linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name
@ 2021-07-14 19:44 Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
                   ` (49 more replies)
  0 siblings, 50 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Corentin Labbe, Linus Walleij, Sasha Levin, devicetree

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit fc5b59b945b546e27977e99a5ca6fe61179ff0d2 ]

ethernet-phy is not the right name for mdio, fix it.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
 arch/arm/boot/dts/gemini-nas4220b.dts      | 2 +-
 arch/arm/boot/dts/gemini-rut1xx.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd111.dts        | 2 +-
 arch/arm/boot/dts/gemini-wbd222.dts        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a02a48..d0bbf2b970df 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@ map1 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f38eed..e1020e07e136 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@ led-green-os {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..79f17988884f 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@ led-power {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@ led-greeb-l3 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@ led-green-l3 {
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
                   ` (48 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Corentin Labbe, Linus Walleij, Sasha Levin, devicetree

From: Corentin Labbe <clabbe@baylibre.com>

[ Upstream commit 483f3645b3f7acfd1c78a19d51b80c0656161974 ]

Fixes DT warning on pci node by adding the missing device_type.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 8cf67b11751f..ef4f1c5323bd 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@ pci@50000000 {
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
                   ` (47 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
	linux-rockchip, devicetree

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit dfbfb86a43f9a5bbd166d88bca9e07ee4e1bff31 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip ARM tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3036-kylin and rk3288

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036-kylin.dts | 2 +-
 arch/arm/boot/dts/rk3288.dtsi      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf005cc90..2ef47ebeb0cb 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@ sdmmc_pwr: sdmmc-pwr {
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cc893e154fe5..a452d4ea3938 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1575,7 +1575,7 @@ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
                   ` (46 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, devicetree,
	linux-arm-kernel, linux-rockchip

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit a7ecfad495f8af63a5cb332c91f60ab2018897f5 ]

A test with the command below aimed at powerpc generates
notifications in the Rockchip arm64 tree.

Fix pinctrl "sleep" nodename by renaming it to "suspend"
for rk3399.dtsi

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210126110221.10815-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 9d6ed8cda2c8..750dad0d1740 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2317,7 +2317,7 @@ sdmmc_wp: sdmmc-wp {
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (2 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
                   ` (45 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ezequiel Garcia, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
	linux-rockchip, devicetree

From: Ezequiel Garcia <ezequiel@collabora.com>

[ Upstream commit 7b46d674ac000b101fdad92cf16cc11d90b72f86 ]

Fixed order is the device-tree convention.
The timer driver currently gets clocks by name,
so no changes are needed there.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: https://lore.kernel.org/r/20210506111136.3941-3-ezequiel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 8 ++++----
 arch/arm/boot/dts/rk3288.dtsi | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 10ede65d90f3..41de555df844 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@ timer3: timer@2000e000 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index a452d4ea3938..6f145b82780d 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -238,8 +238,8 @@ timer: timer@ff810000 {
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (3 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
                   ` (44 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Benjamin Gaignard, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
	linux-rockchip, devicetree

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

[ Upstream commit 6b023929666f0be5df75f5e0278d1b70effadf42 ]

Add '#" to iommu-cells properties.
Remove useless interrupt-names properties

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk322x.dtsi | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 6bb78b19c555..140e22d74dcf 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -570,10 +570,9 @@ vpu_mmu: iommu@20020800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -581,10 +580,9 @@ vdec_mmu: iommu@20030480 {
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -614,7 +612,6 @@ vop_mmu: iommu@20053f00 {
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -625,10 +622,9 @@ iep_mmu: iommu@20070800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (4 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
                   ` (43 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Elaine Zhang, Enric Balletbo i Serra, Johan Jonker,
	Heiko Stuebner, Sasha Levin, linux-arm-kernel, linux-rockchip,
	devicetree

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit f2948781a72f0d8cf2adf31758c357f2f35e6c79 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3066a.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 3d1b02f45ffd..1ac9deb3bd39 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -761,7 +761,7 @@ power: power-controller {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -788,7 +788,7 @@ pd_vio@RK3066_PD_VIO {
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -797,7 +797,7 @@ pd_video@RK3066_PD_VIDEO {
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (5 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
                   ` (42 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Elaine Zhang, Enric Balletbo i Serra, Johan Jonker,
	Heiko Stuebner, Sasha Levin, linux-arm-kernel, linux-rockchip,
	devicetree

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d3bcbcd396175ac26aa54919c0b31c7d2878fc24 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 41de555df844..ee8a24a0e3cb 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -701,7 +701,7 @@ power: power-controller {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -723,7 +723,7 @@ pd_vio@RK3188_PD_VIO {
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -732,7 +732,7 @@ pd_video@RK3188_PD_VIDEO {
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (6 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
                   ` (41 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Elaine Zhang, Enric Balletbo i Serra, Johan Jonker,
	Heiko Stuebner, Sasha Levin, linux-arm-kernel, linux-rockchip,
	devicetree

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 970cdc53cb1afa73602028c103dbfb6a230080be ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6f145b82780d..658ceb96d8bd 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -771,7 +771,7 @@ power: power-controller {
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -813,7 +813,7 @@ pd_vio@RK3288_PD_VIO {
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -827,7 +827,7 @@ pd_hevc@RK3288_PD_HEVC {
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -838,7 +838,7 @@ pd_video@RK3288_PD_VIDEO {
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (7 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
                   ` (40 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Elaine Zhang, Enric Balletbo i Serra, Johan Jonker,
	Heiko Stuebner, Sasha Levin, devicetree, linux-arm-kernel,
	linux-rockchip

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit d5de0d688ac6e0202674577b05d0726b8a6af401 ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 98b014a8f916..f297601c9f71 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -213,20 +213,20 @@ power: power-controller {
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_usb@PX30_PD_USB {
+			power-domain@PX30_PD_USB {
 				reg = <PX30_PD_USB>;
 				clocks = <&cru HCLK_HOST>,
 					 <&cru HCLK_OTG>,
 					 <&cru SCLK_OTG_ADP>;
 				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
 			};
-			pd_sdcard@PX30_PD_SDCARD {
+			power-domain@PX30_PD_SDCARD {
 				reg = <PX30_PD_SDCARD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sdmmc>;
 			};
-			pd_gmac@PX30_PD_GMAC {
+			power-domain@PX30_PD_GMAC {
 				reg = <PX30_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>,
@@ -234,7 +234,7 @@ pd_gmac@PX30_PD_GMAC {
 					 <&cru SCLK_GMAC_RX_TX>;
 				pm_qos = <&qos_gmac>;
 			};
-			pd_mmc_nand@PX30_PD_MMC_NAND {
+			power-domain@PX30_PD_MMC_NAND {
 				reg = <PX30_PD_MMC_NAND>;
 				clocks =  <&cru HCLK_NANDC>,
 					  <&cru HCLK_EMMC>,
@@ -247,14 +247,14 @@ pd_mmc_nand@PX30_PD_MMC_NAND {
 				pm_qos = <&qos_emmc>, <&qos_nand>,
 					 <&qos_sdio>, <&qos_sfc>;
 			};
-			pd_vpu@PX30_PD_VPU {
+			power-domain@PX30_PD_VPU {
 				reg = <PX30_PD_VPU>;
 				clocks = <&cru ACLK_VPU>,
 					 <&cru HCLK_VPU>,
 					 <&cru SCLK_CORE_VPU>;
 				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
 			};
-			pd_vo@PX30_PD_VO {
+			power-domain@PX30_PD_VO {
 				reg = <PX30_PD_VO>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru ACLK_VOPB>,
@@ -270,7 +270,7 @@ pd_vo@PX30_PD_VO {
 				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
 					 <&qos_vop_m0>, <&qos_vop_m1>;
 			};
-			pd_vi@PX30_PD_VI {
+			power-domain@PX30_PD_VI {
 				reg = <PX30_PD_VI>;
 				clocks = <&cru ACLK_CIF>,
 					 <&cru ACLK_ISP>,
@@ -281,7 +281,7 @@ pd_vi@PX30_PD_VI {
 					 <&qos_isp_wr>, <&qos_isp_m1>,
 					 <&qos_vip>;
 			};
-			pd_gpu@PX30_PD_GPU {
+			power-domain@PX30_PD_GPU {
 				reg = <PX30_PD_GPU>;
 				clocks = <&cru SCLK_GPU>;
 				pm_qos = <&qos_gpu>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (8 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
                   ` (39 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Elaine Zhang, Enric Balletbo i Serra, Johan Jonker,
	Heiko Stuebner, Sasha Levin, devicetree, linux-arm-kernel,
	linux-rockchip

