6 +45,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/nospec.h>
 #include <linux/etherdevice.h>
 #include <linux/dvb/net.h>
 #include <linux/uio.h>
@@ -1462,14 +1463,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct dvb_net_if *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (if_num >= DVB_NET_DEVICES_MAX) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		if (!dvbnet->state[if_num]) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
@@ -1522,14 +1529,20 @@ static int dvb_net_do_ioctl(struct file *file,
 		struct net_device *netdev;
 		struct dvb_net_priv *priv_data;
 		struct __dvb_net_if_old *dvbnetif = parg;
+		int if_num = dvbnetif->if_num;
+
+		if (if_num >= DVB_NET_DEVICES_MAX) {
+			ret = -EINVAL;
+			goto ioctl_error;
+		}
+		if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
 
-		if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
-		    !dvbnet->state[dvbnetif->if_num]) {
+		if (!dvbnet->state[if_num]) {
 			ret = -EINVAL;
 			goto ioctl_error;
 		}
 
-		netdev = dvbnet->device[dvbnetif->if_num];
+		netdev = dvbnet->device[if_num];
 
 		priv_data = netdev_priv(netdev);
 		dvbnetif->pid=priv_data->pid;
-- 
2.30.2

[PATCH AUTOSEL 5.10 52/70] media: siano: fix device register error path

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]

As reported by smatch:
	drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list

If an error occur at the end of the registration logic, it won't
drop the device from the list.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/siano/smsdvb-main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/common/siano/smsdvb-main.c b/drivers/media/common/siano/smsdvb-main.c
index ae17407e477a..7cc654bc52d3 100644
--- a/drivers/media/common/siano/smsdvb-main.c
+++ b/drivers/media/common/siano/smsdvb-main.c
@@ -1176,6 +1176,10 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 	return 0;
 
 media_graph_error:
+	mutex_lock(&g_smsdvb_clientslock);
+	list_del(&client->entry);
+	mutex_unlock(&g_smsdvb_clientslock);
+
 	smsdvb_debugfs_release(client);
 
 client_error:
-- 
2.30.2

[PATCH AUTOSEL 5.10 53/70] media: imx-csi: Skip first few frames from a BT.656 source

[Sasha Levin]

From: Steve Longerbeam <slongerbeam@gmail.com>

[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]

Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.

[fabio: fixed checkpatch warning and increased the frame skipping to 20]

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csi.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 21ebf7769696..899d29f4c91a 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -753,9 +753,10 @@ static int csi_setup(struct csi_priv *priv)
 
 static int csi_start(struct csi_priv *priv)
 {
-	struct v4l2_fract *output_fi;
+	struct v4l2_fract *input_fi, *output_fi;
 	int ret;
 
+	input_fi = &priv->frame_interval[CSI_SINK_PAD];
 	output_fi = &priv->frame_interval[priv->active_output_pad];
 
 	/* start upstream */
@@ -764,6 +765,17 @@ static int csi_start(struct csi_priv *priv)
 	if (ret)
 		return ret;
 
+	/* Skip first few frames from a BT.656 source */
+	if (priv->upstream_ep.bus_type == V4L2_MBUS_BT656) {
+		u32 delay_usec, bad_frames = 20;
+
+		delay_usec = DIV_ROUND_UP_ULL((u64)USEC_PER_SEC *
+			input_fi->numerator * bad_frames,
+			input_fi->denominator);
+
+		usleep_range(delay_usec, delay_usec + 1000);
+	}
+
 	if (priv->dest == IPU_CSI_DEST_IDMAC) {
 		ret = csi_idmac_start(priv);
 		if (ret)
-- 
2.30.2

[PATCH AUTOSEL 5.10 54/70] hwmon: (max31790) Report correct current pwm duty cycles

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 897f6339893b741a5d68ae8e2475df65946041c2 ]

The MAX31790 has two sets of registers for pwm duty cycles, one to request
a duty cycle and one to read the actual current duty cycle. Both do not
have to be the same.

When reporting the pwm duty cycle to the user, the actual pwm duty cycle
from pwm duty cycle registers needs to be reported. When setting it, the
pwm target duty cycle needs to be written. Since we don't know the actual
pwm duty cycle after a target pwm duty cycle has been written, set the
valid flag to false to indicate that actual pwm duty cycle should be read
from the chip instead of using cached values.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@ceesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/hwmon/max31790.rst | 3 ++-
 drivers/hwmon/max31790.c         | 6 +++---
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst
index f301385d8cef..54ff0f49e28f 100644
--- a/Documentation/hwmon/max31790.rst
+++ b/Documentation/hwmon/max31790.rst
@@ -39,5 +39,6 @@ fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
 pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 86e6c71db685..8ad7a45bfe68 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -104,7 +104,7 @@ static struct max31790_data *max31790_update_device(struct device *dev)
 				data->tach[NR_CHANNEL + i] = rv;
 			} else {
 				rv = i2c_smbus_read_word_swapped(client,
-						MAX31790_REG_PWMOUT(i));
+						MAX31790_REG_PWM_DUTY_CYCLE(i));
 				if (rv < 0)
 					goto abort;
 				data->pwm[i] = rv;
@@ -299,10 +299,10 @@ static int max31790_write_pwm(struct device *dev, u32 attr, int channel,
 			err = -EINVAL;
 			break;
 		}
-		data->pwm[channel] = val << 8;
+		data->valid = false;
 		err = i2c_smbus_write_word_swapped(client,
 						   MAX31790_REG_PWMOUT(channel),
-						   data->pwm[channel]);
+						   val << 8);
 		break;
 	case hwmon_pwm_enable:
 		fan_config = data->fan_config[channel];
-- 
2.30.2

