linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
@ 2021-07-10  2:38 Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 02/23] misc/libmasm/module: Fix two use after free in ibmasm_init_one Sasha Levin
                   ` (21 more replies)
  0 siblings, 22 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sherry Sun, Greg Kroah-Hartman, Sasha Levin, linux-serial

From: Sherry Sun <sherry.sun@nxp.com>

[ Upstream commit fcb10ee27fb91b25b68d7745db9817ecea9f1038 ]

We should be very careful about the register values that will be used
for division or modulo operations, althrough the possibility that the
UARTBAUD register value is zero is very low, but we had better to deal
with the "bad data" of hardware in advance to avoid division or modulo
by zero leading to undefined kernel behavior.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210427021226.27468-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/fsl_lpuart.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 1544a7cc76ff..1319f3dd5b70 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1681,6 +1681,9 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
 
 	bd = lpuart32_read(sport->port.membase + UARTBAUD);
 	bd &= UARTBAUD_SBR_MASK;
+	if (!bd)
+		return;
+
 	sbr = bd;
 	uartclk = clk_get_rate(sport->clk);
 	/*
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 02/23] misc/libmasm/module: Fix two use after free in ibmasm_init_one
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 03/23] Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro" Sasha Levin
                   ` (20 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Lv Yunlong, Greg Kroah-Hartman, Sasha Levin

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit 7272b591c4cb9327c43443f67b8fbae7657dd9ae ]

In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.

In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.

My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426170620.10546-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/ibmasm/module.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 6b3bf9ab051d..706decef68a0 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -123,7 +123,7 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	result = ibmasm_init_remote_input_dev(sp);
 	if (result) {
 		dev_err(sp->dev, "Failed to initialize remote queue\n");
-		goto error_send_message;
+		goto error_init_remote;
 	}
 
 	result = ibmasm_send_driver_vpd(sp);
@@ -143,8 +143,9 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 error_send_message:
-	disable_sp_interrupts(sp->base_address);
 	ibmasm_free_remote_input_dev(sp);
+error_init_remote:
+	disable_sp_interrupts(sp->base_address);
 	free_irq(sp->irq, (void *)sp);
 error_request_irq:
 	iounmap(sp->base_address);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 03/23] Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 02/23] misc/libmasm/module: Fix two use after free in ibmasm_init_one Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 04/23] scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology Sasha Levin
                   ` (19 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Sakamoto, Takashi Iwai, Sasha Levin, alsa-devel

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 5d6fb80a142b5994355ce675c517baba6089d199 ]

This reverts commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f.

I've explained that optional FireWire card for d.2 is also built-in to
d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has
'Mackie DJ Mixer' in its model name of configuration ROM. On the other
hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC
and has 'd.Pro' in its model name according to manuals and user
experiences. The former card is not the card for d.2 Pro. They are similar
in appearance but different internally.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/Kconfig       | 4 ++--
 sound/firewire/bebob/bebob.c | 2 +-
 sound/firewire/oxfw/oxfw.c   | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index fdc01466d143..4199cfc4a96a 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -36,7 +36,7 @@ config SND_OXFW
 	   * Mackie(Loud) Onyx-i series (former models)
 	   * Mackie(Loud) Onyx Satellite
 	   * Mackie(Loud) Tapco Link.Firewire
-	   * Mackie(Loud) d.4 pro
+	   * Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 
@@ -91,7 +91,7 @@ config SND_BEBOB
 	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 	  * BridgeCo RDAudio1/Audio5
 	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
-	  * Mackie d.2 (FireWire Option) and d.2 Pro
+	  * Mackie d.2 (optional FireWire card with DM1000 ASIC)
 	  * Stanton FinalScratch 2 (ScratchAmp)
 	  * Tascam IF-FW/DM
 	  * Behringer XENIX UFX 1204/1604
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 088250ff2429..64dca7931272 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -362,7 +362,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
 	SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
 	/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
-	// Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
+	// Mackie, d.2 (optional Firewire card with DM1000).
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
 	/* Stanton, ScratchAmp */
 	SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 2d310bf2f2b2..c700e11ab327 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -320,7 +320,7 @@ static const struct ieee1394_device_id oxfw_id_table[] = {
 	 *  Onyx-i series (former models):	0x081216
 	 *  Mackie Onyx Satellite:		0x00200f
 	 *  Tapco LINK.firewire 4x6:		0x000460
-	 *  d.4 pro:				Unknown
+	 *  d.2 pro/d.4 pro (built-in card):	Unknown
 	 *  U.420:				Unknown
 	 *  U.420d:				Unknown
 	 */
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 04/23] scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 02/23] misc/libmasm/module: Fix two use after free in ibmasm_init_one Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 03/23] Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro" Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 05/23] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path Sasha Levin
                   ` (18 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: James Smart, Justin Tee, Martin K . Petersen, Sasha Levin, linux-scsi

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ]

An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.

In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).

Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 5be938b47f48..b66b1ed6d2af 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1142,6 +1142,15 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			phba->fcf.fcf_redisc_attempted = 0; /* reset */
 			goto out;
 		}
+	} else if (vport->port_state > LPFC_FLOGI &&
+		   vport->fc_flag & FC_PT2PT) {
+		/*
+		 * In a p2p topology, it is possible that discovery has
+		 * already progressed, and this completion can be ignored.
+		 * Recheck the indicated topology.
+		 */
+		if (!sp->cmn.fPort)
+			goto out;
 	}
 
 flogifail:
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 05/23] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (2 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 04/23] scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 06/23] fs/jfs: Fix missing error code in lmLogInit() Sasha Levin
                   ` (17 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christophe JAILLET, Greg Kroah-Hartman, Sasha Levin, linux-serial

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ]

In the probe function, if the final 'serial_config()' fails, 'info' is
leaking.

