linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v7 3/6] hwmon: sy7636a: Add temperature driver for sy7636a
Date: Thu,  8 Jul 2021 21:58:01 +1000	[thread overview]
Message-ID: <20210708115804.212-3-alistair@alistair23.me> (raw)
In-Reply-To: <20210708115804.212-1-alistair@alistair23.me>

This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/configs/imx_v6_v7_defconfig |   1 +
 drivers/hwmon/Kconfig                |  10 +++
 drivers/hwmon/Makefile               |   1 +
 drivers/hwmon/sy7636a-hwmon.c        | 106 +++++++++++++++++++++++++++
 4 files changed, 118 insertions(+)
 create mode 100644 drivers/hwmon/sy7636a-hwmon.c

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index cd80e85d37cf..e9c0be5629c6 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -227,6 +227,7 @@ CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..6cae12de59cd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1631,6 +1631,16 @@ config SENSORS_SIS5595
 	  This driver can also be built as a module. If so, the module
 	  will be called sis5595.
 
+config SENSORS_SY7636A
+	tristate "Silergy SY7636A"
+	depends on I2C
+	help
+	  If you say yes here you get support for the thermistor readout of
+	  the Silergy SY7636A PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sy7636a-hwmon.
+
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..8b2e09e25b24 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
+obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..4edbee99b693
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,106 @@
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Author: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+struct sy7636a_data {
+	struct sy7636a *sy7636a;
+	struct device *hwmon_dev;
+};
+
+static ssize_t show_temp(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	unsigned int reg_val;
+	signed char temp;
+	int ret;
+	struct sy7636a_data *data = dev_get_drvdata(dev);
+
+	ret = regmap_read(data->sy7636a->regmap,
+			SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	temp = *((signed char*)&reg_val);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", temp);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, S_IRUGO, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+	&sensor_dev_attr_temp0.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+	struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+	struct sy7636a_data *data;
+	int err;
+
+	if (!sy7636a)
+		return -EPROBE_DEFER;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL);
+	if (!data) {
+		return -ENOMEM;
+	}
+
+	data->sy7636a = sy7636a;
+	data->hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+			"sy7636a_temperature", data, sy7636a_groups);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id sy7636a_sensor_id[] = {
+	{ "sy7636a-temperature", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_sensor_id);
+
+static struct platform_driver sy7636a_sensor_driver = {
+	.probe = sy7636a_sensor_probe,
+	.id_table = sy7636a_sensor_id,
+	.driver = {
+		.name = "sy7636a-temperature",
+	},
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
+
-- 
2.31.1


  parent reply	other threads:[~2021-07-08 11:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08 11:57 [PATCH v7 1/6] mfd: sy7636a: Initial commit Alistair Francis
2021-07-08 11:58 ` [PATCH v7 2/6] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-07-20 15:02   ` Lee Jones
2021-07-28  8:23     ` Alistair Francis
2021-08-02  7:55       ` Lee Jones
2021-08-14 11:08   ` Daniel Lezcano
2021-07-08 11:58 ` Alistair Francis [this message]
2021-07-20 14:59   ` [PATCH v7 3/6] hwmon: sy7636a: Add temperature " Lee Jones
2021-08-02  9:48     ` Alistair Francis
2021-07-08 11:58 ` [PATCH v7 4/6] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-07-08 11:58 ` [PATCH v7 5/6] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-07-08 11:58 ` [PATCH v7 6/6] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-07-20 14:53 ` [PATCH v7 1/6] mfd: sy7636a: Initial commit Lee Jones
2021-07-20 15:23   ` Mark Brown
2021-07-20 16:09     ` Lee Jones
2021-07-20 20:26       ` Mark Brown
2021-07-30  6:21         ` Alistair Francis
2021-07-30 11:13           ` Mark Brown
2021-08-02  9:26   ` Alistair Francis
2021-08-02 10:23     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210708115804.212-3-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v7 3/6] hwmon: sy7636a: Add temperature driver for sy7636a' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).