[PATCH AUTOSEL 5.12 001/102] ARM: dts: gemini: rename mdio to the right name

[PATCH AUTOSEL 5.12 001/102] ARM: dts: gemini: rename mdio to the right name

[Sasha Levin]

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit fc5b59b945b546e27977e99a5ca6fe61179ff0d2 ]

ethernet-phy is not the right name for mdio, fix it.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
 arch/arm/boot/dts/gemini-nas4220b.dts      | 2 +-
 arch/arm/boot/dts/gemini-rut1xx.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd111.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd222.dts        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..b8acc6eaaa6d 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@ map1 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..13112a8a5dd8 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@ led-green-os {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..79f17988884f 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@ led-power {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@ led-greeb-l3 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@ led-green-l3 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-- 
2.30.2

[PATCH AUTOSEL 5.12 002/102] ARM: dts: gemini: add device_type on pci

[Sasha Levin]

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit 483f3645b3f7acfd1c78a19d51b80c0656161974 ]

Fixes DT warning on pci node by adding the missing device_type.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..07448c03dac9 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@ pci@50000000 {
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 003/102] ARM: dts: rockchip: Fix thermal sensor cells o rk322x

[Sasha Levin]

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit d5c24e20daf09587cbc221d40be1ba92673e8d94 ]

The number of cells to be used with a thermal sensor specifier
must be "1". Fix this.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210506175514.168365-2-ezequiel@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk322x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index a4dd50aaf3fc..799c9bfde4c9 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -520,7 +520,7 @@ tsadc: tsadc@11150000 {
 		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
 		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.12 004/102] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
 arch/arm/boot/dts/rk3288.dtsi      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b827ea2f..e817eba8c622 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@ sdmmc_pwr: sdmmc-pwr {
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index ea7416c31f9b..6f251468fe34 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1586,7 +1586,7 @@ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 5.12 005/102] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 954d5986afa50c178ea7554e6abdd611d08f5ade ]

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210413141709.845592-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 48ed4aaa37f3..476787027e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index fb7599f07af4..17ba7c3d9a9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -469,7 +469,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 7257494d2831..bc385ad45a13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -324,7 +324,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.30.2

[PATCH AUTOSEL 5.12 006/102] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit a7ecfad495f8af63a5cb332c91f60ab2018897f5 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index edbbf35fe19e..02e8d9b5174d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2361,7 +2361,7 @@ sdmmc_wp: sdmmc-wp {
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 5.12 007/102] ARM: dts: rockchip: Fix the timer clocks order

[Sasha Levin]

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 7b46d674ac000b101fdad92cf16cc11d90b72f86 ]

Fixed order is the device-tree convention.
The timer driver currently gets clocks by name,
so no changes are needed there.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 8 ++++----
 arch/arm/boot/dts/rk3288.dtsi | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d840ba..2c08ae60e4a1 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@ timer3: timer@2000e000 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6f251468fe34..f9ee26e3ca55 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -196,8 +196,8 @@ timer: timer@ff810000 {
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
-- 
2.30.2

[PATCH AUTOSEL 5.12 008/102] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x

[Sasha Levin]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

[ Upstream commit 6b023929666f0be5df75f5e0278d1b70effadf42 ]

Add '#" to iommu-cells properties.
Remove useless interrupt-names properties

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk322x.dtsi | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 799c9bfde4c9..c953ab0e20ed 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -561,10 +561,9 @@ vpu_mmu: iommu@20020800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -572,10 +571,9 @@ vdec_mmu: iommu@20030480 {
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -605,7 +603,6 @@ vop_mmu: iommu@20053f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -626,10 +623,9 @@ iep_mmu: iommu@20070800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 009/102] ARM: dts: rockchip: Fix power-controller node names for rk3066a

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit f2948781a72f0d8cf2adf31758c357f2f35e6c79 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 252750c97f97..bbc3bff50856 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -755,7 +755,7 @@ power: power-controller {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -782,7 +782,7 @@ pd_vio@RK3066_PD_VIO {
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -791,7 +791,7 @@ pd_video@RK3066_PD_VIDEO {
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 010/102] ARM: dts: rockchip: Fix power-controller node names for rk3188

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2c08ae60e4a1..b6bde9d12c2b 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -699,7 +699,7 @@ power: power-controller {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -721,7 +721,7 @@ pd_vio@RK3188_PD_VIO {
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -730,7 +730,7 @@ pd_video@RK3188_PD_VIDEO {
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 011/102] ARM: dts: rockchip: Fix power-controller node names for rk3288

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index f9ee26e3ca55..75613ae2d643 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -769,7 +769,7 @@ power: power-controller {
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -811,7 +811,7 @@ pd_vio@RK3288_PD_VIO {
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -825,7 +825,7 @@ pd_hevc@RK3288_PD_HEVC {
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -836,7 +836,7 @@ pd_video@RK3288_PD_VIDEO {
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 012/102] arm64: dts: rockchip: Fix power-controller node names for px30

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d5de0d688ac6e0202674577b05d0726b8a6af401 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index c45b0cfcae09..fb3a863e0caf 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -247,20 +247,20 @@ power: power-controller {
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -268,7 +268,7 @@ pd_gmac@PX30_PD_GMAC {
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -281,14 +281,14 @@ pd_mmc_nand@PX30_PD_MMC_NAND {
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -304,7 +304,7 @@ pd_vo@PX30_PD_VO {
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -315,7 +315,7 @@ pd_vi@PX30_PD_VI {
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 013/102] arm64: dts: rockchip: Fix power-controller node names for rk3328

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 6e6a282b49c6db408d27231e3c709fbdf25e3c1b ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 063ed0adbec4..084acfd597af 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -303,13 +303,13 @@ power: power-controller {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pd_hevc@RK3328_PD_HEVC {
+			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 			};
-			pd_video@RK3328_PD_VIDEO {
+			power-domain@RK3328_PD_VIDEO {
 				reg = <RK3328_PD_VIDEO>;
 			};
-			pd_vpu@RK3328_PD_VPU {
+			power-domain@RK3328_PD_VPU {
 				reg = <RK3328_PD_VPU>;
 				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 5.12 014/102] arm64: dts: rockchip: Fix power-controller node names for rk3399

[Sasha Levin]

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 148bbe29f9108812c6fedd8a228f9e1ed6b422f7 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-8-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 40 ++++++++++++------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 02e8d9b5174d..b265cc1b558d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -971,26 +971,26 @@ power: power-controller {
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_CENTER */
-			pd_iep@RK3399_PD_IEP {
+			power-domain@RK3399_PD_IEP {
 				reg = <RK3399_PD_IEP>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru HCLK_IEP>;
 				pm_qos = <&qos_iep>;
 			};
-			pd_rga@RK3399_PD_RGA {
+			power-domain@RK3399_PD_RGA {
 				reg = <RK3399_PD_RGA>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru HCLK_RGA>;
 				pm_qos = <&qos_rga_r>,
 					 <&qos_rga_w>;
 			};
-			pd_vcodec@RK3399_PD_VCODEC {
+			power-domain@RK3399_PD_VCODEC {
 				reg = <RK3399_PD_VCODEC>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
 				pm_qos = <&qos_video_m0>;
 			};
-			pd_vdu@RK3399_PD_VDU {
+			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
 					 <&cru HCLK_VDU>;
@@ -999,94 +999,94 @@ pd_vdu@RK3399_PD_VDU {
 			};
 
 			/* These power domains are grouped by VD_GPU */
-			pd_gpu@RK3399_PD_GPU {
+			power-domain@RK3399_PD_GPU {
 				reg = <RK3399_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu>;
 			};
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_edp@RK3399_PD_EDP {
+			power-domain@RK3399_PD_EDP {
 				reg = <RK3399_PD_EDP>;
 				clocks = <&cru PCLK_EDP_CTRL>;
 			};
-			pd_emmc@RK3399_PD_EMMC {
+			power-domain@RK3399_PD_EMMC {
 				reg = <RK3399_PD_EMMC>;
 				clocks = <&cru ACLK_EMMC>;
 				pm_qos = <&qos_emmc>;
 			};
-			pd_gmac@RK3399_PD_GMAC {
+			power-domain@RK3399_PD_GMAC {
 				reg = <RK3399_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_sd@RK3399_PD_SD {
+			power-domain@RK3399_PD_SD {
 				reg = <RK3399_PD_SD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sd>;
 			};
-			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+			power-domain@RK3399_PD_SDIOAUDIO {
 				reg = <RK3399_PD_SDIOAUDIO>;
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
 			};
-			pd_tcpc0@RK3399_PD_TCPD0 {
+			power-domain@RK3399_PD_TCPD0 {
 				reg = <RK3399_PD_TCPD0>;
 				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
 					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
 			};
-			pd_tcpc1@RK3399_PD_TCPD1 {
+			power-domain@RK3399_PD_TCPD1 {
 				reg = <RK3399_PD_TCPD1>;
 				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
 					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
 			};
-			pd_usb3@RK3399_PD_USB3 {
+			power-domain@RK3399_PD_USB3 {
 				reg = <RK3399_PD_USB3>;
 				clocks = <&cru ACLK_USB3>;
 				pm_qos = <&qos_usb_otg0>,
 					 <&qos_usb_otg1>;
 			};
-			pd_vio@RK3399_PD_VIO {
+			power-domain@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				pd_hdcp@RK3399_PD_HDCP {
+				power-domain@RK3399_PD_HDCP {
 					reg = <RK3399_PD_HDCP>;
 					clocks = <&cru ACLK_HDCP>,
 						 <&cru HCLK_HDCP>,
 						 <&cru PCLK_HDCP>;
 					pm_qos = <&qos_hdcp>;
 				};
-				pd_isp0@RK3399_PD_ISP0 {
+				power-domain@RK3399_PD_ISP0 {
 					reg = <RK3399_PD_ISP0>;
 					clocks = <&cru ACLK_ISP0>,
 						 <&cru HCLK_ISP0>;
 					pm_qos = <&qos_isp0_m0>,
 						 <&qos_isp0_m1>;
 				};
-				pd_isp1@RK3399_PD_ISP1 {
+				power-domain@RK3399_PD_ISP1 {
 					reg = <RK3399_PD_ISP1>;
 					clocks = <&cru ACLK_ISP1>,
 						 <&cru HCLK_ISP1>;
 					pm_qos = <&qos_isp1_m0>,
 						 <&qos_isp1_m1>;
 				};
-				pd_vo@RK3399_PD_VO {
+				power-domain@RK3399_PD_VO {
 					reg = <RK3399_PD_VO>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					pd_vopb@RK3399_PD_VOPB {
+					power-domain@RK3399_PD_VOPB {
 						reg = <RK3399_PD_VOPB>;
 						clocks = <&cru ACLK_VOP0>,
 							 <&cru HCLK_VOP0>;
 						pm_qos = <&qos_vop_big_r>,
 							 <&qos_vop_big_w>;
 					};
-					pd_vopl@RK3399_PD_VOPL {
+					power-domain@RK3399_PD_VOPL {
 						reg = <RK3399_PD_VOPL>;
 						clocks = <&cru ACLK_VOP1>,
 							 <&cru HCLK_VOP1>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 015/102] reset: ti-syscon: fix to_ti_syscon_reset_data macro

[Sasha Levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ]

The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.

