linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices
@ 2021-07-05 15:30 Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 02/26] EDAC/ti: Add missing MODULE_DEVICE_TABLE Sasha Levin
                   ` (24 more replies)
  0 siblings, 25 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dmitry Torokhov, Jiri Kosina, Sasha Levin, linux-input

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit f2145f8dc566c4f3b5a8deb58dcd12bed4e20194 ]

Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 550fff6e41ec..b6740ad773ee 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2299,12 +2299,8 @@ static int hid_device_remove(struct device *dev)
 {
 	struct hid_device *hdev = to_hid_device(dev);
 	struct hid_driver *hdrv;
-	int ret = 0;
 
-	if (down_interruptible(&hdev->driver_input_lock)) {
-		ret = -EINTR;
-		goto end;
-	}
+	down(&hdev->driver_input_lock);
 	hdev->io_started = false;
 
 	hdrv = hdev->driver;
@@ -2319,8 +2315,8 @@ static int hid_device_remove(struct device *dev)
 
 	if (!hdev->io_started)
 		up(&hdev->driver_input_lock);
-end:
-	return ret;
+
+	return 0;
 }
 
 static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 02/26] EDAC/ti: Add missing MODULE_DEVICE_TABLE
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 03/26] ACPI: processor idle: Fix up C-state latency if not ordered Sasha Levin
                   ` (23 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Bixuan Cui, Hulk Robot, Borislav Petkov, Tero Kristo,
	Sasha Levin, linux-edac

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 0a37f32ba5272b2d4ec8c8d0f6b212b81b578f7e ]

The module misses MODULE_DEVICE_TABLE() for of_device_id tables and thus
never autoloads on ID matches.

Add the missing declaration.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tero Kristo <kristo@kernel.org>
Link: https://lkml.kernel.org/r/20210512033727.26701-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/ti_edac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/edac/ti_edac.c b/drivers/edac/ti_edac.c
index 324768946743..9ab9fa0a911b 100644
--- a/drivers/edac/ti_edac.c
+++ b/drivers/edac/ti_edac.c
@@ -197,6 +197,7 @@ static const struct of_device_id ti_edac_of_match[] = {
 	{ .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 },
 	{},
 };
+MODULE_DEVICE_TABLE(of, ti_edac_of_match);
 
 static int _emif_get_id(struct device_node *node)
 {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 03/26] ACPI: processor idle: Fix up C-state latency if not ordered
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 02/26] EDAC/ti: Add missing MODULE_DEVICE_TABLE Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 04/26] hv_utils: Fix passing zero to 'PTR_ERR' warning Sasha Levin
                   ` (22 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mario Limonciello, Prike Liang, Alex Deucher, Rafael J . Wysocki,
	Sasha Levin, linux-acpi

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 65ea8f2c6e230bdf71fed0137cf9e9d1b307db32 ]

Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.

That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.

In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.

To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.

Link: https://gitlab.freedesktop.org/agd5f/linux/-/commit/026d186e4592c1ee9c1cb44295912d0294508725
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/processor_idle.c | 40 +++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index ed56c6d20b08..53ae679c00f0 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -16,6 +16,7 @@
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 #include <linux/sched.h>       /* need_resched() */
+#include <linux/sort.h>
 #include <linux/tick.h>
 #include <linux/cpuidle.h>
 #include <linux/cpu.h>
@@ -540,10 +541,37 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 	return;
 }
 
+static int acpi_cst_latency_cmp(const void *a, const void *b)
+{
+	const struct acpi_processor_cx *x = a, *y = b;
+
+	if (!(x->valid && y->valid))
+		return 0;
+	if (x->latency > y->latency)
+		return 1;
+	if (x->latency < y->latency)
+		return -1;
+	return 0;
+}
+static void acpi_cst_latency_swap(void *a, void *b, int n)
+{
+	struct acpi_processor_cx *x = a, *y = b;
+	u32 tmp;
+
+	if (!(x->valid && y->valid))
+		return;
+	tmp = x->latency;
+	x->latency = y->latency;
+	y->latency = tmp;
+}
+
 static int acpi_processor_power_verify(struct acpi_processor *pr)
 {
 	unsigned int i;
 	unsigned int working = 0;
+	unsigned int last_latency = 0;
+	unsigned int last_type = 0;
+	bool buggy_latency = false;
 
 	pr->power.timer_broadcast_on_state = INT_MAX;
 
@@ -567,12 +595,24 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 		}
 		if (!cx->valid)
 			continue;
+		if (cx->type >= last_type && cx->latency < last_latency)
+			buggy_latency = true;
+		last_latency = cx->latency;
+		last_type = cx->type;
 
 		lapic_timer_check_state(i, pr, cx);
 		tsc_check_state(cx->type);
 		working++;
 	}
 
+	if (buggy_latency) {
+		pr_notice("FW issue: working around C-state latencies out of order\n");
+		sort(&pr->power.states[1], max_cstate,
+		     sizeof(struct acpi_processor_cx),
+		     acpi_cst_latency_cmp,
+		     acpi_cst_latency_swap);
+	}
+
 	lapic_timer_propagate_broadcast(pr);
 
 	return (working);
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 04/26] hv_utils: Fix passing zero to 'PTR_ERR' warning
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 02/26] EDAC/ti: Add missing MODULE_DEVICE_TABLE Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 03/26] ACPI: processor idle: Fix up C-state latency if not ordered Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 05/26] lib: vsprintf: Fix handling of number field widths in vsscanf Sasha Levin
                   ` (21 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: YueHaibing, Wei Liu, Sasha Levin, linux-hyperv

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit c6a8625fa4c6b0a97860d053271660ccedc3d1b3 ]

Sparse warn this:

drivers/hv/hv_util.c:753 hv_timesync_init() warn:
 passing zero to 'PTR_ERR'

Use PTR_ERR_OR_ZERO instead of PTR_ERR to fix this.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210514070116.16800-1-yuehaibing@huawei.com
[ wei: change %ld to %d ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/hv_util.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index e32681ee7b9f..1671f6f9ea80 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -537,8 +537,8 @@ static int hv_timesync_init(struct hv_util_service *srv)
 	 */
 	hv_ptp_clock = ptp_clock_register(&ptp_hyperv_info, NULL);
 	if (IS_ERR_OR_NULL(hv_ptp_clock)) {
-		pr_err("cannot register PTP clock: %ld\n",
-		       PTR_ERR(hv_ptp_clock));
+		pr_err("cannot register PTP clock: %d\n",
+		       PTR_ERR_OR_ZERO(hv_ptp_clock));
 		hv_ptp_clock = NULL;
 	}
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 05/26] lib: vsprintf: Fix handling of number field widths in vsscanf
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (2 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 04/26] hv_utils: Fix passing zero to 'PTR_ERR' warning Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 06/26] ACPI: EC: Make more Asus laptops use ECDT _GPE Sasha Levin
                   ` (20 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Richard Fitzgerald, Petr Mladek, Sasha Levin

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit 900fdc4573766dd43b847b4f54bd4a1ee2bc7360 ]

The existing code attempted to handle numbers by doing a strto[u]l(),
ignoring the field width, and then repeatedly dividing to extract the
field out of the full converted value. If the string contains a run of
valid digits longer than will fit in a long or long long, this would
overflow and no amount of dividing can recover the correct value.