[PATCH AUTOSEL 5.10 55/70] hwmon: (max31790) Fix pwmX_enable attributes

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 148c847c9e5a54b99850617bf9c143af9a344f92 ]

pwmX_enable supports three possible values:

0: Fan control disabled. Duty cycle is fixed to 0%
1: Fan control enabled, pwm mode. Duty cycle is determined by
   values written into Target Duty Cycle registers.
2: Fan control enabled, rpm mode
   Duty cycle is adjusted such that fan speed matches
   the values in Target Count registers

The current code does not do this; instead, it mixes pwm control
configuration with fan speed monitoring configuration. Worse, it
reports that pwm control would be disabled (pwmX_enable==0) when
it is in fact enabled in pwm mode. Part of the problem may be that
the chip sets the "TACH input enable" bit on its own whenever the
mode bit is set to RPM mode, but that doesn't mean that "TACH input
enable" accurately reflects the pwm mode.

Fix it up and only handle pwm control with the pwmX_enable attributes.
In the documentation, clarify that disabling pwm control (pwmX_enable=0)
sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN
is set together with RPM_MODE.

While at it, only update the configuration register if the configuration
has changed, and only update the cached configuration if updating the
chip configuration was successful.

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/hwmon/max31790.rst |  2 +-
 drivers/hwmon/max31790.c         | 41 ++++++++++++++++++++------------
 2 files changed, 27 insertions(+), 16 deletions(-)

diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst
index 54ff0f49e28f..7b097c3b9b90 100644
--- a/Documentation/hwmon/max31790.rst
+++ b/Documentation/hwmon/max31790.rst
@@ -38,7 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
 pwm[1-6]           RW  read: current pwm duty cycle,
                        write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 8ad7a45bfe68..76aa96f5b984 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -27,6 +27,7 @@
 
 /* Fan Config register bits */
 #define MAX31790_FAN_CFG_RPM_MODE	0x80
+#define MAX31790_FAN_CFG_CTRL_MON	0x10
 #define MAX31790_FAN_CFG_TACH_INPUT_EN	0x08
 #define MAX31790_FAN_CFG_TACH_INPUT	0x01
 
@@ -271,12 +272,12 @@ static int max31790_read_pwm(struct device *dev, u32 attr, int channel,
 		*val = data->pwm[channel] >> 8;
 		return 0;
 	case hwmon_pwm_enable:
-		if (fan_config & MAX31790_FAN_CFG_RPM_MODE)
+		if (fan_config & MAX31790_FAN_CFG_CTRL_MON)
+			*val = 0;
+		else if (fan_config & MAX31790_FAN_CFG_RPM_MODE)
 			*val = 2;
-		else if (fan_config & MAX31790_FAN_CFG_TACH_INPUT_EN)
-			*val = 1;
 		else
-			*val = 0;
+			*val = 1;
 		return 0;
 	default:
 		return -EOPNOTSUPP;
@@ -307,23 +308,33 @@ static int max31790_write_pwm(struct device *dev, u32 attr, int channel,
 	case hwmon_pwm_enable:
 		fan_config = data->fan_config[channel];
 		if (val == 0) {
-			fan_config &= ~(MAX31790_FAN_CFG_TACH_INPUT_EN |
-					MAX31790_FAN_CFG_RPM_MODE);
+			fan_config |= MAX31790_FAN_CFG_CTRL_MON;
+			/*
+			 * Disable RPM mode; otherwise disabling fan speed
+			 * monitoring is not possible.
+			 */
+			fan_config &= ~MAX31790_FAN_CFG_RPM_MODE;
 		} else if (val == 1) {
-			fan_config = (fan_config |
-				      MAX31790_FAN_CFG_TACH_INPUT_EN) &
-				     ~MAX31790_FAN_CFG_RPM_MODE;
+			fan_config &= ~(MAX31790_FAN_CFG_CTRL_MON | MAX31790_FAN_CFG_RPM_MODE);
 		} else if (val == 2) {
-			fan_config |= MAX31790_FAN_CFG_TACH_INPUT_EN |
-				      MAX31790_FAN_CFG_RPM_MODE;
+			fan_config &= ~MAX31790_FAN_CFG_CTRL_MON;
+			/*
+			 * The chip sets MAX31790_FAN_CFG_TACH_INPUT_EN on its
+			 * own if MAX31790_FAN_CFG_RPM_MODE is set.
+			 * Do it here as well to reflect the actual register
+			 * value in the cache.
+			 */
+			fan_config |= (MAX31790_FAN_CFG_RPM_MODE | MAX31790_FAN_CFG_TACH_INPUT_EN);
 		} else {
 			err = -EINVAL;
 			break;
 		}
-		data->fan_config[channel] = fan_config;
-		err = i2c_smbus_write_byte_data(client,
-					MAX31790_REG_FAN_CONFIG(channel),
-					fan_config);
+		if (fan_config != data->fan_config[channel]) {
+			err = i2c_smbus_write_byte_data(client, MAX31790_REG_FAN_CONFIG(channel),
+							fan_config);
+			if (!err)
+				data->fan_config[channel] = fan_config;
+		}
 		break;
 	default:
 		err = -EOPNOTSUPP;
-- 
2.30.2

[PATCH AUTOSEL 5.10 56/70] drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()

[Sasha Levin]

From: Jing Xiangfeng <jingxiangfeng@huawei.com>

[ Upstream commit d96b1b8c9f79b6bb234a31c80972a6f422079376 ]

ddr_perf_probe() misses to call ida_simple_remove() in an error path.
Jump to cpuhp_state_err to fix it.

Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210617122614.166823-1-jingxiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/fsl_imx8_ddr_perf.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c
index 397540a4b799..7f7bc0993670 100644
--- a/drivers/perf/fsl_imx8_ddr_perf.c
+++ b/drivers/perf/fsl_imx8_ddr_perf.c
@@ -623,8 +623,10 @@ static int ddr_perf_probe(struct platform_device *pdev)
 
 	name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME "%d",
 			      num);
-	if (!name)
-		return -ENOMEM;
+	if (!name) {
+		ret = -ENOMEM;
+		goto cpuhp_state_err;
+	}
 
 	pmu->devtype_data = of_device_get_match_data(&pdev->dev);
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 57/70] KVM: PPC: Book3S HV: Fix TLB management on SMT8 POWER9 and POWER10 processors

[Sasha Levin]

From: Suraj Jitindar Singh <sjitindarsingh@gmail.com>

[ Upstream commit 77bbbc0cf84834ed130838f7ac1988567f4d0288 ]

The POWER9 vCPU TLB management code assumes all threads in a core share
a TLB, and that TLBIEL execued by one thread will invalidate TLBs for
all threads. This is not the case for SMT8 capable POWER9 and POWER10
(big core) processors, where the TLB is split between groups of threads.
This results in TLB multi-hits, random data corruption, etc.

Fix this by introducing cpu_first_tlb_thread_sibling etc., to determine
which siblings share TLBs, and use that in the guest TLB flushing code.

[npiggin@gmail.com: add changelog and comment]

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210602040441.3984352-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/cputhreads.h | 30 +++++++++++++++++++++++++++
 arch/powerpc/kvm/book3s_hv.c          | 13 ++++++------
 arch/powerpc/kvm/book3s_hv_builtin.c  |  2 +-
 arch/powerpc/kvm/book3s_hv_rm_mmu.c   |  2 +-
 4 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index 98c8bd155bf9..b167186aaee4 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -98,6 +98,36 @@ static inline int cpu_last_thread_sibling(int cpu)
 	return cpu | (threads_per_core - 1);
 }
 
+/*
+ * tlb_thread_siblings are siblings which share a TLB. This is not
+ * architected, is not something a hypervisor could emulate and a future
+ * CPU may change behaviour even in compat mode, so this should only be
+ * used on PowerNV, and only with care.
+ */
+static inline int cpu_first_tlb_thread_sibling(int cpu)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8))
+		return cpu & ~0x6;	/* Big Core */
+	else
+		return cpu_first_thread_sibling(cpu);
+}
+
+static inline int cpu_last_tlb_thread_sibling(int cpu)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8))
+		return cpu | 0x6;	/* Big Core */
+	else
+		return cpu_last_thread_sibling(cpu);
+}
+
+static inline int cpu_tlb_thread_sibling_step(void)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8))
+		return 2;		/* Big Core */
+	else
+		return 1;
+}
+
 static inline u32 get_tensr(void)
 {
 #ifdef	CONFIG_BOOKE
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 280f7992ae99..18ecffbad9ae 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2578,7 +2578,7 @@ static void radix_flush_cpu(struct kvm *kvm, int cpu, struct kvm_vcpu *vcpu)
 	cpumask_t *cpu_in_guest;
 	int i;
 
-	cpu = cpu_first_thread_sibling(cpu);
+	cpu = cpu_first_tlb_thread_sibling(cpu);
 	if (nested) {
 		cpumask_set_cpu(cpu, &nested->need_tlb_flush);
 		cpu_in_guest = &nested->cpu_in_guest;
@@ -2592,9 +2592,10 @@ static void radix_flush_cpu(struct kvm *kvm, int cpu, struct kvm_vcpu *vcpu)
 	 * the other side is the first smp_mb() in kvmppc_run_core().
 	 */
 	smp_mb();
-	for (i = 0; i < threads_per_core; ++i)
-		if (cpumask_test_cpu(cpu + i, cpu_in_guest))
-			smp_call_function_single(cpu + i, do_nothing, NULL, 1);
+	for (i = cpu; i <= cpu_last_tlb_thread_sibling(cpu);
+					i += cpu_tlb_thread_sibling_step())
+		if (cpumask_test_cpu(i, cpu_in_guest))
+			smp_call_function_single(i, do_nothing, NULL, 1);
 }
 
 static void kvmppc_prepare_radix_vcpu(struct kvm_vcpu *vcpu, int pcpu)
@@ -2625,8 +2626,8 @@ static void kvmppc_prepare_radix_vcpu(struct kvm_vcpu *vcpu, int pcpu)
 	 */
 	if (prev_cpu != pcpu) {
 		if (prev_cpu >= 0 &&
-		    cpu_first_thread_sibling(prev_cpu) !=
-		    cpu_first_thread_sibling(pcpu))
+		    cpu_first_tlb_thread_sibling(prev_cpu) !=
+		    cpu_first_tlb_thread_sibling(pcpu))
 			radix_flush_cpu(kvm, prev_cpu, vcpu);
 		if (nested)
 			nested->prev_cpu[vcpu->arch.nested_vcpu_id] = pcpu;
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 8f58dd20b362..4621905bdd9e 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -893,7 +893,7 @@ void kvmppc_check_need_tlb_flush(struct kvm *kvm, int pcpu,
 	 * Thus we make all 4 threads use the same bit.
 	 */
 	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		pcpu = cpu_first_thread_sibling(pcpu);
+		pcpu = cpu_first_tlb_thread_sibling(pcpu);
 
 	if (nested)
 		need_tlb_flush = &nested->need_tlb_flush;
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 88da2764c1bb..3ddc83d2e849 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -67,7 +67,7 @@ static int global_invalidates(struct kvm *kvm)
 		 * so use the bit for the first thread to represent the core.
 		 */
 		if (cpu_has_feature(CPU_FTR_ARCH_300))
-			cpu = cpu_first_thread_sibling(cpu);
+			cpu = cpu_first_tlb_thread_sibling(cpu);
 		cpumask_clear_cpu(cpu, &kvm->arch.need_tlb_flush);
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 58/70] btrfs: fix error handling in __btrfs_update_delayed_inode

