linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Stefan Wahren <stefan.wahren@i2se.com>,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	devicetree@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 57/88] ARM: dts: bcm283x: Fix up GPIO LED node names
Date: Wed, 14 Jul 2021 15:42:32 -0400	[thread overview]
Message-ID: <20210714194303.54028-57-sashal@kernel.org> (raw)
In-Reply-To: <20210714194303.54028-1-sashal@kernel.org>

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ]

Fix the node names for the GPIO LEDs to conform to the standard node
name led-..

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 4 ++--
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 2 +-
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi         | 2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 4 ++--
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 2 +-
 15 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 09a1182c2936..5395e8c2484e 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -28,11 +28,11 @@ aliases {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1b63d6b19750 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..33b2b77aa47d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@ chosen {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@ / {
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..61010266ca9a 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@ memory@0 {
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@ leds {
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
-- 
2.30.2


  parent reply	other threads:[~2021-07-14 19:52 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-14 19:41 [PATCH AUTOSEL 5.10 01/88] ARM: dts: gemini: rename mdio to the right name Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 02/88] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 03/88] ARM: dts: rockchip: Fix thermal sensor cells o rk322x Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 04/88] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 05/88] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 06/88] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 07/88] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 08/88] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 09/88] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 10/88] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 11/88] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 12/88] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 13/88] arm64: dts: rockchip: Fix power-controller node names for rk3399 Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 14/88] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 15/88] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 16/88] ARM: Cygnus: " Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 17/88] ARM: NSP: " Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 18/88] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 19/88] ARM: dts: Hurricane 2: " Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 20/88] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 21/88] ARM: dts: exynos: align Broadcom WiFi with dtschema Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 22/88] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 23/88] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
2021-07-14 19:41 ` [PATCH AUTOSEL 5.10 24/88] arm64: dts: rockchip: fix regulator-gpio states array Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 25/88] ARM: dts: ux500: Fix interrupt cells Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 26/88] ARM: dts: ux500: Rename gpio-controller node Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 27/88] ARM: dts: ux500: Fix orientation of accelerometer Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 28/88] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 29/88] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 30/88] arm64: dts: renesas: beacon: Fix USB extal reference Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 31/88] arm64: dts: renesas: beacon: Fix USB ref clock references Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 32/88] kbuild: sink stdout from cmd for silent build Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 33/88] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 34/88] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 35/88] ARM: dts: omap3: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 36/88] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 37/88] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 38/88] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 39/88] ARM: dts: am437x-gp-evm: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 40/88] ARM: dts: am335x: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 41/88] ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 42/88] arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 43/88] ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 44/88] ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 45/88] arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work) Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 46/88] arm64: dts: qcom: sc7180: Move rmtfs memory region Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 47/88] ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2 Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 48/88] ARM: dts: stm32: Fix touchscreen node " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 49/88] ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 50/88] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 51/88] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 52/88] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 53/88] memory: tegra: Fix compilation warnings on 64bit platforms Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 54/88] firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 55/88] firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 56/88] ARM: dts: bcm283x: Fix up MMC node names Sasha Levin
2021-07-14 19:42 ` Sasha Levin [this message]
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 58/88] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 59/88] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 60/88] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 61/88] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 62/88] ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 63/88] ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 64/88] ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 65/88] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 66/88] ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 67/88] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 68/88] firmware: tegra: bpmp: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 69/88] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 70/88] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 71/88] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 72/88] thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 73/88] thermal/drivers/imx_sc: Add missing of_node_put for loop iteration Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 74/88] thermal/drivers/sprd: " Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 75/88] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 76/88] arch/arm64/boot/dts/marvell: fix NAND partitioning scheme Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 77/88] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 78/88] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 79/88] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 80/88] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 81/88] scsi: libfc: Fix array index out of bound exception Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 82/88] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 83/88] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
2021-07-14 19:42 ` [PATCH AUTOSEL 5.10 84/88] perf/x86/intel/uncore: Clean up error handling path of iio mapping Sasha Levin
2021-07-14 19:43 ` [PATCH AUTOSEL 5.10 85/88] thermal/core/thermal_of: Stop zone device before unregistering it Sasha Levin
2021-07-14 19:43 ` [PATCH AUTOSEL 5.10 86/88] s390/traps: do not test MONITOR CALL without CONFIG_BUG Sasha Levin
2021-07-14 19:43 ` [PATCH AUTOSEL 5.10 87/88] s390: introduce proper type handling call_on_stack() macro Sasha Levin
2021-07-14 19:43 ` [PATCH AUTOSEL 5.10 88/88] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210714194303.54028-57-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenz@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).