From: Elaine Zhang <zhangqing@rock-chips.com>

[ Upstream commit 6e6a282b49c6db408d27231e3c709fbdf25e3c1b ]

Use more generic names (as recommended in the device tree specification
or the binding documentation)

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210417112952.8516-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e0ed323935a4..44ad744c4710 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -270,13 +270,13 @@ power: power-controller {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pd_hevc@RK3328_PD_HEVC {
+			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 			};
-			pd_video@RK3328_PD_VIDEO {
+			power-domain@RK3328_PD_VIDEO {
 				reg = <RK3328_PD_VIDEO>;
 			};
-			pd_vpu@RK3328_PD_VPU {
+			power-domain@RK3328_PD_VPU {
 				reg = <RK3328_PD_VPU>;
 				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 			};
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (9 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
                   ` (38 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Philipp Zabel, Sasha Levin

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 05cf8fffcdeb47aef1203c08cbec5224fd3a0e1c ]

The to_ti_syscon_reset_data macro currently only works if the
parameter passed into it is called 'rcdev'.

Fixes a checkpatch --strict issue:

  CHECK: Macro argument reuse 'rcdev' - possible side-effects?
  #53: FILE: drivers/reset/reset-ti-syscon.c:53:
  +#define to_ti_syscon_reset_data(rcdev)	\
  +	container_of(rcdev, struct ti_syscon_reset_data, rcdev)

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-ti-syscon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
index a2635c21db7f..ecb8873e3a19 100644
--- a/drivers/reset/reset-ti-syscon.c
+++ b/drivers/reset/reset-ti-syscon.c
@@ -58,8 +58,8 @@ struct ti_syscon_reset_data {
 	unsigned int nr_controls;
 };
 
-#define to_ti_syscon_reset_data(rcdev)	\
-	container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+#define to_ti_syscon_reset_data(_rcdev)	\
+	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
 
 /**
  * ti_syscon_reset_assert() - assert device reset
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (10 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
                   ` (37 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafał Miłecki, Florian Fainelli, Sasha Levin,
	linux-arm-kernel, devicetree

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 9a800ce1aada6e0f56b78e4713f4858c8990c1f7 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 4 ++--
 arch/arm/boot/dts/bcm7445.dtsi             | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@ memory@0 {
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@ aon-ctrl@410000 {
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: dts: fix NAND nodes names
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (11 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
                   ` (36 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafał Miłecki, Florian Fainelli, Sasha Levin,
	devicetree, linux-arm-kernel

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit e256b48a3b07ee1ae4bfa60abbf509ba8e386862 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi      | 2 +-
 arch/arm/boot/dts/bcm911360_entphn.dts | 4 ++--
 arch/arm/boot/dts/bcm958300k.dts       | 4 ++--
 arch/arm/boot/dts/bcm958305k.dts       | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 1bc45cfd5453..9ca7b4241c97 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@ sdhci1: sdhci@18043000 {
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@ &uart3 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 15/51] ARM: NSP: dts: fix NAND nodes names
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (12 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
                   ` (35 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafał Miłecki, Florian Fainelli, Sasha Levin,
	devicetree, linux-arm-kernel

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi     | 2 +-
 arch/arm/boot/dts/bcm958522er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525er.dts  | 4 ++--
 arch/arm/boot/dts/bcm958525xmc.dts | 4 ++--
 arch/arm/boot/dts/bcm958622hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958623hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625hr.dts  | 4 ++--
 arch/arm/boot/dts/bcm958625k.dts   | 4 ++--
 arch/arm/boot/dts/bcm988312hr.dts  | 4 ++--
 9 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 8615d89fa469..43ff85d31dc1 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -267,7 +267,7 @@ mailbox: mailbox@25c00 {
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb8a08f..e9b2d3b37ca4 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -70,8 +70,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index c339771bb22e..dfe145a3d05a 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -70,8 +70,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8288de..17e6a683e678 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -86,8 +86,8 @@ rtc@68 {
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 96a021cebd97..1d1bc8dbb342 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21d471e..d5d9a273bb6d 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de35ddfb..670363bca917 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -90,8 +90,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12d83c2..f15cd38c849e 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -64,8 +64,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..16b212cc8a2a 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@ &ehci0 {
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix NAND nodes names
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (13 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
                   ` (34 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafał Miłecki, Florian Fainelli, Sasha Levin, devicetree

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm63138.dtsi    | 2 +-
 arch/arm/boot/dts/bcm963138dvt.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@ serial1: serial@620 {
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@ &serial1 {
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: Fix NAND nodes names
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (14 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
                   ` (33 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Rafał Miłecki, Florian Fainelli, Sasha Levin,
	devicetree, linux-arm-kernel

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ]

This matches nand-controller.yaml requirements.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index dd71ab08136b..30574101471a 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@ amac0: ethernet@22000 {
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (15 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
                   ` (32 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Uwe Kleine-König, Shawn Guo, Sasha Levin, devicetree,
	linux-arm-kernel

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit e0cdd26af8eb9001689a4cde4f72c61c1c4b06be ]

The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as
done for all the other pins with GPIO functionality. Fix for consistency.

There are no mainline users that needs adaption.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f4516ccf2c1a..1e03b0f9b954 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -544,31 +544,31 @@
 #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
 #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
 #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
 #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
 #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
 #define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
 
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
 #define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
 #define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
 #define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
 #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
 
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
 #define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
 #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
 
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
 #define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
 #define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
 #define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
 #define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
 
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
 #define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
 #define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
 #define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (16 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
                   ` (31 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Primoz Fiser, Shawn Guo, Sasha Levin, devicetree, linux-arm-kernel

From: Primoz Fiser <primoz.fiser@norik.com>

[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ]

Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.

Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 6678b97b1007..3617089dbe36 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@ pinctrl_uart3: uart3grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -403,6 +403,7 @@ &reg_soc {
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (17 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
                   ` (30 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jonathan Neuschäfer, Fabio Estevam, Shawn Guo, Sasha Levin,
	linux-arm-kernel

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ]

The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c,
is imx5_cpu_suspend_info.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/suspend-imx53.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (18 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build Sasha Levin
                   ` (29 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Bixuan Cui, Hulk Robot, Alexandre Belloni, Sasha Levin, linux-rtc

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 206e04ec7539e7bfdde9aa79a7cde656c9eb308e ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mxc_v2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c
index 91534560fe2a..d349cef09cb7 100644
--- a/drivers/rtc/rtc-mxc_v2.c
+++ b/drivers/rtc/rtc-mxc_v2.c
@@ -373,6 +373,7 @@ static const struct of_device_id mxc_ids[] = {
 	{ .compatible = "fsl,imx53-rtc", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mxc_ids);
 
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (19 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
                   ` (28 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Masahiro Yamada, Sasha Levin, linux-kbuild

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 174a1dcc96429efce4ef7eb2f5c4506480da2182 ]

When building with 'make -s', no output to stdout should be printed.