This patch fixes vsscanf() to obey number field widths when parsing
the number.

A new _parse_integer_limit() is added that takes a limit for the number
of characters to parse. The number field conversion in vsscanf is changed
to use this new function.

If a number starts with a radix prefix, the field width  must be long
enough for at last one digit after the prefix. If not, it will be handled
like this:

 sscanf("0x4", "%1i", &i): i=0, scanning continues with the 'x'
 sscanf("0x4", "%2i", &i): i=0, scanning continues with the '4'

This is consistent with the observed behaviour of userland sscanf.

Note that this patch does NOT fix the problem of a single field value
overflowing the target type. So for example:

  sscanf("123456789abcdef", "%x", &i);

Will not produce the correct result because the value obviously overflows
INT_MAX. But sscanf will report a successful conversion.

Note that where a very large number is used to mean "unlimited", the value
INT_MAX is used for consistency with the behaviour of vsnprintf().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-2-rf@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/kstrtox.c  | 13 ++++++--
 lib/kstrtox.h  |  2 ++
 lib/vsprintf.c | 82 +++++++++++++++++++++++++++++---------------------
 3 files changed, 60 insertions(+), 37 deletions(-)

diff --git a/lib/kstrtox.c b/lib/kstrtox.c
index 1006bf70bf74..95c7234ad467 100644
--- a/lib/kstrtox.c
+++ b/lib/kstrtox.c
@@ -39,20 +39,22 @@ const char *_parse_integer_fixup_radix(const char *s, unsigned int *base)
 
 /*
  * Convert non-negative integer string representation in explicitly given radix
- * to an integer.
+ * to an integer. A maximum of max_chars characters will be converted.
+ *
  * Return number of characters consumed maybe or-ed with overflow bit.
  * If overflow occurs, result integer (incorrect) is still returned.
  *
  * Don't you dare use this function.
  */
-unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *p)
+unsigned int _parse_integer_limit(const char *s, unsigned int base, unsigned long long *p,
+				  size_t max_chars)
 {
 	unsigned long long res;
 	unsigned int rv;
 
 	res = 0;
 	rv = 0;
-	while (1) {
+	while (max_chars--) {
 		unsigned int c = *s;
 		unsigned int lc = c | 0x20; /* don't tolower() this line */
 		unsigned int val;
@@ -82,6 +84,11 @@ unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long
 	return rv;
 }
 
+unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *p)
+{
+	return _parse_integer_limit(s, base, p, INT_MAX);
+}
+
 static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
 {
 	unsigned long long _res;
diff --git a/lib/kstrtox.h b/lib/kstrtox.h
index 3b4637bcd254..158c400ca865 100644
--- a/lib/kstrtox.h
+++ b/lib/kstrtox.h
@@ -4,6 +4,8 @@
 
 #define KSTRTOX_OVERFLOW	(1U << 31)
 const char *_parse_integer_fixup_radix(const char *s, unsigned int *base);
+unsigned int _parse_integer_limit(const char *s, unsigned int base, unsigned long long *res,
+				  size_t max_chars);
 unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *res);
 
 #endif
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index fb4af73142b4..2766d1b2c301 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -50,6 +50,31 @@
 #include <linux/string_helpers.h>
 #include "kstrtox.h"
 
+static unsigned long long simple_strntoull(const char *startp, size_t max_chars,
+					   char **endp, unsigned int base)
+{
+	const char *cp;
+	unsigned long long result = 0ULL;
+	size_t prefix_chars;
+	unsigned int rv;
+
+	cp = _parse_integer_fixup_radix(startp, &base);
+	prefix_chars = cp - startp;
+	if (prefix_chars < max_chars) {
+		rv = _parse_integer_limit(cp, base, &result, max_chars - prefix_chars);
+		/* FIXME */
+		cp += (rv & ~KSTRTOX_OVERFLOW);
+	} else {
+		/* Field too short for prefix + digit, skip over without converting */
+		cp = startp + max_chars;
+	}
+
+	if (endp)
+		*endp = (char *)cp;
+
+	return result;
+}
+
 /**
  * simple_strtoull - convert a string to an unsigned long long
  * @cp: The start of the string
@@ -60,18 +85,7 @@
  */
 unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base)
 {
-	unsigned long long result;
-	unsigned int rv;
-
-	cp = _parse_integer_fixup_radix(cp, &base);
-	rv = _parse_integer(cp, base, &result);
-	/* FIXME */
-	cp += (rv & ~KSTRTOX_OVERFLOW);
-
-	if (endp)
-		*endp = (char *)cp;
-
-	return result;
+	return simple_strntoull(cp, INT_MAX, endp, base);
 }
 EXPORT_SYMBOL(simple_strtoull);
 
@@ -106,6 +120,21 @@ long simple_strtol(const char *cp, char **endp, unsigned int base)
 }
 EXPORT_SYMBOL(simple_strtol);
 
+static long long simple_strntoll(const char *cp, size_t max_chars, char **endp,
+				 unsigned int base)
+{
+	/*
+	 * simple_strntoull() safely handles receiving max_chars==0 in the
+	 * case cp[0] == '-' && max_chars == 1.
+	 * If max_chars == 0 we can drop through and pass it to simple_strntoull()
+	 * and the content of *cp is irrelevant.
+	 */
+	if (*cp == '-' && max_chars > 0)
+		return -simple_strntoull(cp + 1, max_chars - 1, endp, base);
+
+	return simple_strntoull(cp, max_chars, endp, base);
+}
+
 /**
  * simple_strtoll - convert a string to a signed long long
  * @cp: The start of the string
@@ -116,10 +145,7 @@ EXPORT_SYMBOL(simple_strtol);
  */
 long long simple_strtoll(const char *cp, char **endp, unsigned int base)
 {
-	if (*cp == '-')
-		return -simple_strtoull(cp + 1, endp, base);
-
-	return simple_strtoull(cp, endp, base);
+	return simple_strntoll(cp, INT_MAX, endp, base);
 }
 EXPORT_SYMBOL(simple_strtoll);
 
@@ -3343,25 +3369,13 @@ int vsscanf(const char *buf, const char *fmt, va_list args)
 			break;
 
 		if (is_sign)
-			val.s = qualifier != 'L' ?
-				simple_strtol(str, &next, base) :
-				simple_strtoll(str, &next, base);
+			val.s = simple_strntoll(str,
+						field_width >= 0 ? field_width : INT_MAX,
+						&next, base);
 		else
-			val.u = qualifier != 'L' ?
-				simple_strtoul(str, &next, base) :
-				simple_strtoull(str, &next, base);
-
-		if (field_width > 0 && next - str > field_width) {
-			if (base == 0)
-				_parse_integer_fixup_radix(str, &base);
-			while (next - str > field_width) {
-				if (is_sign)
-					val.s = div_s64(val.s, base);
-				else
-					val.u = div_u64(val.u, base);
-				--next;
-			}
-		}
+			val.u = simple_strntoull(str,
+						 field_width >= 0 ? field_width : INT_MAX,
+						 &next, base);
 
 		switch (qualifier) {
 		case 'H':	/* that's 'hh' in format */
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 06/26] ACPI: EC: Make more Asus laptops use ECDT _GPE
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (3 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 05/26] lib: vsprintf: Fix handling of number field widths in vsscanf Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 07/26] block_dump: remove block_dump feature in mark_inode_dirty() Sasha Levin
                   ` (19 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Chris Chiu, Jian-Hong Pan, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Chris Chiu <chris.chiu@canonical.com>

[ Upstream commit 6306f0431914beaf220634ad36c08234006571d5 ]

More ASUS laptops have the _GPE define in the DSDT table with a
different value than the _GPE number in the ECDT.