Add a resource handling path to free this memory.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/serial_cs.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 1a14948c86d6..b9f996d7b6cd 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -305,6 +305,7 @@ static int serial_resume(struct pcmcia_device *link)
 static int serial_probe(struct pcmcia_device *link)
 {
 	struct serial_info *info;
+	int ret;
 
 	dev_dbg(&link->dev, "serial_attach()\n");
 
@@ -319,7 +320,15 @@ static int serial_probe(struct pcmcia_device *link)
 	if (do_sound)
 		link->config_flags |= CONF_ENABLE_SPKR;
 
-	return serial_config(link);
+	ret = serial_config(link);
+	if (ret)
+		goto free_info;
+
+	return 0;
+
+free_info:
+	kfree(info);
+	return ret;
 }
 
 static void serial_detach(struct pcmcia_device *link)
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 06/23] fs/jfs: Fix missing error code in lmLogInit()
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (3 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 05/23] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 07/23] scsi: iscsi: Add iscsi_cls_conn refcount helpers Sasha Levin
                   ` (16 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jiapeng Chong, Abaci Robot, Dave Kleikamp, Sasha Levin, jfs-discussion

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc.

Eliminate the follow smatch warning:

fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_logmgr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index a69bdf2a1085..d19542a88c2c 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -1339,6 +1339,7 @@ int lmLogInit(struct jfs_log * log)
 		} else {
 			if (memcmp(logsuper->uuid, log->uuid, 16)) {
 				jfs_warn("wrong uuid on JFS log device");
+				rc = -EINVAL;
 				goto errout20;
 			}
 			log->size = le32_to_cpu(logsuper->size);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 07/23] scsi: iscsi: Add iscsi_cls_conn refcount helpers
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (4 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 06/23] fs/jfs: Fix missing error code in lmLogInit() Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 08/23] mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE Sasha Levin
                   ` (15 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mike Christie, Lee Duncan, Martin K . Petersen, Sasha Levin,
	open-iscsi, linux-scsi

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ]

There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.

Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c             |  7 ++-----
 drivers/scsi/scsi_transport_iscsi.c | 12 ++++++++++++
 include/scsi/scsi_transport_iscsi.h |  2 ++
 3 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 18b8d86ef74b..0713d02cf112 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1384,7 +1384,6 @@ void iscsi_session_failure(struct iscsi_session *session,
 			   enum iscsi_err err)
 {
 	struct iscsi_conn *conn;
-	struct device *dev;
 
 	spin_lock_bh(&session->frwd_lock);
 	conn = session->leadconn;
@@ -1393,10 +1392,8 @@ void iscsi_session_failure(struct iscsi_session *session,
 		return;
 	}
 
-	dev = get_device(&conn->cls_conn->dev);
+	iscsi_get_conn(conn->cls_conn);
 	spin_unlock_bh(&session->frwd_lock);
-	if (!dev)
-	        return;
 	/*
 	 * if the host is being removed bypass the connection
 	 * recovery initialization because we are going to kill
@@ -1406,7 +1403,7 @@ void iscsi_session_failure(struct iscsi_session *session,
 		iscsi_conn_error_event(conn->cls_conn, err);
 	else
 		iscsi_conn_failure(conn, err);
-	put_device(dev);
+	iscsi_put_conn(conn->cls_conn);
 }
 EXPORT_SYMBOL_GPL(iscsi_session_failure);
 
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 42bc4b71b0ba..e0159e6a1065 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -2328,6 +2328,18 @@ int iscsi_destroy_conn(struct iscsi_cls_conn *conn)
 }
 EXPORT_SYMBOL_GPL(iscsi_destroy_conn);
 
+void iscsi_put_conn(struct iscsi_cls_conn *conn)
+{
+	put_device(&conn->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_put_conn);
+
+void iscsi_get_conn(struct iscsi_cls_conn *conn)
+{
+	get_device(&conn->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_get_conn);
+
 /*
  * iscsi interface functions
  */
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 6183d20a01fb..e673c7c9c5fb 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -437,6 +437,8 @@ extern void iscsi_free_session(struct iscsi_cls_session *session);
 extern int iscsi_destroy_session(struct iscsi_cls_session *session);
 extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
 						int dd_size, uint32_t cid);
+extern void iscsi_put_conn(struct iscsi_cls_conn *conn);
+extern void iscsi_get_conn(struct iscsi_cls_conn *conn);
 extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
 extern void iscsi_unblock_session(struct iscsi_cls_session *session);
 extern void iscsi_block_session(struct iscsi_cls_session *session);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 08/23] mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (5 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 07/23] scsi: iscsi: Add iscsi_cls_conn refcount helpers Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 09/23] USB: core: Avoid WARNings for 0-length descriptor requests Sasha Levin
                   ` (14 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Zou Wei, Hulk Robot, Lee Jones, Sasha Levin, linux-stm32,
	linux-arm-kernel

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 4700ef326556ed74aba188f12396740a8c1c21dd ]