As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.

I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.

Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.

[Note about this implementation]

'exec >/dev/null;' may look somewhat tricky, but this has a reason.

Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:

  cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null

... but it would not work if $(cmd_$(1)) itself contains a redirection.

For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.

It would be expanded into:

  echo "#include <asm-generic/$*.h>" > $@ >/dev/null

Then, the target file gets empty because the string will go to /dev/null
instead of $@.

Next, I tried this:

  cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null

The form above would be expanded into:

  { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null

This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.

When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:

  set -e;  { ; } >/dev/null

..., which causes an syntax error.

I also tried this:

  cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null

... but this causes a syntax error for the same reason.

So, finally I adopted:

  cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))

[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Kbuild.include | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 7da10afc92c6..b14a7d4a2f05 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -182,8 +182,13 @@ clean := -f $(srctree)/scripts/Makefile.clean obj
 echo-cmd = $(if $($(quiet)cmd_$(1)),\
 	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
 
+# sink stdout for 'make -s'
+       redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
 # printing commands
-cmd = @set -e; $(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
 
 ###
 # if_changed      - execute command if any prerequisite is newer than
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (20 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
                   ` (27 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit fb97f63106f3174992a22fe5e42dda96a0810750 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +-
 arch/arm/boot/dts/am335x-boneblue.dts           | 2 +-
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 4 ++--
 arch/arm/boot/dts/am335x-icev2.dts              | 4 ++--
 arch/arm/boot/dts/am335x-shc.dts                | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 3124d94c0b3c..3056c3e3e312 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -102,7 +102,7 @@ bluetooth {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 2f6652ef9a15..8b98aa2d9588 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -435,7 +435,7 @@ &dcan1 {
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 4092cd193b8a..8d85c6a851c3 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -102,7 +102,7 @@ bluetooth {
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -119,7 +119,7 @@ ls_buf_en {
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 204bccfcc110..1e52dfe4f2d3 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -445,14 +445,14 @@ &uart3 {
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 5b0368504015..852cf61478e6 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -144,14 +144,14 @@ ehrpwm1: pwm@200 {
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -160,14 +160,14 @@ hmtc_prog {
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio hog names with dt-schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (21 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
                   ` (26 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts  | 4 ++--
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 811c8cae315b..acc4c2760f46 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -802,7 +802,7 @@ &gpio0 {
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -835,7 +835,7 @@ &gpio5 {
 	status = "okay";
 	ti,no-reset-on-init;
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a6fbc088daa8..45a44c705a70 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -717,7 +717,7 @@ &gpio2 {
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: align gpio hog names with dt-schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (22 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
                   ` (25 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit cfb4ab3b5df86c6001127346d8331f5e87012f91 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@ &uart3 {
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@ pps {
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (23 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
                   ` (24 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4823117cb80eedf31ddbc126b9bd92e707bd9a26 ]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 68ac04641bdb..c73f32e8ca0f 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@ sound: sound {
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (24 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
                   ` (23 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Geert Uytterhoeven, Laurent Pinchart, Tony Lindgren, Sasha Levin,
	linux-omap, devicetree

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]

The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index de7f85efaa51..498ccb46bca8 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -332,7 +332,7 @@ pcf_hdmi: gpio@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index fabeb7704753..88178a64b04f 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -158,7 +158,7 @@ &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..3638e0cefe38 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -261,7 +261,7 @@ pcf_hdmi: pcf8575@26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..9bcb91841a02 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -292,7 +292,7 @@ pcf_hdmi: pcf8575@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (25 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
                   ` (22 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 5 ++---
 arch/arm/boot/dts/dra7-l4.dtsi            | 4 ++--
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761aeded..e86d4795e024 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -611,12 +611,11 @@ &mcasp3 {
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index bc702579488b..3f845a8531f4 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1326,7 +1326,7 @@ gpio8: gpio@0 {
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1359,7 +1359,7 @@ gpio2: gpio@0 {
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (26 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
                   ` (21 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Grygorii Strashko, Tony Lindgren, Sasha Levin, linux-omap, devicetree

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ]

The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 ++++-
 arch/arm/boot/dts/am437x-l4.dtsi    | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index acc4c2760f46..537c9eb8b748 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -829,11 +829,14 @@ &gpio4 {
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	sel-lcd-hdmi-hog {
 		/*
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index bbe15775fccd..6c2949991e29 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2077,7 +2077,7 @@ gpio4: gpio@0 {
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio6";
 			reg = <0x22000 0x4>,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (27 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
                   ` (20 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexandre Torgue, Sasha Levin, devicetree, linux-stm32, linux-arm-kernel

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ]

Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.

Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32429i-eval.dts  | 8 +++-----
 arch/arm/boot/dts/stm32746g-eval.dts  | 6 ++----
 arch/arm/boot/dts/stm32f429-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f469-disco.dts | 6 ++----
 arch/arm/boot/dts/stm32f769-disco.dts | 6 ++----
 5 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index ba08624c6237..4f45e71a1e4d 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -112,17 +112,15 @@ blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 2b1664884ae7..8d64b52838c0 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@ blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index e19d0fe7dbda..49ae2d72afc9 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -79,12 +79,10 @@ green {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index c6dc6d1a051b..0ce450123dda 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@ blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 6f1d0ac8c31c..a4284b761e7f 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@ red {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (28 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
                   ` (19 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexandre Torgue, Sasha Levin, devicetree, linux-stm32, linux-arm-kernel

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ]

This prevent warning observed with "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format
error, expected "40023800"

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5c8a826b3195..1476d3eaf6fa 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -696,7 +696,7 @@ crc: crc@40023000 {
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (29 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
                   ` (18 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexandre Torgue, Fabrice Gasnier, Sasha Levin, devicetree,
	linux-stm32, linux-arm-kernel

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ]

Prevent warning seen with "make dtbs_check W=1" command:

Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 8 --------
 arch/arm/boot/dts/stm32f746.dtsi | 8 --------
 arch/arm/boot/dts/stm32h743.dtsi | 4 ----
 3 files changed, 20 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 1476d3eaf6fa..dd41342ef017 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -623,8 +619,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -639,8 +633,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index d26f93f8b9c2..974dc71b2fe3 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -533,8 +529,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -549,8 +543,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index c065266ee377..82a234c64b8b 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -438,8 +438,6 @@ trigger@2 {
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -454,8 +452,6 @@ pwm {
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (30 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
                   ` (17 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Sudeep Holla, Sasha Levin, linux-arm-kernel, devicetree

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ]

The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.

Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index c47f76b01c4b..65bcdd0fe78a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -537,13 +537,13 @@ scpi {
 		clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi-dvfs {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
-			scpi_clk: scpi-clk {
+			scpi_clk: clocks-1 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
@@ -551,7 +551,7 @@ scpi_clk: scpi-clk {
 			};
 		};
 
-		scpi_devpd: scpi-power-domains {
+		scpi_devpd: power-controller {
 			compatible = "arm,scpi-power-domains";
 			num-domains = <2>;
 			#power-domain-cells = <1>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (31 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
                   ` (16 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
	linux-rockchip, devicetree

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ]

A test with rockchip-io-domain.yaml gives notifications
for supply properties in io-domains nodes.
Fix them all into ".*-supply$" format.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +-
 arch/arm/boot/dts/rk3288-vyasa.dts      | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 9f9e2bfd1295..7b79a21f9bbb 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@ &io_domains {
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f97ddc..acfb7dc2df56 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -357,10 +357,10 @@ &io_domains {
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (32 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
                   ` (15 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexandre Torgue, Sasha Levin, devicetree, linux-stm32, linux-arm-kernel

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ]

Replace upper case by lower case in i2c nodes name.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f746.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 974dc71b2fe3..60680fcf8eb3 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -362,9 +362,9 @@ i2c2: i2c@40005800 {
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (33 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
                   ` (14 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Alexandre Torgue, Sasha Levin, devicetree, linux-stm32, linux-arm-kernel

From: Alexandre Torgue <alexandre.torgue@foss.st.com>

[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ]

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index f98e0370c0bc..eca469a64a97 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1311,12 +1311,6 @@ crc1: crc@58009000 {
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1339,6 +1333,12 @@ ethernet0: ethernet@5800a000 {
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usbh-ohci@5800c000 {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (34 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
@ 2021-07-14 19:44 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: " Sasha Levin
                   ` (13 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:44 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Thierry Reding, Sasha Levin, linux-tegra

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit e2d0ee225e49a5553986f3138dd2803852a31fd5 ]

The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/fuse/fuse-tegra30.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index 9c3ef0a02fd4..15060c847ecc 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -36,7 +36,8 @@
     defined(CONFIG_ARCH_TEGRA_132_SOC) || \
     defined(CONFIG_ARCH_TEGRA_210_SOC) || \
     defined(CONFIG_ARCH_TEGRA_186_SOC) || \
-    defined(CONFIG_ARCH_TEGRA_194_SOC)
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC)
 static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
 {
 	if (WARN_ON(!fuse->base))
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: Fix Tegra234-only builds
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (35 preceding siblings ...)
  2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
                   ` (12 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Thierry Reding, Sasha Levin, linux-tegra

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit bd778b893963d67d7eb01f49d84ffcd3eaf229dd ]

The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/tegra/Makefile       | 1 +
 drivers/firmware/tegra/bpmp-private.h | 3 ++-
 drivers/firmware/tegra/bpmp.c         | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 49c87e00fafb..620cf3fdd607 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -3,6 +3,7 @@ tegra-bpmp-y			= bpmp.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC)	+= bpmp-tegra210.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC)	+= bpmp-tegra186.o
 tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
 obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
 obj-$(CONFIG_TEGRA_IVC)		+= ivc.o
diff --git a/drivers/firmware/tegra/bpmp-private.h b/drivers/firmware/tegra/bpmp-private.h
index 54d560c48398..182bfe396516 100644
--- a/drivers/firmware/tegra/bpmp-private.h
+++ b/drivers/firmware/tegra/bpmp-private.h
@@ -24,7 +24,8 @@ struct tegra_bpmp_ops {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
 #endif
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 19c56133234b..afde06b31387 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -808,7 +808,8 @@ static const struct dev_pm_ops tegra_bpmp_pm_ops = {
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
-    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
 static const struct tegra_bpmp_soc tegra186_soc = {
 	.channels = {
 		.cpu_tx = {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (36 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: " Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
                   ` (11 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Mian Yousaf Kaukab, Shawn Guo, Sasha Levin, linux-arm-kernel, devicetree

From: Mian Yousaf Kaukab <ykaukab@suse.de>

[ Upstream commit 8240c972c1798ea013cbb407722295fc826b3584 ]

On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:

[   10.471363] couldn't get idr
[   10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[   10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[   10.471708] fsl-dspi: probe of 2100000.spi failed with error -16

Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa84a..cdb2fa47637d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -501,7 +501,6 @@ dspi: spi@2100000 {
 			clocks = <&clockgen 4 3>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
-			bus-num = <0>;
 		};
 
 		esdhc: esdhc@2140000 {
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (37 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
                   ` (10 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Lucas Stach, Shawn Guo, Sasha Levin, devicetree, linux-arm-kernel

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ]

This fixes multiple issues with the current non-existent PCIe clock setup:

The controller can run at up to 250MHz, so use a parent that provides this
clock.

The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.

The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index f1011bcd5ed5..3dae8d7c7619 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1056,6 +1056,14 @@ pcie0: pcie@33800000 {
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
@@ -1085,6 +1093,14 @@ pcie1: pcie@33c00000 {
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
 			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
 			status = "disabled";
 		};
 
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister()
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (38 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
                   ` (9 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yang Yingliang, Daniel Lezcano, Sasha Levin, linux-pm

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]

Fix the following make W=1 kernel build warning:

  drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index c28271817e43..f526ce31f5a2 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1368,7 +1368,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 /**
- * thermal_device_unregister - removes the registered thermal zone device
+ * thermal_zone_device_unregister - removes the registered thermal zone device
  * @tz: the thermal zone device to remove
  */
 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (39 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
                   ` (8 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Matthias Maennich, Masahiro Yamada, Sasha Levin, linux-kbuild

From: Matthias Maennich <maennich@google.com>

[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ]

To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.

If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.

Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.

[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html

Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mkcompile_h | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index d1d757c6edf4..06c1e9e3bc38 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -80,15 +80,23 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
 # Only replace the real compile.h if the new one is different,
 # in order to preserve the timestamp and avoid unnecessary
 # recompilations.
-# We don't consider the file changed if only the date/time changed.
+# We don't consider the file changed if only the date/time changed,
+# unless KBUILD_BUILD_TIMESTAMP was explicitly set (e.g. for
+# reproducible builds with that value referring to a commit timestamp).
 # A kernel config change will increase the generation number, thus
 # causing compile.h to be updated (including date/time) due to the
 # changed comment in the
 # first line.
 
+if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then
+   IGNORE_PATTERN="UTS_VERSION"
+else
+   IGNORE_PATTERN="NOT_A_PATTERN_TO_BE_MATCHED"
+fi
+
 if [ -r $TARGET ] && \
-      grep -v 'UTS_VERSION' $TARGET > .tmpver.1 && \
-      grep -v 'UTS_VERSION' .tmpcompile > .tmpver.2 && \
+      grep -v $IGNORE_PATTERN $TARGET > .tmpver.1 && \
+      grep -v $IGNORE_PATTERN .tmpcompile > .tmpver.2 && \
       cmp -s .tmpver.1 .tmpver.2; then
    rm -f .tmpcompile
 else
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (40 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
                   ` (7 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Krzysztof Kozlowski, Alexandre Belloni, Sasha Levin, linux-rtc

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 742b0d7e15c333303daad4856de0764f4bc83601 ]

Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-max77686.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d5a0e27dd0a0..9e27f5a01197 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -707,8 +707,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
 
 add_rtc_irq:
 	ret = regmap_add_irq_chip(info->rtc_regmap, info->rtc_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
-				  IRQF_SHARED, 0, info->drv_data->rtc_irq_chip,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  0, info->drv_data->rtc_irq_chip,
 				  &info->rtc_irq_data);
 	if (ret < 0) {
 		dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (41 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
                   ` (6 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Colin Ian King, Martin K . Petersen, Sasha Levin, linux-scsi

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ]

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 4190a025381a..27d85ed82977 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -493,7 +493,7 @@ ahc_inq(struct ahc_softc *ahc, u_int port)
 	return ((ahc_inb(ahc, port))
 	      | (ahc_inb(ahc, port+1) << 8)
 	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24)
+	      | (((uint64_t)ahc_inb(ahc, port+3)) << 24)
 	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (42 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
                   ` (5 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Yufen Yu, Wu Bo, John Garry, Jason Yan, Martin K . Petersen,
	Sasha Levin, linux-scsi