This is causing media keys not working on ASUS X505BA/BP, X542BA/BP

Add model info to the quirks list.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index c64001e789ed..258a8df235cf 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1826,6 +1826,22 @@ static const struct dmi_system_id ec_dmi_table[] __initconst = {
 	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 	DMI_MATCH(DMI_PRODUCT_NAME, "GL702VMK"),}, NULL},
 	{
+	ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X505BA", {
+	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "X505BA"),}, NULL},
+	{
+	ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X505BP", {
+	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "X505BP"),}, NULL},
+	{
+	ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X542BA", {
+	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "X542BA"),}, NULL},
+	{
+	ec_honor_ecdt_gpe, "ASUSTeK COMPUTER INC. X542BP", {
+	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "X542BP"),}, NULL},
+	{
 	ec_honor_ecdt_gpe, "ASUS X550VXK", {
 	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 	DMI_MATCH(DMI_PRODUCT_NAME, "X550VXK"),}, NULL},
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 07/26] block_dump: remove block_dump feature in mark_inode_dirty()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (4 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 06/26] ACPI: EC: Make more Asus laptops use ECDT _GPE Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 08/26] fs: dlm: cancel work sync othercon Sasha Levin
                   ` (18 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: zhangyi (F),
	Jan Kara, Christoph Hellwig, Jens Axboe, Sasha Levin,
	linux-fsdevel

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit 12e0613715e1cf305fffafaf0e89d810d9a85cc0 ]

block_dump is an old debugging interface, one of it's functions is used
to print the information about who write which file on disk. If we
enable block_dump through /proc/sys/vm/block_dump and turn on debug log
level, we can gather information about write process name, target file
name and disk from kernel message. This feature is realized in
block_dump___mark_inode_dirty(), it print above information into kernel
message directly when marking inode dirty, so it is noisy and can easily
trigger log storm. At the same time, get the dentry refcount is also not
safe, we found it will lead to deadlock on ext4 file system with
data=journal mode.

After tracepoints has been introduced into the kernel, we got a
tracepoint in __mark_inode_dirty(), which is a better replacement of
block_dump___mark_inode_dirty(). The only downside is that it only trace
the inode number and not a file name, but it probably doesn't matter
because the original printed file name in block_dump is not accurate in
some cases, and we can still find it through the inode number and device
id. So this patch delete the dirting inode part of block_dump feature.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210313030146.2882027-2-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fs-writeback.c | 25 -------------------------
 1 file changed, 25 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index a2cf2db0d3de..fd6b50582c87 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -2196,28 +2196,6 @@ int dirtytime_interval_handler(struct ctl_table *table, int write,
 	return ret;
 }
 
-static noinline void block_dump___mark_inode_dirty(struct inode *inode)
-{
-	if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
-		struct dentry *dentry;
-		const char *name = "?";
-
-		dentry = d_find_alias(inode);
-		if (dentry) {
-			spin_lock(&dentry->d_lock);
-			name = (const char *) dentry->d_name.name;
-		}
-		printk(KERN_DEBUG
-		       "%s(%d): dirtied inode %lu (%s) on %s\n",
-		       current->comm, task_pid_nr(current), inode->i_ino,
-		       name, inode->i_sb->s_id);
-		if (dentry) {
-			spin_unlock(&dentry->d_lock);
-			dput(dentry);
-		}
-	}
-}
-
 /**
  * __mark_inode_dirty -	internal function
  *
@@ -2277,9 +2255,6 @@ void __mark_inode_dirty(struct inode *inode, int flags)
 	    (dirtytime && (inode->i_state & I_DIRTY_INODE)))
 		return;
 
-	if (unlikely(block_dump))
-		block_dump___mark_inode_dirty(inode);
-
 	spin_lock(&inode->i_lock);
 	if (dirtytime && (inode->i_state & I_DIRTY_INODE))
 		goto out_unlock_inode;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 08/26] fs: dlm: cancel work sync othercon
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (5 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 07/26] block_dump: remove block_dump feature in mark_inode_dirty() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 09/26] random32: Fix implicit truncation warning in prandom_seed_state() Sasha Levin
                   ` (17 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexander Aring, David Teigland, Sasha Levin, cluster-devel

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit c6aa00e3d20c2767ba3f57b64eb862572b9744b3 ]

These rx tx flags arguments are for signaling close_connection() from
which worker they are called. Obviously the receive worker cannot cancel
itself and vice versa for swork. For the othercon the receive worker
should only be used, however to avoid deadlocks we should pass the same
flags as the original close_connection() was called.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/lowcomms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 3951d39b9b75..d9202ba665ce 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -607,7 +607,7 @@ static void close_connection(struct connection *con, bool and_other,
 	}
 	if (con->othercon && and_other) {
 		/* Will only re-enter once. */
-		close_connection(con->othercon, false, true, true);
+		close_connection(con->othercon, false, tx, rx);
 	}
 	if (con->rx_page) {
 		__free_page(con->rx_page);
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 09/26] random32: Fix implicit truncation warning in prandom_seed_state()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (6 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 08/26] fs: dlm: cancel work sync othercon Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 10/26] fs: dlm: fix memory leak when fenced Sasha Levin
                   ` (16 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Richard Fitzgerald, kernel test robot, Petr Mladek, Sasha Levin

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit d327ea15a305024ef0085252fa3657bbb1ce25f5 ]

sparse generates the following warning:

 include/linux/prandom.h:114:45: sparse: sparse: cast truncates bits from
 constant value

This is because the 64-bit seed value is manipulated and then placed in a
u32, causing an implicit cast and truncation. A forced cast to u32 doesn't
prevent this warning, which is reasonable because a typecast doesn't prove
that truncation was expected.

Logical-AND the value with 0xffffffff to make explicit that truncation to
32-bit is intended.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210525122012.6336-3-rf@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/prandom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/prandom.h b/include/linux/prandom.h
index cc1e71334e53..e20339c78a84 100644
--- a/include/linux/prandom.h
+++ b/include/linux/prandom.h
@@ -93,7 +93,7 @@ static inline u32 __seed(u32 x, u32 m)
  */
 static inline void prandom_seed_state(struct rnd_state *state, u64 seed)
 {
-	u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
+	u32 i = ((seed >> 32) ^ (seed << 10) ^ seed) & 0xffffffffUL;
 
 	state->s1 = __seed(i,   2U);
 	state->s2 = __seed(i,   8U);
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 10/26] fs: dlm: fix memory leak when fenced
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (7 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 09/26] random32: Fix implicit truncation warning in prandom_seed_state() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 11/26] ACPICA: Fix memory leak caused by _CID repair function Sasha Levin
                   ` (15 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexander Aring, David Teigland, Sasha Levin, cluster-devel

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 700ab1c363c7b54c9ea3222379b33fc00ab02f7b ]