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit bb385bedded3ccbd794559600de4a09448810f4a ]

If we get an error while looking up the inode item we'll simply bail
without cleaning up the delayed node.  This results in this style of
warning happening on commit:

  WARNING: CPU: 0 PID: 76403 at fs/btrfs/delayed-inode.c:1365 btrfs_assert_delayed_root_empty+0x5b/0x90
  CPU: 0 PID: 76403 Comm: fsstress Tainted: G        W         5.13.0-rc1+ #373
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  RIP: 0010:btrfs_assert_delayed_root_empty+0x5b/0x90
  RSP: 0018:ffffb8bb815a7e50 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: ffff95d6d07e1888 RCX: ffff95d6c0fa3000
  RDX: 0000000000000002 RSI: 000000000029e91c RDI: ffff95d6c0fc8060
  RBP: ffff95d6c0fc8060 R08: 00008d6d701a2c1d R09: 0000000000000000
  R10: ffff95d6d1760ea0 R11: 0000000000000001 R12: ffff95d6c15a4d00
  R13: ffff95d6c0fa3000 R14: 0000000000000000 R15: ffffb8bb815a7e90
  FS:  00007f490e8dbb80(0000) GS:ffff95d73bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f6e75555cb0 CR3: 00000001101ce001 CR4: 0000000000370ef0
  Call Trace:
   btrfs_commit_transaction+0x43c/0xb00
   ? finish_wait+0x80/0x80
   ? vfs_fsync_range+0x90/0x90
   iterate_supers+0x8c/0x100
   ksys_sync+0x50/0x90
   __do_sys_sync+0xa/0x10
   do_syscall_64+0x3d/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Because the iref isn't dropped and this leaves an elevated node->count,
so any release just re-queues it onto the delayed inodes list.  Fix this
by going to the out label to handle the proper cleanup of the delayed
node.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-inode.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 4e2cce5ca7f6..3af06ef98b12 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1032,12 +1032,10 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_lookup_inode(trans, root, path, &key, mod);
 	memalloc_nofs_restore(nofs_flag);
-	if (ret > 0) {
-		btrfs_release_path(path);
-		return -ENOENT;
-	} else if (ret < 0) {
-		return ret;
-	}
+	if (ret > 0)
+		ret = -ENOENT;
+	if (ret < 0)
+		goto out;
 
 	leaf = path->nodes[0];
 	inode_item = btrfs_item_ptr(leaf, path->slots[0],
-- 
2.30.2

[PATCH AUTOSEL 5.10 59/70] btrfs: abort transaction if we fail to update the delayed inode

[Sasha Levin]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 04587ad9bef6ce9d510325b4ba9852b6129eebdb ]

If we fail to update the delayed inode we need to abort the transaction,
because we could leave an inode with the improper counts or some other
such corruption behind.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-inode.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 3af06ef98b12..04422d929c23 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1073,6 +1073,14 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 	btrfs_delayed_inode_release_metadata(fs_info, node, (ret < 0));
 	btrfs_release_delayed_inode(node);
 
+	/*
+	 * If we fail to update the delayed inode we need to abort the
+	 * transaction, because we could leave the inode with the improper
+	 * counts behind.
+	 */
+	if (ret && ret != -ENOENT)
+		btrfs_abort_transaction(trans, ret);
+
 	return ret;
 
 search:
-- 
2.30.2

[PATCH AUTOSEL 5.10 60/70] btrfs: sysfs: fix format string for some discard stats

[Sasha Levin]

From: David Sterba <dsterba@suse.com>

[ Upstream commit 8c5ec995616f1202ab92e195fd75d6f60d86f85c ]

The type of discard_bitmap_bytes and discard_extent_bytes is u64 so the
format should be %llu, though the actual values would hardly ever
overflow to negative values.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index 279d9262b676..3bb6b688ece5 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -382,7 +382,7 @@ static ssize_t btrfs_discard_bitmap_bytes_show(struct kobject *kobj,
 {
 	struct btrfs_fs_info *fs_info = discard_to_fs_info(kobj);
 
-	return scnprintf(buf, PAGE_SIZE, "%lld\n",
+	return scnprintf(buf, PAGE_SIZE, "%llu\n",
 			fs_info->discard_ctl.discard_bitmap_bytes);
 }
 BTRFS_ATTR(discard, discard_bitmap_bytes, btrfs_discard_bitmap_bytes_show);
@@ -404,7 +404,7 @@ static ssize_t btrfs_discard_extent_bytes_show(struct kobject *kobj,
 {
 	struct btrfs_fs_info *fs_info = discard_to_fs_info(kobj);
 
-	return scnprintf(buf, PAGE_SIZE, "%lld\n",
+	return scnprintf(buf, PAGE_SIZE, "%llu\n",
 			fs_info->discard_ctl.discard_extent_bytes);
 }
 BTRFS_ATTR(discard, discard_extent_bytes, btrfs_discard_extent_bytes_show);
-- 
2.30.2

[PATCH AUTOSEL 5.10 61/70] btrfs: make Private2 lifespan more consistent

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit 87b4d86baae219a9a79f6b0a1434b2a42fd40d09 ]

Currently we use page Private2 bit to indicate that we have ordered
extent for the page range.

