From: Randy Dunlap <rdunlap@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: "Randy Dunlap" <rdunlap@infradead.org>,
"Codrin Ciubotariu" <codrin.ciubotariu@microchip.com>,
alsa-devel@alsa-project.org,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>,
"Alexandre Belloni" <alexandre.belloni@free-electrons.com>
Subject: [PATCH v3] ASoC: atmel: ATMEL drivers don't need HAS_DMA
Date: Wed, 7 Jul 2021 14:47:52 -0700 [thread overview]
Message-ID: <20210707214752.3831-1-rdunlap@infradead.org> (raw)
On a config (such as arch/sh/) which does not set HAS_DMA when MMU
is not set, several ATMEL ASoC drivers select symbols that cause
kconfig warnings. There is one "depends on HAS_DMA" which is no longer
needed. Dropping it eliminates the kconfig warnings and still builds
with no problems reported.
Fix the following kconfig warnings:
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_SSC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m]
- SND_ATMEL_SOC_SSC_PDC [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_PDC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_AT91_SOC_SAM9G20_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_SSC_DMA [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m]
WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_SSC_DMA
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && ATMEL_SSC [=m] && HAS_DMA [=n]
Selected by [m]:
- SND_ATMEL_SOC_WM8904 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && I2C [=m]
- SND_AT91_SOC_SAM9X5_WM8731 [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_ATMEL_SOC [=m] && (ARCH_AT91 || COMPILE_TEST [=y]) && ATMEL_SSC [=m] && SND_SOC_I2C_AND_SPI [=m]
Fixes: 3951e4aae2ce ("ASoC: atmel-pcm: dma support based on pcm dmaengine")
Fixes: 18291410557f ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig")
Fixes: 061981ff8cc8 ("ASoC: atmel: properly select dma driver state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Cc: alsa-devel@alsa-project.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
v2: rebase & resend;
drop Cc: to Bo Shen <voice.shen@atmel.com> # bounced
v3: drop "depends on HAS_DMA" (as suggested by Codrin; Thanks)
---
sound/soc/atmel/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- linux-next-20210707.orig/sound/soc/atmel/Kconfig
+++ linux-next-20210707/sound/soc/atmel/Kconfig
@@ -11,7 +11,6 @@ if SND_ATMEL_SOC
config SND_ATMEL_SOC_PDC
bool
- depends on HAS_DMA
config SND_ATMEL_SOC_DMA
bool
next reply other threads:[~2021-07-07 21:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-07 21:47 Randy Dunlap [this message]
2021-07-07 21:59 ` [PATCH v3] ASoC: atmel: ATMEL drivers don't need HAS_DMA Alexandre Belloni
2021-07-08 8:19 ` Codrin.Ciubotariu
2021-07-08 16:50 ` Randy Dunlap
2021-09-02 16:44 ` Geert Uytterhoeven
2021-09-03 19:53 ` Randy Dunlap
2021-09-06 7:14 ` Geert Uytterhoeven
2021-09-08 20:14 ` Randy Dunlap
2021-09-09 7:22 ` Geert Uytterhoeven
2021-09-10 1:53 ` Randy Dunlap
2021-07-12 10:46 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210707214752.3831-1-rdunlap@infradead.org \
--to=rdunlap@infradead.org \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codrin.ciubotariu@microchip.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).