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ]

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aic94xx/aic94xx_init.c    | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 drivers/scsi/isci/init.c               | 1 +
 drivers/scsi/libsas/sas_scsi_host.c    | 9 +++++++++
 drivers/scsi/mvsas/mv_init.c           | 1 +
 drivers/scsi/pm8001/pm8001_init.c      | 1 +
 8 files changed, 16 insertions(+)

diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index f5781e31f57c..b68dfeb952ee 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -52,6 +52,7 @@ static struct scsi_host_template aic94xx_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler	= sas_eh_device_reset_handler,
 	.eh_target_reset_handler	= sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.track_queue_depth	= 1,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3364ae0b9bfe..08fed7c416ac 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1768,6 +1768,7 @@ static struct scsi_host_template sht_v1_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= host_attrs_v1_hw,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 8e96a257e439..11c75881bd89 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3542,6 +3542,7 @@ static struct scsi_host_template sht_v2_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= host_attrs_v2_hw,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 916447f3c607..13f314fa757e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3064,6 +3064,7 @@ static struct scsi_host_template sht_v3_hw = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= host_attrs_v3_hw,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 1727d0c71b12..c33bcf85fb21 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -166,6 +166,7 @@ static struct scsi_host_template isci_sht = {
 	.eh_abort_handler		= sas_eh_abort_handler,
 	.eh_device_reset_handler        = sas_eh_device_reset_handler,
 	.eh_target_reset_handler        = sas_eh_target_reset_handler,
+	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
 	.shost_attrs			= isci_host_attrs,
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index bec83eb8ab87..081f3145fe14 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
 		blk_abort_request(sc->request);
 }
 
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+	if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+		return -ENXIO;
+
+	return 0;
+}
+
 void sas_target_destroy(struct scsi_target *starget)
 {
 	struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
 EXPORT_SYMBOL_GPL(sas_phy_reset);
 EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
 EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
 EXPORT_SYMBOL_GPL(sas_target_destroy);
 EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index da719b0694dc..52405ce58ade 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -45,6 +45,7 @@ static struct scsi_host_template mvs_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= mvst_host_attrs,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 8882ba33ca87..1f41537d52a5 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -86,6 +86,7 @@ static struct scsi_host_template pm8001_sht = {
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
 	.eh_target_reset_handler = sas_eh_target_reset_handler,
+	.slave_alloc		= sas_slave_alloc,
 	.target_destroy		= sas_target_destroy,
 	.ioctl			= sas_ioctl,
 	.shost_attrs		= pm8001_host_attrs,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (43 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception Sasha Levin
                   ` (4 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christophe JAILLET, Martin K . Petersen, Sasha Levin, linux-scsi

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c7fa2c855e892721bafafdf6393342c000e0ef77 ]

Fix a few style issues reported by checkpatch.pl:

 - Avoid duplicated word in comment.

 - Add missing space in messages.

 - Unneeded continuation line character.

 - Unneeded extra spaces.

 - Unneeded log message after memory allocation failure.

Link: https://lore.kernel.org/r/8cb62f0eb96ec7ce7a73fe97cb4490dd5121ecff.1623482155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/be2iscsi/be_main.c | 102 ++++++++++++--------------------
 1 file changed, 38 insertions(+), 64 deletions(-)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 0760d0bd8a10..7ddbb7253136 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -143,8 +143,7 @@ DEVICE_ATTR(beiscsi_##_name, S_IRUGO | S_IWUSR,\
 	      beiscsi_##_name##_disp, beiscsi_##_name##_store)
 
 /*
- * When new log level added update the
- * the MAX allowed value for log_enable
+ * When new log level added update MAX allowed value for log_enable
  */
 BEISCSI_RW_ATTR(log_enable, 0x00,
 		0xFF, 0x00, "Enable logging Bit Mask\n"
@@ -825,9 +824,8 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 					  &phwi_context->be_eq[i]);
 			if (ret) {
 				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : beiscsi_init_irqs-Failed to"
-					    "register msix for i = %d\n",
-					    i);
+					    "BM_%d : %s-Failed to register msix for i = %d\n",
+					    __func__, i);
 				kfree(phba->msi_name[i]);
 				goto free_msix_irqs;
 			}
@@ -841,9 +839,9 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 		ret = request_irq(pci_irq_vector(pcidev, i), be_isr_mcc, 0,
 				  phba->msi_name[i], &phwi_context->be_eq[i]);
 		if (ret) {
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT ,
-				    "BM_%d : beiscsi_init_irqs-"
-				    "Failed to register beiscsi_msix_mcc\n");
+			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+				    "BM_%d : %s-Failed to register beiscsi_msix_mcc\n",
+				    __func__);
 			kfree(phba->msi_name[i]);
 			goto free_msix_irqs;
 		}
@@ -853,8 +851,8 @@ static int beiscsi_init_irqs(struct beiscsi_hba *phba)
 				  "beiscsi", phba);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_init_irqs-"
-				    "Failed to register irq\\n");
+				    "BM_%d : %s-Failed to register irq\n",
+				    __func__);
 			return ret;
 		}
 	}
@@ -1030,7 +1028,7 @@ free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
 			       phba->params.wrbs_per_cxn);
 	beiscsi_log(phba, KERN_INFO,
 		    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-		    "BM_%d : FREE WRB: pwrb_handle=%p free_index=0x%x"
+		    "BM_%d : FREE WRB: pwrb_handle=%p free_index=0x%x "
 		    "wrb_handles_available=%d\n",
 		    pwrb_handle, pwrb_context->free_index,
 		    pwrb_context->wrb_handles_available);
@@ -1374,7 +1372,7 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
 			    "BM_%d :\t\t No HWH_TYPE_LOGIN Expected in"
-			    " hwi_complete_cmd- Solicited path\n");
+			    " %s- Solicited path\n", __func__);
 		break;
 
 	case HWH_TYPE_NOP:
@@ -1384,8 +1382,8 @@ static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
 	default:
 		beiscsi_log(phba, KERN_WARNING,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_IO,
-			    "BM_%d : In hwi_complete_cmd, unknown type = %d"
-			    "wrb_index 0x%x CID 0x%x\n", type,
+			    "BM_%d : In %s, unknown type = %d "
+			    "wrb_index 0x%x CID 0x%x\n", __func__, type,
 			    csol_cqe.wrb_index,
 			    csol_cqe.cid);
 		break;
@@ -1883,9 +1881,9 @@ unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq, int budget)
 				cid = AMAP_GET_BITS(
 						    struct amap_i_t_dpdu_cqe_v2,
 						    cid, sol);
-			 else
-				 cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
-						     cid, sol);
+			else
+				cid = AMAP_GET_BITS(struct amap_sol_cqe_v2,
+						    cid, sol);
 		}
 
 		cri_index = BE_GET_CRI_FROM_CID(cid);
@@ -2010,8 +2008,7 @@ unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq, int budget)
 		default:
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Invalid CQE Event Received Code : %d"
-				    "CID 0x%x...\n",
+				    "BM_%d : Invalid CQE Event Received Code : %d CID 0x%x...\n",
 				    code, cid);
 			break;
 		}
@@ -3001,7 +2998,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 	void *eq_vaddress;
 	dma_addr_t paddr;
 