But the lifespan of it is not consistent, during regular writeback path,
there are two locations to clear the same PagePrivate2:

    T ----- Page marked Dirty
    |
    + ----- Page marked Private2, through btrfs_run_dealloc_range()
    |
    + ----- Page cleared Private2, through btrfs_writepage_cow_fixup()
    |       in __extent_writepage_io()
    |       ^^^ Private2 cleared for the first time
    |
    + ----- Page marked Writeback, through btrfs_set_range_writeback()
    |       in __extent_writepage_io().
    |
    + ----- Page cleared Private2, through
    |       btrfs_writepage_endio_finish_ordered()
    |       ^^^ Private2 cleared for the second time.
    |
    + ----- Page cleared Writeback, through
            btrfs_writepage_endio_finish_ordered()

Currently PagePrivate2 is mostly to prevent ordered extent accounting
being executed for both endio and invalidatepage.
Thus only the one who cleared page Private2 is responsible for ordered
extent accounting.

But the fact is, in btrfs_writepage_endio_finish_ordered(), page
Private2 is cleared and ordered extent accounting is executed
unconditionally.

The race prevention only happens through btrfs_invalidatepage(), where
we wait for the page writeback first, before checking the Private2 bit.

This means, Private2 is also protected by Writeback bit, and there is no
need for btrfs_writepage_cow_fixup() to clear Priavte2.

This patch will change btrfs_writepage_cow_fixup() to just check
PagePrivate2, not to clear it.
The clearing will happen in either btrfs_invalidatepage() or
btrfs_writepage_endio_finish_ordered().

This makes the Private2 bit easier to understand, just meaning the page
has unfinished ordered extent attached to it.

And this patch is a hard requirement for the incoming refactoring for
how we finished ordered IO for endio context, as the coming patch will
check Private2 to determine if we need to do the ordered extent
accounting.  Thus this patch is definitely needed or we will hang due to
unfinished ordered extent.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 4f26dae63b64..d0f38d2890a0 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2474,7 +2474,7 @@ int btrfs_writepage_cow_fixup(struct page *page, u64 start, u64 end)
 	struct btrfs_writepage_fixup *fixup;
 
 	/* this page is properly in the ordered list */
-	if (TestClearPagePrivate2(page))
+	if (PagePrivate2(page))
 		return 0;
 
 	/*
-- 
2.30.2

[PATCH AUTOSEL 5.10 62/70] btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit 0528476b6ac7832f31e2ed740a57ae31316b124e ]

[BUG]
With current subpage RW support, the following script can hang the fs
with 64K page size.

 # mkfs.btrfs -f -s 4k $dev
 # mount $dev -o nospace_cache $mnt
 # fsstress -w -n 50 -p 1 -s 1607749395 -d $mnt

The kernel will do an infinite loop in btrfs_punch_hole_lock_range().

[CAUSE]
In btrfs_punch_hole_lock_range() we:

- Truncate page cache range
- Lock extent io tree
- Wait any ordered extents in the range.

We exit the loop until we meet all the following conditions:

- No ordered extent in the lock range
- No page is in the lock range

The latter condition has a pitfall, it only works for sector size ==
PAGE_SIZE case.

While can't handle the following subpage case:

  0       32K     64K     96K     128K
  |       |///////||//////|       ||

lockstart=32K
lockend=96K - 1

In this case, although the range crosses 2 pages,
truncate_pagecache_range() will invalidate no page at all, but only zero
the [32K, 96K) range of the two pages.

Thus filemap_range_has_page(32K, 96K-1) will always return true, thus we
will never meet the loop exit condition.

[FIX]
Fix the problem by doing page alignment for the lock range.

Function filemap_range_has_page() has already handled lend < lstart
case, we only need to round up @lockstart, and round_down @lockend for
truncate_pagecache_range().

This modification should not change any thing for sector size ==
PAGE_SIZE case, as in that case our range is already page aligned.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index ffa48ac98d1e..fdff99afb0be 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2485,6 +2485,17 @@ static int btrfs_punch_hole_lock_range(struct inode *inode,
 				       const u64 lockend,
 				       struct extent_state **cached_state)
 {
+	/*
+	 * For subpage case, if the range is not at page boundary, we could
+	 * have pages at the leading/tailing part of the range.
+	 * This could lead to dead loop since filemap_range_has_page()
+	 * will always return true.
+	 * So here we need to do extra page alignment for
+	 * filemap_range_has_page().
+	 */
+	const u64 page_lockstart = round_up(lockstart, PAGE_SIZE);
+	const u64 page_lockend = round_down(lockend + 1, PAGE_SIZE) - 1;
+
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
 		int ret;
@@ -2505,7 +2516,7 @@ static int btrfs_punch_hole_lock_range(struct inode *inode,
 		    (ordered->file_offset + ordered->num_bytes <= lockstart ||
 		     ordered->file_offset > lockend)) &&
 		     !filemap_range_has_page(inode->i_mapping,
-					     lockstart, lockend)) {
+					     page_lockstart, page_lockend)) {
 			if (ordered)
 				btrfs_put_ordered_extent(ordered);
 			break;
-- 
2.30.2

[PATCH AUTOSEL 5.10 63/70] btrfs: don't clear page extent mapped if we're not invalidating the full page

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit bcd77455d590eaa0422a5e84ae852007cfce574a ]

[BUG]
With current btrfs subpage rw support, the following script can lead to
fs hang:

  $ mkfs.btrfs -f -s 4k $dev
  $ mount $dev -o nospace_cache $mnt
  $ fsstress -w -n 100 -p 1 -s 1608140256 -v -d $mnt

The fs will hang at btrfs_start_ordered_extent().