I got some kmemleak report when a node was fenced. The user space tool
dlm_controld will therefore run some rmdir() in dlm configfs which was
triggering some memleaks. This patch stores the sps and cms attributes
which stores some handling for subdirectories of the configfs cluster
entry and free them if they get released as the parent directory gets
freed.

unreferenced object 0xffff88810d9e3e00 (size 192):
  comm "dlm_controld", pid 342, jiffies 4294698126 (age 55438.801s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 73 70 61 63 65 73 00 00  ........spaces..
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000db8b640b>] make_cluster+0x5d/0x360
    [<000000006a571db4>] configfs_mkdir+0x274/0x730
    [<00000000b094501c>] vfs_mkdir+0x27e/0x340
    [<0000000058b0adaf>] do_mkdirat+0xff/0x1b0
    [<00000000d1ffd156>] do_syscall_64+0x40/0x80
    [<00000000ab1408c8>] entry_SYSCALL_64_after_hwframe+0x44/0xae
unreferenced object 0xffff88810d9e3a00 (size 192):
  comm "dlm_controld", pid 342, jiffies 4294698126 (age 55438.801s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 63 6f 6d 6d 73 00 00 00  ........comms...
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000a7ef6ad2>] make_cluster+0x82/0x360
    [<000000006a571db4>] configfs_mkdir+0x274/0x730
    [<00000000b094501c>] vfs_mkdir+0x27e/0x340
    [<0000000058b0adaf>] do_mkdirat+0xff/0x1b0
    [<00000000d1ffd156>] do_syscall_64+0x40/0x80
    [<00000000ab1408c8>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/config.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index 3b1012a3c439..b7e288cf3f5f 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -78,6 +78,9 @@ struct dlm_cluster {
 	unsigned int cl_new_rsb_count;
 	unsigned int cl_recover_callbacks;
 	char cl_cluster_name[DLM_LOCKSPACE_LEN];
+
+	struct dlm_spaces *sps;
+	struct dlm_comms *cms;
 };
 
 static struct dlm_cluster *config_item_to_cluster(struct config_item *i)
@@ -354,6 +357,9 @@ static struct config_group *make_cluster(struct config_group *g,
 	if (!cl || !sps || !cms)
 		goto fail;
 
+	cl->sps = sps;
+	cl->cms = cms;
+
 	config_group_init_type_name(&cl->group, name, &cluster_type);
 	config_group_init_type_name(&sps->ss_group, "spaces", &spaces_type);
 	config_group_init_type_name(&cms->cs_group, "comms", &comms_type);
@@ -403,6 +409,9 @@ static void drop_cluster(struct config_group *g, struct config_item *i)
 static void release_cluster(struct config_item *i)
 {
 	struct dlm_cluster *cl = config_item_to_cluster(i);
+
+	kfree(cl->sps);
+	kfree(cl->cms);
 	kfree(cl);
 }
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 11/26] ACPICA: Fix memory leak caused by _CID repair function
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (8 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 10/26] fs: dlm: fix memory leak when fenced Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 12/26] ACPI: bus: Call kobject_put() in acpi_init() error path Sasha Levin
                   ` (14 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Erik Kaneda, Shawn Guo, Bob Moore, Rafael J . Wysocki,
	Sasha Levin, linux-acpi, devel

From: Erik Kaneda <erik.kaneda@intel.com>

[ Upstream commit c27bac0314131b11bccd735f7e8415ac6444b667 ]

ACPICA commit 180cb53963aa876c782a6f52cc155d951b26051a

According to the ACPI spec, _CID returns a package containing
hardware ID's. Each element of an ASL package contains a reference
count from the parent package as well as the element itself.

Name (TEST, Package() {
    "String object" // this package element has a reference count of 2
})

A memory leak was caused in the _CID repair function because it did
not decrement the reference count created by the package. Fix the
memory leak by calling acpi_ut_remove_reference on _CID package elements
that represent a hardware ID (_HID).

Link: https://github.com/acpica/acpica/commit/180cb539
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/nsrepair2.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
index 663d85e0adba..b7c408ce340c 100644
--- a/drivers/acpi/acpica/nsrepair2.c
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -375,6 +375,13 @@ acpi_ns_repair_CID(struct acpi_evaluate_info *info,
 
 			(*element_ptr)->common.reference_count =
 			    original_ref_count;
+
+			/*
+			 * The original_element holds a reference from the package object
+			 * that represents _HID. Since a new element was created by _HID,
+			 * remove the reference from the _CID package.
+			 */
+			acpi_ut_remove_reference(original_element);
 		}
 
 		element_ptr++;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 12/26] ACPI: bus: Call kobject_put() in acpi_init() error path
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (9 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 11/26] ACPICA: Fix memory leak caused by _CID repair function Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 13/26] ACPI: resources: Add checks for ACPI IRQ override Sasha Levin
                   ` (13 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hanjun Guo, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Hanjun Guo <guohanjun@huawei.com>

[ Upstream commit 4ac7a817f1992103d4e68e9837304f860b5e7300 ]

Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/bus.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 54002670cb7a..bbd9c93fc4c2 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1240,6 +1240,7 @@ static int __init acpi_init(void)
 
 	result = acpi_bus_init();
 	if (result) {
+		kobject_put(acpi_kobj);
 		disable_acpi();
 		return result;
 	}
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 13/26] ACPI: resources: Add checks for ACPI IRQ override
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (10 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 12/26] ACPI: bus: Call kobject_put() in acpi_init() error path Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 14/26] block: fix race between adding/removing rq qos and normal IO Sasha Levin
                   ` (12 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hui Wang, Rafael J . Wysocki, Manuel Krause, Sasha Levin, linux-acpi

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit 0ec4e55e9f571f08970ed115ec0addc691eda613 ]

The laptop keyboard doesn't work on many MEDION notebooks, but the
keyboard works well under Windows and Unix.

Through debugging, we found this log in the dmesg:

 ACPI: IRQ 1 override to edge, high
 pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

 And we checked the IRQ definition in the DSDT, it is:

    IRQ (Level, ActiveLow, Exclusive, )
        {1}

So the BIOS defines the keyboard IRQ to Level_Low, but the Linux
kernel override it to Edge_High. If the Linux kernel is modified
to skip the IRQ override, the keyboard will work normally.

From the existing comment in acpi_dev_get_irqresource(), the override
function only needs to be called when IRQ() or IRQNoFlags() is used
to populate the resource descriptor, and according to Section 6.4.2.1
of ACPI 6.4 [1], if IRQ() is empty or IRQNoFlags() is used, the IRQ
is High true, edge sensitive and non-shareable. ACPICA also assumes
that to be the case (see acpi_rs_set_irq[] in rsirq.c).

In accordance with the above, check 3 additional conditions
(EdgeSensitive, ActiveHigh and Exclusive) when deciding whether or
not to treat an ACPI_RESOURCE_TYPE_IRQ resource as "legacy", in which
case the IRQ override is applicable to it.

Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject rewrite, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 48ca9a844f06..55c57b703ea3 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -430,6 +430,13 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
 	}
 }
 
+static bool irq_is_legacy(struct acpi_resource_irq *irq)
+{
+	return irq->triggering == ACPI_EDGE_SENSITIVE &&
+		irq->polarity == ACPI_ACTIVE_HIGH &&
+		irq->shareable == ACPI_EXCLUSIVE;
+}
+
 /**
  * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
  * @ares: Input ACPI resource object.
@@ -468,7 +475,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, irq->interrupts[index],
 					 irq->triggering, irq->polarity,
-					 irq->shareable, true);
+					 irq->shareable, irq_is_legacy(irq));
 		break;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		ext_irq = &ares->data.extended_irq;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 14/26] block: fix race between adding/removing rq qos and normal IO
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (11 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 13/26] ACPI: resources: Add checks for ACPI IRQ override Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 15/26] platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard() Sasha Levin
                   ` (11 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ming Lei, Yi Zhang, Bart Van Assche, Jens Axboe, Sasha Levin,
	linux-block

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 2cafe29a8d03f02a3d16193bdaae2f3e82a423f9 ]

Yi reported several kernel panics on:

[16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[16687.163549] pc : __rq_qos_track+0x38/0x60

or

[  997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[  997.850347] pc : __rq_qos_done+0x2c/0x50

Turns out it is caused by race between adding rq qos(wbt) and normal IO
because rq_qos_add can be run when IO is being submitted, fix this issue
by freezing queue before adding/deleting rq qos to queue.

rq_qos_exit() needn't to freeze queue because it is called after queue
has been frozen.

iolatency calls rq_qos_add() during allocating queue, so freezing won't
add delay because queue usage refcount works at atomic mode at that
time.

iocost calls rq_qos_add() when writing cgroup attribute file, that is
fine to freeze queue at that time since we usually freeze queue when
storing to queue sysfs attribute, meantime iocost only exists on the
root cgroup.

wbt_init calls it in blk_register_queue() and queue sysfs attribute
store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ),
the following patch will speedup the queue freezing in wbt_init.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-rq-qos.h | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/block/blk-rq-qos.h b/block/blk-rq-qos.h
index 2bc43e94f4c4..2bcb3495e376 100644
--- a/block/blk-rq-qos.h
+++ b/block/blk-rq-qos.h
@@ -7,6 +7,7 @@
 #include <linux/blk_types.h>
 #include <linux/atomic.h>
 #include <linux/wait.h>
+#include <linux/blk-mq.h>
 
 #include "blk-mq-debugfs.h"
 
@@ -99,8 +100,21 @@ static inline void rq_wait_init(struct rq_wait *rq_wait)
 
 static inline void rq_qos_add(struct request_queue *q, struct rq_qos *rqos)
 {
+	/*
+	 * No IO can be in-flight when adding rqos, so freeze queue, which
+	 * is fine since we only support rq_qos for blk-mq queue.
+	 *
+	 * Reuse ->queue_lock for protecting against other concurrent
+	 * rq_qos adding/deleting
+	 */
+	blk_mq_freeze_queue(q);
+
+	spin_lock_irq(&q->queue_lock);
 	rqos->next = q->rq_qos;
 	q->rq_qos = rqos;
+	spin_unlock_irq(&q->queue_lock);
+
+	blk_mq_unfreeze_queue(q);
 
 	if (rqos->ops->debugfs_attrs)
 		blk_mq_debugfs_register_rqos(rqos);
@@ -110,12 +124,22 @@ static inline void rq_qos_del(struct request_queue *q, struct rq_qos *rqos)
 {
 	struct rq_qos **cur;
 
+	/*
+	 * See comment in rq_qos_add() about freezing queue & using
+	 * ->queue_lock.
+	 */
+	blk_mq_freeze_queue(q);
+
+	spin_lock_irq(&q->queue_lock);
 	for (cur = &q->rq_qos; *cur; cur = &(*cur)->next) {
 		if (*cur == rqos) {
 			*cur = rqos->next;
 			break;
 		}
 	}
+	spin_unlock_irq(&q->queue_lock);
+
+	blk_mq_unfreeze_queue(q);
 
 	blk_mq_debugfs_unregister_rqos(rqos);
 }
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 15/26] platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (12 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 14/26] block: fix race between adding/removing rq qos and normal IO Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 16/26] nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst() Sasha Levin
                   ` (10 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jiapeng Chong, Abaci Robot, Hans de Goede, Sasha Levin,
	platform-driver-x86

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit 28e367127718a9cb85d615a71e152f7acee41bfc ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.

Eliminate the follow smatch warning:

drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/toshiba_acpi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 71a969fc3b20..f202fc0dd1ff 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -2841,6 +2841,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
 
 	if (!dev->info_supported && !dev->system_event_supported) {
 		pr_warn("No hotkey query interface found\n");
+		error = -EINVAL;
 		goto err_remove_filter;
 	}
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 16/26] nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (13 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 15/26] platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 17/26] EDAC/Intel: Do not load EDAC driver when running as a guest Sasha Levin
                   ` (9 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hannes Reinecke, James Smart, Christoph Hellwig, Sasha Levin, linux-nvme

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 2a4a910aa4f0acc428dc8d10227c42e14ed21d10 ]

When parsing a request in nvmet_fc_handle_fcp_rqst() we should not
check for invalid target ports; if we do the command is aborted
from the fcp layer, causing the host to assume a transport error.
Rather we should still forward this request to the nvmet layer, which
will then correctly fail the command with an appropriate error status.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index fc35f7ae67b0..9b07e8c7689a 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -2151,13 +2151,6 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 	u32 xfrlen = be32_to_cpu(cmdiu->data_len);
 	int ret;
 
-	/*
-	 * if there is no nvmet mapping to the targetport there
-	 * shouldn't be requests. just terminate them.
-	 */
-	if (!tgtport->pe)
-		goto transport_error;
-
 	/*
 	 * Fused commands are currently not supported in the linux
 	 * implementation.
@@ -2185,7 +2178,8 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 
 	fod->req.cmd = &fod->cmdiubuf.sqe;
 	fod->req.cqe = &fod->rspiubuf.cqe;
-	fod->req.port = tgtport->pe->port;
+	if (tgtport->pe)
+		fod->req.port = tgtport->pe->port;
 
 	/* clear any response payload */
 	memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 17/26] EDAC/Intel: Do not load EDAC driver when running as a guest
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (14 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 16/26] nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 18/26] PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Sasha Levin
                   ` (8 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Luck, Tony, Borislav Petkov, Sasha Levin, linux-edac

From: "Luck, Tony" <tony.luck@intel.com>

[ Upstream commit f0a029fff4a50eb01648810a77ba1873e829fdd4 ]

There's little to no point in loading an EDAC driver running in a guest:
1) The CPU model reported by CPUID may not represent actual h/w
2) The hypervisor likely does not pass in access to memory controller devices
3) Hypervisors generally do not pass corrected error details to guests

Add a check in each of the Intel EDAC drivers for X86_FEATURE_HYPERVISOR
and simply return -ENODEV in the init routine.

Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210615174419.GA1087688@agluck-desk2.amr.corp.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/i10nm_base.c | 3 +++
 drivers/edac/pnd2_edac.c  | 3 +++
 drivers/edac/sb_edac.c    | 3 +++
 drivers/edac/skx_base.c   | 3 +++
 4 files changed, 12 insertions(+)

diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c
index dfcde7ed9500..f72be5f94e6f 100644
--- a/drivers/edac/i10nm_base.c
+++ b/drivers/edac/i10nm_base.c
@@ -249,6 +249,9 @@ static int __init i10nm_init(void)
 	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
 		return -EBUSY;
 
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
 	id = x86_match_cpu(i10nm_cpuids);
 	if (!id)
 		return -ENODEV;
diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index dac45e2071b3..e054eb038903 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -1555,6 +1555,9 @@ static int __init pnd2_init(void)
 	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
 		return -EBUSY;
 
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
 	id = x86_match_cpu(pnd2_cpuids);
 	if (!id)
 		return -ENODEV;
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index b557a53c75c4..d39f5bfb8bd9 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -3512,6 +3512,9 @@ static int __init sbridge_init(void)
 	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
 		return -EBUSY;
 
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
 	id = x86_match_cpu(sbridge_cpuids);
 	if (!id)
 		return -ENODEV;
diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c
index 77cd370bd62f..b1d717cb8df9 100644
--- a/drivers/edac/skx_base.c
+++ b/drivers/edac/skx_base.c
@@ -605,6 +605,9 @@ static int __init skx_init(void)
 	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
 		return -EBUSY;
 
+	if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+		return -ENODEV;
+
 	id = x86_match_cpu(skx_cpuids);
 	if (!id)
 		return -ENODEV;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 18/26] PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (15 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 17/26] EDAC/Intel: Do not load EDAC driver when running as a guest Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 19/26] clocksource: Retry clock read if long delays detected Sasha Levin
                   ` (7 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Haiyang Zhang, Mohammad Alqayeem, Wei Liu, Sasha Levin,
	linux-hyperv, linux-pci

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit 7d815f4afa87f2032b650ae1bba7534b550a6b8b ]

Add check for hv_is_hyperv_initialized() at the top of
init_hv_pci_drv(), so if the pci-hyperv driver is force-loaded on non
Hyper-V platforms, the init_hv_pci_drv() will exit immediately, without
any side effects, like assignments to hvpci_block_ops, etc.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-and-tested-by: Mohammad Alqayeem <mohammad.alqyeem@nutanix.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1621984653-1210-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index f1f300218fab..8c45d6c32c30 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3121,6 +3121,9 @@ static void __exit exit_hv_pci_drv(void)
 
 static int __init init_hv_pci_drv(void)
 {
+	if (!hv_is_hyperv_initialized())
+		return -ENODEV;
+
 	/* Set the invalid domain number's bit, so it will not be used */
 	set_bit(HVPCI_DOM_INVALID, hvpci_dom_map);
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 19/26] clocksource: Retry clock read if long delays detected
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (16 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 18/26] PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 20/26] ACPI: tables: Add custom DSDT file as makefile prerequisite Sasha Levin
                   ` (6 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Paul E. McKenney, Chris Mason, Thomas Gleixner, Feng Tang,
	Sasha Levin, linux-doc

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit db3a34e17433de2390eb80d436970edcebd0ca3e ]

When the clocksource watchdog marks a clock as unstable, this might be due
to that clock being unstable or it might be due to delays that happen to
occur between the reads of the two clocks.  Yes, interrupts are disabled
across those two reads, but there are no shortage of things that can delay
interrupts-disabled regions of code ranging from SMI handlers to vCPU
preemption.  It would be good to have some indication as to why the clock
was marked unstable.

Therefore, re-read the watchdog clock on either side of the read from the
clock under test.  If the watchdog clock shows an excessive time delta
between its pair of reads, the reads are retried.

The maximum number of retries is specified by a new kernel boot parameter
clocksource.max_cswd_read_retries, which defaults to three, that is, up to
four reads, one initial and up to three retries.  If more than one retry
was required, a message is printed on the console (the occasional single
retry is expected behavior, especially in guest OSes).  If the maximum
number of retries is exceeded, the clock under test will be marked
unstable.  However, the probability of this happening due to various sorts
of delays is quite small.  In addition, the reason (clock-read delays) for
the unstable marking will be apparent.

Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-1-paulmck@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |  6 +++
 kernel/time/clocksource.c                     | 53 ++++++++++++++++---
 2 files changed, 53 insertions(+), 6 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a19ae163c058..dbb68067ba4e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -567,6 +567,12 @@
 			loops can be debugged more effectively on production
 			systems.
 
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
 	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 428beb69426a..6863a054c970 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -124,6 +124,13 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating);
 #define WATCHDOG_INTERVAL (HZ >> 1)
 #define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
 
+/*
+ * Maximum permissible delay between two readouts of the watchdog
+ * clocksource surrounding a read of the clocksource being validated.
+ * This delay could be due to SMIs, NMIs, or to VCPU preemptions.
+ */
+#define WATCHDOG_MAX_SKEW (100 * NSEC_PER_USEC)
+
 static void clocksource_watchdog_work(struct work_struct *work)
 {
 	/*
@@ -184,12 +191,45 @@ void clocksource_mark_unstable(struct clocksource *cs)
 	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
 
+static ulong max_cswd_read_retries = 3;
+module_param(max_cswd_read_retries, ulong, 0644);
+
+static bool cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
+{
+	unsigned int nretries;
+	u64 wd_end, wd_delta;
+	int64_t wd_delay;
+
+	for (nretries = 0; nretries <= max_cswd_read_retries; nretries++) {
+		local_irq_disable();
+		*wdnow = watchdog->read(watchdog);
+		*csnow = cs->read(cs);
+		wd_end = watchdog->read(watchdog);
+		local_irq_enable();
+
+		wd_delta = clocksource_delta(wd_end, *wdnow, watchdog->mask);
+		wd_delay = clocksource_cyc2ns(wd_delta, watchdog->mult,
+					      watchdog->shift);
+		if (wd_delay <= WATCHDOG_MAX_SKEW) {
+			if (nretries > 1 || nretries >= max_cswd_read_retries) {
+				pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",
+					smp_processor_id(), watchdog->name, nretries);
+			}
+			return true;
+		}
+	}
+
+	pr_warn("timekeeping watchdog on CPU%d: %s read-back delay of %lldns, attempt %d, marking unstable\n",
+		smp_processor_id(), watchdog->name, wd_delay, nretries);
+	return false;
+}
+
 static void clocksource_watchdog(struct timer_list *unused)
 {
-	struct clocksource *cs;
 	u64 csnow, wdnow, cslast, wdlast, delta;
-	int64_t wd_nsec, cs_nsec;
 	int next_cpu, reset_pending;
+	int64_t wd_nsec, cs_nsec;
+	struct clocksource *cs;
 
 	spin_lock(&watchdog_lock);
 	if (!watchdog_running)
@@ -206,10 +246,11 @@ static void clocksource_watchdog(struct timer_list *unused)
 			continue;
 		}
 
-		local_irq_disable();
-		csnow = cs->read(cs);
-		wdnow = watchdog->read(watchdog);
-		local_irq_enable();
+		if (!cs_watchdog_read(cs, &csnow, &wdnow)) {
+			/* Clock readout unreliable, so give it up. */
+			__clocksource_unstable(cs);
+			continue;
+		}
 
 		/* Clocksource initialized ? */
 		if (!(cs->flags & CLOCK_SOURCE_WATCHDOG) ||
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 20/26] ACPI: tables: Add custom DSDT file as makefile prerequisite
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (17 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 19/26] clocksource: Retry clock read if long delays detected Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 21/26] HID: wacom: Correct base usage for capacitive ExpressKey status bits Sasha Levin
                   ` (5 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Richard Fitzgerald, Rafael J . Wysocki, Sasha Levin, linux-acpi

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit d1059c1b1146870c52f3dac12cb7b6cbf39ed27f ]

A custom DSDT file is mostly used during development or debugging,
and in that case it is quite likely to want to rebuild the kernel
after changing ONLY the content of the DSDT.