-	num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
+	num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries *
 				      sizeof(struct be_eq_entry));
 
 	if (phba->pcidev->msix_enabled)
@@ -3034,8 +3031,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 					    BEISCSI_EQ_DELAY_DEF);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_cmd_eq_create"
-				    "Failed for EQ\n");
+				    "BM_%d : beiscsi_cmd_eq_create Failed for EQ\n");
 			goto create_eq_error;
 		}
 
@@ -3068,7 +3064,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 	int ret = -ENOMEM;
 	dma_addr_t paddr;
 
-	num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
+	num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries *
 				      sizeof(struct sol_cqe));
 
 	for (i = 0; i < phba->num_cpus; i++) {
@@ -3090,8 +3086,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 				    sizeof(struct sol_cqe), cq_vaddress);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : be_fill_queue Failed "
-				    "for ISCSI CQ\n");
+				    "BM_%d : be_fill_queue Failed for ISCSI CQ\n");
 			goto create_cq_error;
 		}
 
@@ -3100,8 +3095,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 					    false, 0);
 		if (ret) {
 			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-				    "BM_%d : beiscsi_cmd_eq_create"
-				    "Failed for ISCSI CQ\n");
+				    "BM_%d : beiscsi_cmd_eq_create Failed for ISCSI CQ\n");
 			goto create_cq_error;
 		}
 		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
@@ -3226,8 +3220,8 @@ beiscsi_create_def_data(struct beiscsi_hba *phba,
 		    phwi_context->be_def_dataq[ulp_num].id);
 
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-		    "BM_%d : DEFAULT PDU DATA RING CREATED"
-		    "on ULP : %d\n", ulp_num);
+		    "BM_%d : DEFAULT PDU DATA RING CREATED on ULP : %d\n",
+		    ulp_num);
 	return 0;
 }
 
@@ -3253,13 +3247,13 @@ beiscsi_post_template_hdr(struct beiscsi_hba *phba)
 
 			if (status != 0) {
 				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Post Template HDR Failed for"
+					    "BM_%d : Post Template HDR Failed for "
 					    "ULP_%d\n", ulp_num);
 				return status;
 			}
 
 			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-				    "BM_%d : Template HDR Pages Posted for"
+				    "BM_%d : Template HDR Pages Posted for "
 				    "ULP_%d\n", ulp_num);
 		}
 	}
@@ -3374,18 +3368,17 @@ beiscsi_create_wrb_rings(struct beiscsi_hba *phba,
 		} else {
 			idx++;
 			wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
-			pa_addr_lo = mem_descr->mem_array[idx].\
+			pa_addr_lo = mem_descr->mem_array[idx].
 					bus_address.u.a64.address;
 			num_wrb_rings = mem_descr->mem_array[idx].size /
 					(phba->params.wrbs_per_cxn *
 					sizeof(struct iscsi_wrb));
 			pwrb_arr[num].virtual_address = wrb_vaddr;
-			pwrb_arr[num].bus_address.u.a64.address\
-						= pa_addr_lo;
+			pwrb_arr[num].bus_address.u.a64.address = pa_addr_lo;
 			pwrb_arr[num].size = phba->params.wrbs_per_cxn *
 						 sizeof(struct iscsi_wrb);
 			wrb_vaddr += pwrb_arr[num].size;
-			pa_addr_lo   += pwrb_arr[num].size;
+			pa_addr_lo += pwrb_arr[num].size;
 			num_wrb_rings--;
 		}
 	}
@@ -3939,7 +3932,7 @@ static int beiscsi_init_sgl_handle(struct beiscsi_hba *phba)
 		idx++;
 	}
 	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-		    "BM_%d : phba->io_sgl_hndl_avbl=%d"
+		    "BM_%d : phba->io_sgl_hndl_avbl=%d "
 		    "phba->eh_sgl_hndl_avbl=%d\n",
 		    phba->io_sgl_hndl_avbl,
 		    phba->eh_sgl_hndl_avbl);
@@ -3997,13 +3990,8 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 					       GFP_KERNEL);
 
 			if (!ptr_cid_info) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Failed to allocate memory"
-					    "for ULP_CID_INFO for ULP : %d\n",
-					    ulp_num);
 				ret = -ENOMEM;
 				goto free_memory;
-
 			}
 
 			/* Allocate memory for CID array */
@@ -4012,10 +4000,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 					sizeof(*ptr_cid_info->cid_array),
 					GFP_KERNEL);
 			if (!ptr_cid_info->cid_array) {
-				beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-					    "BM_%d : Failed to allocate memory"
-					    "for CID_ARRAY for ULP : %d\n",
-					    ulp_num);
 				kfree(ptr_cid_info);
 				ptr_cid_info = NULL;
 				ret = -ENOMEM;
@@ -4033,9 +4017,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 				 sizeof(struct iscsi_endpoint *),
 				 GFP_KERNEL);
 	if (!phba->ep_array) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to allocate memory in "
-			    "hba_setup_cid_tbls\n");
 		ret = -ENOMEM;
 
 		goto free_memory;
@@ -4045,10 +4026,6 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
 				   sizeof(struct beiscsi_conn *),
 				   GFP_KERNEL);
 	if (!phba->conn_table) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to allocate memory in"
-			    "hba_setup_cid_tbls\n");
-
 		kfree(phba->ep_array);
 		phba->ep_array = NULL;
 		ret = -ENOMEM;
@@ -4401,7 +4378,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 		if (!io_task->psgl_handle) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Alloc of IO_SGL_ICD Failed"
+				    "BM_%d : Alloc of IO_SGL_ICD Failed "
 				    "for the CID : %d\n",
 				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_hndls;
@@ -4412,7 +4389,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 		if (!io_task->pwrb_handle) {
 			beiscsi_log(phba, KERN_ERR,
 				    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-				    "BM_%d : Alloc of WRB_HANDLE Failed"
+				    "BM_%d : Alloc of WRB_HANDLE Failed "
 				    "for the CID : %d\n",
 				    beiscsi_conn->beiscsi_conn_cid);
 			goto free_io_hndls;
@@ -4428,10 +4405,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_IO |
 						    BEISCSI_LOG_CONFIG,
-						    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+						    "BM_%d : Alloc of MGMT_SGL_ICD Failed "
 						    "for the CID : %d\n",
-						    beiscsi_conn->
-						    beiscsi_conn_cid);
+						    beiscsi_conn->beiscsi_conn_cid);
 					goto free_hndls;
 				}
 
@@ -4446,10 +4422,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 					beiscsi_log(phba, KERN_ERR,
 						    BEISCSI_LOG_IO |
 						    BEISCSI_LOG_CONFIG,
-						    "BM_%d : Alloc of WRB_HANDLE Failed"
+						    "BM_%d : Alloc of WRB_HANDLE Failed "
 						    "for the CID : %d\n",
-						    beiscsi_conn->
-						    beiscsi_conn_cid);
+						    beiscsi_conn->beiscsi_conn_cid);
 					goto free_mgmt_hndls;
 				}
 				beiscsi_conn->plogin_wrb_handle =
@@ -4467,10 +4442,9 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 				beiscsi_log(phba, KERN_ERR,
 					    BEISCSI_LOG_IO |
 					    BEISCSI_LOG_CONFIG,
-					    "BM_%d : Alloc of MGMT_SGL_ICD Failed"
+					    "BM_%d : Alloc of MGMT_SGL_ICD Failed "
 					    "for the CID : %d\n",
-					    beiscsi_conn->
-					    beiscsi_conn_cid);
+					    beiscsi_conn->beiscsi_conn_cid);
 				goto free_hndls;
 			}
 			io_task->pwrb_handle =
@@ -4480,7 +4454,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 			if (!io_task->pwrb_handle) {
 				beiscsi_log(phba, KERN_ERR,
 					    BEISCSI_LOG_IO | BEISCSI_LOG_CONFIG,
-					    "BM_%d : Alloc of WRB_HANDLE Failed"
+					    "BM_%d : Alloc of WRB_HANDLE Failed "
 					    "for the CID : %d\n",
 					    beiscsi_conn->beiscsi_conn_cid);
 				goto free_mgmt_hndls;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (44 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
                   ` (3 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Javed Hasan, Martin K . Petersen, Sasha Levin, linux-scsi

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ]

Fix array index out of bound exception in fc_rport_prli_resp().

Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 64500417c22e..326bd609a3d1 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -1160,6 +1160,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x spp_type 0x%x\n",
 			     pp->spp.spp_flags, pp->spp.spp_type);
+
 		rdata->spp_type = pp->spp.spp_type;
 		if (resp_code != FC_SPP_RESP_ACK) {
 			if (resp_code == FC_SPP_RESP_CONF)
@@ -1182,11 +1183,13 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		/*
 		 * Call prli provider if we should act as a target
 		 */
-		prov = fc_passive_prov[rdata->spp_type];
-		if (prov) {
-			memset(&temp_spp, 0, sizeof(temp_spp));
-			prov->prli(rdata, pp->prli.prli_spp_len,
-				   &pp->spp, &temp_spp);
+		if (rdata->spp_type < FC_FC4_PROV_SIZE) {
+			prov = fc_passive_prov[rdata->spp_type];
+			if (prov) {
+				memset(&temp_spp, 0, sizeof(temp_spp));
+				prov->prli(rdata, pp->prli.prli_spp_len,
+					   &pp->spp, &temp_spp);
+			}
 		}
 		/*
 		 * Check if the image pair could be established
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (45 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
                   ` (2 subsequent siblings)
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Javed Hasan, Martin K . Petersen, Sasha Levin, linux-scsi

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ]

A race condition was observed between qedf_cleanup_fcport() and
qedf_process_error_detect()->qedf_initiate_abts():

 [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0
 [2069091.233420] Oops: 0000 [#1] SMP
 [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P           OE  ------------   3.10.0-1160.25.1.el7.x86_64 #1
 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
 [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000
 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>]  [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.443666] RSP: 0018:ffff9bacaef9fdb8  EFLAGS: 00010246
 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310
 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8
 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000
 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18
 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040
 [2069091.529472] FS:  0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000
 [2069091.543926] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0
 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [2069091.602007] PKRU: 00000000
 [2069091.616010] Call Trace:
 [2069091.629902]  [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf]
 [2069091.643941]  [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf]
 [2069091.657948]  [<ffffffff85ebddcf>] process_one_work+0x17f/0x440
 [2069091.672111]  [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0
 [2069091.686057]  [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0
 [2069091.700033]  [<ffffffff85ec5da1>] kthread+0xd1/0xe0
 [2069091.713891]  [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40

Add check in qedf_process_error_detect(). When flush is active, let the
cmds be completed from the cleanup contex.

Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_io.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index e749a2dcaad7..4e8a284e606c 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1504,9 +1504,19 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 {
 	int rval;
 
+	if (io_req == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
+		return;
+	}
+
+	if (io_req->fcport == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "fcport is NULL.\n");
+		return;
+	}
+
 	if (!cqe) {
 		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
-			  "cqe is NULL for io_req %p\n", io_req);
+			"cqe is NULL for io_req %p\n", io_req);
 		return;
 	}
 
@@ -1522,6 +1532,16 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_buf_off),
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_id));
 
+	/* When flush is active, let the cmds be flushed out from the cleanup context */
+	if (test_bit(QEDF_RPORT_IN_TARGET_RESET, &io_req->fcport->flags) ||
+		(test_bit(QEDF_RPORT_IN_LUN_RESET, &io_req->fcport->flags) &&
+		 io_req->sc_cmd->device->lun == (u64)io_req->fcport->lun_reset_lun)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			"Dropping EQE for xid=0x%x as fcport is flushing",
+			io_req->xid);
+		return;
+	}
+
 	if (qedf->stop_io_on_error) {
 		qedf_stop_all_io(qedf);
 		return;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (46 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Odin Ugedal, Peter Zijlstra, Ben Segall, Sasha Levin

From: Odin Ugedal <odin@uged.al>

[ Upstream commit 72d0ad7cb5bad265adb2014dbe46c4ccb11afaba ]

The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.

This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.

Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d3f4113e87de..94bf2e44a45a 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4786,7 +4786,7 @@ static const u64 cfs_bandwidth_slack_period = 5 * NSEC_PER_MSEC;
 static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 {
 	struct hrtimer *refresh_timer = &cfs_b->period_timer;
-	u64 remaining;
+	s64 remaining;
 
 	/* if the call-back is running a quota refresh is already occurring */
 	if (hrtimer_callback_running(refresh_timer))
@@ -4794,7 +4794,7 @@ static int runtime_refresh_within(struct cfs_bandwidth *cfs_b, u64 min_expire)
 
 	/* is a quota refresh about to occur? */
 	remaining = ktime_to_ns(hrtimer_expires_remaining(refresh_timer));
-	if (remaining < min_expire)
+	if (remaining < (s64)min_expire)
 		return 1;
 
 	return 0;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (47 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Heiko Carstens, Sven Schnelle, Vasily Gorbik, Sasha Levin, linux-s390

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 41d71fe59cce41237f24f3b7bdc1b414069a34ed ]

The existing CALL_ON_STACK() macro allows for subtle bugs:

- There is no type checking of the function that is being called. That
  is: missing or too many arguments do not cause any compile error or
  warning. The same is true if the return type of the called function
  changes. This can lead to quite random bugs.

- Sign and zero extension of arguments is missing. Given that the s390
  C ABI requires that the caller of a function performs proper sign
  and zero extension this can also lead to subtle bugs.

- If arguments to the CALL_ON_STACK() macros contain functions calls
  register corruption can happen due to register asm constructs being
  used.

Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/stacktrace.h | 97 ++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h
index 6836532f8d1a..e192681f83e1 100644
--- a/arch/s390/include/asm/stacktrace.h
+++ b/arch/s390/include/asm/stacktrace.h
@@ -115,6 +115,103 @@ struct stack_frame {
 	r2;								\
 })
 