[CAUSE]
In above test case, btrfs_invalidate() will be called with the following
parameters:

  offset = 0 length = 53248 page dirty = 1 subpage dirty bitmap = 0x2000

Since @offset is 0, btrfs_invalidate() will try to invalidate the full
page, and finally call clear_page_extent_mapped() which will detach
subpage structure from the page.

And since the page no longer has subpage structure, the subpage dirty
bitmap will be cleared, preventing the dirty range from being written
back, thus no way to wake up the ordered extent.

[FIX]
Just follow other filesystems, only to invalidate the page if the range
covers the full page.

There are cases like truncate_setsize() which can call
btrfs_invalidatepage() with offset == 0 and length != 0 for the last
page of an inode.

Although the old code will still try to invalidate the full page, we are
still safe to just wait for ordered extent to finish.
So it shouldn't cause extra problems.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d0f38d2890a0..64274d3c4db5 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8213,7 +8213,19 @@ static void btrfs_invalidatepage(struct page *page, unsigned int offset,
 	 */
 	wait_on_page_writeback(page);
 
-	if (offset) {
+	/*
+	 * For subpage case, we have call sites like
+	 * btrfs_punch_hole_lock_range() which passes range not aligned to
+	 * sectorsize.
+	 * If the range doesn't cover the full page, we don't need to and
+	 * shouldn't clear page extent mapped, as page->private can still
+	 * record subpage dirty bits for other part of the range.
+	 *
+	 * For cases that can invalidate the full even the range doesn't
+	 * cover the full page, like invalidating the last page, we're
+	 * still safe to wait for ordered extent to finish.
+	 */
+	if (!(offset == 0 && length == PAGE_SIZE)) {
 		btrfs_releasepage(page, GFP_NOFS);
 		return;
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.10 64/70] btrfs: disable build on platforms having page size 256K

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit b05fbcc36be1f8597a1febef4892053a0b2f3f60 ]

With a config having PAGE_SIZE set to 256K, BTRFS build fails
with the following message

  include/linux/compiler_types.h:326:38: error: call to
  '__compiletime_assert_791' declared with attribute error:
  BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0

BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with
256K pages at the time being.

There are two platforms that can select 256K pages:
 - hexagon
 - powerpc

Disable BTRFS when 256K page size is selected. Supporting this would
require changes to the subpage mode that's currently being developed.
Given that 256K is many times larger than page sizes commonly used and
for what the algorithms and structures have been tuned, it's out of
scope and disabling build is a reasonable option.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
index 68b95ad82126..520a0f6a7d9e 100644
--- a/fs/btrfs/Kconfig
+++ b/fs/btrfs/Kconfig
@@ -18,6 +18,8 @@ config BTRFS_FS
 	select RAID6_PQ
 	select XOR_BLOCKS
 	select SRCU
+	depends on !PPC_256K_PAGES	# powerpc
+	depends on !PAGE_SIZE_256KB	# hexagon
 
 	help
 	  Btrfs is a general purpose copy-on-write filesystem with extents,
-- 
2.30.2

[PATCH AUTOSEL 5.10 65/70] locking/lockdep: Fix the dep path printing for backwards BFS

[Sasha Levin]

From: Boqun Feng <boqun.feng@gmail.com>

[ Upstream commit 69c7a5fb2482636f525f016c8333fdb9111ecb9d ]

We use the same code to print backwards lock dependency path as the
forwards lock dependency path, and this could result into incorrect
printing because for a backwards lock_list ->trace is not the call trace
where the lock of ->class is acquired.

Fix this by introducing a separate function on printing the backwards
dependency path. Also add a few comments about the printing while we are
at it.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-2-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 108 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 106 insertions(+), 2 deletions(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 858b96b438ce..a26a048f2af7 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -2295,7 +2295,56 @@ static void print_lock_class_header(struct lock_class *class, int depth)
 }
 
 /*
- * printk the shortest lock dependencies from @start to @end in reverse order:
+ * Dependency path printing:
+ *
+ * After BFS we get a lock dependency path (linked via ->parent of lock_list),
+ * printing out each lock in the dependency path will help on understanding how
+ * the deadlock could happen. Here are some details about dependency path
+ * printing:
+ *
+ * 1)	A lock_list can be either forwards or backwards for a lock dependency,
+ * 	for a lock dependency A -> B, there are two lock_lists:
+ *
+ * 	a)	lock_list in the ->locks_after list of A, whose ->class is B and
+ * 		->links_to is A. In this case, we can say the lock_list is
+ * 		"A -> B" (forwards case).
+ *
+ * 	b)	lock_list in the ->locks_before list of B, whose ->class is A
+ * 		and ->links_to is B. In this case, we can say the lock_list is
+ * 		"B <- A" (bacwards case).
+ *
+ * 	The ->trace of both a) and b) point to the call trace where B was
+ * 	acquired with A held.
+ *
+ * 2)	A "helper" lock_list is introduced during BFS, this lock_list doesn't
+ * 	represent a certain lock dependency, it only provides an initial entry
+ * 	for BFS. For example, BFS may introduce a "helper" lock_list whose
+ * 	->class is A, as a result BFS will search all dependencies starting with
+ * 	A, e.g. A -> B or A -> C.
+ *
+ * 	The notation of a forwards helper lock_list is like "-> A", which means
+ * 	we should search the forwards dependencies starting with "A", e.g A -> B
+ * 	or A -> C.
+ *
+ * 	The notation of a bacwards helper lock_list is like "<- B", which means
+ * 	we should search the backwards dependencies ending with "B", e.g.
+ * 	B <- A or B <- C.
+ */
+
+/*
+ * printk the shortest lock dependencies from @root to @leaf in reverse order.
+ *
+ * We have a lock dependency path as follow:
+ *
+ *    @root                                                                 @leaf
+ *      |                                                                     |
+ *      V                                                                     V
+ *	          ->parent                                   ->parent
+ * | lock_list | <--------- | lock_list | ... | lock_list  | <--------- | lock_list |
+ * |    -> L1  |            | L1 -> L2  | ... |Ln-2 -> Ln-1|            | Ln-1 -> Ln|
+ *
+ * , so it's natural that we start from @leaf and print every ->class and
+ * ->trace until we reach the @root.
  */
 static void __used
 print_shortest_lock_dependencies(struct lock_list *leaf,
@@ -2323,6 +2372,61 @@ print_shortest_lock_dependencies(struct lock_list *leaf,
 	} while (entry && (depth >= 0));
 }
 