Fixes a checkpatch --strict issue:

  CHECK: Macro argument reuse 'rcdev' - possible side-effects?
  #53: FILE: drivers/reset/reset-ti-syscon.c:53:
  +#define to_ti_syscon_reset_data(rcdev)	\
  +	container_of(rcdev, struct ti_syscon_reset_data, rcdev)

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-ti-syscon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
index 218370faf37b..2b92775d58f0 100644
--- a/drivers/reset/reset-ti-syscon.c
+++ b/drivers/reset/reset-ti-syscon.c
@@ -58,8 +58,8 @@ struct ti_syscon_reset_data {
 	unsigned int nr_controls;
 };
 
-#define to_ti_syscon_reset_data(rcdev)	\
-	container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+#define to_ti_syscon_reset_data(_rcdev)	\
+	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
 
 /**
  * ti_syscon_reset_assert() - assert device reset
-- 
2.30.2

[PATCH AUTOSEL 5.12 016/102] ARM: dts: BCM5301X: Fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit b660269cba748dfd07eb5551a88ff34d5ea0b86e ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts      | 4 ++--
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts     | 4 ++--
 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi          | 4 ++--
 arch/arm/boot/dts/bcm5301x.dtsi                   | 2 +-
 arch/arm/boot/dts/bcm953012k.dts                  | 4 ++--
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
 6 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 8636600385fd..c81944cd6d0b 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -24,8 +24,8 @@ memory@0 {
 		reg = <0x00000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index e635a15041dd..a6e2aeb28675 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -25,8 +25,8 @@ memory@0 {
 		      <0x88000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index 925a7c9ce5b7..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -6,8 +6,8 @@
  */
 
 / {
-	nand@18028000 {
-		nandcs: nandcs@0 {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
 			compatible = "brcm,nandcs";
 			reg = <0>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 7db72a2f1020..092ec525c01c 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -501,7 +501,7 @@ rng: rng@18004000 {
 		reg = <0x18004000 0x14>;
 	};
 
-	nand: nand@18028000 {
+	nand_controller: nand-controller@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
 		reg-names = "nand", "iproc-idm", "iproc-ext";
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 046c59fb4846..de40bd59a5fa 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -49,8 +49,8 @@ memory@80000000 {
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9e799328c6db..037fdd07d43b 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -269,7 +269,7 @@ nand@1800 {
 			interrupt-names = "nand";
 			status = "okay";
 
-			nandcs: nandcs@0 {
+			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
 				reg = <0>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 5.12 017/102] ARM: brcmstb: dts: fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 4 ++--
 arch/arm/boot/dts/bcm7445.dtsi             | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@ memory@0 {
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@ aon-ctrl@410000 {
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 018/102] ARM: Cygnus: dts: fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi      | 2 +-
 arch/arm/boot/dts/bcm911360_entphn.dts | 4 ++--
 arch/arm/boot/dts/bcm958300k.dts       | 4 ++--
 arch/arm/boot/dts/bcm958305k.dts       | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 0025c88f660c..8ecb7861ce10 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@ sdhci1: sdhci@18043000 {
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2

[PATCH AUTOSEL 5.12 019/102] ARM: NSP: dts: fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi     | 2 +-
 arch/arm/boot/dts/bcm958522er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525xmc.dts | 4 ++--
 arch/arm/boot/dts/bcm958622hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958623hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625k.dts   | 4 ++--
 arch/arm/boot/dts/bcm988312hr.dts  | 4 ++--
 9 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b4d2cc70afb1..748df7955ae6 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -269,7 +269,7 @@ mailbox: mailbox@25c00 {
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 5443fc079e6e..1f73885ec274 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e1e3c26cef19..b6b9ca8b0972 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index f161ba2e7e5e..ecf426f6ad5d 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@ rtc@68 {
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 83cb877d63db..8ca18da981ad 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 4e106ce1384a..9747378db531 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cda6cc281e18..0f92b773afb8 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index ffbff0014c65..9e984ca0e6df 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 3fd39c479a3c..5475dab8181d 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2

[PATCH AUTOSEL 5.12 020/102] ARM: dts: BCM63xx: Fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm63138.dtsi    | 2 +-
 arch/arm/boot/dts/bcm963138dvt.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@ serial1: serial@620 {
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@ &serial1 {
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 021/102] ARM: dts: Hurricane 2: Fix NAND nodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..84cda16f68a2 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@ amac0: ethernet@22000 {
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 022/102] ARM: dts: BCM5301X: Fix pinmux subnodes names

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit bb95d7d440fefd104c593d9cb20da6d34a474e97 ]

This matches pinmux-node.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm47094.dtsi | 2 +-
 arch/arm/boot/dts/bcm5301x.dtsi | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 2a8f7312d1be..6282363313e1 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -11,7 +11,7 @@ / {
 &pinctrl {
 	compatible = "brcm,bcm4709-pinmux";
 
-	pinmux_mdio: mdio {
+	pinmux_mdio: mdio-pins {
 		groups = "mdio_grp";
 		function = "mdio";
 	};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 092ec525c01c..5b9723a10bd6 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -458,18 +458,18 @@ spi-pins {
 					function = "spi";
 				};
 
-				pinmux_i2c: i2c {
+				pinmux_i2c: i2c-pins {
 					groups = "i2c_grp";
 					function = "i2c";
 				};
 
-				pinmux_pwm: pwm {
+				pinmux_pwm: pwm-pins {
 					groups = "pwm0_grp", "pwm1_grp",
 						 "pwm2_grp", "pwm3_grp";
 					function = "pwm";
 				};
 
-				pinmux_uart1: uart1 {
+				pinmux_uart1: uart1-pins {
 					groups = "uart1_grp";
 					function = "uart1";
 				};
-- 
2.30.2

[PATCH AUTOSEL 5.12 023/102] soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'

[Sasha Levin]

From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>

[ Upstream commit c1f512182c54dc87efd2f7ac19f16a49ff8bb19e ]

Fix the following clang warning:

drivers/soc/bcm/brcmstb/common.c:17:34: warning: unused variable
'brcmstb_machine_match' [-Wunused-const-variable].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/bcm/brcmstb/common.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index e87dfc6660f3..2a010881f4b6 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -14,11 +14,6 @@
 static u32 family_id;
 static u32 product_id;
 
-static const struct of_device_id brcmstb_machine_match[] = {
-	{ .compatible = "brcm,brcmstb", },
-	{ }
-};
-
 u32 brcmstb_get_family_id(void)
 {
 	return family_id;
-- 
2.30.2

[PATCH AUTOSEL 5.12 024/102] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit e0cdd26af8eb9001689a4cde4f72c61c1c4b06be ]

The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as
done for all the other pins with GPIO functionality. Fix for consistency.

There are no mainline users that needs adaption.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f984b702efc5..908caf810351 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -563,15 +563,15 @@
 #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
 #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
 #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
 #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
 #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
 #define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
 
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
 #define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
 #define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
 #define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
@@ -580,18 +580,18 @@
 #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
 #define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
 
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
 #define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
 #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
 #define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
 
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
 #define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
 #define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
 #define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
 #define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
 
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
 #define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
 #define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
 #define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
-- 
2.30.2

[PATCH AUTOSEL 5.12 025/102] ARM: dts: exynos: align Broadcom WiFi with dtschema

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit cc29e39412b9a78b43f7dfa09d739f8ba9fa7984 ]

The Broadcom BCM4329 family dtschema expects devices to be compatible
also with brcm,bcm4329-fmac:

  arch/arm/boot/dts/exynos3250-rinato.dt.yaml: wifi@1: compatible: 'oneOf' conditional failed, one must be fixed:
    ['brcm,bcm4334-fmac'] is too short
    'brcm,bcm4329-fmac' was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210505135941.59898-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos3250-rinato.dts         | 2 +-
 arch/arm/boot/dts/exynos4210-i9100.dts          | 2 +-
 arch/arm/boot/dts/exynos4210-trats.dts          | 2 +-
 arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index d64ccf4b7d32..2a93f71abf9a 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -653,7 +653,7 @@ &mshc_1 {
 	mmc-pwrseq = <&wlan_pwrseq>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4334-fmac";
+		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx1>;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index d98c78207aaf..26820b46cc76 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -752,7 +752,7 @@ &sdhci_3 {
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx2>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index d2406c9146b8..3eb8df319246 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -521,7 +521,7 @@ &sdhci_3 {
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx2>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index dd44ad2c6ad6..f052853244a4 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -614,7 +614,7 @@ &sdhci_3 {
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 		interrupt-parent = <&gpx2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 026/102] soc: mediatek: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit ba96de3ae5a7e2121cac80053b277eb2ab51a0ae ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705350-104687-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/mediatek/mtk-devapc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/mediatek/mtk-devapc.c b/drivers/soc/mediatek/mtk-devapc.c
index f1cea041dc5a..7c65ad3d1f8a 100644
--- a/drivers/soc/mediatek/mtk-devapc.c
+++ b/drivers/soc/mediatek/mtk-devapc.c
@@ -234,6 +234,7 @@ static const struct of_device_id mtk_devapc_dt_match[] = {
 	}, {
 	},
 };
+MODULE_DEVICE_TABLE(of, mtk_devapc_dt_match);
 
 static int mtk_devapc_probe(struct platform_device *pdev)
 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 027/102] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control

[Sasha Levin]

From: Primoz Fiser <primoz.fiser@norik.com>

[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ]

Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.

Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f28a96fcf23e..3f262e8ebf7f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -316,8 +316,8 @@ pinctrl_uart3: uart3grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -404,6 +404,7 @@ &reg_soc {
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 028/102] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info

[Sasha Levin]

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ]

The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c,
is imx5_cpu_suspend_info.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/suspend-imx53.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
-- 
2.30.2

[PATCH AUTOSEL 5.12 029/102] arm64: dts: rockchip: fix regulator-gpio states array

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit b82f8e2992534aab0fa762a37376be30df263701 ]

A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long

dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi         | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 7a96be10eaf0..bce6f8b7db43 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -78,8 +78,8 @@ vcc_sdmmc: vcc-sdmmc {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index faf496d789cf..95c2dd4bbe84 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -72,8 +72,8 @@ vcc_io_sdio: sdmmcio-regulator {
 		regulator-settling-time-us = <5000>;
 		regulator-type = "voltage";
 		startup-delay-us = <2000>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		vin-supply = <&vcc_io_33>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 19959bfba451..7d9481962f51 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -45,8 +45,8 @@ vcc_sd: sdmmc-regulator {
 	vcc_sdio: sdmmcio-regulator {
 		compatible = "regulator-gpio";
 		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		regulator-name = "vcc_sdio";
 		regulator-type = "voltage";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index beee5fbb3443..5d7a9d96d163 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@ &ppvar_gpu_pwm {
 };
 
 &ppvar_sd_card_io {
-	states = <1800000 0x0 3300000 0x1>;
+	states = <1800000 0x0>, <3300000 0x1>;
 	regulator-max-microvolt = <3300000>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 32dcaf210085..765b24a2bcbf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -247,8 +247,8 @@ ppvar_sd_card_io: ppvar-sd-card-io {
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 030/102] ARM: dts: ux500: Fix interrupt cells

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ]

Fix interrupt cells in DT AB8500/AB8505 source files. The
compiled DTB files will stay the same.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ab8500.dtsi | 26 +++++++++++++-------------
 arch/arm/boot/dts/ste-ab8505.dtsi | 22 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 4fd09997a2b9..5c5a5a2dadfc 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -42,15 +42,15 @@ ab8500_gpio: ab8500-gpio {
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -219,13 +219,13 @@ ab8500_chargalg {
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -242,8 +242,8 @@ ab8500_usb {
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index cc045b2fc217..3380afa74c14 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -39,8 +39,8 @@ ab8505_gpio: ab8505-gpio {
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
@@ -182,13 +182,13 @@ ab8500_chargalg {
 
 				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -205,8 +205,8 @@ ab8500_usb: ab8500_usb {
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 031/102] ARM: dts: ux500: Rename gpio-controller node

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit 4917b702818872fdf2a9973705af3aa7d3d1f19e ]