+#define CALL_LARGS_0(...)						\
+	long dummy = 0
+#define CALL_LARGS_1(t1, a1)						\
+	long arg1  = (long)(t1)(a1)
+#define CALL_LARGS_2(t1, a1, t2, a2)					\
+	CALL_LARGS_1(t1, a1);						\
+	long arg2 = (long)(t2)(a2)
+#define CALL_LARGS_3(t1, a1, t2, a2, t3, a3)				\
+	CALL_LARGS_2(t1, a1, t2, a2);					\
+	long arg3 = (long)(t3)(a3)
+#define CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4)			\
+	CALL_LARGS_3(t1, a1, t2, a2, t3, a3);				\
+	long arg4  = (long)(t4)(a4)
+#define CALL_LARGS_5(t1, a1, t2, a2, t3, a3, t4, a4, t5, a5)		\
+	CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4);			\
+	long arg5 = (long)(t5)(a5)
+
+#define CALL_REGS_0							\
+	register long r2 asm("2") = dummy
+#define CALL_REGS_1							\
+	register long r2 asm("2") = arg1
+#define CALL_REGS_2							\
+	CALL_REGS_1;							\
+	register long r3 asm("3") = arg2
+#define CALL_REGS_3							\
+	CALL_REGS_2;							\
+	register long r4 asm("4") = arg3
+#define CALL_REGS_4							\
+	CALL_REGS_3;							\
+	register long r5 asm("5") = arg4
+#define CALL_REGS_5							\
+	CALL_REGS_4;							\
+	register long r6 asm("6") = arg5
+
+#define CALL_TYPECHECK_0(...)
+#define CALL_TYPECHECK_1(t, a, ...)					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_2(t, a, ...)					\
+	CALL_TYPECHECK_1(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_3(t, a, ...)					\
+	CALL_TYPECHECK_2(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_4(t, a, ...)					\
+	CALL_TYPECHECK_3(__VA_ARGS__);					\
+	typecheck(t, a)
+#define CALL_TYPECHECK_5(t, a, ...)					\
+	CALL_TYPECHECK_4(__VA_ARGS__);					\
+	typecheck(t, a)
+
+#define CALL_PARM_0(...) void
+#define CALL_PARM_1(t, a, ...) t
+#define CALL_PARM_2(t, a, ...) t, CALL_PARM_1(__VA_ARGS__)
+#define CALL_PARM_3(t, a, ...) t, CALL_PARM_2(__VA_ARGS__)
+#define CALL_PARM_4(t, a, ...) t, CALL_PARM_3(__VA_ARGS__)
+#define CALL_PARM_5(t, a, ...) t, CALL_PARM_4(__VA_ARGS__)
+#define CALL_PARM_6(t, a, ...) t, CALL_PARM_5(__VA_ARGS__)
+
+/*
+ * Use call_on_stack() to call a function switching to a specified
+ * stack. Proper sign and zero extension of function arguments is
+ * done. Usage:
+ *
+ * rc = call_on_stack(nr, stack, rettype, fn, t1, a1, t2, a2, ...)
+ *
+ * - nr specifies the number of function arguments of fn.
+ * - stack specifies the stack to be used.
+ * - fn is the function to be called.
+ * - rettype is the return type of fn.
+ * - t1, a1, ... are pairs, where t1 must match the type of the first
+ *   argument of fn, t2 the second, etc. a1 is the corresponding
+ *   first function argument (not name), etc.
+ */
+#define call_on_stack(nr, stack, rettype, fn, ...)			\
+({									\
+	rettype (*__fn)(CALL_PARM_##nr(__VA_ARGS__)) = fn;		\
+	unsigned long frame = current_frame_address();			\
+	unsigned long __stack = stack;					\
+	unsigned long prev;						\
+	CALL_LARGS_##nr(__VA_ARGS__);					\
+	CALL_REGS_##nr;							\
+									\
+	CALL_TYPECHECK_##nr(__VA_ARGS__);				\
+	asm volatile(							\
+		"	lgr	%[_prev],15\n"				\
+		"	lg	15,%[_stack]\n"				\
+		"	stg	%[_frame],%[_bc](15)\n"			\
+		"	brasl	14,%[_fn]\n"				\
+		"	lgr	15,%[_prev]\n"				\
+		: [_prev] "=&d" (prev), CALL_FMT_##nr			\
+		: [_stack] "R" (__stack),				\
+		  [_bc] "i" (offsetof(struct stack_frame, back_chain)),	\
+		  [_frame] "d" (frame),					\
+		  [_fn] "X" (__fn) : CALL_CLOBBER_##nr);		\
+	(rettype)r2;							\
+})
+
 #define CALL_ON_STACK_NORETURN(fn, stack)				\
 ({									\
 	asm volatile(							\
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options()
  2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
                   ` (48 preceding siblings ...)
  2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro Sasha Levin
@ 2021-07-14 19:45 ` Sasha Levin
  49 siblings, 0 replies; 51+ messages in thread
From: Sasha Levin @ 2021-07-14 19:45 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Paulo Alcantara, Steve French, Sasha Levin, linux-cifs, samba-technical

From: Paulo Alcantara <pc@cjr.nz>

[ Upstream commit 03313d1c3a2f086bb60920607ab79ac8f8578306 ]

The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().

Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifs_dfs_ref.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index cc3ada12848d..42125601ebb1 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -151,6 +151,9 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 		return ERR_PTR(-EINVAL);
 
 	if (ref) {
+		if (WARN_ON_ONCE(!ref->node_name || ref->path_consumed < 0))
+			return ERR_PTR(-EINVAL);
+
 		if (strlen(fullpath) - ref->path_consumed) {
 			prepath = fullpath + ref->path_consumed;
 			/* skip initial delimiter */
-- 
2.30.2


^ permalink raw reply	[flat|nested] 51+ messages in thread

end of thread, other threads:[~2021-07-14 20:00 UTC | newest]

Thread overview: 51+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-14 19:44 [PATCH AUTOSEL 5.4 01/51] ARM: dts: gemini: rename mdio to the right name Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 02/51] ARM: dts: gemini: add device_type on pci Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 03/51] ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 04/51] arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 05/51] ARM: dts: rockchip: Fix the timer clocks order Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 06/51] ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 07/51] ARM: dts: rockchip: Fix power-controller node names for rk3066a Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 08/51] ARM: dts: rockchip: Fix power-controller node names for rk3188 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 09/51] ARM: dts: rockchip: Fix power-controller node names for rk3288 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 10/51] arm64: dts: rockchip: Fix power-controller node names for px30 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 11/51] arm64: dts: rockchip: Fix power-controller node names for rk3328 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 12/51] reset: ti-syscon: fix to_ti_syscon_reset_data macro Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 13/51] ARM: brcmstb: dts: fix NAND nodes names Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 14/51] ARM: Cygnus: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 15/51] ARM: NSP: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 16/51] ARM: dts: BCM63xx: Fix " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 17/51] ARM: dts: Hurricane 2: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 18/51] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F] Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 19/51] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 20/51] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 21/51] rtc: mxc_v2: add missing MODULE_DEVICE_TABLE Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 22/51] kbuild: sink stdout from cmd for silent build Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 23/51] ARM: dts: am335x: align GPIO hog names with dt-schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 25/51] ARM: dts: omap3: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 26/51] ARM: dts: omap5-board-common: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 27/51] ARM: dts: dra7x-evm: Align GPIO " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 28/51] ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 29/51] ARM: dts: am437x-gp-evm: " Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 30/51] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 31/51] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 32/51] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 33/51] arm64: dts: juno: Update SCPI nodes as per the YAML schema Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 34/51] ARM: dts: rockchip: fix supply properties in io-domains nodes Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 35/51] ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 36/51] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Sasha Levin
2021-07-14 19:44 ` [PATCH AUTOSEL 5.4 37/51] soc/tegra: fuse: Fix Tegra234-only builds Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 38/51] firmware: tegra: bpmp: " Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 39/51] arm64: dts: ls208xa: remove bus-num from dspi node Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 40/51] arm64: dts: imx8mq: assign PCIe clocks Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 41/51] thermal/core: Correct function name thermal_zone_device_unregister() Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 42/51] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 43/51] rtc: max77686: Do not enforce (incorrect) interrupt trigger type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 44/51] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 45/51] scsi: libsas: Add LUN number check in .slave_alloc callback Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 46/51] scsi: be2iscsi: Fix some missing space in some messages Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 47/51] scsi: libfc: Fix array index out of bound exception Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 48/51] scsi: qedf: Add check to synchronize abort and flush Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 49/51] sched/fair: Fix CFS bandwidth hrtimer expiry type Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 50/51] s390: introduce proper type handling call_on_stack() macro Sasha Levin
2021-07-14 19:45 ` [PATCH AUTOSEL 5.4 51/51] cifs: prevent NULL deref in cifs_compose_mount_options() Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).