+/*
+ * printk the shortest lock dependencies from @leaf to @root.
+ *
+ * We have a lock dependency path (from a backwards search) as follow:
+ *
+ *    @leaf                                                                 @root
+ *      |                                                                     |
+ *      V                                                                     V
+ *	          ->parent                                   ->parent
+ * | lock_list | ---------> | lock_list | ... | lock_list  | ---------> | lock_list |
+ * | L2 <- L1  |            | L3 <- L2  | ... | Ln <- Ln-1 |            |    <- Ln  |
+ *
+ * , so when we iterate from @leaf to @root, we actually print the lock
+ * dependency path L1 -> L2 -> .. -> Ln in the non-reverse order.
+ *
+ * Another thing to notice here is that ->class of L2 <- L1 is L1, while the
+ * ->trace of L2 <- L1 is the call trace of L2, in fact we don't have the call
+ * trace of L1 in the dependency path, which is alright, because most of the
+ * time we can figure out where L1 is held from the call trace of L2.
+ */
+static void __used
+print_shortest_lock_dependencies_backwards(struct lock_list *leaf,
+					   struct lock_list *root)
+{
+	struct lock_list *entry = leaf;
+	const struct lock_trace *trace = NULL;
+	int depth;
+
+	/*compute depth from generated tree by BFS*/
+	depth = get_lock_depth(leaf);
+
+	do {
+		print_lock_class_header(entry->class, depth);
+		if (trace) {
+			printk("%*s ... acquired at:\n", depth, "");
+			print_lock_trace(trace, 2);
+			printk("\n");
+		}
+
+		/*
+		 * Record the pointer to the trace for the next lock_list
+		 * entry, see the comments for the function.
+		 */
+		trace = entry->trace;
+
+		if (depth == 0 && (entry != root)) {
+			printk("lockdep:%s bad path found in chain graph\n", __func__);
+			break;
+		}
+
+		entry = get_lock_parent(entry);
+		depth--;
+	} while (entry && (depth >= 0));
+}
+
 static void
 print_irq_lock_scenario(struct lock_list *safe_entry,
 			struct lock_list *unsafe_entry,
@@ -2440,7 +2544,7 @@ print_bad_irq_dependency(struct task_struct *curr,
 	prev_root->trace = save_trace();
 	if (!prev_root->trace)
 		return;
-	print_shortest_lock_dependencies(backwards_entry, prev_root);
+	print_shortest_lock_dependencies_backwards(backwards_entry, prev_root);
 
 	pr_warn("\nthe dependencies between the lock to be acquired");
 	pr_warn(" and %s-irq-unsafe lock:\n", irqclass);
-- 
2.30.2

[PATCH AUTOSEL 5.10 66/70] lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()

[Sasha Levin]

From: Boqun Feng <boqun.feng@gmail.com>

[ Upstream commit 7b1f8c6179769af6ffa055e1169610b51d71edd5 ]

In the step #3 of check_irq_usage(), we seach backwards to find a lock
whose usage conflicts the usage of @target_entry1 on safe/unsafe.
However, we should only keep the irq-unsafe usage of @target_entry1 into
consideration, because it could be a case where a lock is hardirq-unsafe
but soft-safe, and in check_irq_usage() we find it because its
hardirq-unsafe could result into a hardirq-safe-unsafe deadlock, but
currently since we don't filter out the other usage bits, so we may find
a lock dependency path softirq-unsafe -> softirq-safe, which in fact
doesn't cause a deadlock. And this may cause misleading lockdep splats.