This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/da9052-i2c.c | 1 +
 drivers/mfd/stmpe-i2c.c  | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index 2697ffb08009..2992fd94bc0c 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -118,6 +118,7 @@ static const struct i2c_device_id da9052_i2c_id[] = {
 	{"da9053-bc", DA9053_BC},
 	{}
 };
+MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id dialog_dt_ids[] = {
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index c3f4aab53b07..663a6c1c3d0d 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -107,7 +107,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
 	{ "stmpe2403", STMPE2403 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, stmpe_id);
+MODULE_DEVICE_TABLE(i2c, stmpe_i2c_id);
 
 static struct i2c_driver stmpe_i2c_driver = {
 	.driver = {
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 09/23] USB: core: Avoid WARNings for 0-length descriptor requests
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (6 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 08/23] mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 10/23] ALSA: sb: Fix potential double-free of CSP mixer elements Sasha Levin
                   ` (13 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alan Stern, Johan Hovold, syzbot+7dbcd9ff34dc4ed45240,
	Greg Kroah-Hartman, Sasha Levin, linux-usb

From: Alan Stern <stern@rowland.harvard.edu>

[ Upstream commit 60dfe484cef45293e631b3a6e8995f1689818172 ]

The USB core has utility routines to retrieve various types of
descriptors.  These routines will now provoke a WARN if they are asked
to retrieve 0 bytes (USB "receive" requests must not have zero
length), so avert this by checking the size argument at the start.

CC: Johan Hovold <johan@kernel.org>
Reported-and-tested-by: syzbot+7dbcd9ff34dc4ed45240@syzkaller.appspotmail.com
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210607152307.GD1768031@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/message.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e568325cb6e1..8b6e25f11d87 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -643,6 +643,9 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type,
 	int i;
 	int result;
 
+	if (size <= 0)		/* No point in asking for no data */
+		return -EINVAL;
+
 	memset(buf, 0, size);	/* Make sure we parse really received data */
 
 	for (i = 0; i < 3; ++i) {
@@ -691,6 +694,9 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid,
 	int i;
 	int result;
 
+	if (size <= 0)		/* No point in asking for no data */
+		return -EINVAL;
+
 	for (i = 0; i < 3; ++i) {
 		/* retry on length 0 or stall; some devices are flakey */
 		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 10/23] ALSA: sb: Fix potential double-free of CSP mixer elements
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (7 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 09/23] USB: core: Avoid WARNings for 0-length descriptor requests Sasha Levin
@ 2021-07-10  2:38 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 11/23] powerpc/ps3: Add dma_mask to ps3_dma_region Sasha Levin
                   ` (12 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:38 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Takashi Iwai, Sasha Levin, alsa-devel

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c305366a37441c2ac90b08711cb6f032b43672f2 ]

snd_sb_qsound_destroy() contains the calls of removing the previously
created mixer controls, but it doesn't clear the pointers.  As
snd_sb_qsound_destroy() itself may be repeatedly called via ioctl,
this could lead to double-free potentially.

Fix it by clearing the struct fields properly afterwards.

Link: https://lore.kernel.org/r/20210608140540.17885-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/isa/sb/sb16_csp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 2cc068be7d3b..90fa57ad14c0 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -1086,10 +1086,14 @@ static void snd_sb_qsound_destroy(struct snd_sb_csp * p)
 	card = p->chip->card;	
 	
 	down_write(&card->controls_rwsem);
-	if (p->qsound_switch)
+	if (p->qsound_switch) {
 		snd_ctl_remove(card, p->qsound_switch);
-	if (p->qsound_space)
+		p->qsound_switch = NULL;
+	}
+	if (p->qsound_space) {
 		snd_ctl_remove(card, p->qsound_space);
+		p->qsound_space = NULL;
+	}
 	up_write(&card->controls_rwsem);
 
 	/* cancel pending transfer of QSound parameters */
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 11/23] powerpc/ps3: Add dma_mask to ps3_dma_region
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (8 preceding siblings ...)
  2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 10/23] ALSA: sb: Fix potential double-free of CSP mixer elements Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 12/23] gpio: zynq: Check return value of pm_runtime_get_sync Sasha Levin
                   ` (11 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Geoff Levand, Michael Ellerman, Sasha Levin, linuxppc-dev

From: Geoff Levand <geoff@infradead.org>

[ Upstream commit 9733862e50fdba55e7f1554e4286fcc5302ff28e ]

Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.

Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.

Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format

  ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
  WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
  ps3flash sb_01: ps3stor_setup:193: map DMA region failed

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/ps3.h  |  2 ++
 arch/powerpc/platforms/ps3/mm.c | 12 ++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index a1bc7e758422..2d729b53a556 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -83,6 +83,7 @@ struct ps3_dma_region_ops;
  * @bus_addr: The 'translated' bus address of the region.
  * @len: The length in bytes of the region.
  * @offset: The offset from the start of memory of the region.
+ * @dma_mask: Device dma_mask.
  * @ioid: The IOID of the device who owns this region
  * @chunk_list: Opaque variable used by the ioc page manager.
  * @region_ops: struct ps3_dma_region_ops - dma region operations
@@ -97,6 +98,7 @@ struct ps3_dma_region {
 	enum ps3_dma_region_type region_type;
 	unsigned long len;
 	unsigned long offset;
+	u64 dma_mask;
 
 	/* driver variables  (set by ps3_dma_region_create) */
 	unsigned long bus_addr;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 19bae78b1f25..76cbf1be9962 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -18,6 +18,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
@@ -1132,6 +1133,7 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
 	enum ps3_dma_region_type region_type, void *addr, unsigned long len)
 {
 	unsigned long lpar_addr;
+	int result;
 
 	lpar_addr = addr ? ps3_mm_phys_to_lpar(__pa(addr)) : 0;
 
@@ -1143,6 +1145,16 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
 		r->offset -= map.r1.offset;
 	r->len = len ? len : _ALIGN_UP(map.total, 1 << r->page_size);
 