Rename the AB8500 gpio controller node from ab8500-gpio to
ab8500-gpiocontroller, since -gpio is a common suffix for
gpio consumers.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ab8500.dtsi      | 2 +-
 arch/arm/boot/dts/ste-ab8505.dtsi      | 2 +-
 arch/arm/boot/dts/ste-href-ab8500.dtsi | 2 +-
 arch/arm/boot/dts/ste-href.dtsi        | 2 +-
 arch/arm/boot/dts/ste-snowball.dts     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 5c5a5a2dadfc..00765c1c111d 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -34,7 +34,7 @@ ab8500_clock: clock-controller {
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpio {
+				ab8500_gpio: ab8500-gpiocontroller {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index 3380afa74c14..0defc15b9bbc 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -31,7 +31,7 @@ ab8500_clock: clock-controller {
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpio {
+				ab8505_gpio: ab8505-gpiocontroller {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743de7b9..3ccb7b5c7162 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@ / {
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 83b179692dff..7566b4963ef6 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -202,7 +202,7 @@ msp3: msp@80125000 {
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 				};
 
 				ab8500_usb {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b344b3748143..40f1d7c9c1d4 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@ spi@80002000 {
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
-- 
2.30.2

[PATCH AUTOSEL 5.12 032/102] ARM: dts: ux500: Fix orientation of accelerometer

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 4beba4011995a2c44ee27e1d358dc32e6b9211b3 ]

This adds a mounting matrix to the accelerometer
on the TVK1281618 R3.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index b580397ede83..a143198ef9c0 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -19,6 +19,9 @@ accelerometer@19 {
 					     <19 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
 			};
 			magnetometer@1e {
 				compatible = "st,lsm303dlm-magn";
-- 
2.30.2

[PATCH AUTOSEL 5.12 033/102] ARM: dts: ux500: Fix some compatible strings

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 59ba546d1662c4beb738725965041f350afe24b4 ]

The Golden and Skomer phones have BCM4334 WLAN+BT chips,
so make the compatible strings reflect the new available
bindings for these.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 3 ++-
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 4 ++--
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 0d43ee6583cf..40df7c61bf69 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -121,7 +121,7 @@ mmc@80118000 {
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 
 				/* GPIO216 (WLAN_HOST_WAKE) */
@@ -162,6 +162,7 @@ uart@80120000 {
 			pinctrl-1 = <&u0_a_1_sleep>;
 
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				/* GPIO222 (BT_VREG_ON) */
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 7411bfeda285..382f4af08a68 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -401,8 +401,7 @@ mmc@80118000 {
 			status = "okay";
 
 			wifi@1 {
-				/* Actually BRCM4330 */
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
@@ -439,6 +438,7 @@ uart@80120000 {
 			status = "okay";
 
 			bluetooth {
+				/* BCM4330B1 actually */
 				compatible = "brcm,bcm4330-bt";
 				/*
 				 * We actually have shutdown-gpios, BT_VREG_EN on GPIO222,
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index d28a00757d0b..94afd7a0fe1f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -211,7 +211,7 @@ mmc@80118000 {
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
@@ -247,6 +247,7 @@ uart@80120000 {
 
 			/* FIXME: not quite working yet, probably needs regulators */
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 034/102] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 723de6a4126b2474a8106e943749e1554012dad6 ]

Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 {
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
-- 
2.30.2

[PATCH AUTOSEL 5.12 035/102] ARM: dts: ux500: Fix orientation of Janice accelerometer

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e409c1e1d5cb164361229e3a3f084e4a32544fb6 ]

This fixes up the axis on the Janice accelerometer to give
the right orientation according to tests.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 382f4af08a68..95db996bd207 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -593,10 +593,9 @@ i2c-gate {
 					accelerometer@08 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
-						/* FIXME: no idea about this */
-						mount-matrix = "1", "0", "0",
-							       "0", "1", "0",
-							       "0", "0", "1";
+						mount-matrix = "0", "1", "0",
+							       "-1", "0", "0",
+							       "0", "0", "-1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 					};
-- 
2.30.2

[PATCH AUTOSEL 5.12 036/102] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 206e04ec7539e7bfdde9aa79a7cde656c9eb308e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mxc_v2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
index a577a74aaf75..5e0383401629 100644
--- a/drivers/rtc/rtc-mxc_v2.c
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -372,6 +372,7 @@ static const struct of_device_id mxc_ids[] = {
 	{ .compatible = "fsl,imx53-rtc", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mxc_ids);
 
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
-- 
2.30.2

[PATCH AUTOSEL 5.12 037/102] arm64: dts: renesas: beacon: Fix USB extal reference

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 56bc54496f5d6bc638127bfc9df3742cbf0039e7 ]

The USB extal clock reference isn't associated to a crystal, it's
associated to a programmable clock, so remove the extal reference,
add the usb2_clksel.  Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 8d3a4d6ee885..bd3d26b2a2bb 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -319,8 +319,10 @@ &sdhi3 {
 	status = "okay";
 };
 
-&usb_extal_clk {
-	clock-frequency = <50000000>;
+&usb2_clksel {
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		  <&versaclock5 3>, <&usb3s0_clk>;
+	status = "okay";
 };
 
 &usb3s0_clk {
-- 
2.30.2

[PATCH AUTOSEL 5.12 038/102] arm64: dts: renesas: beacon: Fix USB ref clock references

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit ebc666f39ff67a01e748c34d670ddf05a9e45220 ]

The RZ/G2 boards expect there to be an external clock reference for
USB2 EHCI controllers.  For the Beacon boards, this reference clock
is controlled by a programmable versaclock.  Because the RZ/G2
family has a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.

Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 30c169b08536..ba4b45592eee 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@ &du_out_rgb {
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
-	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 };
 
 &ehci1 {
 	status = "okay";
-	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
 };
 
 &hdmi0 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 039/102] kbuild: sink stdout from cmd for silent build

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 174a1dcc96429efce4ef7eb2f5c4506480da2182 ]

When building with 'make -s', no output to stdout should be printed.

As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.

I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.

Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.

[Note about this implementation]

'exec >/dev/null;' may look somewhat tricky, but this has a reason.

Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:

  cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null

... but it would not work if $(cmd_$(1)) itself contains a redirection.

For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.

It would be expanded into:

  echo "#include <asm-generic/$*.h>" > $@ >/dev/null

Then, the target file gets empty because the string will go to /dev/null
instead of $@.

Next, I tried this:

  cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null

The form above would be expanded into:

  { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null

This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.

When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:

  set -e;  { ; } >/dev/null

..., which causes an syntax error.

I also tried this:

  cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null

... but this causes a syntax error for the same reason.

So, finally I adopted:

  cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))

[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Kbuild.include | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 509e0856d653..f0b6dbd3c7fe 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -170,8 +170,13 @@ clean := -f $(srctree)/scripts/Makefile.clean obj
 echo-cmd = $(if $($(quiet)cmd_$(1)),\
 	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
 
+# sink stdout for 'make -s'
+       redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
 # printing commands
-cmd = @set -e; $(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
 
 ###
 # if_changed      - execute command if any prerequisite is newer than
-- 
2.30.2

[PATCH AUTOSEL 5.12 040/102] ARM: dts: am335x: align GPIO hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit fb97f63106f3174992a22fe5e42dda96a0810750 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +-
 arch/arm/boot/dts/am335x-boneblue.dts           | 2 +-
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 4 ++--
 arch/arm/boot/dts/am335x-icev2.dts              | 4 ++--
 arch/arm/boot/dts/am335x-shc.dts                | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad9912906..80116646a3fe 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -101,7 +101,7 @@ bluetooth {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4ea0f3..0afcc2ee0b63 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -436,7 +436,7 @@ &dcan1 {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327d906a..74db0fc39397 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -101,7 +101,7 @@ bluetooth {
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -118,7 +118,7 @@ ls_buf_en {
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d065304d..5e598ac96dcc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@ &uart3 {
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa26533466..2bfe60d32783 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -140,14 +140,14 @@ ehrpwm1: pwm@200 {
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -156,14 +156,14 @@ hmtc_prog {
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2

[PATCH AUTOSEL 5.12 041/102] ARM: dts: am437x: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 4 ++--
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..45cbc7fb557a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -786,7 +786,7 @@ &gpio0 {
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -819,7 +819,7 @@ &gpio5 {
 	status = "okay";
 	ti,no-reset-on-init;
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..d717d5ada812 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -725,7 +725,7 @@ &gpio2 {
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
-- 
2.30.2

[PATCH AUTOSEL 5.12 042/102] ARM: dts: omap3: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit cfb4ab3b5df86c6001127346d8331f5e87012f91 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@ &uart3 {
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@ pps {
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
-- 
2.30.2

[PATCH AUTOSEL 5.12 043/102] ARM: dts: omap5-board-common: align gpio hog names with dt-schema

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4823117cb80eedf31ddbc126b9bd92e707bd9a26 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..45435bb88c89 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@ sound: sound {
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2

[PATCH AUTOSEL 5.12 044/102] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]

The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a0..3dcb6e1f49bc 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b4488..a64364443031 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@ &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0..f2384277d5dc 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d..df47ea59c9c4 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 045/102] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 5 ++---
 arch/arm/boot/dts/dra7-l4.dtsi            | 4 ++--
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..39eba2bc36dd 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -610,12 +610,11 @@ &mcasp3 {
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index a294a02f2d23..d1ff8a4121f5 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1315,7 +1315,7 @@ gpio8: gpio@0 {
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1348,7 +1348,7 @@ gpio2: gpio@0 {
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 046/102] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 ++++-
 arch/arm/boot/dts/am437x-l4.dtsi    | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 45cbc7fb557a..e2677682b540 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -813,11 +813,14 @@ &gpio4 {
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	sel-lcd-hdmi-hog {
 		/*
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc09770..a6f19ae7d3e6 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2070,7 +2070,7 @@ gpio4: gpio@0 {
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 047/102] ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit d7d30b8fcd111e9feb171023c0e0c8d855582dcb ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-baltos.dtsi              | 4 ++--
 arch/arm/boot/dts/am335x-evmsk.dts                | 2 +-
 arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 2 +-
 arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi | 2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi                  | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 3ea286180382..1103a2cb836f 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@ &aes {
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index d5f8d5e2eb5d..45bf0273ecd8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -646,7 +646,7 @@ &aes {
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@ &aes {
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@ &aes {
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 1fb22088caeb..d45b858db303 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1789,7 +1789,7 @@ gpio2: gpio@0 {
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 048/102] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names

[Sasha Levin]

From: Suman Anna <s-anna@ti.com>

[ Upstream commit 9e7f5ee1137397def6580461e27e5efcb68183ee ]

A number of sub-mailbox node names in various OMAP2+ dts files are
currently using underscores. This is not adhering to the node name
convention, fix all of these to use hiphens.

These nodes are already using the prefix mbox, so they will be in
compliance with the sub-mailbox node name convention being added in
the OMAP Mailbox YAML binding as well.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts   | 8 ++++----
 arch/arm/boot/dts/dm816x.dtsi               | 2 +-
 arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi  | 6 +++---
 arch/arm/boot/dts/dra72x.dtsi               | 6 +++---
 arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi | 2 +-
 arch/arm/boot/dts/dra74x.dtsi               | 8 ++++----
 arch/arm/boot/dts/omap4-l4.dtsi             | 4 ++--
 arch/arm/boot/dts/omap5-l4.dtsi             | 4 ++--
 8 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 39eba2bc36dd..aed81568a297 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@ &sata {
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@ mailbox: mailbox@480c8000 {
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index d403acc754b6..85ab1f46e56b 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@ &dss {
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index e1850d6c841a..411ad295c201 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -188,12 +188,12 @@ &dss {
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -201,12 +201,12 @@ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index e0bb60a30779..6a5cb4862144 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -598,11 +598,11 @@ mailbox: mailbox@0 {
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 887b3359dd5a..e97c7038c1cd 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -613,11 +613,11 @@ mailbox: mailbox@0 {
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
-- 
2.30.2

[PATCH AUTOSEL 5.12 049/102] arm64: tegra: Add PMU node for Tegra194

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit 9e79e58f330ea4860f2ced65a8a35dfb05fc03c1 ]

Populate the device-tree node for the PMU device on Tegra194. This also
fixes the following warning that is observed on booting Tegra194.