Fix this by only keeping LOCKF_ENABLED_IRQ_ALL bits when we try the
backwards search.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-4-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index a26a048f2af7..92ef48759e29 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -2762,8 +2762,18 @@ static int check_irq_usage(struct task_struct *curr, struct held_lock *prev,
 	 * Step 3: we found a bad match! Now retrieve a lock from the backward
 	 * list whose usage mask matches the exclusive usage mask from the
 	 * lock found on the forward list.
+	 *
+	 * Note, we should only keep the LOCKF_ENABLED_IRQ_ALL bits, considering
+	 * the follow case:
+	 *
+	 * When trying to add A -> B to the graph, we find that there is a
+	 * hardirq-safe L, that L -> ... -> A, and another hardirq-unsafe M,
+	 * that B -> ... -> M. However M is **softirq-safe**, if we use exact
+	 * invert bits of M's usage_mask, we will find another lock N that is
+	 * **softirq-unsafe** and N -> ... -> A, however N -> .. -> M will not
+	 * cause a inversion deadlock.
 	 */
-	backward_mask = original_mask(target_entry1->class->usage_mask);
+	backward_mask = original_mask(target_entry1->class->usage_mask & LOCKF_ENABLED_IRQ_ALL);
 
 	ret = find_usage_backwards(&this, backward_mask, &target_entry);
 	if (bfs_error(ret)) {
-- 
2.30.2

[PATCH AUTOSEL 5.10 67/70] KVM: s390: get rid of register asm usage

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 4fa3b91bdee1b08348c82660668ca0ca34e271ad ]

Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.

Therefore get rid of register asm statements in kvm code, even though
there is currently nothing wrong with them. This way we know for sure
that this bug class won't be introduced here.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20210621140356.1210771-1-hca@linux.ibm.com
[borntraeger@de.ibm.com: checkpatch strict fix]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/kvm-s390.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 20afffd6b982..f94b4f78d4da 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -327,31 +327,31 @@ static void allow_cpu_feat(unsigned long nr)
 
 static inline int plo_test_bit(unsigned char nr)
 {
-	register unsigned long r0 asm("0") = (unsigned long) nr | 0x100;
+	unsigned long function = (unsigned long)nr | 0x100;
 	int cc;
 
 	asm volatile(
+		"	lgr	0,%[function]\n"
 		/* Parameter registers are ignored for "test bit" */
 		"	plo	0,0,0,0(0)\n"
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (cc)
-		: "d" (r0)
-		: "cc");
+		: [function] "d" (function)
+		: "cc", "0");
 	return cc == 0;
 }
 
 static __always_inline void __insn32_query(unsigned int opcode, u8 *query)
 {
-	register unsigned long r0 asm("0") = 0;	/* query function */
-	register unsigned long r1 asm("1") = (unsigned long) query;
-
 	asm volatile(
-		/* Parameter regs are ignored */
+		"	lghi	0,0\n"
+		"	lgr	1,%[query]\n"
+		/* Parameter registers are ignored */
 		"	.insn	rrf,%[opc] << 16,2,4,6,0\n"
 		:
-		: "d" (r0), "a" (r1), [opc] "i" (opcode)
-		: "cc", "memory");
+		: [query] "d" ((unsigned long)query), [opc] "i" (opcode)
+		: "cc", "memory", "0", "1");
 }
 
 #define INSN_SORTL 0xb938
-- 
2.30.2

[PATCH AUTOSEL 5.10 68/70] regulator: mt6358: Fix vdram2 .vsel_mask

[Sasha Levin]

From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>

[ Upstream commit 50c9462edcbf900f3d5097ca3ad60171346124de ]

The valid vsel value are 0 and 12, so the .vsel_mask should be 0xf.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/1624424169-510-1-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/mt6358-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index 13cb6ac9a892..1d4eb5dc4fac 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -457,7 +457,7 @@ static struct mt6358_regulator_info mt6358_regulators[] = {
 	MT6358_REG_FIXED("ldo_vaud28", VAUD28,
 			 MT6358_LDO_VAUD28_CON0, 0, 2800000),
 	MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
-		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10, 0),
+		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0xf, 0),
 	MT6358_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
 		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
 	MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
-- 
2.30.2

[PATCH AUTOSEL 5.10 69/70] regulator: da9052: Ensure enough delay time for .set_voltage_time_sel

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ]

Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.

Also fix returning negative value when new_sel < old_sel.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/da9052-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index e18d291c7f21..23fa429ebe76 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -250,7 +250,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	case DA9052_ID_BUCK3:
 	case DA9052_ID_LDO2:
 	case DA9052_ID_LDO3:
-		ret = (new_sel - old_sel) * info->step_uV / 6250;
+		ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV,
+				   6250);
 		break;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.10 70/70] media: Fix Media Controller API config checks

[Sasha Levin]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit 50e7a31d30e8221632675abed3be306382324ca2 ]

Smatch static checker warns that "mdev" can be null:

sound/usb/media.c:287 snd_media_device_create()
    warn: 'mdev' can also be NULL

If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.

The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.

sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o

select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
       (MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)

The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.

 #if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)

This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.

Fix the problem requires two changes:

1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
   as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
   the check unchanged to be consistent with drivers/media/Makefile.

2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
   in mc-objs when CONFIG_USB is enabled.

Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/mc/Makefile           | 2 +-
 include/media/media-dev-allocator.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/mc/Makefile b/drivers/media/mc/Makefile
index 119037f0e686..2b7af42ba59c 100644
--- a/drivers/media/mc/Makefile
+++ b/drivers/media/mc/Makefile
@@ -3,7 +3,7 @@
 mc-objs	:= mc-device.o mc-devnode.o mc-entity.o \
 	   mc-request.o
 
-ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_USB),)
 	mc-objs += mc-dev-allocator.o
 endif
 
diff --git a/include/media/media-dev-allocator.h b/include/media/media-dev-allocator.h
index b35ea6062596..2ab54d426c64 100644
--- a/include/media/media-dev-allocator.h
+++ b/include/media/media-dev-allocator.h
@@ -19,7 +19,7 @@
 
 struct usb_device;
 
-#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
+#if defined(CONFIG_MEDIA_CONTROLLER) && IS_ENABLED(CONFIG_USB)
 /**
  * media_device_usb_allocate() - Allocate and return struct &media device
  *
-- 
2.30.2