+	dev->core.dma_mask = &r->dma_mask;
+
+	result = dma_set_mask_and_coherent(&dev->core, DMA_BIT_MASK(32));
+
+	if (result < 0) {
+		dev_err(&dev->core, "%s:%d: dma_set_mask_and_coherent failed: %d\n",
+			__func__, __LINE__, result);
+		return result;
+	}
+
 	switch (dev->dev_type) {
 	case PS3_DEVICE_TYPE_SB:
 		r->region_ops =  (USE_DYNAMIC_DMA)
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 12/23] gpio: zynq: Check return value of pm_runtime_get_sync
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (9 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 11/23] powerpc/ps3: Add dma_mask to ps3_dma_region Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 13/23] ALSA: ppc: fix error return code in snd_pmac_probe() Sasha Levin
                   ` (10 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Srinivas Neeli, Bartosz Golaszewski, Sasha Levin, linux-gpio,
	linux-arm-kernel

From: Srinivas Neeli <srinivas.neeli@xilinx.com>

[ Upstream commit a51b2fb94b04ab71e53a71b9fad03fa826941254 ]

Return value of "pm_runtime_get_sync" API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any warning.

Addresses-Coverity: "check_return"
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-zynq.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 8abeacac5885..ccfdf5a45998 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -764,8 +764,11 @@ static int zynq_gpio_probe(struct platform_device *pdev)
 static int zynq_gpio_remove(struct platform_device *pdev)
 {
 	struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+	int ret;
 
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
 	gpiochip_remove(&gpio->chip);
 	clk_disable_unprepare(gpio->clk);
 	device_set_wakeup_capable(&pdev->dev, 0);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 13/23] ALSA: ppc: fix error return code in snd_pmac_probe()
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (10 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 12/23] gpio: zynq: Check return value of pm_runtime_get_sync Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 14/23] selftests/powerpc: Fix "no_handler" EBB selftest Sasha Levin
                   ` (9 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yang Yingliang, Hulk Robot, Takashi Iwai, Sasha Levin,
	alsa-devel, linuxppc-dev

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 80b9c1be567c3c6bbe0d4b290af578e630485b5d ]

If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails,
snd_pmac_probe() need return error code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616021121.1991502-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/ppc/powermac.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c
index 33c6be9fb388..7c70ba5e2540 100644
--- a/sound/ppc/powermac.c
+++ b/sound/ppc/powermac.c
@@ -90,7 +90,11 @@ static int snd_pmac_probe(struct platform_device *devptr)
 		sprintf(card->shortname, "PowerMac %s", name_ext);
 		sprintf(card->longname, "%s (Dev %d) Sub-frame %d",
 			card->shortname, chip->device_id, chip->subframe);
-		if ( snd_pmac_tumbler_init(chip) < 0 || snd_pmac_tumbler_post_init() < 0)
+		err = snd_pmac_tumbler_init(chip);
+		if (err < 0)
+			goto __error;
+		err = snd_pmac_tumbler_post_init();
+		if (err < 0)
 			goto __error;
 		break;
 	case PMAC_AWACS:
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 14/23] selftests/powerpc: Fix "no_handler" EBB selftest
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (11 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 13/23] ALSA: ppc: fix error return code in snd_pmac_probe() Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 15/23] ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing() Sasha Levin
                   ` (8 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Athira Rajeev, Shirisha Ganta, Michael Ellerman, Sasha Levin,
	linuxppc-dev, linux-kselftest

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ]

The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.

Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
index 8341d7778d5e..87630d44fb4c 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
@@ -50,8 +50,6 @@ static int no_handler_test(void)
 
 	event_close(&event);
 
-	dump_ebb_state();
-
 	/* The real test is that we never took an EBB at 0x0 */
 
 	return 0;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 15/23] ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (12 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 14/23] selftests/powerpc: Fix "no_handler" EBB selftest Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 16/23] ALSA: bebob: add support for ToneWeal FW66 Sasha Levin
                   ` (7 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Zhen Lei, Mark Brown, Sasha Levin, alsa-devel

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 7d3865a10b9ff2669c531d5ddd60bf46b3d48f1e ]

When devm_kcalloc() fails, the error code -ENOMEM should be returned
instead of -EINVAL.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617103729.1918-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b927f9c81d92..e69a7f8b6163 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3394,7 +3394,7 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
 	if (!routes) {
 		dev_err(card->dev,
 			"ASoC: Could not allocate DAPM route table\n");
-		return -EINVAL;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < num_routes; i++) {
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 16/23] ALSA: bebob: add support for ToneWeal FW66
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (13 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 15/23] ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing() Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 17/23] usb: gadget: f_hid: fix endianness issue with descriptors Sasha Levin
                   ` (6 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Sakamoto, Daniel Jozsef, Takashi Iwai, Sasha Levin, alsa-devel

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 50ebe56222bfa0911a932930f9229ee5995508d9 ]

A user of FFADO project reported the issue of ToneWeal FW66. As a result,
the device is identified as one of applications of BeBoB solution.

I note that in the report the device returns contradictory result in plug
discovery process for audio subunit. Fortunately ALSA BeBoB driver doesn't
perform it thus it's likely to handle the device without issues.