 ERR KERN kvm: pmu event creation failed -2

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9449156fae39..2e40b6047283 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -2345,6 +2345,20 @@ l3c: l3-cache {
 		};
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1
+				      &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		status = "okay";
-- 
2.30.2

[PATCH AUTOSEL 5.12 050/102] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 69db725cdb2b803af67897a08ea54467d11f6020 ]

The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although
this does not make any difference functionality wise it's better to update
to avoid confusion.

Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output
in K3 am654x/j721e/j7200 board files.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210526132041.6104-1-grygorii.strashko@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts        | 2 +-
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 +-
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index fe3043943906..4672c43e4fe7 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -142,7 +142,7 @@ AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
 			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
 			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
 			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
-			AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
 			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
 		>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 4a7182abccf5..136c79222fb5 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -31,7 +31,7 @@ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
 			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 60764366e22b..351bb84db65b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -237,7 +237,7 @@ J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
 			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
-- 
2.30.2

[PATCH AUTOSEL 5.12 051/102] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 5f45da704de425d74abd75feaa928fc8a3df03ba ]

All Tegra boards which use WM8903 audio codec are specifying a wrong
polarity for the headphones detection GPIO. The kernel driver hardcodes
the polarity to active-low, which is the correct polarity, so we can fix
the device-trees safely.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 2 +-
 arch/arm/boot/dts/tegra20-harmony.dts           | 2 +-
 arch/arm/boot/dts/tegra20-medcom-wide.dts       | 2 +-
 arch/arm/boot/dts/tegra20-plutux.dts            | 2 +-
 arch/arm/boot/dts/tegra20-seaboard.dts          | 2 +-
 arch/arm/boot/dts/tegra20-tec.dts               | 2 +-
 arch/arm/boot/dts/tegra20-ventana.dts           | 2 +-
 arch/arm/boot/dts/tegra30-cardhu.dtsi           | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index f9c0f6884cc1..844d79fb3fdd 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1027,7 +1027,7 @@ sound {
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
 		nvidia,headset;
 
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb4d5a1..ae4312eedcbd 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -748,7 +748,7 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca30e522..b31c9bca16e6 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -84,7 +84,7 @@ sound {
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2958b..5811b7006a9b 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@ sound {
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a37613e..92d494b8c3d2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -911,7 +911,7 @@ sound {
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60315de..10ff09d86efa 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 055334ae3d28..fe400fb84f02 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -686,7 +686,7 @@ sound {
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index dab9989fa760..57aead7d8162 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -589,7 +589,7 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 052/102] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit c4dd6066bc304649e3159f1c7a08ece25d537e00 ]

The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator.
Both regulators are always-on, nevertheless the DT model needs to be
corrected, fix it.

Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index bfc06b988781..215e497652d8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -143,7 +143,7 @@ vdd_core: core-regulator@60 {
 	};
 
 	vdd_3v3_sys: regulator@1 {
-		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
-- 
2.30.2

[PATCH AUTOSEL 5.12 053/102] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 0a275a35ceab07cb622ff212c54d6866e246ac53 ]

Fix the compatible to make the driver probe and tell the
driver where to look for the "xo" clock to make sure everything
works.

Then we get a happy (eh, happier) 8996:

somainline-sdcard:/home/konrad# cat /sys/kernel/debug/clk/pwrcl_pll/clk_rate
1152000000

Don't backport without "arm64: dts: qcom: msm8996: Add CPU opps", as
the system fails to boot without consumers for these clocks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210527192958.775434-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..dd89d3cb772b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1745,9 +1745,14 @@ apss_merge_funnel_out: endpoint {
 				};
 			};
 		};
+
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo";
+			clocks = <&xo_board>;
+
 			#clock-cells = <1>;
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 054/102] arm64: dts: qcom: sc7180: Move rmtfs memory region

[Sasha Levin]

From: Sujit Kautkar <sujitka@chromium.org>

[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ]

Move rmtfs memory region so that it does not overlap with system
RAM (kernel data) when KAsan is enabled. This puts rmtfs right
after mba_mem which is not supposed to increase beyond 0x94600000

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a..afe0f9c25816 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -45,7 +45,7 @@ chosen {
 
 /* Increase the size from 2MB to 8MB */
 &rmtfs_mem {
-	reg = <0x0 0x84400000 0x0 0x800000>;
+	reg = <0x0 0x94600000 0x0 0x800000>;
 };
 
 / {
-- 
2.30.2

[PATCH AUTOSEL 5.12 055/102] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 28b9a4679d8074512f12967497c161b992eb3b75 ]

Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5523f4138fd6..0fbf9913e8df 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -34,7 +34,6 @@ display_bl: display-bl {
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
@@ -60,7 +59,6 @@ button-2 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
 
 		button-1 {
 			label = "TA2-GPIO-B";
-- 
2.30.2

[PATCH AUTOSEL 5.12 056/102] ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 4b5fadef3fc2ab8863ffdf31eed6a745b1bf6e61 ]

Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06']

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 0fbf9913e8df..b8c8f0b284c3 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -182,8 +182,8 @@ sgtl5000_rx_endpoint: endpoint@1 {
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-- 
2.30.2

[PATCH AUTOSEL 5.12 057/102] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin

[Sasha Levin]

From: Grzegorz Szymaszek <gszymaszek@short.pl>

[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ]

The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-odyssey.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..be1dd5e9e744 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 058/102] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ]

Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.

Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32429i-eval.dts  | 8 +++-----
 arch/arm/boot/dts/stm32746g-eval.dts  | 6 ++----
 arch/arm/boot/dts/stm32f429-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f469-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f769-disco.dts | 6 ++----
 5 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7e10ae744c9d..9ac1ffe53413 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -119,17 +119,15 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192449ee..327613fd9666 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b91ca1..075ac57d0bf4 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@ led-green {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bbbe4b5..8c982ae79f43 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc20fa4..be943b701980 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@ led-red {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 059/102] ARM: dts: stm32: fix RCC node name on stm32f429 MCU

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ]

This prevent warning observed with "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format
error, expected "40023800"

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index f6530d724d00..41e0087bdbf9 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -709,7 +709,7 @@ crc: crc@40023000 {
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
-- 
2.30.2

[PATCH AUTOSEL 5.12 060/102] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ]

Prevent warning seen with "make dtbs_check W=1" command:

Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 --------
 arch/arm/boot/dts/stm32f746.dtsi | 8 --------
 arch/arm/boot/dts/stm32h743.dtsi | 4 ----
 3 files changed, 20 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 41e0087bdbf9..8748d5850298 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index e1df603fc981..72c1b76684b6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -531,8 +527,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 4ebffb0a45a3..abe17a83aeac 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -454,8 +454,6 @@ trigger@2 {
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -470,8 +468,6 @@ pwm {
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 061/102] memory: tegra: Fix compilation warnings on 64bit platforms

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit e0740fb869730110b36a4afcf05ad1b9d6f5fb6d ]

Fix compilation warning on 64bit platforms caused by implicit promotion
of 32bit signed integer to a 64bit unsigned value which happens after
enabling compile-testing of the EMC drivers.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/tegra/tegra124-emc.c | 4 ++--
 drivers/memory/tegra/tegra30-emc.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index bee8d9f79b04..865a81cf362f 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -272,8 +272,8 @@
 #define EMC_PUTERM_ADJ				0x574
 
 #define DRAM_DEV_SEL_ALL			0
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 
 #define EMC_CFG_POWER_FEATURES_MASK		\
 	(EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index 6985da0ffb35..802f93411f7f 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -150,8 +150,8 @@
 #define EMC_SELF_REF_CMD_ENABLED		BIT(0)
 
 #define DRAM_DEV_SEL_ALL			(0 << 30)
-#define DRAM_DEV_SEL_0				(2 << 30)
-#define DRAM_DEV_SEL_1				(1 << 30)
+#define DRAM_DEV_SEL_0				BIT(31)
+#define DRAM_DEV_SEL_1				BIT(30)
 #define DRAM_BROADCAST(num) \
 	((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 062/102] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig

[Sasha Levin]

From: Etienne Carriere <etienne.carriere@linaro.org>

[ Upstream commit c05b07963e965ae34e75ee8c33af1095350cd87e ]

ARM_SCMI_PROTOCOL depends on either MAILBOX or HAVE_ARM_SMCCC_DISCOVERY,
not MAILBOX alone. Fix the depedency in Kconfig file and driver to
reflect the same.

Link: https://lore.kernel.org/r/20210521134055.24271-1-etienne.carriere@linaro.org
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[sudeep.holla: Minor tweaks to subject and change log]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/Kconfig           | 2 +-
 drivers/firmware/arm_scmi/common.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 5dd19dbd67a3..6f24b0429f36 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@ menu "Firmware Drivers"
 config ARM_SCMI_PROTOCOL
 	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST
-	depends on MAILBOX
+	depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
 	help
 	  ARM System Control and Management Interface (SCMI) protocol is a
 	  set of operating system-independent software interfaces that are
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index c0fb45e7c3e8..9c1f06759536 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -244,7 +244,7 @@ struct scmi_desc {
 };
 
 extern const struct scmi_desc scmi_mailbox_desc;
-#ifdef CONFIG_HAVE_ARM_SMCCC
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 extern const struct scmi_desc scmi_smc_desc;
 #endif
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 063/102] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit ab7766b72855e6a68109b915d071181b93086e29 ]

0day CI kernel test robot reported following build error with randconfig

aarch64-linux-ld: drivers/firmware/arm_scmi/driver.o:(.rodata+0x1e0):
		undefined reference to `scmi_mailbox_desc'

Fix the error by adding CONFIG_MAILBOX dependency for scmi_mailbox_desc.

Link: https://lore.kernel.org/r/20210603072631.1660963-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/driver.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index cacdf1589b10..a309622ea5c1 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -919,7 +919,9 @@ ATTRIBUTE_GROUPS(versions);
 
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
 #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 #endif
-- 
2.30.2

[PATCH AUTOSEL 5.12 064/102] ARM: dts: bcm283x: Fix up MMC node names

[Sasha Levin]

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit f230c32349eb0a43a012a81c08a7f13859b86cbb ]

Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711.dtsi | 2 +-
 arch/arm/boot/dts/bcm283x.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec54d61..d872064db761 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -413,7 +413,7 @@ emmc2bus: emmc2bus {
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..0f3be55201a5 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -420,7 +420,7 @@ pwm: pwm@7e20c000 {
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 065/102] ARM: dts: bcm283x: Fix up GPIO LED node names

[Sasha Levin]

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ]

Fix the node names for the GPIO LEDs to conform to the standard node
name led-..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 2 +-
 15 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3b4ab947492a..27d2f859adfc 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -29,11 +29,11 @@ aliases {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1b63d6b19750 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..33b2b77aa47d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@ chosen {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@ / {
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..61010266ca9a 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@ leds {
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
-- 
2.30.2

[PATCH AUTOSEL 5.12 066/102] i3c: master: svc: drop free_irq of devm_request_irq allocated irq

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 59a61e69c4252b4e8ecd15e752b0d2337f0121b7 ]

irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in svc_i3c_master_remove().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/svc-i3c-master.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 8d990696676e..014936120f4a 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1449,7 +1449,6 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	free_irq(master->irq, master);
 	clk_disable_unprepare(master->pclk);
 	clk_disable_unprepare(master->fclk);
 	clk_disable_unprepare(master->sclk);
-- 
2.30.2

[PATCH AUTOSEL 5.12 067/102] arm64: dts: juno: Update SCPI nodes as per the YAML schema

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ]

The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.

Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f6c55877fbd9..2c0161125ece 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -564,13 +564,13 @@ scpi {
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
@@ -578,7 +578,7 @@ scpi_clk: scpi-clk {
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 068/102] ARM: dts: rockchip: fix supply properties in io-domains nodes

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ]

A test with rockchip-io-domain.yaml gives notifications
for supply properties in io-domains nodes.
Fix them all into ".*-supply$" format.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +-
 arch/arm/boot/dts/rk3288-vyasa.dts      | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6f83b1..76363b8afcb9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@ &io_domains {
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8ed4ca0..b156a83eb7d7 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@ &io_domains {
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 069/102] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ]

Replace upper case by lower case in i2c nodes name.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f746.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 72c1b76684b6..014b416f57e6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -360,9 +360,9 @@ i2c2: i2c@40005800 {
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 070/102] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ]

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4b8031782555..1f05bb360e18 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1405,12 +1405,6 @@ crc1: crc@58009000 {
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1434,6 +1428,12 @@ ethernet0: ethernet@5800a000 {
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb@5800c000 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 071/102] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply

[Sasha Levin]

From: Grzegorz Szymaszek <gszymaszek@short.pl>

[ Upstream commit f493162319788802b6a49634f7268e691b4c10ec ]

The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..b5601d270c8f 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -269,7 +269,7 @@ &sdmmc2 {
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
-- 
2.30.2

[PATCH AUTOSEL 5.12 072/102] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 5247a50c8b53ca214a488da648e1bb35c35c2597 ]

Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index b8c8f0b284c3..c5ea08fec535 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -187,7 +187,6 @@ touchscreen@38 {
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
 	};
 };
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 073/102] ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit b586250df24226f8a257e11e1f5953054c54fd35 ]

Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 2617815e42a6..1c1c4198f2c1 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -140,7 +140,7 @@ &fmc {
 	pinctrl-1 = <&fmc_sleep_pins_b>;
 	status = "okay";
 
-	ksz8851: ks8851mll@1,0 {
+	ksz8851: ethernet@1,0 {
 		compatible = "micrel,ks8851-mll";
 		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
 		interrupt-parent = <&gpioc>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 074/102] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 9b8a9b389d8464e1ca5a4e92c6a4422844ad4ef3 ]

Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 1c1c4198f2c1..6c8930fc1632 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -367,7 +367,7 @@ &qspi {
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 803eb8bc9c85..a9eb82b2f170 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -194,7 +194,7 @@ &qspi {
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-- 
2.30.2

[PATCH AUTOSEL 5.12 075/102] ARM: dts: stm32: fix stpmic node for stm32mp1 boards

[Sasha Levin]

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 4bf4abe19089245b7b12f35e5cafb5477b3e2c48 ]

On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:

-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi   | 7 ++-----
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 5 +----
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi   | 5 +----
 arch/arm/boot/dts/stm32mp15xx-osd32.dtsi       | 7 ++-----
 4 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b2ef93..a4b14ef3caee 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index b5601d270c8f..2d9461006810 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +195,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +210,7 @@ vbus_otg: pwr_sw1 {
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 6c8930fc1632..b5a594c8f831 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -263,8 +263,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -286,7 +284,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -302,7 +299,7 @@ vbus_otg: pwr_sw1 {
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +169,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +179,13 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 076/102] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 093a474ce10d8ea3db3ef2922aca5a38f34bab1b ]

If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.

When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/pm33xx-core.c | 40 +++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0bcae5a..bf0d25fd2cea 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,44 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +376,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.12 077/102] soc/tegra: fuse: Fix Tegra234-only builds

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit e2d0ee225e49a5553986f3138dd2803852a31fd5 ]

The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/fuse/fuse-tegra30.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index 9ea7f0168457..c1aa7815bd6e 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -37,7 +37,8 @@
     defined(CONFIG_ARCH_TEGRA_132_SOC) || \
     defined(CONFIG_ARCH_TEGRA_210_SOC) || \
     defined(CONFIG_ARCH_TEGRA_186_SOC) || \
-    defined(CONFIG_ARCH_TEGRA_194_SOC)
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC)
 static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
 {
 	if (WARN_ON(!fuse->base))
-- 
2.30.2

[PATCH AUTOSEL 5.12 078/102] firmware: tegra: bpmp: Fix Tegra234-only builds

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit bd778b893963d67d7eb01f49d84ffcd3eaf229dd ]

The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/tegra/Makefile       | 1 +
 drivers/firmware/tegra/bpmp-private.h | 3 ++-
 drivers/firmware/tegra/bpmp.c         | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 49c87e00fafb..620cf3fdd607 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -3,6 +3,7 @@ tegra-bpmp-y			= bpmp.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC)	+= bpmp-tegra210.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
 obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
 obj-$(CONFIG_TEGRA_IVC)		+= ivc.o
diff --git a/drivers/firmware/tegra/bpmp-private.h b/drivers/firmware/tegra/bpmp-private.h
index 54d560c48398..182bfe396516 100644
--- a/drivers/firmware/tegra/bpmp-private.h
+++ b/drivers/firmware/tegra/bpmp-private.h
@@ -24,7 +24,8 @@ struct tegra_bpmp_ops {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
 #endif
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 0742a90cb844..5654c5e9862b 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -809,7 +809,8 @@ static const struct dev_pm_ops tegra_bpmp_pm_ops = {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 static const struct tegra_bpmp_soc tegra186_soc = {
 	.channels = {
 		.cpu_tx = {
-- 
2.30.2

[PATCH AUTOSEL 5.12 079/102] arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory

[Sasha Levin]

From: Punit Agrawal <punitagrawal@gmail.com>

[ Upstream commit 8efe01b4386ab38a36b99cfdc1dc02c38a8898c3 ]

The PCIe host bridge on RK3399 advertises a single 64-bit memory
address range even though it lies entirely below 4GB.

Previously the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), but since commit 9d57e61bf723 ("of/pci:
Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
the code takes a stricter view and treats the ranges as advertised in
the device tree (i.e, as 64-bit).

The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.

Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf723.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210607112856.3499682-5-punitagrawal@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index b265cc1b558d..62846464a885 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -230,7 +230,7 @@ pcie0: pcie@f8000000 {
 		       <&pcie_phy 2>, <&pcie_phy 3>;
 		phy-names = "pcie-phy-0", "pcie-phy-1",
 			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
 			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
 		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
 			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
-- 
2.30.2

[PATCH AUTOSEL 5.12 080/102] arm64: dts: ls208xa: remove bus-num from dspi node

[Sasha Levin]

From: Mian Yousaf Kaukab <ykaukab@suse.de>

[ Upstream commit 8240c972c1798ea013cbb407722295fc826b3584 ]

On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:

[   10.471363] couldn't get idr
[   10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[   10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[   10.471708] fsl-dspi: probe of 2100000.spi failed with error -16

Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 135ac8210871..801ba9612d36 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -929,7 +929,6 @@ dspi: spi@2100000 {
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
-			bus-num = <0>;
 		};
 
 		esdhc: esdhc@2140000 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 081/102] arm64: dts: imx8mn-beacon-som: Assign PMIC clock

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit 1de3aa8611d21d6be546ca1cd13ee05bdd650018 ]

The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index de2cd0e3201c..8cd9a35afd0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -120,6 +120,9 @@ pmic@4b {
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
 
 		regulators {
 			buck1_reg: BUCK1 {
-- 
2.30.2

[PATCH AUTOSEL 5.12 082/102] arm64: dts: imx8mq: assign PCIe clocks

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ]

This fixes multiple issues with the current non-existent PCIe clock setup:

The controller can run at up to 250MHz, so use a parent that provides this
clock.

The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.

The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 17c449e12c2e..91df9c5350ae 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1383,6 +1383,14 @@ pcie0: pcie@33800000 {
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
@@ -1413,6 +1421,14 @@ pcie1: pcie@33c00000 {
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 083/102] thermal/core: Correct function name thermal_zone_device_unregister()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 996c038f83a4..d1b85fc6f9be 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1380,7 +1380,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 /**
- * thermal_device_unregister - removes the registered thermal zone device
+ * thermal_zone_device_unregister - removes the registered thermal zone device
  * @tz: the thermal zone device to remove
  */
 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
-- 
2.30.2

[PATCH AUTOSEL 5.12 084/102] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3ae5950db617d1cc3eb4eb55750fa9d138529b49 ]

With -Wshadow:

    drivers/thermal/rcar_gen3_thermal.c: In function ‘rcar_gen3_thermal_probe’:
    drivers/thermal/rcar_gen3_thermal.c:310:13: warning: declaration of ‘rcar_gen3_ths_tj_1’ shadows a global declaration [-Wshadow]
      310 |  const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
	  |             ^~~~~~~~~~~~~~~~~~
    drivers/thermal/rcar_gen3_thermal.c:246:18: note: shadowed declaration is here
      246 | static const int rcar_gen3_ths_tj_1 = 126;
	  |                  ^~~~~~~~~~~~~~~~~~

To add to the confusion, the local variable has a different type.

Fix the shadowing by renaming the local variable to ths_tj_1.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/9ea7e65d0331daba96f9a7925cb3d12d2170efb1.1623076804.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 75c69fe6e955..f732735d98ec 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -306,7 +306,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
+	const int *ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
 	int ret, i;
@@ -351,8 +351,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
-					     *rcar_gen3_ths_tj_1);
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
-- 
2.30.2

[PATCH AUTOSEL 5.12 085/102] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit 3da97620e8d60da4a7eaae46e03e0a494780642d ]

Early exits from for_each_available_child_of_node() should decrement the
node reference counter.  Reported by Coccinelle:

  drivers/thermal/imx_sc_thermal.c:93:1-33: WARNING:
    Function "for_each_available_child_of_node" should have of_node_put() before return around line 97.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210614192230.19248-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/imx_sc_thermal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index b01d28eca7ee..8d76dbfde6a9 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -93,6 +93,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(np, child) {
 		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
 		if (!sensor) {
+			of_node_put(child);
 			of_node_put(sensor_np);
 			return -ENOMEM;
 		}
@@ -104,6 +105,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get valid sensor resource id: %d\n",
 				ret);
+			of_node_put(child);
 			break;
 		}
 
@@ -114,6 +116,7 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 		if (IS_ERR(sensor->tzd)) {
 			dev_err(&pdev->dev, "failed to register thermal zone\n");
 			ret = PTR_ERR(sensor->tzd);
+			of_node_put(child);
 			break;
 		}
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 086/102] thermal/drivers/sprd: Add missing of_node_put for loop iteration

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit d8ac5bb4ae653e092d7429a7587b73f1662d6ad7 ]