This patch adds the custom DSDT as a prerequisite to tables.o
to ensure a rebuild if the DSDT file is updated. Make will merge
the prerequisites from multiple rules for the same target.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/Makefile | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index ef1ac4d127da..1c81504046d4 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -8,6 +8,11 @@ ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 #
 # ACPI Boot-Time Table Parsing
 #
+ifeq ($(CONFIG_ACPI_CUSTOM_DSDT),y)
+tables.o: $(src)/../../include/$(subst $\",,$(CONFIG_ACPI_CUSTOM_DSDT_FILE)) ;
+
+endif
+
 obj-$(CONFIG_ACPI)		+= tables.o
 obj-$(CONFIG_X86)		+= blacklist.o
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 21/26] HID: wacom: Correct base usage for capacitive ExpressKey status bits
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (18 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 20/26] ACPI: tables: Add custom DSDT file as makefile prerequisite Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 22/26] cifs: fix missing spinlock around update to ses->status Sasha Levin
                   ` (4 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jason Gerecke, Jason Gerecke, Jiri Kosina, Sasha Levin, linux-input

From: Jason Gerecke <killertofu@gmail.com>

[ Upstream commit 424d8237945c6c448c8b3f23885d464fb5685c97 ]

The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/wacom_wac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 195910dd2154..e3835407e8d2 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -122,7 +122,7 @@
 #define WACOM_HID_WD_TOUCHONOFF         (WACOM_HID_UP_WACOMDIGITIZER | 0x0454)
 #define WACOM_HID_WD_BATTERY_LEVEL      (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
 #define WACOM_HID_WD_EXPRESSKEY00       (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
-#define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
+#define WACOM_HID_WD_EXPRESSKEYCAP00    (WACOM_HID_UP_WACOMDIGITIZER | 0x0940)
 #define WACOM_HID_WD_MODE_CHANGE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0980)
 #define WACOM_HID_WD_MUTE_DEVICE        (WACOM_HID_UP_WACOMDIGITIZER | 0x0981)
 #define WACOM_HID_WD_CONTROLPANEL       (WACOM_HID_UP_WACOMDIGITIZER | 0x0982)
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 22/26] cifs: fix missing spinlock around update to ses->status
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (19 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 21/26] HID: wacom: Correct base usage for capacitive ExpressKey status bits Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 23/26] block: fix discard request merge Sasha Levin
                   ` (3 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Steve French, Sasha Levin, linux-cifs, samba-technical

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 0060a4f28a9ef45ae8163c0805e944a2b1546762 ]

In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.

Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsglob.h | 3 ++-
 fs/cifs/connect.c  | 5 ++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b16c994414ab..9c0e348cb00f 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -964,7 +964,7 @@ struct cifs_ses {
 	struct mutex session_mutex;
 	struct TCP_Server_Info *server;	/* pointer to server info */
 	int ses_count;		/* reference counter */
-	enum statusEnum status;
+	enum statusEnum status;  /* updates protected by GlobalMid_Lock */
 	unsigned overrideSecFlg;  /* if non-zero override global sec flags */
 	char *serverOS;		/* name of operating system underlying server */
 	char *serverNOS;	/* name of network operating system of server */
@@ -1814,6 +1814,7 @@ require use of the stronger protocol */
  *	list operations on pending_mid_q and oplockQ
  *      updates to XID counters, multiplex id  and SMB sequence numbers
  *      list operations on global DnotifyReqList
+ *      updates to ses->status
  *  tcp_ses_lock protects:
  *	list operations on tcp and SMB session lists
  *  tcon->open_file_lock protects the list of open files hanging off the tcon
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index ab9eeb5ff8e5..da0720f41ebc 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3049,9 +3049,12 @@ void cifs_put_smb_ses(struct cifs_ses *ses)
 		spin_unlock(&cifs_tcp_ses_lock);
 		return;
 	}
+	spin_unlock(&cifs_tcp_ses_lock);
+
+	spin_lock(&GlobalMid_Lock);
 	if (ses->status == CifsGood)
 		ses->status = CifsExiting;
-	spin_unlock(&cifs_tcp_ses_lock);
+	spin_unlock(&GlobalMid_Lock);
 
 	cifs_free_ipc(ses);
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 23/26] block: fix discard request merge
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (20 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 22/26] cifs: fix missing spinlock around update to ses->status Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 24/26] kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync() Sasha Levin
                   ` (2 subsequent siblings)
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ming Lei, Christoph Hellwig, Wang Shanker, Jens Axboe,
	Sasha Levin, linux-block

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 2705dfb2094777e405e065105e307074af8965c1 ]

ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:

if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))

it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.

Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.

Based on analysis from Wang Shanker.

Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Wang Shanker <shankerwangmiao@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-merge.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index 03959bfe961c..4b022f0c49d2 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -571,10 +571,14 @@ static inline unsigned int blk_rq_get_max_segments(struct request *rq)
 static inline int ll_new_hw_segment(struct request *req, struct bio *bio,
 		unsigned int nr_phys_segs)
 {
-	if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
+	if (blk_integrity_merge_bio(req->q, req, bio) == false)
 		goto no_merge;
 
-	if (blk_integrity_merge_bio(req->q, req, bio) == false)
+	/* discard request merge won't add new segment */
+	if (req_op(req) == REQ_OP_DISCARD)
+		return 1;
+
+	if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
 		goto no_merge;
 
 	/*
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 24/26] kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (21 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 23/26] block: fix discard request merge Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 25/26] ia64: mca_drv: fix incorrect array size calculation Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 26/26] writeback, cgroup: increment isw_nr_in_flight before grabbing an inode Sasha Levin
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Petr Mladek, Oleg Nesterov, Nathan Chancellor, Nick Desaulniers,
	Tejun Heo, Minchan Kim, jenhaochen, Martin Liu, Andrew Morton,
	Linus Torvalds, Sasha Levin

From: Petr Mladek <pmladek@suse.com>

[ Upstream commit d71ba1649fa3c464c51ec7163e4b817345bff2c7 ]

kthread_mod_delayed_work() might race with
kthread_cancel_delayed_work_sync() or another kthread_mod_delayed_work()
call.  The function lets the other operation win when it sees
work->canceling counter set.  And it returns @false.

But it should return @true as it is done by the related workqueue API, see
mod_delayed_work_on().

The reason is that the return value might be used for reference counting.
It has to distinguish the case when the number of queued works has changed
or stayed the same.

The change is safe.  kthread_mod_delayed_work() return value is not
checked anywhere at the moment.