I receive no reaction to test request for this patch yet, however it would
be worth to add support for it.

daniel@gibbonmoon:/sys/bus/firewire/devices/fw1$ grep -r . *
Binary file config_rom matches
dev:244:1
guid:0x0023270002000000
hardware_version:0x000002
is_local:0
model:0x020002
model_name:FW66
power/runtime_active_time:0
power/runtime_active_kids:0
power/runtime_usage:0
power/runtime_status:unsupported
power/async:disabled
power/runtime_suspended_time:0
power/runtime_enabled:disabled
power/control:auto
subsystem/drivers_autoprobe:1
uevent:MAJOR=244
uevent:MINOR=1
uevent:DEVNAME=fw1
units:0x00a02d:0x010001
vendor:0x002327
vendor_name:ToneWeal
fw1.0/uevent:MODALIAS=ieee1394:ven00002327mo00020002sp0000A02Dver00010001
fw1.0/power/runtime_active_time:0
fw1.0/power/runtime_active_kids:0
fw1.0/power/runtime_usage:0
fw1.0/power/runtime_status:unsupported
fw1.0/power/async:disabled
fw1.0/power/runtime_suspended_time:0
fw1.0/power/runtime_enabled:disabled
fw1.0/power/control:auto
fw1.0/model:0x020002
fw1.0/rom_index:15
fw1.0/specifier_id:0x00a02d
fw1.0/model_name:FW66
fw1.0/version:0x010001
fw1.0/modalias:ieee1394:ven00002327mo00020002sp0000A02Dver00010001

Cc: Daniel Jozsef <daniel.jozsef@gmail.com>
Reference: https://lore.kernel.org/alsa-devel/20200119164335.GA11974@workstation/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210619083922.16060-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/Kconfig       | 1 +
 sound/firewire/bebob/bebob.c | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index 4199cfc4a96a..850315d1abca 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -117,6 +117,7 @@ config SND_BEBOB
 	  * M-Audio Ozonic/NRV10/ProfireLightBridge
 	  * M-Audio FireWire 1814/ProjectMix IO
 	  * Digidesign Mbox 2 Pro
+	  * ToneWeal FW66
 
           To compile this driver as a module, choose M here: the module
           will be called snd-bebob.
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 64dca7931272..c3c14e383e73 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -60,6 +60,7 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
 #define VEN_MAUDIO1	0x00000d6c
 #define VEN_MAUDIO2	0x000007f5
 #define VEN_DIGIDESIGN	0x00a07e
+#define OUI_SHOUYO	0x002327
 
 #define MODEL_FOCUSRITE_SAFFIRE_BOTH	0x00000000
 #define MODEL_MAUDIO_AUDIOPHILE_BOTH	0x00010060
@@ -461,6 +462,8 @@ static const struct ieee1394_device_id bebob_id_table[] = {
 			    &maudio_special_spec),
 	/* Digidesign Mbox 2 Pro */
 	SND_BEBOB_DEV_ENTRY(VEN_DIGIDESIGN, 0x0000a9, &spec_normal),
+	// Toneweal FW66.
+	SND_BEBOB_DEV_ENTRY(OUI_SHOUYO, 0x020002, &spec_normal),
 	/* IDs are unknown but able to be supported */
 	/*  Apogee, Mini-ME Firewire */
 	/*  Apogee, Mini-DAC Firewire */
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 17/23] usb: gadget: f_hid: fix endianness issue with descriptors
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (14 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 16/23] ALSA: bebob: add support for ToneWeal FW66 Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 18/23] usb: gadget: hid: fix error return code in hid_bind() Sasha Levin
                   ` (5 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ruslan Bilovol, Fabien Chouteau, Segiy Stetsyuk,
	Greg Kroah-Hartman, Sasha Levin, linux-usb

From: Ruslan Bilovol <ruslan.bilovol@gmail.com>

[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]

Running sparse checker it shows warning message about
incorrect endianness used for descriptor initialization:

| f_hid.c:91:43: warning: incorrect type in initializer (different base types)
| f_hid.c:91:43:    expected restricted __le16 [usertype] bcdHID
| f_hid.c:91:43:    got int

Fixing issue with cpu_to_le16() macro, however this is not a real issue
as the value is the same both endians.

Cc: Fabien Chouteau <fabien.chouteau@barco.com>
Cc: Segiy Stetsyuk <serg_stetsuk@ukr.net>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_hid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index a5dae5bb62ab..590e056d3618 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -91,7 +91,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {
 static struct hid_descriptor hidg_desc = {
 	.bLength			= sizeof hidg_desc,
 	.bDescriptorType		= HID_DT_HID,
-	.bcdHID				= 0x0101,
+	.bcdHID				= cpu_to_le16(0x0101),
 	.bCountryCode			= 0x00,
 	.bNumDescriptors		= 0x1,
 	/*.desc[0].bDescriptorType	= DYNAMIC */
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 18/23] usb: gadget: hid: fix error return code in hid_bind()
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (15 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 17/23] usb: gadget: f_hid: fix endianness issue with descriptors Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 19/23] powerpc/boot: Fixup device-tree on little endian Sasha Levin
                   ` (4 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yang Yingliang, Hulk Robot, Greg Kroah-Hartman, Sasha Levin, linux-usb

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]

Fix to return a negative error code from the error handling
case instead of 0.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210618043835.2641360-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/legacy/hid.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index 7e5d2c48476e..97329ba5d382 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -175,8 +175,10 @@ static int hid_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto put;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 19/23] powerpc/boot: Fixup device-tree on little endian
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (16 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 18/23] usb: gadget: hid: fix error return code in hid_bind() Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 20/23] backlight: lm3630a: Fix return code of .update_status() callback Sasha Levin
                   ` (3 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Segher Boessenkool,
	Nicholas Piggin, Michael Ellerman, Sasha Levin, linuxppc-dev

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit c93f80849bdd9b45d834053ae1336e28f0026c84 ]