Early exits from for_each_available_child_of_node() should decrement the
node reference counter.  Reported by Coccinelle:

  drivers/thermal/sprd_thermal.c:387:1-23: WARNING:
    Function "for_each_child_of_node" should have of_node_put() before goto around lines 391.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210614192230.19248-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/sprd_thermal.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
index 3682edb2f466..76a2caa9c265 100644
--- a/drivers/thermal/sprd_thermal.c
+++ b/drivers/thermal/sprd_thermal.c
@@ -388,7 +388,7 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
 		if (!sen) {
 			ret = -ENOMEM;
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sen->data = thm;
@@ -397,13 +397,13 @@ static int sprd_thm_probe(struct platform_device *pdev)
 		ret = of_property_read_u32(sen_child, "reg", &sen->id);
 		if (ret) {
 			dev_err(&pdev->dev, "get sensor reg failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
 		if (ret) {
 			dev_err(&pdev->dev, "efuse cal analysis failed");
-			goto disable_clk;
+			goto of_put;
 		}
 
 		sprd_thm_sensor_init(thm, sen);
@@ -416,19 +416,20 @@ static int sprd_thm_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "register thermal zone failed %d\n",
 				sen->id);
 			ret = PTR_ERR(sen->tzd);
-			goto disable_clk;
+			goto of_put;
 		}
 
 		thm->sensor[sen->id] = sen;
 	}
+	/* sen_child set to NULL at this point */
 
 	ret = sprd_thm_set_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	ret = sprd_thm_wait_temp_ready(thm);
 	if (ret)
-		goto disable_clk;
+		goto of_put;
 
 	for (i = 0; i < thm->nr_sensors; i++)
 		sprd_thm_toggle_sensor(thm->sensor[i], true);
@@ -436,6 +437,8 @@ static int sprd_thm_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, thm);
 	return 0;
 
+of_put:
+	of_node_put(sen_child);
 disable_clk:
 	clk_disable_unprepare(thm->clk);
 	return ret;
-- 
2.30.2

[PATCH AUTOSEL 5.12 087/102] arm64: dts: qcom: sm8250: Fix pcie2_lane unit address

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit dc2f86369b157dfe4dccd31497d2e3c541e7239d ]

The previous one was likely a mistaken copy from pcie1_lane.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210613185334.306225-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 46a6c18cea91..ee11a6d143e4 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1509,7 +1509,7 @@ pcie2_phy: phy@1c16000 {
 
 			status = "disabled";
 
-			pcie2_lane: lanes@1c0e200 {
+			pcie2_lane: lanes@1c16200 {
 				reg = <0 0x1c16200 0 0x170>, /* tx0 */
 				      <0 0x1c16400 0 0x200>, /* rx0 */
 				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-- 
2.30.2

[PATCH AUTOSEL 5.12 088/102] arm64: dts: qcom: sm8150: Disable Adreno and modem by default

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit b1dc3c6b3dabbedaf896a3c1a998da191c311c70 ]

Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.

Not enabling modem back on the HDK, as it uses a sa8150.

Also fixed a sorting mistake in both boards' dt while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 10 +++++++++-
 arch/arm64/boot/dts/qcom/sm8150.dtsi    |  6 ++++++
 3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d987a1..50ee3bb97325 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,7 +354,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -372,6 +376,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e63416..7de54b2e497e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,7 +349,11 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
-&qupv3_id_1 {
+&gmu {
+	status = "okay";
+};
+
+&gpu {
 	status = "okay";
 };
 
@@ -367,6 +371,10 @@ resin {
 	};
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	status = "okay";
 	firmware-name = "qcom/sm8150/adsp.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 778613d3410b..468e57f48ad0 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -793,6 +793,8 @@ gpu: gpu@2c00000 {
 
 			qcom,gmu = <&gmu>;
 
+			status = "disabled";
+
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
@@ -860,6 +862,8 @@ gmu: gmu@2c6a000 {
 
 			operating-points-v2 = <&gmu_opp_table>;
 
+			status = "disabled";
+
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -947,6 +951,8 @@ remoteproc_mpss: remoteproc@4080000 {
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			status = "disabled";
+
 			glink-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 				label = "modem";
-- 
2.30.2

[PATCH AUTOSEL 5.12 089/102] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set

[Sasha Levin]

From: Matthias Maennich <maennich@google.com>

[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ]

To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.

If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.

Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.

[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html

Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mkcompile_h | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 4ae735039daf..a72b154de7b0 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -70,15 +70,23 @@ UTS_VERSION="$(echo $UTS_VERSION $CONFIG_FLAGS $TIMESTAMP | cut -b -$UTS_LEN)"
 # Only replace the real compile.h if the new one is different,
 # in order to preserve the timestamp and avoid unnecessary
 # recompilations.
-# We don't consider the file changed if only the date/time changed.
+# We don't consider the file changed if only the date/time changed,
+# unless KBUILD_BUILD_TIMESTAMP was explicitly set (e.g. for
+# reproducible builds with that value referring to a commit timestamp).
 # A kernel config change will increase the generation number, thus
 # causing compile.h to be updated (including date/time) due to the
 # changed comment in the
 # first line.
 
+if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then
+   IGNORE_PATTERN="UTS_VERSION"
+else
+   IGNORE_PATTERN="NOT_A_PATTERN_TO_BE_MATCHED"
+fi
+
 if [ -r $TARGET ] && \
-      grep -v 'UTS_VERSION' $TARGET > .tmpver.1 && \
-      grep -v 'UTS_VERSION' .tmpcompile > .tmpver.2 && \
+      grep -v $IGNORE_PATTERN $TARGET > .tmpver.1 && \
+      grep -v $IGNORE_PATTERN .tmpcompile > .tmpver.2 && \
       cmp -s .tmpver.1 .tmpver.2; then
    rm -f .tmpcompile
 else
-- 
2.30.2

[PATCH AUTOSEL 5.12 090/102] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme

[Sasha Levin]

From: Konstantin Porotchkin <kostap@marvell.com>

[ Upstream commit e3850467bf8c82de4a052619136839fe8054b774 ]

Eliminate 1MB gap between Linux and filesystem partitions.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/cn9130-db.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
index 79020e6d2792..741ae534b477 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -260,7 +260,7 @@ partition@0 {
 			};
 			partition@200000 {
 				label = "Linux";
-				reg = <0x200000 0xd00000>;
+				reg = <0x200000 0xe00000>;
 			};
 			partition@1000000 {
 				label = "Filesystem";
-- 
2.30.2

[PATCH AUTOSEL 5.12 091/102] rtc: max77686: Do not enforce (incorrect) interrupt trigger type

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 742b0d7e15c333303daad4856de0764f4bc83601 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-max77686.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d51cc12114cb..eae7cb9faf1e 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -717,8 +717,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
 
 add_rtc_irq:
 	ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, info->drv_data->rtc_irq_chip,
 				  &info->rtc_irq_data);
 	if (ret < 0) {
 		dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
-- 
2.30.2

[PATCH AUTOSEL 5.12 092/102] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 4b04ab8908f8..a396f048a031 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -493,7 +493,7 @@ ahc_inq(struct ahc_softc *ahc, u_int port)
 	return ((ahc_inb(ahc, port))
 	      | (ahc_inb(ahc, port+1) << 8)
 	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24)
+	      | (((uint64_t)ahc_inb(ahc, port+3)) << 24)
 	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
-- 
2.30.2

[PATCH AUTOSEL 5.12 093/102] scsi: libsas: Add LUN number check in .slave_alloc callback

[Sasha Levin]

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic94xx/aic94xx_init.c    | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 drivers/scsi/isci/init.c               | 1 +
 drivers/scsi/libsas/sas_scsi_host.c    | 9 +++++++++
 drivers/scsi/mvsas/mv_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_init.c      | 1 +
 8 files changed, 16 insertions(+)

diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a195bfe9eccc..7a78606598c4 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -53,6 +53,7 @@ static struct scsi_host_template aic94xx_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler	= sas_eh_device_reset_handler,
 	.eh_target_reset_handler	= sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3e359ac752fd..15eaac3a4eb6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1771,6 +1771,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 46f60fc2a069..9df1639ffa65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3584,6 +3584,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index b21246b1ba99..de23213945a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3147,6 +3147,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index c452849e7bb4..ffd33e5decae 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
 	.eh_abort_handler		= sas_eh_abort_handler,
 	.eh_device_reset_handler        = sas_eh_device_reset_handler,
 	.eh_target_reset_handler        = sas_eh_target_reset_handler,
+	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..ee44a0d7730b 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
 		blk_abort_request(sc->request);
 }
 
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+	if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+		return -ENXIO;
+
+	return 0;
+}
+
 void sas_target_destroy(struct scsi_target *starget)
 {
 	struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
 EXPORT_SYMBOL_GPL(sas_phy_reset);
 EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
 EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
 EXPORT_SYMBOL_GPL(sas_target_destroy);
 EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 6aa2697c4a15..b03c0f35d7b0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -46,6 +46,7 @@ static struct scsi_host_template mvs_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 4f3ec2bba8c9..18ea2a3e6b76 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -101,6 +101,7 @@ static struct scsi_host_template pm8001_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 #ifdef CONFIG_COMPAT
-- 
2.30.2

[PATCH AUTOSEL 5.12 094/102] scsi: be2iscsi: Fix some missing space in some messages

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c7fa2c855e892721bafafdf6393342c000e0ef77 ]

Fix a few style issues reported by checkpatch.pl:

 - Avoid duplicated word in comment.

 - Add missing space in messages.

 - Unneeded continuation line character.

 - Unneeded extra spaces.

 - Unneeded log message after memory allocation failure.

Link: https://lore.kernel.org/r/8cb62f0eb96ec7ce7a73fe97cb4490dd5121ecff.1623482155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/be2iscsi/be_main.c | 102 ++++++++++++--------------------
 1 file changed, 38 insertions(+), 64 deletions(-)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 90fcddb76f46..7c05672abc0a 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -143,8 +143,7 @@ DEVICE_ATTR(beiscsi_##_name, S_IRUGO | S_IWUSR,\
 	      beiscsi_##_name##_disp, beiscsi_##_name##_store)
 
 /*
- * When new log level added update the
- * the MAX allowed value for log_enable
+ * When new log level added update MAX allowed value for log_enable
  */
 BEISCSI_RW_ATTR(log_enable, 0x00,
 		0xFF, 0x00, "Enable logging Bit Mask\n"
@@ -825,9 +824,8 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 					  &phwi_context->be_eq[i]);
 			if (ret) {
 				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : beiscsi_init_irqs-Failed to"
-					    "register msix for i = %d\n",
-					    i);
+					    "BM_%d : %s-Failed to register msix for i = %d\n",
+					    __func__, i);
 				kfree(phba->msi_name[i]);
 				goto free_msix_irqs;
 			}
@@ -841,9 +839,9 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 		ret = request_irq(pci_irq_vector(pcidev, i), be_isr_mcc, 0,
 				  phba->msi_name[i], &phwi_context->be_eq[i]);
 		if (ret) {
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT ,
-				    "BM_%d : beiscsi_init_irqs-"
-				    "Failed to register beiscsi_msix_mcc\n");
+			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+				    "BM_%d : %s-Failed to register beiscsi_msix_mcc\n",
+				    __func__);
 			kfree(phba->msi_name[i]);
 			goto free_msix_irqs;
 		}
@@ -853,8 +851,8 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 				  "beiscsi", phba);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_init_irqs-"
-				    "Failed to register irq\\n");
+				    "BM_%d : %s-Failed to register irq\n",
+				    __func__);
 			return ret;
 		}
 	}
@@ -1030,7 +1028,7 @@ free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
 			       phba->params.wrbs_per_cxn);
 	beiscsi_log(phba, KERN_INFO,
 		    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-		    "BM_%d : FREE WRB: pwrb_handle=%p free_index=0x%x"
+		    "BM_%d : FREE WRB: pwrb_handle=%p free_index=0x%x "
 		    "wrb_handles_available=%d\n",
 		    pwrb_handle, pwrb_context->free_index,
 		    pwrb_context->wrb_handles_available);
@@ -1374,7 +1372,7 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
 			    "BM_%d :\t\t No HWH_TYPE_LOGIN Expected in"
-			    " hwi_complete_cmd- Solicited path\n");
+			    " %s- Solicited path\n", __func__);
 		break;
 
 	case HWH_TYPE_NOP:
@@ -1384,8 +1382,8 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 	default:
 		beiscsi_log(phba, KERN_WARNING,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
-			    "BM_%d : In hwi_complete_cmd, unknown type = %d"
-			    "wrb_index 0x%x CID 0x%x\n", type,
+			    "BM_%d : In %s, unknown type = %d "
+			    "wrb_index 0x%x CID 0x%x\n", __func__, type,
 			    csol_cqe.wrb_index,
 			    csol_cqe.cid);
 		break;
@@ -1883,9 +1881,9 @@ unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq, int budget)
 				cid = AMAP_GET_BITS(
 						    struct amap_i_t_dpdu_cqe_v2,
 						    cid, sol);
-			 else
-				 cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
-						     cid, sol);
+			else
+				cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						    cid, sol);
 		}
 
 		cri_index = BE_GET_CRI_FROM_CID(cid);
@@ -2010,8 +2008,7 @@ unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq, int budget)
 		default:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Invalid CQE Event Received Code : %d"
-				    "CID 0x%x...\n",
+				    "BM_%d : Invalid CQE Event Received Code : %d CID 0x%x...\n",
 				    code, cid);
 			break;
 		}
@@ -3001,7 +2998,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 	void *eq_vaddress;
 	dma_addr_t paddr;
 