Link: https://lore.kernel.org/r/20210521163526.GA17916@redhat.com
Link: https://lkml.kernel.org/r/20210610133051.15337-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: <jenhaochen@google.com>
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/kthread.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/kernel/kthread.c b/kernel/kthread.c
index 2eb8d7550324..b2bac5d929d2 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1083,14 +1083,14 @@ static bool __kthread_cancel_work(struct kthread_work *work)
  * modify @dwork's timer so that it expires after @delay. If @delay is zero,
  * @work is guaranteed to be queued immediately.
  *
- * Return: %true if @dwork was pending and its timer was modified,
- * %false otherwise.
+ * Return: %false if @dwork was idle and queued, %true otherwise.
  *
  * A special case is when the work is being canceled in parallel.
  * It might be caused either by the real kthread_cancel_delayed_work_sync()
  * or yet another kthread_mod_delayed_work() call. We let the other command
- * win and return %false here. The caller is supposed to synchronize these
- * operations a reasonable way.
+ * win and return %true here. The return value can be used for reference
+ * counting and the number of queued works stays the same. Anyway, the caller
+ * is supposed to synchronize these operations a reasonable way.
  *
  * This function is safe to call from any context including IRQ handler.
  * See __kthread_cancel_work() and kthread_delayed_work_timer_fn()
@@ -1102,13 +1102,15 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
 {
 	struct kthread_work *work = &dwork->work;
 	unsigned long flags;
-	int ret = false;
+	int ret;
 
 	raw_spin_lock_irqsave(&worker->lock, flags);
 
 	/* Do not bother with canceling when never queued. */
-	if (!work->worker)
+	if (!work->worker) {
+		ret = false;
 		goto fast_queue;
+	}
 
 	/* Work must not be used with >1 worker, see kthread_queue_work() */
 	WARN_ON_ONCE(work->worker != worker);
@@ -1126,8 +1128,11 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
 	 * be used for reference counting.
 	 */
 	kthread_cancel_delayed_work_timer(work, &flags);
-	if (work->canceling)
+	if (work->canceling) {
+		/* The number of works in the queue does not change. */
+		ret = true;
 		goto out;
+	}
 	ret = __kthread_cancel_work(work);
 
 fast_queue:
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 25/26] ia64: mca_drv: fix incorrect array size calculation
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (22 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 24/26] kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync() Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 26/26] writeback, cgroup: increment isw_nr_in_flight before grabbing an inode Sasha Levin
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnd Bergmann, Masahiro Yamada, Randy Dunlap, Andrew Morton,
	Linus Torvalds, Sasha Levin, linux-ia64

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit c5f320ff8a79501bb59338278336ec43acb9d7e2 ]

gcc points out a mistake in the mca driver that goes back to before the
git history:

arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
  346 |         for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
      |                                                      ^

This is the same as sizeof(size_t), which is two shorter than the actual
array.  Use the ARRAY_SIZE() macro to get the correct calculation instead.

Link: https://lkml.kernel.org/r/20210514214123.875971-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/mca_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 4d0ab323dee8..2a40268c3d49 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -343,7 +343,7 @@ init_record_index_pools(void)
 
 	/* - 2 - */
 	sect_min_size = sal_log_sect_min_sizes[0];
-	for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
+	for (i = 1; i < ARRAY_SIZE(sal_log_sect_min_sizes); i++)
 		if (sect_min_size > sal_log_sect_min_sizes[i])
 			sect_min_size = sal_log_sect_min_sizes[i];
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH AUTOSEL 5.4 26/26] writeback, cgroup: increment isw_nr_in_flight before grabbing an inode
  2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
                   ` (23 preceding siblings ...)
  2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 25/26] ia64: mca_drv: fix incorrect array size calculation Sasha Levin
@ 2021-07-05 15:30 ` Sasha Levin
  24 siblings, 0 replies; 26+ messages in thread
From: Sasha Levin @ 2021-07-05 15:30 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Roman Gushchin, Jan Kara, Jan Kara, Alexander Viro, Dave Chinner,
	Dennis Zhou, Tejun Heo, Jens Axboe, Andrew Morton,
	Linus Torvalds, Sasha Levin, linux-fsdevel

From: Roman Gushchin <guro@fb.com>

[ Upstream commit 8826ee4fe75051f8cbfa5d4a9aa70565938e724c ]

isw_nr_in_flight is used to determine whether the inode switch queue
should be flushed from the umount path.  Currently it's increased after
grabbing an inode and even scheduling the switch work.  It means the
umount path can walk past cleanup_offline_cgwb() with active inode
references, which can result in a "Busy inodes after unmount." message and
use-after-free issues (with inode->i_sb which gets freed).

Fix it by incrementing isw_nr_in_flight before doing anything with the
inode and decrementing in the case when switching wasn't scheduled.

The problem hasn't yet been seen in the real life and was discovered by
Jan Kara by looking into the code.

Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Jan Kara <jack@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fs-writeback.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index fd6b50582c87..3a0d7b8af141 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -505,6 +505,8 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
 	if (!isw)
 		return;
 
+	atomic_inc(&isw_nr_in_flight);
+
 	/* find and pin the new wb */
 	rcu_read_lock();
 	memcg_css = css_from_id(new_wb_id, &memory_cgrp_subsys);
@@ -535,11 +537,10 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
 	 * Let's continue after I_WB_SWITCH is guaranteed to be visible.
 	 */
 	call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn);
-
-	atomic_inc(&isw_nr_in_flight);
 	return;
 
 out_free:
+	atomic_dec(&isw_nr_in_flight);
 	if (isw->new_wb)
 		wb_put(isw->new_wb);
 	kfree(isw);
-- 
2.30.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2021-07-05 15:34 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-05 15:30 [PATCH AUTOSEL 5.4 01/26] HID: do not use down_interruptible() when unbinding devices Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 02/26] EDAC/ti: Add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 03/26] ACPI: processor idle: Fix up C-state latency if not ordered Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 04/26] hv_utils: Fix passing zero to 'PTR_ERR' warning Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 05/26] lib: vsprintf: Fix handling of number field widths in vsscanf Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 06/26] ACPI: EC: Make more Asus laptops use ECDT _GPE Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 07/26] block_dump: remove block_dump feature in mark_inode_dirty() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 08/26] fs: dlm: cancel work sync othercon Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 09/26] random32: Fix implicit truncation warning in prandom_seed_state() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 10/26] fs: dlm: fix memory leak when fenced Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 11/26] ACPICA: Fix memory leak caused by _CID repair function Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 12/26] ACPI: bus: Call kobject_put() in acpi_init() error path Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 13/26] ACPI: resources: Add checks for ACPI IRQ override Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 14/26] block: fix race between adding/removing rq qos and normal IO Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 15/26] platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 16/26] nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 17/26] EDAC/Intel: Do not load EDAC driver when running as a guest Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 18/26] PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 19/26] clocksource: Retry clock read if long delays detected Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 20/26] ACPI: tables: Add custom DSDT file as makefile prerequisite Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 21/26] HID: wacom: Correct base usage for capacitive ExpressKey status bits Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 22/26] cifs: fix missing spinlock around update to ses->status Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 23/26] block: fix discard request merge Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 24/26] kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync() Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 25/26] ia64: mca_drv: fix incorrect array size calculation Sasha Levin
2021-07-05 15:30 ` [PATCH AUTOSEL 5.4 26/26] writeback, cgroup: increment isw_nr_in_flight before grabbing an inode Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).