This fixes the core devtree.c functions and the ns16550 UART backend.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwXrPT8nc4YUdJ9@thinks.paulus.ozlabs.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/devtree.c | 59 +++++++++++++++++++++----------------
 arch/powerpc/boot/ns16550.c |  9 ++++--
 2 files changed, 41 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index a7e21a35c03a..27c84b82b588 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -17,6 +17,7 @@
 #include "string.h"
 #include "stdio.h"
 #include "ops.h"
+#include "of.h"
 
 void dt_fixup_memory(u64 start, u64 size)
 {
@@ -27,21 +28,25 @@ void dt_fixup_memory(u64 start, u64 size)
 	root = finddevice("/");
 	if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0)
 		naddr = 2;
+	else
+		naddr = be32_to_cpu(naddr);
 	if (naddr < 1 || naddr > 2)
 		fatal("Can't cope with #address-cells == %d in /\n\r", naddr);
 
 	if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0)
 		nsize = 1;
+	else
+		nsize = be32_to_cpu(nsize);
 	if (nsize < 1 || nsize > 2)
 		fatal("Can't cope with #size-cells == %d in /\n\r", nsize);
 
 	i = 0;
 	if (naddr == 2)
-		memreg[i++] = start >> 32;
-	memreg[i++] = start & 0xffffffff;
+		memreg[i++] = cpu_to_be32(start >> 32);
+	memreg[i++] = cpu_to_be32(start & 0xffffffff);
 	if (nsize == 2)
-		memreg[i++] = size >> 32;
-	memreg[i++] = size & 0xffffffff;
+		memreg[i++] = cpu_to_be32(size >> 32);
+	memreg[i++] = cpu_to_be32(size & 0xffffffff);
 
 	memory = finddevice("/memory");
 	if (! memory) {
@@ -49,9 +54,9 @@ void dt_fixup_memory(u64 start, u64 size)
 		setprop_str(memory, "device_type", "memory");
 	}
 
-	printf("Memory <- <0x%x", memreg[0]);
+	printf("Memory <- <0x%x", be32_to_cpu(memreg[0]));
 	for (i = 1; i < (naddr + nsize); i++)
-		printf(" 0x%x", memreg[i]);
+		printf(" 0x%x", be32_to_cpu(memreg[i]));
 	printf("> (%ldMB)\n\r", (unsigned long)(size >> 20));
 
 	setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32));
@@ -69,10 +74,10 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus)
 		printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus));
 
 	while ((devp = find_node_by_devtype(devp, "cpu"))) {
-		setprop_val(devp, "clock-frequency", cpu);
-		setprop_val(devp, "timebase-frequency", tb);
+		setprop_val(devp, "clock-frequency", cpu_to_be32(cpu));
+		setprop_val(devp, "timebase-frequency", cpu_to_be32(tb));
 		if (bus > 0)
-			setprop_val(devp, "bus-frequency", bus);
+			setprop_val(devp, "bus-frequency", cpu_to_be32(bus));
 	}
 
 	timebase_period_ns = 1000000000 / tb;
@@ -84,7 +89,7 @@ void dt_fixup_clock(const char *path, u32 freq)
 
 	if (devp) {
 		printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq));
-		setprop_val(devp, "clock-frequency", freq);
+		setprop_val(devp, "clock-frequency", cpu_to_be32(freq));
 	}
 }
 
@@ -137,8 +142,12 @@ void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize)
 {
 	if (getprop(node, "#address-cells", naddr, 4) != 4)
 		*naddr = 2;
+	else
+		*naddr = be32_to_cpu(*naddr);
 	if (getprop(node, "#size-cells", nsize, 4) != 4)
 		*nsize = 1;
+	else
+		*nsize = be32_to_cpu(*nsize);
 }
 
 static void copy_val(u32 *dest, u32 *src, int naddr)
@@ -167,9 +176,9 @@ static int add_reg(u32 *reg, u32 *add, int naddr)
 	int i, carry = 0;
 
 	for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) {
-		u64 tmp = (u64)reg[i] + add[i] + carry;
+		u64 tmp = (u64)be32_to_cpu(reg[i]) + be32_to_cpu(add[i]) + carry;
 		carry = tmp >> 32;
-		reg[i] = (u32)tmp;
+		reg[i] = cpu_to_be32((u32)tmp);
 	}
 
 	return !carry;
@@ -184,18 +193,18 @@ static int compare_reg(u32 *reg, u32 *range, u32 *rangesize)
 	u32 end;
 
 	for (i = 0; i < MAX_ADDR_CELLS; i++) {
-		if (reg[i] < range[i])
+		if (be32_to_cpu(reg[i]) < be32_to_cpu(range[i]))
 			return 0;
-		if (reg[i] > range[i])
+		if (be32_to_cpu(reg[i]) > be32_to_cpu(range[i]))
 			break;
 	}
 
 	for (i = 0; i < MAX_ADDR_CELLS; i++) {
-		end = range[i] + rangesize[i];
+		end = be32_to_cpu(range[i]) + be32_to_cpu(rangesize[i]);
 
-		if (reg[i] < end)
+		if (be32_to_cpu(reg[i]) < end)
 			break;
-		if (reg[i] > end)
+		if (be32_to_cpu(reg[i]) > end)
 			return 0;
 	}
 
@@ -244,7 +253,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
 		return 0;
 
 	dt_get_reg_format(parent, &naddr, &nsize);
-
 	if (nsize > 2)
 		return 0;
 
@@ -256,10 +264,10 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
 
 	copy_val(last_addr, prop_buf + offset, naddr);
 