-	num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
+	num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries *
 				      sizeof(struct be_eq_entry));
 
 	if (phba->pcidev->msix_enabled)
@@ -3034,8 +3031,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 					    BEISCSI_EQ_DELAY_DEF);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_cmd_eq_create"
-				    "Failed for EQ\n");
+				    "BM_%d : beiscsi_cmd_eq_create Failed for EQ\n");
 			goto create_eq_error;
 		}
 
@@ -3068,7 +3064,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 	int ret = -ENOMEM;
 	dma_addr_t paddr;
 
-	num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
+	num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries *
 				      sizeof(struct sol_cqe));
 
 	for (i = 0; i < phba->num_cpus; i++) {
@@ -3090,8 +3086,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 				    sizeof(struct sol_cqe), cq_vaddress);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : be_fill_queue Failed "
-				    "for ISCSI CQ\n");
+				    "BM_%d : be_fill_queue Failed for ISCSI CQ\n");
 			goto create_cq_error;
 		}
 
@@ -3100,8 +3095,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 					    false, 0);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_cmd_eq_create"
-				    "Failed for ISCSI CQ\n");
+				    "BM_%d : beiscsi_cmd_eq_create Failed for ISCSI CQ\n");
 			goto create_cq_error;
 		}
 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
@@ -3226,8 +3220,8 @@ beiscsi_create_def_data(struct beiscsi_hba *phba,
 		    phwi_context->be_def_dataq[ulp_num].id);
 
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-		    "BM_%d : DEFAULT PDU DATA RING CREATED"
-		    "on ULP : %d\n", ulp_num);
+		    "BM_%d : DEFAULT PDU DATA RING CREATED on ULP : %d\n",
+		    ulp_num);
 	return 0;
 }
 
@@ -3253,13 +3247,13 @@ beiscsi_post_template_hdr(struct beiscsi_hba *phba)
 
 			if (status != 0) {
 				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Post Template HDR Failed for"
+					    "BM_%d : Post Template HDR Failed for "
 					    "ULP_%d\n", ulp_num);
 				return status;
 			}
 
 			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-				    "BM_%d : Template HDR Pages Posted for"
+				    "BM_%d : Template HDR Pages Posted for "
 				    "ULP_%d\n", ulp_num);
 		}
 	}
@@ -3374,18 +3368,17 @@ beiscsi_create_wrb_rings(struct beiscsi_hba *phba,
 		} else {
 			idx++;
 			wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
-			pa_addr_lo = mem_descr->mem_array[idx].\
+			pa_addr_lo = mem_descr->mem_array[idx].
 					bus_address.u.a64.address;
 			num_wrb_rings = mem_descr->mem_array[idx].size /
 					(phba->params.wrbs_per_cxn *
 					sizeof(struct iscsi_wrb));
 			pwrb_arr[num].virtual_address = wrb_vaddr;
-			pwrb_arr[num].bus_address.u.a64.address\
-						= pa_addr_lo;
+			pwrb_arr[num].bus_address.u.a64.address = pa_addr_lo;
 			pwrb_arr[num].size = phba->params.wrbs_per_cxn *
 						 sizeof(struct iscsi_wrb);
 			wrb_vaddr += pwrb_arr[num].size;
-			pa_addr_lo   += pwrb_arr[num].size;
+			pa_addr_lo += pwrb_arr[num].size;
 			num_wrb_rings--;
 		}
 	}
@@ -3939,7 +3932,7 @@ static int beiscsi_init_sgl_handle(struct beiscsi_hba *phba)
 		idx++;
 	}
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-		    "BM_%d : phba->io_sgl_hndl_avbl=%d"
+		    "BM_%d : phba->io_sgl_hndl_avbl=%d "
 		    "phba->eh_sgl_hndl_avbl=%d\n",
 		    phba->io_sgl_hndl_avbl,
 		    phba->eh_sgl_hndl_avbl);
@@ -3997,13 +3990,8 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 					       GFP_KERNEL);
 
 			if (!ptr_cid_info) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Failed to allocate memory"
-					    "for ULP_CID_INFO for ULP : %d\n",
-					    ulp_num);
 				ret = -ENOMEM;
 				goto free_memory;
-
 			}
 
 			/* Allocate memory for CID array */
@@ -4012,10 +4000,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 					sizeof(*ptr_cid_info->cid_array),
 					GFP_KERNEL);
 			if (!ptr_cid_info->cid_array) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Failed to allocate memory"
-					    "for CID_ARRAY for ULP : %d\n",
-					    ulp_num);
 				kfree(ptr_cid_info);
 				ptr_cid_info = NULL;
 				ret = -ENOMEM;
@@ -4033,9 +4017,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 				 sizeof(struct iscsi_endpoint *),
 				 GFP_KERNEL);
 	if (!phba->ep_array) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to allocate memory in "
-			    "hba_setup_cid_tbls\n");
 		ret = -ENOMEM;
 
 		goto free_memory;
@@ -4045,10 +4026,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 				   sizeof(struct beiscsi_conn *),
 				   GFP_KERNEL);
 	if (!phba->conn_table) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to allocate memory in"
-			    "hba_setup_cid_tbls\n");
-
 		kfree(phba->ep_array);
 		phba->ep_array = NULL;
 		ret = -ENOMEM;
@@ -4401,7 +4378,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 		if (!io_task->psgl_handle) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Alloc of IO_SGL_ICD Failed"
+				    "BM_%d : Alloc of IO_SGL_ICD Failed "
 				    "for the CID : %d\n",
 				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_hndls;
@@ -4412,7 +4389,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 		if (!io_task->pwrb_handle) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Alloc of WRB_HANDLE Failed"
+				    "BM_%d : Alloc of WRB_HANDLE Failed "
 				    "for the CID : %d\n",
 				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_io_hndls;
@@ -4428,10 +4405,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_IO |
 						    BEISCSI_LOG_CONFIG,
-						    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+						    "BM_%d : Alloc of MGMT_SGL_ICD Failed "
 						    "for the CID : %d\n",
-						    beiscsi_conn->
-						    beiscsi_conn_cid);
+						    beiscsi_conn->beiscsi_conn_cid);
 					goto free_hndls;
 				}
 
@@ -4446,10 +4422,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_IO |
 						    BEISCSI_LOG_CONFIG,
-						    "BM_%d : Alloc of WRB_HANDLE Failed"
+						    "BM_%d : Alloc of WRB_HANDLE Failed "
 						    "for the CID : %d\n",
-						    beiscsi_conn->
-						    beiscsi_conn_cid);
+						    beiscsi_conn->beiscsi_conn_cid);
 					goto free_mgmt_hndls;
 				}
 				beiscsi_conn->plogin_wrb_handle =
@@ -4467,10 +4442,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 				beiscsi_log(phba, KERN_ERR,
 					    BEISCSI_LOG_IO |
 					    BEISCSI_LOG_CONFIG,
-					    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+					    "BM_%d : Alloc of MGMT_SGL_ICD Failed "
 					    "for the CID : %d\n",
-					    beiscsi_conn->
-					    beiscsi_conn_cid);
+					    beiscsi_conn->beiscsi_conn_cid);
 				goto free_hndls;
 			}
 			io_task->pwrb_handle =
@@ -4480,7 +4454,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 			if (!io_task->pwrb_handle) {
 				beiscsi_log(phba, KERN_ERR,
 					    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-					    "BM_%d : Alloc of WRB_HANDLE Failed"
+					    "BM_%d : Alloc of WRB_HANDLE Failed "
 					    "for the CID : %d\n",
 					    beiscsi_conn->beiscsi_conn_cid);
 				goto free_mgmt_hndls;
-- 
2.30.2

[PATCH AUTOSEL 5.12 095/102] scsi: libfc: Fix array index out of bound exception

[Sasha Levin]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]

Fix array index out of bound exception in fc_rport_prli_resp().

Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 56003208d2e7..06e75425d5e3 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -1162,6 +1162,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x spp_type 0x%x\n",
 			     pp->spp.spp_flags, pp->spp.spp_type);
+
 		rdata->spp_type = pp->spp.spp_type;
 		if (resp_code != FC_SPP_RESP_ACK) {
 			if (resp_code == FC_SPP_RESP_CONF)
@@ -1184,11 +1185,13 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		/*
 		 * Call prli provider if we should act as a target
 		 */
-		prov = fc_passive_prov[rdata->spp_type];
-		if (prov) {
-			memset(&temp_spp, 0, sizeof(temp_spp));
-			prov->prli(rdata, pp->prli.prli_spp_len,
-				   &pp->spp, &temp_spp);
+		if (rdata->spp_type < FC_FC4_PROV_SIZE) {
+			prov = fc_passive_prov[rdata->spp_type];
+			if (prov) {
+				memset(&temp_spp, 0, sizeof(temp_spp));
+				prov->prli(rdata, pp->prli.prli_spp_len,
+					   &pp->spp, &temp_spp);
+			}
 		}
 		/*
 		 * Check if the image pair could be established
-- 
2.30.2

[PATCH AUTOSEL 5.12 096/102] scsi: qedf: Add check to synchronize abort and flush

[Sasha Levin]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ]

A race condition was observed between qedf_cleanup_fcport() and
qedf_process_error_detect()->qedf_initiate_abts():

 [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0
 [2069091.233420] Oops: 0000 [#1] SMP
 [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P           OE  ------------   3.10.0-1160.25.1.el7.x86_64 #1
 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
 [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000
 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>]  [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.443666] RSP: 0018:ffff9bacaef9fdb8  EFLAGS: 00010246
 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310
 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8
 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000
 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18
 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040
 [2069091.529472] FS:  0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000
 [2069091.543926] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0
 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [2069091.602007] PKRU: 00000000
 [2069091.616010] Call Trace:
 [2069091.629902]  [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf]
 [2069091.643941]  [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf]
 [2069091.657948]  [<ffffffff85ebddcf>] process_one_work+0x17f/0x440
 [2069091.672111]  [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0
 [2069091.686057]  [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0
 [2069091.700033]  [<ffffffff85ec5da1>] kthread+0xd1/0xe0
 [2069091.713891]  [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40

Add check in qedf_process_error_detect(). When flush is active, let the
cmds be completed from the cleanup contex.

Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_io.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 4869ef813dc4..63f99f4eeed9 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1520,9 +1520,19 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 {
 	int rval;
 
+	if (io_req == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
+		return;
+	}
+
+	if (io_req->fcport == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "fcport is NULL.\n");
+		return;
+	}
+
 	if (!cqe) {
 		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
-			  "cqe is NULL for io_req %p\n", io_req);
+			"cqe is NULL for io_req %p\n", io_req);
 		return;
 	}
 
@@ -1538,6 +1548,16 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_buf_off),
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_id));
 
+	/* When flush is active, let the cmds be flushed out from the cleanup context */
+	if (test_bit(QEDF_RPORT_IN_TARGET_RESET, &io_req->fcport->flags) ||
+		(test_bit(QEDF_RPORT_IN_LUN_RESET, &io_req->fcport->flags) &&
+		 io_req->sc_cmd->device->lun == (u64)io_req->fcport->lun_reset_lun)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			"Dropping EQE for xid=0x%x as fcport is flushing",
+			io_req->xid);
+		return;
+	}
+
 	if (qedf->stop_io_on_error) {
 		qedf_stop_all_io(qedf);
 		return;
-- 
2.30.2

[PATCH AUTOSEL 5.12 097/102] sched/fair: Fix CFS bandwidth hrtimer expiry type

[Sasha Levin]

From: Odin Ugedal <odin@uged.al>

[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]

The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.

This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.

Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 47fcc3fe9dc5..e52144cf40a4 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5052,7 +5052,7 @@ static const u64 cfs_bandwidth_slack_period = 5 * NSEC_PER_MSEC;
 static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 {
 	struct hrtimer *refresh_timer = &cfs_b->period_timer;
-	u64 remaining;
+	s64 remaining;
 
 	/* if the call-back is running a quota refresh is already occurring */
 	if (hrtimer_callback_running(refresh_timer))
@@ -5060,7 +5060,7 @@ static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 
 	/* is a quota refresh about to occur? */
 	remaining = ktime_to_ns(hrtimer_expires_remaining(refresh_timer));
-	if (remaining < min_expire)
+	if (remaining < (s64)min_expire)
 		return 1;
 
 	return 0;
-- 
2.30.2

[PATCH AUTOSEL 5.12 098/102] perf/x86/intel/uncore: Clean up error handling path of iio mapping

[Sasha Levin]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit d4ba0b06306a70c99a43f9d452886a86e2d3bd26 ]

The error handling path of iio mapping looks fragile. We already fixed
one issue caused by it, commit f797f05d917f ("perf/x86/intel/uncore:
Fix for iio mapping on Skylake Server"). Clean up the error handling
path and make the code robust.

Reported-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/40e66cf9-398b-20d7-ce4d-433be6e08921@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore_snbep.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 9e1f64bc988b..f1c5d7cb7253 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3795,11 +3795,11 @@ static int skx_iio_set_mapping(struct intel_uncore_type *type)
 	/* One more for NULL. */
 	attrs = kcalloc((uncore_max_dies() + 1), sizeof(*attrs), GFP_KERNEL);
 	if (!attrs)
-		goto err;
+		goto clear_topology;
 
 	eas = kcalloc(uncore_max_dies(), sizeof(*eas), GFP_KERNEL);
 	if (!eas)
-		goto err;
+		goto clear_attrs;
 
 	for (die = 0; die < uncore_max_dies(); die++) {
 		sprintf(buf, "die%ld", die);
@@ -3820,7 +3820,9 @@ static int skx_iio_set_mapping(struct intel_uncore_type *type)
 	for (; die >= 0; die--)
 		kfree(eas[die].attr.attr.name);
 	kfree(eas);
+clear_attrs:
 	kfree(attrs);
+clear_topology:
 	kfree(type->topology);
 clear_attr_update:
 	type->attr_update = NULL;
-- 
2.30.2

[PATCH AUTOSEL 5.12 099/102] thermal/core/thermal_of: Stop zone device before unregistering it

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 5e5c9f9a75fc4532980c2e699caf8a36070a3a2e ]

Zone device is enabled after thermal_zone_of_sensor_register() completion,
but it's not disabled before senor is unregistered, leaving temperature
polling active. This results in accessing a disabled zone device and
produces a warning about this problem. Stop zone device before
unregistering it in order to fix this "use-after-free" problem.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210616190417.32214-3-digetx@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_of.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 5b76f9a1280d..6379f26a335f 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -559,6 +559,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
 	if (!tz)
 		return;
 
+	/* stop temperature polling */
+	thermal_zone_device_disable(tzd);
+
 	mutex_lock(&tzd->lock);
 	tzd->ops->get_temp = NULL;
 	tzd->ops->get_trend = NULL;
-- 
2.30.2

[PATCH AUTOSEL 5.12 100/102] s390/traps: do not test MONITOR CALL without CONFIG_BUG

[Sasha Levin]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit b8e9cc20b808e26329090c19ff80b7f5098e98ff ]

tinyconfig fails to boot, because without CONFIG_BUG report_bug()
always returns BUG_TRAP_TYPE_BUG, which causes mc 0,0 in
test_monitor_call() to panic. Fix by skipping the test without
CONFIG_BUG.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/traps.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index db7dd59b570c..c1b8d9170ba3 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -276,6 +276,8 @@ static void __init test_monitor_call(void)
 {
 	int val = 1;
 
+	if (!IS_ENABLED(CONFIG_BUG))
+		return;
 	asm volatile(
 		"	mc	0,0\n"
 		"0:	xgr	%0,%0\n"
-- 
2.30.2

[PATCH AUTOSEL 5.12 101/102] s390: introduce proper type handling call_on_stack() macro

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 41d71fe59cce41237f24f3b7bdc1b414069a34ed ]

The existing CALL_ON_STACK() macro allows for subtle bugs:

- There is no type checking of the function that is being called. That
  is: missing or too many arguments do not cause any compile error or
  warning. The same is true if the return type of the called function
  changes. This can lead to quite random bugs.

- Sign and zero extension of arguments is missing. Given that the s390
  C ABI requires that the caller of a function performs proper sign
  and zero extension this can also lead to subtle bugs.

- If arguments to the CALL_ON_STACK() macros contain functions calls
  register corruption can happen due to register asm constructs being
  used.

Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/stacktrace.h | 97 ++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h
index 76c6034428be..b4d936580fbf 100644
--- a/arch/s390/include/asm/stacktrace.h
+++ b/arch/s390/include/asm/stacktrace.h
@@ -129,6 +129,103 @@ struct stack_frame {
 	r2;								\
 })
 
+#define CALL_LARGS_0(...)						\
+	long dummy = 0
+#define CALL_LARGS_1(t1, a1)						\
+	long arg1  = (long)(t1)(a1)
+#define CALL_LARGS_2(t1, a1, t2, a2)					\
+	CALL_LARGS_1(t1, a1);						\
+	long arg2 = (long)(t2)(a2)
+#define CALL_LARGS_3(t1, a1, t2, a2, t3, a3)				\
+	CALL_LARGS_2(t1, a1, t2, a2);					\
+	long arg3 = (long)(t3)(a3)
+#define CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4)			\
+	CALL_LARGS_3(t1, a1, t2, a2, t3, a3);				\
+	long arg4  = (long)(t4)(a4)
+#define CALL_LARGS_5(t1, a1, t2, a2, t3, a3, t4, a4, t5, a5)		\
+	CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4);			\
+	long arg5 = (long)(t5)(a5)
+
+#define CALL_REGS_0							\
+	register long r2 asm("2") = dummy
+#define CALL_REGS_1							\
+	register long r2 asm("2") = arg1
+#define CALL_REGS_2							\
+	CALL_REGS_1;							\
+	register long r3 asm("3") = arg2
+#define CALL_REGS_3							\
+	CALL_REGS_2;							\
+	register long r4 asm("4") = arg3
+#define CALL_REGS_4							\
+	CALL_REGS_3;							\
+	register long r5 asm("5") = arg4
+#define CALL_REGS_5							\
+	CALL_REGS_4;							\
+	register long r6 asm("6") = arg5
+
+#define CALL_TYPECHECK_0(...)
+#define CALL_TYPECHECK_1(t, a, ...)					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_2(t, a, ...)					\
+	CALL_TYPECHECK_1(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_3(t, a, ...)					\
+	CALL_TYPECHECK_2(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_4(t, a, ...)					\
+	CALL_TYPECHECK_3(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_5(t, a, ...)					\
+	CALL_TYPECHECK_4(__VA_ARGS__);					\
+	typecheck(t, a)
+
+#define CALL_PARM_0(...) void
+#define CALL_PARM_1(t, a, ...) t
+#define CALL_PARM_2(t, a, ...) t, CALL_PARM_1(__VA_ARGS__)
+#define CALL_PARM_3(t, a, ...) t, CALL_PARM_2(__VA_ARGS__)
+#define CALL_PARM_4(t, a, ...) t, CALL_PARM_3(__VA_ARGS__)
+#define CALL_PARM_5(t, a, ...) t, CALL_PARM_4(__VA_ARGS__)
+#define CALL_PARM_6(t, a, ...) t, CALL_PARM_5(__VA_ARGS__)
+
+/*
+ * Use call_on_stack() to call a function switching to a specified
+ * stack. Proper sign and zero extension of function arguments is
+ * done. Usage:
+ *
+ * rc = call_on_stack(nr, stack, rettype, fn, t1, a1, t2, a2, ...)
+ *
+ * - nr specifies the number of function arguments of fn.
+ * - stack specifies the stack to be used.
+ * - fn is the function to be called.
+ * - rettype is the return type of fn.
+ * - t1, a1, ... are pairs, where t1 must match the type of the first
+ *   argument of fn, t2 the second, etc. a1 is the corresponding
+ *   first function argument (not name), etc.
+ */
+#define call_on_stack(nr, stack, rettype, fn, ...)			\
+({									\
+	rettype (*__fn)(CALL_PARM_##nr(__VA_ARGS__)) = fn;		\
+	unsigned long frame = current_frame_address();			\
+	unsigned long __stack = stack;					\
+	unsigned long prev;						\
+	CALL_LARGS_##nr(__VA_ARGS__);					\
+	CALL_REGS_##nr;							\
+									\
+	CALL_TYPECHECK_##nr(__VA_ARGS__);				\
+	asm volatile(							\
+		"	lgr	%[_prev],15\n"				\
+		"	lg	15,%[_stack]\n"				\
+		"	stg	%[_frame],%[_bc](15)\n"			\
+		"	brasl	14,%[_fn]\n"				\
+		"	lgr	15,%[_prev]\n"				\
+		: [_prev] "=&d" (prev), CALL_FMT_##nr			\
+		: [_stack] "R" (__stack),				\
+		  [_bc] "i" (offsetof(struct stack_frame, back_chain)),	\
+		  [_frame] "d" (frame),					\
+		  [_fn] "X" (__fn) : CALL_CLOBBER_##nr);		\
+	(rettype)r2;							\
+})
+
 #define CALL_ON_STACK_NORETURN(fn, stack)				\
 ({									\
 	asm volatile(							\
-- 
2.30.2

[PATCH AUTOSEL 5.12 102/102] cifs: prevent NULL deref in cifs_compose_mount_options()

[Sasha Levin]

From: Paulo Alcantara <pc@cjr.nz>

[ Upstream commit 03313d1c3a2f086bb60920607ab79ac8f8578306 ]

The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().

Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifs_dfs_ref.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 6b1ce4efb591..2891089aadbb 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -151,6 +151,9 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 		return ERR_PTR(-EINVAL);
 
 	if (ref) {
+		if (WARN_ON_ONCE(!ref->node_name || ref->path_consumed < 0))
+			return ERR_PTR(-EINVAL);
+
 		if (strlen(fullpath) - ref->path_consumed) {
 			prepath = fullpath + ref->path_consumed;
 			/* skip initial delimiter */
-- 
2.30.2