-	ret_size = prop_buf[offset + naddr];
+	ret_size = be32_to_cpu(prop_buf[offset + naddr]);
 	if (nsize == 2) {
 		ret_size <<= 32;
-		ret_size |= prop_buf[offset + naddr + 1];
+		ret_size |= be32_to_cpu(prop_buf[offset + naddr + 1]);
 	}
 
 	for (;;) {
@@ -282,7 +290,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
 
 		offset = find_range(last_addr, prop_buf, prev_naddr,
 		                    naddr, prev_nsize, buflen / 4);
-
 		if (offset < 0)
 			return 0;
 
@@ -300,8 +307,7 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
 	if (naddr > 2)
 		return 0;
 
-	ret_addr = ((u64)last_addr[2] << 32) | last_addr[3];
-
+	ret_addr = ((u64)be32_to_cpu(last_addr[2]) << 32) | be32_to_cpu(last_addr[3]);
 	if (sizeof(void *) == 4 &&
 	    (ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL ||
 	     ret_addr + ret_size > 0x100000000ULL))
@@ -354,11 +360,14 @@ int dt_is_compatible(void *node, const char *compat)
 int dt_get_virtual_reg(void *node, void **addr, int nres)
 {
 	unsigned long xaddr;
-	int n;
+	int n, i;
 
 	n = getprop(node, "virtual-reg", addr, nres * 4);
-	if (n > 0)
+	if (n > 0) {
+		for (i = 0; i < n/4; i ++)
+			((u32 *)addr)[i] = be32_to_cpu(((u32 *)addr)[i]);
 		return n / 4;
+	}
 
 	for (n = 0; n < nres; n++) {
 		if (!dt_xlate_reg(node, n, &xaddr, NULL))
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index 8c9ead94be06..cea34a20085c 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -14,6 +14,7 @@
 #include "stdio.h"
 #include "io.h"
 #include "ops.h"
+#include "of.h"
 
 #define UART_DLL	0	/* Out: Divisor Latch Low */
 #define UART_DLM	1	/* Out: Divisor Latch High */
@@ -57,16 +58,20 @@ int ns16550_console_init(void *devp, struct serial_console_data *scdp)
 	int n;
 	u32 reg_offset;
 
-	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1) {
+		printf("virt reg parse fail...\r\n");
 		return -1;
+	}
 
 	n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
 	if (n == sizeof(reg_offset))
-		reg_base += reg_offset;
+		reg_base += be32_to_cpu(reg_offset);
 
 	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
 	if (n != sizeof(reg_shift))
 		reg_shift = 0;
+	else
+		reg_shift = be32_to_cpu(reg_shift);
 
 	scdp->open = ns16550_open;
 	scdp->putc = ns16550_putc;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 20/23] backlight: lm3630a: Fix return code of .update_status() callback
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (17 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 19/23] powerpc/boot: Fixup device-tree on little endian Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 21/23] ALSA: hda: Add IRQ check for platform_get_irq() Sasha Levin
                   ` (2 subsequent siblings)
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Uwe Kleine-König, Daniel Thompson, Lee Jones, Sasha Levin,
	dri-devel, linux-fbdev

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit b9481a667a90ec739995e85f91f3672ca44d6ffa ]

According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.

While touching that also add the error code to the failure message.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 5ef6f9d420a2..ab882c04f975 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -183,7 +183,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 	if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
 		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
 				 bl->props.max_brightness);
-		return bl->props.brightness;
+		return 0;
 	}
 
 	/* disable sleep */
@@ -203,8 +203,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 	return 0;
 
 out_i2c_err:
-	dev_err(pchip->dev, "i2c failed to access\n");
-	return bl->props.brightness;
+	dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+	return ret;
 }
 
 static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
@@ -260,7 +260,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 	if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
 		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
 				 bl->props.max_brightness);
-		return bl->props.brightness;
+		return 0;
 	}
 
 	/* disable sleep */
@@ -280,8 +280,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 	return 0;
 
 out_i2c_err:
-	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
-	return bl->props.brightness;
+	dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+	return ret;
 }
 
 static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 21/23] ALSA: hda: Add IRQ check for platform_get_irq()
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (18 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 20/23] backlight: lm3630a: Fix return code of .update_status() callback Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 22/23] jfs: fix GPF in diFree Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 23/23] lib/decompress_unlz4.c: correctly handle zero-padding around initrds Sasha Levin
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jiajun Cao, Xin Tan, Thierry Reding, Takashi Iwai, Sasha Levin,
	alsa-devel, linux-tegra

From: Jiajun Cao <jjcao20@fudan.edu.cn>

[ Upstream commit 8c13212443230d03ff25014514ec0d53498c0912 ]

The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().

hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().

Fix it by adding a check for the return value irq_id.

Signed-off-by: Jiajun Cao <jjcao20@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_tegra.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index 039fbbb1e53c..89359a962e47 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -363,6 +363,9 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)
 	unsigned short gcap;
 	int irq_id = platform_get_irq(pdev, 0);
 
+	if (irq_id < 0)
+		return irq_id;
+
 	err = hda_tegra_init_chip(chip, pdev);
 	if (err)
 		return err;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 22/23] jfs: fix GPF in diFree
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (19 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 21/23] ALSA: hda: Add IRQ check for platform_get_irq() Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 23/23] lib/decompress_unlz4.c: correctly handle zero-padding around initrds Sasha Levin
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pavel Skripkin, syzbot+0a89a7b56db04c21a656, Dave Kleikamp,
	Sasha Levin, jfs-discussion

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 9d574f985fe33efd6911f4d752de6f485a1ea732 ]

Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:

	struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
	struct inomap *imap = JFS_IP(ipimap)->i_imap;

JFS_IP() will return invalid pointer when ipimap == NULL

Call Trace:
 diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
 jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
 evict+0x2ed/0x750 fs/inode.c:578
 iput_final fs/inode.c:1654 [inline]
 iput.part.0+0x3fe/0x820 fs/inode.c:1680
 iput+0x58/0x70 fs/inode.c:1670

Reported-and-tested-by: syzbot+0a89a7b56db04c21a656@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 41aa3ca6a6a4..b318732a8562 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -160,7 +160,8 @@ void jfs_evict_inode(struct inode *inode)
 			if (test_cflag(COMMIT_Freewmap, inode))
 				jfs_free_zero_link(inode);
 
-			diFree(inode);
+			if (JFS_SBI(inode->i_sb)->ipimap)
+				diFree(inode);
 
 			/*
 			 * Free the inode from the quota allocation.
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

* [PATCH AUTOSEL 4.4 23/23] lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
  2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
                   ` (20 preceding siblings ...)
  2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 22/23] jfs: fix GPF in diFree Sasha Levin
@ 2021-07-10  2:39 ` Sasha Levin
  21 siblings, 0 replies; 23+ messages in thread
From: Sasha Levin @ 2021-07-10  2:39 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Dimitri John Ledkov, Kyungsik Lee, Yinghai Lu, Bongkyu Kim,
	Kees Cook, Sven Schmidt, Rajat Asthana, Nick Terrell, Gao Xiang,
	Andrew Morton, Linus Torvalds, Sasha Levin

From: Dimitri John Ledkov <dimitri.ledkov@canonical.com>

[ Upstream commit 2c484419efc09e7234c667aa72698cb79ba8d8ed ]

lz4 compatible decompressor is simple.  The format is underspecified and
relies on EOF notification to determine when to stop.  Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding.  Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.

To test this I have created two cpio initrds, first a normal one,
main.cpio.  And second one with just a single /test-file with content
"second" second.cpio.  Then i compressed both of them with gzip, and with
lz4 -l.  Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4).  To create four testcase initrds:

 1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
 2) main.cpio.lz4  + extra.cpio.lz4 = pad0.lz4
 3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
 4) main.cpio.lz4  + pad4 + extra.cpio.lz4 = pad4.lz4

The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.

All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed.  Also an
error message printed which usually is harmless.

Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.

This fixes lz4 initrd decompress warning on every boot with grub.  And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub.  This patch has been shipping in Ubuntu kernels since
January 2021.

[1] ./Documentation/driver-api/early-userspace/buffer-format.rst

BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/20210114200256.196589-1-xnox@ubuntu.com/ # v0
Link: https://lkml.kernel.org/r/20210513104831.432975-1-dimitri.ledkov@canonical.com
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Rajat Asthana <thisisrast7@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/decompress_unlz4.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/lib/decompress_unlz4.c b/lib/decompress_unlz4.c
index 036fc882cd72..f1449244fdd4 100644
--- a/lib/decompress_unlz4.c
+++ b/lib/decompress_unlz4.c
@@ -115,6 +115,9 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
 				error("data corrupted");
 				goto exit_2;
 			}
+		} else if (size < 4) {
+			/* empty or end-of-file */
+			goto exit_3;
 		}
 
 		chunksize = get_unaligned_le32(inp);
@@ -128,6 +131,10 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
 			continue;
 		}
 
+		if (!fill && chunksize == 0) {
+			/* empty or end-of-file */
+			goto exit_3;
+		}
 
 		if (posp)
 			*posp += 4;
@@ -184,6 +191,7 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
 		}
 	}
 
+exit_3:
 	ret = 0;
 exit_2:
 	if (!input)
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 23+ messages in thread

end of thread, other threads:[~2021-07-10  2:43 UTC | newest]

Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-10  2:38 [PATCH AUTOSEL 4.4 01/23] tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 02/23] misc/libmasm/module: Fix two use after free in ibmasm_init_one Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 03/23] Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro" Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 04/23] scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 05/23] tty: serial: 8250: serial_cs: Fix a memory leak in error handling path Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 06/23] fs/jfs: Fix missing error code in lmLogInit() Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 07/23] scsi: iscsi: Add iscsi_cls_conn refcount helpers Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 08/23] mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 09/23] USB: core: Avoid WARNings for 0-length descriptor requests Sasha Levin
2021-07-10  2:38 ` [PATCH AUTOSEL 4.4 10/23] ALSA: sb: Fix potential double-free of CSP mixer elements Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 11/23] powerpc/ps3: Add dma_mask to ps3_dma_region Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 12/23] gpio: zynq: Check return value of pm_runtime_get_sync Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 13/23] ALSA: ppc: fix error return code in snd_pmac_probe() Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 14/23] selftests/powerpc: Fix "no_handler" EBB selftest Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 15/23] ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing() Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 16/23] ALSA: bebob: add support for ToneWeal FW66 Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 17/23] usb: gadget: f_hid: fix endianness issue with descriptors Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 18/23] usb: gadget: hid: fix error return code in hid_bind() Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 19/23] powerpc/boot: Fixup device-tree on little endian Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 20/23] backlight: lm3630a: Fix return code of .update_status() callback Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 21/23] ALSA: hda: Add IRQ check for platform_get_irq() Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 22/23] jfs: fix GPF in diFree Sasha Levin
2021-07-10  2:39 ` [PATCH AUTOSEL 4.4 23/23] lib/decompress_unlz4.c: correctly handle zero-padding around initrds Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).